# Motorcar Parts of America Inc: Form 10-K for the period ended Mar 31, 2012

- Company: [Motorcar Parts of America Inc](/companies/mpaa.md) (CIK 918251)
- Form: 10-K
- Filed: 2012-09-28
- Accepted by EDGAR: Sep 28, 2012, 16:06 ET
- Period: 2012-03-31
- Accession: 0001140361-12-041905
- Inline XBRL: yes
- Main document: https://www.sec.gov/Archives/edgar/data/918251/000114036112041905/form10k.htm
- All documents and exhibits: https://www.sec.gov/Archives/edgar/data/918251/000114036112041905/

## Figures reported in this filing

Standardized XBRL line items for the period ended 2012-03-31.

| Line item | Period | Value | XBRL concept |
| --- | --- | ---: | --- |
| Revenue | 12 months, 2011-04-01 to 2012-03-31 | $363.7m | us-gaap:SalesRevenueNet |
| Cost of revenue | 12 months, 2011-04-01 to 2012-03-31 | $336.0m | us-gaap:CostOfGoodsAndServicesSold |
| Gross profit | 12 months, 2011-04-01 to 2012-03-31 | $27.7m | us-gaap:GrossProfit |
| Research and development | 12 months, 2011-04-01 to 2012-03-31 | $1.8m | us-gaap:ResearchAndDevelopmentExpense |
| Operating income | 12 months, 2011-04-01 to 2012-03-31 | −$27.5m | us-gaap:OperatingIncomeLoss |
| Income tax | 12 months, 2011-04-01 to 2012-03-31 | $6.8m | us-gaap:IncomeTaxExpenseBenefit |
| Net income | 12 months, 2011-04-01 to 2012-03-31 | −$48.5m | us-gaap:NetIncomeLoss |
| Diluted EPS | 12 months, 2011-04-01 to 2012-03-31 | −$3.90 | us-gaap:EarningsPerShareDiluted |
| Basic EPS | 12 months, 2011-04-01 to 2012-03-31 | −$3.90 | us-gaap:EarningsPerShareBasic |
| Diluted shares (weighted) | 12 months, 2011-04-01 to 2012-03-31 | 12,442,684 shares | us-gaap:WeightedAverageNumberOfDilutedSharesOutstanding |
| Operating cash flow | 12 months, 2011-04-01 to 2012-03-31 | −$38.5m | us-gaap:NetCashProvidedByUsedInOperatingActivities |
| Capital expenditure | 12 months, 2011-04-01 to 2012-03-31 | $1.6m | us-gaap:PaymentsToAcquirePropertyPlantAndEquipment |
| Share repurchases | 12 months, 2011-04-01 to 2012-03-31 | $0 | us-gaap:PaymentsForRepurchaseOfCommonStock |
| Current assets | at 2012-03-31 | $168.2m | us-gaap:AssetsCurrent |
| Total assets | at 2012-03-31 | $501.9m | us-gaap:Assets |
| Current liabilities | at 2012-03-31 | $170.4m | us-gaap:LiabilitiesCurrent |
| Total liabilities | at 2012-03-31 | $428.3m | us-gaap:Liabilities |
| Shareholders' equity | at 2012-03-31 | $73.6m | us-gaap:StockholdersEquity |

## Business

As filed, 19,821 characters.

### General

We are a leading manufacturer, remanufacturer, and distributor of aftermarket automobile parts.

We historically have remanufactured alternators and starters for import and domestic cars, light trucks, heavy duty, agricultural and industrial applications. As a result of our May 2011 acquisition of the business formerly operated by Fenwick Automotive Products Limited (“FAPL”), we also manufacture, remanufacture and distribute new and remanufactured steering components, brake calipers, master cylinders, hub assembly and bearings, and clutches and clutch hydraulics for virtually all passenger and truck vehicles. The acquisition of FAPL provided us the opportunity to expand beyond our existing product lines of alternators and starters and further enhanced our market presence in North America. As a result of this acquisition, we reassessed and revised our segment reporting to reflect two reportable segments, our existing product lines were included under our rotating electrical and the product lines from our FAPL acquisition were included under the under-the-car product line, based on the way we manage, evaluate and internally report our business activities. We intend to focus our efforts in the near term on four major categories: rotating electrical, brakes, steering, and wheel hubs and bearings. All of these parts are non-discretionary.

The current population of vehicles in North America is approximately 240 million and the average age of these vehicles is approximately 11 years. We believe the market for replacement parts is primarily driven by the age of vehicles and the miles driven. While an aged vehicle population is favorable today, miles driven continues to fluctuate primarily based on fuel prices.

The aftermarket for automobile parts is divided into two markets. The first market is the do-it-yourself (“DIY”) market, which is generally serviced by the large retail chain outlets. Consumers who purchase parts from the DIY channel generally install parts into their vehicles themselves. In most cases, this is a cheaper alternative than having the repair performed by a professional installer. The second market is the professional installer market, commonly known as the do-it-for-me (“DIFM”) market. This market is serviced by the traditional warehouse distributors, the dealer networks, and the commercial divisions of retail chains. Generally, the consumer in this channel is a professional parts installer.

Our products are distributed to both the DIY and DIFM markets and are distributed predominantly throughout North America. We sell our products to the largest auto parts retail chains and traditional warehouse chains and to major automobile manufacturers for both their aftermarket programs and their warranty replacement programs (“OES”). Demand and replacement rates for aftermarket remanufactured automobile parts generally increase with the age of vehicles and increases in miles driven.

Historically, the largest share of our business was in the DIY market. While that is still the case, our DIFM business is now a significant part of our business. In difficult economic times, we believe consumers are more likely to purchase lower cost replacement parts in both the DIY and DIFM markets. We focus on supplying both these channels with the most cost efficient replacement parts for the consumer to purchase.

The DIFM market is an attractive opportunity for growth. We are positioned to benefit from this market opportunity in two ways: (1) our auto parts retail customers are expanding their efforts to target the DIFM market and (2) we sell our products under private label and our Quality-Built®, Talon®, Xtreme®, Reliance™, Fenco™, Dynapak®, and other brand names directly to suppliers that focus on professional installers. In addition, we sell our products to OE manufacturers for distribution to the professional installer both for warranty replacement and their general aftermarket channels. We have been successful in growing sales to this market.

Financial information regarding our operating segments is included under “Financial Statements and Supplementary Data” in Part II, Item 8 of this Annual Report on Form 10-K.

### Company Products

Our products are manufactured to meet or exceed OE manufacturer specifications. Remanufacturing generally creates a supply of parts at a lower cost to the end user than newly manufactured parts and makes available automotive parts which are no longer manufactured as new. Our remanufactured parts are sold at competitively lower prices than most new replacement parts.

We recycle nearly all materials in keeping with our focus of positively impacting the environment. Nearly all parts, including metal from the Used Cores, and corrugated packaging are recycled.

We remanufacture automobile parts for virtually all import and domestic vehicles sold in the North America. We believe most of our automobile parts are non-elective replacement parts in all makes and models of vehicles because they are required for a vehicle to operate. These products are sold under our customers’ widely recognized private label brand names and our Quality-Built®, Talon®, Xtreme®, Reliance™, Fenco™, Dynapak® and other brand names.

The increasing complexity of cars and light trucks and the number of different makes and models of these vehicles have resulted in a significant increase in the number of different alternators and starters required to service import and domestic cars and light trucks. We carry over 4,000 stock keeping units (“SKUs”) for alternators and starters which cover applications for most import and domestic cars and light trucks and over 4,100 SKUs for heavy duty and a variety of agricultural and industrial applications.

We also manufacture, remanufacture and distribute new and remanufactured steering components, brake calipers, master cylinders, hub assembly and bearings, and clutches and clutch hydraulics for virtually all passenger and truck vehicles. We sell these remanufactured products under the Fenco™ brand name and new products under the Dynapak® brand name. We carry over 13,000 SKUs for virtually all passenger and truck vehicles.

### Customers: Customer Concentration

We serve all of the largest retail automotive chain stores including AutoZone, Advance, Genuine Parts (NAPA), O’Reilly, Pep Boys, with an aggregate of approximately 13,500 retail outlets as well as a diverse group of automotive warehouse distributors and OES customers.

While we continually seek to diversify our customer base, we currently derive, and have historically derived, a substantial portion of our sales from a small number of large customers. During fiscal 2012, 2011 and 2010, sales to our four largest customers constituted approximately 70%, 81% and 85%, respectively, of our consolidated net sales, and sales to our largest customer, AutoZone, constituted approximately 41%, 48% and 44%, respectively, of our consolidated net sales. Any meaningful reduction in the level of sales to any of these customers, deterioration of any customer’s financial condition or the loss of a customer could have a materially adverse impact upon us.

### Customer Arrangements; Impact on Working Capital

We have or are renegotiating long-term agreements with many of our major customers. Under these agreements, which in most cases have initial terms of at least four years, we are designated as the exclusive or primary supplier for specified categories of our products. Because of the very competitive nature of the market and the limited number of customers for these products, our customers have sought and obtained price concessions, significant marketing allowances and more favorable delivery and payment terms in consideration for our designation as a customer’s exclusive or primary supplier. These incentives differ from contract to contract and can include (i) the issuance of a specified amount of credits against receivables in accordance with a schedule set forth in the relevant contract, (ii) support for a particular customer’s research or marketing efforts provided on a scheduled basis, (iii) discounts granted in connection with each individual shipment of product, and (iv) other marketing, research, store expansion or product development support. These contracts typically require that we meet ongoing standards related to fulfillment, price, and quality. Our contracts with major customers expire at various dates through March 2019.

These longer-term agreements strengthen our customer relationships and business base. The increased demand for product as a result of entering into these longer-term agreements often requires that we increase our inventories, accounts payable and personnel. Customer demands that we purchase their Remanufactured Core inventory have also been a significant and an additional strain on our available working capital. The marketing and other allowances we typically grant our customers in connection with our new or expanded customer relationships adversely impact the near-term revenues, profitability and associated cash flows from these arrangements. However, we believe the investment we make in these new or expanded customer relationships will improve our overall liquidity and cash flow from operations over time.

### Competition

The aftermarket automotive parts market is highly competitive. We compete with several large and medium sized remanufacturers and a large number of smaller regional and specialty remanufacturers. We also compete with overseas manufacturers, particularly those located in China, who are increasing their operations and could become a significant competitive force in the future.

We believe that the reputations for quality and customer service that a supplier enjoys are significant factors in a customer’s purchase decision. We believe that these factors favor our company, which provides quality replacement automotive products, rapid and reliable delivery capabilities as well as promotional support. We believe that our ability to provide efficient delivery distinguishes us from many of our competitors in the rotating electrical business and provides a competitive advantage, and we are implementing new initiatives in our under-the-car business to improve the efficiency of our delivery of under-the-car products and thus provide a competitive advantage in the under-the-car business. Price and payment terms are also very important competitive factors.

For the most part, our products have not been patented nor do we believe that our products are patentable. We seek to protect our proprietary processes and other information by relying on trade secret laws and non-disclosure and confidentiality agreements with certain of our employees and other persons who have access to that information.

### Company Operations

**Production Process.** Our remanufacturing process begins with the receipt of Used Cores from our customers or core brokers. The Used Cores are evaluated for inventory control purposes and then sorted by part number. Each Used Core is completely disassembled into its fundamental components. The components are cleaned in a process that employs customized equipment and cleaning materials in accordance with the required specifications of the particular component. All components known to be subject to major wear and those components determined not to be reusable or repairable are replaced by new components. Non-salvageable components of the Used Core are sold as scrap.

After the cleaning process is complete, the salvageable components of the Used Core are inspected and tested as prescribed by our ISO TS 16949 approved quality control program, which is implemented throughout the production process. ISO TS 16949 is an internationally recognized, world class, automotive quality system. Upon passage of all tests, which are monitored by designated quality control personnel, all the component parts are assembled in a work cell into a finished product. Inspection and testing are conducted at multiple stages of the remanufacturing process, and each finished product is inspected and tested on equipment designed to simulate performance under operating conditions. Finished products are either stored in our warehouse facility or packaged for immediate shipment. To maximize remanufacturing efficiency, we store component parts ready for assembly in our warehousing facilities.

Our remanufacturing processes combine product families with similar configurations into dedicated factory work cells. This remanufacturing process, known as “lean manufacturing,” replaced the more traditional assembly line approach we had previously utilized and eliminated a large number of inventory moves and the need to track inventory movement through the remanufacturing process. This lean manufacturing process has been fully implemented at all of our rotating electrical production facilities and has recently been introduced at our under-the-car production facilities. Because of this lean manufacturing approach, we significantly reduced the time it takes to produce a finished product. We continue to explore opportunities for improving efficiencies in our remanufacturing process.

**Offshore Remanufacturing.** The majority of our remanufacturing operations are now conducted at our facilities in Mexico and Malaysia. For our rotating electrical products, we continue to maintain production of certain remanufactured units that require specialized service and/or rapid turnaround in our U.S. facilities. We also operate technical centers within our U.S. facilities which provide recertification of finished goods returns, rework including testing, kitting and packaging, and some small scale production. In addition, we operate a shipping and receiving warehouse and testing facility in Singapore for our rotating electrical products.

**Used Cores.** The majority of our Used Cores are obtained from customers using our core exchange program. The core exchange program consists of the following steps:

- Our customers purchase from us a remanufactured unit to be sold to their consumer.
- Our customers offer their consumers a credit to exchange their used unit (Used Core) at the time the consumer purchases a remanufactured unit.
- We, in turn, offer our customers a credit to send us these Used Cores. The credit reduces our accounts receivable.

Our customers are not obligated to send us all the Used Cores exchanged by their consumers. We have historically purchased Used Cores in the open market from core brokers who specialize in buying and selling Used Cores. Although the open market is not a primary source of Used Cores, it is a critical source for meeting our raw material demands. Remanufacturing consumes, on average, more than one Used Core for each remanufactured unit produced since not all Used Cores are reusable. The yield rates depend upon both the product and customer specifications.

The price of a finished product sold to our customers is generally comprised of an amount for remanufacturing (“unit value”) and an amount separately invoiced for the Remanufactured Core included in the product (“Remanufactured Core charge”). The Remanufactured Core charge is equal to the credit we offer to induce the customer to use our core exchange program and send back the Used Cores to us. The ability to obtain Used Cores, materials and components of the types and quantities we need is essential to our ability to meet demand.

**Return Rights.** Under our customer agreements and general industry practice, our customers are allowed stock adjustments when their inventory of certain product lines exceeds the inventory necessary to support sales to end-user consumers. Customers have various contractual rights for stock adjustments which are typically in the range of 3%-5% of total consolidated units sold. In some instances, we allow a higher level of returns in connection with a significant update order. In addition, we allow customers to return goods to us that their end-user consumers have returned to them. We allow this general right of return regardless of whether the returned item is defective. We seek to limit the aggregate of stock adjustment and other customer returns to less than 20% of unit sales. Stock adjustment returns do not occur at any specific time during the year.

As is standard in the industry, we only accept returns from on-going customers. If a customer ceases doing business with us, we have no further obligation to accept additional product returns from that customer. Similarly, we accept product returns and grant appropriate credits from new customers from the time the new customer relationship is established. This obligation to accept returns from new customers does not result in decreased liquidity or increased expenses since we only accept one returned product for each unit sold to the new customer. In each case, the return must be received by us in the original box of the unit sold.

**Supplier Relationships.** We purchase products from suppliers for resale, primarily in our under-the-car segment. We have entered into a long-term strategic relationship with Wanxiang America Corporation (the “Supplier”) wherein it has the right to supply new automotive parts and components required by FAPL, our wholly-owned subsidiary, from third party suppliers, provided that the Supplier matches or betters pricing and other material terms of third party suppliers for all parts of comparable quality that FAPL requires.

**Sales, Marketing and Distribution.** We have one of the widest varieties of automotive products available to the market, and we market and distribute our products throughout North America. Our products for the automotive retail chain market are primarily sold under our customers’ widely recognized private labels. We have expanded our sales efforts beyond automotive retail chains to include warehouse distribution centers serving professional installers. Our products are also sold under our own Quality-Built®, Talon®, Xtreme®, Reliance™, Fenco™, Dynapak®, and other brand names. We ship our products from our facilities and fee warehouses located in North America.

We publish, for print and electronic distribution, a catalog with part numbers and applications for our products along with a detailed technical glossary and informational database. We believe that we maintain one of the most extensive catalog and product identification systems available to the market.

**Employees.** We had 3,340 employees at March 31, 2012, compared to 1,689 employees at March 31, 2011. Of these 408 employees were located in the U.S., 122 in Canada, 2,581 in Mexico, and 229 at our Singapore and Malaysian facilities, at March 31, 2012. Approximately 317 of these employees were administrative personnel, of which 31 were engaged in sales. A union represents approximately 2,453 employees at our Mexico facilities. All other employees are non-union. We consider our relations with our employees to be satisfactory.

### Governmental Regulation

Our operations are subject to federal, state and local laws and regulations governing, among other things, emissions to air, discharge to waters, and the generation, handling, storage, transportation, treatment and disposal of waste and other materials. We believe that our businesses, operations and facilities have been and are being operated in compliance in all material respects with applicable environmental and health and safety laws and regulations, many of which provide for substantial fines and criminal sanctions for violations. Potentially significant expenditures, however, could be required in order to comply with evolving environmental and health and safety laws, regulations or requirements that may be adopted or imposed in the future.

## Risk factors

As filed, 29,918 characters.

*While we believe the risk factors described below are all the material risks currently facing our business, additional risks we are not presently aware of or that we currently believe are immaterial may also impair our business operations. Our financial condition or results of operations could be materially and adversely impacted by these risks, and the trading price of our common stock could be adversely impacted by any of these risks. In assessing these risks, you should also refer to the other information included in or incorporated by reference into this Form 10-K, including our consolidated financial statements and related notes thereto appearing elsewhere or incorporated by reference in this Form 10-K.*

***We rely on a few major customers for a significant majority of our business, and the loss of any of these customers, significant changes in the prices, marketing allowances or other important terms provided to any of our major customers or adverse developments with respect to the financial condition of any of our major customers would reduce our net income and operating results.***

Our consolidated net sales are concentrated among a small number of large customers. During fiscal 2012, sales to our four largest customers constituted approximately 70% of our consolidated net sales, and sales to our largest customer constituted approximately 41% of our consolidated net sales. Because our sales are concentrated, and the market in which we operate is very competitive, we are under ongoing pressure from our customers to offer lower prices, extended payment terms, increased marketing allowances and other terms more favorable to these customers. These customer demands have put continued pressure on our operating margins and profitability, resulted in periodic contract renegotiation to provide more favorable prices and terms to these customers and significantly increased our working capital needs. In addition, this customer concentration leaves us vulnerable to any adverse change in the financial condition of any of our major customers. The loss or significant decline of sales to any of our major customers would reduce our net income and adversely affect our operating results.

***Our offshore remanufacturing and logistic activities expose us to increased political and economic risks and place a greater burden on management to achieve quality standards.***

Our overseas operations, especially our operations in Mexico, increase our exposure to political, criminal or economic instability in the host countries and to currency fluctuations. Risks are inherent in international operations, including:

- exchange controls and currency restrictions;
- currency fluctuations and devaluations;
- changes in local economic conditions;
- repatriation restrictions (including the imposition or increase of withholding and other taxes on remittances and other payments by foreign subsidiaries);
- global sovereign uncertainty and hyperinflation in certain foreign countries;
- laws and regulations relating to export and import restrictions;
- exposure to government actions; and
- exposure to local political or social unrest including resultant acts of war, terrorism or similar events.

These and other factors may have a material adverse effect on our offshore activities and on our business, results of operations and financial condition. Our overall success as a business depends, in part, upon our ability to manage our foreign operations. We may not continue to succeed in developing and implementing policies and strategies that are effective in each location where we do business, and failure to do so could adversely affect our business, results of operations and financial condition.

***Interruptions or delays in obtaining component parts could impair our business and adversely affect our operating results.***

In our remanufacturing processes, we obtain Used Cores, primarily through the core exchange program with our customers, and component parts from third-party manufacturers. Historically, the Used Core returned from customers together with purchases from core brokers have provided us with an adequate supply of Used Cores. If there was a significant disruption in the supply of Used Cores, whether as a result of increased Used Core acquisitions by existing or new competitors or otherwise, our operating activities would be materially and adversely impacted. In addition, a number of the other components used in the remanufacturing process are available from a very limited number of suppliers. We are, as a result, vulnerable to any disruption in component supply, and any meaningful disruption in this supply would materially and adversely impact our operating results.

***Increases in the market prices of key component raw materials could negatively impact our profitability.***

In light of the long-term, continuous pressure on pricing which we have experienced from our major customers, we may not be able to recoup the higher prices which raw materials, particularly aluminum and copper, may command in the marketplace. We believe the impact of higher raw material prices, which is outside our control, is mitigated to some extent because we recover a substantial portion of our raw materials from Used Cores returned to us by our customers through the core exchange program. However, we are unable to determine what adverse impact, if any, sustained raw material price increases may have on our profitability.

***Substantial and potentially increasing competition could reduce our market share and significantly harm our financial performance.***

While we believe we are well-positioned in the aftermarket for remanufactured products, this market is very competitive. In addition, other overseas manufacturers, particularly those located in China, are increasing their operations and could become a significant competitive force in the future. We may not be successful competing against other companies, some of which are larger than us and have greater financial and other resources at their disposal. Increased competition could put additional pressure on us to reduce prices or take other actions which may have an adverse effect on our operating results.

***Our financial results are affected by automotive parts failure rates that are outside our control.***

Our operating results are affected by automotive parts failure rates. These failure rates are impacted by a number of factors outside our control, including product designs that have resulted in greater reliability, consumers driving fewer miles as a result of both high gasoline prices and the slowdown in the U.S. economy, and the average age of vehicles on the road. A reduction in the failure rates of automotive parts would adversely affect our sales and profitability.

### Our operating results may continue to fluctuate significantly.

We have experienced significant variations in our annual and quarterly results of operations. These fluctuations have resulted from many factors, including shifts in the demand and pricing for our products and general economic conditions, including changes in prevailing interest rates. Our gross profit percentage fluctuates due to numerous factors, some of which are outside our control. These factors include the timing and level of marketing allowances provided to our customers, differences between the level of projected sales to a particular customer and the actual sales during the relevant period, pricing strategies, the mix of products sold during a reporting period, fluctuations in the level of Used Core returns during the period, and general market and competitive conditions.

### Our lenders may not waive future defaults under our credit agreements.

Over the past several years, we have violated a number of the financial and other covenants contained in our credit agreements. To this point, our lenders have been willing to waive these covenant defaults and to do so without imposing any significant cost or penalty on us. If we fail to meet the financial covenants or the other obligations set forth in our credit agreements in the future, there is no assurance that our lenders will waive any such defaults.

***Our level of indebtedness and the terms of our indebtedness could adversely affect our business and liquidity position.***

Our indebtedness may increase substantially from time to time for various reasons, including fluctuations in operating results, marketing allowances provided to customers, capital expenditures and possible acquisitions. Our indebtedness could materially affect our business because (i) a portion of our cash flow must be used to service debt rather than finance our operations, (ii) it may eventually impair our ability to obtain financing in the future, and (iii) it may reduce our flexibility to respond to changes in business and economic conditions or take advantage of business opportunities that may arise.

***Our failure to execute our under-the-car product line turnaround plan would negatively impact our results of operations.***

Our financial performance and profitability depend in part on our ability to successfully execute our under-the-car product line turnaround plan. Various factors, including the substantial indebtedness of the Fenco borrowers, adverse industry conditions, and the other matters discussed in Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations," could adversely impact our ability to execute our under-the-car product line turnaround plan. There also can be no assurance that, even if implemented, our under-the-car product line turnaround plan will be successful. If it is not, we may not be able to repay debt, could determine to close or sell operations, be subject to liabilities, or undergo certain other events that could cause us to: lose our investment in our Fenco subsidiary, which, as of August 31, 2012, was comprised of $4,946,000 in equity and $49,141,000 of long-term notes receivable, including accrued interest; not collect all or a portion of $27,382,000 of accounts receivable outstanding as of August 31, 2012; and incur other losses.

***Our Fenco subsidiaries have incurred substantial indebtedness, which could restrict the business activities of our under-the-car product line.***

As of March 31, 2012, $48,884,000 was outstanding under the Fenco revolving facility and $10,000,000 was outstanding under the Fenco term loan. Industry conditions continue to evolve, and we are unable to predict the actions that we may be required to take in order to successfully implement our under-the-car product line turnaround plan and maintain Fenco’s access to liquidity in response to these conditions. The inability of our under-the-car business to generate sufficient cash flow to satisfy Fenco’s obligations or our inability to refinance Fenco’s debt obligations on commercially reasonable terms would have a material adverse effect on our business, financial condition and results of operations.

The substantial indebtedness of Fenco could:

- increase the vulnerability of our under-the-car business to general adverse economic and industry conditions;
- limit our ability to respond to business opportunities otherwise available for our under-the-car business;
- subject Fenco to additional financial and other restrictive covenants, the failure of which to satisfy could result in default under Fenco’s indebtedness; and
- make it difficult for Fenco to satisfy their obligations under their indebtedness.

### Our stock price may be volatile and could decline substantially.

Our stock price may decline substantially as a result of the volatile nature of the stock market and other factors beyond our control. From the date of the Fenco acquisition through September 24, 2012, our stock price ranged from $4.04 to $15.62 per share. The stock market has, from time to time, experienced extreme price and volume fluctuations. Many factors may cause the market price for our common stock to decline, including (i) our operating results failing to meet the expectations of securities analysts or investors in any quarter, (ii) downward revisions in securities analysts’ estimates, (iii) market perceptions concerning our future earnings prospects, (iv) public or private sales of a substantial number of shares of our common stock, and (v) adverse changes in general market conditions or economic trends.

### Unfavorable currency exchange rate fluctuations could adversely affect us.

We are exposed to market risk from material movements in foreign exchange rates between the U.S. dollar and the currencies of the foreign countries in which we operate. As a result of our extensive operations in Mexico, our primary risk relates to changes in the rates between the U.S. dollar and the Mexican peso. To mitigate this currency risk, we enter into forward foreign exchange contracts to exchange U.S. dollars for Mexican pesos. The extent to which we use forward foreign exchange contracts is periodically reviewed in light of our estimate of market conditions and the terms and length of anticipated requirements. The use of derivative financial instruments allows us to reduce our exposure to the risk that the eventual net cash outflow resulting from funding the expenses of the foreign operations will be materially affected by changes in the exchange rates. We do not engage in currency speculation or hold or issue financial instruments for trading purposes. These contracts expire in a year or less. Any change in the fair value of foreign exchange contracts is accounted for as an increase or decrease to general and administrative expenses in current period earnings.

***We may continue to make strategic acquisitions of other companies or businesses and these acquisitions introduce significant risks and uncertainties, including risks related to integrating the acquired businesses and achieving benefits from the acquisitions.***

In order to position ourselves to take advantage of growth opportunities, we have made, and may continue to make, strategic acquisitions that involve significant risks and uncertainties. These risks and uncertainties include: (i) the difficulty in integrating newly-acquired businesses and operations in an efficient and effective manner, (ii) the challenges in achieving strategic objectives, cost savings and other benefits from acquisitions, (iii) the potential loss of key employees of the acquired businesses, (iv) the risk of diverting the attention of senior management from our operations, (v) risks associated with integrating financial reporting and internal control systems, (vi) difficulties in expanding information technology systems and other business processes to accommodate the acquired businesses, and (vii) future impairments of goodwill of an acquired business.

Our business, financial condition and results of operations have been materially adversely affected by, among other things, our inability to: integrate the Fenco business into our operations in an efficient and effective manner; integrate Fenco’s financial reporting and internal control systems with our systems; and expand our information technology systems and other business processes to accommodate the Fenco business. To address these issues, we have implemented and are continuing to implement our Fenco turnaround plan (see Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” for a further discussion of our Fenco turnaround plan). There can be no assurance that the Fenco turnaround plan will be successfully implemented in a timely manner.

***Continuing weakness in conditions in the global credit markets and macroeconomic factors could adversely affect our financial condition and results of operations.***

The ongoing weakness in the financial condition of financial institutions has resulted in significant constraints on liquidity and availability in global credit markets and more stringent borrowing terms. Modest economic growth in most major industrial countries in the world and uncertain prospects for continued growth threaten to cause further tightening of the credit markets, more stringent lending standards and terms, and higher volatility in interest rates. The persistence of these conditions could have a material adverse effect on our borrowings and the availability, terms and cost of such borrowings. In addition, deterioration in the U.S. economy could adversely affect our corporate results, which could adversely affect our operating results.

***Our reliance on foreign suppliers for certain automotive parts poses various risks.***

A significant portion of our certain automotive parts are imported from suppliers located outside the U.S., including various countries in Asia. As a result, we are subject to various risks of doing business in foreign markets and importing products from abroad, such as:

- significant delays in the delivery of cargo due to port security considerations;
- imposition of duties, taxes, tariffs or other charges on imports;
- imposition of new legislation relating to import quotas or other restrictions that may limit the quantity of our product that may be imported into the U.S. from countries or regions where we do business;
- financial or political instability in any of the countries in which our product is manufactured;
- potential recalls or cancellations of orders for any product that does not meet our quality standards;
- disruption of imports by labor disputes and local business practices;
- political or military conflict involving the U.S., which could cause a delay in the transportation of our products and an increase in transportation costs;
- heightened terrorism security concerns, which could subject imported goods to additional, more frequent or more thorough inspections, leading to delays in deliveries or impoundment of goods for extended periods;
- natural disasters, disease epidemics and health related concerns, which could result in closed factories, reduced workforces, scarcity of raw materials and scrutiny or embargoing of goods produced in infected areas;
- inability of our non-U.S. suppliers to obtain adequate credit or access liquidity to finance their operations; and
- our ability to enforce any agreements with our foreign suppliers.

Any of the foregoing factors, or a combination of them, could increase the cost or reduce the supply of products available to us and adversely affect our business, financial condition, results of operations or liquidity.

In addition, because we depend on independent third parties to manufacture a significant portion of certain automotive products, we cannot be certain that we will not experience operational difficulties with such manufacturers, such as reductions in the availability of production capacity, errors in complying with merchandise specifications, insufficient quality controls and failure to meet production deadlines or increases in manufacturing costs.

***We have identified a material weakness in our internal control over financial reporting resulting from our acquisition of Fenco and cannot assure that additional material weaknesses will not be identified in the future. Our failure to implement and maintain effective internal control over financial reporting could result in material misstatements in our financial statements which could require us to restate financial statements, cause investors to lose confidence in our reported financial information and have a negative effective on our stock price.***

Management has identified a material weakness in our internal control over financial reporting at Fenco that affected our financial statements for the quarterly periods beginning September 30, 2011 and our financial statements for the year ended March 31, 2012. The material weakness in our internal control over financial reporting at Fenco relates to the following factors: the inadequacy of systems required to segregate and account for certain transactions accurately; the failure of financial policies and procedures at Fenco to provide for effective oversight and review of the reconciliation of accounts at month or quarter ends; and the inadequacy of the overall accounting skill set at Fenco for diligent and consistent performance of key accounting controls. These factors resulted in Fenco’s inability to complete the financial closing process on a timely and accurate basis. As a result of our failure to meet our periodic reporting obligations in a timely manner, we have received notices from the National Association of Securities Dealers Automated Quotation ("NASDAQ”) regarding our failure to maintain the listing standards for our common stock. We have submitted a compliance plan to NASDAQ, which NASDAQ has accepted. We expect to be able to fulfill the requirements set forth in the compliance plan.

We cannot assure that additional significant deficiencies or material weaknesses in our internal control over financial reporting will not be identified in the future. Any failure to maintain or implement required new or improved controls, or any difficulties we encounter in their implementation, could result in additional significant deficiencies or material weaknesses, cause us to fail to meet our periodic reporting obligations (which may result in our failure to maintain the listing standards for our common stock) or result in material misstatements in our financial statements. Any such failure could also adversely affect the results of periodic management evaluations and annual auditor attestation reports regarding the effectiveness of our internal control over financial reporting required under Section 404 of the Sarbanes-Oxley Act of 2002 and the rules promulgated under Section 404. The existence of a material weakness could result in errors in our financial statements that could result in a restatement of financial statements, cause us to fail to meet our reporting obligations (which may result in our failure to maintain the listing standards for our common stock) and cause investors to lose confidence in our reported financial information, leading to a decline in our stock price.

***Impairment of charges relating to goodwill and long-lived assets may have a material adverse effect on our earnings and results of operations.***

We regularly monitor our goodwill and long-lived assets for impairment indicators. In conducting our goodwill impairment testing, we compare the fair value of each our business segments to the related net book value. In conducting our impairment analysis of long-lived assets, we compare the undiscounted cash flows expected to be generated from the long-lived assets to the related net book values. Changes in economic or operating conditions impacting our estimates and assumptions could result in the impairment of our goodwill or long-lived assets. In the event that we determine our goodwill or long-lived assets are impaired, we may be required to record a significant charge to earnings in our financial statements that could have a material adverse effect on our results of operations. We may also incur charges in connection with the sale of assets or operations, or revaluations of assets as we change our operations.

***The issuance of shares of common stock upon events specified in our agreements with the Supplier will result in dilution of the interests of our stockholders, and may reduce the trading price of our common stock.***

On August 22, 2012, we entered into an agreement with the Supplier to guarantee up to $22,000,000 of the Fenco Credit Line. Pursuant to this agreement, after July 1, 2014, or the occurrence of an event of default, the Supplier will have the right to sell up to $8,000,000 of its outstanding obligations under the Fenco Credit Line to us in exchange, at our option, for shares of our common stock, valued at $7.75 per share, or cash. We also entered into an agreement to issue a warrant to the Supplier, where it may purchase up to 516,129 shares of our common stock for an initial exercise price of $7.75 per share, exercisable at any time after two years from August 22, 2012 and on or prior to September 30, 2017, provided that if any obligations under the Fenco Credit Line remain outstanding as of August 1, 2017, such date will be the date that is three months after the date that all obligations under the Fenco Credit Line have been repaid in full.

To the extent that these events occur to result in dilution of the interests of our stockholders, there may be an adverse effect on the trading price of our common stock. The Supplier may exercise its right to sell its obligations under the Fenco Credit Line and warrant at times when the market price of our common stock is higher or lower than the exercise price of the securities. Accordingly, the issuance of shares of common stock upon exercise of the Supplier’s right to sell its obligations and warrant will likely result in dilution of the equity represented by the then outstanding shares of common stock held by our other stockholders.

***Our failure to comply with conditions required for our common stock to be listed on the NASDAQ Global Select Market could result in delisting of our common stock from the NASDAQ Global Select Market.***

As a result of our failure to timely file our Annual Report on Form 10-K for the fiscal year ended March 31, 2012, we were not in full compliance with NASDAQ Marketplace Rule 5250(c)(1), which requires us to make, on a timely basis, all filings with the SEC required by the Securities Exchange Act of 1934, as amended. We are required to comply with NASDAQ listing rules as a condition for our common stock to continue to be listed on the NASDAQ Global Select Market. If we are unable to comply with the conditions for continued listing, then our shares of common stock are subject to immediate delisting from the NASDAQ Global Select Market. If our shares of common stock are delisted from the NASDAQ Global Select Market, they may not be eligible to trade on any national securities exchange or the over-the-counter market. If our common stock is no longer traded through a market system, it may not be liquid, which could affect its price. In addition, we may be unable to obtain future equity financing, or use our common stock as consideration for mergers or other business combinations. We intend to appeal any decision to delist our shares from the NASDAQ Global Select Market, but cannot provide any assurance that our appeal will be successful. Any such appeal will not stay the decision to delist our shares.

***Our failure to cause to be effective our registration statement on Form S-1 could result in money damages under our subscription agreement and registration rights agreement.***

In April 2012, we entered into a subscription agreement and a registration rights agreement (“Subscription Agreement”) to raise $15,004,000 in gross proceeds and net proceeds of $14,100,000 after expenses, through a private placement of our common stock. Pursuant to the terms of the Subscription Agreement, accredited investors purchased an aggregate of 1,936,000 shares of common stock in a private placement for a purchase price of $7.75 per share.

Pursuant to the Subscription Agreement, we agreed to file a registration statement with the SEC to register for resale the common stock sold in the private placement not later than 45 days after the closing of the private placement and to use commercially reasonable efforts to cause such registration statement to be declared effective, subject to certain exceptions, within 60 days of closing (or 120 days in the event of an SEC review). Failure to meet these deadlines and certain other events may result in payment to the purchasers of liquidated damages in the amount of 1.0% of the purchase price per 30-day period pending filing of the registration statement, effectiveness of the registration statement or other events, as applicable. On June 12, 2012, we filed a registration statement on Form S-1 under the Securities Act of 1933 to register the shares of common stock, which is not effective.

If our registration statement on Form S-1 does not become effective or ceases to become effective as provided in the Subscription Agreement we will be required to pay money damages, which could adversely affect our business, financial condition, results of operations or liquidity.

***An increase in the cost or a disruption in the flow of our imported products may significantly decrease our sales and profits.***

Merchandise manufactured overseas represents a part of our total product purchases. A disruption in the shipping or cost of such merchandise may significantly decrease our sales and profits. In additional, if imported merchandise becomes more expensive or unavailable, the transition to alternative sources may not occur in time to meet our demands. Merchandise from alternative sources may also be of lesser quality and more expensive than those we currently import. Risks associated with our reliance on imported merchandise include disruptions in the shipping and importation or increase in the costs of imported products. For example, common risks may be:

- raw material shortages;
- work stoppages;
- strikes and political unrest;
- problems with oceanic shipping, including shipping container shortages;
- increased customs inspections of import shipments or other factors causing delays in shipments;
- economic crises;
- international disputes and wars;
- loss of “most favored nation” trading status by the United States in relations to a particular foreign country;
- import duties;
- import quotas and other trade sanctions; and
- increases in shipping rates.

Products manufactured overseas and imported into the U.S. and other countries are subject to import restrictions and duties.

## Properties

As filed, 1,740 characters.

The following table sets forth the location, type of facility, square footage and ownership interest in each of our facilities.

| Location Rotating Electrical | Type of Facility | Approx. Square Feet | Leased or Owned | Date of Lease Expiration |
| --- | --- | ---: | --- | --- |
| Torrance, CA (1) | Remanufacturing, Warehouse, Administrative, and Office | 151,000 | Leased | March 2022 |
| Tijuana, Mexico (2) | Remanufacturing, Warehouse, and Office | 311,000 | Leased | April 2015 |
| Singapore & Malaysia | Remanufacturing, Warehouse, and Office | 60,000 | Leased | Various through November 2014 |
| **Under-the-car Product Line** |  |  |  |  |
| Lock Haven, PA (2) | Warehouse and Distribution | 320,000 | Leased | November 2014 |
| Lock Haven, PA | Technical Center | 50,000 | Owned | - |
| Monterrey, Mexico (2) | Industrial and Office | 183,000 | Leased | July 2021 |
| Bedford, NH (3) | Industrial and Office | 154,000 | Leased | April 2014 |
| Toronto, Canada | Office and Warehouse | 45,000 | Leased | December 2013 |

1\. We expect to lease an additional 80,000 square feet under this lease effective November 2012. We plan to utilize this additional space as warehouse and distribution center for certain products. We also plan to build a technical center to provide support, among other things, for our product testing and research and development activities.

2\. We have an option to extend the lease term for two additional 5-year periods.

3\. We have the option to extend the lease term for one additional five year period.

We believe the above mentioned facilities are sufficient to satisfy our foreseeable warehousing, production, distribution and administrative office space requirements for our current operations.

## Legal proceedings

As filed, 253 characters.

We are subject to various legal proceedings arising in the normal course of conducting business. Management does not believe that the outcome of these matters will have a material adverse impact on its financial position or future results of operations.

## Management's discussion and analysis

As filed, 106,203 characters.

### Disclosure Regarding Private Securities Litigation Reform Act of 1995

This report contains certain forward-looking statements with respect to our future performance that involve risks and uncertainties. Various factors could cause actual results to differ materially from those projected in such statements. These factors include, but are not limited to: concentration of sales to certain customers, changes in our relationship with any of our major customers, the increasing customer pressure for lower prices and more favorable payment and other terms, the increasing demands on our working capital, the significant strain on working capital associated with large Remanufactured Core inventory purchases from customers, our ability to obtain any additional financing we may seek or require, our ability to achieve positive cash flows from operations, potential future changes in our previously reported results as a result of the identification and correction of errors in our accounting policies or procedures or the potential material weaknesses in our internal controls over financial reporting, lower revenues than anticipated from new and existing contracts, our failure to meet the financial covenants or the other obligations set forth in our credit agreements and the lenders’ refusal to waive any such defaults, any meaningful difference between projected production needs and ultimate sales to our customers, increases in interest rates, changes in the financial condition of any of our major customers, the impact of high gasoline prices, the potential for changes in consumer spending, consumer preferences and general economic conditions, increased competition in the automotive parts industry, including increased competition from Chinese and other offshore manufacturers, difficulty in obtaining Used Cores and component parts or increases in the costs of those parts, political, criminal or economic instability in any of the foreign countries where we conduct operations, currency exchange fluctuations, unforeseen increases in operating costs, the strategic cooperation agreement, and other factors discussed herein and in our other filings with the SEC.

### Management Overview

We are a leading manufacturer, remanufacturer, and distributor of aftermarket automobile parts.

We historically have remanufactured alternators and starters for import and domestic cars, light trucks, heavy duty, agricultural and industrial applications. As a result of our May 2011 acquisition of the business formerly operated by FAPL, we also manufacture, remanufacture and distribute new and remanufactured steering components, brake calipers, master cylinders, hub assembly and bearings, and clutches and clutch hydraulics for virtually all passenger and truck vehicles. The acquisition of FAPL provided us the opportunity to expand beyond our existing product lines of alternators and starters and further enhanced our market presence in North America. As a result of this acquisition, we reassessed and revised our segment reporting to reflect two reportable segments, our existing product lines were included under the rotating electrical and the product lines from our FAPL acquisition were included under the under-the-car product line, based on the way we manage, evaluate and internally report our business activities. We intend to focus our efforts in the near term on four major categories: rotating electrical, brakes, steering, and wheel hubs and bearings. All of these parts are non-discretionary.

The current population of vehicles in North America is approximately 240 million and the average age of these vehicles is approximately 11 years. We believe the market for replacement parts is primarily driven by the age of vehicles and the miles driven. While aged vehicle population is favorable today, the miles driven continues to fluctuate primarily based on fuel prices.

The aftermarket for automobile parts is divided into two markets. The first market is the DIY market, which is generally serviced by the large retail chain outlets. Consumers who purchase parts from the DIY channel generally install parts into their vehicles themselves. In most cases, this is a cheaper alternative than having the repair performed by a professional installer. The second market is the professional installer market, commonly known as the DIFM market. This market is serviced by the traditional warehouse distributors, the dealer networks, and the commercial divisions of retail chains. Generally, the consumer in this channel is a professional parts installer.

Our products are distributed to both the DIY and DIFM markets and are distributed predominantly throughout North America. We sell our products to the largest auto parts retail and traditional warehouse chains and to major automobile manufacturers for both their aftermarket programs and their OES. Demand and replacement rates for aftermarket remanufactured automobile parts generally increase with the age of vehicles and increases in miles driven.

Historically, the largest share of our business was in the DIY market. While that is still the case, our DIFM business is now a significant part of our business. In difficult economic times, we believe consumers are more likely to purchase lower cost replacement parts in both the DIY and DIFM markets. We focus on supplying both these channels with the most cost efficient replacement parts for the consumer to purchase.

The DIFM market is an attractive opportunity for growth. We are positioned to benefit from this market opportunity in two ways: (1) our auto parts retail customers are expanding their efforts to target the DIFM market and (2) we sell our products under private label and our Quality-Built®, Talon®, Xtreme®, Reliance™, Fenco™, Dynapak®, and other brand names directly to suppliers that focus on professional installers. In addition, we sell our products to OE manufacturers for distribution to the professional installer both for warranty replacement and their general aftermarket channels. We have been successful in growing sales to this market.

#### Under-the-car Product Line Turnaround Plan

Our top turnaround priority continues to be improvement of the financial performance of our under-the-car product line business to position it for sustained profitability and growth in the long-term. At the same time we are focused on maintaining strong liquidity and bringing the level of customer service in our under-the-car business to the excellent level of customer service we had achieved and strive to maintain in our rotating electrical business. We have been systematically and aggressively implementing our under-the-car product line turnaround plan since acquisition with our initial goal to enhance customer service followed by our plan to streamline the operations, with a goal of achieving profitability and positive cash flow for the under-the-car business. This turnaround plan is built on the following elements: upgrading customer service levels; focusing on product excellence; discontinuing certain product offerings; improving manufacturing and logistics productivity; and implementing cost savings throughout the operating model.

*Customer Service Levels*. We have made certain inventory purchases above our normal cost in order to expedite improving customer service levels. This initiative has resulted in significant improvements in our customers’ order fill rates. As a result, we had to increase our inventory levels by approximately $27 million in the aggregate from May 2011 through the quarter ended December 31, 2011. These inventory levels declined in the quarter ended March 31, 2012 to approximately the May 2011 levels. We expect these inventory levels to decrease as we continue to normalize our operations.

*Product Excellence.* We continue to place significant attention on improving product excellence in our under-the-car product line business. We have implemented a personnel training program at Fenco’s facilities in Monterrey, Mexico and have also implemented new quality control systems including new end of line testing at all of our production facilities. Throughout our system we have engaged third party labs to test purchased products.

*Review of Product Offerings*. With our Fenco acquisition we have added several new product lines which are vehicle operation critical. We have reviewed and continue to review the market opportunities for our products and potential products. In the third quarter of fiscal 2012, we discontinued the CV axle product line and shut-down the related facility. We have successfully supported our customers through this transition and continue to sell down the remaining CV axle inventory.

*Manufacturing Productivity*. We have implemented a process of continuing improvements at Fenco facilities and expect to see enhancement to productivity as we introduce lean operating disciplines.

Our implementation of our plan for Fenco has taken longer and cost more than initially anticipated. We anticipate continuing to refine this turnaround plan as the various elements are implemented. We expect these and related initiatives will be substantially completed in the first quarter of fiscal 2014. Our ability to successfully implement this plan and the timing of our implementation of this plan will depend on, among other things, our customer and vendor support and the financial resources that are or will become available for implementation of this plan. In August 2012, Fenco entered into a second amendment to the Fenco Credit Agreement which, among other things, amended the maximum amount of the revolving facility to (i) $55,000,000 for the period up to and including December 31, 2012 and (ii) $50,000,000 for the period on or after January 1, 2013 through October 6, 2014. In August 2012, we entered into a revolving credit/strategic cooperation agreement with the Supplier and Fenco pursuant to which the Supplier agreed to provide a revolving credit line for purchases of automotive parts and components by Fenco in an aggregate principal amount not to exceed $22,000,000, of which $2,000,000 will only be available for accrued interest and other amounts payable. We are also currently negotiating our accounts payable with some of Fenco’s suppliers and vendors, of which approximately $51,000,000 was past due at September 21, 2012. We cannot assure the outcome of these negotiations.

### Critical Accounting Policies

We prepare our consolidated financial statements in accordance with generally accepted accounting principles, or GAAP, in the United States. Our significant accounting policies are discussed in detail below and in Note 2 in the Notes to Consolidated Financial Statements.

In preparing our consolidated financial statements, we use estimates and assumptions for matters that are inherently uncertain. We base our estimates on historical experiences and reasonable assumptions. Our use of estimates and assumptions affect the reported amounts of assets, liabilities and the amount and timing of revenues and expenses we recognize for and during the reporting period. Actual results may differ from our estimates.

Our remanufacturing operations require that we acquire Used Cores, a necessary raw material, from our customers and offer our customers marketing and other allowances that impact revenue recognition. These elements of our business give rise to accounting issues that are more complex than many businesses our size or larger. In addition, the relevant accounting standards and issues continue to evolve.

### Segment Reporting

As a result of our May 2011 acquisition, we reassessed and revised our segment reporting to reflect two reportable segments, rotating electrical and under-the-car product line, based on the way we manage, evaluate and internally report our business activities. Prior to this acquisition, we operated in one reportable segment pursuant to the guidance provided under the Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”).

### Inventory

#### Non-core Inventory

Non-core inventory is comprised of non-core raw materials, the non-core value of work in process and the non-core value of finished goods. Used Cores, the Used Core value of work in process and the Remanufactured Core portion of finished goods are classified as long-term core inventory as described below under the caption “Long-term Core Inventory.”

Non-core inventory is stated at the lower of cost or market. The cost of non-core inventory approximates average historical purchase prices paid, and is based upon the direct costs of material and an allocation of labor and variable and fixed overhead costs. The cost of non-core inventory is evaluated at least quarterly during the fiscal year and adjusted as necessary to reflect current lower of cost or market levels. These adjustments are determined for individual items of inventory within each of the three classifications of non-core inventory as follows:

- Non-core raw materials are recorded at average cost, which is based on the actual purchase price of raw materials on hand. The average cost is updated quarterly. This average cost is used in the inventory costing process and is the basis for allocation of materials to finished goods during the production process.
- Non-core work in process is in various stages of production, is on average 50% complete and is valued at 50% of the cost of a finished good. Historically, non-core work in process inventory has not been material compared to the total non-core inventory balance.
- Finished goods cost includes the average cost of non-core raw materials and allocations of labor and variable and fixed overhead. The allocations of labor and variable and fixed overhead costs are determined based on the average actual use of the production facilities over the prior twelve months which approximates normal capacity. This method prevents the distortion in allocated labor and overhead costs that would occur during short periods of abnormally low or high production. In addition, we exclude certain unallocated overhead such as severance costs, duplicative facility overhead costs, and spoilage from the calculation and expense them as period costs. For the fiscal years ended March 31, 2012, 2011, and 2010, costs of approximately $1,410,000, $1,378,000, and $1,314,000, respectively, were considered abnormal and thus excluded from the finished goods cost calculation and charged directly to cost of sales for our rotating electrical product line.

We record an allowance for potentially excess and obsolete inventory based upon recent sales history, the quantity of inventory on-hand, and a forecast of potential use of the inventory. We periodically review inventory to identify excess quantities and part numbers that are experiencing a reduction in demand. Any part numbers with quantities identified during this process are reserved for at rates based upon management’s judgment, historical rates, and consideration of possible scrap and liquidation values which may be as high as 100% of cost if no liquidation market exists for the part.

The quantity thresholds and reserve rates are subjective and are based on management’s judgment and knowledge of current and projected industry demand. The reserve estimates may, therefore, be revised if there are changes in the overall market for our products or market changes that in management’s judgment, impact our ability to sell or liquidate potentially excess or obsolete inventory.

We record vendor discounts as a reduction of inventories that are recognized as a reduction to cost of sales as the inventories are sold.

#### Inventory Unreturned

Inventory unreturned represents our estimate, based on historical data and prospective information provided directly by the customer, of finished goods shipped to customers that we expect to be returned, under our general right of return policy, after the balance sheet date. Because all cores are classified separately as long-term assets, the inventory unreturned balance includes only the added unit value of a finished good. The return rate is calculated based on expected returns within the normal operating cycle of one year. As such, the related amounts are classified in current assets.

Inventory unreturned is valued in the same manner as our finished goods inventory.

#### Long-term Core Inventory

Long-term core inventory consists of:

- Used Cores purchased from core brokers and held in inventory at our facilities,
- Used Cores returned by our customers and held in inventory at our facilities,
- Used Cores returned by end-users to customers but not yet returned to us which are classified as Remanufactured Cores until they are physically received by us,
- Remanufactured Cores held in finished goods inventory at our facilities; and
- Remanufactured Cores held at customer locations as a part of the finished goods sold to the customer. For these Remanufactured Cores, we expect the finished good containing the Remanufactured Core to be returned under our general right of return policy or a similar Used Core to be returned to us by the customer, in each case, for credit.

Long-term core inventory is recorded at average historical purchase prices determined based on actual purchases of inventory on hand. The cost and market value of Used Cores for which sufficient recent purchases have occurred are deemed the same as the purchase price for purchases that are made in arm’s length transactions.

Long-term core inventory recorded at average historical purchase prices is primarily made up of Used Cores for newer products related to more recent automobile models or products for which there is a less liquid market. We must purchase these Used Cores from core brokers because our customers do not have a sufficient supply of these newer Used Cores available for the core exchange program.

Used Cores obtained in core broker transactions are valued based on average purchase price. The average purchase price of Used Cores for more recent automobile models is retained as the cost for these Used Cores in subsequent periods even as the source of these Used Cores shifts to our core exchange program.

Long-term core inventory is recorded at the lower of cost or market value. In the absence of sufficient recent purchases, we use core broker price lists to assess whether Used Core cost exceeds Used Core market value on an item by item basis. The primary reason for the insufficient recent purchases is that we obtain most of our Used Core inventory from the customer core exchange program.

We classify all of our core inventories as long-term assets. The determination of the long-term classification is based on our view that the value of the cores is not consumed or realized in cash during our normal operating cycle, which is one year for most of the cores recorded in inventory. According to guidance provided under the FASB ASC, current assets are defined as “assets or resources commonly identified as those which are reasonably expected to be realized in cash or sold or consumed during the normal operating cycle of the business.” We do not believe that core inventories, which we classify as long-term, are consumed because the credits issued upon the return of Used Cores offset the amounts invoiced when the Remanufactured Cores included in finished goods were sold. We do not expect the core inventories to be consumed, and thus we do not expect to realize cash, until our relationship with a customer ends, a possibility that we consider remote based on existing long-term customer agreements and historical experience.

However, historically for a portion of finished goods sold, our customer will not send us a Used Core to obtain the credit we offer under our core exchange program. Therefore, based on our historical estimate, we derecognize the core value for these finished goods upon sale, as we believe they have been consumed and we have realized cash.

We realize cash for only the core exchange program shortfall. This shortfall represents the historical difference between the number of finished goods shipped to customers and the number of Used Cores returned to us by customers. We do not realize cash for the remaining portion of the cores because the credits issued upon the return of Used Cores offset the amounts invoiced when the Remanufactured Cores included in finished goods were sold. We do not expect to realize cash for the remaining portion of these cores until our relationship with a customer ends, a possibility that we consider remote based on existing long-term customer agreements and historical experience.

For these reasons, we concluded that it is more appropriate to classify core inventory as long-term assets.

#### Long-term Core Inventory Deposit

The long-term core inventory deposit account represents the value of Remanufactured Cores we have purchased from customers, which are held by the customers and remain on the customers’ premises. The purchase is made through the issuance of credits against that customer’s receivables either on a one time basis or over an agreed-upon period. The credits against the customer’s receivable are based upon the Remanufactured Core purchase price previously established with the customer. At the same time, we record the long-term core inventory deposit for the Remanufactured Cores purchased at its cost, determined as noted under Long-term Core Inventory. The long-term core inventory deposit is stated at the lower of cost or market. The cost is established at the time of the transaction based on the then current cost, determined as noted under Long-term Core Inventory. The difference between the credit granted and the cost of the long-term core inventory deposit is treated as a sales allowance reducing revenue. When the purchases are made over an agreed-upon period, the long-term core inventory deposit is recorded at the same time the credit is issued to the customer for the purchase of the Remanufactured Cores.

At least annually, and as often as quarterly, reconciliations and confirmations are performed to determine that the number of Remanufactured Cores purchased, but retained at the customer locations, remains sufficient to support the amounts recorded in the long-term core inventory deposit account. At the same time, the mix of Remanufactured Cores is reviewed to determine that the aggregate value of Remanufactured Cores in the account has not changed during the reporting period. We evaluate the cost of Remanufactured Cores supporting the aggregate long-term core inventory deposit account each quarter. If we identify any permanent reduction in either the number or the aggregate value of the Remanufactured Core inventory mix held at the customer location, we will record a reduction in the long-term core inventory deposit account during that period.

### Customer Core Returns Accrual

The estimated fair value of the customer core return liabilities assumed by us in connection with the Fenco acquisition is included in customer core returns accrual. We classify the portion of core liability related to the core inventory purchased and on the shelves of our customers as long-term liabilities. Upon the sale of a Remanufactured Core a core liability is created to record the obligation to provide our customer with a credit upon the return of a like core by the customer. Since the return of a core is based on the sale of a remanufactured automobile part to an end user of our customer, the offset to this core liability generated by its return to us by our customer is usually followed by the sale of a replacement remanufactured auto part, and thus a portion of the core liability is continually outstanding and is recorded as long-term. The amount we have classified as long-term is the portion that management projects will remain outstanding for an uninterrupted period extending one year from the balance sheet date.

### Revenue Recognition

We recognize revenue when our performance is complete, and all of the following criteria have been met:

- Persuasive evidence of an arrangement exists,
- Delivery has occurred or services have been rendered,
- The seller’s price to the buyer is fixed or determinable, and
- Collectability is reasonably assured.

For products shipped free-on-board (“FOB”) shipping point, revenue is recognized on the date of shipment. For products shipped FOB destination, revenues are recognized on the estimated or actual date of delivery. We include shipping and handling charges in the gross invoice price to customers and classify the total amount as revenue. Shipping and handling costs are recorded in cost of sales.

#### Revenue Recognition; Net-of-Core-Value Basis

The price of a finished product sold to customers is generally comprised of separately invoiced amounts for the Remanufactured Core included in the product (“Remanufactured Core value”) and the unit value. The unit value is recorded as revenue based on our then current price list, net of applicable discounts and allowances. Based on our experience, contractual arrangements with customers and inventory management practices, a significant portion of the remanufactured automobile parts we sell to customers are replaced by similar Used Cores sent back for credit by customers under our core exchange program. In accordance with our net-of-core-value revenue recognition policy, we do not recognize the Remanufactured Core value as revenue when the finished products are sold. We generally limit the number of Used Cores sent back under the core exchange program to the number of similar Remanufactured Cores previously shipped to each customer.

#### Revenue Recognition and Deferral — Core Revenue

Full price Remanufactured Cores: When we ship a product, we invoice certain customers for the Remanufactured Core value portion of the product at full Remanufactured Core sales price but do not recognize revenue for the Remanufactured Core value at that time. For these Remanufactured Cores, we recognize core revenue based upon an estimate of the rate at which our customers will pay cash for Remanufactured Cores in lieu of sending back similar Used Cores for credits under our core exchange program.

Nominal price Remanufactured Cores: We invoice other customers for the Remanufactured Core value portion of product shipped at a nominal Remanufactured Core price. Unlike the full price Remanufactured Cores, we only recognize revenue from nominal Remanufactured Cores not expected to be replaced by a similar Used Core sent back under the core exchange program when we believe that we have met all of the following criteria:

- We have a signed agreement with the customer covering the nominally priced Remanufactured Cores not expected to be sent back under the core exchange program, and the agreement must specify the number of Remanufactured Cores our customer will pay cash for in lieu of sending back a similar Used Core under our core exchange program and the basis on which the nominally priced Remanufactured Cores are to be valued (normally the average price per Remanufactured Core stipulated in the agreement).
- The contractual date for reconciling our records and customer’s records of the number of nominally priced Remanufactured Cores not expected to be replaced by similar Used Cores sent back under our core exchange program must be in the current or a prior period.
- The reconciliation must be completed and agreed to by the customer.
- The amount must be billed to the customer.

Deferral of Core Revenue. As noted previously, we have in the past and may in the future agree to buy back Remanufactured Cores from certain customers. The difference between the credit granted and the cost of the Remanufactured Cores bought back is treated as a sales allowance reducing revenue. As a result of the ongoing Remanufactured Core buybacks, we have now deferred core revenue from these customers until there is no expectation that sales allowances associated with Remanufactured Core buybacks from these customers will offset core revenues that would otherwise be recognized once the criteria noted above have been met.

#### Revenue Recognition; General Right of Return

We allow our customers to return goods to us that their end-user customers have returned to them, whether the returned item is or is not defective (warranty returns). In addition, under the terms of certain agreements with our customers and industry practice, our customers from time to time are allowed stock adjustments when their inventory of certain product lines exceeds the anticipated sales to end-user customers (stock adjustment returns). We seek to limit the aggregate of customer returns, including warranty and stock adjustment returns, to less than 20% of unit sales. In some instances, we allow a higher level of returns in connection with a significant update order.

We provide for such anticipated returns of inventory by reducing revenue and the related cost of sales for the units estimated to be returned.

Our allowance for warranty returns is established based on a historical analysis of the level of this type of return as a percentage of total unit sales. Stock adjustment returns do not occur at any specific time during the year, and the expected level of these returns cannot be reasonably estimated based on a historical analysis. Our allowance for stock adjustment returns is based on specific customer inventory levels, inventory movements and information on the estimated timing of stock adjustment returns provided by our customers.

### Sales Incentives

We provide various marketing allowances to our customers, including sales incentives and concessions. Marketing allowances related to a single exchange of product are recorded as a reduction of revenues at the time the related revenues are recorded or when such incentives are offered. Other marketing allowances, which may only be applied against future purchases, are recorded as a reduction to revenues in accordance with a schedule set forth in the relevant contract. Sales incentive amounts are recorded based on the value of the incentive provided.

### Goodwill

Goodwill is the excess of the purchase price over the fair value of identifiable net assets acquired in business combinations. Goodwill is not amortized, but rather is tested for impairment at least annually or more frequently if there are indicators of impairment present.

We perform the annual goodwill impairment analysis in the fourth quarter of each fiscal year. We evaluate whether goodwill has been impaired at the reporting unit level by first determining whether the estimated fair value of the reporting unit is less than its carrying value and, if so, by determining whether the implied fair value of goodwill within the reporting unit is less than the carrying value. We determined the fair value of the reporting unit based on an equal weightings of: (1) a discounted cash flow method, (2) guideline company method, and (3) guideline transaction method. The discounted cash flow analysis establishes fair value by estimating the present value of the projected future cash flows of a reporting unit and applying a 3% terminal growth rate. The present value of estimated discounted future cash flow is determined using significant estimates of revenue and costs for the reporting unit, driven by assumed growth rates, as well as appropriate discount rates. The discount rate of 14% was determined using a weighted average cost of capital that incorporates long term government bonds, effective cost of debt, and the cost of equity of similar guideline companies. The market approach is calculated using market multiples and comparable transaction data for guideline companies. The guideline information was based on publicly available information. A valuation multiple was selected based on a financials benchmarking analysis that compared to the reporting unit’s benchmark results with the guideline information. In addition to these financial considerations, qualitative factors such as business descriptions, market served, and profitability were considered in the ultimate selection of the multiple used to estimate a value on a minority basis. The selection and weighting of the various fair value techniques may result in a higher or lower fair value. Judgment is applied in determining the weightings that are most representative of fair value. Management has performed sensitivity analysis on its significant assumption and has determined that a change in its assumptions within selected sensitivity testing levels would not impact its conclusion. Based on the results of our annual analysis of goodwill in fiscal 2012, the reporting unit’s fair value exceeded its carrying value by a significant amount, indicating that there was no goodwill impairment.

### Income Taxes

We account for income taxes using the liability method, which measures deferred income taxes by applying enacted statutory rates in effect at the balance sheet date to the differences between the tax basis of assets and liabilities and their reported amounts in the financial statements. The resulting asset or liability is adjusted to reflect changes in the tax laws as they occur. A valuation allowance is provided to reduce deferred tax assets when it is more likely than not that a portion of the deferred tax asset will not be realized.

The primary components of our income tax provision (benefit) are (i) the current liability or refund due for federal, state and foreign income taxes and (ii) the change in the amount of the net deferred income tax asset, including the effect of any change in the valuation allowance.

Realization of deferred tax assets is dependent upon our ability to generate sufficient future taxable income. Management reviews the Company’s deferred tax assets on a jurisdiction by jurisdiction basis to determine whether it is more likely than not that the deferred tax assets will be realized. As a result of FAPL's cumulative losses in certain jurisdictions, a determination was made to establish a valuation allowance against the related deferred tax assets as it is not more likely than not that such assets will be realized. For all other jurisdictions, management believes that it is more likely than not that future taxable income will be sufficient to realize the recorded deferred tax assets. In evaluating this ability, management considers long-term agreements and Remanufactured Core purchase obligations with our major customers that expire at various dates through March 2019. Management also periodically compares the forecasts to actual results. Even though there can be no assurance that the forecasted results will be achieved, the history of income in all other jurisdictions provides sufficient positive evidence that no valuation allowance is needed.

### Financial Risk Management and Derivatives

We are exposed to market risk from material movements in foreign exchange rates between the U.S. dollar and the currencies of the foreign countries in which we operate. As a result of our significant operations in Mexico, our primary risk relates to changes in the rates between the U.S. dollar and the Mexican peso. To mitigate this currency risk, we enter into forward foreign exchange contracts to exchange U.S. dollars for Mexican pesos. The extent to which we use forward foreign exchange contracts is periodically reviewed in light of our estimate of market conditions and the terms and length of anticipated requirements. The use of derivative financial instruments allows us to reduce our exposure to the risk that the eventual net cash outflow resulting from funding the expenses of the foreign operations will be materially affected by changes in the exchange rates. We do not engage in currency speculation or hold or issue financial instruments for trading purposes. These contracts generally expire in a year or less. Any changes in the fair value of foreign exchange contracts are accounted for as an increase or decrease to general and administrative expenses in current period earnings.

### Share-based Payments

In accounting for share-based compensation awards, we follow the accounting guidance for equity-based compensation, which requires that we measure the cost of employee services received in exchange for an award of equity instruments based on the grant-date fair value of the award. The cost associated with stock options is estimated using the Black-Scholes option-pricing model. The cost of equity instruments is recognized in the consolidated statement of income on a straight-line basis (net of estimated forfeitures) over the period during which an employee is required to provide service in exchange for the award. Also, excess tax benefits realized are reported as a financing cash inflow.

On August 22, 2012, we entered into an agreement to issue a warrant to a Supplier, under which it may purchase up to 516,129 shares of our common stock for an initial exercise price of $7.75 per share, exercisable at any time after two years from August 22, 2012 and on or prior to September 30, 2017, provided that if any obligations under the Fenco Credit Line remain outstanding as of August 1, 2017, such date will be the date that is three months after the date that all obligations under the Fenco Credit Line have been repaid in full.

### New Accounting Pronouncements

#### Comprehensive Income

In June 2011, the FASB issued guidance which requires an entity to present the total of comprehensive income, the components of net income, and the components of other comprehensive income either in a single continuous statement of comprehensive income, or in two separate but consecutive statements. This guidance eliminates the option to present components of other comprehensive income as a part of the statement of equity. This guidance should be applied, retrospectively, for fiscal years, and interim periods within those fiscal years, beginning after December 15, 2011. Other than the change in presentation, we have determined the changes from the adoption of this guidance on April 1, 2012 will not have an impact on our consolidated financial position and the results of operations.

#### Testing Goodwill for Impairment

In September 2011, the FASB issued an amendment which gives an entity the option to first assess qualitative factors to determine whether the existence of events or circumstances leads to a determination that it is more likely than not that the fair value of a reporting unit is less than its carrying amount. If an entity determines that it is not more likely than not that the fair value of a reporting unit is less than its carrying amount, then performing the two-step goodwill impairment test is unnecessary. If an entity determines that it is more likely than not that the fair value of a reporting unit is less than its carrying amount, then it is required to perform the first step of the two-step goodwill impairment test. If the carrying value of the reporting unit exceeds its fair value, then the entity is required to perform the second step of the goodwill impairment test to measure the amount of the impairment loss, if any. The amendments are effective for annual and interim goodwill impairment tests performed for fiscal years beginning after December 15, 2011. Early adoption is permitted if an entity’s financial statements for the most recent annual or interim period have not yet been issued. The adoption of this guidance on April 1, 2012 is not expected to have any impact on our consolidated financial position and the results of operations.

### Subsequent Events

#### Equity Transaction

In April 2012, we entered into a Subscription Agreement to raise $15,004,000 in gross proceeds and net proceeds of $14,100,000 after expenses, through a private placement of our common stock. Pursuant to the terms of the Subscription Agreement, certain accredited investors purchased an aggregate of 1,936,000 shares of common stock in a private placement exempt from registration under the Securities Act in reliance upon Rule 506 of Regulation D, for a purchase price of $7.75 per share. We plan to use the proceeds to enhance the integration of our Fenco acquisition and for general corporate purposes.

Pursuant to the Subscription Agreement, we agreed to file a registration statement with the SEC to register for resale the common stock sold in the private placement not later than 45 days after the closing of the private placement and to use commercially reasonable efforts to cause such registration statement to be declared effective, subject to certain exceptions, within 60 days of closing (or 120 days in the event of an SEC review). On June 12, 2012, we filed a registration statement on Form S-1 under the Securities Act of 1933 to register the shares of common stock, which is not effective.

#### Parent Company Credit Agreement

Our revolving credit and term loan agreement, as amended, (the “ Old Parent Company Credit Agreement”), with Union Bank, N.A. and Branch Banking & Trust Company, allowed us to borrow up to a total of $60,000,000 (the “Old Parent Company Credit Facility”). The Old Parent Company Credit Facility was comprised of (i) a revolving facility with a $7,000,000 letter of credit sub-facility and (ii) a term loan. We were able to borrow on a revolving basis up to an amount equal to $50,000,000 minus all outstanding letter of credit obligations (the “Old Parent Company Revolving Loan”). The term loan was in the principal amount of $10,000,000 (the “Old Parent Company Term Loan”).

The Old Parent Company Term Loan was scheduled to mature in October 2014 and required principal payments of $500,000 on a quarterly basis. The Old Parent Company Revolving Loan was scheduled to expire in October 2012 and provided us the option to request up to two one-year extensions.

In January 2012, we replaced the Old Parent Company Credit Agreement by entering into a new parent company financing agreement (the “New Parent Company Financing Agreement”) with a syndicate of lenders, Cerberus Business Finance, LLC, as collateral agent, and PNC Bank, National Association, as administrative agent (the “New Parent Company Loans”). The New Parent Company Loans consist of: (i) term loans aggregating $75,000,000 (the “New Parent Company Term Loans”) and (ii) revolving loans of up to $20,000,000, subject to borrowing base restrictions and a $10,000,000 sublimit for letters of credit (the “New Parent Company Revolving Loans,”). The lenders hold a security interest in substantially all of the assets of our rotating electrical segment. As permitted by the New Parent Company Financing Agreement, we subsequently raised $15,000,000 of capital. The New Parent Company Financing Agreement permits us to invest up to $20,000,000 in Fenco.

The New Parent Company Term Loans require quarterly principal payments of $250,000 beginning on October 1, 2012 through July 1, 2013, and quarterly principal payments of $1,000,000 beginning on October 1, 2013. The New Parent Company Loans mature on January 17, 2017.

A portion of the proceeds from the New Parent Company Term Loans was used to repay all amounts outstanding under the Old Parent Company Credit Facility, and the Old Parent Company Credit Agreement was terminated.

In May 2012, we entered into a second amendment to the new parent company financing agreement (the “Second Amendment”) and borrowed an additional $10,000,000, for an aggregate of $85,000,000 (the “Amended New Parent Company Term Loans”), in term loans. The Second Amendment, among other things, modified the interest rates per annum applicable to the Amended New Parent Company Term Loans. The Amended New Parent Company Term Loans will bear interest at rates equal to, at our option, either LIBOR plus 8.5% or a base rate plus 7.5%. The Amended New Parent Company Term Loans require quarterly principal payments of $250,000 beginning on October 1, 2012 and increase to $600,000 per quarter on April 1, 2013 and to $1,350,000 on October 1, 2013 until the final maturity date. Among other things, the Second Amendment provides for certain amended financial covenants, and requires that we maintain cash and cash equivalents of up to $10,000,000 in the aggregate until our obligations with respect to a significant supplier have ceased.

In connection with the Second Amendment, we also issued a warrant (the “Warrant”) to Cerberus Business Finance, LLC. Pursuant to the Warrant, Cerberus Business Finance, LLC, may purchase up to 100,000 shares of our common stock for an initial exercise price of $17.00 per share for a period of five years. The exercise price is subject to adjustments, among other things, for sales of common stock by us at a price below the exercise price. Further, if the exercise price of the Warrant is reduced, then the number of common stock shares that may be purchased upon the exercise of the Warrant will be increased so that the aggregate exercise price of the Warrant after the adjustment is the same as the aggregate exercise price prior the adjustment of $1,700,000. The fair value of the Warrant at the date of grant was estimated to be approximately $607,000 using the Monte Carlo simulation model. This amount will be recorded as a warrant liability and any subsequent changes in fair value of this Warrant will be recorded in current period earnings as a general and administrative expense. The following assumptions were used to calculate the fair value of the warrants: dividend yield of 0%; expected volatility of 56.29%; risk-free interest rate of 0.77%; subsequent financing probability of 75%; and an expected life of 5 years.

In August 2012, we entered into a third amendment and waiver to the new parent company financing agreement (the “Third Amendment”) which, among other things, (i) permitted us to enter into the strategic cooperation agreement described below, (ii) to make additional investments in Fenco in an aggregate amount outstanding not to exceed $20,000,000 at any time, (iii) added additional reporting requirements regarding financial reports and material notices under the strategic cooperation agreement described below, (iv) waived certain defaults arising as a result of our failure to comply with certain reporting requirements until September 17, 2012, and (v) removed the Second Amendment requirement that we maintain cash and cash equivalents of up to $10,000,000. In September 2012, we obtained an additional waiver to further extend the due date for submitting certain financial reports to October 1, 2012.

#### Fenco Credit Agreement

In connection with the acquisition of Fenco, our now wholly-owned subsidiaries, FAPL and Introcan, as borrowers (the “Fenco Borrowers”), entered into an amended and restated credit agreement, dated May 6, 2011 (the “Fenco Credit Agreement”) with Manufacturers and Traders Trust Company as lead arranger, M&T Bank as lender and administrative agent and the other lenders from time to time party thereto (the “Fenco Lenders”). Pursuant to the Fenco Credit Agreement, the Fenco Lenders have made available to the Fenco Borrowers a revolving credit facility in the maximum principal amount of $50,000,000 (the “Fenco Revolving Facility”) and a term loan in the principal amount of $10,000,000 (the “Fenco Term Loan”). The availability of the Fenco Revolving Facility is subject to a borrowing base calculation consisting of eligible accounts receivable and eligible inventory.

The Fenco Revolving Facility and the Fenco Term Loan mature on October 6, 2012, but may be accelerated upon the occurrence of an insolvency event or event of default under the Fenco Credit Agreement. On May 11, 2012, the maturity date of the Fenco Revolving Facility and the Fenco Term Loan was extended to May 13, 2013.

In August 2012, Fenco entered into a second amendment to the Fenco credit agreement (the “Fenco Second Amendment”) with the Fenco lenders which, among other things, (i) extended the maturity date to October 6, 2014, (ii) amended the maximum amount of the revolving facility to (y) $55,000,000 for the period up to and including December 31, 2012 and (z) $50,000,000 for the period on or after January 1, 2013 through October 6, 2014, (iii) replaced the repayment schedule and the amounts for the term loan to require quarterly principal payments of $500,000 beginning on June 30, 2013 and increasing to $1,000,000 per quarter beginning December 31, 2013 through September 30, 2014, and the remaining unpaid principal amount is due on the final maturity date, (iv) waived certain defaults arising as a result of Fenco’s failure to comply with certain financial covenants and reporting requirements until September 17, 2012, (v) provided for certain mandatory prepayments of the term loan, and (vi) revised certain financial covenants regarding minimum EBITDA, minimum fixed charge coverage, unused borrowing availability under the Fenco revolving credit facility, and maximum capital expenditures. In September 2012, we obtained an additional waiver to further extend the due date for submitting audited financial statements to October 1, 2012.

#### Strategic Cooperation Agreement

In August 2012, we entered into a revolving credit/strategic cooperation agreement (the “Agreement”) with the Supplier and FAPL. Under the terms of the Agreement, the Supplier agreed to provide a revolving credit line for purchases of automotive parts and components by FAPL in an aggregate principal amount not to exceed $22,000,000 (the “Fenco Credit Line”), of which $2,000,000 will only be available for accrued interest and other amounts payable (the “Obligations”). Payment for all purchases will be due and payable 120 days after the date of the bill of lading. Any amounts remaining unpaid following the due date will bear interest at a rate of 1% per month. The Fenco Credit Line will mature on July 31, 2017. Among other things, the Agreement requires that FAPL on an annual basis, purchase at least approximately $33,000,000 of new automotive parts and components. After July 1, 2014, the Supplier has the right to settle up to $8,000,000 (the “Receivable Sale Option”) of our outstanding Obligations in exchange, at our option, for (i) shares of our common stock valued at $7.75 per share, subject to certain adjustments, or (ii) cash in an amount equal to 135% of the amount of the outstanding Obligations sold to us. The obligations under the Agreement are guaranteed by us and certain of our subsidiaries.

In connection with this Agreement, we also issued a warrant (the “Supplier Warrant”) to the Supplier to purchase up to 516,129 shares of our common stock for an initial exercise price of $7.75 per share exercisable at any time after two years from August 22, 2012 and on or prior to September 30, 2017. The exercise price is subject to adjustments, among other things, for sales of common stock by us at a price below the exercise price. Any outstanding Obligations settled by the Supplier will reduce the Fenco Credit Line. We are obligated to issue no more than an aggregate of 1,032,258 shares of our common stock in connection with the Receivable Sale Option and Supplier Warrant. The Obligations under this Agreement are subordinated to our obligations under the new parent company financing agreement. The preliminary fair value of the warrants at the date of grant was estimated to be approximately $1,018,000 using the Monte Carlo simulation model. This amount will be recorded as a warrant liability and any subsequent changes in fair value of this Supplier Warrant will be recorded in current period earnings as a general and administrative expense. The following assumptions were used to calculate the preliminary fair value of the warrants: dividend yield of 0%; expected volatility of 56.28%; risk-free interest rate of 0.71%; no likelihood of subsequent financing; and an expected life of 5.11 years.

### Results of Operations

The following discussion and analysis should be read in conjunction with the financial statements and notes thereto appearing elsewhere herein. The acquisition of Fenco on May 6, 2011 has had a significant impact on the comparability of results as discussed below. As a result of this acquisition, we reassessed and revised our segment reporting to reflect two reportable segments, rotating electrical and under-the-car product line, based on the way we manage, evaluate and internally report our business activities.

The following table summarizes certain key operating data for the periods indicated:

| Fiscal Years Ended March 31, 2012 | Rotating Electrical | Under-the-Car Product Line | Consolidated |
| --- | ---: | ---: | ---: |
| Gross profit percentage | 31.8% | (16.0 ) % | 7.6% |
| Cash flow provided by (used in) operations | $15,464,000 | $(53,952,000) | $(38,488,000) |
| Finished goods turnover (1) | 6.5 | 3.7 | 4.4 |
| Return on equity (2) | - | - | (41.4 ) % |
| **2011** |  |  |  |
| Gross profit percentage | 31.9% | -% | 31.9% |
| Cash flow provided by operations | $10,735,000 | $- | $10,735,000 |
| Finished goods turnover (1) | 5.2 | - | 5.2 |
| Return on equity (2) | - | - | 11.8% |
| **2010** |  |  |  |
| Gross profit percentage | 28.1% | -% | 28.1% |
| Cash flow provided by operations | $18,347,000 | $- | $18,347,000 |
| Finished goods turnover (1) | 5.0 | - | 5.0 |
| Return on equity (2) | - | - | 10.4% |

(1) Finished goods inventory turnover is calculated by dividing the cost of goods sold for the year by the average between beginning and ending non-core finished goods inventory values, for each fiscal year. We believe that this provides a useful measure of our ability to turn production into revenues.

(2) Return on equity is computed as net income for the fiscal year divided by shareholders’ equity at the beginning of the fiscal year and measures our ability to invest shareholders’ funds profitably.

### Fiscal 2012 Compared to Fiscal 2011

### Net Sales and Gross Profit

The following table summarizes net sales and gross profit by segment for fiscal 2012 and fiscal 2011:

| Fiscal Years Ended March 31, 2012 | Rotating Electrical | Under-the-Car Product Line | Eliminations | Consolidated |
| --- | ---: | ---: | ---: | ---: |
| Net sales to external customers | $178,551,000 | $185,136,000 | $- | $363,687,000 |
| Intersegment revenue, net of cost | 1,853,000 | - | (1,853,000) | - |
| Cost of goods sold | 123,072,000 | 214,761,000 | (1,853,000) | 335,980,000 |
| Gross profit (loss) | 57,332,000 | (29,625,000) | - | 27,707,000 |
| Cost of goods sold as a percentage of net sales | 68.2% | 116.0% | - | 92.4% |
| Gross profit (loss) percentage | 31.8% | (16.0 ) % | - | 7.6% |
| **2011** |  |  |  |  |
| Net sales | $161,285,000 | $- | $- | $161,285,000 |
| Cost of goods sold | 109,903,000 | - | - | 109,903,000 |
| Gross profit | 51,382,000 | - | - | 51,382,000 |
| Cost of goods sold as a percentage of net sales | 68.1% | - | - | 68.1% |
| Gross profit percentage | 31.9% | - | - | 31.9% |

*Net Sales*. Our consolidated net sales for fiscal 2012 increased by $202,402,000, or 125.5%, to $363,687,000 compared to consolidated net sales for fiscal 2011 of $161,285,000. The increase in consolidated net sales was due primarily to (i) our May 6, 2011 acquisition of Fenco which resulted in additional net sales of $185,136,000 or 114.8%, and (ii) an increase in sales to customers of $17,266,000 or 10.7%, primarily to the existing customers in our rotating electrical product line.

*Cost of Goods Sold/Gross Profit.* Our consolidated cost of goods sold as a percentage of consolidated net sales increased during fiscal 2012 to 92.4% from 68.1% for fiscal 2011, resulting in a corresponding decrease in our consolidated gross profit percentage of 24.3% to 7.6% for fiscal 2012 from 31.9% for fiscal 2011.

- *Rotating Electrical product line*

The gross profit percentage in our rotating electrical product line remained relatively flat at 31.8% during fiscal 2012 compared to 31.9% during fiscal 2011.

- *Under-the-car product line*

The gross profit percentage in our under-the-car product line was negative 16.0% for fiscal 2012 representing a negative gross profit of $29,625,000. This negative gross profit was due in part to low net sales prices and in part to higher production, warehousing and distribution costs. The net sales prices were lower primarily due to higher customer allowances and fill rate performance penalties. Higher production, warehousing and distribution costs were due to the increase in under-absorption of manufacturing overhead on lower sales and production levels and the additional premium purchase and freight costs expended in the improving of our fill rates and ability to service our customers. As we integrate the Fenco business, we are addressing future pricing and the efficiency of the manufacturing operations and implementing cost savings initiatives for production, warehousing, and distribution.

Our gross profit was also significantly impacted by our decision to discontinue the CV axle product line. We substantially reduced sales and support in December 2011, and closed the main production facility for this product line in February 2012. The negative gross profit impact of the discontinued line was $10,850,000 including (i) the negative contribution from the product line in the period of $5,332,000 and (ii) the recording of the additional reserve of $4,861,000 for the core and raw material inventory to reduce the cost to net realizable value.

In addition, our gross profit during fiscal 2012, was further impacted by (i) negative contribution of $1,074,000 related to certain additional product lines we stopped selling and supporting in December 2011, (ii) additional costs of approximately $928,000 that were incurred in connection with the modification of a product for a new customer program, (iii) contractual customer penalties of $4,795,000, (iv) a one-time pricing allowance of $1,851,000, and (v) sales allowance associated with the buy-back of certain products of $1,283,000.

To improve customer service, plant productivity and product quality levels we also incurred additional expenses that impacted our gross profit percentage as follows:

- In order to improve our quality and productivity levels, we replaced and trained a large number of personnel at Fenco’s production facilities at Monterrey, Mexico at an approximate cost of $4,198,000
- To expedite improvement of customer service levels, we made certain inventory purchases above our normal cost for $2,519,000 for inventory that was sold during fiscal 2012, and we incurred increased inbound freight expenses of $785,000

Finally, in connection with the Fenco acquisition, $3,746,000 was charged to cost of goods sold in our under-the-car product line related to the entire amount of fair value step-up of inventory acquired which was sold during the year ended March 31, 2012.

Excluding the impact of the above items related to the under-the-car product line, the gross profit for fiscal 2012, would have been 1.3%. We anticipate that the gross profit will be improved after implementation of our planned cost savings initiatives for production, warehousing, and distribution.

### Operating Expenses

The following table summarizes operating expenses by segment for the fiscal 2012 and 2011:

| Fiscal Years Ended March 31, 2012 | Rotating Electrical | Under-the-Car Product Line | Eliminations | Consolidated |
| --- | ---: | ---: | ---: | ---: |
| General and administrative | $20,621,000 | $18,260,000 | $- | $38,881,000 |
| Sales and marketing | 7,659,000 | 5,145,000 | - | 12,804,000 |
| Research and development | 1,765,000 | - | - | 1,765,000 |
| Impairment of plant and equipment | - | 1,031,000 | - | 1,031,000 |
| Acquisition costs | 713,000 | - | - | 713,000 |
| **Percent of net sales** |  |  |  |  |
| General and administrative | 11.5% | 9.9% | - | 10.7% |
| Sales and marketing | 4.3% | 2.8% | - | 3.5% |
| Research and development | 1.0% | - | - | 0.5% |
| Impairment of plant and equipment | - | 0.6% | - | 0.3% |
| Acquisition costs | 0.4% | - | - | 0.2% |
| **2011** |  |  |  |  |
| General and administrative | $17,033,000 | $- | $- | $17,033,000 |
| Sales and marketing | 6,537,000 | - | - | 6,537,000 |
| Research and development | 1,549,000 | - | - | 1,549,000 |
| Acquisition costs | 879,000 | - | - | 879,000 |
| **Percent of net sales** |  |  |  |  |
| General and administrative | 10.6% | - | - | 10.6% |
| Sales and marketing | 4.1% | - | - | 4.1% |
| Research and development | 1.0% | - | - | 1.0% |
| Acquisition costs | 0.5% | - | - | 0.5% |

*General and Administrative.* Our consolidated general and administrative expenses for fiscal 2012 were $38,881,000, which represents an increase of $21,848,000, or 128.3%, from general and administrative expenses for fiscal 2011 of $17,033,000. The increase of $3,588,000 in general and administrative expenses for our rotating electrical product line during fiscal 2012 was primarily due to (i) $1,292,000 of professional services and travel incurred in connection with our Fenco operations, (ii) $780,000 of incentive payments made to certain employees in connection with our Fenco acquisition, (iii) $393,000 of increased professional services , (iv) a loss of $476,000 recorded due to the changes in the fair value of forward foreign currency exchange contracts, compared to a loss of $162,000 recorded during fiscal 2011, and (v) $303,000 of decreased amortization of the deferred gain on sale-leaseback transactions.

General and administrative expenses for the under-the-car product line during fiscal 2012 were $18,260,000, and were primarily attributable to (i) $7,856,000 of employee-related expenses, (ii) $4,496,000 of professional services fees and other consulting fees, (iii) $1,965,000 of depreciation and amortization of intangible assets, (iv) $325,000 of bank financing charges, and (v) $97,000 for legal and professional fees incurred in connection with the Fenco Credit Agreement.

*Sales and Marketing*. Our consolidated sales and marketing expenses for fiscal 2012 increased $6,267,000, or 95.9%, to $12,804,000 from $6,537,000 fiscal 2011. The increase of $1,122,000 from our rotating electrical product line was due primarily to (i) $343,000 of increased commissions due to increased sales, (ii) $314,000 of increased employee-related expenses, (iii) $238,000 of increased travel and professional services incurred in connection with our Fenco operations, (iv) the benefit from the reversal of $193,000 of commission expenses during the prior year in connection with our August 2009 acquisition as certain sales thresholds were not met, and (v) $104,000 of increased trade show expense.

Sales and marketing expenses for the under-the-car product line were $5,145,000 and primarily include (i) $1,796,000 of employee-related expenses, (ii) $1,482,000 of advertising expenses, (iii) $980,000 of sales commissions and agent fees, and (iv) $873,000 of travel expenses.

*Research and Development*. Our consolidated research and development expenses increased by $216,000, or 13.9%, to $1,765,000 for fiscal 2012 from $1,549,000 for fiscal 2011. The increase in research and development expenses in our rotating electrical product line was due primarily to (i) $128,000 of increased supplies expense, (ii) $61,000 of increased travel, and (iii) $39,000 of increased employee-related expenses during fiscal 2012.

*Impairment of plant and equipment*. Represents the write-off of the carrying amount of plant and equipment as we discontinued the CV axle product line and shut-down the related facility located in Bedford, New Hampshire during fiscal 2012.

*Acquisition Costs*. We incurred $713,000 of legal and professional fees in connection with the Fenco acquisition during fiscal 2012.

### Interest Expense

*Interest Expense.* Reflecting our increased leverage as a result of the acquisition of Fenco and the increase in the size of our business, net consolidated interest expense for fiscal 2012 increased $8,900,000, or 166.2%, to $14,255,000 from $5,355,000 fiscal 2011. This increase in net interest expense was primarily attributable to (i) interest expense incurred on the outstanding loan balances and the cost of receivables being discounted under the receivable discount programs by the under-the-car product line since our acquisition on May 6, 2011 and (ii) increased outstanding loan balances and higher interest rates incurred by the rotating electrical product line during fiscal 2012.

### Provision for Income Taxes

*Income Tax*. Our income tax expense was $6,772,000 and $7,809,000 during fiscal 2012 and 2011, respectively, an effective rate of (16%) and 39% for fiscal 2012 and 2011, respectively. The primary change in the effective tax rate was due to not recognizing income tax benefits related to the net losses of the Fenco operations. Income tax expense, excluding the net losses of the Fenco operations, reflect income tax rates higher than the federal statutory tax rates primarily due to state income taxes, which were partially offset by the benefit of lower statutory tax rates in other foreign taxing jurisdictions.

In addition, any potential future income tax benefits associated with the net loss we incurred from Fenco operations during fiscal 2012 was not recognized due primarily to our assessment of the recoverability of these tax benefits. We have provided a valuation allowance against these net operating loss carryforwards as we determined that it is not more likely than not that the deferred asset will be realized. During fiscal 2012, we recorded $165,000 of income tax expense specifically related to the Fenco subsidiaries located in Mexico, a separate tax jurisdiction.

### Fiscal 2011 Compared to Fiscal 2010

### Net Sales and Gross Profit

The following table summarizes net sales and gross profit by segment for fiscal 2011 and 2010:

| Fiscal Years Ended March 31, 2011 | Rotating Electrical | Under-the-Car Product Line | Eliminations | Consolidated |
| --- | ---: | ---: | ---: | ---: |
| Net sales | $161,285,000 | $- | $- | $161,285,000 |
| Cost of goods sold | 109,903,000 | - | - | 109,903,000 |
| Gross profit | 51,382,000 | - | - | 51,382,000 |
| Cost of goods sold as a percentage of net sales | 68.1% | - | - | 68.1% |
| Gross profit percentage | 31.9% | - | - | 31.9% |
| **2010** |  |  |  |  |
| Net sales | $147,225,000 | $- | $- | $147,225,000 |
| Cost of goods sold | 105,898,000 | - | - | 105,898,000 |
| Gross profit | 41,327,000 | - | - | 41,327,000 |
| Cost of goods sold as a percentage of net sales | 71.9% | - | - | 71.9% |
| Gross profit percentage | 28.1% | - | - | 28.1% |

*Net Sales*. Net sales during fiscal 2011 increased by $14,060,000, or 9.6%, to $161,285,000 compared to net sales during fiscal 2010 of $147,225,000. The increase in our net sales was primarily due to increased sales to our existing and several new customers we acquired during fiscal 2011, In addition, our fiscal 2011 net sales reflect the full year impact of net sales to customers we acquired as a result of our August 2009 acquisition. Also, we recorded revenue, net of cost, of $378,000 in connection with our consignment agreement.

*Cost of Goods Sold/Gross Profit.* Cost of goods sold as a percentage of net sales decreased during fiscal 2011 to 68.1% from 71.9% in fiscal 2010, resulting in a corresponding increase in our gross profit percentage of 3.8% to 31.9% during fiscal 2011 from 28.1% during fiscal 2010. The increase in the gross profit percentage was primarily due to lower per unit manufacturing costs during fiscal 2011 as compared to fiscal 2010.

### Operating Expenses

The following table summarizes operating expenses by segment for the fiscal 2011 and 2010:

| Fiscal Years Ended March 31, 2011 | Rotating Electrical | Under-the-Car Product Line | Eliminations | Consolidated |
| --- | ---: | ---: | ---: | ---: |
| General and administrative | $17,033,000 | $- | $- | $17,033,000 |
| Sales and marketing | 6,537,000 | - | - | 6,537,000 |
| Research and development | 1,549,000 | - | - | 1,549,000 |
| Acquisition costs | 879,000 | - | - | 879,000 |
| **Percent of net sales** |  |  |  |  |
| General and administrative | 10.6% | - | - | 10.6% |
| Sales and marketing | 4.1% | - | - | 4.1% |
| Research and development | 1.0% | - | - | 1.0% |
| Acquisition costs | 0.5% | - | - | 0.5% |
| **2010** |  |  |  |  |
| General and administrative | $15,389,000 | $- | $- | $15,389,000 |
| Sales and marketing | 6,019,000 | - | - | 6,019,000 |
| Research and development | 1,421,000 | - | - | 1,421,000 |
| Acquisition costs | 191,000 | - | - | 191,000 |
| **Percent of net sales** |  |  |  |  |
| General and administrative | 10.5% | - | - | 10.5% |
| Sales and marketing | 4.1% | - | - | 4.1% |
| Research and development | 1.0% | - | - | 1.0% |
| Acquisition costs | 0.1% | - | - | 0.1% |

*General and Administrative.* Our general and administrative expenses during fiscal 2011 were $17,033,000, which represents an increase of $1,644,000, or 10.7%, from general and administrative expenses during fiscal 2010 of $15,389,000. This increase in general and administrative expenses was primarily due to the following: (i) a loss of $162,000 recorded due to the changes in the fair value of foreign exchange contracts compared to a gain of $1,565,000 during fiscal 2010, (ii) $259,000 of increased general and administrative expenses at our offshore manufacturing facilities due primarily to increased professional services fees and other consulting fees, (iii) $217,000 of decreased amortization of the gain on the sale-leaseback transaction, and (iv) $152,000 of increased expenses which primarily related to travel in connection with our Fenco acquisition. These increases were partly offset by a decrease in bad debt expense as we recorded a provision for bad debt expense of $898,000 in the prior year compared to a recovery of $38,000 in the current year.

*Sales and Marketing*. Our sales and marketing expenses during fiscal 2011 increased $518,000, or 8.6%, to $6,537,000 from $6,019,000 during fiscal 2010. This increase was due primarily to (i) increased travel expense, (ii) the full year impact of the compensation for the employees as a result of our August 2009 acquisition, (iii) increased trade show expense, and (iv) increased advertising expense during fiscal 2011. These increases in sales and marketing expenses were partially offset by decreased catalog expenses during fiscal 2011.

*Research and Development.* Our research and development expenses increased by $128,000, or 9.0%, to $1,549,000 during fiscal 2011 from $1,421,000 during fiscal 2010. The increase in research and development expenses was due primarily to increased employee-related expenses and fees for consulting services during fiscal 2011.

*Acquisition costs*. Our acquisition costs were $879,000 during fiscal 2011 compared to $191,000 during fiscal 2010. Our fiscal 2011 acquisition costs were incurred in connection with our secured loans in the approximate aggregate amount of $4,863,000 to Fenco and the acquisition of Fenco on May 6, 2011.

*Gain on acquisition*. During fiscal 2010, we recorded a gain of $1,331,000 in connection with the acquisition of certain assets of Reliance as the estimated fair value of the net assets acquired exceeded the fair value of the consideration transferred.

### Interest Expense

*Interest Expense.* Our interest expense, net of interest income of $240,000, during fiscal 2011 was $5,355,000. This represents an increase of $645,000 over interest expense of $4,710,000 during fiscal 2010. This increase was primarily attributable to a higher balance of receivables being discounted under the receivable discount programs during fiscal 2011 compared to fiscal 2010. This increase in net interest expense was partly offset by a decrease in interest expense incurred on the lower average outstanding balances on our revolving loan and capital lease obligations during fiscal 2011.

### Provision for Income Taxes

*Income Tax*. In fiscal 2011, we recorded income tax expense of $7,809,000 compared to income tax expense of $5,282,000 in fiscal 2010, an effective rate of 39.0% and 35.4% for fiscal 2011 and 2010, respectively. The primary reason for the increase in the effective tax rate was because the benefit of lower statutory tax rates in foreign taxing jurisdictions was not as significant in fiscal 2011 when compared to the prior year. Offsetting the increase in the effective rate was an increase in the income apportioned to states with lower tax rates, which decreased our domestic effective rate. As a result of the decrease in the domestic effective tax rate, we revalued our deferred tax assets to reflect the lower value of deductions taken for book purposes, but not yet allowed for tax purposes. The change in the deferred tax rate resulted in a reduction of the net deferred tax assets of $558,000. This amount was charged to income tax expense in fiscal 2011.

### Liquidity and Capital Resources

Motorcar Parts of America, Inc. and its subsidiaries (the “Company” or “MPA”) remanufacture, produce, and distribute automobile parts for import and domestic cars, light trucks, heavy duty, agricultural and industrial applications. These replacement parts are sold for use on vehicles after initial vehicle purchase. These automotive parts are sold to automotive retail chain stores and warehouse distributors throughout the North America and to major automobile manufacturers.

### Overview

At March 31, 2012, we had negative working capital of $2,188,000, a ratio of current assets to current liabilities of 1:1, and cash of $32,617,000, compared to working capital of $1,395,000, a ratio of current assets to current liabilities of 1:1, and cash of $2,477,000 at March 31, 2011.

In accordance with our core accounting policies, we classify all of our core inventories as long-term assets and the portion of core liability related to the core inventory purchased and on the shelves of our customers, are recorded as long-term liabilities. These accounts are therefore excluded from the working capital and current ratio calculations. We do not recognize revenue or the related cost of sales from the sale of Remanufactured Cores; however, we do invoice and collect for the core value. These accounts receivable amounts are classified as short-term assets. In addition, upon the sale of a Remanufactured Core, a core liability is created to record the obligation to provide our customer with a credit upon the return of a like core by the customer. Since the return of a core is based on the sale of a remanufactured automobile part to an end user of our customer, the offset to this core liability generated by its return to us by our customer is usually followed by the sale of a replacement remanufactured auto part, and thus a portion of the core liability is continually outstanding and is recorded as long-term. The long-term core inventory as of March 31, 2012 was $194,406,000 compared to $80,558,000 at March 31, 2011. The long-term core liability as of March 31, 2012 was $113,702,000. There was no long-term core liability balance at March 31, 2011.

During fiscal 2012, we used cash generated by our rotating electrical segment, from our use of receivable discount programs with certain of our major customers, and our loans as our primary sources of liquidity. These sources were primarily used to repay the Old Parent Company Term Loan and pay for the capital expenditure obligations.

In January 2012, we replaced the Old Parent Company Credit Agreement by entering into the New Parent Company Financing Agreement with a syndicate of lenders, Cerberus Business Finance, LLC, as collateral agent, and PNC Bank, National Association, as administrative agent (the “New Parent Company Loans”). The New Parent Company Loans consist of: (i) term loans aggregating $75,000,000 (the “New Parent Company Term Loans”) and (ii) revolving loans of up to $20,000,000, subject to borrowing base restrictions and a $10,000,000 sublimit for letters of credit (the “New Parent Company Revolving Loans,”). The lenders hold a security interest in substantially all of the assets of our rotating electrical segment. As permitted by the New Parent Company Financing Agreement, we subsequently raised $15,000,000 of capital. The New Parent Company Financing Agreement permits us to invest up to $20,000,000 in Fenco.

The New Parent Company Term Loans require quarterly principal payments of $250,000 beginning on October 1, 2012 through July 1, 2013, and quarterly principal payments of $1,000,000 beginning on October 1, 2013. The New Parent Company Loans mature on January 17, 2017.

In April 2012, we entered into a Subscription Agreement and a Registration Rights Agreement to raise $15,004,000 in gross proceeds and net proceeds of $14,100,000 after expenses, through a private placement of our common stock. Pursuant to the terms of the Subscription Agreement, certain accredited investors purchased an aggregate of 1,936,000 shares of common stock in a private placement exempt from registration under the Securities Act in reliance upon Rule 506 of Regulation D, for a purchase price of $7.75 per share. We plan to use the proceeds to enhance the integration of our Fenco acquisition and for general corporate purposes.

In May 2012, we entered into the Second Amendment and borrowed an additional $10,000,000, for an aggregate of $85,000,000, in term loans. The Second Amendment, among other things, modified the interest rates per annum applicable to the Amended New Parent Company Term Loans. The Amended New Parent Company Term Loans will bear interest at rates equal to, at our option, either LIBOR plus 8.5% or a base rate plus 7.5%. The Amended New Parent Company Term Loans require quarterly principal payments of $250,000 beginning on October 1, 2012 and increase to $600,000 per quarter on April 1, 2013 and to $1,350,000 on October 1, 2013 until the final maturity date. Among other things, the Second Amendment provides for certain amended financial covenants, and requires that we maintain cash and cash equivalents of up to $10,000,000 in the aggregate until our obligations with respect to a significant supplier have ceased.

In connection with the Second Amendment, we also issued the Warrant to Cerberus Business Finance, LLC. Pursuant to the Warrant, Cerberus Business Finance, LLC, may purchase up to 100,000 shares of our common stock for an initial exercise price of $17.00 per share for a period of five years. The exercise price is subject to adjustments, among other things, for sales of common stock by us at a price below the exercise price. Further, if the exercise price of the Warrant is reduced, then the number of common stock shares that may be purchased upon the exercise of the Warrant will be increased so that the aggregate exercise price of the Warrant after the adjustment is the same as the aggregate exercise price prior the adjustment of $1,700,000. The fair value of the Warrant at the date of grant was estimated to be approximately $607,000 using the Monte Carlo simulation model. This amount will be recorded as a warrant liability and any subsequent changes in fair value of this Warrant will be recorded in current period earnings as a general and administrative expense. The following assumptions were used to calculate the fair value of the warrants: dividend yield of 0%; expected volatility of 56.29%; risk-free interest rate of 0.77%; subsequent financing probability of 75%; and an expected life of 5 years.

In August 2012, we entered into the Third Amendment which, among other things, (i) permitted us to enter into the strategic cooperation agreement with our Supplier, (ii) to make additional investments in Fenco in an aggregate amount outstanding not to exceed $20,000,000 at any time, (iii) added additional reporting requirements regarding financial reports of auditors and material notices under the strategic cooperation agreement described below, (iv) waived certain defaults arising as a result of our failure to comply with certain reporting requirements until September 17, 2012, and (v) removed the Second Amendment requirement that we maintain cash and cash equivalents of up to $10,000,000. In September 2012, we obtained an additional waiver to further extend the due date for reporting requirements to October 1, 2012.

In August 2012, Fenco entered into the Fenco Second Amendment with the Fenco lenders which, among other things, (i) extended the maturity date to October 6, 2014, (ii) amended the maximum amount of the revolving facility to (y) $55,000,000 for the period up to and including December 31, 2012 and (z) $50,000,000 for the period on or after January 1, 2013 through October 6, 2014, (iii) replaced the repayment schedule and the amounts for the term loan to require quarterly principal payments of $500,000 beginning on June 30, 2013 and increasing to $1,000,000 per quarter beginning December 31, 2013 through September 30, 2014, and the remaining unpaid principal amount is due on the final maturity date, (iv) waived certain defaults arising as a result of Fenco’s failure to comply with certain financial covenants and reporting requirements until September 17, 2012, (v) provided for certain mandatory prepayments of the term loan, and (vi) revised certain financial covenants regarding minimum EBITDA, minimum fixed charge coverage, unused borrowing availability under the Fenco revolving credit facility, and maximum capital expenditures. In September 2012, we obtained an additional waiver to further extend the due date for submitting audited financial statements to October 1, 2012.

In August 2012, we entered into the Agreement with the Supplier and FAPL. Under the terms of the Agreement, the Supplier agreed to provide the Fenco Credit Line in an aggregate principal amount not to exceed $22,000,000 of which $2,000,000 will only be available for accrued interest and other amounts payable. Payment for all purchases will be due and payable 120 days after the date of the bill of lading. Any amounts remaining unpaid following the due date will bear interest at a rate of 1% per month. The Fenco Credit Line will mature on July 31, 2017. Among other things, the Agreement requires that FAPL on an annual basis, purchase at least approximately $33,000,000 of new automotive parts and components. After July 1, 2014, the Supplier has the right to exercise the Receivable Sale Option, under which the Supplier may settle up to $8,000,000 of our outstanding Obligations in exchange, at our option, for (i) shares of our common stock valued at $7.75 per share, subject to certain adjustments, or (ii) cash in an amount equal to 135% of the amount of the outstanding Obligations sold to us. The Obligations under the Agreement are guaranteed by us and certain of our subsidiaries.

In connection with this Agreement, we also issued the Supplier Warrant to the Supplier to purchase up to 516,129 shares of our common stock for an initial exercise price of $7.75 per share exercisable at any time after two years from August 22, 2012 and on or prior to September 30, 2017. The exercise price is subject to adjustments, among other things, for sales of common stock by us at a price below the exercise price. Any outstanding Obligations settled by the Supplier will reduce the Fenco Credit Line. We are obligated to issue no more than an aggregate of 1,032,258 shares of our common stock in connection with the Receivable Sale Option and Supplier Warrant. The Obligations under this Agreement are subordinated to our obligations under the new parent company financing agreement. The preliminary fair value of the warrants at the date of grant was estimated to be approximately $1,018,000 using the Monte Carlo simulation model. This amount will be recorded as a warrant liability and any subsequent changes in fair value of this Warrant will be recorded in current period earnings as a general and administrative expense. The following assumptions were used to calculate the preliminary fair value of the warrants: dividend yield of 0%; expected volatility of 56.28%; risk-free interest rate of 0.71%; no likelihood of subsequent financing; and an expected life of 5.11 years.

We believe our cash and short-term investments on hand, use of receivable discount programs with certain of our major customers, amounts available under our credit agreements, amounts available under the strategic cooperation agreement, and the proceeds from the issuance of our common stock are sufficient to satisfy our expected future working capital needs, repayment of the current portion of our term loans, capital lease commitments, and capital expenditure obligations over the next twelve months. However, our ability to continue to meet such liquidity needs is subject to and will be affected by cash utilized in operations, including our under-the-car product line turnaround plan, continued general economic conditions, uncertain industry conditions, and the financial condition of our customers and suppliers.

### Cash Flows

Net cash used in operating activities was $38,488,000 during fiscal 2012 compared to net cash provided by operating activities of $10,735,000 during fiscal 2011. The rotating electrical segment provided cash from operations of $15,464,000 and $10,735,000 during fiscal 2012 and 2011, respectively. The significant changes in our operating activities for the rotating electrical segment were due primarily to an increase in accounts payable in connection with the inventory provided to Fenco, and an increase in our income tax liabilities in fiscal 2012 compared to prepaid income taxes in fiscal 2011. These increases were partly offset by the increased inventory levels in fiscal 2012 compared to fiscal 2011. Subsequent to our acquisition of Fenco on May 6, 2011, cash of $53,952,000 was used in operations of our under-the-car product line segment due primarily to (i) the operating loss incurred by this segment of $62,814,000, adjusted for non-cash charges and (ii) a decrease in accounts receivable of $9,630,000.

Net cash used in investing activities was $1,591,000 and $6,723,000 during fiscal 2012 and 2011, respectively. Our capital expenditures for our rotating electrical segment during fiscal 2012 and 2011 was $1,010,000 and $1,566,000, respectively, primarily related to the purchase of equipment for our manufacturing facilities. In addition, our prior year investing activities included the secured loan made to Fenco of $4,863,000 prior to the acquisition on May 6, 2011, and the payment of the purchase price holdback of $464,000 in connection with our acquisition of Automotive Importing Manufacturing, Inc.

Net cash provided by financing activities was $70,182,000 during fiscal 2012 compared to net cash used in financing activities of $2,790,000 during fiscal 2011. The rotating electrical segment provided cash from financing activities of $61,060,000 during fiscal 2012, compared to the net cash used in financing activities of $2,790,000 during fiscal 2011. The cash provided from financing activities was used primarily to finance Fenco, repay the Old Parent Company Term Loan. In addition, Fenco increased their credit facility by $10,000,000 which was used for working capital.

### Capital Resources

#### Debt

We have two outstanding credit agreements and a strategic cooperation agreement as described below.

#### Parent Company Credit Agreement

Our revolving credit and term loan agreement, as amended, (the “ Old Parent Company Credit Agreement”), with Union Bank, N.A. and Branch Banking & Trust Company, allowed us to borrow up to a total of $60,000,000 (the “Old Parent Company Credit Facility”). The Old Parent Company Credit Facility was comprised of (i) a revolving facility with a $7,000,000 letter of credit sub-facility and (ii) a term loan. We were able to borrow on a revolving basis up to an amount equal to $50,000,000 minus all outstanding letter of credit obligations (the “Old Parent Company Revolving Loan”). The term loan was in the principal amount of $10,000,000 (the “Old Parent Company Term Loan”).

The Old Parent Company Term Loan was scheduled to mature in October 2014 and required principal payments of $500,000 on a quarterly basis. The Old Parent Company Revolving Loan was scheduled to expire in October 2012 and provided us the option to request up to two one-year extensions.

In January 2012, we replaced the Old Parent Company Credit Agreement by entering into a new parent company financing agreement (the “New Parent Company Financing Agreement”) with a syndicate of lenders, Cerberus Business Finance, LLC, as collateral agent, and PNC Bank, National Association, as administrative agent (the “New Parent Company Loans”). The New Parent Company Loans consist of: (i) term loans aggregating $75,000,000 (the “New Parent Company Term Loans”) and (ii) revolving loans of up to $20,000,000, subject to borrowing base restrictions and a $10,000,000 sublimit for letters of credit (the “New Parent Company Revolving Loans,”). The lenders hold a security interest in substantially all of the assets of our rotating electrical segment. As permitted by the New Parent Company Financing Agreement, we subsequently raised $15,000,000 of capital. The New Parent Company Financing Agreement permits us to invest up to $20,000,000 in Fenco.

The New Parent Company Term Loans require quarterly principal payments of $250,000 beginning on October 1, 2012 through July 1, 2013, and quarterly principal payments of $1,000,000 beginning on October 1, 2013. The New Parent Company Loans mature on January 17, 2017.

The New Parent Company Loans bear interest, at the reference rate, plus an applicable margin, or at the Eurodollar rate, plus an applicable per annum margin, as selected by us. The applicable per annum margins for the New Revolving Loans are 2.5% for reference rate loans and 3.0% for Eurodollar rate loans. The applicable per annum margins for the New Term Loans are 7.0% for reference rate loans and 8.0% for Eurodollar rate loans. Additionally, we are subject to a 0.5% per annum fee on the unused portions of the New Revolving Loans.

The New Parent Company Financing Agreement, among other things, requires us to maintain certain financial covenants including a maximum senior leverage ratio, a minimum fixed charge coverage ratio, and minimum consolidated earnings before interest, income tax, depreciation and amortization (“EBITDA”). We were in compliance with all financial covenants under the New Parent Company Financing Agreement as of March 31, 2012.

A portion of the proceeds from the New Parent Company Term Loans was used to repay all amounts outstanding under the Old Parent Company Credit Facility, and the Old Parent Company Credit Agreement was terminated.

There was no outstanding balance on the parent company revolving loans at March 31, 2012 or at March 31, 2011. As of March 31, 2012, $16,233,000 was available under the New Parent Company Revolving Loans. We had reserved $626,000 for standby letters of credit for workers’ compensation insurance and $2,338,000 for commercial letters of credit as of March 31, 2012 of the New Parent Company Revolving Loans.

In May 2012, we entered into the Second Amendment and borrowed an additional $10,000,000, for an aggregate of $85,000,000, in term loans. The Second Amendment, among other things, modified the interest rates per annum applicable to the Amended New Parent Company Term Loans. The Amended New Parent Company Term Loans will bear interest at rates equal to, at our option, either LIBOR plus 8.5% or a base rate plus 7.5%. The Amended New Parent Company Term Loans require quarterly principal payments of $250,000 beginning on October 1, 2012 and increase to $600,000 per quarter on April 1, 2013 and to $1,350,000 on October 1, 2013 until the final maturity date. Among other things, the Second Amendment provides for certain amended financial covenants, and requires that we maintain cash and cash equivalents of up to $10,000,000 in the aggregate until our obligations with respect to a significant supplier have ceased.

In August 2012, we entered into the Third Amendment which, among other things, (i) permitted us to enter into the strategic cooperation agreement with our Supplier, (ii) to make additional investments in Fenco, (iii) added additional reporting requirements regarding financial reports and material notices under the strategic cooperation agreement described below, (iv) waived certain defaults arising as a result of our failure to comply with certain reporting requirements until September 17, 2012, and (v) removed the Second Amendment requirement that we maintain cash and cash equivalents of up to $10,000,000. In September 2012, we obtained an additional waiver to further extend the due date for reporting requirements to October 1, 2012.

#### Fenco Credit Agreement

In connection with the acquisition of Fenco, our now wholly-owned subsidiaries, FAPL and Introcan, as borrowers (the “Fenco Borrowers”), entered into an amended and restated credit agreement, dated May 6, 2011 (the “Fenco Credit Agreement”) with Manufacturers and Traders Trust Company as lead arranger, M&T Bank as lender and administrative agent and the other lenders from time to time party thereto (the “Fenco Lenders”). Pursuant to the Fenco Credit Agreement, the Fenco Lenders have made available to the Fenco Borrowers a revolving credit facility in the maximum principal amount of $50,000,000 (the “Fenco Revolving Facility”) and a term loan in the principal amount of $10,000,000 (the “Fenco Term Loan”). The availability of the Fenco Revolving Facility is subject to a borrowing base calculation consisting of eligible accounts receivable and eligible inventory. At March 31, 2012, approximately $890,000 was available under the Fenco Revolving Facility.

The Fenco Revolving Facility and the Fenco Term Loan mature on October 6, 2012, but may be accelerated upon the occurrence of an insolvency event or event of default under the Fenco Credit Agreement. On May 11, 2012, the maturity date of the Fenco Revolving Facility and the Fenco Term Loan was extended to May 13, 2013.

As of March 31, 2012, $48,884,000 of the Fenco Revolving Facility was outstanding, $712,000 was reserved for standby commercial letters of credit and $372,000 was reserved for certain expenses. In addition, $1,000,000 of this Fenco Revolving Facility was reserved for Canadian operations use. The Fenco Lenders hold a security interest in substantially all of the assets of the under-the-car product line segment.

The Fenco Borrowers may receive advances under the Fenco Revolving Facility by any one or more of the following options: (i) swingline advances in Canadian or US dollars; (ii) Canadian dollar prime-based loans; (iii) US dollar base rate loans; (iv) LIBOR loans; or (v) letters of credits.

The Fenco Credit Agreement, among other things, requires the Fenco Borrowers to maintain certain financial covenants. As of March 31, 2012, the Fenco Borrowers were in compliance with all financial covenants under the Fenco Credit Agreement.

The Fenco Term Loan bears interest at the LIBO rate plus an applicable margin. Outstanding advances under the Revolving Facility bear interest as follows:

(i) in respect of swingline advances in Canadian dollars and Canadian dollar prime-based loans, at the reference rate announced by the Royal Bank of Canada plus an applicable margin;

(ii) in respect of swingline advances in US dollars and US dollar base rate loans, at a base rate (which shall be equal to the highest of (x) M&T Bank’s prime rate, (y) the Federal Funds Rate plus Ѕ of 1%, or (z) the one month LIBO rate) plus an applicable margin;

(iii) in respect of LIBOR loans, at the LIBO rate plus an applicable margin.

In August 2012, Fenco entered into a second amendment to the Fenco credit agreement with the Fenco lenders which, among other things, (i) extended the maturity date to October 6, 2014, (ii) amended the maximum amount of the revolving facility to (y) $55,000,000 for the period up to and including December 31, 2012 and (z) $50,000,000 for the period on or after January 1, 2013 through October 6, 2014, (iii) replaced the repayment schedule and the amounts for the term loan to require quarterly principal payments of $500,000 beginning on June 30, 2013 and increasing to $1,000,000 per quarter beginning December 31, 2013 through September 30, 2014, and the remaining unpaid principal amount is due on the final maturity date, (iv) waived certain defaults arising as a result of Fenco’s failure to comply with certain financial covenants and reporting requirements until September 17, 2012, (v) provided for certain mandatory prepayments of the term loan, and (vi) revised certain financial covenants regarding minimum EBITDA, minimum fixed charge coverage, unused borrowing availability under the Fenco revolving credit facility, and maximum capital expenditures. In September 2012, we obtained an additional waiver to further extend the due date for submitting audited financial statements to October 1, 2012.

#### Strategic Cooperation Agreement

In August 2012, we entered into the Agreement with the Supplier and FAPL. Under the terms of the Agreement, the Supplier agreed to provide the Fenco Credit Line in an aggregate amount not to exceed $22,000,000 of which $2,000,000 will only be available for accrued interest and other amounts payable. Payment for all purchases will be due and payable 120 days after the date of the bill of lading. Any amounts remaining unpaid following the due date will bear interest at a rate of 1% per month. The Fenco Credit Line will mature on July 31, 2017. Among other things, the Agreement requires that FAPL on an annual basis, purchase at least approximately $33,000,000 of new automotive parts and components. After July 1, 2014, the Supplier has the right to exercise the Receivable Sale Option under which the Supplier may settle up to $8,000,000 of our outstanding Obligations in exchange, at our option, for (i) shares of our common stock valued at $7.75 per share, subject to certain adjustments, or (ii) cash in an amount equal to 135% of the amount of the outstanding Obligations sold to us. The Obligations under the Agreement are guaranteed by us and certain of our subsidiaries.

Our ability to comply in future periods with the financial covenants in the New Parent Company Loans and Fenco Credit Agreement, will depend on our ongoing financial and operating performance, which, in turn, will be subject to economic conditions and to financial, business and other factors, many of which are beyond our control and will be substantially dependent on the selling prices and demand for our products, customer demands for marketing allowances and other concessions, raw material costs, and our ability to successfully implement our overall business strategy, including the integration of our Fenco acquisition. If a violation of any of the covenants occurs in the future, we would attempt to obtain a waiver or an amendment from our lenders or the Fenco Lenders, as applicable. No assurance can be given that we would be successful in this regard.

#### Investment in Fenco

As of August 31, 2012, we had invested $4,946,000 of equity, $49,141,000 of debt into Fenco, which is subordinated to the Fenco Revolving Facility.

#### Receivable Discount Programs

We use receivable discount programs with certain customers and their respective banks. Under these programs, we have options to sell those customers’ receivables to those banks at a discount to be agreed upon at the time the receivables are sold. These discount arrangements allow us to accelerate collection of customers’ receivables. While these arrangements have reduced our working capital needs, there can be no assurance that these programs will continue in the future. Interest expense resulting from these programs would increase if interest rates rise, if utilization of these discounting arrangements expands or if the discount period is extended to reflect more favorable payment terms to customers.

The following is a summary of the receivable discount programs:

|  | Years Ended March 31, 2012 | 2011 |
| --- | ---: | ---: |
| Receivables discounted | $280,278,000 | $134,867,000 |
| Weighted average days | 313 | 330 |
| Weighted average discount rate | 2.9% | 3.9% |
| Amount of discount as interest expense | $7,072,000 | $4,768,000 |

#### Off-Balance Sheet Arrangements

At March 31, 2012, we had no off-balance sheet financing or other arrangements with unconsolidated entities or financial partnerships (such as entities often referred to as structured finance or special purpose entities) established for purposes of facilitating off-balance sheet financing or other debt arrangements or for other contractually narrow or limited purposes.

#### Multi-year Customer Agreements

We have or are renegotiating long-term agreements with many of our major customers. Under these agreements, which in most cases have initial terms of at least four years, we are designated as the exclusive or primary supplier for specified categories of remanufactured alternators and starters. In consideration for our designation as a customer’s exclusive or primary supplier, we typically provide the customer with a package of marketing incentives. These incentives differ from contract to contract and can include (i) the issuance of a specified amount of credits against receivables in accordance with a schedule set forth in the relevant contract, (ii) support for a particular customer’s research or marketing efforts provided on a scheduled basis, (iii) discounts granted in connection with each individual shipment of product, and (iv) other marketing, research, store expansion or product development support. These contracts typically require that we meet ongoing standards related to fulfillment, price, and quality. Our contracts with major customers expire at various dates through March 2019.

The longer-term agreements both reflect and strengthen our customer relationships and business base. However, they also result in a continuing concentration of our revenue sources among a few key customers and require a significant increase in our use of working capital to build inventory and increase production. This increased production causes significant increases in our inventories, accounts payable and employee base, and customer demands that we purchase their Remanufactured Core inventory can be a significant strain on our available capital. In addition, the marketing and other allowances that we typically grant to our customers in connection with these new or expanded relationships adversely impact the near-term revenues and associated cash flows from these arrangements. However, we believe this incremental business will improve our overall liquidity and cash flow from operations over time.

### Share Repurchase Program

In March 2010, our Board of Directors authorized a share repurchase program of up to $5,000,000 of our outstanding common stock from time to time in the open market and in private transactions at prices deemed appropriate by management. There is no expiration date governing the period over which we can repurchase shares under this program. During July 2010, we repurchased 14,400 shares at a total cost of approximately $89,000. Our credit agreements currently prohibit such repurchases.

### Capital Expenditures and Commitments

Our capital expenditures were $1,554,000 during fiscal 2012. A significant portion of these expenditures relate to the purchase of equipment for our manufacturing facilities and improvements to our California facility. We expect our fiscal 2013 capital expenditure for our current operations to be in the range of approximately $3,000,000 to $4,000,000. We expect to use our working capital and incur additional capital lease obligations to finance these capital expenditures.

#### Contractual Obligations

The following summarizes our contractual obligations and other commitments as of March 31, 2012, and the effect such obligations could have on our cash flow in future periods:

| Contractual Obligations | Payments Due by Period Total | Less than 1 year | 2 to 3 years | 4 to 5 years | More than 5 years |
| --- | ---: | ---: | ---: | ---: | ---: |
| Capital Lease Obligations (1) | $689,000 | $423,000 | $266,000 | $- | $- |
| Operating Lease Obligations (2) | 25,750,000 | 5,262,000 | 8,780,000 | 4,063,000 | 7,645,000 |
| Revolving Loan | 48,884,000 | - | 48,884,000 | - | - |
| Term Loan (3) | 95,000,000 | 500,000 | 19,300,000 | 75,200,000 | - |
| Unrecognized Tax Benefits (4) | - | - | - | - | - |
| Other Long-Term Obligations (5) | 37,616,000 | 14,516,000 | 14,490,000 | 5,735,000 | 2,875,000 |
| Total | $207,939,000 | $20,701,000 | $91,720,000 | $84,998,000 | $10,520,000 |

(1) Capital Lease Obligations represent amounts due under capital leases for various types of machinery and computer equipment.

(2) Operating Lease Obligations represent amounts due for rent under our leases for office and warehouse facilities in North America and Asia and for our Company automobile.

(3) Includes $10,000,000 in additional term loans borrowed pursuant to our Second Amendment entered into in May 2012.

(4) We are unable to reliably estimate the timing of future payments related to uncertain tax positions; therefore, $3,613,000 of income taxes payable has been excluded from the table above. However, future tax payment accruals related to uncertain tax positions are included in our balance sheets, reduced by the associated federal deduction for state taxes.

(5) Other Long-Term Obligations represent commitments we have with certain customers to provide marketing allowances in consideration for long-term agreements to provide products over a defined period. We are not obligated to provide these marketing allowances should our business relationships end with these customers.

## Market risk

As filed, 2,642 characters.

Our primary market risk relates to changes in interest rates and foreign currency exchange rates. We do not enter into derivatives or other financial instruments for trading or speculative purposes. As our overseas operations expand, our exposure to the risks associated with foreign currency fluctuations will continue to increase.

#### Interest rate risk

We are exposed to changes in interest rates primarily as a result of our borrowing and receivable discount programs, which have interest costs that vary with interest rate movements. Our credit facilities bear interest at variable base rates, plus an applicable margin. At March 31, 2012, our consolidated debt obligations totaled $133,884,000. If interest rates were to increase 1%, our net annual interest expense would have increased by approximately $1,339,000. In addition, for each $10,000,000 of accounts receivable we discount over a period of 180 days, a 1% increase in interest rates would decrease our operating results by $50,000.

#### Foreign currency risk

We are exposed to foreign currency exchange risk inherent in our anticipated purchases and expenses denominated in currencies other than the U.S. dollar. We transact business in the following foreign currencies; Mexican pesos, Malaysian ringit, Singapore dollar, Chinese yuan, and the Canadian dollar. Our primary currency risk results from fluctuations in the value of the Mexican peso. To mitigate this risk, we enter into forward foreign currency exchange contracts to exchange U.S. dollars for Mexican pesos. The extent to which we use forward foreign currency exchange contracts is periodically reviewed in light of our estimate of market conditions and the terms and length of anticipated requirements. The use of derivative financial instruments allows us to reduce our exposure to the risk that the eventual net cash outflow resulting from funding the expenses of the foreign operations will be materially affected by changes in exchange rates. These contracts generally expire in a year or less. Any changes in the fair values of our forward foreign currency exchange contracts are reflected in current period earnings. Based upon our forward foreign currency exchange contracts related to these currencies, an increase of 10% in exchange rates at March 31, 2012 would have increased our general and administrative expenses by approximately $1,031,000. During fiscal 2012 and 2011, a loss of $476,000 and $162,000, respectively, were recorded in general and administrative expenses due to the change in the value of the forward foreign currency exchange contracts subsequent to entering into the contracts.

## Controls and procedures

As filed, 8,119 characters.

### Evaluation of Disclosure Controls and Procedures

We have established disclosure controls and procedures to ensure that the information required to be disclosed by the Company in the reports that it files or submits under the Securities Exchange Act of 1934 is recorded, processed, summarized and reported within the time periods specified in the SEC rules and forms and that such information is accumulated and made known to the officers who certify the Company’s financial reports and to other members of senior management and the Board of Directors as appropriate to allow timely decisions regarding required disclosures.

Under the supervision and with the participation of management, including our Chief Executive Officer, Chief Financial Officer, and Chief Accounting Officer, we have conducted an evaluation of the effectiveness of our disclosure controls and procedures as defined in Exchange Act Rules 13a-15(e) and 15d-15(e). Based on this evaluation, our Chief Executive Officer, Chief Financial Officer, and Chief Accounting Officer concluded that the MPA’s disclosure controls and procedures were effective as of March 31, 2012.

### Inherent Limitations Over Internal Controls

Our internal control over financial reporting is designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. Because of its inherent limitations, internal control may not prevent misstatements. Further, an evaluation of the effectiveness of internal control may not detect misstatements.

### Management’s Report on Internal Control Over Financial Reporting

The Company’s management is responsible for establishing and maintaining adequate internal control over financial reporting as defined in Exchange Act Rules 13a-15(f) and 15d-15(f). Under the supervision and with the participation of management, including our Chief Executive Officer, Chief Financial Officer, and Chief Accounting Officer, we conducted an evaluation of the effectiveness of our internal control over financial reporting based on the criteria established in the Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission. Based on this evaluation, management concluded that the Company’s internal control over financial reporting was ineffective as of March 31, 2012.

On May 6, 2011, MPA acquired Fenco, a privately-owned Toronto-based manufacturer, remanufacturer and distributor of new and remanufactured aftermarket auto parts. For additional information regarding the acquisition, refer to Note 3 in the Notes to Consolidated Financial Statements and, Management’s Discussion and Analysis of Financial Condition and Results of Operations, included in Item 7 of this Annual Report. As permitted by SEC guidance, which allows for a one-year integration period, management has excluded the operations related to Fenco from its assessment of MPA internal control over financial reporting as of March 31, 2012.

Since the acquisition of Fenco we have been unable to timely file our Quarterly Reports pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934 for the second and third quarters of our fiscal 2012. As a result, we concluded that our disclosure controls and procedures were not effective because of the existence of a material weakness in our internal control over financial statement close process at Fenco. Specifically, systems required to segregate and account for transactions accurately were inadequate. Also, the financial policies and procedures at Fenco did not provide for effective oversight and review of the reconciliation of accounts at month or quarter ends. Moreover, there is a lack of sufficient personnel with appropriate knowledge, experience and training in U.S. GAAP and lack of sufficient analysis, reconciliations and documentation of the application of U.S. GAAP to transactions. As a result, Fenco was unable to complete the financial closing process on a timely and accurate basis.

The effectiveness of our internal control over financial reporting as of March 31, 2012 has been audited by the Company’s independent registered public accounting firm, Ernst & Young LLP. Their assessment is included in the accompanying Report of Independent Registered Public Accounting Firm on internal control over financial reporting.

### Changes in Internal Control Over Financial Reporting

There were no changes in MPA’s internal control over financial reporting during the fourth quarter ended March 31, 2012 that have materially affected, or are reasonably likely to materially affect, MPA’s internal control over financial reporting.

On May 6, 2011, MPA acquired Fenco, a privately-owned Toronto-based manufacturer, remanufacturer and distributor of new and remanufactured aftermarket auto parts. For additional information regarding the acquisition, refer to Note 3 in the Notes to Consolidated Financial Statements and, Management’s Discussion and Analysis of Financial Condition and Results of Operations, included in Item 7 of this Annual Report. As permitted by SEC guidance, which allows for a one-year integration period, management has excluded the operations related to Fenco from its assessment of MPA internal control over financial reporting as of December 31, 2011.

Since the acquisition of Fenco we have been unable to timely file our Quarterly Reports pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934 for the second and third quarters of our fiscal 2012. As a result, management has concluded that our disclosure controls and procedures were not effective because of the existence of a material weakness in our internal control over financial reporting at Fenco. Specifically, systems required to segregate and account for core and other transactions accurately were inadequate. Also, the financial policies and procedures applied at Fenco did not provide for effective oversight and review of the reconciliation of accounts at month or quarter ends. In addition, the overall accounting skill set was inadequate to perform key accounting controls. As a result, Fenco was unable to complete the financial closing process on a timely and accurate basis.

As a result of the material weakness, we have commenced a review of the internal controls over financial reporting at Fenco and began putting in place appropriate oversight and controls. From our fiscal 2012 second quarter filing, we integrated the core receiving and return transactions into our financial reporting process and implemented additional core tracking procedures. We have also added additional personnel to review core and other transactions.

In preparing our fiscal 2012 third quarter filing, direct oversight by MPA management of Fenco accounting personnel has substantially increased. Additional key personnel were added, which has improved the overall accounting skill set. However, additional accounting resources may be required to support the consistent performance of accounting internal controls. In preparing our fiscal 2012 annual filing, we have improved controls over sales, purchases, receiving and shipping transactions to ensure their inclusion in the proper reporting period.

Integration activities, including documenting and assessing Fenco internal controls over financial reporting, continue in process. Additionally, the Company has ongoing initiatives to standardize the Fenco financial, information technology, and operating systems. Fenco business applications are scheduled for conversion to the MPA business applications from June 2012 through December 2012. The initial annual assessment of internal controls over financial reporting for the acquired business will be conducted over the course of the fiscal year 2013.

As a result of our continuing review of Fenco operations and finances, we did not file and do not expect to file our Quarterly Reports on Form 10-Q for the quarterly periods ended June 30, 2012 and September 30, 2012 in a timely manner.

Filed Sep 28, 2012.
Source: SEC EDGAR, the filing index for accession 0001140361-12-041905. Last ingested by Listed: Nov 14, 2026, 23:32 ET. No prices; not investment advice.
