Listed

Techprecision Corp: Form 10-Q for the period ended Dec 31, 2011

Filed with the SEC on Feb 14, 2012 and accepted by EDGAR at Feb 14, 2012, 16:25 ET.

Share

Management's discussion and analysis

As filed, 44,360 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Statement Regarding Forward Looking Disclosure

The following discussion of the results of our operations and financial condition should be read in conjunction with our consolidated financial statements and the related notes herein. This Quarterly Report on Form 10Q, including this section entitled “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” may contain predictive or “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements include, but are not limited to, statements that express our intentions, beliefs, expectations, strategies, predictions or any other statements relating to our future activities or other future events or conditions. These statements are based on current expectations, estimates and projections about our business based in part on assumptions made by management. These statements are not guarantees of future performance and involve risks, uncertainties and assumptions that are difficult to predict. Therefore, actual outcomes and results may, and probably will, differ materially from what is expressed or forecasted in the forward-looking statements due to numerous factors. Those factors include those risks discussed in this Item 2 “Management’s Discussion and Analysis of Financial Condition and Results of Operations” on this Quarterly Report on Form 10-Q and those described in any other filings which we make with the SEC. In addition, such statements could be affected by risks and uncertainties related to our ability to generate business on an on-going basis, to obtain any required financing, to receive contract awards from the competitive bidding process, maintain standards to enable us to manufacture products to exacting specifications, enter new markets for our services, marketing and customer acceptance, our reliance on a small number of customers for a significant percentage of our business, competition, government regulations and requirements, pricing and development difficulties, our ability to make acquisitions and successfully integrate those acquisitions with our business, as well as general industry and market conditions and growth rates, and general economic conditions. We undertake no obligation to publicly update or revise any forward looking statements to reflect events or circumstances that may arise after the date of this report, except as required by applicable law. Any forward-looking statements speak only as of the date on which they are made, and we do not undertake any obligation to update any forward-looking statement to reflect events or circumstances after the date of this report. Investors should evaluate any statements made by the Company in light of these important factors.

Overview

We offer a full range of services required to transform raw materials into precise finished products. Our manufacturing capabilities include: fabrication operations that involve cutting, press and roll forming, assembly, welding, heat treating, blasting and painting; and machining operations which include CNC (computer numerical controlled) horizontal and vertical milling centers. We also provide support services to our manufacturing capabilities: manufacturing engineering (planning, fixture and tooling development, manufacturing activity), quality control (inspection and testing), materials procurement, production control (scheduling, project management and expediting) and final assembly.

All manufacturing is done in accordance with our written quality assurance program, which meets specific national and international codes, standards, and specifications. Ranor holds several certificates of authorization issued by the American Society of Mechanical Engineers and the National Board of Boiler and Pressure Vessel Inspectors. The standards used are specific to the customers’ needs, and our manufacturing operations are conducted in accordance with these standards.

During the year ended March 31, 2011, demand for our services was relatively strong across all of the industries we serve. This trend continued through the third quarter of fiscal 2012. The Company concluded the year ended March 31, 2011, with an order backlog of $32.5 million. The order backlog for the quarter ended December 31, 2011 was $19.3 million. Since December 31, 2011, we have added booked sales orders totaling $4.8 million.

The Company historically has experienced, and continues to experience, customer concentration. Our eight largest customers collectively accounted for 77% of our revenue for the nine months ended December 31, 2011. For the nine month periods ended December 31, 2011 and 2010, GT Advanced Technologies, our largest customer, accounted for approximately 37% and 56% of reported net sales, respectively. A significant loss of business from the Company’s largest customer or a combination of several of our significant customers could result in lower operating profitability and/or operating losses if the Company is unable to replace such lost revenue from other sources. A material, sustained downturn in revenue could make it more challenging for the Company to meet debt covenants under its existing long-term debt agreements. If the Company defaulted on such covenants and was unable to cure the defaults or obtain waivers, the lending bank could choose to accelerate payment of any amounts outstanding under various debt facilities and, under certain circumstances, the Bank may be entitled to cancel the facilities. If the Bank chose to accelerate our obligations, such acceleration may cause the Company’s cash position to deteriorate or, if cash on hand were insufficient to satisfy any payment due, may require the Company to obtain alternate financing.

Our contracts are generated both through negotiation with the customer and from bids made pursuant to a request for proposal. Our ability to receive contract awards is dependent upon the contracting party’s perception of such factors as our ability to perform on time, our historical performance, including quality, our financial condition and our ability to price our services competitively. Although some of our contracts contemplate the manufacture of one or a limited number of units, we continually seek more long-term projects with a more predictable cost structure.

Because our revenues are derived from the sale of goods manufactured pursuant to a contract, and we do not sell from inventory, it is necessary for us to constantly seek new contracts. There may be a time lag between our completion of one contract and commencement of work on another contract. During this period, we will continue to incur overhead expense but with lower revenue resulting in lower operating margins. Furthermore, changes in either the scope of a contract or the delivery schedule may impact the revenue we receive under the contract and the allocation of manpower. Although we provide manufacturing services for large governmental programs, we usually do not work directly for agencies of the United States government. Rather, we perform our services for large government contractors and OEM companies. However, our business is dependent in part on the continuation of governmental programs which require the services we provide.

Growth Strategy

Our strategy is to leverage our core competence as a manufacturer of high-precision, large-scale metal fabrications and machined components to expand our business into areas that have shown increasing demand and which we believe could generate higher margins. In November 2010, we announced the formation of our China subsidiary, WCMC. This subsidiary was formed to respond to an existing customer’s desire to migrate their supply chain nearer to their end market within China. Since the formation of WCMC, we have received numerous inquiries from existing and potential customers for precision, large-scale fabricated and machined metal components and systems in Asia. During the nine month period ending December 31, 2011, our manufacturing capacity and capability had been qualified in China for five product lines on behalf of four separate customers. Based on the initial interest expressed in our WCMC operation and the qualified manufacturing capacity, we believe there are attractive opportunities to expand our WCMC operations. During the quarters ended September 30, 2011 and December 31, 2011, we manufactured initial production volumes at our WCMC subsidiary. After qualifying manufacturing capacity for four customers in China, WCMC hopes to receive production volume orders for the production of multi-crystalline, mono-crystalline and sapphire chambers during the fourth quarter of fiscal 2012 and early fiscal 2013.

Diversifying Our Core Industries

We believe that rising energy demands along with increasing environmental concerns are likely to continue to drive demand in the alternative energy industry, particularly the solar, wind, LED and nuclear power industries. Because of our capabilities and the nature of the equipment required by companies in the alternative energy industries, we intend to focus our services in this sector. We also expect to market our services for medical device applications where customer requirements demand strict tolerances and an ability to manufacture complex heavy equipment.

As a result of both the increased prices of oil and gas and the resulting greenhouse gas emissions, nuclear power may become an increasingly important source of energy. In January 2010, the Obama administration increased the level of government-backed debt guarantees from $18 billion to $56 billion as an incentive to support the construction of new nuclear plants in the U.S. The 2011 nuclear tragedy in Japan has bolstered demand for advanced nuclear reactor designs with passive safety systems. Over the next 10 years, 26 nuclear power plants are scheduled to be built in China, six in the United States and five in Europe, (including three in the United Kingdom). Because Ranor is one of the few facilities left in the United States that has the certifications required to produce the necessary components for these plants, this pipeline of new nuclear projects creates a significant opportunity. Revenues derived from the nuclear power industry increased by $1.6 million for the nine months ended December 31, 2011 when compared to the comparable nine month period in the prior year. Currently, nuclear power related orders constitute approximately 8.5% of our backlog. Because of our manufacturing capabilities, our certification from the American Society of Mechanical Engineers and our historic relationships with suppliers in the nuclear power industry, we believe that we are well positioned to benefit from any increased activity in the nuclear sector. However, we cannot assure you that we will be able to develop any significant business from the nuclear industry.

In addition to the nuclear energy industry, we are also exploring potential business applications focused on the medical industry. These efforts include the development and fabrication of transportation/storage solutions for radioactive isotopes and the development and fabrication of critical components for proton beam therapy machines designed to be utilized in the treatment of cancer. We believe that both our radioactive isotope and proton beam customer are on track to obtain regulatory clearance of their respective products during calendar year 2012. If our customers are successful in clearing regulatory approvals during calendar year 2012, we believe we are positioned to benefit from production orders as they are cleared to begin marketing their respective regulated products. We currently, have an exclusive manufacturing contract with one proton beam therapy customer that could result in approximately $30 million in revenue over a three year period, if such customer receives marketing approval of their product from the U.S. Food and Drug Administration.

Growing global demand for LED lighting and LED enabled products, has increased the worldwide demand for HEM sapphire, a core component in high end LED products. Accordingly, many polysilicon companies like our customer GT Advanced Technologies are expanding into the field of HEM sapphire and existing players in the HEM sapphire industry are expanding their production capacity. The production of HEM sapphire requires robust high temperature furnaces much like those we have been producing for the processing of polysilicon within the solar industry. Accordingly we believe the HEM sapphire field is a growing sector where our manufacturing expertise and experience with similar products for the solar industry can be directly leveraged. We are in active dialogue with both existing customers and potential customers regarding our capability and capacity to manufacture furnaces for the HEM sapphire industry in both the U.S. and in Asia.

Historically we have participated in the multi-crystalline segment of the solar industry through the manufacturing support we have provided GT Advanced Technologies. Increasingly GT Advanced Technologies and other companies are focusing on production innovations that will improve the production efficiency and cost competitiveness of mono-crystalline solar cells. To diversify our customer and sector concentration within the solar industry we are in active discussions with various companies focused on enabling production equipment for mono-crystalline solar cells and believe these efforts will provide us with broader capacity and customer diversification in the future. During the quarter ended December 31, 2011, we began or completed manufacture of initial mono-crystalline furnaces for three separate customers with the goal of qualifying our production capacity in the U.S. and China for these customers and subsequent production volume orders.

Expansion of Manufacturing Capabilities

In addition to the expansion of our existing manufacturing capabilities, we may, from time to time, pursue opportunistic acquisitions to increase and strengthen our manufacturing, marketing, product development and customer diversification. On January 8, 2010, the Company issued a purchase order for the purchase of a gantry mill machine totaling $2.3 million. This purchase commitment represents an investment necessary to refresh and upgrade the Company’s fleet of manufacturing equipment and capabilities. Under this purchase commitment, the Company was obligated to make three equal payments beginning in January 2010 with the final payment to be made upon final delivery during the quarter ending March 31, 2012. A portion of the proceeds from the December 2010 municipal bond financing were used to finance acquisitions of qualifying manufacturing equipment to be installed at the Westminster facility, including final payments for the gantry mill machine. Additionally, in February 2011, we commenced construction of a 19,500 sq. ft. expansion of our Westminster, Massachusetts facility. The building expansion was completed and placed into service during September 2011. The gantry mill machine was installed during the second quarter of 2012, completed testing and final configuration and was placed into service at the end of the third quarter of fiscal 2012.

Revenue Recognition

We derive revenues from (i) the fabrication of large metal components for our customers, and (ii) the precision machining of such large metal components, including related manufacturing engineering services. Over 85% of our net sales are derived from short-term contracts for production activities. Our remaining sales are derived from long-term contracts for design, development and production activities. We consider the nature of our contracts and the types of products and services provided when we determine the proper accounting method for a particular contract.

We account for revenues and earnings in our businesses using the percentage-of-completion method of accounting. Under the percentage-of-completion method, we recognize contract revenue as the work progresses, either as the products are produced and delivered, or as services are rendered, as applicable. We determine progress toward completion on production contracts based on either input measures, such as labor hours incurred, or output measures, such as units delivered, as appropriate.

Provisions for estimated losses on uncompleted contracts are made in the period in which such losses are determined. Changes in job performance, job conditions, and estimated profitability are recognized in the period in which the revisions are determined.

Variable Interest Entity

Until fiscal 2011, we consolidated WM Realty, a variable interest entity controlled by our director, Andrew Levy, from which we leased real property located at Bella Drive, Westminster, Massachusetts. On December 20, 2010, through our wholly owned subsidiary, Ranor, we purchased this property pursuant to a Purchase and Sale Agreement by and among WM Realty and Ranor. Concurrent with the property purchase, the lease between Ranor and WM Realty was terminated, as of December 21, 2010 and we no longer include the VIE in our financial statements.

Income Taxes

We provide for federal, state and foreign income taxes currently payable, as well as those deferred because of temporary differences between reporting income and expenses for financial statement purposes versus tax purposes. Deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences between carrying amount of assets and liabilities for financial reporting purposes and the amounts used for income tax purposes. Deferred tax assets and liabilities are measured using the enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recoverable. The effect of the change in the tax rates is recognized as income or expense in the period of the change. A valuation allowance is established, when necessary, to reduce deferred income taxes to the amount that is more likely than not to be realized.

As of December 31, 2011, our federal net operating loss carry-forward was approximately $1.8 million. If not utilized, the federal net operating loss carry-forwards of Ranor and TechPrecision will expire in 2025 and 2027, respectively. Furthermore, because of the over fifty-percent change in ownership as a consequence of the reverse acquisition in February 2006, the amount of net operating loss carry forward used in any one year in the future is substantially limited.

New Accounting Pronouncements

See Note 2, Summary of Significant Accounting Policies, in the Notes to our Consolidated Financial Statements.

Results of Operations

Our results of operations are affected by a number of external factors including the availability of raw materials, commodity prices (particularly steel), foreign currency exchange rate fluctuations, macroeconomic factors, including the availability of capital that may be needed by our customers, and political, regulatory and legal conditions in the United States and foreign markets.

Our results of operations are also affected by our success in booking new contracts and when we are able to recognize the related revenue because of delays in customer acceptances of our products, delays in deliveries of ordered products and our rate of progress in the fulfillment of our obligations under our contracts. A delay in deliveries or cancellations of orders would cause us to have inventories in excess of our short-term needs, and may delay our ability to recognize, or prevent us from recognizing, revenue on contracts in our order backlog.

Net sales to our largest customer during the three and nine months ended December 31, 2011 totaled $3.2 million and $10.0 million, respectively. At the end of the third quarter of fiscal 2012, our purchase order backlog was $19.3 million compared with $32.5 at March 31, 2011. Since December 31, 2011, we have received new purchase orders totaling $4.8 million.

Three Months Ended December 31, 2011 and 2010

The following table sets forth information from our statements of operations for the three months ended December 31, 2011 and 2010, in dollars and as a percentage of revenue (dollars in thousands):

December 31, 2011 Amount Percent December 31, 2010 Amount Percent Changes Amount Percent
Net sales $10,864 100% $9,670 100% $1,194 12%
Cost of sales 10,124 93% 6,814 70% 3,310 48%
Gross profit 740 7% 2,856 30% (2,116) (74)%
Selling, general and administrative expenses 1,924 18% 1,274 13% 650 51%
(Loss) income from operations (1,184) (11)% 1,582 17% (2,766) (174)%
Other income (expense), net (58) (-)% (213) (3)% 155 (N/M)%
(Loss) Income before income taxes (1,241) (11)% 1,369 14% (2,610) (N/M)%
Income tax (benefit) expense (93) (-)% 540 6% (633) (N/M)%
Net (loss) income $(1,148) (11)% $829 8% $(1,977) (N/M)%

N/M = Not meaningful

Net Sales

Net sales increased by $1.2 million, or 12%, to $10.9 million for the three months ended December 31, 2011 when compared to the same period last year. Net sales during the quarter ended December 31, 2011 to customers in commercial and industrial markets increased by $1.9 million when compared to the quarter ended December 31, 2010. This increase was partially offset by decreased sales of $0.5 million to customers in the defense and aerospace markets and decreased sales volume of $0.1 million each to customers in the medical and nuclear markets, respectively. Net sales to customers in alternative energy markets were flat year-over-year at $6.6 million as market demand slowed for equipment spending. During the quarter ended December 31, 2011, the Company’s China based subsidiary, WCMC, contributed $3.2 million in net sales.

Cost of Sales and Gross Margin

Our cost of sales for the three months ended December 31, 2011 increased by $3.3 million or 48% to $10.1 million, from $6.8 million for the same period in fiscal 2011. The increase in the cost of sales was principally due to unplanned costs incurred on first article projects and prototyping for customers of Ranor. Gross margins in the third quarter of fiscal 2012 were 7% compared to 30% for the same quarter in fiscal 2011. Third quarter gross margins were negatively impacted by $0.6 million of contract losses and lower margins on a heavy volume of prototyping and first article production when compared to the same quarter a year ago, which featured a higher volume of repeat production projects. During the quarter ended December 31, 2011, prototype and first article production comprised 30% of consolidated revenue or 54% of U.S.’s quarterly revenue base, respectively, while in the prior year third quarter 71% of U.S.’s net sales were generated from repeat production programs.

Selling, General and Administrative Expenses

Selling, general and administrative (“SG&A”) expenses for the three months ended December 31, 2011 were $1.9 million compared to $1.3 million for three months ended December 31, 2010, representing an increase of $0.6 million or 51%. SG&A was 18% as a percentage of sales during the second quarter of fiscal 2012, compared with 13% of net sales for the same period in fiscal 2011. Primary drivers of this increase in expense were costs associated with higher staffing levels in the U.S. ($0.3 million) and China ($0.2 million) to support the China expansion and an increased level of sales, marketing and business development efforts. In addition, travel related expenses increased by $0.1 million for the quarter ended December 31, 2011 when compared to the same quarter in the prior year.

Other Income, (Expense), net

Other income, (expense), net decreased by $0.2 million or 73% for the three months ended December 31, 2011 when compared with the same period in fiscal 2011. Other income, (expense), net is primarily made up of interest expense for the periods ended December 31, 2011 and 2010 for $0.08 million and $0.1 million, respectively, a decrease of $0.03 million. This reduction in interest expense is due to $0.03 million of interest capitalized in connection with the expansion project at our Westminster, Massachusetts facility and the net effect of lower interest rates on higher average debt volume when compared with prior year period. In addition, non-recurring financing costs of $0.1 million in connection with the purchase of our Westminster facility were incurred in fiscal 2011.

Income Taxes

For the three months ended December 31, 2011, the Company recorded a tax benefit of $92,682 compared with a tax expense of $0.5 million in the fiscal 2011. The tax benefit was driven by a swing from taxable income to losses for U.S. operations in the current quarter partially offset by tax expense accrued on taxable income generated in China.

Net (Loss) Income

As a result of the factors described above, our net loss was $1.1 million or $0.07 per share basic and fully diluted for the three months ended December 31, 2011, compared to net income of $0.8 million, or $0.06 per share basic and $0.04 per share fully diluted, for the three months ended December 31, 2010.

Nine Months Ended December 31, 2011 and 2010

The following table sets forth information from our statements of operations for the nine months ended December 31, 2011 and 2010, in dollars and as a percentage of revenue (dollars in thousands):

2011 Amount Percent 2010 Amount Percent Changes Nine Months Ended December 31, 2011 to 2010 Amount Percent
Net sales $27,187 100% $24,205 100% $2,982 12%
Cost of sales 22,105 81% 16,448 68% 5,657 34%
Gross profit 5,082 19% 7,757 32% (2,675) (34)%
Selling, general and administrative 5,610 21% 3,413 14% 2,197 64%
(Loss) income from operations (528) (2)% 4,344 18% (4,872) (112)%
Other income (expense), net (184) (1)% (367) (2)% 183 (N/M)%
(Loss) income before income taxes (712) (3)% 3,977 16% (4,689) (N/M)%
Income tax expense 143 --% 1,473 6% (1,330) (N/M)%
Net (loss) income $(855) (3)% $2,504 10% $(3,359) (N/M)%

N/M = Not meaningful

Net Sales

Net sales increased by $3.0 million, or 12%, to $27.2 million for the nine months ended December 31, 2011 when compared to the same nine month period in fiscal 2011. Net sales to new and existing customers in the commercial/industrial and Nuclear markets increased by $4.5 million and $1.6 million, respectively when compared to the same period one year ago. However, net sales to customers in the alternative energy markets decreased by $2.5 million as market demand slowed for equipment spending when compared to sales to this market for the same nine month period in the prior year. Net sales in defense and aerospace and medical markets, during the nine month period ended December 31, 2011, decreased by $0.4 million and $0.2 million, respectively when compared to the same period one year ago. The Company’s China subsidiary, WCMC, contributed $3.2 million in net sales to alternative energy customers during the nine month period ended December 31, 2011.

Cost of Sales and Gross Margin

Our cost of sales for the nine months ended December 31, 2011 increased by $5.6 million or 34% to $22.1 million from $16.4 million for the comparative period in fiscal 2011. Gross margins during the first nine months of fiscal 2012 were 19% compared to 32% for the same nine month period in fiscal 2011. Gross margins during the first nine months of fiscal 2012 were also lower due to contract losses of $1.0 million incurred on a heavy volume of prototyping and first article production when compared to the same period a year ago, which featured a higher volume of repeat production work. Gross margin in any reporting period is impacted by the mix of services we provide on projects completed within that period. Generally our margin on materials procurement services is lower than the margin we garner for our fabrication, engineering and machining services. Material costs as a component of cost of sales were $1.0 million higher and labor and overhead costs were also $1.6 million higher for the nine month period ended December 31, 2011 when compared to the comparable period in the prior year. These increased material, labor and overhead costs during the first nine months of fiscal 2012 when compared to lower material costs in the prior year have the impact of lowering overall gross margin.

Selling, General and Administrative Expenses

Selling, general, and administrative expenses for the nine months ended December 31, 2011 were $5.6 million compared to $3.4 million for nine months ended December 31, 2010, an increase of $2.2 million or 64%. Primary drivers of this increase in expense were higher staffing levels in the U.S. ($0.7 million) and China ($1.0 million) in support of our China expansion and an increased level of sales, marketing and business development efforts. Additionally, other expenses increased by $0.3 million for the nine month period ended December 31, 2011 when compared to the prior year period primarily due to travel related to our China operation and increased business development activity. Non-cash share based compensation costs increased by $0.2 million when compared to the same nine month period in the prior year.

Other Income (Expense), net

Other income, (expense), net decreased by $183,142 or 50% for the nine months ended December 31, 2011 when compared with the same period in fiscal 2011. Other income, (expense), net is primarily made up of interest expense for the periods ended December 31, 2011 and 2010 for $0.2 million and $0.3 million, respectively, a decrease of $0.1 million. This reduction in interest expense is due to interest capitalized of $0.04 million for the ongoing expansion project at our Westminster, Massachusetts facility and lower interest rates on higher average levels of debt when compared with the same prior year period. Other income (expense), net decreased by $0.08 million when compared with the same prior year period primarily because of proceeds from a non-recurring sale of equipment ($0.06 million) and financing costs ($0.03 million) recorded in fiscal 2011.

Income Taxes

For the nine months ended December 31, 2011, the Company recorded tax expense of $0.14 million compared with a recorded tax expense for Federal and state income tax of $1.5 million in the comparable nine month period, last year. The tax provision for fiscal 2012 was the result of tax expense recorded on taxable income generated at the China enterprise rate of 25% on ordinary income, net of a $14,832 U.S. benefit.

Net Income (Loss)

As a result of the foregoing, our net loss was $0.9 million or $0.05 per share basic and fully diluted, respectively, for the nine months ended December 31, 2011, as compared to net income of $2.5 million or $0.18 per share basic and $0.12 fully diluted for the nine months ended December 31, 2010.

Liquidity and Capital Resources

At December 31, 2011, we had working capital of $11.4 million as compared with working capital of $13.6 million at March 31, 2011, representing a decrease of $2.2 million or 16%. The following table sets forth information as to the principal changes in the components of our working capital:

(dollars in thousands)

Dec. 31, 2011 March 31, 2011 Change Amount Percentage Change
Cash and cash equivalents $3,086 $7,541 $(4,455) (59)%
Accounts receivable, net 5,543 5,578 (35) (1)%
Costs incurred on uncompleted contracts 4,934 2,520 2,414 96%
Inventory - raw materials 292 723 (431) (60)%
Prepaid taxes 992 122 870 711%
Other current assets 669 441 228 52%
Current deferred taxes 642 462 180 39%
Accounts payable 1,320 1,093 227 21%
Accrued expenses 1,760 958 802 84%
Accrued Taxes 158 -- 158 100%
Deferred revenue 154 382 (228) (60)%

The following table summarizes our primary cash flows for the periods presented:

(dollars in thousands)

Cash flows provided by (used in): Dec. 31, 2011 Dec. 31, 2010 Change Amount
Operating activities $(2,747) $2,286 $5,033
Investing activities (2,343) (721) 1,622
Financing activities 623 (1,411) 2,034
Effects of foreign exchange rates on cash 12 -- 12
Net increase (decrease) in cash and cash equivalents $(4,455) $154 $(4,609)

22

Cash used in operations was $2.7 million for the nine months ended December 31, 2011 as compared with cash provided by operations of $2.3 million for the nine months ended December 31, 2010, a change of $5.0 million. When compared to fiscal 2011, cash flows from operations were impacted by a swing from net income of $2.5 million to a net loss of $0.9 million. We used $0.8 million of cash to pay federal and state estimated income taxes, $0.5 million to provide collateral for our debt obligations, and $2.3 million to fund work in progress. Other working capital components increased by $0.1 million. The cash used for working capital reflects an increase in the number of projects in progress as our business and customer base grows. Since March 31, 2011, we have used cash of approximately $2.0 million for payments to suppliers and subcontractors for materials and labor in China.

We invested $2.3 million in new equipment and the expansion of our manufacturing facility in Westminster, Massachusetts during the nine months ended December 31, 2011, for the purchase of a new gantry mill and the 19,500 sq. ft. expansion of the building. A bond financing arranged with the State of Massachusetts and the Bank in December 2010 provided financing capacity to fund the purchase of the gantry mill as well as other qualifying manufacturing equipment. The December 2010 bond financing with the State of Massachusetts and the Bank also designated funds that could be utilized for the expansion of our Westminster, Massachusetts facility.

Net cash provided by financing activities was $0.6 million during the nine months ended December 31, 2011 as compared with net cash used in financing activities of $1.4 million for the same period in fiscal 2011. The primary use of cash under financing activities in fiscal 2012 related to repayments of long-term debt including leases for $1.1 million. We also borrowed an additional $1.7 million under the bond financing agreement to fund the ongoing plant and equipment expansion at our Westminster, Massachusetts facility. During the same period in fiscal 2011, we borrowed $4.3 million and repaid $4.3 million of long-term debt in total and distributed $1.3 million to the partners of WM Realty. We borrowed $3.1 million under a new bond agreement with the Massachusetts Development Financing Agency, administered by the bank, and used the proceeds to repurchase land and building owned by a former consolidated VIE, WM Realty.

All of the above activity resulted in a net decrease in cash of $4.5 million for the nine months ended December 31, 2011 compared with a $0.2 million cash increase for the nine months ended December 31, 2010. We believe that our $2.0 million revolving credit facility, renewed on July 30, 2011 and unused as of December 31, 2011, our capacity to access equipment-specific financing, plus our current cash balance of $3.1 million will be sufficient to enable us to satisfy our cash requirements for the foreseeable future.

Debt Facilities

On December 30, 2010, the Company completed a $6,200,000 tax exempt bond financing with the Massachusetts Development Finance Authority (“MDFA”) pursuant to which the MDFA sold to Sovereign Bank (the “Bank”) MDFA Revenue Bonds, Ranor Issue, Series 2010A in the original aggregate principal amount of $4,250,000 (“Series A Bonds”) and MDFA Revenue Bonds, Ranor Issue, Series 2010B in the original aggregate principal amount of $1,950,000 (“Series B Bonds”). The Bank and MDFA loaned the proceeds of such sale to the Company under the terms of that certain Mortgage Loan and Security Agreement, dated as of December 1, 2010, by and among the Company, MDFA and the Bank (as Bondowner and Disbursing Agent thereunder) (the “MLSA”).

The proceeds from the sale of the Series A Bonds were used to finance the previously disclosed Ranor facility acquisition and were also used to finance the 19,500 sq. ft. expansion of Ranor’s manufacturing facility located in Westminster, MA. The proceeds of the sale of the Series B Bonds were used to finance acquisitions of qualifying manufacturing equipment installed at the Westminster facility. Under the MLSA and related documents, the Westminster facility secures, and the Company further guarantees, the Company’s obligations to the Bank and subsequent holders of the Bonds.

We also have a revolving credit facility of up to $2 million with the Bank (the “Revolving Note”). The borrowing is limited to the sum of 70% of our eligible accounts receivable plus 40% of eligible inventory up to a maximum borrowing limit of $2.0 million. At December 31, 2011, there were no borrowings under the Revolving Note, and the maximum available under the Revolving Note was available. The revolving credit facility was renewed for another year on July 30, 2011.

The secured term loan of $4 million with the Bank (the “Term Note”) issued on February 24, 2006 has a term of seven years and an initial fixed interest rate of 9%. The interest rate on the Term Note converted from a fixed rate of 9% to a variable rate on February 28, 2011. From February 28, 2011 until maturity the Term Note will bear interest at the prime rate plus 1.5%, payable on a quarterly basis. Principal is payable in quarterly installments of $142,857 plus interest, with a final payment due on March 1, 2013. The balance outstanding on the term note as of December 31, 2011 and March 31, 2011 was $0.7 million and $1.1 million respectively.

In connection with the December 30, 2010 financing, the Company executed an Eighth Amendment to the Loan Agreement. The Eighth Amendment incorporates borrowing of the Bond proceeds into the borrowings covered by the Loan Agreement. Under the MLSA and the Eighth Amendment, we must meet certain financial covenants applicable while the Bonds remain outstanding, including, among other things, that 1) the ratio of earnings available to cover fixed charges will be greater than or equal to 120%; 2) the interest coverage ratio will equal or exceed 2:1 as of the end of each fiscal quarter; and 3) the leverage ratio will be less than or equal to 3:1. As of December 31, 2011, we were in compliance with the leverage ratio (1:1). However we did not meet the ratio of earnings available to cover fixed charges or the interest coverage covenants; our ratio of earnings available to cover fixed charges as of December 31, 2011 was 20% (compared with the 120% requirement) and our interest coverage ratio was 0.4:1 (compared with the 2:1 requirement). The Company has obtained a waiver of the breach of such covenants from the Bank, which waiver covers the breach that otherwise would have occurred in connection with the covenant testing for the quarter ended December 31, 2011 and waives these covenants at March 31, 2012. The waiver does not apply to any future covenant testing dates. The Company expects to be in compliance with the agreement through December 31, 2012. In the event of default (which default may occur in connection with a non-waived breach), the Bank may choose to accelerate payment of any long-term debt outstanding and, under certain circumstances, the Bank may be entitled to cancel the facilities. If the Company were unable to obtain a waiver for a breach of covenant and the Bank accelerated the payment of any outstanding amounts, such acceleration may cause the Company’s cash position to deteriorate or, if cash on hand were insufficient to satisfy any payment due, may require the Company to obtain alternate financing to satisfy any accelerated payment obligation.

On August 8, 2011, an appraisal was completed on the Westminster, MA property assigning a value of $4.8 million. The Series A Bonds require that the loan-to-value ratio not exceed 75% indicating a maximum loan amount of $3.6 million. The bond balance exceeded the maximum loan amount at December 31, 2011 by approximately $490,000. On October 28, 2011, the Company and the Bank agreed to resolve the collateral shortfall by establishing a separate interest bearing account in the amount of $490,000. The account balance at December 31, 2011 was $436,876.

We also had a $3.0 million capital expenditure facility which was available until November 30, 2009. The capital expenditure facility was not renewed upon its expiration on November 30, 2009 as the Company intends to finance future equipment purchases on a specific item basis. Principal and interest payments are due monthly based on a five year amortization schedule. The current rate of interest is based on LIBOR, plus 3%. Any unpaid balance on the capital expenditures facility is to be paid on November 30, 2014. As of December 31, 2011, there was $471,341 outstanding under this facility.

Under our staged advance facility with the Bank agreed to make certain loans to the Company for the purpose of acquiring a gantry mill machine, which loans are secured by the gantry mill machine (the “Staged Advance Facility”). The total aggregate amount of advances under the Staged Advance Facility cannot exceed the lesser of 80% of the actual purchase price of the gantry mill machine or $1.9 million. All advances provided for monthly interest only paymements through February 28, 2011, and thereafter no further borrowings are permitted under this facility. The interest rate is LIBOR plus 4%. Beginning on April 1, 2011, the Company is obligated to pay principal and interest sufficient to amortize the outstanding balance on a five year schedule. On March 29, 2010 and December 31, 2010, the Company drew down equal amounts of $556,416 under this facility to finance the purchase of the gantry mill machine. On December 30, 2010, the Company paid down principal of $556,416 with proceeds from the Series B Bonds, and amended the Staged Advance Note to limit further advances at $556,416, with no further advances permitted. As of December 31, 2011, there was $537,869 outstanding under this facility.

Obligations under the notes to the Bank are guaranteed by the Company. The loan collateral comprises all personal property of the Company, including cash, accounts receivable, inventories, equipment, financial and intangible assets.

We believe that the $2.0 million revolving credit facility, renewed on July 30, 2011 and unused as of December 31, 2011, our capacity to access equipment-specific financing, plus our current cash balance of $3.1 million will be sufficient to enable us to satisfy our cash requirements for the foreseeable future. Nevertheless, it is possible that we may require additional funds to the extent that we upgrade or expand our manufacturing facilities.

The securities purchase agreement pursuant to which we sold the Series A Convertible Preferred Stock to Barron Partners provides Barron Partners with a right of first refusal on future equity financings, which may affect our ability to raise funds from other sources if the need arises. In the event that we make an acquisition, we may require additional financing for the acquisition. We have no commitment from any party for additional funds, however, the terms of our agreement with Barron Partners, particularly the right of first refusal, may impair our ability to raise capital in the equity markets to the extent that potential investors would be reluctant to negotiate a financing when another party has a right to match the terms of the financing. We have no off-balance sheet assets or liabilities.

Controls and procedures

As filed, 2,076 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Evaluation of Disclosure Controls and Procedures

As of December 31, 2011, we carried out an evaluation, under the supervision and with the participation of management, including our chief executive officer and chief financial officer, of the effectiveness of our disclosure controls and procedures (as defined in Rule 13a-15(e) under the Securities Exchange Act of 1934, as amended (“Exchange Act”)).

Disclosure controls and procedures are designed to ensure that information required to be disclosed by the Company in the reports that it files or submits to the SEC is recorded, processed, summarized and reported, within the time periods specified in SEC rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed is accumulated and communicated to the issuer’s management, including its principal executive and principal financial officers, or persons performing similar functions, as appropriate to allow timely decisions regarding required disclosure.

Based upon that evaluation, our chief executive officer and chief financial officer concluded that our disclosure controls and procedures were designed and operating effectively as of December 31, 2011, to provide reasonable assurance that information required to be disclosed by the Company in reports filed or submitted under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms and is accumulated and communicated to management, including our chief executive officer and chief financial officer, as appropriate to allow timely decisions regarding required disclosure.

Changes in Internal Controls

During the three months ended December 31, 2011, there were no changes in our internal control over financial reporting identified in connection with the evaluation required by paragraph (d) of Rule 13a-15 that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

Figures reported in this filing

Standardized line items from the XBRL in this filing, for the period ended 2011-12-31. Comparative periods it repeats are left out.

Figures reported in this filing
Line itemPeriodValueXBRL concept
Revenue3 months2011-10-01 to 2011-12-31$10.9mus-gaap:SalesRevenueNet
Revenue9 months2011-04-01 to 2011-12-31$27.2mus-gaap:SalesRevenueNet
Cost of revenue3 months2011-10-01 to 2011-12-31$10.1mus-gaap:CostOfGoodsAndServicesSold
Cost of revenue9 months2011-04-01 to 2011-12-31$22.1mus-gaap:CostOfGoodsAndServicesSold
Gross profit3 months2011-10-01 to 2011-12-31$739.9kus-gaap:GrossProfit
Gross profit9 months2011-04-01 to 2011-12-31$5.1mus-gaap:GrossProfit
Selling, general and administrative3 months2011-10-01 to 2011-12-31$1.9mus-gaap:SellingGeneralAndAdministrativeExpense
Selling, general and administrative9 months2011-04-01 to 2011-12-31$5.6mus-gaap:SellingGeneralAndAdministrativeExpense
Operating income3 months2011-10-01 to 2011-12-31−$1.2mus-gaap:OperatingIncomeLoss
Operating income9 months2011-04-01 to 2011-12-31−$528.4kus-gaap:OperatingIncomeLoss
Interest expense3 months2011-10-01 to 2011-12-31$77.5kus-gaap:InterestExpense
Interest expense9 months2011-04-01 to 2011-12-31$214.8kus-gaap:InterestExpense
Income tax3 months2011-10-01 to 2011-12-31−$92.7kus-gaap:IncomeTaxExpenseBenefit
Income tax9 months2011-04-01 to 2011-12-31$142.9kus-gaap:IncomeTaxExpenseBenefit
Net income3 months2011-10-01 to 2011-12-31−$1.1mus-gaap:NetIncomeLoss
Net income9 months2011-04-01 to 2011-12-31−$855.0kus-gaap:NetIncomeLoss
Diluted EPS3 months2011-10-01 to 2011-12-31−$0.07us-gaap:EarningsPerShareDiluted
Diluted EPS9 months2011-04-01 to 2011-12-31−$0.05us-gaap:EarningsPerShareDiluted
Basic EPS3 months2011-10-01 to 2011-12-31−$0.07us-gaap:EarningsPerShareBasic
Basic EPS9 months2011-04-01 to 2011-12-31−$0.05us-gaap:EarningsPerShareBasic
Diluted shares (weighted)3 months2011-10-01 to 2011-12-3117,072,721 sharesus-gaap:WeightedAverageNumberOfDilutedSharesOutstanding
Diluted shares (weighted)9 months2011-04-01 to 2011-12-3116,364,844 sharesus-gaap:WeightedAverageNumberOfDilutedSharesOutstanding
Operating cash flow9 months2011-04-01 to 2011-12-31−$2.7mus-gaap:NetCashProvidedByUsedInOperatingActivitiesContinuingOperations
Capital expenditure9 months2011-04-01 to 2011-12-31$2.3mus-gaap:PaymentsToAcquirePropertyPlantAndEquipment
Cash and equivalentsAt period end2011-12-31$3.1mus-gaap:CashAndCashEquivalentsAtCarryingValue
Current assetsAt period end2011-12-31$16.2mus-gaap:AssetsCurrent
Total assetsAt period end2011-12-31$23.8mus-gaap:Assets
Current liabilitiesAt period end2011-12-31$4.8mus-gaap:LiabilitiesCurrent
Shareholders' equityAt period end2011-12-31$13.2mus-gaap:StockholdersEquity

Source: SEC EDGAR, the filing index for accession 0000950159-12-000103. Last ingested by Listed: Nov 10, 2026, 04:27 ET. Listed shows no prices and gives no investment advice.