Listed

Data I/O Corp: Form 10-Q for the period ended Jun 30, 2014

Filed with the SEC on Aug 13, 2014 and accepted by EDGAR at Aug 13, 2014, 15:26 ET.

Share

Management's discussion and analysis

As filed, 27,299 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

General

Forward-Looking Statements

This Quarterly Report on Form 10-Q includes forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. This Act provides a “safe harbor” for forward-looking statements to encourage companies to provide prospective information about themselves as long as they identify these statements as forward-looking and provide meaningful cautionary statements identifying important factors that could cause actual results to differ from the projected results. All statements other than statements of historical fact made in this Quarterly Report on Form 10-Q are forward-looking. In particular, statements herein regarding industry prospects or trends; expected revenues; expected level of expense; future results of operations; reversals of tax valuation allowances; restructuring implications; breakeven point, or financial position; changes in gross margin; economic conditions and capital spending outlook; market acceptance of our newly introduced or upgraded products; development, introduction and shipment of new products; sales channels and any other guidance on future periods are forward-looking statements. Forward-looking statements reflect management’s current expectations and are inherently uncertain. Although we believe that the expectations reflected in these forward-looking statements are reasonable, we cannot guarantee future results, levels of activity, performance, achievements, or other future events. Moreover, neither we nor anyone else assumes responsibility for the accuracy and completeness of these forward-looking statements. We are under no duty to update any of these forward-looking statements after the date of this report. The reader should not place undue reliance on these forward-looking statements. The discussions above and in the section in Item 1A., Risk Factors “Cautionary Factors That May Affect Future Results” in our Annual report on Form 10-K for the year ended December 31, 2013 describe some, but not all, of the factors that could cause these differences.

OVERVIEW

We have renewed our focus on managing the core programming business to return to profitability, while developing and enhancing products to drive future revenue and earnings growth. Part of the strategy is to gain market share and to expand addressable markets. Our challenge continues to be operating in a cyclical and rapidly evolving industry environment. Starting in December 2013 and continuing through the second quarter, we saw strong orders of our new PSV7000 which led our sales growth. This trend has continued during the first part of the third quarter. Looking forward, our backlog and deferred revenue should position us well for sequential growth in sales in the second half of 2014. We are continuing our efforts to balance business geography shifts, increasing costs and strategic investments in our business with the level of demand and mix of business we expect.

We are focusing our research and development efforts in our strategic growth markets, namely new programming technology, automated programming systems for the manufacturing environment and software. We continue to focus on extending the capabilities and support for our product lines and supporting the latest semiconductor devices, including NAND Flash, e-MMC, and microcontrollers on our newer products. During 2014, we have added media and handling options and software features for our new PSV7000, Data I/O’s most advanced programming system introduced in the fall of 2013, which can cut the cost of programming by up to 50% and represents new capabilities to handle and program small parts. We announced in July 2014 our new PSV3000 automated programming system with a cost effective entry point which was developed for the Asian market and is now available.

Our customer focus has been on strategic high volume manufacturers in key market segments like automotive electronics, wireless and consumer electronics, industrial controls and programming centers.

BUSINESS RESTRUCTURING PROGRESS

As a result of the business downturn we experienced in late 2011, 2012, and continuing in 2013, as well as the uncertain business outlook at those times, we took additional restructuring actions in the second quarter of 2013 and fourth quarter of 2013 to reduce quarterly operating expenses and production costs.

During the second and fourth quarters of 2013, we took restructuring actions to reduce our excess office space and eliminate certain job positions. These actions resulted in restructuring costs of $642,000 for the second quarter and $541,000 in the fourth quarter of 2013. A true up of estimates resulted in a $13,000 charge during the first quarter of 2014. The positions eliminated allow us to have the flexibility to add other critical positions or change fixed to variable costs through outsourcing. These actions have been fully implemented. At June 30, 2014 the remaining portion of the reserve expected to be paid over the next twelve months is $273,000 and the long term portion is $98,000 and relates to the lease abandonment payments that are expected to be completely paid by July 2016.

cRITICAL aCCOUNTING pOLICY jUDGMENTS AND eSTIMATES

The preparation of financial statements in accordance with accounting principles generally accepted in the United States of America requires that we make estimates and judgments, which affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosures of contingent assets and liabilities. On an on-going basis, we evaluate our estimates, including those related to revenue recognition, estimating the percentage-of-completion on fixed-price professional engineering service contracts, sales returns, bad debts, inventories, investments, intangible assets, income taxes, warranty obligations, restructuring charges, contingencies such as litigation, and contract terms that have multiple elements and other complexities typical in the capital equipment industry. We base our estimates on historical experience and other assumptions that we believe are reasonable under the circumstances. Actual results may differ from these estimates under different assumptions or conditions.

We believe the following critical accounting policies affect the more significant judgments and estimates used in the preparation of our financial statements:

Revenue Recognition: We recognize revenue at the time the product is shipped. We have determined that our programming equipment has reached a point of maturity and stability such that product acceptance can be assured by testing at the factory prior to shipment and that the installation meets the criteria to be considered a separate element. These systems are standard products with published product specifications and are configurable with standard options. The evidence that these systems could be deemed as accepted was based upon having standardized factory production of the units, results from batteries of tests of product performance to our published specifications, quality inspections and installation standardization, as well as past product operation validation with the customer and the history provided by our installed base of products upon which the current versions were based.

The revenue related to products requiring installation that is perfunctory is recognized at the time of shipment. Installation that is considered perfunctory includes any installation that can be performed by other parties, such as distributors, other vendors, or in most cases the customers themselves. This takes into account the complexity, skill and training needed as well as customer expectations regarding installation.

We enter into multiple deliverables arrangements that arise during the sale of a system that includes an installation component, a service and support component and a software maintenance component. We allocate the value of each element based on relative selling prices. Relative selling price is based on the selling price of the standalone system. For the installation and service and support components, we use what we charge to distributors who perform these components. For software maintenance components, we use what we charge for annual software maintenance renewals after the initial year the system is sold. Revenue is recognized on the system sale based on shipping terms, installation revenue is recognized after the installation is performed, and hardware service and support and software maintenance revenue is recognized ratably over the term of the agreement, typically one year.

When we sell software separately, we recognize software revenue upon shipment provided that only inconsequential obligations remain on our part and substantive acceptance conditions, if any, have been met.

We recognize revenue when persuasive evidence of an arrangement exists, shipment has occurred, the price is fixed or determinable, the buyer has paid or is obligated to pay, collectability is reasonably assured, substantive acceptance conditions, if any, have been met, the obligation is not contingent on resale of the product, the buyer’s obligation would not be changed in the event of theft, physical destruction or damage to the product, the buyer acquiring the product for resale has economic substance apart from us and we do not have significant obligations for future performance to directly bring about the resale of the product by the buyer. We establish a reserve for sales returns based on historical trends in product returns and estimates for new items.

We transfer certain products out of service from their internal use and make them available for sale. The products transferred are our standard products in one of the following areas: service loaners, rental or test units; engineering test units; or sales demonstration equipment. Once transferred, the equipment is sold by our regular sales channels as used equipment inventory. These product units often involve refurbishing and an equipment warranty, and are conducted as sales in our normal and ordinary course of business. The transfer amount is the product unit’s net book value and the sale transaction is accounted for as revenue and cost of goods sold.

Allowance for Doubtful Accounts: We base the allowance for doubtful accounts receivable on our assessment of the collectability of specific customer accounts and the aging of accounts receivable. If there is deterioration of a major customer’s credit worthiness or actual defaults are higher than historical experience, our estimates of the recoverability of amounts due to us could be adversely affected.

Inventory: Inventories are stated at the lower of cost or market. Adjustments are made to standard cost, which approximates actual cost on a first-in, first-out basis. We estimate reductions to inventory for obsolete, slow-moving, excess and non-salable inventory by reviewing current transactions and forecasted product demand. We evaluate our inventories on an item by item basis and record inventory adjustments accordingly. If there is a significant decrease in demand for our products, uncertainty during product line transitions, or a higher risk of inventory obsolescence because of rapidly changing technology and customer requirements, we may be required to increase our inventory adjustments and our gross margin could be adversely affected.

Warranty Accruals: We accrue for warranty costs based on the expected material and labor costs to fulfill our warranty obligations. If we experience an increase in warranty claims, which are higher than our historical experience, our gross margin could be adversely affected.

Tax Valuation Allowances: Given the uncertainty created by our loss history, as well as the current uncertain economic outlook for our industry and capital spending, we expect to continue to limit the recognition of net deferred tax assets and accounting for uncertain tax positions and maintain the tax valuation allowances. At the current time, we expect, therefore, that reversals of the tax valuation allowance will take place only as we are able to take advantage of the underlying tax loss or other attributes in carry forward. The transfer pricing and expense or cost sharing arrangements are complex areas where judgments, such as the determination of arms-length arrangements, can be subject to challenges by different tax jurisdictions.

Share-based Compensation: We account for share-based awards made to our employees and directors, including employee stock option awards and restricted stock unit awards, using the estimated grant date fair value method of accounting. For options, we estimate the fair value using the Black-Scholes valuation model, which requires the input of highly subjective assumptions, including the option’s expected life and the price volatility of the underlying stock. The expected stock price volatility assumption was determined using the historical volatility of our common stock. Changes in the subjective assumptions required in the valuation model may significantly affect the estimated value of the awards, the related stock-based compensation expense and, consequently, our results of operations.

Results of Operations

Net Sales

(in thousands)

Net sales by product line Three Months Ended Jun. 30, 2014 Change Jun. 30, 2013 Six Months Ended Jun. 30, 2014 Change Jun. 30, 2013
Automated programming systems $3,834 8.2% $3,543 $7,027 8.4% $6,484
Non-automated programming systems 1,765 2.1% 1,728 3,391 (4.3%) 3,545
Total programming systems $5,599 6.2% $5,271 $10,418 3.9% $10,029
Three Months Ended Six Months Ended
Net sales by location Jun. 30, 2014 Change Jun. 30, 2013 Jun. 30, 2014 Change Jun. 30, 2013
(in thousands)
United States $603 20.4% $501 $1,163 40.0% $831
% of total 10.8% 9.5% 11.2% 8.3%
International $4,996 4.7% $4,770 $9,255 0.6% $9,198
% of total 89.2% 90.5% 88.8% 91.7%

15

Net sales in the second quarter of 2014 were $5.6 million, up 6% compared with $5.3 million in the second quarter of 2013 and sequentially up 16% compared with $4.8 million in the first quarter of 2013. On a regional basis, net sales increased 155% in Europe, while declining, in part due to systems in deferred revenue and backlog, in Asia and the Americas compared to the second quarter of 2013. Sequentially, net sales in the second quarter compared to the first quarter of 2014 were up 29% in Europe, 19% in Asia, and flat in the Americas. International sales were 89% of total sales for the second quarter of 2014 compared to 91% for the second quarter of 2013. A sales breakdown by type for the second quarter of 2014 was 61% equipment, 27% adapters and 12% software and maintenance.

Orders for the second quarter of 2014 were $6.3 million, down 7%, compared with $6.7 million in the second quarter of 2013, and sequentially up 8.5% compared to the first quarter of 2014. In the second quarter of 2013 we had the large consumer product order for systems in Asia. The difference in sales versus order amounts and percentages is due to changes in backlog and deferred revenue. We ended the quarter with a backlog of $2.7 million, compared to $2.4 million at June 30, 2013 and $2.6 million at March 31, 2014. We saw an increase of approximately 20% in adapter orders in the second quarter of 2014 compared to the same quarter in 2013, which we believe reflects a higher equipment utilization by our installed base.

For the six months ending June 30, 2014, compared to the same period in 2013, the sales increase was primarily due to incremental sales of our new PSV7000 automated programming system, as well as increased sales of PS388 systems and adapters. During the second quarter of 2014, we sold to a broader base of customers and in particular, we sold PSV7000 systems to many new automated customers and previously inactive customers who had not purchased equipment in five years. Sales were especially strong in the automotive space. Looking forward, our backlog and deferred revenue should position us well for sequential growth in sales in the second half of 2014.

Gross Margin

(in thousands)

Three Months Ended Jun. 30, 2014 Change Jun. 30, 2013 Six Months Ended Jun. 30, 2014 Change Jun. 30, 2013
Gross margin $3,022 2.8% $2,939 $5,517 0.7% $5,480
Percentage of net sales 54.0% 55.8% 53.0% 54.6%

Gross margin as a percentage of sales in the second quarter of 2014 was 54.0%, compared with 55.8% in the second quarter of 2013. The gross margin decrease as a percentage of sales for the second quarter was primarily due to a less favorable product mix and unfavorable variances.

For the first six months of 2014 compared to the same period in 2013, the decrease in gross margin was due to the same general factors discussed above for the second quarter.

Research and Development

(in thousands)

Three Months Ended Jun. 30, 2014 Change Jun. 30, 2013 Six Months Ended Jun. 30, 2014 Change Jun. 30, 2013
Research and development $1,173 5.0% $1,117 $2,323 0.1% $2,321
Percentage of net sales 21.0% 21.2% 22.3% 23.1%

16

Research and development (“R&D”) increased $56,000 in the second quarter of 2014 compared to the same period in 2013, primarily due to personnel additions and higher incentive compensation.

For the first six months of 2014 compared to the same period in 2013, the increase in R&D expense was primarily related to higher incentive compensation and recruiting costs, offset in part by savings from 2013 restructuring actions, cost controls and lower R&D materials.

Selling, General and Administrative

(in thousands)

Selling, general & Three Months Ended Jun. 30, 2014 Change Jun. 30, 2013 Six Months Ended Jun. 30, 2014 Change Jun. 30, 2013
administrative $1,456 (18.4%) $1,785 $3,144 (12.5%) $3,592
Percentage of net sales 26.0% 33.9% 30.2% 35.8%

Selling, General and Administrative expenses decreased $329,000 in the second quarter of 2014 compared to the same period in 2013, primarily related to savings from personnel reductions due to restructuring actions and cost controls, lower commissions, consulting & depreciation offset in part by higher incentive compensation.

For the first six months of 2014 compared to the same period in 2013, the decrease in SG&A expense was due to the same general factors discussed above for the second quarter.

Interest

(in thousands)

Three Months Ended Jun. 30, 2014 Change Jun. 30, 2013 Six Months Ended Jun. 30, 2014 Change Jun. 30, 2013
Interest income $53 (5.4%) $56 $72 (2.7%) $74

Interest income decreased slightly in the second quarter of 2014 compared to the same period in 2013, primarily due to lower invested cash balances.

For the first six months of 2014 compared to the same period in 2013, the decrease in interest income was due to the same general factors discussed above for the second quarter.

Income Taxes

(in thousands)

Three Months Ended Jun. 30, 2014 Change Jun. 30, 2013 Six Months Ended Jun. 30, 2014 Change Jun. 30, 2013
Income tax (expense) benefit ($7) (65.0%) ($20) ($32) 28.0% ($25)

Income tax expense decreased $13,000 in the second quarter of 2014 compared to the same period in 2013, with both period’s expense resulting primarily from foreign income taxes on foreign subsidiary income.

For the first six months of 2014 compared to the same period in 2013, the increase in income tax expense was due to the same general factors discussed above for the second quarter.

The effective tax rate differed from the statutory tax rate primarily due to the effect of valuation allowances, as well as foreign taxes. We have a valuation allowance of $12.2 million as of June 30, 2014. Our deferred tax assets and valuation allowance have been reduced by approximately $192,000 and $132,000 associated with the requirements of accounting for uncertain tax positions as of June 30, 2014 and 2013, respectively. Given the uncertainty created by our past loss history and the cyclical nature of the industry in which we operate, we expect to continue to limit the recognition of net deferred tax assets and maintain the tax valuation allowances.

Financial Condition

Liquidity and Capital Resources

(in thousands)

Jun. 30, 2014 Change Dec. 31, 2013
Working capital $12,015 ($229) $12,244

During the second quarter of 2014, cash declined $556,000 primarily attributed to the increase in accounts receivable resulting from the increase of systems in deferred revenue and late in the quarter shipments offset in part by the net profit for the quarter.

Although we have no significant external capital expenditure plans currently, we expect that we will continue to make capital expenditures to support our business. We plan to increase our internally developed sales demonstration and R&D test equipment as we develop and release new products. Capital expenditures are expected to be funded by existing and internally generated funds or lease financing.

As a result of our significant product development, customer support, selling and marketing efforts, we have required substantial working capital to fund our operations. Over the last few years and again during 2013, we restructured our operations to lower our costs and operating expenditures in some geographic regions, while investing in other regions; creating headroom to hire critical product development resources; and to lower the level of revenue required for our net income breakeven point; as well as offsetting in part, costs rising over time; to preserve our cash position and to focus on profitable operations. See “Business Restructuring Progress” discussion above for future expected restructuring related payments.

We believe that we have sufficient working capital available under our operating plan to fund our operations and capital requirements through at least the next one-year period. Approximately $7.0 million of our cash is located in foreign subsidiary accounts at June 30, 2014. Although we have no current repatriation plans, there may be tax and other impediments to repatriating the cash to the United States. Our working capital may be used to fund share repurchases and growth initiatives including acquisitions, which could reduce our liquidity. Any substantial inability to achieve our current business plan could have a material adverse impact on our financial position, liquidity, or results of operations and may require us to reduce expenditures and/or seek additional financing.

OFF-Balance sheet arrangements

Except as noted in the accompanying consolidated financial statements in Note 6, “Operating Lease Commitments” and Note 7, “Other Commitments”, we have no off-balance sheet arrangements.

Non-Generally accepted accounting principles (GAAP) FINANCIAL MeasureS

Earnings Before Interest, Taxes, Depreciation and Amortization (“EBITDA”) were earnings of $562,000 in the second quarter of 2014 compared to an EBITDA loss of $498,000 in the second quarter of 2013. Equity compensation expense (a non-cash item) in the second quarter of 2014 and 2013 was $125,000 and $136,000, respectively. Adjusted EBITDA excluding equity compensation were earnings of $687,000 in the second quarter of 2014, compared to a loss of $362,000 in the second quarter of 2013.

Non-GAAP financial measures, such as EBITDA and adjusted EBITDA excluding equity compensation, should not be considered a substitute for, or superior to, measures of financial performance prepared in accordance with GAAP. We believe that these non-GAAP financial measures provide meaningful supplemental information regarding the Company’s results and facilitate the comparison of results. A reconciliation of net income (loss) to EBITDA and adjusted EBITDA excluding equity compensation follows:

Non-Generally accepted accounting principles (GAAP) FINANCIAL Measure RECONCILIATION

(in thousands)

Three Months Ended Jun. 30, 2014 Jun. 30, 2013 Six Months Ended Jun. 30, 2014 Jun. 30, 2013
Net Income (loss) $447 ($624) $104 ($1,083)
Interest (income) expense (53) (56) (72) (74)
Taxes 7 20 32 25
Depreciation and amortization 161 162 320 343
EBITDA earnings (loss) $562 ($498) $384 ($789)
Equity Compensation 125 136 211 206
Adjusted EBITDA earnings (loss) excluding equity compensation $687 ($362) $595 ($583)

RECENT ACCOUNTING ANNOUNCEMENTS

In May 2014, the FASB issued ASU 2014-09, “Revenue from Contracts with Customers,” (ASU 2014-09). The standard provides companies with a single model for accounting for revenue arising from contracts with customers and supersedes current revenue recognition guidance, including industry-specific revenue guidance. The core principle of the model is to recognize revenue when control of the goods or services transfers to the customer, as opposed to recognizing revenue when the risks and rewards transfer to the customer under the existing revenue guidance. ASU 2014-09 is effective for annual reporting periods beginning after December 15, 2016. Early adoption is not permitted. The guidance permits companies to either apply the requirements retrospectively to all prior periods presented, or apply the requirements in the year of adoption, through a cumulative adjustment. The Company is in the process of evaluating the impact of adoption on its consolidated financial statements.

In April 2014, the FASB issued ASU 2014-08, “Presentation of Financial Statements and Property, Plant, and Equipment,” (ASU 2014-08). This ASU changes the threshold for reporting discontinued operations and adds new disclosures. The new guidance defines a discontinued operation as a disposal of a component or group of components that is disposed of or is classified as held for sale and “represents a strategic shift that has (or will have) a major effect on our operations and financial results.” For disposals of individually significant components that do not qualify as discontinued operations, we must disclose pre-tax earnings of the disposed component. This guidance is effective for us prospectively for all disposals (or classifications as held for sale) of components of an entity that occur within annual periods beginning on or after December 15, 2014, and interim periods within those years. Early adoption is permitted, but only for disposals (or classifications as held for sale) that have not been reported in financial statements previously issued or available for issuance. We do not expect the adoption of this guidance to have a material impact on our consolidated financial statements.

Controls and procedures

As filed, 1,414 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Evaluation of disclosure controls and procedures

Under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, we evaluated the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rule 13a-15(e) and Rule 15d-15(e) under the Exchange Act) as of the end of the period covered by this report (the “Evaluation Date”). Based upon that evaluation, the Chief Executive Officer and Chief Financial Officer concluded that, as of the Evaluation Date, our disclosure controls and procedures were effective at the reasonable level of assurance. Disclosure Controls are controls and procedures designed to reasonably assure that information required to be disclosed in our reports filed under the Exchange Act is recorded, processed, summarized, and reported within the time periods specified in the SEC’s rules and forms. Disclosure Controls are also designed to reasonably assure that such information is accumulated and communicated to our management, including the CEO and CFO, as appropriate to allow timely decisions regarding required disclosure.

Changes in internal controls

There were no changes made in our internal controls during the period covered by this report that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

Risk factors

As filed, 684 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

In addition to the other information set forth in this report, you should carefully consider the factors discussed in Part I, “Item 1A. Risk Factors” in our Annual Report on Form 10-K for the year ended December 31, 2013, which could materially affect our business, financial condition or future results. The risks described in our Annual Report on Form 10-K are not the only risks facing our Company. Additional risks and uncertainties not currently known to us or that we currently deem to be immaterial also may materially adversely affect our business, financial condition and/or operating results. There are no material changes to the Risk Factors described in our Annual Report.

Figures reported in this filing

Standardized line items from the XBRL in this filing, for the period ended 2014-06-30. Comparative periods it repeats are left out.

Figures reported in this filing
Line itemPeriodValueXBRL concept
Revenue3 months2014-04-01 to 2014-06-30$5.6mus-gaap:SalesRevenueGoodsNet
Revenue6 months2014-01-01 to 2014-06-30$10.4mus-gaap:SalesRevenueGoodsNet
Cost of revenue3 months2014-04-01 to 2014-06-30$2.6mus-gaap:CostOfGoodsAndServicesSold
Cost of revenue6 months2014-01-01 to 2014-06-30$4.9mus-gaap:CostOfGoodsAndServicesSold
Gross profit3 months2014-04-01 to 2014-06-30$3.0mus-gaap:GrossProfit
Gross profit6 months2014-01-01 to 2014-06-30$5.5mus-gaap:GrossProfit
Research and development3 months2014-04-01 to 2014-06-30$1.2mus-gaap:ResearchAndDevelopmentExpense
Research and development6 months2014-01-01 to 2014-06-30$2.3mus-gaap:ResearchAndDevelopmentExpense
Selling, general and administrative3 months2014-04-01 to 2014-06-30$1.5mus-gaap:SellingGeneralAndAdministrativeExpense
Selling, general and administrative6 months2014-01-01 to 2014-06-30$3.1mus-gaap:SellingGeneralAndAdministrativeExpense
Operating income3 months2014-04-01 to 2014-06-30$393.0kus-gaap:OperatingIncomeLoss
Operating income6 months2014-01-01 to 2014-06-30$37.0kus-gaap:OperatingIncomeLoss
Income tax3 months2014-04-01 to 2014-06-30$7.0kus-gaap:IncomeTaxExpenseBenefit
Income tax6 months2014-01-01 to 2014-06-30$32.0kus-gaap:IncomeTaxExpenseBenefit
Net income3 months2014-04-01 to 2014-06-30$447.0kus-gaap:NetIncomeLoss
Net income6 months2014-01-01 to 2014-06-30$104.0kus-gaap:NetIncomeLoss
Diluted EPS3 months2014-04-01 to 2014-06-30$0.06us-gaap:EarningsPerShareDiluted
Diluted EPS6 months2014-01-01 to 2014-06-30$0.01us-gaap:EarningsPerShareDiluted
Basic EPS3 months2014-04-01 to 2014-06-30$0.06us-gaap:EarningsPerShareBasic
Basic EPS6 months2014-01-01 to 2014-06-30$0.01us-gaap:EarningsPerShareBasic
Diluted shares (weighted)3 months2014-04-01 to 2014-06-307,899 sharesus-gaap:WeightedAverageNumberOfDilutedSharesOutstanding
Diluted shares (weighted)6 months2014-01-01 to 2014-06-307,892 sharesus-gaap:WeightedAverageNumberOfDilutedSharesOutstanding
Operating cash flow6 months2014-01-01 to 2014-06-30−$1.3mus-gaap:NetCashProvidedByUsedInOperatingActivities
Capital expenditure6 months2014-01-01 to 2014-06-30−$707.0kus-gaap:PaymentsToAcquirePropertyPlantAndEquipment
Share repurchases6 months2014-01-01 to 2014-06-30$0us-gaap:PaymentsForRepurchaseOfCommonStock
Cash and equivalentsAt period end2014-06-30$8.2mus-gaap:CashAndCashEquivalentsAtCarryingValue
Current assetsAt period end2014-06-30$17.7mus-gaap:AssetsCurrent
Total assetsAt period end2014-06-30$18.9mus-gaap:Assets
Current liabilitiesAt period end2014-06-30$5.7mus-gaap:LiabilitiesCurrent
Shareholders' equityAt period end2014-06-30$13.0mus-gaap:StockholdersEquity

Source: SEC EDGAR, the filing index for accession 0000351998-14-000028. Last ingested by Listed: Nov 14, 2026, 16:08 ET. Listed shows no prices and gives no investment advice.