# Techprecision Corp: Form 10-Q for the period ended Sep 30, 2010

- Company: [Techprecision Corp](/companies/tpcs.md) (CIK 1328792)
- Form: 10-Q
- Filed: 2010-11-15
- Accepted by EDGAR: Nov 15, 2010, 17:25 ET
- Period: 2010-09-30
- Accession: 0001213900-10-004795
- Inline XBRL: no
- Main document: https://www.sec.gov/Archives/edgar/data/1328792/000121390010004795/f10q0910_techprecision.htm
- All documents and exhibits: https://www.sec.gov/Archives/edgar/data/1328792/000121390010004795/

## Management's discussion and analysis

As filed, 42,470 characters.

### Statement Regarding Forward Looking Disclosure

The following discussion of the results of our operations and financial condition should be read in conjunction with our financial statements and the related notes, which appear elsewhere in this quarterly report on Form 10-Q. This quarterly report on Form 10-Q, including this section entitled “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” may contain predictive or “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements include, but are not limited to, statements that express our intentions, beliefs, expectations, strategies, predictions or any other statements relating to our future activities or other future events or conditions. These statements are based on current expectations, estimates and projections about our business based in part on assumptions made by management. These statements are not guarantees of future performance and involve risks, uncertainties and assumptions that are difficult to predict. Therefore, actual outcomes and results may, and probably will, differ materially from what is expressed or forecasted in the forward-looking statements due to numerous factors. Those factors include those risks discussed in this Item 2 “Management’s Discussion and Analysis” in this Form 10-Q and those described in any other filings which we make with the SEC. In addition, such statements could be affected by risks and uncertainties related to our ability to generate business on an on-going business, to obtain any required financing, to receive contract awards from the competitive bidding process, maintain standards to enable us to manufacture products to exacting specifications, enter new markets for our services, market and customer acceptance, our reliance on a small number of customers for a significant percentage of our business, competition, government regulations and requirements, pricing and development difficulties, our ability to make acquisitions and successfully integrate those acquisitions with our business, as well as general industry and market conditions and growth rates, and general economic conditions. We undertake no obligation to publicly update or revise any forward looking statements to reflect events or circumstances that may arise after the date of this report, except as required by applicable law. Any forward-looking statements speak only as of the date on which they are made, and we do not undertake any obligation to update any forward-looking statement to reflect events or circumstances after the date of this report. Investors should evaluate any statements made by the Company in light of these important factors.

### Overview

We offer a full range of services required to transform raw material into precise finished products. Our manufacturing capabilities include: fabrication operations which include cutting, press and roll forming, assembly, welding, heat treating, blasting and painting; and machining operations which include CNC (computer numerical controlled) horizontal and vertical milling centers. We also provide support services to our manufacturing capabilities: manufacturing engineering (planning, fixture and tooling development, manufacturability), quality control (inspection and testing), materials procurement, and production control (scheduling, project management and expediting).

All manufacturing is done in accordance with our written quality assurance program, which meets specific national and international codes, standards, and specifications. Ranor holds several certificates of authorization issued by the American Society of Mechanical Engineers and the National Board of Boiler and Pressure Vessel Inspectors. The standards used are specific to the customers’ needs, and our manufacturing operations are conducted in accordance with these standards.

During the years ended March 31, 2009 and 2008, demand for our services was relatively strong. However, recessionary pressures began to affect the requirements of our customers in October 2008. GT Solar, which has been our largest customer for each of the past three fiscal years, slowed production significantly during the second half of the fiscal year ended March 31, 2009 and in April 2009, canceled the majority of its outstanding purchase orders. Beginning in December 2009, we began to see an improvement in the volume of requests for quotes and order placements from our customers, including our largest customer and reported that our backlog had reached $21.5 million as of March 31, 2010. We ended the second quarter of the fiscal year ending March 31, 2011 (Fiscal 2011) with an order backlog of $26.4 million. We expect to deliver this backlog during the years ended March 31, 2011 and March 31, 2012. Included in our backlog at September 30, 2010 were $7.7 million of purchase orders from GT Solar.

A significant portion of our revenue is generated by a small number of customers. For the six months ended September 30, 2010, our largest customer, GT Solar, accounted for 54% of our revenue and BAE Systems accounted for 23% of our revenue. In the year ended March 31, 2010, GT Solar accounted for approximately 52% of our revenue, and BAE Systems accounted for approximately 14% of our revenue.

The Company historically has experienced, and continues to experience, customer concentration. In any year, it is likely that five or six significant customers (albeit not always the same customers from year to year) will account for 5% to 60% individually and up to 86% in the aggregate of our total annual revenues. A significant loss of business from the Company’s largest customer or a combination of several of our significant customers could result in lower operating profitability and/or operating losses if the Company is unable to replace such lost revenue from other sources. A material, sustained downturn in revenue could make it more challenging for the Company to meet debt covenants under its existing long-term debt agreements. If the Company defaulted on such covenants and was unable to cure the defaults or obtain waivers, the lending bank could choose to accelerate payment of any amounts outstanding under various debt facilities and, under certain circumstances, the bank may be entitled to cancel the facilities. If the bank chose to accelerate our obligations, such acceleration may cause the Company’s cash position to deteriorate or, if cash on hand were insufficient to satisfy any payment due, may require the Company to obtain alternate financing.

Our contracts are generated both through negotiation with the customer and from bids made pursuant to a request for proposal. Our ability to receive contract awards is dependent upon the contracting party’s perception of such factors as our ability to perform on time, our history of performance, our financial condition and our ability to price our services competitively. Although some of our contracts contemplate the manufacture of one or a limited number of units, we are seeking more long-term projects with a more predictable cost structure. For the six months ended September 30, 2010, our sales and net income was $14.5 million and $1.7 million, as compared to sales of $18.4 million and net income of $1.2 million for the six months ended September 30, 2009. Our gross margin for the six months ended September 30, 2010 was 33.7% as compared to 17.4% for the six months ended September 30, 2009, reflecting increased sales volume and higher capacity utilization during the quarter ended September 30, 2010. A majority of the sales and production volume during the first six months of FY 2011 was attributed to new orders from GT Solar, our largest customer, as well as higher volumes of business from several other customers.

Because our revenues are derived from the sale of goods manufactured pursuant to a contract, and we do not sell from inventory, we must constantly seek new contracts. There may be a time lag between our completion of one contract and commencement of work on another contract. During this period, we will continue to incur overhead expense but with lower revenue resulting in lower operating margins. Furthermore, changes in either the scope of a contract or the delivery schedule may impact the revenue we receive under the contract and the allocation of manpower.

Although we provide manufacturing services for large governmental programs, we usually do not work directly for agencies of the United States government. Rather, we perform our services for large governmental contractors and large utility companies. However, our business is dependent in part on the continuation of governmental programs which require the services we provide.

### Growth Strategy

Our strategy is to leverage our core competence as a manufacturer of high-precision, large-scale metal fabrications and machined components to expand our business into markets such as clean tech, alternative energy and medical devices, which have shown increasing demand and which we believe could generate higher margins.

### Diversifying Our Core Industries

We believe that rising energy demands along with increasing environmental concerns are likely to continue to drive demand in the alternative energy industry, particularly the solar, wind and nuclear power industries. Because of our capabilities and the nature of the equipment required by companies in the alternative energy industries, we intend to focus our services in this sector. We also expect to market our services for medical device applications where customer requirements demand strict tolerances and an ability to manufacture complex heavy equipment.

As a result of both the increased prices of oil and gas and the resulting greenhouse gas emissions, nuclear power may become an increasingly important source of energy. In January 2010, the Obama administration increased the level of government-backed debt guarantees from $18 billion to $56 billion as an incentive to support the construction of new nuclear plants in the U.S. We did not derive any revenue from the nuclear power industry during the quarter ended September 30, 2010 but nuclear-related revenues were $1.8 million for the year ended March 31, 2010 (fiscal 2010). Currently, nuclear-related orders constituted approximately 5.8% of our September 30, 2010 backlog. Because of our manufacturing capabilities, our certification from the American Society of Mechanical Engineers and our historic relationships with suppliers in the nuclear power industry, we believe that we are well positioned to benefit from any increased activity in the nuclear sector. However, we cannot assure you that we will be able to develop any significant business from the nuclear industry.

In addition to the nuclear energy industry, we are also exploring potential business applications in the medical industry. These efforts include the development and fabrication of radioactive isotopes transportation/storage solutions and the development and fabrication of critical components for proton beam therapy machines designed to be utilized in the treatment of cancer. Net sales from our proton beam therapy customer accounted for $1.7 million and $3.7 million or 6% and 9.7% of our total net sales for the years ended March 31, 2010 and 2009, respectively. During the six month period ending September 30, 2010, net sales to our proton beam therapy customer were $791,943 or 5.4% of sales for the six month period then ended.

### Expansion of Manufacturing Capabilities

In addition to the possible expansion of our existing manufacturing capabilities, we may, from time to time, pursue opportunistic acquisitions to increase and strengthen our manufacturing, marketing, product development capabilities and customer diversification. On January 8, 2010, the Company issued a purchase order for the purchase of a gantry mill machine totaling $2.3 million. This purchase commitment represents an investment necessary to refresh and upgrade the Company’s fleet of manufacturing equipment and capabilities. The Company intends to borrow up to 80% of the purchase price in order to finance these payments. Under this purchase commitment, the Company is obligated to make three equal payments beginning in January 2010 with the final payment to be made upon final delivery approximately one year from the purchase order date. The Company made its first payment in fiscal 2010 and its second payment of $695,520 in the quarter ended September 30, 2010. On March 29, 2010 and September 30, 2010, Ranor drew down equal amounts of $556,416 under this facility to finance the purchase of the gantry mill machine.

### Critical Accounting Policies

The preparation of the Company’s financial statements in conformity with generally accepted accounting principles in the United States requires our management to make assumptions, estimates and judgments that affect the amounts reported in the financial statements, including all notes thereto, and related disclosures of commitments and contingencies, if any. We rely on historical experience and other assumptions we believe to be reasonable in making our estimates. Actual financial results of the operations could differ materially from such estimates. There have been no significant changes in the assumptions, estimates and judgments used in the preparation of our unaudited financial statements for the three months ended September 30, 2010, from the assumptions, estimates and judgments used in the preparation of our 2010 audited financial statements.

### Revenue Recognition and Costs Incurred

We derive revenues from (i) the fabrication of large metal components for our customers; (ii) the precision machining of such large metal components, including incidental engineering services; (iii) the installation of such components at the customers’ locations when the scope of the project requires such installations; and (iv) the procurement of raw materials necessary for the fabrication and machining of components.

Revenue and costs are recognized on the units of delivery method. This method recognizes as revenue the contract price of units of the product delivered during each period and the costs allocable to the delivered units as the cost of earned revenue. When the sales agreements provide for separate billing of engineering services, the revenues for those services are recognized when the services are completed. Costs allocable to undelivered units are reported in the balance sheet as costs incurred on uncompleted contracts. Amounts in excess of agreed upon contract price for customer directed changes, constructive changes, customer delays or other causes of additional contract costs are recognized in contract value if it is probable that a claim for such amounts will result in additional revenue and the amounts can be reasonably estimated. Revisions in cost and profit estimates are reflected in the period in which the facts requiring the revision become known and are estimable. The unit of delivery method requires the existence of a contract to provide the persuasive evidence of an arrangement and determinable seller’s price, delivery of the product and reasonable collection prospects. The Company has written agreements with the customers that specify contract prices and delivery terms. The Company recognizes revenues only when the collection prospects are reasonably assured.

Adjustments to cost estimates are made periodically, and losses expected to be incurred on contracts in progress are charged to operations in the period such losses are determined and are reflected as reductions of the carrying value of the costs incurred on uncompleted contracts. Costs incurred on uncompleted contracts consist of labor, overhead, and materials. Work in process is stated at the lower of cost or market and reflects accrued losses, if required, on uncompleted contracts.

### Variable Interest Entity

We have consolidated WM Realty, a variable interest entity from which we lease our real estate.

### Income Taxes

We provide for federal and state income taxes currently payable, as well as those deferred because of temporary differences between reporting income and expenses for financial statement purposes versus tax purposes. Deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences between carrying amount of assets and liabilities for financial reporting purposes and the amounts used for income tax purposes. Deferred tax assets and liabilities are measured using the enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recoverable. The effect of the change in the tax rates is recognized as income or expense in the period of the change. A valuation allowance is established, when necessary, to reduce deferred income taxes to the amount that is more likely than not to be realized.

As of March 31, 2010, the Company’s federal net operating loss carry-forward was approximately $1.9 million. If not utilized, the federal net operating loss carry-forward of Ranor and TechPrecision will expire in 2025 and 2027, respectively. Furthermore, because of the over fifty-percent change in ownership as a consequence of the reverse acquisition in February 2006, the amount of net operating loss carry forward used in any one year in the future is substantially limited.

### New Accounting Pronouncements

See Note 2, Significant Accounting Policies, in the Notes to the Consolidated Financial Statements.

### Results of Operations

Our results of operations are affected by a number of external factors including the availability of raw materials, commodity prices (particularly steel), macro economic factors, including the availability of capital that may be needed by our customers, and political, regulatory and legal conditions in the United States and foreign markets.

Our results of operations are also affected by a number of other factors including, among other things, success in booking new contracts and when we are able to recognize the related revenue, delays in customer acceptances of our products, delays in deliveries of ordered products and our rate of progress in the fulfillment of our obligations under our contracts. A delay in deliveries or cancellations of orders would cause us to have inventories in excess of our short-term needs, and may delay our ability to recognize, or prevent us from recognizing, revenue on contracts in our order backlog.

During the six months ended September 30, 2010, we benefited from renewed orders sourced by our largest customer, GT Solar which began placing new orders in January 2010, trailing their significant order cancellation in April 2009. Sales of finished goods to GT Solar during the six months ended September 30, 2010 totaled $7.8 million as compared to $0.8 million in finished good sales and an inventory transfer of $8.9 million totaling $9.7 million during the same period in the prior year. During the fourth quarter for the year ended March 31, 2010, we began to see signs of recovery within the solar sector in the form of new production orders placed by our largest customer and a build up in our sales order backlog. During the six months ended September 30, 2010, our backlog increased from $21.5 million at March 31, 2010 to $26.4 million as of September 30, 2010. The September 30, 2010 backlog included $7.7 million in orders from GT Solar. The comparable backlog at September 30, 2009 was $14.4 million and included $2.4 million in orders from GT Solar.

### Three Months Ended September 30, 2010 and 2009

The following table sets forth information from our statements of operations for the three months ended September 30, 2010 and 2009, in dollars and as a percentage of revenue (dollars in thousands):

|  | Sept. 30, 2010 Amount | Percent | Sept. 30, 2009 Amount | Percent | Changes Three Months Ended September 30, 2010 to 2009 Amount | Percent |
| --- | ---: | ---: | ---: | ---: | ---: | ---: |
| Net sales | $8,381 | 100% | $15,117 | 100% | $(6,736) | (45)% |
| Cost of sales | 5,796 | 69% | 12,471 | 83% | (6,675) | (54)% |
| Gross profit | 2,585 | 31% | 2,646 | 17% | (61) | (2)% |
| Payroll and related costs | 506 | 6% | 331 | 2% | 175 | 53% |
| Professional expense | 167 | 2% | 111 | 1% | 56 | 52% |
| Selling, general and administrative | 448 | 5% | 227 | 1% | 221 | 98% |
| Total operating expenses | 1,121 | 13% | 669 | 4% | 452 | 68% |
| Income from operations | 1,464 | 18% | 1,977 | 13% | (513) | (26)% |
| Interest expense | (110) | (2)% | (107) | (1)% | 3 | 3% |
| Other income (expense) | 4 | -% | 1 | -% | 3 | 300% |
| Income before income taxes | 1,358 | 16% | 1,871 | 12% | (513) | (27)% |
| Income tax expense | 502 | 7% | 550 | 3% | (48) | (8)% |
| Net income | $856 | 9% | $1,321 | 9% | $(465) | (35)% |

### Net Sales

Net sales decreased by $6.7 million, or 45%, to $8.4 million for the three months ended September 30, 2010 when compared to the same period last year. However, sales to the Company’s largest customer during the quarter ended September 30, 2009, included a one-time $8.9 million inventory transfer triggered by that customer’s April 2009 cancellation of open purchase orders. Adjusting for this inventory transfer in the prior year, sales increased by $2.2 million or 36% to $8.4 million from $6.2 million on a comparative basis primarily driven by higher demand in markets served by the Company’s largest customer. We believe that such an adjustment is useful because the inventory transfer completed during the quarter ended September 30, 2009 is unlikely to recur in the near term. The table below highlights components of net sales for the three month periods ending September 30, 2010 and 2009 (dollars in millions):

|  | 2010 | 2009 |
| --- | ---: | ---: |
| Inventory transfer to largest customer | $-- | $8.9 |
| Other sales to largest customer | 4.1 | 0.8 |
| Sales to all other customers | 4.3 | 5.4 |
| Total net sales | $8.4 | $15.1 |

### Cost of Sales and Gross Margin

Our cost of sales for the three months ended September 30, 2010 decreased by $6.7 million to $5.8 million, or 54%, from $12.5 million for the same period in fiscal 2010. The decrease in the cost of sales was principally due to the impact of the $8.9 million inventory transfer to our largest customer in the prior year period. Without the inventory transfer, the cost of sales would have increased due to the impact of higher manufacturing activity as a result of increased shipments to customers. Gross profit was $2.6 million or 31% of net sales compared with $2.6 million or 17% of net sales for the three month periods ended September 30, 2010 and 2009, respectively. The improvement in gross profit over the prior year is due to improved capacity utilization during the quarter ended September 30, 2010. The primary driver for the improvement in capacity utilization was increased production for the Company’s largest customer, GT Solar, during the three months ended September 30, 2010 compared to almost no production for that customer during the corresponding prior year period. The non-recurring inventory transfer completed in August 2009 carried a gross margin that was lower than we generally obtain for our processing services and therefore reduced overall gross margin for the quarter ending September 30, 2009.

### Operating Expenses

Our payroll and related costs were $506,582 for the three months ended September 30, 2010 as compared with $331,302 for the three months ended September 30, 2009. The 53% or $175,280 increase in payroll and related costs was due to a return to full staffing levels at Ranor driving an increase of $57,825 as well as executive and business development headcount increases at the corporate level contributing to an increase of $117,455 compared with lower staffing levels during the second quarter of the prior year.

Professional fees increased to $167,094 for the three months ended September 30, 2010 from $110,411 for the three months ended September 30, 2009. This increase of $56,683 or 51% was primarily attributable to an increase in legal costs associated with SEC filings, employment agreements, amendments to the Company’s stock option plan and investigation and structuring of a strategic initiative.

Selling, administrative and other expenses for the three months ended September 30, 2010 were $447,735 compared to $226,573 for three months ended September 30, 2009, representing an increase of $221,162 or 98% over the prior year. The increase was due primarily to consulting fees incurred in the Company’s search efforts for a full time CEO and an independent board of director. Both of these search efforts were concluded during the quarter ended September 30, 2010.

### Interest Expense

Interest expense increased by 3% for the three months ended September 30, 2010 to $110,450 compared with $107,390 for the three months ended September 30, 2010 due to slightly higher average levels of long-term debt during the period.

### Income Taxes

For the three months ended September 30, 2010, the Company recorded tax expense of $502,014 compared with a tax expense for Federal and state income tax of $550,388 in the comparable period last year. The estimated annual effective income tax rate for the current fiscal year is 37%. The difference between the provision for income taxes and the income tax determined by applying the statutory federal income tax rate of 34% and state income tax rate of 8.75% was due primarily to differences in the lives and methods used to depreciate and/or amortize our property and equipment, deductions for domestic production activities, timing differences of expenses related to share based compensation and the expected utilization of net operating loss carryforwards.

### Net Income

As a result of the foregoing, our net income was $855,628 or $0.06 and $0.04 per share basic and diluted, respectively, for the three months ended September 30, 2010, as compared to net income of $1,320,634 or $0.09 per share basic and $0.06 fully diluted for the three months ended September 30, 2009.

### Six Months Ended September 30, 2010 and 2009

The following table sets forth information from our statements of operations for the three months ended September 30, 2010 and 2009, in dollars and as a percentage of revenue (dollars in thousands):

|  | 2010 Amount | Percent | 2009 Amount | Percent | Changes Six Months Ended September 30, 2010 to 2009 Amount | Percent |
| --- | ---: | ---: | ---: | ---: | ---: | ---: |
| Net sales | $14,535 | 100% | $18,436 | 100% | $(3,901) | (21)% |
| Cost of sales | 9,634 | 66% | 15,225 | 83% | (5,591) | (37)% |
| Gross profit | 4,901 | 34% | 3,211 | 17% | 1,690 | 53% |
| Payroll and related costs | 907 | 6% | 725 | 4% | 182 | 25% |
| Professional expense | 345 | 3% | 187 | 1% | 158 | 84% |
| Selling, general and administrative | 888 | 6% | 525 | 3% | 363 | 69% |
| Total operating expenses | 2,140 | 15% | 1,437 | 8% | 703 | 49% |
| Income from operations | 2,761 | 19% | 1,774 | 10% | 987 | 56% |
| Interest expense | (218) | (1)% | (212) | (1)% | 6 | 3% |
| Other income (expense) | 65 | -% | 1 | -% | 64 | -% |
| Income before income taxes | 2,608 | 18% | 1,563 | 9% | 1,045 | 67% |
| Income tax expense | 933 | 7% | 367 | 2% | 566 | 154% |
| Net income | $1,675 | 11% | $1,196 | 7% | $479 | 40% |

### Net Sales

Net sales decreased by $3.9 million, or 21%, to $14.5 million for the six months ended September 30, 2010. However, sales to the Company’s largest customer during the second quarter ended September 30, 2009, included an $8.9 million inventory transfer triggered by that customer’s April 2009 cancellation of its then open purchase orders. Sales without this one-time inventory transfer in the prior year increased by $5 million or 53% to $14.5 million from $9.5 million on a comparative basis, primarily driven by higher demand in markets served by the Company’s largest customer. We believe that such an adjustment is useful because the inventory transfer completed during the quarter ended September 30, 2009 is unlikely to recur in the near term. Sales to the Company’s largest customer during the six month period ended September 30, 2010 were $7.8 million compared to $0.8 million during the comparable six month period ended September 30, 2009. The table below highlights components of net sales for the six month periods ending September 30, 2010 and 2009 (dollars in millions):

|  | 2010 | 2009 |
| --- | ---: | ---: |
| Inventory transfer to largest customer | $-- | $8.9 |
| Other sales to largest customer | 7.8 | 0.8 |
| Sales to all other customers | 6.7 | 8.7 |
| Total Net sales | $14.5 | $18.4 |

### Cost of Sales and Gross Margin

Our cost of sales for the six months ended September 30, 2010 decreased by $5.6 million or 37% to $9.6 million from $15.2 million for the comparative period in fiscal 2010. The decrease in the cost of sales was principally due to the impact of the $8.9 million inventory transfer to our largest customer in the prior year. Excluding the inventory transfer, the cost of sales would have increased by $3.2 million or 33% over the prior year. Gross profit was $4.9 million or 34% of net sales compared with $3.2 million or 17% of net sales for the six month periods ended September 30, 2010 and 2009, respectively. The improvement in gross profit over the prior year is due to improved capacity utilization during the six month period ended September 30, 2010. The primary driver for the improvement in capacity utilization was increased production for the Company’s largest customer, GT Solar, during the six months ended September 30, 2010 compared to almost no production for that customer during the corresponding prior year period. The inventory transfer, which was completed in August 2009, carried a gross margin that was lower than we generally obtain for our processing services and therefore reduced overall gross margin for the six month period ending September 30, 2009.

### Operating Expenses

Our payroll and related costs were $906,593 for the six months ended September 30, 2010 as compared with $724,669 for the six months ended September 30, 2009. The $181,924 or 25% increase in payroll and related costs was due primarily to increased headcount in the executive and business development functions and a return to full staffing levels at Ranor during fiscal year 2011.

Professional fees increased to $344,744 for the six months ended September 30, 2010 from $186,623 for the six months ended September 30, 2009. The increase of $158,120 or 84% was primarily attributable to an increase in legal costs associated with SEC filings, employment agreements, stock option plan changes and due diligence costs on a strategic opportunity.

Selling, general, and administrative expenses for the six months ended September 30, 2010 were $888,018 compared to $524,994 for six months ended September 30, 2009, an increase of $363,024 or 69%. Primary components of the increase were $239,000 in consulting expenses in connection with our CEO and board of directors search efforts which concluded during the second quarter of fiscal 2011 and $97,412 of share based compensation expense related to stock options vesting during the six month period ended September 30, 2010.

### Income Taxes

For the six months ended September 30, 2010, the Company recorded tax expense of $933,116 compared with a recorded tax expense for Federal and state income tax of $366,703 in the comparable periods last year. The estimated annual effective income tax rate for the current fiscal year is 37.3%. The difference between the provision for income taxes and the income tax determined by applying the statutory federal income tax rate of 34% and the state income tax rate of 8.75% was due primarily to differences in the lives and methods used to depreciate and/or amortize our property and equipment, deductions for domestic production activities, timing differences of expenses related to share based compensation and the expected utilization of net operating loss carryforwards.

### Net Income

As a result of the foregoing, our net income was $1.7 million or $0.12 and $0.08 per share basic and fully diluted, respectively, for the six months ended September 30, 2010, as compared to net income of $1.2 million or $0.09 per share basic and $0.06 fully diluted for the six months ended September 30, 2009.

### Liquidity and Capital Resources

At September 30, 2010, we had working capital of $14.6 million as compared with working capital of $13.3 million at March 31, 2010, representing an increase of $1.3 million or 9%. The following table sets forth information as to the principal changes in the components of our working capital:

*(dollars in thousands)*

|  | September 30, 2010 | March 31, 2010 | Change Amount | Percentage Change |
| --- | ---: | ---: | ---: | ---: |
| Cash and cash equivalents | $9,236 | $8,774 | $462 | 5% |
| Accounts receivable, net | 2,756 | 2,693 | 63 | 2% |
| Costs incurred on uncompleted contracts | 4,333 | 2,750 | 1,583 | 58% |
| Raw material inventories | 232 | 299 | (67) | (23)% |
| Other current assets | 341 | 404 | (63) | (16)% |
| Deferred tax asset | 314 | 304 | 10 | 3% |
| Accounts payable | 951 | 445 | 506 | 114% |
| Accrued expenses | 561 | 621 | (60) | (10)% |
| Current maturity of long-term debt | 813 | 809 | 4 | --% |
| Progress billings in excess of cost of uncompleted contracts | 279 | 56 | 223 | 395% |

Cash provided by operations was $1.1 million for the six months ended September 30, 2010 as compared with cash used in operations of $1.4 million for the six months ended September 30, 2009. The increase in cash flows from operations is primarily the result of an increase in net income, deferred taxes and share based compensation when compared to the same period in the last fiscal year. An increase in manufacturing activity also led to a higher balance of costs allocable to undelivered units incurred on uncompleted projects during the period. Accounts payable and deferred revenue have increased since March 31, 2010 reflecting an increase in manufacturing activity and purchases during the period.

We invested $720,071 in new equipment and received proceeds of $60,000 from the sale of equipment during the six months ended September 30, 2010. On January 8, 2010, the Company issued a purchase order for the purchase of a gantry mill totaling $2.3 million. The Company made its first payment in fiscal 2010 and its second payment of $695,520 in the period ended September 30, 2010. The Company is committed to make one more payment during fiscal 2011, with final payment due upon delivery which is anticipated to occur during the fourth quarter of fiscal 2011. The Company intends to borrow up to 80% of the purchase price in order to finance this purchase. This purchase commitment represents an investment necessary to refresh and upgrade the Company’s fleet of manufacturing equipment and capabilities.

Net cash provided by financing activities was $66,511 for the period ended September 30, 2010 as compared with net cash provided by financing activities of $521,042 for the period ended September 30, 2009. The Company borrowed nearly $1 million under its capital expenditure facility in the prior year to finance equipment placed in service during the prior year. We paid down $405,993 of principal on our debt and capital lease obligations during the six months ended September 30, 2010, and our consolidated VIE WM Realty distributed $93,748 to its partners. During the second quarter, we borrowed an additional $556,416 under a capital equipment line of credit to finance the second payment due on the gantry mill noted above.

All of the above activity resulted in a net increase in cash of $0.5 million for the six months ended September 30, 2010 compared with a $0.9 million cash decrease for the six months ended September 30, 2009.

### Debt Facilities

At September 30, 2010, WM Realty had an outstanding mortgage of $3.1 million on the real property that it leases to Ranor. The mortgage has a term of ten years, maturing November 1, 2016; bears interest at 6.85% per annum; and provides for monthly payments of principal and interest of $20,955. The monthly payments are based on a thirty-year amortization schedule, with the unpaid principal being due in full at maturity. WM Realty has the right to prepay the mortgage note upon payment of a prepayment premium of 5% of the amount prepaid if the prepayment is made during the first two years, and declining to 1% of the amount prepaid if the prepayment is made during the ninth or tenth year.

We have a loan and security agreement with Sovereign Bank, dated February 24, 2006, pursuant to which we borrowed $4.0 million on a term loan basis in connection with our acquisition of Ranor. As a result of amendments to the loan and security agreement, we added a $2.0 million revolving credit facility, which was renewed on July 30, 2010 for an additional one-year term. At September 30, 2010 there were no borrowings under the revolving note and maximum available under the borrowing formula was $2.0 million.

The term note issued on February 24, 2006 has a term of seven years with an initial fixed interest rate of 9%. The interest rate on the term note converts from a fixed rate of 9% to a variable rate on February 28, 2011. From February 28, 2011 until maturity the term note will bear interest at the prime rate plus 1.5%, payable on a quarterly basis. Principal is payable in quarterly installments of $142,857 plus interest, with a final payment due on March 1, 2013. The balance outstanding on the term note as of September 30, 2010 and March 31, 2010 was $1.4 million and $1.7 million, respectively.

The term note is subject to various covenants that include the following: the loan collateral comprises all personal property of the Company, including cash, accounts receivable inventories, equipment, financial and intangible assets. The Company must also maintain a ratio of earnings available to cover fixed charges of at least 120% of the fixed charges for the rolling four quarters, tested at the end of each fiscal quarter. Additionally, we must maintain an interest coverage ratio of at least 2.1 at the end of each fiscal quarter. Ranor’s obligations under the notes to the bank are guaranteed by TechPrecision.

As of September 30, 2010, the Company was in compliance with all debt covenants as the ratio of earnings available to cover fixed charges was 205% and the interest coverage ratio was 9:1 at September 30, 2010. In the event of default (which default may occur in connection with a non-waived breach), the lending bank may choose to accelerate payment of any amounts outstanding under the Term Note and, under certain circumstances, the bank may be entitled to cancel the facility. If the Company were unable to obtain a waiver for a breach of covenant and the bank accelerated the payment of any outstanding amounts, such acceleration may cause the Company’s cash position to deteriorate or, if cash on hand were insufficient to satisfy any payment due, may require the Company to obtain alternate financing to satisfy any accelerated payment obligation.

We also had a $3.0 million capital expenditure facility which was available until November 30, 2009. The capital expenditure facility was not renewed upon its expiration on November 30, 2009 as the Company intends to finance future equipment purchases on a specific item basis. We paid interest only on borrowings under the capital expenditures line until November 30, 2009, at which time the principal balance is amortized over five years, commencing December 31, 2009. The interest on borrowings under the capital expenditure line was equal to the prime rate plus 0.5% through and including November 30, 2009 and thereafter at LIBOR, plus 3%. Any unpaid balance on the capital expenditures facility is to be paid on November 30, 2014. As of September 30, 2010, there was $750,759 outstanding under this facility.

Under a Staged Advance Facility, the bank may loan to Ranor, during a one year period expiring on March 29, 2011, amounts up to $1,900,000 for the purpose of acquiring a gantry mill machine. The machine will serve as collateral for the loan. The total aggregate amount of advances under this agreement should not exceed 80% of the actual purchase price of the mill machine. All advances provide for payment of interest only monthly through February 28, 2011, and thereafter no further borrowings shall be permitted under this facility. The interest rate is LIBOR plus 4%. Beginning on April 1, 2011, Ranor is obligated to pay principal and interest sufficient to amortize the outstanding balance on a five year schedule. On March 29, 2010 and September 30, 2010, Ranor drew down equal amounts of $556,416 under this facility to finance the purchase of the gantry mill machine. TechPrecision has guaranteed the payment and performance from and by Ranor.

We believe that the $2.0 million revolving credit facility, which was renewed on July 30, 2010, and remained unused as of September 30, 2010; our capacity to access equipment-specific financing; our current cash balance of $9.2 million; and our cash flow from operations should be sufficient to enable us to satisfy our cash requirements at least through the end of fiscal 2011. Nevertheless, it is possible that we may require additional funds to the extent that we upgrade or expand our manufacturing facilities.

The securities purchase agreement pursuant to which we sold the Series A Convertible Preferred Stock to Barron Partners provides Barron Partners with a right of first refusal on future equity financings, which may affect our ability to raise funds from other sources if the need arises.

In the event that we make an acquisition, we may require additional financing for the acquisition. We have no commitment from any party for additional funds, however, the terms of our agreement with Barron Partners, particularly Barron Partners’ right of first refusal, may impair our ability to raise capital in the equity markets to the extent that potential investors would be reluctant to negotiate a financing when another party has a right to match the terms of the financing. We have no off-balance sheet assets or liabilities.

## Controls and procedures

As filed, 2,032 characters.

### Evaluation of Disclosure Controls and Procedures

As of September 30, 2010, we carried out an evaluation, under the supervision and with the participation of management, including our chief executive officer and chief financial officer, of the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rule 13a-15(e) under the Securities Exchange Act of 1934 (Exchange Act)).

Disclosure controls and procedures are designed to ensure that information required to be disclosed is recorded, processed, summarized and reported, within the time periods specified in SEC rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed is accumulated and communicated to the issuer’s management, including its principal executive and principal financial officers, or persons performing similar functions, as appropriate to allow timely decisions regarding required disclosure

Based upon that evaluation, our chief executive officer and chief financial officer concluded that our disclosure controls and procedures were effective as of September 30, 2010, to provide reasonable assurance that information required to be disclosed by the Company in reports filed or submitted under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms and is accumulated and communicated to management, including our chief executive officer and chief financial officer, as appropriate to allow timely decisions regarding required disclosure.

### Changes in Internal Controls

During the three months ended September 30, 2010, there were no changes in our internal control over financial reporting identified in connection with the evaluation required by paragraph (d) of Rule 13a-15 that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

Filed Nov 15, 2010.
Source: SEC EDGAR, the filing index for accession 0001213900-10-004795. Last ingested by Listed: Nov 10, 2026, 04:27 ET. No prices; not investment advice.
