# Wolfspeed, Inc.: Form 10-Q for the period ended Dec 27, 2009

- Company: [Wolfspeed, Inc.](/companies/wolf.md) (CIK 895419)
- Form: 10-Q
- Filed: 2010-01-20
- Accepted by EDGAR: Jan 20, 2010, 17:29 ET
- Period: 2009-12-27
- Accession: 0001193125-10-008654
- Inline XBRL: no
- Main document: https://www.sec.gov/Archives/edgar/data/895419/000119312510008654/d10q.htm
- All documents and exhibits: https://www.sec.gov/Archives/edgar/data/895419/000119312510008654/

## Management's discussion and analysis

As filed, 33,708 characters.

*Information set forth in this Quarterly Report on Form 10-Q contains various “forward-looking statements” within the meaning of Section 27A of the Securities Act of 1933, as amended (Securities Act), and Section 21E of the Securities Exchange Act of 1934, as amended (Exchange Act). All information contained in this report relative to future markets for our products and trends in and anticipated levels of revenue, gross margins and expenses, as well as other statements containing words such as “believe,” “project,” “may,” “will,” “anticipate,” “target,” “plan,” “estimate,” “expect” and “intend” and other similar expressions constitute forward-looking statements. These forward-looking statements are subject to business, economic and other risks and uncertainties, both known and unknown, and actual results may differ materially from those contained in the forward-looking statements. Any forward-looking statements we make are as of the date made and we have no duty to update them if our views later change. These forward-looking statements should not be relied upon as representing our views as of any date subsequent to the date of this Quarterly Report. Examples of risks and uncertainties that could cause actual results to differ materially from historical performance and any forward-looking statements include, but are not limited to, those described in “Risk Factors” in Part II, Item 1A of this Quarterly Report.*

The following discussion is designed to provide a better understanding of our unaudited consolidated financial statements, including a brief discussion of our business and products, key factors that impacted our performance, and a summary of our operating results. The following discussion should be read in conjunction with the unaudited condensed consolidated financial statements and the notes thereto included in Part I, Item 1 of this Quarterly Report on Form 10-Q, and the consolidated financial statements and notes thereto and Management’s Discussion and Analysis of Financial Condition and Results of Operations contained in our Annual Report on Form 10-K for the year ended June 28, 2009. Historical results and percentage relationships among any amounts in the financial statements are not necessarily indicative of trends in operating results for any future periods.

### Overview of our Business and Products

Cree, Inc. (“Cree,” “we,” “our,” or “us,”) develops and manufactures semiconductor materials and devices primarily based on silicon carbide (SiC), gallium nitride (GaN) and related compounds. We primarily focus our expertise in SiC and GaN on light emitting diode (LED) products. We also develop power and radio frequency (RF) products, including power switching and RF devices. Our revenues are classified as follows:

- *LED products.* We derive the largest portion of our revenue from the sale of our LED products. These products consist of LED components, LED chips, LED lighting products and SiC and GaN wafers. Also included are revenues derived from government agencies to support the development of LED lighting.
- *Power and RF products.* These products include power switching devices made from SiC, which provide faster switching speeds than comparable silicon-based power devices, and also include RF devices made from SiC or GaN, which allow for higher power densities as compared to silicon or gallium arsenide. Also included are revenues derived from government agencies to support the development of SiC and GaN based power and RF technology.

The majority of our products are manufactured at our production facilities located in North Carolina and China. We also use contract manufacturers for certain aspects of product fabrication.

### Operating Segments

We currently operate our business as one reportable segment.

### Industry Dynamics

Our business is primarily focused on selling our LED products. LEDs are currently used in a variety of applications, including energy-efficient indoor and outdoor lighting, liquid crystal display (LCD) backlighting, video screens, gaming, signals, automotive applications and mobile phones. As LED technology continues to develop and improve, we believe the potential market for LED lighting applications will continue to expand.

Select industry factors affecting our business include, among others:

- *Overall demand for products and applications using LEDs.* We have seen an increase in demand for LEDs for lighting products and backlighting in notebook and television applications. The pace of adoption of LED lighting technology in the general illumination market, backlighting and other markets will impact the demand for LEDs as well as other factors.
- *Intense and constantly evolving competitive environment.* Competition in the industry is intense. Product pricing pressures exist as market participants often undertake pricing strategies to gain or protect market share. To remain competitive, market participants generally must increase product performance and reduce costs to offset lower average sales prices. In addition to competing for customers, market participants must also compete for raw materials and other resources (such as specialized manufacturing equipment) to adequately meet demand, which may be in limited supply especially in times of rapid market growth.
- *Technological innovation and advancement.* Innovations and advancements in LED technology continue to expand the potential applications for LEDs. However, new technologies could emerge or improvements could be made in existing technologies that may reduce the demand for LEDs in certain markets.
- *Rising energy costs and regulatory actions concerning energy efficiency.* Government regulations and programs designed to encourage or mandate increased energy efficiency, even in some cases banning forms of incandescent lighting, are advancing the adoption of more energy efficient lighting solutions including LEDs as well as other technologies.
- *Intellectual property issues.* Market participants rely on patented and non-patented proprietary information relating to product development, manufacturing capabilities and other core competencies of their business. Protection of intellectual property is critical. As such, steps including patent applications, confidentiality and non-disclosure agreements, as well as other security measures are generally taken. To enforce or protect intellectual property rights, litigation or threatened litigation commonly occurs.

### Highlights of the Second Quarter of Fiscal 2010

The following is a summary of our financial results for the three months ended December 27, 2009:

- Our year over year revenues increased 35.1% to $199.5 million;
- Our year over year gross margin percentage (gross profit as a percent of revenue) increased to 47.2% in the second quarter of fiscal 2010 from 38.3% in the second quarter of fiscal 2009;
- We achieved operating income of $46.0 million in the second quarter of fiscal 2010 compared to $11.5 million in the second quarter of fiscal 2009. Net income per diluted share was $0.32 compared to $0.12 for the second quarter of fiscal 2009;
- We generated positive cash flow from operations of $21.5 million in the second quarter of fiscal 2010 compared to $40.8 million in the second quarter of fiscal 2009;
- We spent $41.4 million on capital expenditures in the second quarter of fiscal 2010 compared to $17.6 million in the second quarter of fiscal 2009;
- Combined cash, cash equivalents and marketable investments increased to $954.1 million at December 27, 2009 compared to $447.2 million at June 28, 2009;

### Results of Operations

The following table sets forth certain consolidated statement of income data for the periods indicated:

*(Dollars in Thousands, Except Per Share Data)*

|  | Three Months Ended December 27, 2009 Dollars % of Revenue | Three Months Ended December 28, 2008 Dollars % of Revenue |
| --- | ---: | ---: |
| **Revenue, net** | **$199,475** **100.0%** | **$147,623** **100.0%** |
| Cost of revenue, net | 105,405 52.8% | 91,127 61.7% |
| **Gross profit** | **94,070** **47.2%** | **56,496** **38.3%** |
| Research and development | 19,325 9.7% | 18,441 12.5% |
| Sales, general and administrative | 25,560 12.8% | 21,843 14.8% |
| Amortization of acquistion related intangibles | 3,045 1.5% | 4,062 2.8% |
| Loss on disposal or impairment of long-lived assets | 110 0.1% | 645 0.4% |
| **Operating income** | **46,030** **23.1%** | **11,505** **7.8%** |
| Gain on sale of investments, net | 1 0.0% | 53 0.0% |
| Other non-operating expense | (41) 0.0% | (183) -0.1% |
| Interest income, net | 2,001 1.0% | 2,539 1.7% |
| **Income before income taxes** | **47,991** **24.1%** | **13,914** **9.4%** |
| Income tax expense | 14,205 7.1% | 3,218 2.2% |
| **Net income** | **33,786** **17.0%** | **10,696** **7.2%** |
| **Diluted earnings per share** | **$0.32** | **$0.12** |
|  | **Six Months Ended December 27, 2009** | **Six Months Ended December 28, 2008** |
| **(Dollars in Thousands, Except Per Share Data)** | **Dollars** **% of Revenue** | **Dollars** **% of Revenue** |
| **Revenue, net** | **$368,605** **100.0%** | **$288,001** **100.0%** |
| Cost of revenue, net | 200,757 54.5% | 182,142 63.2% |
| **Gross profit** | **167,848** **45.5%** | **105,859** **36.8%** |
| Research and development | 39,499 10.7% | 35,716 12.4% |
| Sales, general and administrative | 49,173 13.3% | 44,761 15.5% |
| Amortization of acquistion related intangibles | 6,090 1.7% | 8,124 2.8% |
| Loss on disposal or impairment of long-lived assets | 403 0.1% | 1,050 0.4% |
| **Operating income** | **72,683** **19.7%** | **16,208** **5.7%** |
| Gain on sale of investments, net | 1 0.0% | 65 0.0% |
| Other non-operating income (expense) | 90 0.0% | (17) 0.0% |
| Interest income, net | 3,631 1.0% | 5,331 1.9% |
| **Income before income taxes** | **76,405** **20.7%** | **21,587** **7.6%** |
| Income tax expense | 21,593 5.9% | 4,972 1.7% |
| **Net income** | **54,812** **14.8%** | **16,615** **5.9%** |
| **Diluted earnings per share** | **$0.55** | **$0.19** |

### Revenues

Revenues for the three and six months ended December 27, 2009 and December 28, 2008 were comprised of the following (in thousands, except percentages):

|  | Three Months Ended December 27, 2009 | December 28, 2008 | Change |  | Six Months Ended December 27, 2009 | December 28, 2008 | Change |  |
| --- | ---: | ---: | ---: | ---: | ---: | ---: | ---: | ---: |
| LED products | $181,986 | $138,735 | $43,251 | 31% | $338,013 | $268,621 | $69,392 | 26% |
| Percent of total revenues | 91% | 94% |  |  | 92% | 93% |  |  |
| Power and RF products | 17,489 | 8,888 | 8,601 | 97% | 30,592 | 19,380 | 11,212 | 58% |
| Percent of total revenues | 9% | 6% |  |  | 8% | 7% |  |  |
| Total revenues | $199,475 | $147,623 | $51,852 | 35% | $368,605 | $288,001 | $80,604 | 28% |

#### LED Products

We derive the largest portion of our revenue from the sale of our LED products which comprised approximately 91% and 94% of our total revenues for the second quarter of fiscal 2010 and fiscal 2009, respectively. For the six months ended December 27, 2009 and December 28, 2008, revenue from the sale of our LED products comprised approximately 92% and 93% of our total revenues, respectively.

Revenue from LED products increased approximately 31% to $182.0 million in the second quarter of fiscal 2010 from $138.7 million in the second quarter of fiscal 2009. For the six months ended December 27, 2009, revenue from our LED products increased approximately 26% to $338.0 million from $268.6 million for the six months ended December 28, 2008. The continuing adoption of LEDs in general lighting in addition to an increase in demand for LEDs in backlighting applications for notebooks and televisions, drove year over year sales increases in both our LED components and LED chips products. The blended average selling price (ASP) for our LED products decreased by 8% in the second quarter of fiscal 2010 from the second quarter of fiscal 2009 due to the ongoing competitive pricing environment for our LED products.

#### Power and RF Products

Revenue from power and RF increased approximately 97% to $17.5 million in the second quarter of fiscal 2010 from $8.9 million in the second fiscal quarter of 2009. For the six months ended December 27, 2009, revenue from our power and RF products increased approximately 58% to $30.6 million from $19.4 million for the six months ended December 28, 2008. The increase in our power and RF products revenue was primarily due to an increase in orders for SiC Schottky diodes and GaN RF devices. Revenues from our power and RF products comprised approximately 9% and 6% of our total revenues for the second quarter of fiscal 2010 and fiscal 2009, respectively. For the six months ended December 27, 2009 and December 28, 2008, revenue from the sale of our power and RF products comprised approximately 8% and 7% of our total revenues, respectively. The blended ASP for our power and RF products decreased by 22% in the second quarter of fiscal 2010 from the second quarter of fiscal 2009 due to a change in product mix to a higher proportion of sales of products with lower selling prices. Included within revenues from power and RF products were revenues related to research contracts which declined approximately 6% from the second quarter of fiscal 2009 to the second quarter of fiscal 2010.

### Gross Profit

Cost of revenue includes materials, labor and overhead costs incurred internally or paid to contract manufacturers to produce our products. Gross profit and gross margin (gross profit as a percentage of revenue) were as follows (in thousands, except percentages):

|  | Three Months Ended December 27, 2009 | December 28, 2008 | Change |  | Six Months Ended December 27, 2009 | December 28, 2008 | Change |  |
| --- | ---: | ---: | ---: | ---: | ---: | ---: | ---: | ---: |
| Total gross profit | $94,070 | $56,496 | $37,574 | 67% | $167,848 | $105,859 | $61,989 | 59% |
| Total gross margin | 47.2% | 38.3% |  |  | 45.5% | 36.8% |  |  |

23

Gross profit in the second quarter of fiscal 2010 increased approximately 67% to $94.1 million from $56.5 million in the second quarter of fiscal 2009. For the six months ended December 27, 2009 gross profit increased approximately 59% to $167.8 million from $105.9 million for the six months ended December 28, 2008. For the three months ended December 27, 2009 our gross margin increased to 47.2% from 38.3% for the three months ended December 28, 2008. For the six months ended December 27, 2009 our gross margin increased to 45.5% from 36.8% for the six months ended December 28, 2008. Factors contributing to the increase in gross margin were changes in product mix to higher margin products, lower production costs across our product lines due to greater utilization and higher production yields, and a favorable pricing environment for our LED components and LED chips.

### Research and Development

Research and development (R&D) expenses include costs associated with the development of new products, enhancements of existing products and general technology research. These costs consist primarily of employee base compensation, variable compensation based on performance, occupancy costs, consulting costs and the cost of development equipment and supplies.

The following sets forth our research and development expenses in dollars and as a percentage of revenues (in thousands, except percentages):

|  | Three Months Ended December 27, 2009 | December 28, 2008 | Change December 27, 2009 |  | Six Months Ended December 28, 2008 | Change |  |  |
| --- | ---: | ---: | ---: | ---: | ---: | ---: | ---: | ---: |
| Research and development | $19,325 | $18,441 | $884 | 5% | $39,499 | $35,716 | $3,783 | 11% |
| Percent of total revenues | 10% | 13% |  |  | 11% | 12% |  |  |

Research and development expenses in the second quarter of fiscal 2010 increased 5% to $19.3 million from $18.4 million in the second quarter of fiscal 2009. For the six months ended December 27, 2009 research and development expenses increased 11% to $39.5 million from $35.7 million for the six months ended December 28, 2008. The increase was due to our continued research and development activities focusing on higher brightness LED chips, new and improved LED products, transition to larger wafers and power and RF initiatives. Our research and development expenses vary significantly from quarter to quarter based on a number of factors, including: the timing of new product introductions, timing of expenditures and the number and nature of our ongoing research and development activities. However, we anticipate that in general our research and development expenses will continue to increase over time as we view these activities as essential to our ongoing operations and future growth.

### Sales, General and Administrative

Sales, general and administrative expenses are composed primarily of costs associated with our sales and marketing personnel and our executive and administrative personnel (for example, legal, finance, information technology and human resources personnel) and consist of 1) employee base compensation, sales commissions, variable compensation based on performance, 2) consulting and other professional services (such as litigation and other outside legal counsel fees, audit and other compliance costs), 3) facilities and insurance costs, and 4) travel and other costs. The following table sets forth our sales, general and administrative expenses in dollars and as a percentage of revenues (in thousands, except percentages):

|  | Three Months Ended December 27, 2009 | December 28, 2008 | Change |  | Six Months Ended December 27, 2009 | December 28, 2008 | Change |  |
| --- | ---: | ---: | ---: | ---: | ---: | ---: | ---: | ---: |
| Sales, general and administrative | $25,560 | $21,843 | $3,717 | 17% | $49,173 | $44,761 | $4,412 | 10% |
| Percent of total revenues | 13% | 15% |  |  | 13% | 16% |  |  |

Sales, general and administrative expenses in the second quarter of fiscal 2010 increased 17% to $25.6 million from $21.8 million in the second quarter of fiscal 2009. For the six months ended December 27, 2009, sales, general and administrative expenses increased 10% to $49.2 million from $44.8 million for the six months ended December 28 2008. The increase was due primarily to increased spending on sales and marketing as we continued to expand our sales channels. Additionally, costs increased due to the general expansion of our business and increased employee compensation costs.

### Amortization of Acquisition Related Intangibles

As a result of our acquisitions, we have recorded various intangible assets that require amortization, principally customer relationships and developed technologies. Amortization of intangible assets related to our acquisitions is as follows (in thousands):

|  | Three Months Ended December 27, 2009 | December 28, 2008 | Change | Six Months Ended December 27, 2009 | December 28, 2008 | Change |
| --- | ---: | ---: | ---: | ---: | ---: | ---: |
| INTRINSIC | $186 | $186 | $— | $372 | $372 | $— |
| COTCO | 2,073 | 3,090 | (1,017) | 4,146 | 6,180 | (2,034) |
| LLF | 786 | 786 | — | 1,572 | 1,572 | — |
| Total | $3,045 | $4,062 | $(1,017) | $6,090 | $8,124 | $(2,034) |

Amortization of acquisition related intangibles was $3.0 million in the second quarter of fiscal 2010 compared to $4.1 million in the second quarter of fiscal 2009. For the six months ended December 27, 2009 and December 28, 2008, amortization of acquisition related intangibles was approximately $6.1 million and $8.1 million, respectively. The year over year decline in amortization expense is attributable to lower amortization expense related to the intangibles acquired through the COTCO acquisition.

### Loss on Disposal or Impairment of Long-Lived Assets

We operate a capital intensive business. As such, we dispose of a certain level of our equipment in the normal course of business as our production processes change due to production improvement initiatives or product mix changes. Due to the risk of technological obsolescence or changes in our production process, we regularly review our equipment for possible impairments in value. The following table sets forth our loss on disposal or impairment of long-lived assets (in thousands):

|  | Three Months Ended December 27, 2009 | December 28, 2008 | Change | Six Months Ended December 27, 2009 | December 28, 2008 | Change |
| --- | ---: | ---: | ---: | ---: | ---: | ---: |
| Loss on disposal or impairment of long-lived assets | $110 | $645 | $(535) | $403 | $1,050 | $(647) |

We recorded a net loss of $0.1 million on the disposal of long-lived assets in the second quarter of fiscal 2010 compared to a net loss of $0.6 million in the second quarter of fiscal 2009. For the six months ended December 27, 2009 we recorded a loss of $0.4 million compared to $1.1 million for the six months ended December 28, 2008. These losses are due to the impairment or disposal of certain equipment and the impairment of certain capitalized patent costs.

### Non-Operating Income

The following table sets forth our non-operating income (in thousands):

|  | Three Months Ended December 27, 2009 | December 28, 2008 | Change | Six Months Ended December 27, 2009 | December 28, 2008 | Change |
| --- | ---: | ---: | ---: | ---: | ---: | ---: |
| Gain on sale of investments, net | $1 | $53 | $(52) | $1 | $65 | $(64) |
| Other non-operating (expense) income | $(41) | $(183) | $142 | $90 | $(17) | $107 |
| Interest income, net | $2,001 | $2,539 | $(538) | $3,631 | $5,331 | $(1,700) |

For the three and six months ended December 27, 2009 and December 28, 2008 we did not have any significant gains or losses realized from the sale of our investments.

We have historically invested portions of our available cash in fixed interest rate securities such as high-grade corporate debt, commercial paper, government securities, and other fixed interest rate investments. The primary objective of our investments is to preserve principal while maximizing our yields.

Net interest income was $2.0 million compared to $2.5 million for the second quarter of fiscal 2010 and fiscal 2009, respectively. For the six months ended December 27, 2009 net interest income was $3.6 million compared to $5.3 million for the six months ended December 28, 2008. Year over year interest income decreased due to declining interest rates on our cash and investments.

Other non-operating income is comprised primarily of foreign exchange gains and losses.

### Income Tax Benefit or Expense

The following table sets forth our income tax expense in dollars (in thousands) and our effective tax rate:

|  | Three Months Ended December 27, 2009 | December 28, 2008 | Change | Six Months Ended December 27, 2009 | December 28, 2008 | Change |
| --- | ---: | ---: | ---: | ---: | ---: | ---: |
| Income tax expense | $14,205 | $3,218 | $10,987 | $21,593 | $4,972 | $16,621 |
| Effective tax rate | 29.6% | 23.1% |  | 28.3% | 23.0% |  |

The variation between the Company’s effective tax rate and the U.S. statutory rate of 35 percent is primarily due to the consolidation of our foreign operations, which are subject to income taxes at lower statutory rates. A change in the mix of pretax income from these various tax jurisdictions can have a significant impact on our periodic effective tax rate.

We recorded income tax expense of $14.2 million for an effective tax rate of 29.6% in the second quarter of fiscal 2010 as compared to income tax expense of $3.2 million for an effective tax rate of 23.1% in the second quarter of fiscal 2009. For the six months ended December 27, 2009 we recorded income tax expense of $21.6 million for an effective tax rate of 28.3% as compared to income tax expense of $5.0 million for an effective tax rate of 23.0% for the six months ended December 28, 2008. The increase in our effective tax rate is primarily due to an increase in U.S. taxable profits at the higher U.S. tax rates.

### Liquidity and Capital Resources

### Overview

We require cash to fund our operating expenses and working capital requirements, including outlays for research and development, capital expenditures, strategic acquisitions and investments. Our principal sources of liquidity are cash on hand, marketable investments and cash generated from operations. Our ability to generate cash from operations has been one of our fundamental strengths and has provided us with substantial flexibility in meeting our operating, financing and investing needs. We have no debt or lines of credit and have minimal lease commitments. Based on past performance and current expectations, we believe our cash and cash equivalents, investments, and cash generated from operations, and our ability to access capital markets will satisfy our working capital needs, capital expenditures, investment requirements, stock repurchases, contractual obligations, commitments and other liquidity requirements associated with our operations through at least the next 12 months.

From time to time, we evaluate strategic opportunities and potential investments in complementary businesses and we anticipate continuing to make such evaluations. We may also access capital markets through the issuance of new debt or additional shares of common stock in connection with the acquisition of complementary businesses or other significant assets or for other strategic opportunities.

### Financial Condition

Our liquidity and capital resources depend on our cash flows from operations and our working capital. Our working capital increased to $1.1 billion as of December 27, 2009 from $500.8 million at June 28, 2009, primarily due to our public offering of 12.65 million common shares as well as positive cash flows from operations and cash generated through the exercise of employee stock options. The following table presents the components of our cash conversion cycle for our second fiscal quarter of 2010 and fourth fiscal quarter of 2009:

|  | December 27, 2009 | June 28, 2009 | Change |
| --- | ---: | ---: | ---: |
| Days of sales outstanding (a) | 51 | 63 | (12) |
| Days of supply in inventory (b) | 80 | 79 | 1 |
| Days in accounts payable (c) | (48) | (39) | (9) |
| Cash conversion cycle | 83 | 103 | (20) |

(a) Days of sales outstanding (DSO) calculates the average collection period of our accounts receivable. DSO is based on the ending net trade receivables and the most recent quarterly revenue for each period. DSO is calculated by dividing accounts receivable, net of allowance for doubtful accounts and revenue reserves, by average net revenue for the current quarter (90 days).

(b) Days of supply in inventory (DSI) measures the average number of days from procurement to sale of our product. DSI is based on net ending inventory and most recent quarterly cost of sales for each period. DSI is calculated by dividing net ending inventory by average cost of goods sold for the current quarter (90 days).

(c) Days in accounts payable (DPO) calculates the average number of days our payables remain outstanding before payment. DPO is based on ending accounts payable and most recent quarterly cost of sales for each period. DPO is calculated by dividing accounts payable by average cost of goods sold for the current quarter (90 days).

Overall our cash conversion cycle, or days to cash, improved by a net 20 days.

As of December 27, 2009, substantially all of our investments had investment grade ratings, and any such investments that were in an unrealized loss position at December 27, 2009 were in such position due to interest rate changes, sector credit rating changes or company-specific rating changes. As we intend and believe that we have the ability to hold such investments for a period of time that will be sufficient for anticipated recovery in market value, we currently expect to receive the full principal or recover our cost basis in these securities. When evaluating our investments for possible impairment, we review factors such as the length of time and extent to which fair value has been below our cost basis, the financial condition of the entity in which the investment is made, and our ability and intent to hold the investment for a period of time that may be sufficient for anticipated recovery in market value. The declines in value of the securities in our portfolio are considered to be temporary in nature and, accordingly, we do not believe these securities are impaired as of December 27, 2009.

We believe our current working capital and anticipated cash flows from operations will be adequate to meet our cash needs for our daily operations and capital expenditures for the remainder of fiscal 2010. We have and may continue to use a portion of our available cash and cash equivalents, or funds underlying our marketable securities, to repurchase shares of our common stock. With our strong working capital position, we believe that we have the ability to continue to invest in further development of our products and, when necessary or appropriate, make selective acquisitions or other strategic investments to strengthen our product portfolio, secure key intellectual properties, or expand our production capacity.

### Cash Flows

In summary, our cash flows were as follows (in thousands):

|  | Six Months Ended December 27, 2009 | December 28, 2008 | Change |
| --- | ---: | ---: | ---: |
| Cash provided by operating activities | $82,699 | $84,740 | $(2,041) |
| Cash used in investing activities | (439,225) | (154,559) | (284,666) |
| Cash provided by financing activities | 548,739 | 3,902 | 544,837 |
| Effects of foreign exchange changes | 190 | (479) | 669 |
| Net increase (decrease) in cash and cash equivalents | $192,403 | $(66,396) | $258,799 |

The following is a discussion of our primary sources and uses of cash in our operating, investing and financing activities.

#### Cash Flows from Operating Activities

Net cash provided by operating activities was $82.7 million in the first six months ended December 27, 2009 compared to $84.7 million for the six months ended December 28, 2008. The decrease in cash provided by operating activities during the first six months of fiscal 2010 compared to the same period of the prior year is primarily due to increases in working capital requirements (inventories and accounts receivable) to support the overall growth of the business, offset in part by year over year increases in our operating income.

#### Cash Flows from Investing Activities

Our investing activities primarily relate to transactions within our investments, strategic acquisitions, purchase of property, plant and equipment and purchase of patent and license rights. Net cash used in investing activities was $439.2 million for the six months ended December 27, 2009 compared to $154.6 million for the six months ended December 28, 2008. During the six months ended December 27, 2009, we invested a portion of the funds raised through our follow-on public offering in available-for-sale securities and increased expenditures related to property and equipment to expand our production capacity. Cash used in investing activities also included a $57.1 million cash expenditure related to the second and final contingent consideration payment related to the COTCO acquisition and is comparable to the first contingent consideration payment of $60.0 million made in the first quarter of fiscal 2009.

#### Cash Flows from Financing Activities

Net cash provided by financing activities was $548.7 million for the first six months ended December 27, 2009 compared to $3.9 million for the six months ended December 28, 2008. In the current year, cash provided by financing activities increased primarily from a year over year increase in net proceeds from the issuance of common stock. This year over year increase was due to our sale of 12.65 million shares of our common stock with net proceeds of approximately $434.0 million and current year increases in employee stock option exercises.

### Off-Balance Sheet Arrangements

We do not use off-balance sheet arrangements with unconsolidated entities or related parties, nor do we use other forms of off-balance sheet arrangements. Accordingly, our liquidity and capital resources are not subject to off-balance sheet risks from unconsolidated entities. As of December 27, 2009, we did not have any off-balance sheet arrangements, as defined in Item 303(a)(4)(ii) of SEC Regulation S-K.

We have entered into operating leases primarily for certain of our facilities in the normal course of business. These arrangements are often referred to as a form of off-balance-sheet financing. Please refer to Part II, Item 7 of our Annual Report on Form 10-K for the fiscal year ended June 28, 2009, in the section entitled “Contractual Obligations” for the future minimum lease payments due under our operating leases as of June 28, 2009.

### Critical Accounting Policies and Estimates

For information about our other critical accounting policies and estimates, see the “Critical Accounting Policies and Estimates” section of “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations” in our Annual Report on Form 10-K for the fiscal year ended June 28, 2009.

### Recent Accounting Pronouncements

See Note 1, “Basis of Presentation and Changes in Significant Accounting Policies,” to our unaudited financial statements in Part I, Item 1 of this Quarterly Report for a description of recent accounting pronouncements, including the expected dates of adoption and estimated effects, if any, on our consolidated financial statements.

## Market risk

As filed, 155 characters.

For quantitative and qualitative disclosures about our market risks, see Item 7A of our Annual Report on Form 10-K for the fiscal year ended June 28, 2009.

## Controls and procedures

As filed, 1,531 characters.

Our management, with the participation of our Chief Executive Officer and Chief Financial Officer, has evaluated the effectiveness of our disclosure controls and procedures (as such term is defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act) as of the end of the period covered by this Form 10-Q. Based on such evaluation, our Chief Executive Officer and Chief Financial Officer concluded that, as of the end of the period covered by this Form 10-Q, our disclosure controls and procedures are effective in that they provide reasonable assurances that the information we are required to disclose in the reports we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods required by the United States Securities and Exchange Commission’s rules and forms.

We routinely review our internal control over financial reporting and from time to time make changes intended to enhance the effectiveness of our internal control over financial reporting. We will continue to evaluate the effectiveness of our disclosure controls and procedures and internal control over financial reporting on an ongoing basis and will take action as appropriate. There have been no changes to our internal control over financial reporting, as such term is defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act, during the second quarter of fiscal 2010 that we believe materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

## Risk factors

As filed, 43,428 characters.

Described below are various risks and uncertainties that may affect our business. The descriptions below include any material changes to and supersede the description of the risk factors affecting our business previously disclosed in “Part I, Item IA. Risk Factors” of our Annual Report on Form 10-K for the fiscal year ended June 28, 2009. If any of the risks described below actually occurs, our business, financial condition or results of operations could be materially and adversely affected.

### We face significant challenges managing our growth.

We have experienced a period of significant growth over the past few years that may challenge our management and other resources. We continue to transform our business to support a global LED components and LED lighting product customer base, as well as our Power and RF business. In order to manage our growth and change in our strategy effectively, we must continue to:

- Maintain, expand and purchase adequate manufacturing facilities and equipment to meet customer demand;
- maintain a sufficient supply of raw materials to support our growth;
- expand research and development, sales and marketing, technical support, distribution capabilities and administrative functions;
- expand the skills and capabilities of our current management team;
- add experienced senior level managers; and
- attract and retain qualified employees.

While we intend to focus on managing our costs and expenses, over the long term we expect to invest substantially to support our growth and may have additional unexpected costs. For example, we recently purchased a 592,000-square-foot facility in Huizhou, Guangdong Province, China to support LED chip and future LED component production. However, such investments take time to become fully operational, and we may not be able to expand quickly enough to exploit potential targeted market opportunities. There are also inherent execution risks in ramping up a new factory that could increase costs and reduce our operating results.

We are also increasingly dependent on information technology to enable us to improve the effectiveness of our operations and to maintain financial accuracy and efficiency. If we do not allocate and effectively manage the resources necessary to build, implement and sustain the proper technology infrastructure, we could be subject to transaction errors, processing inefficiencies, loss of customers, business disruptions or loss of or damage to intellectual property through security breach.

In connection with our efforts to cost-effectively manage our growth, we have increasingly relied on subcontractors for production capacity, logistics support and certain administrative functions, such as payroll processing. If these service providers do not perform effectively, we may not be able to achieve the expected cost savings and may incur additional costs to correct errors or fulfill customer demand. Depending on the function involved, such errors may also lead to business disruption, processing inefficiencies or the loss of or damage to intellectual property through security breach, or impact employee morale. Our operations may also be negatively impacted if any of these service providers do not have the financial capability to meet our growing needs.

***Our results of operations, financial condition and business could be harmed if we were unable to balance customer demand and capacity.***

As customer demand for our products changes, we must be able to ramp up or adjust our production capacity to meet demand. We are continually taking steps to address our manufacturing capacity needs for our products. For example, we purchased a 592,000-square-foot facility in Huizhou, Guangdong Province, China to support LED chip and future LED component production. If we are not able to increase our production capacity at our targeted rate, or if there are unforeseen costs associated with adjusting our capacity levels, we may not be able to achieve our financial targets.

Conversely, due to the proportionately high fixed cost nature of our business (such as facility expansion costs), if demand does not increase at the rate forecasted, we may not reach our targeted operating margins due to excess facilities and manufacturing capacity. Additionally, if demand decreases, we may not be able to reduce manufacturing expenses or overhead costs at the same rate as demand, which could also result in lower margins and adversely impact our business and results of operations.

Inventory management also continues to be an area of focus for our growing business. Due to recent rapid increases in demand for our products, we have seen some product lead time extensions. Longer quoted delivery lead times in the past have caused some customers to place the same order multiple times within our various sales channels and to seek to cancel the duplicative orders upon receipt of the product, or to place orders with other vendors with shorter quoted delivery lead times. Although we have not seen significant evidence of this behavior recently, if such multiple ordering (along with other factors) were to occur, the increased risk of order cancellation may cause difficulty in predicting future sales and, as a result, could impair our ability to manage our inventory levels effectively. In addition, our efforts to improve quoted delivery lead-time performance may result in corresponding reductions in order backlog. A decline in backlog levels could result in more variability and less predictability in our quarter-to-quarter net sales and operating results.

***The markets in which we operate are highly competitive and have evolving technical requirements.***

The markets for our products are highly competitive. In the LED market, we compete with companies that manufacture or sell LED chips as well as those that sell LED components. Competitors continue to offer new blue, green and white LEDs with aggressive prices and improved performance. Competitive pricing pressures may accelerate the rate of decline of our average sales prices.

With the growth potential for LEDs, we may face competition from a number of new entrants in the future. In addition, new technologies could emerge or improvements could be made in existing technologies that may also reduce the demand for LEDs in certain markets.

As competition increases, in order to achieve our revenue growth objectives in the current fiscal year and beyond, we need to continue to develop new products that enable our customers to win new designs and increase market share. Additionally, we anticipate that increased competition for these designs will result in pressure to lower the selling prices of our products. Therefore, our ability to continually produce more efficient, higher brightness LEDs that meet the evolving needs of our customers at lower costs will be critical to our success. Competitors may also try to align with some of our strategic customers. This could mean lower prices for our products, reduced demand for our products and a corresponding reduction in our ability to recover development, engineering and manufacturing costs. Any of these developments could have an adverse effect on our business, results of operations or financial condition.

***If we fail to evaluate, implement and integrate strategic opportunities successfully, our business may suffer.***

From time to time we evaluate strategic opportunities available to us for product, technology or business acquisitions. For example, in March 2007 we acquired COTCO and in February 2008 we acquired LLF. If we choose to make acquisitions, we face certain risks, such as failure of the acquired business to meet our performance expectations, diversion of management attention, retention of existing customers of our current and acquired businesses, and difficulty in integrating the acquired business’s operations, personnel and financial and operating systems into our current business. For example, through our acquisitions of COTCO and LLF we acquired certain customer relationships, some of which were considered related persons (see Note 16 to our consolidated financial statements included in our Annual Report on Form 10-K for the fiscal year ended June 28, 2009), that we may not be able to successfully retain.

We may not be able to adequately address these risks or any other problems that arise from our recent or future acquisitions. Any failure to successfully evaluate strategic opportunities and address risks or other problems that arise related to any acquisition could adversely affect our business, results of operations or financial condition.

***If we are unable to effectively develop, manage and expand our distribution channels for our products, our operating results may suffer.***

We have expanded into new business channels that are different from those that we have historically operated in as we grow our business and sell LED lighting products and more LED components versus LED chips. If we are unable to effectively penetrate these new distribution channels to ensure our products are reaching the appropriate customer base, our financial results may be adversely impacted. In addition, if we successfully penetrate these new distribution channels, we cannot guarantee that customers will accept our products or that we will be able to manufacture and deliver them in the timeline established by our customers.

A substantial portion of our products are sold through distributors. We typically recognize revenue on product sold to distributors when both the item is shipped and title passes to the distributor (sell-in method). Distributors must balance the need of having enough products in stock in order to meet their customer’s needs against the risk of potential inventory obsolescence. The risks of inventory obsolescence are especially true with technological products. If our distributors do not properly anticipate demand from their customers, this could lead to distributors seeking to cancel orders or placing fewer orders with us, or otherwise make it more difficult for us to forecast future product demand.

***Our business may be adversely affected by uncertainties in the global financial markets and our, or our customers’ or suppliers’, ability to access the capital markets.***

Global financial markets continue to reflect uncertainty about global economic recovery. Given these uncertainties, there could be future disruptions in the global economy, financial markets and consumer confidence. If economic conditions deteriorate unexpectedly, our business and results of operations could be materially and adversely affected. For example, our customers, or their customers, may continue to experience difficulty obtaining financing necessary to support historical or projected purchasing patterns, which could negatively affect our results of operations.

***Our LED revenues are highly dependent on our customers’ ability to produce and sell more integrated products using our LED products.***

Because our customers generally integrate our LED products into the products that they market and sell, our LED revenues depend on getting our LED products designed into a larger number of our customers’ products and our customers’ ability to sell those products. For example, some of our current customers, as well as prospective customers, create white LED components using our blue LEDs, in combination with phosphors. Sales of blue LED chips are highly dependent upon our customers’ ability to procure efficient phosphors, develop high quality and highly efficient white LED components and gain access to the necessary intellectual property rights. Even if our customers are able to develop competitive white LED components using our blue LED chips, there can be no assurance that our customers will be successful in the marketplace.

We also have current and prospective customers that create lighting systems using our LED components. Sales of LED components for these applications are highly dependent upon our customers’ ability to develop high quality and highly efficient lighting products, including thermal design, optical design and power conversion. The lighting industry has traditionally not had this level of technical expertise for LED related designs, which may limit the success of our customers’ products. Even if our customers are able to develop efficient systems, there can be no assurance that our customers will be successful in the marketplace.

***As a result of our continued expansion in new markets, such as LED components and LED lighting products, our traditional customers may reduce orders.***

Through acquisitions and organic growth, we continue to expand in new markets, such as LED components and LED lighting products. In these new markets, some of our current customers may now perceive us as a competitor. In response, our customers may reduce their orders for our products. This reduction in orders could occur faster than our sales growth in these new markets, which could adversely affect our business, results of operations or financial condition.

***Our operating results are substantially dependent on the development and acceptance of new products.***

Our future success may depend on our ability to develop new and lower cost solutions for existing and new markets and for customers to accept those solutions. We must introduce new products in a timely and cost-effective manner, and we must secure production orders for those products from our customers. The development of new products is a highly complex process, and we historically have experienced delays in completing the development and introduction of new products. The successful development and introduction of these products depends on a number of factors, including the following:

- achievement of technology breakthroughs required to make commercially viable devices;
- the accuracy of our predictions for market requirements and evolving standards;
- acceptance of our new product designs;
- acceptance of new technology in certain markets;
- the availability of qualified research and development personnel;
- our timely completion of product designs and development;
- our ability to expand sales and influence key customers to adopt our products;
- our ability to develop repeatable processes to manufacture new products in sufficient quantities and at competitive costs for commercial sales;
- our ability to effectively transfer products and technology developed in one country to our manufacturing facilities in other countries;
- our customers’ ability to develop competitive products incorporating our products; and
- acceptance of our customers’ products by the market.

If any of these or other factors becomes problematic, we may not be able to develop and introduce these new products in a timely or cost-effective manner.

***Variations in our production yields could impact our ability to reduce costs and could cause our margins to decline and our operating results to suffer.***

All of our products are manufactured using technologies that are highly complex. The number of usable items, or yield, from our production processes may fluctuate as a result of many factors, including but not limited to the following:

- variability in our process repeatability and control;
- contamination of the manufacturing environment;
- equipment failure, power outages, system failures or variations in the manufacturing process;
- lack of consistency and adequate quality and quantity of piece parts and other raw materials, and other bill of materials items;
- losses from broken wafers, inventory shrinkage or human errors;
- defects in production processes (including system assembly) either within our facilities or at our subcontractors; and
- any transitions or changes in our production process, planned or unplanned.

In the past, we have experienced difficulties in achieving acceptable yields on new products, which has adversely affected our operating results. We may experience similar problems in the future, and we cannot predict when they may occur or their severity.

In addition, our ability to convert volume manufacturing to larger diameter substrates can be an important factor in allowing for a more cost effective manufacturing process. If we are unable to make this transition in a timely or cost effective manner, our results could be negatively impacted.

In some instances, we may offer products for future delivery at prices based on planned yield improvements or increased cost efficiencies from other production advances. Failure to achieve these planned improvements or advances could significantly affect our margins and operating results.

### Litigation could adversely affect our operating results and financial condition.

We are often involved in patent infringement litigation as described in Note 13, “Commitments and Contingencies,” to our consolidated financial statements included in Item 8 of our Annual Report on Form 10-K for the fiscal year ended June 28, 2009. Defending against existing and potential litigation will likely require significant attention and resources and, regardless of the outcome, result in significant legal expenses, which could adversely affect our results unless covered by insurance or recovered from third parties. If our defenses are ultimately unsuccessful, or if we are unable to achieve a favorable resolution, we could be liable for damage awards that could materially adversely affect our results of operations and financial condition.

Where necessary, we may initiate litigation to enforce our patent or other intellectual property rights. Any such litigation may require us to spend a substantial amount of time and money and could distract management from our day-to-day operations. Moreover, there is no assurance that we will be successful in any such litigation.

***Our business may be impaired by claims that we, or our customers, infringe intellectual property rights of others.***

Vigorous protection and pursuit of intellectual property rights characterize our industry. These traits have resulted in significant and often protracted and expensive litigation. Litigation to determine the validity of patents or claims by third parties of infringement of patents or other intellectual property rights could result in significant legal expense and divert the efforts of our technical personnel and management, even if the litigation results in a determination favorable to us. In the event of an adverse result in such litigation, we could be required to:

- pay substantial damages;
- indemnify our customers;
- stop the manufacture, use and sale of products found to be infringing;
- incur asset impairment charges;
- discontinue the use of processes found to be infringing;
- expend significant resources to develop non-infringing products or processes; or
- obtain a license to use third party technology.

There can be no assurance that third parties will not attempt to assert infringement claims against us, or our customers, with respect to our products. In addition, our customers may face infringement claims directed to the customer’s products that incorporate our products, and an adverse result could impair the customer’s demand for our products. We have also promised certain of our customers that we will indemnify them in the event they are sued by our competitors for infringement claims directed to the products we supply. Under these indemnification obligations we may be responsible for future payments to resolve infringement claims against them. From time to time we receive correspondence asserting that our products or processes are or may be infringing patents or other intellectual property rights of others. If we believe the assertions may have merit or in other appropriate circumstances, we take steps to seek to obtain a license or to avoid the infringement. However, we cannot predict whether a license will be available; that we would find the terms of any license offered acceptable; or that we would be able to develop an alternative solution. Failure to obtain a necessary license or develop an alternative solution could cause us to incur substantial liabilities and costs and to suspend the manufacture of affected products.

### There are limitations on our ability to protect our intellectual property.

Our intellectual property position is based in part on patents owned by us and patents exclusively licensed to us. We intend to continue to file patent applications in the future, where appropriate, and to pursue such applications with U.S. and foreign patent authorities.

However, our existing patents are subject to expiration and we cannot be sure that additional patents will be issued on any new applications around the covered technology or that our existing or future patents will not be successfully contested by third parties. Also, since issuance of a valid patent does not prevent other companies from using alternative, non-infringing technology, we cannot be sure that any of our patents, or patents issued to others and licensed to us, will provide significant commercial protection, especially as new competitors enter the market.

In addition to patent protection, we also rely on trade secrets and other non-patented proprietary information relating to our product development and manufacturing activities. We try to protect this information through appropriate efforts to maintain its secrecy, including requiring employees and third parties to sign confidentiality agreements. We cannot be sure that these efforts will be successful or that the confidentiality agreements will not be breached. We also cannot be sure that we would have adequate remedies for any breach of such agreements or other misappropriation of our trade secrets, or that our trade secrets and proprietary know-how will not otherwise become known or be independently discovered by others.

***If our products fail to perform or fail to meet customer requirements or expectations, we could incur significant additional costs, including costs associated with the recall of those items.***

The manufacture of our products involves highly complex processes. Our customers specify quality, performance and reliability standards that we must meet. If our products do not meet these standards, we may be required to replace or rework the products. In some cases, our products may contain undetected defects or flaws that only become evident after shipment. Even if our products meet standard specifications, our customers may attempt to use our products in applications they were not designed for or in products that were not designed or manufactured properly, resulting in product failures and creating customer satisfaction issues.

We have experienced product quality, performance or reliability problems from time to time and defects or failures may occur in the future. If failures or defects occur, we may need to recall our products. These recalls could result in significant losses due to:

- costs associated with the removal, collection and destruction of the product recalled;
- payments made to replace recalled product;
- a rise in warranty expense and costs associated with customer support;
- the write down or destruction of existing inventory subject to the recall;
- lost sales due to the unavailability of product for a period of time;
- delays, cancellations or rescheduling of orders for our products; or
- increased product returns.

We also may be the target of product liability lawsuits, and could suffer losses from a significant product liability judgment against us if the use of our products at issue is determined to have caused injury. A significant product recall or product liability case could also result in adverse publicity, damage to our reputation, and a loss of customer confidence in our products.

***Our operations in foreign countries, including China and other Asian countries, expose us to certain risks inherent in doing business internationally, which may adversely affect our business, results of operations or financial condition.***

As a result of acquisitions and organic growth, we have operations, manufacturing facilities and subcontract arrangements in foreign countries that expose us to certain risks. For example, fluctuations in exchange rates may affect our revenues, expenses and results of operations as well as the value of our assets and liabilities as reflected in our financial statements. We are also subject to other types of risks, including the following:

- protection of intellectual property and trade secrets;
- tariffs, customs and other barriers to importing/exporting materials and products in a cost effective and timely manner;
- timing and availability of export licenses;
- rising labor costs;
- disruptions in or inadequate infrastructure of the foreign countries where we operate;
- difficulties in accounts receivable collections;
- difficulties in staffing and managing international operations;
- the burden of complying with foreign and international laws and treaties; and
- the burden of complying with and changes in international taxation policies.

In some instances, we have been provided and may continue to receive competing incentives from foreign governments to encourage our investment in certain countries, regions, or areas outside of the United States. In particular, we have received and may continue to receive such incentives in connection with our operations in China, as the Chinese national and local governments seek to encourage the development of the technology industry in China. Government incentives may include tax rebates, reduced tax rates, favorable lending policies and other measures, some or all of which may be available to us due to our foreign operations. Any of these incentives could be reduced or eliminated by governmental authorities at any time. Any reduction or elimination of incentives currently provided to our operations could adversely affect our business and results of operations.

In addition, abrupt political change, terrorist activity and armed conflict pose a risk of general economic disruption in affected countries, which could result in an adverse effect on our business and results of operations.

### We are subject to risks related to international purchases and sales.

We expect that revenue from international sales will continue to represent the majority of our total revenue. We also purchase a portion of the materials included in our products from overseas sources. As a result, our international sales and purchases are subject to numerous U.S. and foreign laws and regulations, including, without limitation, tariffs, trade barriers, regulations relating to import-export control, technology transfer restrictions, the International Traffic in Arms Regulation promulgated under the Arms Export Control Act, the Foreign Corrupt Practices Act and the anti-boycott provisions of the U.S. Export Administration Act. If we fail to comply with these laws and regulations, we could be liable for administrative, civil or criminal liabilities, and in the extreme case, we could be suspended or debarred from government contracts or our export privileges could be suspended, which could have a material adverse effect on our business.

International sales and purchases are also subject to a variety of other risks, including risks arising from currency fluctuations, collection issues and taxes. Our international sales are subject to variability as our selling prices become less competitive in countries with currencies that are declining in value against the U.S. Dollar and more competitive in countries with currencies that are increasing in value against the U.S. Dollar. In addition, our international purchases can become more expensive if the U.S. Dollar weakens against the foreign currencies in which we are billed.

We have not entered into any foreign currency derivative financial instruments; however, we may choose to do so in the future in an effort to manage or hedge our foreign exchange rate risk.

***We depend on a limited number of customers for a substantial portion of our revenues, and the loss of, or a significant reduction in purchases by, one or more of these customers could adversely affect our operating results.***

We receive a significant amount of our revenues from a limited number of customers. For example, in fiscal 2009, two customers, Seoul Semiconductor Co., Ltd. and Arrow Electronics, Inc. individually accounted for more than 10% of our net revenue, for a combined total of 24% of our total net revenue. Sales to these and most of our other large customers are made on a purchase order basis, which does not generally require any long-term customer commitments. Therefore, these customers may alter their past purchasing behavior with little or no notice to us for various reasons, including: developing their own product solutions; choosing to purchase product from our competitors; or experiencing a reduction in their market share in the markets for which they purchase our products. If our customers alter their past (or expected) purchasing behavior, or if we encounter any problems collecting amounts due from them, our financial condition and results of operations could be negatively impacted.

***We rely on a few key sole source and limited source suppliers, and are subject to high price volatility on certain commodity inputs.***

We depend on a number of sole source and limited source suppliers for certain raw materials, components, services and equipment used in manufacturing our products, including key materials and equipment used in critical stages of our manufacturing processes. Although alternative sources generally exist for these items, qualification of many of these alternative sources could take up to six months or longer. Where possible, we attempt to identify and qualify alternative sources for our sole and limited source suppliers.

We generally purchase these sole or limited source items with purchase orders, and we have limited guaranteed supply arrangements with such suppliers. We do not control the time and resources that these suppliers devote to our business, and we cannot be sure that these suppliers will perform their obligations to us. In the past, we have experienced decreases in our production yields when suppliers have varied from previously agreed upon specifications that have impacted our cost of sales.

Additionally, the inability of our suppliers to access capital efficiently could cause disruptions in their businesses, thereby negatively impacting ours. This risk may increase if the general economic downturn negatively affects key suppliers or a significant number of our other suppliers. Any delay in product delivery or other interruption or variation in supply from these suppliers could prevent us from meeting commercial demand for our products. If we were to lose key suppliers, our key suppliers were unable to support our demand for any reason or we were unable to identify and qualify alternative suppliers, our manufacturing operations could be interrupted or hampered significantly.

We rely on arrangements with independent shipping companies, such as Federal Express and United Parcel Service, for the delivery of our products from vendors and to customers in both the United States and abroad. The failure or inability of these shipping companies to deliver products, or the unavailability of their shipping services, even temporarily, could have a material adverse effect on our business. We may also be adversely affected by an increase in freight surcharges due to rising fuel costs and added security.

In our fabrication process we consume a number of precious metals and other commodities, which are subject to high price volatility. Our operating margins could be significantly affected if we are not able to anticipate price changes correctly, or if we are not able to pass along price increases to our customers.

***Changes in our effective tax rate may have an adverse effect on our results of operations.***

Our future effective tax rates may be adversely affected by a number of factors including:

- changes in government administrations, such as the Presidency and Congress of the U.S. as well as in the states and countries in which we operate;
- changes in tax laws or interpretation of such tax laws and changes in generally accepted accounting principles;
- the jurisdiction in which profits are determined to be earned and taxed;
- the resolution of issues arising from tax audits with various authorities;
- changes in the valuation of our deferred tax assets and liabilities;
- adjustments to estimated taxes upon finalization of various tax returns;
- increases in expenses not deductible for tax purposes, including write-offs of acquired in-process research and development and impairment of goodwill in connection with acquisitions;
- changes in available tax credits;
- the recognition and measurement of uncertain tax positions;
- the lack of sufficient excess tax benefits (credits) in our additional paid in capital (“APIC”) pool in situations where our realized tax deductions for certain stock-based compensation awards (such as non-qualified stock options and restricted stock) are less than those originally anticipated; and
- the repatriation of non-U.S. earnings for which we have not previously provided for U.S. taxes, or any changes in legislation that may result in these earnings being taxed within the U.S., regardless of our decision regarding repatriation of funds.

For example, current proposals have been made by various U.S. governmental bodies to change the U.S. tax laws that include, among other things, limiting U.S. tax deductions for expenses related to un-repatriated foreign-source income and modifying the U.S. foreign tax credit rules. Although the scope of the proposed changes is unclear, it is possible that these or other changes in U.S. tax laws could increase our U.S. income tax liability and adversely affect our profitability. At this time, we cannot determine the timing that the proposed changes, if enacted, are to become effective.

Any significant increase in our future effective tax rates could adversely impact net income for future periods. In addition, the determination of our income tax provision requires complex estimations, significant judgments and significant knowledge and experience concerning the applicable tax laws. To the extent our income tax liability materially differs from our income tax provisions and accruals due to factors, including the above, which were not anticipated at the time we estimated our tax provision, our net income or cash flows could be adversely affected.

***If government agencies discontinue or curtail their funding for our research and development programs, our business may suffer.***

Changes in federal budget priorities could adversely affect our contract revenue. Historically, government agencies have funded a significant portion of our research and development activities. When the government changes budget priorities, such as in times of war or financial crisis, our funding has the risk of being redirected to other programs. Government contracts are also subject to the risk that the government agency may not appropriate and allocate all funding contemplated by the contract. In addition, our government contracts generally permit the contracting authority to terminate the contracts for the convenience of the government. The full value of the contracts would not be realized if they were prematurely terminated. Furthermore, we may be unable to incur sufficient allowable costs to generate the full estimated contract values and there is some risk that any technologies developed under these contracts may not have commercial value. If government funding is discontinued or reduced, our ability to develop or enhance products could be limited, and our business, results of operations and financial condition could be adversely affected.

***Our failure to comply with applicable environmental laws and regulations worldwide could harm our business and results of operations.***

The manufacturing, assembling and testing of our products require the use of hazardous materials that are subject to a broad array of environmental, health and safety laws and regulations. Our failure to comply with any of these applicable laws or regulations could result in:

- regulatory penalties, fines and legal liabilities;
- suspension of production;
- alteration of our fabrication, assembly and test processes; and
- curtailment of our operations or sales.

In addition, our failure to manage the use, transportation, emission, discharge, storage, recycling or disposal of hazardous materials could subject us to increased costs or future liabilities. Existing and future environmental laws and regulations could also require us to acquire pollution abatement or remediation equipment, modify our product designs or incur other expenses associated with such laws and regulations. Many new materials that we are evaluating for use in our operations may be subject to regulation under existing or future environmental laws and regulations that may restrict our use of one or more of such materials in our manufacturing, assembly and test processes or products. Any of these restrictions could harm our business and results of operations by increasing our expenses or requiring us to alter our manufacturing processes.

***In order to compete, we must attract, motivate and retain key employees, and our failure to do so could harm our results of operations.***

In order to compete, we must attract, motivate and retain executives and other key employees, including those in managerial, technical, sales, marketing and support positions. Hiring and retaining qualified executives, scientists, engineers, technical staff and sales personnel are critical to our business, and competition for experienced employees in our industry can be intense. To help attract, motivate and retain key employees, we use stock-based compensation awards such as non-qualified stock options and restricted stock. If the value of such stock awards does not appreciate, as measured by the performance of the price of our common stock, or if our share-based compensation otherwise ceases to be viewed as a valuable benefit, our ability to attract, retain and motivate employees could be weakened, which could harm our business and results of operations.

***We are exposed to fluctuations in the market value of our investment portfolio and in interest rates, and therefore, impairment of our investments or lower investment income could harm our earnings.***

We are exposed to market value and the inherent interest rate risk related to our investment portfolio. We have historically invested portions of our available cash in fixed interest rate securities such as high-grade corporate debt, commercial paper, government securities and other fixed interest rate investments. The primary objective of our investments is to preserve principal and we only acquire investments rated “AAA.” However, our investments are not all FDIC insured and may lose value and/or become illiquid regardless of their rating; in addition, declines in underlying interest rates will have a negative impact on the income generated from our investments, which could materially adversely affect our results of operations.

***We may be required to record a significant charge to earnings if our goodwill or amortizable intangible assets become impaired.***

We are required under generally accepted accounting principles to review our amortizable intangible assets and investments in equity interests for impairment when events or changes in circumstances indicate the carrying value may not be recoverable. Goodwill is required to be tested for impairment at least annually. Factors that may be considered a change in circumstances indicating that the carrying value of our amortizable intangible assets or goodwill may not be recoverable include a decline in stock price and market capitalization and slower growth rates in our industry. We may be required to record a significant charge to earnings in our consolidated financial statements during the period in which any impairment of our amortizable intangible assets or goodwill is determined to exist. This could adversely impact our results of operations.

### Catastrophic events may disrupt our business.

A disruption or failure of our systems or operations in the event of a natural disaster, health pandemic, such as an influenza outbreak within our workforce, or man-made catastrophic event could cause delays in completing sales, continuing production or performing other critical functions of our business, especially in the case of our single site for SiC wafer and LED fabrication. A catastrophic event that results in the destruction or disruption to our supply chain or any of our critical business or information technology systems could severely affect our ability to conduct normal business operations and, as a result, our operating results could be adversely affected.

***Our results of operations could vary as a result of the methods, estimates and judgments that we use in applying our accounting policies, including changes in the accounting regulations to be applied.***

The methods, estimates and judgments that we use in applying our accounting policies have a significant impact on our results of operations (see “Critical Accounting Policies and Estimates” in our Management’s Discussion and Analysis of Financial Condition and Results of Operations included in Item 7 of our Annual Report on Form 10-K for the fiscal year ended June 28, 2009). Such methods, estimates and judgments are, by their nature, subject to substantial risks, uncertainties and assumptions, and factors may arise over time that lead us to change our methods, estimates and judgments. Changes in those methods, estimates and judgments could significantly affect our results of operations.

Likewise, our results of operations may be impacted due to changes in the accounting rules to be applied, such as the increased use of fair value measurement rules and the potential requirement that U.S. registrants prepare financial statements in accordance with International Financial Reporting Standards.

### Our stock price may be volatile.

Historically, our common stock has experienced substantial price volatility, particularly as a result of significant fluctuations in our revenue, earnings and margins over the past few years and variations between our actual financial results and the published expectations of analysts. If our future operating results or margins are below the expectations of stock market analysts or our investors, our stock price will likely decline.

Speculation in the press or investment community about our strategic position, financial condition, results of operations, or significant transactions can also cause changes in our stock price. In particular, speculation around our market opportunities for energy efficient lighting may have dramatic effects on our stock price, especially as various government agencies announce their planned investments in energy efficient technology, including lighting.

Filed Jan 20, 2010.
Source: SEC EDGAR, the filing index for accession 0001193125-10-008654. Last ingested by Listed: Nov 14, 2026, 23:45 ET. No prices; not investment advice.
