# Focus Universal Inc.: Form 10-Q for the period ended Mar 31, 2021

- Company: [Focus Universal Inc.](/companies/fcuv.md) (CIK 1590418)
- Form: 10-Q
- Filed: 2021-05-10
- Accepted by EDGAR: May 10, 2021, 17:17 ET
- Period: 2021-03-31
- Accession: 0001683168-21-001866
- Inline XBRL: yes
- Main document: https://www.sec.gov/Archives/edgar/data/1590418/000168316821001866/focus_10q-033121.htm
- All documents and exhibits: https://www.sec.gov/Archives/edgar/data/1590418/000168316821001866/

## Figures reported in this filing

Standardized XBRL line items for the period ended 2021-03-31.

| Line item | Period | Value | XBRL concept |
| --- | --- | ---: | --- |
| Revenue | 3 months, 2021-01-01 to 2021-03-31 | $363.5k | us-gaap:Revenues |
| Cost of revenue | 3 months, 2021-01-01 to 2021-03-31 | $292.3k | us-gaap:CostOfRevenue |
| Gross profit | 3 months, 2021-01-01 to 2021-03-31 | $71.2k | us-gaap:GrossProfit |
| Research and development | 3 months, 2021-01-01 to 2021-03-31 | $63.1k | us-gaap:ResearchAndDevelopmentExpense |
| Operating income | 3 months, 2021-01-01 to 2021-03-31 | −$719.2k | us-gaap:OperatingIncomeLoss |
| Income tax | 3 months, 2021-01-01 to 2021-03-31 | $0 | us-gaap:IncomeTaxExpenseBenefit |
| Net income | 3 months, 2021-01-01 to 2021-03-31 | −$682.5k | us-gaap:NetIncomeLoss |
| Operating cash flow | 3 months, 2021-01-01 to 2021-03-31 | −$438.8k | us-gaap:NetCashProvidedByUsedInOperatingActivities |
| Cash and equivalents | at 2021-03-31 | $1.9m | us-gaap:Cash |
| Current assets | at 2021-03-31 | $2.3m | us-gaap:AssetsCurrent |
| Total assets | at 2021-03-31 | $6.9m | us-gaap:Assets |
| Current liabilities | at 2021-03-31 | $762.5k | us-gaap:LiabilitiesCurrent |
| Total liabilities | at 2021-03-31 | $2.6m | us-gaap:Liabilities |
| Shareholders' equity | at 2021-03-31 | $4.2m | us-gaap:StockholdersEquity |

## Management's discussion and analysis

As filed, 37,072 characters.

The following discussion of our financial condition and results of operations should be read in conjunction with, and is qualified in its entirety by, the consolidated financial statements and notes thereto included in, Item 1 in this Quarterly Report on Form 10-Q. This item contains forward-looking statements that involve risks and uncertainties. Actual results may differ materially from those indicated in such forward-looking statements.

### Forward-Looking Statements

This Quarterly Report on Form 10-Q and the documents incorporated herein by reference contain forward-looking statements. Such forward-looking statements are based on current expectations, estimates, and projections about our industry, management beliefs, and certain assumptions made by our management. Words such as “anticipates,” “expects,” “intends,” “plans,” “believes,” “seeks,” “estimates,” variations of such words, and similar expressions are intended to identify such forward-looking statements. These statements are not guarantees of future performance and are subject to certain risks, uncertainties, and assumptions that are difficult to predict; therefore, actual results may differ materially from those expressed or forecasted in any such forward-looking statements. Unless required by law, we undertake no obligation to update publicly any forward-looking statements, whether as a result of new information, future events, or otherwise. However, readers should carefully review the risk factors set forth herein and in other reports and documents that we file from time to time with the Securities and Exchange Commission, particularly the Report on Form 10-K, Form 10-Q and any Current Reports on Form 8-K.

### Narrative Description of the Business

Focus Universal Inc. (the “Company,” “we,” “us,” or “our”) is a Nevada corporation. We have developed four fundamental disruptive proprietary technologies which we believe solve the most fundamental problems plaguing the internet of things (“IoT”) industry through: (1) increasing overall chip integration by shifting it to the device level; (2) creating a faster 5G cellular technology by using Ultra-narrowband technology; (3) leveraging ultra-narrowband power line communication (“PLC”) technology; and (4) User Interface Machine auto generation technology. Our Universal smart technology is designed to overcome instrumentation interoperability and interchangeability. The electronic design starts from a 90% completed common foundation we call our universal smart instrumentation platform (“USIP”), instead of the current method of building each stand-alone instrument from scratch. Our method eliminates redundant hardware and software and results in significant cost savings and production efficiency. We have developed software machine auto generation technology to replace the manual software designs which are currently in use and cannot satisfy the exponential growth of future IoT industry demand. Our ultra-narrowband PLC enables our users to send data over existing electricity power cables and immediately establish a ubiquitous data network without substantial new investment for a dedicated wiring infrastructure. Our ultra-narrow band technology is capable of overcoming the noise problems communicating through power lines that have hindered our competitors for over a century. Our wireless communication technology allows for longer-range coverage, is more energy effective and has much faster data sending speeds than the current 5G technology speeds being used. We also provide sensor devices and are a wholesaler of various air filters and digital, analog, and quantum light meter systems.

For the three months ended March 31, 2021 and 2020, we generated significant amount of our revenue from sales of a broad selection of agricultural sensors and measurement equipment which is currently our primary business.

### Our Current Products Include:

Products we are currently selling

We are also a wholesaler of various digital, analog, and quantum light meters and filtration products, including fan speed adjusters, carbon filters and HEPA filtration systems. We source these products from manufacturers in China and then sell them to a major U.S. distributor, Hydrofarm, who resells our products directly to consumers through retail distribution channels and in some cases, places its own branding on our products.

Specifically, we sell the following products:

*Fan speed adjuster device*. We provide a fan speed adjuster device to our client Hydrofarm. Designed specifically for centrifugal fans with brushless motors, our adjuster device helps ensure longer life by preventing damage to fan motors by adjusting the speed of centrifugal fans without causing the motor to hum. These devices are rated for 350 watts max, have 120VAC voltage capacity and feature an internal, electronic auto-resetting circuit breaker.

Our Fan Speed Adjuster Device

*Carbon filter devices.* We sell two types of carbon filter devices to our client Hydrofarm. These carbon filter devices are professional grade filters specifically designed and used to filter air in greenhouses that might be polluted by fermenting organics. One of these filters can be attached to a centrifugal fan to scrub the air in a constant circle or can be attached to an exhaust line as a single pass filter, which moves air out of the growing area and filters unwanted odors and removes pollens, dust, and other debris in the air. The other filter is designed to be used with fans from 0-6000 C.F.M.

Our Carbon Filter Device

*HEPA filtration device.* We provide a high-efficiency particulate arrestance (“HEPA”) filtration device at wholesale prices to our client Hydrofarm. Manufactured, tested, certified, and labeled in accordance with current HEPA filter standards, this device is targeted towards greenhouses and grow rooms and designed to keep insects, bacteria, and mold out of grow rooms. We sell these devices in various sizes.

Our HEPA Filtration Device

*Digital light meter.* We provide a handheld digital light meter that is used to measure luminance in fc units, or foot-candles.

Our Digital Light Meter Device

*Quantum par meter*. We provide a handheld quantum par meter used to measure photosynthetically active radiation (“PAR”). This fully portable handheld PAR meter is designed to measure PAR flux in wavelengths ranging from 400 to 700 nm. It is designed to measure up to 10,000 µmol.

Our Quantum Par Meter Device

#### Strategy behind the AVX Acquisition

On March 15, 2019, the Company completed a transaction with Patrick Calderone to purchase 100% of the outstanding stock of AVX, an IoT installation and management company based in southern California.

Through our acquisition of AVX, we are planning to offer ordinary families an entire smart home product line at a fraction of the current market price. We have finished the design of smart lighting control, air conditioner, sprinkler, garden light control, garage door control and heating control. We are developing a swimming pool control device, smoke detector and carbon monoxide monitor. We believe these product lines could be completed by the end of 2021.

#### Ubiquitor Wireless Universal Sensor Device

Our USIP technology is an advanced software and hardware integrated instrumentation platform that uses a large-scale modular design approach. The large-scale modular design approach subdivides instruments into a foundation component (a USIP) and architecture-specific components (sensor nodes), which together replaces the functions of traditional instruments at a fraction of their cost. The USIP has an open architecture, incorporating a variety of individual instrument functions, sensors, and probes from different industries and vendors. The platform features the ability to connect potentially thousands of different sensors or probes, addressing major limitations present in traditional instrumentation systems. We believe the platform represents a technological advancement in the IoT marketplace by integrating large numbers of technologies, including cloud technology, wired and wireless communication technology, software programming, instrumentation technology, artificial intelligence, PLC, and sensor networking into a single platform. The result of such integration is a smaller, cheaper and faster circuit system design than those currently offered in the instrumentation market.

The USIP, which is compatible with a significant percentage of the instruments currently manufactured, consists of universal and reusable hardware and software. The universal hardware in the USIP is (i) a smartphone, computer, or any mobile device capable of running our software that includes a display and either hardware controls or software control surfaces, and (ii) our Ubiquitor, which is designed to be the universal data logger that acts as a bridge between the computer or mobile device and the sensor nodes. We call our flagship USIP device the “Ubiquitor” due to its ability to measure and test a variety of electrical and physical phenomena such as voltage, current, temperature, pressure, sound, light, and humidity—both wired and wirelessly.

We have created and assembled prototype models of the Ubiquitor in limited quantities and plan to expand our assembly in 2021. Our prototype Ubiquitor is compatible with standard desktop computers running either Windows OS or MacOS and Android- or iOS-based mobile devices and acts as a conduit that communicates with a group of sensors or probes manufactured by different vendors in a manner that requires the user to have little or no knowledge of their unique specifications. The data readout is displayed on the computer or mobile device display in application software we have created for use with a Windows PC and are creating for use with a Mac. We are designing the application software (the “App”) to have a graphical representation of control and indicator elements common in traditional tangible instruments, such as knobs, buttons, dials, and graphs, etc. Utilizing the Ubiquitor and the App, users and instrument manufacturers will be free to add, remove or change a sensor module for their special industrial or educational application without needing to create their own application software and design their own hardware. Our developers are designing and implementing a soft control touch screen interface that supports real-time data monitoring and facilitates instrument control and operation.

Recently, the Company has devoted a substantial number of resources to research and development to bring the Ubiquitor and its App to full production and distribution. We anticipate that the sales and marketing involved with bringing the Ubiquitor to market will require us to hire a number of new employees in order to gain traction in the market. We intend to introduce the Ubiquitor in smart home installations to reduce costs and increase functionality, as well as implement the Ubiquitor device in greenhouses and other agricultural warehouses that require regulation of light, humidity, moisture, and other measurable scientific units required to create optimal growing conditions.

Our universal smart development protocol focuses not only on the design of the hardware and software modules but also on the design of the overall universal smart instruments system, guided by the principles of structure, universality and modularity.

Our Ubiquitor device is a fully modular system with a universal sensor node and gateway system that uses a computer or mobile device as the output display module responsible for displaying the readings of various sensor nodes. We have completed an initial production run of prototype Ubiquitor devices and intend to proceed into full-scale production. The Ubiquitor’s sensor analytics system integrates event-monitoring, storage and analytics software in a cohesive package that provides a holistic view of the sensor data it is reading.

The physical hardware consists of:

1\. The sensor nodes, which come in hundreds of different varieties of sensor instruments in the form of a USB stick, with both male and female ports; and

2\. The Ubiquitor as the main hardware gateway, which is a small cell phone-sized device with integrated circuits.

We believe the Ubiquitor device can connect up to thousands of potential sensor nodes, and integrate data using embedded software to display the data and all analytics onto a digital screen (desktop, smartphone or mobile device displays) using a Wi-Fi connection. As disclosed in our patent application, we have already tested up to 256 sensor instrument readouts. Most types of nodes and probes can connect to the hardware. If the sensor size is bigger than the standard probe size, it is possible to simply use a USB cable to connect the probe and the hub. All data and analytics are displayed on a single screen, with tools that record and keep track of all measurements, and sort and display analytic information in easy-to-read charts.

The Ubiquitor is a general platform that collects data in real time, up to 100 Hz per second; and thus, is intended to be adapted to many industrial uses.

By using the universal hardware or USIP, we believe we could achieve the following efficiencies in instrumentation systems:

1\. **Cut production costs.** Smartphone technology is widely used on the small sensor device market. By utilizing smartphone technology, the Ubiquitor will add superior functionality and performance, improve the product’s quality and cut production costs.

2\. **Reduce the effort required to develop a new sensor product.** With the Ubiquitor, we believe that there will be no need for device manufacturers to research and develop new monitoring and operating components because they will just need to develop new sensor nodes or probes that may be integrated into our software technology.

3\. **Reduce clutter.** It is anticipated that the Ubiquitor could dispense with some of the hassle of connecting cables, since the Ubiquitor allows wireless transmission of sensor data and may allow wireless access to networks, such as a PLC network.

We have not yet started research and development of a second generation Ubiquitor device, but once we demonstrate the market for this product, we intend to begin such research and development. Currently our research and development is focused on concepts we can implement in the current first generation Ubiquitor device.

### Research and Development Efforts of Power Line Communication

Power Line Communication (“PLC”) is a communication technology that enables sending data over existing power cables. One advantage of this technology is that PLC does not require substantial new investment for its communications infrastructure. Rather, PLC utilizes existing power lines, thereby forming a distribution network that already penetrates all residential, commercial and industrial premises. Accordingly, connectivity via PLC is potentially the most cost-effective, scalable interconnectivity approach for the IoT. We believe PLC can be an integral part of our communication infrastructure for the IoT, which enables reliable, real-time measurements, monitoring and control. A large variety of appliances may be interconnected by transmitting data through the same wires that provide electrical energy.

Wireless networks allow multiple users to access large amounts of information without the hassle of running wires to and from each IoT device (See “Risk Factors” above). The 5G cellular network, for example, promises exciting advances for telecommunication service providers, but the implementation of the 5G network will be challenging. The implementation will require building out dense, low-latency edge networks in ways that are affordable, secure and easily maintainable. 5G antennas will be able to handle more users and to transmit more data, but they will have a shorter transmission range. 5G networks will also require frequencies of up to 300 GHz. This requirement means wireless carriers will need to bid for the costly higher spectrum bands to roll out their respective 5G networks. Generally speaking, wireless networks are typically slower and more expensive than existing wired networks and extremely susceptible to interference from radio signals, radiation, walls and other forms of interference. Additionally, wireless networks may be accessed by any device within range of the network’s signal, making the information transmitted on a wireless network susceptible to access by unauthorized recipients. We are currently developing a wired alternative to wireless networks that utilizes installed power lines to transmit information. Our PLC technology uses an ultra-narrow band spectrum channel of less than 1 KHz to establish a long-distance link between transmitter and receiver. Thus, we believe that our proprietary ultra-narrow band PLC technology will offer a promising alternative to wireless networks and provide the backbone communication infrastructure for IoT devices.

PLC has been around for many years, leading some to believe that it is a mature technology. Current leaders in the industry include Siemens (Germany), Netgear (US), ABB (Switzerland), Ametek (US), Schneider Electric (France), General Electric (US), TP-Link Technologies (China), D-Link (Taiwan), Landis+Gyr (Switzerland), and Nyx Hemera Technologies (Canada).

The primary design goal of the power line network is electric power distribution, not data transmission. Consequently, although PLC is an established technology, the harsh electrical noise present on power lines and variations in equipment and standards make communications over the power grid difficult and present a number of fundamental challenges for data transfer. Signals propagating along the power line are subjected to very large amounts of noise, attenuation, and distortion that make them erratic, with several attributes varying over time. PLC is susceptible to noise from devices linked to the power supply infrastructure, for example, fluorescent tube lights, drills, hair dryers, microwave ovens, computers, switch mode power supply, cellphone chargers, dimmers, refrigerators, televisions, washing machines, and vacuum cleaners. All the trials of PLC technology appear to have resulted in power companies and internet service providers deciding that the technology is not viable as a means of delivering broadband internet access. These technological challenges have impeded, or even halted, progression of PLC technology.

We are performing research and development with the intention of inventing our own ultra-narrow band PLC technology that attempts to tackle two challenges: 1) overcoming interference caused by electronic noise on the power line system; and 2) bandwidth. Preliminary internal testing suggests that we have achieved noise rejection and interference suppression at five orders of magnitude better than traditional PLC technology. We believe our ultra-narrow band PLC technology shows robustness against noise and interference, based on our internal testing where we found no detectable interference occurring when six industrial blowers, notorious for causing electrical noise, and a large air conditioning unit were connected to an electrical line passing a control signal. By comparison, a small air dryer is able to cause interference in legacy PLC systems. State of the art PLC technologies developed by other companies may offer sufficient bandwidth, but they cannot effectively deal with the interference of electric noise on the system. However, in our preliminary internal testing, we have been able to increase bandwidth to 4 megabits per second with the potential for more, while simultaneously effectively dealing with electrical noise and interference. Furthermore, such data transfer rates were delivered at a bandwidth of less than 1000 Hz, thereby achieving a bandwidth efficiency (measured as bits per second per Hz) greater than 4000. For comparison purposes, 4G cellular networks have a bandwidth efficiency of less than 6 due to their requirement of larger bandwidth resources. The demand for bandwidth resources will only grow with the upcoming 5G and proposed 6G networks. Accordingly, further research of our PLC technology is warranted as it shows promise for increased data transfer rates at a lower cost than either of the 5G and proposed 6G networks, particularly given such networks’ requirements for costly new infrastructure and bandwidth resources. Based on the promising results of our internal testing, we have begun designing a proprietary PLC microchip and have set an intended launch date for 2021.

We believe that because residential and commercial structures already include multiple power outlets, the power line infrastructure represents an excellent network to share data among intelligent devices, particularly in the smart home installations that we are currently performing through AVX. Using PLC technology would mean that the requirement for costly ethernet cable networks to carry network information could be eliminated, as the same signals may be carried on the existing power lines.

We plan to leverage the communications technology of PLC to enhance the Ubiquitor and make the Ubiquitor a central component of the smart home and gardening systems we are currently developing. The goal would be that our Ubiquitor would be used to send or receive control signals from a smart device, and control hundreds of devices in near real time. We intend to apply the same concept to commercial and industrial applications.

Also, we plan to design a full line of products for the gardening industry by integrating the Ubiquitor device into a gardening system. The system would include a light control node, temperature sensor, humidity sensor, digital light sensor, quantum PAR sensor, pH sensor, total dissolved solids (“TDS”) sensor and carbon dioxide sensor design. We believe the combination of these sensors would offer the same features as a combination of dozens or even hundreds of different instruments in the gardening industry. The Ubiquitor would be used to replace these devices and could offer another case study of the effectiveness of the application of universal smart technology to such systems.

The development of universal smart instruments and the IoT have a considerable amount of overlap, with the only difference being the number of sensor nodes involved. We plan to take advantage of this overlap and unify universal smart instruments and the IoT into a single system, building the IoT infrastructure for both residential and commercial uses and charging monthly subscription fees. End users will be able to plug any peripheral devices into the power outlet and enjoy the IoT connectivity throughout their home.

Eventually, we hope to establish five divisions to bring our technology together: 1) AVX with new shared distributed smart home products powered by the Ubiquitor; 2) an IT division in software machine design; 3) Universal Smart Instrumentation; 4) PLC; and 5) an IoT division.

#### Intellectual Property Protection

On November 4, 2016, we filed a U.S. patent application number 15/344,041 with the USPTO. On March 5, 2018, we issued a press release announcing that the USPTO published an Issue Notification for U.S. Patent Application No. 9924295 entitled “Universal Smart Device,” which covers a patent application regarding the Company’s Universal Smart Device. The patent was issued on March 20, 2018.

Subsequent to our internal research and development efforts, we filed with the USPTO on June 2, 2017 a patent application regarding a process for improving a spectral response curve of a photo sensor. The small and cost-effective multicolor sensor and its related software protected by the patent we believe could achieve a spectral response that approximates an ideal photo response to take optical measurement. The patent was issued on February 26, 2019.

In addition, we have been notified that the USPTO published a notice of allowance for a patent application we filed on March 12, 2018 as application No. 15/925,400. The patent title is a “Universal Smart Device,” which is a universal smart instrument that unifies heterogeneous measurement probes into a single device that can analyze, publish, and share the data analyzed. The issue fee was paid on March 14, 2019.

On November 29, 2019, the Company filed an international utility patent application filed through the patent cooperation treaty as application PCT/US2019/63880. In April 2020, the Company was notified that it received a favorable international search report from the International Searching Authority regarding this patent application, which patents the Company’s PLC technology. The World International Property Organization report cited only three category “A” documents, indicating that the Company’s application met both the novelty and non-obviousness patentability requirements. Consequently, the Company is optimistic that the patent covering the claims for its PLC technology will be issued in due course and will allow the Company to implement strong protections on the PLC technology worldwide.

#### Competitors

There are several competitors we have identified in the wireless sensor node industry, including traditional instruments or devices manufacturers such as Hanna Instruments and Extech Instruments.

Hach developed and launched the SC1000 Multi-parameter Universal Controller, a probe module for connecting up to 32 digital sensors or analyzers. However, their products are not compatible with smart phones yet; and we believe their price point is still prohibitive to consumers.

Monnit Corporation offers a range of wireless and remote sensors. Many of Monnit’s products are web-based wireless sensors that usually are not portable because of their power consumption. Also, the sensors’ real-time updates are slow; and we believe security of the web-based sensor data acquisition also may be a concern. In addition to purchasing the device, consumers usually have to pay monthly fees for using web-based services.

We are not trying to compete with traditional instruments or device manufacturers because we utilize our Ubiquitor device in conjunction with our smartphone application, which we believe will be a completely different product category.

#### Market Potential

We believe that wireless universal smart technology will play a critical role for traditional instrument manufacturers, as it is too expensive and difficult to develop for medium or smaller companies. The cost factor is the first consideration when deciding whether a company wants to develop smart wireless technologies and implement them in their products or use them in their field testing. We also hope to play a role in academic laboratories, particularly with smaller academic laboratories who are sensitive to price.

### Results of Operations

#### For the three months ended March 31, 2021 compared to the three months ended March 31, 2020

#### Revenue, Cost of Sales and Gross Profit

Our consolidated gross revenue for the three months ended March 31, 2021 and 2020 was $363,463 and $310,609, respectively, which included revenue from related parties of $10,191 and $14,672, respectively. Revenue for the three months ended March 31, 2021 increased $52,854 due to sales increase to new client of Perfecular, resulting in gross profit of $71,200 and gross loss of $27,463 for the three months ended March 31, 2021 and 2020, respectively.

#### Operating Costs and Expenses

The major components of our operating expenses for the three months ended March 31, 2021 and 2020 are outlined in the table below:

|  | For the three months ended March 31, 2021 | For the three months ended March 31, 2020 | Increase (Decrease) $ |
| --- | ---: | ---: | ---: |
| Selling expense | $512 | $15,070 | $(14,558) |
| Officer compensation | 39,100 | 34,000 | 5,100 |
| Research and development | 63,150 | 70,396 | (7,246) |
| Professional fees | 377,547 | 433,539 | (55,992) |
| General and administrative | 310,084 | 389,813 | (79,729) |
| Total operating expenses | $790,393 | $942,818 | $(152,425) |

Selling expense for the three months ended March 31, 2021 was $512, compared to $15,070 for the three months ended March 31, 2020. Selling expense incurred was mainly from third party advertising fees. The decrease of selling expense was due to a decrease in advertising fees.

Officer compensation was $39,100 and $34,000 for the three months ended March 31, 2021 and 2020, respectively. The increase was due to an adjustment of the Chief Financial Officer’s compensation.

Research and development costs were $63,150 and $70,396 for the three months ended March 31, 2021 and 2020, respectively. The decrease was due to additional supplies needed for the research and development work in 2020 which was no longer needed in 2021.

Professional fees were $377,547 during the three months ended March 31, 2021 compared to $433,539 during the three months ended March 31, 2020. The decrease was due stock option fee in 2021 compared to prior period.

General and administrative expenses of $310,084 incurred during the three months ended March 31, 2021 primarily consisted of salaries of $136,483, insurance expense of $42,579 and depreciation expense of $40,537. General and administrative expenses of $389,813 incurred during the three months ended March 31, 2020 primarily consisted of salaries of $147,621, insurance expense of $85,005 and depreciation expense of $40,596. The decrease was due to decreased salaries and insurance premiums. Salary expense decreased due to decrease number of employees. Insurance expenses decreased due to decrease health insurance and workers compensation insurance.

#### Net Losses

During the three months ended March 31, 2021 and 2020, we incurred net losses of $682,516 and $922,306 respectively, due to the factors discussed above.

### Liquidity and Capital Resources

#### Working Capital

|  | March 31, 2021 | December 31, 2020 |
| --- | ---: | ---: |
| Current Assets | $2,318,892 | $1,007,630 |
| Current Liabilities | (762,504) | (527,559) |
| Working Capital | $1,556,388 | $480,071 |

#### Cash Flows

The table below, for the periods indicated, provides selected cash flow information:

|  | For the three months ended March 31, 2021 | For the three months ended March 31, 2020 |
| --- | ---: | ---: |
| Net cash used in operating activities | $(438,775) | $(649,587) |
| Net cash used in investing activities | – | – |
| Net cash provided by (used in) financing activities | 1,763,697 | (50,000) |
| Net change in cash | $1,324,922 | $(699,587) |

### Cash Flows from Operating Activities

Our net cash outflows from operating activities of $438,755 for the three months ended March 31, 2021 was primarily the result of our net loss of $682,516 and changes in our operating assets and liabilities offset by the add-back of non-cash expenses. The change in operating assets and liabilities includes an increase in accounts receivable of $165,725, decrease in inventory of $20,975, decrease in prepaid expenses of $53,340, decrease in deposits of $100,000, increase in accounts payable and accrued liabilities of $142,464, decrease in accounts payable – related party of $17,471, and decrease in customer deposit of $53,450. Non-cash expense included add-backs of $8,357 in bad debt expense, $3,287 in reduction of inventory reserve, $40,537 in depreciation expense, net of $837 in amortization of right-of-use assets, $12,000 in stock-based compensation, and $106,838 in stock option compensation.

Our net cash outflows from operating activities of $649,587 for the three months ended March 31, 2020 was primarily the result of our net loss of $922,306 and changes in our operating assets and liabilities offset by the add-back of non-cash expenses. The change in operating assets and liabilities includes increase in accounts receivable of $94,161, increase of accounts receivable – related party of $23,977, increase in inventory of $14,437, decrease in prepaid expenses of $6,634, increase in accounts payable and accrued liabilities of $123,969, decrease in other current liabilities of $12,334, decrease in interest payable – related party of $1,750, and decrease in customer deposit of $22,984. Non-cash expense included add-backs of $189 in inventory reserve, $40,598 in depreciation expense, $12,000 in stock-based compensation, $259,350 in stock option compensation, and net of $378 in amortization of right-of-use asset.

We expect that cash flows from operating activities may fluctuate in future periods as a result of a number of factors, including fluctuations in our net revenues and operating results, utilization of new revenue streams, collection of accounts receivable, and timing of billings and payments.

### Cash Flows from Investing Activities

There were no investing activities for the three months ended March 31, 2021 and 2020.

### Cash Flows from Financing Activities

For the three months ended March 31, 2021 the Company obtained $267,297 in SBA loan, received $1,500,000 in bank loan, and repaid $3,600 in bank loan, resulting in cash inflow of $1,763,697. For the three months ended March 31, 2020 the Company paid off a promissory note, resulting cash outflow of $50,000.

#### Going Concern

In the long term, the continuation of the Company as a going concern is dependent upon the continued financial support from its shareholders, the ability of the Company to repay its debt obligations, to obtain necessary equity financing to continue operations, and the attainment of profitable operations. For the period ended March 31, 2021, the Company had a net loss of $682,516 and negative cash flow from operating activities of $438,775. In Q1, 2021 the Company has obtained a $1,500,000 loan from a financial institution and has a $1,500,000 loan commitment from a private related party. The loan from the financial institution requires monthly payments with the final payment due in 2026. The related party loan will accrue interest at 10% until March 15, 2022, or six months from the date the loan is funded, whichever is later (the “Initial Interest Accrual Date”). Interest on any unpaid principal after Initial Interest Accrual Date shall accrue at a fixed rate of 12% per annum until paid. The Company reserves the right to prepay this loan agreement (in whole or in part) after 6 months of the first day with no prepayment penalty. The Company may make, in its sole discretion, payments of interest only, or interest and principal, provided that the principal is not paid in full prior to six months from the date the loan is funded. The Company also plans to raise $10 million through an underwritten public offering in 2021.

With the January 1, 2021 beginning cash amount of $585,325 and the loan of $1,500,000, the Company will have enough cash to cover its projected annual cash burn rate of $1,967,074. With the additional $1,500,000 related party loan, the Company will have adequate reserves to continue operations in 2021 and 2022. The related party which will provide the loan to the Company is owned by a director of the Company, which we have evaluated to be a reliable source of cashflow. The $10 million planned public offering will contribute to a projected December 31, 2021 cash balance of $11,000,000. Historically, the Company has been successful in reaching planned its fund-raising targets.

In 2020 the Company had negative operating cashflow of approximately $1.96 million, mainly resulting from net loss. The Company is currently developing its products and licenses and expects to generate profit once the products and licenses available for the market, which will begin to alleviate the negative cashflow. Currently, the Company is testing 4 Mbps ultra-narrowband power line communication printed circuit boards, the testing is expected to complete in Q2 2021. The ultra-narrowband power line communication products will launch in Q4, 2021. The portable universal smart device is also in the final printed circuit board layout stage, the Company is planning to launch this product in Q4 2021. Initially, new products would require cash to manufacture and promote. The Company expects to begin generating positive cashflow with the launch of above-mentioned products from Q2 of 2022.

Overall, we expect that with the loan we obtained, along with the committed related-party loan, and planned capital raising will provide adequate cash for the Company to continue operation as a going concern throughout 2021 and 2022. The Company expects the loans and offering will generate cash for 2021’s operation and be able to pay off the loans obtained through the offering with sufficient cashflow for 2021 and 2022. Thus, the previous factors raising substantial doubt to continue as a going concern have been alleviated.

#### Off-Balance Sheet Arrangements

As of March 31, 2021, we did not have any off-balance-sheet arrangements, as defined in Item 303(a)(4)(ii) of Regulation SK.

## Market risk

As filed, 153 characters.

We are a smaller reporting company as defined by Rule 12b-2 of the Exchange Act and are not required to provide the information required under this item.

## Controls and procedures

As filed, 2,471 characters.

### Evaluation of Disclosure Controls

Under the supervision and with the participation of our management, including our principal executive officer and principal financial officer, we have conducted an evaluation of the effectiveness of the design and operation of our disclosure controls and procedures, as defined in Rules 13a15(e) and 15d15(e) under the Securities and Exchange Act of 1934, at the end of the period covered by this report. Based on this evaluation, our principal executive officer and principal financial officer concluded as of the evaluation date that our disclosure controls and procedures were effective such that the material information required to be included in our Securities and Exchange Commission reports is recorded, processed, summarized and reported within the time periods specified in SEC rules and forms relating to our company, particularly during the period when this report was being prepared.

Our management concluded we did not maintain effective controls over the Company’s financial reporting. The material weaknesses in our internal control over financial reporting, caused principally by inadequate staffing and technical expertise in key positions, resulted in overly relying on outside consultants to make numerous adjustments to our financial statements. Additionally, the significant deficiencies or material weaknesses could result in future material misstatement of the consolidated financial statements that would not be prevented or detected. Management has concluded that the identified control deficiencies constitutes a material weakness.

### Changes in internal control over financial reporting.

There were no changes in our internal control over financial reporting during our most recent fiscal quarter that materially affected, or were reasonably likely to materially affect, our internal control over financial reporting.

### Limitations on the Effectiveness of Internal Controls

Disclosure controls and procedures, no matter how well designed and implemented, can provide only reasonable assurance of achieving an entity's disclosure objectives. The likelihood of achieving such objectives is affected by limitations inherent in disclosure controls and procedures. These include the fact that human judgment in decision-making can be faulty and that breakdowns in internal control can occur because of human failures such as simple errors or mistakes or intentional circumvention of the established process.

## Risk factors

As filed, 163 characters.

We are a smaller reporting company as defined by Rule 12b-2 of the Securities Exchange Act of 1934 and are not required to provide the information under this item.

Filed May 10, 2021.
Source: SEC EDGAR, the filing index for accession 0001683168-21-001866. Last ingested by Listed: Nov 6, 2026, 18:15 ET. No prices; not investment advice.
