# Plug Power Inc: Form 10-K for the period ended Dec 31, 2010

- Company: [Plug Power Inc](/companies/plug.md) (CIK 1093691)
- Form: 10-K
- Filed: 2011-03-31
- Accepted by EDGAR: Mar 31, 2011, 21:01 ET
- Period: 2010-12-31
- Accession: 0001003297-11-000114
- Inline XBRL: no
- Main document: https://www.sec.gov/Archives/edgar/data/1093691/000100329711000114/es10k.htm
- All documents and exhibits: https://www.sec.gov/Archives/edgar/data/1093691/000100329711000114/

## Business

As filed, 22,293 characters.

### Company Background

Plug Power Inc., or the Company, is a leading provider of alternative energy technology focused on the design, development, commercialization and manufacture of fuel cell systems for the industrial off-road (forklift or material handling) market. Plug Power has also developed products for the back-up and stationary power markets worldwide. Effective April 1, 2010, the Company was no longer considered a development stage enterprise since its principal operations began to provide more than insignificant revenues as the Company received orders from repeat customers, increased its customer base and had a significant backlog. Prior to April 1, 2010, the Company was considered a development stage enterprise because substantially all of our resources and efforts were aimed at the discovery of new knowledge that could lead to significant improvement in fuel cell reliability and durability, and the establishment, expansion and stability of markets for our products.

We are focused on proton exchange membrane, or PEM, fuel cell and fuel processing technologies and fuel cell/battery hybrid technologies, from which multiple products are available. A fuel cell is an electrochemical device that combines hydrogen and oxygen to produce electricity and heat without combustion. Hydrogen is derived from hydrocarbon fuels such as liquid petroleum gas (LPG), natural gas, propane, methanol, ethanol, gasoline or biofuels. Hydrogen can also be obtained from the electrolysis of water. Hydrogen can be purchased directly from industrial gas providers or can be produced on-site at consumer locations.

We concentrate our efforts on developing, manufacturing and selling our hydrogen-fueled PEM GenDrive® products on commercial terms for industrial off-road (forklift or material handling) applications, with a focus on multi-shift high volume manufacturing and high throughput distribution sites.

We have previously invested in development and sales activities for low-temperature remote-prime power GenSys® products and our GenCore® product, which is a hydrogen fueled PEM fuel cell system to provide back-up power for critical infrastructure. While Plug Power will continue to service and support GenSys and/or GenCore products on a limited basis, our main focus is our Gendrive product line.

The Company sells its products worldwide, with a primary focus on North America, through our direct product sales force, original equipment manufacturers (OEMs) and their dealer networks. We sell to business, industrial and government customers.

We were organized in the State of Delaware on June 27, 1997 and became a public company listed on the NASDAQ exchange on October 29, 1999. We were originally a joint venture between Edison Development Corporation and Mechanical Technology Incorporated. In 2007, we acquired all the issued and outstanding equity of Cellex Power Products, Inc. (Cellex) and General Hydrogen Corporation (General Hydrogen). Through these acquisitions, and our continued GenDrive product development efforts, Plug Power became the first fuel cell company to offer a complete suite of products; Class 1 - sit-down counterbalance trucks, Class 2 – stand-up reach trucks and Class 3 – rider pallet trucks. The launch of our Class 2 product occurred in January of 2010.

Unless the context indicates otherwise, the terms “Company,” “Plug Power,” “we,” “our” or “us” as used herein refers to Plug Power Inc. and its subsidiaries.

### Business Strategy

We are committed to developing effective, economical and reliable fuel cell products and services for businesses, government agencies and commercial consumers. Building on our substantial fuel cell application and product integration experience, we are focused on generating strong relationships with customers who value increased reliability, productivity, energy security and a sustainable future.

Our business strategy leverages our unique fuel cell application and integration knowledge to identify early adopter markets for which we can design and develop innovative systems and customer solutions that provide superior value, ease-of-use and environmental design.

We have made significant progress in our analysis of the material handling and stationary power markets. We believe we have developed reliable products which allow the end customers to eliminate incumbent power sources from their operations, and realize their sustainability objectives through clean energy alternatives.

Our strategy is to focus our resources on the material handling market with GenDrive, a superior alternative to lead-acid batteries. Our strategy also includes the following objectives: decrease product costs by leveraging the supply chain, lower manufacturing costs, improve system reliability, expand our sales network to effectively reach more of our targeted customers and provide customers with high-quality products, service and post-sales support experience.

Our longer-term objectives are to deliver economic, social, and environmental benefits in terms of reliable, clean, cost-effective fuel cell solutions and, ultimately, sustainability.

We believe continued investment in research and development is critical to the development and enhancement of innovative products, technologies and services. In addition to evolving our direct hydrogen fueled systems, we continue to capitalize on our investment in power electronics, controls, software and reforming technology.

### Business Organization

We manage our business as a single enterprise, emphasizing shared learning across end-user applications and common supplier/vendor relationships.

### Products

We sell and continue to develop a range of fuel cell products to replace lead-acid batteries in material handling vehicles and industrial trucks for some of North America’s largest distribution and manufacturing businesses. Our primary product line is GenDrive®, a hydrogen fueled PEM fuel cell system to provide power to industrial vehicles. We are focusing our efforts on material handling applications (forklifts) at multi-shift high volume manufacturing and high throughput distribution sites where our products and services provide a unique combination of productivity, flexibility and environmental benefits. Plug Power has introduced new GenDrive product offerings to augment our product suite and allow full site conversions. During the year, we experienced add-on orders from Walmart, Coca-Cola, Sysco and Central Grocers. We also received several other new orders from various companies, some of which have not been publicly announced. We expect continued sales momentum in 2011 with our key target customers.

In 2010, we repositioned the majority of our GenSys business to focus our resources on our continued success in the material handling market. In furtherance of this objective, in October 2010, the Company licensed the intellectual property relating to its stationary power products, GenCore and GenSys, to IdaTech plc on a non-exclusive basis. Plug Power maintains ownership of, and the right to use, the patents and other intellectual property licensed to IdaTech. As part of the transaction, Plug Power also sold inventory, equipment and certain other assets related to its stationary power business. Total consideration for the licensing and assets was $5 million and was received during October 2010. The consideration is subject to reduction by a maximum of $1 million in the event that the Company does not deliver certain of the assets sold. As of December 31, 2010, $1.0 million is included in assets held for sale in the consolidated balance sheets.

We continue to develop and monitor future iterations of our products aligned with our evolving product roadmap. Plug Power currently has 85% market share in the fuel cell powered material handling industry and is transforming the US fuel cell manufacturing industry into a globally competitive force that will lead to the export, rather than the import, of these innovative energy products.

### Product Support & Services

To promote fuel cell adoption and maintain post-sale customer satisfaction, we offer a range of service and support options. These options include installation, commissioning, remote monitoring, product manuals, as well as on-site technical support.

Additionally, GenDrive product support and services may also include customer training and using available lift truck dealer networks’ service personnel. Such personnel may assist with the commissioning and installation of GenDrive products and, in some cases, regularly scheduled preventative maintenance.

### Markets/Geography & Order Status

Our commercial sales for GenDrive products are in the material handling market, which primarily consist of large fleet, multi-shift operations in high-volume manufacturing and high-throughput distribution centers. In 2010, all of our GenDrive product installations were in North America.

We shipped 650 units and received 543 orders for our GenDrive product during the year ending December 31, 2010. Backlog on December 31, 2010 was 527 units representing approximately $12.8 million in billable value including approximately $700,000 related to 20 GenDrive products that were awarded under various government projects that were unfunded as of December 31, 2010. Backlog on December 31, 2009 was 654 units representing approximately $15.6 million in billable value which includes approximately $700,000 related to 20 GenDrive products that were awarded under various government projects that were unfunded as of December 31, 2009.

| GenDrive | 2010 | 2009 |
| --- | ---: | ---: |
| Product Shipments | 552 | 131 |
| Lease Shipments | 98 | 140 |
| Cancellations | 20 | - |
| Orders | 543 | 584 |
| Backlog | 527 | 654 |

Under all product lines, we have accepted orders that require certain conditions or contingencies to be satisfied prior to shipment, some of which are outside of our control. Historically, shipments made against these orders generally occur between ninety (90) days and twenty-four (24) months from the date of acceptance of the order.

The assembly of GenDrive products that we sell is performed at our manufacturing facility in Latham, New York. Currently, the supply and manufacture of several critical components used in our products are performed by sole-sourced third-party vendors in the U.S. and Canada.

We intend to focus our efforts on developing, manufacturing and selling our GenDrive products and do not expect to develop or manufacture GenSys or GenCore products in the near term.

In 2010, to the extent of existing purchase commitments, we continued to manufacture and support our GenCore® product, a hydrogen fueled PEM fuel cell system to provide back-up power for critical infrastructure. We received 2 orders during the year ending December 31, 2009. Backlog on December 31, 2009 was 10 units representing approximately $130,000 in billable value. On February 23, 2009, our Distributor Agreement with IST Telecom expired; 100 units that had been ordered pursuant to this Distributor Agreement and in backlog were cancelled.

| GenCore | 2010 | 2009 |
| --- | ---: | ---: |
| Shipments | 10 | 31 |
| Cancellations | - | 101 |
| Orders | - | 2 |
| Backlog | - | 10 |

The assembly of GenCore products that we sell is performed at our manufacturing facility in Latham, New York. Currently, the supply and manufacture of several critical components used in our products are performed by sole-sourced third-party vendors in the U.S. and Canada.

### Distribution, Marketing and Strategic Relationships

We have developed strategic relationships with well-established companies in key areas including distribution, service, marketing, supply, technology development and product development. We sell our products worldwide, with a primary focus on North America, through our direct product sales force, original equipment manufacturers (OEMs) and their dealer networks.

At December 31, 2010, contracts with two customers and one federal government agency each accounted for 10% or more of total consolidated revenues.

### Competition

We are confronted by aggressive competition in all areas of our business. The markets we address for motive power are characterized by the presence of well-established battery and combustion generator products in addition to several competing fuel cell companies. Over the past several years, there has been price competition in these markets. The principal competitive factors in the markets in which we operate include price, product features, including size and weight, relative price and performance, product quality and reliability, design innovation, marketing and distribution capability, service and support and corporate reputation.

In the material handling market, we believe our GenDrive products have an advantage over lead-acid batteries for customers who run high-throughput distribution centers with multi shift operations by offering increased productivity with lower operational costs. However, we expect competition in this space to intensify as competitors attempt to imitate our approach with their own offerings. Some of these current and potential competitors have substantial resources and may be able to provide such products and services at little or no profit or even at a loss to compete with our offerings.

### Intellectual Property

We believe that neither we nor our competitors can achieve a significant proprietary position on the basic technologies currently used in PEM fuel cell systems. However, we believe the design and integration of our system and system components, as well as some of the low-cost manufacturing processes that we have developed, are intellectual property that can be protected. Our intellectual property portfolio covers among other things: fuel cell components that reduce manufacturing part count; fuel cell system designs that lend themselves to mass manufacturing; improvements to fuel cell system efficiency, reliability and system life; and control strategies, such as added safety protections and operation under extreme conditions. In general, our employees are party to agreements providing that all inventions (whether patented or not) made or conceived while an employee of Plug Power, which are related to or result from work or research that Plug Power performs, will remain the sole and exclusive property of Plug Power.

During 2010, the U.S. Patent and Trademark Office issued one new patent to the Company and we currently have a total of 150 issued patents. We also have 21 U.S. patent applications pending. The number of pending patent applications decreased in 2010 as we continued our efforts to focus our intellectual property protection on our current product offerings. Additionally, we have seven trademarks registered with the U.S. Patent and Trademark Office.

Furthermore, as of December 31, 2010 there were 26 pending U.S. patent applications filed on behalf of Honda and one U.S. patent issued to Honda relating to joint development work on the Home Energy Station (HES) and to which we have certain rights.

In October 2010, the Company licensed the intellectual property relating to its stationary power products, GenCore and GenSys, to IdaTech plc on a non-exclusive basis. Plug Power maintains ownership of, and the right to use, the patents and other intellectual property licensed to IdeaTech. As part of the transaction, Plug Power also sold inventory, equipment and certain other assets related to its stationary power business. Total consideration for the licensing and assets was $5 million and was received during October 2010. The consideration is subject to reduction by a maximum of $1 million in the event that the Company does not deliver certain of the assets sold. As of December 31, 2010, $1.0 million is included in assets held for sale in the consolidated balance sheets.

### Government Regulation

We believe that we will not be subject to existing federal and state regulatory commissions governing traditional electric utilities and other regulated entities. Our products and their installations are, however, subject to oversight and regulation at the state and local level in accordance with state and local statutes and ordinances relating to, among others, building codes, fire codes, public safety, electrical and gas pipeline connections and hydrogen siting. The level of regulation may depend, in part, upon where a system is located. For example, the 2008 National Electrical Code (NEC) is a model code written by the National Fire Protection Association, or NFPA, that governs the electrical wiring of most homes, businesses and other buildings in the United States. The NEC has been adopted by local jurisdictions throughout the United States and is enforced by local officials, such as building and electrical inspectors. Article 692 of the NEC governs the installation of stationary fuel cell systems, such as our GenSys or GenCore products. Accordingly, all of our stationary products installed in a jurisdiction that has adopted the NEC are installed in accordance with Article 692.

In addition, product safety standards have been established by the American National Standards Institute (ANSI) covering the overall fuel cell system. When in production, our GenCore product was certified by independent third-parties such as the Canadian Standards Association (CSA International) to be in compliance with such ANSI standards. Additionally, the F2 and F3 GenDrive products are designed with the intent of meeting the requirements of UL 2267 “Fuel Cell Power Systems for Installation in Industrial Electric Trucks” and NFPA 505 “Fire Safety Standard for Powered Industrial Trucks.” The hydrogen tanks used in these systems have been either certified to ANSI/CSA NGV2-2007 or designed to meet ISO/TS 15869 “Gaseous hydrogen and hydrogen blends-Land vehicle fuel tanks.” We will continue to design our GenDrive products to meet ANSI and/or other standards in 2011. Other than these requirements, at this time we do not know what additional requirements, if any, each jurisdiction will impose on our products or their installation. We also do not know the extent to which any new regulations may impact our ability to distribute, install and service our products. As we continue distributing our systems to our target markets, the federal, state or local government entities may seek to impose regulations or competitors may seek to influence regulations through lobbying efforts.

### Raw Materials

Although most components essential to our business are generally available from multiple sources, we currently obtain certain key components including, but not limited to, fuel cell stack materials and energy storage devices, from single or limited sources. In 2010, Plug Power signed a supply agreement with Ballard Power Systems (Ballard) which continues through December 31, 2014. Under this agreement, Ballard serves as the exclusive supplier of fuel cell stacks for Plug Power’s GenDrive product line for North America.

We believe there are several component suppliers and manufacturing vendors whose loss to the Company could have a material adverse effect upon our business and financial condition. At this time, such vendors include, but are not limited to, Ballard, Air Squared, Inc. (Air Squared) and Citic GuoAn Mengguli Power Science & Technology Co. Ltd. (MGL). We attempt to mitigate these potential risks by working closely with these and other key suppliers on product introduction plans, strategic inventories, coordinated product introductions and internal and external manufacturing schedules and levels.

### Research and Development

Because the fuel cell industry is characterized by its early state of adoption, our ability to compete successfully is heavily dependent upon our ability to ensure a continual and timely flow of competitive products, services, and technologies to the marketplace. We continue to develop new products and technologies and to enhance existing products in the areas of cost, size, weight, and in supporting service solutions in order to drive commercialization. We may expand the range of our product offerings and intellectual property through licensing and/or acquisition of third-party business and technology. Our research and development expense totaled $12.9 million, $16.3 million and $35.0 million in 2010, 2009 and 2008, respectively. We also had cost of research and development contract revenue of $6.4 million, $12.4 million and $21.5 million in 2010, 2009 and 2008, respectively. These expenses represent the cost of research and development programs that are partially funded under cost reimbursement research and development arrangements with third parties.

### Employees

As of December 31, 2010, we had 149 employees, which includes 133 full time employees.

### Financial Information About Geographic Areas

Please refer to our Geographic Information included in our Consolidated Financial Statements and notes thereto included in Part II, Item 8: Financial Statements and Supplementary Data of this Form 10-K.

### Available Information

Our Annual Report on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act are available free of charge, other than an investor’s own internet access charges, on the Company’s website with an internet address of www.plugpower.com as soon as reasonably practicable after the Company electronically files such material with, or furnishes it to the Securities and Exchange Commission (SEC). The information contained on our website is not included as a part of, or incorporated by reference into, this Annual Report on Form 10-K. The public may read and copy any materials the Company files with the SEC at the SEC’s Public Reference Room at 100 F Street, N.E., Washington, DC 20549. The public may also obtain information on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330. The SEC also maintains an internet site that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC. The SEC’s website address is http://www.sec.gov.

## Risk factors

As filed, 45,083 characters.

The following risk factors should be considered carefully in addition to the other information in this Annual Report on Form 10-K. The occurrence of any of the following material risks could harm our business and future results of operations and could result in the trading price of our common stock declining and a partial or complete loss of your investment. These risks are not the only ones that we face. Additional risks not presently known to us or that we currently consider immaterial may also impair our business operations and trading price of our common stock. Except as mentioned under “Quantitative and Qualitative Disclosure About Market Risk” and except for the historical information contained herein, the discussion contained in this Annual Report on Form 10-K contains “forward-looking statements,” within the meaning of Section 27A of the Securities Act and Section 21E of the Exchange Act, that involve risks and uncertainties. Please refer to the section entitled “Forward-Looking Statements.”

**We have incurred losses, anticipate continuing to incur losses and might never achieve or maintain profitability.**

We have not achieved profitability in any quarter since our formation and we will continue to incur net losses until we can produce sufficient revenue to cover our costs. Our net losses were approximately $50.3 million in 2006, $60.6 million in 2007, $121.7 million in 2008, $40.7 million in 2009 and $47.0 million in 2010. As of December 31, 2010, we had an accumulated deficit of $727.3 million. We anticipate that we will continue to incur losses until we can produce and sell our products on a large-scale and cost-effective basis. Substantially all of our losses resulted from costs incurred in connection with our operating expenses, research and development expenses and from general and administrative costs associated with our operations. We cannot guarantee when we will operate profitably, if ever. In order to achieve profitability, among other factors, management must successfully execute our planned path to profitability in the early adoption markets on which we are focused, the hydrogen infrastructure that is needed to support our growth readiness and cost efficiency must be available and cost efficient, we must: 1) continue to shorten the cycles in our product roadmap with respect to: (a) product reliability and performance that our customers expect and (b) successful introduction of our products into the market, 2) accurately evaluate our markets for, and react to, competitive threats in both other technologies (such as advanced batteries) and our technology field, and 3) we must continue to lower our products’ build costs and lifetime service costs. If we are unable to successfully take these steps, we may never operate profitably, and, even if we do achieve profitability, we may be unable to sustain or increase our profitability in the future.

**We expect we will need to raise additional capital to fund our operations beyond the first quarter of 2012 and such capital may not be available to us, in which case we may need to reduce and/or cease our operations.**

Since inception, we have funded our operations primarily through private and public offerings of our common and preferred stock, borrowings under our line of credit and maturities and sales of our available-for-sale securities. Because we may not have adequate capital to fund our operations beyond the first quarter of 2012, during 2011 we expect we will need to raise additional funds for our operations through equity or debt financings, strategic alliances or otherwise. Our future liquidity and capital requirements will depend upon numerous factors, including the following: the timing and quantity of product orders and shipments, the extent to which we can effectuate the May 2010 restructuring plan; the timing and amount of our operating expenses; the timing and costs of working capital needs; the timing and costs of building a sales base; the timing and costs of developing marketing and distribution channels; the timing and costs of product service requirements; the timing and costs of hiring and training product staff; the extent to which our products gain market acceptance; the timing and costs of product development and introductions; the extent of our ongoing and any new research and development programs; and changes in our strategy or our planned activities. If we are unable to obtain additional capital prior to the end of 2011, we may not be able to sustain our future operations and may be required to delay, reduce and/or cease our operations and/or seek bankruptcy protection. If we raise additional funds through the issuance of equity or convertible debt securities, the percentage ownership of our stockholders could be significantly diluted, and these newly issued securities may have rights, preferences or privileges senior to those of existing stockholders. If we incur additional debt, a substantial portion of our operating cash flow may be dedicated to the payment of principal and interest on such indebtedness, thus limiting funds available for our business activities. The terms of any debt securities issued could also impose significant restrictions on our operations. We cannot assure you that any necessary additional financing will be available on terms favorable to us, or at all. Given the difficult current economic environment, we believe that it could be difficult to raise additional funds and there can be no assurance as to the availability of additional financing or the terms upon which additional financing may be available. In recent years and months, the stock market in general, and the NASDAQ Capital Market and the market for smaller capitalized companies in particular, have experienced significant price and volume fluctuations that may have been unrelated or disproportionate to the operating performance of the listed companies. Broad market and industry factors may seriously harm the market price of our common stock, regardless of our operating performance, and may adversely impact our ability to raise additional funds. Similarly, if our common stock is delisted from the NASDAQ Capital Market, it may limit our ability to raise additional funds. If we raise additional funds through collaborations and/or licensing arrangements, we might be required to relinquish significant rights to our technologies, or grant licenses on terms that are not favorable to us. If adequate funds are not available prior to the end of 2011, we may be required to reduce, delay and/or cease our operations and/or seek bankruptcy protection. Additionally, even if we raise sufficient capital through equity or debt financing, strategic alliances or otherwise, there can be no assurances that the revenue or capital infusion will be sufficient to enable us to develop our business to a level where it will be profitable or generate positive cash flow.

**We do not have extensive experience in manufacturing and marketing our products and, as a result, may be unable to sustain a profitable commercial market for our new and existing products.**

From 1997 to 2008, we have focused primarily on research and development of fuel cell systems. In the latter half of 2008, Plug Power shifted to focus the viable commercialization of our fuel cell products. In 2000, we completed construction of our 50,000 square foot manufacturing facility and have continued to develop our manufacturing capabilities and processes. While we have been manufacturing our products in small quantities for several years, we do not have extensive experience in mass-manufacturing and marketing our products. We do not know whether or when we will be able to develop efficient, low-cost manufacturing capabilities and processes that will enable us to manufacture our products in commercial quantities while meeting the quality, price, engineering, design, and production standards required to profitably market our products. Even if we are successful in developing our manufacturing capabilities and processes, we do not know whether we will do so in time to meet our product commercialization schedule or to satisfy the requirements of our distributors or customers. Before investing in our common stock, you should consider the challenges, expenses and difficulties that we will face as an emerging technology company seeking to sustain a viable commercial market for our new and existing products. If we are unable to sustain a viable commercial market for our products, that failure would have a material adverse effect on our business, prospects, financial condition and results of operations.

**Our purchase orders may not ship, be commissioned or installed, or convert to revenue, in whole or in part; and our pending orders may not convert to purchase orders, in whole or in part; and our pending orders may not convert to purchase orders, in whole or in part, which may have a material adverse effect on our revenue and cash flow.**

We have accepted orders from certain customers, which may include firm orders, stocking orders and orders that require certain conditions or contingencies to be satisfied prior to shipment or prior to commissioning or installation, some of which are outside of our control. Historically, shipments made against these orders have generally occurred between ninety (90) days and twenty-four (24) months from the date of acceptance of the order. Orders received during the year ended December 31, 2010 totaled 543 units. Backlog on December 31, 2010 was 527 units. Of the unit orders in backlog on December 31, 2010, orders for 144 units were older than 12 months. The time periods from receipt of an order to shipment date and installation vary widely and are determined by a number of factors, including the terms of the customer contract and the customer’s deployment plan. There may also be product redesign or modification requirements that must be satisfied prior to shipment of units under certain of our agreements. If the redesigns or modifications are not completed, some or all of our orders may not ship or convert to revenue. We also have publicly discussed anticipated, pending orders with potential customers; however, those potential customers may require certain conditions or contingencies to be satisfied prior to issuing a purchase order to the Company, some of which are outside of our control. Such conditions or contingencies that may be required to be satisfied before the Company’s receipt of a purchase order may include, but are not limited to, successful product demonstrations or field trials. Some conditions or contingencies that are out of our control may include, but are not limited to, government tax policy, government funding programs, and government incentive programs. Additionally, some conditions and contingencies may extend for several years. We may have to compensate customers, by either reimbursement, forfeiting portions of associated revenue, or other methods depending on the terms of the customer contract, based on the failure on any of these conditions or contingencies. This could have an adverse impact on our revenue and cash flow.

**A continued failure to comply with NASDAQ’s listing standards could result in the delisting of our common stock from the NASDAQ Capital Market and severely limit the ability to trade our common stock and to raise additional capital.**

As a result of a failure to comply with NASDAQ’s $1.00 minimum bid price requirement, effective as of June 7, 2010, our common stock listing was transferred to the NASDAQ Capital Market from the NASDAQ Global Market. The Company was given 180 calendar days, or until December 6, 2010, to regain compliance with the minimum bid price requirement, but failed to do so. On December 7, 2010, the NASDAQ Listing Qualifications Panel stayed a delisting action pending the Company’s request for a hearing before the NASDAQ Hearing Panel on January 20, 2011. After the hearing, on February 1, 2011, the NASDAQ Hearing Panel granted Plug Power a final extension, until June 30, 2011, to evidence a closing bid price of $1.00 or more for a minimum of ten consecutive business days. If Plug Power does not regain compliance with the minimum bid price requirement by June 6, 2011, the Hearing Panel will issue a final determination to delist the Company’s shares and suspend trading of the Company’s shares on the NASDAQ market effective on the second business day from the date of the final determination. If our common stock is delisted and we are unable to list on another exchange, the ability to trade and effectuate public offerings in our common stock would be severely, if not completely, limited.

**Our stock price has been and could remain volatile, which could adversely affect the price of our stock, our ability to raise additional capital and/or cause us to be subject to securities class action litigation.**

The market price of our common stock has historically experienced and may continue to experience significant volatility. In 2010, the market price of our common stock fluctuated from a high of $0.74 per share in the first quarter of 2010 to a low of $0.36 per share in the second quarter of 2010. Our progress in developing and commercializing our products, our quarterly operating results, announcements of new products by us or our competitors, our perceived prospects, changes in securities’ analysts’ recommendations or earnings estimates, changes in general conditions in the economy or the financial markets, adverse events related to our strategic relationships, significant sales of our common stock by existing stockholders, including one or more of our strategic partners, and other developments affecting us or our competitors could cause the market price of our common stock to fluctuate substantially. In addition, in recent years, the stock market has experienced significant price and volume fluctuations. This volatility has affected the market prices of securities issued by many companies for reasons unrelated to their operating performance and may adversely affect the price of our common stock. Such market price volatility could adversely affect our ability to raise additional capital. In addition, we may be subject to additional securities class action litigation as a result of volatility in the price of our common stock, which could result in substantial costs and diversion of management’s attention and resources and could harm our stock price, business, prospects, results of operations and financial condition.

**The loss of one or more of our key supply partners could have a material adverse effect on our business.**

We have certain key suppliers, such as Ballard, Air Squared and MGL, that we rely on for critical components in our products and there are numerous other components for our products that are sole sourced. A supplier’s failure to develop and supply components in a timely manner or at all, or to develop or supply components that meet our quality, quantity or cost requirements, or our inability to obtain substitute sources of these components on a timely basis or on terms acceptable to us, could harm our ability to manufacture our products. In addition, to the extent that our supply partners use technology or manufacturing processes that are proprietary, we may be unable to obtain comparable components from alternative sources.

**OJSC (Third Generation Company of the Wholesale Electricity Market) (OGK-3) has substantial control over us and could limit stockholders’ ability to influence the outcome of key transactions, including a change of control.**

OGK-3 owns approximately 33.7% of the outstanding shares of our common stock. As a result, OGK-3 can significantly influence or control certain matters requiring approval by our stockholders, including the approval of mergers or other extraordinary transactions. The interests of OGK‑3 may differ from the interest of the Company and its other stockholders, and OGK‑3 may vote in a way which may be adverse to the interests of the Company and its other stockholders. This concentration of ownership may have the effect of delaying, preventing or deterring key transactions such as a change of control of our Company, could deprive our stockholders of an opportunity to receive a premium for their common stock as part of a sale of our Company and might ultimately affect the market price of our common stock.

**The sale by OGK-3 of a substantial number of shares of the Company’s common stock could cause the market price of our common stock to decline and adversely affect our ability to remain listed on an exchange and/or raise capital through equity offerings.**

OGK-3 holds 44,626,939 shares of common stock as of March 29, 2011, which represent in the aggregate approximately 33.7% of the Company’s outstanding common stock. In 2010, OGK‑3 announced an intention to sell some or all of its Plug Power Inc. common stock. If OGK-3 or its affiliates sell substantial amounts of our common stock in the public market, the market price of our common stock could decrease significantly. The overhang caused by OGK-3’s announced plan to sell shares of common stock could also depress the trading price of our common stock. A decline in the price of shares of our common stock might impede our ability to continue to remain listed on the NASDAQ Capital Market and raise capital through the issuance of additional shares of our common stock or other equity securities.

**The dependency of our GenDrive product on hydrogen and our lack of control over or limited availability of such fuel may adversely impact our sales and product deployment.**

Our products depend largely on the availability of natural gas and hydrogen gas. We are dependant upon hydrogen suppliers for success with the profitable commercialization of our GenDrive product. Although we will continue to work with hydrogen suppliers to mutually agree on terms for our customers, including, but not limited to, price of the hydrogen molecules, liquid hydrogen, hydrogen infrastructure and service costs, to the benefit of our GenDrive product value proposition, ultimately we have no control over such third parties. If these fuels are not readily available or if their prices are such that energy produced by our products costs more than energy provided by other sources, then our products could be less attractive to potential users and our products’ value proposition could be negatively affected. If hydrogen suppliers elect not to participate in the material handling market, there may be an insufficient supply of hydrogen for this market that could negatively affect our sales and deployment of our GenDrive product.

**A robust market for our GenDrive products may never develop or may take longer to develop than we anticipate.**

We believe we have identified viable markets for our GenDrive products, however our products represent emerging technologies, and we do not know the extent to which our targeted customers will want to purchase them and whether end-users will want to use them. If a sizable market fails to develop or develops more slowly than we anticipate, we may be unable to recover the losses we will have incurred to develop our products and may be unable to achieve profitability. The development of a sizable market for our products may be impacted by many factors which are out of our control, including: (i) the cost competitiveness of our products; (ii) the future costs of natural gas, hydrogen and other fuels expected to be used by our products; (iii) consumer reluctance to try a new product; (iv) consumer perceptions of our products’ safety; (v) regulatory requirements; (vi) barriers to entry created by existing energy providers; and (vii) the emergence of newer, more competitive technologies and products.

**We may be unable to establish or maintain relationships with third parties for certain aspects of continued product development, manufacturing, distribution and servicing and the supply of key components for our products.**

We will need to maintain and may need to enter into additional strategic relationships in order to complete our current product development and commercialization plans. We will also require partners to assist in the sale, servicing and supply of components for our anticipated products, which are in development. If we are unable to identify or enter into satisfactory agreements with potential partners, including those relating to the distribution, service and support of our anticipated products, we may not be able to complete our product development and commercialization plans on schedule or at all. We may also need to scale back these plans in the absence of needed partners, which would adversely affect our future prospects for development and commercialization of future products. In addition, any arrangement with a strategic partner may require us to issue a significant amount of equity securities to the partner, provide the partner with representation on our board of directors and/or commit significant financial resources to fund our product development efforts in exchange for their assistance or the contribution to us of intellectual property. Any such issuance of equity securities would reduce the percentage ownership of our then current stockholders. While we have entered into relationships with suppliers of some key components for our products, we do not know when or whether we will secure supply relationships for all required components and subsystems for our products, or whether such relationships will be on terms that will allow us to achieve our objectives. Our business prospects, results of operations and financial condition could be harmed if we fail to secure relationships with entities which can develop or supply the required components for our products and provide the required distribution and servicing support. Additionally, the agreements governing our current relationships allow for termination by our partners under certain circumstances, some of which are beyond our control. If any of our current strategic partners were to terminate any of its agreements with us, there could be a material adverse impact on the continued development and profitable commercialization of our products and the operation of our business, financial condition, results of operations and prospects.

**Unless we lower the cost of our GenDrive products and demonstrate their reliability, our product sales could be adversely affected.**

The initial capital cost of our GenDrive products is currently higher than many established competing technologies. If we are unable to develop and continue the current development of products that are competitive with competing technologies in terms of price, reliability and longevity, consumers will be unlikely to buy our products. The profitability of our products depends largely on material and manufacturing costs. We cannot guarantee that we will be able to lower these costs to the level where we will be able to produce a competitive product or that any product produced using lower cost materials and manufacturing processes will not suffer from a reduction in performance, reliability and longevity.

**We face risks associated with our plans to market, distribute and service our GenDrive products internationally.**

We intend to market, distribute, sell and service our GenDrive products internationally. We have limited experience developing and manufacturing our products to comply with the commercial and legal requirements of international markets. Our success in international markets will depend, in part, on our ability and that of our partners to secure relationships with foreign sub-distributors, and our ability to manufacture products that meet foreign regulatory and commercial requirements. Additionally, our planned international operations are subject to other inherent risks, including potential difficulties in enforcing contractual obligations and intellectual property rights in foreign countries and fluctuations in currency exchange rates. Also, to the extent our operations and assets are located in foreign countries, they are potentially subject to nationalization actions over which we will have no control.

**Delays in our product development could have a material impact on the profitable commercialization of our products.**

If we experience delays in meeting our development goals, our products exhibit technical defects, or if we are unable to meet cost or performance goals, including power output, useful life and reliability, the profitable commercialization of our products will be delayed. In this event, potential purchasers of our products may choose alternative technologies and any delays could allow potential competitors to gain market advantages. We cannot assure you that we will successfully meet our commercialization schedule in the future.

**We have not developed and produced certain products that we have agreed to sell to some of our customers, which may give such customers the right to terminate their agreements with us.**

We have not developed or produced certain products that are required by some of our sales and customer agreements. As of December 31, 2010, 78 of our backlog orders worth approximately $2.1 million of product revenues have not been developed or produced. There can be no assurance that we will complete development of products meeting specifications required by our sales and customer agreements and deliver them on schedule. Pursuant to certain agreements, the customers have the right to provide notice to us if, in their good faith judgment, we have materially deviated from the agreement. Should a customer provide such notice, and we cannot mutually agree to a modification to the agreement, then the customer may have the right to terminate the agreement, which could adversely affect our future business.

**We may never complete the research and development of certain commercially viable products, which may adversely affect our revenue, profitability and result in possible warranty claims.**

Other than certain products within our GenCore, GenSys and GenDrive product families, which we believe to be commercially viable at this time, we do not know when or whether we will successfully complete research and development of other commercially viable products. If we are unable to develop additional commercially viable products, we may not be able to generate sufficient revenue to become profitable. The profitable commercialization of our products depends on our ability to reduce the costs of our components and subsystems, and we cannot assure you that we will be able to sufficiently reduce these costs. In addition, the profitable commercialization of our products requires achievement and verification of their overall reliability, efficiency and safety targets, and we cannot assure you that we will be able to develop, acquire or license the technology necessary to achieve these targets. We must complete additional research and development to fill out product portfolios and deliver enhanced functionality and reliability in order to manufacture additional commercially viable products in commercial quantities. In addition, while we are conducting tests to predict the overall life of our products, we may not have run our products over their projected useful life prior to large-scale commercialization. As a result, we cannot be sure that our products will last as long as predicted, resulting in possible warranty claims and commercial failures.

**Failure of our customer demonstrations could negatively impact demand for our products.**

We are currently conducting demonstrations with a number of our customers, and we plan to conduct additional demonstrations in the future. We may encounter problems and delays during these demonstrations for a number of reasons, including the failure of our technology or the technology of third parties, as well as our failure to maintain and service our products properly. Many of these potential problems and delays are beyond our control. Any problem or perceived problem with our demonstrations could materially harm our reputation and impair market acceptance of, and demand for, our products.

### Product liability or defects could negatively impact our results of operations.

Any liability for damages resulting from malfunctions or design defects could be substantial and could materially adversely affect our business, financial condition, results of operations and prospects. In addition, a well-publicized actual or perceived problem could adversely affect the market’s perception of our products resulting in a decline in demand for our products and could divert the attention of our management, which may materially and adversely affect our business, financial condition, results of operations and prospects.

**Our GenDrive products face intense competition and we may be unable to compete successfully.**

The markets for energy products are intensely competitive. Some of our competitors in the fuel cell sector and in incumbent technologies are much larger than we are and may have the manufacturing, marketing and sales capabilities to complete research, development and commercialization of profitable, commercially viable products more quickly and effectively than we can. There are many companies engaged in all areas of traditional and alternative energy generation in the United States, Canada and abroad, including, among others, major electric, oil, chemical, natural gas, battery, generator and specialized electronics firms, as well as universities, research institutions and foreign government-sponsored companies. These firms are engaged in forms of power generation such as solar and wind power, reciprocating engines and micro turbines, advanced battery technologies, as well as traditional grid-supplied electric power. Many of these entities have substantially greater financial, research and development, manufacturing and marketing resources than we do.

**Alternatives to our GenDrive products or improvements to traditional energy technologies could make our products less attractive or render them obsolete.**

Our products are among a number of alternative energy products being developed. A significant amount of public and private funding is currently directed toward development of micro turbines, solar power, wind power, advanced batteries and generator sets, fast charged technologies and other types of fuel cell technologies. Improvements are also being made to the existing electric transmission system and battery based systems. Technological advances in alternative energy products, improvements in the electric power grid, battery systems or other fuel cell technologies may make our products less attractive or render them obsolete.

**We depend on only a few customers for the majority of our revenues and the loss of any one or more of these customers, or a significant loss, reduction or rescheduling of orders from any of these customers, would have a material adverse effect on our business, financial condition and results of operations.**

We sell most of our products to a small number of customers, and while we are continually seeking to expand our customer base, we expect this will continue for the next several years. As of December 31, 2010, five of our customers comprised approximately 83.6% of the total accounts receivable balance, with each customer individually representing 33.7%, 33.5%, 6.7%, 6.0% and 3.6% of that amount. At December 31, 2010, contracts with two customers and one federal government agency each accounted for 10% or more of total consolidated revenues. Any decline in business with these small numbers of customers could have an adverse impact on our business, financial condition and results of operations. Our future success is dependent upon the continued purchases of our products by a small number of customers. Any fluctuations in demand from such customers or other customers may negatively impact our business, financial condition and results of operations. If we are unable to broaden our customer base and expand relationships with potential customers, our business will continue to be impacted by unanticipated demand fluctuations due to our dependence on a small number of customers. Unanticipated demand fluctuations can have a negative impact on our revenues and business, and an adverse effect on our business, financial condition and results of operations. In addition, our dependence on a small number of major customers exposes us to numerous other risks, including: (i) a slowdown or delay in a customer’s deployment of our products could significantly reduce demand for our products; (ii) reductions in a single customer’s forecasts and demand could result in excess inventories; (iii) the current economic crisis could negatively affect one or more of our major customers and cause them to significantly reduce operations, or file for bankruptcy; (iv) consolidation of customers can reduce demand as well as increase pricing pressure on our products due to increased purchasing leverage; (v) each of our customers has significant purchasing leverage over us to require changes in sales terms including pricing, payment terms and product delivery schedules; and (vi) concentration of accounts receivable credit risk, which could have a material adverse effect on our liquidity and financial condition if one of our major customers declared bankruptcy or delayed payment of their receivables.

**The raw materials on which our products rely may not be readily available or available on a cost-effective basis.**

Platinum is a key material in our PEM fuel cells. Platinum is a scarce natural resource and we are dependent upon a sufficient supply of this commodity. Any shortages could adversely affect our ability to produce commercially viable fuel cell systems and significantly raise our cost of producing our fuel cell systems.

**Our future plans could be harmed if we are unable to attract or retain key personnel.**

We have attracted a highly skilled management team and specialized workforce, including scientists, engineers, researchers, manufacturing, marketing and sales professionals. Our future success will depend, in part, on our ability to attract and retain qualified management and technical personnel. We do not know whether we will be successful in hiring or retaining qualified personnel. Our inability to hire qualified personnel on a timely basis, or the departure of key employees, could materially and adversely affect our development and profitable commercialization plans and, therefore, our business prospects, results of operations and financial condition.

**Provisions in our charter documents and Delaware law may prevent or delay an acquisition of us, which could decrease the value of our common stock.**

Our certificate of incorporation, our bylaws, and Delaware corporate law contain provisions that could make it harder for a third party to acquire us without the consent of our board of directors. These provisions include those that: (i) authorize the issuance of up to 5,000,000 shares of preferred stock in one or more series without a stockholder vote; (ii) limit stockholders’ ability to call special meetings; (iii) establish advance notice requirements for nominations for election to our board of directors or for proposing matters that can be acted on by stockholders at stockholder meetings; and (iv) provide for staggered terms for our directors. We have a shareholders rights plan that may be triggered if a person or group of affiliated or associated persons acquires beneficial ownership of 15% or more of the outstanding shares of our common stock. In addition, in certain circumstances, Delaware law also imposes restrictions on mergers and other business combinations between us and any holder of 15% or more of our outstanding common stock.

**Adverse changes in general economic conditions in the United States or any of the major countries in which we do business could adversely affect our operating results.**

As a global company, we are subject to the risks arising from adverse changes in global economic conditions. For example, as a result of the ongoing financial crisis in the credit markets, softness in the housing markets, difficulties in the financial services sector and continuing economic uncertainties, the direction and relative strength of the U.S. economy has become increasingly uncertain. If economic growth in the United States and other countries slows or recedes, our current or potential customers may delay or reduce technology purchases. This could result in reductions in sales of our products, longer sales cycles, slower adoption of new technologies and increased price competition, which could materially and adversely affect our business, results of operations and financial condition.

**Our business may become subject to future government regulation, which may impact our ability to market our products and costs and price of our products.**

Our products are subject to certain federal, local, and non-U.S. laws and regulations, including, for example, state and local ordinances relating to building codes, public safety, electrical and gas pipeline connections, hydrogen transportation and siting and related matters. See “Business—Government Regulations” for additional information. Further, as products are introduced into the market commercially, governments may impose new regulations. We do not know the extent to which any such regulations may impact our ability to distribute, install and service our products. Any regulation of our products, whether at the federal, state, local or foreign level, including any regulations relating to installation and servicing of our products, may increase our costs and the price of our products.

### Our products use flammable fuels that are inherently dangerous substances.

Our fuel cell systems use natural gas and hydrogen gas in catalytic reactions. While our products do not use this fuel in a combustion process, natural gas and hydrogen gas are flammable fuels that could leak in a home or business and combust if ignited by another source. Further, while we are not aware of any accidents involving our products, any such accidents involving our products or other products using similar flammable fuels could materially suppress demand for, or heighten regulatory scrutiny of, our products.

**We may not be able to protect important intellectual property and we could incur substantial costs defending against claims that our products infringe on the proprietary rights of others.**

PEM fuel cell technology was first developed in the 1950s, and fuel processing technology has been practiced on a large scale in the petrochemical industry for decades. Accordingly, we do not believe that we can establish a significant proprietary position in the fundamental component technologies in these areas. However, our ability to compete effectively will depend, in part, on our ability to protect our proprietary system-level technologies, systems designs and manufacturing processes. We rely on patents, trademarks, and other policies and procedures related to confidentiality to protect our intellectual property. However, some of our intellectual property is not covered by any patent or patent application. Moreover, we do not know whether any of our pending patent applications will issue or, in the case of patents issued or to be issued, that the claims allowed are or will be sufficiently broad to protect our technology or processes. Even if all of our patent applications are issued and are sufficiently broad, our patents may be challenged or invalidated. We could incur substantial costs in prosecuting or defending patent infringement suits or otherwise protecting our intellectual property rights. While we have attempted to safeguard and maintain our proprietary rights, we do not know whether we have been or will be completely successful in doing so. Moreover, patent applications filed in foreign countries may be subject to laws, rules and procedures that are substantially different from those of the United States, and any resulting foreign patents may be difficult and expensive to enforce. In addition, we do not know whether the U.S. Patent & Trademark Office will grant federal registrations based on our pending trademark applications. Even if federal registrations are granted to us, our trademark rights may be challenged. It is also possible that our competitors or others will adopt trademarks similar to ours, thus impeding our ability to build brand identity and possibly leading to customer confusion. We could incur substantial costs in prosecuting or defending trademark infringement suits.

Further, our competitors may independently develop or patent technologies or processes that are substantially equivalent or superior to ours. If we are found to be infringing third party patents, we could be required to pay substantial royalties and/or damages, and we do not know whether we will be able to obtain licenses to use such patents on acceptable terms, if at all. Failure to obtain needed licenses could delay or prevent the development, manufacture or sale of our products, and could necessitate the expenditure of significant resources to develop or acquire non-infringing intellectual property.

**Asserting, defending and maintaining our intellectual property rights could be difficult and costly and failure to do so may diminish our ability to compete effectively and may harm our operating results.**

We may need to pursue lawsuits or legal action in the future to enforce our intellectual property rights, to protect our trade secrets and domain names, and to determine the validity and scope of the proprietary rights of others. If third parties prepare and file applications for trademarks used or registered by us, we may oppose those applications and be required to participate in proceedings to determine the priority of rights to the trademark. Similarly, competitors may have filed applications for patents, may have received patents and may obtain additional patents and proprietary rights relating to products or technology that block or compete with ours. We may have to participate in interference proceedings to determine the priority of invention and the right to a patent for the technology. Litigation and interference proceedings, even if they are successful, are expensive to pursue and time consuming, and we could use a substantial amount of our financial resources in either case.

**We rely, in part, on contractual provisions to protect our trade secrets and proprietary knowledge, the adequacy of which may not be sufficient.**

Confidentiality agreements to which we are party may be breached, and we may not have adequate remedies for any breach. Our trade secrets may also be known without breach of such agreements or may be independently developed by competitors. Our inability to maintain the proprietary nature of our technology and processes could allow our competitors to limit or eliminate any competitive advantages we may have.

**Our government contracts could restrict our ability to profitably commercialize our technology.**

Some of our technology has been developed with state and federal government funding in the United States, Canada and other countries. The United States and Canadian governments have a non-exclusive, royalty-free, irrevocable world-wide license to practice or have practiced some of our technology developed under contracts funded by the respective government. In some cases, government agencies in the United States or Canada can require us to obtain or produce components for our systems from sources located in the United States or Canada, respectively, rather than foreign countries. Our contracts with government agencies are also subject to the risk of termination at the convenience of the contracting agency, potential disclosure of our confidential information to third parties and the exercise of “march-in” rights by the government. March-in rights refer to the right of the United States or Canadian governments or government agency to license to others any technology developed under contracts funded by the government if the contractor fails to continue to develop the technology. The implementation of restrictions on our sourcing of components or the exercise of march-in rights could harm our business, prospects, results of operations and financial condition. In addition, under the Freedom of Information Act, any documents that we have submitted to the government or to a contractor under a government funding arrangement are subject to public disclosure that could compromise our intellectual property rights unless such documents are exempted as trade secrets or as confidential information and treated accordingly by such government agencies.

## Properties

As filed, 702 characters.

Our principal offices are located in Latham, New York. At our 36-acre campus, we own a 56,000 square foot research and development center, a 32,000 square foot office building and a 50,000 square foot manufacturing facility and we believe that these facilities are sufficient to accommodate our anticipated production volumes for at least the next two years. We also lease a 25,000 square foot warehouse facility in Latham, New York.

In connection with the acquisitions of Cellex and General Hydrogen, we also lease one facility in Richmond, British Columbia with square footage of 33,200 square feet. The Company no longer occupies this space but has sublease agreements for the total square footage.

## Legal proceedings

As filed, 2,251 characters.

In July 2008, Soroof Trading Development Company Ltd. (Soroof) filed a demand for arbitration against GE Fuel Cell Systems, LLC (GEFCS) claiming breach of a distributor agreement and seeking damages of $3 million. Prior to GEFCS’ dissolution in 2006, the Company held a 40% membership interest and GE Microgen, Inc. (GEM) held a 60% membership interest in GEFCS. In January 2010, Soroof requested, and GEM and Plug Power Inc. agreed, that the arbitration proceeding be administratively closed pending final resolution of the matter in United States District Court, Southern District of New York. On January 22, 2010, Soroof filed a complaint in United States District Court, Southern District of New York naming, among others, Plug Power Inc., GEFCS, and GEM as defendants, and the lawsuit is pending. Accordingly, while there continues to be on-going discussions between the parties, we believe that it is too early to determine (i) that there is likely exposure to an adverse outcome and (ii) whether or not the probability of an adverse outcome is more than remote. The Company, GEFCS, GEM and General Electric Company (GE) are party to an agreement under which the Company agreed to indemnify such parties for up to $1 million of certain losses related to the Soroof distributor agreement. GE has made a claim for indemnification against the Company under this agreement for all losses it may suffer as a result of the Soroof dispute.

On September 29, 2010, Aspen Technology, Inc. filed a complaint against Plug Power Inc. in the Suffolk County, Massachusetts Superior Court, alleging that the Company breached a software license and service agreement due to nonpayment. The complaint seeks monetary damages of approximately $745,000, which is allegedly the remaining license fee payable by the Company under the agreement, plus attorneys' fees and interest. On January 31, 2011, Plug Power Inc. and Aspen Technology executed a confidential settlement agreement wherein Aspen Technology and Plug Power mutually released the other from all claims, debts, demands, causes of action and liabilities that were or could have been asserted in the action. The Suffolk County Superior Court formally dismissed the case with prejudice on February 4, 2011.

## Management's discussion and analysis

As filed, 62,023 characters.

The discussion contained in this Form 10-K contains “forward-looking statements,” within the meaning of Section 27A of the Securities Act and Section 21E of the Exchange Act, that involve risks and uncertainties. Our actual results could differ materially from those discussed in this Form 10-K. In evaluating these statements, you should review Part I, Item 1A: Risk Factors and our Consolidated Financial Statements and notes thereto included in Part II, Item 8: Financial Statements and Supplementary Data of this Form 10-K.

### Overview

Plug Power Inc., or the Company, is a leading provider of alternative energy technology focused on the design, development, commercialization and manufacture of fuel cell systems for the industrial off-road (forklift or material handling) market. Plug Power has also developed products for the back-up and stationary power markets worldwide. Effective April 1, 2010, the Company was no longer considered a development stage enterprise since principal operations began to provide more than insignificant revenues as the Company received orders from repeat customers, increased its customer base and had a significant backlog. Prior to April 1, 2010, the Company was considered a development stage enterprise because substantially all of our resources and efforts were aimed at the discovery of new knowledge that could lead to significant improvement in fuel cell reliability and durability and the establishment, expansion and stability of markets for our products. The Company continues to experience significant net outflows of cash from operations and devotes significant efforts towards financial planning in order to forecast future cash spending and the ability to continue product research and development activities and expansion of markets for its products. We continue to leverage our unique fuel cell application and integration knowledge to identify commercially viable markets for which we can design and develop innovative systems and customer solutions that provide superior value, ease-of-use and environmental design. We have made significant progress in the material handling market and believe we have developed reliable products for our end customers.

Plug Power has successfully introduced new GenDrive product offerings to augment our product suite and allow full site conversions. We have sold, on commercial terms, product offerings to target customers including Walmart, FedEx Freight, Coca-Cola Bottling Co., Sysco Foods and Central Grocers. Our sales to Central Grocers and Sysco Foods involve “greenfield” conversion sites. Greenfield sites offer the potential for the greatest financial benefits to our customers by eliminating the need for customers to make capital investments in batteries and the associated chargers, storage and changing systems.

We have experienced and continue to experience negative cash flows from operations and we expect to continue to incur net losses in the foreseeable future. Accordingly, in 2010, we restructured and consolidated our operations to focus on the GenDrive business. Please see “—Recent Developments” below for additional information regarding the restructuring. This restructuring is expected to decrease our operating expenses by $12 to $15 million annually starting in 2011.

As of December 31, 2010, we had approximately $11.0 million and $10.4 million of cash and cash equivalents and available-for-sale securities, respectively, to fund our future operations. We believe that our current cash, cash equivalents, available-for-sale securities balances and cash generated from future sales will provide sufficient liquidity to fund operations into or through the first quarter of 2012. This projection is based on our current expectations regarding product sales, cost structure, cash burn rate and operating assumptions (including those specified in the May 2010 restructuring plan described below), which do not include any funding from external sources of financing. Our future liquidity and capital requirements will depend upon numerous factors, including those identified in “Risk Factors— We expect we will need to raise additional capital to fund our operations beyond the first quarter of 2012 and such capital may not be available to us, in which case we may have to reduce and/or cease our operations.” As a result, we can provide no assurance that we will be able to fund our operations beyond 2011 without external financing. If we are unable to obtain additional capital prior to the end of 2011, we may not be able to sustain our future operations beyond the first quarter of 2012 and may be required to delay, reduce and/or cease our operations and/or seek bankruptcy protection. We cannot assure you that any necessary additional financing will be available on terms favorable to us, or at all. Given the difficult current economic environment, we believe that it could be difficult to raise additional funds and there can be no assurance as to the availability of additional financing or the terms upon which additional financing may be available. Additionally, even if we raise sufficient capital through equity or debt financing, strategic alliances or otherwise, there can be no assurances that the revenue or capital infusion will be sufficient to enable us to develop our business to a level where it will be profitable or generate positive cash flow.

### Recent Developments

*OGK-3.* On March 29, 2011, OJSC INTER RAO UES filed a Form 3 with the SEC reporting that on March 18, 2011 INTER RAO UES indirectly acquired a 74.7% interest in OGK-3. OGK-3 owns approximately 33.7% of our outstanding common stock. In the Form 3 INTER RAO UES also reported that, as of March 29, 2011, it directly owned 81.9% of OGK-3.

*Service and Supply Agreement*. On February 2, 2010, the Company signed a service and supply agreement with the Raymond Corporation (Raymond), a global provider of material handling solutions that improve space utilization and productivity, with lower cost of operation and greater operator acceptance. Raymond is now an independent distributor for the sale, rental and lease of Plug Power GenDrive fuel cell units in North America. As an authorized service provider, Raymond also will provide warranty and maintenance service on GenDrive products through its North American Sales and Service Center Network. In addition, Raymond is a GenDrive authorized distributor of service parts.

On July 15, 2010, the Company and Ballard Power Systems Inc. (Ballard) announced an extension to their existing supply agreement through 2014. Ballard will remain the exclusive supplier of fuel cell stacks for the Company’s full suite of GenDrive products. In addition, the Company will become the exclusive systems integrator for Ballard’s fuel cell stack into solutions addressing the material handling market in North America. The previous agreement was due to expire December 31, 2010.

*Commercialization Agreement*. On February 4, 2010, the Company signed a commercialization agreement with CITIC GuoAn Mengguli Power Science & Technology Co., Ltd. (MGL), a leader in advanced lithium-ion batteries and materials, for the joint marketing and sales of their co-developed high power lithium-ion battery systems into automotive applications. In our on-going effort to improve performance and reduce cost of its GenDrive products for the material handling market, we began the development of a lithium based hybrid battery system to replace our nickel-metal hydride hybrid batteries. Based on the successful introduction of the lithium battery systems into GenDrive products, it became evident that other adjacent markets could also benefit from this sophisticated and configurable technology. Through this agreement, Plug Power and MGL will first introduce their products to the Chinese automotive industry, where “New Energy” sponsored programs are supporting the deployment of at least 500,000 hybrid and pure electric vehicles over the next four years.

*Restructuring*. On May 25, 2010, the Company adopted a restructuring plan to focus and align the Company on its GenDrive business. As part of this plan, the Company has consolidated all operations to its Latham, New York headquarters and as such, the Company’s operating expenses are expected to decrease by $12 to $15 million annually, preserving necessary capital to help accelerate market adoption in the material handling market. The Company recorded restructuring charges in the amount of $8,096,838 within selling, general and administrative expenses in the consolidated statement of operations for 2010 in relation to this restructuring. At December 31, 2010, $687,696 remains in accrued expenses on the consolidated balance sheets.

*Licensing Agreement*. Effective October 26, 2010, the Company announced that it had licensed the intellectual property relating to its stationary power products, GenCore and GenSys, to IdaTech plc on a non-exclusive basis. Plug Power maintains ownership of, and the right to use, the patents and other intellectual property licensed to IdeaTech. As part of the transaction, Plug Power also sold inventory, equipment and certain other assets related to its stationary power business. Total consideration for the licensing and assets was $5 million and was received during October 2010. The consideration is subject to reduction by a maximum of $1 million in the event that the Company does not deliver certain of the assets sold. As of December 31, 2010, $1.0 million is included in assets held for sale in the consolidated balance sheets.

*Departure of Directors or Principal Officers*. On August 27, 2010, Mark A. Sperry stepped down from his positions as Senior Vice President of the Company and as General Manager of the Company's Continuous Power Division. The Company and Mr. Sperry have entered into an agreement under which Mr. Sperry will provide consulting services to the Company for a period of up to twelve (12) months. The Company’s maximum obligation under the consulting agreement shall not exceed $100,000.

On October 13, 2010, Jeffrey M. Drazan resigned as a member of the Board of Directors of the Company.

*Debt and Lease Arrangement.* In March, 2009, the Company signed a $1.7 million promissory note issued by Key Equipment Finance Inc. (Key Equipment) for the purpose of financing GenDrive products leased to Central Grocers. On April 1, 2009, the Company began leasing this same equipment to its customer, Central Grocers. In July 2009, the Company signed a letter of credit with Key Bank in the amount of $525,000. The standby letter of credit is required by the agreement negotiated between Air Products and Chemicals, Inc. (Air Products) and the Company to supply hydrogen infrastructure and hydrogen to Central Grocers at their distribution center. The standby letter of credit is collateralized by cash held in a restricted account.

In December 2010, the Company assigned all of its rights, title and interest in the lease to Somerset Capital Group, Ltd. (Somerset), but the Company will continue to provide maintenance in accordance with the lease agreement. In conjunction with the lease assignment, the Key Equipment promissory note was completely paid off by the Company and the collateralized cash was released to the Company. The Company sold all of the equipment under the lease to Somerset.

During 2010, the Company entered into the second phase of leased assets with Central Grocers and assigned all of its rights, title and interest in the second phase lease to Somerset, but the Company will continue to provide maintenance in accordance with the lease agreement. The Company sold all of the equipment under the second phase lease to Somerset.

In October 2009, the Company entered into a 15 month financing arrangement for an electrolyzer.

See Note 8 (Debt and Lease Arrangement) of the Consolidated Financial Statements for more detail.

### Results of Operations

*Product and service revenue.* Effective April 1, 2010, the Company adopted ASU No. 2009-13 on Topic 605, Revenue Recognition– Multiple Deliverable Revenue Arrangements retroactive to January 1, 2010. ASU No. 2009-13 amends the FASB ASC to eliminate the residual method of allocation for multiple-deliverable revenue arrangements, and requires that arrangement consideration be allocated at the inception of an arrangement to all deliverables using the relative selling price method. As a result of implementing ASU No. 2009-13, we recognized approximately $10.5 million during the year ended December 31, 2010 that would have been deferred under the Company’s previous guidance for multiple-deliverable revenue arrangements. The Company anticipates that the effect of the adoption of this guidance on subsequent periods will be primarily based on the arrangements entered into and the timing of shipment of deliverables. See Note 19, Multiple-Deliverable Revenue Arrangements of the Consolidated Financial Statements, Part II, Item 8 of this Annual Report on Form 10-K for further discussion of our multiple-deliverable revenue arrangements.

For all product and service revenue transactions entered into prior to the implementation of ASU No. 2009-13, the Company will continue to defer the recognition of product and service revenue and recognize revenue on a straight-line basis as the continued service, maintenance and other support obligations expire, which are generally for periods of twelve to thirty months, or which can extend over multiple years. While contract terms for those transactions generally required payment shortly after shipment or delivery and installation of the fuel cell system and were not contingent on the achievement of specific milestones or other substantive performance, the multiple-element revenue obligations within our contractual arrangements were generally not accounted for separately based on our limited experience and lack of evidence of fair value of the undelivered components.

Product and service revenue for the year ended December 31, 2010 increased $10.9 million, or 225.7%, to $15.7 million from $4.8 million for the year ended December 31, 2009. Approximately $10.5 million of the increase is related to the adoption of ASU No. 2009-13 as well as an increase in current period system shipments partially offset by a decrease in revenue from prior period system shipments that have now been fully accreted into income. A portion of the non-deferred revenue represents revenue associated with replacement parts or services not covered by service agreements or other similar types of sales where the Company has no continuing obligation after the parts are shipped or delivered or after services are rendered.

In the product and service revenue category, during the year ended December 31, 2010, we shipped 660 fuel cell systems (562 are related to sales to end customers and 98 were delivered to Central Grocers under a lease arrangement whereby Plug Power retained title and ownership of the equipment until it subsequently sold the leases) as compared to 257 fuel cell systems (117 were related to sales to end customers and 140 were delivered to Central Grocers under a lease arrangement whereby Plug Power retained title and ownership of the equipment until it subsequently sold the leases) shipped during the year ended December 31, 2009. In the year ended December 31, 2010, we recognized approximately $13.0 million of revenue for products shipped or delivered or services rendered in the year ended December 31, 2010 as compared to approximately $1.7 million of revenue recognized in the year ended December 31, 2009. Additionally, in the year ended December 31, 2010, we recognized approximately $2.7 million of product and services revenue from fuel cell shipments made prior to 2010, whereas in the year ended December 31, 2009, we recognized approximately $3.1 million of product and service revenue from fuel cell shipments made prior to 2009.

Product and service revenue for the year ended December 31, 2009 increased $165,000 or 3.5%, to $4.8 million from $4.7 million for the year ended December 31, 2008. The increase is primarily related to an increase in non-deferred revenue partially offset by decreased system shipments and the revenue recognized on those shipments. The non-deferred revenue represents revenue associated with replacement parts or services not covered by service agreements or other similar types of sales where the Company has no continuing obligation after the parts are shipped or delivered or after services are rendered.

In the product and service revenue category, during the year ended December 31, 2009, we shipped 257 fuel cell systems (117 are related to sales to end customers and 140 were delivered to Central Grocers under a lease arrangement whereby Plug Power retains title and ownership of the equipment) as compared to 273 fuel cell systems during the year ended December 31, 2008. In the year ended December 31, 2009, we recognized $1.7 million of revenue for products shipped or delivered or services rendered in the year ended December 31, 2009, which includes $1.4 million of non-deferred revenue as compared to $2.3 million of revenue recognized in the year ended December 31, 2008 for products shipped or delivered or services rendered in the year ended December 31, 2008, which includes $1.1 million of non-deferred revenue. Additionally, in the year ended December 31, 2009, we recognized approximately $3.1 million of product and services revenue originally deferred at December 31, 2008, whereas in the year ended December 31, 2008, we recognized $2.4 million of revenue originally deferred at December 31, 2007.

*Research and development contract revenue.* Research and development contract revenue primarily relates to cost reimbursement research and development contracts associated with the development of PEM fuel cell technology. We generally share in the cost of these programs with our cost-sharing percentages generally ranging from 30% to 50% of total project costs. Revenue from time and material contracts is recognized on the basis of hours expended plus other reimbursable contract costs incurred during the period. Revenue from fixed fee contracts is recognized on the basis of percentage of completion. We expect to continue certain research and development contract work that is directly related to our current product development efforts.

Research and development contract revenue for the year ended December 31, 2010 decreased $3.9 million, or 51.8%, to $3.6 million from $7.5 million for the year ended December 31, 2009. The decrease is primarily related to having fewer active contracts in 2010.

Research and development contract revenue for year ended December 31, 2009 decreased $5.8 million, or 43.6%, to $7.5 million from $13.2 million for the year ended December 31, 2008. The decrease is primarily related to the completion and near completion of funded projects in both the United States and Canada as well as a delay in the timing of deliverables in new programs. In the research and development contract revenue category, during the twelve months ended December 31, 2009 we shipped 45 GenDrive fuel cell systems that were previously funded under various government projects.

*Cost of product and service revenue.* Cost of product and service revenue includes the direct material and labor cost as well as an allocation of overhead costs that relate to the manufacturing of products we sell. In addition, cost of product and service revenue also includes the labor and material costs incurred for product maintenance, replacement parts and service under our contractual obligations.

Cost of product and service revenue for the year ended December 31, 2010 increased $15.9 million, or 218.9%, to $23.1 million from $7.2 million for the year ended December 31, 2009. The increase is primarily related to increased product and service fuel cell system shipments to end customers. There were 660 fuel cell system shipments for the year ended December 31, 2010, as compared to 257 for the year ended December 31, 2009, which includes 98 and 140 fuel cells, respectively, that were being accounted for under a lease arrangement until the sale of the leases. Therefore, the cost recognized on those shipments was recorded on the consolidated balance sheets as investment in leased property and was being depreciated over the lease term. The increase also includes an allocation of overhead costs charged to cost of product and service revenue as a result of increased sales and a focus on commercial production of our product. Accordingly, some of these costs were included in research and development expense prior to the third quarter of 2010, due to the Company’s focus on research and development at that time.

Cost of product and service revenue for the year ended December 31, 2009 decreased $4.2 million, or 36.7%, to $7.2 million from $11.4 million for the year ended December 31, 2008. The decrease is attributable to $2.3 million in inventory write-offs associated with the corporate restructuring plan announced in December 2008 and a decrease in product and service fuel cell system shipments from the prior year. There were 257 fuel cell system shipments for the year ended December 31, 2009, as compared to 273 for the year ended December 31, 2008. Further contributing to the decrease in 2009, 140 of the 257 fuel cell system shipments are being accounted for under a lease arrangement which commenced in the second quarter of 2009. Therefore, the cost recognized on those 140 shipments consists of depreciation of approximately $206,000 in the year ended December 31, 2009.

*Cost of research and development contract revenue*. Cost of research and development contract revenue includes costs associated with research and development contracts including: cash and non-cash compensation and benefits for engineering and related support staff, fees paid to outside suppliers for subcontracted components and services, fees paid to consultants for services provided, materials and supplies used and other directly allocable general overhead costs allocated to specific research and development contracts.

Cost of research and development contract revenue for the year ended December 31, 2010 decreased $6.1 million, or 48.8%, to $6.4 million from $12.4 million for the year ended December 31, 2009. This decrease is primarily related to having fewer active contracts in 2010.

Cost of research and development contract revenue for the year ended December 31, 2009 decreased $9.1 million, or 42.2%, to $12.4 million from to $21.5 million in 2008. This decrease reflects a reduced effort on funded contracts due to the completion or near completion of several major contracts in the United States and Canada as well as a delay in the timing of deliverables for new programs.

*Research and development expense.* Research and development expense includes: materials to build development and prototype units, cash and non-cash compensation and benefits for the engineering and related staff, expenses for contract engineers, fees paid to outside suppliers for subcontracted components and services, fees paid to consultants for services provided, materials and supplies consumed, facility related costs such as computer and network services, and other general overhead costs associated with our research and development activities.

Research and development expense for the year ended December 31, 2010 decreased $3.4 million, or 21.0%, to $12.9 million from $16.3 million for the year ended December 31, 2009. This decrease was primarily a result of the wind-down of our operations in Plug Power Energy India Private Limited, Plug Power Canada as well as our Plug Power Holland organization. The decrease was also coupled with our allocation of overhead costs charged to cost of product and service revenue as a result of increased sales and a focus on commercial production of our product. Accordingly, some of these costs were included in research and development expense prior to this quarter, due to the Company’s focus on research and development at that time.

Research and development expense for the year ended December 31, 2009 decreased $18.7 million, or 53.3%, to $16.3 million from to $35.0 million in 2008. This decrease was a direct result of the corporate restructuring plans announced in June and December of 2008, which included a reduced workforce and a reduction in non-strategic research and development projects.

*Selling, general and administrative expenses.* Selling, general and administrative expenses includes cash and non-cash compensation, benefits and related costs in support of our general corporate functions, including general management, finance and accounting, human resources, selling and marketing, information technology and legal services.

Selling, general and administrative expenses for the year ended December 31, 2010 increased $10.1 million, or 65.8%, to $25.6 million from $15.4 million for the year ended December 31, 2009. This increase was primarily a result of the corporate restructuring plan announced in May 2010, which totaled $8.1 million and a $2.1 million write-off of assets from Plug Power Canada Inc.

Selling, general and administrative expenses for the year ended December 31, 2009 decreased $12.9 million, or 45.6%, to $15.4 million compared to $28.3 million in 2008. This decrease was a direct result of the corporate restructuring plans announced in June and December of 2008.

*Gain on Sale of Assets.* Effective October 26, 2010, the Company licensed the intellectual property relating to its stationary power products, GenCore and GenSys, to IdaTech plc on a non-exclusive basis. Plug Power maintains ownership of, and the right to use, the patents and other intellectual property licensed to IdaTech. As part of the transaction, Plug Power also sold inventory, equipment and certain other assets related to its stationary power business. Total consideration for the licensing and assets was $5 million and was received during October 2010. This consideration was net against costs incurred to close the transaction.

*Amortization of intangible assets.* Amortization of intangible assets represents the amortization associated with the Company’s acquired identifiable intangible assets from Plug Power Canada Inc., including acquired technology and customer relationships, which are being amortized over eight years.

Amortization of intangible assets increased to $2.3 million for the year ended December 31, 2010, compared to $2.1 million for the year ended December 31, 2009. The increase is related to foreign currency fluctuations.

Amortization of intangible assets decreased to $2.1 million for the year ended December 31, 2009, compared to $2.2 million for the year ended December 31, 2008. The decrease is related to foreign currency fluctuations.

*Interest and other income and net realized gains from available-for-sale securities.* Interest and other income and net realized gains from available-for-sale securities consists primarily of interest earned on our cash, cash equivalents, available-for-sale and trading securities, other income, and the net realized gain/loss from the sale of available-for-sale securities.

Interest and other income and net realized gains from available-for-sale securities decreased to $1.1 million for the year ended December 31, 2010 from $1.7 million for the year ended December 31, 2009. This decrease is primarily related to lower cash balances coupled with lower yields on our investments due to a declining interest rate environment offset by increased rental income received from our Latham facility. Interest income on trading securities and available-for-sale securities for the year ended December 31, 2010 was approximately $352,000 and $179,000, respectively. Interest income on trading securities and available-for-sale securities for the year ended December 31, 2009 was approximately $906,000 and $307,000, respectively.

Interest and other income and net realized gains from available-for-sale securities decreased to $1.7 million for the year ended December 31, 2009 from $5.1 million for the year ended December 31, 2008. This decrease is primarily related to lower cash balances coupled with lower yields on our investments due to a declining rate environment. Total net realized gains/losses from the sale of available-for-sale securities was $0 for the year ended December 31, 2009 and a net gain of approximately $389,000 for the year ended December 31, 2008. Interest income on trading securities and available-for-sale securities for the year ended December 31, 2009 was approximately $906,000 and $307,000, respectively. Interest income on trading securities and available-for-sale securities for the year ended December 31, 2008 was approximately $1.9 million and $1.5 million, respectively. Also included in the year ended December 31, 2008 is a $1.2 million gain relating to the termination of Technology Partnerships Canada (TPC) agreements as discussed in Note 10 (Repayable Government Assistance) of the Notes to Consolidated Financial Statements.

*Gain on auction rate debt securities repurchase agreement.* In December 2008, the Company entered into a Repurchase Agreement with the third-party lender such that the Company may require the third-party lender to repurchase the auction rate debt securities pledged as collateral for the Credit Line Agreement, at their par value, from June 30, 2010 through July 2, 2012. As a result of the Repurchase Agreement entered into with a third party lender in December 2008, the Company reclassified the auction rate debt securities from available-for-sale securities to trading securities. The Company elected to record this item at its fair value in accordance with FASB ASC No. 825-10-25, Fair Value Option. The third-party lender repurchased the securities on July 1, 2010 in accordance with the Repurchase Agreement. The corresponding Credit Line Agreement was paid in full on July 1, 2010 in conjunction with the repurchase of the auction rate debt securities. The change in fair value of approximately $6.0 million and $4.2 million during the years ended December 31, 2010 and 2009, respectively was recorded as a loss in the consolidated statements of operations which is offset by the change in fair value of the auction rate debt securities held as collateral of approximately $6.0 million and $4.2 million that is recorded as a gain in the consolidated statements of operations for the years ended December 31, 2010 and 2009, respectively. At December 31, 2009, the fair value of this item was $6.0 million.

*Impairment loss on available-for-sale securities.* Due to the liquidity issues in the credit and capital markets, the market for auction rate debt securities began experiencing auction failures in February 2008, and there have been no successful auctions for the securities held in our portfolio since the failures began. Given the lack of liquidity in the market for auction rate debt securities, the Company concluded that the estimated fair value of these securities has become lower than the cost of these securities, and, based on an analysis of the other-than-temporary impairment factors, management has determined that this difference represents a decline in fair value that is other-than-temporary. Accordingly, the Company recorded an other-than-temporary impairment charge of $10.2 million in the twelve months ended December 31, 2008. There were no securities deemed other-than-temporarily impaired during 2010 and 2009.

*Interest and other expense.* Interest and other expense consists of interest on repayable government assistance amounts related to the activities of Cellex and General Hydrogen, interest related to the Credit Line Agreement and long term debt, and foreign currency exchange gain/(loss).

Interest and other expense for the year ended December 31, 2010 was approximately $487,000, compared to approximately $1.1 million for the year ended December 31, 2009. Interest expense related to the Credit Line Agreement was approximately $305,000 and $915,000, respectively, for the years ended December 31, 2010 and 2009, respectively.

Interest and other expense for the year ended December 31, 2009 was approximately $1.1 million, compared to approximately $401,000 for the year ended December 31, 2008. Interest expense related to the Credit Line Agreement was approximately $915,000 for the year ended December 31, 2009 and was not significant for the year ended December 31, 2008.

*Income taxes.* We did not report a benefit for federal and state income taxes in the Consolidated Financial Statements as the deferred tax asset generated from our net operating loss has been offset by a full valuation allowance because it is more likely than not that the tax benefits of the net operating loss carry forward will not be realized.

### Critical Accounting Estimates

The preparation of financial statements in conformity with generally accepted accounting principles and related disclosures requires management to make estimates and assumptions.

We believe that the following are our most critical accounting estimates and assumptions the Company must make in the preparation of its Consolidated Financial Statements and related disclosures:

*Revenue recognition:* Our fuel cell systems are designed to replace incumbent electric power technologies in material handling equipment. Our current product offerings are intended to offer complementary, quality power while demonstrating the market value of fuel cells as a preferred form of alternative distributed power generation. Subsequent enhancements to our initial product are expected to expand the market opportunity for fuel cells by lowering the installed cost, decreasing operating and maintenance costs, increasing efficiency and improving reliability.

Effective April 1, 2010, the Company adopted ASU No. 2009-13 on Topic 605, Revenue Recognition– Multiple Deliverable Revenue Arrangements retroactive to January 1, 2010. The objective of this ASU is to address the accounting for multiple-deliverable arrangements to enable vendors to account for products or services (deliverables) separately rather than as a combined unit. Vendors often provide multiple products or services to their customers. Those deliverables often are provided at different points in time or over different time periods. This ASU provides amendments to the criteria in Subtopic 605-25 for separating consideration in multiple-deliverable arrangements. The amendments in this ASU establish a selling price hierarchy for determining the selling price of a deliverable. The selling price used for each deliverable will be based on vendor-specific objective evidence (VSOE) if available, third-party evidence (TPE) if VSOE is not available, or estimated selling price (ESP) if neither VSOE nor TPE is available. The amendments in this ASU also replace the term fair value in the revenue allocation guidance with selling price to clarify that the allocation of revenue is based on entity-specific assumptions rather than assumptions of a marketplace participant and expands the disclosure requirements related to a vendor’s multiple-deliverable revenue arrangements. This ASU is effective prospectively for revenue arrangements entered into or materially modified in fiscal years beginning on or after June 15, 2010, however, the Company chose early adoption of this ASU.

The Company was previously prohibited from separating these multiple deliverables into individual units of accounting without VSOE of fair value or other TPE of fair value. This evidence was not available due to our limited experience and lack of evidence of fair value of the undelivered components of the sale. Without this level of evidence, the Company had to treat each sale as a single unit of accounting and defer the revenue recognition of each sale, recognizing revenue over a straight-line basis as the continued service, maintenance and other support obligations expired. Under ASU No. 2009-13, the requirement to have VSOE or TPE in order to recognize revenue has been modified, and it now allows the vendor to make its best estimate of the standalone selling price of deliverables when more objective evidence of selling price is not available.

For all product and service revenue transactions entered into prior to the implementation of ASU No. 2009-13, the Company will continue to defer the recognition of product and service revenue and recognize revenue on a straight-line basis as the continued service, maintenance and other support obligations expire, which are generally for periods of twelve to thirty months, or which extend over multiple years. While contract terms for those transactions generally required payment shortly after shipment or delivery and installation of the fuel cell system and were not contingent on the achievement of specific milestones or other substantive performance, the multiple-element revenue obligations within our contractual arrangements were generally not accounted for separately based on our limited experience and lack of evidence of fair value of the undelivered components.

See Note 19, Multiple-Deliverable Revenue Arrangements of the Consolidated Financial Statements, Part II, Item 8 of this Form 10-K for further discussion of our multiple-deliverable revenue arrangements.

The product and service revenue contracts entered into as of January 1, 2010 generally provide a one to two-year product warranty to customers from date of shipment. We currently estimate the costs of satisfying warranty claims based on an analysis of past experience and provide for future claims in the period the revenue is recognized. The Company carefully monitors the warranty work requested by its customers and management believes that its current warranty reserve appears adequate as of December 31, 2010. The Company’s product and service warranty as of December 31, 2010 is approximately $862,000 and is included in product warranty reserve in the consolidated balance sheets.

Additionally, our research and development contract revenue primarily relates to cost reimbursement research and development contracts associated with the development of PEM fuel cell technology. The Company generally shares in the cost of these programs with our cost-sharing percentages generally ranging from 30% and 50% of total project costs. Revenue from time and material contracts is recognized on the basis of hours expended plus other reimbursable contract costs incurred during the period. Revenue from fixed fee contracts is recognized on the basis of percentage of completion.

*Valuation of long-lived assets:* We value long-lived assets at their fair value at the date of acquisition. We utilize third-party valuation experts in our assessments of the fair values of acquired long-lived assets and allocate purchase price to the acquired assets and liabilities assumed accordingly. We assess the impairment of long-lived assets, including identifiable intangible assets, whenever events or changes in circumstances indicate that the carrying value may not be recoverable and, for goodwill, at least annually. Factors we consider important that could trigger an impairment review include, but are not limited to, the following:

significant underperformance relative to expected historical or projected future operating results;

significant changes in the manner of our use of the acquired assets or the strategy for our overall business;

significant negative industry or economic trends;

significant decline in our stock price for a sustained period; and

our market capitalization relative to net book value.

When we determine that the carrying value of long-lived assets, including identifiable intangible assets, may not be recoverable based upon the existence of one or more of the above indicators of impairment, we would measure any impairment based upon the provisions of FASB ASC No. 350, Intangibles - Goodwill and Other and FASB ASC No. 360-10-35-15, Impairment or Disposal of Long-Lived Assets, as appropriate. Any resulting impairment loss could have a material adverse impact on our financial condition and results of operations.

Goodwill impairment testing is performed at the segment (or reporting unit) level. The Company’s goodwill is evaluated at the entity level as there is only one reporting unit. Goodwill is assigned to reporting units at the date the goodwill is initially recorded. Once goodwill has been assigned to reporting units, it no longer retains association with a particular acquisition, and all of the activities within a reporting unit, whether acquired or organically grown, are available to support the value of the goodwill.

The Company performs its annual goodwill impairment assessment under FASB ASC No. 350, Intangibles - Goodwill and Other at the date of its fiscal year end or whenever events or changes in circumstances indicate that the carrying value may not be recoverable. As of December 31, 2010, the Company had no goodwill on its consolidated balance sheet as a result of the full impairment charge recorded in 2008. If goodwill exists, our impairment test is based on a set of assumptions regarding discounted future cash flows, which represent the Company’s best estimate of future performance at this time, as well as consideration of the Company’s market capitalization.

The goodwill impairment analysis is dependent on many variables used to determine fair value of the Company overall and the fair value of the Company’s assets and liabilities. Please see Note 6 (Goodwill and Other Intangible Assets) of the Notes to Consolidated Financial Statements for a description of the valuation methods and related estimates and assumptions used in our impairment testing. The complexity of the analysis does not permit a simplistic determination of the impact of changes in assumptions.

*Stock Based Compensation*: We recognize stock-based compensation expense associated with the vesting of share based instruments in the consolidated statements of operations. Determining the amount of stock-based compensation to be recorded requires us to develop estimates to be used in calculating the grant-date fair value of stock options. We calculate the grant-date fair values using the Black-Scholes valuation model. The Black-Scholes model requires us to make estimates of the following assumptions:

Expected volatility—The estimated stock price volatility was derived based upon a blend of implied volatility (i.e. management’s expectation of volatility) and the Company’s actual historic stock prices over the expected life of the options, which represents the Company’s best estimate of expected volatility.

Expected option life—The Company’s estimate of an expected option life was calculated in accordance with the simplified method for calculating the expected term assumption. The simplified method is a calculation based on the contractual life of the associated options.

Risk-free interest rate—We use the yield on zero-coupon U.S. Treasury securities for a period that is commensurate with the expected life assumption as the risk-free interest rate.

The amount of stock-based compensation recognized during a period is based on the value of the portion of the awards that are ultimately expected to vest. FASB ASC No. 718-10-55, Compensation - Stock Compensation – Overall – Implementation and Guidance Illustrations, requires forfeitures to be estimated at the time of grant and revised, if necessary, in subsequent periods if actual forfeitures differ from those estimates. The term “forfeitures” is distinct from “cancellations” or “expirations” and represents only the unvested portion of the surrendered option. We review historical forfeiture data and determine the appropriate forfeiture rate based on that data. We re-evaluate this analysis periodically and adjust the forfeiture rate as necessary. Ultimately, we will recognize the actual expense over the vesting period only for the shares that vest.

*Auction rate securities and auction rate debt securities repurchase agreement:* As of December 31, 2010, the Company no longer held any trading securities - auction rate debt securities since they were repurchased in July, 2010 at par by the third-party lender holding the collateral under the Repurchase Agreement which resulted in a corresponding reduction in amounts outstanding and the extinguishment of the Credit Line Agreement. We valued our auction rate debt securities and auction rate debt securities repurchase agreement based upon factors specific to these securities, including duration, tax status (taxable or tax-exempt), credit quality, the existence of insurance wraps, and the composition of the underlying student loans (Federal Family Education Loan Program or private loans). Assumptions were made about future cash flows based upon interest rate formulas as described in Note 3, Fair Value Measurements. Also, our valuation included estimates of market data including yields or spreads of similar trading instruments, when available, or assumptions believed to be reasonable. Illiquid credit markets and volatile equity markets have combined to increase the uncertainty inherent in our estimates and assumptions. As future events cannot be determined with precision, actual results could differ significantly from our estimates.

### Recent Accounting Pronouncements

A discussion of recently adopted and new accounting pronouncements is included in Note 2 (Summary of Significant Accounting Policies) of the Consolidated Financial Statements in Part II, Item 8 of this Annual Report on Form 10-K.

### Liquidity and Capital Resources

We have experienced recurring operating losses and as of December 31, 2010, we had an accumulated deficit of approximately $727.3 million. Substantially all of our losses resulted from costs incurred in connection with our operating expenses, research and development expenses and from general and administrative costs associated with our operations. To date, we have funded our operations primarily through private and public offerings of our common and preferred stock, our line of credit and maturities and sales of our available-for-sale securities. We anticipate incurring substantial additional losses and may never achieve profitability. Our May 2010 restructuring plan, which involves focusing on our GenDrive business and consolidating our operations into our Latham, New York facility, is expected to reduce these losses going forward. We anticipate that the restructuring will reduce our annual operating expenses by approximately $12 to $15 million, with all targeted expense reductions implemented by year end 2010.

As of December 31, 2010, we had approximately $11.0 million and $10.4 million of cash and cash equivalents and available-for-sale securities, respectively, to fund our future operations. We believe that our current cash, cash equivalents, available-for-sale securities balances and cash generated from future sales will provide sufficient liquidity to fund operations into or through the first quarter of 2012. This projection is based on our current expectations regarding product sales, cost structure, cash burn rate and operating assumptions (including those specified in the May 2010 restructuring plan described below), which do not include any funding from external sources of financing. In the event that our operating expenses are higher than anticipated or the gross margins and shipments of our GenDrive products do not increase as we expect, we may be required to implement contingency plans within our control to conserve and/or enhance our liquidity to meet operating needs. Such plans include; our ability to further reduce discretionary expenses, monetize our real estate assets through a sale-leaseback arrangement and obtain additional funding from licensing the use of our technologies. Our cash requirements relate primarily to working capital needed to operate and grow our business, including funding operating expenses, growth in inventory to support both shipments of new units and servicing the installed base, and continued development and expansion of our products. If our projections for significant order and shipment growth materialize, we believe we can obtain debt financing to fund the working capital needed to fulfill these orders and shipments. Our future liquidity and capital requirements will depend upon numerous factors, including those identified in “Risk Factors— We expect we will need to raise additional capital to fund our operations beyond the first quarter of 2012 and such capital may not be available to us, in which case we may have to reduce and/or cease our operations.” As a result, we can provide no assurance that we will be able to fund our operations beyond 2011 without external financing. We continue to evaluate opportunities to raise additional capital to fund our business beyond 2011. Alternatives under consideration include equity or debt financings, strategic alliances or joint ventures. If we are unable to obtain additional capital prior to the end of 2011, we may not be able to sustain our future operations beyond the first quarter of 2012 and may be required to delay, reduce and/or cease our operations and/or seek bankruptcy protection. We cannot assure you that any necessary additional financing will be available on terms favorable to us, or at all. Given the difficult current economic environment, we believe that it could be difficult to raise additional funds and there can be no assurance as to the availability of additional financing or the terms upon which additional financing may be available. Additionally, even if we raise sufficient capital through equity or debt financing, strategic alliances or otherwise, there can be no assurances that the revenue or capital infusion will be sufficient to enable us to develop our business to a level where it will be profitable or generate positive cash flow. If we raise additional funds through the issuance of equity or convertible debt securities, the percentage ownership of our stockholders could be significantly diluted, and these newly issued securities may have rights, preferences or privileges senior to those of existing stockholders. If we incur additional debt, a substantial portion of our operating cash flow may be dedicated to the payment of principal and interest on such indebtedness, thus limiting funds available for our business activities. The terms of any debt securities issued could also impose significant restrictions on our operations. Broad market and industry factors may seriously harm the market price of our common stock, regardless of our operating performance, and may adversely impact our ability to raise additional funds. Similarly, if our common stock is delisted from the NASDAQ Capital Market, it may limit our ability to raise additional funds. If we raise additional funds through collaborations and/or licensing arrangements, we might be required to relinquish significant rights to our technologies, or grant licenses on terms that are not favorable to us.

Several key indicators of liquidity are summarized in the following table:

*(in thousands)*

|  | Years ended or at December 31, 2010 | 2009 | 2008 |
| --- | ---: | ---: | ---: |
| Cash and cash equivalents at end of period | $10,955 | $14,581 | $80,845 |
| Trading securities – auction rate debt securities at end of period | - | 53,397 | 52,651 |
| Available-for-sale securities at end of period | 10,403 | 47,960 | 23,844 |
| Borrowings under line of credit at end of period | - | 59,375 | 62,875 |
| Working capital at end of period | 23,659 | 60,009 | 86,171 |
| Net loss | 46,959 | 40,709 | 121,700 |
| Net cash used in operating activities | 40,770 | 38,228 | 56,596 |
| Purchase of property, plant and equipment | 1,100 | 533 | 1,419 |

Included in trading securities and working capital at December 31, 2009, was $53.4 million of auction rate debt securities. The auction rate debt securities were secured by student loans which are generally guaranteed by the Federal government. These auction rate debt securities were structured to be tendered at par, at the investor’s option, at auctions occurring every 27-30 days. However, due to the liquidity issues in the credit and capital markets, the market for auction rate debt securities began experiencing auction failures in February 2008, and there have been no successful auctions for the securities held in our portfolio since the failures began. We continued to receive interest on these securities, subject to an interest rate cap formula for each security as periodically adjusted in accordance with the respective securities’ agreement. At December 31, 2009, the interest rates ranged from 0.61% to 3.48% on the auction rate debt securities.

The Company had pledged these securities as collateral to a third-party lender for a Credit Line Agreement (See Note 7, Credit Line Agreement and Auction Rate Debt Securities Repurchase Agreement) entered into in December 2008. In December 2008, the Company entered into a Repurchase Agreement with a third-party lender such that the Company may require the third-party lender to repurchase the auction rate debt securities pledged as collateral for the Credit Line Agreement at their par value, from June 30, 2010 through July 2, 2012 as full settlement for the advances on the Credit Line Agreement. The fair value of the Repurchase Agreement at its origination was $10.2 million. The fair value of the Repurchase Agreement at December 31, 2010 and December 31, 2009 was $0 and $6.0 million, respectively and is recorded as an asset on the condensed consolidated balance sheets. The change in fair value of approximately $6.0 million and $4.2 million during the years ended December 31, 2010 and 2009, respectively, was recorded as a loss in the consolidated statements of operations which is offset by the change in fair value of the auction rate debt securities held as collateral of approximately $6.0 million and $4.2 million that is recorded as a gain in the consolidated statements of operations for the years ended December 31, 2010 and 2009, respectively.

Effective July 1, 2010, all auction rate debt securities were repurchased at par by the third-party lender holding the collateral under the Repurchase Agreement which resulted in a corresponding reduction in amounts outstanding and the extinguishment of the Credit Line Agreement.

*Debt and Lease Arrangement.* In March, 2009, the Company signed a $1.7 million promissory note issued by Key Equipment Finance Inc. (Key Equipment) for the purpose of financing GenDrive products leased to Central Grocers. On April 1, 2009, the Company began leasing this same equipment to its customer, Central Grocers. In July 2009, the Company signed a letter of credit with Key Bank in the amount of $525,000. The standby letter of credit is required by the agreement negotiated between Air Products and Chemicals, Inc. (Air Products) and the Company to supply hydrogen infrastructure and hydrogen to Central Grocers at their distribution center. The standby letter of credit is collateralized by cash held in a restricted account.

In December 2010, the Company assigned all of its rights, title and interest in the lease to Somerset Capital Group, Ltd. (Somerset), but the Company will continue to provide maintenance in accordance with the lease agreement. In conjunction with the lease assignment, the Key Equipment promissory note was completely paid off by the Company and the collateralized cash was released to the Company. The Company sold all of the equipment under the lease to Somerset.

During 2010, the Company entered into the second phase of leased assets with Central Grocers and assigned all of its rights, title and interest in the second phase lease to Somerset, but the Company will continue to provide maintenance in accordance with the lease agreement. The Company sold all of the equipment under the second phase lease to Somerset.

In October 2009, the Company entered into a 15 month financing arrangement for an electrolyzer.

See Note 8 (Debt and Lease Arrangement) of the Consolidated Financial Statements for more detail.

Under Internal Revenue Code (IRC) Section 382, the use of loss carryforwards may be limited if a change in ownership of a company occurs. If it is determined that due to transactions involving the Company’s shares owned by its 5 percent shareholders a change of ownership has occurred under the provisions of IRC Section 382, the Company's Federal and state net operating loss carryforwards could be subject to significant IRC Section 382 limitations. As a result of certain equity transactions, the Company may have had an ownership change for IRC Section 382 purposes. Please refer to Part I Item 7 Recent Developments in this Annual Form 10-K.

Based upon an IRC Section 382 study, a Section 382 ownership change occurred in 2005 that resulted in approximately $479 million of the $674 million of Federal and state net operating loss carryforwards being subject to IRC Section 382 limitations and as the result of IRC Section 382 limitations, approximately $53.7 million of the net operating loss carryforwards acquired from H Power will expire prior to utilization, and approximately $27 million of the net operating loss carryforwards acquired from General Hydrogen will expire prior to utilization. Additionally, approximately $25 million of H Power’s remaining net operating loss carryforwards represent an unrecognized tax benefit. As a result of the IRC Section 382 limitations and the unrecognized tax benefits, these net operating loss carryforwards are not reflected in the Company’s deferred tax asset as of December 31, 2010.

Our cash requirements depend on numerous factors, including completion of our product development activities, ability to commercialize our fuel cell systems, market acceptance of our systems and other factors. As of December 31, 2010, we had cash and cash equivalents of $11.0 million, available-for-sale securities of $10.4 million and working capital of $23.7 million.

During the year ended December 31, 2010, cash used for operating activities was $40.7 million, consisting primarily of a net loss of $47.0 million offset, in part, by non-cash expenses in the amount of $8.8 million, including $7.2 million for amortization and depreciation, $1.2 million for stock based compensation, $1.0 million for the net proceeds/gain from the sale of assets, $377,000 for loss on disposal of property, plant and equipment and leased assets and $10,000 in bad debt. Cash provided by investing activities for the year ended December 31, 2010 was $98.6 million, consisting primarily of $59.4 million in proceeds from trading securities, $37.4 million of maturities (net of purchases) of available-for-sale securities and $988,000 net for the investment and sale in leased property offset, in part, by $1.1 million used to purchase property, plant and equipment. Cash used for financing activities for the year ended December 31, 2010 was approximately $61.4 million consisting of $59.4 million in repayment of borrowings under line of credit, $442,000 for the purchase of treasury stock and $1.6 million in principal payments on long-term debt.

Subsequent to December 31, 2010, we issued 508,790 shares of common stock for the achievement of performance objectives in 2010.

#### Contractual Obligations

Contractual obligations as of December 31, 2010, under agreements with non-cancelable terms are as follows:

|  | Total | \<1 Year | 1-3 Years | 3-5 Years | \>5 Years |
| --- | ---: | ---: | ---: | ---: | ---: |
| Long-term debt obligations | $ 9,956 | $ 9,956 | $ - | $ - | $ - |
| Operating lease obligations | 3,080,282 | 584,131 | 846,189 | 633,646 | 1,016,316 |
| Purchase obligations (A) | 1,275,796 | 1,275,796 | - | - | - |
| Other obligations (B), (C) | 212,995 | 212,995 | - | - | - |
| Total | $ 4,579,029 | $ 2,082,878 | $ 846,189 | $ 633,646 | $ 1,016,316 |

**(A)** The Company has contractual obligations for consulting and miscellaneous office services and an obligation to assume or buy out the leases for batteries, chargers and battery changing equipment for a certain amount of stand up rider trucks at Central Grocers. On January 14, 2011, the Company bought out the leases for a total amount of $958,817 and retains ownership of the equipment. See Note 18 (Commitments and Contingencies) of the Consolidated Financial Statements for more detail.

**(B)** The Company has a contractual obligation to NYSERDA, a New York State Government agency, to pay royalties to NYSERDA based on 0.5% of net sales of our GenCore and GenSys products if product is manufactured in the state of New York. See Note 18 (Commitments and Contingencies) of the Consolidated Financial Statements for more detail.

**(C)** The Company has a contractual obligation pursuant to a development collaboration agreement with General Electric Company (GE). The Company and GE agreed to extend the terms of the agreement such that the Company’s remaining obligation to purchase approximately $363,000 of services as of December 31, 2009 under the agreement became due and payable; however, the Company and GE entered into a Lease Agreement for space in the Company’s Latham, New York facility whereby the parties mutually agreed that the amount owed by the Company to GE under the development collaboration agreement would be offset by the rent owed by GE to the Company each month. The development collaboration agreement is scheduled to terminate on the earlier of (i) December 31, 2014 or (ii) upon the completion of a certain level of program activity. See Note 18 (Commitments and Contingencies) of the Consolidated Financial Statements for more detail.

## Market risk

As filed, 1,986 characters.

We invest our excess cash in government, government backed and interest-bearing investment-grade securities that we generally hold for the duration of the term of the respective instrument. We do not utilize derivative financial instruments, derivative commodity instruments or other market risk sensitive instruments, positions or transactions in any material fashion. Accordingly, other than with respect to auction rate debt securities, we believe that, while the investment-grade securities we hold are subject to changes in the financial standing of the issuer of such securities, we are not subject to any material risks arising from changes in interest rates, foreign currency exchange rates, commodity prices, equity prices or other market changes that affect market risk sensitive instruments.

A portion of the Company’s total financial performance was attributable to our operations in Canada and India. Our exposure to changes in foreign currency rates primarily arises from short-term inter-company transactions with our Canadian and Indian subsidiaries and from client receivables in different currencies. Foreign sales are mostly made by our Canadian subsidiaries in their respective countries and are typically denominated in Canadian dollars. Our foreign subsidiaries incur most of their expenses in their local currency as well, which helps minimize our risk of exchange rate fluctuations, particularly between the U.S. dollar, the Canadian dollar and the Indian dollar. As exchange rates vary, the Company’s results can be materially affected. As of December 31, 2010, all of the Company’s operations have been relocated to the United States.

In addition, the Company may source inventory among its worldwide operations. This practice can give rise to foreign exchange risk resulting from the varying cost of inventory to the receiving location as well as from the revaluation of intercompany balances. The Company mitigates this risk through local sourcing efforts.

## Controls and procedures

As filed, 2,502 characters.

*(a) Conclusion Regarding the Effectiveness of Disclosure Controls and Procedures.*

Under the supervision and with the participation of our management, including our principal executive officer and principal financial officer, we conducted an evaluation of the effectiveness of our disclosure controls and procedures, as such term is defined under Rule 13a-15(e) promulgated under the Securities Exchange Act of 1934, as amended (the Exchange Act). Based on this evaluation, our principal executive officer and our principal financial officer concluded that, as of the end of the period covered by this annual report, our disclosure controls and procedures were effective, in that they provide reasonable assurance that information required to be disclosed by us in the reports we file or submit, under the Exchange Act, is recorded, processed, summarized and reported within the time period specified in the SEC’s rules and forms.

#### (b) Management’s Report on Internal Control Over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Exchange Act Rules 13a-15(f) and 15d-15(f). Under the supervision and with the participation of our management, including our principal executive officer and principal financial officer, we conducted an evaluation of the effectiveness of our internal control over financial reporting based on the framework in *Internal Control—Integrated Framework* issued by the Committee of Sponsoring Organization of the Treadway Commission. Based on our evaluation under the framework in *Internal Control—Integrated Framework*, our management concluded that the Company maintained effective internal control over financial reporting as of December 31, 2010.

#### (c) Attestation Report of the Registered Public Accounting Firm

The attestation report of the Company’s independent registered public accounting firm regarding internal control over financial reporting is included on page F-3 of this Annual Report on Form 10-K and incorporated herein by reference.

#### (d) Changes in Internal Control Over Financial Reporting

There were no changes in the Company’s internal control over financial reporting identified in connection with the evaluation of such internal control that occurred during the Company’s last fiscal quarter that have materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting.

Filed Mar 31, 2011.
Source: SEC EDGAR, the filing index for accession 0001003297-11-000114. Last ingested by Listed: Nov 10, 2026, 04:06 ET. No prices; not investment advice.
