# Techprecision Corp: Form 10-Q for the period ended Jun 30, 2011

- Company: [Techprecision Corp](/companies/tpcs.md) (CIK 1328792)
- Form: 10-Q
- Filed: 2011-08-15
- Accepted by EDGAR: Aug 15, 2011, 17:21 ET
- Period: 2011-06-30
- Accession: 0000950159-11-000551
- Inline XBRL: no
- Main document: https://www.sec.gov/Archives/edgar/data/1328792/000095015911000551/tpcs10q.htm
- All documents and exhibits: https://www.sec.gov/Archives/edgar/data/1328792/000095015911000551/

## Management's discussion and analysis

As filed, 36,296 characters.

### Statement Regarding Forward Looking Disclosure

The following discussion of the results of our operations and financial condition should be read in conjunction with our consolidated financial statements and the related notes herein. This quarterly report on Form 10Q, including this section entitled “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” may contain predictive or “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements include, but are not limited to, statements that express our intentions, beliefs, expectations, strategies, predictions or any other statements relating to our future activities or other future events or conditions. These statements are based on current expectations, estimates and projections about our business based in part on assumptions made by management. These statements are not guarantees of future performance and involve risks, uncertainties and assumptions that are difficult to predict. Therefore, actual outcomes and results may, and probably will, differ materially from what is expressed or forecasted in the forward-looking statements due to numerous factors. Those factors include those risks discussed in this Item 2 “Management’s Discussion and Analysis” in this Form 10-Q and those described in any other filings which we make with the SEC. In addition, such statements could be affected by risks and uncertainties related to our ability to generate business on an on-going basis, to obtain any required financing, to receive contract awards from the competitive bidding process, maintain standards to enable us to manufacture products to exacting specifications, enter new markets for our services, marketing and customer acceptance, our reliance on a small number of customers for a significant percentage of our business, competition, government regulations and requirements, pricing and development difficulties, our ability to make acquisitions and successfully integrate those acquisitions with our business, as well as general industry and market conditions and growth rates, and general economic conditions. We undertake no obligation to publicly update or revise any forward looking statements to reflect events or circumstances that may arise after the date of this report, except as required by applicable law. Any forward-looking statements speak only as of the date on which they are made, and we do not undertake any obligation to update any forward-looking statement to reflect events or circumstances after the date of this report. Investors should evaluate any statements made by the Company in light of these important factors.

### Overview

We offer a full range of services required to transform raw materials into precise finished products. Our manufacturing capabilities include: fabrication operations that involve cutting, press and roll forming, assembly, welding, heat treating, blasting and painting; and machining operations which include CNC (computer numerical controlled) horizontal and vertical milling centers. We also provide support services to our manufacturing capabilities: manufacturing engineering (planning, fixture and tooling development, manufacturing activity), quality control (inspection and testing), materials procurement, and production control (scheduling, project management and expediting).

All manufacturing is done in accordance with our written quality assurance program, which meets specific national and international codes, standards, and specifications. Ranor holds several certificates of authorization issued by the American Society of Mechanical Engineers and the National Board of Boiler and Pressure Vessel Inspectors. The standards used are specific to the customers’ needs, and our manufacturing operations are conducted in accordance with these standards.

During the year ended March 31, 2011, demand for our services was relatively strong across all of the industries we serve. This trend continued through the first quarter of fiscal 2012. The Company concluded the year ended March 31, 2011, with an order backlog of $32.5 million. The order backlog for the quarter ended June 30, 2011 was $26.3 million. We expect to deliver this backlog during fiscal year 2012 and 2013. The Company’s comparable order backlog on June 30, 2010 was $25.2 million. Since June 30, 2011, the Company announced new orders totaling $5.2 million received from existing customers.

The Company historically has experienced, and continues to experience, customer concentration. Our largest customers, GT Solar, BAE Systems and Westinghouse accounted for 48%, 12% and 10% of our revenue respectively, for the three months ended June 30, 2011. For the three months ended June 30, 2010, GT Solar, BAE Systems and Westinghouse accounted for approximately 60%, 13% and 0% of our revenue respectively.

In any year, it is likely that five to six significant customers (albeit not always the same customers from year to year) will account for up to 90% in the aggregate of our total annual revenues. A significant loss of business from the Company’s largest customer or a combination of several of our significant customers could result in lower operating profitability and/or operating losses if the Company is unable to replace such lost revenue from other sources. A material, sustained downturn in revenue could make it more challenging for the Company to meet debt covenants under its existing long-term debt agreements. If the Company defaulted on such covenants and was unable to cure the defaults or obtain waivers, the lending bank could choose to accelerate payment of any amounts outstanding under various debt facilities and, under certain circumstances, the bank may be entitled to cancel the facilities. If the bank chose to accelerate our obligations, such acceleration may cause the Company’s cash position to deteriorate or, if cash on hand were insufficient to satisfy any payment due, may require the Company to obtain alternate financing.

Our contracts are generated both through negotiation with the customer and from bids made pursuant to a request for proposal. Our ability to receive contract awards is dependent upon the contracting party’s perception of such factors as our ability to perform on time, our history of performance, including quality, our financial condition and our ability to price our services competitively. Although some of our contracts contemplate the manufacture of one or a limited number of units, we continually seek more long-term projects with a more predictable cost structure. For the three months ended June 30, 2011, our sales and net income was $9.2 million and $0.4 million, as compared to sales of $6.2 million and net income of $0.8 million, for the three months ended June 30, 2010. Our gross margin for the three months ended June 30, 2011 was 26.4% as compared to 37.6% for the three months ended June 30, 2010. On a comparative basis, our quarterly revenue for the three month period ended June 30, 2011 increased by $3.0 million over the prior year with $2.0 million of the increase attributed to higher materials procurement revenues. As our gross margin on material procurement services is lower than the gross margin on our processing services, this shift in revenue mix lowered our first quarter gross margin for the quarter ended June 30, 2011 when compared with the same quarterly period a year ago.

Because our revenues are derived from the sale of goods manufactured pursuant to a contract, and we do not sell from inventory, it is necessary for us to constantly seek new contracts. There may be a time lag between our completion of one contract and commencement of work on another contract. During this period, we will continue to incur overhead expense but with lower revenue resulting in lower operating margins. Furthermore, changes in either the scope of a contract or the delivery schedule may impact the revenue we receive under the contract and the allocation of manpower. Although we provide manufacturing services for large governmental programs, we usually do not work directly for agencies of the United States government. Rather, we perform our services for large governmental contractors and OEM companies. However, our business is dependent in part on the continuation of governmental programs which require the services we provide.

### Growth Strategy

Our strategy is to leverage our core competence as a manufacturer of high-precision, large-scale metal fabrications and machined components to expand our business into areas that have shown increasing demand and which we believe could generate higher margins. In November 2010, we announced the formation of our China subsidiary, WCMC. This subsidiary was formed to respond to an existing customer’s desire to migrate their supply chain nearer to their end market within China. Since the formation of WCMC, we have received numerous inquiries from existing and potential customers for precision, large-scale fabricated and machined metal components and systems in Asia. Based on the initial interest expressed in our WCMC operation, we believe there are attractive opportunities to expand our WCMC operations.

### Diversifying Our Core Industries

We believe that rising energy demands along with increasing environmental concerns are likely to continue to drive demand in the alternative energy industry, particularly the solar, wind, LED and nuclear power industries. Because of our capabilities and the nature of the equipment required by companies in the alternative energy industries, we intend to focus our services in this sector. We also expect to market our services for medical device applications where customer requirements demand strict tolerances and an ability to manufacture complex heavy equipment.

As a result of both the increased prices of oil and gas and the resulting greenhouse gas emissions, nuclear power may become an increasingly important source of energy. In January 2010, the Obama administration increased the level of government-backed debt guarantees from $18 billion to $56 billion as an incentive to support the construction of new nuclear plants in the U.S. While trends in the nuclear power industry through February 2011 were favorable, the nuclear power problems in Japan and recent announcement that Germany will be exiting the nuclear power industry present emerging trends that may slow the pace of growth in the nuclear power industry in the near future. Revenues derived from the nuclear power industry were $1.0 million and $0.04 million for the three months ended June 30, 2011 and 2010, respectively. Currently, nuclear power related orders constitute approximately 4% of our backlog. Because of our manufacturing capabilities, our certification from the American Society of Mechanical Engineers and our historic relationships with suppliers in the nuclear power industry, we believe that we are well positioned to benefit from any increased activity in the nuclear sector. However, we cannot assure you that we will be able to develop any significant business from the nuclear industry.

In addition to the nuclear energy industry, we are also exploring potential business applications focused on the medical industry. These efforts include the development and fabrication of radioactive isotopes transportation/storage solutions and the development and fabrication of critical components for proton beam therapy machines designed to be utilized in the treatment of cancer. We believe that both our radioactive isotope transportation customers and our proton beam therapy customers are on track to obtain regulatory clearance of their respective products during calendar year 2011. If our customers are successful in clearing regulatory approvals during calendar year 2011, we believe we are positioned to benefit from production orders as they are cleared to begin marketing their respective regulated products. We currently, have an exclusive manufacturing contract with our proton beam therapy customer that could result in approximately $30 million in revenue over a three year period, following FDA clearance of their product.

Growing global demand for LED lighting and LED enabled products, has increased the worldwide demand for HEM sapphire as HEM sapphire is a core component in many high end LED products. Accordingly, many polysilicon companies like GT Solar are expanding into the field of HEM sapphire and existing players in the HEM sapphire industry are expanding their production capacity. The production of HEM sapphire requires robust high temperature furnaces much like those we have been producing for the processing of poly silicon in the solar industry. Accordingly we believe the sapphire field offers a growing sector where our manufacturing expertise and experience with solar products can be directly leveraged. We are in active dialogue with both existing customers and potential customers regarding our capability and capacity to manufacture furnaces for the HEM sapphire industry in both the U.S. and in Asia.

Historically we have participated in the multicrystalline segment of the solar industry through the manufacturing support we have provided GT Solar over the years. Increasingly GT Solar and other companies are focusing on production innovations that will improve the production efficiency and cost competitiveness of monocrystalline solar cells. To diversify our customer and sector concentration within the solar industry we are in active discussions with various companies focused on enabling production equipment for monocrystalline solar cells and believe these efforts will provide us with further technology and customer diversification in the future.

### Expansion of Manufacturing Capabilities

In addition to the expansion of our existing manufacturing capabilities, we may, from time to time, pursue opportunistic acquisitions to increase and strengthen our manufacturing, marketing, product development and customer diversification. On January 8, 2010, the Company issued a purchase order for the purchase of a gantry mill machine totaling $2.3 million. This purchase commitment represents an investment necessary to refresh and upgrade the Company’s fleet of manufacturing equipment and capabilities. Under this purchase commitment, the Company is obligated to make three equal payments beginning in January 2010 with the final payment to be made upon final delivery approximately one year from the purchase order date. A portion of the proceeds from the municipal bond financing may be used to finance acquisitions of qualifying manufacturing equipment to be installed at the Westminster facility, including remaining payments for the gantry mill machine. Additionally, in February 2011, we commenced construction of a 19,500 sq. ft. expansion of our Westminster, Massachusetts facility. This expansion is expected to be completed and placed into service during the second quarter of fiscal 2012.

### Revenue Recognition and Costs Incurred

We derive revenues from (i) the fabrication of large metal components for our customers, and (ii) the precision machining of such large metal components, including incidental engineering services.

Revenue and costs are recognized on the units of delivery method. This method recognizes as revenue the contract price of units of the product delivered during each period and the costs allocable to the delivered units as the cost of earned revenue. When the sales agreements provide for separate billing of engineering services, the revenues for those services are recognized when the services are completed. Costs allocable to undelivered units are reported in the balance sheet as costs incurred on uncompleted contracts. Amounts in excess of agreed upon contract price resulting from customer directed changes, constructive changes, customer delays or other causes of additional contract costs are recognized in contract value if it is probable that a claim for such amounts will result in additional revenue and the amounts can be reasonably estimated. Revisions in cost and profit estimates are reflected in the period in which the facts requiring the revision become known and are estimable. The unit of delivery method requires the existence of a contract to provide the persuasive evidence of an arrangement and determinable seller’s price, delivery of the product and reasonable collection prospects. The Company has written agreements with the customers that specify contract prices and delivery terms.

Adjustments to cost estimates are made periodically, and losses expected to be incurred on contracts in progress are charged to operations in the period such losses are determined and are reflected as reductions of the carrying value of the costs incurred on uncompleted contracts. Costs incurred on uncompleted contracts consist of labor, overhead, and materials. Work in process is stated at the lower of cost or market and reflects accrued losses, if required, on uncompleted contracts.

### Variable Interest Entity

We had consolidated WM Realty in fiscal year 2011, a variable interest entity controlled by our director, Andrew Levy, from which we leased real property located at Bella Drive, Westminster, Massachusetts. On December 20, 2010, through our wholly owned subsidiary, Ranor, Inc. (Ranor), we purchased this property pursuant to a Purchase and Sale Agreement by and among WM Realty and Ranor. Concurrent with the property purchase, the lease between Ranor and WM Realty was terminated, as of December 21, 2010 and we no longer include the VIE in our financial statements.

### Income Taxes

We provide for federal, state and foreign income taxes currently payable, as well as those deferred because of temporary differences between reporting income and expenses for financial statement purposes versus tax purposes. Deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences between carrying amount of assets and liabilities for financial reporting purposes and the amounts used for income tax purposes. Deferred tax assets and liabilities are measured using the enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recoverable. The effect of the change in the tax rates is recognized as income or expense in the period of the change. A valuation allowance is established, when necessary, to reduce deferred income taxes to the amount that is more likely than not to be realized.

As of June 30, 2011, our federal net operating loss carry-forward was approximately $1.8 million. If not utilized, the federal net operating loss carry-forwards of Ranor and TechPrecision will expire in 2025 and 2027, respectively. Furthermore, because of the over fifty-percent change in ownership as a consequence of the reverse acquisition in February 2006, the amount of net operating loss carry forward used in any one year in the future is substantially limited.

### New Accounting Pronouncements

See Note 2, Significant Accounting Policies, in the Notes to our Consolidated Financial Statements.

### Results of Operations

Our results of operations are affected by a number of external factors including the availability of raw materials, commodity prices (particularly steel), macroeconomic factors, including the availability of capital that may be needed by our customers, and political, regulatory and legal conditions in the United States and foreign markets.

Our results of operations are also affected by our success in booking new contracts and when we are able to recognize the related revenue because of delays in customer acceptances of our products, delays in deliveries of ordered products and our rate of progress in the fulfillment of our obligations under our contracts. A delay in deliveries or cancellations of orders would cause us to have inventories in excess of our short-term needs, and may delay our ability to recognize, or prevent us from recognizing, revenue on contracts in our order backlog.

During the three months ended June 30, 2011, we benefited from renewed orders from our largest customer, GT Solar, which began placing new orders in January 2010, after its significant order cancellation in April 2009. Sales to GT Solar during the three months ended June 30, 2011 totaled $4.4 million as compared to $3.7 million in sales during the same period in the prior year. At the end of the first quarter of fiscal 2012 our backlog was $26.3 million compared with $32.5 at March 31, 2011. Since June 30, 2011, the Company announced new orders totaling $5.2 million received from existing customers.

### Three Months Ended June 30, 2011 and 2010

The following table sets forth information from our statements of operations for the three months ended June 30, 2011 and 2010, in dollars and as a percentage of revenue (dollars in thousands):

|  | June 30, 2011 Amount | Percent | June 30, 2010 Amount | Percent | Changes Amount | Percent |
| --- | ---: | ---: | ---: | ---: | ---: | ---: |
| Net sales | $9,176 | 100% | $6,154 | 100% | $3,022 | 49% |
| Cost of sales | 6,750 | 74% | 3,838 | 62% | 2,912 | 76% |
| Gross profit | 2,426 | 26% | 2,316 | 38% | 110 | 5% |
| Selling, general and administrative | 1,732 | 19% | 1,018 | 16% | 714 | 70% |
| Income from operations | 694 | 7% | 1,298 | 22% | (604) | (47)% |
| Interest expense | (59) | --% | (108) | (2)% | 49 | (45)% |
| Other income (expense), net | 2 | --% | 60 | --% | (58) | --% |
| Income before income taxes | 638 | 7% | 1,250 | 20% | (612) | (49)% |
| Income tax expense | 256 | 3% | 431 | 7% | (175) | (41)% |
| Net income | $382 | 4% | $819 | 13% | $(437) | (53)% |

### Net Sales

Net sales increased by $3.0 million, or 49%, to $9.2 million for the three months ended June 30, 2011 when compared to the same period last year. Net sales to customers in Nuclear markets increased by $0.9 million, in Defense and Aerospace markets by $0.6 million, and in other Commercial markets by $0.8 million when compared with the three months ended June 30, 2010. In addition, net sales to our largest customer increased by $0.7 million during the quarter ended June 30, 2011 when compared with the same quarterly period one year ago.

### Cost of Sales and Gross Margin

Our cost of sales for the three months ended June 30, 2011 increased by $2.9 million to $6.8 million, or 74%, from $3.8 million for the same period in fiscal 2011. The increase in the cost of sales was principally due to an increase in shipments to our customers in all the markets we serve. Gross profit was $2.4 million or 26% of net sales compared with $2.3 million or 38% of net sales for the three month periods ended June 30, 2011 and 2010, respectively. Gross margin in any reporting period is impacted by the mix of services we provide on projects completed within that period. Generally, the margins we garner for materials procurement services are lower than the margins we charge for our materials processing services. The mix of services on projects completed in the first quarter ended June 30, 2010 included a historically low level of materials procurement services and, therefore, the reported gross margin was well above the reported gross margin of 30.7% for the full fiscal year ended March 31, 2011. The mix of processing and materials procurement services on projects closed during the first quarter ended June 30, 2011 included over $2.0 million more in material procurement services than the same period a year ago. This shift in mix served to decrease gross margin when compared to the reported gross margin for the comparable period one year ago.

### Selling, General and Administrative Expenses

Selling, general and administrative (“SG&A”) expenses for the three months ended June 30, 2011 were $1.7 million compared to $1.0 million for three months ended June 30, 2010, representing an increase of $0.7 million or 70%. SG&A was 19% as a percentage of sales during the first quarter of fiscal 2011, compared with 16.5% of net sales for the same period in fiscal 2011. Primary drivers of this increase in expense were higher staffing levels in the U.S. ($0.3 million) and China ($0.2 million) to support the China expansion and increased level of sales, marketing and business development efforts. Additionally, travel expenses increased by $0.14 million for the quarter ended June 30, 2011 when compared to the prior year’s same quarter primarily due to travel related to our China operation and increased business development activity. Additionally, we incurred $0.1 million in local operating costs for WCMC’s local selling general and administrative costs which in the current year for which there was not comparable costs in the prior year same quarter.

### Interest Expense

Interest expense decreased by 45% or $49,000 for the three months ended June 30, 2011 when compared with the same period in fiscal 2011. This reduction in interest expense is due to interest capitalized on the ongoing expansion project at our Westminster, Massachusetts facility and lower rates and average levels of long-term debt for the current year when compared to the prior year same quarter.

### Income Taxes

For the three months ended June 30, 2011, the Company recorded tax expense of $0.3 million compared with a tax expense of $0.4 million in the fiscal 2011. The estimated annual effective income tax rate for the current fiscal year is 39.5%. The difference between the provision for income taxes and the income tax determined by applying the statutory U.S. federal income tax and state income tax rates and the China Enterprise Tax rate was due primarily to differences in the book and tax basis of property and equipment, deductions for domestic production activities, timing differences of expenses related to share based compensation and the expected utilization of net operating loss carryforwards.

### Net Income

As a result of the factors described above, our net income was $0.4 million, or $0.02 and $0.01 per share basic and fully diluted respectively, for the three months ended June 30, 2011, compared to net income of $0.8 million, or $0.06 per share basic and $0.04 per share fully diluted, for the three months ended June 30, 2010.

### Liquidity and Capital Resources

At June 30, 2011, we had working capital of $12.5 million as compared with working capital of $13.6 million at March 31, 2011, representing a decrease of $1.1 million or 8%. The following table sets forth information as to the principal changes in the components of our working capital:

*(dollars in thousands)*

|  | June 30, 2011 | March 31, 2011 | Change Amount | Percentage Change |
| --- | ---: | ---: | ---: | ---: |
| Cash and cash equivalents | $7,340 | $7,541 | $(201) | (3)% |
| Accounts receivable, net | 2,420 | 5,578 | (3,158) | (57)% |
| Costs incurred on uncompleted contracts | 5,936 | 2,520 | 3,416 | 136% |
| Inventory - raw materials | 353 | 723 | (370) | (51)% |
| Other current assets | 682 | 442 | 240 | 54% |
| Current deferred taxes | 528 | 462 | (66) | (14)% |
| Accounts payable | 1,282 | 1,093 | 189 | 17% |
| Accrued expenses | 1,282 | 958 | 324 | 34% |
| Deferred revenue | 807 | 382 | 425 | 111% |

24

Cash provided by operations was $1.4 million for the three months ended June 30, 2011 as compared with cash provided by operations of $1.0 million for the three months ended June 30, 2010. Cash flows from operations were impacted by a decrease in net income, an increase in share based compensation and a reduction in inventory and accounts receivable when compared to the same period in the last fiscal year. An increase in manufacturing activity led to a higher balance of costs allocable to undelivered units incurred on uncompleted projects during the period and an increase in accounts payable, accrued expenses and deferred revenue. Since March 31, 2011, we have used approximately $1.0 million in cash to support operating activities in China, which includes $0.5 million for advances to suppliers and $0.3 million for inventory purchases.

We invested $1.5 million in new equipment and the expansion of our manufacturing facility in Westminster, Massachusetts during the three months ended June 30, 2011. On January 8, 2010, we issued a purchase order for the purchase of a gantry mill totaling $2.3 million. We made the first payment of $762,260 in fiscal 2010 and the second payment of $695,520 in fiscal 2011. The Company is committed to make the final payment of $842,220 upon delivery, which is anticipated to occur during August 2011. A bond financing arranged with the State of Massachusetts and the Bank in December 2010 provided additional financing capacity to fund the final payment on the gantry mill in fiscal 2012 as well as other qualifying manufacturing equipment. The December 2010 bond financing with the State of Massachusetts and the Bank also designated funds that could be utilized for the expansion of our Westminster, Massachusetts facility.

Net cash used in financing activities was $0.1 million during the three months ended June 30, 2011 as compared with net cash used in financing activities of $0.3 million for the same period in fiscal 2011. The primary use of cash under financing activities in fiscal 2012, were monthly installment payments on long-term debt for $0.4 million. We also borrowed an additional $0.3 million under the bond financing agreement to fund the ongoing plant and equipment expansion at our Westminster, Massachusetts facility. During the same period in the prior year, the Company repaid $0.2 million of long-term debt and distributed $0.1 million to the partners of WM Realty.

All of the above activity resulted in a net decrease in cash of $0.2 million for the three months ended June 30, 2011 compared with a $0.8 million cash increase for the three months ended June 30, 2010.

### Debt Facilities

On December 30, 2010, the Company completed a $6,200,000 tax exempt bond financing with the Massachusetts Development Finance Authority (“MDFA”) pursuant to which the MDFA sold to Sovereign Bank MDFA Revenue Bonds, Ranor Issue, Series 2010A in the original aggregate principal amount of $4,250,000 (“Series A Bonds”) and MDFA Revenue Bonds, Ranor Issue, Series 2010B in the original aggregate principal amount of $1,950,000 (“Series B Bonds”). The Bank and loaned the proceeds of such sale to the Company under the terms of that certain Mortgage Loan and Security Agreement, dated as of December 1, 2010, by and among the Company, MDFA and the Bank (as Bondowner and Disbursing Agent thereunder) (the “MLSA”).

The proceeds from the sale of the Series A Bonds were used to finance the previously disclosed Ranor facility acquisition and are also being used to finance the 19,500 sq. ft. expansion of Ranor’s manufacturing facility located in Westminster, MA. The proceeds of the sale of the Series B Bonds are being used to finance acquisitions of qualifying manufacturing equipment installed at the Westminster facility. Under the MLSA and related documents, the Westminster facility secures, and the Company further guarantees the Company’s obligations to the Bank and subsequent holders of the Bonds.

We have a revolving note with the Bank. The borrowing is limited to the sum of 70% or our eligible accounts receivable plus 40% of eligible inventory up to a maximum borrowing limit of $2.0 million. At June 30, 2011, there were no borrowings under the revolving note, and the maximum available under the revolving note was available. The revolving credit facility was renewed for another year on July 30, 2011.

The term note issued on February 24, 2006 has a term of seven years with an initial fixed interest rate of 9%. The interest rate on the term note converted from a fixed rate of 9% to a variable rate on February 28, 2011. From February 28, 2011 until maturity the term note will bear interest at the prime rate plus 1.5%, payable on a quarterly basis. Principal is payable in quarterly installments of $142,857 plus interest, with a final payment due on March 1, 2013. The balance outstanding on the term note as of June 30, 2011 and March 31, 2011 was $1.0 million and $1.1 million respectively.

In connection with the December 30, 2010 financing, the Company executed an Eighth Amendment to the Loan Agreement. The Eighth Amendment incorporates borrowing of the Bond proceeds into the borrowings covered by the Loan Agreement.

Under the MLSA and the Eighth Amendment, we must meet certain financial covenants applicable while the Bonds remain outstanding, including, among other things, that 1) the ratio of earnings available to cover fixed charges will be greater than or equal to 120%; 2) the interest coverage ration will equal or exceed 2:1 as of the end of each fiscal quarter, and 3) the leverage ratio will be less than or equal to 3:1. As of June 30, 2011, we were in compliance with all debt covenants.

Obligations under the notes to the bank are guaranteed by the Company. The loan collateral comprises all personal property of the Company, including cash, accounts receivable, inventories, equipment, financial and intangible assets.

We also had a $3.0 million capital expenditure facility which was available until November 30, 2009. The capital expenditure facility was not renewed upon its expiration on November 30, 2009 as the Company intends to finance future equipment purchases on a specific item basis. Principal and interest payments are due monthly based on a five year amortization schedule. The current rate of interest is based on LIBOR, plus 3%. Any unpaid balance on the capital expenditures facility is to be paid on November 30, 2014. As of June 30, 2011, there was $618,912 outstanding under this facility.

Under a Staged Advance Facility, the bank made certain loans to the Company limited to a cap of $1,900,000 for the purpose of acquiring a gantry mill machine. The machine will serve as collateral for the loan. The total aggregate amount of advances under this agreement cannot exceed 80% of the actual purchase price of the gantry mill machine. All advances provided for payment of interest only monthly through February 28, 2011, and thereafter no further borrowings are permitted under this facility. The interest rate is LIBOR plus 4%. Beginning on April 1, 2011, the Company is obligated to pay principal and interest sufficient to amortize the outstanding balance on a five year schedule. On March 29, 2010 and September 30, 2010, the Company drew down equal amounts of $556,416 under this facility to finance the purchase of the gantry mill machine. On December 30, 2010, the Company paid down principal of $556,416 with proceeds from the Series B Bonds, and amended the term loan agreement with Sovereign to cap advances at $556,416, with no further advances permitted. As of June 30, 2011, there was $537,869 outstanding under this facility.

We believe that the $2.0 million revolving credit facility, renewed on July 30, 2011 and unused as of June 30, 2011, our capacity to access equipment-specific financing, plus our current cash balance of $7.3 million and ability to generate cash from operations, will be sufficient to enable us to satisfy our cash requirements for the foreseeable future. Nevertheless, it is possible that we may require additional funds to the extent that we upgrade or expand our manufacturing facilities.

The securities purchase agreement pursuant to which we sold the Series A Convertible Preferred Stock to Barron Partners provides Barron Partners with a right of first refusal on future equity financings, which may affect our ability to raise funds from other sources if the need arises. In the event that we make an acquisition, we may require additional financing for the acquisition. We have no commitment from any party for additional funds, however, the terms of our agreement with Barron Partners, particularly the right of first refusal, may impair our ability to raise capital in the equity markets to the extent that potential investors would be reluctant to negotiate a financing when another party has a right to match the terms of the financing. We have no off-balance sheet assets or liabilities.

## Controls and procedures

As filed, 2,064 characters.

### Evaluation of Disclosure Controls and Procedures

As of June 30, 2011, we carried out an evaluation, under the supervision and with the participation of management, including our chief executive officer and chief financial officer, of the effectiveness of our disclosure controls and procedures (as defined in Rule 13a-15(e) under the Securities Exchange Act of 1934, as amended (“Exchange Act”)).

Disclosure controls and procedures are designed to ensure that information required to be disclosed by the Company in the reports that it files or submits to the SEC is recorded, processed, summarized and reported, within the time periods specified in SEC rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed is accumulated and communicated to the issuer’s management, including its principal executive and principal financial officers, or persons performing similar functions, as appropriate to allow timely decisions regarding required disclosure.

Based upon that evaluation, our chief executive officer and chief financial officer concluded that our disclosure controls and procedures were designed and operating effectively as of June 30, 2011, to provide reasonable assurance that information required to be disclosed by the Company in reports filed or submitted under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms and is accumulated and communicated to management, including our chief executive officer and chief financial officer, as appropriate to allow timely decisions regarding required disclosure.

### Changes in Internal Controls

During the three months ended June 30, 2011, there were no changes in our internal control over financial reporting identified in connection with the evaluation required by paragraph (d) of Rule 13a-15 that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

Filed Aug 15, 2011.
Source: SEC EDGAR, the filing index for accession 0000950159-11-000551. Last ingested by Listed: Nov 10, 2026, 04:27 ET. No prices; not investment advice.
