# Gentherm Inc: Form 10-K for the period ended Dec 31, 2010

- Company: [Gentherm Inc](/companies/thrm.md) (CIK 903129)
- Form: 10-K
- Filed: 2011-02-17
- Accepted by EDGAR: Feb 17, 2011, 21:57 ET
- Period: 2010-12-31
- Accession: 0001193125-11-039213
- Inline XBRL: no
- Main document: https://www.sec.gov/Archives/edgar/data/903129/000119312511039213/d10k.htm
- All documents and exhibits: https://www.sec.gov/Archives/edgar/data/903129/000119312511039213/

## Business

As filed, 37,926 characters.

### General

Amerigon Incorporated (“Amerigon,” “we,” the “Company” or the “registrant”) designs, develops and markets products based on our advanced, proprietary, efficient thermoelectric device (“TED”) technologies for a wide range of global markets and heating and cooling applications. Our current principal product is our proprietary Climate Control Seat™ (“CCS™” or “CCS”) which we sell to automobile and light truck original equipment manufacturers or their tier one suppliers. The CCS provides year-round comfort to automotive seat occupants by producing both active heating and cooling. As of December 2010, we have shipped approximately 6.9 million units of our CCS product to customers since we first began shipping CCS units in 2000. Our CCS product is currently offered as an optional or standard feature on 54 automobile models produced by Ford Motor Company, General Motors, Toyota Motor Corporation, Nissan, Tata Motors, Ltd. and Hyundai. Tata Motors, Ltd. features CCS on its Jaguar and Land Rover luxury brands which it acquired from Ford Motor Company in 2008.

Since the initial introduction of CCS we have introduced new designs that incorporated improvements in electrical efficiency, size, weight, and noise and are more versatile. These include our Micro Thermal Module™ (“MTM™” or “MTM”) technology and our CCS II configuration. Further improvements in engineering design are currently in development and are expected to be introduced on future vehicle models.

In 2008, we launched a heated and ventilated only variant of the CCS (“HV”). This product works in a similar fashion to our CCS, only there is no active cooling capability and no TED. In the cooling mode, the vent only system will use the ambient cabin air to provide a degree of cooling comfort to the seat occupant. In the heating mode, the vent only system will be supplemented with more traditional resistive heating elements. This system has a lower price and is targeted to certain lower cost vehicle models and certain geographical markets.

In 2009, we were awarded a contract to manufacture an automotive heated and cooled cup holder for the 2011 Dodge Charger. The cup holder has been designed to be packaged in multiple configurations to accommodate different console environments. In addition to requiring low power consumption, it has proven automotive grade, ruggedness, high reliability and drink retention features. The cup holder has two cup positions that provide for separate temperature settings in each holder that allow the driver and passenger to individually control the heating or cooling of their respective beverages. The technology used in the cup holder is similar to that of the CCS system. The cup holder was launched at the end of the final quarter of 2010.

In September 2010, we launched our actively heated and cooled suite of luxury mattresses. The mattresses provide individual controls via two wireless remotes to actively heat and cool each side of the mattress independently. We sell the mattresses through U.S. based specialty mattress retailer, Mattress Firm, Incorporated (“Mattress Firm”). Mattress Firm has over 580 retail stores located across 22 states. The new mattresses are sold under the brand name YuMe™ and are available in King and Queen sizes.

The Company is also engaged in a program to improve the efficiency of TEDs and to develop, market and distribute new products based on this technology.

On September 1, 2009, our subsidiary, BSST LLC (“BSST”) entered into a partnership agreement with 5N Plus Inc., a Canadian corporation specializing in production of high-purity metals (“5N Plus”), to form ZT Plus. ZT Plus’ objective is the development and testing of new materials that show increased thermoelectric efficiency. BSST purchased 5N Plus’ 50% ownership of ZT Plus in March 2010 and BSST is now the 100% owner of ZT Plus, LLC (“ZT Plus”).

On October 1, 2010 we formed Amerigon Europe, GmbH (“Amerigon Europe”) and opened a technical support office in Augsburg, Germany, to provide design initiatives, product development, application engineering and prototype builds in support of European sales.

On December 31, 2010, we purchased the ownership interests in BSST then held by Dr. Lon E. Bell (“Bell”). Prior to such acquisition, Bell owned a 15% interest in BSST. As a result of such acquisition, BSST is now a wholly-owned subsidiary of Amerigon.

### Corporate Information

We were incorporated in 1991 and focus our efforts on developing advanced TED technologies and applications including our CCS product. At the present time, the CCS is our only high volume product, however, we expect that our heated and cooled cup holder and heated and cooled mattress will begin to noticeably contribute to our product revenues during 2011. We are presently working on developing products that utilize our proprietary TED technology in other non-CCS applications.

We are incorporated under the laws of the State of Michigan. Our internet website address is www.amerigon.com. Our annual or transition reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended (the “Exchange Act”) are made available free of charge through our website as soon as reasonably practicable after we electronically file them with or furnish them to the Securities and Exchange Commission.

### Business Strategy

Our strategy is to become the leading provider of TED based products through strategic relationships with automobile manufacturers and market leaders in other industries and their suppliers. We have, however, expanded our product line to non-TED based products where we believe our technologies and core competencies give us a distinct advantage and our customers are interested in a wider range of product choices. An example of this is the heated and ventilated only variant of the CCS. Our strategy includes the following key elements:

- Developing TED based products in partnership with capable sectoral partners using our proprietary developed, highly efficient TEDs;
- Further improving the efficiency of our TED systems on a proprietary basis through continued research and development including research in TED materials;
- Entering new markets with our existing and future TED proprietary technology;
- Continuing to encourage automobile manufacturers and their tier one suppliers to offer our CCS and heated and cooled cup holder products;
- Continuing to improve our CCS and heated and cooled cup holder technologies for cost, performance, efficiency and packageability;
- Increasing global penetration with automotive companies by offering a variety of heated, cooled and ventilated products;
- Penetrate the bedding market with our heated and cooled mattress with our retail partner, Mattress Firm, in the United States and with other partners in other geographic regions; and
- Continuing to expand our intellectual property.

### Products

#### Thermoelectric device (TED)

Our current and future planned products are primarily based upon our internally developed advanced TED technology. A TED is a solid state circuit that has the capability to produce both a hot and cold thermal condition. This is known as the Peltier effect. The advantages of advanced TEDs over conventional compressed gas systems is that they are environmentally friendly, less complex as they have no moving parts and are compact and light weight. Traditional TEDs are not widely utilized in the global product marketplace because they are inherently inefficient. We have worked for the past ten years developing innovations that improve TED efficiency. We currently hold 20 U.S. patents related to these innovations and have 27 additional U.S. patents pending. Our progress to date has been to improve TED efficiency by an approximate factor of two. We believe that an improvement factor of four is required for a number of practical commercial applications. This improvement is likely to require the development of advanced materials and manufacturing processes to produce those materials in sufficient quantities. Advanced TED materials are currently being researched by a number of entities, and we have developed strategic relationships with several of these. During 2008, we participated in a significant breakthrough. With our support, a scientist at The Ohio State University developed a new efficient TED material having certain desirable properties at high temperatures. This and other materials we are working with are not ready for commercial applications; however, our subsidiary, ZT Plus, was formed for the express purpose of completing the development of advanced materials and creating innovative manufacturing capabilities to produce the materials in volume, and in a cost-efficient manner. We currently hold three U.S. patents and have 10 additional U.S. patents pending, related to TED materials.

TEDs also have a capability known as the Seebeck effect that is reciprocal to the Peltier effect. In this process thermal energy, such as the waste heat from an automobile exhaust, can be converted into electrical power. As with the Peltier effect, traditionally designed TEDs lack the efficiency for practical application. Our research and development efforts seek to improve the TED efficiency of this process. ZT Plus’ current primary focus is on TED materials suited for these types of devices.

Although we believe the prospects of our advanced TED technology are very promising, there are no assurances as to when the efficiency gains required can be achieved, if at all. Additionally, it can not be certain that our proposed products based upon our advanced TED designs would gain acceptance by potential customers. While we have been encouraged by some developments in advancing TED capabilities, there have also been set backs and problems that we continue to try to overcome.

#### Climate Control Seat

Our CCS product utilizes exclusive patented technology, obtained through license and internal development, for a variable temperature seat climate control system to enhance the comfort of vehicle passengers. We have additional patents pending for further improvements to the CCS and TED technology. Our CCS product uses one or more TEDs, which generate heating or cooling depending upon the direction of the current applied to the device.

A TED is the heart of a compact heat pump built by us for use in our CCS product. Air is forced through the heat pump and thermally conditioned in response to electronic switch input from the seat occupant. The conditioned air circulates by a specially designed fan through ducts in the seat cushion and seat back, so that the seat surface can be heated or cooled. Each seat has individual electronic controls to adjust the level of heating or cooling. Our CCS product substantially improves comfort compared with conventional air conditioners by focusing the cooling directly on the passenger through the seat, rather than waiting until ambient air cools the seat surface behind the passenger.

Since each vehicle model’s seats are different, we must tailor the CCS components to meet each seat design. Since we first began to develop the CCS in the late 1990’s, we have supplied prototype seats containing our CCS product to virtually every major automobile manufacturer and seat supplier. If a manufacturer wishes to integrate our CCS product into a seat, it provides us with automotive seats to be modified so that we can install a unit in a prototype. The seat is then returned to the manufacturer for evaluation and testing. If a manufacturer accepts our CCS product, a program can then be launched for a particular model on a production basis, but it normally takes two to three years from the time a manufacturer decides to include our CCS product in a vehicle model to actual volume production for that vehicle. During this process, we derive minimal funding from prototype sales but generally obtain no significant revenue until mass production begins. We have active development programs on many vehicle platforms, although we cannot be certain that our CCS product will be implemented on any of these vehicles.

#### Heated and Ventilated Seat

We also sell a heated and ventilated only variant of the CCS. This product works in a similar fashion to our CCS, only there is no active cooling capability and no TED. In the cooling mode, the vent only system will use the ambient cabin air to provide a degree of cooling comfort to the seat occupant. In the heating mode, the vent only system will be supplemented with more traditional resistive heating elements. This system has a lower price and is targeted to certain lower cost vehicle models, certain geographical markets and customers who prefer heated and ventilated product. By offering this product, we give our customers the opportunity to purchase a wider range of climate control products from us across the price spectrum.

#### Heated and Cooled Cup Holder

During 2010 we launched our first proprietary heated and cooled cup holder. The heated and cooled cup holder represents an adaptation of the technology found in our CCS, including the use of a TED and other key elements. Much like the CCS, the dual cup holder provides separate temperature settings in each holder allowing the driver and passenger to individually maintain a heated or cooled beverage. The cup holder requires low power consumption and incorporates proven automotive grade ruggedness, reliability and drink retention features. The first vehicle to feature the heated and cooled cup holder will be the 2011 Dodge Charger. We anticipate that at least one additional vehicle will adopt this product in 2011.

#### Heated and Cooled Mattress

During 2010, we launched our heated and cooled mattress which incorporates our proprietary Climate Control Sleep System™ (“CCSS”) technology. The mattress is sold on an exclusive basis in the United States by our retail partner, Mattress Firm, under its YuMe™ brand. Mattress Firm has over 580 retail stores located across 22 states. The CCSS represents an adaptation of the technology found in our CCS system, but for a non-automotive market. The YuMe bed combines the latest design in mattress comfort as well as our temperature control technology to deliver the ultimate sleeping experience. Similar to the CCS, the YuMe utilizes four MTMs which direct warmed or cooled air to a special air distribution layer of the mattress though special air ducts connecting the mattress to the foundation. Two separate temperature zones have their own heat or cool settings for a personalized microclimate sleep environment. There are five available settings in each of the heat and cool modes as well as an ambient setting. The bed can be controlled using either the Master Control Unit (“MCU”) or one of two remotes provided for each zone.

### Research and Development

Our research and development activities are an essential component of our efforts to develop new innovative products for introduction in the marketplace. Our research and development activities are expensed as incurred. These expenses include direct expenses for wages, materials and services associated with the development of our products net of reimbursements from customers. Research and development expenses do not include any portion of general and administrative expenses.

We continue to do additional research and development to advance the design of our existing products with the goal of making them less complex, easier to package and less expensive to manufacture and install. There can be no assurance that this development program will result in improved products.

Research and development expenses for our CCS and heated and cooled cup holder products include not only development of next generation technologies but also application engineering (meaning engineering to adapt CCS components to meet the design criteria of a particular vehicle’s seat or console and electrical system since vehicle seats and consoles are not all the same and each has different configuration requirements). Any related reimbursements for the costs incurred in this adaptation process are accounted for as a reduction of research and development expense.

Our research and development subsidiary, BSST, was formed to develop much more efficient thermoelectric systems and products using its improved technology. ZT Plus, a subsidiary of BSST, focuses on the development and testing of new materials that show increased thermoelectric efficiency. The limitation on applications for thermoelectric systems has been their relatively poor efficiency. We believe that, through a combination of proprietary methods for improving thermoelectric efficiency and improved thermoelectric materials (such as those being developed by ZT Plus), there are substantial prospects for the design and development of innovative thermoelectric systems in applications outside of our present product line.

We are constructing test systems to demonstrate performance and to develop a comprehensive knowledge of the technology as applied to various potential large market sectors beyond automotive seating, including other automotive applications, stationary temperature management, aerospace and defense, individual comfort, waste heat harvesting and primary power generation. Our objective is for our unique technology to occupy an important place in the value chain of a new class of solid state energy conversion systems that replace existing electromechanical devices in the above mentioned applications.

In 2009, BSST successfully completed the fourth phase of its Automotive Waste Heat Recovery Program and as a result was awarded a Phase 5 Program by the U.S. Department of Energy (“DOE”). BSST leads a development team that includes Visteon Corporation, BMW of North America, Ford Motor Company, Marlow Industries, the DOE’s National Renewable Energy Laboratory and Jet Propulsion Laboratory/California Institute of Technology. The objective of this five phase program is to demonstrate a viable thermoelectric-based vehicle waste heat recovery and power generation system that will improve the efficiency of vehicles powered by internal combustion engines. In Phase 1 of the program the team established a vehicle system architecture for a BMW series 5 engine and conducted a comprehensive analysis to determine the technical and commercial viability of its power generation concept. In Phase 2, the team built and tested prototype key subsystems including a thermoelectric power generator, electronic power control system and exhaust gas heat exchanger. In Phase 3, the team integrated and operated the subsystems together in a bench test environment. The fourth phase involved constructing a full prototype to be installed in a vehicle. Under Phase 5 of the program we will be delivering two additional prototype power generators for installation in vehicles manufactured by BMW Group and The Ford Motor Company for further evaluation and testing. Seventy five percent of the total cost of this program is paid for with Federal funds, while selected project team members, including BSST, bear the remaining cost. Through December 31, 2010, we have received a total of $7.2 million in program funding from the DOE since the program began in 2005. We expect Phase 5 to be completed during 2011.

During 2008, BSST was included in a DOE sponsored program to develop a highly-efficient thermoelectric heating and cooling system for automobiles that is intended to substantially reduce energy consumption, engine load and ultimately greenhouse gas emissions. The goal of the 36-month project is to create a zonal heating and cooling system for automobiles that heats or cools the vehicle occupants, rather than the entire cabin and its components, thereby reducing the energy consumed by existing heating/cooling systems by one third. Ford Motor Company was selected to lead the project with partners including Visteon, the DOE’s National Energy Renewable Laboratory and Ohio State University, along with BSST. BSST’s role is to design and develop the thermoelectric core of the heating and cooling system. The entire $8.4 million project, which began in the fourth quarter of 2009, is being performed on a cost share basis with the DOE paying $4.2 million and the partners sharing in a matching $4.2 million. Program funding under this program was $588,000 and $44,000 during 2010 and 2009, respectively.

The net amounts spent for research and development activities in 2010, 2009 and 2008 were $9,653,000, $5,994,000 and $6,783,000, respectively. Because of changing levels of research and development activity, our research and development expenses fluctuate from period to period. Also included in research and development are expenses associated with the research and development activities of BSST of $5,936,000, $3,908,000 and $3,665,000 for 2010, 2009 and 2008, respectively. BSST’s expenses are net of reimbursement for customer funded research and development of $2,269,000, $2,103,000 and $2,462,000 for 2010, 2009 and 2008, respectively.

### Marketing, Customers and Sales

We are primarily a second-tier supplier to automobile and truck manufacturers for the CCS, HV and heated and cooled cup holder and to a retailer for the YuMe™ mattress. As such, we focus our marketing efforts on automobile and truck manufacturers and their first-tier suppliers. In 2009, we also began selling CCS units to an after-market distributor/installer in small quantities. We have not marketed, and do not expect to market, directly to consumers. For CCS and HV products, our strategy has been to convince the major automobile companies that our products represent an attractive feature that will meet with consumer acceptance and have favorable economics, including high profitability, to the manufacturers. If convinced, the manufacturers then direct us to work with their seat supplier to incorporate our CCS product into future seat designs who then become our direct customers. These customers include Johnson Controls, Inc. (“JCI”), Lear Corporation (“Lear”), Bridgewater Interiors, LLC (“Bridgewater”), NHK Spring Company, Ltd (“NHK”), Marubeni Vehicle Corporation (“Marubeni”), Dymos Incorporated (“Dymos”), Faurecia NHK Kyushu Co. Ltd (“Faurecia NHK”), Faurecia Wuhan Auto Seating (“Faurecia Wuhan”), Tacle Seating USA (“Tacle”) and Magna Seating of America, Inc. (“Magna”). We also market directly to these and other major domestic and foreign automotive seat suppliers. The number of CCS products we sell is affected by the levels of new vehicle sales and the general business conditions in the automotive industry.

During 2009, particularly in the first half of the year, our product revenues were adversely affected by a significant decline in worldwide automotive production levels. During 2009, worldwide light vehicle production declined by 13% to approximately 57 million vehicles. This drop was even more significant during the first half of 2009, during which period sales declined by 29% as compared to the prior year. Our product revenues are primarily focused on vehicle production in North America and the Japan/Korea region. During 2009, on a combined basis, vehicle production for these regions declined by 28% as compared to the prior year. This decline has been largely precipitated by a decrease in the sales of light vehicles attributable to the global credit crisis and resulting global economic slowdown. During 2009, our revenue levels were 4% lower compared to the prior year despite the much more significant reduction in worldwide light vehicle production. We were able to maintain revenue levels by introducing CCS on several new vehicle platforms that were launched during the year and increasing installation rates of the CCS on existing light vehicle platforms. During 2010, global automotive production continued the recovery that began during the second half of 2009. Global automotive production during 2010 was up 23% from 2009 and was up by 39% and 19% in North America and the Japan/Korea regions, respectively. We expect that global automotive production will again increase during 2011, but at a much slower rate. Global economic factors affecting automotive production are difficult to predict and there can be no assurance of future automotive production at any level.

Our CCS (including the MTM and CCS II variations), HV and heated and cooled cup holder products are offered as optional or standard features on the following vehicle models:

| Manufacturer | Model | Product | Year Launched(1) |
| --- | --- | --- | --- |
| Ford Motor Company | Lincoln MKZ(5) | MTM | 2005 |
|  | Lincoln MKX(3)(5) | MTM | 2006 |
|  | Lincoln MKS(5) | MTM | 2008 |
|  | Lincoln MKT(2)(5) | MTM | 2009 |
|  | Lincoln Navigator(3)(5) | MTM | 1999 |
|  | Ford Expedition | MTM | 2002 |
|  | Ford Taurus | MTM | 2009 |
|  | Ford F150 | MTM | 2008 |
|  | Ford F250 | MTM | 2010 |
|  | Ford Explorer | MTM | 2010 |
| Chrysler | Dodge Charger | CUP | 2010 |
| General Motors | Cadillac Escalade | MTM | 2006 |
|  | Cadillac Escalade ESV(3) | MTM | 2006 |
|  | Cadillac Escalade EXT | MTM | 2006 |
|  | GMC Yukon | MTM | 2008 |
|  | GMC Yukon XL | MTM | 2008 |
|  | GMC Yukon Denali | MTM | 2008 |
|  | GMC Sierra Denali | MTM | 2008 |
|  | Chevrolet Suburban | MTM | 2008 |
|  | Chevrolet Tahoe | MTM | 2008 |
|  | Chevrolet Avalanche | MTM | 2008 |
|  | Cadillac DTS(3) | MTM | 2003 |
|  | Buick Lucerne | MTM | 2005 |
| Toyota Motor Corporation | Lexus LS 460(2)(3) | CCS II | 2000 |
|  | Lexus LX 570 | CCS II | 2007 |
|  | Toyota Celsior(4) | CCS II | 2000 |
|  | Toyota Century(4) | CCS | 2005 |
|  | Toyota Crown Majesta(2) | CCS II | 2008 |
| Nissan | Infiniti M35/45(5) | CCS II | 2005 |
|  | Infiniti Q45 | CCS II | 2002 |
|  | Infiniti FX35/50 | CCS II | 2008 |
|  | Infiniti G Convertible | CCS II | 2009 |
|  | Infiniti QX56 | CCS II | 2010 |
|  | Nissan Teana(4) | HV | 2008 |
|  | Nissan Maxima | CCS II | 2008 |
|  | Nissan Fuga(4) | CCS II | 2005 |
|  | Nissan Cima(4) | CCS II | 2002 |
|  | Nissan 370Z Roadster | CCS II | 2009 |
|  | Nissan Patrol | CCS II | 2010 |
| Hyundai | Equus(2)(4) | CCS | 2003 |
|  | Genesis | CCS II | 2007 |
|  | Veracruz | HV | 2010 |
|  | Tucson | HV | 2010 |
| KIA | Mohave | HV | 2009 |
|  | Borrego | HV | 2009 |
|  | Opris | CCS II | 2009 |
|  | Sportage | HV | 2010 |
|  | Optima | HV | 2010 |
|  | Sonata | HV | 2010 |
| Jaguar | XJ(2) | MTM | 2007 |
|  | XF | MTM | 2007 |
|  | XK | MTM | 2009 |
| Land Rover | Range Rover(2) | MTM | 2006 |

7

(1) Represents the year in which the current model or a predecessor model first offered CCS as an option.

(2) Vehicle is equipped with CCS in both front and rear seat positions.

(3) Model is a redesigned successor to a model which previously offered CCS as an option.

(4) Vehicle is produced for the Asian market only.

(5) Vehicle includes CCS as a standard feature.

For our most recent fiscal year, our revenues from sales to our three largest customers, Lear, Bridgewater and JCI were $38,328,000, $17,394,000, and $14,533,000, respectively, representing 34%, 15%, and 13% of our total revenues, respectively. The loss of any one of these customers is likely to have a material adverse impact on our business.

Our product revenues for each of the past three years were divided among automotive original equipment manufacturers (“OEMs”) as follows:

| Manufacturer | 2010 | 2009 | 2008 |
| --- | ---: | ---: | ---: |
| Ford Motor Company | 32% | 39% | 26% |
| General Motors | 22 | 22 | 25 |
| Nissan | 17 | 16 | 21 |
| Hyundai | 16 | 10 | 3 |
| Toyota Motor Corporation | 5 | 7 | 18 |
| Jaguar/Land Rover | 8 | 6 | 7 |
| Total | 100% | 100% | 100% |

In 2003, we formed our wholly owned subsidiary, Amerigon Asia Pacific, Inc., a Japanese company (“Amerigon Asia Pacific”), to provide administrative support and engineering activities related to our customers based in Japan.

In 2010, we formed our wholly owned subsidiary, Amerigon Europe GmbH, a German company (“Amerigon Europe”), to open a technical support office in Augsburg, Germany, to provide design initiatives, product development, application engineering and prototype builds in support of European sales.

### Outsourcing, Contractors and Suppliers

We completely outsource production of our products to lower-cost countries to be price competitive and expand our market beyond the luxury vehicle segment. We currently have contract manufacturing relationships with several suppliers who have manufacturing locations in China, Mexico and Japan.

In March 2001, we entered into a manufacturing and supply agreement with Tokyo-based Ferrotec Corporation (“Ferrotec”). In exchange for a $2 million fee, we granted Ferrotec the exclusive right to manufacture CCS products for ultimate distribution to our customers within certain Asian countries, subject to Ferrotec’s obligation to be competitive in certain key supplier attributes. The region includes China, Japan, Taiwan, Korea, India, Thailand, Vietnam, Malaysia, Indonesia and the Philippines. The initial term of the agreement began April 1, 2001 and expires on April 1, 2011.

During 2008, the market price for Tellurium, a key raw material necessary for the manufacture of the TEDs used in our products, increased substantially. As a result, we renegotiated pricing with certain of our suppliers and our net income was negatively affected. The market price for Tellurium moderated during 2008 and 2009, however, during late 2010 and early 2011 it has again increased. This increase may require further renegotiations with our customers and suppliers. It is also possible that our customers will ask for price concessions if the market price of Tellurium falls back to its historical average.

Our ability to manufacture and market our products successfully is dependent on relationships with third party suppliers, especially those contract manufacturers described above. We rely on various vendors and suppliers for the components of our products and procure these components through purchase orders, with no guaranteed supply arrangements. Certain components, including TEDs, are only available from a limited number of suppliers in the world. The loss of any significant supplier, in the absence of a timely and satisfactory alternative arrangement, or an inability to obtain essential components on reasonable terms or at all, could materially adversely affect our business, operations and cash flows. Our business and operations could also be materially adversely affected by delays in deliveries from our suppliers.

### Proprietary Rights and Patents

We have adopted a policy of seeking to obtain, where practical, the exclusive rights to use technology related to our products through patents or licenses for proprietary technologies or processes. In addition to our efforts to apply for patents for our own internally developed devices and processes, we have historically acquired developed technologies through licenses and joint development contracts in order to optimize our expenditure of capital and time. We have sought to adapt and commercialize such technologies in automotive products which were suitable for mass production. We also developed technologies or furthered the development of acquired technologies through internal research and development efforts by our engineers.

We currently have a license arrangement related to our CCS product. Feher Design, Inc. (“Feher”) has granted to us an exclusive worldwide license to use specific CCS technologies covered by three U.S. patents held by Feher. Two of these three licensed patents expired on November 17, 2008 and October 18, 2009. The other patent will expire on March 14, 2011. In addition, we jointly own two U.S. patents and four Japanese patents with Honda Motor Co.

### Competition

The automotive components and systems business is highly competitive. During 2008, one of our competitors, W.E.T. Automotive Systems AG (“WET”), introduced a heated and cooled automotive seat system very similar to ours on a GM vehicle platform. In addition, certain vehicle manufacturers have, for some time, offered options on certain models that combine heated seats with circulation of ambient air or cooled air from the car’s air conditioning system. It is possible that our competitors will be able to expand or modify their current products to more directly compete with our CCS system. We believe that there are other potential competitors that are working to develop systems for both active heating and cooling of automotive car seats.

On November 17, 2009 we filed a patent infringement lawsuit against WET. The complaint was filed in the United States District Court for the Central District of California and alleges that WET infringes four patents we either own or license. On February 8, 2010, WET filed a motion to dismiss the case or transfer it to the Eastern District of Michigan. Also, on February 8, 2010, WET filed a patent infringement lawsuit against us in the Eastern District of Michigan, alleging infringement of eight patents allegedly owned or licensed by WET. On April 5, 2010, based on a determination by the California court that WET was not subject to personal jurisdiction in California, the California court dismissed our lawsuit in California. We answered the lawsuit filed by WET in Michigan, and, on May 6, 2010, asserted counterclaims alleging that WET infringes five patents we either own or license. The Michigan court has not yet set a date for trial, but we expect that a trial would not occur until 2012 or 2013.

On April 23, 2010, WET filed another lawsuit in the Eastern District of Michigan, requesting a ruling that WET does not infringe two of our patents that were not involved in the earlier Michigan lawsuit. We and WET took steps to dismiss the lawsuit without prejudice on August 18, 2010.

On December 10, 2010, we filed another patent infringement lawsuit against WET alleging that it infringes two additional patents that Amerigon owns or licenses, neither of which was involved in any earlier lawsuit. WET has not yet answered.

The various lawsuits involving WET described above seek injunctive relief and/or monetary damages for infringement and other related claims.

No assurances can be given that our patent infringement claims against WET will be successful or that we will be successful in defending WET’s patent infringement claims against us. In the event that we are unsuccessful in defending against the lawsuit by WET, our business could be negatively impacted.

We may experience additional competition directly from automobile manufacturers or other major suppliers, most of which have the capability to manufacture competing products. Many of our existing and potential competitors have considerably greater financial and other resources than we do, including, but not limited to, an established customer base, greater research and development capability, established manufacturing capability and greater marketing and sales resources. We believe that our products will compete successfully on the basis of performance, quality, and price.

### Financial Information About Industry Segments and Geographic Areas

Our business segment and geographic areas information is incorporated herein by reference to Note 11 of our consolidated financial statements and related financial information indexed on page F-1 of this report.

### Employees

As of December 31, 2010, Amerigon and its subsidiaries employed a total of 93 individuals, including eight at Amerigon Asia Pacific in Japan and three at Amerigon Europe GmgH in Europe. Amerigon also has retained the services of 14 outside contractors. None of our employees is subject to collective bargaining agreements. We consider our employee relations to be satisfactory.

### Executive Officers of the Registrant

Our current executive officers are as follows:

**Daniel R. Coker**, 58, was appointed President and Chief Executive Officer in March 2003. He was appointed to the Board of Directors in February, 2007. Mr. Coker also served on the Company’s Board of Directors from 2003 to 2004. Additional information concerning Mr. Coker can be found above under the heading “Board of Directors.”

**Barry G. Steele**, 40, was appointed Vice President Finance and Chief Financial Officer in 2004 and Secretary and Treasurer in 2005. Prior to joining Amerigon, Mr. Steele worked since 1997 in a number of senior financial management positions, including Chief Financial Officer for Advanced Accessory Systems, LLC, a global supplier of specialty accessories to the automotive industry. Prior to 1997, Mr. Steele worked in the public accounting profession. Mr. Steele received a bachelor’s degree from Hillsdale College in 1992.

**James L. Mertes**, 58, has served as Vice President of Quality and Operations since 1994. He joined the Company in 1993 as Vice President of Quality. Prior to 1993, Mr. Mertes was Director of Quality at TRW Sensor Operations, a unit of TRW Inc.

**Daniel J. Pace**, 59, has served as Vice President of Sales and Marketing since 2003. He joined the Company in 1996 as National Sales Manager. Prior to 1996, Mr. Pace was Program Manager at Leckie & Associates, a Michigan based manufacturers’ representative agency.

**Stephen C. Davis,** 57, was appointed Vice-President of Engineering and Product Development in May, 2010. He joined the Company in 2009 as the Senior Vice President, Operations of BSST. Prior to that date, he worked for Visteon Corporation from 2005 as Director of Climate Control Systems. Prior to 2005, Mr. Davis held other senior engineering positions at Visteon Corporation and Ford Motor Company.

Officers of the Company serve at the pleasure of the Board of Directors.

## Risk factors

As filed, 34,597 characters.

### Forward-Looking Statements

*This Report contains forward-looking statements within the meaning of the “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995. Reference is made in particular to the description of our plans and objectives for future operations, assumptions underlying such plans and objectives and other forward-looking statements included in this section, “Item 1 Business,” “Item 7 Management’s Discussion and Analysis of Financial Condition and Results of Operations,” and in other places in this Report. Such statements may be identified by the use of forward-looking terminology such as “may,” “will,” “expect,” “believe,” “estimate,” “anticipate,” “intend,” “continue,” or similar terms, variations of such terms or the negative of such terms. Such statements are based on management’s current expectations and are subject to a number of factors and uncertainties that could cause actual results to differ materially from those described in the forward-looking statements. We expressly disclaim any obligation or undertaking to release publicly any updates or revisions to any forward-looking statements contained herein to reflect any change in our expectations with regard thereto or any change in events, conditions or circumstances on which any such statement is based. Factors that could cause such results to differ materially from those described in the forward-looking statements include those set forth below.*

### Risks Relating to our Business

*The automotive industry, which represents our primary market, has significantly declined over the past few years and may continue to decline causing our product revenues to decline*

Demand for our products is directly related to automotive vehicle production. Recently, automotive sales and production have been significantly and adversely affected by general economic and industry conditions, labor relations issues, fuel prices, regulatory requirements, trade agreements and other factors. Although general automotive sales in the Unites States in 2010 exceeded 2009 levels, vehicle models offering our CCS as an optional feature experienced significant production declines in 2008 and 2009. The automobile OEMs, especially those based in the United States, have recently experienced significant operating losses and are continuing to restructure their operations, which could have a material adverse impact on our future financial results. Continued declines in automotive production levels, particularly with respect to models for which we supply CCS products, would materially reduce our revenues and harm our profitability.

*We may suffer significant losses should more of our customers or any of the major automotive manufacturers declare bankruptcy either for the first time or again*

If any of our customers or any of the major automotive manufacturers files for bankruptcy protection, we face the risks of being unable to collect a significant portion of our outstanding accounts receivable and of suffering a significant loss of future revenues. In such an event, a considerable amount of the accounts receivable owed to us from our customers might not be paid. In addition, if an automotive manufacturer that incorporates our products in its vehicles were to declare bankruptcy and cease operations, our future operating profits would be significantly impacted by the significant loss of revenue. We cannot be certain that all of the automotive manufactures or our tier one customers will avoid filing for bankruptcy in the future. Some of our tier one supplier customers and some of the major automotive manufacturers declared bankruptcy in during 2009 and have emerged from bankruptcy, but there is no certainty that those entities will not declare bankruptcy again.

*We have only one commercially successful product in one industry segment and we may not be able to commercialize and market additional products to other industries*

We are currently developing advanced designs of TEDs to be used in a wide range of potential products in a number of industries, but to date we have only one commercially successful product. Although we have made significant improvements in TED technology and we believe that a number of new products have become practical at our current stage of TED advancement, additional improvements are necessary to make TED-based products commercially attractive in comparison with other technologies for the major markets in which we are targeting. These advancements are dependent on many variables including but not limited to new advanced materials becoming available and efficient and cost effective manufacturing processes for advanced TEDs and the related materials being developed. There is no certainty that any advancement in TEDs will be commercially viable.

#### We have incurred substantial operating losses since our inception and could incurr additional operating losses in future periods

Although we have reported operating income during the past six years, prior to that we incurred substantial operating losses since our inception. Furthermore, our operating income for 2009 was substantially lower than in previous years. We had operating losses of $1,554,000 in 2003, $6,168,000 in 2002, and $7,537,000 in 2001. We reported operating losses during the first and second quarters of 2009 due to the significant decline in our product revenue during those periods. As of December 31, 2010, we had accumulated deficits since inception of $28,301,000. Our accumulated deficits are attributable to the historical costs of developmental and other start-up activities, including the industrial design, development and marketing of discontinued products and a significant loss incurred on a major electric vehicle development contract. Approximately $33,000,000 of past losses arose from past efforts in electric vehicles, integrated voice technology and radar, all discontinued products as of December 31, 2000.

We have funded our financial needs from inception primarily through net proceeds received through our initial public offering as well as other equity and debt financing. At December 31, 2010, we had cash and cash equivalents of $26,584,000 and short term investments of $9,761,000. Based on our current operating plan, we believe cash and short term investments at December 31, 2010, along with the proceeds from future revenues and borrowings from our $15,000,000 revolving lines of credit will be sufficient to meet operating needs for the foreseeable future.

#### Our ability to market our products successfully depends on acceptance of our product by original equipment manufactures and consumers

We are engaged in a lengthy development process of our advanced TEDs which involves developing prototypes for proof of concept and then adapting the basic systems to actual products produced by existing manufactures of products that may use TEDs. While we currently have active development programs with various partners, no assurance can be given that our advanced TEDs will be implemented in any related products. To date, CCS is our sole high-volume commercialized product, and there is no assurance that we will be successful in marketing any additional products using TEDs.

#### Significant increases in the market prices of certain raw materials may adversely affect our business

Our products contain TEDs which contain certain raw materials that cannot generally be substituted. As an example, Tellurium is a raw material used in TEDs. If the market prices for these raw materials significantly increase, our gross profit may be adversely impacted as our suppliers pass those price increases on to us. A recent increase in the price of Tellurium is one example of the impact raw material prices could have on our business. Our suppliers passed the increase in Tellurium prices on to us and our ability to recover this increase from our customers was limited. Our business and operations could also be materially adversely affected by shortages in key raw materials.

#### The disruption or loss of relationships with vendors and suppliers for the components for our products could materially adversely affect our business

Our ability to manufacture and market our products successfully is dependent on relationships with both third party vendors and suppliers. We rely on various vendors and suppliers for the components of our products and procure these components through purchase orders, with no guaranteed supply arrangements. Certain components, including thermoelectric devices and the specially designed fans used in our CCS and HV products, are only available from a limited number of suppliers. The loss of any significant supplier, in the absence of a timely and satisfactory alternative arrangement, or an inability to obtain essential components on reasonable terms or at all, could materially adversely affect our business, operations and cash flows. Our business and operations could also be materially adversely affected by delays in deliveries from suppliers.

#### The outsourcing of production to other countries entails risks of production interruption and unexpected costs

We outsource production of our products to lower cost countries in order to be price competitive and expand our market beyond the luxury vehicle segment. Such production is currently completed by suppliers located in Nogales, Mexico, Nagoya, Japan and three cities in China: Shenzhen, Tianjin and Hangzhou. Our use of suppliers located outside of the United States entails risk of production interruption and unexpected costs due to the extended logistics.

Automobile manufacturers, in particular, demand on-time delivery of quality products, and some have required the payment of substantial financial penalties for failure to deliver components to their plants on a timely basis. Such penalties, as well as costs to avoid them, such as overtime costs and overnight air freighting of parts that normally are shipped by other less expensive means of transportation, could have a material adverse effect on our business and financial condition. Moreover, the inability to meet demand for our products on a timely basis would materially adversely affect our reputation and future commercial prospects.

#### We may not be able to persuade potential customers of the merits of our products and justify their costs to increase our sales

Because of the sophisticated nature and early stage of development of our products, we have been, and will continue to be, required to educate potential customers and demonstrate that the merits of our products justify the costs associated with such products. We have relied on, and will continue to rely on, automobile manufacturers and manufacturers in other industries and their dealer networks to market our products. The success of any such relationship will depend in part on the other party’s own competitive, marketing and strategic considerations, including the relative advantages of alternative products being developed and/or marketed by any such party. There can be no assurance that we will be able to continue to market our products successfully so as to generate meaningful product sales increases or to continue at existing sales volumes.

#### The sales cycle for our automotive products is lengthy and the lengthy cycle impedes growth in our sales

The sales cycle in the automotive components industry is lengthy and can be as long as four years or more for products that must be designed into a vehicle, because some companies take that long to design and develop a vehicle. Even when selling parts that are neither safety-critical nor highly integrated into the vehicle, there are still many stages that an automotive supply company must go through before achieving commercial sales. The sales cycle is lengthy because an automobile manufacturer must develop a high degree of assurance that the products it buys will meet customer needs, interface as easily as possible with the other parts of a vehicle and with the automobile manufacturer’s production and assembly process, and have minimal warranty, safety and service problems. As a result, from the time that a manufacturer develops a strong interest in our products, it normally will take several years before our products are available to consumers in that manufacturer’s vehicles.

In the automotive components industry, products typically proceed through five stages of research and development. Initial research on the product concept comes first, to assess its technical feasibility and economic costs and benefits. This stage often includes development of an internal prototype for the component supplier’s own evaluation. If the product appears feasible, the component supplier manufactures a functioning prototype to demonstrate and test the product’s features. These prototypes are then marketed and sold to automotive companies for testing and evaluation. If an automobile manufacturer shows interest in the product, it typically works with the component supplier to refine the product, then purchases second and subsequent generation engineering prototypes for further evaluation. Finally, the automobile manufacturer either decides to purchase the component for a production vehicle or terminates the program.

The time required to progress through these five stages to commercialization varies widely. Generally, the more a component must be integrated with other vehicle systems, the longer the process takes. Further, products that are installed by the factory usually require extra time for evaluation because other vehicle systems are affected, and a decision to introduce the product into the vehicle is not easily reversed. Because our automotive products affect other vehicle systems and is a factory-installed item, the process takes a significant amount of time to commercialization.

Other TED products that we develop are also likely to have a lengthy sales cycle. Because such technology is new and evolving, and because customers will likely require that any new product we develop pass certain feasibility and economic viability tests before committing to purchase, it is expected that any new products we develop will take some years before they are sold to customers.

*The automotive industry is subject to intense competition and our current automotive products may be rendered obsolete by future technological developments in the industry*

The automotive component industry is subject to intense competition. Virtually all of our competitors are substantially larger in size, have substantially greater financial, marketing and other resources, and have more extensive experience and records of successful operations than we do. Competitors are promoting new products that may compete with our products. Additionally, heat-only devices are readily available from our competitors at relatively low prices. Competition extends to attracting and retaining qualified technical and marketing personnel. There can be no assurance that we will successfully differentiate our products from those of our competitors, that the marketplace will consider our current or proposed products to be superior or even comparable to those of our competitors, or that we can succeed in establishing new or maintaining existing relationships with automobile manufacturers. Furthermore, no assurance can be given that competitive pressures we face will not adversely affect our financial performance.

Due to the rapid pace of technological change, as with any technology-based product, our products may even be rendered obsolete by future developments in the industry. Our competitive position would be adversely affected if we were unable to anticipate such future developments and obtain access to the new technology.

#### Any failure to protect our intellectual property could harm our business and competitive position

As of December 31, 2010, we owned 17 U.S. patents and had 26 U.S. patents pending. We also owned 23 foreign patents and had 26 foreign patent applications pending. Through our subsidiary BSST, we owned 20 U.S. patents, 27 foreign patents and had 31 U.S. patents pending and 48 foreign patents pending. Through our subsidiary ZT Plus, we owned three U.S. patents and had 10 U.S. patents pending and 18 Foreign patents pending. We also license one U.S. patent and are joint owners with Honda Motor Co. of two U.S. patents and four Japanese patents.

As of December 31, 2010, two of our issued U.S. Patents (U.S. Patent Nos. RE41,765 and 7,827,805 ) are in reexamination at the United States Patent Office. The reexamination request for U.S. Patent No. RE41,765 was filed by WET on November 17, 2010 and has not yet been granted. The reexamination request for U.S. Patent No. 7,827,805 was filed on November 12, 2010 and was granted on December 8, 2010. A first office action rejecting all of the claims in the 7,827,805 patent was issued on January 10, 2011. No assurances can be given that these patents will survive the reexamination. In the event that we are unsuccessful prosecuting these patents through reexamination, our business could be negatively impacted.

We believe that patents and proprietary rights have been and will continue to be very important in enabling us to compete. There can be no assurance that any new patents will be granted or that our or our licensors’ patents and proprietary rights will not be challenged or circumvented or will provide us with meaningful competitive advantages or that pending patent applications will issue. Furthermore, there can be no assurance that others will not independently develop similar products or will not design around any patents that have been or may be issued to our licensors or us. Failure to obtain patents in certain foreign countries may materially adversely affect our ability to compete effectively in those international markets. We hold current and future rights to licensed technology through licensing agreements requiring the payment of minimum royalties. Failure to continue with or loss of such agreements could materially and adversely affect our business.

Because of rapid technological developments in the automotive industry and the competitive nature of the market, the patent position of any component manufacturer is subject to uncertainties and may involve complex legal and factual issues. Consequently, although we either own or have licenses to certain patents, and are currently processing several additional patent applications, it is possible that no patents will issue from any pending applications or that claims allowed in any existing or future patents issued or licensed to us will be challenged, invalidated, or circumvented, or that any rights granted under such patents will not provide us adequate protection. There is an additional risk that we may be required to participate in interference proceedings to determine the priority of inventions or may be required to commence litigation to protect our rights, which could result in substantial costs.

#### Our products may conflict with patents that have been or may be granted to competitors or others

Other persons could bring legal actions against us claiming damages and seeking to enjoin manufacturing and marketing of our products for allegedly conflicting with patents held by them. Any such litigation could result in substantial cost to us and diversion of effort by our management and technical personnel. If any such actions are successful, in addition to any potential liability for damages, we could be required to obtain a license in order to continue to manufacture or market the affected products. There can be no assurance that we would prevail in any such action or that any license required under any such patent would be made available on acceptable terms, if at all. Failure to obtain needed patents, licenses or proprietary information held by others may have a material adverse effect on our business. In addition, if we become involved in litigation, it could consume a substantial portion of our time and resources. We are currently involved in litigation with a competitor, W.E.T. Automotive Systems AG, which may require a substantial commitment of time and money and divert resources from other ongoing projects. From time to time, we receive notices from third parties suggesting that our products infringe on the proprietary rights of others. While we believe that none of the claims of infringement received to date are valid, we must spend time and resources reviewing those claims and defending ourselves.

#### We rely on trade secret protection through confidentiality agreements and the agreements could be breached

We also rely on trade secrets that we seek to protect, in part, through confidentiality and non-disclosure agreements with employees, customers and other parties. There can be no assurance that these agreements will not be breached, that we would have adequate remedies for any such breach or that our trade secrets will not otherwise become known to or independently developed by competitors. To the extent that consultants, key employees or other third parties apply technological information independently developed by them or by others to our proposed projects, disputes may arise as to the proprietary rights to such information that may not be resolved in our favor. We may be involved from time to time in litigation to determine the enforceability, scope and validity of proprietary rights. Any such litigation could result in substantial cost and diversion of effort by our management and technical personnel. Additionally, with respect to licensed technology, there can be no assurance that the licensor of the technology will have the resources, financial or otherwise, or desire to defend against any challenges to the rights of such licensor to its patents.

*Our most significant customers typically reserve the right unilaterally to cancel contracts or reduce prices, and the exercise of such right could reduce or eliminate any financial benefit to us anticipated from such contract*

Automotive customers typically reserve the right unilaterally to cancel contracts completely or to require price reductions. Although they generally reimburse companies for actual out-of-pocket costs incurred with respect to the particular contract up to the point of cancellation, these reimbursements typically do not cover costs associated with acquiring general purpose assets such as facilities and capital equipment, and may be subject to negotiation and substantial delays in receipt by us. Any unilateral cancellation of, or price reduction with respect to any contract that we may obtain could reduce or eliminate any financial benefits anticipated from such contract and could have a material adverse effect on our financial condition and results of operations. To date, we have not experienced such a cancellation and no such costs have been incurred.

The third parties that contract with our subsidiary, BSST, for research and development purposes generally also reserve the right to unilaterally terminate those contracts. There can be no assurance that BSST will continue to receive the third party reimbursements it has received over the past several years.

#### Our success will depend in large part on retaining key personnel

Our success will depend to a large extent upon the continued contributions of key personnel. The loss of the services of Daniel R. Coker, our President and Chief Executive Officer, or other officers could have a material adverse effect on the success of our business. Our success will also depend, in part, upon our ability to retain qualified engineering and other technical and marketing personnel. There is significant competition for technologically qualified personnel in our business and we may not be successful in recruiting or retaining sufficient qualified personnel.

#### Our reliance on outside major contractors may impair our ability to complete certain projects and manufacture products on a timely basis

We have engaged outside contractors to perform product assembly and other production functions for us. We believe that there are other outside contractors that provide services of the kind that are used by us and that we may desire to use in the future. However, no assurance can be given that any such contractors would agree to work for us on terms acceptable to us or at all. Our inability to engage outside contractors on acceptable terms or at all would impair our ability to complete any development and/or manufacturing contracts for which outside contractors’ services may be needed. Moreover, our reliance upon third party contractors for certain production functions reduces our control over the manufacture of our products and makes us dependent in part upon such third parties to deliver our products in a timely manner, with satisfactory quality controls and on a competitive basis.

#### Our business exposes us to potential product liability risks

Our business exposes us to potential product liability risks which are inherent in the manufacturing, marketing and sale of automotive components. In particular, there are substantial warranty and liability risks associated with our products. If available, product liability insurance generally is expensive. While we presently have product liability coverage at amounts we currently consider adequate, there can be no assurance that we will be able to obtain or maintain such insurance on acceptable terms with respect to other products we may develop, or that any insurance will provide adequate protection against any potential liabilities. In the event of a successful claim against us, a lack or insufficiency of insurance coverage could have a material adverse effect on our business and operations.

*Because many of the largest automotive manufacturers are located in foreign countries, our business is subject to the risks associated with foreign sales*

Many of the world’s largest automotive manufacturers are located in foreign countries. Accordingly, our business is subject to many of the risks of international operations, including governmental controls, tariff restrictions, foreign currency fluctuations and currency control regulations. However, historically, substantially all of our sales to foreign countries have been denominated in U.S. dollars. As such, our historical net exposure to foreign currency fluctuations related to sales has not been material. No assurance can be given that future contracts will be denominated in U.S. dollars or that existing contracts will be honored by our suppliers or customers, especially with respect to our customers and suppliers whose cost structure and revenue are denominated in other currencies.

The Company began a foreign currency risk management strategy in January 2010 that includes the use of derivative financial instruments designed to protect our economic value from the possible adverse effects of currency fluctuations as it relates to payments to suppliers. There is no certainty that we will not suffer losses in connection with any derivative instruments.

#### Our use of contractors located in foreign countries will subject us to the risks of international operations

We engage contractors located in foreign countries. Accordingly, we will be subject to all of the risks inherent in international operations, including work stoppages, transportation delays and interruptions, political instability, foreign currency fluctuations, economic disruptions, the imposition of tariffs and import and export controls, changes in governmental policies and other factors which could have a material adverse effect on our business.

*The recent global economic and financial market crisis has had and may continue to have a negative effect on our business and operations.*

The recent global economic and financial market crisis has caused, among other things, a general tightening in the credit markets, lower levels of liquidity, increases in the rates of default and bankruptcy, lower consumer and business spending, and lower consumer net worth, all of which has had and may continue to have a negative effect on our business, results of operations, financial condition and liquidity. Many of our tier-one customers, their OEM customers and our suppliers have been severely affected by the recent economic turmoil, including bankruptcy. There is no certainty that our customers and suppliers will continue to be in business. The recent crisis could continue to lead to reduced demand for our products and could result in customer payment delays or defaults. Further, suppliers may not be able to supply us with needed raw materials on a timely basis, may increase prices or go out of business, which could result in our inability to meet consumer demand or affect our financial results.

Although there has been some improvement in economic conditions during 2010, the timing and nature of any recovery in the credit and financial markets remains uncertain, and there can be no assurance that market conditions will continue to improve in the near future or that our financial results will not continue to be materially and adversely affected. Such conditions make it very difficult to forecast operating results, make business decisions and identify and address material business risks. The foregoing conditions may also impact the valuation of our Federal Net Operating Loss carryforwards (“NOLs”) which are subject to impairment testing, potentially resulting in impairment charges which may be material to our financial condition or results of operations. See Note 4 of our consolidated financial statements and related financial information indexed on page F-1 of this Report for a more complete description of our NOLs.

#### Credit market developments may reduce availability under our credit agreement.

Due to the current volatile state of the credit markets, there is risk that lenders, even those with strong balance sheets and sound lending practices, could fail or refuse to honor their legal commitments and obligations under existing credit commitments, including but not limited to, extending credit up to the maximum permitted by a credit facility, allowing access to additional credit features and otherwise accessing capital and/or honoring loan commitments. If our lender fails to honor its legal commitments under our $15,000,000 credit facilities, it could be difficult in the current environment to replace our credit facility on similar terms. Although we believe that our cash reserves, access to capital markets and existing credit facility will give us the ability to satisfy our liquidity needs for at least the next 12 months, the failure of the lender under our credit facility may impact our ability to finance our operating or investing activities.

### Risks Relating to Share Ownership

*Our quarterly results may fluctuate significantly, and the relatively small average daily trading volume of our Common Stock may adversely affect the liquidity of our Common Stock and stock price*

Our quarterly operating results may fluctuate significantly in the future due to such factors as acceptance of our product by automotive manufacturers and consumers, timing of our product introductions, availability and pricing of components from third parties, competition, timing of orders, foreign currency exchange rates, technological changes, resources spent on litigation activities and economic conditions generally. Broad market fluctuations in the stock markets can adversely affect the market price of our Common Stock. In addition, failure to meet or exceed analysts’ expectations of financial performance may result in immediate and significant price and volume fluctuations in our Common Stock.

Historically, the average daily trading volume of our Common Stock has been relatively low as compared to the total number of outstanding shares of Common Stock. Without a significantly larger number of shares made available for trading by the public, our Common Stock is less liquid than stocks with more trading activity, and as a result, trading prices of our Common Stock may significantly fluctuate and certain institutional investors may be unwilling to invest in such a thinly traded security.

*We have anti-takeover defenses that could make it more difficult for a third party to acquire a majority of our outstanding voting stock.*

Our Board of Directors (our “Board”) has the authority to issue up to 4,991,000 shares of Preferred Stock and to determine the price, rights (including conversion rights), preferences and privileges of those shares without any further vote or action by the shareholders. Consistent with this authority, in January, 2009 our Board adopted a Shareholder Rights Plan (the “Rights Plan”) in which one purchase right was distributed as a dividend on each share of Company Common Stock held of record as of the close of business on February 10, 2009 (the “Rights”). If exercisable, each Right will entitle its holder to purchase from the Company one one-thousandth of a share of a newly created Series B Preferred Stock of the Company for $20.00 (the “Purchase Price”). The Rights will become exercisable if any person or group becomes the beneficial owner of 15% or more of the Company’s Common Stock or has commenced a tender or exchange offer which, if consummated, would result in any person or group becoming the beneficial owner of 15% or more of the Company’s Common Stock. If any person or group becomes the beneficial owner of 15% or more of the Company’s Common Stock, each right will entitle its holder, other than the acquiring person, to purchase a number of shares of the Company’s or the acquiror’s Common Stock having a value of twice the Purchase Price. The Rights are deemed attached to the certificates representing outstanding shares of Common Stock. The Rights Plan is designed to deter coercive takeover tactics and to prevent an acquiror from gaining control of the Company without offering a fair price to all of the Company’s shareholders; however, the existence of the Rights Plan and the rights of holders of any other shares of preferred stock that may be issued in the future, could have the effect of making it more difficult for a third party to acquire a majority of our outstanding voting stock.

#### We do not anticipate paying dividends on our Common Stock

We have never paid any cash dividends on our Common Stock and do not anticipate paying dividends in the near future.

## Properties

As filed, 1,274 characters.

We lease our corporate headquarters of approximately 12,100 square feet in Farmington Hills, Michigan (although located in Farmington Hills, such property has a Northville, Michigan mailing address) and we lease research and development facilities of approximately 33,000 square feet in Irwindale, California and 10,100 square feet in Azusa, California. BSST’s operations are primarily located at the Irwindale, California location and the Azusa, California location, which is the headquarters of its subsidiary, ZT Plus, LLC. Our Michigan lease expires August 31, 2014, the Irwindale lease expires March 31, 2016 and the Azusa lease expires September 30, 2012. We have the right to terminate the California lease on September 30, 2013. The current monthly rent of the Michigan lease, including rent and operating expense allocations, is approximately $17,000. The current monthly rent of the Irwindale lease, including rent, property taxes and insurance, is approximately $48,000. The current monthly rent of the Azusa lease is approximately $9,000. We also lease office space in Japan, Germany, Korea and China. The combined cost of these leases is approximately $34,000 per month. We believe that these facilities are adequate and suitable for their present requirements.

## Legal proceedings

As filed, 1,900 characters.

We are subject to litigation from time to time in the ordinary course of our business, but there is no current material pending litigation to which we are a party except for the patent lawsuit described below and no material legal proceeding was terminated, settled or otherwise resolved during the fourth quarter of the fiscal year ended December 31, 2010.

On November 17, 2009 we filed a patent infringement lawsuit against WET. The complaint was filed in the United States District Court for the Central District of California, alleging that WET infringes four patents we either own or license. On February 8, 2010, WET filed a motion to dismiss the case or transfer it to the Eastern District of Michigan. Also, on February 8, 2010, WET filed a patent infringement lawsuit against us in the Eastern District of Michigan, alleging infringement of eight patents allegedly owned or licensed by WET. On April 5, 2010, based on a determination by the California court that WET was not subject to personal jurisdiction in California, the California court dismissed our lawsuit in California. We answered the lawsuit filed by WET in Michigan, and, on May 6, 2010, asserted counterclaims alleging that WET infringes five patents we either own or license. The Michigan court has not yet set a date for trial, but we expect that a trial would not occur until 2012 or 2013.

On April 23, 2010, WET filed another lawsuit in the Eastern District of Michigan, requesting a ruling that WET does not infringe two of our patents that were not involved in the earlier Michigan lawsuit. We and WET took steps to dismiss the lawsuit without prejudice on August 18, 2010.

On December 10, 2010, we filed another patent infringement lawsuit against WET alleging that it infringes two additional patents that Amerigon owns or licenses, neither of which was involved in any earlier lawsuit. W.E.T. has not yet answered.

## Management's discussion and analysis

As filed, 32,111 characters.

*The following discussion and analysis should be read in conjunction with, and is qualified in its entirety by, our financial statements (and notes related thereto) and other more detailed financial information appearing elsewhere in this report. Consequently, you should read the following discussion and analysis of our financial condition and results of operations together with such financial statements and other financial data included elsewhere in this report. Some of the information contained in this discussion and analysis or set forth elsewhere in this report, including information with respect to our plans and strategy for our business, includes forward-looking statements that involve risks and uncertainties. You should review the “Risk Factors” section of this report for a discussion of important factors that could cause actual results to differ materially from the results described in or implied by the forward-looking statements contained in the following discussion and analysis. See also “Forward-Looking Statements” in Item 1A of this report.*

### Overview

We design, develop and market proprietary high technology electronic systems for sale to automobile and truck original equipment manufacturers. In 2010, we completed our eleventh full year of producing and selling our Climate Control Seat™ (“CCS™”) product, which provides year-round comfort by providing both active heating and cooling to seat occupants. Since we started commercial production, we have shipped approximately 6,900,000 units of our CCS product. We primarily sell directly to seat manufacturers, including JCI, Lear, Bridgewater, NHK, Marubeni, Dymos, Faurecia NHK, Faurecia Wuhan, Tacle, and Magna. These customers in turn sell our product, as a component of an entire seat or seating system, to automobiles manufactured by Ford Motor Company, General Motors, Toyota Motor Corporation Nissan and Tata Motors, Ltd. Tata Motors, Ltd. features CCS on its Jaguar and Land Rover luxury brands which it acquired from Ford Motor Company in 2008. We also have sold directly to Hyundai and we sell a small amount of after-market product.

We operate as a Tier II supplier to the auto industry. Inherent in this market are costs and commitments well in advance of the receipt of orders (and resulting revenues) from customers. This is due in part to automotive manufacturers requiring the coordination and testing of proposed new components and sub-systems. Revenues from these expenditures may not be realized for two to three years as the manufacturers tend to group new components and enhancements into annual or every two to three year vehicle model introductions.

During 2010, we began selling two additional products, including a heated and cooled cup holder and a heated and cooled mattress. Revenues for these products represented a small percentage of our 2010 product revenues.

During 2009, particularly in the first half of the year, our product revenues were adversely affected by a significant decline in worldwide automotive production levels. During 2009, worldwide light vehicle production declined by 13% to approximately 57 million vehicles. This drop was even more significant during the first half 2009, during which period sales declined by 29% as compared to the prior year. Our product revenues are primarily derived from vehicle production in North America and the Japan/Korea region. During 2009, on a combined basis, vehicle production for these regions declined by 28% as compared to the prior year. This decline has been largely precipitated by a decrease in the sales of light vehicles attributable to the global credit crisis and resulting global economic slowdown. During 2009, our revenue levels were 4% lower compared to the prior year despite the much more significant reduction in worldwide light vehicle production. We were able to maintain revenue levels by introducing CCS on several new vehicle platforms that were launched during the year and increasing installation rates of the CCS on existing light vehicle platforms. During 2010, global automotive production continued the recovery that began during the second half of 2009. Global automotive production during 2010 was up 23% from 2009 and was up by 39% and 19% in North America and the Japan/Korea regions, respectively. We expect that global automotive production will again increase during 2011 but at a much slower rate. Global economic factors affecting automotive production are difficult to predict and there can be no assurance of future automotive production at any level.

### Critical Accounting Policies

The discussion and analysis of our financial condition and results of operations are based upon our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States of America. The preparation of these consolidated financial statements requires us to make estimates and judgments that affect the reported amount of assets and liabilities, revenues and expenses, and related disclosures at the date of our financial statements. Actual results may differ from these estimates under different assumptions or conditions. These estimates and assumptions include, but are not limited to:

- Warranty reserves,
- Litigation reserves,
- Allowances for doubtful accounts,
- Income taxes,
- Inventory reserves,
- Stock compensation and
- Patents.

#### Accrued Warranty Costs

We do not offer our customers explicit warranty terms; however, we do honor warranty claims for defective products. We have secured errors and omissions insurance which provides certain coverage for defects in our product designs; however, we do not maintain a product recall insurance policy. Provision for estimated future cost of warranty for product delivered is recorded when revenue is recognized. While we believe our warranty reserve is adequate and that the judgment applied is appropriate, such estimates could differ materially from what will actually transpire in the future. The warranty policy is reviewed by management annually. Based on historical information available to the Company and claims filed to date, which have been minimal, the warranty accrual is periodically adjusted to reflect management’s best estimate of future claims.

#### Litigation Reserves

We record estimated future costs related to new or ongoing litigation. These estimates include costs associated with attorney fees and potential claims and assessments less any amounts recoverable under insurance policies.

#### Income Taxes

We record income tax expense using the liability method which specifies that deferred tax assets and liabilities be measured each year based on the difference between the financial statement and tax bases of assets and liabilities at the applicable enacted Federal and state tax rates. A valuation allowance is provided for a portion of our net deferred tax assets when we consider it more likely than not that the asset will not be realized. At December 31, 2010 and 2009, a valuation allowance has been provided for an estimated portion of our NOLs generated prior to a 1999 change in control, as defined by the internal revenue code, which limits our ability to utilize those NOLs. At our currently expected rate of future taxable income, we expect to utilize the NOLs not subject to this limitation during 2011. If future annual taxable income were to be significantly less than current and projected levels, there is a risk that some of our NOLs not already provided for by the valuation allowance would expire prior to utilization. We do not expect significant differences between our taxable income and our book earnings before income taxes.

We recognize the financial statement benefit of a tax position only after determining that the relevant tax authority would more likely than not sustain the position following an audit. For tax positions meeting the more-likely-than-not threshold, the amount recognized in the financial statements is the largest benefit that has a greater than 50 percent likelihood of being realized upon ultimate settlement with the relevant tax authority.

#### Stock Based Compensation

We account for all share-based payments to employees, including grants of employee stock options, as compensation expense based upon the fair value on the date of grant. We determine fair value of such awards using the Black-Scholes option pricing model. The Black-Scholes option pricing model incorporates certain assumptions, such as risk-free interest rate, expected volatility, expected dividend yield and expected life of options, in order to arrive at a fair value estimate. Expected volatilities are based on the average of the historical volatility of the Company’s common stock and that of an index of companies in our industry group. Since the Company has little historical data to help evaluate the expected lives of options, we considered several other factors in developing this assumption including the average holding period of outstanding options, their remaining terms and the cycle of our long range business plan. The risk free interest rate is based upon quoted market yields for United States Treasury debt securities. The expected dividend yield is based upon the Company’s history of having never issued a dividend and management’s current expectation of future action surrounding dividends. We believe that the assumptions selected by management are reasonable; however, significant changes could materially impact the results of the calculation of fair value.

#### Patent Costs

Our business strategy largely centers on designing products based upon internally developed and licensed technology. When possible, we protect these technologies with patents. We capitalize the costs of purchasing, developing and filing new patent applications. These costs consist of legal and filing fees. These costs are then amortized on a straight-line basis over their estimated economic useful life which is generally 17 years. We periodically review the recoverability and remaining life of our capitalized patents based upon market conditions, competitive technologies and our projected business plans. Changes in these conditions could materially impact the carrying value for our capitalized patents.

### Results of Operations Year Ended December 31, 2010 Compared to Year Ended December 31, 2009

*Product Revenues.* Product revenues for 2010 were $112,403,000 compared with product revenues of $60,925,000 for 2009, an increase of $51,478,000, or 84%. Higher sales were primarily the result of a much improved automotive marketplace causing higher vehicle production levels on existing programs, new model introductions and the full year effect of the addition of a rear seat option on certain existing programs. Modest initial shipments of our heated and cooled mattress, which was launched at the very end of the third quarter 2010, and our heated and cooled up holder which was launched at the end of the third quarter, also contributed to the higher product revenue levels. Unit shipments of CCS were 1,597,000 during 2010 compared with unit shipments of 874,000 during 2009, an increase of 723,000 units or 83%. The higher product revenues and unit volumes on existing programs were due to a partial recovery from historically low vehicle production levels experienced during 2009, during which, there was a significant decline in the overall automotive market. Automotive production and sales volumes, impacted by slowing worldwide economic activity and decreasing availability of consumer credit during 2009, were significantly higher during 2010 as compared to 2009. Production of light vehicles in North America increased by 39% to 11.9 million during 2010 from 8.6 million during 2009. New vehicles equipped with CCS and launched during 2010 included the Ford F250, Ford Explorer, Infiniti QX56, Nissan Patrol, Hyundai Veracruz, Hyundai Tucson, KIA Sportage, KIA Optima and KIA Sonata. Several programs that were new in 2009 including the Ford Taurus, Infiniti G Convertible, Nissan 370Z Roadster, KIA Mohave, KIA Borrego, and KIA Opris and rear seat applications on two existing programs including the Jaguar XJ and Land Rover Range Rover had higher revenue during 2010 due to the impact of shipments being made during the full year.

*Cost of Sales.* Cost of sales increased to $79,664,000 during 2010 from $45,166,000 during 2009. This increase of $34,548,000, or 77%, is attributable to higher sales volumes offset partially by a higher gross profit percentage. The gross profit percentage during 2010 was 29% and was 26% during 2009. This increase is primarily attributable to a favorable change in the mix of products sold, lower raw material costs, and a greater coverage of fixed cost at the higher volume levels. TED’s, which represent the key component of the CCS system, contain the metal Tellurium (“Te”). During 2010, we had a lower cost for Te. We have implemented changes to the manufacturing process for our TEDs which enable us to use less Te per component. These changes currently impact a portion of our TED purchases; over time we expect to be able to extend the program to the balance of our TED purchases. During late 2010 and early 2011, the market for Tellurium has again begun to increase. This could lead to further increases in process from our TED suppliers. We have limited ability to pass on raw material cost increases to our customers.

*Net Research and Development Expenses.* Net research and development expenses increased to $9,653,000 during 2010 from $5,994,000 during 2009. This $3,659,000, or 61%, increase was primarily due to the advanced TE materials program by BSST’s now wholly-owned ZT Plus subsidiary. When we formed ZT Plus, certain ongoing expenses associated with our advanced TE materials program were transferred to the new partnership and were partially funded by our partner, 5N Plus. These activities, and the associated cost, have been expanded since that formation date. Effective March 1, 2010, BSST purchased 5N Plus’ 50% ownership and since that date is providing 100% of the necessary funding. We are also in the process of developing new products, such as the heated and cooled mattress, heated and cooled cup holder and cold storage box and developing improvements in our current CCS system. The costs associated with these projects were greater during 2010 primarily due to some of the projects reaching the commercial launch phase of development. Partially offsetting these increases were higher research and development reimbursements which fluctuate from period to period due to the timing of different phases of the various underlying projects.

We classify development and prototype costs and related reimbursements as research and development. This is consistent with accounting standards applied in the automotive industry. Depreciation costs for tooling are included in cost of sales.

*Selling, General and Administrative Expenses.* Selling, general and administrative expenses increased to $10,955,000 during 2010 from $8,857,000 during 2009. This $2,098,000, or 24%, increase is primarily due to the opening of our European office, expenses associated with the planned opening of an office in China and an increase in the number of sales and marketing employees. We have increased our marketing resources in order to support increased activities in South Korea, Europe and China. Our selling, general and administrative expenses for 2010 also include $607,000 in legal fees associated with an ongoing product liability lawsuit with our competitor WET. We had recorded a contingent liability for these fees at the end of 2009 totaling $500,000. During the fourth quarter 2010, we increased this accrual by $307,000 reflecting incurred costs in excess of the original $500,000 liability plus an additional $300,000 representing estimated fees to be incurred during 2011.

*Income Tax Expense.* We recorded an income tax expense of $2,921,000 during 2010. This amount included an adjustment to our deferred tax asset valuation allowance which lowered income tax expense by $1,375,000. This adjustment reflects a change in the amount of Federal Net Operating Losses that are limited due to a 1999 change in control. Our effective tax rate, prior to this adjustment was 35% on pre-tax income of $12,279,000. Our current income tax expense is expected to be substantially offset by our net operating loss carry forwards. Therefore, we did not have a significant cash outlay for income taxes during 2010. During 2009, we recorded an income tax expense totaling $325,000 reflecting a 53% effective tax rate on pre-tax income of $609,000. This higher effective tax rate is attributable to the effect of certain expenses, such as stock option expenses for Incentive Stock Options and meals and entertainment expenses that are not deductible for tax purposes. As our pretax earnings approach break even, as it did during 2009, these expenses have a much greater impact on the effective rate causing it to be higher.

### Results of Operations Year Ended December 31, 2009 Compared to Year Ended December 31, 2008

*Product Revenues.* Product revenues for 2009 were $60,925,000 compared with product revenues of $63,613,000 for 2008, a decrease of $2,688,000, or 4%. Lower sales resulting from lower volumes on existing programs, primarily during the first half of 2009, were partially offset by higher sales from new model introductions. Unit shipments were 874,000 units for 2009 compared with unit shipments of 931,000 in 2008, a decrease of 57,000 units or 6%. The lower product revenues and unit volumes on existing programs were due to a significant decline in the overall automotive market. Automotive production and sales volumes, impacted by slowing worldwide economic activity and decreasing availability of consumer credit, were significantly lower during 2009 as compared to 2008. In North America, one of our most important markets, the seasonally adjusted annual rate (“SAAR”) for vehicle sales was 10.4 million during the 2009, down 21% from 13.2 million during 2008. Vehicle production levels have been reduced even further as OEMs cut production in order to reduce new vehicle inventory levels. During 2009, production of light vehicles in North America decreased by 32% to 8.6 million from 12.6 million during 2008. New vehicles equipped with CCS and launched during 2009 included the Lincoln MKT, Ford Taurus, Jaguar XK, Nissan 370Z Roadster, Infiniti G Convertible, KIA Mohave and KIA Borrego. Two of our existing programs, the Jaguar XJ and Land Rover Range Rover, began offering CCS in the rear seating position for the first time during the third quarter 2009. Several programs that were new in 2008 including the Ford F150 Pickup, Chevrolet Suburban, Chevrolet Tahoe, Chevrolet Avalanche, GMC Yukon, GMC Yukon XL, GMC Yukon Denali, GMC Sierra Pickup, Toyota Crown Majesta and the Nissan Maxima, had higher revenue during 2009 due to the impact of shipments being made during the full year.

*Cost of Sales.* Cost of sales increased to $45,166,000 in 2009 from $45,086,000 in 2008. This increase of $80,000, or 0.2%, is attributable to lower gross profit percentage partially offset by lower volumes. The gross profit percentage during 2009 was 26% and was 29% during 2008. This decrease is primarily attributable to higher raw material costs, an unfavorable change in the mix of products sold which favored programs having a lower gross margin percentage during 2009 compared with 2008 and lower coverage of fixed cost at the lower volume levels. Higher costs for Te represent the most significant portion of our higher raw material cost. During the early months of 2008, the market for Te experienced a significant increase. The average price of a kilogram of Te in 2007 was approximately $100 and increased to a peak of $286 in April 2008. We do not purchase Te directly, but have periodically agreed to price increases from our TED suppliers as a result of the increase in their Te costs. Existing Te supply contracts and on-hand inventory resulted in a delay in the impact of higher Te market prices to us until the Third Quarter 2008. Although the market for Te has moderated, the lower levels did not result in reduced costs to Amerigon because of our supplier’s need to use up inventory until late in the third quarter of 2009.

*Net Research and Development Expenses.* Net research and development expenses decreased to $5,994,000 in 2009 from $6,783,000 in 2008. This $789,000, or 12%, decrease was due to the formation of ZT Plus, lower costs to support a smaller number of new vehicle programs launched during 2009 as compared to 2008 and lower costs associated with certain new product applications of our CCS technology that are currently in development. When we formed ZT Plus, certain ongoing expenses associated with our advanced TE materials program were transferred to the new partnership and were therefore partially funded by our partner, 5N Plus. The portion of ZT Plus’ expenses associated with BSST’s ownership percentage are now classified as loss from equity investment in ZT Plus and not included in net research and development expenses. During 2009 we were still in the process of developing certain new products, such as the heated and cooled bed, heated and cooled cup holder and cold storage box and developing improvements in our current CCS system; however, the costs associated with these projects were lower during 2009 primarily due to many of the projects reaching a less costly phase of development.

*Selling, General and Administrative Expenses.* Selling, general and administrative expenses increased to $8,857,000 in 2009 compared with $7,190,000 in 2008. This $1,667,000, or 23%, increase is primarily attributable to higher management bonus expense of $994,000, legal fees of approximately $500,000 for a lawsuit initiated in 2009 and higher stock option compensation expense during 2009 as compared with 2008. During 2009, we paid and or accrued bonuses under our management incentive program whereas during 2008 the management incentive bonus program was cancelled due to the significant economic and automotive downturn. On November 17, 2009 we filed a patent infringement lawsuit against a competitor, W.E.T Automotive Systems AG. During the fourth quarter 2009 we recorded a reserve totaling $500,000 as an estimate of the legal fees related to this lawsuit. The higher stock option compensation relates to options issued to employees on two separate grant dates; 485,000 option shares on July 23, 2008 and 724,000 option shares on March 11, 2009. The expenses related to these grants were partially offset by lower stock option expenses for options that became fully vested during 2009.

*Loss from Equity Investment.* Investment in the ZT Plus joint venture by our subsidiary BSST was initiated on September 1, 2009. BSST’s investment in ZT Plus was, until the purchase by BSST of the interest in ZT Plus held by 5N Plus, Inc., being accounted for using the equity method which requires that BSST record a portion of ZT Plus’ income or loss equal to its ownership percentage to the extent of BSST’s investment balance. BSST’s initial contribution and initial investment balance, which was comprised of certain intellectual property, intellectual property rights and laboratory equipment, along with organizational and formation costs totaled $508,000. 5N Plus’ initial contribution was represented by a commitment to fund ZT Plus’ operating expenditures. During the period from September 1, 2009 through the end of 2009, BSST recorded a loss from equity investment in ZT Plus totaling $492,000 representing BSST’s share of ZT Plus’ loss for the period.

*Interest Income.* We had interest income of $10,000 for 2009 compared with $837,000 for 2008. The decrease of $827,000, or 99%, resulted from significantly lower average yields on our cash equivalents and short-term investments (see “Liquidity and Capital Resources”).

*Income Tax Expense.* We recorded an income tax expense of $325,000 during 2009. This reflected an estimated effective tax rate of approximately 53% on pretax earnings of $609,000 for 2009. During 2008, we recorded an income tax expense totaling $1,938,000 reflecting a 35% effective tax rate on pretax income of $5,502,000. This increase in effective tax rate is attributable to the effect of certain expenses, such as stock options expense for Incentive Stock Options and meals and entertainment expenses that are not deductible for tax purposes. As our pretax earnings approach break even, these expenses have a much greater impact on the effective rate causing it to increase.

### Liquidity and Capital Resources

The following table represents our cash and cash equivalents and short-term investments:

*(in Thousands)*

|  | December 31, 2010 | December 31, 2009 |
| --- | ---: | ---: |
| Cash and cash equivalents | $26,584 | $21,677 |
| Short-term investments | 9,761 | 6,704 |
|  | $36,345 | $28,381 |

We manage our cash, cash equivalents and short-term investments in order to fund operating requirements and preserve liquidity to take advantage of further business opportunities. Cash and cash equivalents increased by $4,907,000 and our short-term investments increased by $3,057,000 in 2010.

Cash provided by operating activities during 2010 was $12,394,000 and was attributable to net income of $9,538,000, plus non-cash adjustments. Non-cash adjustments included depreciation and amortization of $1,368,000, deferred taxes of $1,875,000, stock option compensation of $1,275,000, provision for doubtful accounts of $253,000, defined benefit plan expense of $251,000 and loss from equity investment of $22,000. Partially offsetting these was a net increase in net operating assets and liabilities of $2,008,000.

As of December 31, 2010, working capital was $47,239,000 as compared to $33,542,000 at December 31, 2009, an increase of $13,697,000, or 41%. Increases in cash and cash equivalents, short term investments, accounts receivable, inventory, current deferred tax assets and prepaid expenses of $4,907,000, $3,057,000, $3,867,000, $4,284,000, $3,978,000 and $641,000, respectively, were partially offset by increases in accounts payable and accrued liabilities of $5,053,000 and $2,134,000, respectively. Accounts receivable and accounts payable increased primarily as a result of a $7,319,000 increase in product revenues during the fourth quarter of 2010 compared with product revenues in the fourth quarter of 2009 and related increase in inventory purchasing to support the higher revenues. Accrued liabilities increased primarily due to higher income taxes payable reflecting higher current taxable income and higher accrued royalties and warranty expense reflecting the increased revenues during 2010. A portion of our deferred tax assets represent net operating loss and credit carry forwards. We classified a larger portion of these assets as current at December 31, 2010 as compared with December 31, 2011 due to a greater expectation for current utilization during the next year. Our cash and cash equivalents and short term investments increased due to positive cash flow generated during the year from all activities. Our short-term investments consist entirely of Certificates of Deposit (“CDs”). The CDs are held by a number of different financial institutions with no individual deposit exceeding $250,000 at any individual institution. Our entire CD portfolio is therefore protected by insurance provided by the Federal Deposit Insurance Corporation (“FDIC”).

Cash used in investing activities was $10,021,000 during 2010, reflecting purchases of short-term investments of $11,612,000 less maturities of $8,555,000, cash paid to purchase of a non-controlling interest in BSST for $3,380,000, purchase of ZT Plus assets for $1,500,000, purchases of property and equipment totaling $957,000, cash paid to acquire new patents and patent application filings of $861,000, and cash invested in corporate owned life insurance of $266,000. Purchases of property and equipment for the period are primarily related to new equipment purchases for newly launched production programs.

Cash provided by financing activities was $2,438,000 during 2010, representing proceeds of Common Stock option exercises of $2,438,000.

We have $15,000,000 in revolving credit lines (“Revolving Credit Lines”) with Comerica Bank to fund future working capital requirements. At December 31, 2010, no revolving loans were outstanding. The Revolving Credit Lines also provide for a letter of credit sub-facility of $5,000,000. At December 31, 2010, outstanding letters of credit were $450,000. Loans bear interest at a Daily Adjusting LIBOR Rate, as defined by the credit agreement, plus an Applicable Margin, as defined by the credit agreement, of 1.750%. The Daily Adjusting LIBOR Rate at December 31, 2010 was 0.25%. The Revolving Credit Lines are secured by all of the Company’s assets and expire on October 31, 2011. Under the terms of the credit agreement, the Company must maintain certain financial ratios including a minimum tangible net worth ratio and a minimum funded debt to EBITDA ratio, as defined by the credit agreement. At December 31, 2010, the Company was in compliance with all terms of the credit agreement as amended.

BSST is engaged in a research and product development effort to improve the efficiency of thermoelectric devices. Until December 2010, Amerigon and Dr. Lon E. Bell owned 85% and 15%, respectively, of the outstanding interests in BSST. Amerigon purchased Dr. Bell’s ownership interest $3,380,000 during December 2010.

The Company has funded its financial needs from inception primarily through net proceeds received through its initial public offering as well as other equity and debt financing activities. Based on its current operating plan, management believes cash and equivalents at December 31, 2010 along with proceeds from future revenues are sufficient to meet operating needs for the foreseeable future.

### Recent Accounting Pronouncements

### Consolidation of Variable Interest Entities — Amended

#### (To be included in ASC 810 “Consolidation”, SFAS No. 167 “Amendments to FASB Interpretation No. 46(R)”)

The Financial Accounting Standards Board (“FASB”) has issued changes to the accounting for variable interest entities. The changes provide guidance for determining whether an entity is a variable interest entity and modifies the methods allowed for determining the primary beneficiary of a variable interest entity. The changes include: (1) the elimination of the exemption for qualifying special purpose entities, (2) a new approach for determining who should consolidate a variable interest entity, and (3) changes to when it is necessary to reassess who should consolidate a variable interest entity. The changes were effective for the first annual reporting period beginning after November 15, 2009, with earlier adoption prohibited. The Company adopted the changes on January 1, 2010 which did not have a material impact on the Company’s consolidated financial statements.

### Off-Balance Sheet Arrangements

The Company does not have any off-balance sheet arrangements (as such term is defined in Item 303(a)(4)(ii) of Regulation S-K (17 CFR 229.303)) that have, or are deemed to be reasonably likely to have, a current or future effect on the Company’s financial condition, changes in financial condition, revenues or expenses, results of operations, liquidity, capital expenditures or capital resources that would be material to investors.

### Tabular Disclosure of Contractual Obligations

As of December 31, 2010, the following amounts, aggregated by type of contract obligation, are known to come due in the periods stated:

| Contractual Obligations | Payments due by period (in thousands) Total | Less than 1 Yr | 1-3 Yrs | 3-5 Yrs | More than 5 Yrs |
| --- | ---: | ---: | ---: | ---: | ---: |
| Operating Lease Obligations | $2,528 | $943 | $1,585 | $– | $– |

## Market risk

As filed, 2,084 characters.

Our exposure to market risk for changes in interest rates relates primarily to our investment portfolio, our debt obligations under our revolving line of credit and foreign currency contracts. We currently place our investments in Certificates of Deposits with multiple banks. We have in the past, and may in the future, also place our investments in debt instruments of the U. S. government and in high-quality corporate issuers. Our investment policy seeks to ensure the safety and preservation of our invested funds by limiting default risk and market risk. We currently have no investments denominated in foreign country currencies.

The table below presents the carrying value and related weighted average interest rates for our investment portfolio. The Company considers all highly liquid investments purchased with original maturities of less than 90 days to be cash equivalents. The Certificates of Deposit are held by a number of different financial institutions with no individual deposit exceeding $250,000 at any individual institution. Our entire CD portfolio is therefore protected by insurance provided by the Federal Deposit Insurance Corporation (“FDIC”). All of the marketable securities shown in below are expected to mature during 2011. The carrying value approximates fair value at December 31, 2010.

| Marketable Securities | Carrying Value | Average Rate of Return at December 31, 2010 |
| --- | ---: | ---: |
| Money Market Mutual Funds | $24,602,000 | 0.06% |
| Certificates of Deposit | $9,761,000 | 0.55% |

Borrowings under our revolving line of credit bear interest at Comerica Bank’s prime rate (3.25% at December 31, 2010). As of December 31, 2010, there are no borrowings outstanding under our line of credit.

Our purchases of certain of our components are denominated in Japanese Yen. In order to protect ourselves from changes in the exchange rate between the U.S. Dollar and Japanese Yen we periodically enter into foreign currency forward contracts to purchase the Japanese Yen. As of December 31, 2010 we had no open forward currency contracts.

## Controls and procedures

As filed, 4,264 characters.

Our management has evaluated, with the participation of our principal executive and principal financial officers, the effectiveness of our disclosure controls and procedures and of our internal control over financial reporting, both as of December 31, 2010. Based on their evaluation, our principal executive and principal financial officers have concluded that these controls and procedures are effective as of December 31, 2010. There was no change in our internal control over financial reporting identified in connection with such evaluation that occurred during our fourth fiscal quarter ended December 31, 2010 that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

Disclosure controls and procedures are our controls and other procedures that are designed to ensure that information required to be disclosed by us in the reports that we file or submit under the Exchange Act is recorded, processed, summarized and reported, within the time periods specified in the Securities and Exchange Commission’s rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by us in the reports that we file or submit under the Exchange Act is accumulated and communicated to our management, including our principal executive and principal financial officers, as appropriate to allow timely decisions regarding required disclosure.

Internal control over financial reporting is a process designed by, or under the supervision of, our principal executive and principal financial officers, and effected by our board of directors, management and other personnel, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles and includes those policies and procedures that: (1) pertain to the maintenance of records that in reasonable detail accurately and fairly reflect our transactions and dispositions of assets, (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that our receipts and expenditures are being made only in accordance with authorizations of our management and directors, and (3) and provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of our assets that could have a material effect on the financial statements.

### Management’s Report On Internal Control Over Financial Reporting

Management of the Company is responsible for establishing and maintaining adequate internal control over financial reporting. The Company’s internal control over financial reporting was designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

Management of the Company assessed the effectiveness of the Company’s internal control over financial reporting as of December 31, 2010. In making this assessment, management used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in Internal Control-Integrated Framework. Based on our assessment, management concluded that, as of December 31, 2010, the Company’s internal control over financial reporting is effective at the reasonable assurance level based on those criteria.

Our independent registered public accounting firm, Grant Thornton LLP, has issued an attestation report on the effectiveness of our internal control over financial reporting as of December 31, 2010, as stated in their report included under Item 15.

Filed Feb 17, 2011.
Source: SEC EDGAR, the filing index for accession 0001193125-11-039213. Last ingested by Listed: Oct 26, 2026, 17:44 ET. No prices; not investment advice.
