Listed

Nvidia Corp: Form 10-Q for the period ended May 2, 2010

Filed with the SEC on May 21, 2010 and accepted by EDGAR at May 21, 2010, 20:36 ET.

Share

Management's discussion and analysis

As filed, 48,130 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Forward-Looking Statements

This Quarterly Report on Form 10-Q contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended, which are subject to the “safe harbor” created by those sections. Forward-looking statements are based on our management’s beliefs and assumptions and on information currently available to our management. In some cases, you can identify forward-looking statements by terms such as “may,” “will,” “should,” “could,” “goal,” “would,” “expect,” “plan,” “anticipate,” “believe,” “estimate,” “project,” “predict,” “potential” and similar expressions intended to identify forward-looking statements. These statements involve known and unknown risks, uncertainties and other factors, which may cause our actual results, performance, time frames or achievements to be materially different from any future results, performance, time frames or achievements expressed or implied by the forward-looking statements. We discuss many of these risks, uncertainties and other factors in this Quarterly Report on Form 10-Q in greater detail under the heading “Risk Factors.” Given these risks, uncertainties and other factors, you should not place undue reliance on these forward-looking statements. Also, these forward-looking statements represent our estimates and assumptions only as of the date of this filing. You should read this Quarterly Report on Form 10-Q completely and with the understanding that our actual future results may be materially different from what we expect. We hereby qualify our forward-looking statements by these cautionary statements. Except as required by law, we assume no obligation to update these forward-looking statements publicly, or to update the reasons actual results could differ materially from those anticipated in these forward-looking statements, even if new information becomes available in the future.

All references to “NVIDIA,” “we,” “us,” “our” or the “Company” mean NVIDIA Corporation and its subsidiaries, except where it is made clear that the term means only the parent company.

NVIDIA, GeForce, the NVIDIA logo, ION, Quadro, Tesla, Tegra, PhysX, NVIDIA 3D Vision, and CUDA, are trademarks and/or registered trademarks of NVIDIA Corporation in the U.S. and other countries. Other company and product names may be trademarks of the respective companies with which they are associated.

The following discussion and analysis of our financial condition and results of operations should be read in conjunction with “Item 6. Selected Financial Data” of our Annual Report on Form 10-K for the fiscal year ended January 31, 2010 and Part II, “Item 1A. Risk Factors”, of our Condensed Consolidated Financial Statements and related Notes thereto, as well as other cautionary statements and risks described elsewhere in this Quarterly Report on Form 10-Q, before deciding to purchase, hold or sell shares of our common stock.

Overview

Our Company

NVIDIA Corporation helped awaken the world to the power of computer graphics when it invented the graphics processing unit, or GPU, in 1999. Expertise in programmable GPUs has led to breakthroughs in parallel processing which make supercomputing inexpensive and widely accessible. We serve the entertainment and consumer market with our GeForce and ION graphics products, the professional design and visualization market with our Quadro graphics products, the high-performance computing market with our Tesla computing solutions products, and the mobile computing market with our Tegra system-on-a-chip products. We have three major operating segments: the GPU business, the Professional Solutions Business, or PSB, and the Consumer Products Business, or CPB.

Our GPU business is comprised primarily of our GeForce and ION products that support desktop, memory products, notebook and netbook personal computers, or PCs including chipset products that were previously described as media and communications processor, or MCP. Our PSB is comprised of our NVIDIA Quadro professional workstation products and other professional graphics products, including our NVIDIA Tesla high-performance computing products. Our CPB is comprised of our Tegra mobile products that support tablets and smartbooks, smartphones, personal media players, or PMPs, internet television, automotive navigation, and other similar devices. CPB also includes license, royalty, other revenue and associated costs related to video game consoles and other digital consumer electronics devices. Original equipment manufacturers, original design manufacturers, add-in-card manufacturers, system builders and consumer electronics companies worldwide utilize our processors as a core component of their entertainment, business and professional solutions.

We were incorporated in California in April 1993 and reincorporated in Delaware in April 1998. Our headquarter facilities are in Santa Clara, California. Our Internet address is www.nvidia.com (http://www.nvidia.com). The contents of our website are not a part of this Form 10-Q.

Recent Developments, Future Objectives and Challenges

GPU Business

During the first quarter of fiscal year 2011, we announced and shipped our GeForce GTX 480 and 470 GPUs, the first GPUs based on our Fermi architecture. The GeForce GTX 480 and GTX 470 GPUs are designed to excel at tessellation, the defining feature of DirectX 11. The GeForce GTX 480/470 GPUs also provide a higher computational capability, which will allow game developers to increase the level of physics realism via our PhysX API. We also began shipments of the GeForce 320M chipset to Apple for incorporation into their latest 13-inch MacBook notebooks. The 320M delivers up to an 80% performance increase over the previous GeForce 9400M GPU. Our stereo 3D technology continued to gain acceptance in the quarter as we sold a record number of our NVIDIA 3D Vision kits.

Professional Solutions Business

Demand for our workstation products continues to recover, fueled by demand from enterprise customers and new growth markets like video editing. During the first quarter of fiscal year 2011, we announced that a range of NVIDIA Quadro professional graphics solutions are certified by Adobe for Adobe Creative Suite 5 software, which provides real-time video editing and effects processing of Adobe Premiere Pro CS5. Tesla achieved record revenue during the first quarter of fiscal year 2011 following the launch of Tesla products based on our new Fermi architecture. We are seeing adoption of Tesla systems in industries such as supercomputing, energy and finance.

Consumer Products Business

During the first quarter of fiscal year 2011, the first phones using NVIDIA’s Tegra processors shipped – the KIN ONE and KIN TWO from Microsoft. We have multiple next-generation Tegra design wins in tablets, smartbooks and smartphones, with the first of these expected to ship during the second quarter of fiscal year 2011. We have also announced that Volkswagen and Audi will use our next-generation Tegra starting in 2012.

Product Defect

As of May 2, 2010, our Condensed Consolidated Balance Sheet included an accrued liability to cover the estimated remaining customer warranty, repair, return, replacement and other costs arising from a weak die/packaging material set in certain versions of our previous generation MCP and GPU products used in notebook configurations. During fiscal years 2010 and 2009, we recorded a warranty charge against cost of revenue of $360.4 million for related estimated costs, offset by reimbursements from insurance carriers of $75.3 million. The weak die/packaging material combination is not used in any of our products that are currently in production.

We intend to fully support our customers in their repair and replacement of these impacted products that fail, and their other efforts to mitigate the consequences of these failures. We continue to seek access to our insurance coverage regarding reimbursement to us for some or all of the costs we have incurred and may incur in the future relating to the weak material set. However, there can be no assurance that we will recover any additional reimbursement. We continue to not see any abnormal failure rates in any systems using NVIDIA products other than certain notebook configurations. However, we are continuing to test and otherwise investigate other products. There can be no assurance that we will not discover defects in other products.

In September, October and November 2008, several putative class action lawsuits were filed against us, asserting various claims related to the impacted MCP and GPU products. Please refer to Note 12 of the Notes to the Condensed Consolidated Financial Statements for further information regarding this litigation.

Stock Repurchase Program

Our Board of Directors, or our Board, has authorized us, subject to certain specifications, to repurchase shares of our common stock up to an aggregate maximum amount of $2.7 billion through May 2013. Through May 2, 2010, we have repurchased an aggregate of 90.9 million shares under our stock repurchase program for a total cost of $1.46 billion. As of May 2, 2010, we are authorized, subject to certain specifications, to repurchase shares of our common stock up to an additional amount of $1.24 billion through May 2013.

Financial Information by Business Segment and Geographic Data

Our Chief Executive Officer, who is considered to be our chief operating decision maker, or CODM, reviews financial information presented on a operating segment basis for purposes of making operating decisions and assessing financial performance.

During the first quarter of fiscal year 2011, we began reporting internally the results of our former MCP segment along with the results of our GPU segment to reflect the way we manage the GPU business. Comparative periods presented reflect this change. We report financial information for three operating segments to our CODM: the GPU business, which is comprised primarily of our GeForce and ION products that support desktop, notebook and netbook personal computers, or PCs and also includes memory products; the PSB, which is comprised of our NVIDIA Quadro professional workstation products and other professional graphics products, including our NVIDIA Tesla high-performance computing products; and our CPB, which is comprised of our Tegra mobile products that support tablets and smartbooks, smartphones, personal media players, or PMPs, internet television, automotive navigation, and other similar devices. CPB also includes license, royalty, other revenue and associated costs related to video game consoles and other digital consumer electronics devices.

The “All Other” category includes non-recurring charges that we do not allocate to our other operating segments as these expenses are not included in the segment operating performance measures evaluated by our CODM. There were no non-recurring charges for the first quarter of fiscal year 2011. Non-recurring charges related our cash tender offer to purchase certain employee stock options were $140.2 million for the first quarter of fiscal year 2010. Please refer to Note 2 of the Notes to the Condensed Consolidated Financial Statements for further discussion regarding the cash tender offer and Note 15 of the Notes to the Condensed Consolidated Financial Statements for further disclosure regarding segment information.

Results of Operations

The following table sets forth, for the periods indicated, certain items in our condensed consolidated statements of operations expressed as a percentage of revenue.

Three Months Ended May 2, 2010 April 26, 2009
Revenue 100.0% 100.0%
Cost of revenue 54.4 71.4
Gross margin 45.6 28.6
Operating expenses:
Research and development 21.8 45.4
Sales, general and administrative 9.1 17.9
Total operating expenses 30.9 63.3
Income (loss) from operations 14.7 (34.7)
Interest and other income, net 0.3 0.9
Income (loss) before income tax expense 15.0 (33.8)
Income tax expense (benefit) 1.3 (3.5)
Net income (loss) 13.7% (30.3)%

First Quarter of Fiscal Years 2011 and 2010

Revenue

Revenue was $1.00 billion for the first quarter of fiscal year 2011, compared to $664.2 million for the first quarter of fiscal year 2010, which represents an increase of 51%. We expect a seasonal decrease in revenue of 3% to 5% during the second quarter of fiscal year 2011 as compared to the first quarter of fiscal year 2011. A discussion of our revenue results for each of our operating segments is as follows:

GPU Business. GPU Business revenue increased by 43% to $780.9 million in the first quarter of fiscal year 2011, compared to $547.4 million for the first quarter of fiscal year 2010. This increase resulted from growth in our desktop GPU, notebook GPU, chipset and memory products driven by an increase in demand resulting from the economic recovery from recessionary conditions a year ago. According to the latest 2010 PC Graphics Report from Mercury Research, the graphics market grew by 67% from a year ago.

PSB. PSB revenue increased by 79% to $189.7 million in the first quarter of fiscal year 2011, compared to $106.1 million for the first quarter of fiscal year 2010. This increase was driven by growth in both our Quadro and Tesla brands. Unit shipments of our Quadro workstation products increased, fueled by demand from enterprise customers as the market recovered from the recessionary conditions of a year ago. Tesla achieved record revenue during the first quarter of fiscal year 2011 following the launch of Tesla products based on our new Fermi architecture.

CPB. CPB revenue increased by 192% to $31.2 million in the first quarter of fiscal year 2011, compared to $10.7 million for the first quarter of fiscal year 2010. The overall increase in CPB revenue was driven by a combination of an increase in royalties from our game console product line and stronger shipments of our embedded entertainment products.

Concentration of Revenue

Revenue from sales to customers outside of the United States and other Americas accounted for 85% of total revenue for the first quarter of fiscal year 2011 and 82% of total revenue for the first quarter of fiscal year 2010. Revenue by geographic region is allocated to individual countries based on the location to which the products are initially billed even if the revenue is attributable to end customers in a different location. Revenue from significant customers, those representing 10% or more of total revenue aggregated approximately 28% of our total revenue from two customers for the first quarter of fiscal year 2011 and 22% of our total revenue from two customers for the first quarter of fiscal year 2010.

Gross Profit and Gross Margin

Gross profit consists of total revenue, net of allowances, less cost of revenue. Cost of revenue consists primarily of the cost of semiconductors purchased from subcontractors, including wafer fabrication, assembly, testing and packaging, manufacturing support costs, including labor and overhead associated with such purchases, final test yield fallout, inventory and warranty provisions and shipping costs. Cost of revenue also includes development costs for license, service arrangements and stock-based compensation related to personnel associated with manufacturing.

Gross margin is the percentage of gross profit to revenue. Our gross margin can vary in any period depending on the mix of types of products sold. Our gross margin is significantly impacted by the mix of products we sell. Product mix is often difficult to estimate with accuracy. Therefore, if we experience product transition challenges, if we achieve significant revenue growth in our lower margin product lines, or if we are unable to earn as much revenue as we expect from higher margin product lines, our gross margin may be negatively impacted.

Our overall gross margin was 45.6% and 28.6% for the first quarter of fiscal year 2011 and 2010, respectively. The improvement in gross margin for the first quarter of fiscal year 2011 when compared to the first quarter of fiscal year 2010 was driven primarily by improved yields of our 40nm products as well as other manufacturing cost reductions, and a more favorable product mix, including a higher ratio of lower cost 40nm products sold and increased sales of higher margin GPU and chipset products. In addition, we recorded a stock option purchase charge of $11.4 million to cost of revenue when we completed a tender offer to purchase outstanding stock options during the first quarter of fiscal year 2010.

Our strategy for improving our gross margin relies upon delivering competitive product offerings that allow us to maintain our market leadership position and expand our addressable markets, lowering our product costs by introducing product architectures that take advantage of smaller process geometries and improving our product mix. We expect gross margin to be in the range of 46% to 47% during the second quarter of fiscal year 2011.

A discussion of our gross margin results for each of our operating segments is as follows:

GPU Business. The gross margin of our GPU business increased during the first quarter of fiscal year 2011 as compared to the first quarter of fiscal year 2010. This increase was primarily due to the ASP growth in our desktop GPU and chipset products as result of recovery from the recessionary conditions in the economy. In addition, the launch of our Fermi-based GeForce GTX 470/480 GPUs and the launch of our GeForce GT 320M chipset and strong notebook demand further improved gross margins in the first quarter of fiscal year 2011.

PSB. The gross margin of our PSB was relatively flat during the first quarter of fiscal year 2011 as compared to the first quarter of fiscal year 2010.

CPB. The gross margin of our CPB increased for the first quarter of fiscal year 2011 as compared to the first quarter of fiscal year 2010. This increase was primarily due to the negative impact of inventory reserves taken during the first quarter of fiscal year 2010. In addition, margin improvement in the first quarter of fiscal year 2011 was driven by an increase in royalty revenue from our game console product line.

Operating Expenses

(In millions)

Three Months Ended May 2, 2010 April 26, 2009 $ Change % Change
Research and development expenses $218.1 $301.8 $(83.7) (28)%
Sales, general and administrative expenses 90.9 118.9 (28.0) (24)%
Total operating expenses $309.0 $420.7 $(111.7) (27)%
Research and development as a percentage of net revenue 21.8% 45.4%
Sales, general and administrative as a percentage of net revenue 9.1% 17.9%

Research and Development

Research and development expenses were $218.1 million and $301.8 million during the first quarters of fiscal years 2011 and 2010, respectively, a decrease of $83.7 million, or 28%. During the first quarter of fiscal year 2010, research and development expenses included stock-based compensation of $90.5 million related to the purchase of certain outstanding options that were tendered in March 2009. Compensation and benefits increased by $5.7 million primarily related to growth in headcount in departments related to research and development functions. Development expenses increased by $7.5 million primarily due to increased expenses related to engineering consumption, prototype materials, testing devices, and internal board requests. These increases were offset by a decrease of $2.3 million in depreciation and amortization due to fully depreciated assets and a decrease of $6.7 million in ongoing stock-based compensation expense resulting from the cancellation of stock options pursuant to the tender offer.

In order to remain competitive, we anticipate that we will continue to devote substantial resources to research and development. Research and development expenses are likely to fluctuate from time to time to the extent we make periodic incremental investments in research and development and these investments may be independent of our level of revenue.

Sales, General and Administrative

Sales, general and administrative expenses were $90.9 million and $118.9 million during the first quarters of fiscal years 2011 and 2010, respectively, a decrease of $28.0 million, or 24%. During the first quarter of fiscal year 2010, sales, general and administrative expenses included stock-based compensation of $38.3 million related to the purchase of certain outstanding options that were tendered in March 2009. Compensation and benefits increased by $9.1 million primarily due to headcount growth in departments related to sales, general, and administrative functions and incentive bonus expenses. Additionally, as a result of a partial resumption of spending in discretionary areas, there were increases in expenses related to computer software and equipment of $2.1 million, marketing of $1.7 million, and travel and entertainment of $1.4 million. These increases were offset by a decrease of $1.5 million in depreciation and amortization due to fully depreciated assets and a decrease of $1.9 million in ongoing stock-based compensation expense resulting from the cancellation of stock options pursuant to the tender offer.

We expect operating expenses to be flat in the second quarter of fiscal year 2011 compared to the first quarter of fiscal year 2011.

Interest Income and Interest Expense

Interest income, net of interest expense consists of interest earned on cash, cash equivalents and marketable securities. Interest income decreased to $4.8 million in the first quarter of fiscal year 2011, from $5.3 million in the first quarter of fiscal year 2010, primarily due to the result of lower interest rates earned on our investments in the first quarter of fiscal year 2011 when compared to the first quarter of fiscal year 2010.

Other Income (Expense), net

Other income and expense primarily consists of realized gains and losses on the sale of marketable securities and foreign currency translation. Other (expense), net of other income was ($1.4) million in the first quarter of fiscal year 2011 and $0.8 million in the first quarter of fiscal year 2010. The fluctuation of $2.3 million was primarily driven by realized gains from investments in the first quarter of fiscal year 2010.

Income Taxes

We recognized income tax expense (benefit) of $13.1 million and ($23.5) million for the first quarter of fiscal years 2011 and 2010, respectively. Income tax expense (benefit) as a percentage of income before taxes, or our effective tax rate, was 8.7% and (10.5%) for the first quarter of fiscal years 2011 and 2010, respectively.

Our effective tax rate on income before tax for the first quarter of fiscal year 2011 was lower than the United States federal statutory rate of 35% due primarily to income earned in jurisdictions where the tax rate is lower than the United States federal statutory tax rate. Further, our annual projected effective tax rate as of the first quarter of fiscal year 2011 of 15.4% differs from our effective tax rate for the first quarter of fiscal year 2011 of 8.7% due to favorable discrete events in the quarter primarily attributable to the expiration of statutes of limitations in certain non-United States jurisdictions for which we had not previously recognized related tax benefits. The United States federal research tax credit expired on December 31, 2009. We will recognize the tax benefit of the United States federal research tax credit if and when reenacted into law.

The expected tax benefit derived from our loss before tax for the first quarter of fiscal year 2010 at the United States federal statutory tax rate of 35% differs from our actual effective tax rate of (10.5%) due primarily to permanent tax differences related to stock-based compensation, including with respect to our stock option purchase completed in the first quarter of fiscal year 2010, and losses recognized in tax jurisdictions where no tax benefit has been recognized, partially offset by the tax benefit of the United States federal research tax credit.

Please refer to Note 5 of the Notes to Condensed Consolidated Financial Statements for further information regarding the components of our income tax expense.

Liquidity and Capital Resources

(In millions)

As of May 2, 2010 As of January 31, 2010
Cash and cash equivalents $447.3 $447.2
Marketable securities 1,317.6 1,281.0
Cash, cash equivalents, and marketable securities $1,764.9 $1,728.2

(In millions)

Three Months Ended May 2, 2010 April 26, 2009
Net cash provided by (used in) operating activities $(5.4) $142.1
Net cash provided by (used in) investing activities $(57.3) $(8.9)
Net cash provided by (used in) financing activities $62.8 $(38.6)

As of May 2, 2010, we had $1.76 billion in cash, cash equivalents and marketable securities, an increase of $36.7 million from $1.73 billion at the end of fiscal year 2010. Our portfolio of cash equivalents and marketable securities is managed by several financial institutions. Our investment policy requires the purchase of top-tier investment grade securities, the diversification of asset type and includes certain limits on our portfolio duration.

Operating Activities

Operating activities used cash of $5.4 million and provided cash of $142.1 million during the first quarter of fiscal years 2011 and 2010, respectively. The decrease in cash provided by operating activities in the first quarter of fiscal year 2011 was primarily due to additional working capital as a result of significant increases in accounts receivables driven by less sales linearity and increases in inventories due to builds for the GPU business. This was offset by cash earnings comprised of an increase in net income after adding back non-cash depreciation and stock based compensation.

Investing Activities

Investing activities have consisted primarily of purchases and sales of marketable securities, acquisitions of businesses and purchases of property and equipment, which include the purchase of property, leasehold improvements for our facilities and intangible assets. Investing activities used cash of $57.3 million and $8.9 million during the first quarters of fiscal years 2011 and 2010, respectively. The increase in cash used in investing activities in the first quarter of fiscal year 2011 was driven by increases in purchase of marketable securities and decreases in proceeds received from sales and maturities of securities.

We expect to spend approximately $100 million to $150 million for capital expenditures during the remainder of fiscal year 2011, primarily for leasehold improvements, software licenses, emulation equipment, computers and engineering workstations. In addition, we may continue to use cash in connection with the acquisition of new businesses or assets.

Financing Activities

Financing activities provided cash of $62.8 million and used cash of $38.6 million during the first quarter of fiscal years 2011 and 2010, respectively. Net cash provided by financing activities in the first quarter of fiscal year 2011 was primarily due to an increase of proceeds from issuance of common stock under our employee stock plans during the first quarter of fiscal year 2011. In addition, cash provided by financing activities during the first quarter of fiscal year 2011 was greater as compared to the first quarter of fiscal year 2010, due to a cash payment made towards purchase of certain outstanding options that were tendered in March 2009.

Liquidity

Our primary source of liquidity is cash generated by our operations. Our investment portfolio consisted of cash and cash equivalents, asset-backed securities, commercial paper, mortgage-backed securities issued by government-sponsored enterprises, equity securities, money market funds and debt securities of corporations, municipalities and the United States government and its agencies. These investments are denominated in United States dollars. As of May 2, 2010, we did not have any investments in auction-rate preferred securities.

All of our cash equivalents and marketable securities are treated as “available-for-sale”. Investments in both fixed rate and floating rate interest earning instruments carry a degree of interest rate risk. Fixed rate debt securities may have their market value adversely impacted due to a rise in interest rates, while floating rate securities may produce less income than expected if interest rates fall. Due in part to these factors, our future investment income may fall short of expectations due to changes in interest rates or if the decline in fair value of our publicly traded debt or equity investments is judged to be other-than-temporary. We may suffer losses in principal if we are forced to sell securities that decline in market value due to changes in interest rates. However, because any debt securities we hold are classified as “available-for-sale,” no gains or losses are realized in our statement of operations due to changes in interest rates unless such securities are sold prior to maturity or unless declines in market values are determined to be other-than-temporary. These securities are reported at fair value with the related unrealized gains and losses included in accumulated other comprehensive income, a component of stockholders’ equity, net of tax.

As of May 2, 2010 and January 31, 2010, we had $1.76 billion and $1.73 billion, respectively, in cash, cash equivalents and marketable securities. Our investment policy requires the purchase of top-tier investment grade securities and the diversification of asset types and includes certain limits on our portfolio duration, as specified in our investment policy guidelines. These guidelines also limit the amount of credit exposure to any one issue, issuer or type of instrument. As of May 2, 2010, we were in compliance with our investment policy. As of May 2, 2010, our investments in government agencies and government sponsored enterprises represented approximately 64% of our total investment portfolio, while the financial sector accounted for approximately 23% of our total investment portfolio. All of our investments are with A/A2 or better rated securities.

We performed an impairment review of our investment portfolio as of May 2, 2010. Based on our quarterly impairment review, we concluded that our investments were appropriately valued and did not record any impairment during three months ended May 2, 2010. However, during fiscal year 2009, we recorded an other than temporary impairment charge of $5.6 million related to our investment in the money market funds held by the Reserve International Liquidity Fund, Ltd., or International Reserve Fund. Please refer to Note 7 of the Notes to the Condensed Consolidated Financial Statements for further details.

Net realized gains, excluding any impairment charges, were $0.3 million and $0.8 million for the first quarters of fiscal year 2011 and 2010, respectively. As of May 2, 2010, we had a net unrealized gain of $11.1 million, which was comprised of gross unrealized gains of $11.4 million, offset by $0.3 million of gross unrealized losses. As of January 31, 2010, we had a net unrealized gain of $12.6 million, which was comprised of gross unrealized gains of $12.7 million, offset by $0.1 million of gross unrealized losses.

As of May 2, 2010, we held a money market investment in the International Reserve Fund, which was valued at $13.0 million, net of $5.6 million of other than temporary impairment charges that we recorded during fiscal year 2009. We reclassified this amount out of cash and cash equivalents in our Condensed Consolidated Balance Sheet due to the halting of redemption requests in September 2008 by the International Reserve Fund. The $13.0 million value of our holdings in the International Reserve Fund as of May 2, 2010 reflects an initial investment of $130.0 million, reduced by $111.4 million that we received from the International Reserve Fund during the fiscal year 2010 and the $5.6 million other than temporary impairment charge we recorded against the value of this investment during fiscal year 2009. The $111.4 million we received was our portion of a payout of approximately 85.6% of the total assets of the International Reserve Fund. All of the underlying securities held by the International Reserve Fund had matured by the end of fiscal year 2010. We expect to ultimately receive the proceeds from our remaining investment in the International Reserve Fund, excluding some or all of the $5.6 million impairment charges. However, redemptions from the International Reserve Fund are currently subject to pending litigation, which could cause further delay in receipt of our funds.

Our accounts receivable are highly concentrated and make us vulnerable to adverse changes in our customers’ businesses, and to downturns in the industry and the worldwide economy. Two customers accounted for approximately 27% of our accounts receivable balance at May 2, 2010. While we strive to limit our exposure to uncollectible accounts receivable using a combination of credit insurance and letters of credit, difficulties in collecting accounts receivable could materially and adversely affect our financial condition and results of operations. These difficulties are heightened during periods when economic conditions worsen. We continue to work directly with more foreign customers and it may be difficult to collect accounts receivable from them. We maintain an allowance for doubtful accounts for estimated losses resulting from the inability of our customers to make required payments. This allowance consists of an amount identified for specific customers and an amount based on overall estimated exposure. If the financial condition of our customers were to deteriorate, resulting in an impairment in their ability to make payments, additional allowances may be required, we may be required to defer revenue recognition on sales to affected customers, and we may be required to pay higher credit insurance premiums, any of which could adversely affect our operating results. In the future, we may have to record additional reserves or write-offs and/or defer revenue on certain sales transactions which could negatively impact our financial results.

Stock Repurchase Program

Our Board of Directors has authorized us, subject to certain specifications, to repurchase shares of our common stock up to an aggregate maximum amount of $2.7 billion through May 2013. The repurchases will be made from time to time in the open market, in privately negotiated transactions, or in structured stock repurchase programs, and may be made in one or more larger repurchases, in compliance with Rule 10b-18 of the Securities Exchange Act of 1934, as amended, subject to market conditions, applicable legal requirements, and other factors. The program does not obligate NVIDIA to acquire any particular amount of common stock and the program may be suspended at any time at our discretion. As part of our share repurchase program, we have entered into, and we may continue to enter into, structured share repurchase transactions with financial institutions. These agreements generally require that we make an up-front payment in exchange for the right to receive a fixed number of shares of our common stock upon execution of the agreement, and a potential incremental number of shares of our common stock, within a pre-determined range, at the end of the term of the agreement. We did not enter into any structured share repurchase transactions or otherwise purchase any shares of our common stock during the three months ended May 2, 2010. Through May 2, 2010, we have repurchased an aggregate of 90.9 million shares under our stock repurchase program for a total cost of $1.46 billion. As of May 2, 2010, we are authorized, subject to certain specifications, to repurchase shares of our common stock up to an additional amount of $1.24 billion through May 2013.

Operating Capital and Capital Expenditure Requirements.

We believe that our existing cash balances and anticipated cash flows from operations will be sufficient to meet our operating, acquisition and capital requirements for at least the next twelve months. However, there is no assurance that we will not need to raise additional equity or debt financing within this time frame. Additional financing may not be available on favorable terms or at all and may be dilutive to our then-current stockholders. We also may require additional capital for other purposes not presently contemplated. If we are unable to obtain sufficient capital, we could be required to curtail capital equipment purchases or research and development expenditures, which could harm our business. Factors that could affect our cash used or generated from operations and, as a result, our need to seek additional borrowings or capital include:

  • decreased demand and market acceptance for our products and/or our customers’ products;
  • inability to successfully develop and produce in volume production our next-generation products;
  • competitive pressures resulting in lower than expected average selling prices; and
  • new product announcements or product introductions by our competitors.

We expect to spend approximately $100.0 million to $150.0 million for capital expenditures during the remainder of fiscal year 2011, primarily for property development, leasehold improvements, software licenses, emulation equipment, computers and engineering workstations. In addition, we may continue to use cash in connection with the acquisition of new businesses or assets.

For additional factors see “Item 1A. Risk Factors - Risks Related to Our Business, Industry and Partners - Our revenue may fluctuate while our operating expenses are relatively fixed, which makes our results difficult to predict and could cause our results to fall short of expectations.”

3dfx Asset Purchase

On December 15, 2000, NVIDIA Corporation and one of our indirect subsidiaries entered into an Asset Purchase Agreement, or APA, which closed on April 18, 2001, to purchase certain graphics chip assets from 3dfx. Under the terms of the APA, the cash consideration due at the closing was $70.0 million, less $15.0 million that was loaned to 3dfx pursuant to a Credit Agreement dated December 15, 2000. The APA also provided, subject to the other provisions thereof, that if 3dfx properly certified that all its debts and other liabilities had been provided for, then we would have been obligated to pay 3dfx one million shares, which due to subsequent stock splits now totals six million shares, of NVIDIA common stock. If 3dfx could not make such a certification, but instead properly certified that its debts and liabilities could be satisfied for less than $25.0 million, then 3dfx could have elected to receive a cash payment equal to the amount of such debts and liabilities and a reduced number of shares of our common stock, with such reduction calculated by dividing the cash payment by $25.00 per share. If 3dfx could not certify that all of its debts and liabilities had been provided for, or could not be satisfied, for less than $25.0 million, we would not be obligated under the agreement to pay any additional consideration for the assets.

In October 2002, 3dfx filed for Chapter 11 bankruptcy protection in the United States Bankruptcy Court for the Northern District of California. In March 2003, we were served with a complaint filed by the Trustee appointed by the Bankruptcy Court which sought, among other things, payments from us as additional purchase price related to our purchase of certain assets of 3dfx. In early November 2005, NVIDIA and the Official Committee of Unsecured Creditors, or the Creditors’ Committee, agreed to a Plan of Liquidation of 3dfx, which included a conditional settlement of the Trustee’s claims against us. This conditional settlement was subject to a confirmation process through a vote of creditors and the review and approval of the Bankruptcy Court. The conditional settlement called for a payment by NVIDIA of approximately $30.6 million to the 3dfx estate. Under the settlement, $5.6 million related to various administrative expenses and Trustee fees, and $25.0 million related to the satisfaction of debts and liabilities owed to the general unsecured creditors of 3dfx. Accordingly, during the three month period ended October 30, 2005, we recorded $5.6 million as a charge to settlement costs and $25.0 million as additional purchase price for 3dfx. The Trustee advised that he intended to object to the settlement.

The conditional settlement reached in November 2005 never progressed through the confirmation process and the Trustee’s case still remains pending appeal. As such, we have not reversed the accrual of $30.6 million - $5.6 million as a charge to settlement costs and $25.0 million as additional purchase price for 3dfx – that we recorded during the three months ended October 30, 2005, pending resolution of the appeal of the Trustee’s case.

Please refer to Note 12 of the Notes to the Condensed Consolidated Financial Statements for further information regarding this litigation.

Product Defect

Our products are complex and may contain defects or experience failures due to any number of issues in design, fabrication, packaging, materials and/or use within a system. If any of our products or technologies contains a defect, compatibility issue or other error, we may have to invest additional research and development efforts to find and correct the issue. Such efforts could divert our management’s and engineers’ attention from the development of new products and technologies and could increase our operating costs and reduce our gross margin. In addition, an error or defect in new products or releases or related software drivers after commencement of commercial shipments could result in failure to achieve market acceptance or loss of design wins. Also, we may be required to reimburse customers, including for customers’ costs to repair or replace the products in the field, which could cause our revenue to decline. A product recall or a significant number of product returns could be expensive, damage our reputation and could result in the shifting of business to our competitors. Costs associated with correcting defects, errors, bugs or other issues could be significant and could materially harm our financial results.

As of May 2, 2010, our Condensed Consolidated Balance Sheet included an accrued liability to cover the remaining customer warranty, repair, return, replacement and other costs arising from a weak die/packaging material set in certain versions of our previous generation MCP and GPU products used in notebook configurations. During fiscal years 2010 and 2009, we recorded a warranty charge against cost of revenue of $360.4 million for related estimated costs, offset by reimbursements from insurance carriers of $75.3 million. The weak die/packaging material combination is not used in any of our products that are currently in production.

The previous generation MCP and GPU products that are impacted were included in a number of notebook products that were shipped and sold in significant quantities. Certain notebook configurations of these products are failing in the field at higher than normal rates. While we have not been able to determine with certainty a root cause for these failures, testing suggests a weak material set of die/package combination, system thermal management designs, and customer use patterns are contributing factors. We have worked with our customers to develop and have made available for download a software driver to cause the system fan to begin operation at the powering up of the system and reduce the thermal stress on these chips. We have also recommended to our customers that they consider changing the thermal management of the products in their notebook system designs. We intend to fully support our customers in their repair and replacement of these impacted products that fail, and their other efforts to mitigate the consequences of these failures.

In September, October and November 2008, several putative class action lawsuits were filed against us, asserting various claims related to the impacted MCP and GPU products. Please refer to Note 12 of the Notes to the Condensed Consolidated Financial Statements for further information regarding this litigation.

Rambus License

In November 2008, Rambus filed a complaint alleging patent infringement against NVIDIA and other respondents with the U.S. International Trade Commission, or ITC. The complaint seeks an exclusion order barring the importation of products that allegedly infringe the Rambus patents.

The ITC has instituted an investigation and a hearing was held in October 2009. The Administrative Law Judge issued an Initial Determination in January 2010, which found the asserted claims of two patents in one patent family infringed but invalid, and the asserted claims of three patents in a separate patent family, valid, infringed and enforceable. This decision will be reviewed by the ITC. The target date by which the ITC will issue its Final Determination is May 24, 2010.

Rambus has also been subject to an investigation in the European Union. NVIDIA was not a party to that investigation. However, as a result of Rambus’ commitments to resolve that investigation, for a period of five years from the date of the resolution, Rambus must now provide a license to memory controller manufacturers, sellers and or companies that integrate memory controllers into other products. The license terms are set forth in a license made available on Rambus' website, or the Required Rambus License. NVIDIA can choose to accept those license terms at any time.

In the event that the Final Determination issued by the ITC results in an exclusion order barring the importation of certain of our products into the U.S., we may choose to accept the Required Rambus License terms. If we do choose to accept the Required Rambus License terms, we will be obligated to pay a prospective royalty to Rambus for at least one year. The Required Rambus License has a stated royalty rate of up to 2% of net sales of certain products, with a cap of $0.40 per unit. As a result, we believe that if we do choose to accept the Required Rambus License terms, the impact on our ongoing overall gross margin, depending on product mix, would range from insignificant to 0.9% of a gross margin point.

Contractual Obligations

At May 2, 2010, we had outstanding inventory purchase obligations totaling approximately $648 million. There were no other material changes in our contractual obligations from those disclosed in our Annual Report on Form 10-K for the fiscal year ended January 31, 2010. Please see Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations - Liquidity and Capital Resources” in our Annual Report on Form 10-K for a description of our contractual obligations.

Off-Balance Sheet Arrangements

As of May 2, 2010, we had no material off-balance sheet arrangements as defined in Regulation S-K 303(a)(4)(ii).

Adoption of New Accounting Pronouncements

Please see Note 1 of the Notes to Condensed Consolidated Financial Statements for a discussion of adoption of new accounting pronouncements.

Recently Issued Accounting Pronouncements

Please see Note 1 of the Notes to Condensed Consolidated Financial Statements for a discussion of recently issued accounting pronouncements.

Market risk

As filed, 5,570 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Investment and Interest Rate Risk

As of May 2, 2010 and January 31, 2010, we had $1.76 billion and $1.73 billion, respectively, in cash, cash equivalents and marketable securities. We invest in a variety of financial instruments, consisting principally of cash and cash equivalents, asset-backed securities, commercial paper, mortgage-backed securities issued by government-sponsored enterprises, equity securities, money market funds and debt securities of corporations, municipalities and the United States government and its agencies. As of May 2, 2010, we did not have any investments in auction-rate preferred securities. Our investments are denominated in United States dollars.

All of the cash equivalents and marketable securities are treated as “available-for-sale.” Investments in both fixed rate and floating rate interest earning instruments carry a degree of interest rate risk. Fixed rate securities may have their market value adversely impacted due to a rise in interest rates, while floating rate securities may produce less income than expected if interest rates fall. Due in part to these factors, our future investment income may fall short of expectations due to changes in interest rates or if the decline in fair value of our publicly traded debt or equity investments is judged to be other-than-temporary. We may suffer losses in principal if we are forced to sell securities that decline in securities market value due to changes in interest rates. However, because any debt securities we hold are classified as “available-for-sale,” no gains or losses are realized in our Condensed Consolidated Statements of Operations due to changes in interest rates unless such securities are sold prior to maturity or unless declines in value are determined to be other-than-temporary. These securities are reported at fair value with the related unrealized gains and losses included in accumulated other comprehensive income (loss), a component of stockholders’ equity, net of tax.

As of May 2, 2010, we performed a sensitivity analysis on our floating and fixed rate financial investments. According to our analysis, parallel shifts in the yield curve of both plus or minus 0.5% would result in changes in fair market values for these investments of approximately $8.0 million.

The financial turmoil that affected the banking system and financial markets and increased the possibility that financial institutions might consolidate or go out of business resulted in a tightening in the credit markets, a low level of liquidity in many financial markets, and extreme volatility in fixed income, credit, currency and equity markets. There could be a number of follow-on effects from the credit crisis on our business, including insolvency of key suppliers resulting in product delays; inability of customers, including channel partners, to obtain credit to finance purchases of our products and/or customer, including channel partner, insolvencies; and failure of financial institutions, which may negatively impact our treasury operations. Other income and expense could also vary materially from expectations depending on gains or losses realized on the sale or exchange of financial instruments; impairment charges related to debt securities as well as equity and other investments; interest rates; and cash, cash equivalent and marketable securities balances. Volatility in the financial markets and economic uncertainty increases the risk that the actual amounts realized in the future on our financial instruments could differ significantly from the fair values currently assigned to them. As of May 2, 2010, our investments in government agencies and government sponsored enterprises represented approximately 64% of our total investment portfolio, while the financial sector accounted for approximately 23% of our total investment portfolio. Of the financial sector investments, over half are guaranteed by the U.S. government. Substantially all of our investments are with A/A2 or better rated securities. If the fair value of our investments in these sectors was to decline by 2%-5%, fair market values for these investments would decline by approximately $26-$65 million.

Exchange Rate Risk

We consider our direct exposure to foreign exchange rate fluctuations to be minimal. Gains or losses from foreign currency remeasurement are included in “Other income (expense), net” in our Condensed Consolidated Financial Statements and to date have not been significant. The impact of foreign currency transaction loss included in determining net income (loss) for the first quarters of fiscal years 2011, and 2010 was $0.7 million and $0.2 million, respectively. Currently, sales and arrangements with third-party manufacturers provide for pricing and payment in United States dollars, and, therefore, are not subject to exchange rate fluctuations. Increases in the value of the United States’ dollar relative to other currencies would make our products more expensive, which could negatively impact our ability to compete. Conversely, decreases in the value of the United States’ dollar relative to other currencies could result in our suppliers raising their prices in order to continue doing business with us. Fluctuations in currency exchange rates could harm our business in the future.

We may enter into certain transactions such as forward contracts which are designed to reduce the future potential impact resulting from changes in foreign currency exchange rates. There were no forward exchange contracts outstanding at May 2, 2010.

Controls and procedures

As filed, 1,457 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Controls and Procedures

Disclosure Controls and Procedures

Based on their evaluation as of May 2, 2010, our management, including our Chief Executive Officer and Chief Financial Officer, has concluded that our disclosure controls and procedures (as defined in Rule 13a-15(e) under the Securities Exchange Act of 1934, as amended) were effective.

Changes in Internal Control Over Financial Reporting

There were no changes in our internal controls over financial reporting during our fiscal quarter ended May 2, 2010 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

Inherent Limitations on Effectiveness of Controls

Our management, including our Chief Executive Officer and Chief Financial Officer, does not expect that our disclosure controls and procedures or our internal controls, will prevent all error and all fraud. A control system, no matter how well conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within NVIDIA have been detected.

Risk factors

As filed, 80,395 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

In evaluating NVIDIA and our business, the following factors should be considered in addition to the other information in this Quarterly Report on Form 10-Q. Before you buy our common stock, you should know that making such an investment involves some risks including, but not limited to, the risks described below. Additionally, any one of the following risks could seriously harm our business, financial condition and results of operations, which could cause our stock price to decline. Additional risks and uncertainties not presently known to us or that we currently deem immaterial may also impair our business operations.

Risks Related to Our Business, Industry and Partners

We depend on foundries to manufacture our products and these third parties may not be able to satisfy our manufacturing requirements, which would harm our business.

We do not manufacture the silicon wafers used for our products and do not own or operate a wafer fabrication facility. Instead, we are dependent on industry-leading foundries, such as Taiwan Semiconductor Manufacturing Corporation, or TSMC, to manufacture our semiconductor wafers using their fabrication equipment and techniques. A substantial portion of our wafers are supplied by TSMC. The foundries, which have limited capacity, also manufacture products for other semiconductor companies, including some of our competitors. Since we do not have long-term commitment contracts with any of these foundries, they do not have an obligation to provide us with any minimum quantity of product at any time except as may be provided in a specific purchase order. Most of our products are only manufactured by one foundry at a time. In times of high demand, the foundries could choose to prioritize their capacity for other companies, reduce or eliminate deliveries to us, or increase the prices that they charge us. If we are unable to meet customer demand due to reduced or eliminated deliveries or have to increase the prices of our products, we could lose sales to customers, which would negatively impact our revenue and our reputation. For example, revenue during the first quarter of fiscal year 2011 was somewhat limited by supply constraints related to 40nm products. These supply constraints were driven by limited 40nm wafer foundry capacity as well as challenges related to 40nm process manufacturing yields. As a result, we have been forced to allocate our available 40nm product supply among our customers. We expect such supply constraints could have a further limiting impact on our revenue for the second quarter of fiscal year 2011.

Because the lead-time needed to establish a strategic relationship with a new manufacturing partner and achieve initial production could be over a year, we do not have an alternative source of supply for our products. In addition, the time and effort to qualify a new foundry would result in additional expense, diversion of resources, and could result in lost sales, any of which would negatively impact our financial results. We believe that long-term market acceptance for our products will depend on reliable relationships with the third-party manufacturers we use to ensure adequate product supply and competitive pricing to respond to customer demand.

If our third-party foundries are not able to transition to new manufacturing process technologies or develop, obtain or successfully implement high quality, leading-edge process technologies our operating results and gross margin could be adversely affected.

We use the most advanced manufacturing process technology appropriate for our products that is available from our third-party foundries. As a result, we continuously evaluate the benefits of migrating our products to smaller geometry process technologies in order to improve performance and reduce costs. We believe this strategy will help us remain competitive. Our current product families are manufactured using 0.15 micron, 0.14 micron, 0.13 micron, 0.11 micron, 90 nanometer, 65 nanometer, 55 nanometer and 40 nanometer process technologies. Manufacturing process technologies are subject to rapid change and require significant expenditures for research and development, which could negatively impact our operating expenses and gross margin.

We have experienced difficulty in migrating to new manufacturing processes in the past and, consequently, have suffered reduced yields, delays in product deliveries and increased expense levels. We may face similar difficulties, delays and expenses as we continue to transition our new products to smaller geometry processes. Moreover, we are dependent on our third-party manufacturers to invest sufficient funds in new manufacturing processes in order to have ample capacity for all of their customers and to develop the processes in a timely manner. Our product cycles may also depend on our third-party manufacturers migrating to smaller geometry processes successfully and in time for us to meet our customer demands. Some of our competitors own their manufacturing facilities and may be able to move to a new state of the art manufacturing process more quickly or more successfully than our manufacturing partners. If our suppliers fall behind our competitors in manufacturing processes, the development and customer demand for our products and the use of our products could be negatively impacted. If we are forced to use larger geometric processes in manufacturing a product than our competition, our gross margin may be reduced. The inability by us or our third-party manufacturers to effectively and efficiently transition to new manufacturing process technologies may adversely affect our operating results and our gross margin.

We cannot be certain that our third-party foundries will be able to develop, obtain or successfully implement high quality, leading-edge process technologies needed to manufacturer our products profitably or on a timely basis or that our competitors (including those that own their own manufacturing facilities) will not develop such high quality, leading-edge process technologies earlier. If our third party-foundries experience manufacturing inefficiencies, we may fail to achieve acceptable yields or experience product delivery delays. If our third-party foundries fall behind our competitors (including those that own their own manufacturing facilities), the development and customer demand for our products and the use of our products could be negatively impacted. Additionally, we cannot be certain that our third-party foundries will manufacturer our products at a price that is competitive to what our competitors pay. If our third-party foundries do not charge us a competitive price, our operating results and gross margin will be negatively impacted.

Failure to achieve expected manufacturing yields for our products could negatively impact our financial results and damage our reputation.

Manufacturing yields for our products are a function of product design, which is developed largely by us, and process technology, which typically is proprietary to the manufacturer. Low yields may result from either product design or process technology failure. We do not know a yield problem exists until our design is manufactured. When a yield issue is identified, the product is analyzed and tested to determine the cause. As a result, yield problems may not be identified until well into the production process. Resolution of yield problems requires cooperation by, and communication between, us and the manufacturer. Because of our potentially limited access to wafer foundry capacity, decreases in manufacturing yields could result in an increase in our costs and force us to allocate our available product supply among our customers. Lower than expected yields could potentially harm customer relationships, our reputation and our financial results.

Global economic conditions may adversely affect our business and financial results.

Our operations and performance depend significantly on worldwide economic conditions. Uncertainty about current global economic conditions poses a continuing risk to our business as consumers and businesses have postponed spending in response to tighter credit, negative financial news and/or declines in income or asset values, which have reduced the demand for our products. Other factors that could depress demand for our products in the future include conditions in the residential real estate and mortgage markets, expectations for inflation, labor and healthcare costs, access to credit, consumer confidence, and other macroeconomic factors affecting consumer and business spending behavior. These and other economic factors have reduced demand for our products in the past and could further harm our business, financial condition and operating results.

The financial turmoil that affected the banking system and financial markets and the increased possibility that financial institutions may consolidate or go out of business resulted in a tightening in the credit markets, a low level of liquidity in many financial markets, and extreme volatility in fixed income, credit, currency and equity markets. There could be a number of follow-on effects from the credit crisis on our business, including insolvency of key suppliers resulting in product delays; inability of customers, including channel partners, to obtain credit to finance purchases of our products and/or customer, including channel partner, insolvencies; and failure of financial institutions, which may negatively impact our treasury operations. Other income and expense could also vary materially from expectations depending on gains or losses realized on the sale or exchange of financial instruments; impairment charges related to debt securities as well as equity and other investments; interest rates; and cash, cash equivalent and marketable securities balances. Volatility in the financial markets and overall economic uncertainty increases the risk that the actual amounts realized in the future on our financial instruments could differ significantly from the fair values currently assigned to them.

Our business is cyclical in nature and has experienced severe downturns that have, and may in the future, materially adversely affect our business and financial results.

Our business is directly affected by market conditions in the highly cyclical semiconductor industry. The semiconductor industry has been adversely affected by many factors, including the global downturn, ongoing efforts by our customers to reduce their spending, diminished product demand, increased inventory levels, lower average selling prices, uncertainty regarding long-term growth rates and underlying financial health and increased competition. These factors, could, among other things, limit our ability to maintain or increase our sales or recognize revenue and in turn adversely affect our business, operating results and financial condition. If our actions to reduce our operating expenses to sufficiently offset these factors when they occur are unsuccessful, our operating results will suffer.

Our failure to estimate customer demand properly could adversely affect our financial results.

We manufacture our products based on forecasts of customer demand in order to have shorter shipment lead times and quicker delivery schedules for our customers. As a result, we may build inventories for anticipated periods of growth which do not occur or may build inventory anticipating demand for a product that does not materialize. In forecasting demand, we make multiple assumptions any of which may prove to be incorrect. Situations that may result in excess or obsolete inventory include:

  • changes in business and economic conditions, including downturns in the semiconductor industry and/or overall economy;
  • changes in consumer confidence caused by changes in market conditions, including changes in the credit market, expectations for inflation, and energy prices;
  • if there were a sudden and significant decrease in demand for our products;
  • if there were a higher incidence of inventory obsolescence because of rapidly changing technology and customer requirements;
  • if we fail to estimate customer demand properly for our older products as our newer products are introduced; or
  • if our competition were to take unexpected competitive pricing actions.

Any inability to sell products to which we have devoted resources could harm our business. In addition, cancellation or deferral of customer purchase orders could result in our holding excess inventory, which could adversely affect our gross margin and restrict our ability to fund operations. Additionally, because we often sell a substantial portion of our products in the last month of each quarter, we may not be able to reduce our inventory purchase commitments in a timely manner in response to customer cancellations or deferrals. We could be subject to excess or obsolete inventories and be required to take corresponding inventory write-downs and/or a reduction in average selling prices if growth slows or does not materialize, or if we incorrectly forecast product demand, which could negatively impact our financial results.

Conversely, if we underestimate our customers’ demand for our products, our third party manufacturing partners may not have adequate lead-time or capacity to increase production for us meaning that we may not be able to obtain sufficient inventory to fill our customers’ orders on a timely basis. Even if we are able to increase production levels to meet customer demand, we may not be able to do so in a cost effective or timely manner. Inability to fulfill our customers’ orders on a timely basis, or at all, could damage our customer relationships, result in lost revenue, cause a loss in market share, impact our customer relationships or damage our reputation, any of which could adversely impact our business.

Because our gross margin for any period depends on a number of factors, our failure to forecast changes in any of these factors could adversely affect our gross margin.

We are focused on improving our gross margin. Our gross margin for any period depends on a number of factors, including:

  • the mix of our products sold;
  • average selling prices;
  • introduction of new products;
  • product transitions;
  • sales discounts;
  • unexpected pricing actions by our competitors;
  • the cost of product components; and
  • the yield of wafers produced by the foundries that manufacture our products.

If we do not correctly forecast the impact of any of the relevant factors on our business, there may not be any actions we can take or we may not be able to take any possible actions in time to counteract any negative impact on our gross margin. In addition, if we are unable to meet our gross margin target for any period or the target set by analysts, the trading price of our common stock may decline.

Our revenue may fluctuate while our operating expenses are relatively fixed, which makes our results difficult to predict and could cause our results to fall short of expectations.

Demand for many of our revenue components fluctuates and is difficult to predict, and our operating expenses are relatively fixed and largely independent of revenue. Therefore, it is difficult for us to accurately forecast revenue and profits or losses in any particular period. Our operating expenses, which are comprised of research and development expenses and sales, general and administrative expenses represented 31% and 63%, of our total revenue for the first quarters of fiscal years 2011 and 2010, respectively. Since we often recognize a substantial portion of our revenue in the last month of each quarter, we may not be able to adjust our operating expenses in a timely manner in response to any unanticipated revenue shortfalls in any quarter. Further, some of our operating expenses, like stock-based compensation expense, can only be adjusted over a longer period of time and cannot be reduced during a quarter. If we are unable to reduce operating expenses quickly in response to any revenue shortfalls, our financial results will be negatively impacted.

Any one or more of the risks discussed in this Quarterly Report on Form 10-Q or other factors could prevent us from achieving our expected future revenue or net income. Accordingly, we believe that period-to-period comparisons of our results of operations should not be relied upon as an indication of future performance. Similarly, the results of any quarterly or full fiscal year period are not necessarily indicative of results to be expected for a subsequent quarter or a full fiscal year. As a result, it is possible that in some quarters our operating results could be below the expectations of securities analysts or investors, which could cause the trading price of our common stock to decline. We believe that our quarterly and annual results of operations may continue to be affected by a variety of factors that could harm our revenue, gross profit and results of operations.

If we are unable to compete in the markets for our products, our financial results could be adversely impacted.

The market for our products is characterized by rapid technological change, new product introductions, evolving industry standards and declining average selling prices. We believe that the principal competitive factors in this market are performance, breadth of product offerings, access to customers and distribution channels, software support, conformity to industry standard Application Programming Interface, or APIs, manufacturing capabilities, price of processors, and total system costs. We believe that our ability to remain competitive will depend on how well we are able to anticipate the features and functions that customers will demand and whether we are able to deliver consistent volumes of our products at acceptable levels of quality and at competitive prices. We expect competition to increase from both existing competitors and new market entrants with products that may be less costly than ours, or may provide better performance or additional features not provided by our products. In addition, it is possible that new competitors or alliances among competitors could emerge and acquire significant market share. We believe other factors impacting our ability to compete are:

  • product performance;
  • product bundling by competitors with multiple product lines;
  • breadth and frequency of product offerings;
  • access to customers and distribution channels;
  • backward-forward software support;
  • conformity to industry standard application programming interfaces; and
  • manufacturing capabilities.

For example, our MCP products are currently used with both Intel and AMD processors. If we are unable to sell our MCP products for use with certain Intel and AMD processors, we may not be able to successfully compete and our business would be negatively impacted.

A significant source of competition is from companies that provide or intend to provide GPUs and mobile and consumer products. Some of our competitors may have greater marketing, financial, distribution and manufacturing resources than we do and may be more able to adapt to customer or technological changes.

Our current competitors include the following:

  • suppliers of GPUs, including chipsets, that incorporate 3D graphics functionality as part of their existing solutions, such as AMD, Intel, Matrox Electronics Systems Ltd., SIS, and VIA; and
  • suppliers of system-on-a-chip products that support tablets, netbooks, PNDs, PMPs, PDAs, cellular phones, handheld devices or embedded devices such as AMD, Broadcom, Freescale Semiconductor Inc., Fujitsu Limited, Imagination Technologies Ltd., Intel, ARM Holdings plc, Marvell Technology Group Ltd, or Marvell, NEC Corporation, Qualcomm Incorporated, Renesas Technology, Samsung, Seiko-Epson, ST Microelectronics, Texas Instruments Incorporated, and Toshiba America, Inc.;

If and to the extent we offer products in new markets, we may face competition from some of our existing competitors as well as from companies with which we currently do not compete. For example, in the case of our CPB, our Tegra products primarily compete in tablets, smartbooks, smartphones and other handheld consumer devices. We cannot accurately predict if we will compete successfully in any of the new markets we may enter. If we are unable to compete in our current or new markets, demand for our products could decrease which could cause our revenue to decline and our financial results to suffer.

We are dependent on the personal computer market and its rate of growth in the future may have a negative impact on our business.

We derive and expect to continue to derive the majority of our revenue from the sale or license of products for use in the desktop personal computer, or PC, and notebook PC markets, including professional workstations. A reduction in sales of PCs, or a reduction in the growth rate of PC sales, may reduce demand for our products. These changes in demand could be large and sudden. Since PC manufacturers often build inventories during periods of anticipated growth, they may be left with excess inventories if growth slows or if they incorrectly forecast product transitions. In these cases, PC manufacturers may abruptly suspend substantially all purchases of additional inventory from suppliers like us until their excess inventory has been absorbed, which would have a negative impact on our financial results.

As Intel and AMD continue to pursue platform solutions, we may not be able to successfully compete and our business would be negatively impacted.

We expect substantial competition from both Intel’s and AMD’s strategy of selling platform solutions, such as the success Intel achieved with its Centrino platform solution. AMD has also announced a platform solution. Additionally, Intel and AMD have each announced its intention to integrate a central processing unit, or CPU, and a GPU on the same chip or same package, as evidenced by AMD’s announcement of its Fusion processor project and Intel’s announcement of its multichip packaged solution codenamed Arrandale. If AMD and Intel continue to pursue platform solutions, we may not be able to successfully compete and our business would be negatively impacted.

Our business results could be adversely affected if the identification and development of new products or entry into or development of a new market is delayed or unsuccessful.

In order to maintain or improve our financial results, we will need to continue to identify and develop new products as well as identify and enter new markets. As our GPUs and other processors develop and competition increases, we anticipate that product life cycles at the high end will remain short and average selling prices will decline. In particular, average selling prices and gross margins for our GPUs and other processors could decline as each product matures and as unit volume increases. As a result, we will need to introduce new products and enhancements to existing products to maintain or improve overall average selling prices, our gross margin and our financial results. We believe the success of our new product introductions will depend on many factors outlined elsewhere in these risk factors as well as the following:

  • market demand for new products and enhancements to existing products;
  • timely completion and introduction of new product designs and new opportunities for existing products;
  • seamless transitions from an older product to a new product;
  • differentiation of our new products from those of our competitors;
  • delays in volume shipments of our products;
  • market acceptance of our products instead of our customers' products; and
  • availability of adequate quantity and configurations of various types of memory products.

In the past, we have experienced delays in the development and adoption of new products and have been unable to successfully manage product transitions from older to newer products resulting in obsolete inventory.

To be successful, we must also enter new markets or develop new uses for our future or existing products. We cannot accurately predict if our current or existing products or technologies will be successful in the new opportunities or markets that we identify for them or that we will compete successfully in any new markets we may enter. For example, we have developed products and other technology in order for certain general-purpose computing operations to be performed on a GPU rather than a CPU. This general purpose computing, which is often referred to as GP computing, was a new use for the GPU which had been entirely used for graphics rendering. During fiscal year 2008, we introduced our NVIDIA Tesla family of products, which was our entry into the high-performance computing industry, a new market for us. During fiscal year 2010, we introduced our next generation CUDA GPU architecture, codenamed “Fermi,” which we expect to be the foundation for computational GPUs and enable breakthroughs in both graphics and parallel computing. Some of our competitors, including Intel, are now developing their own solutions for the discrete graphics and computing markets. Our failure to successfully develop, introduce or achieve market acceptance for new GPUs, other products or other technologies or to enter into new markets or identify new uses for existing or future products, could result in rapidly declining average selling prices, reduced demand for our products or loss of market share any of which could cause our revenue, gross margin and overall financial results to suffer.

If we are unable to achieve design wins, our products may not be adopted by our target markets or customers either of which could negatively impact our financial results.

The success of our business depends to a significant extent on our ability to develop new competitive products for our target markets and customers. We believe achieving design wins, which entails having our existing and future products chosen for hardware components or subassemblies designed by OEMs, ODMs, add-in board and motherboard manufacturers, is an integral part of our future success. Our OEM, ODM, and add-in board and motherboard manufacturers’ customers typically introduce new system configurations as often as twice per year, typically based on spring and fall design cycles or in connection with trade shows. Accordingly, when our customers are making their design decisions, our existing products must have competitive performance levels or we must timely introduce new products in order to be included in our customers’ new system configurations. This requires that we:

  • anticipate the features and functionality that customers and consumers will demand;
  • incorporate those features and functionalities into products that meet the exacting design requirements of our customers;
  • price our products competitively; and
  • introduce products to the market within our customers’ limited design cycles.

If OEMs, ODMs, and add-in board and motherboard manufacturers do not include our products in their systems, they will typically not use our products in their systems until at least the next design configuration. Therefore, we endeavor to develop close relationships with our OEMs and ODMs, in an attempt to better anticipate and address customer needs in new products so that we will achieve design wins.

Our ability to achieve design wins also depends in part on our ability to identify and be compliant with evolving industry standards. Unanticipated changes in industry standards could render our products incompatible with products developed by major hardware manufacturers and software developers like AMD, Intel and Microsoft Corporation, or Microsoft. If our products are not in compliance with prevailing industry standards, we may not be designed into our customers’ product designs. However, to be compliant with changes to industry standards, we may have to invest significant time and resources to redesign our products which could negatively impact our gross margin or operating results. If we are unable to achieve new design wins for existing or new customers, we may lose market share and our operating results would be negatively impacted.

If our products do not continue to be adopted by our target markets or if the demand for new and innovative products in our target markets decreases, our business and operating results would suffer.

Our success depends in part upon continued broad adoption of our processors for 3D graphics and multimedia in desktop PC, notebook PC, workstation, high-performance computing, netbooks, smartbooks, tablets, smartphones, and video game console applications. The market for processors has been characterized by unpredictable and sometimes rapid shifts in the popularity of products, often caused by the publication of competitive industry benchmark results, changes in pricing of dynamic random-access memory devices and other changes in the total system cost of add-in boards, as well as by severe price competition and by frequent new technology and product introductions. Broad market acceptance is difficult to achieve and such market acceptance, if achieved, is difficult to sustain due to intense competition and frequent new technology and product introductions. As such, our financial results would suffer if for any reason our products do not continue to achieve widespread adoption by the market. If we are unable to complete the timely development of new products or if we were unable to successfully and cost-effectively manufacture and deliver products that meet the requirements of the desktop PC, notebook PC, workstation, high-performance computing, netbook, smartbooks, tablets, smartphones, and video game console markets, we may experience a decrease in revenue which could negatively impact our operating results.

Additionally, there can be no assurance that the industry will continue to demand new products with improved standards, features or performance. If our customers, OEMs, ODMs, add-in-card and motherboard manufacturers, system builders and consumer electronics companies, do not continue to design products that require more advanced or efficient processors and/or the market does not continue to demand new products with increased performance, features, functionality or standards, sales of our products could decline and the markets for our products could shrink. Decreased sales of our products for these markets could negatively impact our revenue and our financial results.

If our products contain significant defects our financial results could be negatively impacted, our reputation could be damaged and we could lose market share.

Our products are complex and may contain defects or experience failures due to any number of issues in design, fabrication, packaging, materials and/or use within a system. If any of our products or technologies contains a defect, compatibility issue or other error, we may have to invest additional research and development efforts to find and correct the issue. Such efforts could divert our engineers’ attention from the development of new products and technologies and could increase our operating costs and reduce our gross margin. In addition, an error or defect in new products or releases or related software drivers after commencement of commercial shipments could result in failure to achieve market acceptance or loss of design wins. Also, we may be required to reimburse customers, including our customers’ costs to repair or replace products in the field. A product recall or a significant number of product returns could be expensive, damage our reputation, could result in the shifting of business to our competitors and could result in litigation against us. Costs associated with correcting defects, errors, bugs or other issues could be significant and could materially harm our financial results. For example, during fiscal year 2010, we recorded an additional net warranty charge of $95.8 million against cost of revenue to cover anticipated customer warranty, repair, return, replacement and other costs arising from a weak die/packaging material set in certain versions of our previous generation MCP and GPU products used in notebook configurations. This charge included an additional accrual of $164.4 million for related estimated costs, offset by reimbursements from insurance carriers of $68.6 million that we recorded against cost of revenue during fiscal year 2010. During fiscal year 2009, we recorded a net warranty charge of $189.3 million charge against cost of revenue for the purpose of supporting the product repair costs of our affected customers around the world. This charge included an accrual of $196.0 million for related estimated costs, offset by reimbursements from insurance carriers of $6.7 million that we recorded against cost of revenue during fiscal year 2009. In September, October and November 2008, several putative class action lawsuits were filed against us, asserting various claims related to the impacted MCP and GPU products. Please refer to the risk entitled “We are subject to litigation arising from alleged defects in our previous generation MCP and GPU products, which if determined adversely to us, could harm our business” for the risk associated with this litigation.

We may have to invest more resources in research and development than anticipated, which could increase our operating expenses and negatively impact our operating results.

If new competitors, technological advances by existing competitors, our entry into new markets, or other competitive factors require us to invest significantly greater resources than anticipated in our research and development efforts, our operating expenses would increase. Our engineering and technical resources included 3,971 full-time employees as of May 2, 2010 and 3,816 employees as of April 26, 2009, respectively. Research and development expenditures were $218.1 million and $301.8 million for the first quarters of fiscal years 2011 and 2010, respectively. Research and development expenses included stock-based compensation expense of $14.6 million and $21.3 million during the first quarters of fiscal years 2011 and 2010, respectively. Additionally, during the first quarter of fiscal year 2010, research and development expenses included stock-based compensation of $90.5 million related to the purchase of certain outstanding options that were tendered in March 2009. If we are required to invest significantly greater resources than anticipated in research and development efforts without a corresponding increase in revenue, our operating results could decline. Research and development expenses are likely to fluctuate from time to time to the extent we make periodic incremental investments in research and development and these investments may be independent of our level of revenue which could negatively impact our financial results. In order to remain competitive, we anticipate that we will continue to devote substantial resources to research and development, and we expect these expenses to increase in absolute dollars in the foreseeable future due to the increased complexity and the greater number of products under development.

We are dependent on third parties for assembly, testing and packaging of our products, which reduces our control over the delivery schedule, product quantity or product quality.

Our products are assembled, tested and packaged by independent subcontractors, such as Advanced Semiconductor Engineering, Inc., Amkor Technology, JSI Logistics, Ltd., King Yuan Electronics Co., Siliconware Precision Industries Co. Ltd., and ChipPAC. As a result, we do not directly control our product delivery schedules, product quantity, or product quality. All of these subcontractors assemble, test and package products for other companies, including some of our competitors. Since we do not have long-term agreements with our subcontractors, when demand for subcontractors to assemble, test or package products is high, our subcontractors may decide to prioritize the orders of other customers over our orders. Since the time required to qualify a different subcontractor to assemble, test or package our products can be lengthy, if we have to find a replacement subcontractor we could experience significant delays in shipments of our products, product shortages, a decrease in the quality of our products, or an increase in product cost. Any product shortages or quality assurance problems could increase the costs of manufacture, assembly or testing of our products, which could cause our gross margin and revenue to decline.

We rely on third-party vendors to supply software development tools to us for the development of our new products and we may be unable to obtain the tools necessary to develop or enhance new or existing products.

We rely on third-party software development tools to assist us in the design, simulation and verification of new products or product enhancements. To bring new products or product enhancements to market in a timely manner, or at all, we need software development tools that are sophisticated enough or technologically advanced enough to complete our design, simulations and verifications. In the past, we have experienced delays in the introduction of products as a result of the inability of then available software development tools to fully simulate the complex features and functionalities of our products. In the future, the design requirements necessary to meet consumer demands for more features and greater functionality from our products may exceed the capabilities of available software development tools. Unavailability of software development tools may result in our missing design cycles or losing design wins, either of which could result in a loss of market share or negatively impact our operating results.

Because of the importance of software development tools to the development and enhancement of our products, a critical component of our product development efforts is our partnerships with leaders in the computer-aided design industry, including Cadence Design Systems, Inc. and Synopsys, Inc. We have invested significant resources to develop relationships with these industry leaders and have often assisted them in the definition of their new products. We believe that forming these relationships and utilizing next-generation development tools to design, simulate and verify our products will help us remain at the forefront of the 3D graphics, communications and networking segments and develop products that utilize leading-edge technology on a rapid basis. If these relationships are not successful, we may be unable to develop new products or product enhancements in a timely manner, which could result in a loss of market share, a decrease in revenue or negatively impact our operating results.

We sell our products to a small number of customers and our business could suffer if we lose any of these customers.

We have a limited number of customers and our sales are highly concentrated. For the first quarters of fiscal years 2011 and 2010, aggregate sales to customers in excess of 10% of our total revenue accounted for approximately 28% of total revenue from two customers and approximately 22% of total revenue from two customers, respectively. Although a small number of our other customers represent the majority of our revenue, their end customers include a large number of OEMs, and system integrators throughout the world who, in many cases, specify the graphics supplier. Our sales process involves achieving key design wins with leading PC, OEMs and major system builders and supporting the product design into high volume production with key contract equipment manufacturers, or CEMs, ODMs, add-in board and motherboard manufacturers. These design wins in turn influence the retail and system builder channel that is serviced by CEMs, ODMs, add-in board and motherboard manufacturers. Our distribution strategy is to work with a small number of leading independent CEMs, ODMs, add-in board and motherboard manufacturers, and distributors, each of which has relationships with a broad range of system builders and leading PC OEMs. If we were to lose sales to our PC OEMs, CEMs, ODMs, add-in board manufacturers and motherboard manufacturers and were unable to replace the lost sales with sales to different customers, if they were to significantly reduce the number of products they order from us, or if we were unable to collect accounts receivable from them, our revenue may not reach or exceed the expected level in any period, which could harm our financial condition and our results of operations.

Any difficulties in collecting accounts receivable, including from foreign customers, could harm our operating results and financial condition.

Our accounts receivable are highly concentrated and make us vulnerable to adverse changes in our customers’ businesses, and to downturns in the industry and the worldwide economy. We recorded approximately 27% of our accounts receivable balance from two customers at May 2, 2010 and approximately 20% of our accounts receivable balance from two customers at January 31, 2010.

Difficulties in collecting accounts receivable could materially and adversely affect our financial condition and results of operations. These difficulties are heightened during periods when economic conditions worsen. We continue to work directly with more foreign customers and it may be difficult to collect accounts receivable from them. We maintain an allowance for doubtful accounts for estimated losses resulting from the inability of our customers to make required payments. This allowance consists of an amount identified for specific customers and an amount based on overall estimated exposure. If the financial condition of our customers were to deteriorate, resulting in an impairment in their ability to make payments, additional allowances may be required, we may be required to defer revenue recognition on sales to affected customers, and we may be required to pay higher credit insurance premiums, any of which could adversely affect our operating results. In the future, we may have to record additional reserves or write-offs and/or defer revenue on certain sales transactions which could negatively impact our financial results.

We obtain credit insurance over the purchasing credit extended to certain customers. As a result of the tightening of the credit markets, we may not be able to acquire credit insurance on the credit we extend to these customers or in amounts that we deem sufficient. While we have procedures to monitor and limit exposure to credit risk on our accounts receivable, there can be no assurance such procedures will effectively limit our credit risk or avoid losses, which could harm our financial condition or operating results.

We are subject to risks associated with international operations which may harm our business.

We conduct our business worldwide. Our semiconductor wafers are manufactured, assembled, tested and packaged by third-parties located outside of the United States and other Americas. We generated 85% and 82% of our revenue for the first quarters of fiscal years 2011 and 2010, respectively, from sales to customers outside the United States and other Americas. As of May 2, 2010, we had offices in fifteen countries outside of the United States. The manufacture, assembly, test and packaging of our products outside of the United States, operation of offices outside of the United States, and sales to customers internationally subjects us to a number of risks, including:

  • international economic and political conditions, such as political tensions between countries in which we do business;
  • unexpected changes in, or impositions of, legislative or regulatory requirements;
  • complying with a variety of foreign laws;
  • differing legal standards with respect to protection of intellectual property and employment practices;
  • cultural differences in the conduct of business;
  • inadequate local infrastructure that could result in business disruptions;
  • exporting or importing issues related to export or import restrictions, tariffs, quotas and other trade barriers and restrictions;
  • financial risks such as longer payment cycles, difficulty in collecting accounts receivable and fluctuations in currency exchange rates;
  • imposition of additional taxes and penalties; and
  • other factors beyond our control such as terrorism, civil unrest, war and diseases such as severe acute respiratory syndrome and the Avian flu.

If sales to any of our customers outside of the United States and other Americas are delayed or cancelled because of any of the above factors, our revenue may be negatively impacted.

Our international operations in Australia, China, Finland, France, Germany, Hong Kong, India, Japan, Korea, Russia, Singapore, Sweden, Switzerland, Taiwan, and the United Kingdom are subject to many of the above listed risks. Difficulties with our international operations, including finding appropriate staffing and office space, may divert management’s attention and other resources any of which could negatively impact our operating results.

The economic conditions in our primary overseas markets, particularly in Asia, may negatively impact the demand for our products abroad. All of our international sales to date have been denominated in United States dollars. Accordingly, an increase in the value of the United States dollar relative to foreign currencies could make our products less competitive in international markets or require us to assume the risk of denominating certain sales in foreign currencies. We anticipate that these factors will impact our business to a greater degree as we further expand our international business activities.

Conditions outside the control of our independent subcontractors and manufacturers may impact their business operations and thereby adversely interrupt our manufacturing and sales processes.

The economic, market, social, and political situations in countries where certain independent subcontractors and manufacturers are located are unpredictable, can be volatile, and can have a significant impact on our business because we may be unable to obtain or distribute product in a timely manner. Market and political conditions, including currency fluctuation, terrorism, political strife, war, labor disruption, and other factors, including natural or man-made disasters, adverse changes in tax laws, tariff, import or export quotas, power and water shortages, or interruption in air transportation, in areas where our independent subcontractors and manufacturers are located could also have a severe negative impact on our operating capabilities. For example, because we rely heavily on TSMC to produce a significant portion of our silicon wafers, earthquakes, typhoons or other natural disasters in Taiwan and Asia could limit our wafer supply and thereby harm our business, financial condition, and operational results.

We are dependent on key employees and the loss of any of these employees could negatively impact our business.

Our future success and ability to compete is substantially dependent on our ability to identify, hire, train and retain highly qualified key personnel. The market for key employees in the technology industry can be competitive. None of our key employees is bound by an employment agreement, meaning our relationships with all of our key employees are at will. The loss of the services of any of our other key employees without an adequate replacement or our inability to hire new employees as needed could delay our product development efforts, harm our ability to sell our products or otherwise negatively impact our business.

In addition, we rely on stock-based awards as one means for recruiting, motivating and retaining highly skilled talent. If the value of such stock awards does not appreciate as measured by the performance of the price of our common stock or if our share-based compensation otherwise ceases to be viewed as a valuable benefit, our ability to attract, retain, and motivate employees could be weakened, which could harm our results of operations.

We may not be able to realize the potential financial or strategic benefits of business acquisitions or strategic investments, which could hurt our ability to grow our business, develop new products or sell our products.

We have acquired and invested in other businesses that offered products, services and technologies that we believe will help expand or enhance our existing products and business. We may enter into future acquisitions of, or investments in, businesses, in order to complement or expand our current businesses or enter into a new business market. Negotiations associated with an acquisition or strategic investment could divert management’s attention and other company resources. Any of the following risks associated with past or future acquisitions or investments could impair our ability to grow our business, develop new products, our ability to sell our products, and ultimately could have a negative impact on our growth or our financial results:

  • difficulty in combining the technology, products, operations or workforce of the acquired business with our business;
  • difficulty in operating in a new or multiple new locations;
  • disruption of our ongoing businesses or the ongoing business of the company we invest in or acquire;
  • difficulty in realizing the potential financial or strategic benefits of the transaction;
  • difficulty in maintaining uniform standards, controls, procedures and policies;
  • disruption of or delays in ongoing research and development efforts;
  • diversion of capital and other resources;
  • assumption of liabilities;
  • diversion of resources and unanticipated expenses resulting from litigation arising from potential or actual business acquisitions or investments;
  • difficulties in entering into new markets in which we have limited or no experience and where competitors in such markets have stronger positions; and
  • impairment of relationships with employees and customers, or the loss of any of our key employees or customers our target’s key employees or customers, as a result of our acquisition or investment.

In addition, the consideration for any future acquisition could be paid in cash, shares of our common stock, the issuance of convertible debt securities or a combination of cash, convertible debt and common stock. If we make an investment in cash or use cash to pay for all or a portion of an acquisition, our cash reserves would be reduced which could negatively impact the growth of our business or our ability to develop new products. However, if we pay the consideration with shares of common stock, or convertible debentures, the holdings of our existing stockholders would be diluted. The significant decline in the trading price of our common stock would make the dilution to our stockholders more extreme and could negatively impact our ability to pay the consideration with shares of common stock or convertible debentures. We cannot forecast the number, timing or size of future strategic investments or acquisitions, or the effect that any such investments or acquisitions might have on our operations or financial results.

We are exposed to credit risk, fluctuations in the market values of our portfolio investments and in interest rates.

All of our cash equivalents and marketable securities are treated as “available-for-sale” securities. Investments in both fixed rate instruments and floating rate interest earning instruments carry a degree of interest rate risk. Fixed rate securities may have their market value adversely impacted due to a rise in interest rates, while floating rate securities may produce less income than expected if interest rates fall. Due in part to these factors, our future investment income may fall short of expectations due to changes in interest rates or if the decline in fair value of our publicly traded debt or equity investments is judged to be other-than-temporary. We may suffer losses in principal if we are forced to sell securities that decline in securities market value due to changes in interest rates. Future declines in the market values of our cash, cash equivalents and marketable securities could have a material adverse effect on our financial condition and operating results.

At May 2, 2010, we had $1.76 billion in cash, cash equivalents and marketable securities. Given the global nature of our business, we have invested both domestically and internationally. All of our investments are denominated in United States dollars. We invest in a variety of financial instruments, consisting principally of cash and cash equivalents, asset-backed securities, commercial paper, mortgage-backed securities issued by Government-sponsored enterprises, equity securities, money market funds and debt securities of corporations, municipalities and the United States government and its agencies. As of May 2, 2010, we did not have any investments in auction-rate preferred securities.

The financial turmoil that affected the banking system and financial markets and the increased possibility that financial institutions might consolidate or go out of business resulted in a tightening in the credit markets, a low level of liquidity in many financial markets, and extreme volatility in fixed income, credit, currency and equity markets. There could be a number of follow-on effects from the credit crisis on our business, including insolvency of key suppliers resulting in product delays; inability of customers, including channel partners, to obtain credit to finance purchases of our products and/or customer, including channel partner, insolvencies; and failure of financial institutions, which may negatively impact our treasury operations. Other income and expense could also vary materially from expectations depending on gains or losses realized on the sale or exchange of financial instruments; impairment charges related to debt securities as well as equity and other investments; interest rates; and cash, cash equivalent and marketable securities balances. Volatility in the financial markets and economic uncertainty increases the risk that the actual amounts realized in the future on our financial instruments could differ significantly from the fair values currently assigned to them. As of May 2, 2010, our investments in government agencies and government sponsored enterprises represented approximately 64% of our total investment portfolio, while the financial sector accounted for approximately 23% of our total investment portfolio. Of the financial sector investments, over half are guaranteed by the U.S. government. Substantially all of our investments are with A/A2 or better rated securities. If the fair value of our investments in these sectors was to decline by 2%-5%, fair market values for these investments would decrease by approximately $26-$65 million.

Risks Related to Regulatory, Legal, Our Common Stock and Other Matters

We are subject to litigation arising from alleged defects in our previous generation MCP and GPU products, which if determined adversely to us, could harm our business.

During fiscal years 2009 and 2010, we recorded net warranty charges against cost of revenue to cover anticipated customer warranty, repair, return, replacement and other costs arising from a weak die/packaging material set in certain versions of our previous generation MCP and GPU products used in notebook configurations. Although the number of units that we estimate will be impacted by this issue remains consistent with our initial estimates in July 2008, the overall cost of remediation and repair of impacted systems has been higher than originally anticipated. The weak die/packaging material combination is not used in any of our products that are currently in production.

The previous generation MCP and GPU products that are impacted were included in a number of notebook products that were shipped and sold in significant quantities. Certain notebook configurations of these MCP and GPU products are failing in the field at higher than normal rates. While we have not been able to determine with certainty a root cause for these failures, testing suggests a weak material set of die/package combination, system thermal management designs, and customer use patterns are contributing factors. We have worked with our customers to develop and have made available for download a software driver to cause the system fan to begin operation at the powering up of the system and reduce the thermal stress on these chips. We have also recommended to our customers that they consider changing the thermal management of the products in their notebook system designs. We intend to fully support our customers in their repair and replacement of these impacted products that fail, and their other efforts to mitigate the consequences of these failures.

We continue to seek access to our insurance coverage regarding reimbursement to us for some or all of the costs we have incurred and may incur in the future relating to the weak material set. However, there can be no assurance that we will recover any additional reimbursement. We continue to not see any abnormal failure rates in any systems using NVIDIA products other than certain notebook configurations. However, we are continuing to test and otherwise investigate other products. There can be no assurance that we will not discover defects in other products.

In September, October and November 2008, several putative class action lawsuits were filed against us, asserting various claims related to the impacted MCP and GPU products. Such lawsuits could result in the diversion of management’s time and attention away from business operations, which could harm our business. In addition, the costs of defense and any damages resulting from this litigation, a ruling against us, or a settlement of the litigation could adversely affect our cash flow and financial results.

We are a party to other litigation, including patent litigation, which, if determined adversely to us, could adversely affect our cash flow and financial results.

We are a party to other litigation as both a defendant and as a plaintiff. For example, we are engaged in litigation with Intel Corporation, Rambus Corporation and with various parties related to our acquisition of 3dfx in 2001. Please refer to Note 12 of the Notes to the Condensed Consolidated Financial Statements for further detail on these lawsuits. There can be no assurance that any litigation to which we are a party will be resolved in our favor. Any claim that is successfully decided against us may cause us to pay substantial damages, including punitive damages, and other related fees or prevent us from selling or importing certain of our products. Regardless of whether lawsuits are resolved in our favor or if we are the plaintiff or the defendant in the litigation, any lawsuits to which we are a party will likely be expensive and time consuming to defend or resolve. Such lawsuits could also harm our relationships with existing customers and result in the diversion of management’s time and attention away from business operations, which could harm our business. Costs of defense and any damages resulting from litigation, a ruling against us, or a settlement of the litigation could adversely affect our cash flow and financial results.

Changes in United States tax legislation regarding our foreign earnings could materially impact our business.

Currently, a majority of our revenue is generated from customers located outside the United States, and a significant portion of our assets, including employees, are located outside the United States. United States income taxes and foreign withholding taxes have not been provided on undistributed earnings for certain non-United States subsidiaries, because such earnings are intended to be indefinitely reinvested in the operations of those subsidiaries. President Obama’s administration has released various international tax proposals that if enacted into law would substantially reduce our ability to defer United States taxes on such indefinitely reinvestment non-United States earnings, eliminate or substantially reduce our ability to claim foreign tax credits, and/or eliminate certain tax deductions until foreign earnings are repatriated to the United States. If any of these or similar proposals are constituted into legislation in the current or future year(s), they could have a negative impact on our financial position and results of operations.

Litigation to defend against alleged infringement of intellectual property rights or to enforce our intellectual property rights and the outcome of such litigation could result in substantial costs to us.

We expect that as the number of issued hardware and software patents increases and as competition intensifies, the volume of intellectual property infringement claims and lawsuits may increase. We may in the future become involved in lawsuits or other legal proceedings alleging patent infringement or other intellectual property rights violations by us or by our customers that we have agreed to indemnify them for certain claims of infringement.

An unfavorable ruling in any such intellectual property related litigation could include significant damages, invalidation of a patent or family of patents, indemnification of customers, payment of lost profits, or, when it has been sought, injunctive relief.

In addition, in the future, we may need to commence litigation or other legal proceedings in order to:

  • assert claims of infringement of our intellectual property;
  • enforce our patents;
  • protect our trade secrets or know-how; or
  • determine the enforceability, scope and validity of the propriety rights of others.

If we have to initiate litigation in order to protect our intellectual property, our operating expenses may increase which could negatively impact our operating results. Our failure to effectively protect our intellectual property could harm our business.

If infringement claims are made against us or our products are found to infringe a third parties’ patent or intellectual property, we or one of our indemnified customers may have to seek a license to the third parties’ patent or other intellectual property rights. However, we may not be able to obtain licenses at all or on terms acceptable to us particularly from our competitors. If we or one of our indemnified customers is unable to obtain a license from a third party for technology that we use or that is used in one of our products, we could be subject to substantial liabilities or have to suspend or discontinue the manufacture and sale of one or more of our products. We may also have to make royalty or other payments, or cross license our technology. If these arrangements are not concluded on commercially reasonable terms, our business could be negatively impacted. Furthermore, the indemnification of a customer may increase our operating expenses which could negatively impact our operating results.

Our ability to compete will be harmed if we are unable to adequately protect our intellectual property.

We rely primarily on a combination of patents, trademarks, trade secrets, employee and third-party nondisclosure agreements, and licensing arrangements to protect our intellectual property in the United States and internationally. We have numerous patents issued, allowed and pending in the United States and in foreign jurisdictions. Our patents and pending patent applications primarily relate to our products and the technology used in connection with our products. We also rely on international treaties, organizations and foreign laws to protect our intellectual property. The laws of certain foreign countries in which our products are or may be manufactured or sold, including various countries in Asia, may not protect our products or intellectual property rights to the same extent as the laws of the United States. This makes the possibility of piracy of our technology and products more likely. We continuously assess whether and where to seek formal protection for particular innovations and technologies based on such factors as:

  • the commercial significance of our operations and our competitors’ operations in particular countries and regions;
  • the location in which our products are manufactured;
  • our strategic technology or product directions in different countries; and
  • the degree to which intellectual property laws exist and are meaningfully enforced in different jurisdictions.

Our pending patent applications and any future applications may not be approved. In addition, any issued patents may not provide us with competitive advantages or may be challenged by third parties. The enforcement of patents by others may harm our ability to conduct our business. Others may independently develop substantially equivalent intellectual property or otherwise gain access to our trade secrets or intellectual property. Our failure to effectively protect our intellectual property could harm our business.

Government investigations and inquiries from regulatory agencies could lead to enforcement actions, fines or other penalties and could result in litigation against us.

In the past, we have been subject to government investigations and inquiries from regulatory agencies such as the Department of Justice and the SEC. We may be subject to government investigations and receive additional inquiries from regulatory agencies in the future, which may lead to enforcement actions, fines or other penalties.

In addition, litigation has often been brought against a company in connection with the announcement of a government investigation or inquiry from a regulatory agency. Such lawsuits could result in the diversion of management’s time and attention away from business operations, which could harm our business. In addition, the costs of defense and any damages resulting from litigation, a ruling against us, or a settlement of the litigation could adversely affect our cash flow and financial results.

We are subject to the risks of owning real property.

During fiscal year 2009, we purchased real property in Santa Clara, California that includes approximately 25 acres of land and ten commercial buildings. We also own real property in China and India. We have limited experience in the ownership and management of real property and are subject to the risks of owning real property, including:

  • the possibility of environmental contamination and the costs associated with mitigating any environmental problems;
  • adverse changes in the value of these properties, due to interest rate changes, changes in the market in which the property is located, or other factors;
  • the risk of loss if we decide to sell and are not able to recover all capitalized costs;
  • increased cash commitments for the possible construction of a campus;
  • the possible need for structural improvements in order to comply with zoning, seismic and other legal or regulatory requirements;
  • increased operating expenses for the buildings or the property or both;
  • possible disputes with third parties, such as neighboring owners or others, related to the buildings or the property or both; and
  • the risk of financial loss in excess of amounts covered by insurance, or uninsured risks, such as the loss caused by damage to the buildings as a result of earthquakes, floods and or other natural disasters.

Expensing employee equity compensation adversely affects our operating results and could also adversely affect our competitive position.

Since inception, we have used equity through our equity incentive plans and our employee stock purchase program as a fundamental component of our compensation packages. We believe that these programs directly motivate our employees and, through the use of vesting, encourage our employees to remain with us.

We record compensation expense for stock options, restricted stock units and our employee stock purchase plan using the fair value of those awards in accordance with generally accepted accounting principles in United States of America, or U.S. GAAP. Stock-based compensation expense was $25.2 million and $34.1 million for the first quarters of fiscal years 2011 and 2010, respectively, related to on-going vesting of equity awards, which negatively impacted our operating results. Additionally, in March 2009, we completed a cash tender offer to purchase certain employee stock options. A total of 28.5 million options were tendered under the offer for an aggregate cash purchase price of $78.1 million, in exchange for the cancellation of the eligible options. As a result of the tender offer, we incurred a charge of $140.2 million consisting of the remaining unamortized stock based compensation expense associated with the unvested portion of the options tendered in the offer, stock-based compensation expense resulting from amounts paid in excess of the fair value of the underlying options, plus associated payroll taxes and professional fees. We believe that expensing employee equity compensation will continue to negatively impact our operating results.

To the extent that expensing employee equity compensation makes it more expensive to grant stock options and restricted stock units or to continue to have an employee stock purchase program, we may decide to incur increased cash compensation costs. In addition, actions that we may take to reduce stock-based compensation expense that may be more severe than any actions our competitors may implement and may make it difficult to attract retain and motivate employees, which could adversely affect our competitive position as well as our business and operating results.

We may be required to record a charge to earnings if our goodwill or amortizable intangible assets become impaired, which could negatively impact our operating results.

Under U.S. GAAP, we review our amortizable intangible assets and goodwill for impairment when events or changes in circumstances indicate the carrying value may not be recoverable. Goodwill is tested for impairment at least annually. The carrying value of our goodwill or amortizable assets from acquisitions may not be recoverable due to factors such as a decline in stock price and market capitalization, reduced estimates of future cash flows and slower growth rates in our industry or in any of our business units. Estimates of future cash flows are based on an updated long-term financial outlook of our operations. However, actual performance in the near-term or long-term could be materially different from these forecasts, which could impact future estimates. For example, if one of our business units does not meet its near-term and longer-term forecasts, the goodwill assigned to the business unit could be impaired. We may be required to record a charge to earnings in our financial statements during a period in which an impairment of our goodwill or amortizable intangible assets is determined to exist, which may negatively impact our results of operations.

Our stock price continues to be volatile and investors may suffer losses.

Our stock has at times experienced substantial price volatility as a result of variations between our actual and anticipated financial results, announcements by us and our competitors, or uncertainty about current global economic conditions. The stock market as a whole also has experienced extreme price and volume fluctuations that have affected the market price of many technology companies in ways that may have been unrelated to these companies’ operating performance.

In the past, securities class action litigation has often been brought against a company following periods of volatility in the market price of its securities. For example, following our announcement in July 2008 that we would take a charge against cost of revenue to cover anticipated costs and expenses arising from a weak die/packaging material set in certain versions of our previous generation MCP and GPU products and that we were revising financial guidance for our second fiscal quarter of 2009, the trading price of our common stock declined. In September, October and November 2008, several putative class action lawsuits were filed against us relating to this announcement. Please refer to Note 12 of the Notes to Condensed Consolidated Financial Statements for further information regarding these lawsuits. Due to changes in the potential volatility of our stock price, we may be the target of securities litigation in the future. Such lawsuits could result in the diversion of management’s time and attention away from business operations, which could harm our business. In addition, the costs of defense and any damages resulting from litigation, a ruling against us, or a settlement of the litigation could adversely affect our cash flow and financial results.

Our operating results may be adversely affected if we are subject to unexpected tax liabilities.

We are subject to taxation by a number of taxing authorities both in the United States and throughout the world. Tax rates vary among the jurisdictions in which we operate. Significant judgment is required in determining our provision for our income taxes as there are many transactions and calculations where the ultimate tax determination is uncertain. Although we believe our tax estimates are reasonable, any of the below could cause our effective tax rate to be materially different than that which is reflected in historical income tax provisions and accruals:

  • the jurisdictions in which profits are determined to be earned and taxed;
  • adjustments to estimated taxes upon finalization of various tax returns;
  • changes in available tax credits;
  • changes in share-based compensation expense;
  • changes in tax laws, the interpretation of tax laws either in the United States or abroad or the issuance of new interpretative accounting guidance related to uncertain transactions and calculations where the tax treatment was previously uncertain; and
  • the resolution of issues arising from tax audits with various tax authorities.

Should additional taxes be assessed as a result of any of the above, our operating results could be adversely affected. In addition, our future effective tax rate could be adversely affected by changes in the mix of earnings in countries with differing statutory tax rates, changes in tax laws or changes in the interpretation of tax laws.

Our failure to comply with any applicable environmental regulations could result in a range of consequences, including fines, suspension of production, excess inventory, sales limitations, and criminal and civil liabilities.

We are subject to various state, federal and international laws and regulations governing the environment, including restricting the presence of certain substances in electronic products and making producers of those products financially responsible for the collection, treatment, recycling and disposal of those products. For example, we are subject to the European Union Directive on Restriction of Hazardous Substances Directive, or RoHS Directive, that restricts the use of a number of substances, including lead, and other hazardous substances in electrical and electronic equipment in the market in the European Union. We could face significant costs and liabilities in connection with the European Union Directive on Waste Electrical and Electronic Equipment, or WEEE. The WEEE directs members of the European Union to enact laws, regulations, and administrative provisions to ensure that producers of electric and electronic equipment are financially responsible for the collection, recycling, treatment and environmentally responsible disposal of certain products sold into the market after August 15, 2005.

It is possible that unanticipated supply shortages, delays or excess non-compliant inventory may occur as a result of the RoHS Directive, WEEE, and other domestic or international environmental regulations. Failure to comply with any applicable environmental regulations could result in a range of consequences including costs, fines, suspension of production, excess inventory, sales limitations, criminal and civil liabilities and could impact our ability to conduct business in the countries or states that have adopted these types of regulations.

While we believe that we have adequate internal control over financial reporting, if we or our independent registered public accounting firm determines that we do not, our reputation may be adversely affected and our stock price may decline.

Section 404 of the Sarbanes-Oxley Act of 2002 requires our management to report on, and our independent registered public accounting firm to audit, the effectiveness of our internal control structure and procedures for financial reporting. We have an ongoing program to perform the system and process evaluation and testing necessary to comply with these requirements. However, the manner in which companies and their independent public accounting firms apply these requirements and test companies’ internal controls remains subject to some judgment. To date, we have incurred, and we expect to continue to incur, increased expense and to devote additional management resources to Section 404 compliance. Despite our efforts, if we identify a material weakness in our internal controls, there can be no assurance that we will be able to remediate that material weakness in a timely manner, or that we will be able to maintain all of the controls necessary to determine that our internal control over financial reporting is effective. In the event that our chief executive officer, chief financial officer or our independent registered public accounting firm determine that our internal control over financial reporting is not effective as defined under Section 404, investor perceptions of us may be adversely affected and could cause a decline in the market price of our stock.

Changes in financial accounting standards or interpretations of existing standards could affect our reported results of operations.

We prepare our consolidated financial statements in conformity with U.S.GAAP. These principles are constantly subject to review and interpretation by the SEC and various bodies formed to interpret and create appropriate accounting principles. A change in these principles can have a significant effect on our reported results and may even retroactively affect previously reported transactions.

Provisions in our certificate of incorporation, our bylaws and our agreement with Microsoft could delay or prevent a change in control.

Our certificate of incorporation and bylaws contain provisions that could make it more difficult for a third party to acquire a majority of our outstanding voting stock. These provisions include the following:

  • the ability of our Board to create and issue preferred stock without prior stockholder approval;
  • the prohibition of stockholder action by written consent;
  • a classified Board; and
  • advance notice requirements for director nominations and stockholder proposals.

On March 5, 2000, we entered into an agreement with Microsoft in which we agreed to develop and sell graphics chips and to license certain technology to Microsoft and its licensees for use in the Xbox. Under the agreement, if an individual or corporation makes an offer to purchase shares equal to or greater than 30% of the outstanding shares of our common stock, Microsoft may have first and last rights of refusal to purchase the stock. The Microsoft provision and the other factors listed above could also delay or prevent a change in control of NVIDIA.

Figures reported in this filing

Standardized line items from the XBRL in this filing, for the period ended 2010-05-02. Comparative periods it repeats are left out.

Figures reported in this filing
Line itemPeriodValueXBRL concept
Revenue3 months2010-02-01 to 2010-05-02$1.00bnus-gaap:Revenues
Cost of revenue3 months2010-02-01 to 2010-05-02$545.4mus-gaap:CostOfRevenue
Gross profit3 months2010-02-01 to 2010-05-02$456.4mus-gaap:GrossProfit
Research and development3 months2010-02-01 to 2010-05-02$218.1mus-gaap:ResearchAndDevelopmentExpense
Selling, general and administrative3 months2010-02-01 to 2010-05-02$90.9mus-gaap:SellingGeneralAndAdministrativeExpense
Operating income3 months2010-02-01 to 2010-05-02$147.4mus-gaap:OperatingIncomeLoss
Income tax3 months2010-02-01 to 2010-05-02$13.1mus-gaap:IncomeTaxExpenseBenefit
Net income3 months2010-02-01 to 2010-05-02$137.6mus-gaap:NetIncomeLoss
Diluted EPS3 months2010-02-01 to 2010-05-02$0.23us-gaap:EarningsPerShareDiluted
Basic EPS3 months2010-02-01 to 2010-05-02$0.24us-gaap:EarningsPerShareBasic
Diluted shares (weighted)3 months2010-02-01 to 2010-05-02590,997 sharesus-gaap:WeightedAverageNumberOfDilutedSharesOutstanding
Operating cash flow3 months2010-02-01 to 2010-05-02−$5.4mus-gaap:NetCashProvidedByUsedInOperatingActivities
Cash and equivalentsAt period end2010-05-02$447.3mus-gaap:CashAndCashEquivalentsAtCarryingValue
Current assetsAt period end2010-05-02$2.73bnus-gaap:AssetsCurrent
Total assetsAt period end2010-05-02$3.80bnus-gaap:Assets
Current liabilitiesAt period end2010-05-02$765.3mus-gaap:LiabilitiesCurrent
Shareholders' equityAt period end2010-05-02$2.86bnus-gaap:StockholdersEquity

Source: SEC EDGAR, the filing index for accession 0001045810-10-000018. Last ingested by Listed: Nov 12, 2026, 19:06 ET. Listed shows no prices and gives no investment advice.