# Axcelis Technologies Inc: Form 10-K for the period ended Dec 31, 2008

- Company: [Axcelis Technologies Inc](/companies/acls.md) (CIK 1113232)
- Form: 10-K
- Filed: 2009-03-31
- Accepted by EDGAR: Mar 31, 2009, 16:53 ET
- Period: 2008-12-31
- Accession: 0001047469-09-003537
- Inline XBRL: no
- Main document: https://www.sec.gov/Archives/edgar/data/1113232/000104746909003537/a2191974z10-k.htm
- All documents and exhibits: https://www.sec.gov/Archives/edgar/data/1113232/000104746909003537/

## Business

As filed, 43,394 characters.

### Overview of Our Business

Axcelis Technologies, Inc. ("Axcelis," the Company," "we," "us," or "our") designs, manufactures and services ion implantation, dry strip and other processing equipment used in the fabrication of semiconductor chips. We sell to all of the top 20 semiconductor chip manufacturers worldwide. The ion implantation business comprised approximately 81.9% of our revenues in 2008 with the remaining 18.1% of revenues derived from our dry strip and other processing systems. In addition to equipment, we provide extensive aftermarket service and support, including spare parts, equipment upgrades, maintenance services and customer training. During 2008, we also owned 50% of the equity of SEN Corporation, an SHI and Axcelis Company, or "SEN," a leading producer of ion implantation equipment in Japan. SEN licenses technology from us for certain ion implantation products and has exclusive rights to market the licensed products in Japan. In February 2009, we entered into an agreement to sell our shares in SEN, which closed on March 30, 2009. See "SEN Corporation, an SHI and Axcelis Company" below.

Axcelis is headquartered in Beverly, Massachusetts. We maintain an Internet site at http://www.axcelis.com. We make available free of charge on and through this website our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act as soon as reasonably practicable after we electronically file such material with, or furnish it to, the Securities and Exchange Commission. Our website and the information contained therein or connected thereto shall not be deemed to be incorporated into this Form 10-K.

### Industry Overview

Semiconductor chips, also known as integrated circuits, are used in personal computers, telecommunication equipment, digital consumer electronics, wireless communication products and other applications. Types of semiconductor chips include memory chips (which store and retrieve information), microprocessors (logic devices which process information) and "system on chip" devices (which have both logic and memory features). Most semiconductor chips are built on a wafer of silicon of either 200mm (8 inches) or 300mm (12 inches) in diameter. Each semiconductor chip is made up of millions of tiny transistors or "switches" to control the functions of the device. Transistors are created in the silicon wafer by introducing various precisely placed impurities into the silicon in specific patterns. The process steps in the formation of transistors are traditionally referred to as "Front-End-of-Line." The "Back-End-of-Line" process steps connect the transistors and other components together through several overlapping layers of metal wires, known as interconnect, creating a complete circuit. Each layer of metal interconnect must be separated by a non-conductive or insulating material called inter-level dielectric. Each layer that is added is selectively patterned to all previous layers through a process called photolithography.

Semiconductor chip manufacturers utilize many different types of equipment in the making of integrated circuits. There are over 300 process steps utilizing over 50 different types of process tools required in the making of a single device like a microprocessor. Semiconductor chip manufacturers seek efficiency improvements through increased throughput, equipment utilization and higher manufacturing yields. Capacity is added by increasing the amount of manufacturing equipment in existing fabrication facilities and by constructing new fabrication facilities. Periodically, and historically every seven or eight years, the semiconductor industry adopts a larger silicon wafer size to achieve lower manufacturing costs. Semiconductor manufacturers can produce more chips on a larger wafer, thus reducing the overall manufacturing cost per chip. For example, the use of 200mm wafers in production began at the end of the 1980s. The migration from 200mm to 300mm began at the end of the 1990s. The majority of wafer fabrication facilities today are using wafers with a diameter of 300mm. In 2008, Axcelis derived 59% of total systems revenue (a component of product revenue) from sales of 300mm equipment.

The customer base is also changing. Given the magnitude of the investment needed to build a new wafer fabrication facility (often referred to as a "fab"), which today exceeds $1 billion and can be over $3 billion for a new 300mm fab, many customers are entering into partnerships to offset the cost of technology development and manufacturing. In addition, many chip developers outsource all or part of their chip manufacturing requirements to contract manufacturers, known as foundries. Foundries are predominantly located in Asia (historically Taiwan and Singapore) and are significant purchasers of semiconductor manufacturing equipment. China has recently seen the construction of many new foundries, which is expected to continue.

Traditionally, the semiconductor industry has grown on an annual basis. However, due to the nature of the industry, cyclicality is inherent. Chip manufacturers' periodic aggressive capitalization has historically led to overcapacity, excess chip inventories, softening chip prices and finally muted capitalization, which in turn results in lower demand for equipment. Changes in consumer and business demand for products in which chips are used also affect the industry. Current economic conditions have resulted in greatly reduced demand, and this situation is expected to continue for at least the next year. Therefore, a successful semiconductor equipment manufacturer must not only provide some of the most technically complex products manufactured in the world but also must design its business to thrive during the inevitable low points in the cycle.

### Axcelis' Strategy

Our mission and vision is to:

Ensure our customers' success by providing semiconductor manufacturing and support solutions and services that deliver the best performance at the lowest total cost of ownership.

Achieve and maintain market share leadership (#1 or #2) in the principal product market segments we serve.

Deliver profitability and positive cash flow through the industry cycles to maximize shareholder and employee value.

In addition to ion implanters, Axcelis offers dry strip and other processing systems that serve process steps in both the front and back end of line semiconductor manufacturing. In September 2007, Axcelis' management elected to discontinue future development of the thermal processing and photostabilization/curing product lines. Axcelis continues to provide aftermarket support for the installed base of these systems. Of our total 2008 revenues, 14.6% were derived from our dry strip products and related services and 3.5% from these other product lines.

Operationally, we manage our business based on three main tenets:

technology leadership,

operational excellence, and

customer partnerships.

We have continued to invest in research and development through the industry cycles to assure our products meet the needs of our customers. We continue to add to our portfolio of patents and unpatented proprietary technology to ensure that our investment in technology leadership is translated into unique product advantages. We take pride in our scientists and engineers who comprise over one-third of our workforce. We strive for operational excellence by focusing on ways to lower our manufacturing and design costs and to improve our delivery times to our customers. Finally, we have grown and improved our customer support infrastructure and have established Global Customer Teams and a focused account management structure to strengthen our customer relationships and increase customer satisfaction.

### Ion Implantation Systems

Ion implantation is a principal step in the transistor formation cycle of the semiconductor manufacturing process. An ion implanter is a large, technically advanced machine that injects dopants such as arsenic, boron or phosphorus into a silicon wafer. These dopants are ionized and therefore have electric charges. With an electric charge they can be manipulated, moved and accelerated with electric and magnetic fields. Ion implanters use these fields to create a beam of ions with a precisely defined amount of energy (ranging between several hundred and three million electron-volts) and with a precisely defined amount of beam current (ranging from microamps to milliamps). Certain areas of the silicon wafer are blocked off by a polymer material known as photoresist, which acts as a "stencil" to pattern devices so that the dopants will only enter the wafer where needed. The dopants change the electrical properties of the silicon wafer to create the active components of a chip, called the transistors. Typical process flows require twenty implant steps, with the most advanced processes requiring thirty or more. Each implant step is characterized by four key parameters: dopant type, dose (amount of dopant), energy (depth into the silicon) and tilt (angle of wafer relative to the ion beam).

In order to cover the wide range of implant steps, three different types of implanters have been developed, each designed to cover a specific range of applications, primarily defined by dose and energy. The three traditional implanter types are referred to as medium current, high current and high energy:

Medium current (mid dose) implanters are the original model of ion implanter, with mid-range energy and dose capability. These implanters are single wafer systems in which only one wafer at a time is slowly moved in front of the ion beam.

High current (high dose) implanters were the second type of implanter to emerge, having low energy capability and high dose range. High current implanters were initially designed as "multi wafer" or "batch" tools for maximum productivity, processing multiple wafers at the same time. To address smaller device geometries and provide high tilt, single wafer high current implanters now dominate the sector.

High energy implanters emerged to address the need for deeper implants with a high energy range and low dose. High energy implanters are available in both multi wafer and single wafer architectures.

Axcelis offers a complete line of high energy, high current and medium current implanters for all application requirements. Axcelis is a market leader in high energy ion implanters and was a market leader in multi wafer high current implanters for many years. Beginning in 2005, most customers shifted from multi wafer tools to single wafer tools for high current applications. Because Axcelis did not have a single wafer high current product at that time, we have experienced a significant loss of market share which we have yet to regain. We introduced our single wafer Optima HD product (for high current applications) in 2006. By the end of 2008, Axcelis had shipped 12 Optima HD products, but due to continued depressed market conditions the Company to date has not regained any significant market share. Our single wafer tool for high energy applications, the Optima XE, was released in the fourth quarter of 2007. We expect to maintain our leadership in the high energy segment through sales of our multi wafer high energy systems and the Optima XE.

Axcelis' line of single wafer implanters, known as the Optima platform, is designed to meet current and future application requirements of our customers by combining high productivity, excellent process performance, technical extendibility and maximum applications overlap. The three Optima products are:

**The Optima HD.** We use the term "high dose" or "HD" in connection with this product because the Optima HD fulfills all traditional high current requirements while extending beyond traditional high current energy and dose ranges. In order to maximize utilization and flexibility, the Optima HD can process some traditional mid current implants. In addition, the Optima HD is extendable into ultra-low energy applications to satisfy future process requirements. The Optima HD also supports molecular and hydrogen implants for emerging dual poly gate and silicon-on-insulator applications to improve device speed and performance.

**The Optima XE.** The Optima XE combines Axcelis' production-proven RF Linac high energy, spot beam technology with a high-speed, state-of-the-art single wafer endstation, enabling unmatched throughput. Axcelis' advanced spot beam ensures that all points across the wafer see the same beam at the same beam angle, resulting in exceptional process control and maximum yield. Also introduced in the fourth quarter of 2007 was the Optima HE, a reduced energy version of the Optima XE. This new single wafer high energy tool will meet the needs of those customers exploring a transition from our multi wafer high energy tools.

**The Optima MD.** We refer to this product as "mid dose" or "MD" because it has energy and dose capabilities which extend beyond the traditional medium current space into traditional high current and high energy spaces. With the introduction of the Optima MD in 2005, Axcelis re-entered the medium current market segment, which we had not participated in since 2001.

We believe the Optima products will meet customer demand for advantages in productivity, simplicity, process performance and technical extendibility.

### Dry Strip

In the process steps prior to ion implantation, a light sensitive, polymer-based liquid called photoresist is spread in a uniformly thin film on the wafer. Through a process known as photolithography, the photoresist is developed into a pattern like a stencil. Once the subsequent implant processes and etch steps (in which the top layer of the surface of the wafer not covered by photoresist is removed) are completed, the photoresist is no longer necessary and must be removed. The primary means of removing photoresist and residue is a process called "dry strip" or "ashing." Our dry strip machines, also called "ashers," use microwave and radio frequency energy to turn process gases into plasma, which then acts to "clean" the surface of the wafer by removing the photoresist and unwanted residue.

Stripping photoresist during the front-end-of-line transistor sequence is relatively simple and, therefore, the equipment required (sometimes referred to as "bulk strip") is characterized by high throughput and low cost. Our dry strip tools are capable of removing bulk photoresist from the wafer, as well as the residue left behind after bulk strip. In addition to its use prior to the front-end-of-line implant and etch processes, photoresist is also applied and removed during back-end-of-line processes. Stripping photoresist in the back-end-of-line interconnect sequence requires more complicated tools and cleaning chemistries due to the advanced materials being used at smaller device geometries. One key process is the stripping of the photoresist lying on top of the low-k dielectric film used between copper lines. Since the low-k materials are easily damaged during the photoresist removal process, tools must be designed to minimize this damage. We believe that Axcelis offers the only no damage low-k dry strip solution and that the advantages of our technology will drive growth for Axcelis' dry strip tools in this important application space. Our front-end photoresist removal capabilities coupled with our technology for back-end photoresist removal provide a complete solution for our customers.

### Other Processing Systems

***Photostabilization/Curing Systems*** In some manufacturing processes, the photoresist stencil material spread on the wafer must be hardened or "cured." Axcelis' curing (also known as photostabilization) systems use proprietary ultraviolet light sources to cure the photoresist so the material maintains the desired pattern during the subsequent implant processes and etch steps.

The photostabilization and curing market has remained a small segment. In past years, Axcelis has explored growth opportunities for this product line in curing and drying new low-k dielectric materials. To date, broad adoption of such materials has not occurred. In the fourth quarter of 2007, Axcelis determined that the current and near term market opportunity for the curing product line did not justify continuing investment in these products. As a result, Axcelis decided to cease future product development in curing to focus on profitable growth within the company's core ion implant and dry strip businesses.

***Thermal Processing Systems*** At a number of points during the manufacturing process, silicon wafers need to be heated rapidly, often to 900 degrees centigrade or higher, in order to complete chemical or electronic reactions. This heating process is referred to as rapid thermal processing, or RTP. Our thermal processing systems employ a patented design to process a single wafer in a hot wall vertical reactor. This technology differs from most other thermal processing equipment, which regulate temperature through a lamp-based system. The RTP market is dominated by a single major competitor and, while the Axcelis RTP systems have technological advantages for certain applications, our penetration into the market remains low. In the third quarter of 2007, Axcelis determined that the current and near term market opportunity for the RTP product line did not justify continuing investment in these products. As a result, Axcelis decided to cease future product development in RTP to focus on profitable growth within the company's core ion implant and dry strip businesses.

### Aftermarket Support and Services

We offer our customers extensive aftermarket service and support throughout the lifecycle of the equipment we manufacture. We believe that more than 4,200 of our products, including products shipped by SEN, are in use in 50 countries worldwide. The service and support that we provide include spare parts, equipment upgrades, and maintenance services. We offer service out of 51 field offices in sixteen countries. Revenues generated through our service and support business represented about 57.1%, 42.2%, and 38.2% of revenue in 2008, 2007, and 2006, respectively.

Our customer support network consists of over 502 staff, including sales and marketing personnel, field service engineers, and spare parts and applications engineers, as well as employees located at our manufacturing facilities who work with our customers to provide customer training and documentation, product, process and applications support.

Most of our customers maintain spare parts inventories for our machines. In addition to our web-based spare parts management and replenishment tracking program, we offer a number of Business-to-Business options to support our customers' parts management requirements. AMI (Axcelis Managed Inventory) provides the customer with full spares support through which Axcelis takes responsibility for the complete supply chain. The expansion of these services provides ease of use alternatives that help us reduce order fulfillment costs and improve cycle time, resulting in an expanded customer base for this service offering. See Note 2 to our Consolidated Financial Statements contained in Item 15 of this Form 10-K for a discussion of revenue classifications from our aftermarket business.

### Sales and Marketing

We primarily sell our equipment and services through our direct sales force. We have 16 sales offices in ten countries. Aftermarket service and support is also offered at all of these offices. In the

United States, we conduct sales and marketing activities from seven locations. Outside of the United States, our sales offices are located in Taiwan, South Korea, China, Japan, Germany, Singapore, Netherlands, France and Italy. In addition, isolated sales are made in smaller markets through distributors and manufacturing representatives.

In Japan, we have exclusively licensed specified ion implant products to our joint venture, SEN, which manufactures and sells its machines and services directly to semiconductor manufacturers. This license to SEN was terminated at the closing of the sale of our investment in SEN and a new license was entered into. After the closing of the transaction Axcelis can market all of its ion implant products in Japan. See "SEN Corporation, an SHI and Axcelis Company" below. We sell our non-implant products in Japan through Toda Technologies Service Co., Ltd., an unaffiliated company, which provides sales and support services for these products.

International revenues, including export sales from our U.S. manufacturing facilities to foreign customers, sales by foreign subsidiaries and branches, and royalties, accounted for 64.7% of total revenue in 2008, 67.0% in 2007, and 67.1% in 2006. Substantially all of our sales are denominated in U.S. dollars. See Note 17 to our Consolidated Financial Statements contained in Item 15 of this Form 10-K for a breakdown of our revenues and long-lived assets in the United States, Europe and Asia.

### Customers

In 2008, the top 20 semiconductor manufacturers accounted for approximately 75.8% of total semiconductor industry capital spending, down from 80% in 2007. These manufacturers are from the four largest semiconductor manufacturing regions in the world: the United States, Asia Pacific (Taiwan, South Korea, Singapore, and China), Japan and Europe. The Company and SEN together serve all of the 20 largest semiconductor manufacturers. We believe that more than 4,200 of our products, including products shipped by SEN, are in use worldwide.

Revenues from our ten largest customers accounted for 51.5%, 57.8%, and 54.9% of revenue in 2008, 2007, and 2006, respectively. We expect that sales of our products to relatively few customers will continue to account for a high percentage of revenue for the foreseeable future. In 2008, one customer accounted for 11.7% of revenue. In 2007, two customers accounted for 12.2% and 10.5% of revenue, respectively. However, in 2006, no single customer accounted for greater than 10% of revenue.

### SEN Corporation, an SHI and Axcelis Company

Since 1983, we have exclusively licensed our Japanese joint venture, SEN Corporation, an SHI and Axcelis Company, to manufacture and sell specific ion implanter systems using our technology in Japan. As of year end 2008, SEN had 532 employees and 149 temporary staff based in Tokyo and Saijo, Japan. We owned 50% of the equity of SEN and our senior managers served as half of the members of SEN's Board of Directors until March 30, 2009 when our investment in SEN was sold to Sumitomo Heavy Industries, Ltd., a Japanese corporation ("SHI") and our joint venture partner. SHI now controls 100% of the equity of SEN. See discussion below about the sale of our investment in SEN to SHI.

Under a Master License Agreement with SEN dated January 16, 1996, as amended (the "1996 License Agreement"), Axcelis has licensed SEN to make and sell specified ion implanters, not including the Optima MD, Optima HD and Optima HE, which are available in Japan directly from Axcelis. SEN pays royalties on its net sales of licensed ion implantation products in accordance with the rates set forth in the 1996 License Agreement. The royalty rates vary depending on the type of implanter sold. These royalty amounts were $4.1 million, $6.1 million and $9.2 million in 2008, 2007 and 2006, respectively. In 2006, Axcelis initiated an arbitration in Tokyo under the 1996 License Agreement to seek to resolve an issue regarding royalties due on SEN's sales of the SHX, its single wafer high energy implanter. To date, the amount of these unpaid royalties is not material. See Item 3. "Legal

Proceedings." This arbitration will be dismissed in connection with Axcelis' sale of its investment in SEN under the Share Purchase Agreement between Axcelis, SHI and SEN, as discussed below. Under the 1996 License Agreement, SEN has granted us a royalty-free worldwide (except for Japan) license to use any technology SEN develops that is an improvement to our technology. The 1996 License Agreement between SEN and Axcelis will continue in effect until terminated. The license agreement may be terminated by Axcelis or by SEN, with the approval of the Axcelis representatives on the SEN Board, on twelve months' notice. The 1996 License Agreement has been be terminated in connection with Axcelis' sale of its shares in SEN under the Share Purchase Agreement between Axcelis, SHI and SEN, as discussed below.

In 2007, Axcelis and SHI entered into a memorandum of understanding that provided for SEN to make an aggregate annual dividend of 40% of its net income to the two shareholders. Under this agreement, Axcelis received dividends of $2.0 million, $6.7 million, and $5.7 million for SEN's fiscal years ended March 31, 2008, 2007, and 2006, respectively. These amounts equaled Axcelis' 50% share of 40% of SEN's net earnings for each year. The memorandum of understanding provides that the two shareholders may re-negotiate the dividend rate for years after 2008. Absent a new agreement, the memorandum of understanding provides for continuing annual dividends at the level of 40% of SEN's net income. Despite this, there can be no guarantee that SHI or SEN management will comply with this obligation. Axcelis expects SEN to record a loss for its fiscal year ending March 31, 2009, in which case no dividend will be paid for that year. This memorandum of understanding was terminated in connection with Axcelis' sale of investment in SEN under the Share Purchase Agreement discussed below.

On February 26, 2009, Axcelis, SHI and SEN entered into a Share Purchase Agreement pursuant to which Axcelis agreed to sell to SHI all of Axcelis' common shares in SEN in exchange for a cash payment of 13 billion Yen on the later of March 31, 2009 or the date on which certain closing conditions are satisfied (the "Share Purchase Agreement"). On March 2, 2009, the Company purchased a foreign exchange option to hedge the proceeds from the transaction. This option insures proceeds of approximately $132.7 million before advisor fees and other expenses. On March 30, 2009, the Company completed the sale of its shares in SEN, to SHI for proceeds of $122.3 million net of advisory fees and other expenses. The Company will record a net gain of approximately $1.2 million on the sale of its investment in SEN in the first quarter.

SEN remains liable to the Company for royalties and commissions on products sold through March 31, 2009. In connection with the closing under the Share Purchase Agreement, Axcelis and SEN entered into a new License Agreement which allows each company to continue to use certain patents and technical information owned by the other to make and sell ion implant systems on a worldwide, royalty-free, perpetual basis. The transaction terminated all existing agreements among the three parties relating to the SEN joint venture. In addition, the arbitration with SEN initiated by Axcelis in Tokyo will be dismissed.

On March 30, 2009, $86.4 million of the proceeds from the sale of our shares in SEN were used for a direct pay-off of all amounts due to the holder of our 4.25% Convertible Senior Subordinated Notes (the "Notes") that matured in January 2009.

### Research and Development

Our industry continues to experience rapid technological change, requiring us to frequently introduce new products and enhancements. Our ability to remain competitive in this market will depend in part upon our ability to develop new and enhanced systems and to introduce these systems at competitive prices on a timely and cost effective basis.

We devote a significant portion of our personnel and financial resources to research and development programs and seek to maintain close relationships with our customers to remain responsive to their product needs. We have also sought to reduce the development cycle for new products through a collaborative process whereby our engineering, manufacturing and marketing personnel work closely together with one another and with our customers at an earlier stage in the process. We also use 3D, computer-aided design, finite element analysis and other computer-based modeling methods to test new designs.

Our expenditures for research and development were $63.3 million, $72.0 million and $72.4 million in 2008, 2007, and 2006, respectively, or 25.3%, 17.8% and 15.7% of revenues, respectively. We expect that research and development expenditures will continue to represent a substantial investment in future years.

### Manufacturing

We manufacture our products at our 417,000 sq. ft. facility in Beverly, Massachusetts. Our manufacturing facilities employ advanced manufacturing methods and technologies, including lean manufacturing, Six Sigma controls and processes, and web-enabled inventory purchase systems. We manufacture our products in clean room environments that are similar to the clean rooms used by semiconductor manufacturers for wafer fabrication.

Our Beverly facility is also the location of our Advanced Technology Center, which houses an advanced process development laboratory with 12,500 sq. ft. of class 10/100/1000 clean room space for product demonstration and process development and a 34,000 sq. ft. customer training center. These demonstration facilities are used to facilitate sales and to allow customers to test their processing steps on our systems under conditions that substantially replicate the customers' production environment. These environmental conditions include power requirements, toxic gas usage, air handling requirements, including humidity and temperature, equipment bay configuration, wafer characteristics and other factors. These procedures are intended to reduce installation and production qualification times and the amount of particulates and other contaminants in the assembled system, which in turn improves yield and reduces downtime for the customer.

Most ion implant systems are assembled in five separate modules. The modules are then tested individually using specially developed software and are shipped directly to the customer, bypassing the integration of the modules into a complete implanter. As a result, the implanter system is integrated for the first time on the customer's factory floor and tested for quality assurance. We refer to this process as "ship from cell." Ship from cell manufacturing allows us to more quickly and efficiently ship and install ion implant systems than the traditional manufacturing method involving a full integration of the system in our factory. Ship from cell saves an average of 4 weeks in our manufacturing cycle time, thus improving product margins and lead-times for our customers. All of our 200mm and 300mm implanters are qualified for ship from cell manufacturing.

Each system module is packaged to maintain clean room standards during shipment. Installation is not a complex process and does not require specialized skills. A team of assemblers from the customer and Axcelis typically performs the installation. The process includes placing and leveling the equipment at its installation site, connecting it to sources of gas, water and electricity and recalibrating it to specifications that had previously been met during module testing.

We purchase materials, components and sub-assemblies, such as pumps, machine components, power supplies and other electrical components, from various suppliers. These items are either standard products or built to our specifications. Some of the components and sub-assemblies included in our products are obtained either from a sole source or a limited group of suppliers. Disruption to our source could affect our ability to deliver products to our customers. We have installed a web-based supply chain system in order to increase efficiency and cut costs associated with obtaining materials and components. This system electronically exchanges information with our vendors as to purchase orders, forecasts and automatic delivery updates.

We outsource many of our major sub-assemblies and components. We have several large outsourcing partners that provide this service for assemblies like the frames, power distribution systems, wafer handling systems and vacuum systems. Axcelis will continue to aggressively pursue outsourcing opportunities where the economics are justified, with a goal of enabling factory capacity, quality and margin improvement. We outsource complex assemblies up to and including module build. Critical assemblies will continue to be manufactured in house due to the high level of expertise required. We are dependent upon a limited number of suppliers for many components and sub-assemblies, which could result in increased costs or delays in the manufacture and sale of our products.

### Competition

The semiconductor wafer fabrication equipment market is highly competitive and is characterized by a small number of medium to large size participants. We compete in two principal product markets in both the front-end and back-end of the semiconductor wafer fabrication process: ion implantation and dry strip. We believe that preexisting relationships have a significant influence on a customer's choice of equipment supplier. Other significant competitive factors in the semiconductor equipment market include price, cost of ownership, equipment performance, customer support, breadth of product line, distribution and financial viability.

***Ion Implantation.*** In ion implantation, our major competitor in high energy and high current is Varian Semiconductor Equipment Associates, Inc. In the medium current equipment segment, we compete with Nissin Electric Co., Ltd. and Varian. After the sale of our investment in SEN to SHI, SEN is licensed to use certain of our technology to compete in the world wide ion implantation market. Our Optima HD Imax competes against Plasma Immersion Systems from both Varian and Applied Materials.

***Dry Strip.*** Our principal competitors in the dry strip product market are PSK, Inc., Mattson Technology Inc. and Novellus Systems, Inc.

### Intellectual Property

We rely on patent, copyright, trademark and trade secret protection, as well as contractual restrictions, in the United States and in other countries to protect our proprietary rights in our products and our business. As of January 1, 2009, we had 294 patents issued in the United States and 514 patents granted in other countries, as well as 816 patent applications (99 in the United States and 717 in other countries) on file with various patent agencies worldwide. Patents are generally in effect for up to 20 years from the filing of the application.

We intend to file additional patent applications and grow our intellectual property portfolio as appropriate. Although patents are important to our business, we do not believe that we are substantially dependent on any single patent or any group of patents.

We have trademarks, both registered and unregistered, that are maintained to provide customer recognition for our products in the marketplace.

From time to time, we enter into license agreements with third parties under which we obtain or grant rights to patented or proprietary technology. Except for our license agreement with SEN (described above under "SEN Corporation, an SHI and Axcelis Company"), we do not believe that any of our licenses are currently material to us.

We can give no assurance that we, our licensors, licensees, customers or suppliers will not be subject to claims of patent infringement or claims to invalidate our patents, or that any such claims will not be successful, requiring us to pay substantial damages or delete certain features from our products or both.

### Backlog

As of December 31, 2008, our systems backlog (excluding deferred systems revenue) was $6.3 million, as compared to $20.5 million as of December 31, 2007. Systems backlog including deferred systems revenue was $20.7 million and $60.7 million as of December 31, 2008 and 2007, respectively. Decrease in backlog is representative of the overall downturn in the semiconductor equipment market. We believe it is meaningful to investors to include deferred systems revenue as part of our backlog. Deferred systems revenue represents revenue that will be recognized in future periods based on prior shipments. Our policy is to include in backlog only those system orders for which we have accepted purchase orders and typically are due to ship within six months. Backlog does not include orders received for our service business (spare parts, consumables and service contracts) due to the turn rate associated with that business. Generally, orders for services or parts received during the quarter are performed or shipped within the same quarter. All orders are subject to cancellations or rescheduling by customers with limited or no penalties. Due to possible changes in system delivery schedules, cancellations of orders, and delays in systems shipments, our backlog at any particular date is not necessarily indicative of our actual sales for any succeeding period. In addition, our backlog at the beginning of a quarter typically does not include all orders required to achieve our sales objectives for that quarter and is not a reliable indicator of our future sales.

### Employees

As of December 31, 2008, we had 1,154 employees and 8 temporary staff worldwide, of which 847 work in North America, 231 in Asia and 76 in Europe. We consider our relationship with our employees to be good. Our employees are not represented by a labor union and are not subject to a collective bargaining agreement. Some of our European locations have formed work councils, which have certain information and discussion rights under applicable law.

### Environmental

We are subject to environmental laws and regulations in the countries in which we operate that regulate, among other things: air emissions; water discharges; and the generation, use, storage, transportation, handling and disposal of solid and hazardous wastes produced by our manufacturing, research and development and sales activities. As with other companies engaged in like businesses, the nature of our operations exposes us to the risk of environmental liabilities, claims, penalties and orders. We believe, however, that our operations are in substantial compliance with applicable environmental laws and regulations and that there are no pending environmental matters that would have a material impact on our business. We are ISO-14001 certified at our Beverly, MA facility.

### Executive Officers

***Mary G. Puma,*** 51, has been our President and Chief Executive Officer since January 2002 and Chairman since 2005. From May 2000 until January 2002, Ms. Puma was our President and Chief Operating Officer, prior to which she served as a Vice President of Axcelis from February 1999. In 1998, she became General Manager and Vice President of the Implant Systems Division of Eaton Corporation, a global diversified industrial manufacturer. In May 1996, she joined Eaton as General Manager of the Commercial Controls Division. Prior to joining Eaton, Ms. Puma spent 15 years in various marketing and general management positions for General Electric Company. Ms. Puma is a director of Nordson Corporation, North Shore Medical Center and Semiconductor Equipment and Materials International (SEMI).

***Stephen G. Bassett,*** 60, has been our Chief Financial Officer since April 2004 and Executive Vice President, Finance since May 2005, prior to which he was Senior Vice President, Finance since 2004. Prior to that, Mr. Bassett had served as interim Chief Financial Officer for Axcelis beginning in June

2003\. From 1999 to 2002, Mr. Bassett served as Chief Financial Officer of Ezenia! Inc., a provider of real-time voice, video and data collaboration solutions for corporate networks and the Internet. From 1996 to 1999, Mr. Bassett worked as an independent financial consultant. From 1981 until 1996, Mr. Bassett served as an audit partner at Ernst & Young LLP, where he managed auditing services for a variety of organizations, ranging from multinational Fortune 500 companies to emerging businesses.

***Kevin J. Brewer,*** 50, is our Executive Vice President, Manufacturing Operations, a position he has held since November 2008, prior to which he had been Vice President of Manufacturing Operations since October 2002 and Director of Operations from 1999 to 2002. Prior to joining Axcelis in 1999, Mr. Brewer was Director of Operations, Business Jets at Raytheon Aircraft Company, a leading manufacturer of business and special mission aircraft owned by Raytheon Company, a manufacturer of defense, government and commercial electronics, as well as aircraft. Prior to that, Mr. Brewer held various management positions in operations and strategic planning in Raytheon Company's Electronic Systems and Missile Systems groups.

***Lynnette C. Fallon,*** 49, has been our General Counsel and corporate Secretary since 2001 and Executive Vice President, Human Resources/Legal since May 2005. Prior to that, Ms. Fallon was Senior Vice President HR/Legal since 2002, and Senior Vice President since 2001. Before joining Axcelis, Ms. Fallon was a partner in the Boston law firm of Palmer & Dodge LLP since 1992, where she was head of the Business Law Department from 1997 to 2001.

***Matthew P. Flynn,*** 52, is our Executive Vice President, Global Customer Operations, a position he has held since May 2005, prior to which he was Vice President Global Customer Operations since October 2002. Before then, Mr. Flynn was Director of Sales, Ion Implant and RTP systems. Prior to joining Axcelis in 1996, Mr. Flynn held executive and management roles at Cherry Semiconductor, an integrated circuit manufacturer, and at Teledyne Inc., in its microelectronics business.

***Craig Halterman,*** 45, has been our Chief Information Officer since July 2000 and a Senior Vice President since May 2005, before which he was a Vice President since July 2000 and our Director of Information Technology since the beginning of 2000. Prior to joining us, Mr. Halterman was Information Technology Director at Honeywell/AlliedSignal in its defense and space systems business since 1997. Before that, Mr. Halterman held various information technology positions at The Dow Chemical Co., Thompson Consumer Electronics, General Electric Co. and RCA Consumer Electronics.

***William Bintz,*** 52, has been our Senior Vice President, Marketing since September 2007. Mr. Bintz joined Axcelis in early 2006 as Director of Marketing for curing and cleaning products and shortly thereafter became Vice President of Product Marketing where he expanded his responsibilities to include implant products as well. Prior to joining Axcelis, from 2002 Mr. Bintz was Product Director for Medium Current and High Energy Ion Implant System at Varian Semiconductor Equipment Associates, Inc. Before that, he was General Manager of the Materials Delivery Products Group at MKS Instruments, beginning in 1999, and General Manager of the Thermal Processing Systems Division at Eaton Corporation (now Axcelis) beginning in 1995.

## Risk factors

As filed, 28,453 characters.

Some of the matters discussed in this filing contain forward-looking statements regarding future events that are subject to risks and uncertainties. From time to time, we may also make other forward-looking public statements, such as statements concerning our then expected future revenues or earnings or concerning the prospects for our markets or our product development, projected plans, performance, order procurement as well as other estimates relating to future operations. Forward-looking statements may be in reports filed under the Securities Exchange Act of 1934, as amended (the "Exchange Act"), in registration statements filed under the Securities Act of 1933, as amended (the "Securities Act"), in press releases or in informal statements made with the approval of an authorized executive officer. The words or phrases "will likely result," "are expected to," "will continue," "is anticipated," "estimate," "project," or similar expressions are intended to identify "forward-looking statements" within the meaning of Section 21E of the Exchange Act and Section 27A of the Securities Act, as enacted by the Private Securities Litigation Reform Act of 1995.

We wish to caution you not to place undue reliance on these forward-looking statements. These statements speak only as of the date on which they are made and represent management's expectations based on information available to them at that time. The factors listed below, as well as other factors that we may or may not have currently identified, could affect our financial or other performance and could cause our actual results for future periods to differ materially from opinions or statements expressed with respect to future periods or events in any current statement.

We will not undertake, and specifically decline, any obligation to publicly release revisions to these forward-looking statements to reflect either circumstances after the date of the statements or the occurrence of events that may cause us to re-evaluate our forward-looking statements, except as may be required by law.

Important factors that could cause our actual results to differ materially from those projected in forward-looking statements in this Form 10-K or that may otherwise be made by us or on our behalf and that make an investment in our securities risky include, but are not limited to: our ability to maintain our Nasdaq listing, the cyclical nature of the semiconductor industry, whether we can keep pace with rapid technological changes in the semiconductor manufacturing processes, the highly competitive nature of the semiconductor equipment industry, and quarterly fluctuations in operating results attributable to the timing and amount of orders for our products and services, as well as the other risk factors, discussed in the section titled "Outlook" and below. If any of those risk factors actually occurs, our business, financial condition and results of operations could be seriously harmed and the trading price of our common stock could decline.

### We may be unable to obtain needed additional capital to finance our operations.

Our capital requirements may vary widely from quarter to quarter, depending on, among other things, capital expenditures, fluctuations in our operating results, financing activities, acquisitions and investments and inventory and receivables management. Although, we are forecasting continuing depressed market conditions throughout 2009, which will result in negative cash flow from operations, we believe that our existing cash and cash equivalents will be sufficient to satisfy our anticipated cash requirements through the end of 2009, this, of course, depends on the accuracy of our assumptions about levels of sales and expenses, and a number of factors, including those described in these "Risk Factors," could cause us to require additional capital from external sources. We currently do not have access to any sources of external capital. In addition, if the downturn in the semicap equipment industry continues into 2010 and our operating performance does not improve significantly as compared to the fourth quarter of 2008, it could have a significant effect on our liquidity and our ability to continue in the future as a going concern. Depending on market conditions, future debt or equity financings may not be possible on attractive terms or at all. In addition, future debt or equity financings could be dilutive to the existing holders of our common stock.

### The general economic crisis may further hurt our business.

Factors such as consumer spending, business investment, and the volatility and strength of the capital markets all affect the business and economic environment, and ultimately, the amount of profitability of our business. Continuing capital market upheavals may have an adverse effect on us because we are dependent on customer behavior. Our revenues are likely to continue to decline in such circumstances and our profit margins will continue to erode. In addition, as a result of extreme prolonged events, such as the global credit crisis, we could incur significant losses

***If semiconductor manufacturers do not make sufficient capital expenditures, our sales and profitability will be harmed.***

Almost all of our new orders will depend upon demand from semiconductor manufacturers who build or expand fabrication facilities. When the rate of construction or expansion of fabrication facilities declines, demand for our systems will decline, reducing our revenues. Revenue decline also hurts our profitability because our fixed cost structure and our continued investments in engineering, research and development and marketing necessary to develop new products and to maintain extensive customer service and support capabilities limit our ability to reduce expenses in proportion to declining sales.

### Our financial results may fluctuate significantly.

We derive most of our revenues from the sale of a relatively small number of expensive products to a small number of customers. The list prices on these products range from $.2 million to over $5.0 million. At our current sales level, each sale, or failure to make a sale, has a material effect on us in a particular quarter. In a given quarter, a number of factors can adversely affect our revenues and results, including changes in our product mix, increased fixed expenses per unit due to reductions in the number of products manufactured, and higher fixed costs due to increased levels of research and development and expansion of our worldwide sales and marketing organization. Our financial results also fluctuate based on gross profit realized on sales. A variety of factors may cause gross profit as a percentage of revenue to vary, including the mix and average selling prices of products sold, costs to manufacture and customize systems and warranty costs. New product introductions may also affect our gross margins. Fluctuations in our results may have an adverse effect on the price of our common stock.

***Our financial results may fall short of anticipated levels; forecasting revenues and profitability is complex and may be inaccurate.***

Management typically provides financial forecasts for the subsequent quarter in the earnings release for each quarter. These forecasts are based on assumptions believed to be reasonable when made of shipment timing and contract terms. However, in some cases, the final customer terms may not have been agreed and documented at the time the forecast is made, so the level of revenues recognizable in a particular quarter may vary from the forecast. Our lengthy sales cycle, coupled with customers' competing capital budget considerations, make the timing of customer orders uneven and difficult to predict. In addition, our backlog at the beginning of a quarter typically does not include all orders required to achieve our sales objectives for that quarter and is not a reliable indicator of our future sales. As a result, our revenues and operating results for a quarter depend on our shipping orders as scheduled during that quarter, receiving customer acceptance of shipped products during the quarter, and obtaining new orders for products to be shipped in that same quarter. Any delay in, or cancellation of, scheduled shipments and customer acceptances or in shipments from new orders could materially and adversely affect our financial results.

Accounting rules addressing revenue recognition, have added additional complexity in forecasting quarterly revenues and profitability. Orders for our products usually contain multiple delivery elements that result in revenue deferral under generally accepted accounting principles. Due to the foregoing factors, investors should understand that our actual financial results for a quarter may vary significantly from our forecasts of financial performance for that quarter. Failure to meet forecast financial performance may have an adverse effect on the price of our common stock.

***The semiconductor industry is highly cyclical and we expect that demand for our products will regularly increase and decrease, making it difficult to manage the business and potentially causing harm to our sales and profitability.***

The semiconductor business is highly cyclical, experiencing upturns when the demand for our products is high and downturns when our customers are not investing in new or expanded fabrication facilities. Our revenues can vary significantly from one point in the cycle to another, making it difficult to manage the business, both when revenues are increasing and when they are decreasing. In addition, a substantial portion of our operating expenses are fixed and do not fluctuate with changes in volume. Significant decreases in revenues can therefore have a disproportionate effect on profitability.

***Oversupply in the semiconductor industry reduces demand for capital equipment, including our products.***

From time to time, inventory buildups in the semiconductor industry, resulting in part from periodic downturns, produce an oversupply of semiconductors. This will cause semiconductor manufacturers to revise capital spending plans, resulting in reduced demand for capital equipment such as our products. If an oversupply is not reduced by increasing demand from the various electronics industries that use semiconductors, which we cannot accurately predict, our sales and profitability will be harmed.

***If we fail to develop and introduce reliable new or enhanced products and services that meet the needs of semiconductor manufacturers, our results will suffer.***

Rapid technological changes in semiconductor manufacturing processes require us to respond quickly to changing customer requirements. Our future success will depend in part upon our ability to develop, manufacture and successfully introduce new systems and product lines with improved capabilities and to continue to enhance existing products, including products that process 300 millimeter wafers using a single wafer platform. This will depend upon a variety of factors, including new product selection, timely and efficient completion of product design and development and of manufacturing and assembly processes, product performance in the field and effective sales and marketing. In particular:

We must develop the technical specifications of competitive new systems, or enhancements to our existing systems, and manufacture and ship these systems or enhancements in volume in a timely manner.

We will need to accurately predict the schedule on which our customers will be ready to transition to new products, in order to accurately forecast demand for new products while managing the transition from older products.

We will need to effectively manage product reliability or quality problems that often exist with new systems, in order to avoid reduced orders, higher manufacturing costs, delays in acceptance and payment and additional service and warranty expenses.

Our new products must be accepted in the marketplace.

Our failure to meet any of these requirements will have a material adverse effect on our operating results and profitability.

***If we are unable to gain market share in the 300 millimeter single wafer high current ion implant market in a timely way, our results will suffer.***

Our future success will depend in large part upon our ability to successfully gain market share with our new single wafer ion implant system, the Optima HD. We were late to market with the Optima HD system, so we must compete against established competitive offerings for the high current 300 millimeter ion implant market. The Optima HD serves the 300 millimeter high current (high dose) market segment of ion implant, which is a substantial portion of the total market opportunity available to Axcelis. Our success will depend upon a variety of factors, including the existence of customer opportunities for the Optima HD to be selected, timely and efficient completion of product reliability and development and of manufacturing and assembly processes, product performance in the field and effective sales and marketing. In particular:

The technical specifications of the Optima HD system must be competitive;

The Optima HD must be manufactured and shipped in volume in a timely manner;

We must effectively manage any product reliability or quality problems that often exist with new systems in order to avoid reduced orders, higher manufacturing costs, delays in acceptance and payment and additional service and warranty expenses; and

The Optima HD must be accepted in the marketplace.

Our failure to meet any of these requirements will have a material adverse effect on our operating results and profitability.

***If we fail to compete successfully in the highly competitive semiconductor equipment industry, our sales and profitability will decline.***

The market for semiconductor manufacturing equipment is highly competitive and includes companies with substantially greater financial, engineering, manufacturing, marketing and customer service and support resources than we have that may be better positioned to compete successfully in the industry. In addition, there are smaller, emerging semiconductor equipment companies that provide innovative systems with technology that may have performance advantages over our systems. We expect our competitors to continue to improve the design and performance of their existing products and processes and to introduce new products and processes with improved price and performance characteristics. If we are unable to improve or introduce competing products when demanded by the markets, our business will be harmed. In addition, if competitors enter into strategic relationships with leading semiconductor manufacturers covering products similar to those sold or being developed by us, our ability to sell products to those manufacturers may be adversely affected. Finally, if we must lower prices to remain competitive without commensurate cost of goods savings, our gross margins and profitability will be adversely affected.

***We have been dependent on sales to a limited number of large customers; the loss of any of these customers or any reduction in orders from them could materially affect our sales.***

Historically, we have sold a significant portion of our products and services to a limited number of fabricators of semiconductor products. For example, in 2008, our top ten customers accounted for 51.5% of our net sales. None of our customers has entered into a long-term agreement requiring it to purchase our products. Although the composition of the group comprising our largest customers has varied from year to year, the loss of a significant customer or any reduction or delays in orders from any significant customer could adversely affect us. The ongoing consolidation of semiconductor manufacturers may also increase the harmful effect of losing one or more significant customers.

***As a result of our sale of SEN, our Japanese joint venture, SEN will be able to compete against us globally and we will need to develop infrastructure in Japan***

Until March 30, 2009 we owned 50% of the equity of SEN Corporation which held a license from us to make and sell ion implanters in Japan. On that date, we sold our shares in SEN to SHI, and SEN entered into a new License Agreement which allows the two companies to continue to use certain patents and technical information owned by the other to make and sell ion implant systems on a worldwide, royalty-free, perpetual basis. As a result of the sale, SEN is free to make and sell the licensed products worldwide, creating a new global competitor for Axcelis. Axcelis will need to use its established customer relations and infrastructure outside of Japan as well as the technical advantages of the Optima HD and Optima XE to compete against SEN as well as our existing competitors.

Until the Optima developments, we regularly licensed SEN to make and sell our implant systems in Japan. Axcelis is now able to compete against SEN in Japan with all Axcelis products. To do so, Axcelis needs to either expand and develop its own customer relations and infrastructure in Japan or contract with a third party to sell and support implanters in Japan. If Axcelis is not able to compete effectively with SEN, our results of operations may be adversely affected.

***Axcelis is subject to the risks of operating internationally and we derive a substantial portion of our revenues from outside the United States, especially from Asia.***

We are substantially dependent on sales of our products and services to customers outside the United States. International sales, including export sales from our U.S. manufacturing facilities to non-U.S. customers and sales by our non-U.S. subsidiaries and branches, accounted for 64.7% of total revenue in 2008, 67.0% in 2007, and 67.1% in 2006. System shipments to Asian customers represented 50% of total shipment dollars in 2008 in comparison to 64% of total shipment dollars in 2007. We anticipate that international sales will continue to account for a significant portion of our revenue. Because of our dependence upon international sales, our results and prospects may be adversely affected by a number of factors, including:

unexpected changes in laws or regulations resulting in more burdensome governmental controls, tariffs, restrictions, embargoes or export license requirements;

difficulties in obtaining required export licenses;

volatility in currency exchange rates;

political and economic instability, particularly in Asia;

difficulties in accounts receivable collections;

extended payment terms beyond those customarily offered in the United States;

difficulties in managing distributors or representatives outside the United States;

difficulties in staffing and managing foreign subsidiary and branch operations; and

potentially adverse tax consequences.

***We may not be able to maintain and expand our business if we are not able to hire, retain and integrate qualified personnel.***

Our business depends on our ability to attract and retain qualified, experienced employees. There is substantial competition for experienced engineering, technical, financial, sales and marketing personnel in our industry. In particular, we must attract and retain highly skilled design and process engineers. Competition for such personnel is intense, particularly in the Boston metropolitan area, as well as in other locations around the world. If we are unable to retain our existing key personnel, or attract and retain additional qualified personnel, we may from time to time experience levels of staffing inadequate to develop, manufacture and market our products and perform services for our customers. As a result, our growth could be limited or we could fail to meet our delivery commitments or experience deterioration in service levels or decreased customer satisfaction, all of which could adversely affect our financial results.

***Our dependence upon a limited number of suppliers for many components and sub-assemblies could result in increased costs or delays in the manufacture and sale of our products.***

We rely to a substantial extent on outside vendors to manufacture many of the components and sub-assemblies of our products. We obtain many of these components and sub-assemblies from either a sole source or a limited group of suppliers. Accordingly, we may be unable to obtain an adequate supply of required components on a timely basis, on price and other terms acceptable to us, or at all.

In addition, we often quote prices to our customers and accept customer orders for our products before purchasing components and sub-assemblies from our suppliers. If our suppliers increase the cost of components or sub-assemblies, we may not have alternative sources of supply and may not be able to raise the price of our products to cover all or part of the increased cost of components.

The manufacture of some of these components and sub-assemblies is an extremely complex process and requires long lead times. As a result, we have in the past and may in the future experience delays or shortages. If we are unable to obtain adequate and timely deliveries of our required components or sub-assemblies, we may have to seek alternative sources of supply or manufacture these components internally. This could delay our ability to manufacture or to ship our systems on a timely basis, causing us to lose sales, incur additional costs, delay new product introductions and suffer harm to our reputation.

### Our international operations involve currency risk.

Substantially all of our sales are billed in U.S. dollars, thereby reducing the impact of fluctuations in foreign exchange rates on our results. Operating margins of certain foreign operations can fluctuate with changes in foreign exchange rates to the extent revenues are billed in U.S. dollars and operating expenses are incurred in the local functional currency. During the year ended December 31, 2008, approximately 30% of our revenues were derived from foreign operations with this inherent risk. In addition, at December 31, 2008, our operations outside of the United States accounted for approximately 53% of our total assets, the majority of which was denominated in currencies other than the U.S. dollar. Our investment in SEN and our royalty and equity income from SEN are subject to foreign currency exchange risks. From time to time we use forward contracts to hedge the risk of currency fluctuation with respect to SEN royalties for which payment is received in Japanese yen; however, fluctuations in foreign exchange rates could have an adverse affect on our financial results.

***Our stock price has been volatile and you could lose the value of your investment.***

Our stock price has been volatile and has fluctuated significantly to date. The trading price of our stock is likely to continue to be highly volatile and subject to wide fluctuations. Your investment in our stock could lose value. Some of the factors that could significantly affect the market price of our stock include:

actual or anticipated variations in results;

analyst reports or recommendations;

changes in interest rates; and

other events and factors, many of which are beyond our control.

The stock market in general has experienced extreme price fluctuations.

### Our common stock is at risk for delisting from the Nasdaq Global Select Market.

Our common stock is currently listed on the Nasdaq Global Select Market. Nasdaq has requirements that a company must meet in order to remain listed on the Nasdaq Global Select Market. These requirements include maintaining a minimum closing bid price of $1.00 per share, which we have not maintained since October 7, 2008. Nasdaq's has temporarily suspended the minimum closing bid price requirement until July 20, 2009. Although our non-compliance has no effect on the listing of our common stock at this time, there is no guarantee that we will be able to regain compliance with the minimum closing bid requirement. If we fail to meet the continued listing requirements of the Nasdaq Global Select Market and our common stock is delisted, our stock price, as well as the liquidity of our common stock, would be adversely affected as a result. Delisting would also negatively impact our ability to sell our common stock and secure additional financing.

***Our proprietary technology may be vulnerable to efforts by competitors to challenge or design around, potentially reducing our market share.***

We rely on a combination of patents, copyrights, trademark and trade secret laws, non-disclosure agreements and other intellectual property protection methods to protect our proprietary technology. Despite our efforts to protect our intellectual property, our competitors may be able to legitimately ascertain the non-patented proprietary technology embedded in our systems. If this occurs, we may not be able to prevent their use of this technology. Our means of protecting our proprietary rights may not be adequate and our patents may not be sufficiently broad to prevent others from using technology that is similar to or the same as our technology. In addition, patents issued to us have been, or might be challenged, and might be invalidated or circumvented and any rights granted under our patents may not provide adequate protection to us. Our competitors may independently develop similar technology, duplicate features of our products or design around patents that may be issued to us. As a result of these threats to our proprietary technology, we may have to resort to costly litigation to enforce or defend our intellectual property rights. Finally, all patents expire after a period of time (in the U.S., patents expire 20 years from the date of filing of the patent application). Our market share could be negatively impacted by the expiration of a patent which had created a barrier for our competitors.

Axcelis also has agreements with third parties for licensing of patented or proprietary technology with Axcelis as the licensor or the licensee. Termination of license agreements could have an adverse impact on our financial performance or ability to ship products with existing configurations.

***We (or customers that we indemnify) might face intellectual property infringement claims or patent disputes that may be costly to resolve and, if resolved against us, could be very costly to us and prevent us from making and selling our systems.***

From time to time, claims and proceedings have been or may be asserted against us relative to patent validity or infringement matters. We typically agree to indemnify our customers from liability to third parties for intellectual property infringement arising from the use of our products in their intended manner. Therefore, we occasionally receive notification from customers who believe that we owe them indemnification or other obligations related to infringement claims made against the customers by third parties. Our involvement in any patent dispute or other intellectual property dispute or action to protect trade secrets, even if the claims are without merit, could be very expensive to defend and could divert the attention of our management. Adverse determinations in any litigation could subject us to significant liabilities to third parties, require us to seek costly licenses from third parties and prevent us from manufacturing and selling our systems. In addition, infringement indemnification clauses in system sale agreements may require us to take other actions or require us to provide certain remedies to customers who are exposed to indemnified liabilities. Any of these situations could have a material adverse effect on our business results.

***If operations were disrupted at Axcelis' primary manufacturing facility it would have a negative impact on our business.***

We have one primary manufacturing facility, located in Massachusetts. Its operations could be subject to disruption for a variety of reasons, including, but not limited to natural disasters, work stoppages, operational facility constraints and terrorism. Such disruption could cause delays in shipments of products to our customers and could result in cancellation of orders or loss of customers, which could seriously harm our business.

## Properties

As filed, 1,339 characters.

We own one property and lease 53 properties, of which 17 are located in the United States and the remainder are located in Asia and Europe, including offices in Taiwan, Singapore, South Korea, China, Japan, Malaysia, Italy, Germany and France.

Our principal facilities are listed below:

| Facility Location | Principal Use | Square Footage (Owned Leased) |
| --- | --- | --- |
| Beverly, Massachusetts | Manufacturing, research and development, sales/marketing, customer support, advanced process development, product demonstration, customer-training center and corporate headquarters. | 417,000 (owned) |
| Beverly, Massachusetts | Research and development, marketing and customer support | 22,000 (leased) |

Although we are currently operating significantly below normal capacity as a result of the continuing downturn in the industry, we believe that there is no material long-term, excess capacity in our manufacturing facilities, although utilization is subject to change based on customer demand. We believe that our manufacturing facilities and equipment generally are well maintained, in good operating condition, suitable for our purposes, and adequate for our present operations. Our Beverly, Massachusetts and Rockville, Maryland facilities are ISO 9001 and ISO 14001 certified and all other locations are ISO 9001 certified.

## Legal proceedings

As filed, 2,077 characters.

In January 2009, U.S. Bank National Association, the trustee (the "Trustee") under the Indenture relating to the Company's 4.25% Convertible Senior Subordinated Notes (the "Notes"), filed a Complaint in US District Court in the (Southern) District of New York seeking a judgment for the amount due on the Notes, (a total payment of approximately $86.4 million). This litigation relates to the Company's failure to pay the principal and interest due on the Notes on January 15, 2009, discussed in the Management's Discussion and Analysis below. In February 2009, as an inducement to enter into the Share Purchase Agreement dated February 26, 2009 (the "Share Purchase Agreement") with Sumitomo Heavy Industries, Ltd. ("SHI") and SEN Corporation, an SHI and Axcelis Company ("SEN"), the Trustee confirmed in writing that judgment would not be entered in this litigation until after April 13, 2009, during which time it was contemplated that the closing under the Share Purchase Agreement will occur. On March 30, 2009, the sale of our equity holdings in SEN was completed and the Notes were repaid in full. As a result of the payment, the trustee for the Notes will withdraw litigation filed in connection with Axcelis' default on the Notes. See "Business—SEN Corporation, an SHI and Axcelis Company."

The Company is not presently a party to any other litigation that it believes might have a material adverse effect on its business operations. The Company is, from time to time, a party to litigation that arises in the normal course of its business operations. This includes the arbitration initiated by Axcelis in 2006 with SEN to establish a basis for setting the royalty for a single wafer, high current ion implant system known as the SHX. To date, the amount of these unpaid royalties is not material. In January 2009, the Company and SEN agreed to suspend this arbitration indefinitely. On March 30, 2009, in connection with the completion of the sale of SEN, this arbitration will be dismissed by the parties. See "Business—SEN Corporation, an SHI and Axcelis Company."

## Management's discussion and analysis

As filed, 57,574 characters.

Certain statements in "Management's Discussion and Analysis of Financial Condition and Results of Operations" are forward-looking statements that involve risks and uncertainties. Words such as may, will, should, would, anticipates, expects, intends, plans, believes, seeks, estimates and similar expressions identify such forward-looking statements. The forward-looking statements contained herein are based on current expectations and entail various risks and uncertainties that could cause actual results to differ materially from those expressed in such forward-looking statements. Factors that might cause such a difference include, among other things, those set forth under "Liquidity and Capital Resources" and "Risk Factors" and others discussed elsewhere in this Form 10-K. Readers are cautioned not to place undue reliance on these forward-looking statements, which reflect management's analysis only as of the date hereof. We assume no obligation to update these forward-looking statements to reflect actual results or changes in factors or assumptions affecting forward-looking statements, except as may be required by law.

### Overview

Axcelis Technologies, Inc. ("Axcelis,""the Company," "we," "us," or "our"), is a worldwide producer of equipment used in the fabrication of semiconductors. In addition, the Company provides extensive aftermarket service and support, including spare parts, equipment upgrades, and maintenance services to the semiconductor industry. Until March 30, 2009, the Company owned 50% of the equity of a joint venture with Sumitomo Heavy Industries, Ltd. ("SHI") in Japan. This joint venture, which is known as SEN Corporation, an SHI and Axcelis Company ("SEN"), licensed technology from the Company relating to the manufacture of specified ion implantation products and had exclusive rights to manufacture and sell these products in the territory of Japan. SEN is the leading producer of ion implantation equipment in Japan. Upon the sale of the Company's investment in SEN, (See Note 1 to the consolidated financial statements.) Axcelis and SEN entered into a new License Agreement which allows each company to continue to use certain patents and technical information owned by the other to make and sell ion implant systems on a worldwide, royalty-free, perpetual basis. As a result of the sale, SEN is free to make and sell the licensed products worldwide, creating a new global competitor for Axcelis. Axcelis will need to use its established customer relations and infrastructure outside of Japan as well as the technical advantages of the Optima HD and Optima XE to compete against SEN as well as our existing competitors.

Prior to the release of the Optima product line, we regularly licensed SEN to make and sell our implant systems in Japan. Axcelis is now able to compete against SEN in Japan with all Axcelis products. To do so, Axcelis needs to either expand and develop its own customer relations and infrastructure in Japan or contract with a third party to sell and support implanters in Japan. If Axcelis is not able to compete effectively with SEN, our results of operations may be adversely affected.

As discussed in "Liquidity and Capital Resources" below, on January 15, 2009, Axcelis failed to make the required payment of approximately $85 million under an Indenture dated as of May 2, 2006 (the "Indenture") between Axcelis and U.S. Bank National Association, as trustee, relating to the Company's 4.25% Convertible Senior Subordinated Notes. On February 26, 2009, Axcelis, SHI and SEN entered into a Share Purchase Agreement pursuant to which, on March 30, 2009, sold its shares in SEN to SHI for $122.3 million net of advisory fees and expenses. A portion of the net proceeds was used to discharge, in full, the Company's obligations under the Indenture.

The semiconductor capital equipment industry is subject to significant cyclical swings in capital spending by semiconductor manufacturers. Capital spending is influenced by demand for semiconductors and the products using them, the utilization rate and capacity of existing semiconductor manufacturing facilities and changes in semiconductor technology, all of which are outside of our control. As a result, our revenues and gross margins, to the extent affected by increases or decreases in volume, could fluctuate from year to year and period to period. The industry experienced a downturn beginning in the second half of 2007 which extended through 2008 and is expected to continue at least through 2009. Our gross margins are also affected by the introduction of new products. We typically become more efficient in manufacturing products as they mature. Our expense base is largely fixed and does not vary significantly with changes in volume. Therefore, we could experience fluctuations in operating results and cash flows depending on our revenues as driven by the level of capital expenditures by semiconductor manufacturers.

The sizable expense of building, upgrading or expanding a semiconductor fabrication facility is increasingly causing semiconductor companies to contract with foundries to manufacture their semiconductors. In addition, consolidation and partnering within the semiconductor manufacturing industry is increasing. We expect these trends to continue to reduce the number of our potential customers. This growing concentration of Axcelis' customers may increase competitive pricing as higher percentages of our total revenues are tied to the buying decisions of a particular customer or a small number of customers.

In both 2008 and 2007, we incurred net losses. Beginning in 2004, most customers shifted from multi wafer tools to single wafer tools for high current ion implant applications. Because we did not have a single wafer high current product, we have experienced a significant loss of market share which we have yet to regain. We introduced our single wafer Optima HD (for high current applications) product in 2006 and have begun to gain traction with this tool at a number of customers through evaluation arrangements. As of December 31, 2008, revenue of approximately $21.3 million has been recognized on sales of the Optima HD.

During the last four months of 2008, our stock price dropped significantly below book value. Our inability to repay our outstanding debt in January 2009 and our inability to generate sufficient cash flows to support ongoing operations, have adversely impacted our stock price. As mentioned above, we have lost significant market share in high current ion implant (the largest market segment in ion implant) over the past several years. We believe that we now have competitive products in the high current and high energy ion implant market segments, as well as dry strip. However, challenging market conditions have severely limited our ability to increase sales and market share. Additionally, in concert with the market uncertainty resulting from the current credit crisis, we believe that the economic downturn characterized by higher unemployment, lower corporate earnings, lower business investment and lower consumer spending, has severely impacted many technology manufacturers and has significantly lowered the demand for our products. The Company believes that a combination of these factors accounts for the difference between our stock trading price and our book value.

In addition, the estimated future total available market for our products, as published by independent third party industry analysts, was significantly revised downward in the fourth quarter and we experienced a 26% decline (as compared to aftermarket revenue in the third quarter of 2008) in our aftermarket business, reflecting significant declines in manufacturers' capacity utilization. This fourth quarter contraction in the industry led us to revise our short term and long term financial forecasts. As a result, we recorded charges in the fourth quarter of 2008 for the impairment of intangible and long-lived assets of $46.9 million, impairment of goodwill of $42.1 million, and excess inventory of $23.2 million.

Continuing capital market upheavals may have an adverse effect on us because we are dependent on customer behavior. Our revenues would likely continue to decline in such circumstances and our profit margins would continue to erode. In addition, as a result of extreme prolonged events, such as the global credit crisis, we could incur significant losses. Factors such as consumer spending, business investment, and the volatility and strength of the capital markets all affect the business and economic environment, and ultimately, the amount of profitability of our business. Continuing adverse trends in the economy would likely affect our earnings negatively and have a material adverse effect on our business, results of operations and financial condition.

Axcelis' liquidity is affected by many factors. Some of these factors are based on normal operations of the business, including acceptance of the Optima product line, and others relate to the uncertainties of global economies, including the availability of credit, and the state of the semiconductor equipment industry. Although our cash requirements fluctuate based on the timing and extent of these factors, we believe that based on our current market, revenue and expense forecast our existing cash and cash equivalents and the net proceeds of the sale of our SEN investment will be sufficient to satisfy our anticipated cash requirements at least through 2009. If the downturn in the semicap equipment industry continues into 2010 and our operating performance does not improve significantly as compared to the fourth quarter of 2008, it could have a significant effect on our liquidity and our ability to continue in the future as a going concern.

Operating results for the years presented are not necessarily indicative of the results that may be expected for future interim periods or years as a whole.

### Critical Accounting Estimates

Management's discussion and analysis of our financial condition and results of operations are based upon Axcelis' consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of these financial statements requires management to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosure of contingent assets and liabilities. On an on-going basis, we evaluate our estimates, including those related to revenue recognition, income taxes, accounts receivable, inventory and warranty obligations. Management's estimates are based on historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.

We believe the following accounting policies are critical in the portrayal of our financial condition and results of operations and require management's most significant judgments and estimates in the preparation of our consolidated financial statements.

#### Revenue Recognition

Our revenue recognition policy involves significant judgment by management. As described below, we consider a broad array of facts and circumstances in determining when to recognize revenue, including contractual obligations to the customer, the complexity of the customer's post delivery acceptance provisions, payment history, customer creditworthiness and the installation process. In the future, if the post delivery acceptance provisions and installation process become more complex or result in a materially lower rate of acceptance, we may have to revise our revenue recognition policy, which could delay the timing of revenue recognition.

We recognize revenue based on guidance provided in SEC Staff Accounting Bulletin No. 104, *Revenue Recognition*. Axcelis' revenue transactions include sales of products under multiple element arrangements. Revenue under these arrangements is allocated to each element, except systems, based upon its estimated fair market value, in accordance with the provisions of EITF 00-21, *Accounting for Revenue Arrangements with Multiple Deliverables* ("EITF 00-21"). The amount of revenue allocated to systems is calculated on a residual method. Under this method, the total value of the arrangement is allocated first to the undelivered elements, with the residual amount being allocated to product revenue.

The value of the undelivered elements includes (a) the greater of (i) the fair value of the installation or (ii) the portion of the sales price that will not be received until the installation is completed (the "retention") plus (b) the fair value of all other undelivered elements. The amount allocated to installation is based upon the fair value of the service performed, including labor, which is based upon the estimated time to complete the installation at hourly rates, and material components. The fair value of all other undelivered elements is based upon the price charged when these elements are sold separately. Product revenue for products which have demonstrated market acceptance (legacy products), is generally recognized upon shipment provided title and risk of loss has passed to the customer, evidence of an arrangement exists, prices are contractually fixed or determinable, collection is reasonably assured through historical collection results and regular credit evaluations, and there are no uncertainties regarding customer acceptance. Revenue from installation services is recognized at the time formal acceptance is received from the customer or, for certain customers, when both the formal acceptance and retention payment have been received. Revenue for other elements is recognized at the time products are shipped or the related services are performed.

We generally recognize systems revenue for products which have demonstrated market acceptance (legacy products), at the time of shipment because the customer's post-delivery acceptance provisions and installation process have been established to be routine, commercially inconsequential and perfunctory. The majority of Axcelis' systems are designed and tailored to meet the customer's specifications, as outlined in the contract between the customer and Axcelis, which may be the Axcelis standard specification. To ensure that the customer's specifications are satisfied, many customers request that new systems be tested at Axcelis' facilities prior to shipment, normally with the customer present, under conditions that substantially replicate the customer's production environment and the customer's criteria are confirmed to have been met. Customers of mature products generally do not require pre-shipment testing. We believe the risk of failure to complete a system installation is remote. Should an installation not be completed successfully, the contractual provisions do not provide for forfeiture, refund or other purchase price concession beyond those prescribed by the provisions of the Uniform Commercial Code applicable generally to such transactions.

For initial shipments of systems with new technologies or in the small number of instances where Axcelis is unsure of meeting the customer's specifications or obtaining customer acceptance upon shipment of the system, Axcelis will defer the recognition of systems revenue and related costs until written customer acceptance of the system is obtained. This deferral period is generally within twelve months of shipment.

Revenue related to maintenance and service contracts is recognized ratably over the duration of the contracts, or based on parts usage, where appropriate. Revenue related to service hours is recognized when the services are performed.

Royalty revenue is primarily earned under the terms of our license agreement with SEN. Royalty revenue is recorded at the time SEN notifies the Company that royalties have been earned.

#### Goodwill

In accordance with SFAS No. 142, *Goodwill and Other Intangible Assets*, we review goodwill for impairment at least annually or more often if there are indicators of impairment present. Our annual test is performed during the fourth quarter of each year. As a result of declining economic conditions, along with our stock price below book value, we also performed an interim test at September 30, 2008, concluding that goodwill was not impaired. The provisions of SFAS 142 require that a two-step impairment test be performed for goodwill. In the first step, we compare the fair value of the reporting unit to which goodwill has been allocated to its carrying value. If the fair value of the reporting unit exceeds the carrying value of the net assets assigned to that unit, goodwill is considered not impaired and we are not required to perform further testing. If the carrying value of the net assets assigned to the reporting unit exceeds the fair value of the reporting unit, then we must perform the second step of the impairment test and determine the implied fair value of the reporting unit's goodwill. If the carrying value of a reporting unit's goodwill exceeds its implied fair value, then we would record an impairment loss equal to the difference.

Our annual test was performed during the fourth quarter of 2008. During this period, the significant decline in our stock price experienced at the end of the third quarter continued through the end of the fourth quarter and beyond, resulting in a sustained market capitalization well below book value. In addition, the estimated future total available market for our products, as published by independent third party industry analysts, was significantly revised downward in the fourth quarter and we experienced a 26% decline (as compared to aftermarket revenues in the third quarter of 2008) in our aftermarket business, reflecting significant declines in manufacturers' capacity utilization. This fourth quarter contraction in the industry led us to revise our short-term and long-term financial forecast. Our updated long-term financial forecast represents the best estimate that our management has at this time and we believe that its underlying assumptions are reasonable.

SFAS 142 requires that we measure goodwill for impairment at the reporting unit level. The Company has one operating segment as defined by SFAS 131 and disclosed in Note 17 to the consolidated financial statements. At December 31, 2008, goodwill was evaluated for impairment at the component level, which is one level below the operating segment. As such, the Cleaning and Curing product line was considered the reporting unit, for purposes of evaluating goodwill for impairment.

The impairment analysis utilized a discounted cash flow method and assumed a cash flow period of 10 years based on management's updated projections for 3 years and an additional 7 years based on additional projections and historical performance. The underlying assumptions in this 10 year forecast contemplate increased market share above current levels, improvement to gross margins while managing operating expenses at current levels. We utilized the Gordon Growth Method based upon a discount rate of 18% less the estimated growth rate of 3.0%. A variance in these assumptions could have a significant impact on the assessment as to whether goodwill may or may not be impaired.

Based on the result of our impairment assessment of goodwill, we determined that the carrying value of our Cleaning and Curing product line exceeded its estimated fair value. Therefore, we performed the second step of the impairment test to determine the implied value of goodwill. We allocated the estimated fair value of our Cleaning and Curing product line as determined in the first step to recognized and unrecognized net assets, including allocations to intangible assets. The result of our analysis indicated that there would be no remaining implied value attributable to goodwill in our Cleaning and Curing product line and accordingly, we recorded a goodwill impairment charge of $42.1 million as of December 31, 2008.

Estimates and assumptions used in the determination of fair value for the Cleaning and Curing product line include revenue growth rates and operating margins. These are used to calculate projected future cash flows, risk adjusted discount rates, future economic and market conditions and determining appropriate market comparables. We believe these assumptions to be reasonable but actual conditions are unpredictable and inherently uncertain. Actual future results may differ from out estimates.

#### Impairment of Intangible and Long-Lived Assets

In accordance with SFAS No. 144, *Accounting for the Impairment or Disposal of Long-Lived Assets*, we assess the carrying value of intangible and long-lived assets for impairment whenever events or changes in circumstances indicate that the carrying value may not be recoverable. As a result of declining economic conditions, along with our stock price below book value, we performed an interim test at September 30, 2008, concluding that intangible and long-lived assets were not impaired.

The significant decline in our stock price experienced at the end of the third quarter continued through the end of the fourth quarter and beyond, resulting in a sustained market capitalization well below book value. In addition, the estimated future total available market for our products, as published by independent third party industry analysts, was significantly revised downward in the fourth quarter and we experienced a 26% decline (as compared to aftermarket revenue in the third quarter of 2008) in our aftermarket business, reflecting significant declines in manufacturers' capacity utilization.

This fourth quarter contraction in the industry led us to revise our short-term and long-term financial forecasts. Our updated financial forecast represents the best estimate that our management has at this time and we believe that its underlying assumptions are reasonable. Recoverability is measured by a comparison of the assets' carrying amount to their expected future undiscounted net cash flows. If such assets are considered to be impaired, the impairment is measured based on the amount by which the carrying value exceeds its fair value. Fair value was based on a probability weighted cash flow forecast, discounted at a rate commensurate with the risks involved in achieving the forecasted cash flows. See notes 2, 6, 8, and 9 to the accompanying financial statements for further detail on impairment of intangible and long-lived assets.

The estimates of future operating results and cash flows are derived from our updated long-term financial forecast. This updated long-term forecast represents the best estimate that we have at this time and we believe that its underlying assumptions are reasonable based primarily on current product performance and customer acceptance. This forecast relies primarily on market assumptions and market share we expect to achieve. However, actual performance in the near-term and longer-term could be materially different from these forecasts, which could impact future estimates of undiscounted cash flows and may result in the impairment of the carrying amount of long-lived assets. This could be caused by events such as strategic decisions made in response to economic and competitive conditions, the impact of the economic environment on our customer base, or a material negative change in its relationships with significant customers. Accordingly, we will continue to perform this analysis no less than quarterly for the foreseeable future.

As a result of this review, we recorded a total intangible assets and long-lived asset impairment charge of $46.9 million during the fourth quarter ended December 31, 2008. This charge consisted of intangibles of $8.3 million, certain other assets of $21.1 million and property, plant and equipment of $17.5 million.

#### Accounts Receivable—Allowance for Doubtful Accounts

Axcelis records an allowance for doubtful accounts for estimated losses resulting from the inability of its customers to make required payments. If the financial condition of Axcelis' customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be necessary.

#### Inventory—Allowance for Excess and Obsolescence

Axcelis records an allowance for estimated excess and obsolete inventory. The allowance is determined using management's assumptions of materials usage, based on estimates of forecasted and historical demand and market conditions. If actual market conditions become less favorable than those projected by management, additional inventory write-downs may be required.

With the downward revisions in the fourth quarter of the estimated future total available market for our products, we revised our revenue forecasts through 2010. Based on the revised forecasts and expected inventory usages over the next two years, we increased the excess and obsolete inventory reserve by $23.2 million as of December 31, 2008. Although the Company makes every effort to ensure the accuracy of our forecasts or product demand and pricing assumptions, any significant unanticipated changes in demand, pricing, or technical developments would significantly impact the value of our inventory and our reported operating results. In the future, if the Company finds that estimates are too optimistic and determine that inventory needs to be written down further, the Company will recognize such costs in our cost of revenue at the time of such determination. Conversely, if we find our estimates are too pessimistic and we subsequently sell product that has previously been written down, our gross margin in that period will be favorably impacted.

#### Product Warranty

Axcelis offers a one to three year product warranty, the terms and conditions of which vary depending upon the product sold. For all systems sold, we accrue a liability for the estimated cost of standard warranty at the time of system shipment and defer the portion of systems revenue attributable to the fair value of non-standard warranty. Costs for non-standard warranty are expensed as incurred. Factors that affect our warranty liability include the number of installed units, historical and anticipated product failure rates, material usage and service labor costs. We periodically assess the adequacy of our recorded liability and adjust the amount as necessary.

### Results of Operations

The following table sets forth our results of operations as a percentage of total revenue for the periods indicated:

| Revenue: | Years Ended December 31, 2008 | 2007 | 2006 |
| --- | ---: | ---: | ---: |
| Product | 77.6% | 84.9% | 86.3% |
| Service | 20.7% | 13.6% | 11.7% |
| Royalties, primarily from SEN | 1.7% | 1.5% | 2.0% |
| Total revenue | 100.0% | 100.0% | 100.0% |
| Cost of revenue: |  |  |  |
| Product | 64.5% | 53.6% | 50.7% |
| Services | 10.5% | 8.6% | 7.8% |
| Total cost of revenue | 75.0% | 62.2% | 58.5% |
| Gross profit | 25.0% | 37.8% | 41.5% |
| Operating expenses: |  |  |  |
| Research and development | 25.3% | 17.8% | 15.7% |
| Sales and marketing | 17.8% | 12.3% | 9.9% |
| General and administrative | 17.2% | 10.3% | 10.1% |
| Impairment of goodwill | 16.8% | 1.2% | 0.0% |
| Impairment of intangibles and long lived assets | 18.8% | 0.0% | 0.0% |
| Amortization of intangible assets | 1.1% | 0.7% | 0.5% |
| Restructuring charges | 2.7% | 0.6% | 0.1% |
| Total operating expenses | 99.7% | 42.9% | 36.3% |
| Income (loss) from operations: | (74.7)% | (5.1)% | 5.2% |
| Other income (expense): |  |  |  |
| Equity income (loss) of SEN | (1.5)% | 2.6% | 4.2% |
| Interest income | 0.6% | 1.2% | 1.8% |
| Interest expense | (2.6)% | (1.6)% | (1.9)% |
| Other, net | (0.1)% | 0.0% | (0.1)% |
| Total other income (expense) | (3.6)% | 2.2% | 4.0% |
| Income (loss) before income taxes | (78.3)% | (2.9)% | 9.2% |
| Provision for/(benefit) from income taxes | 0.3% | (0.1)% | 0.4% |
| Net income (loss) | (78.6)% | (2.8)% | 8.8% |

28

### Year ended December 31, 2008 in comparison to the year ended December 31, 2007

### Revenue

Revenues declined significantly in 2008 compared to 2007 and based on current industry projections are expected to decline further in 2009. The continuing decline in market conditions is expected to have a negative impact on both revenues from system sales and revenues from the Company's aftermarket business.

#### Product

Product revenue, which includes systems sales, sales of spare parts and product upgrades, was $194.3 million or 77.6% of revenue in 2008, compared with $343.6 million, or 84.9% of revenue in 2007. Product revenue in 2007 and 2008 has been reduced by our loss of high current market share, as discussed above. The decline in product revenue in 2008 is also attributable to a weakening semiconductor market and a related decrease in capital spending by semiconductor manufacturers. In addition, a decrease in capacity expansion at 200mm manufacturing facilities (a portion of which relates to the overall decline in the semiconductor capital equipment market) decreased revenue from system sales by $149.3 million for 2008.

Approximately 41% of systems revenue in 2008 was from sales of 200mm products and 59% was from sales of 300mm products, compared with 31.6% and 68.4% for sales of 200mm products and 300mm products in 2007, respectively. Despite our results, general market trends for the past several years highlight a growth in sales toward 300mm products and a decrease in expansion of facilities using 200mm products.

A portion of our revenue from system sales is deferred until installation and other services related to future deliverables are performed. The total amount of deferred revenue at December 31, 2008 and 2007 was $14.4 million and $40.5 million, respectively. The decline was mainly due to the decrease in overall systems revenue in 2008 and the recognition of $13.2 million of revenue deferred in 2007 related to the rollout of the Optima HD product line.

#### Service

Service revenue, which includes the labor component of maintenance and service contracts and fees for service hours provided by on-site service personnel, was $51.9 million, or 20.7% of revenue for 2008, compared with $55.2 million, or 13.6% of revenue, for 2007. Although service revenue should increase with the expansion of the installed base of systems, it can fluctuate period to period based on capacity utilization at customers' manufacturing facilities, which affects the need for equipment service.

#### Royalties

Royalty revenue was $4.1 million or 1.7% of revenue for 2008, compared with $6.1 million, or 1.5% of revenue for 2007. Royalties are earned primarily under the terms of our license agreement with SEN. Changes are mainly attributable to fluctuations in SEN sales volume based on demand for equipment by Japanese semiconductor manufacturers and the timing of shipments in Japan. In connection with the sale of the Company's investment in SEN (see Note 1 to the consolidated financial statements.) subsequent to March 31, 2009 SEN will have no obligation to pay royalties to the Company.

#### Ion Implant

Revenue from sales of ion implantation products and service accounted for $204.9 million, or 81.9% of total revenue in 2008, compared with $304.5 million, or 75.2%, of total revenue in 2007. The decline was due to the factors discussed above. Annual revenue from the sale of ion implantation products and service typically average from 70% to 80% of total revenues.

#### Aftermarket

The Company's product revenues include sales of spare parts and product upgrades as well as complete systems. We refer to the business of selling spare parts and product upgrades, combined with the sale of maintenance labor and service contracts and service hours as the "aftermarket" business. The revenue from our aftermarket business was $143.0 million for 2008, compared to $170.9 million for 2007. Aftermarket revenue generally increases with expansion of the installed base of systems but can fluctuate period to period based on capacity utilization at customers' manufacturing facilities which affects the sale of spare parts and demand for equipment service. The estimated future total available market for our products, as published by independent third party industry analysts, was significantly revised downward in the fourth quarter and we experienced a 26% decline (as compared to aftermarket revenues in the third quarter of 2008), in our aftermarket business, reflecting significant declines in manufacturers' capacity utilization. The decline of aftermarket revenue has continued through the first quarter of 2009.

### Gross Profit

#### Product

Gross profit from product revenue was 17.0% for 2008, compared to 36.8% for 2007, a decrease of 19.8%. Approximately 12% of the decrease pertains to an additional reserve of $23.2 million for excess inventory. The remaining 7.8% decrease is attributable to the significantly lower system sales volume (14.9%) during the year. These amounts were offset by the favorable impact of an increased mix of parts and upgrade revenue at higher margins (7.1%).

#### Service

Gross profit from service revenue was 49.2% for 2008, compared to 36.8% for 2007. The increase in gross profit is attributable to service pricing increases enacted during the first quarter of 2008 driving a higher mix of profitable service support agreements and lower expenses against fixed price support contracts.

### Research and Development

Research and development expense was $63.3 million in 2008, a decrease of $8.7 million, or 12%, compared with $72.0 million in 2007. The decrease was driven primarily by completion of Optima and Integra platform development: decreased professional fee expenses ($3.4 million), decreased payroll costs ($4.8 million) and decreased project material costs ($1.3 million), offset by increased development asset amortization and depreciation costs ($0.8 million).

Research and development expense was attributable to the following activities for 2008: 49% for new product development, 32% for improvement of existing products, and 19% for product testing.

### Sales and Marketing

Sales and marketing expense was $44.6 million in 2008, a decrease of $5.4 million, or 10.8%, compared with $50.0 million in 2007. The decrease was driven primarily by decreased payroll costs ($3.7 million), decreased professional services ($0.3 million), decreased commissions expenses ($0.4 million), decreased travel costs ($1.2 million), decreased marketing communications costs ($0.4 million) and decreased training and supplies costs ($0.5 million), offset by increased costs related to evaluation system support for our Optima platform ($1.1 million).

### General and Administrative

General and administrative expense was $43.1 million in 2008, an increase of $1.4 million, compared with $41.7 million in 2007. The increase was driven primarily by increased variable compensation costs of ($1.1 million) and increased professional fee expenses ($2.4 million) offset by lower payroll costs of ($1.4 million), lower stock compensation costs ($0.4 million) and lower travel costs ($0.3 million).

### Impairment of Goodwill

Our annual test was performed during the fourth quarter of 2008. During this period, the significant decline in our stock price experienced at the end of the third quarter continued through the end of the fourth quarter and beyond, resulting in a sustained market capitalization well below book value. In addition, the estimated future total available market for our products, as published by independent third party industry analysts, was significantly revised downward in the fourth quarter and we experienced a 26% decline (as compared to aftermarket revenue in the third quarter of 2008), in our aftermarket business, reflecting significant declines in manufacturers' capacity utilization. This fourth quarter contraction in the industry led us to revise our short-term and long-term financial forecast. Our updated long-term financial forecast represents the best estimate that our management has at this time and we believe that its underlying assumptions are reasonable.

Based on the result of our impairment assessment of goodwill, we determined that the carrying value of our Cleaning and Curing product line exceeded its estimated fair value. Therefore, we performed the second step of the impairment test to determine the implied value of goodwill. Specifically, we allocated the estimated fair value of our Cleaning and Curing product line as determined in the first step to recognized and unrecognized net assets, including allocations to intangible assets such as developed technologies, in-process research and development, customer relationships and trade names. The result of our analysis indicated that there would be no remaining implied value attributable to goodwill and accordingly, we wrote off the entire book value of goodwill of $42.1 million as of December 31, 2008.

During the three month period ended September 30, 2007, we elected to discontinue future development of the RTP and Curing product lines. Based on that business decision, the forecast of future cash flows was revised and, as such, in September 2007 a goodwill impairment loss of $4.7 million was recorded. The fair value of these product lines was estimated using the expected present value of future cash flows.

### Impairment of Intangibles and Long-Lived Assets

The significant decline in our stock price experienced at the end of the third quarter continued through the end of the fourth quarter and beyond, resulting in a sustained market capitalization well below book value. In addition, the estimated future total available market for our products, as published by independent third party industry analysts, was significantly revised downward in the fourth quarter and we experienced a 26% decline (as compared to aftermarket revenue in the third quarter of 2008), in our aftermarket business, reflecting significant declines in manufacturers' capacity utilization. This fourth quarter contraction in the industry led us to revise our short-term and long-term financial forecast. Our updated long-term financial forecast represents the best estimate that our management has at this time and we believe that its underlying assumptions are reasonable.

As a result of our review of the recoverability of intangibles and long-lived assets we recorded an impairment charge of $46.9 million consisting of the entire net book value of intangible assets of $8.3 million, certain other assets of $21.1 million, and property, plant and equipment of $17.5 million. There was no impairment charge related to intangibles or long-lived assets in 2007.

### Stock-based Compensation Expense

Total stock-based compensation expense related to stock options, restricted stock, restricted stock units and the Employee Stock Purchase Plan for the years ended December 31, 2008 and 2007 was $4.7 million and $5.5 million, respectively.

See Note 14 to our Consolidated Financial Statements contained in Item 15 of this Annual Report on Form 10-K for further information regarding our adoption of SFAS 123R.

### Restructuring

In May and October of 2008, we implemented a reduction in force to further reduce costs to mitigate deteriorating industry fundamentals. These reductions in force resulted in restructuring charges to expense of $3.5 million and $3.4 million respectively for separation and outplacement costs. See Note 11 to our Consolidated Financial Statements contained in Item 15 of this Annual Report on Form 10-K for further information regarding our 2008 restructuring.

Changes in our restructuring liability, included in amounts reported as other current liabilities, are as follows:

*(in thousands)*

|  | Severance |
| --- | ---: |
| Balance at December 31, 2007 | $916 |
| Restructuring expense | 6,873 |
| Cash payments | (7,043) |
| Balance at December 31, 2008 | $746 |

### Other Income (Expense)

Equity loss attributable to SEN was $3.7 million for 2008. This is compared to equity income attributable to SEN of $10.4 million for 2007. Fluctuations in equity income from SEN reflect changes in its sales volume and net income resulting from demand changes in the Japanese semiconductor market, and the timing of shipments in Japan. In connection with the sale of the Company's investment in SEN (see Note 1 to the consolidated financial statements.) subsequent to March 31, 2009 the Company will no longer record equity income or loss from SEN.

Interest income of $1.6 million for 2008, primarily relates to interest earned on cash, cash equivalents and short-term investments. Interest income decreased by $3.4 million from 2007, due primarily to lower average cash balances.

Interest expense of $6.7 million in 2008, an increase of $0.3 million from 2007, relates primarily to the outstanding convertible senior subordinated notes which have an effective yield to maturity of 8%. The increase in interest expense in 2008 relates to the accretion of the premium due at maturity.

### Income Taxes (Credits)

We incur income tax expense relating principally to operating results of foreign entities in jurisdictions, principally in Asia, where we earn taxable income. We have significant net operating loss carryforwards in the United States and certain foreign jurisdictions, principally Europe, and, as a result, we do not currently pay significant income taxes in those jurisdictions and we do not recognize the tax benefit for such losses as discussed in Note 18 to the consolidated financial statements. Accordingly, our effective income tax rate is not meaningful.

### Year ended December 31, 2007 in comparison to the year ended December 31, 2006

### Revenue

#### Product

Product revenue, which includes systems sales, sales of spare parts and product upgrades, was $343.6 million or 84.9% of revenue in 2007, compared with $398.4 million, or 86.3% of revenue in 2006. Product revenue in 2006 and 2007 was reduced by our loss of high current market share. The decline in product revenue in 2007 was also attributable to a weakening semiconductor market and a related decrease in capital spending by semiconductor manufacturers. In addition a decrease in capacity expansion at 200mm manufacturing facilities (a portion of which relates to the overall decline in the semiconductor capital equipment market) decreased revenue from system sales by $44.6 million for 2007.

Approximately 31.6% of systems revenue in 2007 was from sales of 200mm products and 68.4% was from sales of 300mm products, compared with 42.2% and 57.8% for sales of 200mm products and 300mm products in 2006, respectively. This followed overall market trends for the past several years which show the growth in sales toward 300mm products and a decrease in expansion of facilities using 200mm products.

A portion of our revenue from system sales is deferred until installation and other services related to future deliverables are performed. The total amount of deferred revenue at December 31, 2007 and 2006 was $40.5 million and $33.9 million, respectively.

#### Service

Service revenue, which includes the labor component of maintenance and service contracts and fees for service hours provided by on-site service personnel, was $55.2 million, or 13.6% of revenue for 2007, compared with $54.1 million, or 11.7% of revenue, for 2006.

#### Royalties

Royalty revenue was $6.1 million, or 1.5% of revenue for 2007, compared with $9.2 million, or 2.0% of revenue for 2006. Royalties are primarily earned under the terms of our license agreement with SEN. Changes are mainly attributed to fluctuations in SEN sales volume based on demand for equipment by Japanese semiconductor manufacturers and the timing of shipments in Japan.

#### Ion Implant

Revenue from sales of ion implantation products and services accounted for $304.5 million or 75.2% of total revenue in 2007, compared with $342.9 million, or 74.3%, of total revenue in 2006.

#### Aftermarket

The revenue from our aftermarket business was $170.9 million for 2007, compared to $176.2 million for 2006. Aftermarket revenue generally increases with expansion of the installed base of systems but can fluctuate period to period based on capacity utilization at customers' manufacturing facilities which affects the sale of spare parts and demand for equipment service.

### Gross Profit

#### Product

Gross profit from product revenue was 36.8% for 2007, compared to 41.2% for 2006. The decrease in gross profit from product revenues is attributable to a decline in product revenue and the related under absorption of manufacturing overhead (approximately 3.2%) and lower margins on new product revenue (approximately 2.7%), offset by the favorable impact of a higher mix or upgrades and proprietary spare parts (approximately 1.4%).

#### Service

Gross profit from service revenue was 36.8% for 2007, compared to 33.7% for 2006. The increase in gross profit for 2007 is attributable to improved utilization of the fixed service labor cost base.

### Research and Development

Research and development expense was $72.0 million in 2007, a decrease of $.4 million, or 0.6%, as compared with $72.4 million in 2006. The decrease was driven primarily by decreased variable compensation costs ($2.5 million), decreased professional fee expenses ($1.3 million) and decreased payroll costs ($0.6 million), offset by increased project material costs ($2.3 million) and increased development asset amortization and depreciation costs ($2.5 million).

Research and development expense was attributable to the following activities for 2007: 57% for new product development, 28% for improvement of existing products, and 15% for product testing.

### Sales and Marketing

Sales and marketing expense was $50.0 million in 2007, an increase of $4.5 million, or 9.9%, as compared with $45.5 million in 2006. This increase was driven primarily by increased payroll costs ($2.6 million), increased costs related to evaluation system support of our Optima platform ($2.6 million) and stock compensation cost ($0.6 million), offset by lower commissions expense ($1.5 million).

### General and Administrative

General and administrative expense was $41.7 million in 2007, a decrease of $4.9 million, or 10.5%, as compared with $46.6 million in 2006. This increase was driven primarily by lower variable compensation costs ($4.6 million), lower depreciation costs ($0.7 million), lower stock compensation costs ($0.6 million) and lower lease, travel, utilities, sales tax and insurance expense ($0.4 million) offset by increased professional fee expenses ($0.9 million) and increased payroll related costs ($0.5 million).

### Impairment of Goodwill

During the three month period ended September 30, 2007, we elected to discontinue future development of the RTP and Curing product lines. Based on that business decision, the forecast of future cash flows was revised and, as such, in September 2007 a goodwill impairment loss of $4.7 million was recorded. The fair value of these product lines was estimated using the expected present value of future cash flows.

### Stock-based Compensation Expense

During the first quarter of fiscal 2006, we adopted the Financial Accounting Standards Board's Statement of Financial Accounting Standards No. 123 (revised 2004), *Share-Based Payment,* or SFAS 123R, using the modified prospective application method. The effect of adopting SFAS 123R was to reduce net income for the year ended December 31, 2006 by $3.3 million ($0.03 on basic and diluted earnings per share).

Total stock-based compensation expense related to stock options, restricted stock, restricted stock units and the Employee Stock Purchase Plan for the year ended December 31, 2007 and 2006 was $5.5 million, respectively.

See Note 14 to our Consolidated Financial Statements contained in Item 15 of this Annual Report on Form 10-K for further information regarding our adoption of SFAS 123R.

### Restructuring

In October of 2007, we implemented a reduction in force related to planned actions taken by management to control costs and improve the focus of its operations in order to sustain future profitability and conserve cash. This reduction in force was expected to result in a total charge to expense of approximately $3.1 million related to separation and outplacement costs, of which $2.5 million was recorded in the statement of operations at December 31, 2007.

Changes in our restructuring liability, included in amounts reported as other current liabilities, are as follows:

*(in thousands)*

|  | Severance | Leases | Total |
| --- | ---: | ---: | ---: |
| Balance at December 31, 2006 | $— | $1,124 | $1,124 |
| Restructuring Expense | 2,506 | — | 2,506 |
| Cash Payments | (1,590) | (1,124) | (2,714) |
| Balance at December 31, 2007 | $916 | $— | $916 |

The 2006 lease restructuring liability relates to the consolidation of our Rockville, Maryland operations into its headquarters and manufacturing facility located in Beverly, Massachusetts during 2005. These leases were paid over the remaining lease term, which ended December 31, 2007.

### Other Income (Expense)

Equity income attributable to SEN was $10.4 million in 2007 compared to $19.3 million in 2006. Fluctuations in equity income from SEN reflect changes in its sales volume and net income resulting from demand changes in the Japanese semiconductor market, and the timing of shipments in Japan.

Interest income of $5.0 million for 2007 primarily relates to interest earned on cash, cash equivalents and short-term investments. Interest income decreased by $3.4 million from 2006 due primarily to lower average cash balances, resulting from the repayment of $74.2 million of long-term debt in January 2007.

Interest expense of $6.4 million in 2007, a decrease of $2.7 million from 2006, relates primarily to the outstanding convertible senior subordinated notes which have an effective yield to maturity of 8%. The decrease in interest expense in 2007 is a direct result of the repayment of $74.2 million of long-term debt in January 2007.

### Income Taxes (Credits)

Income tax expense for 2007 was $0.4 million. In 2007, we determined that certain tax reserves relating to a previous tax year were no longer required. As a result, we recorded an adjustment to reduce income tax expense by $1.2 million. In addition, during the year we recorded tax benefits related to the realization of foreign tax credits, which we expected to recover approximately $1.2 million in tax refunds of amounts paid for alternative minimum taxes remitted for tax years 2004 through 2006.

### Liquidity and Capital Resources

Capital expenditures were $3.4 million and $10.4 million for the years ended December 31, 2008 and 2007, respectively. We have no significant capital projects planned for 2009 and total capital expenditures for 2009 are projected to be less than $2.0 million. Future capital expenditures beyond 2009 will depend on a number of factors, including the timing and rate of expansion of our business and our ability to generate cash to fund them.

The following represents our contractual obligations and commercial commitments as of December 31, 2008 (in thousands):

| Contractual Obligations | Total | Payments Due by Period 2009 | 2010-2011 | 2011-2012 | Thereafter |
| --- | ---: | ---: | ---: | ---: | ---: |
| Short-term debt (including interest) | $84,937 | $84,937 | $— | $— | $— |
| Purchase order commitments | 8,811 | 8,811 | — | — | — |
| Operating leases | 9,175 | 4,963 | 2,802 | 749 | 661 |
|  | $102,923 | $98,711 | $2,802 | $749 | $661 |

| Other Commercial Commitments | Total | Amount of Commitment Expiration by Period 2009 | 2010-2011 | 2011-2012 | Thereafter |
| --- | ---: | ---: | ---: | ---: | ---: |
| Standby letters of credit | $8,654 | $8,654 | $— | $— | $— |
| Guarantees | 3,511 | 3,511 | — | — | — |
|  | $12,165 | $12,165 | $— | $— | $— |

We have no off-balance sheet arrangements at December 31, 2008.

Our liquidity is affected by many factors. Some of these relate specifically to the operations of our business, for example, the rate of acceptance of the Optima product line, and others relate to the uncertainties of global economies, including the availability of credit, and the condition of the overall semiconductor equipment industry.

During 2008, we experienced negative cash flows from operations. Cash used for operations in 2008 was predominately driven by the net loss from operations attributable to the depressed semiconductor equipment market and the resultant decline in revenues. Cash and cash equivalents at December 31, 2008 were $37.7 million, compared to $83.9 million at December 31, 2007. The $46.2 million decrease in cash and cash equivalents is mainly attributable to cash used by operations ($48.8 million) and capital expenditures ($3.4 million) offset by a decrease of restricted cash balances of $9.6 million. We also anticipate significant cash outflows from operations throughout 2009. However, we believe that based on our current market, revenue and expense forecasts our existing cash and cash equivalents and the net proceeds from the sale of our SEN investment will be sufficient to satisfy our anticipated cash requirements at least through 2009. Our 2009 forecast reflects revenue and gross margins, excluding nonrecurring charges, consistent with amounts realized in the fourth quarter of 2008 and operating expense levels that reflect cost saving initiatives implemented during 2008. If the downturn in the semicap equipment industry continues into 2010 and our operating performance does not improve significantly as compared to the fourth quarter of 2008, it could have a significant effect on our liquidity and our ability to continue in the future as a going concern.

Our 2009 cash position will also be driven by reductions in working capital, as inventory for the Optima product line is converted into revenue.

On March 30, 2009, pursuant to the Share Purchase Agreement with SHI and SEN, we sold all of our common shares in SEN to SHI for net proceeds of $122.3 million. We used $86.4 million of that amount to pay in full our outstanding obligations on our 4.25% Convertible Senior Subordinated Notes. After payment of our debt, our unrestricted cash balance at March 30, 2009 was approximately $69 million.

We have net operating loss and tax credit carryforwards the tax effect of which aggregate $118.6 million at December 31, 2008. These carryforwards, which expire principally between 2018 and 2028, are available to reduce future income tax liabilities in the United States and certain foreign jurisdictions. We expect the sale of our investment in SEN to generate taxable income which we will off-set with existing net operating loss carry forwards.

We have outstanding standby letters of credit, bank guarantees and surety bonds in the amount of $12.1 million to support certain operating lease obligations, workers' compensation insurance, and certain value added tax claims in Europe, of which $8.7 million at December 31, 2008 was supported by cash pledged as collateral. The pledged cash is reflected as restricted cash on the consolidated balance sheet.

On April 23, 2008, we entered into a revolving credit facility with a bank that provides for borrowings up to the lesser of $50 million or specified percentages of the amounts of qualifying accounts receivable and inventory. We are currently unable to borrow against the facility because are not currently, and do not expect to become, in compliance with the financial covenants contained in the underlying credit agreement. This facility expires in April 2010. If we terminate this revolving credit facility prior to April 23, 2009, we will have to pay an early termination fee of approximately $1.0 million as the date of termination. If we terminate this revolving credit facility after April 23, 2009 but prior to its expiration, we will have to pay an early termination fee of approximately $0.5 million as of the date of termination.

We do not currently have access to any other source of credit. We are continuing to explore new financing sources. However, in light of the current negative economic environment, including the prolonged downturn in the semiconductor and semicap equipment industries, and the negative effect it has had on the Company's results of operations, financial position, liquidity, and the lending environment,we anticipate that it would be very difficult for us to obtain significant new credit on favorable terms, if at all.

Although our cash requirements fluctuate based on the timing and extent of a number of factors, we believe, as discussed above, that our existing cash and cash equivalents, which include the net proceeds from the sale of our investment in SEN, as well as cash generated by anticipated operations, will be sufficient to satisfy our anticipated cash requirements at least through 2009. However, if that is not the case, and we are unable to obtain additional financing if and when needed, we would be required to curtail or shut down our operations, which would materially adversely affect the prospects of our business.

## Market risk

As filed, 2,160 characters.

### Interest Rate Sensitivity

Axcelis' exposure to market risk for changes in interest rates relates primarily to our investment portfolio, which consists entirely of cash-equivalents at December 31, 2008. The primary objective of our investment activities is to preserve principal while maximizing yields without significantly increasing risk. This is accomplished by investing in marketable high investment grade securities and limiting exposure to any one issue or issuer. We do not use derivative financial instruments in managing our investment portfolio and, due to the nature of our investments, we do not expect our operating results or cash flows to be affected to any significant degree by any change in market interest rates.

### Foreign Currency Exchange Risk

Substantially all of our sales are billed in U.S. dollars, thereby reducing the impact of fluctuations in foreign exchange rates on our results. Operating margins of certain foreign operations can fluctuate with changes in foreign exchange rates to the extent revenues are billed in U.S. dollars and operating expenses are incurred in the local functional currency. During the years ended December 31, 2008 and 2007, approximately 30% and 10% of our revenues were derived from foreign operations with this inherent risk. In addition, at both December 31, 2008 and 2007, our operations outside of the United

States accounted for approximately 53% and 37% of our total assets, respectively, the majority of which was denominated in currencies other than the U.S. dollar.

Our investment in SEN and our royalty and equity income from SEN were subject to foreign currency exchange risks. For royalties to be received in cash and certain other accounts receivable from SEN ($0.25 million at December 31, 2008) we hedge, from time to time, our exposure to currency fluctuation through the use of forward contracts. The effect of a 10% depreciation of the Japanese Yen compared to the U.S. dollar would result in a write-down in our investment in SEN and a corresponding decrease in accumulated other comprehensive income (included in stockholders' equity) of $14.2 million at December 31, 2008.

## Controls and procedures

As filed, 6,316 characters.

### Evaluation of Disclosure Controls and Procedures.

Our management, with the participation of our principal executive officer and principal financial officer, has evaluated the effectiveness of our disclosure controls and procedures (as defined in Rule 13a-15(e) under the Securities Exchange Act of 1934, as amended (the "Exchange Act")) as of the end of the period covered by this annual report (the "Evaluation Date"). Based on this evaluation, our principal executive officer and principal financial officer concluded that, as of the Evaluation Date, these disclosure controls and procedures are effective.

### Internal Control over Financial Reporting

### Management's Annual Report on Internal Control over Financial Reporting

Management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Rule 13a-15(f) under the Exchange Act. Because of its inherent limitations, internal control over financial reporting may not prevent or detect all misstatements. A control system, no matter how well designed and operated, can provide only reasonable assurance with respect to financial statement preparation and presentation. Projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

Management assessed the effectiveness of our internal control over financial reporting as of December 31, 2008. In making this assessment, management used the criteria set forth in the Committee of Sponsoring Organizations of the Treadway Commission (COSO) Internal Control-Integrated Framework.

Based on this assessment, management has concluded that, as of December 31, 2008, our internal control over financial reporting is effective based on those criteria.

The independent registered public accounting firm of Ernst & Young LLP, as auditors of our consolidated financial statements, has issued an attestation report on its assessment of our internal control over financial reporting.

### Report of Independent Registered Public Accounting Firm

The Board of Directors and Stockholders of Axcelis Technologies, Inc.

We have audited Axcelis Technologies, Inc.'s internal control over financial reporting as of December 31, 2008, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (the COSO criteria). Axcelis Technologies Inc.'s management is responsible for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management's Annual Report on Internal Control over Financial reporting. Our responsibility is to express an opinion on the company's internal control over financial reporting based on our audit.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

A company's internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company's internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company's assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In our opinion, Axcelis Technologies Inc. maintained, in all material respects, effective internal control over financial reporting as of December 31, 2008, based on the COSO criteria.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Axcelis Technologies Inc. as of December 31, 2008 and 2007, and the related consolidated statements of operations, stockholders' equity, and cash flows for each of the three years in the period ended December 31, 2008 of Axcelis Technologies, Inc. and our report dated March 31, 2009 expressed an unqualified opinion thereon.

/s/ Ernst & Young LLP

Boston, Massachusetts

March 31, 2009

### Changes in Internal Control over Financial Reporting

There was no change in our internal control over financial reporting (as defined in Rule 13a-15(f) under the Exchange Act) identified in connection with the evaluation of our internal control that occurred during our fourth quarter that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

Filed Mar 31, 2009.
Source: SEC EDGAR, the filing index for accession 0001047469-09-003537. Last ingested by Listed: Nov 13, 2026, 17:24 ET. No prices; not investment advice.
