Listed

Dauch Corp: Form 10-Q for the period ended Mar 31, 2019

Filed with the SEC on May 3, 2019 and accepted by EDGAR at May 3, 2019, 13:56 ET.

Share

Management's discussion and analysis

As filed, 29,422 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

This management’s discussion and analysis (MD&A) should be read in conjunction with the unaudited condensed consolidated financial statements and notes appearing elsewhere in this Quarterly Report and our Annual Report on Form 10-K for the year ended December 31, 2018.

Unless the context otherwise requires, references to "we," "our," "us" or "AAM" shall mean collectively (i) American Axle & Manufacturing Holdings, Inc. (Holdings), a Delaware corporation, (ii) American Axle & Manufacturing, Inc. (AAM, Inc.), a Delaware corporation, and its direct and indirect subsidiaries, and, (iii) Metaldyne Performance Group, Inc. (MPG) and its direct and indirect subsidiaries. AAM Inc. and MPG are wholly-owned subsidiaries of Holdings.

COMPANY OVERVIEW

We are a global Tier 1 supplier to the automotive industry. We design, engineer and manufacture driveline, metal forming and casting products that are making the next generation of vehicles smarter, lighter, safer and more efficient. We employ over 25,000 associates, operating at nearly 90 facilities in 17 countries, to support our customers on global and regional platforms with a focus on quality, operational excellence and technology leadership.

We are a primary supplier of driveline components to General Motors Company (GM) for its full-size rear-wheel drive (RWD) light trucks and SUVs manufactured in North America, supplying a significant portion of GM’s rear axle and four-wheel drive and all-wheel drive (4WD/AWD) axle requirements for these vehicle platforms. We also supply GM with various products from our Metal Forming and Casting segments. Sales to GM were approximately 39% of our consolidated net sales in the first three months of 2019, 42% of our consolidated net sales in the first three months of 2018 and 41% of our consolidated net sales for the full year of 2018.

We also supply driveline system products to FCA US LLC (FCA) for heavy-duty Ram full-size pickup trucks and its derivatives, the AWD Jeep Cherokee, and a passenger car driveshaft program. In addition, we sell various products to FCA from our Metal Forming and Casting segments. Sales to FCA were approximately 12% of our consolidated net sales in the first three months of 2019, and 13% of our consolidated net sales in the first three months of 2018 and for the full year 2018.

In 2019, we initiated a new global restructuring program (the 2019 Program) to further streamline our business by consolidating our four existing segments into three segments. This activity occurred through the disaggregation of our former Powertrain segment, with a portion moving into our Driveline segment and a portion moving into our Metal Forming segment. The primary objectives of this consolidation are to finalize the integration of MPG, align AAM's product and process technologies, and to achieve efficiencies within our corporate and business unit support teams to reduce cost in our business. Throughout this MD&A, amounts previously reported for the Powertrain segment have been reclassified to the Driveline and Metal Forming segments accordingly.

RESULTS OF OPERATIONS –– THREE MONTHS ENDED MARCH 31, 2019 AS COMPARED TO THREE MONTHS ENDED MARCH 31, 2018

Net Sales Net sales were $1,719.2 million in the first quarter of 2019 as compared to $1,858.4 million in the first quarter of 2018. Our change in sales in the first quarter of 2019, as compared to the first quarter of 2018, primarily reflects the impact of lower full-size truck sales resulting from the in-sourcing by our largest customer of a portion of a replacement program that launched in the second half of 2018, as well as the impact of customer downtime as a result of program changeovers in the first quarter of 2019. Net sales in the first quarter of 2019, as compared to the first quarter of 2018, were also negatively impacted by approximately $12 million associated with the net effect of metal market pass-throughs to our customers and the impact of foreign exchange related to translation adjustments.

Cost of Goods Sold Cost of goods sold was $1,497.0 million in the first quarter of 2019, as compared to $1,542.1 million in the first quarter of 2018. The change in cost of goods sold principally reflects the impact of lower production volumes, partially offset by increased material and freight costs totaling approximately $10 million, and an increase in depreciation expense of approximately $13 million as a result of significant program launch activity in 2018.

For the three months ended March 31, 2019, material costs were approximately 57% of total costs of goods sold, as compared to approximately 59% for the three months ended March 31, 2018.

Gross Profit Gross profit was $222.2 million in the first quarter of 2019 as compared to $316.3 million in the first quarter of 2018. Gross margin was 12.9% in the first quarter of 2019 as compared to 17.0% in the first quarter of 2018. Gross profit and gross margin were impacted by the factors discussed in Net Sales and Cost of Goods Sold above.

Selling, General and Administrative Expenses (SG&A) SG&A (including research and development (R&D)) was $90.7 million or 5.3% of net sales in the first quarter of 2019 as compared to $97.3 million or 5.2% of net sales in the first quarter of 2018. R&D spending was approximately $34.3 million in the first quarter of 2019 as compared to $38.5 million in the first quarter of 2018. The change in SG&A in the first quarter of 2019, as compared to the first quarter of 2018, primarily reflects the impact of lower R&D spending.

Amortization of Intangible Assets Amortization expense related to intangible assets was $25.0 million and $24.9 million for the three months ended March 31, 2019 and March 31, 2018, respectively.

Restructuring and Acquisition-Related Costs Restructuring and acquisition-related costs were $12.1 million in the first quarter of 2019, as compared to $18.3 million in the first quarter of 2018. As part of our restructuring actions, we incurred severance charges of approximately $4.1 million, as well as implementation costs of approximately $4.3 million during the three months ended March 31, 2019. This compares to severance charges of $0.2 million and implementation charges of $3.9 million for the three months ended March 31, 2018. We expect to incur approximately $25 million to $35 million of total restructuring charges in 2019, including costs incurred under the 2019 Program.

During the three months ended March 31, 2019, we incurred $3.7 million of integration expenses primarily associated with the integration of MPG. This compares to $1.1 million of acquisition-related costs and $13.1 million of integration expenses during the three months ended March 31, 2018. We expect to incur total integration charges of $15 million to $25 million in 2019 as we further the integration of MPG.

Acquisition-related costs primarily consist of advisory, legal, accounting, valuation and certain other professional or consulting fees incurred. Integration expenses reflect costs incurred for information technology systems, ongoing operational activities, and consulting fees incurred in conjunction with the acquisitions.

Operating Income Operating income was $94.4 million in the first quarter of 2019, as compared to $175.8 million in the first quarter of 2018. Operating margin was 5.5% in the first quarter of 2019, as compared to 9.5% in the first quarter of 2018. The changes in operating income and operating margin were due to factors discussed in Net Sales, Cost of Goods Sold, SG&A and Restructuring and Acquisition-Related Costs above.

Interest Expense and Investment Income Interest expense was $53.4 million in the first quarter of 2019, as compared to $53.2 million in the first quarter of 2018. Investment income was $0.7 million in the first quarter of 2019, as compared to $0.5 million in the first quarter of 2018.

The weighted-average interest rate of our long-term debt outstanding was 5.9% in the first quarter of 2019 and 5.8% in the first quarter of 2018. We expect our interest expense for the full year 2019 to be approximately $215 million to $225 million.

Debt Refinancing and Redemption Costs In March 2018, we made a tender offer for our 6.25% Notes due 2021. Under this tender offer, we retired $383.1 million of the 6.25% Notes due 2021. We expensed $2.5 million during the first quarter of 2018 for the write-off of the remaining unamortized debt issuance costs that we had been amortizing over the expected life of the borrowing and expensed $7.8 million in tender premiums. There were no such costs incurred in the first quarter of 2019.

Other Expense, Net Other expense, net includes the net effect of foreign exchange gains and losses, our proportionate share of earnings from equity in unconsolidated subsidiaries, and all components of net periodic pension and postretirement benefit costs other than service cost. Other expense, net was $3.0 million in the first quarter of 2019, as compared to $5.4 million in the first quarter of 2018.

Income Tax Expense (Benefit) Income tax was a benefit of $3.0 million for the three months ended March 31, 2019, as compared to expense of $17.9 million for the three months ended March 31, 2018. Our effective income tax rate was (7.8)% in the first quarter of 2019, as compared to 16.7% in the first quarter of 2018. As part of the Tax Cuts and Jobs Act in 2017, a one-time transition tax (Transition Tax) was imposed on certain foreign earnings for which U.S. income tax was previously deferred. The Department of Treasury and Internal Revenue Service issued final regulations on February 5, 2019 regarding the Transition Tax, which changed the manner in which we are required to compute the Transition Tax when it is recognized over a two-year period. The application of the final regulations resulted in a $9.3 million income tax benefit, which has been recorded in the first quarter of 2019, the period in which the final regulations were issued.

Our effective income tax rate for the three months ended March 31, 2019 is lower than our effective income tax rate for the three months ended March 31, 2018 as a result of the discrete item described above. For the three months ended March 31, 2019 and 2018, our effective income tax rates vary from the U.S. federal statutory rate of 21% primarily due to favorable foreign tax rates, as well as the impact of tax credits and the effect of the discrete item described above.

Net Income Attributable to AAM and Earnings Per Share (EPS) Net income attributable to AAM was $41.6 million in the first quarter of 2019, as compared to $89.4 million in the first quarter of 2018. Diluted EPS was $0.36 per share in the first quarter of 2019, as compared to $0.78 per share in the first quarter of 2018.

Net income attributable to AAM and EPS for the first quarters of 2019 and 2018 were primarily impacted by the factors discussed above.

SEGMENT REPORTING

In the first quarter of 2019, we reorganized our business to disaggregate our former Powertrain segment, with a portion moving to our Driveline segment and a portion moving to our Metal Forming segment. As a result, our business is now organized into Driveline, Metal Forming and Casting segments, with each representing a reportable segment under ASC 280 Segment Reporting. The Powertrain amounts previously reported for the three months ended March 31, 2018 have been reclassified to Driveline and Metal Forming.

The results of each segment are regularly reviewed by the chief operating decision maker to assess the performance of the segment and make decisions regarding the allocation of resources to the segments.

Our product offerings by segment are as follows:

  • Driveline products consist primarily of front and rear axles, driveshafts, differential assemblies, clutch modules, balance shaft systems, disconnecting driveline technology, and electric and hybrid driveline products and systems for light trucks, SUVs, crossover vehicles, passenger cars and commercial vehicles;
  • Metal Forming products consist primarily of axle and transmission shafts, ring and pinion gears, differential gears and assemblies, connecting rods and variable valve timing products for Original Equipment Manufacturers and Tier 1 automotive suppliers; and
  • The Casting segment produces both thin wall castings and high strength ductile iron castings, as well as transmission pump bodies, steering knuckles, control arms, brake anchors and calipers, and ball joint housings for the global light vehicle, commercial and industrial markets.

The following table represents sales by reportable segment for the three months ended March 31, 2019 and 2018 (in millions):

Three Months Ended March 31, 2019 2018
Driveline $1,134.7 $1,216.1
Metal Forming 483.3 542.3
Casting 225.3 239.0
Eliminations (124.1) (139.0)
Net Sales $1,719.2 $1,858.4

The change in Driveline sales for the three months ended March 31, 2019, as compared to the three months ended March 31, 2018, primarily reflect the impact of lower full-size truck sales resulting from the in-sourcing by our largest customer of a portion of a replacement program that launched in the second half of 2018, as well as the impact of customer downtime as a result of program changeovers in the first quarter of 2019. Driveline sales in the first quarter of 2019, as compared to the first quarter of 2018, were also negatively impacted by approximately $20 million associated with the effect of metal market pass-throughs to our customers and the impact of foreign exchange related to translation adjustments.

The change in net sales in our Metal Forming segment in the three months ended March 31, 2019, as compared to the three months ended March 31, 2018, reflects lower global automotive production volumes, as well as a reduction in intersegment sales to our Driveline segment due to the factors discussed for Driveline above.

The change in net sales in our Casting segment in the three months ended March 31, 2019, as compared to the three months ended March 31, 2018, reflects lower production volumes, partially offset by an increase of approximately $8 million related to metal market pass-throughs and price increases to customers.

We use Segment Adjusted EBITDA as the measure of earnings to assess the performance of each segment and determine the resources to be allocated to the segments. We define EBITDA to be earnings before interest expense, income taxes, depreciation and amortization. Segment Adjusted EBITDA is defined as EBITDA for our reportable segments excluding the impact of restructuring and acquisition-related costs, debt refinancing and redemption costs, gain on the sale of a business, goodwill impairments and non-recurring items.

The amounts for Segment Adjusted EBITDA for the three months ended March 31, 2019 and 2018 are as follows (in millions):

Three Months Ended March 31, 2019 2018
Driveline $137.2 $189.7
Metal Forming 85.3 105.7
Casting 22.5 21.6
Total Segment adjusted EBITDA $245.0 $317.0

For the three months ended March 31, 2019, as compared to the three months ended March 31, 2018, the change in Segment Adjusted EBITDA for the Driveline segment was primarily attributable to lower production volumes and a change in product mix due to customer downtime as a result of program changeovers in the first quarter of 2019, as well as costs associated with global launch activity. Segment Adjusted EBITDA for the Driveline segment was also impacted by an increase of approximately $11 million in material and freight costs.

The change in Metal Forming Segment Adjusted EBITDA for the three months ended March 31, 2019, as compared to the three months ended March 31, 2018, was primarily attributable to lower production volumes.

Casting experienced an increase in Segment Adjusted EBITDA for the three months ended March 31, 2019, as compared to the three months ended March 31, 2018, primarily attributable to lower material and freight costs and the impact of price increases to customers, partially offset by increased labor costs in an effort to address workforce shortages at certain locations.

Reconciliation of Non-GAAP and GAAP Information

In addition to results reported in accordance with accounting principles generally accepted in the United States of America (GAAP) in this MD&A, we have provided certain non-GAAP financial measures such as EBITDA and Total Segment Adjusted EBITDA. Such information is reconciled to its closest GAAP measure in accordance with Securities and Exchange Commission rules below.

We define EBITDA to be earnings before interest expense, income taxes, depreciation and amortization. Total Segment Adjusted EBITDA is defined as EBITDA for our reportable segments excluding the impact of restructuring and acquisition-related costs, debt refinancing and redemption costs, gain on the sale of a business, goodwill impairments and non-recurring items. We believe that EBITDA and Total Segment Adjusted EBITDA are meaningful measures of performance as they are commonly utilized by management and investors to analyze operating performance and entity valuation. Our management, the investment community and the banking institutions routinely use EBITDA and Total Segment Adjusted EBITDA, together with other measures, to measure our operating performance relative to other Tier 1 automotive suppliers and to assess the relative mix of Adjusted EBITDA by segment. We also believe that Total Segment Adjusted EBITDA is a meaningful measure as it is used for operational planning and decision-making purposes. These non-GAAP financial measures are not and should not be considered a substitute for any GAAP measure. Additionally, non-GAAP financial measures as presented by AAM may not be comparable to similarly titled measures reported by other companies.

Three Months Ended March 31, 2019 2018
Net income $41.7 $89.5
Interest expense 53.4 53.2
Income tax expense (benefit) (3.0) 17.9
Depreciation and amortization 140.8 127.8
EBITDA $232.9 $288.4
Restructuring and acquisition-related costs 12.1 18.3
Debt refinancing and redemption costs — 10.3
Total Segment Adjusted EBITDA $245.0 $317.0

38

LIQUIDITY AND CAPITAL RESOURCES

Our primary liquidity needs are to fund debt service obligations, capital expenditures and working capital requirements, in addition to advancing our strategic initiatives. We believe that operating cash flow, available cash and cash equivalent balances and available borrowing capacity under our credit facilities will be sufficient to meet these needs.

Operating Activities In the first three months of 2019, net cash used in operating activities was $80.2 million as compared to net cash provided by operating activities of $66.9 million in the first three months of 2018. The following factors impacted cash from operating activities in the first three months of 2019 as compared to the first three months of 2018:

Net income Net income was $41.7 million in the first three months of 2019 as compared to $89.5 million in the first three months of 2018. The change in net income in the first three months of 2019, as compared to the first three months of 2018, was the result of the factors discussed in the Results of Operations - Three Months Ended March 31, 2019 as Compared to Three Months Ended March 31, 2018 section of this MD&A.

Accounts receivable For the three months ended March 31, 2019, we experienced a decrease in cash flow from operating activities of approximately $44 million related to the change in our accounts receivable balance from December 31, 2018 to March 31, 2019, as compared to the change in our accounts receivable balance from December 31, 2017 to March 31, 2018. This change was attributable to the timing of payments received from customers.

Interest paid Interest paid in the first quarter of 2019 was $32.4 million, as compared to $27.2 million in the first quarter of 2018.

Restructuring and acquisition-related costs For the full year 2019, we expect restructuring and acquisition-related payments to be between $50 million and $60 million, and we expect the timing of cash payments to approximate the timing of charges incurred.

Pension and other postretirement benefits Due to the availability of our pre-funded pension balances (previous contributions in excess of prior required pension contributions) related to certain of our U.S. pension plans, we expect our regulatory pension funding requirements in 2019 to be approximately $2.2 million. We expect our cash payments for other postretirement benefit obligations in 2019, net of GM cost sharing, to be approximately $17.7 million.

Investing Activities In the first three months of 2019, net cash used in investing activities was $123.9 million as compared to $132.2 million for the three months ended March 31, 2018. Capital expenditures were $124.2 million in the first three months of 2019 as compared to $130.8 million in the first three months of 2018. We expect our capital spending in 2019 to be approximately 7% of sales, which includes support for our global program launches in 2019 and 2020 within our new and incremental business backlog, as well as program capacity increases and future launches of replacement programs.

In 2019, we expect to make payments of approximately $10 million as part of our investment in the Liuzhou Wuling joint venture that was formed in 2018.

Financing Activities In the first three months of 2019, net cash used in financing activities was $21.4 million, as compared to net cash provided by financing activities of $23.3 million in the first three months of 2018. The following factors impacted cash from financing activities in the first three months of 2019 as compared to the first three months of 2018:

Senior Secured Credit Facilities In 2017, Holdings and American Axle & Manufacturing, Inc. (AAM, Inc.) entered into a credit agreement (the Credit Agreement). In connection with the Credit Agreement, Holdings, AAM, Inc. and certain of their restricted subsidiaries entered into a Collateral Agreement and Guarantee Agreement with the financial institutions party thereto as collateral agent and administrative agent. The Credit Agreement includes a $100.0 million term loan A facility (the Term Loan A Facility), a $1.55 billion term loan B facility (the Term Loan B Facility) and a $932 million multi-currency revolving credit facility (the Revolving Credit Facility, and together with the Term Loan A Facility and the Term Loan B Facility, the Senior Secured Credit Facilities). The proceeds of the Revolving Credit Facility are used for general corporate purposes.

As of March 31, 2019 we have prepaid $10.0 million of the outstanding principal on our Term Loan A Facility and $15.5 million of the outstanding principal on our Term Loan B Facility. These payments satisfy our obligation for principal payments under the Term Loan A Facility and Term Loan B Facility through the first quarter of 2020. As such, there are no amounts related to the Term Loan A Facility and Term Loan B Facility presented in the Current portion of long-term debt line item in our Condensed Consolidated Balance Sheet as of March 31, 2019.

At March 31, 2019, we had $893.8 million available under the Revolving Credit Facility. This availability reflects a reduction of $38.2 million for standby letters of credit issued against the facility.

The Senior Secured Credit Facilities provide back-up liquidity for our foreign credit facilities. We intend to use the availability of long-term financing under the Senior Secured Credit Facilities to refinance any current maturities related to such debt agreements that are not otherwise refinanced on a long-term basis in their local markets, except where otherwise reclassified to Current portion of long-term debt on our Condensed Consolidated Balance Sheet.

Redemption of 7.75% Notes due 2019 In April 2019, we issued an irrevocable notice to the holders of our 7.75% Notes due 2019 to voluntarily redeem our 7.75% Notes due 2019 in the second quarter of 2019. This will result in a principal payment of $100 million and $0.3 million in accrued interest. We will also expense approximately $0.1 million for the write-off of the unamortized debt issuance costs that we had been amortizing over the expected life of the borrowing, and approximately $2.2 million for an early redemption premium.

6.25% Notes due 2026 In March 2018, we issued $400.0 million in aggregate principal amount of 6.25% senior notes due 2026 (the 6.25% Notes due 2026). Proceeds from the 6.25% Notes due 2026 were used primarily to fund the tender offer for the 6.25% senior notes due 2021 (the 6.25% Notes due 2021) described below. We paid debt issuance costs of $6.6 million in the first three months of 2018 related to the 6.25% Notes due 2026.

Tender Offer of 6.25% Notes due 2021 Also in March 2018, we made a tender offer for our 6.25% Notes due 2021. Under this tender offer, we retired $383.1 million of the 6.25% Notes due 2021 in the first quarter of 2018. During the three months ended March 31, 2018, we expensed $2.5 million for the write-off of the remaining unamortized debt issuance costs that we had been amortizing over the expected life of the borrowing and $7.8 million in tender premiums.

Foreign credit facilities We utilize local currency credit facilities to finance the operations of certain foreign subsidiaries. At March 31, 2019, $123.0 million was outstanding under our foreign credit facilities as compared to $127.1 million at December 31, 2018. At March 31, 2019, an additional $85.5 million was available under our foreign credit facilities.

Treasury stock Treasury stock increased by $7.3 million in the first three months of 2019 to $209.1 million as compared to $201.8 million at year-end 2018, due to the withholding and repurchase of shares of AAM stock to satisfy employee tax withholding obligations due upon the vesting of performance shares and restricted stock units.

CRITICAL ACCOUNTING ESTIMATES

Subsequent to the disaggregation of our Powertrain reporting unit into the Driveline and Metal Forming reporting units, the fair value of our Metal Forming reporting unit exceeded its carrying value by approximately 11%. Fair value of the reporting unit is estimated based on a combination of discounted cash flows and the use of pricing multiples derived from an analysis of comparable public companies multiplied against historical and/or anticipated financial metrics of the reporting unit. These calculations contain uncertainties as they require management to make assumptions including, but not limited to, market comparables, future cash flows of the reporting unit, and appropriate discount and long-term growth rates.

A decline in the actual cash flows of Metal Forming in future periods, as compared to the projected cash flows used in the valuation, could result in the carrying value of the reporting unit exceeding its fair value. Further, a change in the discount rate or long-term growth rate as a result of a change in economic conditions could result in the carrying value of the reporting unit exceeding its fair value.

AAM's critical accounting estimates are included in our Annual Report on Form 10-K for the year ended December 31, 2018 and did not materially change during the three months ended March 31, 2019.

CYCLICALITY AND SEASONALITY

Our operations are cyclical because they are directly related to worldwide automotive production, which is itself cyclical and dependent on general economic conditions and other factors. Our business is also moderately seasonal as our major OEM customers historically have an extended shutdown of operations (typically 1-2 weeks) in conjunction with their model year changeover and an approximate one-week shutdown in December. Our major OEM customers also occasionally have longer shutdowns of operations (up to six weeks) for program changeovers. Accordingly, our quarterly results may reflect these trends.

LITIGATION AND ENVIRONMENTAL MATTERS

We are involved in various legal proceedings incidental to our business. Although the outcome of these matters cannot be predicted with certainty, we do not believe that any of these matters, individually or in the aggregate, will have a material adverse effect on our financial condition, results of operations or cash flows.

We are subject to various federal, state, local and foreign environmental and occupational safety and health laws, regulations and ordinances, including those regulating air emissions, water discharge, waste management and environmental cleanup. We closely monitor our environmental conditions to ensure that we are in compliance with applicable laws, regulations and ordinances. We have made, and anticipate continuing to make, capital and other expenditures, including recurring administrative costs, to comply with environmental requirements. Such expenditures were not significant in the first quarter of 2019.

Market risk

As filed, 2,459 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

MARKET RISK

Our business and financial results are affected by fluctuations in world financial markets, including currency exchange rates and interest rates. Our hedging policy has been developed to manage these risks to an acceptable level based on management’s judgment of the appropriate trade-off between risk, opportunity and cost. We do not hold financial instruments for trading or speculative purposes.

Currency Exchange Risk From time to time, we use foreign currency forward contracts to reduce the effects of fluctuations in exchange rates relating to certain foreign currencies. At March 31, 2019, we had currency forward contracts with a notional amount of $203.1 million outstanding. The potential decrease in fair value of foreign exchange contracts, assuming a 10% adverse change in the foreign currency exchange rates, would be approximately $18.7 million at March 31, 2019 and was approximately $17.1 million at December 31, 2018.

Future business operations and opportunities, including the expansion of our business outside North America, may further increase the risk that cash flows resulting from these global operations may be adversely affected by changes in currency exchange rates. If and when appropriate, we intend to manage these risks by creating natural hedges in the structure of our global operations, utilizing local currency funding of these expansions and various types of foreign exchange contracts.

Interest Rate Risk We are exposed to variable interest rates on certain credit facilities. From time to time, we have used interest rate hedging to reduce the effects of fluctuations in market interest rates. In 2018, we entered into a variable-to-fixed interest rate swap to reduce the variability of cash flows associated with interest payments on our variable rate debt. As of March 31, 2019, we have the following notional amounts hedged in relation to our variable-to-fixed interest rate swap: $900.0 million through May 2019, $750.0 million through May 2020, $500.0 million through May 2021, $400.0 million through May 2022 and $400.0 million through May 2023.

The pre-tax earnings and cash flow impact of a one-percentage-point increase in interest rates (approximately 17% of our weighted-average interest rate at March 31, 2019) on our long-term debt outstanding, would be approximately $8.1 million at March 31, 2019 and was approximately $8.2 million at December 31, 2018, on an annualized basis.

Controls and procedures

As filed, 1,833 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Disclosure Controls and Procedures

Under the direction of our Chief Executive Officer and Chief Financial Officer, we evaluated our disclosure controls and procedures and internal control over financial reporting and concluded that our disclosure controls and procedures (as defined in Rules 13a-15(e) or 15d-15(e) under the Securities Exchange Act of 1934 (the “Exchange Act”)) were effective as of March 31, 2019.

Changes in Internal Control over Financial Reporting

On January 1, 2019, we began the implementation of our global enterprise resource planning (ERP) systems at certain of the locations that were acquired as part of the MPG acquisition. As part of these implementations, we have modified the design and documentation of our internal controls processes and procedures, where appropriate. We will continue to implement these ERP systems at certain locations throughout the remainder of 2019 and early 2020.

Also on January 1, 2019, we adopted new accounting guidance under Accounting Standards Codification Topic 842 (ASC 842) Leases. As part of the adoption of ASC 842, we implemented changes to our internal controls including the implementation of a new software system for lease accounting and reporting. Other changes to internal controls related to ASC 842 include updating our company policy associated with leases, determining the term of lease agreements, including whether options to extend or terminate a lease are reasonably certain to be exercised, and establishing the appropriate discount rates to calculate our lease liabilities.

Except as described above, there were no changes in our internal control over financial reporting during the quarter ended March 31, 2019 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

Figures reported in this filing

Standardized line items from the XBRL in this filing, for the period ended 2019-03-31. Comparative periods it repeats are left out.

Figures reported in this filing
Line itemPeriodValueXBRL concept
Cost of revenue3 months2019-01-01 to 2019-03-31$1.50bnus-gaap:CostOfGoodsAndServicesSold
Gross profit3 months2019-01-01 to 2019-03-31$222.2mus-gaap:GrossProfit
Selling, general and administrative3 months2019-01-01 to 2019-03-31$90.7mus-gaap:SellingGeneralAndAdministrativeExpense
Operating income3 months2019-01-01 to 2019-03-31$94.4mus-gaap:OperatingIncomeLoss
Interest expense3 months2019-01-01 to 2019-03-31$53.4mus-gaap:InterestExpense
Income tax3 months2019-01-01 to 2019-03-31−$3.0mus-gaap:IncomeTaxExpenseBenefit
Net income3 months2019-01-01 to 2019-03-31$41.6mus-gaap:NetIncomeLoss
Diluted EPS3 months2019-01-01 to 2019-03-31$0.36us-gaap:EarningsPerShareDiluted
Basic EPS3 months2019-01-01 to 2019-03-31$0.36us-gaap:EarningsPerShareBasic
Diluted shares (weighted)3 months2019-01-01 to 2019-03-31112,400,000 sharesus-gaap:WeightedAverageNumberOfDilutedSharesOutstanding
Operating cash flow3 months2019-01-01 to 2019-03-31−$80.2mus-gaap:NetCashProvidedByUsedInOperatingActivities
Capital expenditure3 months2019-01-01 to 2019-03-31$124.2mus-gaap:PaymentsToAcquirePropertyPlantAndEquipment
Share repurchases3 months2019-01-01 to 2019-03-31$7.3mus-gaap:PaymentsForRepurchaseOfCommonStock
Cash and equivalentsAt period end2019-03-31$252.1mus-gaap:CashAndCashEquivalentsAtCarryingValue
Current assetsAt period end2019-03-31$2.04bnus-gaap:AssetsCurrent
Total assetsAt period end2019-03-31$7.62bnus-gaap:Assets
Current liabilitiesAt period end2019-03-31$1.39bnus-gaap:LiabilitiesCurrent
Total liabilitiesAt period end2019-03-31$6.09bnus-gaap:Liabilities
Current portion of debtAt period end2019-03-31$118.6mus-gaap:LongTermDebtCurrent
Shareholders' equityAt period end2019-03-31$1.52bnus-gaap:StockholdersEquity

Source: SEC EDGAR, the filing index for accession 0001062231-19-000036. Last ingested by Listed: Nov 6, 2026, 13:29 ET. Listed shows no prices and gives no investment advice.