# Techprecision Corp: Form 10-Q for the period ended Jun 30, 2009

- Company: [Techprecision Corp](/companies/tpcs.md) (CIK 1328792)
- Form: 10-Q
- Filed: 2009-08-12
- Accepted by EDGAR: Aug 12, 2009, 17:26 ET
- Period: 2009-06-30
- Accession: 0001213900-09-002013
- Inline XBRL: no
- Main document: https://www.sec.gov/Archives/edgar/data/1328792/000121390009002013/f10q0609_tprecision.htm
- All documents and exhibits: https://www.sec.gov/Archives/edgar/data/1328792/000121390009002013/

## Management's discussion and analysis

As filed, 32,045 characters.

### Statement Regarding Forward Looking Disclosure

The following discussion of the results of our operations and financial condition should be read in conjunction with our financial statements and the related notes, which appear elsewhere. This quarterly report of on Form 10-Q, including this section entitled “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” may contain predictive or “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements include, but are not limited to, statements that express our intentions, beliefs, expectations, strategies, predictions or any other statements relating to our future activities or other future events or conditions. These statements are based on current expectations, estimates and projections about our business based in part on assumptions made by management. These statements are not guarantees of future performance and involve risks, uncertainties and assumptions that are difficult to predict. Therefore, actual outcomes and results may, and probably will, differ materially from what is expressed or forecasted in the forward-looking statements due to numerous factors. Those factors include those risks discussed under “Management’s Discussion and Analysis” in our Form 10-K for the year ended March 31, 2009 and this Item 2 in this Form 10-Q and those described in any other filings which we make with the SEC. In addition, such statements could be affected by risks and uncertainties related to the U.S. and global economies, to our ability to generate business on an on-going business, to obtain any required financing, to receive contract awards from the competitive bidding process, maintain standards to enable us to manufacture products to exacting specifications, enter new markets for our services, market and customer acceptance, our reliance on a small number of customers for a significant percentage of our business, competition, government regulations and requirements, pricing and development difficulties, our ability to make acquisitions and successfully integrate those acquisitions with our business, as well as general industry and market conditions and growth rates, and general economic conditions. We undertake no obligation to publicly update or revise any forward-looking statements to reflect events or circumstances that may arise after the date of this report, except as required by applicable law.

Any forward-looking statements speak only as of the date on which they are made, and we do not undertake any obligation to update any forward-looking statement to reflect events or circumstances after the date of this report. Investors should evaluate any statements made by the Company in light of these important factors.

### Overview

We offer a full range of services required to transform raw material into precise finished products. Our manufacturing capabilities include: fabrication operations which include cutting, press and roll forming, assembly, welding, heat treating, blasting and painting; and machining operations which include CNC (computer numerical controlled) horizontal and vertical milling centers. We also provide support services in addition to our manufacturing capabilities: which include manufacturing engineering (planning, fixture and tooling development, manufacturability), quality control (inspection and testing), and production control (scheduling, project management and expediting).

All manufacturing is done in accordance with our written quality assurance program, which meets specific national and international codes, standards, and specifications. Ranor holds several certificates of authorization issued by the American Society of Mechanical Engineers and the National Board of Boiler and Pressure Vessel Inspectors. The standards used are specific to the customers’ needs, and our manufacturing operations are conducted in accordance with these standards.

During the last several years, the demand for our services has been relatively strong. However recent recessionary pressures have affected the requirements of our customers. GT Solar, which has been our largest customer for each of the past three fiscal years, has slowed production significantly and in April 2009 provided notice of its’ intention to cancel the majority of orders included in our June 30, 2009 backlog. Other customers have delayed deliveries of existing orders and have delayed the placement of new orders.

A significant portion of our revenue is generated by a small number of customers. During the three months ended June 30, 2009, our largest customer, BAE Systems, accounted for approximately 40% of our revenue, our second largest customer, Still River Systems, accounted for approximately 21% of our revenue, and our third largest customer, General Dynamics Electric Boat Corporation ,accounted for approximately 15% of our revenue. For the three months ended June 30, 2008, our largest customer, GT Solar, accounted for 69% of our revenue and BAE accounted for 13% of our revenue.

Our contracts are generated both through negotiation with the customer and from bids made pursuant to a request for proposal. Our ability to receive contract awards is dependent upon the contracting party’s perception of such factors as our ability to perform on time, our history of performance, our financial condition and our ability to price our services competitively. Although some of our contracts contemplate the manufacture of one or a limited number of units, we are seeking more long-term projects with a more predictable cost structure, and whenever possible. During the three months ended June 30, 2009, our sales and net loss were $3.3 million and ($125,745), respectively as compared to sales of $11.7 million and net income of $1.6 million, respectively, for the three months ended June 30, 2008. Our gross margin for the three months ended June 30, 2009 was 17% as compared to 29% in the three months ended June 30, 2008 as a result of lesser sales volume. Both net sales and gross margin declined in the three months ended June 30, 2009, reflecting the effects of the global economic downturn on our customers and their customers.

Because our revenues are derived from the sale of goods manufactured pursuant to a contract, and we do not sell from inventory, it is necessary for us to constantly seek new contracts. There may be a time lag between our completion of one contract and commencement of work on another contract. During such a period, we would continue to incur our overhead expense but with lower revenue. Furthermore, changes in either the scope of a contract or the delivery schedule may impact the revenue we receive under the contract and the allocation of manpower.

As of June 30, 2009, we had a backlog of orders totaling approximately $39.5 million, of which approximately $28.5 million represented orders from GT Solar. During the three months ended June 30, 2009, GT Solar provided notice of its intent to cancel a portion of an open purchase order reducing its total purchase commitment by approximately $16.8 million, reducing our total backlog to $22.7 million. Post the cancellation, the remaining GT Solar backlog of approximately $11.7 million includes approximately $3.4 million of open product purchase orders and approximately $8.3 million of material buyback. The backlog also includes orders in excess of $1.0 million from each of five customers totaling more than $7.9 million in addition to GT Solar. We expect to deliver the backlog during the years ended March 31, 2010 and March 31, 2011.

Although we provide manufacturing services for large governmental programs, we usually do not work directly for agencies of the United States government. Rather, we perform our services for large governmental contractors and large utility companies. However, our business is dependent in part on the continuation of governmental programs which require the services we provide.

### Growth Strategy

Our strategy is to leverage our core competence as a manufacturer of high-precision, large-scale metal fabrications and machined components to expand our business into areas which have shown increasing demand and which we believe could generate higher margins.

### Diversifying Our Core Industries

We believe that rising energy demands along with increasing environmental concerns are likely to continue to drive demand in the alternative energy industry, particularly the solar, wind and nuclear power industries. Because of our capabilities and the nature of the equipment required by companies in the alternative energy industries, we intend to focus our services in this sector. We also expect to market our services for medical device applications where customer requirements demand strict tolerances and an ability to manufacture complex heavy equipment.

As a result of both the increased prices of oil and gas and the resulting greenhouse gas emissions, nuclear power may become an increasingly important source of energy. Because of our manufacturing capabilities, our certification from the American Society of Mechanical Engineers and our historic relationships with suppliers in the nuclear power industry, we believe that we are well positioned to benefit from any increased activity in the nuclear sector that may result. However, revenues derived from the nuclear power industry were insignificant for the three months ended June 30, 2009 and currently constitute approximately 5% of our backlog that we expect to deliver by March 31, 2010 and March 2011. We cannot assure you that we will be able to develop any significant business from the nuclear industry.

In addition to the nuclear energy industry, we are also exploring potential business applications focused on the medical industry. These efforts include the development and fabrication of medical isotopes storage solutions and the development and fabrication of critical components for proton beam therapy machines designed to be utilized in the treatment of cancer. Net sales from our proton beam therapy customer accounted for 21% of our total net sales for the three months ended June 30, 2009 while sales to our medical isotope customer were not significant during the three months ended June 30, 2009.

### Expansion of Manufacturing Capabilities

In addition to the possible expansion of our existing manufacturing capabilities through expansion of our existing facilities, we may, from time to time, pursue opportunistic acquisitions to increase and strengthen our manufacturing, marketing, product development capabilities and customer diversification. We do not have any current plans for any acquisition, and we cannot give any assurance that we will complete any acquisition.

### Impact of Recent Legislation

The Congress has passed and the President has signed the $800 billion American Recovery and Reinvestment Act of 2009 into law. Significant components of the bill allow manufacturing concerns to apply various tax credits and apply for government loan guarantees for the development of or the retooling of existing facilities for using electricity derived from renewable and previously underutilized sources. The Company has historically derived significant revenues from contracts with manufacturing concerns in these alternative energy fields. The American Recovery and Reinvestment Act extended the 50% Bonus depreciation enacted as a part of the Economic Stimulus Act of 2008. Under the Act, 50% of the basis of the qualified property may be deducted in the year the property is placed in service (i.e. 2008 and 2009). The remaining 50% is recovered under otherwise applicable depreciation rules. This significant tax incentive could drive increased demand on the part of some customers.

### Critical Accounting Policies

The preparation of the Company’s financial statements in conformity with generally accepted accounting principles in the United States requires our management to make assumptions, estimates and judgments that affect the amounts reported in the financial statements, including all notes thereto, and related disclosures of commitments and contingencies, if any. We rely on historical experience and other assumptions we believe to be reasonable in making our estimates. Actual financial results of the operations could differ materially from such estimates. There have been no significant changes in the assumptions, estimates and judgments used in the preparation of our financial statements for the three months ended June 30, 2009 from the assumptions, estimates and judgments used in the preparation of our audited financial statements for the year ended March 31, 2009.

### Revenue Recognition and Costs Incurred

We derive revenues from (i) the fabrication of large metal components for our customers; (ii) the precision machining of such large metal components, including incidental engineering services; and (iii) the installation of such components at the customers’ locations when the scope of the project requires such installations.

Revenue and costs are recognized on the units of delivery method. This method recognizes as revenue the contract price of units of the product delivered during each period and the costs allocable to the delivered units as the cost of earned revenue. When the sales agreements provide for separate billing of engineering services, the revenues for those services are recognized when the services are completed. Costs allocable to undelivered units are reported in the balance sheet as costs incurred on uncompleted contracts. Amounts in excess of agreed upon contract price for customer directed changes, constructive changes, customer delays or other causes of additional contract costs are recognized in contract value if it is probable that a claim for such amounts will result in additional revenue and the amounts can be reasonably estimated. Revisions in cost and profit estimates are reflected in the period in which the facts requiring the revision become known and are estimable. The unit of delivery method requires the existence of a contract to provide the persuasive evidence of an arrangement and determinable seller’s price, delivery of the product and reasonable collection prospects. The Company has written agreements with the customers that specify contract prices and delivery terms. The Company recognizes revenues only when the collection prospects are reasonable.

Adjustments to cost estimates are made periodically, and losses expected to be incurred on contracts in progress are charged to operations in the period such losses are determined and are reflected as reductions of the carrying value of the costs incurred on uncompleted contracts. Costs incurred on uncompleted contracts consist of labor, overhead, and materials. Work in process is stated at the lower of cost or market and reflects accrued losses, if required, on uncompleted contracts.

### Variable Interest Entity

We have consolidated WM Realty, a variable interest entity from which we lease our real estate, to conform to FASB Interpretation No. 46, “Consolidation of Variable Interest Entities” (FIN 46). We have also adopted the revision to FIN 46, FIN 46 (R), which clarified certain provisions of the original interpretation and exempted certain entities from its requirements.

### Income Taxes

We provide for federal and state income taxes currently payable, as well as those deferred because of temporary differences between reporting income and expenses for financial statement purposes versus tax purposes. Deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences between carrying amount of assets and liabilities for financial reporting purposes and the amounts used for income tax purposes. Deferred tax assets and liabilities are measured using the enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recoverable. The effect of the change in the tax rates is recognized as income or expense in the period of the change. A valuation allowance is established, when necessary, to reduce deferred income taxes to the amount that is more likely than not to be realized.

For the three months ended June 30, 2009 and 2008, the Company recorded provisions for the Federal and State income tax benefit and income tax expense of $183,685 and $(1,064,250), respectively. The effective tax benefit and expense rates for the three months ended June 30, 2009 and 2008 were (60)% and 40% respectively. The difference between the provision for income taxes and the income tax determined by applying the statutory federal income tax rate of 39% was due primarily to differences in the lives and methods used to depreciate and/or amortize our property and equipment, timing differences of expenses related compensated absences, net operating loss carryforwards, and operating losses that occurred during the period.

As of June 30, 2009, the Company’s federal net operating loss carry-forward was approximately $1,780,714. If not utilized, the federal net operating loss carry-forward of Ranor and Techprecision will expire in 2025 and 2027, respectively. Furthermore, because of over fifty percent change in ownership as a consequence of the reverse acquisition in February 2006, as a result of the application of Section 382 of the Internal Revenue Code, the amount of net operating loss carry forward used in any one year in the future is substantially limited.

### New Accounting Pronouncements

See Note 2, Significant Accounting Policies, in the Notes to the Consolidated Financial Statements.

### Results of Operations

### Three Months Ended June 30, 2009 and 2008

The following table sets forth information from our statements of operations for the three months ended June 30, 2009 and 2008, in dollars and as a percentage of revenue (dollars in thousands):

|  | 2009 Amount | Percent | 2008 Amount | Percent | Changes Three Months Ended June 30, 2009 to 2008 Amount | Percent |
| --- | ---: | ---: | ---: | ---: | ---: | ---: |
| Net sales | $3,318 | 100% | $11,658 | 100% | $(8,340) | (72)% |
| Cost of sales | 2,754 | 83% | 8,277 | 71% | (5,523) | (67)% |
| Gross profit | 564 | 17% | 3,381 | 29% | (2,817) | (83)% |
| Payroll and related costs | 394 | 12% | 435 | 4% | (41) | (9)% |
| Professional expense | 76 | 2% | 47 | 0% | 29 | 62% |
| Selling, general and administrative | 298 | 9% | 139 | 1% | 159 | 114% |
| Total operating expenses | 768 | 23% | 621 | 5% | 147 | 24% |
| Income (loss) from operations | (204) | (6)% | 2,760 | 24% | (2,964) | (107)% |
| Interest expense, net | (101) | (3)% | (119) | (1)% | 18 | (15)% |
| Finance costs | (4) | 0% | (4) | 0% | - | -% |
| Income (loss) before income taxes | (309) | (9)% | 2,637 | 23% | (2,946) | (112)% |
| Provision for income taxes, net | 184 | 6% | (1,064) | (9)% | 1,248 | 117% |
| Net (loss) income | $(125) | (4)% | 1,573 | 13% | (1,698) | (108)% |

Our results of operations are affected by a number of external factors including the availability of raw materials, commodity prices (particularly steel and graphite prices), macro economic factors, including the availability of capital that may be needed by our customers, and political, regulatory and legal conditions in the United States and foreign markets.

Our results of operations are also affected by a number of other factors including, among other things, success in booking new contracts and when we are able to recognize the related revenue, delays in customer acceptances of our products, delays in deliveries of ordered products and our rate of progress in the fulfillment of our obligations under our contracts. A delay in deliveries or cancellations of orders would cause us to have inventories in excess of our short-term needs, and may delay our ability to recognize, or prevent us from recognizing, revenue on contracts in our order backlog.

Recent disruptions in the global capital markets have resulted in reduced availability of funding worldwide and a higher level of uncertainty experienced by some end-user solar cell module manufacturers. As a result, our customers have made reductions in their direct labor workforce and reported decreases in their order backlogs as well as adjustments to the procurement of materials in their photovoltaic related production. In response, we have been negotiating extensions of the delivery schedules and other modifications under some of our existing contracts. During the three months ended, 2009, GT Solar provided notice of its intent to cancel a portion of an open purchase order reducing the total purchase commitment by approximately $16.8 million, reducing our total backlog to $21.8 million. Post the cancellation, the remaining GT Solar backlog of approximately $11.7 million includes approximately $3.4 million of open product purchase orders and approximately $8.3 million of material buyback.

### Net Sales

Net sales decreased by $8.3 million , or 72%, from $11.7 million for the three months ended June 30, 2008 to $3.3 million for the three months ended June 30, 2009. A significant portion of the decrease resulted from decrease in sales to GT Solar. The global economic downturn adversely impacted our operations in much of the first quarter of fiscal year 2009.

### Cost of Sales and Gross Margin

Our cost of sales for the three months ended June 30, 2009 decreased by $5.5 million to $2,8 million a decrease of 67%, from $8.3 million for three months ended June 30, 2008. The decrease in the cost of sales was principally due to the reduction in volume of sales. The decline in gross profit margin was $2.8 million (83%) from $3.4 million or 29% of sales, during the three months ended June 30, 2008 to $564,,802 or 17% of sales for the period ending June 30, 2009. Contributing to the deline in gross margin were costs associated with underutilized capacity as well as relatively higher labor cost on several contracts.

### Operating Expenses

Our payroll and related costs within our selling and administrative costs were $393,367 for the three months ended June 30, 2009 as compared to $435,095 for the three months ended June 30, 2008. The $41,529 (10%) decrease in payroll is due primarily to a decline in bonus compensation compared to the prior year..

Professional fees increased from $47,687 for the three months ended June 30, 2008 to $76,212 for the three months ended June 30, 2009. This increase was primarily attributable to an increase in legal costs related to contract review and SEC filing requirements.

Selling, administrative and other expenses three months ended June 30, 2009 were $298,421 as compared to $138,996 for three months ended June 30, 2008, an increase of $159,425 or 114%. Additional expenditures of $112,500 related to executive severance pay were the principal component of the increase.

### Interest Expense

Interest expense for three months ended June 30, 2009 was $104,162 compared to $118,781 for the three months ended June 30, 2008. The decrease of $14,619 (11%) is a result of lower principal balances of the Sovereign and Amalgamated bank loans outstanding in the three months ended June 30, 2009 as compared to the three months ended June 30, 2008.

### Net Income

As a result of the foregoing, our net loss was ($124,745) ($0.01 per share) for the three months ended June 30, 2009, as compared to net income of $1.57 million ($0.12 and $.0.06 per share basic and diluted, respectively) for the three months ended June 30, 2008.

### Liquidity and Capital Resources

At June 30 2009, we had working capital of $10..9 million as compared to working capital of $11.1 million at March 31, 2009, a decrease of $205,787 or 1.8% . The following table sets forth information as to the principal changes in the components of our working capital (dollars in thousands).

| Category | June 30, 2009 | March 31, 2009 | Change Amount | Percentage Change |
| --- | ---: | ---: | ---: | ---: |
| Cash and cash equivalents | 9,404 | 10,463 | (1,059) | (10.1)% |
| Accounts receivable, net | 1,656 | 1,419 | 237 | 16.7% |
| Costs incurred on uncompleted contracts | 3,530 | 3,661 | (131) | (3.6)% |
| Raw material inventories | 305 | 351 | (46) | (13.1)% |
| Prepaid expenses | 1,556 | 1,583 | (27) | (1.7)% |
| Deferred tax asset | 246 | -- | 246 | --% |
| Other receivables | 30 | 60 | (30) | (50.0)% |
| Accounts payable | 632 | 951 | (319) | (33.6)% |
| Accrued expenses | 459 | 710 | (251) | (35.3)% |
| Accrued severance | 113 | - | 113 |  |
| Accrued taxes | - | 156 | (156) | (100.0)% |
| Progress billings in excess of cost of uncompleted contracts | 3,953 | 3,945 | 8 | 0.2% |
| Current maturity of long-term debt | 625 | 625 | (0) | 0.0% |

The cash used in operations was $856,642 for the three months ended June 30, 2009 as compared to the cash provided by operations of $1,2 million for the three months ended June 30, 2008. The decrease in cash flows from operations of $2.1 million or 170%, was the net effect of a decrease in the net profits, decrease in costs incurred on uncompleted contracts and payment of accounts payable and accrued expenses in the three months ended June 30, 2009.

The net cash used in financing activities was $202,152 for the three months ended June 30, 2009 as compared to $30,032 for the three months ended June 30, 2008. During the three months ended June 30, 2009, we made principal payment of $142,857 on our loans from Sovereign Bank and principal payments of $3,251 on capital lease obligations. In addition, WM Realty made principal payments on its mortgage of $9,559. WM Realty also made capital distributions to its members of $45,375. During the three months ended June 30, 2008, the Company made principal payments of $142,857 on our loans from Sovereign Bank and received $170,060 from the exercise of warrants. WM Realty made mortgage principal reduction payments totaling $8,788 and made capital distributions to its members of $46,875.

During the three months ended June 30, 2009, the installation of the equipment under construction at March 31, 2009 had been fully completed, placed into service and was transferred to property, plant and equipment. We did not engage in additional investing activities for the three months ended June 30, 2009. For the three months ended June 30, 2008 we invested $123,540 in property, plant and equipment and paid a deposit on equipment of $150,000. This deposit was credited to our purchase price in fiscal 2009 when the equipment was received.

The net decrease in cash was $1,.06 million for the three months ended June 30, 2009, as compared to $921,214 increase for the for the three months ended June 30, 2008.

At June 30, 2009, WM Realty had an outstanding mortgage of $3.1 million on the real property that it leases to Ranor. The mortgage has a term of ten years, maturing November 1, 2016, bears interest at 6.75% per annum, and provides for monthly payments of principal and interest of $20,955. The monthly payments are based on a thirty-year amortization schedule, with the unpaid principal being due in full at maturity. WM Realty has the right to prepay the mortgage note upon payment of a prepayment premium of 5% of the amount prepaid if the prepayment is made during the first two years, and declining to 1% of the amount prepaid if the prepayment is made during the ninth or tenth year.

### Debt Facilities

We have a loan and security agreement with Sovereign Bank, dated February 24, 2006, pursuant to which we borrowed $4.0 million on a term loan basis in connection with our acquisition of Ranor. As a result of amendments to the loan and security agreement, we currently have a $2.0 million revolving credit facility which is available until June 30, 2010. We also have a $3.0 million capital expenditure facility which is available until November 30, 2009. Pursuant to the terms of the capital expenditure facility we may request financing of capital equipment purchased through November 30, 2009, at which time any amounts borrowed under the line are to be amortized over a five year period. Pursuant to the agreement, Ranor is required to maintain a ratio of earnings available for fixed charges to fixed charges of at least 1.2 to 1, and an interest coverage ratio of 2 to 1. At June 30, 2009, we were in compliance with both of these ratios, with Ranor’s ratio of earnings available for fixed charges to fixed charges being 3.6 to 1 and Ranor’s interest coverage ratio, calculated on a rolling basis being 15.2 to 1.

The term note issued on February 24, 2006 has a term of 7 years with an initial fixed interest rate of 9%. The interest rate on the term note converts from a fixed rate of 9% to a variable rate on February 28, 2011. From February 28, 2011 until maturity the term note will bear interest at the prime rate plus 1.5%, payable on a quarterly basis. Principal is payable in quarterly installments of $142,857 plus interest, with a final payment due on March 1, 2013.

The term note is subject to various covenants that include the following: the loan collateral comprises all personal property of Ranor, including cash, accounts receivable inventories, equipment, financial and intangible assets. Ranor must also maintain a ratio of earnings available to cover fixed charges of at least 120% of the fixed charges for the rolling four quarters, tested at the end of each fiscal quarter. Additionally, Ranor must also maintain an interest coverage ratio of at least 2:1 at the end of each fiscal quarter. Ranor’s obligations under the notes to the bank are guaranteed by Techprecision. At June 30, 2009, there were no borrowings under the revolving note and the maximum available under the borrowing formula was $2.0 million.

Under the $3.0 million capital expenditures facility Ranor is able to borrow up to $3.0 million until November 30, 2009. We pay interest only on borrowings under the capital expenditures line until November 30, 2009, at which time the principal balance is amortized over five years, commencing December 31, 2009. The interest on borrowings under the capital expenditure line is either equal to the prime plus ½% or the LIBOR rate plus 3%, as the Company may elect. Any unpaid balance on the capital expenditures facility is to be paid on November 30, 2014. As of June 30, 2009 and June 30, 2008, there were no borrowings outstanding under either the revolving line or the capital expenditure line. We intend to borrow approximately $880,000 to finance the purchase of equipment that has been installed and placed in service during the quarter ended June 30, 2009..

The securities purchase agreement pursuant to which we sold the series A preferred stock and warrants to Barron Partners provides Barron Partners with a right of first refusal on future equity financings, which may affect our ability to raise funds from other sources if the need arises.

We believe that the $2.0 million revolving credit facility, which remained unused as of June 30, 2009 and terminates in June 2010, and the $3.0 million capital expenditure facility and our cash flow from operations should be sufficient to enable us to satisfy our cash requirements at least through the end of fiscal 2010. Nevertheless, it is possible that we may require additional funds to the extent that we expand our manufacturing facilities. In the event that we make an acquisition, we may require additional financing for the acquisition. However, we do not have any current plans for any acquisition, and we cannot give any assurance that we will complete any acquisition. We have no commitment from any party for additional funds; however, the terms of our agreement with Barron Partners, particularly Barron Partners’ right of first refusal, may impair our ability to raise capital in the equity markets to the extent that potential investors would be reluctant to negotiate a financing when another party has a right to match the terms of the financing.

## Controls and procedures

As filed, 1,213 characters.

### Evaluation of Disclosure Controls and Procedures

As of June 30, 2009, we carried out an evaluation, under the supervision and with the participation of management, including our chief executive officer and chief financial officer, of the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rule 13a-15(e) under the Securities Exchange Act of 1934 (the “Exchange Act”)).

Based upon that evaluation, our chief executive officer and chief financial officer concluded that our disclosure controls and procedures were effective as of June 30, 2009, to ensure that information required to be disclosed by us in the reports that we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in Securities and Exchange Commission rules and forms.

### Changes in Internal Controls

There was no change in our internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) of the Securities Exchange Act of 1934) that occurred during the quarter ended June 30, 2009 that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

Filed Aug 12, 2009.
Source: SEC EDGAR, the filing index for accession 0001213900-09-002013. Last ingested by Listed: Nov 10, 2026, 04:27 ET. No prices; not investment advice.
