Fuel Tech, Inc.: Form 10-Q for the period ended Jun 30, 2010
Filed with the SEC on Aug 9, 2010 and accepted by EDGAR at Aug 9, 2010, 06:30 ET.
Management's discussion and analysis
As filed, 11,911 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.
Results of Operations
Revenues for the three months ended June 30, 2010 and 2009 were $18,902 and $18,922, respectively, while revenues for the six months ended June 30, 2010 and 2009 were $36,519 and $36,239, respectively. While revenues for the quarter and year-to-date remain flat, total revenues reflect an increase in FUEL CHEM technology segment revenues partially offset by lower APC technology segment revenues.
The Air Pollution Control (APC) technology segment generated revenues of $9,291 and $17,505 for the three- and six-month periods ended June 30, 2010, respectively, an increase of $114, or 1%, and a decrease of $492, or 3%, from the respective prior year periods due to timing of completion on existing capital project orders for pollution control equipment. While revenues are down from the prior year, this segment remains uniquely positioned to capitalize on the next phase of increasingly stringent U.S. air quality standards, specifically on NOx control. Interest in Fuel Tech’s suite of pollution control technologies, on both a new and retrofit basis, remains strong, both domestically and abroad.
Consolidated APC backlog at June 30, 2010 was $20,734 versus backlog at June 30, 2009 of approximately $13,632. Substantially all of the backlog as of June 30, 2010 should be recognized as revenue in fiscal 2010, although the timing of such revenue recognition in 2010 is subject to the timing of the expenses incurred on existing projects.
The FUEL CHEM technology segment generated revenues of $9,611 and $19,014 for the three- and six-month periods ended June 30, 2010, respectively, a decrease of $134, or 1%, and an increase $772, or 4%, versus the respective prior year periods. This year-to-date increase is primarily due to revenue from a new commercial customer with a one-time risk share payment relating to a successful demonstration performed in the prior year. Despite a flat year in 2009, both in terms of revenues generated and new FUEL CHEM customer units added, the marketplace acceptance for Fuel Tech’s patented TIFI™ Targeted In-Furnace Injection™ technology remains strong, which represent the largest market opportunity for the technology.
Cost of sales as a percentage of revenue for the three months ended June 30, 2010 and 2009 was 59% and 55%, respectively. The cost of sales percentage for the APC technology segment increased to 65% from 51% in the comparable prior-year period, primarily due to the mix of lower margin products within the technology segment. For the FUEL CHEM technology segment, the cost of sales percentage decreased to 52% from 58% for the comparable prior-year quarter. This decrease was primarily due to international demonstration costs that were incurred in the second quarter of 2009.
Cost of sales as a percentage of revenue for the six months ended June 30, 2010 and 2009 was 56% and 60%, respectively. The cost of sales percentage for the APC technology segment increased from 61% to 65%. For the FUEL CHEM technology segment, the cost of sales percentage decreased to 49% from 59% for the comparable six-month quarter. This decrease was primarily due to recognition of a one time risk share payment for a substantial demonstration program recognized in the first quarter of 2010 from a demonstration program completed in 2009.
Selling, general and administrative expenses (SG&A) for the quarters ended June 30, 2010 and 2009 were $8,018 and $8,876, respectively. Of the $858 decrease in SG&A for the quarter versus the prior year, $603 is related to stock compensation expense, while $360 is related to the reallocation of resources within the company. Of the $1,632 increase in SG&A expenses for the six-month period ended June 30, 2009, $1,655 is relates to the aforementioned reasons.
Research and development (R&D) expenses for the three months ended June 30, 2010 and 2009 were $165 and $77, respectively, while R&D expenditures for the six months ended June 30, 2010 and 2009 were $311 and $231, respectively. The Company’s increased expenses are due to an increased effort in expanding it’s offerings on the FUEL CHEM technology segment
Interest expense for the three- and six-month periods ended June 30, 2010 of $33 and $77, respectively, is due to borrowings for the Beijing Fuel Tech Facility. A portion of the borrowings was repaid during the second quarter of 2010.
The income tax benefit for the three- and six-month periods ended June 30, 2010 and 2009 were $237 and $188 and $95 and $1,229, respectively, reflecting the Company’s pre-tax loss position, respectively.
Liquidity and Sources of Capital
At June 30, 2010, Fuel Tech had cash and cash equivalents, short-term investments and restricted cash on hand of $21,066 and working capital of $33,366 versus $20,965 and $30,578 at December 31, 2009, respectively.
Operating activities provided $1,327of cash during the six-month period ended June 30, 2010, primarily due to the add back of non-cash items including stock compensation expense of $2,519, depreciation expense of $1,626, amortization expense of $443, and an increase in other noncurrent liabilities of $2,097. Partially offsetting these items was a decrease in income tax provision of $887 and $4,434 in accounts receivable.
Investing activities used cash of $442 during the six months ended June 30, 2010, the majority of which was used for capital expenditures, primarily to support and enhance the operations of the FUEL CHEM technology segment.
On June 30, 2009, Fuel Tech entered into a $25,000 revolving credit facility (the Facility) with JPMorgan Chase Bank, N.A (JPM Chase). The Facility has a term of two years through June 30, 2011, is unsecured, bears interest at a rate of LIBOR plus a spread range of 250 basis points to 375 basis points, as determined under a formula related to the Company’s leverage ratio, and has the Company’s Italian subsidiary, Fuel Tech S.r.l., as a guarantor. Fuel Tech can use this Facility for cash advances and standby letters of credit. As of June 30, 2010, there were no outstanding borrowings on this Facility.
At its inception, the Facility contained several debt covenants with which the Company must comply on a quarterly or annual basis, including: an annual capital expenditure limit of $10,000 and a minimum net income for the quarterly period ended September 31, 2009 of $750. For subsequent periods, the Facility covenants included an annual capital expenditure limited of $10,000, a maximum funded debt to EBITDA ratio of 2.75:1.0 for the quarterly period ended June 30, 2010 and a maximum funded debt to EBITDA ratio of 1.5:1.0 for all succeeding quarterly periods until the facility expires. Maximum funded debt is defined as all borrowed funds, outstanding standby letters of credit and bank guarantees. EBITDA includes after tax earnings with add backs for interest expense, income taxes, and depreciation and amortization expenses. In addition, the Company must maintain a minimum tangible net worth of $42,000, adjusted upward for 50% of net income generated and 100% of all capital issuances.
As of June 30, 2010, the Company was in compliance with all debt covenants of the Facility, including a year-to-date capital expenditure amount of $642 and a tangible net worth amount of $53,174 which was above the required amount of $50,262 by $2,912.
Beijing Fuel Tech Environmental Technologies Company, Ltd. (Beijing Fuel Tech), a wholly-owned subsidiary of Fuel Tech, has a revolving credit facility (the China Facility) agreement with JPM Chase for RMB 45 million (approximately $6,600), which expires on June 30, 2011. The facility is unsecured, bears interest at a rate of 120% of the People’s Bank of China (PBOC) Base Rate and does not contain any material debt covenants. Beijing Fuel Tech can use this facility for cash advances and bank guarantees. As of June 30, 2010, Beijing Fuel Tech has borrowings outstanding in the amount $2,203, which bears interest at 5.8% .
At June 30, 2010, the Company had outstanding standby letters of credit and bank guarantees, predominantly to customers, totaling approximately $1,299 in connection with contracts in process. Fuel Tech is committed to reimbursing the issuing bank for any payments made by the bank under these instruments. At June 30, 2010, there were no cash borrowings under the revolving credit facility and approximately $23,701 was available.
In the event of default on either the Facility or the China Facility, the cross default feature in each allows the lending bank to accelerate the payment of any amounts outstanding and may, under certain circumstances, allow the bank to cancel the facility. If the Company were unable to obtain a waiver for a breach of covenant and the bank accelerated the payment of any outstanding amounts, such acceleration may cause the Company’s cash position to deteriorate or, if cash on hand were insufficient to satisfy the payment due, may require the Company to obtain alternate financing to satisfy the accelerated payment.
The Company utilized cash from financing activities during the three months ended June 30, 2010 of $667, primarily from the repayment of a portion of the debt outstanding for the China facility. Offsetting this amount was $50 from non cash stock based compensation from the issuance of directors’ deferred shares of stock.
In the opinion of management, Fuel Tech’s expected near-term revenue growth will be driven by the timing of penetration of the coal-fired utility marketplace via utilization of its TIFI technology, by utility and industrial entities’ adherence to the NOx reduction requirements of the various domestic environmental regulations, and by the expansion of both business segments in non-U.S. geographies. Fuel Tech expects its liquidity requirements to be met by the operating results generated from these activities.
Contingencies and Contractual Obligations
Fuel Tech issues a standard product warranty with the sale of its products to customers as discussed in Note K. The change in the warranty liability balance during the three months ended June 30, 2010 was not material.
Forward-Looking Statements
This Quarterly Report on Form 10-Q contains “forward-looking statements,” as defined in Section 21E of the Securities Exchange Act of 1934, as amended, which are made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995 and reflect Fuel Tech’s current expectations regarding future growth, results of operations, cash flows, performance and business prospects, and opportunities, as well as assumptions made by, and information currently available to, our management. Fuel Tech has tried to identify forward-looking statements by using words such as “anticipate,” “believe,” “plan,” “expect,” “estimate,” “intend,” “will,” and similar expressions, but these words are not the exclusive means of identifying forward-looking statements. These statements are based on information currently available to Fuel Tech and are subject to various risks, uncertainties, and other factors, including, but not limited to, those discussed in Fuel Tech’s Annual Report on Form 10-K for the year ended December 31, 2009 in Item 1A under the caption “Risk Factors,” which could cause Fuel Tech’s actual growth, results of operations, financial condition, cash flows, performance and business prospects and opportunities to differ materially from those expressed in, or implied by, these statements. Fuel Tech undertakes no obligation to update such factors or to publicly announce the results of any of the forward-looking statements contained herein to reflect future events, developments, or changed circumstances or for any other reason. Investors are cautioned that all forward-looking statements involve risks and uncertainties, including those detailed in Fuel Tech’s filings with the Securities and Exchange Commission.
Market risk
As filed, 709 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.
Foreign Currency Risk Management
Fuel Tech’s earnings and cash flow are subject to fluctuations due to changes in foreign currency exchange rates. We do not enter into foreign currency forward contracts nor into foreign currency option contracts to manage this risk due to the immaterial nature of the transactions involved.
Fuel Tech is also exposed to changes in interest rates primarily due to its long-term debt arrangement (refer to Note I to the consolidated financial statements). A hypothetical 100 basis point adverse move in interest rates along the entire interest rate yield curve would not have a materially adverse effect on interest expense during the upcoming year ended December 31, 2010.
Controls and procedures
As filed, 805 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.
Fuel Tech maintains disclosure controls and procedures and internal controls designed to ensure (a) that information required to be disclosed in Fuel Tech’s filings under the Securities Exchange Act of 1934 is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms, and (b) that such information is accumulated and communicated to management, including the principal executive and financial officer, as appropriate to allow timely decisions regarding required disclosure.
There has been no change in the Company’s internal control over financial reporting during the quarter covered by this report that has materially affected, or is reasonably likely to materially affect, its internal control over financial reporting.
Risk factors
As filed, 128 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.
The risk factors included in our Annual Report on Form 10-K for fiscal year ended December 31, 2009 have not materially changed.
Source: SEC EDGAR, the filing index for accession 0000950123-10-074664. Last ingested by Listed: Nov 3, 2026, 20:38 ET. Listed shows no prices and gives no investment advice.