Listed

Nlight, Inc.: Form 10-Q for the period ended Jun 30, 2026

Filed with the SEC on Aug 7, 2026 and accepted by EDGAR at Aug 7, 2026, 12:04 ET.

Share

Management's discussion and analysis

As filed, 30,082 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

This Quarterly Report on Form 10-Q contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended. In some cases, you can identify forward-looking statements by the following words: "ability," "anticipate," "attempt," "believe," "can be," "continue," "could," "depend," "enable," "estimate," "expect," "extend," "grow," "if," "intend," "likely," "may," "objective," "ongoing," "plan," "possible," "potential," "predict," "project," "propose," "rely," "should," "target," "will," "would" or the negative of these terms or other comparable terminology, although not all forward-looking statements contain these words.

These statements involve risks, uncertainties and other factors that may cause our actual results, levels of activity, performance or achievements to be materially different from the information expressed or implied by these forward-looking statements. Although we believe that we have a reasonable basis for each forward-looking statement, we caution you that these statements are based on a combination of facts and factors currently known by us and our projections of the future, about which we cannot be certain. Forward-looking statements include, but are not limited to, statements about: our business model and strategic plans; our expectations regarding manufacturing; our future financial performance; demand for our semiconductor and fiber laser solutions; our ability to develop innovative products; our expectations regarding product volumes and the introduction of new products; our technology and new product research and development activities; the impact of new import and export controls; the impact of changes in regulations and customs, tariffs and trade barriers, or the perception that any of them could occur; the impact of ongoing supply chain disruptions; the impact of inflation; the impact of seasonality; the effect on our business of litigation to which we are or may become a party; and the sufficiency of our existing liquidity sources to meet our cash needs.

You should refer to the "Risk Factors" section of this report for a discussion of other important factors that may cause our actual results to differ materially from those expressed or implied by our forward-looking statements. As a result of these factors, we cannot assure you that the forward-looking statements in this report will prove to be accurate. In addition, statements that "we believe" and similar statements reflect our beliefs and opinions on the relevant subject. These statements are based upon information available to us as of the date of this report, which although we believe such information forms a reasonable basis for such statements, such information may be limited or incomplete, and our statements should not be read to indicate that we have conducted a thorough inquiry into, or review of, all potentially available relevant information. These statements are inherently uncertain and investors are cautioned not to unduly rely upon these statements. Furthermore, if our forward-looking statements prove to be inaccurate, the inaccuracy may be material. In light of the significant uncertainties in these forward-looking statements, you should not regard these statements as a representation or warranty by us or any other person that we will achieve our objectives and plans in any specified time frame, or at all. We undertake no obligation to publicly update any forward-looking statements, whether as a result of new information, future events or otherwise, except as required by law.

Overview

nLIGHT, Inc. is a leading provider of high‑power lasers for mission-critical directed energy, optical sensing, and advanced manufacturing applications. We design, develop, manufacture, integrate and sell a range of high-power semiconductor lasers and fiber lasers and related components, modules and subsystems that are typically integrated into laser systems or manufacturing tools built by us or our customers. We also make high energy pulsed fiber lasers, fiber amplifiers, and beam combination and control systems for use in high-energy laser systems for directed energy and laser sensing systems for use in a wide range of commercial and defense applications. Our long history of commercial technology development and vertical integration enables us to develop products that leverage the same underlying technology across a variety of applications and markets, thereby enabling us to leverage the development of shared technologies in unique combinations to offer innovative and reliable products to customers in each of our end markets. We sell our products into three primary end markets: Aerospace and Defense, Industrial, and Microfabrication.

We operate in two reportable segments consisting of the Laser Products segment and the Advanced Development segment.

Revenues increased to $162.8 million in the six months ended June 30, 2026 compared to $113.4 million in the same period in 2025 due primarily to an increase in both product and development revenue from the Aerospace and Defense end market. We generated net loss of $0.7 million for the six months ended June 30, 2026 compared to a net loss of $11.7 million for the same period in 2025.

Factors Affecting Our Performance

Demand for our Products and Solutions

Our revenue depends largely on market conditions, competitive pressure, and achievement of design wins. We consider a design win to occur when a customer notifies us that it has selected one of our products to be incorporated into a product or system under development by such customer. In the Aerospace and Defense market, our business also depends in large part on continued investment in laser technology by the U.S. government and its allies, and our ability to continue to successfully develop leading technology in this area and commercialize that technology in the future.

Demand for our products also fluctuates based on market cycles, continuously evolving industry supply chains, trade and tariff terms, as well as evolving competitive dynamics in each of our end-markets. Erosion of ASPs of established products is typical in our industry, and the ASPs of our products generally decrease as our products mature. We may also negotiate discounted selling prices from time to time with certain customers that purchase higher volumes, or to penetrate new markets or applications.

Technology and New Product Development

We invest heavily in the development of our semiconductor, fiber laser, directed energy, and laser-sensing technologies to provide solutions to our current and future customers. We anticipate that we will continue to invest in research and development to achieve our technology and product roadmap. Our product development is targeted to specific sectors of the market where we believe the performance of our products provides a significant benefit to our customers. We believe our close coordination with our customers regarding their future product requirements enhances the efficiency of our research and development expenditures.

Manufacturing Costs and Gross Margins

Product gross profit, in absolute dollars and gross margin, may fluctuate from period to period based on product sales mix, sales volumes, changes in ASPs, production volumes, the corresponding absorption of manufacturing overhead expenses, the cost of purchased materials, production costs and manufacturing yields. Product sales mix can affect gross profits due to variations in profitability related to product configurations and cost profiles, customer volume pricing, availability of competitive products in various markets, and new product introductions, among other factors. Even though certain of our products are built offshore by contract manufacturers, capacity utilization affects gross margin because of the fixed cost associated with our U.S.-based manufacturing capabilities. Change in sales and production volumes impact absorption of fixed costs, manufacturing efficiencies and production costs.

Our Development gross profit varies with the type and terms of contracts, contract volume, project mix, changes in the estimated cost of projects at completion, and successful execution on projects during the period. Most of our Development contracts have historically been structured as cost plus fixed fee due to the technical complexity of the research and development services, but we also perform work under fixed price contracts where gross margin can change from period to period based on the estimated cost of the project at completion.

Seasonality

Our quarterly revenues can fluctuate with general economic trends, the timing of capital expenditures by our customers, holidays, and general economic trends. In addition, as is typical in our industry, we tend to recognize a larger percentage of our quarterly revenues in the last month of the quarter, which may impact our working capital trends.

Global Economic Conditions and Trade Policies

We sell our products globally, and a portion of our sales are generated from products that are manufactured outside the United States. or rely on components from suppliers who are located outside of the United States. Changing trade dynamics, including changes in tariffs, export regulations, and customs enforcement, could disrupt our supply chain and production, disrupt customer sales, and increase input costs. We continue to monitor macroeconomic trends, global inflationary pressures, and uncertainties related to international trade policy, including tariff actions and regulatory shifts.

For example, in February 2026, the U.S. Supreme Court issued a ruling invalidating certain tariffs previously imposed under the International Emergency Economic Powers Act (IEEPA). In March 2026, the U.S. Court of International Trade Court issued an additional ruling stating that importers that have paid tariffs under IEEPA are due refunds. In addition, in June 2026, China implemented enhanced export declaration requirements for certain machine tools, unmanned aerial systems, and related components. These new requirements impose more stringent documentation, classification, and reporting obligations on exporters that have resulted in increased compliance costs and longer customs clearance times.

Changes in global economic conditions and international trade uncertainty did not have a material impact on our financial results in the three and six months ended June 30, 2026, but components from certain key suppliers outside the United States have been held in customs in China along with shipments from nLIGHT, Inc. to certain customers outside the United States. If we are unable to mitigate these supply chain disruptions, we expect them to increase our operational complexity, continue to disrupt our production and have a material negative impact on our revenue and profitability in future periods.

Results of Operations

The following table sets forth our operating results as a percentage of revenues for the periods indicated (which may not add up due to rounding):

Revenue: Three Months Ended June 30, 2026 2025 Six Months Ended June 30, 2026 2025
Products 71.9% 66.1% 72.2% 67.5%
Development 28.1 33.9 27.8 32.5
Total revenue 100.0 100.0 100.0 100.0
Cost of revenue:
Products 42.3 40.7 41.6 43.1
Development 26.6 29.4 26.3 28.5
Total cost of revenue 68.9 70.1 67.9 71.6
Gross profit 31.1 29.9 32.1 28.4
Operating expenses:
Research and development 15.9 17.8 15.3 19.7
Sales, general, and administrative 19.6 18.9 19.2 20.9
Restructuring — — 0.2 —
Total operating expenses 35.5 36.7 34.7 40.6
Loss from operations (4.4) (6.8) (2.6) (12.2)
Other income:
Interest income 3.0 1.7 2.5 2.4
Interest expense (0.2) (0.6) (0.3) (0.4)
Other income (expense), net 0.1 (0.1) 0.1 —
Loss before income taxes (1.5) (5.8) (0.3) (10.2)
Income tax expense 0.1 — 0.1 0.1
Net loss (1.6)% (5.8)% (0.4)% (10.3)%

Revenues by End Market

Our revenues by end market were as follows for the periods presented (dollars in thousands):

Three Months Ended June 30, 2026 % of Revenue 2025 % of Revenue Change $%
Aerospace and Defense $57,298 69.4% $40,695 65.9% $16,603 40.8%
Industrial 12,042 14.6 9,746 15.8 2,296 23.6
Microfabrication 13,251 16.0 11,294 18.3 1,957 17.3
$82,591 100.0% $61,735 100.0% $20,856 33.8%
Six Months Ended June 30, 2026 % of Revenue 2025 % of Revenue Change Amount%
Aerospace and Defense $112,425 69.1% $73,401 64.7% $39,024 53.2%
Microfabrication 26,280 16.1 21,400 18.9 4,880 22.8
Industrial 24,067 14.8 18,602 16.4 5,465 29.4
$162,772 100.0% $113,403 100.0% $49,369 43.5%

The increases in revenue from the Aerospace and Defense end market for the three and six months ended June 30, 2026, compared to the same periods in 2025, were driven primarily by increased unit sales of directed energy laser products, increased unit sales of laser components for defense programs, and progress on existing research and development contracts. The increases in revenue from the Microfabrication end market for the three and six months ended June 30, 2026 compared to the same periods in 2025 were primarily attributable to increased unit sales of semiconductor lasers in all regions. The increases in revenue from the Industrial end market for the three and six months ended June 30, 2026, compared to the same periods in 2025, were the result of increased unit sales of additive fiber lasers in North America, partially offset by decreased unit sales of other industrial laser products.

Revenues by Segment

Our revenues by segment were as follows for the periods presented (dollars in thousands):

Three Months Ended June 30, 2026 % of Revenue 2025 % of Revenue Change $%
Laser Products $59,363 71.9% $40,824 66.1% $18,539 45.4%
Advanced Development 23,228 28.1 20,911 33.9 2,317 11.1
$82,591 100.0% $61,735 100.0% $20,856 33.8%
Six Months Ended June 30, 2026 % of Revenue 2025 % of Revenue Change Amount%
Laser Products $117,565 72.2% $76,502 67.5% $41,063 53.7%
Advanced Development 45,207 27.8 36,901 32.5 8,306 22.5
$162,772 100.0% $113,403 100.0% $49,369 43.5%

The increases in Laser Products revenue for the three and six months ended June 30, 2026 compared to the same periods in 2025 were the result of increased unit sales across all end markets. The increases in Advanced Development revenue for the three and six months ended June 30, 2026, compared to the same periods in 2025, were driven by progress on existing research and development contracts. All Advanced Development revenue is included in the Aerospace and Defense market.

Revenues by Geographic Region

Our revenues by geographic region were as follows for the periods presented (dollars in thousands):

Three Months Ended June 30, 2026 % of Revenue 2025 % of Revenue Change $%
North America $59,498 72.0% $45,171 73.2% $14,327 31.7%
Asia Pacific 9,186 11.1 8,662 14.0 524 6.1
EMEA(1) 13,907 16.9 7,902 12.8 6,005 76.0
$82,591 100.0% $61,735 100.0% $20,856 33.8%
Six Months Ended June 30, 2026 % of Revenue 2025 % of Revenue Change Amount%
North America $118,753 73.0% $81,256 71.6% $37,497 46.1%
Asia Pacific 21,058 12.9 17,790 15.7 3,268 18.4
EMEA(1) 22,961 14.1 14,357 12.7 8,604 59.9
$162,772 100.0% $113,403 100.0% $49,369 43.5%

(1) EMEA consists of Europe, the Middle East, and Africa.

Geographic revenue information is based on the location to which we ship our products. The increases in North America revenues for the three and six months ended June 30, 2026 compared to the same periods in 2025, were due to increased revenue across all end markets, with revenue from the Aerospace and Defense end market representing most of the increase.

The increase in Asia Pacific revenue for the three months ended June 30, 2026 compared to the same period in 2025 was driven by increased revenue from the Industrial and Microfabrication end markets, while the increase in Asia Pacific revenue for the six months ended June 30, 2026 was driven by increased revenue from the Aerospace and Defense and Microfabrication end markets, partially offset by decreased revenue from the Industrial end market.

The increases in EMEA revenues for the three and six months ended June 30, 2026 compared to the same periods in 2025, were due to increased revenue from the Aerospace and Defense and Microfabrication end markets, partially offset by decreased revenue from the Industrial end market.

Cost of Revenues and Gross Margin

Cost of Laser Products revenue consists primarily of manufacturing materials, labor, shipping and handling costs, tariffs and manufacturing-related overhead. We order materials and supplies based on backlog and forecasted demand from our customers. We expense all warranty costs and inventory provisions as cost of revenues.

Cost of Advanced Development revenue consists of materials, labor, subcontracting costs, and an allocation of indirect costs including overhead and general and administrative.

Our gross profit and gross margin were as follows for the periods presented (dollars in thousands):

Three Months Ended June 30, 2026 Products Development Total 2025 Products Development Total
Gross profit $24,434 $1,291 $25,725 $15,719 $2,738 $18,457
Gross margin 41.2% 5.6% 31.1% 38.5% 13.1% 29.9%

24

Six Months Ended June 30, 2026 Products Development Total 2025 Products Development Total
Gross profit $49,826 $2,412 $52,238 $27,673 $4,583 $32,256
Gross margin 42.4% 5.3% 32.1% 36.2% 12.4% 28.4%

The increase in Laser Products gross margin for the three and six months ended June 30, 2026 compared to the same periods in 2025 were driven primarily by sales mix and the impact of increased production volumes on fixed manufacturing costs due to the overall increase in sales. The decrease in development gross margin for the three and six months ended June 30, 2026 compared to the same periods in 2025 was primarily the result of an increase in revenue from cost-plus fixed fee (CPFF) contracts relative to firm fixed price (FFP) contracts. CPFF contracts generally have a lower average gross margin than FFP contracts.

Operating Expenses

Our operating expenses were as follows for the periods presented (dollars in thousands):

Research and Development

Three Months Ended June 30, 2026 2025 Change $%
Research and development $13,130 $11,012 $2,118 19.2%
Six Months Ended June 30, 2026 2025 Change Amount%
Research and development $24,976 $22,386 $2,590 11.6%

The increases in research and development expense for the three and six months ended June 30, 2026 compared to the same periods in 2025 were primarily attributable to increases in employee and incentive compensation and increases in stock-based compensation of $0.8 million and $1.3 million for the three and six months ended June 30, 2026, respectively.

Sales, General and Administrative

Three Months Ended June 30, 2026 2025 Change $%
Sales, general, and administrative $16,162 $11,681 $4,481 38.4%
Six Months Ended June 30, 2026 2025 Change Amount%
Sales, general, and administrative $31,253 $23,716 $7,537 31.8%

The increases in sales, general and administrative expense for the three and six months ended June 30, 2026, compared to the same periods in 2025, were driven primarily by increases in employee and incentive compensation, and increases in stock-based compensation of $3.1 million and $7.0 million, respectively, partially offset by decreases in bad debt recoveries and a higher allocation of costs from sales, general and administrative to development projects.

Interest Income

Three Months Ended June 30, 2026 2025 Change $%
Interest income $2,474 $1,108 $1,366 123.3%
Six Months Ended June 30, 2026 2025 Change Amount%
Interest income $4,036 $2,796 $1,240 44.3%

The increases in interest income for the three and six months ended June 30, 2026, compared to the same periods in 2025, were driven primarily by an increase in the average balance of cash, cash equivalents and marketable securities.

Interest income is primarily earned from our marketable securities (U.S. treasuries), recognized using the effective yield method, and cash equivalents (money market securities).

Interest expense

Three Months Ended June 30, 2026 2025 Change $%
Interest expense $(204) $(388) $184 (47.4)%
Six Months Ended June 30, 2026 2025 Change Amount%
Interest expense $(504) $(436) $(68) 15.6%

The changes in interest expense for the three and six months ended June 30, 2026, compared to the same periods in 2025, were primarily driven by the timing of our borrowing and repayment of $20.0 million under the line of credit (LOC). During the three months ended March 31, 2025, we drew $20.0 million under the LOC. During the three months ended June 30, 2026, we repaid the $20.0 million LOC balance. Interest expense on the LOC was $0.2 million and $0.5 million for the three and six months ended June 30, 2026, respectively.

Other Income, net

Three Months Ended June 30, 2026 2025 Change $%
Other income (expense), net $33 $(58) $91 NM*
Six Months Ended June 30, 2026 2025 Change Amount%
Other income (expense), net $188 $(44) $232 NM*

*NM - Not meaningful.

Other income, net is primarily attributable to changes in net realized and unrealized foreign exchange transactions resulting from currency rate fluctuations.

Income Tax Expense

Three Months Ended June 30, 2026 2025 Change $%
Income tax expense $75 $17 $58 341.2%
Six Months Ended June 30, 2026 2025 Change Amount%
Income tax expense $128 $154 $(26) (16.9)%

We record income tax expense for taxes in our foreign jurisdictions including Finland, Italy, Austria, and South Korea. While our tax expense is largely dependent on the geographic mix of earnings related to our foreign operations, we also record tax expense for uncertain tax positions taken and associated penalties and interest. We consider all available evidence, both positive and negative, in assessing the extent to which a valuation allowance should be applied against our deferred tax assets. Due to the uncertainty with respect to their ultimate realizability, we continue to maintain a full valuation allowance on deferred tax assets in the United States, and a partial valuation allowance in China as of June 30, 2026. Our effective tax rate may vary from period to period based on changes in estimated taxable income or loss by jurisdiction, changes to the valuation allowance, changes to U.S. federal, state or foreign tax laws, future expansion into areas with varying country, state, and local income tax rates and deductibility of certain costs and expenses by jurisdiction.

The increase in income tax expense for the three months ended June 30, 2026 compared to the same period in 2025 was driven by an increase in valuation allowance in China that was partially reduced by a decrease in income in foreign jurisdictions and a discrete tax benefit for expiring statutes of limitations on unrecognized tax positions in the second quarter of 2026.

The decrease in income tax expense for the six months ended June 30, 2026 compared to the same period in 2025 was driven by a decrease in income in foreign jurisdictions and discrete tax benefits for expiring statutes of limitations on unrecognized tax positions that were partially reduced by an increase in valuation allowance in China in the second quarter of 2026. Our tax expense is dependent on the geographic mix of earnings and primarily related to our foreign operations.

Liquidity and Capital Resources

We had cash and cash equivalents and restricted cash of $296.1 million and $99.0 million as of June 30, 2026 and December 31, 2025, respectively. In addition, we had marketable securities of $34.7 million and $34.9 million at June 30, 2026 and December 31, 2025, respectively. Our total balance of cash, cash equivalents, restricted cash and marketable securities increased by $196.8 million from December 31, 2025 to June 30, 2026.

For the six months ended June 30, 2026, our principal sources of liquidity were from our public offering and cash collected from customers. We believe our existing sources of liquidity will be sufficient to meet our working capital and capital expenditure needs for at least the next 12 months. Our future capital requirements may vary materially from period to period and will depend on many factors, including the timing and extent of spending on research and development efforts, the expansion of sales and marketing activities, the continuing market acceptance of our products and ongoing investments to support the growth of our business. We may in the future enter into arrangements to acquire or invest in complementary businesses, services, technologies and intellectual property rights. From time to time, we may explore additional financing sources which could include equity, equity‑linked and debt financing arrangements.

The following table summarizes our cash flows for the periods presented (in thousands):

Six Months Ended June 30, 2026 2025
Net cash provided by (used in) operating activities $30,416 $(1,405)
Net cash used in investing activities (6,218) (4,383)
Net cash provided by financing activities 172,970 18,486
Effect of exchange rate changes on cash (106) 287
Net increase in cash, cash equivalents and restricted cash $197,062 $12,985

Net Cash Provided by Operating Activities

During the six months ended June 30, 2026, net cash provided by operating activities was $30.4 million, which was the result of cash provided by net working capital of $1.6 million and by non-cash expenses totaling $29.5 million related primarily to depreciation, amortization, and stock-based compensation, offset by net loss of $0.7 million. The cash provided by net working capital in the six months ended June 30, 2026 was driven by a $9.2 million increase in deferred revenues, $4.0 million decrease in accounts receivable, $3.0 million increase in accounts payable, and $0.5 million decrease in other assets, net. The cash provided by working capital was offset by a $8.5 million increase in prepaid expenses and other current assets, $3.0 million increase in inventory, $2.2 million decrease in accrued and other long-term liabilities, $1.3 million decrease in lease liabilities, and $0.2 million decrease in non-current income taxes payable.

Net Cash Used in Investing Activities

During the six months ended June 30, 2026, net cash used in investing activities was $6.2 million, which was driven by net capital expenditures of $7.0 million, offset by the net proceeds from maturities and sales of marketable securities of $0.7 million.

Net Cash Provided by Financing Activities

During the six months ended June 30, 2026, net cash provided by financing activities was $173.0 million, which consisted of proceeds from our public offering, net of underwriting discounts and offering costs, of $191.3 million and proceeds from stock option exercises and employee stock plan purchases of $1.9 million, offset by repayment of $20.0 million of the LOC and tax payments related to stock award issuances of $0.2 million.

Credit Facilities

We have a $40.0 million revolving LOC with Banc of California dated September 24, 2018, which is secured by our assets and matures on September 24, 2027. The LOC agreement contains restrictive and financial covenants, including a minimum total cash covenant, and bears an unused credit fee of 0.25% on an annualized basis. The interest rate of 5.75% on the LOC at June 30, 2026 is based on the Prime Rate, minus a margin based on our liquidity levels.

As of June 30, 2026, no amounts were outstanding on the LOC and we were in compliance with all covenants. The remaining $40.0 million unused portion of the LOC is available for borrowing.

Contractual Obligations

There have been no material changes to our contractual obligations as previously disclosed in our Annual Report on Form 10-K for the year ended December 31, 2025.

Market risk

As filed, 365 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

For financial market risks related to changes in interest rates and foreign currency exchange rates, reference is made to Item 7A, “Quantitative and Qualitative Disclosures about Market Risk,” contained in Part II of our Annual Report on Form 10-K for the year ended December 31, 2025. Our exposure to market risk has not changed materially since December 31, 2025.

Controls and procedures

As filed, 2,440 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Evaluation of Disclosure Controls and Procedures

Our management, with the participation of our chief executive officer and our chief financial officer, have evaluated our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act) as of the end of the period covered by this report. Based on that evaluation, our chief executive officer and our chief financial officer have concluded that, as of such date, our disclosure controls and procedures were, in design and operation, effective.

Changes in Internal Control over Financial Reporting

There were no changes in our internal control over financial reporting that occurred during the three months ended June 30, 2026 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

Limitations on the Effectiveness of Internal Control

Control systems, including ours, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the control systems’ objectives are being met. Further, the design of any control systems must reflect the fact that there are resource constraints, and the benefits of all controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within our company have been detected. These inherent limitations include the realities that judgments in decision making can be faulty and that breakdowns can occur because of simple error or mistake. Control systems can also be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the controls. The design of any system of controls is based, in part, on certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions. Over time, controls may become inadequate because of changes in conditions or deterioration in the degree of compliance with policies or procedures. We intend to continue to monitor and upgrade our internal controls as necessary or appropriate for our business, but cannot assure you that such improvements will be sufficient to provide us with effective internal control over financial reporting.

Risk factors

As filed, 3,198 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

For risk factors related to our business, reference is made to Item 1A, "Risk Factors," contained in Part I of our Annual Report on Form 10-K for the year ended December 31, 2025. Except as disclosed below, there have been no material changes to the risk factors disclosed in our Annual Report on Form 10-K for the year ended December 31, 2025.

We are subject to U.S. and international governmental export and import controls that could adversely impact our supply chain, subject us to liability, impair our ability to compete and otherwise adversely affect our business, financial condition, results of operations and growth prospects.

The United States and various foreign governments have imposed controls, export license requirements and restrictions on the import or export of certain products, technologies, and software. For example, the U.S. government has imposed controls restricting the ability to send certain products and technology related to lasers, semiconductors, semiconductor manufacturing and supercomputing to and within China and additional destinations and is expected to further expand these controls. These controls may impact our ability to export certain products and technology to China and other destinations and restrict our ability to use certain components in our products.

Foreign governments also impose trade restrictions and retaliate in ways that could adversely impact our business, for example by imposing export control regimes placing export or other license requirements or restrictions on certain products or materials. These restrictions could increase the cost of, or delay or prevent the shipment of, components or inputs used to produce our products. For example, in June 2026, China implemented enhanced export declaration requirements for certain machine tools, unmanned aerial systems and related components. These new requirements impose more stringent documentation, classification, and reporting obligations on exporters that have resulted in increased compliance costs and longer customs clearance times. If we are unable to mitigate the supply chain disruptions caused by China’s new customs requirements, we expect it to increase our operational complexity, continue to disrupt our production and have a material negative impact on our revenue and profitability in future periods.

We must export our products in compliance with applicable export controls, and we may not always be successful in obtaining necessary export licenses. Denials of export licenses or limitations imposed by such laws on our ability to export or sell our products may harm our international and domestic revenues. Furthermore, noncompliance by us or any of our customers with these laws could have negative consequences, including government investigations, penalties and reputational harm. Any failure by us or any of our customers to adequately comply with these laws could result in civil fines or suspension or loss of our export privileges, as well as substantial expense and diversion of management resources and attention, any of which could materially adversely affect our business, financial condition, results of operations and growth prospects.

Figures reported in this filing

Standardized line items from the XBRL in this filing, for the period ended 2026-06-30. Comparative periods it repeats are left out.

Figures reported in this filing
Line itemPeriodValueXBRL concept
Revenue3 months2026-04-01 to 2026-06-30$82.6mus-gaap:RevenueFromContractWithCustomerExcludingAssessedTax
Revenue6 months2026-01-01 to 2026-06-30$162.8mus-gaap:RevenueFromContractWithCustomerExcludingAssessedTax
Cost of revenue3 months2026-04-01 to 2026-06-30$56.9mus-gaap:CostOfRevenue
Cost of revenue6 months2026-01-01 to 2026-06-30$110.5mus-gaap:CostOfRevenue
Gross profit3 months2026-04-01 to 2026-06-30$25.7mus-gaap:GrossProfit
Gross profit6 months2026-01-01 to 2026-06-30$52.2mus-gaap:GrossProfit
Research and development3 months2026-04-01 to 2026-06-30$13.1mus-gaap:ResearchAndDevelopmentExpense
Research and development6 months2026-01-01 to 2026-06-30$25.0mus-gaap:ResearchAndDevelopmentExpense
Selling, general and administrative3 months2026-04-01 to 2026-06-30$16.2mus-gaap:SellingGeneralAndAdministrativeExpense
Selling, general and administrative6 months2026-01-01 to 2026-06-30$31.3mus-gaap:SellingGeneralAndAdministrativeExpense
Operating income3 months2026-04-01 to 2026-06-30−$3.6mus-gaap:OperatingIncomeLoss
Operating income6 months2026-01-01 to 2026-06-30−$4.3mus-gaap:OperatingIncomeLoss
Interest expense3 months2026-04-01 to 2026-06-30$204.0kus-gaap:InterestExpenseNonoperating
Interest expense6 months2026-01-01 to 2026-06-30$504.0kus-gaap:InterestExpenseNonoperating
Income tax3 months2026-04-01 to 2026-06-30$75.0kus-gaap:IncomeTaxExpenseBenefit
Income tax6 months2026-01-01 to 2026-06-30$128.0kus-gaap:IncomeTaxExpenseBenefit
Net income3 months2026-04-01 to 2026-06-30−$1.3mus-gaap:NetIncomeLoss
Net income6 months2026-01-01 to 2026-06-30−$694.0kus-gaap:NetIncomeLoss
Diluted EPS3 months2026-04-01 to 2026-06-30−$0.02us-gaap:EarningsPerShareDiluted
Diluted EPS6 months2026-01-01 to 2026-06-30−$0.01us-gaap:EarningsPerShareDiluted
Basic EPS3 months2026-04-01 to 2026-06-30−$0.02us-gaap:EarningsPerShareBasic
Basic EPS6 months2026-01-01 to 2026-06-30−$0.01us-gaap:EarningsPerShareBasic
Diluted shares (weighted)3 months2026-04-01 to 2026-06-3056,983,000 sharesus-gaap:WeightedAverageNumberOfDilutedSharesOutstanding
Diluted shares (weighted)6 months2026-01-01 to 2026-06-3055,560,000 sharesus-gaap:WeightedAverageNumberOfDilutedSharesOutstanding
Operating cash flow6 months2026-01-01 to 2026-06-30$30.4mus-gaap:NetCashProvidedByUsedInOperatingActivities
Capital expenditure6 months2026-01-01 to 2026-06-30$7.0mus-gaap:PaymentsToAcquirePropertyPlantAndEquipment
Cash and equivalentsAt period end2026-06-30$295.8mus-gaap:CashAndCashEquivalentsAtCarryingValue
Current assetsAt period end2026-06-30$447.4mus-gaap:AssetsCurrent
Total assetsAt period end2026-06-30$517.6mus-gaap:Assets
Current liabilitiesAt period end2026-06-30$54.7mus-gaap:LiabilitiesCurrent
Total liabilitiesAt period end2026-06-30$77.7mus-gaap:Liabilities
Shareholders' equityAt period end2026-06-30$439.9mus-gaap:StockholdersEquity

Source: SEC EDGAR, the filing index for accession 0001124796-26-000038. Last ingested by Listed: Nov 13, 2026, 16:47 ET. Listed shows no prices and gives no investment advice.