Listed

Toro Co: Form 10-K for the period ended Oct 31, 2019

Filed with the SEC on Dec 20, 2019 and accepted by EDGAR at Dec 20, 2019, 14:51 ET.

Share

Business

As filed, 66,695 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Introduction

The Toro Company was incorporated in Minnesota in 1935 as a successor to a business founded in 1914 and reincorporated in Delaware in 1983. Unless the context indicates otherwise, the terms "company," "Toro," "we," "our," or "us" refer to The Toro Company and its consolidated subsidiaries. Our executive offices are located at 8111 Lyndale Avenue South, Bloomington, Minnesota, 55420-1196, and our telephone number is (952)-888-8801. Our website for corporate and investor information is www.thetorocompany.com (http://www.thetorocompany.com), which also contains links to our branded product sites. The information contained on our websites or connected to our websites is not incorporated by reference into this Annual Report on Form 10-K (this "report") and should not be considered part of this report.

We design, manufacture, and market professional turf maintenance equipment and services, turf irrigation systems, landscaping equipment and lighting products, snow and ice management products, agricultural irrigation systems ("ag-irrigation"), rental, specialty and underground construction equipment, and residential yard and snow thrower products. We produced our first mower for golf course use in 1919 when we mounted five reel mowers on a Toro tractor, and we introduced our first lawn mower for residential use in 1938. We have continued to enhance our product lines over the more than 100 years we have been in business. We classify our operations into two reportable business segments: Professional and Residential. Our remaining activities are presented as "Other" due to their insignificance. These Other activities consist of earnings (loss) from our wholly-owned domestic distribution companies, corporate activities, and the elimination of intersegment revenues and expenses. Net sales of our reportable segments and Other activities accounted for the following percentages of our consolidated net sales for fiscal 2019: Professional, 77.8 percent; Residential, 21.1 percent; and Other, 1.1 percent.

Our products are advertised and sold worldwide through a network of distributors, dealers, mass retailers, hardware retailers, home centers, as well as online (direct to end-users) under the primary trademarks of Toro®, eXmark®, BOSS®, Ditch Witch®, American Augers®, Subsite®, HammerHead®, Trencor®, Radius®, Irritrol®, Unique Lighting Systems®, Rain Master®, Pope®, PERROT®, Hayter®, and Lawn-Boy®, most of which are registered in the United States ("U.S.") and/or in the primary countries outside the U.S. where we market our products branded under such trademarks. This report also contains trademarks, trade names, and service marks that are owned by other persons or entities, such as The Home Depot, Inc. ("The Home Depot").

We emphasize quality and innovation in our products, customer service, manufacturing, and marketing. We strive to provide well-built, dependable products supported by an extensive service network. We have committed funding for research, development, and engineering in order to improve and enhance

existing products and develop new products. Through these efforts, we seek to be responsive to trends that may affect our target markets now and in the future. A significant portion of our net sales has historically been, and we expect will continue to be, attributable to new and enhanced products. We define new products as those introduced in the current and previous two fiscal years. We plan to continue to pursue targeted acquisitions using a disciplined approach that adds value while complementing our existing brands and product portfolio.

Our purpose is to help our customers enrich the beauty, productivity, and sustainability of the land. Our vision is to be the most trusted leader in solutions for the outdoor environment. Every day. Everywhere. Our mission is to deliver superior innovation and to deliver superior customer care.

Acquisition of The Charles Machine Works, Inc.

On April 1, 2019 ("closing date"), pursuant to the Agreement and Plan of Merger dated February 14, 2019 ("merger agreement"), we completed our acquisition of The Charles Machine Works, Inc. ("CMW"), a privately held Oklahoma corporation. CMW designs, manufactures, and markets a range of professional products to serve the underground construction market, including horizontal directional drills, walk and ride trenchers, compact utility loaders/skid steers, vacuum excavators, asset locators, pipe rehabilitation solutions, and after-market tools. CMW provides innovative product offerings that broadened and strengthened our Professional segment product portfolio and expanded our dealer network, while also providing a complementary geographic manufacturing footprint. The transaction was structured as a merger, pursuant to which a wholly-owned subsidiary of Toro merged with and into CMW, with CMW continuing as the surviving entity and a wholly-owned subsidiary of Toro. As a result of the merger, all of the outstanding equity securities of CMW were canceled and now only represent the right to receive the applicable consideration as described in the merger agreement. At the closing date, we paid preliminary merger consideration of $679.3 million that was subject to customary adjustments based on, among other things, the amount of actual cash, debt, and working capital in the business of CMW at the closing date. During the fourth quarter of fiscal 2019, we finalized such customary adjustments that resulted in an additional $5.7 million of merger consideration being paid and an aggregate merger consideration of $685.0 million ("purchase price"). We funded the purchase price for the acquisition by using a combination of cash proceeds from the issuance of borrowings under our unsecured senior term loan credit agreement and borrowings from our unsecured senior revolving credit facility. For additional information regarding the acquisition and the financing agreements utilized to fund the aggregate merger consideration, refer to Note 2, Business Combinations, and Note 6, Indebtedness, in the Notes to Consolidated Financial Statements included in Part II, Item 8, "Financial Statements and Supplementary Data" of this Annual Report on Form 10-K.

Products by Market

We strive to be a leader in adapting advanced technologies to products and services that provide innovative solutions for turf care maintenance, landscapes, agricultural fields, rental, specialty and underground construction, snow and ice management, and residential demands. The following is a summary of our products, by market, for our Professional segment and our products for our Residential segment:

Professional Segment

We design professional turf; landscape and lighting; rental, specialty and underground construction; snow and ice management; and agricultural products and market them worldwide through a network of distributors and dealers, as well as directly to government customers, rental companies, and large retailers. These channel partners then sell or rent our products primarily to professional users engaged in maintaining turf, such as golf courses, sports fields, municipal properties, as well as residential and commercial landscapes; installing, repairing, and replacing underground pipe and utilities; managing snow and ice needs; irrigating turf and agricultural fields; and creating, renovating, and illuminating landscapes.

Golf Market

Products for the golf market include large reel and rotary riding products for fairway, rough, and trim cutting; riding and walking mowers for putting greens and specialty areas; greens rollers; turf sprayer equipment; utility vehicles; aeration equipment; and bunker maintenance equipment. In late fiscal 2019, we introduced the Toro-branded Greensmaster® Fixed-Head Series walk-behind greens mower, which is designed to provide a consistent quality of cut, reduce operator error, and improve operator comfort and performance through the use of new innovative operator controls, including a telescoping loop handle that can be adjusted to fit the operator. Additionally, in late fiscal 2019, we introduced the Toro-branded Greensmaster eTriFlexTM hybrid riding greens mower. These EnergySmart® models of our legacy TriFlexTM series of greens mowers carry no hydraulic fluid and are designed to be operationally quiet through the use of all-electric components for traction, steering, lift, and cutting. Additionally, the eTriFlex™ 3360 (Engine/Generator model) is designed to provide fuel savings over comparable Triplex mowers, and the 3370 (All-Battery model) eliminates the need for a liquid fuel source altogether.

We manufacture and market underground irrigation systems for the golf market, including sprinkler heads, controllers, turf sensors, and electric, battery-operated, and hydraulic valves. Our golf irrigation product portfolio is centered around the most critical elements of a golf course irrigation system. From our Lynx® central control software platform, to a dual offering of field control system technology including Lynx Smart Module two-wire and satellite, to the innovative INFINITY® sprinkler, Toro-branded golf irrigation products are designed to help customers reduce the cost of operational inputs while delivering exceptional playing conditions. In fiscal 2019, building on the success of INFINITY Smart Access® top-accessibility, we introduced the INFINITY Razor®, an accessory that is designed to save considerable time and labor by allowing

superintendents to incrementally raise sprinkler height levels without the need to excavate and re-level heads. The Razor, like many Toro innovations, was a direct result of Toro's "Voice of the Customer" program. Toro's customers, like golf course superintendents, have come to rely on Toro for productivity solutions designed to improve their turf management process. Our customers around the world also enjoy 24/7 service and support from our award-winning Toro National Support Network.

Landscape Contractor Market

We market products to landscape contractors under the Toro and eXmark brands. Products for the landscape contractor market include zero-turn radius riding mowers, heavy-duty walk behind mowers, mid-size walk behind mowers, stand-on mowers, as well as lawn solution, turf renovation, and tree care equipment. We offer some products with electronic fuel injection engine options, which are designed to provide improved fuel efficiency and lower emissions. In fiscal 2019, Toro introduced a new special edition model in our Titan® HD 2000 Series of commercial zero-turn riding mowers, which features the new MyRIDE® suspended operator platform designed to allow for three inches of suspension travel to isolate bumps and vibrations for the operator, as well as 24-inch drive tires with black cast aluminum wheels and a factory installed LED light kit. In fiscal 2019, eXmark introduced Staris®, a redesigned stand-on mower platform designed to improve productivity, cut quality, and serviceability for landscape contractors by aligning frame size with deck width and lowering the center of gravity of the machine to allow for improved handling and control in operation.

Sports Fields and Grounds Market

Equipment products for the sports fields and grounds market include riding rotary and reel mowers and attachments, aerators, infield grooming equipment, multipurpose vehicles and debris management products, which include versatile debris vacuums, blowers, and sweepers. In addition to equipment products, we also manufacture and market irrigation systems under the Toro and PERROT brands for the sports fields and grounds market, including sprinkler heads, controllers, turf sensors, and electric, battery-operated, and hydraulic valves. These products are sold through distributors and dealers, who then sell to owners and/or managers of sports fields, governmental properties, and residential and commercial landscapes, as well as directly to government customers. Our Outcross® 9060 is a multi-purpose, turf-friendly vehicle that is designed to perform the work of a tractor and super-duty vehicle with multiple attachment options, including the Groundsmaster® 1200 pull-behind rotary, which is designed to deliver the same combination of productivity, durability, and superior cut as our other Groundsmaster equipment, with features such as a 12-foot width of cut and independently articulating decks.

Underground Construction Market

Our acquisition of CMW added a breadth of new products to our underground construction product portfolio. For additional information regarding our acquisition of CMW, refer to Note 2, Business Combinations, in the Notes to Consolidated Financial Statements included in Part II, Item 8, "Financial Statements and Supplementary Data" of this Annual Report on Form 10-K.

CMW is known as "The Underground Authority" with a family of brands sold primarily under the trade names of Ditch Witch, American Augers, Trencor, HammerHead, Subsite, and Radius. CMW designs, manufactures, and sells a range of professional products to serve the underground construction market. Ditch Witch has built a legacy in the underground construction market as a result of innovative product offerings, most notably, the patented All Terrain drilling system included on certain horizontal directional drills. The All Terrain drilling system is designed to deliver more power to the bit than other rock-drilling systems and thereby results in exceptional drilling productivity in the widest range of ground formations. American Augers and Trencor comprise one of the largest categories of horizontal directional drills and trenchers in the underground construction market and are designed to effectively handle the largest underground construction challenges. HammerHead is an innovative portfolio of trenchless solutions for the underground construction market, including rehabilitation, replacement, and installation equipment and consumables, designed to solve underground infrastructure challenges. Subsite manufactures and markets a comprehensive suite of Underground Awareness® products, featuring horizontal directional drilling support equipment, utility locators, utility inspection systems, and equipment machine controls designed to keep underground construction professionals safe and efficient. Radius offers a comprehensive line of drilling tools for underground construction professionals, including drive chucks and sub savers, drill pipe, starter rods and quick connects, bits and blades, rock tools, reamers, and swivels.

In August 2019, we announced a new underground construction business strategy that included a plan to wind down our Toro-branded large horizontal directional drill and riding trencher product categories ("Toro underground wind down"). This action is aligned with our broader integration plan for the CMW businesses and is intended to allow us to maximize efficiencies and cost synergies post-acquisition and enable us to adapt to changing underground construction market conditions regarding our underground product portfolio. While the Toro underground wind down is still ongoing as of October 31, 2019, the transition is expected to be finalized by the end of fiscal 2020. For additional information regarding the Toro underground wind down, refer to Note 7, Management Actions, in the Notes to Consolidated Financial Statements included in Part II, Item 8, "Financial Statements and Supplementary Data" of this Annual Report on Form 10-K.

Rental and Specialty Construction Market

Products for the rental and specialty construction market include Toro and Ditch Witch-branded stand-on compact utility loaders/skid steers; walk-behind trenchers; stump grinders; and turf renovation products. We also have a line of Toro-branded rental products that feature concrete and mortar mixers, material handlers, compaction equipment, and other concrete equipment. Our rental and specialty construction products are mainly sold to rental companies and large retailers who subsequently rent the products to end-users, as well as through dealers, who then sell to end-users that in many cases are the same customers as those in our landscape contractor market. Toro-branded compact utility loaders are the cornerstone products for our Toro-branded rental and specialty construction business, which are designed to improve the efficiency in creation and renovation of landscapes. Our Dingo® TX 1000 compact utility loader provides market leading operating capacity in a lightweight, maneuverable design. We offer over 35 attachments for our compact utility loaders, including trenchers, augers, vibratory plows, and backhoes. In fiscal 2019, we introduced the revolutionary Dingo TXL 2000 Telescoping, which features telescoping arms that are designed to enable the machine to reach over obstacles, dig below grade, and generally extend the operator's working range.

Our acquisition of CMW added a robust portfolio of Ditch Witch-branded mini stand-on skid steer products that are marketed and sold to contractors, municipalities, and other governmental entities through a comprehensive dealer network. Such Ditch Witch-branded mini stand-on skid steer products provide innovative and versatile solutions designed to increase efficiency and performance, as well as reduce manual labor for landscape and construction tasks in which end-users are unable to utilize larger equipment.

Snow and Ice Management Market

Products for the snow and ice management market are marketed mainly in North America under the BOSS brand and include snowplows, salt and sand spreaders, and related parts, as well as accessories for light and medium duty trucks, all-terrain vehicles, utility task vehicles, skid steers, and front-end loaders. These products are mainly sold through distributors and dealers, who then sell to end-users that in many cases are the same customers as those in our landscape contractor and sports fields and grounds markets, such as contractors, municipalities, and other governmental entities. Our BOSS-branded snow and ice management products are designed to provide innovative solutions to contractors, municipalities, and other governmental entities. One example of such innovation is our recently acquired and upgraded stand-on Snowrator®, which is designed to be a maneuverable, multi-tasking, and labor-saving snow removal and de-icing solution through its ability to make quick work of snow and ice covered sidewalks and other tight areas where large equipment is unable to reach and shoveling by hand was previously necessary.

Commercial Irrigation and Lighting Market

Turf irrigation products marketed under the Toro and Irritrol brands include rotors; sprinkler bodies and nozzles; plastic, brass, and hydraulic valves; drip tubing and subsurface irrigation; electric control devices; and wired and wireless rain, freeze, climate, and soil sensors. These products are installed by professional contractors and are designed for use in commercial and residential turf irrigation applications and can be installed into new systems or used to replace or retrofit existing systems. Most of the product lines are designed for professionally installed, underground automatic irrigation. Electric controllers activate valves and sprinklers in a typical irrigation system. Both the Toro and Irritrol brands have received the U.S. Environmental Protection Agency ("EPA") WaterSense award, as well as the EPA WaterSense certification for numerous irrigation controller families and models. In 2019, we continued to strengthen our SMRT Logic™ offering by adding the Rain Dial® to our line-up of compatible connected controllers. Professional contractors are now able to offer their customers various controller options between the Toro Evolution®, the Irritrol KD2 Series, and the Irritrol Rain Dial® Series to deliver irrigation and lighting control with the touch of a button using our SMRTScape App.

We manufacture and market lighting products under the Unique Lighting Systems brand name consisting of a line of high quality, professionally installed lighting fixtures and transformers for commercial and residential landscapes. Our lighting product line is offered through distributors and landscape contractors that also purchase our irrigation products. Our Light Logic™ remote control system provides operators with wireless scene control for landscape lighting and can upgrade existing systems with expanded control. The Light Logic™ Plus system is designed to deliver cloud-based control from any location using a web-enabled computer or device for outdoor landscape features such as lighting, irrigation, and pond or fountain pumps. In fiscal 2019, we expanded on our popular FLEX GOLD™ VIVID SERIES of LED lamps by adding color-changing options to go along with our white adjustable color temperature lamps that allow end-users to dial-in temperatures between 2700 – 6500K.

Agricultural-Irrigation Market

Products for the agricultural-irrigation market include products that are designed around efficient means of water application, including Aqua-Traxx® PBX drip tape, Neptune® flat emitter dripline, Blue Stripe® polyethylene tubing, BlueLine® drip line, and NGE® emitters, all used in agricultural and landscape applications. Population growth combined with limited resources for land and water, as well as water use restrictions, have continued to drive the need for more efficient irrigation solutions for agriculture, including our Aqua-Traxx Flow Control drip tape that is designed to allow growers to achieve water uniformity while retaining flexibility to adjust system flow rates when needed. In addition to these core products, we offer a full complement of design software, control devices, and connection options to complete the system. These products are sold mainly through dealers and distributors who then sell to end-users for use primarily in vegetable fields, fruit and nut

orchards and vineyards. In fiscal 2019, we began implementing a "closed loop system" designed to address environmental sustainability by providing our customers with a mechanism by which they can return the resin that is used in our products from the field so that it can be reused in our manufacturing processes, thus reducing the impact of plastic usage and waste.

Residential Segment

We market our Residential segment products to homeowners through a variety of distribution channels, including outdoor power equipment distributors and dealers, mass retailers, hardware retailers, home centers, as well as online (direct to end-users). We also license our trademark on certain home solutions products as a means of expanding our brand presence.

Walk Power Mower Products

We manufacture and market numerous walk power mower models under our Toro and Lawn-Boy brand names, as well as the Hayter brand in the United Kingdom. Models differ as to cutting width, type of starter mechanism, method of grass clipping discharge, deck type, operational controls, and power sources, and are either self-propelled or operator-propelled push mowers. For the United Kingdom market, we offer a line of rear-roller walk power mowers, a design that provides a striped finish. In fiscal 2019, Toro launched a new line of products with the Flex-Force Power System® featuring 60V lithium-ion technology. This product line includes new Toro 22-inch Recycler® 60V walk power mowers. The mowers start with the push of a button, and the deck is made of steel instead of plastic for added durability. Other features include Toro's Personal Pace® self-propel system that is designed to automatically adjust to the user's walking speed, and SMARTSTOW®, which is designed to allow the mower to be stored upright, reducing the storage footprint by up to 70 percent. All of the products in the 60V Flex-Force Power System line feature Toro's lithium-ion smart batteries, which are designed to be interchangeable among products in the 60V Flex-Force Power System line and reduce emissions and noise.

Riding Products

We manufacture and market riding products under the Toro brand name. Riding products consist of zero-turn radius riding mowers that are designed to save homeowners time by using superior maneuverability to cut around obstacles more quickly and easily than tractor technology. Many models of our riding products are available with a variety of engines, decks, transmissions, and accessories. Our TimeCutter® SS and TimeCutter MX zero-turn radius riding mowers are equipped with our Smart Speed® control system, which is designed to allow the operator to choose different ground speed ranges without changing the blade or engine speed. In fiscal 2019, we introduced two new models in our TimeCutter MX line of residential zero-turn radius riding mowers, the MX5000 and MX5050. Both models have a 50-inch heavy-duty fabricated deck featuring our IronForged® cutting system that tackles challenging cutting conditions and new 18-inch thickly padded premium seats for improved operator comfort. The MX5050 also features our Smart Speed control system, which is designed to allow the operator to choose from three speeds, providing optimal performance when trimming, towing attachments, and mowing.

Snow Thrower Products

We manufacture and market a range of gas-powered single-stage and two-stage snow thrower models, as well as a range of electric and battery-powered single-stage snow thrower models. Our electric snow throwers are designed to be lightweight and ideal for clearing up to twelve inches of snow from decks, steps, sidewalks, and small driveways. Single-stage snow throwers are walk behind units with lightweight four-cycle gasoline engines. Most single-stage snow thrower models include our Power Curve® snow thrower technology, and some feature our Quick Shoot™ control system that is designed to enable operators to quickly change snow-throwing direction. Our pivoting scraper is designed to keep the rotor in constant contact with the pavement. Our two-stage snow throwers are generally designed for relatively large areas of deep and heavy snow. Our two-stage snow throwers include a line of models featuring our patented Anti-Clogging System and Quick Stick® chute control technology. In fiscal 2019, we introduced a refreshed line of Toro Power Clear® gas-powered, single-stage snow throwers as well as the new Flex-Force 60V lithium-ion powered single-stage snow products. These models are designed to efficiently remove snow while reducing clogging with the curved paddles and funneled housing of the Power Curve Technology. The new Flex-Force 60V lithium-ion powered single-stage snow products also feature Toro's lithium-ion smart batteries.

Home Solutions Products

We design and market home solutions products under the Toro and Pope brand names. Our Toro brand name products include yard tools such as electric, gas, and battery grass trimmers; electric and battery hedge trimmers; and electric, gas, and battery blower-vacuums. Toro's new assortment of products with the Flex-Force Power System featuring 60V lithium-ion technology also includes leaf blowers and string trimmers. The new 60V leaf blower is designed to deliver more power than other products in the market in order to efficiently clear large piles of leaves and debris, while the 60V cordless string trimmer features a high-performance brushless motor designed for extended life with low maintenance. Each of these products feature Toro's lithium-ion smart batteries.

In Australia and New Zealand, we design and market garden product offerings, such as underground, hose, and hose-end retail irrigation products under the Pope brand name. These garden watering and irrigation solutions include hoses; reels, carts and hangers; sprinklers; hand sprays and wands; hose end fittings; tap timers; various irrigation tools; and pots and accessories designed to develop and maintain gardens. In fiscal 2019, we launched or refreshed in excess of fifty retail garden products and successfully executed significant packaging cost savings measures. Toro was classified as "advanced" in its most recent audit of sustainable packaging activities undertaken by the Australian Packaging Covenant, a government body established to drive improvements in environmental sustainability relating to packaging. In fiscal 2019, we

introduced new models into the "Auto Wind Hose Reel" product category, designed with a focus on controlled rewind and user safety. Additionally, in fiscal 2019 we introduced new products in the hose end sprinkler category, creating a patented click-and-go system intended to give users a wider choice of sprinkler and base options.

International Operations and Business Segments

We currently manufacture our products in the U.S., Mexico, Australia, the United Kingdom, Italy, Romania, Germany, Poland, and China for sale throughout the world. We maintain sales offices in the U.S., Belgium, the United Kingdom, Australia, Japan, China, Italy, Poland, Germany, Spain, and France. New product development is pursued primarily in the U.S. with the intention of global distribution. Our net sales outside the U.S. were 23.1 percent, 24.6 percent, and 24.4 percent of total consolidated net sales for fiscal 2019, 2018, and 2017, respectively. For additional financial information regarding our international operations and geographical areas, and our reportable business segments, refer to Note 3, Segment Data, in the Notes to Consolidated Financial Statements included in Part II, Item 8, "Financial Statements and Supplementary Data" of this Annual Report on Form 10-K.

As a result of our international operations, we are exposed to foreign currency exchange rate risk arising from transactions in the normal course of business. For additional information regarding our foreign currency exchange rate risk exposure, refer to Part II, Item 7A, "Quantitative and Qualitative Disclosures about Market Risk" of this Annual Report on Form 10-K.

Engineering and Research

We are committed to an ongoing engineering program dedicated to developing innovative new products and improvements in the quality and performance of existing products. However, a focus on innovation also carries certain risks that new technology could be slow to be accepted or not accepted by the marketplace. We attempt to mitigate these risks through our focus on, and commitment to, understanding our customers' needs and requirements. We invest time up front with customers, using "Voice of the Customer" tools, to help us develop innovative products that are intended to meet or exceed customer expectations. We use Design for Manufacturing and Assembly ("DFM/A") tools to ensure early manufacturing involvement in new product designs intended to reduce production costs. DFM/A focuses on reducing the number of parts required to assemble new products, as well as designing products to move more efficiently through the manufacturing process. We strive to make improvements to our new product development system as part of our continuing focus on Lean methods to shorten development time and reduce costs, while also improving quality.

Manufacturing and Production

In addition to most final assembly, we have strategically identified specific core manufacturing competencies for vertical integration, such as injection molding, extrusion, welding, stamping, fabrication, laser cutting, painting, machining, and aluminum die casting, and have chosen outside vendors to provide other services, where applicable. We design component parts in cooperation with our vendors, contract with them for the development of tooling, and subsequently enter into agreements with such vendors to purchase component parts manufactured using the tooling. We also have some agreements with third-party manufacturers to manufacture certain products on our behalf. In addition, our vendors regularly test new technologies to be applied in the design and production of component parts. Manufacturing operations include robotic and computer-automated equipment intended to speed production, reduce costs, and improve the quality, fit, and finish of our products. Operations are also designed to be flexible enough to accommodate product design changes that are necessary to respond to market conditions and changing customer requirements.

In order to utilize our manufacturing facilities and technology more efficiently and effectively, we pursue continuous improvements in our manufacturing processes with the use of Lean methods that are intended to streamline work and eliminate waste. We spend considerable effort to reduce manufacturing costs through Lean methods and process improvement, product and platform design, application of advanced technologies, enhanced environmental management systems, safety improvements, and improved supply-chain management.

Our Professional segment products are manufactured throughout the year. Our Residential segment lawn and garden products are also generally manufactured throughout the year. However, our Residential segment snow thrower products are manufactured in the summer and fall months but may be extended into the winter months, depending upon demand. Our products are tested in conditions and locations similar to those in which they are intended to be used. We use computer-aided design and manufacturing systems to shorten the time between initial concept and final production. DFM/A principles are used throughout the product development process to optimize product quality and reduce cost.

Our production levels and inventory management goals are based on estimates of wholesale and retail demand for our products, taking into account production capacity, labor availability, timing of shipments, and field inventory levels. Our production system utilizes Kanban, supplier pull, and build-to-order methodologies in our manufacturing facilities, as appropriate, for the business units they support in order to better align the production of our products to meet customer demand. We believe this has resulted in improved service levels for our participating suppliers, distributors, dealers, and other channels.

We periodically shut down production at our manufacturing facilities in order to allow for maintenance, rearrangement,

capital equipment installation, seasonality, and as needed, to adjust for market demand and facility renovation projects.

Commodities, Components, Parts, and Accessories

We purchase commodities comprised of raw materials such as steel, aluminum, petroleum and natural gas-based resins, linerboard, and other materials, as well as components, such as engines, transmissions, transaxles, hydraulics, and electric motors, for use in our products. In addition, we are a purchaser of parts and accessories containing various commodities, including steel, aluminum, copper, lead, rubber, and others that are integrated into our end products. Our largest spend for commodities, components, parts, and accessories are generally for steel, engines, hydraulic components, transmissions, resin, aluminum, and electric motors, all of which we purchase from several suppliers around the world. We generally purchase commodities, components, parts, and accessories based upon market prices that are established with suppliers as part of the purchase process and generally attempt to obtain firm pricing from most of our suppliers for volumes consistent with planned production and estimates of wholesale and retail demand for our products. Most of the commodities, components, parts, and accessories utilized in our products are generally commercially available from a number of sources, and are in adequate supply. However, certain items are sourced from single suppliers. In fiscal 2019, similar to fiscal 2018, we experienced work stoppages as a result of supply chain challenges related to the availability or quality of commodities, components, parts, and accessories.

Most of the commodities, components, parts, and accessories used in our manufacturing process and end-products, or to be sold as standalone end-products, are exposed to commodity cost changes, including, for example, as a result of inflation, deflation, changing prices, tariffs, and/or duties. We strategically work to mitigate any unfavorable impact as a result of changes to the cost of commodities, components, parts, and accessories that affect our product lines. Historically, we have mitigated, and we currently expect that we would mitigate, any commodity, components, parts, and accessories cost increases, in part, by collaborating with suppliers, reviewing alternative sourcing options, substituting materials, utilizing Lean methods, engaging in internal cost reduction efforts, utilizing tariff exclusions and duty drawback mechanisms, and increasing prices on some of our products, all as appropriate. Additionally, we enter into fixed-price contracts for future purchases of natural gas in the normal course of operations as a means to manage natural gas price risks. However, to the extent that commodity and component costs increase, as a result of inflation, tariffs, duties, or otherwise, and we do not have firm pricing from our suppliers, or our suppliers are not able to honor such prices, we may experience a decline in our gross margins to the extent we are not able to increase selling prices of our products or obtain manufacturing efficiencies to offset increases in commodity, component, parts, and accessories costs.

In fiscal 2019, the average cost of commodities, components, parts, and accessories purchased, including the impact of inflation and tariff costs, was higher compared to the average cost of commodities, components, parts, and accessories purchased in fiscal 2018. We anticipate the average price of commodities, components, parts, and accessories, including the impact of inflation, deflation, tariff, and/or duty costs, in fiscal 2020 to be slightly lower than the average price paid for commodities, components, parts, and accessories during fiscal 2019.

Service and Warranty

Our products are warranted to ensure customer confidence in design, workmanship, and overall quality. Warranty coverage is generally for specified periods of time and on select products' hours of usage, and generally covers parts, labor, and other expenses for non-maintenance repairs. Warranty coverage generally does not cover operator abuse or improper use. An authorized company distributor or dealer must perform warranty work. Distributors and dealers submit claims for warranty reimbursement and are credited for the cost of repairs, labor, and other expenses as long as the repairs meet our prescribed standards. Warranty expense is accrued at the time of sale based on the estimated number of products under warranty, historical average costs incurred to service warranty claims, the trend in the historical ratio of claims to sales, the historical length of time between the sale and resulting warranty claim, and other minor factors. Special warranty reserves are also accrued for major rework campaigns. Service support outside of the warranty period is provided by authorized distributors and dealers at the customer's expense. We sell extended warranty coverage on select products for a prescribed period after the original warranty period expires.

Product Liability

We have rigorous product safety standards and continually work to improve the safety and reliability of our products. We monitor for accidents and possible claims and establish liability estimates based on internal evaluations of the merits of individual claims. We purchase insurance coverage for catastrophic product liability claims for incidents that exceed our self-insured retention levels.

Patents and Trademarks

We own patents, trademarks, and trade secrets related to our products in the U.S. and certain countries outside the U.S. in which we conduct business. We expect to apply for future patents and trademarks, as appropriate, in connection with the development of innovative new products, services, and enhancements. Although we believe that, in the aggregate, our patents are valuable, and patent protection is beneficial to our business and competitive positioning, our patent protection will not necessarily deter or prevent competitors from attempting to develop similar products. We are not materially dependent on any one or more of our patents; however, certain Toro trademarks that contribute to our identity and the recognition of our products and services, including the Toro® name and logo, are an integral part of our business.

We regularly review certain patents issued by the U.S. Patent and Trademark Office ("USPTO") and international patent offices to help avoid potential liability with respect to others'

patents. Additionally, we periodically review competitors' products to prevent possible infringement of our patents by others. We believe these activities help us minimize our risk of being a defendant in patent infringement litigation. We are currently involved in patent litigation cases where we are asserting our patents against competitors and defending against patent infringement assertions by others. Such cases are at varying stages in the litigation process.

Similarly, we periodically monitor various trademark registers and the market to prevent infringement of and damage to our trademarks by others. From time to time, we are involved in trademark oppositions where we are asserting our trademarks against third-parties who are attempting to establish rights in trademarks that are confusingly similar to ours. We believe these activities help minimize risk of harm to our trademarks, and help maintain distinct products and services that we believe are well regarded in the marketplace.

Seasonality

Shipments of our Residential segment products, which accounted for 21.1 percent of total consolidated net sales in fiscal 2019, are seasonal, with shipments of lawn and garden products occurring primarily between February and June, depending upon seasonal weather conditions and demand for our products. Shipments of snow thrower products occur primarily between July and January, depending upon pre-season demand, in-season snowfalls, and product availability. Opposite seasons in global markets in which we sell our Residential products somewhat moderate this seasonality of our Residential segment product sales.

Seasonality of Professional segment product sales also exists, but is tempered because the selling season in the Southern U.S. and our markets in the Southern hemisphere continue for a longer portion of the year than in Northern regions of the world. Our BOSS snow and ice management business offers a portfolio of counter-seasonal products in our Professional segment with our shipments of snow and ice management equipment occurring primarily between April and December, which can result in variability of shipment volumes depending upon pre-season demand, in-season snowfalls, and product availability. Additionally, CMW has historically been less seasonal than certain of our Professional segment businesses primarily due to its strong presence in the Southern U.S. markets and the inherent nature of the underground construction market being less impacted by seasonal factors.

Overall, our worldwide shipment volumes are historically the highest in our fiscal second quarter and retail demand is generally highest in our fiscal third quarter. Typically, our accounts receivable balances increase between January and April as a result of higher shipment volumes and extended payment terms made available to our customers. Accounts receivable balances typically decrease between May and December when payments are received. Our financing requirements are subject to variations due to seasonal changes in working capital levels, which typically increase in the first half of our fiscal year and decrease in the second half of our fiscal year. Seasonal cash requirements of our business are financed from a combination of cash flows from operations, cash on hand, and borrowings under our revolving credit facility, as applicable.

The following table presents total consolidated net sales and net earnings for each fiscal quarter as a percentage of the total fiscal year:

Fiscal Years Quarter 2019 Net Sales Net Earnings 2018 Net Sales Net Earnings
First 19% 22% 21% 8%
Second1,2 31% 42% 33% 48%
Third1,2 27% 22% 25% 29%
Fourth1 23% 14% 21% 15%

1 Fiscal 2019 net sales and net earnings were impacted by our acquisition of CMW. Refer to Part II, Item 7, "Management's Discussion and Analysis of Financial Condition and Results of Operations," and Note 2, Business Combinations, of the Notes to Consolidated Financial Statements included in Part II, Item 8, "Financial Statements and Supplementary Data" of this Annual Report on Form 10-K for additional information regarding CMW and its impact to our fiscal 2019 Results of Operations.

2 During fiscal 2019, CMW's financial position, results of operations, and cash flows were reported on a calendar month end. Accordingly, April 30, 2019 and July 31, 2019 were the quarterly period end dates closest to our quarterly fiscal periods ended May 3, 2019 and August 2, 2019, respectively. This reporting period difference did not have material impact on our Consolidated Results of Operations during our second and third fiscal quarters. For our fiscal 2019 fourth quarter, the reporting period end for both CMW and Toro was October 31, 2019.

Effects of Weather

From time to time, weather conditions in particular geographic regions or markets may adversely or positively affect sales of some of our products and field inventory levels and result in a negative or positive impact on our future net sales and results of operations.

Working Capital

Our businesses are seasonally working capital intensive and require funding for purchases of commodities, components, parts, and accessories used in production of end-products and/or sold as standalone end-products; replacement parts inventory; payroll and other administrative costs; capital expenditures; establishment of new facilities; expansion and renovation of existing facilities; as well as for financing receivables from customers that are not financed with Red Iron Acceptance, LLC ("Red Iron"), our joint venture with TCF Inventory Finance, Inc. ("TCFIF"), or with other third-party financial institutions. Our strategy continues to place emphasis on improving asset utilization with a focus on reducing the amount of working capital in the supply chain, adjusting production plans, and maintaining or improving order replenishment and service levels to end-users. We fund our operations through a combination of cash flows from operations, cash on hand, and, as applicable, short-term and/or long-term debt, including borrowings under our revolving credit facility. Cash management is centralized, and

intercompany financing is used, wherever possible, to provide working capital to wholly owned subsidiaries as needed. In addition, our revolving credit facility is available for additional working capital needs, acquisitions, or other investment opportunities, as applicable.

Distribution and Marketing

We market the majority of our products through 68 domestic and 140 international distributors, as well as a large number of equipment dealers, irrigation dealers and distributors, mass retailers, hardware retailers, home centers, and online (direct to end-users) in more than 129 countries worldwide. Our distribution systems are intended to assure quality of sales and market presence, as well as to provide effective after-purchase service and support.

Professional segment products are sold to distributors and dealers primarily for resale to golf courses, sports fields, industrial facilities, contractors, and government customers, and in some markets for resale to dealers. We sell some Professional segment products directly to government customers and municipalities, rental companies, and agricultural irrigation dealers, as well as to end-users in certain international markets. Select irrigation and lighting products are sold to professional irrigation and lighting distributors and dealers, and certain professional-grade retail irrigation products are sold to home centers. Products for the rental and specialty construction and underground construction markets are sold to dealers and rental companies. Landscape contractor turf products are also sold to dealers in certain regions of North America. Snow and ice management products are primarily sold to distributors and dealers for resale to contractors.

Residential segment products, such as walk power mowers, zero-turn radius riding mowers, and snow throwers, are generally sold to home centers, mass retailers, dealers, hardware retailers, as well as online (direct to end-users). In certain markets, these same products are sold to distributors for resale to hardware retailers and dealers. Home solutions products are primarily sold to home centers, mass retailers, and hardware retailers. Internationally, Residential segment products are sold to dealers and mass merchandisers in Australia, Canada, and select countries in Europe. In most other countries, Residential segment products are mainly sold to distributors for resale to dealers and mass retailers.

On November 30, 2018, during the first quarter of fiscal 2019, we completed our acquisition of a Northeastern U.S. distribution company, refer to Note 2, Business Combinations. During fiscal 2017 and 2018, we owned one wholly-owned domestic distribution company. Our primary purpose in owning domestic distributorships is to improve operations and test and deploy new strategies and business practices that could be replicated by our independent distributors, as well as facilitating ownership transfers.

Our current marketing strategy is to maintain distinct brands and brand identification for Toro, eXmark, BOSS, Ditch Witch, American Augers, Trencor, Subsite, HammerHead, Radius, Unique Lighting Systems, Rain Master, Pope, PERROT, Hayter, and Lawn-Boy products.

Across our brands, we market our Professional segment and Residential segment products during the appropriate season through multiple channels, including digital and online media, radio, print, direct mail, email, television, and social media. Most of our advertising and marketing efforts emphasize our brands, products, features, and other valuable trademarks. Advertising is purchased by us, through our agency partners, as well as through cooperative programs with distributors, dealers, and retailers.

Customers and Customer Financing Arrangements

Overall, we believe that in the long-term we are not dependent on any single customer; and during fiscal 2019 and 2018, no customer accounted for 10.0 percent or more of our total consolidated gross sales. Historically, the Residential segment of our business has had significant sales to The Home Depot as a customer, which accounted for approximately 10.0 percent of our total consolidated gross sales in fiscal 2017. While the loss of any substantial customer could have a material adverse short-term impact on our business, we believe that our diverse distribution channels and customer base should reduce the long-term impact of any such loss.

Wholesale Financing

We are party to a joint venture with TCFIF, a subsidiary of TCF National Bank, established as Red Iron. The primary purpose of Red Iron is to provide inventory financing to certain distributors and dealers of certain of our products in the U.S. In addition, TCF Commercial Finance Canada, Inc. ("TCFCFC") provides inventory financing to dealers of certain of our products in Canada. Under these financing arrangements, down payments are not required, and depending on the finance program for each product line, finance charges are paid by us, shared between us and the distributor and/or the dealer, or paid by the distributor or dealer. Red Iron retains a security interest in the distributors' and dealers' financed inventories and such inventories are monitored regularly. Financing terms to the distributors and dealers require payment as the equipment, which secures the indebtedness, is sold to customers or when payment otherwise becomes due under the agreements between these financing entities and the distributors and dealers, whichever occurs first. Rates are generally indexed to LIBOR plus a fixed percentage that differs based on whether the financing is for a distributor or dealer. Rates may also vary based on the product that is financed. We also have agreements with other third-party financial institutions to provide floor plan financing to certain dealers and for certain products not financed through Red Iron, which include agreements with third-party financial institutions as a result of our acquisition of CMW.

Additionally, we continue to provide financing in the form of open account terms directly to home centers and mass retailers, general line irrigation dealers, certain international distributors and dealers, ag-irrigation dealers and distributors, government customers, and rental companies.

End-User Financing

We have agreements with third-party financing companies to provide lease-financing options to golf course, sports field and grounds equipment and underground construction equipment customers in the U.S, Canada, Australia, and select countries in Europe. The purpose of these agreements is to provide end-users of our products alternative financing options when purchasing our products.

Backlog of Orders

Our backlog of orders is dependent upon when customers place orders and is not necessarily an indicator of our expected results for our fiscal 2020 net sales. The approximate backlog of orders as of October 31, 2019 and 2018 was $112.5 million and $77.8 million, respectively, an increase of 44.6 percent. Backlog orders were higher at the end of fiscal 2019 compared to the end of fiscal 2018 as a result of our acquisition of CMW, partially offset by reduced backlog in certain of our Professional segment businesses due to higher field inventory levels for our Professional segment zero-turn riding mowers due to soft retail demand. For additional information regarding the acquisition of CMW, refer to Note 2, Business Combinations, in the Notes to Consolidated Financial Statements included in Part II, Item 8, "Financial Statements and Supplementary Data" of this Annual Report on Form 10-K. We expect the existing backlog of orders will be filled in early fiscal 2020.

Competition

Our products are sold in highly competitive markets throughout the world. The principal competitive factors in our markets are product innovation, quality and reliability, pricing, product support and customer service, warranty, brand awareness, reputation, distribution, shelf space, and financing options. We believe we offer total solutions and full service packages with high quality products that have the latest technology and design innovations. In addition, by selling our products through a network of distributors, dealers, mass retailers, hardware retailers, home centers, as well as online (direct to end-users), users are offered comprehensive service support during and after the warranty period. We compete in many product lines with numerous manufacturers, some of which have substantially larger operations and financial resources than us. We believe that we have a competitive advantage because we manufacture a broad range of product lines, we are committed to product innovation and customer service, we have a strong history in and focus on professional and residential landscapes and CMW has a similar history in and focus in the underground construction industry, and our distribution channels position us well to compete in various markets.

Internationally, our Residential segment products face more competition because many foreign competitors design, manufacture, and market products in their respective countries. We experience this competition primarily in Europe. In addition, fluctuations in the value of the U.S. dollar affect the price of our products in foreign markets, thereby impacting their competitiveness. We provide pricing support, as appropriate, to foreign customers to remain competitive in international markets.

Employees

During fiscal 2019, we employed an average of 8,237 employees. The total number of employees as of October 31, 2019 was 9,329. We consider our employee relations to be good. As of October 31, 2019, we had four collective bargaining agreements that expire in October 2020, March 2022, May 2022, and October 2022, covering approximately 13.0 percent of our total employees.

Environmental Matters and Other Governmental Regulation

We are subject to numerous international, federal, state, and other governmental laws, rules, and regulations relating to, among others, climate change; emissions to air, including Tier 4 or similar engine emission regulations; discharges to water; restrictions placed on water usage and water availability; product and associated packaging; use of certain chemicals; restricted substances, including "conflict minerals" disclosure rules; import and export compliance, including country of origin certification requirements; worker and product user health and safety; energy efficiency; product life-cycles; outdoor noise laws; and the generation, use, handling, labeling, collection, management, storage, transportation, treatment, and disposal of hazardous substances, wastes, and other regulated materials. For example:

  • The U.S. EPA, the California Air Resources Board, and similar regulators in other U.S. states and foreign jurisdictions in which we sell our products have phased in, or are phasing in, emission regulations setting maximum emission standards for certain equipment. Specifically, these agencies from time to time adopt increasingly stringent engine emission regulations. Following the EPA implementation of Tier 4 emission requirements applicable to diesel engines several years ago, China and the European Union ("EU") also have adopted similar regulations, and similar emission regulations are also being considered in other markets in which we sell our products.
  • The U.S. federal government, several U.S. states, and certain international jurisdictions in which we sell our products, including the EU and each of its member states, have implemented one or more of the following: (i) product life-cycle laws, rules, or regulations, which are intended to reduce waste and environmental and human health impact, and require manufacturers to label, collect, dispose, and recycle certain products, including some of our products, at the end of their useful life, including the Waste Electrical and Electronic Equipment directive, which mandates the labeling, collection, and disposal of specified waste electrical and electronic equipment; (ii) the Restriction on the use of Hazardous Substances directive or similar substance level laws, rules, or regulations, which restrict the use of several specified hazardous materials in the manufacture of specific types of electrical and electronic equipment; (iii) the Registration, Evaluation, Authorization and Restriction of Chemicals directive or similar substance level laws, rules, or regulations that require notification of use of certain chemicals, or ban or restrict the use of certain chemicals; (iv) country of origin

laws, rules, or regulations, which require certification of the geographic origin of our finished goods products and/or components used in our products through documentation and/or physical markings, as applicable; (v) energy efficiency laws, rules, or regulations, which are intended to reduce the use and inefficiencies associated with energy and natural resource consumption and require specified efficiency ratings and capabilities for certain products; (vi) outdoor noise laws, which are intended to reduce noise emissions in the environment from outdoor equipment; (vii) conflict minerals laws, such as the Dodd-Frank Wall Street Reform and Consumer Protection Act and the rules promulgated by the U.S. Securities and Exchange Commission ("SEC"), which require specific procedures for the determination and disclosure of the use of certain minerals, known as "conflict minerals," which are mined from the Democratic Republic of the Congo and adjoining countries; and (viii) other product substance restriction laws, some of which require certain labeling of products, such as California Proposition 65.

  • Our products, when used by residential users, may be subject to various federal, state, and international laws, rules, and regulations that are designed to protect consumers, including rules and regulations of the U.S. Consumer Product Safety Commission.

Although we believe that we are in substantial compliance with currently applicable laws, rules, and regulations, we are unable to predict the ultimate impact of adopted or future laws, rules, and regulations on our business, properties or products. Such laws, rules, or regulations may cause us to incur significant expenses to achieve or maintain compliance, may require us to modify our products, may adversely affect the price of or demand for some of our products, and may ultimately affect the way we conduct our operations. Failure to comply with these current or future laws, rules, or regulations could result in harm to our reputation and/or could lead to fines and other penalties, including restrictions on the importation of our products into, or the sale of our products in, one or more jurisdictions until compliance is achieved.

We are also involved in the evaluation and environmental clean-up of a limited number of properties currently and previously owned. We do not expect that these matters will have a material adverse effect on our Consolidated Financial Position or Results of Operations.

Available Information

We are a U.S. public reporting company under the Securities Exchange Act of 1934, as amended ("Exchange Act"), and file reports, proxy statements, and other information with the SEC. Copies of these reports, proxy statements, and other information can be accessed from the SEC's home page on the Internet at http://www.sec.gov.

We make available, free of charge on our website www.thetorocompany.com (http://www.thetorocompany.com) (select the "Investor Information" link and then the "Financials & Filings" link), our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, Proxy Statements on

Schedule 14A, Section 16 reports, amendments to those reports, and other documents filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act as soon as reasonably practicable after we electronically file such material with, or furnish it to, the SEC. The information contained on our website or connected to our website is not incorporated by reference into this Annual Report on Form 10-K and should not be considered part of this report.

Forward-Looking Statements

This Annual Report on Form 10-K contains, or incorporates by reference, not only historical information, but also forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended ("Securities Act"), and Section 21E of the Exchange Act and that are subject to the safe harbor created by those sections. In addition, we or others on our behalf may make forward-looking statements from time to time in oral presentations, including telephone conferences and/or web casts open to the public, in press releases or reports, on our websites or otherwise. Statements that are not historical are forward-looking and reflect expectations and assumptions. Forward-looking statements are based on our current expectations of future events, and often can be identified in this report and elsewhere by using words such as "expect," "strive," "looking ahead," "outlook," "guidance," "forecast," "goal," "optimistic," "anticipate," "continue," "plan," "estimate," "project," "believe," "should," "could," "will," "would," "possible," "may," "likely," "intend," "can," "seek," "potential," "pro forma," or the negative thereof and similar expressions or future dates. Our forward-looking statements generally relate to our future performance, including our anticipated operating results, liquidity requirements, and financial condition; our business strategies and goals; the integration of CMW; and the effect of laws, rules, policies, regulations, tax reform, new accounting pronouncements, and outstanding litigation on our business and future performance.

Forward-looking statements involve risks and uncertainties that could cause actual results to differ materially from those projected or implied. The most significant factors known to us that could materially adversely affect our business, reputation, operations, industry, financial position, or future financial performance are described below in Part I, Item 1A, "Risk Factors." We caution readers not to place undue reliance on any forward-looking statement which speaks only as of the date made and to recognize that forward-looking statements are predictions of future results, which may not occur as anticipated. Actual results could differ materially from those anticipated in the forward-looking statements and from historical results, due to the risks and uncertainties described elsewhere in this report, including in Part I, Item 1A, "Risk Factors," as well as others that we may consider immaterial or do not anticipate at this time. The risks and uncertainties described in this report, including in Part I, Item 1A, "Risk Factors," are not exclusive and further information concerning our company and our businesses, including factors that potentially could materially affect our operating results or financial condition, may emerge from time to time.

We make no commitment to revise or update any forward-looking statements in order to reflect actual results, events or circumstances occurring or existing after the date any forward-looking statement is made, or changes in factors or assumptions affecting such forward-looking statements. We advise you, however, to consult any further disclosures we make on related subjects in our future Quarterly Reports on Form 10-Q and Current Reports on Form 8-K that we file with, or furnish to, the SEC.

Risk factors

As filed, 79,480 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

The following are significant risk factors known to us that could materially adversely affect our business, reputation, operating results, industry, financial position, or future financial performance:

Our net sales and earnings could be adversely affected by economic conditions and outlook in the U.S. and in other countries in which we conduct business.

Adverse economic conditions and outlook in the U.S. and in other countries in which we conduct business can impact demand for our products and, ultimately, our net sales and earnings. These include, but are not limited to, recessionary conditions; slow or negative economic growth rates; the impact of U.S. federal debt, state debt, and sovereign debt defaults and austerity measures by certain European countries; reduced governmental or municipal spending; slow down or reductions in levels of golf course development, renovation, and improvement; golf course closures; reduced levels of home ownership, construction, and sales; home foreclosures; negative consumer confidence; reduced consumer spending levels resulting from tax increases or other factors; increased unemployment rates; prolonged high unemployment rates; higher costs of commodities, components, parts, and accessories and/or transportation-related costs, including as a result of inflation, changing prices, tariffs, and/or duties; inflationary or deflationary pressures; reduced credit availability or unfavorable credit terms for our distributors, dealers, and end-user customers; higher short-term, mortgage, and other interest rates; reduced infrastructure spending; and general economic and political conditions and expectations. In the past, some of these factors have caused our distributors, dealers, and end-user customers to reduce spending and delay or forego purchases of our products, which have had an adverse effect on our net sales and earnings.

Weather conditions may reduce demand for some of our products and adversely affect our net sales or otherwise adversely affect our operating results.

From time to time, weather conditions in a particular geographic region may adversely affect sales, demand, and field inventory levels of some of our products. For example, in the past, drought or unusually wet conditions have had an adverse effect on sales of certain mowing equipment products, unusually rainy weather or severe drought conditions that result in watering bans, or otherwise, have had an adverse effect on sales of our irrigation products, and lower snowfall accumulations in key markets have had an adverse effect on sales of our Residential snow thrower products and products of our Professional snow and ice management business. Similarly, adverse weather conditions in one season may negatively impact customer purchasing patterns and net sales for some of our products in another season. For example, lower snowfall accumulations may result in lower winter season revenues for landscape contractor professionals, causing such customers to forego or postpone spring purchases of our mowing equipment products. To the extent that unfavorable weather conditions are exacerbated by global climate change or otherwise, our sales and operating results may be affected to a greater degree than we have previously experienced.

Fluctuations in foreign currency exchange rates have affected our operating results and could continue to result in declines in our reported net sales and net earnings.

Because the functional currency of most of our foreign operations is the applicable local currency, and because our financial reporting currency is the U.S. dollar, preparation of our Consolidated Financial Statements requires that we translate the assets, liabilities, expenses, and revenues of our foreign operations into U.S. dollars at the applicable exchange rate. Accordingly, we are exposed to foreign currency exchange rate risk arising from transactions in the normal course of business, such as sales and loans to wholly owned subsidiaries, sales to third-party customers, purchases from suppliers, and bank lines of credit with creditors denominated in foreign currencies. Our primary foreign currency exchange rate exposure is with the Euro, the Australian dollar, the Canadian dollar, the British pound, the Mexican peso, the Japanese yen, the Chinese Renminbi, and the Romanian New Leu against the U.S. dollar, as well as the Romanian New Leu against the Euro.

Our reported net sales and net earnings are subject to fluctuations in foreign currency exchange rates that have affected our operating results and could continue to result in declines in our reported net sales and net earnings. Because our products are manufactured or sourced primarily from the U.S. and Mexico, a stronger U.S. dollar and Mexican peso generally have a negative impact on our operating results, while a weaker U.S. dollar and Mexican peso generally have a positive effect. In addition, currency exchange rate fluctuations may affect the comparative prices between products we sell and products our foreign competitors sell in the same market, which may adversely affect demand for our products. Substantial exchange rate fluctuations as a result of the strengthening of the U.S. dollar or otherwise, may have an adverse effect on our operating results, financial condition, and cash flows, as well as the comparability of our Consolidated Financial Statements between reporting periods. Further, we may also experience foreign currency exchange rate exposure as a result of the volatility and uncertainty that may arise as a result of the United Kingdom's process for exiting the EU.

While we actively manage the exposure of our foreign currency market risk in the normal course of business by entering into various derivative instruments to hedge against such risk, these derivative instruments involve risks and may not effectively limit our underlying exposure to foreign currency exchange rate fluctuations or minimize our net earnings and cash volatility

associated with foreign currency exchange rate changes. Further, the failure of one or more counterparties to our foreign currency exchange rate contracts to fulfill their obligations to us could adversely affect our operating results.

Increases in the cost of commodities, components, parts, and accessories that we purchase and/or increases in our other costs of doing business, have, and could continue to, adversely affect our profit margins and businesses.

We purchase commodities, components, parts, and accessories for use in our manufacturing process and end-products or to be sold as standalone end-products. Most of the commodities, components, parts, and accessories used in our manufacturing process and end-products are exposed to commodity cost changes, including, for example, as a result of inflation, deflation, changing prices, tariffs, and/or duties. Our primary commodity cost exposures are with steel, aluminum, petroleum and natural gas-based resins, copper, lead, rubber, linerboard, and others. To the extent that commodity, component, parts, or accessories costs increase, as a result of inflation, tariffs, duties, or otherwise, and we do not have firm pricing from our suppliers, or our suppliers are not able to honor such prices, we may experience a decline in our profit margins. Furthermore, changes to international trade policies or agreements could result in additional tariffs, duties or other charges on commodities, components, parts or accessories we import into the U.S. and/or use in our products. In addition, increases in other costs of doing business may also adversely affect our profit margins and businesses. For example, an increase in fuel costs and/or freight rates may result in an increase in our transportation costs, which also could adversely affect our operating results and businesses.

Historically, we have mitigated commodity, component, parts, or accessories cost increases, in part, by collaborating with suppliers, reviewing alternative sourcing options, substituting materials, utilizing Lean methods, engaging in internal cost reduction efforts, and increasing prices on some of our products, all as appropriate. However, we may not be able to fully offset increased commodity, component, parts, or accessories costs in the future. Further, if our price increases are not accepted by our customers and the market, our net sales, profit margins, earnings, and market share could be adversely affected.

Disruption and/or shortages in the availability of commodities, components, parts, or accessories used in our products has, and could continue to, adversely affect our business.

Although most of the commodities, components, parts or accessories used in our end-products or sold as standalone end-products are generally commercially available from a number of sources and in adequate supply, certain items are sourced from single suppliers. Any disruption or shortages in the availability of commodities, components, parts, or accessories used in our end-products or sold as standalone end-products, including as a result of labor staffing or other challenges that may be experienced by our suppliers, natural disasters, adverse weather, or other events, our inability to timely or otherwise obtain substitutes for such items, or any deterioration in our relationships with, the financial viability or quality of, or the personnel relationships at, our suppliers, could adversely affect our business and operating results.

Our Professional segment includes a variety of product portfolios that are dependent upon certain and varied factors.

Our Professional segment includes a variety of product portfolios that are sold by distributors or dealers, or directly to government customers, rental companies, construction companies, and professional users engaged in maintaining and creating properties and landscapes, such as golf courses, sports fields, residential and commercial properties and landscapes, and governmental and municipal properties. Among other things, any one or a combination of the following factors could result in a decrease in spending and demand for our products and have an adverse effect on our Professional segment net sales:

  • reduced levels of investment in golf course renovations and improvements and new golf course development; reduced revenue for golf courses resulting from a decrease in rounds played and/or memberships, as applicable; and increased number of golf course closures;
  • reduced consumer and business spending on property maintenance, such as lawn care and snow and ice removal activities, and/or unfavorable weather conditions, causing property owners and landscape contractor professionals to forego or postpone purchases of our products;
  • low or reduced levels of residential, commercial, and/or municipal construction projects and/or infrastructure improvements;
  • a decline in acceptance of and demand for ag-irrigation solutions for agricultural production;
  • availability of cash or credit on acceptable terms to finance new product purchases; and
  • customer and/or government budgetary constraints resulting in reduced spending for grounds maintenance or construction equipment.

Our Residential segment net sales are dependent upon consumers buying our Residential segment products at dealers, mass retailers, and home centers; the amount of product placement at mass retailers and home centers; consumer confidence and spending levels; changing buying patterns of customers; and the impact of significant sales or promotional events.

The elimination or reduction of shelf space assigned to our Residential segment products or other changes to the placement of our products by or at mass retailers and home centers, could adversely affect our Residential segment net sales. Our Residential segment net sales also are dependent upon the buying patterns of consumers and changing buying patterns of consumers could result in reduced sales of one or more of our Residential segment products. For example, as consumers purchase products at home centers and mass retailers that offer broader and lower price points than dealers, we have experienced increased demand and sales of our Residential segment products purchased at mass retailers and home centers. Historically, The Home Depot has been a substantial customer

of ours, which accounted for approximately 10.0 percent of our total consolidated gross sales in fiscal 2017. We believe that our diverse distribution channels and customer base should reduce the long-term impact on us if we were to lose any substantial customer. However, the loss of any substantial customer, a significant reduction in sales to such customers, or our inability to maintain adequate product placement at mass retailers and home centers or our inability to respond to future changes in buying patterns of consumers or new distribution channels could have a material adverse impact on our business and operating results. Furthermore, our quarterly or annual results can be impacted as a result of the timing of significant sales or promotional events for our Residential products.

Changes in our product mix between reportable segments and/or within a reportable segment could adversely impact our financial performance, including profit margins and net earnings.

Our Professional segment products generally have higher profit margins than our Residential segment products. Accordingly, our financial performance, including our profit margins and net earnings, can be impacted depending on the mix of products we sell during a given period. For example, if we experience lower sales of our Professional segment products that generally carry higher profit margins than our Residential segment products, our financial performance, including profit margins and net earnings, could be negatively impacted. Similarly, within each reportable segment, if we experience lower sales of products that generally carry higher profit margins, our financial performance, including profit margins and net earnings, could be negatively impacted.

We intend to grow our business in part through acquisitions and alliances, strong customer relations, and new joint ventures, investments, and partnerships, which could be risky and may harm our business, reputation, financial condition, and operating results.

One of our strategies is to drive growth in our businesses and accelerate opportunities to expand our global presence through targeted acquisitions and alliances, such as our CMW acquisition, strong customer relations, and new joint ventures, investments, and partnerships that add value while supplementing and complementing our existing brands and product portfolio. Our ability to grow through acquisitions will depend, in part, on the availability of suitable candidates at acceptable prices, terms, and conditions, our ability to compete effectively for acquisition candidates, and the availability of capital and personnel resources to complete such acquisitions and run and integrate the acquired business effectively. Any acquisition, alliance, joint venture, investment, or partnership could impair our business, financial condition, reputation, and operating results. The benefits of an acquisition, or new alliance, joint venture, investment, or partnership may take more time than expected to develop or integrate into our operations, and we cannot guarantee that previous or future acquisitions, alliances, joint ventures, investments, or partnerships will, in fact, produce any benefits. Acquisitions, alliances, joint ventures, investments, and partnerships may involve a number of risks, the occurrence of which could adversely affect our business, reputation, financial condition, and operating results, including:

  • diversion of management's attention;
  • disruption to our existing operations and plans;
  • inability to effectively manage our expanded operations;
  • difficulties or delays in integrating and assimilating information and financial systems, operations, manufacturing processes and products of an acquired business or other business venture or in realizing projected efficiencies, growth prospects, cost savings, and synergies;
  • inability to successfully integrate or develop a distribution channel for acquired product lines;
  • potential loss of key employees, customers, distributors, or dealers of the acquired businesses or adverse effects on existing business relationships with suppliers, customers, distributors, and dealers;
  • write-off of significant amounts of goodwill, other intangible assets, and/or long-lived assets as a result of deterioration in the performance of an acquired business or product line, adverse market conditions, changes in the competitive landscape, changes in laws or regulations that restrict activities of an acquired business or product line, or as a result of a variety of other circumstances;
  • delays or challenges in transitioning distributors and dealers of acquired businesses to available floor plan financing arrangements;
  • violation of confidentiality, intellectual property, and non-compete obligations or agreements by employees of an acquired business or lack of or inadequate formal intellectual property protection mechanisms in place at an acquired business;
  • adverse impact on overall profitability if our expanded operations do not achieve the financial results projected in our valuation models;
  • reallocation of amounts of capital from other operating initiatives and/or an increase in our leverage and debt service requirements to pay acquisition purchase prices or other business venture investment costs, which could in turn restrict our ability to access additional capital when needed or pursue other important elements of our business strategy;
  • failure by acquired businesses or other business ventures to comply with applicable international, federal, and state product safety or other regulatory standards;
  • infringement by acquired businesses or other business ventures of intellectual property rights of others;
  • inaccurate assessment of additional post-acquisition or business venture investments, undisclosed, contingent or other liabilities or problems, unanticipated costs associated with an acquisition or other business venture, and an inability to recover or manage such liabilities and costs; and
  • incorrect estimates made in the accounting for acquisitions and incurrence of non-recurring charges.

In addition, effective internal controls are necessary for us to provide reliable and accurate financial reports and to effectively

prevent fraud. The integration of acquired businesses may result in our systems and controls becoming increasingly complex and more difficult to manage. We devote significant resources and time to comply with the internal control over financial reporting requirements of the Sarbanes-Oxley Act of 2002. However, we cannot be certain that these measures will ensure that we design, implement, and maintain adequate control over our financial processes and reporting in the future, particularly in the context of acquisitions of other businesses, regardless of whether such acquired business was previously privately or publicly held. Any difficulties in the assimilation of acquired businesses into our internal control framework could harm our operating results or cause us to fail to meet our financial reporting obligations. Also, some acquisitions may require the consent of the lenders under our credit agreements. We cannot predict whether such approvals would be forthcoming or the terms on which the lenders would approve such acquisitions. These risks, among others, could be heightened if we complete a large acquisition or other business venture or multiple transactions within a relatively short period of time.

Our recent acquisition of The Charles Machine Works, Inc. involves a number of risks, the occurrence of which could adversely affect our business, financial condition, and operating results.

On April 1, 2019, we completed our acquisition of CMW. Such acquisition involves certain risks, the occurrence of which could adversely affect our business, financial condition, and operating results, including:

  • diversion of management's attention to manage the CMW businesses and integrate CMW’s operations;
  • disruption to our existing operations and plans or inability to effectively manage our expanded operations;
  • failure, difficulties or delays in securing, integrating and assimilating information, financial systems, internal controls, operations, manufacturing processes and products, or the distribution channel for CMW’s businesses and product lines;
  • potential loss of key employees, customers, distributors, dealers, or suppliers or other adverse effects on existing business relationships with customers, distributors, dealers, and suppliers;
  • adverse impact on overall profitability if our expanded operations do not achieve the growth prospects, net sales, earnings, cost or revenue synergies, or other financial results projected in our valuation models, delays in the realization thereof or costs or charges incurred to achieve any revenue or cost synergies, including as a result of the Toro underground wind down or otherwise;
  • the increase in our leverage and debt service requirements to fund the purchase price of the acquisition could restrict our ability to access additional capital when needed, result in a decrease in our credit rating, or limit our ability to pursue other important elements of our business strategy;
  • inaccurate assessment of undisclosed, contingent or other liabilities, unanticipated costs associated with the acquisition, and despite the existence of representations, warranties and indemnities in the merger agreement and a

representation and warranty insurance policy, an inability to recover or manage such liabilities and costs; and

  • impacts as a result of purchase accounting adjustments, incorrect estimates made in the accounting for the acquisition, or the potential future write-off of significant amounts of goodwill, intangible assets and/or other tangible long-lived assets if the CMW business does not perform in the future as expected, or other potential financial accounting or reporting impacts.

We may be required to incur impairment and other charges resulting from the impairment of goodwill or other intangible assets recorded in connection with acquisitions.

We recently completed the CMW acquisition and expect to continue to complete selected acquisitions in the future as a component of our growth strategy. In connection with acquisitions, applicable accounting standards generally require the net tangible and intangible assets of the acquired business to be recorded on the balance sheet of the acquiring company at their fair values as of the date of acquisition. Any excess in the purchase price paid by the acquiring company over the fair value of net tangible and intangible assets of the acquired business is recorded as goodwill. Definite lived-intangible assets other than goodwill are required to be amortized over their estimated useful lives and this amortization expense may be significant. If it is later determined that the anticipated future cash flows from the acquired business may be less than the carrying values of the assets and goodwill of the acquired business, the assets, including both definite-lived and indefinite-lived intangible assets, or goodwill may be deemed to be impaired. In this case, the acquiring company may be required under applicable accounting rules to write down the value of the assets or goodwill on its balance sheet to reflect the extent of the impairment. This write-down of assets or goodwill is generally recognized as a non-cash expense in the statement of operations of the acquirunsuing company for the accounting period during which the write down occurs. As of October 31, 2019, we had goodwill of $362.3 million, which is maintained in various reporting units, including goodwill from the CMW acquisition, and other intangible assets of $352.4 million, which together comprise 30.7 percent of our total assets as of October 31, 2019. If we determine that our goodwill or other intangible assets recorded in connection with the CMW acquisition or any other prior or future acquisitions have become impaired, we will be required to record a charge resulting from the impairment. Impairment charges could be significant and could adversely affect our consolidated results of operations and financial position.

Our labor needs, and those of our suppliers and distribution channel partners, fluctuate throughout the year and by region. Any failure by us, or our suppliers or distribution channel partners, to hire and/or retain a labor force to adequately staff manufacturing operations, perform service or warranty work, or other necessary activities or by such labor force to adequately and safely perform their jobs could, among other things, result in disruptions in our manufacturing and other processes, which have, and could

continue to, adversely affect our business and operating results and, our reputation could suffer.

Our labor needs, and those of our suppliers and distribution channel partners, fluctuate throughout the year and by region. During periods of peak manufacturing activity it is often necessary to sharply increase the number of production staff by utilizing new hires and temporary labor. Production staff hired during such periods of peak manufacturing activity may not have the same level of training, competency, experience, or commitment as regular production employees. In addition, as a result of low unemployment rates, a limited workforce population available in areas around the locations where we, or our suppliers and distribution channel partners, manufacture products or conduct business, or other factors, we, or our suppliers and distribution channel partners, may not have a sufficient pool of experienced and competent individuals with the right skills available to fulfill labor requirements on a cost-effective basis or otherwise. If we, or our suppliers and distribution channel partners, are unable to hire and/or retain a labor force to adequately staff manufacturing operations, perform service or warranty work, or other necessary activities, particularly during periods of peak manufacturing activity, or if such labor force is not adequately trained or does not adhere to protocols established to create a safe workplace, we could experience, among other things, disruptions in our manufacturing and other processes, which could adversely impact our business, operating results and reputation.

Failure to successfully complete divestitures or other restructuring activities could negatively affect our operations.

From time to time, we may divest of all or a portion of certain businesses, joint venture or minority equity investment interests, subsidiaries, or product categories. For example, during the fourth quarter of fiscal 2019, we divested of a used underground construction equipment business, which we acquired as a result of our acquisition of CMW. Divestitures involve risk, including, potential increased expense associated with the divestitures, potential issues with the customers or suppliers of the divested business or products, and potential issues with the acquirers of any divested business. Additionally, from time to time, we may wind down certain business activities, product lines, and/or perform other organizational restructuring projects in an effort to reduce costs and streamline operations. For example, in fiscal 2019, we decided to wind down our Toro-branded large directional drill and riding trencher product categories and pursue other organizational restructuring activities as part of our initial CMW integration objectives. Such activities involve risks as they may divert management's attention from our core businesses, increase expenses on a short‑term basis and lead to potential issues with employees, customers or suppliers. If these activities are not completed in a timely manner, anticipated cost savings, synergies and efficiencies are not realized, business disruption occurs during the pendency of or following such activities, or unanticipated charges are incurred, particularly if material, there may be a negative effect on our business, financial condition, results of operations and cash flows.

If we underestimate or overestimate demand for our products and do not maintain appropriate inventory levels, our net sales and/or working capital could be negatively impacted.

Our ability to manage our inventory levels to meet our customers' demand for our products is important for our business. Our production levels and inventory management goals for our products are based on estimates of demand for our products, taking into account production capacity, timing of shipments, and field inventory levels. If we overestimate or underestimate both channel and retail demand for any of our products during a given season, we may not maintain appropriate inventory levels, which could negatively impact our net sales, profit margins, net earnings, and/or working capital, hinder our ability to meet customer demand, result in loss of customers, or cause us to incur excess and obsolete inventory charges.

Our business and operating results are subject to the inventory management decisions of our distribution channel customers.

We are subject to risks relating to the inventory management decisions and operational and sourcing practices of our distribution network. Our distribution channel customers carry inventories of our products as part of their ongoing operations and adjust those inventories based on their assessments of future needs, including anticipated end-customer demand. Such adjustments may impact our inventory management and working capital goals as well as operating results. If the inventory levels of our distribution channel customers are higher than they desire, they may postpone product purchases from us, which could cause our sales to be lower than the end-user demand for our products and negatively impact our inventory management and working capital goals as well as our operating results. Similarly, our results could be negatively impacted through the loss of sales if either we do not produce an adequate supply of products for our distribution channel and/or our distribution channel customers do not maintain field inventory levels sufficient to meet end-user demand.

Changes in composition of, financial viability of, and the relationships with, our distribution channel customers could negatively impact our business and operating results.

If we fail to maintain an effective network of dealers and distributors for our products, we may not have adequate market coverage for the optimal level of sales of our products. Additionally, our distribution channel customers may not commit the necessary resources to market and sell our products to the level of our expectations, and, regardless of the resources they commit, they may not be successful. Any weak demand for, or quality issues with, our products may cause our distribution channel customers to reduce or terminate their relationships with us or adversely affect our ability to engage new dealers and distributors. Changes in the ownership or control of our distribution channel customers could also adversely affect our relationships with them. If we are not able to maintain effective distribution channels, if our distribution channel customers are not successful in the marketing and selling our products, or if we experience a significant reduction in, cancellation or change in the size and timing of orders from

our distribution channel customers, our sales could decline and have an adverse effect on our business and operating results.

In addition, if adverse economic or business conditions or other events causes a decline in sales by our distribution channel customers or weakens their financial condition, our net sales and earnings could be adversely affected. Such situation could adversely affect the ability of such customers to pay amounts owed, which could require us to repurchase financed product.

We face intense competition in all of our product lines with numerous manufacturers, including some that have larger operations and greater financial resources than us. We may not be able to compete effectively against competitors' actions, which could harm our business and operating results.

Our products are sold in highly competitive markets throughout the world. Principal competitive factors in our markets include product innovation, quality and reliability, pricing, product support and customer service, warranty, brand awareness, reputation, distribution, product availability, product placement and shelf space, and financing options. We compete in many product lines with numerous manufacturers, some of which have substantially larger operations and greater financial resources than us. As a result, they may be able to adapt more quickly to new or emerging technologies and changes in customer preferences, or devote greater resources to the development, promotion, and sale of their products or disruptive new products or technologies than we can. In addition, competition could increase if new companies enter the market, existing competitors combine or consolidate their operations or if existing competitors expand their product lines or intensify efforts within existing product lines. Our current products, products under development, and our ability to develop new and improved products may be insufficient to enable us to compete effectively with our competitors. Internationally, our Residential segment products typically face more competition because many foreign competitors design, manufacture, and market products in their respective countries. We experience this competition primarily in Europe. In addition, fluctuations in the value of the U.S. dollar may affect the price of our products in foreign markets, thereby impacting their competitiveness. We may not be able to compete effectively against competitors' actions, which may include the movement by competitors with manufacturing operations to low cost countries for significant cost and price reductions, and which could harm our business and operating results.

A significant percentage of our consolidated net sales is generated outside of the U.S., a portion of which is financed by third-parties, and we intend to continue to expand our international operations. Our international operations require significant management attention and financial resources, expose us to difficulties presented by international economic, political, legal, regulatory, accounting, and business factors, and may not be successful or produce desired levels of net sales.

We currently manufacture our products in the U.S., Mexico, Australia, the United Kingdom, Italy, Romania, Germany, Poland, and China for sale throughout the world. We maintain sales offices in the U.S., Belgium, the United Kingdom, Australia, Japan, China, Italy, Poland, Germany, Spain, and France. Our net sales outside the U.S. were 23.1 percent, 24.6 percent, and 24.4 percent of our total consolidated net sales for fiscal 2019, 2018, and 2017, respectively. International markets have been, and will continue to be, a focus for us for revenue growth, both organically and through acquisitions. We believe many opportunities exist in the international markets, and over time, we intend for international net sales to comprise a larger percentage of our total consolidated net sales. Several factors, including the implications of the United Kingdom's process for exiting the EU, implications of withdrawal by the U.S. from, or revisions to, international trade agreements, foreign trade or other policy changes between the U.S. and other countries, weakened international economic conditions or the impact of sovereign debt defaults by certain European countries, could adversely affect our international net sales. Additionally, the expansion of our existing international operations and entry into additional international markets require significant management attention and financial resources. Many of the countries in which we manufacture or sell our products, or otherwise have an international presence are, to some degree, subject to political, economic, and/or social instability. Our international operations expose us and our representatives, agents, and distribution channel customers to risks inherent in operating in foreign jurisdictions. These risks include:

  • increased costs of customizing products for foreign countries;
  • difficulties in managing and staffing international operations and increases in infrastructure costs including legal, tax, accounting, and information technology;
  • the imposition of additional U.S. and foreign governmental controls or regulations;
  • new or enhanced trade restrictions and restrictions on the activities of foreign agents, representatives, and distribution channel customers;
  • withdrawal from or revisions to international trade policies or agreements and the imposition or increases in import and export licensing and other compliance requirements, customs duties and tariffs, import and export quotas and other trade restrictions, license obligations, and other non-tariff barriers to trade;
  • the imposition of U.S. and/or international sanctions against a country, company, person, or entity with whom we do business that would restrict or prohibit our business with the sanctioned country, company, person, or entity;
  • international pricing pressures;
  • laws and business practices favoring local companies;
  • adverse currency exchange rate fluctuations;
  • longer payment cycles and difficulties in enforcing agreements and collecting receivables through certain foreign legal systems;
  • higher tax rates and potentially adverse tax consequences, including restrictions on repatriating cash and/or earnings to the U.S.;
  • fluctuations in our operating performance based on our geographic mix of sales;
  • transportation delays and interruptions;
  • national and international conflicts, including foreign policy changes, acts of war or terrorist acts;
  • difficulties in protecting, enforcing or defending intellectual property rights; and
  • multiple, changing, and often inconsistent enforcement of laws, rules, regulations and standards, including rules relating to taxes, environmental, health and safety matters.

Our international operations may not produce desired levels of net sales or, among other things one or more of the factors listed above may harm our business and operating results. Any material decrease in our international sales or profitability could also adversely impact our operating results.

In addition, a portion of our international net sales is financed by third-parties. The termination of our agreements with these third-parties, any material change to the terms of our agreements with these third-parties or in the availability or terms of credit offered to our international customers by these third-parties, or any delay in securing replacement credit sources, could adversely affect our sales and operating results.

Brexit and political uncertainty in the United Kingdom and the EU could disrupt our operations and adversely affect our operating results.

We have manufacturing operations and a sales office in the United Kingdom. The United Kingdom’s intention to exit the EU, commonly referred to as “Brexit,” has caused significant political and economic uncertainty in the United Kingdom, EU, and elsewhere. The impact of Brexit and the resulting turmoil on the political and economic future of the United Kingdom and the EU is uncertain, and we may be adversely affected in ways we cannot currently anticipate. The ultimate effects of Brexit will depend, in part, on any agreements the United Kingdom makes to retain access to the EU markets, and vice versa, either during a transitional period or more permanently. Brexit also may result in significant changes in the British regulatory environment, which could increase our compliance costs. We may find it more difficult to conduct business in the United Kingdom and the EU, as Brexit may result in increased regulatory complexity and increased restrictions on the movement of capital, goods and personnel. Any of these effects of Brexit, and other similar referenda that we cannot anticipate, could disrupt our operations and adversely affect our operating results.

Changes to or withdrawal from trade regulation, quotas, duties, agreements, policies, or tariffs, caused by the changing U.S. and geopolitical environments or otherwise, may negatively impact our business, operating results and financial condition.

Uncertainty exists regarding the future relationship between the U.S. and other countries with respect to trade regulation, quotas, duties, agreements, policies, and tariffs. The current U.S. administration has called for support for implementing and, in some instances, has already proposed or taken action with respect to major changes to certain trade agreements or policies. Furthermore, the U.S. or other countries that are parties to various trade agreements may not approve or ratify any new or revised trade agreements. Implications of withdrawal by the U.S. from, or revisions to, international trade agreements, foreign trade or other policy changes between the U.S. and other countries could adversely and materially affect our business, operating results, and financial condition.

If we are unable to continue to enhance existing products, as well as develop and market new products, that respond to customer needs and preferences and achieve market acceptance, we may experience a decrease in demand for our products, and our net sales, which have historically benefited from the introduction of new products, may be adversely affected.

One of our strategies is to develop innovative, customer-valued products to generate revenue growth. In the past, our sales from new products, which we define as those introduced in the current and previous two fiscal years, have represented a significant component of our net sales and are expected to continue to represent a significant component of our future net sales. We may not be able to compete as effectively with our competitors, and ultimately satisfy the needs and preferences of our customers, unless we can continue to enhance existing products and develop new innovative products for the markets in which we compete, including by incorporating new, emerging, and/or disruptive technologies that may become preferred by our customers. Product development requires significant financial, technological, talent, and other resources. Product improvements and new product introductions also require significant research, planning, design, development, engineering, and testing at the technological, product, and manufacturing process levels and we may not be able to timely develop and introduce product improvements or new products. Our competitors' new products may beat our products to market, be higher quality or more reliable, be more effective with more features and/or less expensive than our products, incorporate new, emerging, and/or disruptive technologies, obtain better market acceptance, or render our products obsolete. Any new products that we develop may not receive market acceptance or otherwise generate any meaningful net sales or profits for us relative to our expectations based on, among other things, existing and anticipated investments in manufacturing capacity and commitments to fund advertising, marketing, promotional programs, and research and development.

Any disruption at any of our facilities or in our manufacturing or other operations, or those of our distribution channel customers or suppliers, or our inability to cost-effectively expand existing, open and manage new or acquired, and/or move production between manufacturing facilities could adversely affect our business and operating results.

We currently manufacture most of our products at 14 locations in the U.S., two locations in both Mexico and China, and one location in each of Australia, Italy, the United Kingdom, Romania, Germany, and Poland. We also have several locations that serve as distribution centers, warehouses, test labs, service centers, and corporate offices. In addition, we have agreements with other third-party manufacturers to manufacture products on our behalf. We also market our products through domestic and international distributors, as well as a large number of dealers, hardware retailers, home centers, mass retailers and online, and source commodities, components, parts, and accessories from a variety of international and domestic suppliers.

Our facilities and our manufacturing and other operations and those of our distribution channel customers and suppliers may incur losses or experience disruptions as a result of natural disasters, inclement weather, and/or climate change-related events, such as tornadoes, hurricanes, earthquakes, floods, tsunamis, typhoons, drought, fire, other extreme weather conditions, and other natural disasters and events that occur as a result of such events, such as water or other natural resource shortages, rising sea levels, power shortages, or telecommunications failures. In addition, losses or disruptions could occur as a result of man-made disasters and other external events, such as terrorist acts or acts of war, pandemics, boycotts and sanctions or widespread criminal activities such as drug cartel-related violence that may disrupt our production activities and maquiladora operations based in Juarez, Mexico. A work slowdown, strike, or similar action could occur at any one of our facilities (or the facilities of our distribution channel customers and suppliers) currently operating under a collective bargaining agreement, such facilities could fail to renew or enter into new collective bargaining agreements, or we may have to enter into a new collective bargaining agreement at a facility not currently covered by an agreement. Furthermore, we could decide, or be forced, to shift production to one of our other manufacturing facilities or we may decide to open new or acquired manufacturing or distribution facilities or move production between our facilities to align production capacity with production goals.

Such events and disruptions could make it difficult or impossible to manufacture or to deliver products to our distribution channel customers, produce or maintain sufficient inventory of our products, meet the demands of our customers, receive commodities, components, parts or accessories from our suppliers, or perform critical functions, which could adversely affect our business globally or in certain regions. Such events also may result in shortages of commodities, components, parts, or accessories, higher fuel and commodity costs, and delays in shipments to our distribution channel customers. Our business and operating results could be impacted to a greater degree than we previously experienced to the extent that unfavorable weather conditions are exacerbated by global climate change or otherwise. Our insurance coverage with respect to natural disasters and other disruptions is limited and is subject to deductibles and coverage limits. Such coverage may not be adequate, or may not continue to be available at commercially reasonable rates and terms. The occurrence of any such events could negatively impact our business and operating results.

Management information systems are critical to our business. If our management information systems or those of our business partners or third-party service providers fail to adequately perform, or if we, our business partners, or third-party service providers experience an interruption in the operation of such systems, our business, reputation, financial condition, and operating results could be adversely affected.

We have many management information systems that are critical to our business, some of which are managed by third-parties. These management information systems are used to record, process, summarize, transmit, and store electronic information, and to manage or support a variety of business processes and activities, including, among other things, our accounting and financial functions, including maintaining our internal controls; our manufacturing and supply chain processes; and the data related to our research and development efforts.

We may be unable to enhance our existing management information systems or implement new management information systems when necessary, may experience unanticipated delays, complications or expenses in implementing, integrating and operating our systems, and/or require substantial expenditures as well as interruptions in operations in connection with any system changes we might pursue, including as may be necessary during the integration of CMW. The failure of our management information systems or those of our business partners or third-party service providers to perform properly, or difficulties encountered in the development of or transfer over to new systems or the modification or upgrade of existing systems, could disrupt our business and harm our reputation, which may result in decreased sales, increased overhead costs, excess or obsolete inventory, and product shortages, causing our business, reputation, financial condition, and operating results to suffer.

Additionally, we take steps to secure our management information systems and any access provided by our business partners or third-party service providers, including our computer systems, intranet and internet sites, email and other telecommunications and data networks. However, the security measures we have implemented may not be effective and our systems may be vulnerable to theft, loss, damage, and interruption from a number of potential sources and events, including unauthorized access or security breaches, natural or man-made disasters, cyber attacks, computer viruses, malware, phishing, denial of service attacks, power loss, or other disruptive events. Information technology security threats have been increasing in frequency and sophistication. Cyber attacks

may be random, coordinated, or targeted, including sophisticated computer crime threats. These threats pose a risk to the security of our systems and networks, and those of our business partners and third-party service providers, and to the confidentiality, availability, and integrity of our data. Our business, reputation, operating results, and financial condition could be adversely affected if, as a result of a significant cyber event or otherwise, our operations are disrupted or shutdown; our confidential, proprietary information is stolen or disclosed; our intranet and internet sites are compromised; data is manipulated or destroyed; we incur costs, are required to pay fines, or our customers lose confidence in our ability to adequately protect their information in connection with stolen or disclosed customer, employee, or other confidential or sensitive information; we must dedicate significant resources to system repairs or increase cyber security protection; or we otherwise incur significant litigation or other costs.

Our reliance upon patents, trademark laws, and contractual provisions to protect our proprietary rights may not be sufficient to protect our intellectual property from others who may sell similar products. In addition, our products may infringe the proprietary rights of others.

We hold patents relating to various aspects of our products and believe that proprietary technical know-how is important to our business and the loss of such intellectual property could have a material adverse effect on our business and operating results. Proprietary rights relating to our products are protected from unauthorized use by third-parties only to the extent that they are covered by valid and enforceable patents or are maintained in confidence as trade secrets. We cannot be certain that we will be issued any patents from any pending or future patent applications owned by or licensed to us, or that the claims allowed under any issued patents will be sufficiently broad to protect our technology. In the absence of enforceable patent protection, we may be vulnerable to competitors who attempt to copy our products or gain access to our trade secrets and know-how. Others may initiate litigation to challenge the validity of our patents, allege that we infringe their patents, or use their resources to design comparable products that do not infringe our patents. We may incur substantial costs if our competitors or others initiate litigation to challenge the validity of our patents, or allege that we infringe their patents, or if we initiate any proceedings to protect our proprietary rights. If the outcome of any such litigation is unfavorable to us, our business, operating results, and financial condition could be adversely affected.

We also cannot be certain that our products or technologies have not infringed or will not infringe the proprietary rights of others. Any such infringement could cause third-parties, including our competitors, to bring claims against us, resulting in significant costs, possible damages and substantial uncertainty. We could also be forced to develop an alternative that could be costly and time-consuming, or acquire a license, which we might not be able to do on terms favorable to us, or at all.

We rely on trade secrets and proprietary know-how that we seek to protect, in part, by confidentiality agreements with our employees, suppliers, consultants, and others. These agreements may be breached, and we may not have adequate remedies for any such breach. Even if these confidentiality agreements are not breached, our trade secrets may otherwise become known or be independently developed by competitors.

Our business, properties, and products are subject to governmental policies and regulations, with which compliance may require us to incur expenses, or modify our products or operations, and non-compliance may result in harm to our reputation and/or expose us to penalties. Governmental policies and regulations may also adversely affect the demand for some of our products and our operating results.

Our business, properties, and products are subject to numerous international, federal, state, and other governmental laws, rules, policies, and regulations relating to, among other things; climate change; emissions to air, including engine emission requirements; discharges to water; restrictions placed on water usage and water availability; product and associated packaging; use of certain chemicals; restricted substances, including "conflict minerals" disclosure rules; import and export compliance, including country of origin certification requirements; worker and product user health and safety; energy efficiency; product life-cycles; outdoor noise laws; the generation, use, handling, labeling, collection, management, storage, transportation, treatment, and disposal of hazardous substances, wastes, and other regulated materials; and the registration of certain technologies with various government agencies throughout the world and operation of those technologies within the limits imposed by those agencies, including but not limited to radio frequency, broadband or other wireless technologies and technologies within the airspace of commercial airplanes, such as unmanned aerial systems. In addition, our business is subject to numerous international, federal, state, and other governmental laws, rules, policies, and regulations that may adversely affect our operating results, including, (i) taxation and tax policy changes, tax rate changes, new tax laws, or revised tax law interpretations or guidance, including as a result of the Tax Act, which individually or in combination may cause our effective tax rate to increase or result in tax charges, (ii) healthcare laws or regulations, which may cause us to incur higher employee healthcare costs, or (iii) changes to U.S. or international trade policies or agreements that could result in additional tariffs, duties or other charges on commodities, components, parts or accessories that we import and/or use in our products. Although we believe that we are in substantial compliance with currently applicable laws, rules, policies, and regulations, we are unable to predict the ultimate impact of adopted or future laws, rules, policies, and regulations on our business, properties, or products. Any of these laws, rules, policies, or regulations may cause us to incur significant expenses to achieve or maintain compliance, require us to modify our products, adversely affect the price of, or demand for, some of our products, and ultimately affect the way we conduct our operations. Failure to comply with any of these laws, rules, policies, or regulations could result in harm to our reputation and/or could lead to fines and other penalties,

including restrictions on the importation of our products into, and the sale of our products in, one or more jurisdictions until compliance is achieved. In addition, our competitors may adopt strategies with respect to compliance with any such laws, rules, policies or regulations that differ significantly from our strategies. This may have the effect of changing customer preferences and our markets in ways that we did not anticipate which may adversely affect market demand for our products and, ultimately, our net sales and financial results. Other laws or regulations impacting our supply chain, such as the United Kingdom Modern Slavery Act, or data privacy requirements, such as the General Data Protection Regulation, may have similar consequences.

Changes in accounting standards, policies, or assumptions utilized in determining accounting estimates could adversely affect our financial statements, including our operating results and financial condition.

In preparing the Consolidated Financial Statements in conformity with U.S. generally accepted accounting principles ("GAAP"), we must make decisions that impact our results of operations and/or financial condition. Such decisions include the selection of the appropriate accounting principles to be applied and the assumptions on which to base accounting estimates. In reaching such decisions, we apply judgments based on our understanding and analysis of the relevant circumstances, historical experience, and actuarial and other independent external third-party specialist valuations, all as appropriate. As a result, actual amounts could differ from those estimated at the time the Consolidated Financial Statements are prepared. In addition, various authoritative accounting or regulatory entities, including the Financial Accounting Standards Board ("FASB"), Public Company Accounting Oversight Board, and the SEC may amend, expand, and/or eliminate the financial accounting or reporting standards that govern the preparation of our Consolidated Financial Statements or could reverse their previous interpretations or positions on how various financial accounting and/or reporting standards should be applied. For example, the FASB issued Accounting Standards Update ("ASU") No. 2014-09, Revenue from Contracts with Customers, and ASU No. 2016-02, Leases, that amend the accounting standards and related disclosure requirements related to revenue recognition and lease accounting, respectively. Additionally, the adoption of ASU 2016-09, Stock-based Compensation, during the first quarter of fiscal 2017 has added, and we expect that it will continue to add, variability to our provision for income taxes, mainly due to the timing of stock option exercises, vesting of restricted stock units, and the trading price of our common stock. We disclose the impact of accounting pronouncements that have been issued but not yet adopted within our annual and quarterly reports on Form 10-K and Form 10-Q, respectively. However, we do not provide an assessment of proposed accounting pronouncements, as such proposals are subject to change through the exposure process and therefore, we cannot meaningfully assess their effects on our Consolidated Financial Statements. Future changes to accounting standards could modify the accounting policies and procedures that are currently utilized in the preparation of our Consolidated Financial Statements. Such changes may be difficult to predict and implement and could materially, or otherwise, impact how we prepare and report our Consolidated Financial Statements, results of operations, and financial condition. For additional information regarding our accounting policies, accounting pronouncements adopted, and accounting pronouncements not yet adopted, refer to Part II, Item 7, "Management's Discussion and Analysis of Financial Condition and Results of Operations," of this report in the section entitled "Critical Accounting Policies and Estimates” and Note 1, Summary of Significant Accounting Policies and Related Data, of the Notes to Consolidated Financial Statements included in Part II, Item 8, “Financial Statements and Supplementary Data” of this Annual Report on Form 10-K.

Climate change legislation, regulations, or accords may adversely impact our operations.

We are currently subject to rules limiting emissions and other climate-related rules and regulations in certain jurisdictions where we operate. In addition, we may become subject to additional legislation, regulations, or accords regarding climate change, and compliance with any new rules could be difficult and costly as a result of increased energy, environmental, and other costs and capital expenditures to comply with any such legislation, regulation, or accord. Due to uncertainty in the regulatory and legislative processes and the negotiation and adoption of international climate change accords, as well as the scope of such requirements and initiatives, we cannot currently determine the effect any such legislation, regulation, or accord may have on our products and operations.

The costs of complying with the various environmental laws related to our ownership and/or lease of real property, such as clean-up costs and liabilities that may be associated with certain hazardous waste disposal activities, could adversely affect our financial condition and operating results.

Because we own and lease real property, various environmental laws may impose liability on us for the costs of cleaning up and responding to hazardous substances that may have been released on our property, including releases unknown to us. These environmental laws and regulations could also require us to pay for environmental remediation and response costs at third-party locations where we disposed of or recycled hazardous substances. We are currently involved in the evaluation and clean-up of a limited number of properties we either currently or previously owned. Although we do not expect that these current matters will have a material adverse effect on our financial position or operating results, our future costs of complying with the various environmental requirements, as they now exist or may be altered in the future, could adversely affect our financial condition and operating results.

Legislative enactments could impact the competitive landscape within our markets and affect demand for our products.

Various legislative proposals, if enacted, could put us in a competitively advantaged or disadvantaged position and affect customer demand for our products relative to the product offerings of our competitors. For example, any fiscal-stimulus or other legislative enactment that inordinately impacts the lawn and garden, outdoor power equipment, or irrigation industries generally by promoting the purchase, such as through customer rebate or other incentive programs, of certain types of mowing, snow and ice management, or irrigation equipment or other products that we sell, could impact us positively or negatively, depending on whether we manufacture products that meet the specified legislative criteria, including in areas such as fuel efficiency, alternative energy or water usage, or if, as a result of such legislation, customers perceive our product offerings to be relatively more or less attractive than our competitors' product offerings. We cannot currently predict whether any such legislation will be enacted, what any such legislation's specific terms and conditions would encompass, how any such legislation would impact the competitive landscape within our markets, or how, if at all, any such legislation might ultimately affect customer demand for our products or our operating results.

We operate in many different jurisdictions and we could be adversely affected by violations of the U.S. Foreign Corrupt Practices Act ("FCPA") and similar worldwide anti-corruption laws.

The U.S. FCPA and similar worldwide anti-corruption laws generally prohibit companies and their intermediaries from making certain improper payments for the purpose of obtaining or retaining business. The continued expansion of our international operations could increase the risk of violations of these laws in the future. Significant violations of these laws, or allegations of such violations, could harm our reputation, disrupt our business, and result in significant fines and penalties that could have a material adverse effect on our results of operations or financial condition.

We are subject to product quality issues, product liability claims, and other litigation from time to time that could adversely affect our business, reputation, operating results or financial condition.

The manufacture, sale, and use of our products expose us to significant risks associated with product quality issues and product liability claims. If a product liability claim or series of claims is brought against us for uninsured liabilities or in excess of our insurance coverage, and it is ultimately determined that we are liable, our business could suffer. While we believe that we appropriately instruct our customers on the proper usage of our products, we cannot ensure that they will implement our instructions accurately or completely. If our products are defective or used incorrectly by our customers, injury may result and this could give rise to product quality issues and/or product liability claims against us or adversely affect our brand image or reputation. Any losses that we may suffer from product quality issues and/or product liability claims, and the effect that any product quality and/or product liability litigation may have upon the reputation and marketability of our products, may have a negative impact on our business, reputation, and operating results. Product defects can occur through our own product development, design, and manufacturing processes or through our reliance on third-parties for certain component design and manufacturing activities. Some of our products or product improvements were developed relatively recently and defects or risks that we have not yet identified, such as unanticipated use of our products, may give rise to product quality issues and/or product liability claims. Additionally, we could experience a material design, testing, or manufacturing failure in our products, a quality system failure, failures in our products and other challenges that are associated with our inability to properly manage changes in the suppliers and components that we use in our products, insufficient testing procedures, other safety issues, or heightened regulatory scrutiny that could warrant a recall of some of our products. A recall of some of our products could also result in increased product liability claims. Unforeseen product quality and/or product liability problems in the development and production of new and existing products could also result in loss of market share, decreased demand, reduced sales, rework costs, and higher warranty expense.

We are also subject to other litigation from time to time that could adversely affect our business, reputation, operating results or financial condition.

If we are unable to retain our executive officers or other key employees, attract and retain other qualified personnel, or successfully implement executive officer, key employee or other personnel transitions, we may not be able to meet strategic objectives and our business could suffer.

Our ability to meet our strategic objectives and otherwise grow our business will depend to a significant extent on the continued contributions of our leadership team. Our future success will also depend in large part on our ability to identify, attract, engage, train, and retain other highly qualified personnel worldwide, including in particular managerial, functional support, technical, sales and marketing, operations, and customer service personnel. Competition for these individuals is intense, and we may not succeed in identifying, attracting, or retaining qualified personnel. The loss or interruption of the services of any of our executive officers or other key employees, the inability to identify, attract, or retain qualified personnel in the future, the inability to successfully implement executive officer, key employee or other personnel transitions, delays in hiring qualified personnel, inability to hire necessary office or production employees due to low unemployment conditions or otherwise, or any employee work slowdowns, strikes, or similar actions could make it difficult for us to conduct and manage our business and meet key objectives, which could harm our business, financial condition, and operating results.

We are dependent upon the availability of floor plan financing, including through our Red Iron financing joint venture with TCFIF or otherwise, to provide competitive

inventory financing programs to certain distributors and dealers of our products. Any material change in the availability or terms of credit offered to our customers by our floor plan arrangements, challenges or delays in transferring new distributors and dealers from any business we might acquire or otherwise to available floor plan platforms, any termination or disruption of our floor plan arrangements, or any delay in securing replacement credit sources could adversely affect our net sales and operating results.

We are a party to various floor plan arrangements, including a financing joint venture with TCFIF and TCFCFC, for the primary purpose of providing reliable, competitive floor plan financing to certain of our distributors and dealers primarily in the U.S. and Canada, as applicable, to support their businesses, as well as to improve our working capital for our other strategic purposes. As a result, we are dependent upon such arrangements for our inventory financing programs.

The availability of financing from our floor plan arrangements will be affected by many factors, including, among others, the overall credit markets, the credit worthiness of our dealers and distributors, and regulations that may affect such financing providers. Any material change in the availability or terms of credit offered to our customers by our floor plan financing providers, challenges or delays in transferring new distributors and dealers from any business we might acquire or otherwise to our available financing platforms, any termination or disruption of our floor plan arrangements, or any delay in securing replacement credit sources could adversely affect our sales and operating results.

The terms of our credit arrangements and the indentures governing our senior notes and debentures could limit our ability to conduct our business, take advantage of business opportunities and respond to changing business, market, and economic conditions. Additionally, we are subject to counterparty risk in our credit arrangements.

Our credit arrangements and the indentures governing our 3.81 percent Series A Senior Notes, 3.91 percent Series B Senior Notes, 6.625 percent senior notes, and 7.8 percent debentures include a number of financial and operating restrictions. For example, our credit arrangements contain financial covenants that, among other things, require us to maintain a minimum interest coverage ratio and a maximum leverage ratio. Our credit arrangements and/or indentures also contain provisions that restrict our ability, subject to specified exceptions, to, among other things:

  • create liens or other encumbrances on our assets;
  • dispose of assets;
  • engage in mergers or consolidations; and
  • pay dividends that are significantly higher than those currently being paid, make other distributions to our shareholders, or redeem shares of our common stock.

These provisions may limit our ability to conduct our business, take advantage of business opportunities, and respond to changing business, market, and economic conditions. In addition, they may place us at a competitive disadvantage relative to other companies that may be subject to fewer, if any, restrictions or may otherwise adversely affect our business. Transactions that we may view as important opportunities, such as significant acquisitions, may be subject to the consent of the lenders under our credit arrangements, which consent may be withheld or granted subject to conditions specified at the time that may affect the attractiveness or viability of the transaction.

Although we have in place a $600.0 million revolving credit facility that does not expire until June 2023, market deterioration or other factors could jeopardize the counterparty obligations of one or more of the banks participating in our revolving credit facility, which could have an adverse effect on our business if we are not able to replace such revolving credit facility or find other sources of liquidity on acceptable terms.

If we are unable to comply with the terms of our credit arrangements and indentures, especially the financial covenants, our credit arrangements could be terminated and our senior notes, debentures, and any amounts outstanding under our revolving credit facility could become due and payable.

We cannot assure that we will be able to comply with all of the terms of our credit arrangements, senior notes, and indentures, particularly the financial covenants. Our ability to comply with such terms depends on the success of our business and our operating results. Various risks, uncertainties, and events beyond our control could affect our ability to comply with the terms of our credit arrangements, senior notes, and/or indentures. If we were out of compliance with any covenant required by our credit arrangements following any applicable cure periods, the banks could terminate their commitments unless we could negotiate a covenant waiver. The banks could condition such waiver on amendments to the terms of our credit arrangements that may be unfavorable to us. In addition, our 3.81 percent Series A Senior Notes, 3.91 percent Series B Senior Notes, 6.625 percent senior notes, and 7.8 percent debentures, and any amounts outstanding under our revolving credit facility could become due and payable if we were unable to obtain a covenant waiver or refinance our debt under our credit arrangements. If our debt rating falls below investment grade and/or our leverage ratio rises above 1.50, the interest rate we currently pay on outstanding debt under our revolving credit facility could increase, which could adversely affect our operating results.

A downgrade in our credit ratings could increase our cost of funding and/or adversely affect our access to capital markets or the availability of funding from a variety of lenders.

Our credit ratings are important to our cost and availability of capital. The major rating agencies routinely evaluate our credit profile and assign credit ratings to us. This evaluation is based on a number of factors, which include financial strength, business and financial risk, as well as transparency with rating agencies and timeliness of financial reporting. The addition of further leverage to our capital structure could result in a downgrade to our credit ratings in the future. For instance, if our credit rating falls below investment grade and/or our leverage ratio rises above 1.50, the interest rate we currently

pay on outstanding debt under our revolving credit facility could increase. As such, failure to maintain investment grade credit ratings could adversely affect our cost of funding and our liquidity by limiting the access to capital markets or the availability of funding from a variety of lenders.

We are expanding and renovating our corporate and other facilities and could experience disruptions to our operations in connection with such efforts.

We are expanding and renovating our corporate and other facilities, primarily driven by our need to expand the capacity available for our manufacturing operations and office space. These expansion efforts include expanding and/or renovating certain of our facilities, such as our Tomah, Wisconsin manufacturing facility and Plymouth, Wisconsin warehouse. We financed, and expect to continue to finance, such efforts with cash on hand and cash from operating activities. The expansion and renovation of our corporate and other facilities entail risks that could cause disruption in the operations of our business. Such risks include potential interruption in manufacturing processes, delivery of raw materials, shipping finished goods, and data flow; unforeseen construction, scheduling, engineering, environmental, or geological problems; and unanticipated cost increases.

We may not achieve our projected financial information or other business initiatives in the time periods that we anticipate, or at all, which could have an adverse effect on our business, operating results, and financial condition.

We generally provide projected financial information, such as our expected revenue growth and net earnings per share. These financial projections are based on management’s current assumptions and expectations. The failure to achieve our financial projections could have an adverse effect on our business, operating results and financial condition.

We also set goals and objectives for the timing of certain accomplishments, initiatives and milestones regarding our business or operating results. Whether we achieve our goals and objectives of such initiatives can vary due to a number of factors, including the risk factors described in this report. As a result, there can be no assurance that we will succeed in achieving the goals and objectives of our initiatives in the time periods that we anticipate, or ever. The failure to achieve such goals and objectives in the time periods that we anticipate, or at all, could have an adverse effect on our business, operating results and financial condition.

Properties

As filed, 5,546 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Our significant facilities are listed below by location, ownership, and function as of October 31, 2019:

Location Ownership Products Manufactured / Use
Abilene, TX Leased Office, professional products, and service center
Albany, GA Owned Professional service area and office
Albis, France Leased Professional service area and office
Althengstett, Germany Owned Professional products, distribution facility, and office
Ankeny, IA Leased Professional and residential distribution center
Baraboo, WI Leased Professional and residential distribution center
Barcelona, Spain Leased Professional products warehouse and office
Beatrice, NE Owned/Leased Professional products, test facility, and office
Beijing, China Leased Professional products manufacturing, distribution facility, and office
Beverley, Australia Owned Professional products, distribution facility, service area, and office
Bloomington, MN Owned/Leased Corporate headquarters, warehouse, and test facility
Boulder, CO Leased Professional office
Braeside, Australia Leased Distribution facility, service area, and office
Branchburg, NJ Owned Distribution facility, service area, and office
Brooklyn Center, MN Leased Distribution facility, service area, and office
Capena, Italy Leased Distribution center
Corpus Christi, TX Owned Professional service area and office
El Cajon, CA Owned/Leased Professional products, distribution facility, test site, and office
El Paso, TX Owned/Leased Residential component parts and professional products manufacturing, and distribution facility
Fiano Romano, Italy Owned/Leased Professional products, distribution facility, and office
Forest Park, GA Leased Professional service area and office
Fresno, CA Leased Professional products warehouse
Grandville, MI Leased Professional service area and office
Harlingen, TX Leased Professional service area and office
Hertfordshire, United Kingdom Owned Professional and residential products, distribution facility, test lab, and office
Howell, MI Owned Professional service area and office
Iron Mountain, MI Owned/Leased Professional products, distribution facility, and office
Juarez, Mexico Leased Professional and residential products and warehouse
Lake Mills, WI Owned Professional products manufacturing and distribution facility and office
Oevel, Belgium Owned Distribution center, service area, and office
Perry, OK Owned/Leased Professional products, test facility, warehouse, distribution facility, and office
Petaluma, CA Leased Professional products manufacturing and distribution facility, service area, and office
Ploiesti, Romania Owned Professional products, distribution facility, test facility, and office
Plymouth, WI Owned Professional and residential parts distribution center
Pune, India Leased Corporate service center
Riverside, CA Owned/Leased Professional products, test facility, distribution facility, and office
Ronkonkoma, NY Owned Distribution facility, service area, and office
Sanford, FL Leased Professional products and distribution center
Savannah, GA Leased Professional service area and office
Shakopee, MN Owned Components for professional and residential products
St. Louis, MO Leased Distribution facility, service area, and office
Sterling, KY Leased Professional products manufacturing and distribution facility, service area, and office
Tomah, WI Owned/Leased Professional products and distribution center
Traverse City, MI Leased Professional and warehouse
Ustron, Poland Owned Professional products, distribution facility, and office
Weatherford, TX Owned Professional products manufacturing and distribution facility and office
West Salem, OH Owned Professional products manufacturing and distribution facility and office
Windom, MN Owned/Leased Residential and professional products and warehouses
Xiamen City, China Leased Professional and residential products and related components, distribution facility, and office

As of October 31, 2019, we utilize manufacturing, distribution, warehouse, and office facilities totaling approximately 8.3 million square feet of space worldwide, compared to 6.5 million square feet of space worldwide as of October 31, 2018. The increase in utilized square feet of space from October 31, 2018 to October 31, 2019 is primarily due to the acquisition of CMW. For additional information regarding our acquisition of CMW, refer to Note 2 , Business Combinations, in the Notes to Consolidated Financial Statements included in Part II, Item 8, "Financial Statements and Supplementary Data" of this Annual Report on Form 10-K.

Plant utilization varies during the year depending on the production cycle. We consider each of our current facilities to be in good operating condition and management believes we have sufficient manufacturing capacity for production in fiscal 2020, although efforts for the expansion and renovation of certain facilities for future operational growth are underway as of October 31, 2019. These expansion and renovation efforts include expanding and renovating certain of our facilities, such as our Tomah, Wisconsin manufacturing facility and Plymouth, Wisconsin warehouse.

As filed, 1,730 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

We are a party to litigation in the ordinary course of business. Litigation occasionally involves claims for punitive, as well as compensatory, damages arising out of the use of our products. Although we are self-insured to some extent, we maintain insurance against certain product liability losses. We are also subject to litigation and administrative and judicial proceedings with respect to claims involving asbestos and the discharge of hazardous substances into the environment. Some of these claims assert damages and liability for personal injury, remedial investigations or clean-up, and other costs and damages. We are also typically involved in commercial disputes, employment disputes, and patent litigation cases in the ordinary course of business. To prevent possible infringement of our patents by others, we periodically review competitors' products. To avoid potential liability with respect to others' patents, we regularly review certain patents issued by the United States Patent and Trademark Office and foreign patent offices. We believe these activities help us minimize our risk of being a defendant in patent infringement litigation. We are currently involved in patent litigation cases, including cases by or against competitors, where we are asserting and defending against claims of patent infringement. Such cases are at varying stages in the litigation process. For a description of our material legal proceedings, see Note 12, Commitments and Contingent Liabilities of the Notes to Consolidated Financial Statements, in the section entitled "Litigation" included in Part II, Item 8, "Financial Statements and Supplementary Data" of this report, which is incorporated into this Item 3 by reference.

Management's discussion and analysis

As filed, 100,162 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

This Management's Discussion and Analysis of Financial Condition and Results of Operations ("MD&A") is intended to provide a reader of our financial statements with a narrative from the perspective of management on our financial condition, results of operations, liquidity, and certain other factors that may affect our future results. Unless expressly stated otherwise, the comparisons presented in this MD&A refer to the year-over-year comparison of changes in our financial condition and results of operations as of and for the fiscal years ended October 31, 2019 and October 31, 2018. Discussion of fiscal 2017 items and the year-over-year comparison of changes in our financial condition and results of operation as of and for the fiscal years ended October 31, 2018 and October 31, 2017 can be found in Part II, Item 7. "Management’s Discussion and Analysis of Financial Condition and Results of Operations" of our Annual Report on Form 10-K for the fiscal year ended October 31, 2018.

Our MD&A is presented as follows:

  • Company Overview
  • Results of Operations
  • Business Segments
  • Financial Position
  • Non-GAAP Financial Measures
  • Critical Accounting Policies and Estimates

We have provided non-GAAP financial measures, which are not calculated or presented in accordance with accounting principles generally accepted in the United States ("GAAP"), as information supplemental and in addition to the most directly comparable financial measures presented in this report that are calculated and presented in accordance with GAAP. We use these non-GAAP financial measures in making operating decisions because we believe these non-GAAP financial measures provide meaningful supplemental information regarding our core operational performance and provide us with a better understanding of how to allocate resources to both ongoing and prospective business initiatives. Additionally, these non-GAAP financial measures facilitate our internal comparisons to both our historical operating results and to our competitors' operating results by factoring out potential differences caused by charges not related to our regular, ongoing business, including, without limitation, non-cash charges, certain large and unpredictable charges, acquisitions and dispositions, legal settlements, and tax positions. Further, we believe that such non-GAAP financial measures, when considered in conjunction with our Consolidated Financial Statements prepared in accordance with U.S. GAAP, provide investors with useful supplemental financial information to better understand our core operational performance.

Reconciliations of adjusted non-GAAP financial measures to the most directly comparable reported GAAP financial measures are included in the section titled "Non-GAAP Financial Measures" within this MD&A. These non-GAAP financial measures, however, should not be considered superior

to, as a substitute for, or as an alternative to, and should be considered in conjunction with, the most directly comparable GAAP financial measures. Further, these non-GAAP financial measures may differ from similar measures used by other companies.

Statements that are not historical are forward-looking and involve risks and uncertainties, including those discussed in Part I, Item 1A, "Risk Factors" and elsewhere in this report. These risks could cause our actual results to differ materially from any future performance suggested throughout this MD&A.

COMPANY OVERVIEW

The Toro Company is in the business of designing, manufacturing, and marketing professional turf maintenance equipment and services; turf irrigation systems; landscaping equipment and lighting products; snow and ice management products; agricultural irrigation systems; rental, specialty, and underground construction equipment; and residential yard and snow thrower products. We sell our products worldwide through a network of distributors, dealers, mass retailers, hardware retailers, equipment rental centers, home centers, as well as online (direct to end-users). We strive to provide innovative, well-built, and dependable products supported by an extensive service network. A significant portion of our net sales has historically been, and we expect will continue to be, attributable to new and enhanced products. We define new products as those introduced in the current and previous two fiscal years.

We classify our operations into two reportable business segments: Professional and Residential. Our remaining activities are presented as "Other" due to their insignificance. Such Other activities consist of earnings (loss) from our wholly-owned domestic distribution companies, corporate activities, and the elimination of intersegment revenues and expenses.

Acquisition of CMW

As more fully described in Part I, Item 1, "Business" within the section titled "Acquisition of The Charles Machine Works, Inc." and Note 2, Business Combinations, in the Notes to Consolidated Financial Statements included in Part II, Item 8, "Financial Statements and Supplementary Data," on April 1, 2019, we completed our acquisition of CMW, a privately held Oklahoma corporation. CMW designs, manufactures, and markets a range of professional products to serve the underground construction market, including horizontal directional drills, walk and ride trenchers, compact utility loaders/skid steers, vacuum excavators, asset locators, pipe rehabilitation solutions, and after-market tools. CMW provides innovative product offerings that broadened and strengthened our Professional segment product portfolio and expanded our dealer network, while also providing a complementary geographic manufacturing footprint. The transaction was structured as a merger, pursuant to which a wholly-owned subsidiary of Toro merged with and into CMW, with CMW continuing as the surviving entity and a wholly-owned subsidiary of Toro. As a result of the merger, all of the outstanding equity securities of CMW were canceled and now only represent the right to receive the applicable consideration as described in the merger agreement. At the closing date, we paid preliminary merger consideration of $679.3 million that was subject to customary adjustments based on, among other things, the amount of actual cash, debt, and working capital in the business of CMW at the closing date. During the fourth quarter of fiscal 2019, we finalized such customary adjustments that resulted in an additional $5.7 million of merger consideration being paid and an aggregate merger consideration of $685.0 million ("purchase price"). We funded the purchase price for the acquisition by using a combination of cash proceeds from the issuance of borrowings under our unsecured senior term loan credit agreement and borrowings from our unsecured senior revolving credit facility. For additional information regarding the financing agreements utilized to fund the aggregate merger consideration, refer to the section titled "Financial Position" within this MD&A and Note 6, Indebtedness, in the Notes to Consolidated Financial Statements included in Part II, Item 8, "Financial Statements and Supplementary Data" of this Annual Report on Form 10-K.

Summary of Fiscal 2019 Results

Our fiscal 2019 results included the following items of significance:

  • Net sales for fiscal 2019 increased by 19.8 percent to $3,138.1 million when compared to fiscal 2018. The sales increase was primarily driven by incremental sales as a result of our acquisition of CMW, the year-over-year impact of price increases across our Professional and Residential segment product lines, strong channel demand for our Professional segment snow and ice management products and Residential snow thrower products, incremental sales as a result of our acquisition of a Northeastern U.S. distribution company, as well as the successful introduction of innovative new products in the Professional and Residential segments.
  • Professional segment net sales grew 25.5 percent in fiscal 2019 compared to fiscal 2018.
  • Residential segment net sales increased 1.0 percent in fiscal 2019 compared to fiscal 2018.
  • International net sales for fiscal 2019 increased by 12.7 percent compared to fiscal 2018, primarily driven by incremental sales as a result of our acquisition of CMW. Foreign currency exchange rates unfavorably impacted our international net sales by approximately $14.1 million in fiscal 2019. International net sales comprised 23.1 percent of our total consolidated net sales in fiscal 2019 compared to 24.6 percent and 24.4 percent in fiscal 2018 and 2017, respectively.
  • Gross margin was 33.4 percent in fiscal 2019, a decrease of 250 basis points from 35.9 percent in fiscal 2018. Non-GAAP adjusted gross margin was 35.1 percent in fiscal 2019, a decrease of 80 basis points from 35.9 percent in fiscal 2018.
  • Selling, general, and administrative ("SG&A") expense was 23.0 percent as a percentage of net sales in fiscal 2019,

an increase of 130 basis points from 21.7 percent in fiscal 2018.

  • Fiscal 2019 net earnings of $274.0 million increased 0.8 percent compared to fiscal 2018, and diluted net earnings per share increased 1.2 percent to $2.53 in fiscal 2019 compared to $2.50 in fiscal 2018. Fiscal 2019 non-GAAP adjusted net earnings were $324.3 million, an increase of 11.8 percent compared to fiscal 2018, and non-GAAP adjusted diluted net earnings per share increased 12.4 percent to $3.00 in fiscal 2019 compared to $2.67 in fiscal 2018.
  • Our receivables and inventories increased by 39.1 percent and 81.9 percent, respectively, as of the end of fiscal 2019 compared to the end of fiscal 2018, primarily due to incremental receivables and inventories as a result of our acquisition of CMW.
  • Our field inventory levels were up as of the end of fiscal 2019 compared to the end of fiscal 2018, primarily as a result of higher Professional segment field inventory that was primarily due to incremental field inventory as a result of our acquisition of CMW and higher field inventory for our Professional segment zero-turn riding mowers due to soft retail demand.
  • We continued our history of paying quarterly cash dividends in fiscal 2019. We increased our fiscal 2019 quarterly cash dividend by 12.5 percent to $0.225 per share compared to our quarterly cash dividend in fiscal 2018 of $0.20 per share.

Please refer to the sections entitled “Results of Operations", "Business Segments", and "Financial Position" within this MD&A for more specific disclosures regarding the above items of significance and additional details concerning our financial condition, results of operations, and liquidity for fiscal 2019. Additionally, please refer to the section titled "Non-GAAP Financial Measures" within this MD&A for reconciliations of adjusted non-GAAP financial measures to the most directly comparable reported GAAP financial measures.

Vision 2020

Our current multi-year employee initiative, "Vision 2020", which began with our 2018 fiscal year, focuses on driving profitable growth with an emphasis on innovation and serving our customers, which we believe will generate further momentum for the organization. Through the first two fiscal years of our Vision 2020 initiative, we set specific financial goals, which included organic revenue and operating earnings growth. In fiscal year 2019, we fell short of our organic revenue growth and our operating earnings as a percentage of net sales goals by achieving 1.1 percent organic revenue growth and 10.4 percent of operating earnings as a percentage of net sales, respectively.

With our transformational acquisition of CMW, we will complete the third and final fiscal year of our Vision 2020 initiative with a revised enterprise-wide performance goal of adjusted operating earnings of $485.0 million, which is intended to help us drive profitable growth as a combined enterprise.

RESULTS OF OPERATIONS

Overview

The following table summarizes our results of operations as a percentage of our consolidated net sales:

Fiscal Years Ended October 31 2019 2018 2017
Net sales 100.0% 100.0% 100.0%
Cost of sales (66.6) (64.1) (63.2)
Gross margin 33.4 35.9 36.8
SG&A expense (23.0) (21.7) (22.6)
Operating earnings 10.4 14.2 14.2
Interest expense (0.9) (0.7) (0.8)
Other income, net 0.8 0.7 0.7
Provision for income taxes (1.6) (3.8) (3.4)
Net earnings 8.7% 10.4% 10.7%

Net Sales

Worldwide net sales in fiscal 2019 were $3,138.1 million compared to $2,618.7 million in fiscal 2018, an increase of 19.8 percent. This net sales increase was primarily attributable to the following factors:

  • Increased worldwide sales of Professional segment products, which were primarily driven by incremental sales as a result of our acquisition of CMW, the year-over-year impact of price increases across our Professional segment product lines, and strong channel demand for our snow and ice management, landscape contractor, and Toro-branded rental and specialty construction equipment, partially offset by fewer shipments of our irrigation products due to unfavorable weather in key regions.
  • Increased sales for our Other activities were primarily due to increased shipments of our golf and grounds equipment through our wholly-owned domestic distribution companies driven by our acquisition of a Northeastern U.S. distribution company.
  • Increased worldwide sales of Residential segment products were primarily due to the year-over-year impact of price increases across our Residential segment product lines, strong retail demand for snow throwers, the successful introduction of new products, and increased parts sales, partially offset by soft retail demand for zero-turn riding mowers and reduced sales of our Pope-branded irrigation products by unfavorable weather conditions.

Net sales in international markets increased by 12.7 percent in fiscal 2019 compared to fiscal 2018. This net sales increase was primarily attributable to the following factors:

  • incremental sales as a result of our acquisition of CMW,
  • strong channel demand for our golf and grounds equipment, and
  • strong retail demand for Residential snow thrower products.

These international net sales increases were partially offset by the following factors:

  • decreased sales of Residential and Professional segment zero-turn riding mowers due to soft retail demand,
  • lower sales of Pope-branded products due to unfavorable weather in key regions, and
  • changes in foreign currency exchange rates unfavorably impacted our international net sales by approximately $14.1 million in fiscal 2019.

Gross Margin

Gross margin represents gross profit (net sales less cost of sales) as a percentage of net sales. See Note 1, Summary of Significant Accounting Policies and Related Data, of the Notes to Consolidated Financial Statements, in the section entitled "Cost of Sales," included in Part II, Item 8, "Financial Statements and Supplementary Data" of this Annual Report on Form 10-K for a description of expenses included in cost of sales. Gross margin decreased by 250 basis points to 33.4 percent in fiscal 2019 from 35.9 percent in fiscal 2018. This decrease was mainly the result of the following factors:

  • the unfavorable impact of higher commodity and tariff costs on purchased raw materials and component parts,
  • the impact of purchase accounting adjustments related to our acquisition of CMW,
  • unfavorable product mix,
  • charges related to the Toro underground wind down, and
  • supply chain challenges and inclement weather resulting in manufacturing inefficiencies within our Professional segment.

Somewhat offsetting those unfavorable gross margin factors were:

  • improved net price realization driven by price increases across our product lines,
  • productivity initiatives related to commodities, components, parts, and accessories sourcing, and
  • lower freight costs due to cost reduction initiatives.

Adjusted non-GAAP gross margin decreased 80 basis points to 35.1 percent in fiscal 2019 from 35.9 percent in fiscal 2018. This decrease was mainly the result of the following factors:

  • the unfavorable impact of higher commodity and tariff costs on purchased raw materials and component parts,
  • unfavorable product mix, and
  • supply chain challenges and inclement weather resulting in manufacturing inefficiencies within our Professional segment.

Somewhat offsetting those unfavorable adjusted non-GAAP gross margin factors were:

  • improved net price realization driven by price increases across our product lines,
  • productivity initiatives related to commodities, components, parts, and accessories sourcing, and
  • lower freight costs due to cost reduction initiatives.

Adjusted non-GAAP gross margin excludes the impact of certain purchase accounting adjustments resulting from our acquisition of CMW, including charges incurred for the take-down of the inventory fair value step-up amount and amortization of the backlog intangible asset, as well as the impact of management actions, including the charges incurred for inventory write-downs, anticipated inventory retail support activities, and accelerated depreciation of fixed assets related to the Toro underground wind down and restructuring charges incurred for our corporate restructuring event. Please refer to the section titled "Non-GAAP Financial Measures" within this MD&A for reconciliations of adjusted non-GAAP financial measures to the most directly comparable reported GAAP financial measures.

Selling, General and Administrative Expense

SG&A expense increased $155.0 million, or 27.3 percent, in fiscal 2019 compared to fiscal 2018. See Note 1, Summary of Significant Accounting Policies and Related Data, of the Notes to Consolidated Financial Statements, in the section entitled "Selling, General, and Administrative Expense," included in Part II, Item 8, "Financial Statements and Supplementary Data" of this report for a description of expenses included in SG&A expense. SG&A expense rate represents SG&A expense as a percentage of net sales. The SG&A expense rate in fiscal 2019 was 23.0 percent compared to 21.7 percent in fiscal 2018, an unfavorable increase of 130 basis points. As a percentage of net sales, our SG&A expense rate increase was primarily due to the following factors:

  • the acquisition of CMW, which resulted in incremental administrative, indirect sales and marketing, engineering, warranty, and service expense; integration and acquisition-related expenditures, and higher amortization of other intangible assets;
  • increased warranty costs in certain of our legacy businesses; and
  • increased engineering expense for new product development in our legacy businesses.

These unfavorable SG&A expense rate factors were partially offset by decreased direct marketing expense in our legacy businesses.

Interest Expense

Interest expense for fiscal 2019 increased $9.7 million, or 51.0 percent, compared to fiscal 2018. This increase was driven by interest expense incurred on higher outstanding borrowings incurred to fund the purchase price for our acquisition of CMW.

Other Income, Net

Other income, net consists mainly of our proportionate share of income or losses from our Red Iron joint venture, realized currency exchange rate gains and losses, litigation settlements and/or recoveries, interest income, dividend income, gains or losses recognized on actuarial valuation changes for our pension and post-retirement plans, retail financing revenue, and other miscellaneous income. Refer to Note 16, Other Income, Net, of the Notes to Consolidated Financial Statements,

included in Part II, Item 8, "Financial Statements and Supplementary Data" of this Annual Report on Form 10-K for additional information regarding the components of other income, net.

Other income, net for fiscal 2019 was $25.9 million compared to $18.4 million in fiscal 2018, an increase of $7.5 million. The increase in other income, net was primarily due to the following factors:

  • realized gain on actuarial valuation changes for our pension and post-retirement plans of $6.8 million and
  • higher earnings from our equity investment in Red Iron of $0.8 million.

These increases were partially offset by the following factors:

  • increased legal expense, net of litigation recoveries, of $1.0 million and
  • the loss on the sale of a used underground construction equipment business of $0.9 million.

Provision for Income Taxes

The effective tax rate for fiscal 2019 was 14.9 percent compared to 27.0 percent in fiscal 2018. The effective tax rate was significantly impacted by the enactment of the Tax Act during fiscal 2018, including the remeasurement of deferred tax assets and liabilities, which resulted in a non-cash discrete tax charge of $19.3 million, and the calculation of the deemed repatriation tax, which resulted in a discrete tax charge of $13.4 million, payable over eight years. In addition to these one-time charges resulting from the Tax Act, the decrease in the effective tax rate was partially driven by the reduction in the U.S. federal corporate tax rate from a blended rate of 23.3 percent in fiscal 2018 to a rate of 21.0 percent in fiscal 2019. See Note 8, Income Taxes, of the Notes to Consolidated Financial Statements, included in Part II, Item 8, "Financial Statements and Supplementary Data" of this report for further discussion the impacts on US Tax Reform.

The adjusted non-GAAP effective tax rate for fiscal 2019 was 19.3 percent, compared to an adjusted non-GAAP effective tax rate of 22.1 percent in fiscal 2018. The decrease in the adjusted non-GAAP effective tax rate was primarily driven by the reduction in the U.S. federal corporate tax rate from a blended rate of 23.3 percent in fiscal 2018 to a rate of 21.0 percent in fiscal 2019.

The adjusted non-GAAP effective tax rate excludes costs incurred related to our acquisition of CMW, including integration and transaction costs and certain purchase accounting adjustments; the impact of management actions, including the charges related to the Toro underground wind down, our corporate restructuring event, and the divestiture of a used underground construction equipment business; the tax benefit for the excess tax deduction for share-based compensation; and one-time charges incurred under the Tax Act. Please refer to the section titled "Non-GAAP Financial Measures" within this MD&A for reconciliations of adjusted non-GAAP financial measures to the most directly comparable reported GAAP financial measures.

Net Earnings

Fiscal 2019 net earnings were $274.0 million compared to $271.9 million in fiscal 2018, an increase of 0.8 percent. Fiscal 2019 diluted net earnings per share were $2.53, an increase of 1.2 percent from $2.50 per diluted share in fiscal 2018. The net earnings increase for fiscal 2019 was primarily due to the following factors:

  • the significant impact of the one-time charges as a result of the Tax Act on our fiscal 2018 net earnings,
  • incremental earnings as a result of our acquisition of CMW,
  • improved net price realization driven by price increases across our product lines,
  • the reduction in the U.S federal corporate tax rate from a blended rate of 23.3 percent in fiscal 2018 to a rate of 21.0 percent in fiscal 2019,
  • productivity initiatives related to commodities and component parts sourcing, and
  • the realized gain on actuarial valuation changes for our pension and post-retirement plans.

These increases to net earnings were partially offset by the following factors:

  • the unfavorable impact of purchase accounting adjustments and integration and acquisition-related expenditures from our CMW acquisition,
  • higher commodity and tariff costs on purchased raw materials and component parts,
  • unfavorable product mix,
  • charges related to the Toro underground wind down,
  • higher interest expense incurred on outstanding indebtedness, and
  • charges related to our corporate restructuring event.

Non-GAAP adjusted net earnings for fiscal 2019 were $324.3 million, or $3.00 per diluted share, compared to $290.1 million, or $2.67 per diluted share, in fiscal 2018, an increase of 12.4 percent per diluted share. The non-GAAP adjusted net earnings increase for fiscal 2019 was primarily due to the following factors:

  • incremental earnings as a result of our acquisition of CMW,
  • improved net price realization driven by price increases across our product lines,
  • the reduction in the U.S federal corporate tax rate from blended rate of 23.3 percent in fiscal 2018 to a rate of 21.0 percent in fiscal 2019,
  • productivity initiatives related to commodities and component parts sourcing, and
  • the realized gain on actuarial valuation changes for our pension and post-retirement plans.

These increases to adjusted non-GAAP net earnings were partially offset by the following factors:

  • higher commodity and tariff costs on purchased raw materials and component parts,
  • unfavorable product mix, and
  • higher interest expense incurred on outstanding indebtedness.

Adjusted net earnings excludes costs incurred related to our acquisition of CMW, including integration and transaction costs and certain purchase accounting adjustments; the impact of management actions, including the charges related to the Toro underground wind down, our corporate restructuring event, and the divestiture of a used underground construction equipment business; the tax benefit for the excess tax deduction for share-based compensation; and one-time charges incurred under the Tax Act. Please refer to the section titled "Non-GAAP Financial Measures" within this MD&A for reconciliations of adjusted non-GAAP financial measures to the most directly comparable reported GAAP financial measures.

Commodity Cost Changes

Commodities, components, parts, and accessories purchased for use in our manufacturing process and end-products or to be sold as standalone end-products are subject to the effects of inflation, deflation, changing prices, tariffs, and/or duties. During fiscal 2019, the average cost of commodities, components, parts, and accessories purchased, including the impact of inflation and tariff costs, were higher compared to the average cost of commodities, components, parts, and accessories purchased in fiscal 2018. The increase in the average cost of commodities, components, parts, and accessories had an unfavorable impact on our gross margins during fiscal 2019 as compared to fiscal 2018.

We strategically work to mitigate any unfavorable impact as a result of changes in the cost of commodities, components, parts, and accessories that affect our product lines; as a result, we anticipate the costs associated with commodity, components, parts, and accessories in fiscal 2020 to be slightly lower than the average cost of commodities, components, parts, and accessories purchased during fiscal 2019. Historically, we have mitigated, and we currently expect that we would mitigate, any commodity, components, parts, and accessories cost increases, in part, by collaborating with suppliers, reviewing alternative sourcing options, substituting materials, utilizing Lean methods, engaging in internal cost reduction efforts, utilizing tariff exclusions and duty drawback mechanisms, and increasing prices on some of our products, all as appropriate. Further information regarding commodity cost risk is presented in Part II, Item 7A, "Quantitative and Qualitative Disclosures About Market Risk," of this Annual Report on Form 10-K in the section entitled "Commodity Cost Risk".

BUSINESS SEGMENTS

As more fully described in Note 3, Segment Data, of the Notes to Consolidated Financial Statements included within Part II, Item 8, "Financial Statements and Supplementary Data" of this Annual Report on Form 10-K, we operate in two reportable business segments: Professional and Residential. Segment earnings for our Professional and Residential segments are defined as earnings from operations plus other income, net. Our remaining activities are presented as "Other" due to their insignificance. Operating loss for our Other activities includes earnings (loss) from our wholly-owned domestic distribution companies, corporate activities, other income, and interest expense. Corporate activities include general corporate expenditures (finance, human resources, legal, information services, public relations, business development, and similar activities) and other unallocated corporate assets and liabilities, such as corporate facilities and deferred tax assets and liabilities. The following information provides perspective on our reportable business segments' and Other activities net sales and operating results.

Professional Segment

Professional segment net sales represented approximately 77.9 percent of consolidated net sales for fiscal 2019, 74.4 percent for fiscal 2018, and 72.3 percent for fiscal 2017. The following table presents our Professional segment's net sales, operating earnings, and operating earnings as a percent of net sales:

(Dollars in millions)

Fiscal Years Ended October 31 2019 2018 2017
Net sales $2,443.4 $1,947.0 $1,811.7
% change from prior year 25.5% 7.5% 6.2%
Operating earnings $380.9 $399.8 $379.5
As a percent of net sales 15.6% 20.5% 20.9%

Segment Net Sales

Worldwide net sales for the Professional segment in fiscal 2019 were up by 25.5 percent compared to fiscal 2018 primarily as a result of the following factors:

  • incremental sales as a result of our acquisition of CMW;
  • the year-over-year impact of price increases across our Professional segment product lines;
  • higher shipments of our snow and ice management products due to strong channel and retail demand driven by late snowfalls in key regions during the Spring of 2019, as well as strong sales of the redesigned stand-on Snowrator;
  • continued growth in our landscape contractor business driven by the successful introduction of the new eXmark-branded Staris stand-on zero-turn riding mower, incremental sales of lawn solution products as a result of our acquisition of L.T. Rich Products, Inc. ("L.T. Rich"), higher parts sales, and strong channel demand for walk-behind and walk-power mowers; and
  • increased shipments of our rental and specialty construction equipment due to the successful new product

introduction of our Dingo TXL 2000 compact utility loader and continued channel demand for our line of Dingo compact utility loaders.

Somewhat offsetting those increases were fewer shipments of our irrigation products primarily due to unfavorable weather in key regions resulting in soft retail demand.

Segment Earnings

Operating earnings for the Professional segment in fiscal 2019 decreased 4.7 percent compared to fiscal 2018. Expressed as a percentage of Professional segment net sales, Professional segment operating earnings decreased by 490 basis points to 15.6 percent in fiscal 2019 compared to 20.5 percent in fiscal 2018. The following factors unfavorably impacted Professional segment operating earnings as a percentage of Professional segment net sales for fiscal 2019:

  • our acquisition of CMW resulting in charges incurred for purchase accounting adjustments and acquisition-related and integration expenditures; incremental administrative, indirect sales and marketing, engineering, warranty, and service expense; and higher amortization of other intangible assets;
  • the unfavorable impact of higher commodity and tariff costs on purchased raw materials and component parts;
  • supply chain challenges and inclement weather resulting in manufacturing inefficiencies;
  • charges related to the Toro underground wind down;
  • unfavorable product mix;
  • increased warranty costs in certain of our legacy businesses; and
  • increased engineering expense for new product development.

Somewhat offsetting these unfavorable factors were the following items:

  • improved net price realization driven by pricing increases across our Professional segment product lines,
  • productivity initiatives related to commodities and component parts sourcing,
  • lower freight costs due to cost reduction initiatives, and
  • decreased direct marketing expense in our legacy businesses.

Residential Segment

Residential segment net sales represented approximately 21.1 percent of consolidated net sales for fiscal 2019, 24.9 percent for fiscal 2018, and 26.9 percent for fiscal 2017. The following table presents our Residential segment's net sales, operating earnings, and operating earnings as a percent of net sales:

(Dollars in millions)

Fiscal Years Ended October 31 2019 2018 2017
Net sales $661.3 $654.4 $673.2
% change from prior year 1.0% (2.8)% 0.6%
Operating earnings $65.2 $64.8 $74.7
As a percent of net sales 9.9% 9.9% 11.1%

37

Segment Net Sales

Worldwide net sales for the Residential segment in fiscal 2019 were up by 1.0 percent compared to fiscal 2018 primarily as a result of the following factors:

  • the year-over-year impact of price increases across our Residential segment product lines,
  • strong retail demand for our snow throwers, including the successful introduction of our line of 60V lithium-ion powered single-stage snow thrower products,
  • higher shipments of walk power mowers driven by the launch of our 60V lithium-ion powered walk power mowers, and
  • increased parts sales driven by channel demand.

Somewhat offsetting those increases were the following factors:

  • fewer shipments of zero-turn riding mowers driven by soft retail demand and
  • reduced sales of our Pope-branded irrigation products driven by unfavorable weather conditions in key regions.

Segment Earnings

Operating earnings for the Residential segment in fiscal 2019 increased 0.5 percent compared to fiscal 2018. Expressed as a percentage of Residential segment net sales, Residential segment operating earnings were flat as a percent of sales at 9.9 percent in both fiscal 2019 and fiscal 2018. The following factors positively impacted Residential segment operating earnings as a percentage of Residential segment net sales for fiscal 2019:

  • improved net price realization as a result of pricing increases across our Residential segment product lines,
  • favorable manufacturing variance, and
  • lower direct marketing costs.

Offsetting these positive factors were the following items:

  • the unfavorable impact of higher commodity and tariff costs on purchased raw materials and component parts,
  • unfavorable product mix,
  • increased warranty cost, and
  • higher engineering expense for new product development.

Other Activities

Net sales for our Other activities, which includes sales from our wholly-owned domestic distribution companies less sales from our Professional and Residential business segments to the wholly-owned domestic distribution companies, represented approximately 1.0 percent of consolidated net sales for fiscal 2019, 0.7 percent for fiscal 2018, and 0.8 percent for fiscal 2017. The following table presents net sales and operating losses for our Other activities:

(Dollars in millions)

Fiscal Years Ended October 31 2019 2018 2017
Net sales $33.4 $17.2 $20.2
% change from prior year 93.5% (14.8)% 14.1%
Operating losses $(123.9) $(92.2) $(101.0)

Other Net Sales

Net sales for our Other activities in fiscal 2019 increased approximately $16.1 million compared to fiscal 2018, primarily due to increased sales of our golf and grounds equipment through our wholly-owned domestic distribution companies driven by our acquisition of a Northeastern U.S. distribution company.

Other Operating Loss

Operating loss for our Other activities in fiscal 2019 increased by $31.7 million, or 34.4 percent, compared to fiscal 2018. This loss increase was primarily attributable to costs incurred for continued CMW integration efforts, higher interest expense incurred on outstanding indebtedness, charges incurred for our corporate restructuring event, higher incentive compensation expense, and increased legal expense, net of litigation recoveries. The increase in loss was partially offset by the realized gain on actuarial valuation changes for our pension and post-retirement plans and higher Red Iron income.

FINANCIAL POSITION

Working Capital

Our strategy for fiscal 2019 continued to place emphasis on improving asset utilization with a focus on reducing the amount of working capital in the supply chain, adjusting production plans, and maintaining or improving order replenishment and service levels to end-users. We calculate our average net working capital as average net accounts receivable plus average net inventory, less average accounts payable as a percentage of net sales for a twelve month period. As of the end of fiscal 2019, our average net working capital was 16.3 percent compared to 13.7 percent as of the end of fiscal 2018. This capital increase was mainly due to a higher average net inventory and net accounts receivable than the corresponding increase to average net accounts payable as a percentage of net sales due to our acquisition of CMW, as well as higher net inventory balances in our legacy businesses due to lower than forecasted sales in our Professional segment driven by soft retail demand and build-ahead for fiscal 2020 new product introductions in our Residential segment.

The following table highlights several key measures of our working capital performance:

(Dollars in millions)

Fiscal Years Ended October 31 2019 2018
Average cash and cash equivalents $180.0 $237.6
Average receivables, net $265.4 $214.7
Average inventories, net $560.5 $404.5
Average accounts payable $315.5 $259.3
Average days outstanding for receivables 30.9 29.9
Average inventory turnover (times) 3.7 4.2

38

The following factors impacted our working capital during fiscal 2019:

  • Average net receivables increased by 23.6 percent in fiscal 2019 compared to fiscal 2018, primarily due to incremental net receivables as a result of our acquisition of CMW. Our average days outstanding for receivables increased to 30.9 days in fiscal 2019 compared to 29.9 days in fiscal 2018.
  • Average net inventories increased by 38.6 percent in fiscal 2019 compared to fiscal 2018. Inventory levels as of the end of fiscal 2019 compared to the end of fiscal 2018 were up by $293.4 million, or 81.9 percent, primarily due to incremental net inventory as a result of our acquisition of CMW, as well as higher net inventory balances in our legacy businesses due to lower than forecasted sales in our Professional segment driven by soft retail demand and build-ahead for fiscal 2020 new product introductions in our Residential segment.
  • Average accounts payable increased by 21.7 percent in fiscal 2019 compared to fiscal 2018, mainly due to incremental accounts payable as a result of our acquisition of CMW and negotiating more favorable payment terms with suppliers as a component of our working capital initiatives.

Cash Flow

Cash flows provided by/(used in) operating, investing, and financing activities during the past three fiscal years are shown in the following table:

(Dollars in millions)

Fiscal Years Ended October 31 Cash Provided by/(Used in) 2019 2018 2017
Operating activities $337.4 $364.8 $360.7
Investing activities (772.9) (127.9) (83.8)
Financing activities 299.5 (252.1) (245.3)
Effect of exchange rates on cash (1.2) (5.9) 5.0
Net increase/(decrease) in cash and cash equivalents (137.3) (21.1) 36.7
Cash and cash equivalents as of fiscal year end $151.8 $289.1 $310.3

Cash Flows from Operating Activities

Our primary source of funds is cash generated from operations. In fiscal 2019, cash provided by operating activities decreased by $27.4 million, or 7.5 percent, from fiscal 2018. This decrease was mainly driven by more cash utilized for purchases of inventory and a lower year-over-year cash source benefit from extending payment terms with vendors as a component of our working capital initiatives. Somewhat offsetting this decrease was higher net earnings, which includes the unfavorable non-cash take-down of the CMW inventory purchase accounting step-up amount, and lower cash utilized for prepaid taxes.

Cash Flows from Investing Activities

Capital expenditures and acquisitions are a significant use of our capital resources. These investments are intended to enable sales growth in new and expanding markets, help us meet

product demand, and increase our manufacturing efficiencies and capacity. Cash used in investing activities in fiscal 2019 increased by $645.0 million from fiscal 2018 mainly due to more cash utilized for our acquisitions of CMW and a Northeastern U.S. distribution company in fiscal 2019 than the cash utilized for the acquisition of L.T. Rich in fiscal 2018, partially offset by cash proceeds from the sale of a used underground construction equipment business.

Cash Flows from Financing Activities

Cash provided by financing activities in fiscal 2019 was $299.5 million compared to $252.1 million of cash used in financing activities in fiscal 2018, an increase of $551.6 million. This increase in cash provided by financing activities was mainly due to the cash proceeds as the result of the issuance of indebtedness under our term loan credit agreement and amounts drawn on our revolving credit facility to fund the CMW acquisition and the issuance of our private placement senior notes, reduced cash utilized for purchases of Toro common stock compared to fiscal 2018, and higher cash provided from the exercise of stock options. These sources of cash were partially offset by more cash utilized for repayments of our outstanding indebtedness under our revolving credit facility and term loan credit agreement and more cash utilized for dividend payments on shares of our common stock compared to fiscal 2018.

Cash and Cash Equivalents

Cash and cash equivalents as of the end of fiscal 2019 decreased by $137.3 million compared to the end of fiscal 2018.

As of October 31, 2019, cash and cash equivalents held by our foreign subsidiaries were approximately $97.5 million. We consider that $17.2 million of cash and cash equivalents held by our foreign subsidiaries are intended to be indefinitely reinvested. Should these cash and cash equivalents be distributed in the future in the form of dividends or otherwise, we may be subject to foreign withholding taxes, state income taxes, and/or additional federal taxes for currency fluctuations. As of October 31, 2019, the unrecognized deferred tax liabilities for temporary differences related to our investment in non-U.S. subsidiaries, and any withholding, state, or additional federal taxes upon any future repatriation, are not material and have not been recorded.

Capital Expenditures

Fiscal 2019 capital expenditures of $92.9 million were $2.8 million higher than fiscal 2018. This increase was mainly attributable to incremental capital expenditures as a result of our acquisition of CMW, as well as continued investment in our facilities, new product tooling, productivity improvements in our manufacturing and distribution processes, and continued replacement of production equipment. Capital expenditures for fiscal 2020 are expected to be approximately $100.0 million as we plan to continue to invest in our facilities, new product tooling, productivity improvements in our manufacturing and distribution processes, and continued replacement of production equipment.

Other Long-Term Assets

Other long-term assets as of October 31, 2019 were $1,207.7 million compared to $676.3 million as of October 31, 2018, an increase of $531.3 million. This increase was driven mainly by our acquisition of CMW, which resulted in significant increases in other intangible assets; property, plant and equipment; and goodwill. In addition, our other long-term assets increased as a result of purchases of property, plant, and equipment in our legacy businesses. These increases to other long-term assets were partially offset by amortization of intangible assets and the reclassification of our long-term deferred tax assets to long-term deferred tax liabilities as a result of our acquisition of CMW.

Included in other long-term assets as of October 31, 2019 was goodwill in the amount of $362.3 million. Based on our annual goodwill impairment analysis, we determined there was no impairment of goodwill during fiscal 2019 for any of our reporting units as the fair values of the reporting units exceeded their carrying values, including goodwill.

Liquidity and Capital Resources

Our businesses are seasonally working capital intensive and require funding for purchases of raw materials used in production, replacement parts inventory, payroll and other administrative costs, capital expenditures, establishment of new facilities, expansion and renovation of existing facilities, as well as for financing receivables from customers that are not financed with Red Iron or other third-party financial institutions. Our accounts receivable balances historically increase between January and April as a result of typically higher sales volumes and extended payment terms made available to our customers, and typically decrease between May and December when payments are received. We believe that the funds available through existing, and potential future, financing arrangements and forecasted cash flows will be sufficient to provide the necessary capital resources for our anticipated working capital needs, capital expenditures, investments, debt repayments, quarterly cash dividend payments, and common stock repurchases, all as applicable, for at least the next twelve months.

Indebtedness

As of October 31, 2019, we had $700.8 million of outstanding indebtedness that included $100.0 million of 7.8 percent debentures due June 15, 2027, $123.9 million of 6.625 percent senior notes due May 1, 2037, $100.0 million under our $200.0 million three year unsecured senior term loan facility, $180.0 million under our $300.0 million five year unsecured senior term loan facility, $100.0 million of 3.81 percent Series A Senior Notes, $100.0 million of 3.91 percent Series B Senior Notes, and no outstanding borrowings under our revolving credit facility. The October 31, 2019 outstanding indebtedness amounts were partially offset by debt issuance costs and deferred charges of $3.1 million related to our outstanding indebtedness. As of October 31, 2019, we have reclassified $79.9 million of the remaining outstanding principal balance under the term loan credit agreement, net of the related

proportionate share of debt issuance costs, to current portion of long-term debt within the Condensed Consolidated Balance Sheets as we intend to prepay such amount utilizing cash flows from operations within the next twelve months.

As of October 31, 2018, we had $312.5 million of outstanding indebtedness that included $100.0 million of 7.8 percent debentures due June 15, 2027, $123.9 million of 6.625 percent senior notes due May 1, 2037, and $91.0 million of outstanding borrowings under our revolving credit facility. The October 31, 2018 outstanding indebtedness amounts were partially offset by debt issuance costs and deferred charges of $2.3 million related to our outstanding indebtedness. As of October 31, 2018, the $91.0 million of outstanding borrowings under our revolving credit facility was classified as long-term debt within our Condensed Consolidated Balance Sheets.

Revolving Credit Facility

Seasonal cash requirements are financed from operations, cash on hand, and with borrowings under our $600.0 million unsecured senior five-year revolving credit facility that expires in June 2023. Included in our $600.0 million revolving credit facility is a $10.0 million sublimit for standby letters of credit and a $30.0 million sublimit for swingline loans. At our election, and with the approval of the named borrowers on the revolving credit facility and the election of the lenders to fund such increase, the aggregate maximum principal amount available under the facility may be increased by an amount up to $300.0 million. Funds are available under the revolving credit facility for working capital, capital expenditures, and other lawful corporate purposes, including, but not limited to, acquisitions and common stock repurchases, subject in each case to compliance with certain financial covenants described below.

Outstanding loans under the revolving credit facility (other than swingline loans), if applicable, bear interest at a variable rate generally based on LIBOR or an alternative variable rate based on the highest of the Bank of America prime rate, the federal funds rate or a rate generally based on LIBOR, in each case subject to an additional basis point spread that is calculated based on the better of the leverage ratio (as measured quarterly and defined as the ratio of total indebtedness to consolidated earnings before interest and taxes plus depreciation and amortization expense) and debt rating of Toro. Swingline loans under the revolving credit facility bear interest at a rate determined by the swingline lender or an alternative variable rate based on the highest of the Bank of America prime rate, the federal funds rate or a rate generally based on LIBOR, in each case subject to an additional basis point spread that is calculated based on the better of the leverage ratio and debt rating of Toro. Interest is payable quarterly in arrears. Our debt rating for long-term unsecured senior, non-credit enhanced debt was unchanged during the fourth quarter of fiscal 2019 by Standard and Poor's Ratings Group at BBB and by Moody's Investors Service at Baa3. If our debt rating falls below investment grade and/or our leverage ratio rises above 1.50, the basis point spread applicable in determining the interest payable on our outstanding debt under the revolving credit facility could increase. However, the credit commitment could not be canceled by the banks based solely on a ratings downgrade. For the fiscal years ended October 31, 2019 and October 31, 2018, we incurred interest expense of approximately $1.9 million and $1.3 million, respectively, on outstanding borrowings under the revolving credit facility.

Our revolving credit facility contains customary covenants, including, without limitation, financial covenants, such as the maintenance of minimum interest coverage and maximum leverage ratios; and negative covenants, which among other things, limit disposition of assets, consolidations and mergers, restricted payments, liens, and other matters customarily restricted in such agreements. Most of these restrictions are subject to certain minimum thresholds and exceptions. Under the revolving credit facility, we are not limited in the amount for payments of cash dividends and common stock repurchases as long as, both before and after giving pro forma effect to such payments, our leverage ratio from the previous quarter compliance certificate is less than or equal to 3.5 (or, at our option (which we may exercise twice during the term of the facility) after certain acquisitions with aggregate consideration in excess of $75.0 million, for the first four quarters following the exercise of such option, is less than or equal to 4.0), provided that immediately after giving effect to any such proposed action, no default or event of default would exist. As of October 31, 2019, we were not limited in the amount for payments of cash dividends and common stock repurchases. We were in compliance with all covenants related to the credit agreement for our revolving credit facility as of October 31, 2019, and we expect to be in compliance with all covenants during fiscal 2020. If we were out of compliance with any covenant required by this credit agreement following the applicable cure period, the banks could terminate their commitments unless we could negotiate a covenant waiver from the banks. In addition, our long-term senior notes, debentures, term loan facilities, and any amounts outstanding under the revolving credit facility could become due and payable if we were unable to obtain a covenant waiver or refinance our borrowings under our revolving credit facility.

As of October 31, 2019, we had no borrowings under the revolving credit facility but did have $1.9 million outstanding under the sublimit for standby letters of credit, resulting in $598.1 million of unutilized availability under our revolving credit facility. As of October 31, 2018, we had $91.0 million of outstanding borrowings under the revolving credit facility and $1.5 million outstanding under the sublimit for standby letters of credit, resulting in $507.5 million of unutilized availability under our revolving credit facility.

Term Loan Credit Agreement

In March 2019, we entered into a term loan credit agreement with a syndicate of financial institutions for the purpose of partially funding the purchase price of our acquisition of CMW and the related fees and expenses incurred in connection with such acquisition. The term loan credit agreement provided for a $200.0 million three year unsecured senior term loan facility maturing on April 1, 2022 and a $300.0 million five year unsecured senior term loan facility maturing on April 1, 2024.

The funds under both term loan facilities were received on April 1, 2019 in connection with the closing of our acquisition of CMW. There are no scheduled principal amortization payments prior to maturity on the $200.0 million three year unsecured senior term loan facility. For the $300.0 million five year unsecured senior term loan facility, we are required to make quarterly principal amortization payments of 2.5 percent of the original aggregate principal balance beginning with the last business day of the thirteenth calendar quarter ending after April 1, 2019, with the remainder of the unpaid principal balance due at maturity. No principal payments are required during the first three and one quarter (3.25) years of the $300.0 million five year unsecured senior term loan facility. The term loan facilities may be prepaid and terminated at our election at any time without penalty or premium. As of October 31, 2019, we have prepaid $100.0 million and $120.0 million against the outstanding principal balances of the $200.0 million three year unsecured senior term loan facility and $300.0 million five year unsecured senior term loan facility, respectively.

Outstanding borrowings under the term loan credit agreement bear interest at a variable rate generally based on LIBOR or an alternative variable rate, based on the highest of the Bank of America prime rate, the federal funds rate, or a rate generally based on LIBOR, in each case subject to an additional basis point spread as defined in the term loan credit agreement. Interest is payable quarterly in arrears. For the fiscal year ended October 31, 2019, we incurred interest expense of approximately $7.5 million on the outstanding borrowings under the term loan credit agreement.

The term loan credit agreement contains customary covenants, including, without limitation, financial covenants generally consistent with those applicable under our revolving credit facility, such as the maintenance of minimum interest coverage and maximum leverage ratios; and negative covenants, which among other things, limit disposition of assets, consolidations and mergers, restricted payments, liens, and other matters customarily restricted in such agreements. Most of these restrictions are subject to certain minimum thresholds and exceptions. Under the term loan credit agreement, we are not limited in the amount for payments of cash dividends and common stock repurchases as long as, both before and after giving pro forma effect to such payments, our leverage ratio from the previous quarter compliance certificate is less than or equal to 3.5 (or, at our option (which we may exercise twice during the term of the facility) after certain acquisitions with aggregate consideration in excess of $75.0 million, for the first four quarters following the exercise of such option, is less than or equal to 4.0), provided that immediately after giving effect of any such proposed action, no default or event of default would exist. As of October 31, 2019, we were not limited in the amount for payments of cash dividends and common stock repurchases. We were in compliance with all covenants related to our term loan credit agreement as of October 31, 2019. If we were out of compliance with any covenant required by this term loan credit agreement following the applicable cure period, our term loan facilities, long-term senior notes, debentures, and any amounts outstanding under the revolving credit facility could become due and payable if we were unable to obtain a covenant waiver or refinance our borrowings under our credit agreement.

3.81% Series A and 3.91% Series B Senior Notes

On April 30, 2019, we entered into a private placement note purchase agreement with certain purchasers ("holders") pursuant to which we agreed to issue and sell an aggregate principal amount of $100.0 million of 3.81 percent Series A Senior Notes due June 15, 2029 ("Series A Senior Notes") and $100.0 million of 3.91 percent Series B Senior Notes due June 15, 2031 ("Series B Senior Notes" and together with the Series A Senior Notes, the "Senior Notes"). On June 27, 2019, we issued $100.0 million of the Series A Senior Notes and $100.0 million of the Series B Senior Notes pursuant to the private placement note purchase agreement. The Senior Notes are senior unsecured obligations of Toro.

Interest on the Senior Notes is payable semiannually on the 15th day of June and December in each year, commencing on December 15, 2019. For the fiscal year ended October 31, 2019, we incurred interest expense of approximately $2.6 million on the outstanding borrowings under the private placement note purchase agreement. No principal is due on the Senior Notes prior to their stated due dates.

We have the right to prepay all or a portion of either series of the Senior Notes in amounts equal to not less than 10.0 percent of the principal amount of the Senior Notes then outstanding upon notice to the holders of the series of Senior Notes being prepaid for 100.0 percent of the principal amount prepaid, plus a make-whole premium, as set forth in the private placement note purchase agreement, plus accrued and unpaid interest, if any, to the date of prepayment. In addition, at any time on or after the date that is 90 days prior to the maturity date of the respective series, we have the right to prepay all of the outstanding Senior Note of such series for 100.0 percent of the principal amount so prepaid, plus accrued and unpaid interest, if any, to the date of prepayment. Upon the occurrence of certain change of control events, we are required to offer to prepay all Senior Notes for the principal amount thereof plus accrued and unpaid interest, if any, to the date of prepayment.

The private placement note purchase agreement contains customary representations and warranties of Toro, as well as certain customary covenants, including, without limitation, financial covenants, such as the maintenance of minimum interest coverage and maximum leverage ratios, and other covenants, which, among other things, provide limitations on transactions with affiliates, mergers, consolidations and sales of assets, liens and priority debt. Under the private placement note purchase agreement, we are not limited in the amount for payments of cash dividends and common stock repurchases as long as, both before and after giving pro forma effect to such payments, our leverage ratio from the previous quarter compliance certificate is less than or equal to 3.5 (or, at our option (which we may exercise twice during the term of the facility) after certain acquisitions with aggregate consideration in excess of $75.0 million, for the first four quarters following the exercise of such option, is less than or equal to 4.0), provided that immediately after giving effect of any such proposed action,

no default or event of default would exist. As of October 31, 2019, we were not limited in the amount for payments of cash dividends and stock repurchases. We were in compliance with all covenants related to the private placement note purchase agreement as of October 31, 2019 and we expect to be in compliance with all covenants during fiscal 2020. If we were out of compliance with any covenant required by this private placement note purchase agreement following the applicable cure period, our term loan facilities, long-term senior notes, debentures, and any amounts outstanding under the revolving credit facility would become due and payable if we were unable to obtain a covenant waiver or refinance our borrowings under our private placement note purchase agreement.

Capital Structure

The following table details the components of our total capitalization and debt-to-capitalization ratio:

(Dollars in millions)

Fiscal Years Ended October 31 2019 2018
Long-term debt, including current portion $700.8 $312.5
Stockholders' equity $859.6 $668.9
Debt-to-capitalization ratio 44.9% 31.8%

Our debt-to-capitalization ratio increased in fiscal 2019 compared to fiscal 2018 primarily due to an increase in long-term debt driven by the issuance of indebtedness under our term loan credit agreement and amounts drawn on our revolving credit facility to fund the CMW acquisition and the issuance of our private placement senior notes, partially offset by repayments of outstanding borrowings on our revolving credit facility and term loan credit agreement. Stockholders' equity also increased in fiscal 2019 compared to fiscal 2018 primarily due to increased net earnings, reduced purchases of Toro common stock, and increased exercises of stock options, partially offset by increased cash dividend payments on shares of our common stock.

Cash Dividends

In each quarter of fiscal 2019, our Board of Directors declared a common stock cash dividend of $0.225 per share, which was a 12.5 percent increase over our common stock cash dividend of $0.20 per share paid each quarter in fiscal 2018. On December 3, 2019, our Board of Directors increased our fiscal 2020 first quarter common stock cash dividend by 11.1 percent to $0.25 per share from the quarterly common stock cash dividend of $0.225 per share paid in the first quarter of fiscal 2019. Future common stock cash dividends will depend upon our financial condition, capital requirements, results of operations, and other factors deemed relevant by our Board of Directors.

Share Repurchases

During fiscal 2019, we curtailed repurchasing shares of our common stock under our Board authorized stock repurchase program after our fiscal 2019 first quarter, as we focused on repaying the outstanding borrowings issued to fund the purchase price for our acquisition of CMW. As of October 31,

2019, 7,042,256 shares remained available for repurchase under our Board authorized stock repurchase program. Our Board authorized stock repurchase program provides shares for use in connection with our equity compensation plans. We expect to repurchase shares of our common stock in fiscal 2020, depending on market conditions and other factors.

The following table provides information with respect to repurchases of our common stock during the past three fiscal years:

(Dollars in millions, except share and per share data)

Fiscal Years Ended October 31 2019 2018 2017
Shares of Board authorized common stock purchased 359,758 2,579,864 2,710,837
Cost to repurchase common stock $20.0 $160.4 $159.4
Average price paid per share $55.71 $62.19 $58.78

Customer Financing Arrangements

Wholesale Financing

We are party to a joint venture with TCFIF, established as Red Iron, the primary purpose of which is to provide inventory financing to certain distributors and dealers of certain of our products in the U.S. that enables them to carry representative inventories of our products. In addition, TCFCFC provides inventory financing to dealers of certain of our products in Canada. Under these financing arrangements, down payments are not required and, depending on the finance program for each product line, finance charges are incurred by us, shared between us and the distributor and/or the dealer, or paid by the distributor or dealer. Red Iron retains a security interest in the distributors' and dealers' financed inventories, and those inventories are monitored regularly. Financing terms to the distributors and dealers require payment as the equipment, which secures the indebtedness, is sold to customers or when payment terms become due, whichever occurs first. Rates are generally indexed to LIBOR plus a fixed percentage that differs based on whether the financing is for a distributor or dealer. Rates may also vary based on the product that is financed. Red Iron financed $1,924.9 million of new receivables for dealers and distributors during fiscal 2019, of which $486.8 million of net receivables were outstanding as of October 31, 2019.

We also have floor plan financing agreements with other third-party financial institutions to provide floor plan financing to certain dealers not financed through Red Iron, which include agreements with third-party financial institutions in the U.S. and internationally as a result of our acquisition of CMW and in Australia. These third-party financing companies financed $235.4 million of receivables for such dealers and distributors during fiscal 2019, of which $148.4 million was outstanding as of October 31, 2019.

We entered into a limited inventory repurchase agreement with Red Iron. Under such limited inventory repurchase agreement agreement, we have agreed to repurchase products repossessed by Red Iron and TCFCFC, up to a maximum aggregate amount of $7.5 million in a calendar year. Additionally, as a result of

our financing agreements with the separate third-party financial institutions, we have also entered into inventory repurchase agreements with the separate third-party financial institutions, for which we have agreed to repurchase products repossessed by the separate third-party financial institutions. As of October 31, 2019, we were contingently liable to repurchase up to a maximum amount of $133.4 million of inventory related to receivables under these inventory repurchase agreements. Our financial exposure under these inventory repurchase agreements is limited to the difference between the amount paid to Red Iron or other third-party financing institutions for repurchases of inventory and the amount received upon any subsequent resale of the repossessed product. We have repurchased immaterial amounts of inventory pursuant to such arrangements over the past three fiscal years. However, a decline in retail sales or financial difficulties of our distributors or dealers could cause this situation to change and thereby require us to repurchase financed product, which could have an adverse effect on our operating results.

We continue to provide financing in the form of open account terms to home centers and mass retailers; general line irrigation dealers; international distributors and dealers other than the Canadian distributors and dealers to whom Red Iron or other third-party financing institutions provide financing arrangements; ag-irrigation dealers and distributors; government customers; and rental companies.

End-User Financing

We have agreements with third-party financing companies to provide lease-financing options to golf course, sports fields and grounds equipment and underground construction equipment customers in the U.S., Canada, Australia, and select countries in Europe. The purpose of these agreements is to provide end-users of our products alternative financing options when purchasing our products. We have no material contingent liabilities for residual value or credit collection risk under these agreements with third-party financing companies.

From time to time, we enter into agreements where we provide recourse to third-party finance companies in the event of default by the customer for lease payments to the third-party finance company. Our maximum exposure for credit collection under those arrangements as of October 31, 2019 was $10.1 million.

Termination or any material change to the terms of our end-user financing arrangements, availability of credit for our customers, including any delay in securing replacement credit sources, or significant financed product repurchase requirements could have a material adverse impact on our future operating results.

Contractual Obligations

We are obligated to make future payments under various existing contracts, such as debt agreements, operating lease agreements, unconditional purchase obligations, and other long-term obligations. The following table summarizes our contractual obligations as of October 31, 2019:

(Dollars in millions)

Contractual Obligations Payments Due by Period Total Less Than 1 Year 1-3 Years 3-5 Years More Than 5 Years
Long-term debt1 $705.0 $— $115.0 $165.0 $425.0
Interest payments2 309.2 31.9 62.6 53.8 160.9
Purchase obligations3 24.8 24.5 0.3 — —
Operating leases4 83.0 17.1 28.6 18.6 18.7
Other5 15.3 6.0 8.1 0.6 0.6
Total $1,137.3 $79.5 $214.6 $238.0 $605.2

1 Principal payments based on the maturity dates defined in our long-term debt agreements.

2 Interest payments for outstanding long-term debt obligations. Interest on variable rate debt was calculated using the interest rate as of October 31, 2019.

3 Purchase obligations represent contracts or firm commitments for the purchase of commodities, components, parts, and accessories, as well as contracts or firm commitments to purchase property, plant, and equipment, as applicable.

4 Operating lease obligations represent contracts that convey our right to use certain property, plant, or equipment assets in exchange for consideration and do not include payments to property owners covering real estate taxes and common area maintenance.

5 Payment obligations for corporate information technology software and services, as well as other miscellaneous contractual obligations.

In addition to the contractual obligations described in the preceding table, we may be obligated for additional net cash outflows related to $2.5 million of unrecognized tax benefits, including interest and penalties. The payment and timing of any such payments is affected by the ultimate resolution of the tax years that are under audit or remain subject to examination by the relevant taxing authorities.

Off-Balance Sheet Arrangements

We have off-balance sheet arrangements relating to our operating lease agreements for certain property, plant, or equipment assets utilized in the normal course of business, such as buildings for manufacturing facilities, office space, distribution centers, and warehouse facilities; land for product testing sites; machinery and equipment for research and development activities, manufacturing and assembly processes, and administrative tasks; and vehicles for sales, marketing and distribution activities. Refer to the section titled "Contractual Obligations" within this MD&A for our future payment obligations under our operating lease agreements.

We also have off-balance sheet arrangements with Red Iron, our joint venture with TCFIF, TCFCFC, and other third-party financial institutions in which inventory receivables for certain dealers and distributors are financed by Red Iron, TCFCFC, or the other third-party financial institutions. Additional information regarding such agreements is disclosed within the section titled "Wholesale Financing" included in Item 7, "Management's Discussion and Analysis of Financial Condition and Results of Operations" and Note 11, Investment in Joint Venture, and Note 12, Commitments and Contingent Liabilities, of the Notes to Consolidated Financial Statements included in Item 8, "Financial Statements and Supplementary Data" of this Annual Report on Form 10-K.

Additionally, we use standby letters of credit under our revolving credit facility, import letters of credit, and surety bonds in the ordinary course of business to ensure the performance of contractual obligations, as required under certain contracts. As of October 31, 2019, we had $10.0 million of maximum availability and $1.9 million outstanding under the sublimit for standby letters of credit under our revolving credit facility. As of October 31, 2019, we had $13.3 million of maximum availability and $4.7 million in outstanding import letters of credit issued. As of October 31, 2019, we did not have an outstanding balance on our surety bonds.

Market Risk

Due to the nature and scope of our operations, we are subject to exposures that arise from fluctuations in interest rates, foreign currency exchange rates, and commodity costs. We are also exposed to equity market risk pertaining to the trading price of our common stock. Additional information regarding such market risks is disclosed in Part II, Item 7A, "Quantitative and Qualitative Disclosures about Market Risk," and Note 13, Financial Instruments, of the Notes to Consolidated Financial Statements within Part II, Item 8, "Financial Statements and Supplementary Data" of this Annual Report on Form 10-K.

NON-GAAP FINANCIAL MEASURES

We have provided non-GAAP financial measures, which are not calculated or presented in accordance with GAAP, as information supplemental and in addition to the most directly comparable financial measures presented in this Annual Report on Form 10-K that are calculated and presented in accordance with GAAP. We use these non-GAAP financial measures in making operating decisions because we believe these non-GAAP financial measures provide meaningful supplemental information regarding our core operational performance and provide us with a better understanding of how to allocate resources to both ongoing and prospective business initiatives. Additionally, these non-GAAP financial measures facilitate our internal comparisons to both our historical operating results and to our competitors' operating results by factoring out potential differences caused by charges not related to our regular, ongoing business, including, without limitation, non-cash charges, certain large and unpredictable charges, acquisitions and dispositions, legal settlements, and tax positions. Further, we believe that such non-GAAP financial measures, when considered in conjunction with our Consolidated Financial Statements prepared in accordance with U.S. GAAP, provide investors with useful supplemental financial information to better understand our core operational performance. Such non-GAAP financial measures should not be considered superior to, as a substitute for, or as an alternative to, and should be considered in conjunction with, the most directly comparable GAAP financial measures. The non-GAAP financial measures may differ from similar measures used by other companies.

The following table provides a reconciliation of financial measures calculated and reported in accordance with GAAP, as well as adjusted non-GAAP financial measures, for the fiscal years ended October 31, 2019 and October 31, 2018:

(Dollars in thousands, except per share data) Fiscal Years Ended October 31, 2019 October 31, 2018
Gross profit $1,047,963 $941,011
Acquisition-related costs1 42,958 —
Management actions2 10,316 —
Adjusted non-GAAP gross profit $1,101,237 $941,011
Operating earnings $325,029 $373,085
Acquisition-related costs1 62,333 —
Management actions2 16,311 —
Adjusted non-GAAP operating earnings $403,673 $373,085
Earnings before income taxes $322,133 $372,397
Acquisition-related costs1 62,333 —
Management actions2 17,167 —
Adjusted non-GAAP earnings before income taxes $401,633 $372,397
Net earnings $273,983 $271,939
Acquisition-related costs1 51,149 —
Management actions2 13,817 —
Tax impact of share-based compensation3 (13,677) (14,555)
U.S. Tax Reform4 (1,012) 32,702
Adjusted non-GAAP net earnings $324,260 $290,086
Diluted EPS $2.53 $2.50
Acquisition-related costs1 0.47 —
Management actions2 0.13 —
Tax impact of share-based compensation3 (0.12) (0.13)
U.S. Tax Reform4 (0.01) 0.30
Adjusted non-GAAP diluted EPS $3.00 $2.67

45

Fiscal Years Ended October 31, 2019 October 31, 2018
Effective tax rate 14.9% 27.0%
Acquisition-related costs1 (0.3)% —%
Management actions2 0.1% —%
Tax impact of share-based compensation3 4.3% 3.9%
U.S. Tax Reform4 0.3% (8.8)%
Adjusted non-GAAP effective tax rate 19.3% 22.1%

1 During the second quarter of fiscal 2019, we acquired CMW. Acquisition-related costs represent integration and transaction costs incurred, as well as charges incurred for the take-down of the inventory fair value step-up amount and amortization of the backlog intangible asset resulting from purchase accounting adjustments, related to our acquisition of CMW during the fiscal year ended October 31, 2019. Refer to Note 2, Business Combinations, of the Notes to Consolidated Financial Statements included in Part II, Item 8, "Financial Statements and Supplementary Data" of this Annual Report on Form 10-K for additional information regarding our acquisition of CMW.

2 During the third quarter of fiscal 2019, we announced the wind down our Toro-branded large horizontal directional drill and riding trencher product line. Additionally, during the fourth quarter of fiscal 2019, we incurred charges for a corporate restructuring event and a loss on the divestiture of a used underground construction equipment business. Management actions represent charges incurred during the fiscal year ended October 31, 2019 for the Toro underground wind down, including charges related to the write-down of inventory, anticipated inventory retail support activities, and accelerated depreciation on fixed assets; the corporate restructuring event, including employee severance charges; and the divestiture of a used underground construction equipment business, including the loss on the sale of the business. Refer to Note 7, Management Actions, of the Notes to Consolidated Financial Statements included in Part II, Item 8, "Financial Statements and Supplementary Data" of this Annual Report on Form 10-K for additional information regarding our these management actions.

3 In the first quarter of fiscal 2017, we adopted Accounting Standards Update No. 2016-09, Stock-based Compensation: Improvements to Employee Share-based Payment Accounting, which requires that any excess tax deduction for share-based compensation be immediately recorded within income tax expense. These amounts represent the discrete tax benefits recorded as excess tax deductions for share-based compensation during the fiscal years ended October 31, 2019 and October 31, 2018.

4 Signed into law on December 22, 2017, the Tax Act, reduced the U.S. federal corporate tax rate from 35.0 percent to 21.0 percent, effective January 1, 2018, resulting in a blended U.S. federal statutory tax rate of 23.3 percent for the fiscal year ended October 31, 2018. This reduction in rate required the re-measurement of our net deferred taxes as of the date of enactment. The Tax Act also imposed a one-time deemed repatriation tax on our historical undistributed earnings and profits of foreign affiliates. During the fiscal year ended October 31, 2019, we recorded a tax benefit of $1.0 million related to a prior year true-up of the Tax Act. During the fiscal year ended October 31, 2018, the remeasurement of our net deferred taxes and the one-time deemed repatriation tax resulted in a combined charge of $32.7 million.

CRITICAL ACCOUNTING POLICIES AND ESTIMATES

In preparing our Consolidated Financial Statements in conformity with U.S. GAAP, we must make decisions that impact the reported amounts of assets, liabilities, revenues and expenses, and related disclosures. Such decisions include the selection of the appropriate accounting principles to be applied and the assumptions on which to base accounting estimates. In reaching such decisions, we apply judgments based on our understanding and analysis of the relevant circumstances, historical experience, and actuarial and other independent external third-party specialist valuations, when applicable. Actual amounts could differ from those estimated at the time the Consolidated Financial Statements are prepared.

Our significant accounting policies are described in Note 1 of the Notes to Consolidated Financial Statements. Some of those significant accounting policies require us to make difficult, subjective, or complex judgments or estimates. An accounting estimate is considered to be critical if it meets both of the following criteria: (i) the estimate requires assumptions about matters that are highly uncertain at the time the accounting estimate is made, and (ii) different estimates reasonably could have been used, or changes in the estimate that are reasonably likely to occur from period to period may have a material impact on the presentation of our financial condition, changes in financial condition, or results of operations. Our critical accounting policies and estimates include the following:

Warranty Reserve

Warranty coverage on our products is generally for specified periods of time and on select products' hours of usage, and generally covers parts, labor, and other expenses for non-maintenance repairs. Warranty coverage generally does not cover operator abuse or improper use. At the time of sale, we accrue a warranty reserve by product line for estimated costs in connection with future warranty claims. We also establish reserves for major rework campaigns. The amount of our warranty reserves is based primarily on the estimated number of products under warranty, historical average costs incurred to service warranty claims, the trend in the historical ratio of claims to sales, and the historical length of time between the sale and resulting warranty claim. We periodically assess the adequacy of our warranty reserves based on changes in these factors and record any necessary adjustments if actual claim experience indicates that adjustments are necessary. Actual claims could be higher or lower than amounts estimated, as the number and value of warranty claims can vary due to such factors as performance of new products, significant manufacturing or design defects not discovered until after the product is delivered to customers, product failure rates, and higher or lower than expected service costs for a repair. We believe that analysis of historical trends and knowledge of potential manufacturing or design problems provide sufficient information to establish a reasonable estimate for warranty claims at the time of sale. However, since we cannot predict with certainty future warranty claims or costs associated with servicing those claims, our actual warranty costs may differ

from our estimates. An unexpected increase in warranty claims or in the costs associated with servicing those claims would result in an increase in our warranty accrual and a decrease in our net earnings.

Sales Promotions and Incentives

At the time of sale, we record an estimate for sales promotion and incentive costs. Our estimates of sales promotion and incentive costs are based on the terms of the arrangements with customers, historical payment experience, field inventory levels, volume purchases, and expectations for changes in relevant trends in the future. The expense of each program is classified as a reduction from gross sales or as a component of selling, general and administrative expense, depending on the nature of the respective program.

Examples of significant sales promotions and incentive programs in which the related expense is classified as a reduction from gross sales are as follows:

  • Off-Invoice Discounts: Our costs for off-invoice discounts represent a reduction in the selling price of our products given at the time of sale.
  • Rebate Programs: Our rebate programs are generally based on claims submitted from either our direct customers or end-users of our products, depending upon the program. The amount of the rebate varies based on the specific program and is either a dollar amount or a percentage of the purchase price and can also be based on actual retail price as compared to our selling price.
  • Incentive Discounts: Our costs for incentive discount programs are based on our customers’ purchase or retail sales goals of certain quantities or mixes of product during a specified time period, which are tracked on an annual or quarterly basis depending on the program.
  • Financing Programs: Our financing programs, consist of wholesale floor plan financing and end-user retail financing. Costs incurred for wholesale floor plan financing programs represent financing costs associated with programs under which we pay a portion of the interest cost to finance distributor and dealer inventories through third-party financing arrangements for a specific period of time. End-user retail financing is similar to floor planning with the difference being that retail financing programs are offered to end-user customers under which we pay a portion of interest costs on behalf of end-users for financing purchases of our equipment.
  • Commissions Paid to Service Home Centers: We pay commissions to representative agencies to service home centers to ensure appropriate store sets for all Toro product. This estimated expense is recorded at point of sale. In addition, Toro dealers are paid a commission to set up and deliver riding product purchased at certain home centers.

Examples of significant sales promotions and incentive programs in which the related expense is classified as a component of selling, general, and administrative expense are as follows:

  • Commissions Paid to Distributors and Dealers: For certain products, we use a distribution network of dealers and distributors that purchase and take possession of products for sale to the end customer. In addition, we have dealers and distributors that act as sales agents for us on certain products using a direct-selling type model. Under this direct-selling type model, our network of distributors and dealers facilitates a sale directly to the dealer or end-user customer on our behalf. Commissions to distributors and dealers in these instances represent commission payments to sales agents that are also our customers.
  • Cooperative Advertising: Cooperative advertising programs are based on advertising costs incurred by distributors and dealers for promoting our products. We support a portion of those advertising costs in which claims are submitted by the distributor or dealer along with evidence of the advertising material procured/produced and evidence of the cost incurred in the form of third-party invoices or receipts.

Estimates for sales promotion and incentive costs are based on the terms of the arrangements with customers, historical payment experience, field inventory levels, volume purchases, and expectations for changes in relevant trends in the future. Actual results may differ from these estimates if competitive factors dictate the need to enhance or reduce sales promotion and incentive accruals or if customer usage and field inventory levels vary from historical trends. Adjustments to sales promotions and incentive accruals are made from time to time as actual usage becomes known in order to properly estimate the amounts necessary to generate consumer demand based on market conditions as of the balance sheet date.

Goodwill and Indefinite-Lived Intangible Assets

Goodwill and indefinite-lived intangible assets are not amortized, but are tested at least annually for impairment and whenever events or changes in circumstances indicate that impairment may have occurred. We test goodwill for impairment at the reporting unit level and test indefinite-lived intangible assets for impairment at the individual indefinite-lived intangible asset or asset group level, as appropriate. Our impairment testing for goodwill is performed separately from our impairment testing of indefinite-lived intangible assets, but the income approach is utilized for both to determine fair value when a quantitative analysis is required. Under the income approach, we calculate the fair value of our reporting units and indefinite-lived intangible assets using the present value of future cash flows. Assumptions utilized in determining fair value under the income approach, such as forecasted growth rates and weighted-average cost of capital ("WACC"), are consistent with internal projections and operating plans. Materially different assumptions regarding future performance of our businesses or a different WACC rate could result in impairment losses.

Individual indefinite-lived intangible assets, or asset groups, are tested for impairment by comparing the carrying amounts of the respective asset, or asset group, to its estimated fair value. Our estimate of the fair value for an indefinite-lived intangible asset, or asset group, uses projected revenues from our forecasting process, assumed royalty rates, and a discount rate. If the fair value of the indefinite-lived intangible asset, or asset group, is less than its carrying value, an impairment loss is recognized in an amount equal to the excess.

In conducting our goodwill impairment test, we may elect to first perform a qualitative assessment to determine whether changes in events or circumstances since our most recent quantitative test for goodwill impairment indicate that it is more likely than not that the fair value of a reporting unit is less than its carrying amount. However, we have an unconditional option to bypass the qualitative assessment for any reporting unit and proceed directly to performing the quantitative analysis. If elected, in conducting the initial qualitative assessment, we analyze actual and projected growth trends for net sales, gross margin, and earnings for each reporting unit, as well as historical versus planned performance. Additionally, each reporting unit is assessed for critical areas that may impact its business, including macroeconomic conditions, market-related exposures, competitive changes, new or discontinued products, changes in key personnel, or any other potential risks to projected financial results. All assumptions used in the qualitative assessment require significant judgment. If, after evaluating the weight of the changes in events and circumstances, both positive and negative, we conclude that an impairment may exist, a quantitative test for goodwill impairment is performed.

If performed due to identified impairment indicators under the qualitative assessment, the duration of time since the most recent quantitative goodwill impairment test, or our election to bypass the qualitative assessment and move directly to the quantitative analysis, the quantitative goodwill impairment test is a one-step process. In performing the quantitative analysis, we compare the carrying value of a reporting unit, including goodwill, to its fair value. The carrying amount of each reporting unit is determined based on the amount of equity required for the reporting unit's activities, considering the specific assets and liabilities of the reporting unit. We do not assign corporate assets and liabilities to reporting units that do not relate to the operations of the reporting unit or are not considered in determining the fair value of the reporting unit. Our estimate of the fair value of our reporting units utilizes various inputs and assumptions, including projected operating results and growth rates from our forecasting process, applicable tax rates and a WACC rate. Where available, and as appropriate, comparable market multiples and our company's market capitalization are also used to corroborate the results of the discounted cash flow models. If the fair value of the reporting unit exceeds its carrying value, goodwill of the reporting unit is not impaired. If the carrying value of a reporting unit exceeds its fair value, an impairment charge would be recognized for the amount by which the carrying value of the reporting unit exceeds the its fair value, not to exceed the total amount of goodwill allocated to that reporting unit.

Inventory Valuation

We value our inventories at the lower of the cost of inventory or net realizable value, with cost determined by either the first-in, first-out method for most U.S. inventories or the last-in, first-out or average cost methods for all other inventories. We establish reserves for excess, slow moving, and obsolete inventory based on inventory levels, expected product life, and forecasted sales demand. Valuation of inventory can also be affected by significant redesign of existing products or replacement of an existing product by an entirely new generation product. In assessing the ultimate realization of inventories, we are required to make judgments as to future demand requirements compared with inventory levels. Reserve requirements are developed according to our projected demand requirements based on historical demand, competitive factors, and technological and product life cycle changes. It is possible that an increase in our reserve may be required in the future if there is a significant decline in demand for our products and we do not adjust our production schedule accordingly.

Though management considers reserve balances adequate and proper, changes in economic conditions in specific markets in which we operate could have an effect on the reserve balances required for excess, slow moving and obsolete inventory.

Business Combinations

We account for the acquisition of a business in accordance with the accounting standards codification guidance for business combinations, whereby the total consideration transferred is allocated to the assets acquired and liabilities assumed, including amounts attributable to non-controlling interests, when applicable, based on their respective estimated fair values as of the date of acquisition. Goodwill represents the excess of consideration transferred over the estimated fair value of the net assets acquired in a business combination.

Assigning estimated fair values to the assets acquired and liabilities assumed requires the use of significant estimates, judgments, inputs, and assumptions regarding the fair value of intangibles assets that are separately identifiable from goodwill, inventory, and property, plant, and equipment. Such significant estimates, judgments, inputs, and assumptions include, when applicable, the selection of an appropriate valuation method depending on the nature of the respective asset, such as the income approach, the market or sales comparison approach, or the cost approach; estimating future cash flows based on projected revenues and/or margins that we expect to generate subsequent to an acquisition; applying an appropriate discount rate to estimate the present value of those projected cash flows we expect to generate subsequent to an acquisition; selecting an appropriate royalty rate or estimating a customer attrition or technological obsolescence factor where necessary and appropriate given the nature of the respective asset; assigning the appropriate contributory asset charge where needed; determining an appropriate useful life and the related depreciation or amortization method for the respective asset;

and assessing the accuracy and completeness of other historical financial metrics of the acquiree used as standalone inputs or as the basis for determining estimated projected inputs such as margins, customer attrition, and costs to hold and sell product.

In determining the estimated fair value of intangible assets that are separately identifiable from goodwill, we typically utilize the income approach, which discounts the projected future cash flows using an appropriate discount rate that reflects the risks associated with the projected cash flows. However, in certain instances, particularly in relation to developed technology or patents, we may utilize the cost approach depending on the nature of the respective intangible asset and the recency of the development or procurement of such technology. In determining the estimated fair value of acquired inventory, we typically utilize the cost approach for raw materials and the sales comparison approach for work in process, finished goods, and service parts. In determining the estimated fair value of acquired property, plant, and equipment, we typically utilize the sales comparison approach or the cost approach depending on the nature of the respective asset and the recency of the construction or procurement of such asset.

Estimated fair values of intangible assets that are separately identifiable from goodwill, inventory, and property, plant, and equipment are based on available historical information, future expectations, and assumptions determined to be reasonable but are inherently uncertain with respect to future events, including economic conditions, competition, the useful life of the acquired assets and other factors. We may refine the estimated fair values of assets acquired and liabilities assumed, if necessary, over a period not to exceed one year from the date of acquisition by taking into consideration new information that, if known at the date of acquisition, would have affected the estimated fair values ascribed to the assets acquired and liabilities assumed. Estimates that are sensitive include judgments as to whether information gathered during the measurement period relate to information that was not yet available or whether subsequent developments have occurred that indicate the recognition of other asset or liabilities should be recorded within net earnings. The judgments made in determining the estimated fair value assigned to assets acquired and liabilities assumed, as well as the estimated useful life and depreciation or amortization method of each asset, can materially impact the net earnings of the periods subsequent to an acquisition through depreciation and amortization, and in certain instances through impairment charges, if the asset becomes impaired in the future. During the measurement period, any purchase price allocation changes that impact the carrying value of goodwill will affect any measurement of goodwill impairment taken during the measurement period, if applicable.

Recent Accounting Pronouncements

For information regarding recent accounting pronouncements, refer to Note 1, Summary of Significant Accounting Policies and Related Data, in our Notes to Consolidated Financial Statements in the sections entitled "New Accounting Pronouncements Adopted" and "New Accounting

Pronouncements Not Yet Adopted", included in Part II, Item 8, "Financial Statements and Supplementary Data" of this Annual Report on Form 10-K.

Market risk

As filed, 8,397 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

We are exposed to market risk stemming from changes in foreign currency exchange rates, interest rates, and commodity costs. We are also exposed to equity market risk pertaining to the trading price of our common stock. Changes in these factors could cause fluctuations in our earnings and cash flows. See further discussion on these market risks below.

Foreign Currency Exchange Rate Risk

We are exposed to foreign currency exchange rate risk arising from transactions in the normal course of business, such as sales to third-party customers, sales and loans to wholly-owned foreign subsidiaries, foreign plant operations, and purchases from suppliers. Our primary foreign currency exchange rate exposures are with the Euro, the Australian dollar, the Canadian dollar, the British pound, the Mexican peso, the Japanese yen, the Chinese Renminbi, and the Romanian New Leu against the U.S. dollar, as well as the Romanian New Leu against the Euro. We may also experience foreign currency exchange rate exposure as a result of the volatility and uncertainty that may arise as a result of the United Kingdom's process for exiting the European Union. Because our products are manufactured or sourced primarily from the U.S. and Mexico, a stronger U.S. dollar and Mexican peso generally have a negative impact on our results from operations, while a weaker U.S. dollar and Mexican peso generally have a positive effect.

To reduce our exposure to foreign currency exchange rate risk, we actively manage the exposure of our foreign currency exchange rate risk by entering into various derivative instruments to hedge against such risk, authorized under company policies that place controls on these hedging activities, with counterparties that are highly rated financial institutions. Decisions on whether to use such derivative instruments are primarily based on the amount of exposure to the currency involved and an assessment of the near-term market value for each currency. Our worldwide foreign currency exchange rate exposures are reviewed monthly. The gains and losses on our derivative instruments offset the changes in values of the related underlying exposures. Therefore, changes in the values of our derivative instruments are highly correlated with changes in the market values of underlying hedged items both at inception and over the life of the derivative instrument. For additional information regarding our derivative instruments, refer to the section entitled "Derivative Instruments and Hedging Activities" within Note 13, Financial Instruments, in the Notes to Consolidated Financial Statements included in Part II, Item 8, "Financial Statements and Supplementary Data" of this Annual Report on Form 10-K.

The foreign currency exchange contracts in the table below have maturity dates in fiscal 2020 through fiscal 2022. All items are non-trading and stated in U.S. dollars. As of October 31, 2019, the average contracted rate, notional amount, fair value, and the

gain (loss) at fair value of outstanding derivative instruments were as follows (in thousands, except average contracted rate):

Average Contracted Rate Notional Amount Fair Value Gain (Loss) at Fair Value
Buy U.S. dollar/Sell Australian dollar 0.7208 $95,937.9 $99,559.6 $3,621.7
Buy U.S. dollar/Sell Canadian dollar 1.3136 32,026.1 32,099.1 73.0
Buy U.S. dollar/Sell Euro 1.2025 119,825.0 125,997.1 6,172.1
Buy U.S. dollar/Sell British pound 1.3376 43,925.5 44,957.1 1,031.6
Buy Mexican peso/Sell U.S. dollar 20.1367 $1,489.8 $1,480.3 $(9.5)

Our net investment in foreign subsidiaries translated into U.S. dollars is not hedged. Any changes in foreign currency exchange rates would be reflected as a foreign currency translation adjustment, a component of accumulated other comprehensive loss in stockholders’ equity on the Consolidated Balance Sheets, and would not impact net earnings.

Interest Rate Risk

Our market risk exposure for interest rates relates primarily to LIBOR-based interest rates on our revolving credit facility and term loan credit agreement, as well as the potential increase in the fair value of our fixed-rate long-term debt resulting from a potential decrease in interest rates. However, we have no earnings or cash flow exposure due to interest rate risks on our fixed-rate long-term debt obligations. We generally do not use interest rate swaps to mitigate the impact of fluctuations in interest rates.

Included in long-term debt is $423.9 million of fixed rate debt that is not subject to variable interest rate fluctuations and $280.0 million of LIBOR-based borrowings under our term loan credit agreement. As of October 31, 2019, we did not have an outstanding balance on our LIBOR-based revolving credit facility. As of October 31, 2019, the estimated fair value of long-term debt with fixed interest rates was $493.8 million compared to its carrying amount of $423.9 million. Interest rate risk for fixed-rate, long-term debt is estimated as the potential increase in fair value, resulting from a hypothetical 10 percent decrease in interest rates, and amounts to approximately $17.1 million. The fair value is estimated by discounting the projected cash flows using the rate that similar amounts and terms of debt could currently be borrowed.

Commodity Cost Risk

Most of the commodities, components, parts, and accessories used in our manufacturing process and end-products, or to be sold as standalone end-products, are exposed to commodity cost changes, including, for example, as a result of inflation, deflation, changing prices, tariffs, and/or duties. Our primary commodity cost exposures are with steel, aluminum, petroleum and natural gas-based resins, copper, lead, rubber, linerboard, and others. We generally purchase commodities, components, parts, and accessories based upon market prices that are established with suppliers as part of the purchase process and generally attempt to obtain firm pricing from most of our suppliers for volumes consistent with planned production and estimates of wholesale and retail demand for our products.

We strategically work to mitigate any unfavorable impact as a result of changes to the cost of commodities, components, parts, and accessories that affect our product lines. Historically, we have mitigated, and we currently expect that we would mitigate, any commodity, components, parts, and accessories cost increases, in part, by collaborating with suppliers, reviewing alternative sourcing options, substituting materials, utilizing Lean methods, engaging in internal cost reduction efforts, utilizing tariff exclusions and duty drawback mechanisms, and increasing prices on some of our products, all as appropriate. Additionally, we enter into fixed-price contracts for future purchases of natural gas in the normal course of operations as a means to manage natural gas price risks. However, to the extent that commodity and component costs increase, as a result of inflation, tariffs, duties, or otherwise, and we do not have firm pricing from our suppliers, or our suppliers are not able to honor such prices, we may experience a decline in our gross margins to the extent we are not able to increase selling prices of our products or obtain manufacturing efficiencies to offset increases in commodity, component, parts, and accessories costs. In fiscal 2019, the average cost of commodities, components, parts, and accessories purchased, including the impact of inflation and tariff costs, was higher compared to the average cost of commodities, components, parts, and accessories purchased in fiscal 2018.

Further information regarding changing costs of commodities is presented in Part II, Item 7, "Management's Discussion and Analysis of Financial Condition and Results of Operations," of this Annual Report on Form 10-K in the section entitled "Inflation".

Equity Market Risk

The trading price volatility of our common stock impacts compensation expense related to our stock-based compensation plans. Refer to Note 9, Stock-Based Compensation Plans, in the Notes to Consolidated Financial Statements included in Part II, Item 8, "Financial Statements and Supplementary Data" of this Annual Report on Form 10-K for additional information regarding our stock-based compensation plans.

Controls and procedures

As filed, 4,885 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Evaluation of Disclosure Controls and Procedures

The company maintains disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) that are designed to provide reasonable assurance that information required to be disclosed by the company in the reports it files or submits under the Exchange Act is recorded, processed, summarized, and reported within the time periods specified in the SEC's rules and forms and that such information is accumulated and communicated to the company's management, including its principal executive and principal financial officers, or persons performing similar functions, as appropriate to allow timely decisions regarding required disclosure. In

designing and evaluating its disclosure controls and procedures, the company recognizes that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving the desired control objectives, and management is required to apply judgment in evaluating the cost-benefit relationship of possible internal controls.

The company's management evaluated, with the participation of the company's Chairman of the Board, President and Chief Executive Officer and Vice President, Treasurer and Chief Financial Officer, the effectiveness of the design and operation of the company's disclosure controls and procedures as of the end of the period covered by this Annual Report on Form 10-K. Based on that evaluation, the company's Chairman of the Board, President and Chief Executive Officer and Vice President, Treasurer and Chief Financial Officer concluded that the company's disclosure controls and procedures were effective as of the end of such period to provide reasonable assurance that information required to be disclosed in its Exchange Act reports is recorded, processed, summarized, and reported within the time periods specified in the SEC's rules and forms, and that such information relating to the company and its consolidated subsidiaries is accumulated and communicated to management, including the Chairman of the Board, President and Chief Executive Officer and Vice President, Treasurer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosures.

Evaluation of Internal Control Over Financial Reporting

The company's management report on internal control over financial reporting is included in this Annual Report on Form 10-K within Part II, Item 8, "Financial Statements and Supplementary Data" under the caption "Management's Report on Internal Control over Financial Reporting." The report of KPMG LLP, the company's independent registered public accounting firm, regarding the effectiveness of the company's internal control over financial reporting is included in this Annual Report on Form 10-K within Part II, Item 8, "Financial Statements and Supplementary Data" under the caption "Report of Independent Registered Public Accounting Firm." With the exception of integration activities in connection with the company's acquisition of CMW, there was no change in the company's internal control over financial reporting that occurred during the company's fourth fiscal quarter ended October 31, 2019 that has materially affected, or is reasonably likely to materially affect, the company's internal control over financial reporting.

On April 1, 2019, the company completed its acquisition of CMW. Prior to this acquisition, CMW was a privately-held company not subject to the Sarbanes-Oxley Act of 2002, the rules and regulations of the SEC, or other corporate governance requirements to which public companies may be subject. As of and for the fiscal year ended October 31, 2019, CMW accounted for approximately 35.0 percent of consolidated total assets and 14.8 percent of consolidated net sales of the company.

As part of the company's ongoing integration activities, the company is in the process of incorporating internal controls over significant processes specific to CMW that the company believes are appropriate and necessary to account for the acquisition and to consolidate and report the company's financial results. In accordance with guidance issued by the SEC, companies are permitted to exclude acquisitions from their final assessment of internal control over financial reporting during the year of acquisition. Accordingly, the company has excluded CMW from the company's assessment of internal control over financial reporting as of October 31, 2019 as the company's integration activities are ongoing and incomplete. Refer to the company's management report on internal control over financial reporting included in this Annual Report on Form 10-K within Part II, Item 8, "Financial Statements and Supplementary Data" under the caption "Management's Report on Internal Control over Financial Reporting" for additional information.

Figures reported in this filing

Standardized line items from the XBRL in this filing, for the period ended 2019-10-31. Comparative periods it repeats are left out.

Figures reported in this filing
Line itemPeriodValueXBRL concept
Revenue3 months2019-08-03 to 2019-10-31$734.4mus-gaap:RevenueFromContractWithCustomerExcludingAssessedTax
Revenue12 months2018-11-01 to 2019-10-31$3.14bnus-gaap:RevenueFromContractWithCustomerExcludingAssessedTax
Cost of revenue12 months2018-11-01 to 2019-10-31$2.09bnus-gaap:CostOfGoodsAndServicesSold
Gross profit3 months2019-08-03 to 2019-10-31$245.1mus-gaap:GrossProfit
Gross profit12 months2018-11-01 to 2019-10-31$1.05bnus-gaap:GrossProfit
Research and development12 months2018-11-01 to 2019-10-31$109.1mus-gaap:ResearchAndDevelopmentExpense
Selling, general and administrative12 months2018-11-01 to 2019-10-31$722.9mus-gaap:SellingGeneralAndAdministrativeExpense
Operating income12 months2018-11-01 to 2019-10-31$325.0mus-gaap:OperatingIncomeLoss
Interest expense12 months2018-11-01 to 2019-10-31$28.8mus-gaap:InterestExpense
Income tax12 months2018-11-01 to 2019-10-31$48.1mus-gaap:IncomeTaxExpenseBenefit
Diluted EPS3 months2019-08-03 to 2019-10-31$0.35us-gaap:EarningsPerShareDiluted
Diluted EPS12 months2018-11-01 to 2019-10-31$2.53us-gaap:EarningsPerShareDiluted
Basic EPS3 months2019-08-03 to 2019-10-31$0.36us-gaap:EarningsPerShareBasic
Basic EPS12 months2018-11-01 to 2019-10-31$2.57us-gaap:EarningsPerShareBasic
Diluted shares (weighted)12 months2018-11-01 to 2019-10-31108,090,000 sharesus-gaap:WeightedAverageNumberOfDilutedSharesOutstanding
Operating cash flow12 months2018-11-01 to 2019-10-31$337.4mus-gaap:NetCashProvidedByUsedInOperatingActivities
Capital expenditure12 months2018-11-01 to 2019-10-31$92.9mus-gaap:PaymentsToAcquirePropertyPlantAndEquipment
Dividends paid12 months2018-11-01 to 2019-10-31$96.1mus-gaap:PaymentsOfDividendsCommonStock
Share repurchases12 months2018-11-01 to 2019-10-31$20.0mus-gaap:PaymentsForRepurchaseOfCommonStock
Current assetsAt period end2019-10-31$1.12bnus-gaap:AssetsCurrent
Total assetsAt period end2019-10-31$2.33bnus-gaap:Assets
Current liabilitiesAt period end2019-10-31$757.0mus-gaap:LiabilitiesCurrent
Long-term debtAt period end2019-10-31$620.9mus-gaap:LongTermDebtNoncurrent
Current portion of debtAt period end2019-10-31$79.9mus-gaap:LongTermDebtCurrent
Shareholders' equityAt period end2019-10-31$859.6mus-gaap:StockholdersEquity

Source: SEC EDGAR, the filing index for accession 0000737758-19-000028. Last ingested by Listed: Nov 13, 2026, 15:03 ET. Listed shows no prices and gives no investment advice.