# Gentherm Inc: Form 10-Q for the period ended Jun 30, 2009

- Company: [Gentherm Inc](/companies/thrm.md) (CIK 903129)
- Form: 10-Q
- Filed: 2009-08-10
- Accepted by EDGAR: Aug 10, 2009, 19:38 ET
- Period: 2009-06-30
- Accession: 0001193125-09-170532
- Inline XBRL: no
- Main document: https://www.sec.gov/Archives/edgar/data/903129/000119312509170532/d10q.htm
- All documents and exhibits: https://www.sec.gov/Archives/edgar/data/903129/000119312509170532/

## Management's discussion and analysis

As filed, 26,371 characters.

### General

Amerigon Incorporated (“we,” the “Company” or the “registrant”) designs, develops and markets products based on our advanced, proprietary, efficient thermoelectric device (“TED”) technologies for a wide range of global markets and heating and cooling applications. Our current principal product is our proprietary Climate Control Seat™ (“CCS™” or “CCS”) which we sell to automobile and truck original equipment manufacturers or their tier one suppliers. The CCS provides year-round comfort to automotive seat occupants by producing both active heating and cooling. As of June 2009, we have shipped more than 4.7 million units of our CCS product to customers since 2000. Our CCS product is currently offered as an optional feature on 41 automobile models produced by Ford Motor Company, General Motors Corporation, Toyota Motor Corporation, Nissan Motors, Honda Motor Company, Hyundai Corporation and Kia Motors. Tata Motors, Ltd. features CCS on its Jaguar and Land Rover luxury brands which it acquired from Ford Motor Company in 2008.

Since the initial introduction of CCS, we have introduced new designs that incorporated improvements in electrical efficiency, size, weight, and noise and are more versatile. These include our Micro Thermal Module™ (“MTM™” or “MTM”) technology and our CCS II configuration. Further improvements in engineering design are currently in development and are expected to be introduced on future vehicle models.

In 2008, we launched a heated and ventilated only variant of the CCS. This product works in a similar fashion to our CCS, only there is no active cooling capability and no TED. In the cooling mode, the vent only system will use the ambient cabin air to provide a degree of cooling comfort to the seat occupant. In the heating mode, the vent only system will be supplemented with more traditional resistive heating elements. This system has a lower price and is targeted to certain lower cost vehicle models and certain geographical markets.

In 2008, we entered into development agreement to develop a suite of heated and cooled bedding products with Sealy Corporation, the largest bedding manufacturer in the world, using Amerigon’s advanced TED technology.

### Results of Operations

#### Second Quarter 2009 Compared with Second Quarter 2008

*Product Revenues*. Product revenues for the three months ended June 30, 2009 (“Second Quarter 2009”), were $10,715,000 compared with product revenues of $16,796,000 for the three months ended June 30, 2008 (“Second Quarter 2008”), a decrease of $6,081,000, or 36%. Lower sales resulting from lower volumes on existing programs were partially offset by higher sales from new model introductions. Unit shipments were 154,000 for the Second Quarter 2009 compared with unit shipments of 253,000 in the Second Quarter 2008, a decrease of 99,000 units or 39%. The lower product revenues and unit volumes on existing programs were due to a significant decline in the overall automotive market. Automotive production and sales volumes, impacted by slowing worldwide economic activity and decreasing availability of consumer credit, were significantly lower during the Second Quarter 2009 as compared to the Second Quarter 2008. In North America, one of our most important markets, the Seasonally Adjusted Annual Rate (“SAAR”) for vehicle sales, was 9.6 million, down 32%, from 14.1 million during the Second Quarter 2008. Vehicle production levels have been reduced even further as OEM’s have cut production in order to reduce new vehicle inventory levels. During the Second Quarter 2009, production of light vehicles in North America decreased by 51% to 1.7 million from 3.5 million during the Second Quarter 2008. New vehicles equipped with CCS and launched since the end of the Second Quarter 2008 included the Lincoln MKT, Ford F150 Pickup, Chevrolet Suburban, Chevrolet Tahoe, Chevrolet Avalanche, GMC Yukon, GMC Yukon XL, GMC Yukon Denali, GMC Sierra Pickup, Jaguar XK, Toyota Crown Majesta, and the Infiniti G Convertible. One program, the Nissan Maxima, launched during 2008 had higher revenue in 2009 due to the impact of full quarter shipments.

*Cost of Sales*. Cost of sales decreased to $8,184,000 in the Second Quarter 2009 from $11,517,000 in the Second Quarter 2008. This decrease of $3,333,000, or 29%, is attributable to lower sales volumes offset partially by a lower gross profit percentage. The gross profit percentage during the Second Quarter 2009 was 24% and was 31% during the Second Quarter 2008. This decrease is primarily attributable to higher raw material costs during the Second Quarter 2009 as compared to the Second Quarter 2008, an unfavorable change in the mix of products sold which favored programs having a lower gross margin percentage during the Second Quarter 2009 compared with the Second Quarter 2008 and lower coverage of fixed cost at the lower volume levels. TED’s, which represent the key component of the CCS system, contain the metal Tellurium (“Te”). Higher costs for Te represent the most significant portion of our higher raw material cost. During the early months of 2008, the market for Te experienced a significant increase. The average price of a kilogram of Te in 2007 was approximately $100 and increased to a peak of $286 in April 2008. Since that time, the average market price has decreased to a current average of $160 per kilogram during June 2009. We do not purchase Te directly, but have agreed to price increases from our TED suppliers as a result of the increase in their Te costs. Existing Te supply contracts and on-hand inventory resulted in a delay in the impact of higher Te market prices to us until the Third Quarter 2008. Although the market for Te has moderated, we expect that the lower levels will not result in reduced costs to Amerigon because of our supplier’s need to work off inventory until late in the Third Quarter 2009.

*Net Research and Development Expenses*. Net research and development expenses increased to $1,574,000 in the Second Quarter 2009 from $1,497,000 in the Second Quarter 2008. This $77,000, or 5%, increase was due to increased research activities associated with our advanced TED program partially offset by lower costs to support a smaller number of new vehicle programs to be launched during 2009 as compared to 2008. The increase in research and development expenses in our advanced TED program is associated with a recent breakthrough in our TED material program. Much of our higher research and development expenses are focused on further advancing and commercializing new TED material. Our research and development reimbursements have decreased due to lower partner supported research projects during the Second Quarter 2009.

We classify development and prototype costs and related reimbursements as research and development. This is consistent with accounting standards applied in the automotive industry. Depreciation costs for tooling are included in cost of sales.

*Selling, General and Administrative Expenses*. Selling, general and administrative expenses increased to $2,166,000 in the Second Quarter 2009 compared with $2,032,000 in the Second Quarter 2008. This $134,000, or 7%, increase is primarily attributable to higher stock option compensation expense and higher legal fees during the Second Quarter 2009 as compared with the Second Quarter 2008. The higher stock option compensation relates to options issued to employees on two separate grant dates; 485,000 option shares on July 23, 2008 and 724,000 option shares on March 11, 2009. Compensation expense related to these option grants is being recorded over the three year vesting period associated with terms of the option agreements and totaled $198,000 for the Second Quarter 2009 and was partially offset by a decrease in stock option expense associated with stock option grants with vesting periods which ended subsequent to the Second Quarter 2008 and prior to the Second Quarter 2009. Our higher legal fees are associated with legal support activities surrounding the 2009 Proxy filing and legal review activities.

*Interest Income*. We had interest income of $4,000 for the Second Quarter 2009 compared with $218,000 for the Second Quarter 2008. The decrease of $214,000, or 98%, resulted from lower average yields on our cash equivalents and short-term investments.

*Income Tax Expense.* We recorded an income tax benefit of $291,000 during the Second Quarter 2009. This reflected an estimated effective tax rate for the year of approximately 30% on our expected full year pretax results for 2009. During the Second Quarter 2008, we recorded an income tax expense totaling $749,000 reflecting a 37% effective tax rate on pretax income of $2,003,000.

#### First Half 2009 Compared with First Half 2008

*Product Revenues*. Product revenues for the six months ended June 30, 2009 (“First Half 2009”), were $20,885,000 compared with product revenues of $34,156,000 for the six months ended June 30, 2008 (“First Half 2008”), a decrease of $13,271,000, or 39%. Lower sales resulting from lower volumes on existing programs were partially offset by higher sales from new model introductions. Unit shipments were 297,000 units for the First Half 2009 compared with unit shipments of 506,000 in the First Half 2008, a decrease of 209,000 units or 41%. The lower product revenues and unit volumes on existing programs were due to a significant decline in the overall automotive market. Automotive production and sales volumes, impacted by slowing worldwide economic activity and decreasing availability of consumer credit, were significantly lower during the First Half 2009 as compared to the First Half 2008. In North America, one of our most important markets, the SAAR for vehicle sales was 9.6 million during the Second Quarter 2009, down 32%, from 14.1 million during the Second Quarter 2008. Additionally, the North American SAAR for the First Quarter 2009 was 9.5 million, down 38%, from 15.2 million during the First Quarter 2008. Vehicle production levels have been reduced even further as OEM’s have cut production in order to reduce new vehicle inventory levels. During the First Half 2009 production of light vehicles in North America decreased by 50% to 3.5 million from 7.0 million during the First Half 2008. New vehicles equipped with CCS and launched since the end of the Second Quarter 2008 included the Nissan Maxima, Lincoln MKT, Ford F150 Pickup, Chevrolet Suburban, Chevrolet Tahoe, Chevrolet Avalanche, GMC Yukon, GMC Yukon XL, GMC Yukon Denali, GMC Sierra Pickup, Jaguar XK, Toyota Crown Majesta, Infiniti G Convertible, Nissan 350Z Convertible.

*Cost of Sales*. Cost of sales decreased to $15,936,000 in the First Half 2009 from $23,318,000 in the First Half 2008. This decrease of $7,382,000, or 32%, is attributable to lower sales volumes offset partially by a lower gross profit percentage. The gross profit percentage during the First Half 2009 was 24% and was 32% during the First Half 2008. This decrease is primarily attributable to higher raw material costs during the First Half 2009 as compared to the First Half 2008, an unfavorable change in the mix of products sold which favored programs having a lower gross margin percentage during the First Half 2009 compared with the First Half 2008 and lower coverage of fixed cost at the lower volume levels. TED’s, which represent the key component of the CCS system, contain the metal Tellurium (“Te”). Higher costs for Te represent the most significant portion of our higher raw material cost. During the early months of 2008, the market for Te experienced a significant increase. The average price of a kilogram of Te in 2007 was approximately $100 and increased to a peak of $286 in April 2008. Since that time, the average market price has decreased to a current average of $160 per kilogram during June 2009. We do not purchase Te directly, but have agreed to price increases from our TED suppliers as a result of the increase in their Te costs. Existing Te supply contracts and on-hand inventory resulted in a delay in the impact of higher Te market prices to us until the Third Quarter 2008. Although the market for Te has moderated, we expect that the lower levels will not result in reduced costs to Amerigon because of our supplier’s need to work off inventory until late in the Third Quarter 2009.

*Net Research and Development Expenses*. Net research and development expenses increased to $3,320,000 in the First Half 2009 from $3,087,000 in the First Half 2008. This $233,000, or 8%, increase was due to increased research activities associated with our advanced TED program partially offset by lower costs to support a smaller number of new vehicle programs to be launched during 2009 as compared to 2008. The increase in research and development expenses in our advanced TED program is associated with a recent breakthrough in our TED material program. Much of our higher research and development expenses are focused on further advancing and commercializing new TED material. Our research and development reimbursements have decreased due to lower partner supported research projects during the First Half 2009.

*Selling, General and Administrative Expenses*. Selling, general and administrative expenses increased to $4,315,000 in the First Half 2009 compared with $4,159,000 in the First Half 2008. This $156,000, or 4%, increase is primarily attributable to higher stock option compensation expense and higher legal fees during the First Half 2009 as compared with the First Half 2008. The higher stock option compensation relates to options issued to employees on two separate grant dates; 485,000 option shares on July 23, 2008 and 724,000 option shares on March 11, 2009. Compensation expense related to these option grants is being recorded over the three year vesting period associated with terms of the option agreements and totaled $344,000 for the First Half 2009 and was partially offset by a decrease in stock option expense associated with stock option grants with vesting periods which ended subsequent to the First Half 2008 and prior to the First Half 2009. Our higher legal fees are associated with legal support activities surrounding the adoption of a Shareholder Rights Plan, the 2009 Proxy filing other legal review activities.

*Interest Income*. We had interest income of $26,000 for the First Half 2009 compared with $515,000 for the First Half 2008. The decrease of $489,000, or 95%, resulted from lower average yields on our cash equivalents and short-term investments.

*Income Tax Expense.* We recorded an income tax benefit of $786,000 during the First Half 2009. This reflected an estimated effective tax rate for the year of approximately 30% on our expected full year pretax results for 2009. During the First Half 2008, we recorded an income tax expense totaling $1,569,000 reflecting a 37% effective tax rate on pretax income of $4,194,000.

### Liquidity and Capital Resources

We had cash and cash equivalents of $26,187,000 at June 30, 2009 and $25,303,000 at December 31, 2008. We manage our cash, cash equivalents and short-term investments to fund operating requirements.

We believe that our current working capital of $29,502,000 and our $10.0 million revolving line of credit will be adequate to fund our current business needs.

On August 6, 2009 we amended our Revolving Credit Line with Comerica Bank. The amendment decreased the amount available to $10,000,000 from $20,000,000. Under the terms of the amendment, a Borrowing Base limiting the loans available under the Revolving Credit Line is effective for any outstanding loans. The Borrowing Base is equal to 85% of Eligible Domestic accounts receivable (as defined by the agreement), plus the lesser of 60% of Eligible Foreign accounts receivable (as defined by the agreement) or $3,000,000, plus 50% of Eligible Inventory (as defined by the agreement), plus 70% of the market value of Eligible Securities (as defined by the agreement). Prime-based loans and Eurodollar-based loans were eliminated and replaced by Base Rate Advances. Base Rate Advances bear interest at a variable rate plus an applicable margin as outline in the amendment. The applicable margin is 3.0%. The amendment also changed requirements to maintain certain financial ratios including the elimination of the maximum ratio of funded debt to EBITDA, as defined by the credit agreement, and the inclusion of a minimum rolling four quarter EBITDA level. All other terms of the Revolving Credit Line were substantially unaffected by the amendment. As of June 30, 2009, we had no outstanding loans under the Revolving Credit Line and one letter of credit was outstanding totaling $165,000. Total availability under the line as of August 6, 2009, as amended, was $9,835,000.

Cash provided by operating activities during the First Half 2009 was $924,000 and was attributable to a decrease in net operating assets and liabilities of $2,100,000. This was partially offset by a net loss of $1,805,000, plus a deferred tax benefit of $777,000, less non-cash adjustments including depreciation and amortization of $704,000, stock option compensation of $607,000 and defined benefit plan expense of $95,000.

As of June 30, 2009, working capital was $29,502,000 and was $30,471,000 at December 31, 2008, a decrease of $969,000, or 3%. This decrease was primarily due to a decrease in accounts receivable of $1,485,000 and an increase in accounts payable of $1,508,000. These changes were offset partially by increases in cash and cash equivalents of $864,000 and inventory of $836,000. Accounts receivable decreased due to a change in the mix of product revenue favoring customers with shorter payment terms during the Second Quarter 2009 as compared with that of the Fourth Quarter 2008 and due to an early payment on June 26, 2009 by Lear Corporation (“Lear”) totaling $847,000 which would normally have been paid on July 5, 2009. This early payment is believed to have been made in contemplation of Lear’s eventual Chapter 11 Bankruptcy filing discussed below. Inventory increased primarily due to the timing of volume shipments of inventory for our North American customers. Accounts payable increased due to the timing of inventory purchases during the quarter as compared with that of the Fourth Quarter 2008. Our levels of inventory and accounts payable tend to fluctuate as a result of sourcing products from Asia and extended payment terms with certain suppliers.

Our largest customer, Lear Corporation (“Lear”), filed to reorganize its U.S. and Canadian businesses under Chapter 11 on July 7, 2009, in the U.S. Bankruptcy Court for the Southern District of New York. Lear’s subsidiaries outside of the U.S. and Canada are not part of the Chapter 11 filings. During the three and six months periods ended June 30, 2009 our revenue from Lear totaled $2,551,000 and $6,871,000, respectively, and our accounts receivable balances due from Lear on June 30, 2009 and as of July 7, 2009, the date of the bankruptcy filing, were as follows:

*(in Thousands)*

| Balances due from: | June 30, 2009 | July 7, 2009 |
| --- | ---: | ---: |
| U.S. and Canada | $215 | $616 |
| Subsidiaries outside the U.S. and Canada | 955 | 932 |
| Total | $1,170 | $1,548 |

In conjunction with the filing, Lear announced that it had received support from its lenders to implement a restructuring plan. Under the proposed restructuring plan, which needs to be approved by the Bankruptcy Court, Lear’s trade creditors, such as Amerigon, will be paid in full subject to certain limited exceptions. On July 8, 2009, Lear received interim court approval to use its cash reserves to support ongoing business operations including regular payments to its suppliers such as Amerigon. The court also issued a variety of orders that are intended to ensure that Lear will continue to operate uninterrupted throughout the reorganization process. Under these circumstances Amerigon management does not expect any significant impact on its current operations and has not recorded a bad debt provision for the outstanding Lear accounts receivable balances. If the proposed restructuring plan is not implemented as proposed, there is a risk that Amerigon will be unable to fully collect certain outstanding amounts due from Lear.

Cash used in investing activities was $828,000 during the First Half 2009, reflecting purchases of property and equipment totaling $369,000, and the cost to acquire new patents and patent application filings of $459,000. Purchases of property and equipment for the period are primarily related to new equipment purchases needed to maintain current production programs and other operational facilities.

Cash provided by financing activities was $796,000 during the First Half 2009, reflecting the proceeds of Common Stock option exercises.

### New Accounting Pronouncements

In December 2007 the Financial Accounting Standards Board (“FASB”) issued Statement of financial Accounting Standard No. 160, “Noncontrolling Interests in Consolidated Financial Statements – an amendment of ARB No. 51” (“SFAS 160”). SFAS 160 establishes accounting and reporting standards for the noncontrolling interest in a subsidiary and for the retained interest in a gain or loss when a subsidiary is deconsolidated. We adopted this statement effective January 1, 2009 and it had no impact on our operating results and financial position.

In April 2008, the FASB issued FASB Staff Position (“FSP”) FAS 142-3, “Determination of the Useful Life of Intangible Assets”. FSP FAS 142-3 amends the factors that should be considered in developing renewal or extension assumptions used to determine the useful life of a recognized intangible asset under FASB Statement No. 142, “Goodwill and Other Intangible Assets”. The intent of this FSP is to improve the consistency between the useful life of a recognized intangible asset under SFAS 142 and the period of expected cash flows used to measure the fair value of the asset under FASB Statement No. 141 (Revised 2007), Business Combinations, and other U.S. Generally Accepted Accounting Principles. We adopted this FSP effective January 1, 2009 and it had no impact on our operating results and financial position.

In May 2009, the FASB issued Statement No. 165, “Subsequent Events” (“SFAS 165”). SFAS 165 requires that an entity shall recognize in the financial statements the effects of all subsequent events that provide additional evidence about conditions that existed at the date of the balance sheet, including the estimates inherent in the process of preparing financial statements. The standard also requires entities to disclose the date through which subsequent events have been evaluated, as well as whether that date is the date the financial statements were issued or the date the financial statements were available to be issued. SFAS 165 is effective for interim or annual financial periods ending after June 15, 2009, and is to be applied prospectively. Accordingly, the Company adopted the provisions of SFAS 165 in the Second Quarter 2009. The adoption of the provisions of SFAS 165 did not have a material effect on the Company’s consolidated financial condition, results of operations, or cash flows. Refer to Note 6 for the Company’s disclosure on subsequent events.

In June 2009, the FASB issued Statement No. 168, “The FASB Accounting Standards Codification and the Hierarchy of Generally Accepted Accounting Principles—a replacement of FASB Statement No. 162” (“SFAS 168”). SFAS 168, or the FASB Accounting Standards Codification (“Codification”), will become the source of authoritative U.S. generally accepted accounting principles (“GAAP”) recognized by the FASB to be applied by nongovernmental entities. On the effective date of SFAS 168, the Codification will supersede all then-existing non-SEC accounting and reporting standards. All other non-grandfathered non-SEC accounting literature not included in the Codification will become non-authoritative. SFAS 168 is effective for financial statements issued for interim and annual periods ending after September 15, 2009. The Company does not expect the standard to have a material impact on the Company’s consolidated financial position, results of operations, or cash flows.

### Critical Accounting Policies

Critical accounting policies are those accounting policies that management believes are important to the portrayal of our financial condition and results and require management’s most difficult, subjective or complex judgments, as a result of the need to make estimates about the effect of matters that are inherently uncertain. Our 2008 annual report on Form 10-K includes a description of certain critical accounting policies, including those with respect to warranty reserves, allowances for doubtful accounts, deferred tax asset valuation allowance and inventory reserves.

### FORWARD LOOKING STATEMENTS

Certain matters discussed or referenced in this report, including expectations of increased revenues and continuing losses, our financing requirements, our capital expenditures and our prospects for the development of platforms with major automotive manufacturers, are forward-looking statements. Other forward-looking statements may be identified by the use of forward-looking terminology such as “may”, “will”, “expect”, “believe”, “estimate”, “anticipate”, “intend”, “continue”, or similar terms, variations of such terms or the negative of such terms. All forward-looking statements speak only as of the date of this report, and we expressly disclaim any obligation or undertaking to release publicly any updates or revisions to any forward-looking statements contained in this report to reflect any change in our expectations with regard to such statements or any change in events, conditions or circumstances on which any such statement is based. Although such statements are based upon our current expectations, and we believe such expectations are reasonable, such expectations, and the forward-looking statements based on them, are subject to a number of factors, risks and uncertainties that could cause our actual results to differ materially from those described in the forward-looking statements, including those described below and in our other filings with the Securities and Exchange Commission.

## Market risk

As filed, 1,210 characters.

Our exposure to market risk for changes in interest rates relates primarily to our investment portfolio and our debt obligations under our revolving line of credit.

We place our investments in debt instruments of the U.S. government and in high-quality corporate issuers. As stated in our policy, we seek to ensure the safety and preservation of our invested funds by limiting default risk and market risk. We have no investments denominated in foreign country currencies and therefore are not presently subject to foreign exchange risk.

Borrowings under our revolving line of credit bear interest at Comerica Bank’s prime rate (3.25% at June 30, 2009). As of June 30, 2009, there no borrowings outstanding under our line of credit.

The table below presents the carrying value and related weighted average interest rates for our investment portfolio. The Company considers all highly liquid investments purchased with original maturities of less than 90 days to be cash equivalents. The carrying value approximates fair value at June 30, 2009.

| Marketable Securities | Carrying Value | Average Rate of Return at June 30, 2009 (Annualized) |
| --- | ---: | ---: |
| Cash equivalents | $25,736,000 | 0.15% |

## Controls and procedures

As filed, 2,606 characters.

Management, including the Company’s President and Chief Executive Officer and Chief Financial Officer, evaluated the effectiveness of the design and operation of the Company’s disclosure controls and procedures as of the period ended June 30, 2009. Based upon, and as of the date of that evaluation, the President & Chief Executive Officer and Chief Financial Officer concluded that the disclosure controls and procedures were effective at June 30, 2009.

There was no change in our internal control over financial reporting during our fiscal quarter ended June 30, 2009 that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

Disclosure controls and procedures are our controls and other procedures that are designed to ensure that information required to be disclosed by us in the reports that we file or submit under the Exchange Act is recorded, processed, summarized and reported, within the time periods specified in the Securities and Exchange Commission’s rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by us in the reports that we file or submit under the Exchange Act is accumulated and communicated to our management, including our principal executive and principal financial officers, as appropriate to allow timely decisions regarding required disclosure.

Internal control over financial reporting is a process designed by, or under the supervision of, our President & Chief Executive Officer and Chief Financial Officer, and effected by our Board of Directors, management and other personnel, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles and includes those policies and procedures that: (1) pertain to the maintenance of records that in reasonable detail accurately and fairly reflect our transactions and dispositions of assets, (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that our receipts and expenditures are being made only in accordance with authorizations of our management and directors, and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of our assets that could have a material effect on the financial statements.

## Risk factors

As filed, 30,446 characters.

There were no material changes to the risk factors previously disclosed in the Company’s Form 10-K for the period ended December 31, 2008. Below are the risk factors applicable to the Company:

### Risks Relating to our Business

***The automotive industry, which represents our primary market, is currently in significant decline and is likely to cause our product revenues to decline***

Demand for our products is directly related to automotive vehicle production. Recently, automotive sales and production have be significantly and adversely affected by general economic and industry conditions, labor relations issues, fuel prices, regulatory requirements, trade agreements and other factors. Generally, the vehicle models offering our CCS product as an optional feature have experienced significant production declines in recent months. The automobile original equipment manufacturers (“OEMs”), especially those based in the United States, have recently experienced significant operating losses and are continuing to restructure their operations, which could have a material adverse impact on our future financial results. Continued declines in automotive production levels, particularly with respect to models for which we supply CCS products, would materially reduce our revenues and harm our profitability.

### We may suffer significant losses as the result of bankruptcy filings by major domestic automotive manufacturers

As a consequence of bankruptcy filings by OEMs General Motors and Chrysler Corporation, as well as bankruptcy filings of certain Tier 1 suppliers, such as Lear Corporation, we face the risks of being unable to collect a significant portion of our outstanding accounts receivable and of suffering a significant loss of future revenues. If one of our customers files for bankruptcy and fails to pay the accounts receivable it owes to us, that would have a materially adverse impact on our financial position. In addition, if a domestic automotive manufacturer that incorporates our products in its vehicles were to declare bankruptcy and cease operations, our future operating profits would be significantly impacted by the significant loss of revenue. We cannot be certain which of our customers will avoid filing for bankruptcy during the current significant downturn in the automotive industry.

***We have only one commercially successful product in one industry segment and we may not be able to commercialize and market additional products to other industries***

We are currently developing advanced designs of TEDs to be used in a wide range of potential products in a number of industries, but to date we have only one commercially successful product. Although we have made significant improvements in TED technology and we believe that a number of new products have become practical at our current stage of TED advancement, additional improvements are necessary to make TED based products commercially attractive in comparison with other technologies for the major markets in which we are targeting. These advancements are dependent on many variables including but not limited to new advanced materials becoming available and efficient and cost effective manufacturing processes for advanced TEDs and the related materials being developed.

### We have incurred substantial operating losses since our inception and anticipate incurring additional operating losses during upcoming periods

We incurred a net loss during the first half of 2009 totaling $1,850,000 and, although we have reported operating income during the past five years, prior to that we incurred substantial operating losses since our inception. We had net losses of $1,415,000 in 2003, $6,306,000 in 2002, and $7,691,000 in 2001. It is likely that we will have an operating loss during the remainder of 2009 due to a significant decline in our expected product revenue for that period.

We have funded our financial needs from inception primarily through net proceeds received through our initial public offering as well as other equity and debt financing. At June 30, 2009, we had cash and cash equivalents of $26,167,000. Based on our current operating plan, we believe cash at June 30, 2009, along with the proceeds from future revenues and borrowings from our $10,000,000 revolving line of credit will be sufficient to meet operating needs for the foreseeable future.

### Our ability to market our products successfully depends on acceptance of our product by original equipment manufactures and consumers

We are engaged in a lengthy development process of our advanced TEDs which involves developing prototypes for proof of concept and then adapting the basic systems to actual products produced by existing manufactures of products that may use TEDs. While we currently have active development programs with various partners no assurance can be given that our advanced TEDs will be implemented in any related products. To date, CCS is our sole high-volume commercialized product, and there is no assurance that we will be successful in marketing any additional products using TEDs.

### Significant increases in the market prices of certain raw materials may adversely affect our business

Our products contain TEDs which contain certain raw materials that cannot generally be substituted. As an example, Tellurium is a raw material used in TEDs. If the market prices for these raw materials significantly increases, our gross profit may be adversely impacted as our suppliers pass those price increases on to us. A recent increase in the price of Tellurium is one example of the impact raw material prices could have on our business. Our suppliers passed the increase in Tellurium prices on to us and our ability to recover the increase from our customers was limited. Our business and operations could also be materially adversely affected by shortages in key raw materials.

### The disruption or loss of relationships with vendors and suppliers for the components for our products could materially adversely affect our business

Our ability to manufacture and market our products successfully is dependent on relationships with both third party vendors and suppliers. We rely on various vendors and suppliers for the components of our products and procure these components through purchase orders, with no guaranteed supply arrangements. Certain components, including thermoelectric devices and the specially designed fans used in our CCS product, are only available from a limited number of suppliers. The loss of any significant supplier, in the absence of a timely and satisfactory alternative arrangement, or an inability to obtain essential components on reasonable terms or at all, could materially adversely affect our business, operations and cash flows. Our business and operations could also be materially adversely affected by delays in deliveries from suppliers.

### The outsourcing of production to other countries entails risks of production interruption and unexpected costs

We outsource production of our CCS product to lower cost countries in order to be price competitive and expand our market beyond the luxury vehicle segment. Such production is currently completed by suppliers located in Nogales, Mexico and Nagoya, Japan and three cities in China; Shenzhen, Tianjin and Hangzhou. Our use of suppliers located outside of the United States entails risk of production interruption and unexpected costs due to the extended logistics.

Automobile manufacturers demand on-time delivery of quality products, and some have required the payment of substantial financial penalties for failure to deliver components to their plants on a timely basis. Such penalties, as well as costs to avoid them, such as overtime costs and overnight air freighting of parts that normally are shipped by other less expensive means of transportation, could have a material adverse effect on our business and financial condition. Moreover, the inability to meet demand for our products on a timely basis would materially adversely affect our reputation and future commercial prospects.

### We may not be able to persuade potential customers of the merits of our products and justify their costs to increase our sales

Because of the sophisticated nature and early stage of development of our products, we have been, and will continue to be, required to educate potential customers and demonstrate that the merits of our products justify the costs associated with such products. We have relied on, and will continue to rely on, automobile manufacturers and manufacturers in other industries and their dealer networks to market our products. The success of any such relationship will depend in part on the other party’s own competitive, marketing and strategic considerations, including the relative advantages of alternative products being developed and/or marketed by any such party. There can be no assurance that we will be able to continue to market our products successfully so as to generate meaningful product sales increases or to continue at existing sales volumes.

### The sales cycle for our products is lengthy and the lengthy cycle impedes growth in our sales

The sales cycle in the automotive components industry is lengthy and can be as long as four years or more for products that must be designed into a vehicle, because some companies take that long to design and develop a vehicle. Even when selling parts that are neither safety-critical nor highly integrated into the vehicle, there are still many stages that an automotive supply company must go through before achieving commercial sales. The sales cycle is lengthy because an automobile manufacturer must develop a high degree of assurance that the products it buys will meet customer needs, interface as easily as possible with the other parts of a vehicle and with the automobile manufacturer’s production and assembly process, and have minimal warranty, safety and service problems. As a result, from the time that a manufacturer develops a strong interest in our CCS product, it normally will take several years before our CCS product is available to consumers in that manufacturer’s vehicles.

In the automotive components industry, products typically proceed through five stages of research and development. Initial research on the product concept comes first, to assess its technical feasibility and economic costs and benefits. This stage often includes development of an internal prototype for the component supplier’s own evaluation. If the product appears feasible, the component supplier manufactures a functioning prototype to demonstrate and test the product’s features. These prototypes are then marketed and sold to automotive companies for testing and evaluation. If an automobile manufacturer shows interest in the product, it typically works with the component supplier to refine the product, then purchases second and subsequent generation engineering prototypes for further evaluation. Finally, the automobile manufacturer either decides to purchase the component for a production vehicle or terminates the program.

The time required to progress through these five stages to commercialization varies widely. Generally, the more a component must be integrated with other vehicle systems, the longer the process takes. Further, products that are installed by the factory usually require extra time for evaluation because other vehicle systems are affected, and a decision to introduce the product into the vehicle is not easily reversed. Because our CCS product affects other vehicle systems and is a factory-installed item, the process takes a significant amount of time to commercialization.

Other TED products that we develop are also likely to have a lengthy sales cycle. Because such technology is new and evolving, and because customers will likely require that any new product we develop pass certain feasibility and economic viability tests before committing to purchase, it is expected that any new products we develop will take some years before they are sold to customers.

***The automotive industry is subject to intense competition and our current products may be rendered obsolete by future technological developments in the industry***

The automotive component industry is subject to intense competition. Virtually all of our competitors are substantially larger in size, have substantially greater financial, marketing and other resources, and have more extensive experience and records of successful operations than we do. Competitors are promoting new products that may compete with our CCS product. Additionally, heat only devices are readily available from our competitors at relatively low prices. Competition extends to attracting and retaining qualified technical and marketing personnel. There can be no assurance that we will successfully differentiate our products from those of our competitors, that the marketplace will consider our current or proposed products to be superior or even comparable to those of our competitors, or that we can succeed in establishing new or maintaining existing relationships with automobile manufacturers. Furthermore, no assurance can be given that competitive pressures we face will not adversely affect our financial performance.

Due to the rapid pace of technological change, as with any technology-based product, our products may even be rendered obsolete by future developments in the industry. Our competitive position would be adversely affected if we were unable to anticipate such future developments and obtain access to the new technology.

### Any failure to protect our intellectual property could harm our business and competitive position

As of December 31, 2008, we owned 12 U.S. patents and had 34 U.S. patents pending and our subsidiary BSST owned 15 U.S. patents, 16 foreign patents and had 29 U.S. patents pending and 44 foreign patents pending. We were also licensees of two patents and joint owners with Honda Motor Co. of two U.S. patents and five Japanese patents. We also owned 31 foreign patents and had 21 foreign patent applications pending. We believe that patents and proprietary rights have been and will continue to be very important in enabling us to compete. There can be no assurance that any new patents will be granted or that our or our licensors’ patents and proprietary rights will not be challenged or circumvented or will provide us with meaningful competitive advantages or that pending patent applications will issue. Furthermore, there can be no assurance that others will not independently develop similar products or will not design around any patents that have been or may be issued to our licensors or us. Failure to obtain patents in certain foreign countries may materially adversely affect our ability to compete effectively in those international markets. We hold current and future rights to licensed technology through licensing agreements requiring the payment of minimum royalties. Failure to continue with or loss of such agreements could materially and adversely affect our business.

Because of rapid technological developments in the automotive industry and the competitive nature of the market, the patent position of any component manufacturer is subject to uncertainties and may involve complex legal and factual issues. Consequently, although we either own or have licenses to certain patents, and are currently processing several additional patent applications, it is possible that no patents will issue from any pending applications or that claims allowed in any existing or future patents issued or licensed to us will be challenged, invalidated, or circumvented, or that any rights granted there under will not provide us adequate protection. There is an additional risk that we may be required to participate in interference proceedings to determine the priority of inventions or may be required to commence litigation to protect our rights, which could result in substantial costs.

### Our products may conflict with patents that have been or may be granted to competitors or others

Other persons could bring legal actions against us claiming damages and seeking to enjoin manufacturing and marketing of our products for allegedly conflicting with patents held by them. Any such litigation could result in substantial cost to us and diversion of effort by our management and technical personnel. If any such actions are successful, in addition to any potential liability for damages, we could be required to obtain a license in order to continue to manufacture or market the affected products. There can be no assurance that we would prevail in any such action or that any license required under any such patent would be made available on acceptable terms, if at all. Failure to obtain needed patents, licenses or proprietary information held by others may have a material adverse effect on our business. In addition, if we become involved in litigation, it could consume a substantial portion of our time and resources. From time to time, we receive notices from third parties suggesting that our products infringe on the proprietary rights of others.

### We rely on trade secret protection through confidentiality agreements and the agreements could be breached

We also rely on trade secrets that we seek to protect, in part, through confidentiality and non-disclosure agreements with employees, customers and other parties. There can be no assurance that these agreements will not be breached, that we would have adequate remedies for any such breach or that our trade secrets will not otherwise become known to or independently developed by competitors. To the extent that consultants, key employees or other third parties apply technological information independently developed by them or by others to our proposed projects, disputes may arise as to the proprietary rights to such information that may not be resolved in our favor. We may be involved from time to time in litigation to determine the enforceability, scope and validity of proprietary rights. Any such litigation could result in substantial cost and diversion of effort by our management and technical personnel. Additionally, with respect to licensed technology, there can be no assurance that the licensor of the technology will have the resources, financial or otherwise, or desire to defend against any challenges to the rights of such licensor to its patents.

***Our customers typically reserve the right unilaterally to cancel contracts or reduce prices, and the exercise of such right could reduce or eliminate any financial benefit to us anticipated from such contract***

Automotive customers typically reserve the right unilaterally to cancel contracts completely or to require price reductions. Although they generally reimburse companies for actual out-of-pocket costs incurred with respect to the particular contract up to the point of cancellation, these reimbursements typically do not cover costs associated with acquiring general purpose assets such as facilities and capital equipment, and may be subject to negotiation and substantial delays in receipt by us. Any unilateral cancellation of, or price reduction with respect to any contract that we may obtain could reduce or eliminate any financial benefits anticipated from such contract and could have a material adverse effect on our financial condition and results of operations. To date, we have not experienced such a cancellation and no such costs have been incurred.

The third parties that contract with our subsidiary, BSST, for research and development purposes generally also reserve the right to unilaterally terminate those contracts. There can be no assurance that BSST will continue to receive the third party reimbursements it has received over the past several years.

### Our success will depend in large part on retaining key personnel

Our success will depend to a large extent upon the continued contributions of key personnel in Amerigon and our research and development subsidiary, BSST. The loss of the services of Dr. Lon E. Bell, the President of BSST, could have a material adverse effect on the success of BSST.

Our success will also depend, in part, upon our ability to retain qualified engineering and other technical and marketing personnel. There is significant competition for technologically qualified personnel in our business and we may not be successful in recruiting or retaining sufficient qualified personnel.

### Our reliance on outside major contractors may impair our ability to complete certain projects and manufacture products on a timely basis

We have engaged outside contractors to perform product assembly and other production functions for us. We believe that there are other outside contractors that provide services of the kind that are used by us and that we may desire to use in the future. However, no assurance can be given that any such contractors would agree to work for us on terms acceptable to us or at all. Our inability to engage outside contractors on acceptable terms or at all would impair our ability to complete any development and/or manufacturing contracts for which outside contractors’ services may be needed. Moreover, our reliance upon third party contractors for certain production functions reduces our control over the manufacture of our products and makes us dependent in part upon such third parties to deliver our products in a timely manner, with satisfactory quality controls and on a competitive basis.

### Our business exposes us to potential product liability risks

Our business exposes us to potential product liability risks which are inherent in the manufacturing, marketing and sale of automotive components. In particular, there are substantial warranty and liability risks associated with our products. If available, product liability insurance generally is expensive. While we presently have product liability coverage at amounts we currently consider adequate, there can be no assurance that we will be able to obtain or maintain such insurance on acceptable terms with respect to other products we may develop, or that any insurance will provide adequate protection against any potential liabilities. In the event of a successful claim against us, a lack or insufficiency of insurance coverage could have a material adverse effect on our business and operations.

***Because many of the largest automotive manufacturers are located in foreign countries, our business is subject to the risks associated with foreign sales***

Many of the world’s largest automotive manufacturers are located in foreign countries. Accordingly, our business is subject to many of the risks of international operations, including governmental controls, tariff restrictions, foreign currency fluctuations and currency control regulations. However, historically, substantially all of our sales to foreign countries have been denominated in U.S. dollars. As such, our historical net exposure to foreign currency fluctuations has not been material. No assurance can be given that future contracts will be denominated in U.S. dollars or that existing contracts will be honored by our suppliers or customers, especially with respect to our customers and suppliers whose cost structure and revenue are denominated in other currencies.

### Our use of contractors located in foreign countries will subject us to the risks of international operations

We engage contractors located in foreign countries. Accordingly, we will be subject to all of the risks inherent in international operations, including work stoppages, transportation delays and interruptions, political instability, foreign currency fluctuations, economic disruptions, the imposition of tariffs and import and export controls, changes in governmental policies and other factors which could have an adverse effect on our business.

***The recent global economic and financial market crisis has had and may continue to have a negative effect on our business and operations.***

The recent global economic and financial market crisis has caused, among other things, a general tightening in the credit markets, lower levels of liquidity, increases in the rates of default and bankruptcy, lower consumer and business spending, and lower consumer net worth, all of which has had and may continue to have a negative effect on our business, results of operations, financial condition and liquidity. Many of our tier-one customers, their OEM customers and our suppliers have been severely affected by the current economic turmoil. There is no certainty that our customers and suppliers will continue to be in business. The current crisis could continue to lead to reduced demand for our products and could result in customer payment delays or defaults. Further, suppliers may not be able to supply us with needed raw materials on a timely basis, may increase prices or go out of business, which could result in our inability to meet consumer demand or affect our financial results.

The timing and nature of any recovery in the credit and financial markets remains uncertain, and there can be no assurance that market conditions will improve in the near future or that our financial results will not continue to be materially and adversely affected. Such conditions make it very difficult to forecast operating results, make business decisions and identify and address material business risks. The foregoing conditions may also impact the valuation of our Federal Net Operating Loss carryforwards (“NOLs”) which are subject to impairment testing, potentially resulting in impairment charges which may be material to our financial condition or results of operations.

### Credit market developments may reduce availability under our credit agreement.

Due to the current volatile state of the credit markets, there is risk that lenders, even those with strong balance sheets and sound lending practices, could fail or refuse to honor their legal commitments and obligations under existing credit commitments, including but not limited to: extending credit up to the maximum permitted by a credit facility, allowing access to additional credit features and otherwise accessing capital and/or honoring loan commitments. If our lender fails to honor their legal commitments under our $10,000,000 credit facility, it could be difficult in the current environment to replace our credit facility on similar terms. Although we believe that our cash reserves, access to capital markets and existing credit facility will give us the ability to satisfy our liquidity needs for at least the next 12 months, the failure of the lender under our credit facility may impact our ability to finance our operating or investing activities.

### Risks Relating to Share Ownership

***Our quarterly results may fluctuate significantly, and the relatively small average daily trading volume of our Common Stock may adversely affect the liquidity of our Common Stock and stock price***

Our quarterly operating results may fluctuate significantly in the future due to such factors as acceptance of our product by automotive manufacturers and consumers, timing of our product introductions, availability and pricing of components from third parties, competition, timing of orders, foreign currency exchange rates, technological changes and economic conditions generally. Broad market fluctuations in the stock markets can adversely affect the market price of our Common Stock. In addition, failure to meet or exceed analysts’ expectations of financial performance may result in immediate and significant price and volume fluctuations in our Common Stock.

Historically, the average daily trading volume of our Common Stock has been relatively low as compared to the total number of outstanding shares of Common Stock. Without a significantly larger number of shares made available for trading by the public, our Common Stock is less liquid than stocks with more trading activity, and as a result, trading prices of our Common Stock may significantly fluctuate and certain institutional investors may be unwilling to invest in such a thinly traded security.

***We have anti-takeover defenses that could make it more difficult for a third party to acquire a majority of our outstanding voting stock.***

Our Board of Directors has the authority to issue up to 4,991,000 shares of Preferred Stock and to determine the price, rights (including conversion rights), preferences and privileges of those shares without any further vote or action by the shareholders. Consistent with this authority, in January, 2009 our Board adopted a Shareholder Rights Plan (the “Rights Plan”) in which one purchase right was distributed as a dividend on each share of common stock held of record as of the close of business on February 10, 2009 (the “Rights”). If exercisable, each Right will entitle its holder to purchase from the Company one one-thousandth of a share of a newly created Series B Preferred Stock of the Company for $20.00 (the “Purchase Price”). The Rights will become exercisable if any person or group becomes the beneficial owner of 15% or more of the Company’s common stock or has commenced a tender or exchange offer which, if consummated, would result in any person or group becoming the beneficial owner of 15% or more of the Company’s common stock. If any person or group becomes the beneficial owner of 15% or more of the Company’s common stock, each right will entitle its holder, other than the acquiring person, to purchase a number of shares of the Company’s or the acquiror’s common stock having a value of twice the Purchase Price. The Rights are deemed attached to the certificates representing outstanding shares of common stock. The Rights Plan is designed to deter coercive takeover tactics and to prevent an acquiror from gaining control of the Company without offering a fair price to all of the Company’s shareholders; however, the existence of the Rights Plan and the rights of holders of any other shares of preferred stock that may be issued in the future, could have the effect of making it more difficult for a third party to acquire a majority of our outstanding voting stock.

### We do not anticipate paying dividends on our Common Stock

We have never paid any cash dividends on our Common Stock and do not anticipate paying dividends in the near future.

Filed Aug 10, 2009.
Source: SEC EDGAR, the filing index for accession 0001193125-09-170532. Last ingested by Listed: Oct 26, 2026, 17:44 ET. No prices; not investment advice.
