Listed

Motorcar Parts of America Inc: Form 10-K for the period ended Mar 31, 2025

Filed with the SEC on Jun 9, 2025 and accepted by EDGAR at Jun 9, 2025, 16:01 ET.

Share

Business

As filed, 27,802 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

General

We are a leading supplier of automotive aftermarket non-discretionary replacement parts and test solutions and diagnostic equipment -- building upon industry leading technology to be “The Global Leader for Parts and Solutions that Move Our World Today and Tomorrow”. We operate in the $130 billion automotive aftermarket for replacement hard parts in North America. Our hard parts products include light-duty rotating electrical products, wheel hub products, brake-related products, and turbochargers. In addition, we sell test solutions and diagnostic equipment, which were added with our acquisitions of D&V Electronics Ltd. in July 2017 and Mechanical Power Conversion, LLC in December 2018 and heavy-duty rotating electrical products, which were added with our January 2019 acquisition of Dixie Electric, Ltd.

The automotive aftermarket is divided into two markets. The first is the do-it-yourself (“DIY”) market, which is generally serviced by the large retail chain outlets and online resellers. Consumers who purchase parts from the DIY market generally install parts into their vehicles themselves. In most cases, this is a less expensive alternative than having the repair performed by a professional installer. The second is the professional installer market, commonly known as the do-it-for-me (“DIFM”) market. Traditional warehouse distributors, dealer networks, and commercial divisions of retail chains service this market. Generally, the consumer in this market is a professional parts installer. Our products are distributed to both the DIY and DIFM markets. The distinction between these two markets has become less defined over the years, as retail outlets leverage their distribution strength and store locations to attract customers.

Demand for replacement parts generally increases with the age of vehicles and miles driven, which provides favorable opportunities for sales of our products. The current population of light-duty vehicles in the U.S. is approximately 292 million, and the average age of these vehicles is approximately 13 years and is expected to continue to grow, in particular during recession years. Although miles driven can fluctuate for various reasons, including fuel prices, they have been generally increasing for several years.

In addition, we operate in the $11 billion-plus rapidly emerging global market for automotive test solutions and diagnostic equipment and see the opportunity for accelerating growth rates for today and the future as electrification becomes increasingly important around the world. We also operate in the $40 billion market for medium and heavy-duty automotive aftermarket replacement parts for truck, industrial, marine, and agricultural applications.

Growth Strategies and Key Initiatives

With a scalable infrastructure and abundant growth opportunities, we are focused on growing our aftermarket business in the North American marketplace and growing our leadership position in the test solutions and diagnostic equipment market by providing innovative and intuitive solutions to our customers.

To accomplish our strategic vision, we are focused on the following key initiatives:

Hard Parts

Grow our current product lines both with existing and potential new customers. We continue to develop and offer current and new sales programs to ensure that we are supporting our customers’ business needs. We remain dedicated to managing growth and continuing to focus on enhancements to our infrastructure and making investments in resources to support our customers. We have globally positioned manufacturing and distribution centers to support our continuous growth.

Introduction of new product lines. While we have not introduced any new product lines recently, we have expanded our product coverage for existing product lines, and we continue to engage with our customers to identify potential new product opportunities to grow our business.

Creating value for our customers. A core part of our strategy is ensuring that we add meaningful value for our customers. We consistently support and pilot our customers’ supply management initiatives in addition to providing demand analytics, inventory management services, online training guides, and market share and retail store layout information to our customers.

Technological innovation. We continue to develop in-house technologies and advanced testing methods. This elevated level of technology aims to deliver our customers high quality products and support services.

Test Solutions and Diagnostic Equipment

We provide industry-leading test solutions and diagnostic equipment to both original equipment manufacturers and the aftermarket. We are continuously upgrading our equipment to accommodate testing for the latest alternator and starter technology for both existing and new customers. These software and hardware upgrades are also available for existing products that the customer is using. In addition, we provide industry leading maintenance and service support to provide a better end-user experience and value to our customers.

Market and grow our new product lines on a global basis. We offer products and services that cater to automotive test solutions and diagnostic equipment for inverter and electric motors for both development and production. In addition, we provide power supply hardware and emulation software diagnostic products. Our strategy is to market these products on a global basis to original equipment manufacturers as well as suppliers to the original equipment manufacturers for development and production of electric vehicles and electric vehicle charging systems. We believe this is a rapidly emerging business and see the opportunity for accelerating growth rates. In addition, we are well-positioned to supply the aerospace industry to support its shift to electric power-driven control systems in airplanes.

Heavy Duty

Market and grow our innovative design solutions and commitment to quality. We continue to develop and improve product performance, ease of installation, and coverage simplification to deliver installation-ready products to provide extended service life and reduced downtime for our customers.

Products

We carry approximately 44,000 stock keeping units (“SKUs”) to support automotive aftermarket non-discretionary replacement parts. Our products are sold under our customers’ widely recognized private label brand names and our own brand names including Quality-Built®, Pure Energy®, D&V Electronics®, Dixie Electric®, and DelStar®.

Our products include: (i) rotating electrical products such as alternators and starters, (ii) wheel hub assemblies and bearings, (iii) brake-related products, which include brake calipers, brake boosters, brake rotors, brake pads, and brake master cylinders, (iv) turbochargers, (v) test solutions and diagnostic equipment products, and (vi) heavy-duty products.

Segment Reporting

Our three operating segments are as follows:

Hard Parts, which includes (i) light duty rotating electric products such as alternators and starters, (ii) wheel hub products, (iii) brake-related products, including brake calipers, brake boosters, brake rotors, brake pads and brake master cylinders, and (iv) turbochargers,

Test Solutions and Diagnostic Equipment, which includes (i) applications for combustion engine vehicles, including bench-top testers for alternators and starters, (ii) equipment for the pre- and post-production of electric vehicles, and (iii) software emulation of power system applications for the electrification of all forms of transportation (including automobiles, trucks, the emerging electrification of systems within the aerospace industry, and electric vehicle charging stations), and

Heavy Duty, which includes non-discretionary automotive aftermarket replacement hard parts for heavy-duty truck, industrial, marine, and agricultural applications.

Our Hard Parts operating segment meets the criteria of a reportable segment. The Test Solutions and Diagnostic Equipment and Heavy Duty segments are not material, and are not required to be separately reported. See Note 20 of the notes to consolidated financial statements for more information.

Sales, Marketing and Distribution

We sell our hard parts products to the largest automotive chains, including Advance Auto Parts, AutoZone, Genuine Parts (NAPA), and O’Reilly Auto Parts with an aggregate of approximately 26,000 retail outlets. In addition, these products are sold to warranty replacement programs (“OES”) customers, professional installers, and a diverse group of automotive warehouse distributors. Our heavy-duty products, which have some overlap with the light-duty automotive aftermarket, are also sold via specialty distribution channels through OES, fleet, and auto electric outlets. We also sell test solutions and diagnostic equipment to the automotive chains listed above and via direct and indirect sales channels, technical conferences, and trade shows to some of the world’s leading automotive companies, and to the aerospace/aviation sector. We offer testing services at our technical center located in Detroit, Michigan. During fiscal 2025, we sold approximately 98% of our products in North America, with approximately 2% of our products sold in Asian and European countries.

We publish printed and electronic catalogs with part numbers and applications for our products along with a detailed technical glossary and informational database. In addition, we publish printed and electronic product and service brochures and data sheets for our test solutions and diagnostic equipment and service offerings. We believe that we maintain one of the most extensive catalog and product identification systems available to the market.

We primarily ship our products from our facilities and various third-party warehouse distribution centers in North America, including our 410,000 square foot distribution center in Tijuana, Mexico. In addition, during fiscal 2025, we added a new warehousing and distribution facility in Malaysia to support our future direct shipment programs.

Customers: Customer Concentration. While we continually seek to diversify our customer base, we currently derive, and have historically derived, a substantial portion of our sales from a small number of large customers. Sales to our three largest customers in the aggregate represented 86%, 83%, and 84%, and sales to our largest customer, represented 39%, 35%, and 37% of our net sales during fiscal 2025, 2024 and 2023, respectively. Any meaningful reduction in the level of sales to any of these customers, deterioration of the financial condition of any of these customers or the loss of any of these customers could have a materially adverse impact on our business, results of operations, and financial condition.

Customer Arrangements: Impact on Working Capital. We have various length agreements with our customers. Under these agreements, which in most cases have initial terms of at least four years, we are designated as the exclusive or primary supplier for specified categories of our products. Because of the very competitive nature of the market and the limited number of customers for these products, our customers have sought and obtained price concessions, significant marketing allowances and more favorable delivery and payment terms in consideration for our designation as a customer’s exclusive or primary supplier. These incentives differ from contract to contract and can include: (i) the purchase of Remanufactured Core inventory on customer shelves, (ii) the issuance of a specified amount of credits against receivables in accordance with a schedule set forth in the relevant contract, (iii) support for a particular customer’s research or marketing efforts provided on a scheduled basis, (iv) discounts granted in connection with each individual shipment of product, and (v) store expansion or product development support. These contracts typically require that we meet ongoing performance standards.

While these longer-term agreements strengthen our customer relationships, the increased demand for our products often requires that we increase our inventories and personnel. Customer demands that we purchase and maintain their Remanufactured Core inventory also requires the use of our working capital. The marketing and other allowances we typically grant our customers in connection with our new or expanded customer relationships adversely impact near-term revenues, profitability and associated cash flows from these arrangements. However, we believe the investment we make in these new or expanded customer relationships will improve our overall liquidity and cash flow from operations over time.

Competition

Our business is highly competitive. We compete with several large and medium-sized companies, including (i) Terrepower, First Brands and DRIV for hard parts, (ii) Burke Porter and Langdi Measurement Control for test solutions and diagnostic equipment, and (iii) a large number of smaller regional and specialty companies. We also compete with other overseas manufacturers, particularly those located in Asia who are increasing their operations and could become a significant competitive force in the future.

We believe that the reputations for quality, reliability, and customer service that a supplier provides are significant factors in our customers’ purchase decisions. We continuously strive to increase our competitive and technical advantages as the industry and technologies rapidly evolve. Our advanced power emulators are protected by U.S. patents that provide us a strong competitive barrier for a large segment of the market and allow us to be lower cost and more efficient.

We believe our ability to educate also helps to distinguish us from many of our competitors. We have created an online library of video courses, aimed at supporting our customers as they seek to train the next generation of technicians. We also offer live and web-based training courses via our education center within our Torrance, California headquarters. We believe our ability to provide quality replacement automotive parts, rapid and reliable delivery capabilities as well as promotional support also distinguishes us from many of our competitors. In addition, favorable pricing, our core exchange programs, and extended payment terms are also very important competitive factors in customers’ purchase decisions.

We seek to protect our proprietary processes and other information by relying on trade secret laws and non-disclosure and confidentiality agreements, as well as limiting the number of employees and other persons who have access to that information.

Operations

Production Process for Non-discretionary Replacement Parts. The majority of our products are remanufactured at our facilities in Mexico, Canada, and to a lesser extent in Malaysia. We also manufacture and assemble new products at our facilities in Canada, Malaysia and India. Our remanufacturing process begins with the receipt of Used Cores from our customers or core brokers. The Used Cores are evaluated for inventory control purposes and then sorted by part number. Each Used Core is completely disassembled into its fundamental components. The components are cleaned in an environmentally sound process that employs customized equipment and cleaning materials in accordance with the required specifications of the particular component. All components known to be subject to major wear and those components determined not to be reusable or repairable are replaced by new components. Non-salvageable components of the Used Core are sold as scrap.

After the cleaning process is complete, the salvageable components of the Used Core are inspected and tested as prescribed by our IATF 16949 and ISO 9001:2015 approved quality programs, which have been implemented throughout the production processes. IATF 16949 and ISO 9001:2015 are internationally recognized, world class, quality programs. Upon passage of all tests, which are monitored by designated quality control personnel, all the component parts are assembled in a work cell into a finished product. Inspection and testing are conducted at multiple stages of the remanufacturing process, and each finished product is inspected and tested on equipment designed to simulate performance under operating conditions. To maximize remanufacturing efficiency, we store component parts ready for assembly in our production facilities.

Our remanufacturing processes combine product families with similar configurations into dedicated factory work cells. This remanufacturing process, known as “lean manufacturing,” eliminates a large number of inventory moves and the need to track inventory movement through the remanufacturing process. This manufacturing enables us to significantly reduce the time it takes to produce a finished product. We continue to explore opportunities for improving efficiencies in our remanufacturing process.

Production Process for Test Solutions and Diagnostic Equipment. Our test solutions and diagnostic equipment are engineered and manufactured in North America at facilities in Toronto, Canada and Binghamton, New York, U.S. Our facility in Canada is certified under ISO 9001:2015 quality management system, which mandates that we foster continuous improvement to our manufacturing processes. Materials for custom systems are purchased in a “just-in-time” environment while materials for standard systems are purchased in economic quantities. All materials and components are inspected and tested when required. Certain components require certificates of compliance or test results from our vendors prior to shipping to us. Our manufacturing process combines skilled labor from certified and licensed technicians with raw materials, manufactured components, purchased components, and purchased capital components to complete our test solutions and diagnostic equipment. All test solutions and diagnostic equipment are inspected and tested per our quality control program, which has been approved by the ISO 9001:2015 quality management system.

Our facility in New York, U.S., manufactures test solutions and diagnostic equipment using purchased electronic and custom components that are primarily assembled at this facility. While some circuit card assemblies are handled by outside subcontractors, most of the assemblies are manufactured in-house along with the fabrication of electronic subassemblies. Quality control and testing is completed on these subassemblies prior to their final installation into the overall equipment rack that includes mechanical, electrical and thermal management operations. Final inspection and acceptance testing are performed to predefined procedures prior to the equipment being packaged in a crate for shipment.

Used Cores. The majority of our Used Cores are obtained from customers through the core exchange programs. To supplement Used Cores received from our customers we purchase Used Cores from core brokers. Although this is not a primary source of Used Cores, it is a critical source for meeting our raw material demands. Remanufacturing consumes, on average, more than one Used Core for each remanufactured unit produced since not all Used Cores are reusable. The yield rates depend upon both the product and customer specifications.

We recycle materials, including metal from the Used Cores and corrugated packaging, in keeping with our focus as a remanufacturer to lessen our footprint on the environment.

Purchased Finished Goods. In addition to our remanufactured goods, we also purchase finished goods from various approved suppliers, including several located in Asia. We perform supplier qualification, product inspection and testing according to our IATF 16949 or ISO 9001:2015 certified quality systems to assure product quality levels. We also perform periodic site audits of our suppliers’ manufacturing facilities.

Environmental, Social and Governance (ESG) and Human Capital

Our Culture. Our Company was founded in 1968 on the values of integrity, common decency and respect for others. Our core values are Excellence, Passion/Productivity, Innovation/Integrity, Community, and Quality (“EPICQ”) and characterize our daily corporate focus. These values are embodied in our Code of Business Conduct and Ethics, which has been adopted by our Board of Directors to serve as a statement of principles to guide our decision-making and reinforce our commitment to these values in all aspects of our business. We believe that our commitment to our Company, our employees and the communities within which we operate has led to high employee satisfaction and low employee turnover, and our commitment to our customers, suppliers and business partners has resulted in high customer satisfaction, as evidenced by the customer awards that we routinely win, and decades-long customer relationships.

Environmental. Environmental and sustainable processes have been our hallmark since the Company’s establishment. We take our commitment to environmental stewardship seriously. The use of Remanufactured Cores results in a substantial reduction of raw materials and energy consumption. With the potential to significantly reduce material and energy consumption, industry sources believe that remanufacturing is the most efficient and sustainable process for producing aftermarket replacement parts – making our business practices green by nature. See more information on this at investors.motorcarparts.com/esg. Highlights of our eco-friendly remanufacturing processes include:

sorting the Used Cores returned by customers utilizing an innovative and efficient core-sorting process;

reconditioning and re-utilizing durable components after passing rigorous testing processes;

savings of raw materials due to a reduction in the required materials used in the remanufacturing production process, compared with new product processes; and

recycling of water, cardboard, and metal.

Human Capital. We regard our team members as integral to our strategic growth and success. We recognize that safety, inclusion, and offering exciting opportunities are fundamental to facilitating high retention and satisfaction of high performance team members. Equally important, we provide competitive compensation and excellent benefit programs, and support numerous programs that build connections between our team members and their communities. We believe our team members share our corporate ethics and values, as demonstrated in their daily interactions with customers, co-workers, vendors, and the public at large.

As of March 31, 2025, we employed approximately 5,700 people, with 300 people in the United States, 5,000 people in Mexico, 200 people in Canada, and 200 people in Malaysia and China. Approximately 5,300 people are production employees. We have non-union and unionized facilities. Approximately 4,900 production employees are covered by a local union in Mexico. We believe we have a strong relationship with the union that represents our employees.

Inclusion and Diversity. Our board is ethnically diverse and comprised of eight independent directors, including two women. We believe an inclusive workforce is critical to our success, with an ongoing focus on the hiring, retention, and advancement of women and other underrepresented ethnic groups. We employ 37% women and 63% men globally. In the United States, 66% of our workforce are considered ethnic minorities.

Health, Safety and Wellness. The success of our business is connected to the safety and well-being of our team members and their families. We provide our employees and their families with flexible and convenient health and wellness programs – including protection and security to lessen concerns about missing work and the potential financial impact. Our programs are intended to support the physical and mental well-being with the tools and resources for employees to improve or maintain their health, and we encourage engagement in healthy behaviors for team members and their families.

Compensation and benefits. We provide competitive compensation and benefit programs that meet the needs of our employees, and are tailored to their local markets. In addition to wages and salaries, these programs may include annual cash bonuses, stock awards, a 401(k) Plan, healthcare, and insurance. We have also implemented methodologies to manage performance, provide feedback and develop talent.

Social Responsibility. We are firmly committed to social responsibility. While safety, respect, and inclusion have always been fundamental to our company, these qualities are more important than ever. Our socially responsible initiatives include subsidized food programs for certain employees, donations to community organizations, sponsorship of sport teams and weekend family events.

Information Security and Risk Oversight

We have an information security risk program committed to regular risk management practices surrounding the protection of confidential data. This program includes various technical controls, including security monitoring, data leakage protection, network segmentation and access controls around the computer resources that house confidential or sensitive data. We have also implemented employee awareness training programs around phishing, malware, and other cyber risks. We continually evaluate the security environment surrounding the handling and control of our critical data and have instituted additional measures to help protect us from system intrusion or data breaches.

Our Board of Directors appointed the Audit Committee with direct oversight of our: (i) information security policies, including periodic assessment of risk of information security breach, training program, significant threat changes and vulnerabilities and monitoring metrics and (ii) effectiveness of information security policy implementation. Our Audit Committee is comprised entirely of independent directors, one of whom has significant work experience related to information security issues or oversight. Management reports information security instances to the Audit Committee as they occur, if material, and provides a summary multiple times per year to the Audit Committee.

Governmental Regulation

Our operations are subject to various regulations governing, among other things, emissions to air, discharge to waters, and the generation, handling, storage, transportation, treatment and disposal of waste and other materials. We believe that our businesses, operations and facilities have been and are being operated in compliance in all material respects with applicable environmental and health and safety laws and regulations, many of which provide for substantial fines and criminal sanctions for violations. Potentially significant expenditures, however, could be required in order to comply with evolving environmental and health and safety laws, regulations or requirements that may be adopted or imposed in the future.

Access to Public Information

We file annual, quarterly and current reports, proxy statements and other information with the SEC. Our SEC filings are available free of charge to the public over the Internet at the SEC’s website at www.sec.gov (http://www.sec.gov). In addition, our SEC filings and Code of Business Conduct and Ethics are available free of charge on our website www.motorcarparts.com (http://www.motorcarparts.com). The information contained on the websites referenced in this Form 10-K is not incorporated by reference into this filing. Further, our references to website URLs are intended to be inactive textual references only.

Risk factors

As filed, 48,239 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

While we believe the risk factors described below are all the material risks currently facing our business, additional risks we are not presently aware of or that we currently believe are immaterial may also impair our business operations. Our financial condition or results of operations could be materially and adversely impacted by these risks, and the trading price of our common stock could be adversely impacted by any of these risks. In assessing these risks, you should also refer to the other information included in or incorporated by reference into this Form 10-K, including our consolidated financial statements and related notes thereto appearing elsewhere or incorporated by reference in this Form 10-K.

Risks Related to Economic, Political and Health Conditions

Developments in global and local economic, political, and social conditions, such as international trade disputes, disruptions from rapid changes in trade policy and new or increased tariffs, a foreign or domestic debt crisis, currency volatility, natural disasters, war, such as the war in Ukraine and the conflict in Israel, Gaza and the surrounding areas, epidemics and pandemics, the fear of spread of contagious diseases and civil unrest, may have a material impact on our results of operations and financial condition, and the continuation of or worsening of such conditions could have a similar or worse impact.

A variety of economic, political, and social conditions have led to adverse impacts on the U.S. and global economies and created uncertainty regarding the potential effects of such conditions on our employees, supply chains, operations, and customer demand including international trade disputes, disruptions from rapid changes in trade policy and new or increased tariffs, a foreign or domestic debt crisis, currency volatility, natural disasters, war, such as the war in Ukraine and the conflict in Israel, Gaza and surrounding areas, epidemics and pandemics, the fear of spread of contagious diseases and civil unrest. Certain of these conditions may impact our operations and the operations of our customers, suppliers, and vendors in a number of ways, including but not limited to, the following:

significantly increased costs and uncertainty in future costs due to higher tariff rates charged on components and finished goods by the United States and by other countries, and uncertainty regarding future tariff rates due to rapidly evolving trade policy in the U.S. and the potential for retaliatory tariffs charged by other countries;

supply chain delays or stoppages due to shipping delays (cargo ship, train and truck shortages as well as staffing shortages) resulting in increased freight costs, closed supplier facilities or distribution centers, reduced workforces, scarcity of raw materials and scrutiny or embargoing of goods from some countries or areas;

change in demand for or availability of our products as a result of our customers modifying their restocking, fulfillment, or shipping practices;

increased raw material, and other input costs;

increased working capital needs and/or an increase in trade accounts receivable write-offs as a result of increased financial pressures on our suppliers or customers; and

fluctuations in foreign currency exchange rates or interest rates.

Unfavorable economic conditions may adversely affect our business.

Adverse changes in economic conditions, including inflation, slower economic growth and the potential for a recession, increased fuel prices, rapid changes in trade policy, new or increased tariffs, including retaliatory tariffs, global trade disruptions, unemployment levels, decreased availability of consumer credit, taxation or instability in the financial markets or credit markets may either lower demand for our products or increase our operational costs, or both. In addition, rapidly evolving federal, state and local government policies, the results of elections, and other changes in the political landscape could have similar effects, and responding to such changes in policy may divert the attention of senior management from our operations. Such conditions may also materially impact our customers, suppliers and other parties with whom we do business. Our revenue will be adversely affected if demand for our products declines, including if we are forced to make our products more expensive for customers as a result of increasing costs, including regulatory expenses such as tariffs, and our customers don’t agree to these increased costs. The impact of unfavorable economic conditions may also impair the ability of our customers to pay for products they have purchased. As a result, reserves for doubtful accounts and write-offs of accounts receivables may increase, and delay or failure to collect a significant portion of amounts due on those receivables could have a material adverse effect upon our business, results of operations, and financial condition. In addition, we also get pressure from our suppliers to pay them faster and our customers to pay us slower, which impacts our cash flows.

Risks Related to Our Business and Industry

We rely on a few customers for a majority of our business, and the loss of any of these customers, significant changes in the prices, marketing allowances or other important terms provided to any of these customers, or adverse developments with respect to the financial condition of these customers, could harm our operating results.

Our net sales are concentrated among a small number of our customers. Sales to our three largest customers in the aggregate represented 86%, and sales to our largest customer represented 39% of our net sales during fiscal 2025. We are under ongoing pressure from our major customers to offer lower prices, extend payment terms, increase marketing and other allowances and other terms more favorable to these customers because our sales to these customers are concentrated, and provide the market in which we operate is very competitive. Customer demands have put continued pressure on our operating margins and profitability, resulted in periodic contract renegotiation to provide more favorable prices and terms to these customers and significantly increased our working capital needs. The loss of or a significant decline in sales to any of these customers could adversely affect our business, results of operations, and financial condition. In addition, customer concentration leaves us vulnerable to any adverse change in the financial condition of these customers.

We regularly review our accounts receivable and allowance for credit losses by considering factors such as historical experience, credit quality and age of the accounts receivable, and the current economic conditions that may affect a customer’s ability to pay amounts owed to us. We participate in trade accounts receivable discount programs with our major customers. If the creditworthiness of any of our major customers was downgraded, we could be adversely affected as we may be subjected to higher interest rates on the use of these discount programs or we could be forced to wait longer for payment. In certain cases, we have experienced higher interest rates due to changes in customer credit profiles, which has impacted the overall cost of these financing arrangements. Should our customers experience significant cash flow problems, our financial position and results of operations could be materially and adversely affected, and our losses could include the outstanding receivable balance, Used Cores expected to be returned by customers, and the value of the Remanufactured Cores held at customers’ locations. We maintain an allowance for credit losses that, in our opinion, provides for an adequate reserve to cover losses that may be incurred. However, we cannot assure you that our losses will not exceed our reserve for the reasons and risks above. Changes in terms with, significant allowances for, and collections from these customers could affect our operating results and cash flows.

Failure to compete effectively could reduce our market share and significantly harm our financial performance.

Our industry is highly competitive, and our success depends on our ability to compete with suppliers of automotive aftermarket products, some of which may have substantially greater financial, marketing and other resources than we do. The automotive aftermarket industry is highly competitive, and our success depends on our ability to compete with domestic and international suppliers of automotive aftermarket products. Due to the diversity of our product offering, we compete with several large and medium-sized companies, including (i) Terrepower, First Brands and DRIV for hard parts, (ii) Burke Porter and Langdi Measurement Control for test solutions and diagnostic equipment, and (iii) a large number of smaller regional and specialty companies. We also face competition from original equipment manufacturers, which, through their automotive dealerships, supply many of the same types of replacement parts we sell. In addition, other overseas competitors, particularly those located in Asia, are increasing their operations and are becoming a significant competitive force.

Some of our competitors may have larger customer bases and significantly greater financial, technical and marketing resources than we do. In addition, some of our competitors may have a different manufacturing and distributing structure and footprint. These factors may allow our competitors to:

respond more quickly than we can to new or emerging technologies and changes in customer requirements by devoting greater resources than we can to the development, promotion and sale of automotive aftermarket products;

engage in more extensive research and development;

Absorb more regulatory, tax, and tariff costs than the Company; and

allocate more money and resources on marketing and promotion.

Increased competition could put additional pressure on us to reduce prices or take other actions, which may have an adverse effect on our operating results. We may also lose significant customers or lines of business to competitors.

If we do not respond appropriately, the evolution of the automotive industry could adversely affect our business.

Many leaders and consumers in the automotive industry are increasingly focused on the development of hybrid and electric vehicles and of advanced driver assistance technologies, with the goal of a commercially-viable, fully-automated driving experience. There has also been an increase in consumer preferences for mobility on demand services, such as car and ride sharing, as opposed to automobile ownership, which may result in a long-term reduction in the number of vehicles per capita. In addition, some industry participants are exploring transportation through alternatives to automobiles. These evolving areas have also attracted increased competition from entrants outside the traditional automotive industry. If we do not continue to innovate and develop, or acquire, new and compelling products that capitalize upon new technologies in response to consumer preferences, it could have a materially adverse impact on our business, results of operations, and financial condition. These changes may also reduce demand for our products for combustion engine vehicles.

Work stoppages, production shutdowns and similar events could significantly disrupt our business.

Because the automotive industry relies heavily on just-in-time delivery of components during the assembly and manufacture of vehicles, a work stoppage or production shutdown at one or more of our manufacturing and assembly facilities could have adverse effects on our business. Similarly, if one or more of our customers were to experience a work stoppage, that customer would likely halt or limit purchases of our products. In recent years, we have also experienced significant disruptions in the supply of several key components from Asia due to work stoppages, production shutdowns, government closures, and other supply chain issues at many of our suppliers, leading to an adverse effect on our financial results.

Interruptions or delays in obtaining component parts could impair our business and adversely affect our operating results.

In our remanufacturing processes, we obtain Used Cores, primarily through the core exchange programs with our customers, and component parts from third-party manufacturers. To supplement Used Cores received from our customers we purchase Used Cores from core brokers. Historically, the Used Core returned from customers together with purchases from core brokers have provided us with an adequate supply of Used Cores, but increases or uncertainty in tariff rates and global trade disruptions may cause a significant disruption in the supply of Used Cores, which may cause our operating activities to be materially and adversely impacted. Additionally, increased Used Core acquisitions by existing or new competitors or other changes could further disrupt the supply of Used Cores and increase the significance of such impacts. In addition, a number of the other components used in the remanufacturing process are available from a very limited number of suppliers. We are, as a result, vulnerable to any disruption in component supply and often are forced to purchase new units to obtain particularly difficult to get cores, and any meaningful disruption in this supply from uncertainty in tariff rates and global trade disruptions or other factors would materially and adversely impact our operating results. The imposition of tariffs, or even the potential imposition of tariffs are likely to cause a significant disruption in our manufacturing process, depending on the level and breadth of such tariff.

Increases in the market prices of key component raw materials could increase the cost of our products and negatively impact our profitability.

In addition to the continuous pressure on pricing which we have experienced from our largest customers, we also may not be able to recoup the higher costs of our products due to changes in the prices of raw materials, including, but not limited to, aluminum, copper, steel, and cardboard. We recover a substantial portion of our raw materials from Used Cores returned to us by our customers through the core exchange programs. To supplement Used Cores received from our customers, we purchase Used Cores from core brokers. Although this is not a primary source of Used Cores, it is a critical source for meeting our raw material demands. The higher prices of these Used Cores that we purchase could impact the cost of raw materials. Raw material price increases have had an impact on our product costs and profitability and continued increases will similarly adversely affect us.

Our financial results are affected by automotive parts failure rates that are outside of our control.

Our operating results are affected over the long term by automotive parts failure rates. These failure rates are impacted by a number of factors outside of our control, including the reliability and durability of vehicles, the installation of the part, the number of miles driven by consumers, and the average age of vehicles on the road. These trends could reduce the demand for our products and thus adversely affect our sales and profitability.

Our reliance on foreign suppliers for some of the automotive parts we sell to our customers or included in our products presents risks to our business.

A significant portion of automotive parts and components we use in our remanufacturing process are imported from suppliers located outside the U.S., including China and other countries in Asia. As a result, we are subject to various risks of doing business in foreign markets and importing products from abroad, such as the following, which we have experienced in the last fiscal year:

significant delays in the delivery of cargo due to port security and over-crowding considerations;

imposition of new and evolving duties, taxes, tariffs or other charges on imports;

financial or political instability in the countries in which our product is manufactured;

potential recalls or cancellations of orders for products that do not meet our quality standards;

disruption of imports by labor disputes or strikes and local business practices;

inability of our non-U.S. suppliers to obtain adequate credit or access liquidity to finance their operations; and

natural disasters, conflicts, disease epidemics and health related concerns, which could result in closed factories, reduced workforces, scarcity of raw materials and scrutiny or embargoing of goods.

We also face the following risks related to doing business in foreign markets and importing products from abroad:

imposition of new legislation relating to import quotas or other restrictions that may limit the quantity of our product that may be imported into the U.S. from countries or regions where we do business;

political or military conflict involving foreign countries or the U.S., which could cause a delay in the transportation of our products and an increase in transportation costs;

heightened terrorism security concerns, which could subject imported goods to additional, more frequent or more thorough inspections, leading to delays in deliveries or impoundment of goods for extended periods; and

our ability to enforce agreements with our foreign suppliers.

Any of the foregoing factors, or a combination of them, could increase the cost or reduce the supply of products available to us and materially and adversely impact our business, financial condition, results of operations or liquidity.

In addition, because we depend on independent third parties to manufacture a significant portion of our brake-related products, and other purchased finished goods, we cannot be certain that we will not experience operational difficulties with such manufacturers, such as reductions in the availability of production capacity, errors in complying with merchandise specifications, insufficient quality controls and failure to meet production deadlines or increases in manufacturing costs.

An increase in the cost or a disruption in the flow of our imported products may significantly decrease our sales and profits.

Merchandise manufactured offshore represents a significant portion of our total product purchases. Disruptions in the shipping or cost of such merchandise recently have and may continue to or may more significantly decrease our sales and profits. In addition, if imported merchandise continues to become more expensive or less available due to increased tariff rates, trade disputes or other unfavorable impacts, the transition to alternative sources may not occur in time to meet our demands. Merchandise from alternative sources may also be of lesser quality and more expensive than those we currently import. Risks associated with our reliance on imported merchandise include disruptions in the shipping and importation or increase in the costs of imported products. For example, common risks include:

increased sensitivity to changes in tariff rates;

raw material shortages;

problems with oceanic shipping, including shipping container shortages;

increased customs inspections of import shipments or other factors causing delays in shipments; and

increases in shipping rates, all of which we experienced.

As well as the following common risks, which we may experience in the future:

work stoppages;

strikes and political unrest;

economic crises;

international disputes and wars;

loss of “most favored nation” trading status by the U. S. in relations to a particular foreign country;

import duties; and

import quotas and other trade sanctions.

Products manufactured overseas and imported into the U.S. and other countries are subject to import restrictions and duties, which could delay their delivery or increase their cost. We are regularly in contact with customs officials from various countries and disagree from time to time on the amounts due. In addition, government agencies and self-regulatory organizations have the ability to conduct periodic examinations of and administrative proceedings regarding our business.

Our operating results may continue to fluctuate significantly.

We have experienced significant variations in our annual and quarterly results of operations. These fluctuations have resulted from many factors, including shifts in the demand and pricing for our products, general economic conditions, including changes in prevailing interest rates, wage inflation and multiple minimum wage increases in Mexico in the past and likely in the future, and the introduction of new products. Our gross profit percentage fluctuates due to numerous factors, some of which are outside of our control. These factors include the timing and level of marketing allowances provided to our customers, actual sales during the relevant period, pricing strategies, the mix of products sold during a reporting period, and general market and competitive conditions. We also incur allowances, accruals, charges and other expenses that differ from period to period based on changes in our business, which causes our operating income to fluctuate.

Changes in effective tax rates could adversely affect our results.

We are subject to income taxes in a variety of domestic and foreign jurisdictions. Our future income tax liability could be materially adversely affected by earnings that are lower than anticipated in jurisdictions where we have lower statutory rates, earnings that are higher than anticipated in jurisdictions where we have higher statutory rates, changes in the valuation of our deferred tax assets and liabilities, changes in the amount of our unrecognized tax benefits, or changes in tax laws, regulations, accounting principles, or interpretations thereof.

Tax laws and regulations continue to evolve. For example, ongoing tax reform discussions in the U.S. and other jurisdictions could further impact our tax liabilities. Proposals to modify corporate tax rates, implement new taxation mechanisms on foreign earnings, or change existing tax deductions and credits could materially affect our financial results. Given the political and economic uncertainty surrounding tax policy, we cannot predict the likelihood, form, or timing of such changes, but any unfavorable developments could have an adverse impact on our effective tax rate, income tax expense, and overall financial performance.

In addition, recent legislative changes in international tax initiatives, including the Organization for Economic Co-operation and Development (“OECD”)’s global minimum tax framework under Pillar Two, aim to establish a minimum corporate tax rate of 15% for large multinational enterprises. As countries implement these measures, our tax obligations could increase, and compliance requirements may become more complex. While we do not currently meet the minimum revenue threshold for Pillar Two and are not subject to its provisions, any future compliance could increase our tax obligations, impose additional compliance costs, and adversely affect our results of operations and financial condition.

Furthermore, changes in global tax laws may lead to increased tax costs or compliance burdens. The OECD’s Base Erosion and Profit Shifting (“BEPS”) initiatives and similar measures adopted by various jurisdictions may further contribute to tax uncertainty. As new regulations and interpretations emerge, our ability to mitigate risks associated with these changes may be limited, and our results of operations and financial condition could be adversely affected.

Natural disasters or other disruptions in our business in California, Baja California, Mexico, and Asia could increase our operating expenses or cause us to lose revenues.

A substantial portion of our operations are located in Southern California, Baja California, Mexico, and Asia, including our headquarters, remanufacturing and warehouse facilities. Any natural disaster, such as an earthquake, or other damage to our facilities from weather, fire or other events could cause us to lose inventory, delay delivery of orders to customers, incur additional repair-related expenses, disrupt our operations or otherwise harm our business. These events could also disrupt our information systems, which would harm our ability to manage our operations worldwide and compile and report financial information. As a result, we could incur additional expenses or liabilities or lose revenues, which could exceed any insurance coverage and would adversely affect our financial condition and results of operations.

Our failure to maintain effective internal control over financial reporting may affect our ability to accurately report our financial results and could materially and adversely affect the market price of our common stock.

Under the Sarbanes-Oxley Act, we must maintain effective disclosure controls and procedures and internal control over financial reporting, which requires significant resources and management oversight. Effective internal and disclosure controls are necessary for us to provide reliable financial reports and effectively prevent fraud and to operate successfully as a public company. If we cannot provide reliable financial reports or prevent fraud, our reputation and operating results would be harmed. We cannot assure you that our internal control over financial reporting will be effective in the future or that other material weakness will not be discovered in the future. Any failure to maintain effective controls or timely effect any necessary improvement of our internal and disclosure controls could harm operating results or cause us to fail to meet our reporting obligations, which could affect our ability to remain listed with the Nasdaq Global Select Market or subject us to adverse regulatory consequences. Ineffective internal and disclosure controls could also cause investors to lose confidence in our reported financial information, which would likely have a negative effect on the trading price of our stock.

Risks Related to Our Overseas Operations

Our offshore remanufacturing and logistic activities expose us to increased political and economic risks and place a greater burden on management to achieve quality standards.

Our international operations, especially our operations in Mexico, increase our exposure to political, criminal or economic instability in the host countries and to currency fluctuations. Risks are inherent in international operations, including:

exchange controls and currency restrictions;

currency fluctuations and devaluations;

changes in local economic conditions;

repatriation restrictions (including the imposition or increase of withholding and other taxes on remittances and other payments by foreign subsidiaries);

global sovereign uncertainty and hyperinflation;

uncertainty in laws and regulations relating to export and import restrictions;

exposure to government actions;

increased required employment related costs;

labor union activities, and

exposure to local political or social unrest including resultant acts of war, terrorism or similar events.

These and other factors may have a material adverse effect on our international activities and on our business, results of operations and financial condition. Our overall success as a business depends substantially upon our ability to manage our foreign operations. We may not continue to succeed in developing and implementing policies and strategies that are effective in each location where we do business, and failure to do so could materially and adversely impact our business, results of operations, and financial condition.

Unfavorable currency exchange rate fluctuations could adversely affect us.

We are exposed to market risk from material movements in foreign exchange rates between the U.S. dollar and the currencies of the foreign countries in which we operate. In fiscal 2025, approximately 29% of our total expenses were in currencies other than the U.S. dollar. As a result of our extensive operations in Mexico, our primary risk relates to changes in the rates between the U.S. dollar and the Mexican peso. To mitigate this currency risk, we enter into forward foreign exchange contracts to exchange U.S. dollars for Mexican pesos. We also enter into forward foreign exchange contracts to exchange U.S. dollars for Chinese yuan in order to mitigate risk related to our purchases and payments to our Chinese vendors. The extent to which we use forward foreign exchange contracts is periodically reviewed in light of our estimate of market conditions and the terms and length of anticipated requirements. The use of derivative financial instruments allows us to reduce our exposure to the risk that the eventual net cash outflow resulting from funding the expenses of the foreign operations will be materially affected by changes in the exchange rates. We do not engage in currency speculation or hold or issue financial instruments for trading purposes. These contracts generally expire in a year or less. Any change in the fair value of foreign exchange contracts is accounted for as an increase or decrease to foreign exchange impact of lease liabilities and forward contracts in the consolidated statements of operations. We recorded non-cash losses of $4,179,000, $1,373,000, and a non-cash gain of $2,776,000, due to the change in the fair value of the forward foreign currency exchange contracts during fiscal 2025, 2024, and 2023, respectively. In addition, we recorded a loss of $11,713,000, and gains of $5,187,000 and $6,515,000, in connection with the remeasurement of foreign currency-denominated lease liabilities during fiscal 2025, 2024, and 2023, respectively.

Changes in trade policy and other factors beyond our control could materially adversely affect our business.

We are affected by trade policy, including global tariffs, the North American Free Trade Agreement (“NAFTA”) and the World Trade Organization (the “WTO”). In December 2019, the United States, Mexico and Canada signed the amended United States-Mexico-Canada Agreement (the “USMCA”), which replaced NAFTA. In July 2020, the U.S. notified the United Nations of its intention to withdraw from the WTO. The U.S. government has recently indicated that it intends to negotiate changes to the USMCA in 2026 with the Mexican and Canadian governments. The effects of such negotiations and any changes to the USMCA may negatively impact our operations in Mexico and Canada and may significantly and materially increase our costs by increasing the cost of shipping products from our distribution center or remanufacturing facilities in Mexico and our subsidiaries in Canada. While the U.S. continues to be a member of the WTO, it remains difficult to predict what effect the USMCA, the WTO or other trade agreements and organizations will have on our business. If the U.S. were to withdraw from or materially modify any other international trade agreements to which it is a party or if the U.S. imposes significant additional tariffs on imports from China or other restrictions, it could have a materially adverse impact on our business, results of operations, and financial condition.

Tariffs imposed by the United States government could have a material adverse effect on our results of operations.

The U.S. government has recently placed increased tariffs on certain goods imported from China and other countries and may impose new tariffs on goods imported from China and other countries, including products that we import. In response, China and other countries have, and may again in the future, impose increased tariffs on a wide range of products imported from the U.S. and adjust the value of its currency. Further, the U.S. government has recently imposed new tariffs on additional countries, including Mexico and Canada from which we remanufacture and distribute products, and we have operations. While such tariffs on Mexico and Canada were paused in connection with an agreement to renegotiate the USMCA, similar tariffs could significantly increase the cost of the products that we import and may materially impact our cost of goods and business.

If renegotiations related to existing or threatened tariffs are unsuccessful or additional tariffs or trade restrictions are implemented by the U.S. or other countries in connection with a global trade war, the resulting escalation of trade tensions could have a material adverse effect on world trade and the global economy. Even in the absence of further tariffs or trade restrictions, the related uncertainty and the market's fear of an economic slowdown could lead to a decrease in consumer spending, and we may experience lower net sales than expected. Reduced net sales may result in reduced operating cash flows if we are not able to appropriately manage inventory levels or leverage expenses.

Risks Related to Our Indebtedness

Our debt can impact our operating results and cash flows and limit our operations.

As of March 31, 2025, we had $90,787,000 of debt outstanding under our credit facility, which is at variable interest rates. Fluctuations in those rates could impact our operating results and cash flows. The weighted average interest on our debt was 7.46% at March 31, 2025 compared to 8.43% at March 31, 2024. In addition, our credit facility has restrictions that could limit aspects of our operations.

In addition, on March 31, 2023, we issued and sold $32,000,000 in aggregate principal amount of 10.0% convertible notes due in 2029 (the “Convertible Notes”). The issuance of shares of our common stock upon conversion of the Convertible Notes may dilute the ownership interests of existing stockholders and reduce our per share results of operations. Any sales in the public market of our common stock issuable upon such conversion could adversely affect prevailing market prices of our common stock.

We may also incur additional debt in the future, which could further increase our leverage, reduce our cash flow or further restrict our business.

Our lenders may not waive future defaults under our credit agreements.

Our credit agreement with our lenders contains certain financial and other covenants. If we fail to meet any of these covenants in the future, there is no assurance that our lenders will waive any such defaults or that we will otherwise be able to cure them. If we obtained a waiver, it may impose significant costs or covenants on us. In addition, as the capital markets get more volatile, it may become more difficult to obtain such waivers or refinance our debt.

Weakness in conditions in the global credit markets and macroeconomic factors, including interest rates, could adversely affect our financial condition and results of operations.

The banking industry and global credit markets also experience difficulties from time to time, and issues involving our lenders could impact our deposits, the availability, terms and cost of borrowings or our ability to refinance our debt. Any weakness in the credit markets could result in significant constraints on liquidity and availability of borrowing terms from lenders and accounts payable terms with vendors. These issues could also result in more stringent lending standards and terms and higher interest rates. In addition, we are exposed to changes in interest rates primarily as a result of our borrowing and receivable discount programs, which have interest costs that vary with interest rate movements. Any limitations on our ability to fund our operations could have a material adverse effect on our business, financial condition and ability to grow.

Risks Related to Owning Our Stock

Our stock price is volatile and could decline substantially.

Our stock price has fluctuated in the past and may decline substantially in the future as a result of developments in our business, the volatile nature of the stock market, and other factors beyond our control. Our stock price and the stock market generally has, from time to time, experienced extreme price and volume fluctuations. Many factors may cause the market price for our common stock to decline, including: (i) our operating results failing to meet the expectations of securities analysts or investors in any period, (ii) downward revisions in securities analysts’ estimates, (iii) market perceptions concerning our future earnings prospects, (iv) public or private sales of a substantial number of shares of our common stock, (v) adverse changes in general market conditions or economic trends, and (vi) market shocks generally or in our industry. Our stock price is also affected by volume, which impacts the ability of investors to buy or sell our stock.

General Risk Factors

We have made and may continue to make strategic acquisitions of other companies and businesses, and these acquisitions have and may continue to introduce significant risks and uncertainties, including risks related to integrating the acquired businesses and achieving benefits from the acquisitions.

In order to position ourselves to take advantage of growth opportunities, we have made, and may continue to make, strategic acquisitions that involve significant risks and uncertainties. These risks and uncertainties include:

the difficulty in integrating newly-acquired businesses and operations in an efficient and effective manner;

the challenges in achieving strategic objectives, cost savings and other benefits from acquisitions;

the potential loss of key employees of the acquired businesses;

the risk of diverting the attention of senior management from our operations;

risks associated with integrating financial reporting and internal control systems;

difficulties in expanding information technology systems and other business processes to accommodate the acquired businesses; and

future impairments of any goodwill of an acquired business.

We may also incur significant expenses to pursue and consummate acquisitions. Any of the foregoing, or a combination of them, could cause us to incur additional expenses and materially and adversely impact our business, financial condition, results of operations or liquidity.

Increased attention to environmental, social, and governance matters may impact our business, financial results, or stock price.

In recent years, investors and other stakeholders have often focused on corporate activities related to environmental, social, and governance (“ESG”) matters in public discourse. A number of advocacy groups, both domestically and internationally, have campaigned for governmental and private action to promote change at public companies related to ESG matters, including through the investment and voting practices of investment advisers, public pension funds, universities, and other members of the investing community. As they evaluate investment decisions, many investors and customers, look not only at company disclosures but also to ESG rating systems that have been developed by third parties to allow ESG comparisons among companies. Although we participate in a number of these ratings systems, we do not participate in all such systems. The criteria used in these ratings systems may conflict and change frequently, and we cannot predict how these third parties will score us, nor can we have any assurance that they score us accurately or other companies accurately or that other companies have provided them with accurate data. We supplement our participation in ratings systems with published disclosures of our ESG activities, but some investors and other stakeholders may desire other disclosures that we do not provide. We also incur significant costs in complying with reporting obligations and could incur liability if a regulator or other third party disagrees with our statements.

In addition, some of the domestic and foreign jurisdictions in which we operate could mandate additional ESG disclosure and impose additional requirements on us. For example, in October 2023, California passed two bills that require certain companies that do business in California to disclose their GHG emissions and climate-related financial risks starting in 2026. A failure to comply with investor or other stakeholder expectations and standards, which are evolving, or if we are perceived to not have responded appropriately to the growing concern for ESG issues, regardless of whether there is a legal requirement to do so, could also cause reputational harm to our business and could cause certain investors to be unwilling to invest in our stock, which could adversely impact our ability to raise capital and could have other material adverse effects on us.

Regulations related to conflict minerals could adversely impact our business.

The Dodd-Frank Wall Street Reform and Consumer Protection Act (“Dodd-Frank”) contains provisions to improve transparency and accountability concerning the supply of certain minerals, known as “conflict minerals”, originating from the Democratic Republic of Congo (“DRC”) and adjoining countries. These rules could adversely affect the sourcing, supply, and pricing of materials used in our products, as the number of suppliers who provide conflict-free minerals may be limited. We may also suffer reputational harm if we determine that certain of our products contain minerals not determined to be conflict-free or if we are unable to modify our products to avoid the use of such materials. We may also face challenges in satisfying customers who may require that our products be certified as containing conflict-free minerals.

The products we manufacture or contract to manufacture contain small quantities of Tin and Gold. We manufacture or contract to manufacture one product with small quantities of Tantalum. For the reporting year ending December 31, 2024, we surveyed 204 smelters or refiners for these minerals that are, or could be, in our supply chain. Of these, 94% were validated as Compliant or Conformant as conflict-free, per publicly available information on the Conflict Free Sourcing Initiative website. We have not been able to ascertain the conflict-free status of the remaining smelters or refiners.

Our strategy for managing risks associated with conflict minerals in products includes continuing to encourage our suppliers to engage in conflict-free sourcing and obtaining data from our suppliers that is more applicable to the products we purchase. We continue to monitor progress on industry efforts to ascertain whether some facilities that suppliers identified are actually smelters. We do not believe conflict minerals pose risk to our operations. We are a member of the Automobile Industry Action Group (AIAG) and support their efforts in the conflict minerals area.

If our technology and telecommunications systems were to fail, or we were not able to successfully anticipate, invest in or adopt technological advances in our industry, it could have an adverse effect on our operations.

We rely on computer and telecommunications systems to communicate with our customers and vendors and manage our business. The temporary or permanent loss of our computer and telecommunications equipment and software systems, through casualty, operating malfunction, software virus or service provider failure, could disrupt our operations. In addition, our future growth may require additional investment in our systems to keep up with technological advances in our industry. If we are not able to invest in or adopt changes to our systems, or such upgrades take longer or cost more than anticipated, our business, financial condition and operating results may be adversely affected.

We use artificial intelligence technologies in our business, and the use of these technologies involve technological and legal risk.

We currently use artificial intelligence (“AI”) and automated decision-making technologies (collectively, “AI Technologies”) in certain internal business practices. Technological advances in AI are rapidly evolving, and along with this rapid evolution comes risks and challenges that could negatively impact our business. AI Technologies may create incomplete, inaccurate, or misleading outputs or other discriminatory or unexpected results or behaviors, such as hallucinatory behavior that can generate irrelevant, nonsensical, or factually incorrect results. While we take measures designed to ensure the accuracy of such AI-generated content, those measures may not always be successful. Accordingly, reliance on these models could lead us to make impaired decisions that could result in adverse consequences to us, including legal liability, reputational and competitive harm, and loss of customers. Additionally, sensitive or otherwise confidential information could be leaked, disclosed, or revealed in connection with the use of AI Technologies by our employees, vendors, contractors, and where an AI model processes personal information and makes connections with that data, it may disclose sensitive, proprietary, or confidential information generated by the model.

Cyber-attacks or other breaches of information technology security could adversely impact our business and operations.

The incidence of cyber-attacks and other breaches of information technology security have increased worldwide. Cyber-attacks or other breaches of network or information technology security may cause equipment failure or disruption to our operations. We may face such attacks through use of malware, computer viruses, attachments to e-mails and other means for disruption or unauthorized access. The risk of a cybersecurity attack, including by computer hackers (individual or hacking organizations), foreign governments, and cyber terrorists, has generally increased as the number, intensity, and sophistication of attempted attacks and intrusions from around the world have increased. The techniques and sophistication used to conduct cyber-attacks and breaches of IT systems, as well as the sources and targets of these attacks, change frequently and are often not recognized until such attacks are launched or have been in place for a period of time.

We have been impacted by security incidents in the past and will likely continue to experience security incidents of varying degrees. The preventive actions we take to reduce the risk of cyber incidents and protect our information technology and networks may be insufficient to repel a major cyber-attack in the future. As cyber-attacks continue to evolve, we may be required to expend significant additional resources to continue to modify or enhance our protective measures or to investigate and remediate any information security vulnerabilities. In addition, our remediation efforts may not be successful. To the extent that any disruption or security breach results in a loss or damage to our data or unauthorized disclosure of confidential information, it could cause significant damage to our reputation, affect our relationship with our customers, suppliers and employees, and lead to claims against us and ultimately harm our business. Additionally, we may be required to incur significant costs to protect against damage caused by these disruptions or security breaches in the future including if such security breaches result in a violation of applicable federal and state privacy and other laws, or subject us to private consumer, business partner, or securities litigation and governmental investigations and proceedings, any of which could result in our exposure to material civil or criminal liability. While we maintain specific cyber insurance coverage, which may apply in the event of various breach scenarios, the amount of coverage may not be adequate in any particular case. Furthermore, because cyber threat scenarios are inherently difficult to predict and can take many forms, some breaches may not be covered under our cyber insurance coverage.

Cybersecurity

As filed, 6,496 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Material Effects of Cybersecurity Incidents

Risks from cybersecurity threats, including as a result of any previous cybersecurity incidents, have not materially affected us, including our business strategy, results of operations, or financial condition. Further information regarding cybersecurity risks can be found in Item 1A. Risk Factors - risks relating to “cyber-attacks or other breaches of information technology security could adversely impact our business and operations”.

Cybersecurity Risk Management and Strategy

We have developed and implemented a cybersecurity program designed to provide structured and thorough cybersecurity risk management and governance. Our cybersecurity program prioritizes, among other things, prevention of unauthorized access; protection of sensitive information; detection, assessment, and response to cyber threats; and continuous improvement of our cybersecurity measures. We seek to achieve our cybersecurity program priorities through a multi-pronged approach to address cyber threats and incidents that includes (i) implementation of various industry best practices, (ii) proactive monitoring of our IT systems, (iii) ongoing employee training, (iv) quarterly phishing campaigns, (v) continued education for our cybersecurity team, and (vi) regular risk assessments. We also maintain cyber insurance coverage to help mitigate a portion of the potential costs in the event of covered events.

Our cybersecurity program is aligned with various frameworks for managing cybersecurity risks, such as the National Institute of Standards and Technology Cybersecurity Framework for IT. We have an Information Technology Steering Committee that oversees the IT function, material projects, budgeting, and cybersecurity. In addition, we have an Incident Response Team, as highlighted in our cybersecurity policy to respond to any information security risks or incidents. These committees report directly to the Audit Committee of the Board of Directors, which is responsible for overall oversight of the Company’s cybersecurity program.

We rely upon both internal and external resources for evaluating and enhancing our cyber posture. Our information security team works with external cybersecurity firms to review and provide feedback on improving our cybersecurity program, including in the areas of data protection, threat and vulnerability management, and end-point protection. We require annual cybersecurity training by our employees, send out regular tips and memos to help our employees recognize phishing emails and other social engineering tactics, and provide various methods for employees to report suspicious activity that may give rise to a cyber-incident or threat. Significant results of such testing and reviews are communicated to our executive management team and our Audit Committee, as applicable, and are utilized in our cybersecurity program’s continuous improvement process.

In response to the growing risks associated with third-party service providers, we do not have any direct connections between our enterprise resource planning (“ERP”) system and our third-party suppliers nor service providers as their access to our IT systems could significantly disrupt our operations.

We maintain a set of core practices and procedures when responding to certain high-risk information security threats and incidents, which are designed to ensure appropriate resources are utilized to provide an effective, timely, and coordinated response in managing crises, including significant cyber threats and incidents. Our Management Risk Committee will assume overall responsibility in an effort to ensure that the appropriate functions and work streams are mobilized and coordinated to effectively manage any significant cyber events.

We have been a target of cyber-attacks and other hacking activities, as have certain of our third-party service providers. While our cybersecurity program is designed to prevent unauthorized access and protect sensitive information, including through continuous improvement of our cybersecurity measures, and we have not experienced any material cyber threats or incidents to date, we can give no assurance that we will be able to prevent, identify, respond to, or mitigate the impact of all cyber threats or incidents. To the extent future cyber threats or incidents result in significant disruptions and costs to our operations, reduce the effectiveness of our internal controls over financial reporting, result in intellectual property theft, fraud, extortion, harm to our employees or customers, violations of privacy laws or damage our reputation or otherwise substantially impact our business, it could have a material adverse impact on our business, results of operations, and financial condition. For additional discussion on our cybersecurity risks, refer to Item 1A. “Risk Factors” of this Form 10-K.

Cybersecurity Governance

Our Board of Directors oversees the management of risks inherent in the operation of our business, with a focus on the most significant risks that we face, including those related to cybersecurity. Our Board of Directors has delegated oversight of cybersecurity, including privacy and information security, as well as enterprise risk management to the Audit Committee. In connection with that oversight responsibility, our VP of IT and General Counsel meet with the Audit Committee on a quarterly basis to provide information and updates on a range of cybersecurity topics which may include our cybersecurity program and governance processes; cyber risk monitoring and management; the status of projects to strengthen our cybersecurity and privacy capabilities; recent significant incidents or threats impacting our operations, industry, or third-party suppliers; and the emerging threat landscape.

Our cybersecurity team is managed by a dedicated information security team, led by our VP of IT. Our VP of IT has more than 25 years of information technology experience across various disciplines, including nearly 15 years of experience in the financial, re-manufacturing, and distribution industries. She has led our global information security organization for almost three years. In addition to her employment experience in the cybersecurity field, our VP of IT has a Bachelor’s of Business Administration and Computer Information Systems, and meets regularly with other members of our executive team to provide relevant updates on our cybersecurity program.

Properties

As filed, 1,334 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

The following sets forth the location, type of facility, square footage and ownership interest in each of our material facilities:

Location Type of Facility Approx. Square Feet Leased or Owned Expiration
Torrance, CA Remanufacturing, Warehouse, Administrative, and Office 231,000 Leased March 2032
Tijuana, Mexico Remanufacturing, Warehouse, and Office 312,000 Leased August 2033
Tijuana, Mexico Distribution Center and Office 410,000 Leased December 2032
Tijuana, Mexico Remanufacturing, Warehouse, and Office 199,000 Leased December 2032
Tijuana, Mexico Core Induction, Warehouse, and Office 173,000 Leased December 2032
Tijuana, Mexico Warehouse 68,000 Leased June 2026
Malaysia Remanufacturing, Warehouse, and Office 136,000 Leased Various through September 2032
Singapore Warehouse and Office 18,000 Leased December 2027
Shanghai, China Warehouse and Office 27,000 Leased March 2027
Ontario, Canada Remanufacturing, Warehouse, and Office 157,000 Leased May 2026
Ontario, Canada Manufacturing, Warehouse, and Office 35,000 Leased December 2027

We believe the above mentioned facilities are sufficient to satisfy our current and foreseeable operations.

As filed, 394 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

We are subject to various lawsuits and claims. In addition, government agencies and self-regulatory organizations have the ability to conduct periodic examinations of and administrative proceedings regarding our business, and our compliance with law, code, and regulations related to all matters including but not limited to environmental, information security, taxes, levies, tariffs and such.

Management's discussion and analysis

As filed, 73,187 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

The following discussion contains forward-looking statements, including, without limitation, our expectations and statements regarding our outlook and future revenues, expenses, results of operations, liquidity, plans, strategies and objectives of management and any assumptions underlying any of the foregoing. Our actual results may differ significantly from those projected in the forward-looking statements. Our forward-looking statements and factors that might cause future actual results to differ materially from our recent results or those projected in the forward-looking statements include, but are not limited to, those discussed in the section titled “Cautionary Note Regarding Forward-Looking Statements” and “Risk Factors” of this Annual Report on Form 10-K. Except as required by law, we assume no obligation to update the forward-looking statements or our risk factors for any reason.

Management Overview

With a scalable infrastructure and abundant growth opportunities, we are focused on growing our aftermarket business in the North American marketplace and growing our leadership position in the test solutions and diagnostic equipment market by providing innovative and intuitive solutions to our customers. Our on-going investments in global infrastructure and human resources reflects the significant expansion of manufacturing capacity to support multiple product lines. These investments included (i) a 410,000 square foot distribution center, (ii) two buildings totaling 372,000 square feet for remanufacturing and core sorting of brake calipers, and (iii) the realignment of production at our original 312,000 square foot facility in Mexico. In addition, during fiscal 2025, we added a new warehousing and distribution facility in Malaysia to support our future direct shipment programs.

During fiscal 2025, we ceased manufacturing at our Torrance, California facility, reduced our headcount, and incurred certain transition expenses in connection with our on-going strategy to utilize our global footprint to enhance operating efficiencies and expect to realize future benefit from these cost-saving measures.

Highlights and Accomplishments in Fiscal 2025

During fiscal 2025, we continued to focus on strategic growth, improving profitability, and leveraging our industry position as a leading non-discretionary aftermarket parts supplier and customer relationships. The following significant accomplishments support our optimism:

Sales increased by 5.5 percent to a record $757.4 million, despite industry softness in the fiscal year;

Gross profit increased 16.1 percent to a record $153.8 million;

Gross margin increased 1.8 percentage points to 20.3 percent;

We generated cash from operating activities of approximately $45.5 million;

Our net bank debt was reduced by $32.7 million to $81.4 million;

We completed the relocation of certain operations to lower-cost locations as part of our ongoing commitment to continuous improvement;

Market share for brake-related product lines increased for both our branded Quality-Built® and private label retail brake products;

Expanded brand equity by increasing sales under the MPA portfolio of brands, including Quality-Built® in the professional installer market;

We expanded our product coverage for starters and alternators, brake calipers, brake pads, brake rotors, brake boosters, brake master cylinders, and wheel hubs with more than 629 new part numbers -- covering more than approximately 130 million vehicles in operation in North America;

Sales growth related to our emerging Mexican market presence continued to accelerate, driven by additional business from current customers;

The roll out of our JBT-1 bench-top testers continued to gain momentum, with the majority of retail stores in North America deploying our diagnostic units, or, we believe, planning to install them;

We added a new warehousing and distribution facility in Malaysia for future direct shipment programs;

We repurchased an aggregate 542,134 shares for $4.8 million for the full year under a current authorization program.

Our strategy for neutralization of working capital is gaining momentum supported by inventory management and supply chain initiatives, including the benefits of our vendor supply chain financing program; and

We made continued progress on further enhancing our Environmental, Social and Governance practices on a global basis.

Trends Affecting Our Business

Our business is impacted by various factors within the economy that affect both our customers and our industry, including but not limited to foreign currency, evolving tariff policy, inflation, interest rates, and other economic conditions. Given the nature of these various factors, we cannot predict whether or for how long certain trends will continue, nor can we predict to what degree these trends will impact us in the future.

Foreign Currency

We are exposed to foreign currency exchange risks inherent in our purchases and expenses denominated in currencies other than the U.S. dollar. We transact business in the following foreign currencies: Mexican pesos, Malaysian ringgit, Singapore dollar, Chinese yuan, Indian rupee, and the Canadian dollar. Our primary currency risks result from fluctuations in the value of the Mexican peso and to a lesser extent, the Chinese yuan. To mitigate these risks, we enter into forward foreign currency exchange contracts to exchange U.S. dollars for these foreign currencies.

We have operations located outside the United States with various functional currencies. Because our consolidated financial statements are denominated in U.S. dollars, the assets, liabilities, net sales, and expenses that are denominated in currencies other than the U.S. dollar must be converted into U.S. dollars using exchange rates for the current period. As a result, fluctuations in foreign currency exchange rates may impact our financial results.

Tariffs

We source the majority of our raw materials and parts from suppliers in a variety of non-U.S. countries. The current U.S. government recently implemented tariffs and announced the possibility of increasing current tariffs or implementing additional ones. We expect these actions and retaliatory tariff adjustments by other countries to impact our business and contribute to inflationary cost increases. As a result, we are taking actions designed to mitigate the potential impacts of these tariffs, including, but not limited to, passing along price increases to our customers and negotiating cost concessions from our suppliers where possible. Absent any changes in trade regulations, we anticipate inflationary cost increases due to these tariffs and any resulting impact on macroeconomic conditions and our business to continue. There can be no assurance that the recently announced tariffs or future imposition of any tariffs, changes thereto, or actions taken by countries in response to the tariffs will not have a material adverse effect on our business, results of operations, financial condition, or liquidity in any period or that any actions we take to mitigate the impact of the tariffs will be effective.

Inflation

The cost to manufacture and distribute our products is impacted by the cost of raw materials, finished goods, labor, and transportation. During fiscal 2025, we continued to experience increased costs of raw materials, finished goods, higher labor costs in Mexico, and other administrative costs. We can only pass our increased costs onto customers on a limited basis. Future general price inflation and its impact on costs and availability of materials could adversely affect our financial results.

Interest Rates

Interest rates in the U.S. remain high as a result of the federal government’s efforts to curb on-going inflation. Although interest rates decreased slightly during fiscal 2025, overall, interest costs for our accounts receivable discount programs and borrowings under our credit facility, which have interest costs that vary with interest rate movements, remain high. The majority of our interest costs result from our accounts receivable discount programs, which had a weighted average discount rate of 6.2% for fiscal 2025 compared with 6.8% for fiscal 2024. The weighted average interest on borrowings under our credit facility was 7.46% at March 31, 2025 compared to 8.43% at March 31, 2024. Any future increases in interest rates will continue to adversely impact our financial results.

Segment Reporting

Our three operating segments are as follows:

Hard Parts, which includes (i) light duty rotating electric products such as alternators and starters, (ii) wheel hub products, (iii) brake-related products, including brake calipers, brake boosters, brake rotors, brake pads and brake master cylinders, and (iv) turbochargers,

Test Solutions and Diagnostic Equipment, which includes (i) applications for combustion engine vehicles, including bench-top testers for alternators and starters, (ii) equipment for the pre- and post-production of electric vehicles, and (iii) software emulation of power system applications for the electrification of all forms of transportation (including automobiles, trucks, the emerging electrification of systems within the aerospace industry, and electric vehicle charging stations), and

Heavy Duty, which includes non-discretionary automotive aftermarket replacement hard parts for heavy-duty truck, industrial, marine, and agricultural applications.

Our Hard Parts operating segment meets the criteria of a reportable segment. The Test Solutions and Diagnostic Equipment and Heavy Duty segments are not material, and are not required to be separately reported. See Note 20 of the notes to consolidated financial statements for more information.

Critical Accounting Policies

We prepare our consolidated financial statements in accordance with generally accepted accounting principles, or GAAP, in the United States. Our significant accounting policies are discussed in detail below and in Note 2 of the notes to consolidated financial statements.

In preparing our consolidated financial statements, we use estimates and assumptions for matters that are inherently uncertain. We base our estimates on historical experiences and reasonable assumptions. Our use of estimates and assumptions affect the reported amounts of assets, liabilities and the amount and timing of revenues and expenses we recognize for and during the reporting period. We are not currently aware of any specific event or circumstance that would require an update to our estimates or judgments or a revision of the carrying value of our assets or liabilities as of March 31, 2025. However, these estimates may change, as new events occur and additional information is obtained. Actual results could differ materially from these estimates under different assumptions or conditions.

Our remanufacturing operations include core exchange programs for the core portion of the finished goods. The Used Cores that we acquire and are returned to us from our customers are a necessary raw material for remanufacturing. We also offer our customers marketing and other allowances that impact revenue recognition. These elements of our business give rise to more complex accounting than many businesses our size or larger.

Recently Adopted Accounting Pronouncements

Reportable Segment Disclosures

In November 2023, the FASB issued ASU 2023-07, Improvements to Reportable Segment Disclosures (Topic 280). This standard requires us to disclose significant segment expenses that are regularly provided to the chief operating decision maker (“CODM”) and are included within each reported measure of segment operating results. The standard also requires us to disclose the total amount of any other items included in segment operating results, which were not deemed to be significant expenses for separate disclosure, along with a qualitative description of the composition of these other items. In addition, the standard also requires disclosure of the CODM’s title and position, as well as detail on how the CODM uses the reported measure of segment operating results to evaluate segment performance and allocate resources. The standard also aligns interim segment reporting disclosure requirements with annual segment reporting disclosure requirements. This guidance is effective for fiscal years beginning after December 15, 2023, and interim periods within fiscal years beginning after December 15, 2024. The adoption of this guidance as of March 31, 2025 increased our disclosures (see Note 20 of the notes to consolidated financial statements) but did not have any material effect on our consolidated financial statements.

Accounting Pronouncements Not Yet Adopted

Disclosure Improvements

In October 2023, the FASB issued ASU 2023-06, Disclosure Improvements: Codification Amendments in Response to the SEC’s Disclosure Update and Simplification Initiative. This standard was issued in response to the SEC’s disclosure update and simplification initiative, which affects a variety of topics within the Accounting Standards Codification. The amendments apply to all reporting entities within the scope of the affected Topics unless otherwise indicated. The effective date for each amendment will be the date on which the SEC’s removal of that related disclosure from Regulation S-X or Regulation S-K becomes effective, with early adoption prohibited. We are currently evaluating the impact this guidance will have on our financial statement disclosures.

Improvements to Income Tax Disclosures

In December 2023, the FASB issued ASU 2023-09, Improvements to Income Tax Disclosures (Topic 740). This standard requires us to provide further disaggregated income tax disclosures for specific categories on the effective tax rate reconciliation, as well as additional information about federal, state/local and foreign income taxes. The standard also requires us to annually disclose our income taxes paid (net of refunds received), disaggregated by jurisdiction. This guidance is effective for fiscal years beginning after December 15, 2024, with early adoption permitted. The standard is to be applied prospective basis, although optional retrospective application is permitted. We are currently evaluating the impact this guidance will have on our financial statement disclosures.

Disaggregation of Income Statement Expenses

In November 2024, the FASB issued ASU 2024-03, Disaggregation of Income Statement Expenses (“DISE”) (Subtopic 220-40). This standard requires us to disclose, in the footnotes at each interim and annual reporting period, information about expenses by the nature of the expense in addition to certain disclosures about selling expenses. Entities are required to include the following relevant expense captions: (i) purchase of inventory, (ii) employee compensation, (iii) depreciation, (iv) intangible asset amortization, and (v) depreciation, depletion and amortization recognized as part of oil and gas producing activities. In January 2025, the FASB issued ASU No. 2025-01, Income Statement - Reporting Comprehensive Income - Expense Disaggregation Disclosures (Subtopic 220-40) Clarifying the Effective Date, which is intended to clarify the effective date of ASU No. 2024-03. As clarified in ASU 2025-01, the new guidance is effective for annual reporting periods beginning after December 15, 2026, and interim reporting periods within annual reporting periods beginning after December 15, 2027. Early adoption is permitted. We are currently evaluating the impact this guidance will have on our financial statement disclosures.

Debt with Conversion and Other Options

In November 2024, the FASB issued ASU 2024-04, Debt with Conversion and Other Options (Subtopic 470-20): Induced Conversions of Convertible Debt Instruments, which seeks to clarify the requirements for determining whether certain settlements of convertible debt instruments should be accounted for as an induced conversion. This guidance is effective for annual periods beginning after December 15, 2025, including interim periods within those fiscal years. Early adoption is permitted. We are currently evaluating the impact this guidance will have on our consolidated financial statements and disclosures.

Inventory

Inventory is comprised of: (i) Used Core and component raw materials, (ii) work-in-process, and (iii) remanufactured and purchased finished goods.

Used Core, component raw materials, and purchased finished goods are stated at the lower of average cost or net realizable value.

Work-in-process is in various stages of production and is valued at the average cost of Used Cores and component raw materials issued to work orders still open, including allocations of labor and overhead costs. Historically, work-in-process inventory has not been material compared to the total inventory balance.

Remanufactured finished goods include: (i) the Used Core cost and (ii) the cost of component raw materials, and allocations of labor and variable and fixed overhead costs (the “Unit Cost”). The allocations of labor and variable and fixed overhead costs are based on the actual use of the production facilities over the prior 12 months which approximates normal capacity. This method prevents the distortion in allocated labor and overhead costs that would occur during short periods of abnormally low or high production. In addition, we exclude certain unallocated overhead such as severance costs, duplicative facility overhead costs, start-up costs, training, and spoilage from the calculation and expense these unallocated overhead costs as period costs. Purchased finished goods also include an allocation of fixed overhead costs.

The estimate of net realizable value is subjective and based on our judgment and knowledge of current industry demand and management’s projections of industry demand. The estimates may, therefore, be revised if there are changes in the overall market for our products or market changes that in our judgment impact our ability to sell or liquidate potentially excess or obsolete inventory. Net realizable value is determined at least quarterly as follows:

Net realizable value for finished goods by customer, by product line are determined based on the agreed upon selling price with the customer for a product in the trailing 12 months. We compare the average selling price, including any discounts and allowances, to the finished goods cost of on-hand inventory, less any reserve for excess and obsolete inventory. Any reduction of value is recorded as cost of goods sold in the period in which the revaluation is identified.

Net realizable value for Used Cores are determined based on current core purchase prices from core brokers to the extent that core purchases in the trailing 12 months are significant. Remanufacturing consumes, on average, more than one Used Core for each remanufactured unit produced since not all Used Cores are reusable. The yield rates depend upon both the product and customer specifications. We purchase Used Cores from core brokers to supplement our yield rates and Used Cores not returned under the core exchange programs. We also consider the net selling price our customers have agreed to pay for Used Cores that are not returned under our core exchange programs to assess whether Used Core cost exceeds Used Core net realizable value on a by customer, by product line basis. Any reduction of core cost is recorded as cost of goods sold in the period in which the revaluation is identified.

We record an allowance for potentially excess and obsolete inventory based upon recent sales history, the quantity of inventory on-hand, and a forecast of potential use of the inventory. We periodically review inventory to identify excess quantities and part numbers that are experiencing a reduction in demand. Any part numbers with quantities identified during this process are reserved for at rates based upon our judgment, historical rates, and consideration of possible scrap and liquidation values which may be as high as 100% of cost if no liquidation market exists for the part. As a result of this process, we recorded reserves for excess and obsolete inventory of $18,964,000 and $17,372,000 at March 31, 2025 and 2024, respectively. This increase in the reserve was primarily due to excess inventory of certain finished goods on hand at March 31, 2025 compared with March 31, 2024.

We record vendor discounts as a reduction of inventories and are recognized as a reduction to cost of sales as the inventories are sold.

Inventory Unreturned

Inventory unreturned represents our estimate, based on historical data and prospective information provided directly by the customer, of finished goods shipped to customers that we expect to be returned, under our general right of return policy, after the balance sheet date. Inventory unreturned includes only the Unit Cost of a finished goods. The return rate is calculated based on expected returns within the normal operating cycle, which is generally one year. As such, the related amounts are classified in current assets. Inventory unreturned is valued in the same manner as our finished goods inventory.

Contract Assets

Contract assets consists of: (i) the core portion of the finished goods shipped to customers, (ii) upfront payments to customers in connection with customer contracts, (iii) core premiums paid to customers, (iv) finished goods premiums paid to customers, and (v) long-term core inventory deposits.

Remanufactured Cores held at customers’ locations as a part of the finished goods sold to the customer are classified as long-term contract assets. These assets are valued at the lower of cost or net realizable value of Used Cores on hand (see Inventory above). For these Remanufactured Cores, we expect the finished good containing the Remanufactured Core to be returned under our general right of return policy or a similar Used Core to be returned to us by the customer, under our core exchange programs, in each case for credit. Remanufactured Cores and Used Cores returned by consumers to our customers but not yet returned to us are classified as “Cores expected to be returned by customers”, which are included in short-term contract assets until we physically receive them during our normal operating cycle, which is generally one year.

Upfront payments to customers represent marketing allowances, such as sign-on bonuses, slotting fees, and promotional allowances provided to our customers. These allowances are recognized as an asset and amortized over the appropriate period of time as a reduction of revenue if we expect to generate future revenues associated with the upfront payment. If we do not expect to generate additional revenue, then the upfront payment is recognized in the consolidated statements of operations when payment occurs as a reduction of revenue. Upfront payments expected to be amortized during our normal operating cycle, which is generally one year, are classified as short-term contract assets.

Core premiums paid to customers represent the difference between the Remanufactured Core acquisition price paid to customers generally in connection with new business, and the related Used Core cost. The core premiums are treated as an asset and recognized as a reduction of revenue through the later of the date at which related revenue is recognized or the date at which the sales incentive is offered. We consider, among other things, the length of our largest ongoing customer relationships, duration of customer contracts, and the average life of vehicles on the road in determining the appropriate period of time over which to amortize these premiums. These core premiums are amortized over a period typically ranging from six to eight years, adjusted for specific circumstances associated with the arrangement. Core premiums are recorded as long-term contract assets. Core premiums expected to be amortized within our normal operating cycle, which is generally one year, are classified as short-term contract assets.

Finished goods premiums paid to customers represent the difference between the finished good acquisition price paid to customers, generally in connection with new business, and the related finished good cost, which is treated as an asset and recognized as a reduction of revenue through the later of the date at which related revenue is recognized or the date at which the sales incentive is offered. We consider, among other things, the length of our largest ongoing customer relationships, duration of customer contracts, and the average life of vehicles on the road in determining the appropriate period of time over which to amortize these premiums. Finished goods premiums are amortized over a period typically ranging from six to eight years, adjusted for specific circumstances associated with the arrangement. Finished goods premiums are recorded as long-term contract assets. Finished goods premiums expected to be amortized within our normal operating cycle, which is generally one year, are classified as short-term contract assets.

Long-term core inventory deposits represent the cost of Remanufactured Cores we have purchased from customers, which are held by the customers and remain on the customers’ premises. The costs of these Remanufactured Cores were established at the time of the transaction based on the then current cost. The selling value of these Remanufactured Cores was established based on agreed upon amounts with these customers. We expect to realize the selling value and the related cost of these Remanufactured Cores should our relationship with a customer end, a possibility that we consider remote based on existing long-term customer agreements and historical experience.

Revenue Recognition

Revenue is recognized when performance obligations under the terms of a contract with our customers are satisfied; generally, this occurs with the transfer of control of our products. Revenue is measured as the amount of consideration we expect to receive in exchange for transferring goods or providing services. Revenue is recognized net of all anticipated returns, marketing allowances, volume discounts, and other forms of variable consideration. Revenue is recognized either when products are shipped or when delivered, depending on the applicable contract terms.

The price of a finished remanufactured product sold to customers is generally comprised of separately invoiced amounts for the Remanufactured Core included in the product (“Remanufactured Core value”) and the unit portion included in the product (“Unit Value”), for which revenue is recorded based on our then current price list, net of applicable discounts and allowances. The Remanufactured Core value is recorded as revenue based upon the estimate of Used Cores that will not be returned by the customer for credit. These estimates are subjective and based on management’s judgment and knowledge of historical, current, and projected return rates. As reconciliations are completed with the customers the actual rates at which Used Cores are not being returned may differ from the current estimates. This may result in periodic adjustments of the estimated contract asset and liability amounts recorded and may impact the projected revenue recognition rates used to record the estimated future revenue. These estimates may also be revised if there are changes in contractual arrangements with customers, or changes in business practices. A significant portion of the remanufactured automotive parts sold to customers are replaced by similar Used Cores sent back for credit by customers under the core exchange programs (as described in further detail below). The number of Used Cores sent back under the core exchange programs is generally limited to the number of similar Remanufactured Cores previously shipped to each customer.

Revenue Recognition — Core Exchange Programs

Full price Remanufactured Cores: When remanufactured products are shipped, certain customers are invoiced for the Remanufactured Core value of the product at the full Remanufactured Core sales price. For these Remanufactured Cores, revenue is only recognized based upon an estimate of the rate at which these customers will pay cash for Remanufactured Cores in lieu of sending back similar Used Cores for credits under the core exchange programs. The remainder of the full price Remanufactured Core value invoiced to these customers is established as a long-term contract liability rather than being recognized as revenue in the period the products are shipped as we expect these Remanufactured Cores to be returned for credit under our core exchange programs.

Nominal price Remanufactured Cores: Certain other customers are invoiced for the Remanufactured Core value of the product shipped at a nominal (generally $0.01 or less) Remanufactured Core price. For these nominal Remanufactured Cores, revenue is only recognized based upon an estimate of the rate at which these customers will pay cash for Remanufactured Cores in lieu of sending back similar Used Cores for credits under the core exchange programs. Revenue amounts are calculated based on contractually agreed upon pricing for these Remanufactured Cores for which the customers are not returning similar Used Cores. The remainder of the nominal price Remanufactured Core value invoiced to these customers is established as a long-term contract liability rather than being recognized as revenue in the period the products are shipped as we expect these Remanufactured Cores to be returned for credit under our core exchange programs.

Revenue Recognition; General Right of Return

Customers are allowed to return goods that their end-user customers have returned to them, whether or not the returned item is defective (warranty returns). In addition, under the terms of certain agreements and industry practice, customers from time to time are allowed stock adjustments when their inventory of certain product lines exceeds the anticipated sales to end-user customers (stock adjustment returns). Customers have various contractual rights for stock adjustment returns, which are typically less than 5% of units sold. In some instances, a higher level of returns is allowed in connection with significant restocking orders. The aggregate returns are generally limited to less than 20% of unit sales.

The allowance for warranty returns is established based on a historical analysis of the level of this type of return as a percentage of total unit sales. The allowance for stock adjustment returns is based on specific customer inventory levels, inventory movements, and information on the estimated timing of stock adjustment returns provided by customers. Stock adjustment returns do not occur at any specific time during the year. The return rate for stock adjustments is calculated based on expected returns within the normal operating cycle, which is generally one year.

The Unit Value of the warranty and stock adjustment returns are treated as reductions of revenue based on the estimations made at the time of the sale. The Remanufactured Core value of warranty and stock adjustment returns are provided for as indicated in the paragraph “Revenue Recognition – Core Exchange Programs”.

As is standard in the industry, we only accept returns from on-going customers. If a customer ceases doing business with us, we have no further obligation to accept additional product returns from that customer. Similarly, we accept product returns and grant appropriate credits to new customers from the time the new customer relationship is established.

Contract Liability

Contract liability consists of: (i) customer allowances earned, (ii) accrued core payments, (iii) customer core returns accruals, (iv) core bank liability, (v) finished goods liabilities, and (vi) customer deposits.

Customer allowances earned includes all marketing allowances provided to customers. Such allowances include sales incentives and concessions. Voluntary marketing allowances related to a single exchange of product are recorded as a reduction of revenues at the time the related revenues are recorded or when such incentives are offered. Other marketing allowances, which may only be applied against future purchases, are recorded as a reduction to revenues in accordance with a schedule set forth in the relevant contract. Sales incentive amounts are recorded based on the value of the incentive provided. Customer allowances to be provided to customers within our normal operating cycle, which is generally one year, are considered short-term contract liabilities and the remainder are recorded as long-term contract liabilities.

Accrued core payments represent the sales price of Remanufactured Cores purchased from customers, generally in connection with new business, which are held by these customers and remain on their premises. The sales price of these Remanufactured Cores will be realized when our relationship with a customer ends, a possibility that we consider remote based on existing long-term customer agreements and historical experience. The payments to be made to customers for purchases of Remanufactured Cores within our normal operating cycle, which is generally one year, are considered short-term contract liabilities and the remainder are recorded as long-term contract liabilities.

Customer core returns accruals represent the full and nominally priced Remanufactured Cores shipped to our customers. When we ship product, we recognize an obligation to accept a similar Used Core sent back under the core exchange programs based upon the Remanufactured Core price agreed upon by us and our customer. The contract liability related to Used Cores returned by consumers to our customers but not yet returned to us are classified as short-term contract liabilities until we physically receive these Used Cores as they are expected to be returned during our normal operating cycle, which is generally one year and the remainder are recorded as long-term contract liabilities.

The core bank liability represents the full Remanufactured Core sales price for cores returned under our core exchange programs. The payment for these returned cores are made over a contractual repayment period pursuant to our agreement with this customer. Payments to be made within our normal operating cycle, which is generally one year, are considered short-term contract liabilities and the remainder are recorded as long-term contract liabilities.

Finished goods liabilities represents the agreed upon price of finished goods acquired from customers, generally in connection with new business. The payment for these finished goods are made over a contractual repayment period pursuant to our agreement with the customer. Payments to be made within our normal operating cycle, which is generally one year, are considered short-term contract liabilities and the remainder are recorded as long-term contract liabilities.

Customer deposits represent the receipt of prepayments from customers for the obligation to transfer goods or services in the future. We classify these customer deposits as short-term contract liabilities as we expect to satisfy these obligations within our normal operating cycle, which is generally one year.

Customer Finished Goods Returns Accrual

The customer finished goods returns accrual represents our estimate of our exposure to customer returns, including warranty returns, under our general right of return policy to allow customers to return items that their end user customers have returned to them and from time to time, stock adjustment returns when the customers’ inventory of certain product lines exceeds the anticipated sales to end-user customers. The customer finished goods returns accrual represents the Unit Value of the estimated returns and is classified as a current liability due to the expectation that these returns will occur within the normal operating cycle of one year. Our customer finished goods returns accrual was $34,411,000 and $38,312,000 at March 31, 2025 and 2024, respectively. The change in the customer finished goods returns accrual primarily resulted from the timing of returned goods authorizations (“RGAs”) issued at March 31, 2025 compared with March 31, 2024.

Income Taxes

We account for income taxes using the liability method, which measures deferred income taxes by applying enacted statutory rates in effect at the balance sheet date to the differences between the tax basis of assets and liabilities and their reported amounts in the financial statements. The resulting asset or liability is adjusted to reflect changes in the tax laws as they occur. A valuation allowance is provided to reduce deferred tax assets when it is more likely than not that a portion of the deferred tax asset will not be realized.

The primary components of our income tax expense were (i) federal income taxes, (ii) state income taxes, (iii) change in realizable deferred tax items, (iv) foreign income taxed at rates that are different from the federal statutory rate, and (v) impact of the non-deductible executive compensation under Internal Revenue Code Section 162(m).

Realization of deferred tax assets is dependent upon our ability to generate sufficient future taxable income. Significant judgment is required in determining our provision for income taxes, our deferred tax assets and liabilities and any valuation allowance recorded against our net deferred tax assets. We make these estimates and judgments about our future taxable income based on assumptions that are consistent with our future plans. A valuation allowance is established when we believe it is not more likely than not all or some of a deferred tax assets will be realized. In evaluating our ability to recover deferred tax assets within the jurisdiction in which they arise, we consider all available positive and negative evidence, including scheduled reversals of deferred tax liabilities, projected future taxable income, past financial performance, and tax planning strategies. At March 31, 2025 and 2024, we had a valuation allowance on deferred tax assets that is considered not more likely than not to be realized under U.S. GAAP. Should the actual amount differ from our estimate, the amount of our valuation allowance could be impacted.

We have made an accounting policy election to recognize the U.S. tax effects of global intangible low-taxed income as a component of income tax expense in the period the tax arises.

Results of Operations

The following discussion and analysis should be read together with the financial statements and notes thereto appearing elsewhere herein.

The following summarizes certain key operating consolidated data for the periods indicated:

Fiscal Years Ended March 31, 2025 2024 2023
Cash flows provided by (used in) operations $45,477,000 $39,172,000 $(21,754,000)
Finished goods turnover (1) 3.8 3.7 3.6

(1)

Finished goods turnover is calculated by dividing the cost of goods sold for the year by the average of beginning and ending non-core finished goods inventory values, for each fiscal year. We believe that this provides a useful measure of our ability to turn our inventory into revenues.

Fiscal 2025 Compared with Fiscal 2024

Net Sales and Gross Profit

The following summarizes consolidated net sales and gross profit:

Fiscal Years Ended March 31, 2025 2024
Net sales to external customers $757,354,000 $717,684,000
Cost of goods sold 603,526,000 585,133,000
Gross profit 153,828,000 132,551,000
Gross profit percentage 20.3% 18.5%

Net Sales. Our consolidated net sales for fiscal 2025 were $757,354,000, which represents an increase of $39,670,000, or 5.5%, from fiscal 2024 of $717,684,000 due to strong demand for both our rotating electric and brake-related product lines.

The following summarizes consolidated net sales by product mix:

Years Ended March 31, 2025 2024
Rotating electrical products 67% 66%
Brake-related products 21% 20%
Wheel hub products 8% 10%
Other products 4% 4%
100% 100%

38

Gross Profit. Our consolidated gross profit for fiscal 2025 increased $21,277,000, or 16.1%, to $153,828,000 from $132,551,000 for fiscal 2024. Our consolidated gross margin, as a percentage of consolidated net sales, improved by 1.8% for fiscal 2025 to 20.3% from 18.5% for fiscal 2024. The increase in our gross margin for fiscal 2025 reflects the benefit of our on-going strategy to utilize our global footprint to enhance operating efficiencies and our cost-saving initiatives. These increases were partially offset by (i) $4,607,000 for certain tariff costs paid for products sold before price increases were effective, (ii) $3,960,000 of certain one-time expenses for onboarding new business and (iii) $1,298,000 of transition expenses in connection with our on-going strategy to utilize our global footprint to enhance operating efficiencies. We expect to continue to realize benefits from these initiatives.

In addition, our gross margin for fiscal 2025 compared with fiscal 2024 was impacted by (i) amortization of core and finished goods premiums paid to customers related to new business of $10,738,000 and $10,963,000, respectively and (ii) the non-cash quarterly revaluation of cores that are part of the finished goods on the customers’ shelves (which are included in contract assets) to the lower of cost or net realizable value, which resulted in a write-down of $2,805,000 and $5,353,000, respectively.

Operating Expenses

The following summarizes consolidated operating expenses:

Fiscal Years Ended March 31, 2025 2024
General and administrative $64,047,000 $57,769,000
Sales and marketing 22,561,000 22,481,000
Research and development. 11,405,000 9,995,000
Foreign exchange impact of lease liabilities and forward contracts 15,892,000 (3,814,000)
Percent of net sales
General and administrative 8.5% 8.0%
Sales and marketing 3.0% 3.1%
Research and development 1.5% 1.4%
Foreign exchange impact of lease liabilities and forward contracts 2.1% (0.5)%

General and Administrative. Our general and administrative expenses for fiscal 2025 were $64,047,000, which represents an increase of $6,278,000, or 10.9%, from fiscal 2024 of $57,769,000. This increase was primarily due to a loss of $2,987,000 during fiscal 2025 compared with a gain of $515,000 during fiscal 2024 resulting from unfavorable fluctuations in foreign currency exchange rates on transactions denominated in foreign currencies during the year. In addition, our general and administrative expenses were impacted by $2,544,000 of increased severance during fiscal 2025 due to headcount reductions in connection with our strategy to enhance operating efficiencies.

Sales and Marketing. Our sales and marketing expenses were consistent at $22,561,000 for fiscal 2025 compared with $22,481,000 for fiscal 2024.

Research and Development. Our research and development expenses for fiscal 2025 were $11,405,000, which represents an increase of $1,410,000, or 14.1%, from fiscal 2024 of $9,995,000. This increase was primarily due to increased headcount, supplies, and outside consulting services.

Foreign Exchange Impact of Lease Liabilities and Forward Contracts. Our foreign exchange impact of lease liabilities and forward contracts were a non-cash loss of $15,892,000 compared with a non-cash gain of $3,814,000 for fiscal 2025 and 2024, respectively. This change during fiscal 2025 compared with fiscal 2024 was primarily due to (i) the remeasurement of our foreign currency-denominated lease liabilities, which resulted in a non-cash loss of $11,713,000 compared with a non-cash gain of $5,187,000, respectively, due to foreign currency exchange rate fluctuations and (ii) the forward foreign currency exchange contracts, which resulted in non-cash losses of $4,179,000 and $1,373,000, respectively, due to the changes in their fair values.

Operating Income

Consolidated Operating Income. Our consolidated operating income for fiscal 2025 was $39,923,000 compared with $46,120,000 for fiscal 2024. This decrease was primarily due our foreign exchange impact of lease liabilities and forward contracts, which were a non-cash loss of $15,892,000 compared with a non-cash gain of $3,814,000 for fiscal 2025 and 2024, respectively, partially offset by higher gross profit and other items as discussed above.

Interest Expense

Interest Expense, net. Our interest expense for fiscal 2025 was $55,550,000, which represents a decrease of $4,490,000, or 7.5%, from interest expense for fiscal 2024 of $60,040,000. This decrease was primarily due to lower outstanding balances under our credit facility of $90,787,000 at March 31, 2025 compared with $128,000,000 at March 31, 2024 and lower interest rates on our accounts receivable discount programs and credit facility. The weighted average interest rate on our accounts receivable discount programs was 6.2% for fiscal 2025 compared with 6.8% for fiscal 2024. The weighted average interest on borrowings under our credit facility was 7.46% at March 31, 2025 compared to 8.43% at March 31, 2024.

Change in Fair Value of Compound Net Derivative Liability

Change in Fair Value of Compound Net Derivative Liability. Our change in fair value of compound net derivative liability was a non-cash loss of $60,000 compared with a non-cash gain of $1,020,000 for fiscal 2025 and 2024, respectively, associated with the convertible notes issued on March 31, 2023.

Loss on Extinguishment of Debt

Loss on Extinguishment of Debt. Our loss on extinguishment of debt was $168,000 in connection with the repayment of the remaining outstanding balance of our term loans during fiscal 2024.

Provision for Income Taxes

Income Tax. We recorded a income tax expense of $3,783,000, or an effective tax rate of (24.1)%, and $36,176,000, or an effective tax rate of (276.8)%, for fiscal 2025 and 2024, respectively. The effective tax rate for fiscal 2025 was primarily impacted by (i) the change in valuation allowance, (ii) foreign income taxed at rates that are different from the federal statutory rate, and (iii) non-deductible executive compensation under Internal Revenue Code Section 162(m). Our effective tax rate for fiscal 2024 was primarily impacted by the establishment of a valuation allowance on deferred tax assets that were not expected to be realized.

Fiscal 2024 Compared with Fiscal 2023

A discussion of the changes in our results of operations for the year ended March 31, 2024, as compared with the year ended March 31, 2023, has been omitted from this Form 10-K but may be found in Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations” of the annual report on Form 10-K for the year ended March 31, 2024, filed with the SEC on June 11, 2024, and the 10-K/A for the fiscal year ended March 31, 2024 as filed with the SEC on June 28, 2024, which is available free of charge on the SEC’s website at www.sec.gov (http://www.sec.gov) by searching with our ticker symbol “MPAA” or at our internet address, www.motorcarparts.com (http://www.motorcarparts.com), by clicking “Investors/Financials/SEC Filings” located at the top of the page.

Liquidity and Capital Resources

Overview

We had working capital (current assets minus current liabilities) of $160,446,000 and $156,034,000, a ratio of current assets to current liabilities of 1.5:1.0 at March 31, 2025 and 1.4:1.0 at March 31, 2024.

In June 2024, we enrolled in a feature with our lenders, under which we sweep our cash collections to pay down our revolving facility and borrow on-demand to fund payments. This feature is expected to reduce interest expense on borrowings under the credit facility.

Our primary source of liquidity was from cash generated from operations, the use of our receivable discount programs, and credit facility during fiscal 2025. We believe our cash and cash equivalents, use of receivable discount programs, amounts available under our credit facility, and other sources are sufficient to satisfy our expected future liquidity needs, including lease and capital expenditure obligations over the next 12 months.

Cash Flows

The following summarizes cash flows as reflected in the consolidated statements of cash flows:

Cash provided by (used in): Fiscal Years Ended March 31, 2025 2024 2023
Operating activities $45,477,000 $39,172,000 $(21,754,000)
Investing activities (4,469,000) (479,000) (4,191,000)
Financing activities (44,655,000) (36,439,000) 14,308,000
Effect of exchange rates on cash and cash equivalents (898,000) 124,000 217,000
Net (decrease) increase in cash and cash equivalents $(4,545,000) $2,378,000 $(11,420,000)
Additional selected cash flow data:
Depreciation and amortization $10,400,000 $11,619,000 $12,444,000
Capital expenditures 4,578,000 1,000,000 4,201,000

Fiscal 2025 Compared with Fiscal 2024

Net cash provided by operating activities was $45,477,000 and $39,172,000 for fiscal 2025 and 2024, respectively. The increase in our net cash provided by operating activities was due to increased operating results (net loss plus the net add-back for non-cash transactions in earnings), partially offset by changes in our working capital requirements to support our growth initiatives. We continue to manage our working capital to maximize our operating cash flow.

Net cash used in investing activities was $4,469,000 and $479,000 for fiscal 2025 and 2024, respectively. The change in our investing activities primarily resulted from increased capital expenditures.

Net cash used in financing activities was $44,655,000 and $36,439,000 for fiscal 2025 and 2024, respectively. The change in our financing activities primarily resulted from (i) the net repayments of amounts outstanding under our revolving facility of $37,213,000 during fiscal 2025 compared with $17,200,000 during fiscal 2024 and (ii) the repurchase of 542,134 shares of our common stock for $4,832,000 during fiscal 2025. During the prior fiscal year, we paid off our remaining term loans of $13,125,000.

Fiscal 2024 Compared with Fiscal 2023

A discussion of the changes in our operating activities, investing activities, and financing activities for the year ended March 31, 2024, as compared with the year ended March 31, 2023, has been omitted from this Form 10-K but may be found in Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations” of the annual report on Form 10-K for the year ended March 31, 2024, filed with the SEC on June 11, 2024, and the 10-K/A for the fiscal year ended March 31, 2024, as filed with the SEC on June 28, 2024, which is available free of charge on the SEC’s website at www.sec.gov (http://www.sec.gov) by searching with our ticker symbol “MPAA” or at our internet address, www.motorcarparts.com (http://www.motorcarparts.com), by clicking “Investors/Financials/SEC Filings” located at the top of the page.

Capital Resources

Credit Facility

We are party to a $268,620,000 senior secured financing, (as amended from time to time, the “Credit Facility”) with a syndicate of lenders, and PNC Bank, National Association, as administrative agent, consisting of (i) a $238,620,000 revolving loan facility, subject to borrowing base restrictions, a $24,000,000 sublimit for borrowings by Canadian borrowers, and a $20,000,000 sublimit for letters of credit (the “Revolving Facility”) and (ii) a $30,000,000 term loan facility (the “Term Loans”). The Term Loans were repaid during the year ended March 31, 2024. The Credit Facility matures on December 12, 2028. The lenders have a security interest in substantially all of our assets. In June 2024, we enrolled in a feature with our lenders, under which we sweep our cash collections to pay down our revolving facility and borrow on-demand to fund payments. This feature is expected to reduce interest expense on borrowings under the Credit Facility.

We had $90,787,000 and $128,000,000 outstanding under the Revolving Facility at March 31, 2025 and 2024, respectively. In addition, $7,047,000 was outstanding for letters of credit at March 31, 2025. At March 31, 2025, after certain contractual adjustments, $135,150,000 was available under the Revolving Facility. The interest rate on our Revolving Facility was 7.46% and 8.43%, at March 31, 2025 and 2024, respectively.

The Credit Facility requires us to maintain a minimum fixed charge coverage ratio if undrawn availability is less than 22.5% of the aggregate revolving commitments and a specified minimum undrawn availability. During the period ended March 31, 2025, undrawn availability was greater than the 22.5% threshold, therefore, the fixed charge coverage ratio financial covenant was not required to be tested.

Convertible Notes

On March 31, 2023, we entered into a note purchase agreement, as amended, (the “Note Purchase Agreement”) with Bison Capital Partners VI, L.P. and Bison Capital Partners VI-A, L.P. (collectively, the “Purchasers”) and Bison Capital Partners VI, L.P., as the purchaser representative (the “Purchaser Representative”) for the issuance and sale of $32,000,000 in aggregate principal amount of convertible notes due in 2029 (the “Convertible Notes”), which was used for general corporate purposes. The Convertible Notes bear interest at a rate of 10.0% per annum, compounded annually, and payable (i) in kind or (ii) in cash, annually in arrears on April 1 of each year, commencing on April 1, 2024. In April 2024, non-cash accrued interest on the Convertible Notes of $3,209,000 was paid in-kind and is included in the principal amount of Convertible Notes at March 31, 2025.

The aggregate proceeds from the offering were approximately $31,280,000, net of initial purchasers’ fees and other related expenses. The initial conversion rate is 66.6667 shares of our common stock per $1,000 principal amount of notes (equivalent to an initial conversion price of approximately $15.00 per share of common stock). At March 31, 2025, we had 28,240,973 shares of our common stock available to be issued if the Convertible Notes were converted.

In connection with the Note Purchase Agreement, we entered into common stock warrants (the “Warrants”) with the Purchasers, which mature on March 30, 2029. The Warrants do not become exercisable unless a Company Redemption (as defined below) occurs and the volume weighted average price of our common stock for 20 consecutive days prior to the redemption is less than $15.00. The fair value of the Warrants, using Level 3 inputs and the Monte Carlo simulation model, was zero at March 31, 2025 and 2024. We estimate the fair value of the Warrants at each balance sheet date. Any subsequent changes from the initial recognition in the fair value of the Warrants will be recorded in current period earnings in the consolidated statements of operations.

The Convertible Notes may be converted, subject to certain conditions, at an initial conversion price of $15.00, subject to adjustment as provided in the Convertible Notes (the “Conversion Option”). The Convertible Notes also include a provision for a return of interest (“Return of Interest”), which requires the Purchasers to return 15.0% of the interest paid to us in certain circumstances, subject to reduction of the Return of Interest amount in the event that the Return of Interest amount would result in total payments to the Purchasers of less than two times the original principal amount. The Return of Interest provision is accounted for as part of the Conversion Option and if the Conversion Option is exercised in the future, the Return of Interest provision will remain outstanding until the Purchaser sells all of the underlying stock received upon conversion. Upon conversion, any value associated with the Return of Interest provision will be reflected as a derivative asset upon conversion, with changes in fair value being recorded in earnings in the consolidated statements of operations until settlement in connection with the sale of the underlying stock by the Purchaser. Unless and until we deliver a redemption notice, the Purchasers of the Convertible Notes may convert their Convertible Notes at any time at their option. Upon conversion, the Convertible Notes will be settled in shares of our common stock. The conversion rate and conversion price are subject to customary adjustments upon the occurrence of certain events. The Convertible Notes have a stated maturity of March 30, 2029, subject to earlier conversion or redemption in accordance with their terms.

If there is a Fundamental Transaction, as defined in the Form of Convertible Promissory Note, we may redeem all or part of the Convertible Notes. Except in the case of the occurrence of a Fundamental Transaction, we may not redeem the Convertible Notes prior to March 31, 2026. After March 31, 2026, we may redeem all or part of the Convertible Notes for a cash purchase (the “Company Redemption”) price equal to the Redemption Price (as defined below) plus $5,000,000, but only if (i) we are listed on a national exchange, (ii) there is no “Event of Default” occurring and continuing and (iii) Adjusted EBITDA for the prior four quarters is greater than $80,000,000. The “Redemption Price” shall mean a cash amount equal to the principal amount of the Convertible Notes to be redeemed, plus accrued and unpaid interest. However, if the volume weighted average price of our common stock for 20 consecutive days prior to the notice of the Company Redemption is less than $15, the Purchasers may exercise the warrants and we will pay the Redemption Price plus $2,000,000.

The Conversion Option and the Company Redemption both met the criteria for bifurcation from the Convertible Notes as derivatives and have been combined as a compound net derivative liability (the “Compound Net Derivative Liability”). The Compound Net Derivative Liability has been recorded within convertible note, related party in the consolidated balance sheets. The fair value of the Conversion Option and the Company Redemption option using Level 3 inputs and the Monte Carlo simulation model was a liability of $9,000,000 and $9,800,000, and an asset of $1,530,000 and $2,390,000 at March 31, 2025 and 2024, respectively. We estimate the fair value of the Compound Net Derivative Liability at each balance sheet date. Any subsequent changes from the initial recognition in the fair value of the Compound Net Derivative Liability is recorded in current period earnings in the consolidated statements of operations. During the years ended March 31, 2025 and 2024, we recorded a loss of $60,000 and a gain of $1,020,000, respectively, as the change in fair value of the Compound Net Derivative Liability in the consolidated statements of operations and consolidated statements of cash flows.

The Convertible Notes also contain additional features, such as, default interest and options related to a Fundamental Transaction, requiring bifurcation which were not separately accounted for as the value of such features were not material at March 31, 2025 and 2024. Any subsequent changes from the initial recognition in the fair value of those features is recorded in current period earnings in the consolidated statements of operations.

The Convertible Notes include customary provisions relating to the occurrence of Events of Default, which include the following: (i) certain payment defaults on the Convertible Notes; (ii) certain events of bankruptcy, insolvency and reorganization involving us or any of our subsidiaries; (iii) the entering of one or more final judgments or orders against us or any of our subsidiaries for an aggregate payment exceeding $25,000,000; (iv) the acceleration of senior debt or any other debt greater than $25,000,000; (v) certain failures of us to comply with certain provisions of the Note Purchase Agreement or material breaches of the Note Purchase Agreement by us or any of our subsidiaries; (vi) any material provision of the Note Purchase Agreement, the Convertible Notes, the guarantee, the subordination agreement, the Warrants or the registration rights agreement, for any reason, ceases to be valid and binding on us or any subsidiary, or any subsidiary shall so claim in writing to challenge the validity of or our liability under the Note Purchase Agreement, the Convertible Notes, or the registration rights agreement; or (vii) we fail to maintain the listing of our capital stock on a national securities exchange. Events of Default will be subject to a 30-day cure period except for those related to clause (ii) and (iv) of the preceding sentence.

If an Event of Default occurs and is continuing, then, we shall deliver written notice to the Purchasers within 5 business days of first learning of such Event of Default. If an Event of Default involving bankruptcy, insolvency or reorganization events with respect to us (and not solely with respect to our significant subsidiary) occurs, then the principal amount of, and all accrued and unpaid interest on, all of the Convertible Notes then outstanding will immediately become due and payable without any further action.

Unamortized debt issuance costs of $916,000 and $1,058,000 are presented in the balance sheet as a direct deduction from the carrying amounts of the Convertible Notes at March 31, 2025 and 2024, respectively. Debt issuance costs are amortized using the effective interest method through the maturity of the Convertible Notes and recorded in interest expense in the consolidated statements of operations. The effective interest rate was 18.3% as of March 31, 2025 and 2024, respectively. Debt issuance costs of $360,000 allocated to the Compound Net Derivative Liability were immediately expensed to interest expense in the consolidated statements of operations for the year ended March 31, 2023.

Additionally, pursuant to the Note Purchase Agreement, subject to certain conditions, the Purchaser Representative shall have the right to nominate one director to serve (the “Investor Director”) on our Board of Directors (the “Board”). If an Investor Director is not currently serving on the Board, and subject to certain other conditions set forth in the Note Purchase Agreement, the Purchaser Representative shall have the right to designate one person to have observation rights with respect to all meetings of the Board. In connection with our entry into the Note Purchase Agreement, we appointed Douglas Trussler to serve on our Board.

Accounts Receivable Discount Programs

We use accounts receivable discount programs offered by certain customers and their respective banks. Under these programs, we have options to sell those customers’ receivables to those banks at a discount to be agreed upon at the time the receivables are sold. These accounts receivable discount programs allow us to accelerate receipt of payment on customers’ receivables. While these arrangements have reduced our working capital needs, there can be no assurance that these accounts receivable discount programs will continue in the future. Interest expense resulting from these accounts receivable discount programs would increase if interest rates rise, if utilization of these accounts receivable discount programs expand, if customers extend their payment to us, or if the discount period is extended to reflect more favorable payment terms to customers.

The following is a summary of the accounts receivable discount programs:

Fiscal Years Ended March 31, 2025 2024
Receivables discounted $643,918,000 $618,012,000
Weighted average days 343 336
Weighted average discount rate 6.2% 6.8%
Amount of discount as interest expense $38,021,000 $39,175,000

44

Supplier Finance Programs

We utilize a supplier finance program, which allows certain of our suppliers to sell their receivables due from us to participating financial institutions at the sole discretion of both the supplier and the financial institutions. The program is administered by a third party. Commitments from participating financial institutions that are available to suppliers under this program increased to $30,000,000 from $15,000,000 during fiscal 2025. We have no economic interest in the sale of these receivables and no direct relationship with the financial institution. Payments to the third-party administrator are based on services rendered and are not related to the volume or number of financing agreements between suppliers, financial institution, and the third-party administrator. We are not a party to agreements negotiated between participating suppliers and the financial institution. Our obligations to our suppliers, including amounts due and payment terms, are not affected by a supplier's decision to participate in this program. We do not provide guarantees and there are no assets pledged to the financial institution or the third-party administrator for the committed payment in connection with this program. At March 31, 2025 and 2024, we had $33,661,000 and $1,695,000, respectively, of outstanding supplier obligations confirmed as valid under this program, included in accounts payable in the consolidated balance sheets.

The following is a summary of the changes in outstanding supplier obligations confirmed as valid under this program:

Year Ended March 31, 2025
Confirmed obligations outstanding at March 31, 2024 $1,695,000
Invoices confirmed as valid during the year 91,951,000
Confirmed invoices paid during the year (59,985,000)
Confirmed obligations outstanding at March 31, 2025 $33,661,000

Multi-year Customer Agreements

We have or are renegotiating long-term agreements with many of our major customers. Under these agreements, which in most cases have initial terms of at least four years, we are designated as the exclusive or primary supplier for specified categories of our products. Because of the very competitive nature of the market and the limited number of customers for these products, our customers have sought and obtained price concessions, significant marketing allowances and more favorable delivery and payment terms in consideration for our designation as a customer’s exclusive or primary supplier. These incentives differ from contract to contract and can include (i) the issuance of a specified amount of credits against receivables in accordance with a schedule set forth in the relevant contract, (ii) support for a particular customer’s research or marketing efforts provided on a scheduled basis, (iii) discounts granted in connection with each individual shipment of product, and (iv) other marketing, research, store expansion or product development support. These contracts typically require that we meet ongoing performance standards.

While these longer-term agreements strengthen our customer relationships, the increased demand for our products often requires that we increase our inventories and personnel. Customer demands that we purchase their Remanufactured Core inventory also require the use of our working capital. The marketing and other allowances we typically grant our customers in connection with our new or expanded customer relationships adversely impact the near-term revenues, profitability and associated cash flows from these arrangements. However, we believe the investment we make in these new or expanded customer relationships will improve our overall liquidity and cash flow from operations over time.

Share Repurchase Program

In August 2018, our board of directors approved an increase in our share repurchase program from $20,000,000 to $37,000,000 of our common stock. During fiscal 2025, we repurchased 542,134 shares of our common stock for $4,832,000. During fiscal 2024 and 2023, we did not repurchase any shares of our common stock. As of March 31, 2025, $23,577,000 was utilized and $13,423,000 remains available to repurchase shares under the authorized share repurchase program, subject to the limit in our Credit Facility and Convertible Notes. We retired the 1,379,141 shares repurchased under this program through March 31, 2025. Our share repurchase program does not obligate us to acquire any specific number of shares and shares may be repurchased in privately negotiated and/or open market transactions.

During fiscal 2025, we adopted a written trading plan under Rule 10b5-1 of the SEC rule to facilitate share repurchases under our current authorized program. The adoption of a 10b5-1 plan allows us the ability to repurchase shares when we would be ordinarily restricted from purchases due to blackout periods or being in possession of material non-public information.

Capital Expenditures and Commitments

Our total capital expenditures were $6,066,000 for fiscal 2025 and $1,755,000 for fiscal 2024. These capital expenditures include (i) cash paid for the purchase of plant and equipment, (ii) equipment acquired under finance leases, and (iii) non-cash capital expenditures. Capital expenditures for fiscal 2025 primarily include the purchase of equipment for our current operations and our global growth initiatives. We expect to incur approximately $9,500,000 of capital expenditures primarily to support our global growth initiatives and maintenance of our facilities and equipment during fiscal 2026. We have used and expect to continue using our working capital and additional capital lease obligations to finance these capital expenditures.

Contractual Obligations

The following summarizes our contractual obligations and other commitments as of March 31, 2025 and the effect such obligations could have on our cash flows in future periods:

Contractual Obligations Payments Due by Period Total Less than 1 year 1 to 3 years 3 to5 years More than 5 years
Finance lease obligations (1) $3,557,000 $1,396,000 $1,555,000 $606,000 $-
Operating lease obligations (2) 92,392,000 13,983,000 23,760,000 22,530,000 32,119,000
Revolving facility (3) 90,787,000 - 90,787,000
Convertible notes (4) 56,704,000 - 56,704,000
Accrued core payment (5) 7,287,000 3,404,000 3,883,000 -
Core bank liability (6) 12,113,000 2,018,000 10,095,000 -
Finished goods liabilities (7) 518,000 518,000 - -
Unrecognized tax benefits (8) - - - -
Customer allowances earned (9) 47,194,000 14,451,000 21,430,000 9,265,000 2,048,000
Total $310,552,000 $35,770,000 $60,723,000 $179,892,000 $34,167,000

(1) Finance lease obligations represent amounts due under finance leases for various types of equipment.

(2) Operating lease obligations represent amounts due for rent under our leases for all our facilities and certain equipment.

(3) Obligations under our Revolving Facility mature on December 12, 2028. This debt is classified as a short term liability on our balance sheet as we expect to use our working capital to repay the amounts outstanding under our Revolving Facility.

(4) Obligations under our Convertible Notes mature on March 30, 2029. There are no future payments required under the Convertible Notes prior to their maturity, therefore, the carrying value of the notes plus interest payable in kind, assuming no early redemption or conversion has occurred, is included in the above table based on their maturity date of March 30, 2029.

(5) Accrued core payment represents the amounts due for principal of $6,964,000 and interest payments of $323,000 to be made in connection with the purchases of Remanufactured Cores from our customers, which are held by these customers and remain on their premises.

(6) The core bank liability represents the amounts due for principal of $11,843,000 and interest payments of $270,000 to be made in connection with the return of Used Cores from our customers.

(7) Finished goods liabilities represents the amounts due for principal of $518,000 and no interest payments to be made in connection with the purchase of finished goods from our customers.

(8) We are unable to reliably estimate the timing of future payments related to uncertain tax position liabilities at March 31, 2025; therefore, future tax payment accruals related to uncertain tax positions in the amount of $1,362,000 have been excluded from the table above.

(9) Customer allowances earned represent commitments we have with certain customers to provide marketing allowances in consideration for multi-year customer agreements to provide products over a defined period.

Market risk

As filed, 4,627 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Our primary market risk relates to changes in interest rates, foreign currency exchange rates, and customer credit. We do not enter into derivatives or other financial instruments for trading or speculative purposes. As our overseas operations expand, our exposure to the risks associated with foreign currency fluctuations will continue to increase.

Interest rate risk

We are exposed to changes in interest rates primarily as a result of our borrowing and receivable discount programs, which have interest costs that vary with interest rate movements. Our revolving facility bears interest at variable base rates, plus an applicable margin, which was 7.46% and 8.43% at March 31, 2025 and 2024, respectively. At March 31, 2025, borrowings under our revolving facility totaled $90,787,000. If interest rates were to increase 1%, our net annual interest expense on our revolving facility would have increased by approximately $908,000. In addition, during the years ended March 31, 2025 and 2024, collections under our accounts receivable discount program were $643,918,000 and $618,012,000, respectively. The weighted average discount rate was 6.2% and 6.8% during fiscal 2025 and 2024, respectively. If discount rates were to increase 1%, our net annual interest expense on our accounts receivable discount programs would have increased by approximately $6,439,000.

Foreign currency risk

We are exposed to foreign currency exchange risk inherent in our purchases and expenses denominated in currencies other than the U.S. dollar. We transact business in the following foreign currencies: Mexican pesos, Malaysian ringgit, Singapore dollar, Chinese yuan, Indian rupee, and the Canadian dollar. Our primary currency risks result from fluctuations in the value of the Mexican peso and to a lesser extent, the Chinese yuan. To mitigate these risks, we enter into forward foreign currency exchange contracts to exchange U.S. dollars for these foreign currencies. The extent to which we use forward foreign currency exchange contracts is periodically reviewed in light of our estimate of market conditions and the terms and length of anticipated requirements. The use of derivative financial instruments allows us to reduce our exposure to the risk that the eventual net cash outflow resulting from funding the expenses of the foreign operations will be materially affected by changes in exchange rates. These contracts generally expire in a year or less. Any changes in the fair values of our forward foreign currency exchange contracts are reflected in current period earnings. Based upon our forward foreign currency exchange contracts related to these currencies, an increase of 10% in exchange rates at March 31, 2025 would have increased our operating expenses by approximately $4,023,000. During fiscal 2025 and fiscal 2024, losses of $4,179,000 and $1,373,000, respectively, were recorded due to the change in the value of the forward foreign currency exchange contracts subsequent to entering into the contracts. In addition, we recorded a loss of $11,713,000 and a gain of $5,187,000 in connection with the remeasurement of foreign currency-denominated lease liabilities during fiscal 2025 and fiscal 2024, respectively.

Credit Risk

We regularly review our accounts receivable and allowance for credit losses by considering factors such as historical experience, credit quality and age of the accounts receivable, and the current economic conditions that may affect a customer’s ability to pay such amounts owed to us. The majority of our sales are to leading automotive aftermarket parts suppliers. We participate in trade accounts receivable discount programs with our major customers. If the creditworthiness of any of our customers was downgraded, we could be adversely affected, in that we may be subjected to higher interest rates on the use of these discount programs or we could be forced to wait longer for payment. In certain cases, we have experienced higher interest rates due to changes in customer credit profiles, which has impacted the overall cost of these financing arrangements. Should our customers experience significant cash flow problems, our financial position and results of operations could be materially and adversely affected, and the maximum amount of loss that would be incurred would be the outstanding receivable balance, Used Cores expected to be returned by customers, and the value of the Remanufactured Cores held at customers’ locations. We maintain an allowance for credit losses that, in our opinion, provides for an adequate reserve to cover losses that may be incurred.

Controls and procedures

As filed, 4,333 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Evaluation of Disclosure Controls and Procedures

Management, with the participation of our Chief Executive Officer (“CEO”), Chief Financial Officer (“CFO”) and Chief Accounting Officer (“CAO”), has evaluated the effectiveness of our disclosure controls and procedures (as defined in Rules 13a- 15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended, or the “Exchange Act,”) as of the end of the period covered by this Annual Report on Form 10-K.

Our disclosure controls and procedures are designed to provide reasonable assurance that information we are required to disclose in the reports we file or submit under the Exchange Act is accumulated and communicated to our management, including our CEO, CFO and CAO, as appropriate to allow timely decisions regarding required disclosures, and is recorded, processed, summarized, and reported within the time periods specified in the SEC’s rules and forms. Based on this evaluation, our CEO, CFO and CAO have concluded that our disclosure controls and procedures were effective at the reasonable assurance level as of March 31, 2025.

Management’s Annual Report on Internal Control over Financial Reporting

Management is responsible for establishing and maintaining adequate internal control over financial reporting, as defined in Rules 13a-15(f) and 15d- 15(f) under the Exchange Act. Our internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of our financial statements for external purposes in accordance with generally accepted accounting principles.

Management assessed the effectiveness of our internal control over financial reporting as of March 31, 2025 using the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission in Internal Control—Integrated Framework (2013). Based on its assessment, our management, including our CEO and CFO, has concluded that our internal control over financial reporting was effective as of March 31, 2025.

The effectiveness of our internal control over financial reporting as of March 31, 2025 has been audited by the Company’s independent registered public accounting firm, Ernst & Young LLP. Their assessment is included in the accompanying Report of Independent Registered Public Accounting Firm on Internal Control over Financial Reporting.

Change in Internal Control Over Financial Reporting

There was no change in our internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) identified in connection with the evaluation of our internal control performed during the period covered by this report, that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

Inherent Limitations on Effectiveness of Controls

Management recognizes that a control system, no matter how well conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud or error, if any, have been detected. These inherent limitations include the realities that judgments in decision making can be faulty, and that breakdowns can occur because of a simple error or mistake.

Additionally, controls can be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the controls. The design of any system of controls also is based in part upon certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions; over time, controls may become inadequate because of changes in conditions, or the degree of compliance with policies or procedures may deteriorate. Because of the inherent limitations in a cost-effective control system, misstatements due to error or fraud may occur and not be detected.

Figures reported in this filing

Standardized line items from the XBRL in this filing, for the period ended 2025-03-31. Comparative periods it repeats are left out.

Figures reported in this filing
Line itemPeriodValueXBRL concept
Revenue12 months2024-04-01 to 2025-03-31$757.4mus-gaap:RevenueFromContractWithCustomerExcludingAssessedTax
Cost of revenue12 months2024-04-01 to 2025-03-31$603.5mus-gaap:CostOfGoodsAndServicesSold
Gross profit12 months2024-04-01 to 2025-03-31$153.8mus-gaap:GrossProfit
Research and development12 months2024-04-01 to 2025-03-31$11.4mus-gaap:ResearchAndDevelopmentExpense
Operating income12 months2024-04-01 to 2025-03-31$39.9mus-gaap:OperatingIncomeLoss
Income tax12 months2024-04-01 to 2025-03-31$3.8mus-gaap:IncomeTaxExpenseBenefit
Net income12 months2024-04-01 to 2025-03-31−$19.5mus-gaap:NetIncomeLoss
Diluted EPS12 months2024-04-01 to 2025-03-31−$0.99us-gaap:EarningsPerShareDiluted
Basic EPS12 months2024-04-01 to 2025-03-31−$0.99us-gaap:EarningsPerShareBasic
Diluted shares (weighted)12 months2024-04-01 to 2025-03-3119,685,322 sharesus-gaap:WeightedAverageNumberOfDilutedSharesOutstanding
Operating cash flow12 months2024-04-01 to 2025-03-31$45.5mus-gaap:NetCashProvidedByUsedInOperatingActivities
Capital expenditure12 months2024-04-01 to 2025-03-31$4.6mus-gaap:PaymentsToAcquirePropertyPlantAndEquipment
Share repurchases12 months2024-04-01 to 2025-03-31$4.8mus-gaap:PaymentsForRepurchaseOfCommonStock
Cash and equivalentsAt period end2025-03-31$9.4mus-gaap:CashAndCashEquivalentsAtCarryingValue
Current assetsAt period end2025-03-31$511.5mus-gaap:AssetsCurrent
Total assetsAt period end2025-03-31$957.6mus-gaap:Assets
Current liabilitiesAt period end2025-03-31$351.0mus-gaap:LiabilitiesCurrent
Total liabilitiesAt period end2025-03-31$699.9mus-gaap:Liabilities
Shareholders' equityAt period end2025-03-31$257.7mus-gaap:StockholdersEquity

Source: SEC EDGAR, the filing index for accession 0001140361-25-021940. Last ingested by Listed: Nov 14, 2026, 23:32 ET. Listed shows no prices and gives no investment advice.