# Fuel Tech, Inc.: Form 10-K for the period ended Dec 31, 2010

- Company: [Fuel Tech, Inc.](/companies/ftek.md) (CIK 846913)
- Form: 10-K
- Filed: 2011-03-09
- Accepted by EDGAR: Mar 9, 2011, 17:23 ET
- Period: 2010-12-31
- Accession: 0000950123-11-023713
- Inline XBRL: no
- Main document: https://www.sec.gov/Archives/edgar/data/846913/000095012311023713/y90167e10vk.htm
- All documents and exhibits: https://www.sec.gov/Archives/edgar/data/846913/000095012311023713/

## Business

As filed, 31,099 characters.

As used in this Annual Report on Form 10-K, the terms “we,” “us,” “our,” “the Company,” and “Fuel Tech” refer to Fuel Tech, Inc. and our wholly-owned subsidiaries.

### Fuel Tech

Fuel Tech is a fully integrated company that uses a suite of advanced technologies to provide boiler optimization, efficiency improvement and air pollution reduction and control solutions to utility and industrial customers worldwide. Originally incorporated in 1987 under the laws of the Netherlands Antilles as Fuel-Tech N.V., Fuel Tech became domesticated in the United States on September 30, 2006, and continues as a Delaware corporation with its corporate headquarters at 27601 Bella Vista Parkway, Warrenville, Illinois, 60555-1617. Fuel Tech maintains an Internet website at www.ftek.com. Our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and any amendments to those reports filed or furnished pursuant to Section 13(a) of the Securities Exchange Act of 1934 are made available through our website as soon as reasonably practical after we electronically file or furnish the reports to the Securities and Exchange Commission. Also available on our website are the Company’s Corporate Governance Guidelines and Code of Ethics and Business Conduct, as well as the charters of the audit, compensation and nominating committees of the Board of Directors. All of these documents are available in print without charge to stockholders who request them. Information on our website is not incorporated into this report.

Fuel Tech’s special focus is the worldwide marketing of its nitrogen oxide (NOx) reduction and FUEL CHEM® technologies. The Air Pollution Control (APC) technology segment reduces NOx emissions in flue gas from boilers, incinerators, furnaces and other stationary combustion sources by utilizing combustion optimization techniques and Low NOx and Ultra Low NOx Burners; NOxOUT® and HERT™ High Energy Reagent Technology™ SNCR systems; systems that incorporate ASCR Advanced SCR and CASCADE™ technologies, ULTRA™ and NOxOUT-SCR® technologies; and Ammonia Injection Grid (AIG) and Graduated Straightening Grid (GSG™) technologies. Fuel Tech’s APC technology business is materially dependent on the continued existence and enforcement of worldwide air quality regulations. The FUEL CHEM technology segment improves the efficiency, reliability and environmental status of combustion units by controlling slagging, fouling and corrosion, as well as the formation of sulfur trioxide, ammonium bisulfate, particulate matter (PM2.5), carbon dioxide, NOx and unburned carbon in fly ash through the addition of chemicals into the fuel or via TIFI® Targeted In-Furnace Injection™ programs. Fuel Tech has other technologies, both commercially available and in the development stage, all of which are related to APC and FUEL CHEM processes or are similar in their technological base.

#### American Bailey Corporation

Douglas G. Bailey, Chairman, Chief Executive Officer, President, and Director of Fuel Tech, and Ralph E. Bailey, Director and Chairman Emeritus of Fuel Tech, are stockholders of American Bailey Corporation (ABC), which is a related party. Please refer to Note 9 to the consolidated financial statements in this document for information about transactions between Fuel Tech and ABC. Additionally, see the more detailed information relating to this subject under the caption “Certain Relationships and Related Transactions” in Fuel Tech’s definitive Proxy Statement to be distributed in connection with Fuel Tech’s 2011 Annual Meeting of Stockholders, which information is incorporated by reference.

### Air Pollution Control

#### Regulations and Markets

The U.S. air pollution control market, and more specifically federal and state NOx regulations, currently are the primary drivers in Fuel Tech’s APC technology segment. This market is dependent on air pollution regulations and their continued enforcement. These regulations are based on the Clean Air Act Amendments of 1990 (the “CAAA”), which require reductions in NOx emissions on varying timetables with respect to various sources of emissions. Under the State Implementation Plan (SIP) Call, a regulation promulgated under the Amendments (discussed further below), over 1,000 utility and large industrial boilers in 19 states were required to achieve NOx reduction targets by May 31, 2004.

In 1994, governors of 11 Northeastern states, known collectively as the Ozone Transport Region, signed a Memorandum of Understanding requiring utilities to reduce their NOx emissions by 55% to 65% from 1990 levels by May 1999. In 1998, the Environmental Protection Agency (EPA) announced more stringent regulations. The Ozone Transport SIP Call regulation, designed to mitigate the effects of wind-aided ozone transported from the Midwestern and Southeastern U.S. into the Northeastern non-attainment areas, required, following the litigation described below, 19 states to make even deeper aggregate reductions of 85% from 1990 levels by May 31, 2004. Over 1,000 utility and large industrial boilers were affected by these mandates. Additionally, most other states with non-attainment areas were also required to meet ambient air quality standards for ozone by 2007.

Although the SIP Call was the subject of litigation, an appellate court of the D.C. Circuit upheld the validity of this regulation. This court’s ruling was later affirmed by the U.S. Supreme Court.

In February 2001, the U.S. Supreme Court, in a unanimous decision, upheld EPA’s authority to revise the National Ambient Air Quality Standard (NAAQS) for ozone to 0.080 parts per million averaged through an eight-hour period from the then current 0.120 parts per million for a one-hour period. This more stringent standard provided clarity and impetus for air pollution control efforts well beyond the then current ozone attainment requirement of 2007. In keeping with this trend, the Supreme Court, only days later, denied industry’s attempt to stay the SIP Call, effectively exhausting all means of appeal. The ozone NAAQS is currently 0.075 parts per million averaged over an eight-hour period, and EPA is proposing to reduce the Standard to 0.06 or 0.07 parts per million for the most severe non-attainment areas by 2013.

On December 23, 2003, the EPA proposed a new regulation affecting the SIP Call states by specifying more expansive NOx reduction. This rule, under the name Clean Air Interstate Rule (CAIR), was issued by the EPA on March 10, 2005. CAIR specifies that additional annual NOx reduction requirements be extended to most SIP-affected units in 28 eastern states, while permitting a cap and trade format similar to the SIP Call. The Company estimates an additional 1,300 electric generating units using coal and other fuels to be affected by this rule. In an action related to CAIR, on June 15, 2005, the EPA issued the Clean Air Visibility Rule (CAVR), which is a nationwide initiative to improve federally preserved areas through reduction of NOx and other pollutants. CAVR expands the NOx reduction market to Western states unaffected by CAIR or the SIP Call. Compliance begins in 2013 and CAVR will potentially affect an additional 230 western coal-fired electric-generating units. In addition, CAVR, along with the EPA rule for revised eight-hour ozone attainment, have the potential to impact thousands of boilers and industrial units in multiple industries nationwide for units burning coal and other fuels starting in 2013.

On July 11, 2008, the U.S. District Court of Appeals for the District of Columbia Circuit vacated the CAIR regulations under the CAAA under the premise that the EPA exceeded its authority when the rule was created in 2005. The court found “more than several fatal flaws in the rule” but neither took issue with the concept that NOx emissions are to be controlled nor over the limits and thresholds established by CAIR. In vacating the rule in its entirety, the court remanded to EPA to promulgate a rule consistent with the court’s opinion. On September 24, 2008, the EPA filed a petition for the case to be reviewed by the full Court of Appeals, not just the three judge panel that issued the vacatur ruling in July 2008. On October 22, 2008, the EPA was granted a 15-day period to present a basis as to why the court should reconsider its decision. On December 23, 2008, the D.C. Circuit Court granted the EPA’s petition only to the extent that it remanded the case without vacatur for EPA to conduct further proceedings consistent with the court’s prior opinion. In summary, the court stated that “...allowing CAIR to remain in effect until it is replaced by a rule consistent with our opinion would at least temporarily preserve the environmental values covered by CAIR.”

As a proposed replacement for CAIR, EPA issued a draft Transport Rule in July 2010, which is expected to be finalized by July 2011. CAIR required the affected states to be in year-round NOx emission compliance beginning January 1, 2009. The Transport Rule is expected to tighten NOx regulations starting in 2012, with additional reductions required by 2014. The amount of NOx reduction required by individual sources and the level of trading of NOx allowances under the Transport Rule is unknown, but Fuel Tech’s wide range of NOx reduction technologies provides opportunities with the current scenarios. While we cannot predict the final form of the Transport Rule or new multi-pollutant legislation under consideration by Congress, any unfavorable outcome could have a material adverse effect on our business, results of operations, cash flows, and financial position. However, the primary driver of the Transport Rule is the Federal Clean Air Act which includes National Ambient Air Quality Standards for criteria pollutants including NOx and ozone with emission requirements that continue to tighten. These continue to remain in effect and states must comply with the requirements of this law.

Fuel Tech also sells NOx control systems outside the United States, specifically in Europe and in the Pacific Rim, including the People’s Republic of China (China). Under European Union Directives, certain power plants must come into compliance with specified NOx reduction targets by 2016.

China also represents attractive opportunities for Fuel Tech as the government has set pollution control and energy conservation and efficiency improvements as top priorities. Fuel Tech has viable technologies to help achieve these objectives. China has taken initial steps to reduce NOx emissions on new electric utility units (principally Low NOx Burners and Over-Fire Air systems and Selective Catalytic Reduction (SCR)), and on-going research and demonstration projects are generating cost and performance data for use in tightened standards that are targeted for the near future, both for new and retrofit units. China’s dominant reliance on coal as an energy resource is not expected to change in the foreseeable future. Clean air has been and will continue to be a pressing issue, especially with China’s robust economic growth, expected growth in thermal power production (4% average annual increase through 2020), and an increasingly expanded role in international events and organizations. As part of the Twelfth Five-Year Plan that will be finalized before the end of the first quarter of 2011, China will tighten the pollution control standards for their existing fleet of fossil plants as well as for fossil plants to be built in the future.

In anticipation of the finalization of this plan, China’s Ministry of Environmental Protection has issued several documents describing the specific nature of the regulations to be implemented as part of the Twelfth Five-Year Plan in support of reducing harmful pollutants and further defining the technologies recommended to achieve the reductions. The most recent documents define the regulations for NOx as applying to all thermal power units that have a steaming rate of 65 tons per hour (12 megawatts (MW)) or larger. Newly constructed units and existing units that were approved subsequent to December 31, 2003, must meet the same stringent emission standard, while certain existing units approved prior to December 31, 2003 must meet a standard that is less stringent. In addition, all units that are in Key Regions must achieve the same standard as the newly constructed units. Key Regions are defined as those areas that are highly developed or highly populated and are sensitive to environmental overloading. All existing coal and oil-fired thermal units must comply with the proposed regulation by January 1, 2014 while all new units must comply by January 1, 2012.

These same documents recommend that NOx reduction should be achieved via the use of Low NOx Burners and Over-Fire Air systems in combination with Selective Non-Catalytic Reduction (SNCR) or SCR where appropriate to achieve required emissions levels. The combination of SNCR and SCR technologies in tandem is also considered as a viable technology choice.

While the current documents do not specifically comment on the use of urea as the preferred reducing reagent in the NOx control process in high population density areas, Fuel Tech believes that technologies to convert urea to ammonia will be deployed in Key Regions in support of safety objectives, and this practice has already been implemented in major cities such as Beijing, Guangzhou and Shanghai.

Fuel Tech has established a market position in NOx control resulting from the initial national demonstration projects utilizing CASCADE™ technology at Jiangsu Kanshan (two new 600 MW units), NOxOUT Selective Non-Catalytic Reduction technology at Jiangyin Ligang (four new 600 MW units) and Inner Mongolia (two new 600 MW units), and ULTRA technology on projects in Beijing (multiple projects on units of varying sizes including two district heating units), Zhejiang (four 1000 MW retrofit units), Shannxi (two 660 MW new units) and Liaoning (two 330 MW new units). These projects have established Fuel Tech’s NOx control technologies as being acceptable for use in reducing NOx emissions and have resulted in additional contracts in China. The regulations that will ultimately be established in support of the NOx standards that will be defined as part of the Twelfth Five-Year Plan will offer potential business opportunities for Fuel Tech and its suite of NOx technologies.

The key market dynamic for this product line is the continued use of coal as the principal fuel source for global electricity production. Coal accounts for approximately 50% of all U.S. electricity generation and roughly 80% of Chinese electricity generation. Approximately 75% of the three billion tons of coal consumed annually in China today are used for thermal combustion. Coal’s share of global electricity generation is forecast to be approximately 41% by 2030. Major coal consumers include China, the United States and India.

#### Products

Fuel Tech’s NOx reduction technologies are installed worldwide on over 640 combustion units, including utility, industrial and municipal solid waste applications. Our products include customized NOx control systems and our patented ULTRATM technology, which converts urea-to-ammonia on site which provides safe reagent for use in Selective Catalytic Reduction (SCR) systems.

- Low NOx Burners and Ultra Low NOx Burners (LNB and ULNB) are available for coal-, oil-, and gas-fired industrial and utility units. Each system application is specifically designed to maximize NOx reduction. Computational fluid dynamics combustion modeling is used to validate the design prior to fabrication of equipment. NOx reductions can range from 40%-60% depending on the fuel type. Over-Fire Air (OFA) systems stage combustion for enhanced NOx reduction. Additional NOx reductions, beyond Low NOx Burners, of 35% - 50% are possible on different boiler configurations on a range of fuel types. Combined overall reductions range from 50% - 70%, with overall capital costs ranging from $10 - $20/kW and levelized total costs ranging from $300 - $1,500/ton of NOx removed, depending on the scope.
- Fuel Tech’s NOxOUT and HERT SNCR processes use non-hazardous urea as the reagent rather than ammonia. Both the NOxOUT and HERT processes on their own are capable of reducing NOx by up to 25% — 50% for utilities and by potentially significantly greater amounts for industrial units in many types of plants with capital costs ranging from $5 — $20/kW for utility boilers and with total annualized operating costs ranging from $1,000 — $2,000/ton of NOx removed.
- Fuel Tech’s Advanced Selective Catalytic Reduction (ASCR™) systems include LNB, OFA, and SNCR components, along with a downsized SCR catalyst, Ammonia Injection Grid (AIG), and Graduated Straightening Grid (GSG™) systems to provide up to 90% NOx reduction at significantly lower capital and operating costs than conventional SCR systems while providing greater operational flexibility to plant operators. The capital costs for ASCR systems can range from $30 — $150/kW depending on boiler size and configuration, which is significantly less than that of conventional SCRs, which can cost $300/kW or more, while operating costs are competitive with those experienced by SCR systems. The CASCADE™ and NOxOUT-SCR® processes are basic types of ASCR systems which use just SNCR and SCR catalyst components. The CASCADE systems can achieve 60% — 70% NOx reduction, with capital costs being a portion of the ASCR values defined above. Fuel Tech’s NOxOUT-SCR process utilizes urea as the SCR catalyst reagent to achieve NOx reductions of up to 85% from smaller stationary combustion sources with capital and operating costs competitive with equivalently sized, standard SCR systems.
- Fuel Tech’s ULTRA™ process is designed to convert urea to ammonia safely and economically for use as a reagent in the SCR process for NOx reduction. Recent local objections in the ammonia permitting process have raised concerns regarding the safety of ammonia shipment and storage in quantities sufficient to supply SCR. In addition, the Department of Homeland Security has characterized anhydrous ammonia as a Toxic Inhalation Hazard (TIH) commodity. This is contributing to new restrictions by rail carriers on the movement of anhydrous ammonia and to an escalation in associated rail transport and insurance rates. Overseas, new coal-fired power plants incorporating SCR systems are expected to be constructed at a rapid rate in China, and Fuel Tech’s ULTRA process is believed to be a market leader for the safe conversion of urea to ammonia just prior to injection into the flue gas duct, which is particularly important near densely populated cities, major waterways, harbors or islands, or where the transport of anhydrous or aqueous ammonia is a safety concern.
- Under an exclusive licensing agreement with FGC Corporation, Fuel Tech sells Flue Gas Conditioning systems incorporating FGC Corporation technology for utility applications in all geographies outside the United States and Canada. Flue Gas Conditioning systems improve the efficiency of particulate collectors, including electrostatic precipitators (ESPs) and fabric filters. These conditioning systems represent a far lower capital cost approach to improving ash particulate capture versus the alternative of installing larger ESPs or fabric filter technology to meet opacity levels.
- Fuel Tech’s SCR management group provides process design optimization, performance testing and improvement, and catalyst selection services for SCR systems on coal-fired boilers. In addition, other related services, including start-ups, maintenance support and general consulting services for SCR systems, Ammonia Injection Grid design and tuning to help optimize catalyst performance, and catalyst management services to help optimize catalyst life, are now offered to customers around the world. Fuel Tech also specializes in both physical experimental models, which involve construction of scale models through which fluids are tested, and computational fluid dynamics models, which simulate fluid flow by generating a virtual replication of real-world geometry and operating inputs. Fuel Tech designs flow corrective devices, such as turning vanes, ash screens, static mixers and our patent pending Graduated Straightening Grid GSG™. Fuel Tech’s models help clients optimize performance in flow critical equipment, such as selective catalytic reactors in SCR systems, where the effectiveness and longevity of catalysts are of utmost concern. The Company’s modeling capabilities are also applied to other power plant systems where proper flow distribution and mixing are important for performance, such as flue gas desulphurization scrubbers, electrostatic precipitators, air heaters, exhaust stacks and carbon injection systems for mercury removal.

Sales of the NOx reduction technologies were $40.9 million, $34.7 million, and $44.4 million for the years ended December 31, 2010, 2009 and 2008, respectively.

#### NOx Reduction Competition

Competition with Fuel Tech’s NOx reduction suite of products may be expected from companies supplying urea SNCR systems, combustion modification products, SCR systems and ammonia SNCR systems. In addition, Fuel Tech experiences competition in the urea-to-ammonia conversion market.

Combustion modifications, including Low NOx Burners and Over-Fire Air systems, can be fitted to most types of boilers with cost and effectiveness varying with specific boilers. Combustion modifications may yield up to 20% - 60% NOx reduction economically with capital costs ranging from $10 - $20/kW and levelized total costs ranging from $300 - $1,500/ton of NOx removed. The modifications are designed to reduce the formation of NOx and are typically the first NOx reduction efforts employed. Companies such as Alstom, Foster Wheeler Corporation, The Babcock & Wilcox Company, Combustion Components Associates, Inc., Siemens, and Babcock Power, Inc. are active competitors in the Low NOx Burner business. Once NOx is formed, then the SCR process is an effective and proven method of control for removal of NOx up to 90%. SCR systems have a high capital cost of $300+/kW on retrofit coal applications. Such companies as Alstom, The Babcock & Wilcox Company, Hitachi, Foster Wheeler Corporation, Peerless Manufacturing Company, and Babcock Power, Inc., are active SCR system providers, or providers of the catalyst itself.

The use of ammonia as the reagent for the SNCR process can reduce NOx by 30% — 70% on incinerators, but has limited applicability in the utility industry. Ammonia system capital costs range from $5 - $20/kW, with annualized operating costs ranging from $1,000 — $3,000/ton of NOx removed. These systems require the use of either anhydrous or aqueous ammonia, both of which are hazardous substances.

In addition to or in lieu of using the foregoing processes, certain customers may elect to close or de-rate plants, purchase electricity from third-party sources, switch from higher to lower NOx-emitting fuels or purchase NOx emission allowances.

Lastly, with respect to urea-to-ammonia conversion technologies, a competitive approach to Fuel Tech’s controlled urea decomposition system is available from Wahlco, Inc., which manufactures a system that hydrolyzes urea under high temperature and pressure.

### APC BACKLOG

Consolidated APC segment backlog at December 31, 2010 was $19.3 million versus backlog at December 31, 2009 of approximately $22.0 million. Substantially all of the backlog as of December 31, 2010 should be recognized as revenue in fiscal 2011, although the timing of such revenue recognition in 2011 is subject to the timing of the expenses incurred on existing projects.

### FUEL CHEM

#### Product and Markets

The FUEL CHEM® technology segment revolves around the unique application of specialty chemicals to improve the efficiency, reliability and environmental status of plants operating in the electric utility, industrial, pulp and paper, waste-to-energy, university and district heating markets. FUEL CHEM programs are currently in place on combustion units in North America, Europe, China, and India, treating a wide variety of solid and liquid fuels, including coal, heavy oil, biomass and municipal waste.

Central to the FUEL CHEM approach is the introduction of chemical reagents, such as magnesium hydroxide, to combustion units via in-body fuel application (pre-combustion) or via direct injection (post-combustion) utilizing Fuel Tech’s proprietary TIFI® technology. By attacking performance-hindering problems, such as slagging, fouling and corrosion, as well as the formation of sulfur trioxide (SO3), ammonium bisulfate (ABS), particulate matter (PM2.5), carbon dioxide (CO2), NOx and unburned carbon in fly ash, the Company’s programs offer numerous operational, financial and environmental benefits to owners of boilers, furnaces and other combustion units.

The key market dynamic for this product line is the continued use of coal as the principal fuel source for global electricity production. Coal accounts for approximately 50% of all U.S. electricity generation. Coal’s share of global electricity generation is forecast to be approximately 41% by 2030. Major coal consumers include the United States, China and India.

The principal markets for this product line are electric power plants burning coals with slag-forming constituents such as sodium, iron and high levels of sulfur. Sodium is typically found in the Powder River Basin (PRB) coals of Wyoming and Montana. Iron is typically found in coals produced in the Illinois Basin (IB) region. High sulfur content is typical of IB coals and certain Appalachian coals. High sulfur content can give rise to unacceptable levels of SO3 formation in plants with SCR systems and flue gas desulphurization units (scrubbers).

The combination of slagging coals and SO3-related issues, such as “blue plume” formation, air pre-heater fouling and corrosion, SCR fouling and the proclivity to suppress certain mercury removal processes, represents attractive market potential for Fuel Tech.

Internationally, market opportunities exist in Europe and in the Asia-Pacific region, particularly in China, where high-slagging coals are fueling a large and growing fleet of power plants. To address the Chinese market, where particular emphasis is being placed on energy efficiency, Fuel Tech had extended its exclusive teaming agreement with ITOCHU Hong Kong Ltd., a subsidiary of ITOCHU Corporation, through February 28, 2010. While the exclusivity portion of this agreement expired on this date, the relationship with Itochu continues under modified terms with emphasis on improving the strategy for addressing the Chinese FUEL CHEM market. Additionally, Fuel Tech has an alliance with a Chinese company to enhance its opportunities in the FUEL CHEM market. TIFI initiatives are aimed at energy efficiency improvements that result from maintaining better cleanliness on heat transfer equipment in particular at coal, oil, municipal solids waste, and biomass fired combustion facilities. FUEL CHEM benefits are characterized by generating more power and steam using the same fuel, capability of burning lower grade fuels, reduction of environmental toxic release, reduction of operation and maintenance cost, safe and more stable operations, as well as in reduced CO2 emissions, which potentially can be monetized under provisions of the Kyoto Protocol. Fuel Tech has two demonstrations currently in process, one on a 350 MW unit in northern China and a second on a district heating unit in northeast China where TIFI is being evaluated both on a stand-alone basis, and in conjunction with SNCR technology. Both demonstrations are to be completed in the first half of 2011.

A potentially large fuel treatment market exists in Mexico, where high-sulfur, low-grade fuel oil containing vanadium and nickel is a major source for electricity production. The presence of these metallic constituents promotes slag build-up, and the fuel properties can result in acid gas and particulate emissions in local combustion units. Fuel Tech has successfully treated such units with its TIFI technology. To capitalize on this market opportunity, the Company signed a ten-year license implementation agreement with Energy Marine Services, S.A. de C.V. (EMS), a private Mexican corporation, to implement our TIFI program for utility and industrial end user customers in Mexico. In 2009, our TIFI program was in continuous use on three boilers at CFE’s Punta Prieta power plant (110 MW generating capacity). In addition, EMS’s partner company was awarded a project to install TIFI equipment on three boilers at a different power plant (610 MW) also owned by CFE. Chemical consumption is expected to begin in the second quarter of 2011 on the first of these three units and in the third quarter of 2011 on the remaining two units. CFE is Mexico’s largest state power company with greater than 50 GW of installed capacity.

Sales of the FUEL CHEM products were $40.9 million, $36.7 million and $36.7 million for the years ended December 31, 2010, 2009 and 2008, respectively.

#### Competition

Competition for Fuel Tech’s FUEL CHEM product line includes chemicals sold by specialty chemical and combustion engineering companies, such as GE Infrastructure, Ashland Inc., and Environmental Energy Services, Inc. No substantive competition currently exists for Fuel Tech’s TIFI technology, which is designed primarily for slag control and SO3 abatement, but there can be no assurance that such lack of substantive competition will continue.

### INTELLECTUAL PROPERTY

The majority of Fuel Tech’s products are protected by U.S. and non-U.S. patents. Fuel Tech owns 75 granted patents worldwide and has 10 patent applications pending in the United States and 86 pending in non-U.S. jurisdictions. These patents and applications cover some 31 inventions, 18 associated with the NOx reduction business, eight associated with the FUEL CHEM business and five associated with non-commercialized technologies. Our patents have expiration dates ranging from January 11, 2011 to November 10, 2029. The average remaining duration of our patents is approximately seven years. Thirteen patents are due to expire in 2011 which cover three inventions. Two of these patents are US patents.

Fuel Tech believes that the protection provided by the numerous claims in the above referenced patents or patent applications is substantial, and affords Fuel Tech a significant competitive advantage in its business. Accordingly, any significant reduction in the protection afforded by these patents or any significant development in competing technologies could have a material adverse effect on Fuel Tech’s business.

### EMPLOYEES

At December 31, 2010, Fuel Tech had 161 employees, 136 in North America, 17 in China and 8 in Europe. Fuel Tech enjoys good relations with its employees and is not a party to any labor management agreement.

## Risk factors

As filed, 9,677 characters.

Investors in Fuel Tech should be mindful of the following risk factors relative to Fuel Tech’s business.

(i) Lack of Diversification

Fuel Tech has two broad technology segments that provide advanced engineering solutions to meet the pollution control, efficiency improvement, and operational optimization needs of energy-related facilities worldwide. They are as follows:

- The Air Pollution Control technology segment includes technologies to reduce NOx emissions in flue gas from boilers, incinerators, furnaces and other stationary combustion sources. These include Low and Ultra Low NOx Burners (LNB and ULNB), Over-Fire Air (OFA) systems, NOxOUT® and HERT™ Selective Non-Catalytic Reduction (SNCR) systems, and Advanced Selective Catalytic Reduction (ASCR™) systems. The ASCR system includes ULNB, OFA, and SNCR components, along with a downsized SCR catalyst, Ammonia Injection Grid (AIG), and Graduated Straightening Grid (GSG™) systems to provide high NOx reductions at significantly lower capital and operating costs than conventional SCR systems. The CASCADE™ and NOxOUT-SCR® processes are basic types of ASCR systems, using just SNCR and SCR catalyst components. ULTRA™ technology creates ammonia at a plant site using safe urea for use with any SCR application. Flue Gas Conditioning systems are chemical injection systems offered in markets outside the U.S. and Canada to enhance electrostatic precipitator and fabric filter performance in controlling particulate emissions.
- The FUEL CHEM® technology segment, which uses chemical processes in combination with advanced Computational Fluid Dynamics (CFD) and Chemical Kinetics Modeling (CKM) boiler modeling, for the control of slagging, fouling, corrosion, opacity and other sulfur trioxide-related issues in furnaces and boilers through the addition of chemicals into the furnace using TIFI® Targeted In-Furnace Injection™ technology.

An adverse development in Fuel Tech’s advanced engineering solution business as a result of competition, technological change, government regulation, or any other factor could have a significantly greater impact than if Fuel Tech maintained more diverse operations.

(ii) Competition

Competition in the Air Pollution Control market comes from competitors utilizing their own NOx reduction processes, including SNCR systems, Low NOx Burners, Over-Fire Air systems, flue gas recirculation, ammonia SNCR, SCR and, with respect to particular uses of urea not infringing Fuel Tech’s patents (see Item 1 “Intellectual Property”). Competition will also come from business practices such as the purchase rather than the generation of electricity, fuel switching, closure or de-rating of units, and sale or trade of pollution credits and emission allowances. Utilization by customers of such processes or business practices or combinations thereof may adversely affect Fuel Tech’s pricing and participation in the NOx control market if customers elect to comply with regulations by methods other than the purchase of Fuel Tech’s suite of Air Pollution Control products. See Item 1 “*Products”* and “*NOx Reduction Competition”* in the *Air Pollution Control* segment overview.

Competition in the FUEL CHEM markets includes chemicals sold by specialty chemical and combustion engineering companies, such as GE Infrastructure, Ashland Inc. and Environmental Energy Services, Inc. As noted previously, no significant competition currently exists for Fuel Tech’s patented TIFI technology, which is designed primarily for slag control and SO3 abatement. However, there can be no assurance that such lack of significant competition will continue.

(iii) Dependence on and Change in Air Pollution Control Regulations and Enforcement

Fuel Tech’s business is significantly impacted by and dependent upon the regulatory environment surrounding the electricity generation market. Our business will be adversely impacted to the extent that regulations are repealed or amended to significantly reduce the level of required NOx reduction, or to the extent that regulatory authorities delay or otherwise minimize enforcement of existing laws. Additionally, long-term changes in environmental regulation that threaten or preclude the use of coal or other fossil fuels as a primary fuel source for electricity production, based on the theory that gases emitted therefrom impact climate change through a greenhouse effect, and result in the reduction or closure of a significant number of fossil fuel-fired power plants, may adversely affect the Company’s business, financial condition and results of operations. See Item 1 above under the caption “*Regulations and Markets”* in the *Air Pollution Control* segment overview.

(iv) Protection of Patents and Proprietary Rights

Fuel Tech holds licenses to or owns a number of patents for our products and processes. In addition, we also have numerous patents pending. There can be no assurance that pending patent applications will be granted or that outstanding patents will not be challenged or circumvented by competitors. Certain critical technology relating to our products is protected by trade secret laws and by confidentiality and licensing agreements. There can be no assurance that such protection will prove adequate or that we will have adequate remedies against contractual counterparties for disclosure of our trade secrets or violations of Fuel Tech’s intellectual property rights. See Item 1 “Intellectual Property.”

(v) Foreign Operations

In 2007, we expanded our operations into China by establishing a wholly-owned subsidiary in Beijing. The Asia-Pacific region, particularly China, offers significant market opportunities for Fuel Tech as nations in this region look to establish regulatory policies for improving their environment and utilizing fossil fuels, especially coal, efficiently and effectively. The future business opportunities in these markets are dependent on the continued implementation of regulatory policies that will benefit our technologies, the acceptance of Fuel Tech’s engineering solutions in such markets, and the ability of potential customers to utilize Fuel Tech’s technologies on a cost-effective basis.

(vi) Product Pricing and Operating Results

The onset of significant competition for either of the technology segments might have an adverse impact on product pricing and a resulting adverse impact on realized gross margins and operating profitability.

(vii) Raw Material Supply and Pricing

The FUEL CHEM technology segment is dependent, in part, upon a supply of magnesium hydroxide. Any adverse change in the availability of this chemical will likely have an adverse impact on ongoing operation of our FUEL CHEM programs. On March 4, 2009, we entered into a Restated Product Supply Agreement (“PSA”) with Martin Marietta Magnesia Specialties, LLC (MMMS) in order to assure the continuance of a stable supply from MMMS of magnesium hydroxide products for our requirements in the United States and Canada until December 31, 2013, the date of the expiration of the PSA. Magnesium hydroxide products are a significant component of the FUEL CHEM programs. Pursuant to the PSA, MMMS supplies us with magnesium hydroxide products manufactured pursuant to our specifications and we have agreed to purchase from MMMS, and MMMS has agreed to supply, 100% of our requirements for such magnesium hydroxide products for our customers who purchase such products for delivery in the United States and Canada. There can be no assurance that Fuel Tech will be able to obtain a stable source of magnesium hydroxide in markets outside the United States.

(viii) Customer Access to Capital Funds

Uncertainty about current economic conditions in the United States and globally poses risk that Fuel Tech’s customers may postpone spending for capital improvement projects in response to tighter credit markets, negative financial news and/or decline in demand for electricity generated by combustion units, all of which could have a material negative effect on demand for the Fuel Tech’s products and services.

(ix) Customer Concentration

A small number of customers have historically accounted for a material portion of Fuel Tech’s revenues (see note 1 — *Organization and Significant Accounting Policies,* under the caption “*Risk Concentrations”*). There can be no assurance that Fuel Tech’s current customers will continue to place orders, that orders by existing customers will continue at the levels of previous periods, or that Fuel Tech will be able to obtain orders from new customers. The loss of one or more of our customers could have a material adverse effect on our sales and operating results.

(x) Domestic Credit Facility

Fuel Tech is party to a $25 million revolving credit agreement with JPMorgan Chase Bank, N.A. As of December 31, 2010, there were no outstanding borrowings on this facility and Fuel Tech was in compliance with all financial covenants contained in the agreement. Nevertheless, in the event of any default on the part of Fuel Tech under this agreement, the lender is entitled to accelerate payment of any amounts outstanding and may, under certain circumstances, cancel the facility. If the Company were unable to obtain a waiver for a breach of covenant and the lender accelerated the payment of any outstanding amounts, such acceleration may cause the Company’s cash position to significantly deteriorate or, if cash on hand were insufficient to satisfy the payment due, may require the Company to obtain alternate financing. See “Liquidity and Sources of Capital” under Item 7 “Management’s Discussion and Analysis of Financial Condition and Results of Operations.”

## Properties

As filed, 1,814 characters.

Fuel Tech owns an office building in Warrenville, Illinois, which has served as our corporate headquarters since June 23, 2008. This facility, with approximately 40,000 square feet of office space, was purchased for approximately $6,000,000 and subsequently built out and furnished for an additional cost of approximately $5,500,000. This facility will meet our growth requirements for the foreseeable future.

Fuel Tech and its subsidiaries also operate from leased office facilities in Stamford, Connecticut; Durham, North Carolina; Gallarate, Italy and Beijing, China. Fuel Tech does not segregate any of its leased facilities by operating business segment. The terms of the Company’s four material lease arrangements are as follows:

- The Stamford, Connecticut building lease term, for approximately 6,440 square feet, runs from February 1, 2010 to December 31, 2019. The facility houses certain administrative functions such as Investor Relations and certain APC sales functions. This lease replaces the prior facility lease for a separate location in Stamford which expired on January 31, 2010.
- The Beijing, China building lease term, for approximately 5,800 square feet, runs from September 1, 2010 to August 31, 2011. This facility serves as the operating headquarters for our Beijing Fuel Tech operation. Fuel Tech has the option to extend the lease term at a market rate to be agreed upon between Fuel Tech and the lessor.
- The Durham, North Carolina building lease term, for approximately 16,000 square feet, runs from November 1, 2005 to April 30, 2014. Fuel Tech has no option to extend the lease.
- The Gallarate, Italy building lease term, for approximately 1,300 square feet, runs from July 1, 2005 to April 30, 2013. This facility serves as the operating headquarters for our Italy operations.

## Legal proceedings

As filed, 267 characters.

We are from time to time involved in litigation incidental to our business. We are not currently involved in any litigation in which we believe an adverse outcome would have a material effect on our business, financial conditions, results of operations, or prospects.

## Management's discussion and analysis

As filed, 43,338 characters.

### Background

Fuel Tech, Inc. (“Fuel Tech”) has two broad technology segments that provide advanced engineered solutions to meet the pollution control, efficiency improvement and operational optimization needs of energy-related facilities worldwide. They are as follows:

#### Air Pollution Control Technologies

The Air Pollution Control technology segment includes technologies to reduce NOx emissions in flue gas from boilers, incinerators, furnaces and other stationary combustion sources. These include Low and Ultra Low NOx Burners (LNB and ULNB), Over-Fire Air (OFA) systems, NOxOUT® and HERT™ Selective Non-Catalytic Reduction (SNCR) systems, and Advanced Selective Catalytic Reduction (ASCR™) systems. The ASCR system includes ULNB, OFA, and SNCR components, along with a downsized SCR catalyst, Ammonia Injection Grid (AIG), and Graduated Straightening Grid (GSG™) systems to provide high NOx reductions at significantly lower capital and operating costs than conventional SCR systems. The CASCADETM and NOxOUT-SCR® processes are basic types of ASCR systems, using just SNCR and SCR catalyst components. ULTRA™ technology creates ammonia at a plant site using safe urea for use with any SCR application. Flue Gas Conditioning systems are chemical injection systems offered in markets outside the U.S. and Canada to enhance electrostatic precipitator and fabric filter performance in controlling particulate emissions. Fuel Tech distributes its products through its direct sales force and agents.

#### FUEL CHEM Technologies

The FUEL CHEM® technology segment, which uses chemical processes in combination with advanced CFD and CKM boiler modeling, for the control of slagging, fouling, corrosion, opacity and other sulfur trioxide-related issues in furnaces and boilers through the addition of chemicals into the furnace using TIFI® Targeted In-Furnace Injection™ technology. Fuel Tech sells its FUEL CHEM program through its direct sales force and agents to industrial and utility power-generation facilities. FUEL CHEM programs are installed on combustion units in North America, Europe, China, and India, treating a wide variety of solid and liquid fuels, including coal, heavy oil, biomass and municipal waste. The FUEL CHEM program improves the efficiency, reliability and environmental status of plants operating in the electric utility, industrial, pulp and paper, waste-to-energy, university and district heating markets and offers numerous operational, financial and environmental benefits to owners of boilers, furnaces and other combustion units.

The key market dynamic for both technology segments is the continued use of fossil fuels, especially coal, as the principal fuel source for global electricity production. Coal accounts for approximately 50% of all U.S. electricity generation. Coal’s share of global electricity generation is forecast to be approximately 41% by 2030. Major coal consumers include China, the United States and India.

### Critical Accounting Policies and Estimates

The consolidated financial statements are prepared in accordance with accounting principles generally accepted in the United States of America, which require us to make estimates and assumptions. We believe that of our accounting policies (see Note 1 to the consolidated financial statements), the following involve a higher degree of judgment and complexity and are deemed critical. We routinely discuss our critical accounting policies with the Company’s Audit Committee.

#### Revenue Recognition

Revenues from the sales of chemical products are recorded when title transfers, either at the point of shipment or at the point of destination, depending on the contract with the customer.

Fuel Tech uses the percentage of completion method of accounting for equipment construction and license contracts that are sold within the Air Pollution Control technology segment. Under the percentage of completion method, revenues are recognized as work is performed based on the relationship between actual construction costs incurred and total estimated costs at completion. Construction costs include all direct costs such as materials, labor, and subcontracting costs, and indirect costs allocable to the particular contract such as indirect labor, tools and equipment, supplies, and depreciation. Revisions in completion estimates and contract values are made in the period in which the facts giving rise to the revisions become known and can influence the timing of when revenues are recognized under the percentage of completion method of accounting. Such revisions have historically not had a material effect on the amount of revenue recognized. Provisions are made for estimated losses on uncompleted contracts in the period in which such losses are determined. As of December 31, 2010, Fuel Tech had no construction contracts in progress that were identified as loss contracts. As of December 31, 2009, Fuel Tech had one construction contract in progress that was identified as a loss contract in the amount of $166.

Fuel Tech’s APC contracts are typically eight to sixteen months in length. A typical contract will have three or four critical operational measurements that, when achieved, serve as the basis for us to invoice the customer via progress billings. At a minimum, these measurements will include the generation of engineering drawings, the shipment of equipment and the completion of a system performance test.

As part of most of its contractual APC project agreements, Fuel Tech will agree to customer-specific acceptance criteria that relate to the operational performance of the system that is being sold. These criteria are determined based on mathematical modeling that is performed by Fuel Tech personnel, which is based on operational inputs that are provided by the customer. The customer will warrant that these operational inputs are accurate as they are specified in the binding contractual agreement. Further, the customer is solely responsible for the accuracy of the operating condition information; all performance guarantees and equipment warranties granted by us are void if the operating condition information is inaccurate or is not met.

Accounts receivable includes unbilled receivables, representing revenues recognized in excess of billings on uncompleted contracts under the percentage of completion method of accounting. At December 31, 2010 and December 31, 2009, unbilled receivables were approximately $6,800 and $7,814, respectively, and are included in accounts receivable on the consolidated balance sheet. Billings in excess of costs and estimated earnings on uncompleted contracts were $650 and $316 at December 31, 2010 and December 31, 2009, respectively, and are included in other accrued liabilities on the consolidated balance sheet.

Fuel Tech has installed over 640 units with APC technology and normally provides performance guarantees to our customers based on the operating conditions for the project. As part of the project implementation process, we perform system start-up and optimization services that effectively serve as a test of actual project performance. We believe that this test, combined with the accuracy of the modeling that is performed, enables revenue to be recognized prior to the receipt of formal customer acceptance.

#### Allowance for Doubtful Accounts

The allowance for doubtful accounts is the Company’s best estimate of the amount of credit losses in accounts receivable. In order to control and monitor the credit risk associated with our customer base, we review the credit worthiness of customers on a recurring basis. Factors influencing the level of scrutiny include the level of business the customer has with Fuel Tech, the customer’s payment history and the customer’s financial stability. Receivables are considered past due if payment is not received by the date agreed upon with the customer, which is normally 30 days. Representatives of our management team review all past due accounts on a weekly basis to assess collectability. At the end of each reporting period, the allowance for doubtful accounts balance is reviewed relative to management’s collectability assessment and is adjusted if deemed necessary through a corresponding charge or credit to bad debts expense, which is included in selling, general, and administrative expenses in the consolidated statements of operations. Bad debt write-offs are made when management believes it is probable a receivable will not be recovered. Our historical credit loss has been insignificant.

#### Assessment of Potential Impairments of Goodwill and Intangible Assets

Goodwill and indefinite-lived intangible assets are no longer amortized, but rather are reviewed annually (in the fourth quarter) or more frequently if indicators arise, for impairment. The Company does not have any indefinite-lived intangible assets other than goodwill. Such indicators include a decline in expected cash flows, a significant adverse change in legal factors or in the business climate, unanticipated competition, a decrease in our market capitalization to an amount less than the carrying value of our assets, or slower growth rates, among others.

Goodwill is allocated among and evaluated for impairment at the reporting unit level, which is defined as an operating segment or one level below an operating segment. Fuel Tech has two reporting units which are reported in the FUEL CHEM segment and the APC technology segment. As of December 31, 2010 and 2009, goodwill allocated to the FUEL CHEM technology segment was $1,723 and goodwill allocated to the APC technology segment was $19,328.

The evaluation of impairment involves comparing the current fair value of a reporting unit to its carrying value. Fuel Tech uses a discounted cash flow (DCF) model to determine the current fair value of its two reporting units as this methodology was deemed to best quantify the present values of the Company’s expected future cash flows and yield a fair value that should be in line with the aggregate market value placed on the Company via the current stock price multiplied by the outstanding common shares. A number of significant assumptions and estimates are involved in the application of the DCF model to forecast operating cash flows, including markets and market share, sales volumes and prices, costs to produce and working capital changes. Events outside the Company’s control, specifically market conditions that impact revenue growth assumptions, could significantly impact the fair value calculated. Management considers historical experience and all available information at the time the fair values of its reporting units are estimated. However, actual fair values that could be realized in an actual transaction may differ from those used to evaluate the impairment of goodwill.

The application of our DCF model in estimating the fair value of each reporting segment is based on the ‘income’ approach to business valuation. In using this approach for each reportable segment, we forecast segment revenues and expenses out to perpetuity and then discount the resulting cash flows to their present value using an appropriate discount rate. The forecast considers, among other items, the current and expected business environment, expected changes in the fixed and variable cost structure as the business grows, and a revenue growth rate that we feel is both achievable and sustainable. The discount rate used is composed of a number of identifiable risk factors, including equity risk, company size, and certain company specific risk factors such as our debt-to-equity ratio, among other factors, that when added together, results in a total return that a prudent investor would demand for an investment in our company.

In the event the estimated fair value of a reporting unit per the DCF model is less than the carrying value, additional analysis would be required. The additional analysis would compare the carrying amount of the reporting unit’s goodwill with the implied fair value of that goodwill, which may involve the use of valuation experts. The implied fair value of goodwill is the excess of the fair value of the reporting unit over the fair values assigned to all of the assets and liabilities of that unit as if the reporting unit was acquired in a business combination and the fair value of the reporting unit represented the purchase price. If the carrying value of goodwill exceeds its implied fair value, an impairment loss equal to such excess would be recognized, which could significantly and adversely impact reported results of operations and stockholders’ equity.

Based upon the nature of the goodwill recorded on the balance sheets as of December 31, 2010 and 2009, the Company believes that, in order for an impairment to occur, our actual revenue growth in future periods would need to differ materially from the projected revenue growth estimates included in our current cash flow forecasts, particularly as it relates to the APC reporting unit. In addition, other economic events may be indicators of impairment, such as suppressed consolidated revenues, a reduction in our market capitalization to an amount that is lower than our current enterprise value, reduced overall cash flows, or declining APC order backlog. Management does not believe that any of these events, including the recent negative economic events related to the global economic downturn, have resulted in any indications of asset impairment as it pertains to the Fuel Tech’s business.

#### Impairment of Long-Lived Assets and Amortizable Intangible Assets

Long-lived assets, including property, plant and equipment (PP&E) and intangible assets, are reviewed for impairment when events and circumstances indicate that the carrying amount of the assets (or asset groups) may not be recoverable. If impairment indicators exists, we perform a more detailed analysis and an impairment loss is recognized when estimated future undiscounted cash flows expected to result from the use of the asset (or asset group) and its eventual disposition are less than the carrying amount. This process of analyzing impairment involves examining the operating condition of individual assets (or asset groups) and estimating a fair value based upon current condition, relevant market factors and remaining estimated operational life compared to the asset’s remaining depreciable life. Quoted market prices and other valuation techniques are used to determine expected cash flows. However, due to the nature of our PP&E, which is comprised mainly of assets related to our headquarters building and equipment deployed at customer locations for our FUEL CHEM programs, and the shorter-term duration over which FUEL CHEM equipment is depreciated, the likelihood of impairment is mitigated. The discontinuation of a FUEL CHEM program at a customer site would most likely result in the re-deployment of all or most of the effected assets to another customer location rather than an impairment.

#### Valuation Allowance for Deferred Income Taxes

Deferred tax assets represent deductible temporary differences and net operating loss and tax credit carryforwards. A valuation allowance is recognized if it is more likely than not that some portion of the deferred tax asset will not be realized. At the end of each reporting period, Fuel Tech reviews the realizability of the deferred tax assets. As part of this review, we consider if there are taxable temporary differences that could generate taxable income in the future, if there is the ability to carry back the net operating losses or credits, if there is a projection of future taxable income, and if there are any tax planning strategies that can be readily implemented.

#### Stock-Based Compensation

Fuel Tech recognizes compensation expense for employee equity awards ratably over the requisite service period of the award. We utilize the Black-Scholes option-pricing model to estimate the fair value of stock option awards. Determining the fair value of stock options using the Black-Scholes model requires judgment, including estimates for (1) risk-free interest rate — an estimate based on the yield of zero—coupon treasury securities with a maturity equal to the expected life of the option; (2) expected volatility — an estimate based on the historical volatility of Fuel Tech’s Common Stock for a period equal to the expected life of the option; and (3) expected life of the option — an estimate based on historical experience including the effect of employee terminations. If any of these assumptions differ significantly from actual, stock-based compensation expense could be impacted.

#### Recently Adopted Accounting Standards

In February 2010, the Financial Accounting Standards Board (FASB) issued amended guidance on subsequent events. Under this amended guidance, SEC filers are no longer required to disclose the date through which subsequent events have been evaluated in originally issued and revised financial statements. This guidance was effective immediately and we adopted these new requirements for the quarter ended March 31, 2010.

In January 2010, the FASB issued authoritative guidance that expands the required disclosures about fair value measurements. This guidance provides for new disclosures would require the Company to (i) disclose separately the amounts of significant transfers in and out of Level 1 and Level 2 fair value measurements and describe the reasons for the transfers and (ii) present separately information about purchases, sales, issuances and settlements in the reconciliation of Level 3 fair value measurements. This guidance also provides clarification of existing disclosures requiring the Company to (i) determine each class of assets and liabilities based on the nature and risks of the investments rather than by major security type and (ii) for each class of assets and liabilities, disclose the valuation techniques and inputs used to measure fair value for both Level 2 and Level 3 fair value measurements. This guidance became effective for Fuel Tech on January 1, 2010, except for the presentation of purchases, sales, issuances and settlements in the reconciliation of Level 3 fair value measurements, which is effective for Fuel Tech on January 1, 2011, and did not have an impact on the Company’s consolidated financial statements because we have no material financial instruments that are measured at fair value on a recurring basis. The guidance pertaining to the presentation of purchases, sales, issuances and settlements in the reconciliation of Level 3 fair value measurements is not expected to have a material impact on the Company’s consolidated financial statements.

In April 2010, the FASB issued guidance titled “Compensation—Stock Compensation (Topic 718): Effect of Denominating the Exercise Price of a Share-Based Payment Award in the Currency of the Market in Which the Underlying Equity Security Trades”. This guidance provides amendments to Topic 718 to clarify that an employee share-based payment award with an exercise price denominated in currency of a market in which a substantial portion of the entity’s equity securities trades should not be considered to contain a condition that is not a market, performance, or service condition. Therefore, an entity would not classify such an award as a liability if it otherwise qualifies as equity. The amendments in this ASU are effective for fiscal years, and interim periods within those fiscal years, beginning on or after December 15, 2010. The Company does not expect the adoption of this guidance to have an impact on its financial statements.

### 2010 versus 2009

Revenues for the years ended December 31, 2010 and 2009 were $81,795 and $71,397, respectively. The year-over-year increase of $10,398, or 15%, was driven by increased revenue in both the APC technology and FUEL CHEM segments. International revenues for the years ended December 31, 2010 and 2009 were $12,793 and $16,002, respectively.

Revenues for the APC technology segment were $40,917 for the year ended December 31, 2010, an increase of $6,196, or 18%, versus fiscal 2009. This increase is predominantly attributed to higher activity on capital projects as evidenced by a strong backlog balance at both the beginning and end of 2010. Backlog for the years ended December 31, 2010 and 2009 was $19.3 and $22.0 respectively.

Revenues for the FUEL CHEM technology segment for the year ended December 31, 2010 were $40,878, an increase of $4,202, or 11% versus fiscal 2009. Contributing to this year over year increase was a $2 million contingent risk share payment received in 2010 relating to a successful demonstration in the second half of 2009 (see discussion below). During 2010, Fuel Tech added 7 new coal-fired units to its customer base. Revenue from coal-fired units increased by $4,854 or 15%.

During a FUEL CHEM demonstration period, the Company will typically absorb all of the direct costs (e.g., chemicals, on-site personnel, equipment depreciation and demonstration-related travel expenses) and indirect costs of operating the demonstration and will offset these costs with partial billings to the customer. While each demonstration is unique, a typical demonstration will operate for 90 days and the Company will accumulate future billing amounts that will usually be invoiced to the customer only if the FUEL CHEM program converts to commercial status. These amounts may range from less than $100 to over $1,000 depending on the quantity of chemical fed, the agreed-upon cost sharing arrangement and the length of the demonstration program.

During the demonstration period, the aggregate cost of all FUEL CHEM demonstration programs will have a dilutive effect on the segment gross margin percentage as the related revenues earned will approximate the costs incurred and result in nominal gross margin dollars being recorded. In certain situations, the Company agrees to fully fund a demonstration program due to the strategic importance of its success and conversion to commercial status. In these cases, the specific program’s recognized revenues will be zero and the gross margin dollar contribution will be negative by the amount of the program’s cost, thus even further diluting the segment’s gross margin percentage.

Cost of sales for the year ended December 31, 2010 and 2009 was $46,821 and $42,444, respectively. Cost of sales as a percentage of revenues for the years ended December 31, 2010 and 2009 was 57% and 59%, respectively. Cost of sales as a percentage of revenue for the APC technology segment increased to 66% in 2010 from 62% in 2009. The increase is attributed to the mix of lower margin project business, including one large contract with a significant amount of lower margin installation work at a nominal mark-up percentage. Cost of sales as a percentage of revenue for the FUEL CHEM technology segment decreased to 48% in 2010 from 57% in 2009 primarily due to the risk share payment of $2 million received during 2010.

Selling, general and administrative expenses for the years ended December 31, 2010 and 2009 were $30,089 and $31,492, respectively. The decrease of $1,403, or 4%, is attributed to the following:

- Personnel and other expenses related to the reduction and restructuring of the workforce decreased $1,012 for fiscal 2010.
- Stock compensation expense decreased $1,782 due to the full vesting of options with a comparative higher value than recent grants.

16

- Fees paid to outside service providers decreased $501 as a result of strategic hiring and cost containment measures.
- Depreciation decreased year over year $243 as a result of an accelerated leasehold improvement that was terminated in January 2010.
- Partially offsetting these amounts was an increase of $1,389 relating to the implementation of new incentive programs for domestic and international employees, and
- Internal and external commissions increased $740 as a result of increased revenue from both of the product segments.

Research and development (“R&D”) expenses were $948 and $542 for the years ended December 31, 2010 and 2009, respectively. The increase in R&D expenditures is aligned with the Company’s philosophy of investing in new product design and innovation for our product lines. Fuel Tech has maintained its focused approach in the pursuit of commercial applications for its technologies outside of its traditional markets, and in the development and analysis of new technologies that could represent incremental market opportunities domestically and abroad.

Interest income for the year ended December 31, 2010 decreased by $21 to $11 versus 2009 predominantly due to a decrease in the average return on the Company’s interest-bearing accounts in which the cash is invested. Interest expense of $143 was recorded in 2010 on the debt incurred to start-up activities at Fuel Tech’s office in Beijing, China, compared to $120 in the prior year. The increase is primarily related to differences in foreign exchange rates and not changes in the principal balance of the debt outstanding or changes in interest rates. Finally, the modest change in other income/(expense) is due to the impact of foreign exchange rates as it relates to balances denominated in foreign currencies that are translated into U.S. dollars for reporting purposes.

For the year ended December 31, 2010, Fuel Tech recorded income tax expense of $1,933 on the Company’s pre-tax income of $3,686. Our effective tax rate of 52.4% was higher that our expected rate of approximately 46% due primarily to higher than expected losses in our Italian subsidiary for which we were not able to record a tax benefit as a result of the valuation allowance placed on that entity’s net operating losses. For the year end December 31, 2009, Fuel Tech recorded an income tax benefit of $1,104 on the Company’s pre-tax loss of ($3,410).

### 2009 versus 2008

Revenues for the years ended December 31, 2009 and 2008 were $71,397 and $81,074, respectively. The year-over-year decrease of $9,677, or 12%, was driven by reduced orders in the APC technology segment.

Revenues for the APC technology segment were $34,721 for the year ended December 31, 2009, a decrease of $9,672, or 22%, versus fiscal 2008. The global financial crisis coupled with domestic regulatory uncertainty regarding the eventual timing of the implementation of the Clean Air Interstate Rule (CAIR) contributed to an across-the-board slowdown of capital project orders for pollution control equipment from our customer base which had a negative effect on segment revenues and the APC order backlog. While revenues are down from the prior year, this segment remains uniquely positioned to capitalize on the next phase of increasingly stringent U.S. and Chinese air quality standards, specifically on NOx control. Interest in Fuel Tech’s suite of pollution control technologies, on both a new and retrofit basis, remains strong, both domestically and abroad, and 2009 quotation and order activity was substantially in excess of that experienced in 2008. During 2009, Fuel Tech announced new APC contracts valued at approximately $37,800.

Revenues for the FUEL CHEM technology segment for the year ended December 31, 2009 were $36,676, substantially on par with the record revenues reported for the year ended December 31, 2008 of $36,681. This segment’s ability to generate revenues comparable to prior year levels demonstrates the continued market acceptance of Fuel Tech’s patented TIFI Targeted In-Furnace Injection technology, particularly on coal-fired units, which represent the largest market opportunity for the technology.

During 2009, Fuel Tech added 10 new units to its customer base, four of which were coal-fired units. The addition of these customer units, which historically average approximately $1,000 in annual revenues once converted to commercial status, and increased project demonstration activity helped mitigate the decrease in demand for electricity, largely related to the economic recession, that has dictated that certain Fuel Tech customers shut down or scale back some boiler operations. This, in turn, has resulted in some FUEL CHEM programs being operated at reduced levels or, in some cases, being temporarily turned off. Historically, most demonstrations convert into commercial accounts.

Cost of sales for the year ended December 31, 2009 and 2008 was $42,444 and $44,345, respectively. Cost of sales as a percentage of revenues for the years ended December 31, 2009 and 2008 was 59% and 54%, respectively. Cost of sales as a percentage of revenue for the APC technology segment increased to 62% in 2009 from 55% in 2008. The increase is attributed to the mix of lower margin project business, including one large contract with a significant amount of lower margin installation work and the pass through of approximately $2.2 million in catalyst sales at a nominal mark-up percentage. Cost of sales as a percentage of revenue for the FUEL CHEM technology segment increased to 57% in 2009 from 55% in 2008 primarily due to increased chemical manufacturing costs.

Selling, general and administrative expenses for the years ended December 31, 2009 and 2008 were $31,492 and $28,402, respectively. The increase of $3,090, or 11%, is attributed to the following:

- Personnel and other expenses related to the acquisitions of substantially all of the assets of Tackticks LLC, FlowTack LLC, and ACT contributed additional incremental expenses of $2,292 for fiscal 2009.
- The implementation of a new sales commission program for both the APC and FUEL CHEM technology segments resulted in an increase of $793 in commission expense.
- The Company also incurred year-over-year increases in depreciation expense of $395 driven by the acceleration of leasehold improvement amortization expense related to the termination of the current Stamford office lease, legal fees of $250 due to international contracts and acquisition-related activities, and accounting and auditing fees of $109 primarily related to acquisition-related activities.
- Partially offsetting these amounts was a $781 gain from the revaluation of the contingent liability related to the ACT acquisition.

Research and development expenses were $542 and $2,100 for the years ended December 31, 2009 and 2008, respectively. The decline in expenditures is due to the Company moderating its near-term R&D expenditures in the wake of the global financial crisis. However, Fuel Tech maintained its focused approach in the pursuit of commercial applications for its technologies outside of its traditional markets, and in the development and analysis of new technologies that could represent incremental market opportunities domestically and abroad.

Interest income for the year ended December 31, 2009 decreased by $709 to $32 versus 2008 predominantly due to reductions in cash balances on hand as a result of the cash outlay for the acquisitions of substantially all of the assets of Tackticks, LLC and FlowTack, LLC, and ACT coupled with a decrease in the average return in the Company’s interest-bearing accounts in which the cash is invested. Interest expense of $120 was recorded in 2009 primarily due to the debt incurred to start-up activities at Fuel Tech’s office in Beijing, China. Finally, the modest change in other income / (expense) is due to the impact of foreign exchange rates as it relates to balances denominated in foreign currencies and is translation, not transaction, in nature.

For the year end December 31, 2009, Fuel Tech recorded an income tax benefit of $1,104 on the Company’s pre-tax loss of ($3,410). For the year ended December 31, 2008, Fuel Tech recorded income tax expense of $3,247 on pre-tax income of $6,607.

### Liquidity and Sources of Capital

At December 31, 2010, Fuel Tech had cash and cash equivalents of $30,524 and working capital of $36,645 versus cash and cash equivalents of $20,965 and working capital of $30,578 at December 31, 2009. Operating activities provided $12,190 of cash for the year ended December 31, 2010, primarily due to the add back of non-cash items from our net income of $1,753 including stock compensation expense of $4,179 and depreciation and amortization of $4,081, as well as an increase in accounts payable, accrued expenses, and other non-current liabilities of $7,144 due to the timing of vendor invoices and related payments. Partially offsetting these items were subtractions of non-cash items from our net income including a gain from the revaluation of the earn-out related to our acquisition of Advanced Combustion Technology of $768 and the effect of changes in our deferred income tax provision of $588, as well as an increase in accounts receivable of $3,365 due to the timing of customer receipts and progress billings on projects and an increase in spare parts inventory of $354.

Operating activities provided $13,527 of cash for the year ended December 31, 2009, primarily due to a decrease in accounts receivable of $5,488 due to the timing of customer receipts, and the add back of non-cash items including stock compensation expense of $6,011, depreciation expense of $3,796 and amortization expense of $1,312 and a decrease in prepaid expenses of $3,293. Partially offsetting these items were a net loss of $2,306, a decrease in accounts payable of $2,372 due to the timing of vendor invoices and related payments, and a decrease in the deferred income tax provision of $1,492.

Investing activities used cash of $2,006 for the year ended December 31, 2010 related to purchases of equipment and patents of $2,206 primarily to support and enhance the operations of the FUEL CHEM technology segment offset by a decrease in the restricted cash balance of $200 described below. Investing activities used cash of $22,389 for the year ended December 31, 2009. This amount was comprised of three items: the acquisition of substantially all of the assets of ACT required a total funding of $20,185; capital expenditures of $2,004, primarily to support and enhance the operations of the FUEL CHEM technology segment; and an increase in restricted cash of $200 to support the transfer of pre-existing stand-by letters of credit and bank guaranties from Wachovia to JPM Chase.

The Company used cash from financing activities for the year ended December 31, 2010 of $732, primarily to do to repayments of $737 for the debt obligation that has been used to support the growth of the Beijing office. The Company generated cash from financing activities for the year ended December 31, 2009 of $1,596, primarily from proceeds received from the exercise of stock options of $605 and from additional borrowings of $737 to support the growth of the Beijing office.

On June 30, 2009, Fuel Tech entered into a $25,000 revolving credit facility (the “Facility”) with JPMorgan Chase Bank, N.A (JPM Chase). The Facility has a term of two years through June 30, 2011, is unsecured, bears interest at a rate of LIBOR plus a spread range of 250 basis points to 375 basis points, as determined under a formula related to the Company’s leverage ratio, and has the Company’s Italian subsidiary, Fuel Tech S.r.l., as a guarantor. Fuel Tech can use this Facility for cash advances and standby letters of credit. As of December 31, 2010 and 2009, there were no outstanding borrowings on this Facility.

At its inception, the Facility contained several debt covenants with which the Company must comply on a quarterly or annual basis, including an annual capital expenditure limit of $10,000, a minimum tangible net worth of $42,000, adjusted upward for 50% of net income generated and 100% of all capital issuances, a minimum net income for the quarterly period ended June 30, 2009 of ($2,000), and minimum net income for the quarterly period ended September 30, 2009 of $750. There was not a minimum net income requirement for any periods subsequent to September 30, 2009. In addition, the original Facility covenants included a maximum Funded Debt to EBITDA Ratio (or “Leverage Ratio”, as defined in the Facility) of 2.0:1.0 for the four consecutive quarterly periods ended December 31, 2009 and a maximum Leverage Ratio of 1.5:1.0 for the four consecutive quarterly periods ending March 31, 2010 and all succeeding four consecutive quarterly periods until the facility expires. Maximum funded debt is defined as all borrowed funds, outstanding standby letters of credit and bank guarantees. EBITDA includes after tax earnings with add backs for interest expense, income taxes, and depreciation and amortization expenses. Due to the Company’s quarterly net loss of ($698) for the three-month period ended September 30, 2009, however, the Company was in breach of its minimum quarterly net income covenant that was in effect at that time. The Company amended the Facility to obtain a waiver of this covenant breach from JPM Chase for the quarterly period ended September 30, 2009 and revised certain financial covenants as follows: for the three-month period ended December 31, 2009 the Company shall achieve a Minimum Net Income of ($2,000), for the three-month period ended March 31, 2010 the Company’s Leverage Ratio shall not exceed 2.75:1.0, and for the three month period ended June 30, 2010 and each subsequent quarterly period, the Leverage Ratio shall not exceed 1.5:1.0. The purchase price for allowable acquisitions made during any fiscal year was also lowered to $5,000 in the aggregate if Leverage Ratio is greater than 2.75:1.0. The Company’s spread matrix for rates and fees paid on its revolving credit facility and standby letters of credit was adjusted upward to include additional tiers tied to the quarterly calculated Leverage Ratio. No other Facility covenants were modified for any other period.

At December 31, 2010, the Company was in compliance with all financial covenants on the Facility, including a year-to-date capital expenditure amount of $2,206, a tangible net worth amount of $56,855, which was above the required amount of $52,574 by $4,281, and a Leverage Ratio of 0.45:1.0, which was well below the maximum requirement of 1.5:1.0.

Beijing Fuel Tech Environmental Technologies Company, Ltd. (Beijing Fuel Tech), a wholly-owned subsidiary of Fuel Tech, has a revolving credit facility (the “China Facility”) agreement with JPM Chase for RMB 45 million (approximately $6,600), which expires on June 30, 2011. The facility is unsecured, bears interest at a rate of 120% of the People’s Bank of China (PBOC) Base Rate (approximately 5.8% at December 31, 2010 and 2009) and does not contain any material debt covenants. Beijing Fuel Tech can use this facility for cash advances and bank guarantees. As of December 31, 2010 and 2009, Beijing Fuel Tech has borrowings outstanding in the amount $2,269 and $2,925, respectively.

At December 31, 2010 and 2009, the Company had outstanding standby letters of credit and bank guarantees, predominantly to customers, totaling approximately $1,265 and $5,823, respectively, in connection with contracts in process. Fuel Tech is committed to reimbursing the issuing bank for any payments made by the bank under these instruments. At December 31, 2010 and 2009, there were no cash borrowings under the revolving credit facility and approximately $23,735 and $19,177, respectively, was available. Management has met with the Company’s lending institutions and, during the course of those meetings, was not made aware of any information indicating that they will not be able to perform their obligations for any letters of credit or guarantees issued, nor be unable to supply funds to Fuel Tech if the Company chooses to borrow funds under its two revolving credit facilities.

In the event of default on either the JPM Chase domestic facility or the JPM Chase China facility, the cross default feature in each allows the lending bank to accelerate the payments of any amounts outstanding and may, under certain circumstances, allow the bank to cancel the facility. If the Company were unable to obtain a waiver for a breach of covenant and the bank accelerated the payment of any outstanding amounts, such acceleration may cause the Company’s cash position to deteriorate or, if cash on hand were insufficient to satisfy the payment due, may require the Company to obtain alternate financing to satisfy the accelerated payment.

Interest payments in the amount of $143, $120, and $135 were made during the years ended December 31, 2010, 2009 and 2008, respectively.

In the opinion of management, Fuel Tech’s expected near-term revenue growth will be driven by the timing of penetration of the coal-fired utility marketplace via utilization of its TIFI technology, by utility and industrial entities’ adherence to the NOx reduction requirements of the various domestic environmental regulations, and by the expansion of both business segments in non-U.S. geographies. Fuel Tech expects its liquidity requirements to be met by the operating results generated from these activities.

### Contractual Obligations and Commitments

In its normal course of business, Fuel Tech enters into agreements that obligate Fuel Tech to make future payments. The contractual cash obligations noted below are primarily related to supporting the ongoing operations of the business.

*Payments due by period in thousands of dollars*

| Contractual Cash Obligations | Total | 2011 | 2012-2013 | 2014-2015 | Thereafter |
| --- | ---: | ---: | ---: | ---: | ---: |
| Short-term debt obligations | $2,269 | $2,269 | $— | $— | $— |
| Estimated interest payments on debt obligations\* | 68 | 68 | — | — | — |
| Operating lease obligations | 3,422 | 629 | 1,016 | 617 | 1,160 |
| Total | $5,759 | $2,966 | $1,016 | $617 | $1,160 |

\* Debt obligations consist solely of borrowings under the Company’s Chinese revolving credit facility which bears interest at a rate of 120% of the People’s Bank of China (PBOC) Base Rate, or 5.8%, at December 31, 2010.

Interest payments in the amount of $143, $120, and $135 were made during the years ended December 31, 2010, 2009 and 2008, respectively.

Fuel Tech, in the normal course of business, uses bank performance guarantees and letters of credit in support of construction contracts with customers as follows:

- in support of the warranty period defined in the contract; or
- in support of the system performance criteria that are defined in the contract.

In addition, Fuel Tech uses bank performance guarantees with standby letters of credit and performance surety bonds as security for contract performance and other obligations as needed in the normal course of business. As of December 31, 2010, Fuel Tech had outstanding bank performance obligations that may or may not result in cash obligations:

*Commitment expiration by period in thousands of dollars*

| Commercial Commitments | Total | 2011 | 2012-2013 | 2014-2015 | Thereafter |
| --- | ---: | ---: | ---: | ---: | ---: |
| Standby letters of credit and bank guarantees | $1,265 | $584 | $681 | $— | $— |
| Performance Surety Bonds | $2,156 | $2,156 | $— | $— | $— |
| Total | $3,421 | $2,740 | $681 | $— | $— |

### Off-Balance-Sheet Transactions

There were no off-balance-sheet transactions during the three-year period ended December 31, 2010.

## Market risk

As filed, 662 characters.

Fuel Tech’s earnings and cash flow are subject to fluctuations due to changes in foreign currency exchange rates. We do not enter into foreign currency forward contracts or into foreign currency option contracts to manage this risk due to the immaterial nature of the transactions involved.

Fuel Tech is also exposed to changes in interest rates primarily due to its debt arrangement (refer to Note 8 to the consolidated financial statements). A hypothetical 100 basis point adverse move in interest rates along the entire interest rate yield curve would not have a materially adverse effect on interest expense during the upcoming year ended December 31, 2011.

## Controls and procedures

As filed, 3,389 characters.

### Disclosure Controls and Procedures

Under the supervision and with the participation of our Chief Executive Officer and Chief Financial Officer, our management evaluated the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rule 13a-15(e) under the Exchange Act), as of the end of the period covered by this Annual Report on Form 10-K (the “Evaluation Date”). Based upon that evaluation, our Chief Executive Officer and Chief Financial Officer concluded that, as of the Evaluation Date, our disclosure controls and procedures are effective to ensure that information required to be disclosed in the reports that we file or submit under the Securities Exchange Act of 1934 is (i) recorded, processed, summarized and reported, within the time periods specified in the Securities and Exchange Commission’s rules and forms and (ii) accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.

### Change in Internal Controls

There has been no change in our internal control over financial reporting that occurred during our last fiscal quarter that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

### Management’s Report on Internal Control Over Financial Reporting

Fuel Tech’s management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Rule 13a-15(f) under the Exchange Act. As required by Rule 13a-15(c) under the Exchange Act, Fuel Tech’s management carried out an evaluation, with the participation of Fuel Tech’s Chief Executive Officer and Chief Financial Officer, of the effectiveness of its internal control over financial reporting as of the end of the last fiscal year. The framework on which such evaluation was based is contained in the report entitled “Internal Control—Integrated Framework” issued by the Committee of Sponsoring Organizations of the Treadway Commission (the “COSO Report”).

Fuel Tech’s system of internal control over financial reporting is designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

Based on its assessment, management has concluded that Fuel Tech maintained effective internal control over financial reporting as of December 31, 2010, based on criteria in “Internal Control - Integrated Framework” issued by the COSO.

McGladrey & Pullen, LLP, our independent registered public accounting firm, who audited and reported on the consolidated financial statements included in this Annual Report on Form 10-K, has issued an attestation report on the effectiveness of our internal control over financial reporting. This attestation report is included in Item 8 to this Annual Report on Form 10-K.

Filed Mar 9, 2011.
Source: SEC EDGAR, the filing index for accession 0000950123-11-023713. Last ingested by Listed: Nov 3, 2026, 20:38 ET. No prices; not investment advice.
