Listed

Heico Corp: Form 10-K for the period ended Oct 31, 2019

Filed with the SEC on Dec 19, 2019 and accepted by EDGAR at Dec 19, 2019, 16:35 ET.

Share

Business

As filed, 47,792 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

The Company

HEICO Corporation through its subsidiaries (collectively, “HEICO,” “we,” “us,” “our” or the “Company”) believes it is the world’s largest manufacturer of Federal Aviation Administration (“FAA”)-approved jet engine and aircraft component replacement parts, other than the original equipment manufacturers (“OEMs”) and their subcontractors. HEICO also believes it is a leading manufacturer of various types of electronic equipment for the aviation, defense, space, medical, telecommunications and electronics industries.

The Company was originally organized in 1957 as a holding company known as HEICO Corporation. As part of a reorganization completed in 1993, the original holding company (formerly known as HEICO Corporation) was renamed as HEICO Aerospace Corporation and a new holding corporation known as HEICO Corporation was created. The reorganization did not result in any change in the business of the Company, its consolidated assets or liabilities or the relative interests of its shareholders.

Our business is comprised of two operating segments:

The Flight Support Group. Our Flight Support Group (“FSG”), consisting of HEICO Aerospace Holdings Corp. and HEICO Flight Support Corp. and their collective subsidiaries, accounted for 60%, 62% and 63% of our net sales in fiscal 2019, 2018 and 2017, respectively. The Flight Support Group uses proprietary technology to design and manufacture jet engine and aircraft component replacement parts for sale at lower prices than those manufactured by OEMs. These parts are approved by the FAA and are the functional equivalent of parts sold by OEMs. In addition, the Flight Support Group repairs, overhauls and distributes jet engine and aircraft components, avionics and instruments for domestic and foreign commercial air carriers and aircraft repair companies as well as military and business aircraft operators; and manufactures thermal insulation products, complex composite assemblies, and other component parts primarily for aerospace, defense, industrial and commercial applications.

The Electronic Technologies Group. Our Electronic Technologies Group (“ETG”), consisting of HEICO Electronic Technologies Corp. and its subsidiaries, accounted for 40%, 38% and 37% of our net sales in fiscal 2019, 2018 and 2017, respectively. The Electronic Technologies Group derived approximately 64%, 65% and 64% of its net sales in fiscal 2019, 2018 and 2017, respectively, from the sale of products and services to United States ("U.S.") and foreign military agencies, prime defense contractors and both commercial and defense satellite and spacecraft manufacturers. The ETG designs, manufactures and sells various types of electronic, data and microwave, and electro-optical products, including infrared simulation and test equipment, laser rangefinder receivers, electrical power supplies, back-up power supplies, power conversion products, underwater locator beacons, emergency locator transmission beacons, electromagnetic and radio frequency interference shielding, high power capacitor charging power supplies, amplifiers, traveling wave tube amplifiers, photodetectors, amplifier modules, microwave power modules, flash lamp drivers, laser diode drivers, arc lamp power supplies, custom power supply designs, cable assemblies, high voltage power supplies, high voltage interconnection devices and wire, high voltage energy generators, high frequency power delivery systems, three-dimensional microelectronic and stacked memory products, harsh environment electronic connectors and other interconnect products, radio frequency ("RF") and microwave amplifiers, transmitters and receivers; RF sources, detectors and controllers, wireless cabin control systems, solid state power distribution and management systems, crashworthy and ballistically self-sealing auxiliary fuel systems, nuclear radiation detectors, communications and electronic intercept receivers and tuners, fuel level sensing systems, high-speed interface products that link devices such as telemetry receivers, digital cameras, high resolution scanners, simulation systems and test systems to almost any computer; high performance active antenna systems for commercial aircraft, precision guided munitions, other defense applications and commercial uses; silicone material for a variety of demanding applications; precision power analog monolithic, hybrid and open frame components; high-reliability ceramic-to-metal feedthroughs and connectors, and technical surveillance countermeasures equipment to detect devices used for espionage and information theft.

HEICO has continuously operated in the aerospace industry for over 60 years. Since assuming control in 1990, our current management has achieved significant sales and profit growth through a broadened line of product offerings, an expanded customer base, increased research and development expenditures and the completion of a number of acquisitions. As a result of internal growth and acquisitions, our net sales from continuing operations have grown from $26.2 million in fiscal 1990 to $2,055.6 million in fiscal 2019, representing a compound annual growth rate of approximately 16%. During the same period, we improved our net income from $2.0 million to $327.9 million, representing a compound annual growth rate of approximately 19%.

Disciplined Acquisition Strategy

Acquisitions have been an important element of our growth strategy over the past twenty-nine years, supplementing our organic growth. Since 1990, we have completed approximately 77 acquisitions complementing the niche segments of the aviation, defense, space, medical, telecommunications and electronics industries in which we operate. We typically target acquisition opportunities that allow us to broaden our product offerings, services and technologies while expanding our customer base and geographic presence. Even though we have historically pursued an active acquisition policy, our disciplined acquisition strategy involves limiting acquisition candidates to businesses that we believe will continue to grow, offer strong cash flow and earnings potential, and are available at fair prices. See Note 2, Acquisitions, of the Notes to Consolidated Financial Statements for further information regarding our recent acquisitions.

Flight Support Group

The Flight Support Group serves a broad spectrum of the aviation industry, including (i) commercial airlines and air cargo carriers; (ii) repair and overhaul facilities; (iii) OEMs; and (iv) U.S. and foreign governments.

The Flight Support Group competes with the leading industry OEMs and, to a lesser extent, with a number of smaller, independent parts distributors. Historically, the three principal jet engine OEMs, General Electric (including CFM International), Pratt & Whitney and Rolls Royce, have been the sole source of substantially all jet engine replacement parts for their jet engines. Other OEMs have been the sole source of replacement parts for their aircraft component parts. While we believe that we currently supply approximately 2% of the market for jet engine and aircraft component replacement parts, we have in recent years been adding new products to our line at a rate of approximately 300 to 500 Parts Manufacturer Approvals (“PMA” or “PMAs”) per year. We have developed for our customers approximately 11,200 parts for which PMAs have been received from the FAA.

Jet engine and aircraft component replacement parts can be categorized by their ongoing ability to be repaired and returned to service. The general categories in which we participate are as follows: (i) rotable; (ii) repairable; and (iii) expendable. A rotable is a part which is removed periodically as dictated by an operator’s maintenance procedures or on an as needed basis and is typically repaired or overhauled and re-used an indefinite number of times. An important subset of rotables is “life limited” parts. A life limited rotable has a designated number of allowable flight hours and/or cycles (one take-off and landing generally constitutes one cycle) after which it is rendered unusable. A repairable is similar to a rotable except that it can only be repaired a limited number of times before it must be discarded. An expendable is generally a part which is used and not thereafter repaired for further use.

Jet engine and aircraft component replacement parts are classified within the industry as (i) factory-new; (ii) new surplus; (iii) overhauled; (iv) repairable; and (v) as removed. A factory-new or new surplus part is one that has never been installed or used. Factory-new parts are purchased from FAA-approved manufacturers (such as HEICO or OEMs) or their authorized distributors. New surplus parts are purchased from excess stock of airlines, repair facilities or other redistributors. An overhauled part is one that has been completely repaired and inspected by a licensed repair facility such as ours. An aircraft spare part is classified as “repairable” if it can be repaired by a licensed repair facility under applicable regulations. A part may also be classified as “repairable” if it can be removed by the operator from an aircraft or jet engine while operating under an approved maintenance program and is airworthy and meets any manufacturer or time and cycle restrictions applicable to the part. A “factory-new,” “new surplus” or “overhauled” part designation indicates that the part can be immediately utilized on an aircraft. A part in “as removed” or “repairable” condition requires inspection and possibly functional testing, repair or overhaul by a licensed facility prior to being returned to service in an aircraft.

Factory-New Jet Engine and Aircraft Component Replacement Parts. The Flight Support Group engages in the research and development, design, manufacture and sale of FAA-approved replacement parts that are sold to domestic and foreign commercial air carriers and aircraft repair and overhaul companies. Our principal competitors are aircraft engine and aircraft component manufacturers. The Flight Support Group’s factory-new replacement parts include various jet engine and aircraft component replacement parts. A key element of our growth strategy is the continued design and development of an increasing number of PMA replacement parts in order to further penetrate our existing customer base and obtain new customers. We select the jet engine and aircraft component replacement parts to design and manufacture through a selection process which analyzes industry information to determine which replacement parts are suitable candidates.

Repair and Overhaul Services. The Flight Support Group provides repair and overhaul services on selected jet engine and aircraft component parts, as well as on avionics, instruments, composites and flight surfaces of commercial aircraft operated by domestic and foreign commercial airlines. The Flight Support Group also provides repair and overhaul services including avionics and navigation systems as well as subcomponents and other instruments utilized on military aircraft operated by the U.S. government and foreign military agencies and for aircraft repair and overhaul companies. Our repair and overhaul operations require a high level of expertise, advanced technology and sophisticated equipment. Services include the repair, refurbishment and overhaul of numerous accessories and parts mounted on gas turbine engines and airframes. Components overhauled include fuel pumps, generators, fuel controls, pneumatic valves, starters and actuators, turbo compressors and constant speed drives, hydraulic pumps, valves and actuators, wheels and brakes, composite flight controls, electro-mechanical equipment, auxiliary power unit accessories and thrust reverse actuation systems. Some of the repair and overhaul services provided by the Flight Support Group are proprietary repairs approved by an FAA-qualified designated engineering representative (“DER”) and/or by the owner/operator. Such proprietary repairs typically create cost savings or provide engineering flexibility. The Flight Support Group also provides commercial airlines, regional operators, asset management companies and Maintenance, Repair and Overhaul (“MRO”) providers with high quality and cost effective niche accessory component exchange services as an alternative to OEMs’ spares services.

Distribution. The Flight Support Group distributes FAA-approved parts including hydraulic, pneumatic, structural, interconnect, mechanical and electro-mechanical components for the commercial, regional and general aviation markets. The Flight Support Group also is a leading supplier, distributor, and integrator of military aircraft parts and support services primarily to foreign military organizations allied with the U.S. Further, we believe the Flight Support Group is a leading provider of products and services necessary to maintain up-to-date F-16 fighter aircraft operational capabilities.

Manufacture of Specialty Aircraft/Defense Related Parts and Subcontracting for OEMs. The Flight Support Group engineers, designs and manufactures thermal insulation blankets and parts as well as renewable/reusable insulation systems primarily for aerospace, defense, commercial and industrial applications. The Flight Support Group also manufactures specialty components for sale as a subcontractor for aerospace and industrial original equipment manufacturers and the U.S. government. Additionally, the Flight Support Group manufactures advanced niche components and complex composite assemblies for commercial aviation, defense and space applications, and manufactures expanded foil mesh, which is integrated into composite aerospace structures for lightning strike protection in fixed and rotary wing aircraft.

FAA Approvals and Product Design. Non-OEM manufacturers of jet engine and aircraft component replacement parts must receive a PMA from the FAA to sell the replacement part. The PMA approval process includes the submission of sample parts, drawings and testing data to one of the FAA’s Aircraft Certification Offices where the submitted data are analyzed. We believe that an applicant’s ability to successfully complete the PMA process is limited by several factors, including (i) the agency’s confidence level in the applicant; (ii) the complexity of the part; (iii) the volume of PMAs being filed; and (iv) the resources available to the FAA. We also believe that companies such as HEICO that have demonstrated their advanced design engineering and manufacturing capabilities, including an established favorable track record with the FAA, generally receive a faster turnaround time in the processing of PMA applications. Finally, we believe that the PMA process creates a significant barrier to entry in this market niche through both its technical demands and its limits on the rate at which competitors can bring products to market.

As part of our growth strategy, we have continued to increase our research and development activities. Research and development expenditures by the Flight Support Group, which were approximately $.3 million in fiscal 1991, increased to approximately $23.8 million in fiscal 2019, $21.3 million in fiscal 2018 and $17.9 million in fiscal 2017. We believe that our Flight Support Group’s research and development capabilities are a significant component of our historical success and an integral part of our growth strategy. In recent years, the FAA granted us PMAs for approximately 300 to 500 new parts and we develop approximately 300 to 400 new proprietary repairs per year; however, no assurance can be given that the FAA will continue to grant PMAs or DER-approved repairs or that we will achieve acceptable levels of net sales and gross profits on such parts or repairs in the future.

We benefit from our proprietary rights relating to certain design, engineering and manufacturing processes and repair and overhaul procedures. Customers often rely on us to provide initial and additional components, as well as to redesign, re-engineer, replace or repair and provide overhaul services on such aircraft components at every stage of their useful lives. In addition, for some products, our unique manufacturing capabilities are required by the customer’s specifications or designs, thereby necessitating reliance on us for production of such designed products.

We have no material patents for the proprietary techniques, including software and manufacturing expertise, we have developed to manufacture jet engine and aircraft component replacement parts and instead, we primarily rely on trade secret protection. Although our proprietary techniques and software and manufacturing expertise are subject to misappropriation or obsolescence, we believe that we take appropriate measures to prevent misappropriation or obsolescence from occurring by developing new techniques and improving existing methods and processes, which we will continue on an ongoing basis as dictated by the technological needs of our business.

We believe that, based on our competitive pricing, reputation for high quality, short lead time requirements, strong relationships with domestic and foreign commercial air carriers and repair stations (companies that overhaul aircraft engines and/or components), and successful track record of receiving PMAs and repair approvals from the FAA and commercial air carriers, we are uniquely positioned to continue to increase the products and services offered and gain market share.

Electronic Technologies Group

Our Electronic Technologies Group’s strategy is to design and manufacture highly-engineered, mission-critical subcomponents that must successfully operate in the harshest environments, for smaller, niche markets, but which are utilized in larger systems – systems like power, targeting, tracking, identification, simulation, testing, communications, lighting, surgical, medical imaging, baggage scanning, telecom and computer systems. These systems are, in turn, often located on another platform, such as aircraft, rotorcraft, satellites, ships, spacecraft, land vehicles, handheld devices and other platforms.

Electro-Optical Infrared Simulation and Test Equipment. The ETG is a designer and manufacturer of niche state-of-the-art simulation, testing and calibration equipment used in the development of missile seeking technology, airborne targeting and reconnaissance systems, shipboard targeting and reconnaissance systems, space-based sensors as well as ground vehicle-based systems. These products include infrared scene projector equipment, such as our MIRAGE IR Scene Simulator, high precision blackbody sources, software and integrated calibration systems.

Simulation equipment allows the U.S. government and allied foreign military to save money on missile testing as it allows infrared-based missiles to be tested on a multi-axis, rotating table instead of requiring the launch of a complete missile. In addition, several large military prime contractors have elected to purchase such equipment from us instead of maintaining internal staff to do so because we can offer a more cost-effective solution. Our customers include major U.S. Department of Defense weapons laboratories and defense prime contractors.

Electro-Optical Laser Products. The ETG is a designer and maker of Laser Rangefinder Receivers and other photodetectors used in airborne, vehicular and handheld targeting systems manufactured by major prime military contractors. Most of our Rangefinder Receiver product offering consists of complex and patented products which detect reflected light from laser targeting systems and allow the systems to confirm target accuracy and calculate target distances prior to discharging a weapon system. Some of these products are also used in laser eye surgery systems for tracking ocular movement.

Electro-Optical, Microwave and Other Power Equipment. The ETG produces power supplies, amplifiers and flash lamp drivers used in laser systems for military, medical and other applications that are sometimes utilized with our rangefinder receivers. We also produce emergency back-up power supplies and batteries used on commercial aircraft and business jets for services such as emergency exit lighting, emergency fuel shut-off, power door assists, cockpit voice recorders and flight computers. We also design and manufacture next generation wireless cabin control systems, solid state power distribution and management systems and fuel level sensing systems for business jets and for general aviation, as well as for the military/defense market. We offer custom or standard designs that solve challenging OEM requirements and meet stringent safety and emissions requirements. Our power electronics products include capacitor charger power supplies, laser diode drivers, arc lamp power supplies and custom power supply designs.

Our microwave products are used in both commercial and military satellites, spacecraft and in electronic warfare systems. These products, which include isolators, bias tees, circulators, latching ferrite switches and waveguide adapters, are used in satellites and spacecraft to control or direct energy according to operator needs. As satellites are frequently used as sensors for stand-off warfare, we believe this product line further supports our goal of increasing our activity in the stand-off market. Additionally, our microwave products include converters, receivers, transmitters, amplifiers, frequency sources and related sub-systems that address the majority of major satellite frequencies. We believe we are a leading supplier of the niche products which we design and manufacture for this market, a market that includes commercial satellites. Our customers for these products include satellite and spacecraft manufacturers.

Electromagnetic and Radio Interference Shielding. The ETG designs and manufactures shielding used to prevent electromagnetic energy and radio frequencies from interfering with other devices, such as computers, telecommunication devices, avionics, weapons systems and other electronic equipment. Our products include a patented line of shielding applied directly to circuit boards and a line of gasket-type shielding applied to computers and other electronic equipment. Our customers consist essentially of medical, electronics, telecommunications and defense equipment producers.

High-Speed Interface Products. The ETG designs and manufactures advanced high-technology, high-speed interface products utilized in homeland security, defense, medical research, astronomical and other applications across numerous industries.

High Voltage Interconnection Devices. The ETG designs and manufactures high and very high voltage interconnection devices, cable assemblies and wire for the medical equipment, defense and other industrial markets. Among others, our products are utilized in aircraft missile defense, fighter pilot helmet displays, avionic systems, medical applications, wireless communications, and industrial applications including high voltage test equipment and underwater monitoring systems.

High Voltage Advanced Power Electronics. The ETG designs and manufactures a patented line of high voltage energy generators for medical, baggage inspection and industrial imaging systems. We also produce high voltage power supplies found in satellite communications, CT scanners and in medical and industrial x-ray systems.

Power Conversion Products. The ETG designs and provides innovative power conversion products principally serving the high-reliability military, space and commercial avionics end-markets. These high density, low profile and lightweight DC-to-DC converters and electromagnetic interference filters, which include thick film hermetically sealed hybrids, military commercial-off-the-shelf and custom designed and assembled products, have become the primary specified components of their kind on a generation of complex military, space and avionics equipment.

Underwater Locator Beacons and Emergency Locator Transmission Beacons. The ETG designs and manufactures Underwater Locator Beacons (“ULBs”) used to locate aircraft Cockpit Voice Recorders and Flight Data Recorders, marine ship Voyage Recorders and various other devices which have been submerged under water. ULBs are required equipment on all U.S. FAA and European Aviation Safety Agency (“EASA”) approved Flight Data and Cockpit Voice Recorders used in aircraft and on similar systems utilized on large marine shipping vessels. The ETG also designs and manufactures Emergency Locator Transmission Beacons for the commercial aviation and defense markets. Upon activation, these safety-critical devices transmit a distress signal to alert search and rescue operations of the aircraft's location.

Traveling Wave Tube Amplifiers (“TWTAs”) and Microwave Power Modules (“MPMs”). The ETG designs and manufactures TWTAs and MPMs predominately used in radar, electronic warfare, on-board jamming and countermeasure systems in aircraft, ships and detection platforms deployed by U.S. and allied non-U.S. military forces.

Three-Dimensional Microelectronic and Stacked Memory Products. The ETG designs, manufactures and markets three-dimensional microelectronic and stacked memory products including memories, Point of Load (“POL”) voltage converters and peripherals, industrial memories, and complex System-in-Package (“SiP”) solutions. The products’ patented designs provide high reliability memory and circuitry in a unique and stacked form which saves space and weight. These products are principally integrated into larger subsystems equipping satellites and spacecraft and are also utilized in medical equipment.

Harsh Environment Connectivity Products and Custom Molded Cable Assemblies. The ETG designs and manufactures high performance, high reliability and harsh environment electronic connectors and other interconnect products. These products include connectors, jacks and plugs, cables, patch panels and switches utilized in aviation, broadcast/audio, defense, industrial, medical and other equipment.

RF and Microwave Amplifiers, Transmitters and Receivers. The ETG designs and manufactures RF and microwave amplifiers, transmitters and receivers to support military communications on unmanned aerial systems, other aircraft, helicopters and ground-based data/communications systems.

High Performance Communications and Electronic Intercept Receivers and Tuners. The ETG designs and manufactures innovative, high performance receiver and radio frequency digitizer products for military and intelligence applications.

Crashworthy and Ballistically Self-Sealing Auxiliary Fuel Systems. The ETG designs and manufactures mission-extending, crashworthy and ballistically self-sealing auxiliary fuel systems for military rotorcraft.

High Performance Active Antenna Systems. The ETG designs and produces high performance active antenna systems for commercial aircraft, precision guided munitions, other defense applications and commercial uses.

Nuclear Radiation Detectors. The ETG designs and manufactures highly sensitive, reliable and easy-to-use nuclear radiation detectors for law enforcement, homeland security and military applications.

Specialty Silicone Products. The ETG designs and manufactures silicone material for a variety of demanding applications used in aerospace, defense, research, oil and gas, testing, pharmaceuticals and other markets.

High-End Power Amplifiers. The ETG designs and manufactures precision power analog monolithic, hybrid and open frame components for a certain wide range of defense, industrial, measurement, medical and test applications.

High-Reliability Ceramic-to-Metal Feedthroughs and Connectors. The ETG designs and manufactures high-reliability ceramic-to-metal feedthroughs and connectors for demanding environments within the industrial, life science, medical, research, semiconductor, and other markets.

Technical Surveillance Countermeasures Equipment. The ETG designs and manufactures Technical Surveillance Countermeasures ("TSCM") equipment to detect devices used for espionage and information theft serving government agencies, law enforcement, corporate security personnel and TSCM professionals worldwide.

High-end Radio Frequency Receivers and Sources. The ETG designs and manufactures RF Sources, Detectors and Controllers for a certain wide range of aerospace and defense applications.

As part of our growth strategy, we have continued to invest in our research and development activities. Research and development expenditures by the Electronic Technologies Group were $42.8 million in fiscal 2019, $36.2 million in fiscal 2018 and $28.6 million in fiscal 2017. We believe that our Electronic Technologies Group’s research and development capabilities are a significant component of our historical success and an integral part of our growth strategy.

Distribution, Sales, Marketing and Customers

Each of our operating segments independently conducts distribution, sales and marketing efforts directed at their respective customers and industries and, in some cases, collaborates with other operating divisions and subsidiaries within its group for cross-marketing efforts. Sales and marketing efforts are conducted primarily by in-house personnel and, to a lesser extent, by independent manufacturers’ representatives. Generally, our in-house sales personnel receive a base salary plus commissions and manufacturers’ representatives receive a commission based on sales.

We believe that direct relationships are crucial to establishing and maintaining a strong customer base and, accordingly, our senior management is actively involved in our marketing activities, particularly with established customers. We are also a member of various trade and business organizations related to the commercial aviation industry, such as the Aerospace Industries Association, which we refer to as AIA, the leading trade association representing the nation’s manufacturers of commercial, military and business aircraft, aircraft engines and related components and equipment. Due in large part to our established industry presence, we enjoy strong customer relations, name recognition and repeat business.

We sell our products to a broad customer base consisting of domestic and foreign commercial and cargo airlines, repair and overhaul facilities, other aftermarket suppliers of aircraft engine and airframe materials, OEMs, domestic and foreign military units, electronic manufacturing services companies, manufacturers for the defense industry as well as medical, telecommunications, scientific, and industrial companies. No one customer accounted for sales of 10% or more of total consolidated sales from continuing operations during any of the last three fiscal years. Net sales to our five largest customers accounted for approximately 20%, 20% and 18% of total net sales in fiscal 2019, 2018 and 2017, respectively.

Competition

The aerospace product and service industry is characterized by intense competition. Some of our competitors have substantially greater name recognition, inventories, complementary product and service offerings, financial, marketing and other resources than we do. As a result, such competitors may be able to respond more quickly to customer requirements than we can. Moreover, smaller competitors may be in a position to offer more attractive pricing as a result of lower labor costs and other factors.

Our jet engine and aircraft component replacement parts business competes primarily with aircraft engine and aircraft component OEMs. The competition is principally based on price and service to the extent that our parts are interchangeable. With respect to other aerospace products and services sold by the Flight Support Group, we compete with both the leading jet engine and aircraft component OEMs and a large number of machining, fabrication, distribution and repair companies, some of which have greater financial and other resources than we do. Competition is based mainly on price, product performance, service and technical capability.

Competition for the repair and overhaul of jet engine and aircraft components and avionics and navigation systems as well as the manufacture of specialty aircraft and defense related parts comes from three principal sources: OEMs, major commercial airlines and other independent service companies. Some of these competitors have greater financial and other resources than we do. Some major commercial airlines own and operate their own service centers and sell repair and overhaul services to other aircraft operators. Foreign airlines that provide repair and overhaul services typically provide these services for their own aircraft components and for third parties. OEMs also maintain service centers that provide repair and overhaul services for the components they manufacture. Other independent service organizations also compete for the repair and overhaul business of other users of aircraft components. We believe that the principal competitive factors in the repair and overhaul market are quality, turnaround time, overall customer service and price.

Our Electronic Technologies Group competes with several large and small domestic and foreign competitors, some of which have greater financial and other resources than we do. The markets for our electronic, data and microwave, and electro-optical equipment products are niche markets with several competitors where competition is based mainly on design, technology, quality, price, service and customer satisfaction.

Raw Materials

We purchase a variety of raw materials, primarily consisting of high temperature alloy sheet metal and castings, forgings, pre-plated metals and electrical components from various vendors. The materials used by our operations are generally available from a number of sources and in sufficient quantities to meet current requirements subject to normal lead times. We are subject to rules promulgated by the Securities Exchange Commission pursuant to the Dodd-Frank Wall Street Reform and Consumer Protection Act regarding the use of certain materials (tantalum, tin, gold and tungsten), known as conflict minerals, which are mined from the Democratic Republic of the Congo and adjoining countries. These rules may impose additional costs and may introduce new risks related to our ability to verify the origin of any conflict minerals used in our products.

Backlog

Our total backlog was $900 million as of October 31, 2019 as compared to $783 million as of October 31, 2018. The majority of our backlog of orders as of October 31, 2019 is expected to be filled during fiscal 2020. The Electronic Technologies Group’s backlog of unshipped orders was $575 million as of October 31, 2019 as compared to $472 million as of October 31, 2018. The increase in the Electronic Technologies Group's backlog reflects increased orders at one of our businesses that designs and produces mission-extending, crashworthy and ballistically self-sealing auxiliary fuel systems for military rotorcraft as well as the backlogs of businesses acquired during fiscal 2019. The Flight Support Group’s backlog of unshipped orders was $325 million as of October 31, 2019 as compared to $311 million as of October 31, 2018. This backlog excludes forecasted shipments for certain contracts of the Flight Support Group pursuant to which customers provide only estimated annual usage and not firm purchase orders. Our backlogs within the Flight Support Group are typically short-lead in nature with many product orders being received within the month of shipment.

Government Regulation

The FAA regulates the manufacture, repair and operation of all aircraft and aircraft parts operated in the United States. Its regulations are designed to ensure that all aircraft and aviation equipment are continuously maintained in proper condition to ensure safe operation of the aircraft. Similar rules apply in other countries. All aircraft must be maintained under a continuous condition monitoring program and must periodically undergo thorough inspection and maintenance. The inspection, maintenance and repair procedures for the various types of aircraft and equipment are prescribed by regulatory authorities and can be performed only by certified repair facilities utilizing certified technicians. Certification and conformance is required prior to installation of a part on an aircraft. Aircraft operators must maintain logs concerning the utilization and condition of aircraft engines, life-limited engine parts and airframes. In addition, the FAA requires that various maintenance routines be performed on aircraft engines, some engine parts, and airframes at regular intervals based on cycles or flight time. Engine maintenance must also be performed upon the occurrence of certain events, such as foreign object damage in an aircraft engine or the replacement of life-limited engine parts. Such maintenance usually requires that an aircraft engine be taken out of service. Our operations may in the future be subject to new and more stringent regulatory requirements. In that regard, we closely monitor the FAA and industry trade groups in an attempt to understand how possible future regulations might impact us. Our businesses which sell defense products directly to the U.S. Government or for use in systems delivered to the U.S. Government can be subject to various laws and regulations governing pricing and other factors.

There has been no material adverse effect to our consolidated financial statements as a result of these government regulations.

Environmental Regulation

Our operations are subject to extensive, and frequently changing, federal, state and local environmental laws and substantial related regulation by government agencies, including the Environmental Protection Agency. Among other matters, these regulatory authorities impose requirements that regulate the operation, handling, transportation and disposal of hazardous materials; protect the health and safety of workers; and require us to obtain and maintain licenses and permits in connection with our operations. This extensive regulatory framework imposes significant compliance burdens and risks on us. Notwithstanding these burdens, we believe that we are in material compliance with all federal, state and local environmental laws and regulations governing our operations.

There has been no material adverse effect to our consolidated financial statements as a result of these environmental regulations.

Other Regulation

We are also subject to a variety of other regulations including work-related and community safety laws. The Occupational Safety and Health Act of 1970 mandates general requirements for safe workplaces for all employees and established the Occupational Safety and Health Administration (“OSHA”) in the Department of Labor. In particular, OSHA provides special procedures and measures for the handling of certain hazardous and toxic substances. In addition, specific safety standards have been promulgated for workplaces engaged in the treatment, disposal or storage of hazardous waste. Requirements under state law, in some circumstances, may mandate additional measures for facilities handling materials specified as extremely dangerous. We believe that our operations are in material compliance with OSHA’s health and safety requirements.

Insurance

We are a named insured under policies which include the following coverage: (i) product liability, including grounding; (ii) personal property, inventory and business interruption at our facilities; (iii) general liability coverage; (iv) employee benefit liability; (v) international liability and automobile liability; (vi) umbrella liability coverage; and (vii) various other activities or items, each subject to certain limits and deductibles. We believe that our insurance coverage is adequate to insure against the various liability risks of our business.

Employees

As of October 31, 2019, we had approximately 5,900 full-time and part-time employees including approximately 3,400 in the Flight Support Group and approximately 2,500 in the Electronic Technologies Group. None of our employees are represented by a U.S. domestic union. Our management believes that we have good relations with our employees.

Available Information

Our Internet website address is http://www.heico.com. We make available free of charge, through the Investors section of our website, our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, specialized disclosure reports on Form SD and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934 as soon as reasonably practicable after we electronically file such material with, or furnish it to, the Securities and Exchange Commission (“SEC”). These materials are also available free of charge on the SEC’s website at http://www.sec.gov. The information on or obtainable through our website is not incorporated into this annual report on Form 10-K.

We have adopted a code of ethics that applies to our principal executive officer, principal financial officer, principal accounting officer or controller and other persons performing similar functions. Our Code of Ethics for Senior Financial Officers and Other Officers is part of our Code of Business Conduct, which is located on our website at http://www.heico.com. Any amendments to or waivers from a provision of this code of ethics will be posted on the website. Also located on the website are our Corporate Governance Guidelines, Finance/Audit Committee Charter, Nominating & Corporate Governance Committee Charter, and Compensation Committee Charter.

Copies of the above referenced materials will be made available, free of charge, upon written request to the Corporate Secretary at HEICO Corporation, 3000 Taft Street, Hollywood, Florida 33021.

Information About Our Executive Officers

Our executive officers are appointed by the Board of Directors and serve at the discretion of the Board. The following table sets forth the names, ages of, and positions and offices held by our executive officers as of December 17, 2019:

Name Age Position(s) Director Since
Laurans A. Mendelson 81 Chairman of the Board; Chief Executive Officer; and Director 1989
Eric A. Mendelson 54 Co-President and Director; President and Chief Executive Officer of the HEICO Flight Support Group 1992
Victor H. Mendelson 52 Co-President and Director; President and Chief Executive Officer of the HEICO Electronic Technologies Group 1996
Thomas S. Irwin 73 Senior Executive Vice President —
Carlos L. Macau, Jr. 52 Executive Vice President - Chief Financial Officer and Treasurer —
Steven M. Walker 55 Chief Accounting Officer and Assistant Treasurer —

Laurans A. Mendelson has served as our Chairman of the Board since December 1990. He has also served as our Chief Executive Officer since February 1990 and served as our President from September 1991 through September 2009. Mr. Mendelson is a member of the Board of Governors of the Aerospace Industries Association (“AIA”) in Washington, D.C., of which HEICO is a member. He is the former Chairman of the Board of Trustees, former Chairman of the Executive Committee and a current member of the Society of Mount Sinai Founders of Mount Sinai Medical Center in Miami Beach, Florida. In addition, Mr. Mendelson is a Trustee Emeritus of Columbia University in the City of New York, where he previously served as Trustee and Chairman of the Trustees’ Audit Committee. Laurans Mendelson is the father of Eric Mendelson and Victor Mendelson.

Eric A. Mendelson has served as our Co-President since October 2009 and served as our Executive Vice President from 2001 through September 2009. Mr. Mendelson has also served as President and Chief Executive Officer of the HEICO Flight Support Group since its formation in 1993, as well as President of various Flight Support Group subsidiaries. Mr. Mendelson is a co-founder, and, since 1987, has been Managing Director of Mendelson International Corporation, a private investment company, which is a shareholder of HEICO. In addition, Mr. Mendelson is a member of the Advisory Board of Trustees of Mount Sinai Medical Center in Miami Beach,

Florida, and a member of the Board of Trustees and a Past Chairman of Ransom Everglades School in Coconut Grove, Florida, as well as a member of the Board of Visitors of Columbia College in New York City. Eric Mendelson is the son of Laurans Mendelson and the brother of Victor Mendelson.

Victor H. Mendelson has served as our Co-President since October 2009 and served as our Executive Vice President from 2001 through September 2009. Mr. Mendelson has also served as President and Chief Executive Officer of the HEICO Electronic Technologies Group since its formation in September 1996. He served as our General Counsel from 1993 to 2008 and our Vice President from 1996 to 2001. In addition, Mr. Mendelson was the Chief Operating Officer of our former MediTek Health Corporation subsidiary from 1995 until its profitable sale in 1996. Mr. Mendelson is a co-founder, and, since 1987, has been President of Mendelson International Corporation, a private investment company, which is a shareholder of HEICO. Mr. Mendelson is a former Director and Audit Committee member of NASDAQ-listed Terrapin 3 Acquisition Corp. Mr. Mendelson is a Trustee of Columbia University in the City of New York, a Trustee of St. Thomas University in Miami Gardens, Florida, a Director of Boys & Girls Clubs of Miami-Dade and is a Director and Past President of the Board of Directors of the Florida Grand Opera. Victor Mendelson is the son of Laurans Mendelson and the brother of Eric Mendelson.

Thomas S. Irwin has served as our Senior Executive Vice President since June 2012; our Executive Vice President, Chief Financial Officer and Treasurer from September 1991 through May 2012; Senior Vice President and Treasurer from 1986 to 1991; and our Vice President and Treasurer from 1982 to 1986. Mr. Irwin is a Certified Public Accountant. He is a member of the American and North Carolina Institutes of Certified Public Accountants and a member of Financial Executives International.

Carlos L. Macau, Jr. has served as our Executive Vice President - Chief Financial Officer and Treasurer since June 2012. Mr. Macau joined HEICO from the international public accounting firm of Deloitte & Touche LLP where he worked from 2000 to 2012 as an Audit Partner. Prior to joining HEICO, Mr. Macau accumulated 22 years of financial and accounting experience serving a number of public and private manufacturing and service clients in a broad range of industries. His client responsibilities included serving as HEICO's lead client services partner for five years (2006 to 2010). Mr. Macau is a current member of the Mount Sinai Founders of Mount Sinai Medical Center in Miami Beach, Florida. Mr. Macau is a Certified Public Accountant, a Chartered Global Management Accountant, and a member of the American and Florida Institutes of Certified Public Accountants.

Steven M. Walker has served as our Chief Accounting Officer since June 2012 and served as our Corporate Controller from 2002 through May 2012. He has also served as our Assistant Treasurer since 2002. Mr. Walker is a Certified Public Accountant and a member of the American Institute of Certified Public Accountants.

Risk factors

As filed, 23,470 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Our business, financial condition, operating results and cash flows may be impacted by a number of factors, many of which are beyond our control, including those set forth below and elsewhere in this Annual Report on Form 10-K, any one of which may cause our actual results to differ materially from anticipated results:

Our success is highly dependent on the performance of the aviation industry, which could be impacted by lower demand for commercial air travel or airline fleet changes causing lower demand for our goods and services.

General global industry and economic conditions that affect the aviation industry also affect our business. We are subject to macroeconomic cycles and when recessions occur, we may experience reduced orders, payment delays, supply chain disruptions or other factors as a result of the economic challenges faced by our customers, prospective customers and suppliers. Further, the aviation industry has historically been subject to downward cycles from time to time which reduce the overall demand for jet engine and aircraft component replacement parts and repair and overhaul services, and such downward cycles result in lower sales and greater credit risk. Demand for commercial air travel can be influenced by airline industry profitability, world trade policies, government-to-government relations, terrorism, disease outbreaks, environmental constraints imposed upon aircraft operations, technological changes, price and other competitive factors. These global industry and economic conditions may have a material adverse effect on our business, financial condition and results of operations.

We are subject to governmental regulation and our failure to comply with these regulations could cause the government to withdraw or revoke our authorizations and approvals to do business and could subject us to penalties and sanctions that could harm our business.

Governmental agencies throughout the world, including the FAA, highly regulate the manufacture, repair and overhaul of aircraft parts and accessories. We include, with the replacement parts that we sell to our customers, documentation certifying that each part complies with applicable regulatory requirements and meets applicable standards of airworthiness established by the FAA or the equivalent regulatory agencies in other countries. In addition, our repair and overhaul operations are subject to certification pursuant to regulations established by the FAA. Specific regulations vary from country to country, although compliance with FAA requirements generally satisfies regulatory requirements in other countries. The revocation or suspension of any of our material authorizations or approvals would have an adverse effect on our business, financial condition and results of operations. New and more stringent government regulations, if adopted and enacted, could have an adverse effect on our business, financial condition and results of operations. In addition, certain product sales to foreign countries of our Electronic Technologies Group and Flight Support Group require approval or licensing from the United States ("U.S.") government. Denial of export licenses could reduce our sales to those countries and could have a material adverse effect on our business.

Pursuant to the Dodd-Frank Wall Street Reform and Consumer Protection Act, the Securities and Exchange Commission promulgated disclosure requirements regarding the use of certain minerals (tantalum, tin, gold and tungsten), known as conflict minerals, which are mined from the Democratic Republic of the Congo or one of its adjoining countries. There are costs associated with complying with the disclosure requirements, such as costs related to determining the source of certain minerals used in our products, as well as costs of possible changes to products, processes, or sources of supply as a consequence of such verification activities. Given the complexity of our supply chain, we may not be able to ascertain the origin of these minerals used in our products in a timely manner, which could cause some of our customers to disqualify us as a supplier to the extent we are unable to certify our products are conflict mineral free. Additionally, the rule could affect sourcing at competitive prices and availability in sufficient quantities of such minerals used in our manufacturing processes for certain products.

The retirement of commercial aircraft could reduce our revenues.

Our Flight Support Group designs and manufactures jet engine and aircraft component replacement parts and also repairs, overhauls and distributes jet engine and aircraft components. If aircraft or engines for which we offer replacement parts or supply repair and overhaul services are retired and there are fewer aircraft that require these parts or services, our revenues may decline.

Reductions in defense, space or homeland security spending by U.S. and/or foreign customers could reduce our revenues.

In fiscal 2019, approximately 64% of the net sales of our Electronic Technologies Group were derived from the sale of defense, commercial and defense satellite and spacecraft components, and homeland security products. A decline in defense, space or homeland security budgets or additional restrictions imposed by the U.S. government on sales of products or services to foreign military agencies could lower sales of our products and services.

We are subject to the risks associated with sales to foreign customers, which could harm our business.

We market our products and services to approximately 110 countries, with approximately 36% of our consolidated net sales in fiscal 2019 derived from sales to foreign customers. We expect that sales to foreign customers will continue to account for a significant portion of our revenues in the foreseeable future. As a result, we are subject to risks of doing business internationally, including the following:

  • Fluctuations in currency exchange rates;
  • Volatility in foreign political, regulatory, and economic environments;
  • Ability to obtain required export licenses or approvals;
  • Uncertainty of the ability of foreign customers to finance purchases;
  • Uncertainties and restrictions concerning the availability of funding credit or guarantees;
  • Imposition of taxes, export controls, tariffs, embargoes and other trade restrictions; and
  • Compliance with a variety of international laws, as well as U.S. laws affecting the activities of U.S. companies abroad such as the U.S. Foreign Corrupt Practices Act.

While the impact of these factors is difficult to predict, any one or more of these factors may have a material adverse effect on our business, financial condition and results of operations.

Intense competition from existing and new competitors may harm our business.

We face significant competition in each of our businesses.

Flight Support Group

  • For jet engine and aircraft component replacement parts, we compete with the industry’s leading jet engine and aircraft component OEMs.
  • For the distribution, overhaul and repair of jet engine and aircraft components and avionics and navigation systems as well as the manufacture of specialty aircraft and defense related parts, we compete with:
  • major commercial airlines, many of which operate their own maintenance and overhaul units;
  • OEMs, which manufacture, distribute, repair and overhaul their own and other OEM parts; and
  • other independent service companies.

Electronic Technologies Group

  • For the design and manufacture of various types of electronic, data and microwave, and electro-optical equipment products, we compete in a fragmented marketplace with a number of companies, some of which are well capitalized.

The aviation aftermarket supply industry is highly fragmented, has several highly visible leading companies, and is characterized by intense competition. Some of our OEM competitors have greater name recognition than HEICO, as well as complementary lines of business and financial, marketing and other resources that HEICO does not have. In addition, OEMs, aircraft maintenance providers, leasing companies and FAA-certificated repair facilities may attempt to bundle their services and product offerings in the supply industry, thereby significantly increasing industry competition. Moreover, our smaller competitors may be able to offer more attractive pricing of parts as a result of lower labor costs or other factors. A variety of potential actions by any of our competitors, including a reduction of product prices or the establishment by competitors of long-term relationships with new or existing customers, could have a material adverse effect on our business, financial condition and results of operations. Competition typically intensifies during cyclical downturns in the aviation industry, when supply may exceed demand. We may not be able to continue to compete effectively against present or future competitors, and competitive pressures may have a material adverse effect on our business, financial condition and results of operations.

Our success is dependent on the development and manufacture of new products, equipment and services. Our inability to develop, manufacture and introduce new products and services at profitable pricing levels could reduce our sales or sales growth.

The aviation, defense, space, medical, telecommunications and electronics industries are constantly undergoing development and change and, accordingly, new products, equipment and methods of repair and overhaul service are likely to be introduced in the future. In addition to manufacturing electronic and electro-optical equipment and selected aerospace and defense components for OEMs and the U.S. government and repairing jet engine and aircraft components, we re-design sophisticated aircraft replacement parts originally developed by OEMs so that we can offer the replacement parts for sale at substantially lower prices than those manufactured by the OEMs. Consequently, we devote substantial resources to research and product development. Technological development poses a number of challenges and risks, including the following:

  • We may not be able to successfully protect the proprietary interests we have in various aircraft parts, electronic and electro-optical equipment and our repair processes;
  • As OEMs continue to develop and improve jet engines and aircraft components, we may not be able to re-design and manufacture replacement parts that perform as well as those offered by OEMs or we may not be able to profitably sell our replacement parts at lower prices than the OEMs;
  • We may need to expend significant capital to:
  • purchase new equipment and machines,
  • train employees in new methods of production and service, and
  • fund the research and development of new products; and
  • Development by our competitors of patents or methodologies that preclude us from the design and manufacture of aircraft replacement parts or electrical and electro-optical equipment could adversely affect our business, financial condition and results of operations.

In addition, we may not be able to successfully develop new products, equipment or methods of repair and overhaul service, and the failure to do so could have a material adverse effect on our business, financial condition and results of operations.

We may not be able to effectively execute our acquisition strategy, which could slow our growth.

A key element of our strategy is growth through the acquisition of additional companies. Our acquisition strategy is affected by and poses a number of challenges and risks, including the following:

  • Availability of suitable acquisition candidates;
  • Availability of capital;
  • Diversion of management’s attention;
  • Effective integration of the operations and personnel of acquired companies;
  • Potential write downs of acquired intangible assets;
  • Potential loss of key employees of acquired companies;
  • Use of a significant portion of our available cash;
  • Significant dilution to our shareholders for acquisitions made utilizing our securities; and
  • Consummation of acquisitions on satisfactory terms.

We may not be able to successfully execute our acquisition strategy, and the failure to do so could have a material adverse effect on our business, financial condition and results of operations.

Goodwill and other intangible assets represent a significant portion of our total assets, and we may never realize the full value of our intangible assets.

As a result of our acquisitions, goodwill and intangible assets represent a significant portion of our total assets. As of October 31, 2019 and 2018, goodwill and intangible assets, net of amortization, accounted for 61% of our total assets. We test our goodwill and intangible assets for impairment on an annual basis, or more frequently if events or changes in circumstances indicate that the carrying amount of such assets may not be fully recoverable. We may not realize the full value of our goodwill and intangible assets, and to the extent that impairment has occurred, we would be required to recognize the impaired portion of such assets in our earnings. An impairment of a significant portion of such assets could have a material adverse effect on our business, financial condition and results of operations.

The inability to obtain certain components and raw materials from suppliers could harm our business.

Our business is affected by the availability and price of the raw materials and component parts that we use to manufacture our products. Our ability to manage inventory and meet delivery requirements may be constrained by our suppliers’ ability to adjust delivery of long-lead time products during times of volatile demand. The supply chains for our business could also be disrupted by external events such as natural disasters, extreme weather events, labor disputes, governmental actions and legislative or regulatory changes. As a result, our suppliers may fail to perform according to specifications when required and we may be unable to identify alternate suppliers or to otherwise mitigate the consequences of their non-performance. Transitions to new suppliers may result in significant costs and delays, including those related to the required recertification of parts obtained from new suppliers with our customers and/or regulatory agencies. Our inability to fill our supply needs could jeopardize our ability to fulfill obligations under customer contracts, which could result in reduced revenues and profits, contract penalties or terminations, and damage to customer relationships. Further, increased costs of such raw materials or components could reduce our profits if we were unable to pass along such price increases to our customers.

Product specification costs and requirements could cause an increase to our costs to complete contracts.

The costs to meet customer specifications and requirements could result in us having to spend more to design or manufacture products and this could reduce our profit margins on current contracts or those we obtain in the future.

We may incur product liability claims that are not fully insured and such insurance may not be available at commercially reasonable rates.

Our jet engine and aircraft component replacement parts and repair and overhaul services expose our business to potential liabilities for personal injury or death as a result of the failure of an aircraft component that we have designed, manufactured or serviced. While we maintain liability insurance to protect us from future product liability claims, an uninsured or partially insured claim, or a claim for which third-party indemnification is not available, could have a material adverse effect on our business, financial condition and results of operations. Additionally, our customers typically require us to maintain substantial insurance coverage at commercially reasonable rates and our inability to obtain insurance coverage at commercially reasonable rates could have a material adverse effect on our business.

We may incur environmental liabilities and these liabilities may not be covered by insurance.

Our operations and facilities are subject to a number of federal, state and local environmental laws and regulations, which govern, among other things, the discharge of hazardous materials into the air and water as well as the handling, storage and disposal of hazardous materials. Pursuant to various environmental laws, a current or previous owner or operator of real property may be liable for the costs of removal or remediation of hazardous materials. Environmental laws typically impose liability whether or not the owner or operator knew of, or was responsible for, the presence of hazardous materials. Although management believes that our operations and facilities are in material compliance with environmental laws and regulations, future changes in them or interpretations thereof or the nature of our operations may require us to make significant additional capital expenditures to ensure compliance in the future.

We carry limited specific environmental insurance, thus, losses could occur for uninsurable or uninsured risks or in amounts in excess of existing insurance coverage. The occurrence of an event that is not covered in full or in part by insurance could have a material adverse effect on our business, financial condition and results of operations.

We may incur damages or disruption to our business caused by natural disasters and other factors that may not be covered by insurance.

Several of our facilities, as a result of their locations, could be subject to a catastrophic loss caused by hurricanes, tornadoes, earthquakes, floods, fire, power loss, telecommunication and information systems failure, political unrest or similar events. Our corporate headquarters and facilities located in Florida are particularly susceptible to hurricanes, storms, tornadoes or other natural disasters that could disrupt our operations, delay production and shipments, and result in large expenses to repair or replace the facility or facilities. Should insurance or other risk transfer mechanisms, such as our existing disaster recovery and business continuity plans, be insufficient to recover all costs, we could experience a material adverse effect on our business, financial condition and results of operations.

Cyber security events or other disruptions of our information technology systems could adversely affect our business.

We rely on information technology systems, some of which are managed by third parties, to process, transmit and store electronic information, and to manage or support a variety of critical business processes and activities. We also collect and store sensitive data, including confidential business information and personal data. These systems may be susceptible to damage, disruptions or shutdowns due to attacks by computer hackers, computer viruses, employee error or malfeasance, power outages, hardware failures, telecommunication or utility failures, catastrophes or other unforeseen events. In addition, security breaches of our systems could result in the misappropriation or unauthorized disclosure of confidential information or personal data belonging to us or to our employees, partners, customers or suppliers. Any such events could disrupt our operations, delay production and shipments, result in defective products or services, damage customer relationships and our reputation and result in legal claims or proceedings that could have a material adverse effect on our business, financial condition and results of operations.

Tax changes could affect our effective tax rate and future profitability.

We file income tax returns in the U.S. federal jurisdiction, multiple state jurisdictions and certain jurisdictions outside the U.S. In fiscal 2019, our effective tax rate was 17.8%. Our future effective tax rate may be adversely affected by a number of factors, including the following:

  • Changes in statutory tax rates in any of the various jurisdictions where we file tax returns;
  • Changes in available tax credits or tax deductions;
  • Changes in tax laws or the interpretation of such tax laws including interpretations, amendments and technical corrections of the recently enacted Tax Cuts and Jobs Act;
  • Changes to the accounting for income taxes in accordance with generally accepted accounting principles;
  • The amount of net income attributable to noncontrolling interests in our subsidiaries structured as partnerships;
  • Changes in the mix of earnings in jurisdictions with differing statutory tax rates;
  • Adjustments to estimated taxes upon finalization of various tax returns;
  • Resolution of issues arising from tax audits with various tax authorities; and
  • The reversal of any previously experienced tax-exempt unrealized gains in the cash surrender values of life insurance policies related to the HEICO Corporation Leadership Compensation Plan, a nonqualified deferred compensation plan.

Any significant increase in our future effective tax rates could have a material adverse effect on net income for future periods.

We may not have the administrative, operational or financial resources to continue to grow the company.

We have experienced rapid growth in recent periods and intend to continue to pursue an aggressive growth strategy, both through acquisitions and internal expansion of products and services. Our growth to date has placed, and could continue to place, significant demands on our administrative, operational and financial resources. We may not be able to grow effectively or manage our growth successfully, and the failure to do so could have a material adverse effect on our business, financial condition and results of operations.

We are dependent on key personnel and the loss of these key personnel could have a material adverse effect on our success.

Our success substantially depends on the performance, contributions and expertise of our senior management team led by Laurans A. Mendelson, our Chairman and Chief Executive Officer, and Eric A. Mendelson and Victor H. Mendelson, our Co-Presidents. Technical employees are also critical to our research and product development, as well as our ability to continue to re-design sophisticated products of OEMs in order to sell competing replacement parts at substantially lower prices than those manufactured by the OEMs. The loss of the services of any of our executive officers or other key employees or our inability to continue to attract or retain the necessary personnel could have a material adverse effect on our business, financial condition and results of operations.

Our executive officers and directors have significant influence over our management and direction.

As of December 17, 2019, collectively our executive officers and entities controlled by them, the HEICO Savings and Investment Plan (our 401(k) Plan) and members of the Board of Directors beneficially owned approximately 19% of our outstanding Common Stock and approximately 5% of our outstanding Class A Common Stock. Accordingly, they will be able to substantially influence the election of the Board of Directors and control our business, policies and affairs, including our position with respect to proposed business combinations and attempted takeovers.

Properties

As filed, 1,996 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

We own or lease a number of facilities, which are utilized by our Flight Support Group (“FSG”), Electronic Technologies Group (“ETG”) and corporate offices. As of October 31, 2019, all of the facilities listed below were in good operating condition, well maintained and in regular use. We believe that our existing facilities are sufficient to meet our operational needs for the foreseeable future. Summary information on the facilities utilized within the FSG, ETG and our corporate offices to support their principal operating activities is as follows:

Flight Support Group

Location Square Footage Leased Owned Description
United States facilities (13 states) 820,000 260,000 Manufacturing, engineering and distribution facilities, and corporate headquarters
United States facilities (6 states) 193,000 127,000 Repair and overhaul facilities
International facilities (11 countries) - China, France, Germany, India, Laos, Netherlands, Singapore, Spain, Thailand, United Arab Emirates and United Kingdom 129,000 173,000 Manufacturing, engineering and distribution facilities, and sales offices

Electronic Technologies Group

Location Square Footage Leased Owned Description
United States facilities (14 states) 763,000 414,000 Manufacturing and engineering facilities
International facilities (4 countries) - Canada, France, South Korea and United Kingdom 97,000 51,000 Manufacturing and engineering facilities

Corporate

Location Square Footage Leased Owned (1) Description
United States facilities (1 state) — 7,000 Administrative offices

(1) Represents the square footage of our corporate offices in Miami, Florida. The square footage of our corporate headquarters in Hollywood, Florida is included within Square Footage-Owned of the caption “United States facilities (13 states)” under Flight Support Group.

As filed, 332 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

We are involved in various legal actions arising in the normal course of business. Based upon the Company’s and our legal counsel’s evaluations of any claims or assessments, management is of the opinion that the outcome of these matters will not have a material effect on our results of operations, financial position or cash flows.

Management's discussion and analysis

As filed, 41,963 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Overview

Our business is comprised of two operating segments, the Flight Support Group (“FSG”) and the Electronic Technologies Group (“ETG”).

The Flight Support Group consists of HEICO Aerospace Holdings Corp. (“HEICO Aerospace”), which is 80% owned, and HEICO Flight Support Corp., which is wholly owned, and their collective subsidiaries, which primarily:

  • Designs, Manufactures, Repairs, Overhauls and Distributes Jet Engine and Aircraft Component Replacement Parts. The Flight Support Group designs, manufactures, repairs, overhauls and distributes jet engine and aircraft component replacement parts. The parts and services are approved by the Federal Aviation Administration (“FAA”). The Flight Support Group also manufactures and sells specialty parts as a subcontractor for aerospace and industrial original equipment manufacturers and the United States ("U.S.") government. Additionally, the Flight Support Group is a leading supplier, distributor, and integrator of military aircraft parts and support services primarily to foreign military organizations allied with the U.S. and a leading manufacturer of advanced niche components and complex composite assemblies for commercial aviation, defense and space applications. Further, the Flight Support Group engineers, designs and manufactures thermal insulation blankets and parts as well as removable/reusable insulation systems for aerospace, defense, commercial and industrial applications, manufactures expanded foil mesh for lightning strike protection in fixed and rotary wing aircraft and is a distributor of aviation electrical interconnect products and electromechanical parts.

The Electronic Technologies Group consists of HEICO Electronic Technologies Corp. (“HEICO Electronic”) and its subsidiaries, which primarily:

  • Designs and Manufactures Electronic, Microwave and Electro-Optical Equipment, High-Speed Interface Products, High Voltage Interconnection Devices and High Voltage Advanced Power Electronics. The Electronic Technologies Group collectively designs, manufactures and sells various types of electronic, data and microwave, and electro-optical products, including power supplies, laser rangefinder receivers, infrared simulation, calibration and testing equipment; power conversion products serving the high-reliability military, space and commercial avionics end-markets; underwater locator beacons used to locate data and voice recorders utilized on aircraft and marine vessels; emergency locator beacons utilized on commercial and military aircraft; electromagnetic interference shielding for commercial and military aircraft operators, electronics companies and telecommunication equipment suppliers; traveling wave tube amplifiers and microwave power modules used in radar, electronic warfare and on-board jamming and countermeasure systems; advanced high-technology interface products that link devices such as telemetry receivers, digital cameras, high resolution scanners, simulation systems

and test systems to computers; high voltage energy generators, high voltage interconnection devices, cable assemblies and wire for the medical equipment, defense and other industrial markets; high voltage power supplies found in satellite communications, CT scanners and in medical and industrial x-ray systems; three-dimensional microelectronic and stacked memory products that are principally integrated into larger subsystems equipping satellites and spacecraft; harsh environment connectivity products and custom molded cable assemblies; radio frequency ("RF") and microwave amplifiers, transmitters and receivers used to support military communications on unmanned aerial systems, other aircraft, helicopters and ground-based data/communications systems; communications and electronic intercept receivers and tuners for military and intelligence applications; wireless cabin control systems, solid state power distribution and management systems and fuel level sensing systems for business jets and for general aviation, as well as for the military/defense market; microwave modules, units and integrated sub-systems for commercial and military satellites; crashworthy and ballistically self-sealing auxiliary fuel systems for military rotorcraft; nuclear radiation detectors for law enforcement, homeland security and military applications; high performance active antenna systems for commercial aircraft, precision guided munitions, other defense applications and commercial uses; silicone material for a variety of demanding applications; precision power analog monolithic, hybrid and open frame components for a certain wide range of defense, industrial and medical applications; high-reliability ceramic-to-metal feedthroughs and connectors used in the industrial and medical markets; technical surveillance countermeasures equipment to detect devices used for espionage and information theft; and RF sources, detectors, and controllers for a certain wide range of aerospace and defense applications.

Our results of operations have been affected by recent acquisitions as further detailed in Note 2, Acquisitions, of the Notes to Consolidated Financial Statements.

Presentation of Results of Operations and Liquidity and Capital Resources

The following discussion and analysis of our Results of Operations and Liquidity and Capital Resources includes a comparison of fiscal 2019 to fiscal 2018. A similar discussion and analysis that compares fiscal 2018 to fiscal 2017 may be found in Item 7, "Management’s Discussion and Analysis of Financial Condition and Results of Operations,” of our Form 10-K for the fiscal year ended October 31, 2018.

Results of Operations

The following table sets forth the results of our operations, net sales and operating income by segment and the percentage of net sales represented by the respective items in our Consolidated Statements of Operations (in thousands):

Year ended October 31, 2019 2018
Net sales $2,055,647 $1,777,721
Cost of sales 1,241,807 1,087,006
Selling, general and administrative expenses 356,743 314,470
Total operating costs and expenses 1,598,550 1,401,476
Operating income $457,097 $376,245
Net sales by segment:
Flight Support Group $1,240,183 $1,097,937
Electronic Technologies Group 834,522 701,827
Intersegment sales (19,058) (22,043)
$2,055,647 $1,777,721
Operating income by segment:
Flight Support Group $242,029 $206,623
Electronic Technologies Group 245,743 204,508
Other, primarily corporate (30,675) (34,886)
$457,097 $376,245
Net sales 100.0% 100.0%
Gross profit 39.6% 38.9%
Selling, general and administrative expenses 17.4% 17.7%
Operating income 22.2% 21.2%
Interest expense 1.1% 1.1%
Other income (expense) .1% —%
Income tax expense 3.8% 4.0%
Net income attributable to noncontrolling interests 1.5% 1.5%
Net income attributable to HEICO 16.0% 14.6%

33

Comparison of Fiscal 2019 to Fiscal 2018

Net Sales

Our consolidated net sales in fiscal 2019 increased by 16% to a record $2,055.6 million, up from net sales of $1,777.7 million in fiscal 2018. The increase in consolidated net sales principally reflects an increase of $132.7 million (a 19% increase) to a record $834.5 million in net sales within the ETG and an increase of $142.2 million (a 13% increase) to a record $1,240.2 million in net sales within the FSG. The net sales increase in the ETG reflects organic growth of 10% and net sales of $66.1 million contributed by fiscal 2019 and 2018 acquisitions. The ETG's organic growth is mainly attributable to increased demand for our defense and aerospace products resulting in net sales increases of $60.6 million and $14.0 million, respectively. The net sales increase in the FSG principally reflects organic growth of 13%. The FSG's organic growth is mainly attributable to increased demand and new product offerings within our aftermarket replacement parts, specialty products and repair and overhaul services product lines resulting in net sales increases of $95.4 million, $31.5 million and $10.8 million, respectively. Sales price changes were not a significant contributing factor to the ETG and FSG net sales growth in fiscal 2019.

Our net sales in fiscal 2019 and 2018 by market consisted of approximately 52% and 53% from the commercial aviation industry, respectively, 35% from the defense and space industries in both periods and and 13% and 12% from other industrial markets including electronics, medical and telecommunications, respectively.

Gross Profit and Operating Expenses

Our consolidated gross profit margin increased to 39.6% in fiscal 2019, up from 38.9% in fiscal 2018, principally reflecting an increase of .9% and .4% in the ETG's and FSG's gross profit margins, respectively. The increase in the ETG’s gross profit margin is principally attributable to increased net sales and a more favorable product mix for certain defense products. The increase in the FSG's gross profit margin is principally attributable to the previously mentioned higher net sales within our aftermarket replacement parts product line. Total new product research and development expenses included within our consolidated cost of sales were $66.6 million in fiscal 2019 compared to $57.5 million in fiscal 2018.

Our consolidated selling, general and administrative ("SG&A") expenses were $356.7 million and $314.5 million in fiscal 2019 and 2018, respectively. The increase in consolidated SG&A expenses principally reflects $21.6 million attributable to the fiscal 2019 and 2018 acquisitions, $9.1 million of higher performance-based compensation expense and $3.8 million attributable to changes in the estimated fair value of accrued contingent consideration.

Our consolidated SG&A expenses as a percentage of net sales decreased to 17.4% in fiscal 2019, down from 17.7% in fiscal 2018. The decrease in consolidated SG&A expenses as a percentage of net sales principally reflects efficiencies realized from the net sales growth.

Operating Income

Our consolidated operating income increased by 21% to a record $457.1 million in fiscal 2019, up from $376.2 million in fiscal 2018. The increase in consolidated operating income principally reflects a $41.2 million increase (a 20% increase) to a record $245.7 million in operating income of the ETG and a $35.4 million increase (a 17% increase) to a record $242.0 million in operating income of the FSG. The increase in operating income of the ETG and FSG is principally attributable to the previously mentioned net sales growth and improved gross profit margins. Further, the operating income of the ETG in fiscal 2019 reflects $5.4 million of higher performance-based compensation expense and $2.7 million of higher acquisition-related costs.

Our consolidated operating income as a percentage of net sales improved to 22.2% in fiscal 2019, up from 21.2% in fiscal 2018. The increase principally reflects an increase in the FSG's operating income as a percentage of net sales to 19.5% in fiscal 2019, up from 18.8% in fiscal 2018 and an increase in the ETG’s operating income as a percentage of net sales to 29.4% in fiscal 2019, up from 29.1% in fiscal 2018. The increase in the FSG's and ETG's operating income as a percentage of net sales principally reflects the previously mentioned improved gross profit margins and efficiencies realized from the net sales growth. Further, the ETG's operating income as a percentage of net sales in fiscal 2019 reflects a .6% increase in SG&A expenses as a percentage of net sales mainly from the previously mentioned higher performance-based compensation expense and higher acquisition-related costs.

Interest Expense

Interest expense increased to $21.7 million in fiscal 2019, up from $19.9 million in fiscal 2018. The increase was principally due to higher interest rates partially offset by a lower weighted average balance outstanding under our revolving credit facility.

Other Income (Expense)

Other income (expense) in fiscal 2019 and 2018 was not material.

Income Tax Expense

In December 2017, the United States ("U.S.") government enacted comprehensive tax legislation commonly referred to as the Tax Cuts and Jobs Act (the “Tax Act”). The Tax Act contains significant changes to previous tax law, some of which became immediately effective in fiscal 2018 including, among other things, a reduction in the U.S. federal statutory tax rate from 35% to 21% effective January 1, 2018 resulting in a blended rate of 23.3% for fiscal 2018 and the implementation of a territorial tax system resulting in a one-time transition tax on the unremitted earnings of our foreign subsidiaries. Certain other provisions of the Tax Act became effective for HEICO in fiscal 2019 including a new tax on Global Intangible Low-Taxed Income (“GILTI”), a new deduction for Foreign-Derived Intangible Income (“FDII”), the repeal of the domestic production activity deduction and increased limitations on the deductibility of certain executive compensation. As a result of the Tax Act, we remeasured our U.S. federal net deferred tax liabilities and recorded a discrete tax benefit of $16.5 million in fiscal 2018. Further, we recorded a provisional discrete tax expense of $4.4 million in fiscal 2018 related to a one-time transition tax on the unremitted earnings of our foreign subsidiaries, which we intend to pay over the eight-year period allowed for in the Tax Act.

Our effective tax rate in fiscal 2019 decreased to 17.8% from 19.8% in fiscal 2018. The decrease in our effective tax rate in fiscal 2019 is mainly attributable to a $14.3 million larger tax benefit in fiscal 2019 from stock option exercises compared to fiscal 2018 and the reduction in the federal tax rate from a blended rate of 23.3% in fiscal 2018 to 21% in fiscal 2019, partially offset by the net impact of the previously mentioned discrete tax amounts recorded in fiscal 2018. The provisions of the Tax Act that became effective for us in fiscal 2019 did not have a material net effect on our effective tax rate.

Net Income Attributable to Noncontrolling Interests

Net income attributable to noncontrolling interests relates to the 20% noncontrolling interest held by Lufthansa Technik AG in HEICO Aerospace Holdings Corp. and the noncontrolling interests held by others in certain subsidiaries of the FSG and ETG. Net income attributable to noncontrolling interests was $31.8 million in fiscal 2019 as compared to $26.5 million in fiscal 2018. The increase in net income attributable to noncontrolling interests in fiscal 2019 principally reflects improved operating results of certain subsidiaries of the FSG and ETG in which noncontrolling interests are held.

Net Income Attributable to HEICO

Net income attributable to HEICO increased to a record $327.9 million, or $2.39 per diluted share, in fiscal 2019, up from $259.2 million, or $1.90 per diluted share, in fiscal 2018 principally reflecting the previously mentioned increased net sales and operating income.

Outlook

As we look ahead to fiscal 2020, we anticipate net sales growth within the FSG's commercial aviation and defense product lines. We also expect growth within the ETG, principally driven by demand for the majority of our products. During fiscal 2020, we plan to continue our commitments to developing new products and services, further market penetration, and an aggressive acquisition strategy while maintaining our financial strength and flexibility. Overall, we are targeting growth in fiscal 2020 full year net sales and net income over fiscal 2019 levels. This outlook excludes the impact of additional acquired businesses, if any.

Inflation

We have generally experienced increases in our costs of labor, materials and services consistent with overall rates of inflation. The impact of such increases on net income attributable to HEICO has been generally minimized by efforts to lower costs through manufacturing efficiencies and cost reductions.

Liquidity and Capital Resources

The following table summarizes our capitalization (in thousands):

As of October 31, 2019 2018
Cash and cash equivalents $57,001 $59,599
Total debt (including current portion) 561,955 532,470
Shareholders’ equity 1,694,660 1,503,008
Total capitalization (debt plus equity) 2,256,615 2,035,478
Total debt to total capitalization 25% 26%

Our principal uses of cash include acquisitions, capital expenditures, cash dividends, distributions to noncontrolling interests and working capital needs. Capital expenditures in fiscal 2020 are anticipated to approximate $42 million. We finance our activities primarily from our operating and financing activities, including borrowings under our revolving credit facility.

As of December 17, 2019, we had approximately $741 million of unused committed availability under the terms of our revolving credit facility. Based on our current outlook, we believe that net cash provided by operating activities and available borrowings under our revolving credit facility will be sufficient to fund our cash requirements for at least the next twelve months.

Operating Activities

Net cash provided by operating activities was $437.4 million in fiscal 2019 and consisted primarily of net income from consolidated operations of $359.7 million, depreciation and amortization expense of $83.5 million (a non-cash item), net changes in other long-term liabilities and assets related to the HEICO Leadership Compensation Plan ("LCP") of $12.9 million (principally participant deferrals and employer contributions) and $10.3 million in share-based compensation expense (a non-cash item), partially offset by a $32.3 million increase in working capital. Net cash provided by operating activities increased by $108.9 million in fiscal 2019 from $328.5 million in fiscal 2018. The increase is principally attributable to a $74.1 million increase in net income from consolidated operations, an $18.4 million decrease in net working capital, a $6.6 million decrease in deferred income tax benefits, and a $6.3 million increase in depreciation and amortization expense. The decrease in net working capital mainly resulted from decreases in inventories and contract assets and an increase in income taxes payable, partially offset by a decrease in trade accounts payable.

Net cash provided by operating activities was $328.5 million in fiscal 2018 and consisted primarily of net income from consolidated operations of $285.7 million, depreciation and amortization expense of $77.2 million (a non-cash item) and net changes in other long-term liabilities and assets related to the HEICO LCP of $11.6 million (principally participant deferrals and employer contributions), partially offset by a $50.6 million increase in working capital mainly reflecting an increase in inventories to support the growth of our businesses and anticipated higher demand during fiscal 2019.

Investing Activities

Net cash used in investing activities totaled $280.6 million in fiscal 2019 and related primarily to acquisitions of $240.8 million (net of cash acquired), capital expenditures of $28.9 million and investments related to the HEICO LCP of $13.7 million. Further details on acquisitions may be found in Note 2, Acquisitions, of the Notes to Consolidated Financial Statement.

Net cash used in investing activities totaled $113.5 million in fiscal 2018 and related primarily to acquisitions of $59.8 million (net of cash acquired), capital expenditures of $41.9 million and investments related to the HEICO LCP of $11.5 million. Further details on acquisitions may be found in Note 2, Acquisitions, of the Notes to Consolidated Financial Statement.

Financing Activities

Net cash used in financing activities in fiscal 2019 totaled $159.7 million. During fiscal 2019, we made $283.0 million in payments on our revolving credit facility, paid $110.9 million in distributions to noncontrolling interests, redeemed common stock related to stock option exercises aggregating $64.0 million and paid $18.7 million in cash dividends on our common stock. Additionally, we borrowed $313.0 million under our revolving credit facility to fund certain of our fiscal 2019 acquisitions and a certain distribution to a noncontrolling interest holder.

Net cash used in financing activities in fiscal 2018 totaled $207.5 million. During fiscal 2018, we made payments on our revolving credit facility aggregating $204.0 million, redeemed common stock related to stock option exercises aggregating $25.0 million, paid $15.4 million in cash dividends on our common stock and made distributions to noncontrolling interests aggregating $13.1 million. Additionally, we borrowed $56.0 million on our revolving credit facility principally for tax payments, to fund a fiscal 2018 acquisition and for capital expenditures.

In November 2017, we entered into a $1.3 billion Revolving Credit Facility Agreement ("Credit Facility") with a bank syndicate, which matures in November 2022. Under certain circumstances, the maturity of the Credit Facility may be extended for two one-year periods. The Credit Facility also includes a feature that will allow us to increase the capacity by $350 million to become a $1.65 billion facility through increased commitments from existing lenders or the addition of new lenders. Borrowings under the Credit Facility may be used to finance acquisitions and for working capital and other general corporate purposes, including capital expenditures.

Borrowings under the Credit Facility accrue interest at our election of the Base Rate or the Eurocurrency Rate, plus in each case, the Applicable Rate (based on our Total Leverage Ratio). The Base Rate for any day is a fluctuating rate per annum equal to the highest of (i) the Prime Rate; (ii) the Federal Funds Rate plus .50%; and (iii) the Eurocurrency Rate for an Interest Period of one month plus 100 basis points. The Eurocurrency Rate is the rate per annum obtained by dividing LIBOR for the applicable Interest Period by a percentage equal to 1.00 minus the daily average Eurocurrency Reserve Rate for such Interest Period, as such capitalized terms are defined in the Credit Facility. The Applicable Rate for Eurocurrency Rate Loans ranges from 1.00% to 2.00%. The Applicable Rate for Base Rate Loans ranges from 0% to 1.00%. A fee is charged on the amount of the unused commitment ranging from .125% to .30% (depending on our Total Leverage Ratio). The Credit Facility also includes $100 million sublimits for borrowings made in foreign currencies and for swingline borrowings, and a $50 million sublimit for letters of credit. Outstanding principal, accrued and unpaid interest and other amounts payable under the Credit Facility may be accelerated upon an event of default, as such events are described in the Credit Facility. The Credit Facility is unsecured and contains covenants that require, among other things, the maintenance of a Total Leverage Ratio and an Interest Coverage Ratio, as such capitalized terms are defined in the Credit Facility. We were in compliance with all financial and nonfinancial covenants of the Credit Facility as of October 31, 2019.

Contractual Obligations

The following table summarizes our contractual obligations as of October 31, 2019

(in thousands):

Total Payments due by fiscal period 2020 2021 - 2022 2023 - 2024 Thereafter
Long-term debt obligations (1) $553,320 $62 $129 $553,106 $23
Estimated interest payments (1) 50,310 16,724 33,358 228 —
Capital lease obligations (2) 10,962 1,213 2,415 1,738 5,596
Operating lease obligations (3) 76,947 15,508 29,371 13,256 18,812
Purchase obligations (4) (5) (6) 21,666 2,711 2,253 16,702 —
Other long-term liabilities (7) 8,052 1,976 2,448 1,756 1,872
Total contractual obligations $721,257 $38,194 $69,974 $586,786 $26,303

(1) Estimated interest payments assumes the $553.0 million outstanding balance under our revolving credit facility and related interest rate of 3.0% as of October 31, 2019, will remain constant through the credit facility's maturity date in fiscal 2023. Actual interest payments may vary significantly based on future borrowings, repayments and interest rate fluctuations. See Note 5, Long-Term Debt, of the Notes to Consolidated Financial Statements and "Liquidity and Capital Resources," above for additional information regarding our long-term debt obligations.

(2) Inclusive of $2.3 million in interest charges. See Note 5, Long-Term Debt, of the Notes to Consolidated Financial Statements for additional information regarding our capital lease obligations.

(3) See Note 16, Commitments and Contingencies – Lease Commitments, of the Notes to Consolidated Financial Statements for additional information regarding our operating lease obligations.

(4) Includes contingent consideration aggregating $18.3 million related to a fiscal 2016, 2017 and 2019 acquisition. See Note 8, Fair Value Measurements, of the Notes to Consolidated Financial Statements for additional information.

(5) Also includes an aggregate $3.3 million of commitments principally for capital expenditures and inventory. All purchase obligations of inventory and supplies in the ordinary course of business (i.e., with deliveries scheduled within the next year) are excluded from the table.

(6) The holders of equity interests in certain of our subsidiaries have rights (“Put Rights”) that may be exercised on varying dates causing us to purchase their equity interests through fiscal 2029. The Put Rights provide that cash consideration be paid for their equity interests (the “Redemption Amount”). As of October 31, 2019, management’s estimate of the aggregate Redemption Amount of all Put Rights that we could be required to pay is approximately $188.3 million, which is reflected within redeemable noncontrolling interests in our Consolidated Balance Sheet. The amounts in the table do not include Put Right obligations as none of the noncontrolling interest holders have exercised their Put Rights as of October 31, 2019. See Note 12, Redeemable Noncontrolling Interests, of the Notes to Consolidated Financial Statements for further information.

(7) The amounts in the table do not include liabilities related to the HEICO LCP as they are fully supported by assets held within irrevocable trusts. See Note 3, Selected Financial Statement Information - Other Long-Term Assets and Liabilities, of the Notes to Consolidated Financial Statements for further information about this deferred compensation plan.

Off-Balance Sheet Arrangements

Guarantees

As of October 31, 2019, we have arranged for standby letters of credit aggregating $4.1 million, which are supported by our revolving credit facility and pertain to payment guarantees related to potential workers' compensation claims and a facility lease as well as performance guarantees related to customer contracts entered into by certain of our subsidiaries.

Critical Accounting Policies

We believe that the following are our most critical accounting policies, which require management to make judgments about matters that are inherently uncertain.

Assumptions utilized to determine fair value in connection with business combinations, contingent consideration arrangements and in goodwill and intangible assets impairment tests are highly judgmental. If there is a material change in such assumptions or if there is a material change in the conditions or circumstances influencing fair value, we could be required to recognize a material impairment charge. See Item 1A., Risk Factors, for a list of factors which may cause our actual results to differ materially from anticipated results.

Revenue Recognition

During fiscal 2019, we adopted Accounting Standards Update 2014-09, which, as amended, was codified as Accounting Standard Codification ("ASC") Topic 606, "Revenue from Contracts with Customers" ("ASC 606"). Pursuant to ASC 606, HEICO recognizes revenue when it transfers control of a promised good or service to a customer in an amount that reflects the consideration it expects to receive in exchange for the good or service. Our performance obligations are satisfied and control is transferred either at a point-in-time or over-time. The majority of our revenue is recognized at a point-in-time when control is transferred, which is generally evidenced by the shipment or delivery of the product to the customer, a transfer of title, a transfer of the significant risks and rewards of ownership, and customer acceptance. For certain contracts under which we produce products with no alternative use and for which we have an enforceable right to recover costs incurred plus a reasonable profit margin for work completed to date and for certain other contracts under which we create or enhance a customer-owned asset while performing repair and overhaul services, control is transferred to the customer over-time. HEICO recognizes revenue using an over-time recognition model for these types of contracts.

We utilize the cost-to-cost method as a measure of progress for performance obligations that are satisfied over-time as we believe this input method best represents the transfer of control to the customer. Under this method, revenue for the current period is recorded at an amount equal to the ratio of costs incurred to date divided by total estimated contract costs multiplied by (i) the transaction price, less (ii) cumulative revenue recognized in prior periods. Contract costs include all direct material and labor costs and those indirect costs related to contract performance, such as indirect labor, supplies, tools, repairs and depreciation.

Under the cost-to-cost method, the extent of progress toward completion is measured based on the proportion of costs incurred to date to the total estimated costs at completion of the performance obligation. These projections require management to make numerous assumptions and estimates relating to items such as the complexity of design and related development costs, performance of subcontractors, availability and cost of materials, labor productivity and cost, overhead, capital costs, and manufacturing efficiency. We review our cost estimates on a periodic basis, or when circumstances change and warrant a modification to a previous estimate. Cost estimates are largely based on negotiated or estimated purchase contract terms, historical performance trends and other economic projections.

For certain contracts with similar characteristics and for which revenue is recognized using an over-time model, we use a portfolio approach to estimate the amount of revenue to recognize. For each portfolio of contracts, the respective work in process and/or finished goods inventory balances are identified and the portfolio-specific margin is applied to estimate the pro rata portion of the transaction price to recognize in relation to the costs incurred. This approach is utilized only when the resulting revenue recognition is not expected to be materially different than if the accounting was applied to the individual contracts.

Certain of our contracts give rise to variable consideration when they contain items such as customer rebates, credits, volume purchase discounts, penalties and other provisions that may impact the total consideration we will receive. We include variable consideration in the transaction price generally by applying the most likely amount method of the consideration that we expect to be entitled to receive based on an assessment of all available information (i.e., historical experience, current and forecasted performance) and only to the extent it is probable that a significant reversal of revenue recognized will not occur when the uncertainty is resolved. We estimate variable consideration by applying the most likely amount method when there are a limited number of outcomes related to the resolution of the variable consideration.

Changes in estimates that result in adjustments to net sales and cost of sales are recognized as necessary in the period they become known on a cumulative catch-up basis. Changes in estimates did not have a material effect on net income from consolidated operations in fiscal 2019, 2018 and 2017.

Valuation of Inventory

Inventory is stated at the lower of cost or net realizable value, with cost being determined on the first-in, first-out or the average cost basis. Losses, if any, are recognized fully in the period when identified.

We periodically evaluate the carrying value of inventory, giving consideration to factors such as its physical condition, sales patterns and expected future demand in order to estimate the amount necessary to write down any slow moving, obsolete or damaged inventory. These estimates could vary significantly from actual amounts based upon future economic conditions, customer inventory levels, or competitive factors that were not foreseen or did not exist when the estimated write-downs were made.

In accordance with industry practice, all inventories are classified as a current asset including portions with long production cycles, some of which may not be realized within one year.

Business Combinations

We allocate the purchase price of acquired entities to the underlying tangible and identifiable intangible assets acquired and liabilities and any noncontrolling interests assumed based on their estimated fair values, with any excess recorded as goodwill. Determining the fair value of assets acquired and liabilities and noncontrolling interests assumed requires management’s judgment and often involves the use of significant estimates and assumptions, including assumptions with respect to future cash inflows and outflows, discount rates, asset lives and market multiples, among other items. We determine the fair values of intangible assets acquired generally in consultation with third-party valuation advisors.

As part of the agreement to acquire certain subsidiaries, we may be obligated to pay contingent consideration should the acquired entity meet certain earnings objectives subsequent to the date of acquisition. As of the acquisition date, contingent consideration is recorded at fair value as determined through the use of a probability-based scenario analysis approach. Under this method, a set of discrete potential future subsidiary earnings is determined using internal estimates based on various revenue growth rate assumptions for each scenario. A probability of likelihood is then assigned to each discrete potential future earnings estimate and the resultant contingent consideration is calculated and discounted using a weighted average discount rate reflecting the credit risk of HEICO. Subsequent to the acquisition date, the fair value of such contingent consideration is measured each reporting period and any changes are recorded to SG&A expenses within our Consolidated Statements of Operations. Changes in either the revenue growth rates, related earnings or the discount rate could result in a material change to the amount of contingent consideration accrued. As of October 31, 2019, 2018 and 2017, $18.3 million, $20.9 million and $27.6 million of contingent consideration was accrued within our Consolidated Balance Sheets, respectively. During fiscal 2019, 2018 and 2017, such fair value measurement adjustments resulted in net increases (decreases) to SG&A expenses of $2.6 million, ($1.4) million and $1.1 million, respectively. For further information regarding our contingent consideration arrangements, see Note 8, Fair Value Measurements, of the Notes to Consolidated Financial Statements.

Valuation of Goodwill and Other Intangible Assets

We test goodwill for impairment annually as of October 31, or more frequently if events or changes in circumstances indicate that the carrying amount of goodwill may not be fully recoverable. In evaluating the recoverability of goodwill, we compare the fair value of each of our reporting units to its carrying value to determine potential impairment. If the carrying value of a reporting unit exceeds its fair value, the implied fair value of that reporting unit’s goodwill is to be calculated and an impairment loss is recognized in the amount by which the carrying value of the reporting unit’s goodwill exceeds its implied fair value, if any. The fair values of our reporting units were determined using a weighted average of a market approach and an income approach. Under the market approach, fair values are estimated using published market multiples for comparable companies. We calculate fair values under the income approach by taking estimated future cash flows that are based on internal projections and other assumptions deemed reasonable by management and discounting them using an estimated weighted average cost of capital. Based on the annual goodwill impairment test as of October 31, 2019, 2018 and 2017, we determined there was no impairment of our goodwill. The fair value of each of our reporting units as of October 31, 2019 significantly exceeded its carrying value.

We test each non-amortizing intangible asset (principally trade names) for impairment annually as of October 31, or more frequently if events or changes in circumstances indicate that the asset might be impaired. To derive the fair value of our trade names, we utilize an income approach, which relies upon management's assumptions of royalty rates, projected revenues and discount rates. We also test each amortizing intangible asset for impairment if events or circumstances indicate that the asset might be impaired. The test consists of determining whether the carrying value of such assets will be recovered through undiscounted expected future cash flows. If the total of the undiscounted future cash flows is less than the carrying amount of those assets, we recognize an impairment loss based on the excess of the carrying amount over the fair value of the assets. The determination of fair value requires us to make a number of estimates, assumptions and judgments of underlying factors such as projected revenues and related earnings as well as discount rates. Based on the intangible asset impairment tests conducted, we did not recognize any impairment losses in fiscal 2019, 2018 and 2017.

New Accounting Pronouncements

See Note 1, Summary of Significant Accounting Policies - New Accounting Pronouncements, of the Notes to Consolidated Financial Statements for additional information.

Forward-Looking Statements

Certain statements in this report constitute “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. All statements contained herein that are not clearly historical in nature may be forward-looking and the words “anticipate,” “believe,” “expect,” “estimate” and similar expressions are generally intended to identify forward-looking statements. Any forward-looking statement contained herein, in press releases, written statements or other documents filed with the Securities and Exchange Commission or in communications and discussions with investors and analysts in the normal course of business through meetings, phone calls and conference calls, concerning our operations, economic performance and financial condition are subject to risks, uncertainties and contingencies. We have based these forward-looking statements on our current expectations and projections about future events. All forward-looking statements involve risks and uncertainties, many of which are beyond our control, which may cause actual results, performance or achievements to differ materially from anticipated results, performance or achievements. Also, forward-looking statements are based upon management’s estimates of fair values and of future costs, using currently available information. Therefore, actual results may differ materially from those expressed in or implied by those forward-looking statements. Factors that could cause such differences include:

  • Lower demand for commercial air travel or airline fleet changes or airline purchasing decisions, which could cause lower demand for our goods and services;
  • Product specification costs and requirements, which could cause an increase to our costs to complete contracts;
  • Governmental and regulatory demands, export policies and restrictions, reductions in defense, space or homeland security spending by U.S. and/or foreign customers or competition from existing and new competitors, which could reduce our sales;
  • Our ability to introduce new products and services at profitable pricing levels, which could reduce our sales or sales growth;
  • Product development or manufacturing difficulties, which could increase our product development costs and delay sales;
  • Our ability to make acquisitions and achieve operating synergies from acquired businesses; customer credit risk; interest, foreign currency exchange and income tax rates; economic conditions within and outside of the aviation, defense, space, medical, telecommunications and electronics industries, which could negatively impact our costs and revenues; and
  • Defense spending or budget cuts, which could reduce our defense-related revenue.

For further information on these and other factors that potentially could materially affect our financial results, see Item 1A, Risk Factors. We undertake no obligation to publicly update or revise any forward-looking statement, whether as a result of new information, future events or otherwise, except to the extent required by applicable law.

Market risk

As filed, 1,636 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Interest Rate Risk

We have exposure to interest rate risk, mainly related to our revolving credit facility, which has variable interest rates. Interest rate risk associated with our variable rate debt is the potential increase in interest expense from an increase in interest rates. Based on our aggregate outstanding variable rate debt balance of $553.0 million as of October 31, 2019, a hypothetical 10% increase in interest rates would not have a material effect on our results of operations, financial position or cash flows. We also maintain a portion of our cash and cash equivalents in financial instruments with original maturities of three months or less. These financial instruments are subject to interest rate risk and will decline in value if interest rates increase. Due to the short duration of these financial instruments, a hypothetical 10% increase in interest rates as of October 31, 2019 would not have a material effect on our results of operations, financial position or cash flows.

Foreign Currency Risk

We have several foreign subsidiaries that conduct a portion of their operations in currencies other than the U.S. dollar, or principally in Euros. Accordingly, changes in exchange rates between such foreign currencies and the U.S. dollar will affect the translation of the financial results of our foreign subsidiaries into the U.S. dollar for purposes of reporting our consolidated financial results. A hypothetical 10% weakening in the exchange rate of the Euro to the U.S. dollar as of October 31, 2019 would not have a material effect on our results of operations, financial position or cash flows.

Controls and procedures

As filed, 9,874 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Evaluation of Disclosure Controls and Procedures

The Company’s management, with the participation of the Company’s Chief Executive Officer and its Chief Financial Officer, evaluated the effectiveness of the Company’s disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) as of the end of the period covered by this annual report. Based upon that evaluation, the Company’s Chief Executive Officer and its Chief Financial Officer concluded that the Company’s disclosure controls and procedures are effective as of the end of the period covered by this annual report.

Management’s Annual Report on Internal Control Over Financial Reporting

Management of HEICO Corporation is responsible for establishing and maintaining adequate internal control over financial reporting for the Company. Internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that in reasonable detail accurately and fairly reflect the transactions and dispositions of the assets of the Company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the Company are being made only in accordance with authorizations of management and directors of the Company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of the Company’s assets that could have a material effect on the financial statements.

Because of inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Projections of any evaluation of effectiveness to future periods are subject to the risks that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

Management, under the supervision of and with the participation of the Company’s Chief Executive Officer and the Chief Financial Officer, assessed the effectiveness of the Company’s internal control over financial reporting based on the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission in Internal Control - Integrated Framework (2013). Based on its assessment, management concluded that the Company’s internal control over financial reporting is effective as of October 31, 2019.

As permitted by the Securities and Exchange Commission, companies are allowed to exclude acquisitions from their assessment of internal control over financial reporting during the first year of an acquisition and management elected to exclude TTT-Cubed, Inc., Bernier Connect SAS, Research Electronics International, LLC, Decavo LLC, Solid Sealing Technology, Inc., Freebird Semiconductor Corporation, Apex Microtechnology, Inc. and Specialty Silicone Products, Inc. (collectively, the "Excluded Acquisitions") from its assessment of internal control over financial reporting as of October 31, 2019. See Note 2, Acquisitions, of the Notes to Consolidated Financial Statements for additional information. The aggregate assets and net sales of the Excluded Acquisitions constituted 10.2% and 3.3% of the Company's consolidated total assets and net sales as of and for the year ended October 31, 2019, respectively.

Deloitte & Touche LLP, an independent registered public accounting firm, audited the Company’s consolidated financial statements and financial statement schedule included in this Annual Report on Form 10-K for the year ended October 31, 2019. A copy of their report is included in Item 8, Financial Statements and Supplementary Data, of this Annual Report on Form 10-K. Deloitte & Touche LLP has issued their attestation report on management’s internal control over financial reporting, which is set forth below.

Changes in Internal Control Over Financial Reporting

There have been no changes in the Company’s internal control over financial reporting during the fourth quarter ended October 31, 2019 that have materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting.

As described in Management's Annual Report on Internal Control Over Financial Reporting, the Company made several acquisitions during fiscal 2019 and is in the process of integrating each one into its overall internal control over financial reporting process.

Attestation Report of the Company's Independent Registered Public Accounting Firm

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Shareholders of

HEICO Corporation

Hollywood, Florida

Opinion on Internal Control over Financial Reporting

We have audited the internal control over financial reporting of HEICO Corporation and subsidiaries (the "Company") as of October 31, 2019, based on criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). In our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of October 31, 2019, based on criteria established in Internal Control - Integrated Framework (2013) issued by COSO.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the consolidated financial statements and financial statement schedule as of and for the year ended October 31, 2019 of the Company and our report dated December 19, 2019 expressed an unqualified opinion on those financial statements and financial statement schedule.

Basis for Opinion

As described in Management's Annual Report on Internal Control Over Financial Reporting, management excluded from its assessment the internal control over financial reporting at TTT-Cubed, Inc., Bernier Connect SAS, Research Electronics International, LLC, Decavo LLC, Solid Sealing Technology, Inc., Freebird Semiconductor Corporation, Apex Microtechnology, Inc. and Specialty Silicone Products, Inc., (collectively, the "Excluded Acquisitions") which were acquired during the year ended October 31, 2019, and whose financial statements constitute 10.2% of total assets and 3.3% of net sales of the Company's consolidated financial statement amounts as of and for the year ended October 31, 2019, respectively. Accordingly, our audit did not include the internal control over financial reporting of the Excluded Acquisitions. The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Annual Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

Definition and Limitations of Internal Control over Financial Reporting

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

/s/ DELOITTE & TOUCHE LLP

Miami, Florida

December 19, 2019

Figures reported in this filing

Standardized line items from the XBRL in this filing, for the period ended 2019-10-31. Comparative periods it repeats are left out.

Figures reported in this filing
Line itemPeriodValueXBRL concept
Revenue3 months2019-08-01 to 2019-10-31$541.5mus-gaap:Revenues
Revenue12 months2018-11-01 to 2019-10-31$2.06bnus-gaap:RevenueFromContractWithCustomerExcludingAssessedTax
Cost of revenue12 months2018-11-01 to 2019-10-31$1.24bnus-gaap:CostOfRevenue
Gross profit3 months2019-08-01 to 2019-10-31$209.4mus-gaap:GrossProfit
Research and development12 months2018-11-01 to 2019-10-31$66.6mus-gaap:ResearchAndDevelopmentExpense
Selling, general and administrative12 months2018-11-01 to 2019-10-31$356.7mus-gaap:SellingGeneralAndAdministrativeExpense
Operating income12 months2018-11-01 to 2019-10-31$457.1mus-gaap:OperatingIncomeLoss
Income tax12 months2018-11-01 to 2019-10-31$78.1mus-gaap:IncomeTaxExpenseBenefit
Net income3 months2019-08-01 to 2019-10-31$85.7mus-gaap:NetIncomeLoss
Net income12 months2018-11-01 to 2019-10-31$327.9mus-gaap:NetIncomeLoss
Diluted EPS3 months2019-08-01 to 2019-10-31$0.62us-gaap:EarningsPerShareDiluted
Diluted EPS12 months2018-11-01 to 2019-10-31$2.39us-gaap:EarningsPerShareDiluted
Basic EPS3 months2019-08-01 to 2019-10-31$0.64us-gaap:EarningsPerShareBasic
Basic EPS12 months2018-11-01 to 2019-10-31$2.45us-gaap:EarningsPerShareBasic
Diluted shares (weighted)12 months2018-11-01 to 2019-10-31137,350,000 sharesus-gaap:WeightedAverageNumberOfDilutedSharesOutstanding
Operating cash flow12 months2018-11-01 to 2019-10-31$437.4mus-gaap:NetCashProvidedByUsedInOperatingActivities
Capital expenditure12 months2018-11-01 to 2019-10-31$28.9mus-gaap:PaymentsToAcquirePropertyPlantAndEquipment
Dividends paid12 months2018-11-01 to 2019-10-31$18.7mus-gaap:PaymentsOfDividendsCommonStock
Cash and equivalentsAt period end2019-10-31$57.0mus-gaap:CashAndCashEquivalentsAtCarryingValue
Current assetsAt period end2019-10-31$813.7mus-gaap:AssetsCurrent
Total assetsAt period end2019-10-31$2.97bnus-gaap:Assets
Current liabilitiesAt period end2019-10-31$289.1mus-gaap:LiabilitiesCurrent
Total liabilitiesAt period end2019-10-31$1.09bnus-gaap:Liabilities
Shareholders' equityAt period end2019-10-31$1.67bnus-gaap:StockholdersEquity

Source: SEC EDGAR, the filing index for accession 0000046619-19-000095. Last ingested by Listed: Oct 29, 2026, 04:34 ET. Listed shows no prices and gives no investment advice.