Listed

Strattec Security Corp: Form 10-Q for the period ended Oct 2, 2011

Filed with the SEC on Nov 10, 2011 and accepted by EDGAR at Nov 10, 2011, 16:05 ET.

Share

Management's discussion and analysis

As filed, 50,906 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

MANAGEMENT’S DISCUSSION AND ANALYSIS

OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

The following Management’s Discussion and Analysis should be read in conjunction with STRATTEC SECURITY CORPORATION’s accompanying Condensed Consolidated Financial Statements and Notes thereto and its 2011 Annual Report which was filed with the Securities and Exchange Commission as an exhibit to its Form 10-K on September 8, 2011. Unless otherwise indicated, all references to years refer to fiscal years.

Analysis of Results of Operations

Three months ended October 2, 2011 compared to the three months ended September 26, 2010

Net sales for the three months ended October 2, 2011 were $66.4 million compared to net sales of $59.8 million for the three months ended September 26, 2010. Sales to our largest customers overall increased in the current quarter compared to the prior year quarter levels due to higher customer vehicle production volumes. Sales to Chrysler Group LLC were $19.8 million in the current quarter compared to $19.6 million in the prior year quarter. Sales to General Motors Company were $16.1 million in the current quarter compared to $14.8 million in the prior year quarter. Included in the prior quarter sales to General Motors were $1.7 million of sales to Nexteer Automotive, which was then owned by General Motors. Sales to Ford Motor Company increased to $8.3 million in the current quarter compared to $5.5 million in the prior year quarter. Sales to Hyundai/Kia were $3.8 million in the current quarter compared to $4.3 million in the prior year quarter.

Gross profit as a percentage of net sales was 17.3 percent in the current quarter compared to 17.0 percent in the prior year quarter. The higher gross profit margin was primarily the result of higher customer vehicle production volumes compared to the prior year quarter which resulted in more favorable absorption of fixed manufacturing costs. This was partially offset, with respect to the current quarter, by a less favorable product content sales mix, higher purchased raw material costs for zinc and brass, and an unfavorable Mexican peso to U.S. dollar exchange rate affecting the U.S. dollar cost of our Mexican operations for most of the quarter. The average zinc price paid per pound increased to $1.07 in the current quarter from $0.97 in the prior year quarter. During the current quarter, we used approximately 2.7 million pounds of zinc. This resulted in increased zinc costs of approximately $275,000 in the current quarter compared to the prior year quarter. The average brass price paid per pound increased to $4.40 in the current quarter from $3.67 in the prior year quarter. During the current quarter, we used approximately 220,000 pounds of brass. This resulted in increased brass costs of approximately $160,000 in the current quarter compared to the prior year quarter. The average U.S. dollar/Mexican peso exchange rate decreased to approximately 12.36 pesos to the dollar in the current quarter from approximately 12.76 pesos to the dollar in the prior year quarter. This resulted in increased costs related to our Mexican operations of approximately $335,000 in the current quarter over the prior year quarter.

Engineering, selling and administrative expenses were $8.2 million in both the current quarter and the prior year quarter.

Our income from operations in the current quarter was $3.3 million compared to $2.0 million in the prior year quarter. This change was primarily the result of the increase in sales and gross profit margin as discussed above.

Equity loss of joint ventures was $120,000 during the current quarter compared to equity earnings of $422,000 in the prior year quarter. During the current quarter our joint ventures in China and Brazil both incurred relocation costs associated with moves to new facilities and start-up costs associated with a new product line. Both of these items caused STRATTEC to incur an equity loss from joint ventures in the current quarter compared to the prior year quarter equity earnings from joint ventures. We anticipate these transition costs to continue over most of the remaining fiscal year.

Net other expense was $868,000 in the current quarter compared to net other income of $199,000 in the prior year quarter. This change was primarily due to an unrealized loss on Mexican peso option contracts of $2.3 million in the current quarter and foreign currency transaction gains resulting from foreign currency transactions entered into by our Mexican subsidiaries of $1.7 million in the current quarter. Foreign currency transaction losses totaled $31,000 in the prior year quarter. The Mexican peso option contracts were not in place during the prior year quarter. In September of the current quarter, the Mexican peso devalued significantly to the U.S. dollar creating both foreign currency transaction gains and unrealized losses on our Mexican peso currency option contracts. Our objective in entering into these currency option contracts is to minimize our earnings volatility resulting from changes in exchange rates affecting the U.S. dollar cost of our Mexican operations. The unrealized losses recognized in the current quarter result from mark-to-market adjustments as of October 2, 2011 and may or may not be realized, depending on actual Mexican peso to U.S. dollar exchange rates experienced during the balance of the fiscal year. In addition, losses related to our Rabbi Trust totaled $241,000 in the current quarter compared to gains of $124,000 in the prior year quarter. The Rabbi Trust funds our supplemental executive retirement plan. The investments held in the Trust are considered trading securities.

Our income tax provision for each of the three month periods ended October 2, 2011 and September 26, 2010 was impacted by a lower effective and statutory tax rate for income subject to tax in Mexico as compared to the effective and statutory tax rate for income subject to tax in the U.S. In addition, the tax provision for the three month period ended October 2, 2011 was further impacted by the higher U.S. effective tax rate being applied to pre-tax U.S. losses and the lower Mexican tax rate being applied to pre-tax income in Mexico.

Liquidity and Capital Resources

Our primary source of cash flow is from our major customers, which include General Motors Company, Ford Motor Company, and Chrysler Group LLC. As of the date of filing this Form 10-Q with the Securities and Exchange Commission, all of our customers are making payments on their outstanding accounts receivable in accordance with the payment terms included on their purchase orders. A summary of our outstanding receivable balances from our major customers as of October 2, 2011 is as follows (in thousands of dollars):

General Motors $7,914
Ford 4,892
Chrysler 12,896

Cash flow used in operating activities was $208,000 during the three months ended October 2, 2011 compared to cash flow used in operating activities of $2.3 million during the three months ended September 26, 2010. The change in cash flow used in operating activities was mostly impacted by an improvement in our overall financial results. Net income adjusted for non-cash items such as depreciation, unrealized losses on foreign currency contracts and foreign currency transactions gains and losses increased approximately $1.4 million in the current year period as compared to the prior year period. Current period operating cash flow was impacted by an August 2011 payment of approximately $4.3 million in bonuses, which were earned during fiscal 2011 under our incentive bonus plans. Bonus payments totaled approximately $5 million in the prior year period. No pension contributions were made during the current or prior year periods.

Capital expenditures during the current year period totaled $3.5 million compared to $1.8 million in the prior year period. We anticipate that capital expenditures will be approximately $8 million in fiscal 2012, primarily relating to expenditures in support of requirements for new product programs and the upgrade and replacement of existing equipment.

On February 26, 2009, our Board of Directors took action to suspend payment of our $0.15 per common share quarterly dividend to conserve cash. On August 4, 2010, our Board of Directors declared a special one-time cash dividend of $1.20 per common share payable on October 29, 2010 to shareholders of record on October 8, 2010. The special dividend totaled approximately $4.0 million and was funded with current cash balances. Although we believe the outlook for our business is generally positive, the uncertain strength of economic recovery in North America, and the effect that this and the recent restructuring of our two largest customers may have on STRATTEC have resulted in both management and our Board being cautious about reinstating our regular dividend at the rate in place prior to the dividend suspension. However, our Board of Directors, on August 23, 2011, decided to reinstate our regular quarterly dividend by declaring a quarterly cash dividend of $0.10 per common share that was paid on September 30, 2011 to shareholders of record as of September 15, 2011. The quarterly dividend totaled approximately $335,000, and is expected to equal approximately $1.4 million annually, all of which was and is expected to be funded by current cash balances.

Our Board of Directors has authorized a stock repurchase program to buy back outstanding shares of our common stock. Shares authorized for buy back under the program totaled 3,839,395 at October 2, 2011. A total of 3,655,322 shares have been repurchased as of October 2, 2011, at a cost of approximately $136.4 million. No shares were repurchased during the three months ended October 2, 2011. Additional repurchases may occur from time to time and are expected to continue to be funded by cash flow from operations and current cash balances. Based on the current economic environment and our preference to conserve cash for other uses, we anticipate minimal or no stock repurchase activity for the remainder of fiscal year 2012.

We have a $25 million secured revolving credit facility (“Credit Facility”) with BMO Harris Bank N.A. The Credit Facility expires August 1, 2014. Interest on borrowings under the Credit Facility is at varying rates based, at our option, on the London Interbank Offering Rate plus one percent or the bank’s prime rate. The Credit Facility contains a restrictive financial covenant that requires us to maintain a minimum net worth level. There were no outstanding borrowings under the Credit Facility at October 2, 2011 or September 26, 2010. We had no borrowings under any third party debt facilities during the three months ended October 2, 2011 or September 26, 2010. We believe that the Credit Facility is adequate, along with existing cash balances and cash flow from operations, to meet our anticipated capital expenditure, working capital, dividend and operating expenditure requirements.

Over the past several years, we have been impacted by rising health care costs, which have increased our cost of associate medical coverage. A portion of these increases have been offset by plan design changes and associate wellness initiatives. We have also been impacted by increases in the market price of zinc and brass and inflation in Mexico, which impacts the U. S. dollar costs of our Mexican operations. We have negotiated raw material price adjustments clauses with certain, but not all, of our customers to offset some of the market price fluctuations in the cost of zinc. Beginning in January 2011, we entered into agreements with Bank of Montreal that provide for two weekly Mexican peso currency option contracts for a portion of our weekly estimated peso denominated operating costs. Current contracts with Bank of Montreal extend through June 28, 2013. The two weekly option contracts are for equivalent notional amounts. The contracts that are currently effective and expire July 6, 2012 provide for the purchase of Mexican pesos at a U.S. dollar / Mexican peso exchange rate of 11.85 if the spot rate at the weekly expiry date is below 11.85 or for the purchase of Mexican pesos at a U.S. dollar / Mexican peso exchange rate of 12.85 if the spot rate at the weekly expiry date is above 12.85. Additional contracts that are effective July 6, 2012 through June 28, 2013 provide for the purchase of Mexican pesos at an average U.S. dollar / Mexican peso exchange rate of 12.40 if the spot rate at the weekly expiry date is below an average of 12.40 or for the purchase of Mexican pesos at an average U.S. dollar / Mexican peso exchange rate of 13.40 if the spot rate at the weekly expiry date is above an average of 13.40. Our objective in entering into these currency option contracts is to minimize our earnings volatility resulting from changes in exchange rates affecting the U.S. dollar cost of our Mexican operations. The Mexican peso option contracts are not used for speculative purposes and are not designated as hedges, and as a result, all currency option contracts are recognized in our accompanying condensed consolidated financial statements at fair value and changes in the fair value of the currency option contracts are reported in current earnings as part of Other (Expense) Income, net. The premiums to be paid and received under the weekly Mexican peso currency option contracts net to zero, and as a result, premiums related to the contracts did not impact our earnings.

The following table quantifies the outstanding Mexican peso currency option contracts as of October 2, 2011 (thousands of dollars):

Contracts Effective October 2, 2011 — July 6, 2012 Notional Amount Average Option Contractual Exchange Rate Fair Value Foreign Exchange Gain/(Loss) From: 10% Appreciation of U.S. Dollar 10% Depreciation of U.S. Dollar
Buy MXP/Sell USD $10,592 11.85 $47 $(39) $215
Buy MXP/Sell USD $10,592 12.85 $(1,074) $(733) $541
Contracts Effective July 6, 2012 — June 28, 2013
Buy MXP/Sell USD $10,200 12.40 $328 $(207) $453
Buy MXP/Sell USD $10,200 13.40 $(1,361) $(494) $389

15

The fair market value of all outstanding Mexican peso option contracts in the accompanying Condensed Consolidated Balance Sheets was as follows (thousands of dollars):

Not Designated as Hedging Instruments: Other Current Liabilities: October 2, 2011 September 26, 2010
Mexican Peso Option Contracts $1,256 $—
Other Long-Term Liabilities
Mexican Peso Option Contracts $804 $—

The pre-tax effects of the Mexican peso option contracts on the accompanying Condensed Consolidated Statements of Operations and Comprehensive Income (Loss) for the three months ended October 2, 2011 and September 26, 2010 consisted of the following (thousands of dollars):

Not Designated as Hedging Instruments: Other (Expense) Income, net October 2, 2011 September 26, 2010
Mexican Peso Option Contracts — Realized Gain $18 $—
Mexican Peso Option Contracts — Realized Loss $(14) $—
Mexican Peso Option Contracts — Unrealized Loss $(2,305) $—

Joint Ventures

We participate in certain Alliance Agreements with WITTE Automotive (“WITTE”) and ADAC Automotive (“ADAC”). WITTE, of Velbert, Germany, is a privately held automotive supplier. WITTE designs, manufactures and markets automotive components, including locks and keys, hood latches, rear compartment latches, seat back latches, door handles and specialty fasteners. WITTE’s primary market for these products has been Europe. ADAC, of Grand Rapids, Michigan, is a privately held automotive supplier and manufactures engineered products, including door handles and other automotive trim parts, utilizing plastic injection molding, automated painting and various assembly processes.

The Alliance agreements include a set of cross-licensing agreements for the manufacture, distribution and sale of WITTE products by STRATTEC and ADAC in North America, and the manufacture, distribution and sale of STRATTEC and ADAC products by WITTE in Europe. Additionally, a joint venture company, Vehicle Access Systems Technology LLC (“VAST LLC”), in which WITTE, STRATTEC and ADAC each hold a one-third interest, exists to seek opportunities to manufacture and sell the companies’ products in areas of the world outside of North America and Europe.

VAST do Brasil, a joint venture between VAST LLC and Ifer do Brasil Ltda., services customers in South America. VAST Fuzhou, VAST Great Shanghai and VAST Shanghai Co. (collectively known as VAST China), provides a base of operations to service our automotive customers in the Asian market. VAST LLC also maintains branch offices in South Korea and Japan in support of customer sales and engineering requirements.

The VAST LLC investments are accounted for using the equity method of accounting. The activities related to the VAST LLC joint ventures resulted in equity loss of joint ventures to STRATTEC of approximately $120,000 during the three months ended October 2, 2011 and equity earnings of joint ventures to STRATTEC of approximately $422,000 during the three months ended September 26, 2010. No capital contributions were made to VAST LLC during the current or prior year quarters.

In fiscal year 2007, we entered into a joint venture with ADAC forming ADAC-STRATTEC LLC, a Delaware limited liability company. The joint venture was created to establish injection molding and door handle assembly operations in Mexico. STRATTEC originally held a 50.1 percent interest in ADAC-STRATTEC LLC. Effective June 28, 2010, STRATTEC purchased an additional .9 percent interest from ADAC and now owns 51 percent. A Mexican entity, ADAC-STRATTEC de Mexico, exists and is wholly owned by ADAC-STRATTEC LLC. ADAC-STRATTEC LLC’s financial results are consolidated with the financial results of STRATTEC and resulted in increased net income to STRATTEC of approximately $311,000 during the three months ended October 2, 2011 and approximately $55,000 during the three months ended September 26, 2010.

Effective November 30, 2008, STRATTEC established a new entity, STRATTEC POWER ACCESS LLC (“SPA”), which is 80 percent owned by STRATTEC and 20 percent owned by WITTE. SPA operates the North American portion of the Power Products business which was acquired from Delphi Corporation. The financial results of SPA are consolidated with the financial results of STRATTEC and resulted in increased net income to STRATTEC of approximately $580,000 during the three months ended October 2, 2011 and decreased net income to STRATTEC of approximately $628,000 for the three months ended September 26, 2010.

Other Matters

Health care reform legislation was recently enacted by the Federal government. We are currently evaluating the legislation to determine its effects on our plan structure, future operating results and financial position.

Critical Accounting Policies

The Company believes the following represents its critical accounting policies:

Pension and Postretirement Health Benefits — Pension and postretirement health obligations and costs are developed from actuarial valuations. The determination of the obligation and expense for pension and postretirement health benefits is dependent on the selection of certain assumptions used by actuaries in calculating such amounts. Those assumptions are described in the Notes to Financial Statements in our 2011 Annual Report and include, among others, the discount rate, expected long-term rate of return on plan assets, retirement age and rates of increase in compensation and health care costs. We evaluate and update all of the assumptions annually on June 30, the measurement date. Actual results that differ from these assumptions are deferred and, under certain circumstances, amortized over future periods. While we believe that the assumptions used are appropriate, significant differences in the actual experience or significant changes in the assumptions may materially affect our pension and postretirement health obligations and future expense related to these obligations. Refer to the discussion of Critical Accounting Policies included in the Management’s Discussion and Analysis and Retirement Plans and Postretirement Costs included in the Notes to Financial Statements in our 2011 Annual Report filed with the Securities and Exchange Commission as an exhibit to our Form 10-K on September 8, 2011.

Other Reserves — We have reserves such as an environmental reserve, a warranty reserve, an incurred but not reported claim reserve for self-insured health plans, an allowance for doubtful accounts related to trade accounts receivable, an excess and obsolete inventory reserve and a repair and maintenance supply parts reserve. These reserves require the use of estimates and judgment with regard to risk exposure, ultimate liability and net realizable value.

Environmental Reserve — We have a liability recorded related to the estimated costs to remediate an environmental contamination site at our Milwaukee facility, which was contaminated by a solvent spill from a former above ground solvent storage tank occurring in 1985. The recorded environmental liability balance involves judgment and estimates. Our reserve estimate is based on a third party assessment of the costs to adequately cover the cost of active remediation of the contamination at this site. Actual costs might vary from this estimate for a variety of reasons, including changes in laws and changes in the assessment of the level of remediation actually required at this site. Therefore, future changes in laws or the assessment of the level of remediation required could result in changes in our estimate of the required liability. Refer to the discussion of Commitments and Contingencies included in the Notes to Financial Statements in our 2011 Annual Report filed with the Securities and Exchange Commission as an exhibit to our Form 10-K on September 8, 2011.

Warranty Reserve — We have a warranty liability recorded related to our exposure to warranty claims in the event our products fail to perform as expected, and we may be required to participate in the repair costs incurred by our customers for such products. The recorded warranty liability balance involves judgment and estimates. Our liability estimate is based on an analysis of historical warranty data as well as current trends and information, including our customers’ recent extension of their warranty programs. Actual warranty costs might vary from estimates due to the level of actual claims varying from our claims experience and estimates. Therefore, future actual claims experience could result in changes in our estimates of the required liability. Refer to the discussion of Warranty Reserve under Organization and Summary of Significant Accounting Policies included in the Notes to Financial Statements in our 2011 Annual Report filed with the Securities and Exchange Commission as an exhibit to our Form 10-K on September 8, 2011.

Incurred But Not Reported Claim Reserve for Self-Insured Health Plans — We have self-insured medical and dental plans covering all eligible U.S. associates. The expected ultimate cost of claims incurred under these plans is subject to judgment and estimation. We estimate the ultimate expected cost of claims incurred under these plans based upon the aggregate liability for reported claims and an estimated additional liability for claims incurred but not reported. Our estimate of claims incurred but not reported is based on an analysis of historical data, current trends related to claims and health care costs and information available from the insurance carrier. Actual ultimate costs may vary from estimates due to variations in actual claims experience from past trends and large unexpected claims being filed. Therefore, changes in claims experience and large unexpected claims could result in changes to our estimate of the claims incurred but not reported liabilities. Refer to the discussion of Self Insurance and Loss Sensitive Plans under Organization and Summary of Significant Accounting Policies included in Notes to Financial Statements in our 2011 Annual Report filed with the Securities and Exchange Commission as an exhibit to our Form 10-K on September 8, 2011.

Allowance for Doubtful Accounts Related to Trade Accounts Receivable — Our trade accounts receivable consist primarily of receivables due from Original Equipment Manufacturers in the automotive industry and locksmith distributors relating to our service and aftermarket business. Our evaluation of the collectibility of our trade accounts receivable involves judgment and estimates and includes a review of past due items, general economic conditions and the economic climate of the industry as a whole. The estimate of the required reserve involves uncertainty as to future collectibility of receivable balances. This uncertainty is magnified by the financial difficulty currently experienced by our customers as discussed under Risk-Factors-Loss of Significant Customers, Vehicle Content, Vehicle Models and Market Share included in the Management’s Discussion and Analysis in our 2011 Annual Report filed with the Securities and Exchange Commission as an exhibit to our Form 10-K on September 8, 2011. Also, refer to the discussion of Receivables under Organization and Summary of Significant Accounting Policies included in Notes to Financial Statements in our 2011 Annual Report filed with the Securities and Exchange Commission as an exhibit to our Form 10-K on September 8, 2011.

Excess and Obsolete Production Inventory Reserve — We record a reserve for excess and obsolete production inventory based on historical and estimated future demand and market conditions. The reserve level is determined by comparing inventory levels of individual materials and parts to historical usage and estimated future sales by analyzing the age of the inventory, in order to identify specific material and parts that are unlikely to be sold. Technical obsolescence and other known factors are also considered in evaluating the reserve level. Actual future write-offs of inventory may differ from estimates and calculations used to determine reserve levels due to changes in customer demand, changes in technology and other factors. Refer to the discussion of Inventories under Organization and Summary of Significant Accounting Policies included in the Notes to Financial Statements in our 2011 Annual Report filed with the Securities and Exchange Commission as an exhibit to our Form 10-K on September 8, 2011.

Repair and Maintenance Supply Parts Reserve — We maintain an inventory of repair and maintenance parts in support of operations. The inventory includes critical repair parts for all production equipment as well as general maintenance items. The inventory of critical repair parts is required to avoid disruptions in our customers’ just-in-time production schedules due to lack of spare parts when equipment break-downs occur. Depending on maintenance requirements during the life of the equipment, excess quantities of repair parts arise. A repair and maintenance supply parts reserve is maintained to recognize the normal adjustment of inventory for obsolete and slow-moving repair and maintenance supply parts. Our evaluation of the reserve level involves judgment and estimates, which are based on a review of historical obsolescence and current inventory levels. Actual obsolescence may differ from estimates due to actual maintenance requirements differing from historical levels. This could result in changes to our estimated required reserve. Refer to the discussion of Repair and Maintenance Supply Parts under Organization and Summary of Significant Accounting Policies included in the Notes to Financial Statements in our 2011 Annual Report filed with the Securities and Exchange Commission as an exhibit to our Form 10-K on September 8, 2011.

We believe the reserves discussed above are estimated using consistent and appropriate methods. However, changes to the assumptions could materially affect the recorded reserves.

Stock-Based Compensation — Stock-based compensation cost is measured at the grant date based on the value of the award and is recognized as expense over the vesting period of the award. Determining the fair value of stock-based awards at the grant date requires judgment, including estimating future volatility of our stock, the amount of stock-based awards that are expected to be forfeited and the expected term of awards granted. We estimate the fair value of stock options granted using the Black-Scholes option valuation model. We amortize the fair value of all awards on a straight-line basis over the vesting periods for the awards. The expected term of awards granted represents the period of time they are expected to be outstanding. We determine the expected term based on historical experience with similar awards, giving consideration to the contractual terms and vesting schedules. We estimate the expected volatility of our common stock at the date of grant based on the historical volatility of our common stock. The volatility factor used in the Black-Scholes option valuation model is based on our historical stock prices over the most recent period commensurate with the estimated expected term of the award. We base the risk-free interest rate used in the Black-Scholes option valuation model on the implied yield currently available on U.S. Treasury zero-coupon issues with a remaining term commensurate with the expected term of the award. We use historical data to estimate pre-vesting option forfeitures. We record stock-based compensation only for those awards that are expected to vest. If actual results differ significantly from these estimates, stock-based compensation expense and our results of operations could be materially impacted.

Risk Factors

We recognize we are subject to the following risk factors based on our operations and the nature of the automotive industry in which we operate:

Loss of Significant Customers, Vehicle Content, Vehicle Models and Market Share — Sales to General Motors Company, Ford Motor Company and Chrysler Group LLC represented approximately 66 percent of our annual net sales (based on fiscal 2011 results) and, accordingly, these customers account for a significant percentage of our outstanding accounts receivable. The contracts with these customers provide for supplying the customer’s requirements for a particular model. The contracts do not specify a specific quantity of parts. The contracts typically cover the life of a model, which averages approximately four to five years. Components for certain customer models may also be “market tested” annually. Therefore, the loss of any one of these customers, the loss of a contract for a specific vehicle model, a reduction in vehicle content, the early cancellation of a specific vehicle model, technological changes or a significant reduction in demand for certain key models could occur, and if so, could have a material adverse effect on our existing and future revenues and net income.

On April 27, 2009, General Motors announced certain aspects of its Revised Viability Plan including assembly plant closures and reduced production volumes for calendar year 2009 and the subsequent five years. The announcement indicated that certain vehicle brands, including Pontiac, Saturn, Hummer and Saab, would be discontinued or sold. In addition, subsequent to Chrysler LLC’s filing for Chapter 11 bankruptcy protection on April, 30 2009, they announced certain vehicle models planned for discontinuation (Jeep Commander, Jeep Compass, Jeep Patriot, Dodge Nitro, Dodge Avenger, Dodge Caliber, Dodge Durango, Dodge Dakota, Dodge Viper, Chrysler Sebring, Chrysler Aspen, etc.). Subsequently, most of the models were reaffirmed for continued production over a two to three year period, or replaced during this period. We continue to evaluate the impact these evolving plans have on our business as more details become available.

Our major customers also have significant under-funded legacy liabilities related to pension and postretirement health care obligations. The future impact of these items along with a continuing loss in our majority customers’ North American automotive market share to the “New Domestic” automotive manufacturers (primarily the Japanese automotive manufacturers) and/or a significant decline in the overall market demand for new vehicles may ultimately result in severe financial difficulty for these customers, including bankruptcy. If our major customers cannot fund their operations, we may incur significant write-offs of accounts receivable, incur impairment charges or require additional restructuring actions. For example, on October 8, 2005, Delphi Corporation filed for Chapter 11 bankruptcy protection. As a result, we wrote-off $1.6 million of uncollectible accounts receivable due from Delphi Corporation. This directly reduced our pre-tax net income during fiscal 2006. On April 30, 2009 and on June 1, 2009, each of Chrysler LLC and General Motors Corporation, respectively, filed for Chapter 11 bankruptcy protection for certain of their U.S. legal entities. During fiscal 2009, we recorded a provision for bad debts of $500,000 related to these filings, of which we subsequently recovered $421,000 of the $500,000 provision during fiscal 2010. This directly reduced our pre-tax net income during fiscal 2009 by $500,000 and increased our pre-tax income during fiscal 2010 by $421,000.

Production Slowdowns by Customers — Our major customers and many of their suppliers were significantly impacted by the recession of 2008/2009. Many of our major customers instituted production cuts during our fiscal 2009 and 2010. Moreover, certain of our major customers announced plans to continue these production cuts into future fiscal years. For example, during April 2009, General Motors Corporation announced assembly plant downtime for the months of May through July in order to reduce excess inventories at their dealer locations. Consequently, this downtime reduced our production schedules and affected both our sales and profitability for our fiscal fourth quarter ending June 28, 2009 and our fiscal 2010 first quarter ending September 27, 2009. Additionally, on April 27, 2009, General Motors announced some aspects of its Revised Viability Plan including assembly plant closures and reduced production volumes for the remainder of calendar 2009 and the subsequent five calendar years. While production subsequently increased after the cuts made in 2009, additional economic slowdowns could bring about new production cuts which could have a material adverse effect on our existing and future revenues and net income.

Financial Distress of Automotive Supply Base — During calendar years 2009 and 2010, the automotive industry conditions adversely affected STRATTEC and our supply base. Lower production levels at our major customers, volatility in certain raw material and energy costs and the global credit market crisis resulted in severe financial distress among many companies within the automotive supply base. During the above time frame, several automotive suppliers filed for bankruptcy protection or ceased operations. The potential continuation of financial distress within the supply base and suppliers’ inability to obtain credit from lending institutions may lead to commercial disputes and possible supply chain interruptions. In addition, the potential for future and/or continued adverse industry conditions may require us to take measures to ensure uninterrupted production. The continuation or worsening of these industry conditions could have a material adverse effect on our existing and future revenues and net income.

Shortage of Raw Materials or Components Supply — In the event of a rapid increase in production demands, either we or our customers or other suppliers may experience supply shortages of raw materials or components. This could be caused by a number of factors, including a lack of production line capacity or manpower or working capital constraints. In order to manage and reduce the costs of purchased goods and services, we and others within our industry have been rationalizing and consolidating our supply base. In addition, due to the recent turbulence in the automotive industry, several suppliers have filed for bankruptcy proceedings or ceased operations. As a result, there is greater dependence on fewer sources of supply for certain components and materials, which could increase the possibility of a supply shortage of any particular component. If any of our customers experience a material supply shortage, either directly or as a result of supply shortages at another supplier, that customer may halt or limit the purchase of our products. Similarly, if we or one of our own suppliers experience a supply shortage we may become unable to produce the affected products if we cannot procure the components from another source. Such production interruptions could impede a ramp-up in vehicle production and could have a material adverse effect on our business, results of operations and financial condition.

We consider the production capacities and financial condition of suppliers in our selection process, and expect that they will meet our delivery requirements. However, there can be no assurance that strong demand, capacity limitations, shortages of raw materials or other problems will not result in any shortages or delays in the supply of components to us.

Cost Reduction — There is continuing pressure from our major customers to reduce the prices we charge for our products. This requires us to generate cost reductions, including reductions in the cost of components purchased from outside suppliers. If we are unable to generate sufficient production cost savings in the future to offset pre-programmed price reductions, our gross margin and profitability will be adversely affected.

Cyclicality and Seasonality in the Automotive Market — The automotive market is cyclical and is dependent on consumer spending, on the availability of consumer credit and, to a certain extent, on customer sales incentives. Economic factors adversely affecting consumer demand for automobiles and automotive production, such as rising fuel costs, could adversely impact our net sales and net income. We typically experience decreased sales and operating income during the first fiscal quarter of each year due to the impact of scheduled customer plant shut-downs in July and new model changeovers during that period.

Foreign Operations — We own and operate manufacturing operations in Mexico. As discussed under “Joint Ventures”, we also have joint venture investments in Mexico, Brazil and China. As these operations continue to expand, their success will depend, in part, on our and our partners’ ability to anticipate and effectively manage certain risks inherent in international operations, including: enforcing agreements and collecting receivables through certain foreign legal systems, payment cycles of foreign customers, compliance with foreign tax laws, general economic and political conditions in these countries and compliance with foreign laws and regulations.

Currency Exchange Rate Fluctuations — Our sales are denominated in U.S. dollars. We have manufacturing operations in Mexico, and as a result, a portion of our manufacturing costs are incurred in Mexican pesos. Therefore, fluctuations in the U.S. dollar / Mexican peso exchange rate may have a material effect on our profitability, cash flows and financial position, and may significantly affect the comparability of our results between financial periods. Any depreciation in the value of the U.S. dollar in relation to the value of the Mexican peso will adversely affect the cost of our Mexican operations when translated into U.S. dollars. Similarly, any appreciation in the value of the U.S. dollar in relation to the value of the Mexican peso will decrease the cost of our Mexican operations when translated into U.S. dollars. As described in Derivative Instruments included in the Notes to Financial Statements contained herein, we have entered into weekly Mexican peso currency option contracts to minimize the volatility resulting from changes in the exchange rates between the U.S. dollar and the Mexican peso. There can be no assurances that the peso currency option contracts will eliminate our exchange rate risk associated with our Mexican operations.

Sources of and Fluctuations in Market Prices of Raw Materials — Our primary raw materials are high-grade zinc, brass, nickel silver, aluminum, steel and plastic resins. These materials are generally available from a number of suppliers, but we have chosen to concentrate our sourcing with one primary vendor for each commodity or purchased component. We believe our sources of raw materials are reliable and adequate for our needs. However, the development of future sourcing issues related to using existing or alternative raw materials and the global availability of these materials as well as significant fluctuations in the market prices of these materials may have an adverse affect on our financial results if the increased raw material costs cannot be recovered from our customers.

Given the significant financial impact on us relating to changes in the cost of our primary raw materials, commencing with fiscal 2008, we began quoting quarterly material price adjustments for changes in our zinc costs in our negotiations with our customers. Our success in obtaining these quarterly price adjustments in our customer contracts is dependent on separate negotiations with each customer. It is not a standard practice for our customers to include such price adjustments in their contracts. We have been successful in obtaining quarterly price adjustments in some of our customer contracts. However, we have not been successful in obtaining the adjustments with all of our customers.

Disruptions Due to Work Stoppages and Other Labor Matters — Our major customers and many of their suppliers have unionized work forces. Work stoppages or slow-downs experienced by our customers or their suppliers could result in slow-downs or closures of assembly plants where our products are included in assembled vehicles. For example, strikes by a critical supplier called by the United Auto Workers led to extended shut-downs of most of General Motors’ North American assembly plants in February 2008 and in 1998. A material work stoppage experienced by one or more of our customers could have an adverse effect on our business and our financial results. In addition, all production associates at our Milwaukee facility are unionized. A sixteen-day strike by these associates in June 2001 resulted in increased costs as all salaried associates worked with additional outside resources to produce the components necessary to meet customer requirements. The current contract with the unionized associates is effective through June 29, 2014. We may encounter further labor disruption after the expiration date of this contract and may also encounter unionization efforts in our other plants or other types of labor conflicts, any of which could have an adverse effect on our business and our financial results. Labor contracts between General Motors Company, Ford Motor Company and Chrysler Group LLC and their unionized associates under the United Auto Workers expired on September 14, 2011. These customers recently ratified new four-year agreements with their union membership. Labor disruptions encountered after the expiration date of these new contracts could have an adverse effect on our business and our financial results.

Environmental and Safety Regulations — We are subject to Federal, state, local and foreign laws and other legal requirements related to the generation, storage, transport, treatment and disposal of materials as a result of our manufacturing and assembly operations. These laws include the Resource Conservation and Recovery Act (as amended), the Clean Air Act (as amended) and the Comprehensive Environmental Response, Compensation and Liability Act (as amended). We have an environmental management system that is ISO-14001 certified. We believe that our existing environmental management system is adequate for current and anticipated operations and we have no current plans for substantial capital expenditures in the environmental area. An environmental reserve was established in 1995 for estimated costs to remediate a site at our Milwaukee facility. The site was contaminated from a former above-ground solvent storage tank, located on the east side of the facility. The contamination occurred in 1985 and is being monitored in accordance with Federal, state and local requirements. We do not currently anticipate any material adverse impact on our results of operations, financial condition or competitive position as a result of compliance with Federal, state, local and foreign environmental laws or other related legal requirements. However, risk of environmental liability and changes associated with maintaining compliance with environmental laws is inherent in the nature of our business and there is no assurance that material liabilities or changes could not arise.

Highly Competitive Automotive Supply Industry — The automotive component supply industry is highly competitive. Some of our competitors are companies, or divisions or subsidiaries of companies, that are larger than STRATTEC and have greater financial and technology capabilities. Our products may not be able to compete successfully with the products of these other companies, which could result in loss of customers and, as a result, decreased sales and profitability. Some of our major customers have previously announced that they will be reducing their supply base. This could potentially result in the loss of these customers and consolidation within the supply base. The loss of any of our major customers could have a material adverse effect on our existing and future net sales and net income.

In addition, our competitive position in the North American automotive component supply industry could be adversely affected in the event that we are unsuccessful in making strategic acquisitions, alliances or establishing joint ventures that would enable us to expand globally. We principally compete for new business at the beginning of the development of new models and upon the redesign of existing models by our major customers. New model development generally begins two to five years prior to the marketing of such new models to the public. The failure to obtain new business on new models or to retain or increase business on redesigned existing models could adversely affect our business and financial results. In addition, as a result of relatively long lead times for many of our components, it may be difficult in the short-term for us to obtain new sales to replace any unexpected decline in the sale of existing products. Finally, we may incur significant product development expense in preparing to meet anticipated customer requirements which may not be recovered.

Program Volume and Pricing Fluctuations — We incur costs and make capital expenditures for new program awards based upon certain estimates of production volumes over the anticipated program life for certain vehicles. While we attempt to establish the price of our products for variances in production volumes, if the actual production of certain vehicle models is significantly less than planned, our net sales and net income may be adversely affected. We cannot predict our customers’ demands for the products we supply either in the aggregate or for particular reporting periods.

Investments in Customer Program Specific Assets — We make investments in machinery and equipment used exclusively to manufacture products for specific customer programs. This machinery and equipment is capitalized and depreciated over the expected useful life of each respective asset. Therefore, the loss of any one of our major customers, the loss of specific vehicle models or the early cancellation of a vehicle model could result in impairment in the value of these assets which may have a material adverse effect on our financial results.

Financial Industry / Credit Market Risk — The U.S. capital and credit markets experienced significant volatility and disruption during the 2008/2009 recession. In many cases this resulted in pressures on borrowers and reduced credit availability from certain issuers without regard to the underlying financial strength of the borrower or issuer. If financial market disruption and volatility occur again in the future, there can be no assurance that such conditions will not have an adverse effect on our ability to access debt and, in turn, result in a material adverse effect on our business, financial condition and results of operations.

Warranty Claims — We are exposed to warranty claims in the event that our products fail to perform as expected, and we may be required to participate in the repair costs incurred by our customers for such products. Our largest customers have recently extended their warranty protection for their vehicles. Other OEMs have similarly extended their warranty programs. We are engaged in ongoing discussions with our customers regarding certain warranty claims. This trend will put additional pressure on the supply base to improve quality systems. This trend may also result in higher cost recovery claims by OEMs from suppliers whose products incur a higher rate of warranty claims. Historically, we have experienced relatively low warranty charges from our customers due to our commercial arrangements and improvements in the quality, reliability and durability of our products. Due to our largest customers’ extensions of their warranty protection programs and demands for higher warranty cost sharing arrangements from their suppliers, including STRATTEC, we increased our provision to cover warranty exposures during 2010 and 2011. Moreover, in 2011, our increased warranty provision was the result of our share of the cost associated with one of our customer’s specific warranty claim involving our product. If our customers demand higher warranty-related cost recoveries, or if our products fail to perform as expected, it could have a material adverse impact on our results of operations and financial condition.

Market risk

As filed, 4,579 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Our exposure to market risk is limited to fluctuations in raw material commodity prices and foreign currency exchange rate risk associated with STRATTEC’s foreign operations. We do not utilize financial instruments for trading purposes. We have not had outstanding borrowings with third parties since December 1997. There is, therefore, currently no significant exposure to market risk for changes in interest rates. To the extent that we incur future borrowings under our line of credit, we would be subject to interest rate risk related to such borrowings. We are subject to foreign currency exchange rate exposure related to the U.S. dollar costs of our manufacturing operations in Mexico. A portion of our manufacturing costs are incurred in Mexican pesos. Our earnings and cash flows are subject to fluctuations as a result of changes in the U.S. dollar / Mexican peso exchange rate. Beginning in January 2011, we entered into agreements with Bank of Montreal that provide for two weekly Mexican peso currency option contracts for a portion of our weekly estimated peso denominated operating costs. Current contracts with Bank of Montreal extend through June 28, 2013. The two weekly option contracts are for equivalent notional amounts. The contracts that are currently effective and expire July 6, 2012 provide for the purchase of Mexican pesos at a U.S. dollar / Mexican peso exchange rate of 11.85 if the spot rate at the weekly expiry date is below 11.85 or for the purchase of Mexican pesos at a U.S. dollar / Mexican peso exchange rate of 12.85 if the spot rate at the weekly expiry date is above 12.85. Additional contracts that are effective July 6, 2012 through June 28, 2013 provide for the purchase of Mexican pesos at an average U.S. dollar / Mexican peso exchange rate of 12.40 if the spot rate at the weekly expiry date is below an average of 12.40 or for the purchase of Mexican pesos at an average U.S. dollar / Mexican peso exchange rate of 13.40 if the spot rate at the weekly expiry date is above an average of 13.40. Our objective in entering into these currency option contracts is to minimize our earnings volatility resulting from changes in exchange rates affecting the U.S. dollar cost of our Mexican operations. The Mexican peso option contracts are not used for speculative purposes and are not designated as hedges, and as a result, all currency option contracts are recognized in our accompanying condensed consolidated financial statements at fair value and changes in the fair value of the currency option contracts are reported in current earnings as part of Other (Expense) Income, net. The premiums to be paid and received under the weekly Mexican peso currency option contracts net to zero, and as a result, premiums related to the contracts did not impact our earnings.

The following table quantifies the outstanding Mexican peso currency option contracts as of October 2, 2011 (thousands of dollars):

Contracts Effective October 2, 2011 — July 6, 2012 Notional Amount Average Option Contractual Exchange Rate Fair Value Foreign Exchange Gain/(Loss) From: 10% Appreciation of U.S. Dollar 10% Depreciation of U.S. Dollar
Buy MXP/Sell USD $10,592 11.85 $47 $(39) $215
Buy MXP/Sell USD $10,592 12.85 $(1,074) $(733) $541
Contracts Effective July 6, 2012 — June 28, 2013
Buy MXP/Sell USD $10,200 12.40 $328 $(207) $453
Buy MXP/Sell USD $10,200 13.40 $(1,361) $(494) $389

The fair market value of all outstanding Mexican peso option contracts in the accompanying Condensed Consolidated Balance Sheets was as follows (thousands of dollars):

Not Designated as Hedging Instruments: Other Current Liabilities: October 2, 2011 September 26, 2010
Mexican Peso Option Contracts $1,256 $—
Other Long-Term Liabilities
Mexican Peso Option Contracts $804 $—

24

The pre-tax effects of the Mexican peso option contracts on the accompanying Condensed Consolidated Statements of Operations and Comprehensive Income (Loss) for the three months ended October 2, 2011 and September 26, 2010 consisted of the following (thousands of dollars):

Not Designated as Hedging Instruments: Other (Expense) Income, net October 2, 2011 September 26, 2010
Mexican Peso Option Contracts — Realized Gain $18 $—
Mexican Peso Option Contracts — Realized Loss $(14) $—
Mexican Peso Option Contracts — Unrealized Loss $(2,305) $—

Controls and procedures

As filed, 2,194 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

We maintain disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”)) that are designed to ensure that information required to be disclosed in the Company’s reports filed or submitted under the Exchange Act, is recorded, processed, summarized and reported within the time periods specified in the Security and Exchange Commission’s rules and forms, and that the information required to be disclosed by the Company in reports that it files or submits under the Exchange Act is accumulated and communicated to its management, including its Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure. As of the end of the period covered by this report, we carried out an evaluation, under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, of the effectiveness of the design and operation of our disclosure controls and procedures. Based on this evaluation, our Chief Executive Officer and Chief Financial Officer concluded that, as of the end of such period, our disclosure controls and procedures were effective at reaching a level of reasonable assurance. It should be noted that in designing and evaluating the disclosure controls and procedures, management recognized that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving the desired control objectives, and management necessarily was required to apply its judgment in evaluating the cost benefit relationship of possible controls and procedures. We have designed our disclosure controls and procedures to reach a level of reasonable assurance of achieving the desired control objectives.

There was no change in our internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) during our most recently completed fiscal quarter that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

Part II

Other Information

Risk factors

As filed, 294 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Please refer to the section titled “Risk Factors” herein for disclosures regarding the risks and uncertainties relating to our business. There have been no material changes to the risk factors disclosed in our Form 10-K as filed with the Securities and Exchange Commission on September 8, 2011.

Figures reported in this filing

Standardized line items from the XBRL in this filing, for the period ended 2011-10-02. Comparative periods it repeats are left out.

Figures reported in this filing
Line itemPeriodValueXBRL concept
Revenue3 months2011-07-04 to 2011-10-02$66.4mus-gaap:SalesRevenueGoodsNet
Cost of revenue3 months2011-07-04 to 2011-10-02$54.9mus-gaap:CostOfGoodsSold
Gross profit3 months2011-07-04 to 2011-10-02$11.5mus-gaap:GrossProfit
Operating income3 months2011-07-04 to 2011-10-02$3.3mus-gaap:OperatingIncomeLoss
Interest expense3 months2011-07-04 to 2011-10-02$31.0kus-gaap:InterestExpense
Income tax3 months2011-07-04 to 2011-10-02$321.0kus-gaap:IncomeTaxExpenseBenefit
Net income3 months2011-07-04 to 2011-10-02$1.3mus-gaap:NetIncomeLoss
Diluted EPS3 months2011-07-04 to 2011-10-02$0.39us-gaap:EarningsPerShareDiluted
Basic EPS3 months2011-07-04 to 2011-10-02$0.39us-gaap:EarningsPerShareBasic
Diluted shares (weighted)3 months2011-07-04 to 2011-10-023,326,000 sharesus-gaap:WeightedAverageNumberOfDilutedSharesOutstanding
Operating cash flow3 months2011-07-04 to 2011-10-02−$208.0kus-gaap:NetCashProvidedByUsedInOperatingActivities
Capital expenditure3 months2011-07-04 to 2011-10-02$3.5mus-gaap:PaymentsToAcquirePropertyPlantAndEquipment
Dividends paid3 months2011-07-04 to 2011-10-02$335.0kus-gaap:PaymentsOfDividendsCommonStock
Cash and equivalentsAt period end2011-10-02$13.2mus-gaap:CashAndCashEquivalentsAtCarryingValue
Current assetsAt period end2011-10-02$93.9mus-gaap:AssetsCurrent
Total assetsAt period end2011-10-02$148.0mus-gaap:Assets
Current liabilitiesAt period end2011-10-02$51.2mus-gaap:LiabilitiesCurrent
Shareholders' equityAt period end2011-10-02$84.5mus-gaap:StockholdersEquity
Shares outstandingAt period end2011-10-023,299,376 sharesdei:EntityCommonStockSharesOutstanding

Source: SEC EDGAR, the filing index for accession 0000950123-11-097558. Last ingested by Listed: Nov 6, 2026, 02:27 ET. Listed shows no prices and gives no investment advice.