Applied Energetics, Inc.: Form 10-K for the period ended Dec 31, 2012
Filed with the SEC on Mar 29, 2013 and accepted by EDGAR at Mar 29, 2013, 16:36 ET.
Business
As filed, 11,226 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.
Cautionary Note Concerning Forward-Looking Statements
Certain statements in this Form 10-K constitute forward-looking statements within the meaning of the Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934. Forward-looking statements include all statements that do not relate solely to the historical or current facts, and can be identified by the use of forward looking words such as "may", "believe", "will", "expect", "project", "anticipate", “estimates", "plans", "strategy", "target", "prospects" or "continue", and words of similar meaning. These forward looking statements are based on the current plans and expectations of our management and are subject to a number of uncertainties and risks that could significantly affect our current plans and expectations, as well as future results of operations and financial condition and may cause our actual results, performances or achievements to be materially different from any future results, performances or achievements expressed or implied by such forward-looking statements. This Form 10-K contains important information as to risk factors under Item 1A. Although we believe that the expectations reflected in such forward-looking statements are reasonable, there can be no assurance that such expectations will prove to have been correct. We do not assume any obligation to update these forward-looking statements to reflect actual results, changes in assumptions, or changes in other factors affecting such forward-looking statements.
Available Information
Applied Energetics, Inc. makes available free of charge on its website at www.appliedenergetics.com (http://www.appliedenergetics.com) its annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act, as soon as reasonably practical after electronically filing or furnishing such material to the Securities and Exchange Commission (“SEC”).
This report may be read or copied at the SEC’s Public Reference Room at 100 F Street, NE, Room 1580, Washington, DC 20549 or at www.sec.gov (http://www.sec.gov). Information on the operation of the Public Reference Room may be obtained by calling the SEC at 1-800-SEC-0330.
General
Applied Energetics, Inc. (“company”, “Applied Energetics”, “we”, “our” or “us”) designs, develops and manufactures solid state Ultra Short Pulse (“USP”) lasers for commercial applications and applied energy systems for commercial and military applications. Through our technology development efforts, we have gained expertise and proprietary knowledge in high performance lasers and high-voltage electronics.
Applied Energetics, Inc. is a corporation organized and existing under the laws of the State of Delaware. Our executive office is located at 4585 S. Palo Verde Road, Suite 405, Tucson, Arizona, 85714 and our telephone number is (520) 628-7415.
Recent Developments
The U.S. Government has significantly reduced defense spending and we do not anticipate receiving significant additional Government funding in the near future. We intend to continue to seek U.S. Government funding for our Laser Guided Energy (“LGE”), Laser Induced Plasma Channel (“LIPC”), counter-improvised explosive devices (“IED”) and high voltage laser technologies and USP systems. We have suspended the majority of our Government work due to the lack of Government funding. We have also developed our USP laser technologies and systems for commercial markets. We are not investing company funds or resources to further develop and enhance our LGE, LIPC, counter-IED and high voltage technologies and systems. As of March 18, 2013, our backlog was approximately $ 0.
As a result of the decrease in U.S. Government funding, we have significantly reduced our workforce to a level consistent with our expected operations.
We are considering strategic alternatives, including mergers, the acquisition of one or more businesses or technologies, and/or the disposition of one or more of our existing businesses.
Our continuance in business beyond 2013 is dependent on successful development of commercial customers, sales of our USP laser systems, obtaining profitable operations and additional financing necessary to fund our operations. Additional contracts from our Department of Defense customers, if available and substantial, will assist in funding our operations and contribute to revenue and cash flow.
High-Voltage Technologies
We have acquired and developed unique high-voltage capabilities focused on providing high-voltage solutions for semiconductor, aerospace, chemical processing, and other military and commercial activities. Opportunities currently in process or under development include advanced electron-beam technologies, nested high-voltage generators and other unique power solutions for use in a wide range of commercial and military applications. We believe our electron beam technologies are more compact than competitive technologies and offer customers a capable solution for applications that require less space for implementation.
Defense
We have delivered innovative technologies and systems to address urgent military requirements, including neutralizing improvised explosive devices and other high priority missions of U.S. military forces.
LGE and LIPC® Technologies
Upon our inception in 2002, we began developing LGE and LIPC technologies intended to precisely deliver high voltage electrical charges by using a laser to create a conductive path in the atmosphere. We have protected the enabling intellectual property through U.S. Patent filings. LGE development has been funded through multiple Department of Defense (“DoD”) contracts in support of U.S. Navy, Army, Air Force, and the Office of Secretary of Defense programs, as well as through internally funded research initiatives.
We have completed all funded work authorized under our contract with the U. S. Army’s Research, Development and Engineering Command (“ARDEC”). We continue to responded to ARDEC requests for proposal on additional funding for development of our LGE technology; however, there is no assurance that further funding will be awarded.
Counter-IED Technologies
We have developed and delivered a system that demonstrated significant capability in over 200 missions in Afghanistan countering IEDs from mid-2009 through early 2011.
Patents and Proprietary Information
Since our inception, we have pursued the development of a range of core intellectual property objectives using internal investment, and have aggressively pursued patents on such technology. The objective of this approach has been to establish a sole source role for us in customer-funded technology and product development contracts, as well as to build and protect the value of the intellectual property that we create, seeking to establish a preferred competitive position in the commercial marketplace. Presently, fourteen U.S. Patents have been issued and thirty-two U.S. patent applications are pending. We currently have U.S. Government initiated “national security related” secrecy orders for eleven of the thirty-two pending patent applications. The U.S. Patent and Trademark Office imposes secrecy orders when disclosure of an invention by publication of a patent would be detrimental to the United States’ national security. These patents are treated as under review unless and until they are declassified, at which time patents may be issued, with enforcement based on the original filing date. We have thus far received notice that ten of these patent applications under secrecy order have been found patentable by the U.S. Patent Office. Applied Energetics patents and patent applications relate to our core LIPC technology, counter-IED offerings, and other technologies related to LGE, laser and high voltage applications.
Customer Dependency
Historically, revenue was derived from contracts with Government agencies or contractors to the Government representing approximately 90% of total revenue for both 2012, and 2011. The significant reduction in Government funding for our LGE, LIPC and counter-IED technologies and systems has had, and will continue to have, a material adverse effect on Applied Energetics. We do not anticipate significant funding from our Government Customers in 2013 and thus continued operations will be dependent on funding from new customers yet to be developed. When we refer to “Government” we mean the U.S. Government and its agencies. Over the past three years our efforts have increasingly focused on developing and attempting to market applications of our technologies for commercial products and markets. We believe that both our USP laser technologies and the compact high voltage generation systems offer unique capabilities that surpass performance for competitive commercial products in the marketplace of which we are aware.
Competition
Within the USP laser and commercial high voltage markets there exists established companies which offer competitive products in our market segment. These competitors have substantial existing customer bases throughout the various worldwide markets.
Historically, substantially all of our activity and revenue was generated through contracts with agencies of the Government focused on military and national security applications. We have successfully developed, demonstrated, and advanced innovative directed-energy technologies. However, we face competition from other domestic companies within the defense industry and other companies with differing technologies that seek to provide similar benefits or address similar missions as our technologies. Additionally, foreign countries and companies may be developing technologies that may compete with our technologies.
Research and Development
We have historically funded our research and development primarily through internal investment and we diligently attempt to retain the sole ownership of all of the key intellectual property.
Our research and development expense was approximately $157,000 and $1,674,000 for 2012 and 2011, respectively. Our investment in internally funded research decreased during 2012 as we completed the building of prototypes in late 2011 and early 2012 for our USP lasers and nested high voltage generators. We expect our research and development efforts to remain at a reduced level as we do not intend to invest our own funds on further development and advancement of our LGE, LIPC, counter-IED and high voltage technologies.
Backlog of Orders
At December 31, 2012 and 2011, respectively, we had a backlog (i.e., work load remaining on signed contracts) of approximately $26,000 and $390,000, respectively, to be completed within the twelve months following those dates. As of March 18, 2013, our backlog was approximately $0.
Employees
As of December 31, 2012, we had 10 full time employees. The breakdown of the employees is as follows: two in executive management, one scientist, four in technical and engineering, one in manufacturing support and two in administrative functions including accounting and human resources. As of March 18, 2013, we had 9 full-time employees.
Risk factors
As filed, 41,549 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.
Future results of operations of Applied Energetics involve a number of known and unknown risks and uncertainties. Factors that could affect future operating results and cash flows and cause actual results to vary materially from historical results include, but are not limited to those risks set forth below:
Risk Related to Our Business
Our historical lack of earnings and continued future losses could adversely affect our financial health and prevent us from continuing to develop and market our products.
We do not have any funded Government contracts. Because Government agencies have been the dominant revenue source historically and many of these agencies continue to be identified as the intended customers for our various future products, it is uncertain whether we will enter into new or continue with existing development or production contracts and, if we do, what the timing or magnitude of such orders will be. In addition, the reduction in US forces in Afghanistan has really reduced the urgent need for our counter-IED system.
Our lack of earnings history and continued future losses could have important consequences, such as:
- increasing our vulnerability to general adverse economic and industry conditions;
- limiting our flexibility in planning for, or reacting to, changes in our business and our industry;
- restricting us from introducing new products or exploiting business opportunities; or delaying or terminating research projects;
- requiring us to sell debt or equity securities or to sell some of our core assets, possibly on unfavorable terms;
- limiting our ability to obtain additional financing; and
- placing us at a possible competitive disadvantage compared to our competitors, who may have greater financial resources.
We are exploring strategic alternatives which may change the nature of our business.
Because of the lack of government funding we are receiving, we have significantly reduced our work force and are seeking strategic alternatives. As a result, we may acquire one or more businesses or technologies which may or may not be related to our existing businesses and may dispose of one or more existing businesses.
Our independent auditors have expressed substantial doubt about our ability to continue as a going concern, which may hinder our ability to obtain future financing.
In their report accompanying our financial statements, our independent auditors stated that our financial statements for the year ended December 31, 2012 were prepared assuming that we would continue as a going concern, and that they have substantial doubt as to our ability to continue as a going concern. Our auditors have noted that our recurring losses from operations and negative cash flow from operations and the concern that we may incur additional losses due to the reduction in Government contract activity raise substantial doubt about our ability to continue as a going concern.
We do not intend to invest our own funds to further develop and enhance LGE, LIPC, or counter-IED technologies and systems and do not anticipate receiving Government funding in the near terms.
The cash proceeds received from our 2005 and 2006 equity financings have satisfactorily funded our operating losses, our research and development program and the launch of our new products, working capital requirements, and strategic initiatives. However we have limited financial resources.
The development, enhancement and modification of technologies and products requires the commitment of substantial resources to conduct the time consuming research and development, field training and regulatory activities necessary to bring any potential technology or product to market and to establish production, marketing and sales capabilities. We do not expect to invest our own funds to further develop and advance those technologies and systems.
Current economic conditions and uncertainty of future levels of defense spending has inhibited and will continue to inhibit our ability to obtain future funding from Government sources or from public capital sources consistent with our prior history. We do not expect that it is likely that we will receive additional Government funding for our LGE, LIPC, or counter-IED technologies and subsystems in the near term. As a result our revenues can be expected further decline and losses will continue for the foreseeable future.
The timing and magnitude of Government funding and orders for our technologies and systems cannot be predicted.
We do not have any funded Government contracts. Because Government agencies have been the dominant revenue source historically and many of these agencies continue to be identified as the intended customers for our various future products, it is uncertain whether we will enter into new or continue with existing development or production contracts and, if we do, what the timing or magnitude of such orders will be. In addition, the reduction in US forces in Afghanistan has really reduced the urgent need for our counter-IED system.
The receipt of future Government funding is uncertain and may be reduced or eliminated at any time, particularly if our LIPC technology does not meet certain milestones.
Due to federal budgetary constraints, we cannot provide assurance that any continued Government funding will be made available, or that we will be able to enter into any agreements with Government customers for the further development of LIPC, LGE and counter-IED technologies and systems. If additional Government funding for LIPC, LGE and counter-IED is reduced or is not forthcoming, in the absence of additional funding, our future technology development efforts would be terminated and our revenues would be adversely affected.
Our future success will depend on our ability to develop and commercialize technologies and applications that address the needs of our markets.
Both our defense and commercial markets are characterized by rapidly changing technologies and evolving industry standards. Accordingly, our future performance depends on a number of factors, including our ability to:
- identify emerging technological trends in our target markets;
- develop and maintain competitive products;
- enhance our products by improving performance and adding innovative features that differentiate our products from those of our competitors;
- develop and manufacture and bring products to market quickly at cost-effective prices;
- obtain commercial scale production orders from our Government and other customers;
- meet scheduled timetables and enter into suitable arrangements for the development, certification and delivery of new products; and
- enter into suitable arrangements for volume production of mature products.
We believe that, in order to be competitive in the future, we will need to continue to develop and commercialize technologies and products, which will require the investment of financial and engineering resources. However, we do not intend to invest our funds in the further development. Due to the design complexity of our products, we may in the future experience delays in completing development and introduction on a commercial scale of new products. Any delays could result in increased costs of development, deflect resources from other projects or incur loss of contracts.
In addition, there can be no assurance that the market for our technologies and products will develop or continue to expand as we currently anticipate. The failure of our technology to gain market acceptance could significantly reduce our revenue and harm our business. Furthermore, we cannot be sure that our competitors will not develop competing or differing technologies which gain market acceptance in advance of our products. The possibility that our competitors might develop new technology or products might cause our existing technology and products to become obsolete or create significant price competition. If we fail in our new product development and commercialization efforts or our products fail to achieve market acceptance more rapidly than our competitors, our revenue will decline and our business, financial condition and results of operations will be negatively affected.
The long sales cycles for our products may cause us to incur significant expense without offsetting revenues.
Our potential customers are likely to view the purchase of our products as a significant and strategic decision. As a result, we expect them to expend significant effort in evaluation, testing and qualifying our products before making a decision to purchase them, resulting in a lengthy initial sales cycle. While our customers are evaluating our products and before they place an order with us, we may incur substantial sales and marketing and research and development expenses to customize our products to the customers’ needs. We may also expend significant management efforts, increase manufacturing capacity and order long lead-time components or materials prior to receiving an order. Even after this evaluation, a potential customer may not purchase our products. As a result, these long sales cycles may cause us to incur significant expenses without ever receiving revenue to offset such expense.
Our commercial laser systems are complex in design and may contain defects that are not detected until installed and operated by our customers, which could increase our costs and reduce our revenues.
Laser systems are inherently complex in design and require ongoing regular maintenance. The manufacture of our lasers involves a highly complex and precise process. As a result of the technological complexity of our products, changes in our or our suppliers’ manufacturing processes or the inadvertent use of defective materials by us or our suppliers could result in a material adverse effect on our ability to achieve acceptable manufacturing yields and product reliability. To the extent that we do not achieve and maintain our projected yields or product reliability, our business operating results, financial condition and customer relationships would be adversely affected.
Our customers may discover defects in our products after the products have been fully installed and operated under the end user’s peak stress conditions. In addition, some of our products are combined with products from other vendors, which may contain defects. As a result, should problems occur, it may be difficult to identify the source of the problem. If we are unable to identify and fix defects or other problems, we could experience, among other things:
- loss of customers;
- increased costs of product returns and warranty expenses;
- damage to our brand reputation;
- failure to attract new customers or achieve market acceptance;
- diversion of development and engineering resources; and
- legal actions, including for personal injury and property damage, by our customers and/or their end users.
The occurrence of any one or more of the foregoing factors could seriously harm our business, financial condition and results of operations.
The commercial markets for our laser products are unpredictable and characterized by rapid technological changes and evolving standards demanding a significant investment in research and development, and, if we fail to address changing market conditions, our business and operating results will be harmed.
The photonics industry is characterized by extensive research and development, rapid technological change, frequent new product introductions, changes in customer requirements and evolving industry standards. Because this industry is subject to rapid change, it is difficult to predict its potential size or future growth rate. Our success in generating revenues in this industry will depend on, among other things:
- building our relationships with our customers;
- the education of potential end-user customers about the benefits of lasers and laser systems; and
- our ability to accurately predict, and develop our products to meet, industry standards.
We cannot assure you that our expenditures for research and development will result in the introduction of new products or, if such products are introduced, that those products will achieve sufficient market acceptance or to generate sales to offset the costs of development. Our failure to address rapid technological changes in our markets could adversely affect our business and results of operations.
We continuously evaluate the commercial viability of each of our technologies and, if we determine that the commercial viability of a technology is not justified by the investment needed to generate meaningful revenues, we may determine to discontinue such efforts.
We depend on Government customers for substantially all of our revenue and changes in government spending could significantly impact our sales and profitability.
Approximately 90% of our revenue for both years ended December 31, 2012 and 2011 were from the U.S. Government and Government contractors. The current trend for the U.S. defense spending is decreasing, and is expected to be in a downward trend for the foreseeable future. We do not expect to receive Government funding for our LGE, LIPC, and counter-IED systems in the near term and expect our revenues to further decline and losses to continue for the foreseeable future.
A reduction in the quality of our relationship with the Government and defense agencies and/or a shift in Government funding could have severe consequences on our prospects and financial condition.
Any significant disruption or deterioration of our relationship with the Government or important agencies thereof could significantly reduce our revenue. Our Government programs must compete with programs managed by other defense contractors for a limited number of programs and for uncertain levels of funding. The development of our business will depend upon the continued willingness of the U.S. Government agencies to fund existing and new defense programs and, in particular, to continue to purchase our products and services. The Department of Defense may not focus its spending on technologies or missions relevant to our technologies and products.
Our competitors continuously engage in efforts to expand their business relationships with the Government which may be to our disadvantage and are likely to continue these efforts in the future. The Government may choose to use other defense contractors for its limited number of defense programs. In addition, the funding of defense programs also competes with non-defense spending of the Government. Budget decisions made by the Government are outside of our control and have long-term consequences for the size and structure of Applied Energetics. The shift in Government defense spending to other programs in which we are not involved and a reduction in Government defense spending generally has had and will continue to have severe consequences for our results of operations.
Government customers may terminate or modify our existing contracts, which would adversely affect our revenue.
There are inherent risks in contracting with the Government, including risks peculiar to the defense industry, which could have a material adverse effect on our business, financial condition or results of operations. Laws and regulations permit the Government to:
- terminate contracts for its convenience;
- reduce or modify contracts if its requirements or budgetary constraints change;
- cancel multi-year contracts and related orders if funds for contract performance for any subsequent year become unavailable;
- shift its spending practices; and
- adjust contract costs and fees on the basis of audits done by its agencies.
If the Government terminates our contracts for convenience, we may only recover our costs incurred or committed for settlement expenses and profit on work completed before the termination. The Government regularly reviews our costs and performance on its contracts, as well as our accounting and general business practices. The Government may reduce the reimbursement for our fees and contract-related costs as a result of an audit. Also, we can give no assurance that we would be able to procure new Government contracts to offset the revenue lost as a result of any termination of our contracts. As our revenue is dependent on our procurement, performance and payment under our contracts, the loss of one or more critical contracts could have a negative impact on our financial condition.
Our business is subject to various restrictive laws and regulations because we are a contractor and subcontractor to the Government.
As a contractor and subcontractor to the Government, we are subject to various laws and regulations that are more restrictive than those applicable to non-Government contractors. We are required to obtain and maintain material Governmental authorizations and approvals to run our business as it is currently conducted. New or more stringent laws or Government regulations concerning Government contracts, if adopted and enacted, could have a material adverse effect on our business.
Generally, Government contracts are subject to oversight audits by Government representatives. Responding to Governmental audits, inquiries or investigations may involve significant expense and divert management attention from regular operations. Our Government business is also subject to specific procurement regulations and a variety of socio-economic and other requirements. These requirements, although customary in Government contracts, increase our performance and compliance costs. These costs might increase in the future, reducing our margins, which could have a negative effect on our financial condition. Failure to comply with these regulations and requirements could lead to suspension or debarment, for cause, from Government contracting or subcontracting for a period of time. Among the causes for debarment are violations of various statutes, including those related to:
- procurement integrity;
- export control;
- Government security regulations;
- employment practices;
- protection of the environment;
- accuracy of records and the recording of costs; and
- foreign corruption.
Any of these factors, which are largely beyond our control, could also negatively impact our financial condition. We also may experience problems associated with advanced designs required by the Government, which may result in unforeseen technological difficulties and cost overruns. Failure to overcome these technological difficulties and the occurrence of cost overruns would have a negative impact on our results.
Government contracts may be subject to protest or challenge by unsuccessful bidders or to termination, reduction or modification in the event of changes in Government requirements, reductions in federal spending or other factors.
Competition within our markets may reduce our procurement of future contracts and our revenue.
The defense and commercial industries in which we operate are highly competitive. Our competitors range from highly resourceful small concerns, which engineer and produce specialized items, to large, diversified firms and defense contractors. Many of our potential competitors have more extensive or more specialized engineering, manufacturing and marketing capabilities and greater financial resources than we do. Consequently, these competitors may be better suited to take advantage of economies of scale and devote greater resources to develop new technologies. There can be no assurance that we can continue to compete effectively with these firms. In addition, some of our suppliers and customers could develop the capability to manufacture products similar to products that we are developing. This would result in competing directly which could significantly reduce our revenue and seriously harm our business.
There can be no assurance that we will be able to compete successfully against our current or future competitors or that the competitive pressures we face will not result in reduced revenue and market share or seriously harm our business.
We have historically derived a substantial portion of our revenue from a limited number of contracts. Therefore, our revenue will continue to be adversely affected if we fail to receive new contracts and renewals or follow-on contracts.
During the year ended December 31, 2012, we derived approximately 43% of our revenues from our U.S. Air Force contract to develop a compact, high power, pulse generator to be used as a High Power Microwave (HPM) power supply. Additionally, 90% of our revenue was derived from only six Government contracts. The loss of Government funding has adversely affected our revenue and, as a result, we anticipate revenue may continue to decline and losses to continue for at least the foreseeable future.
Our products may fail to perform satisfactorily in tests or field operations and even if our products perform satisfactorily, we may experience unanticipated delays in obtaining contracts, and may not obtain commercial scale production orders.
Our Government customers typically test our products at various stages of development and through operational assessments. Our success will ultimately depend upon our products meeting performance criteria established by our customers. Failure of a product to perform satisfactorily in a field test or during operations could result in delay of product development, delay in production contracts, cost overruns, or termination of the contract, or our inability to obtain commercial scale production orders, any of which could materially affect the development and manufacturing of such product and our prospects, revenue and financial condition.
We depend on component availability, subcontractor performance and our key suppliers to manufacture and deliver our products and services.
Our manufacturing operations are highly dependent upon the delivery of materials by outside suppliers in a timely manner. In addition, we depend in part upon subcontractors to assemble major components and subsystems used in our products in a timely and satisfactory manner. If these subcontractors are not willing to contract with us on competitive terms or devote adequate resources to fulfill their obligations to us, or we do not properly manage these relationships, our existing customer relationships may suffer. In addition, by undertaking these activities, we run the risks that:
- the reputation and competitiveness of our products and services may deteriorate as a result of the reduction of our control over quality and delivery schedules and the consequent risk that we will experience supply interruptions and be subject to escalating costs; and
- our competitiveness may be harmed by the failure of our subcontractors to develop, implement or maintain manufacturing methods appropriate for our products and customers.
Moreover, because most of our contracts are with Governmental agencies, we may be limited in the third parties we can engage as component manufacturers due to security clearance requirements.
We are dependent for some purposes or product on sole-source suppliers. If any of these sole-source suppliers fails to meet our needs, we may not have readily available alternatives. Our inability to fill our supply needs could jeopardize our ability to satisfactorily and timely complete our obligations under Government and other contracts. This might result in reduced revenue, termination of one or more of these contracts and damage to our reputation and relationships with our customers. We cannot be sure that materials, components, and subsystems will be available in the quantities we require, if at all.
Because the manufacturing process of our products is highly complex, errors, changes or uncertainties could disrupt production.
The manufacture of our products involves highly complex and precise processes, requiring production in a highly controlled environment. Inadvertent or slight changes or uncertainties in our manufacturing processes, errors or use of defective or contaminated materials could impact our ability to achieve and affect product reliability, or disrupt and/or delay production.
Our business could be adversely affected by a negative audit by the U.S. Government.
Government agencies such as the Defense Contract Audit Agency ("DCAA") routinely audit and investigate Government contractors. These agencies review a contractor's performance under its contracts, cost structure and compliance with applicable laws, regulations and standards. The DCAA also reviews the adequacy of, and a contractor's compliance with, its internal control systems and policies, including the contractor's purchasing, property, estimating, compensation and management information systems. Any costs found to be improperly allocated to a specific contract will not be reimbursed, while such costs already reimbursed must be refunded. If an audit uncovers improper or illegal activities, we may be subject to civil and criminal penalties and administrative sanctions, including termination of contracts, forfeiture of profits, suspension of payments, fines and suspension or prohibition from doing business with the Government. In addition, our reputation would suffer serious harm if allegations of impropriety were made against us.
We depend on the recruitment and retention of qualified personnel, and failure to attract and retain such personnel could seriously harm our business.
Due to the specialized nature of our businesses, our future performance is highly dependent upon the continued services of our key engineering and scientific personnel. To the extent we obtain Government contracts or significant commercial contract our prospects depend upon our ability to attract and retain qualified engineering, scientific and manufacturing personnel for our operations. Competition for personnel is intense, and we may not be successful in attracting or retaining qualified personnel. Our failure to compete for these personnel could seriously harm our business, results of operations and financial condition. Additionally, since the majority of our business has historically involved technologies that are classified due to national security reasons, we must hire U.S. Citizens who have the ability to obtain a security clearance. This further reduces our potential labor pool.
Because many of our contracts and projects to date were classified for national security reasons, we may not be able to provide important information to the public.
To date, a majority of our revenue has been derived from contracts which are classified by the Government for national security reasons. Therefore, we are prohibited from filing these contracts as exhibits to our SEC reports, registration statements and filings or provide more than the summary information that we provide in our reports, registration statements and other filings with the SEC and in our press releases. The specific aspects of our technologies are highly sensitive to ongoing military operations and are largely classified under specific Department of Defense guidelines and, consequently, cannot be disclosed publicly. Such absence of explanation, detail and discussion may prohibit us from providing details that an investor may find meaningful, cause many individuals and investors to question our level of disclosure and discourage potential investors from investing in our securities. Accordingly, investors may not have important information concerning our businesses and operations with which to make an informed investment decision.
The U.S. Government's royalty-free right to use technology developed by us limits our intellectual property rights.
We seek to protect the competitive benefits we derive from our patents, proprietary information and other intellectual property. However, we do not have the right to prohibit the U.S. Government from using certain technologies developed or acquired by us or to prohibit third party companies, including our competitors, from using those technologies in providing products and services to the U.S. Government. The U.S. Government has the right to royalty-free use of technologies that we have developed under Government contracts. We are free to commercially exploit those Government-funded technologies and may assert our intellectual property rights to seek to block other non-Government users thereof, but we cannot assure you we could successfully do so.
We are subject to Government regulation which may require us to obtain additional licenses and could limit our ability to sell our products outside the United States.
We may be unable to adequately protect our intellectual property rights, which could affect our ability to compete.
Protecting our intellectual property rights is critical to our ability to compete and succeed as a company. We hold a number of United States patents and patent applications, as well as trademark, and registrations which are necessary and contribute significantly to the preservation of our competitive position in the market. There can be no assurance that any of these patents or future patent applications and other intellectual property will not be challenged, invalidated or circumvented by third parties. In some instances, we have augmented our technology base by licensing the proprietary intellectual property of others. In the future, we may not be able to obtain necessary licenses on commercially reasonable terms. We enter into confidentiality and invention assignment agreements with our employees, and enter into nondisclosure agreements with our suppliers and appropriate customers so as to limit access to and disclosure of our proprietary information. These measures may not suffice to deter misappropriation or independent third party development of similar technologies. Moreover, the protection provided to our intellectual property by the laws and courts of foreign nations may not be as advantageous to us as the remedies available under United States law.
We may face claims of infringement of proprietary rights.
There is a risk that a third party may claim our products infringe on their proprietary rights. Whether or not our products infringe on proprietary rights of third parties, infringement or invalidity claims may be asserted or prosecuted against us and we could incur significant expense in defending them. If any claims or actions are asserted against us, we may be required to modify our products or obtain licenses on commercially reasonable terms, which we may be unable to do in a timely manner or at all. Our failure to do so could adversely affect our business.
Our operations expose us to the risk of material environmental liabilities.
We are also subject to increasingly stringent laws and regulations that impose strict requirements for the proper management, treatment, storage and disposal of hazardous substances and wastes, restrict air and water emissions from our testing and manufacturing operations, and require maintenance of a safe workplace. These laws and regulations can impose substantial fines and criminal sanctions for violations, and require the installation of costly pollution control equipment or operational changes to limit pollution emissions and/or decrease the likelihood of accidental hazardous substance releases. We incur, and expect to continue to incur, capital and operating costs to comply with these laws and regulations. In addition, new laws and regulations, stricter enforcement of existing laws and regulations, the discovery of previously unknown contamination or the imposition of new clean-up requirements could require us to incur costs in the future that would have a negative effect on our financial condition or results of operations.
Our growth is subject to a number of economic risks.
Our business has been adversely affected by decreases in the general level of economic activity, such as decreases in defense spending, financial strength of customers and government procurement. We are unable to predict the duration and severity of disruptions in financial markets and the adverse economic conditions and continuation in Government fiscal tightening that might occur and the effect such events might have on our business
The unpredictability of our results may harm the trading price of our securities, or contribute to volatility.
Our operating results may vary significantly over time for a variety of reasons, many of which are outside of our control, and any of which may harm our business. The value of our securities may fluctuate as a result of considerations that are difficult to forecast, such as:
- the size and timing of contract receipt and funding;
- changes in Government policies and Government budgetary policies;
- termination or expiration of a key Government contract;
- our ability and the ability of our key suppliers to respond to changes in customer orders;
- timing of our new product introductions and the new product introductions of our competitors;
- adoption of new technologies and industry standards;
- competitive factors, including pricing, availability and demand for competing products, and fluctuations in foreign currency exchange rates;
- conditions in the capital markets and the availability of project financing;
- the ability to hire and retain key scientists and executives and/or appropriately trained and experienced staff;
- regulatory developments;
- general economic conditions;
- changes in the mix of our products;
- cost and availability of components and subsystems; and
- price erosion.
We are subject to the penny stock rules adopted by the Securities and Exchange Commission that require brokers to provide extensive disclosure to their customers prior to executing trades in penny stocks. These disclosure requirements may cause a reduction in the trading activity of our common stock, which in all likelihood would make it difficult for our stockholders to sell their securities.
Rule 3a51-1 of the Securities Exchange Act of 1934 establishes the definition of a “penny stock,” for purposes relevant to us, as any equity security that has a minimum bid price of less than $5.00 per share or with an exercise price of less than $5.00 per share, subject to a limited number of exceptions which are not available to us. This classification would severely and adversely affect any market liquidity for our common stock.
For any transaction involving a penny stock, unless exempt, the penny stock rules require that a broker or dealer approve a person’s account for transactions in penny stocks and the broker or dealer receive from the investor a written agreement to the transaction setting forth the identity and quantity of the penny stock to be purchased. In order to approve a person’s account for transactions in penny stocks, the broker or dealer must obtain financial information and investment experience and objectives of the person and make a reasonable determination that the transactions in penny stocks are suitable for that person and that that person has sufficient knowledge and experience in financial matters to be capable of evaluating the risks of transactions in penny stocks.
The broker or dealer must also deliver, prior to any transaction in a penny stock, a disclosure schedule prepared by the SEC relating to the penny stock market, which, in highlight form, sets forth:
- The basis on which the broker or dealer made the suitability determination; and
- That the broker or dealer received a signed, written agreement from the investor prior to the transaction
Disclosure also has to be made about the risks of investing in penny stocks in both public offerings and in secondary trading and commission payable to both the broker-dealer and the registered representative, current quotations for the securities and the rights and remedies available to an investor in cases of fraud in penny stock transactions. Finally, monthly statements have to be sent disclosing recent price information for the penny stock held in the account and information on the limited market in penny stocks.
Because of these regulations, broker-dealers may not wish to engage in the above-referenced necessary paperwork and disclosures and/or may encounter difficulties in their attempt to sell shares of our common stock, which may affect the ability of selling stockholders or other holders to sell their shares in any secondary market and have the effect of reducing the level of trading activity in any secondary market. These additional sales practice and disclosure requirements could impede the sale of our common stock, if and when our common stock becomes publicly traded. In addition, the liquidity for our common stock may decrease, with a corresponding decrease in the price of our common stock. Our common stock, in all probability, will be subject to such penny stock rules for the foreseeable future and our stockholders will, in all likelihood, find it difficult to sell their shares of common stock.
A large number of shares of our common stock could be sold in the market in the near future, which could depress our stock price.
As of March 18, 2013, we had outstanding approximately 92 million shares of common stock. A substantial portion of our shares are currently freely trading without restriction under the Securities Act of 1933, having been held by their holders for over one year and are eligible for sale under Rule 144(k) of the Securities Act
Provisions of our corporate charter documents could delay or prevent change of control.
Our Certificate of Incorporation authorizes our Board of Directors to issue up to 2,000,000 shares of "blank check" preferred stock without stockholder approval, in one or more series and to fix the dividend rights, terms, conversion rights, voting rights, redemption rights and terms, liquidation preferences, and any other rights, preferences, privileges, and restrictions applicable to each new series of preferred stock. In addition, our Certificate of Incorporation divides our board of directors into three classes, serving staggered three-year terms. At least two annual meetings, instead of one, will be required to effect a change in a majority of our board of directors. The designation of preferred stock in the future, the classification of our Board of Directors, its three classes and the rights agreement could make it difficult for third parties to gain control of our company, prevent or substantially delay a change in control, discourage bids for our common stock at a premium, or otherwise adversely affect the market price of our common stock. Moreover, the holders of our outstanding Series A Preferred Stock have a right to put their shares to the Company for $2.7 million in the event of a change of control. Such right could hinder our ability to sell our assets or merge with another company.
The redemption and dividend provisions of our outstanding preferred stock are onerous due to our current financial condition.
As of December 31, 2012, the liquidation preference of our outstanding preferred stock was approximately $2.7 million which represents approximately 92% of our total assets. If an event occurs that would require us to redeem the preferred stock, we may not have the required cash to do so.
In addition, our annual dividend payment on the preferred stock is approximately $174,000, which will further deplete our cash or significantly dilute our common stockholders of we pay the dividend in shares of common stock.
We use estimates in accounting for many of our programs and changes in our estimates could adversely affect our future financial results.
Contract accounting requires judgments relating to assessing risks, including risks associated with customer directed delays and reductions in scheduled deliveries, unfavorable resolutions of claims and contractual matters, judgments associated with estimating contract revenues and costs, and assumptions for schedule and technical issues. The estimation of total revenues and cost at completion is complicated and subject to many variables. Because of the significance of the judgments and estimation processes, it is likely that materially different amounts could be recorded if we used different assumptions or if the underlying circumstances were to change. Changes in underlying assumptions, circumstances or estimates may adversely affect our future results of operations and financial condition, including requiring us to take write downs or charges in certain periods, and could result in fluctuations in our operating results.
The commercial products and systems that we sell are considered capital equipment and the company’s financial condition may preclude future sales due to perceived risk for service and warranties.
Both our commercial laser systems and compact high voltage equipment are expected to be major capital equipment purchases for industrial manufacturing. Companies evaluate these systems based upon a number of factors and criteria which include the ability of suppliers to provide long-term warranty, maintenance, technical and parts support. The company’s present financial condition may be viewed as an impediment to providing long-term customer service for these major capital equipment purchases.
Properties
As filed, 864 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.
In August 2102, we entered into 1-year agreements to lease approximately 3,700 square feet of office and manufacturing space and approximately 2,300 square feet of storage space in Tucson, Arizona.
In September 2012, we closed on the sale of the office, manufacturing and storage facility that we have occupied since our inception in 2002. The building represented a sizable asset which was much larger than that required to support our present operations.
Our aggregate rent expense, including common area maintenance costs, was approximately $23,000 and $97,000 for 2012 and 2011, respectively.
We believe our facilities are adequate for our currently expected level of operations.
See Note 11 to our 2012 Consolidated Financial Statements, which is incorporated herein by reference for information with respect to our lease commitments at December 31, 2012.
Legal proceedings
As filed, 191 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.
The previously reported litigation with NewOak Capital Markets LLC was dismissed with prejudice on February 16, 2012 pursuant to a settlement agreement which required our payment of $200,000.
Management's discussion and analysis
As filed, 20,885 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.
You should read the following management discussion and analysis (“MD&A”) together with the risk factors set forth in Item 1A and with our audited Consolidated Financial Statements and Notes thereto included elsewhere herein.
Overview
Applied Energetics, Inc. (“company”, “Applied Energetics”, “we”, “our” or “us”) designs, develops and manufactures solid state Ultra Short Pulse (USP”) lasers for commercial applications and applied energy systems for military applications. Through our technology development efforts, we have gained expertise and proprietary knowledge in high performance lasers and high-voltage electronics. We have suspended the majority of our Government work due to the lack of Government funding.
High-Voltage Technologies
We have acquired and developed unique high-voltage capabilities focused on providing high-voltage solutions for semiconductor, aerospace, chemical processing, and other military and commercial activities. Opportunities currently in process or under development include advanced electron-beam technologies, nested high-voltage generators and other unique power solutions for use in a wide range of commercial and military applications. We believe our electron beam technologies are more compact than competitive technologies and offer customers a capable solution for applications that require less space for implementation.
LGE and LIPC® Technologies
Upon our inception in 2002, we began developing LGE and LIPC technologies intended to precisely deliver high voltage electrical charges by using a laser to create a conductive path in the atmosphere. We have protected what we believe to be the enabling intellectual property through U.S. Patent filings. LGE development has been funded through multiple Department of Defense (“DoD”) contracts in support of U.S. Navy, Army, Air Force, and the Office of Secretary of Defense programs, as well as through internally funded research initiatives.
We have completed all contracted work authorized under our contract with the U. S. Army’s Research, Development and Engineering Command (“ARDEC”). We continue to respond to ARDEC requests for proposal on contracts for development of our LGE technology; however, there is no assurance that a contract will be awarded.
Counter-IED Technologies
We have developed and delivered a system that demonstrated significant capability in over 200 missions in Afghanistan countering IEDs from mid-2009 through early 2011.
Critical Accounting Policies
Use of Estimates
The preparation of consolidated financial statements in conformity with United States generally accepted accounting principles requires management to make estimates, judgments and assumptions that affect the amounts reported in the financial statements and accompanying notes. Management bases its assumptions on historical experiences and on various other inputs and estimates that it believes to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. In addition, management considers the basis and methodology used in developing and selecting these estimates, the trends in and amounts of these estimates, specific matters affecting the amount of and changes in these estimates, and any other relevant matters related to these estimates, including significant issues concerning accounting principles and financial statement presentation. Such estimates and assumptions could change in the future as more information becomes known which could impact the amounts reported and disclosed herein. Significant estimates include revenue recognition under the percentage of completion method of contract accounting, estimate to forecast loss on contracts under the completed contract method of accounting, the valuation of inventory, estimates of long-lived asset value, and estimate to forecast expected forfeiture rate on stock-based compensation and stock-based compensation expense.
Revenue Recognition
Revenue has been derived from ongoing contract work for systems development, effects testing and the design and development of demonstration systems and sub-systems for our Government and commercial customers. This work is expected to be generally performed under cost-plus contracts with Government customers.
Revenue under long-term Government contracts is generally recorded under the percentage of completion method. Revenue, billable monthly, under cost plus fixed fee contracts is recorded as costs are incurred and includes estimated earned fees in the proportion that costs incurred to date bear to total estimated costs. Costs include direct labor, direct materials, subcontractor costs and overhead. General and administrative expenses allowable under the terms of the contracts are allocated per contract depending on its direct labor and material proportion to total direct labor and material of all contracts. As contracts can extend over one or more accounting periods, revisions in earnings estimated during the course of work are reflected during the accounting period in which the facts become known. When the current contract estimate indicates a loss, a provision is made for the total anticipated loss in the period in which the facts become known. Management evaluates many variables and makes various assumptions related to the estimation of total cost of completion of long-term contracts. Management reviews the progress and performance of all contracts monthly.
The asset caption “accounts receivable” includes costs and estimated earnings in excess of billings on uncompleted contracts, which represents revenue recognized in excess of amounts billed. Such revenue is billable under the terms of the contracts at the end of the year, yet was not invoiced until January, 2013, and is generally expected to be collected within one year. The liability “billings in excess of costs and estimated earnings on uncompleted contracts” represents billings in excess of revenue recognized.
Revenue for other products and services is recognized when such products and services are delivered or performed and, in connection with certain sales to certain customers, when the products and services are accepted, which is normally negotiated as part of the initial contract. Revenue from commercial, non-Governmental customers has historically been based on fixed price contracts where the sale is recognized upon acceptance of the product or performance of the service and when payment is probable. Contract costs are accumulated in the same manner as inventory costs and are charged to operations as the related revenue from contract is recognized. When the current contract estimate indicates a loss, a provision is made for the total anticipated loss in the period in which the facts become known.
Inventories
Inventories include material, direct labor and related manufacturing and administrative overhead and are stated at the lower-of-cost (determined on a weighted average basis) or market for raw materials and work-in-process inventory. When actual contract cost and the estimate to complete exceed the estimated contract revenues, a loss provision is recorded. Due to the nature of our inventory, we analyze inventory on an item-by-item basis compared to future usage and sales for obsolescence quarterly.
Share-Based Payments
Stock-based compensation cost is measured at grant date, based on the fair value of the award, and is recognized as an expense over the requisite service period.
The fair value of each option grant is estimated at the date of grant using the Black-Scholes-Merton option valuation model. We make the following assumptions relative to this model: (i) the annual dividend yield is zero as we do not pay dividends on our common stock, (ii) the weighted-average expected life is based on a midpoint scenario, where the expected life is determined to be half of the time from grant to expiration, regardless of vesting, (iii) the risk free interest rate is based on the U.S. Treasury security rate for the expected life, and (iv) the volatility is based on the level of fluctuations in our historical share price for a period equal to the weighted-average expected life. We estimate forfeitures when recognizing compensation expense and adjust this estimate over the requisite service period should actual forfeitures differ from such estimates. Changes in estimated forfeitures are recognized through a cumulative adjustment, which is recognized in the period of change and which impacts the amount of unamortized compensation expense to be recognized in future periods.
Recoverability of Property and Equipment
We assess recoverability of property and equipment whenever events or changes in circumstances indicate that the carrying value of an asset may not be recoverable.
We assess the recoverability of property and equipment by determining whether the amortization of the balances over their remaining lives can be recovered through undiscounted future operating cash flows. The amount of impairment, if any, is measured based on projected discounted future operating cash flows. The assessment of the recoverability of long-lived assets will be impacted if estimated future operating cash flows are not achieved.
Income Taxes
Deferred tax assets and liabilities are recognized currently for the future tax consequences attributable to the temporary differences between the financial statement carrying amounts of assets and liabilities and their respective tax basis. Deferred tax assets and liabilities are measured using enacted tax rates in effect for the year in which those temporary differences are expected to be recovered or settled. A valuation allowance is recorded to reduce the carrying amounts of deferred tax assets if it is more likely than not that such assets will not be realized.
Results of Operations
Our consolidated financial information for the years ending December 31, 2012, and 2011 is as follows:
| 2012 | 2011 | |
|---|---|---|
| Revenue | $1,335,421 | $5,070,156 |
| Cost of revenue | 1,148,906 | 4,793,181 |
| General and administrative | 2,757,510 | 3,811,028 |
| Selling and marketing | 776,054 | 1,151,213 |
| Research and development | 157,313 | 1,674,158 |
| Other (expense) income: | ||
| Interest expense | (1,651) | (4,156) |
| Interest income | 2,536 | 3,477 |
| Loss before provision for income taxes | (3,503,477) | (6,360,103) |
| Provision (benefit) for income taxes | - | - |
| Net loss | $(3,503,477) | $(6,360,103) |
Revenue
Revenue decreased approximately $3.7 million to $1.3 million for the year ended December 31, 2012 compared to 2011 primarily as a result of the reduction in Government spending on our technologies. Our counter-IED revenue decreased by $2.2 million to $0 in 2012; as we completed all deliverables and testing required under our contract with the USMC in the second quarter of 2011. LGE revenue decreased by $1.5 million to $633,000 as we exhausted the available funding under our contract with ARDEC. Additionally, our USP Laser revenues decreased by $181,000 for the year ended 2012 due to the delivery of our USP Laser to the Navy in June of 2011. Offsetting these decreases in revenue was an increase in our HV revenue of $112,000 for the year ended 2012.
Cost of Revenue
Cost of revenue includes manufacturing labor, benefits and overhead, and an allocation of allowable general and administration and research and development costs in accordance with the terms of our government contracts.
Cost of revenue decreased by $3.6 million for the year ended December 31, 2012 compared to 2011. The decrease in cost of revenue is directly tied to the decrease in sales activity of approximately 74%. Cost of revenue as a percentage of revenue improved to 86% from 95% last year.
General and Administrative
General and administrative expenses decreased approximately $1.1 million for the year ended December 31, 2012 compared to 2011. Salaries and wages decreased by approximately $2.3 million, professional services decreased by approximately $1.3 million, employee benefits decreased by approximately $491,000, supplies and building related expenses decreased by approximately $458,000, non-cash compensation costs decreased by approximately $185,000, insurance and miscellaneous fees decreased by approximately $162,000 and depreciation and amortization decreased by approximately $145,000. Offsetting these reductions in operating expenses was a decrease in absorption of labor and overheads of approximately $3.5 million previously charged to government contracts because our staffing exceeded our operational requirements as a result of the reduced volume of government contract business. These reductions reflect the various cost saving measures implemented in 2011 and continuing through 2012 to compensate for the decrease in government revenues; which included reducing our workforce, exiting our leased facilities, and reductions in other operating expenses.
At December 31, 2012, there were approximately $44,000 of unrecognized compensation costs related to unvested restricted stock awards. The costs for restricted stock awards are expected to be recognized on a weighted-average basis over approximately one year.
Selling and Marketing
Selling and marketing expenses decreased by approximately $375,000 for the year ended December 31, 2012 compared to 2011. The decrease was mostly due to the reduction of workforce as well as the reduction of our bid and proposal activity in 2012.
Research and Development
Research and development expenses decreased approximately $1.5 million for the year ended December 31, 2012 compared to 2011. Our investment in internally funded research decreased during 2012 as we completed the building prototypes at the end of 2011 and early 2012.
Other Income (Expense)
Other income (expense) primarily consists of interest income and interest expense. Net interest income for 2012 was higher by approximately $2,000 from 2011 primarily due to the lower financing costs incurred in 2012.
Net Loss
Our operations in 2012 resulted in a net loss of approximately $3.5 million, a decrease of approximately $2.9 million compared to the approximately $6.4 million net loss for 2011. Our net loss attributable to common stockholders per common share – basic and diluted decreased from approximately $0.07 per share to $0.04 per share due to the decrease of net loss.
Inflation and Seasonality
We do not believe that inflation has a material effect on the operations or financial condition of our business, nor do we believe that we are subject to significant seasonal swings in our business.
Trend Discussion
We expect revenues for 2013 to further decline due to the unresolved issues regarding the Federal Budget and how deficit reduction will affect the budgets of our Government customers.
As a result, to reduce our cost of revenue, research and development and general and administrative expenses, we have made a strategic decision not to invest internal funds on the further development and advancement of our LGE, LIPC, counter-IED and high voltage systems and have reduced our work force to a level consistent with our expected operations.
Liquidity and Capital Resources
At December 31, 2012, we had approximately $2.6 million of cash and cash equivalents, a decrease of approximately $1.3 million from December 31, 2011. In 2012, we used approximately $2.6 million in operating activities. This amount is comprised primarily of our net loss of $3.5 million and decreases in our accrued expenses and deposits of $754,000, accounts payable of $201,000 and net gain on equipment disposal of $119,000, partially offset by the $720,000 loss on building and land sold, $447,000 decrease in accounts receivables, $205,000 decrease in long term receivables, $193,000 depreciation and amortization and $147,000 decrease in prepaid expenses, deposits and other assets. Investing activities resulted in net cash inflow of approximately $1.5 million, resulting primarily from the sale of our building and financing activities resulted in net cash outflow of approximately $174,000.
The fiscal year 2012 Department of Defense budget was approved in January of 2012. This budget and the President’s proposed budget for 2013 reflect significant reductions in research and development funding for the foreseeable future. This area has historically generated greater than 90% of revenues. We have suspended the majority of our Government work due to the lack of Government funding, therefore we expect to continue having significantly reduced revenues from the US Government. Furthermore, it is expected that revenue generated from commercial sales of our new USP laser and High Voltage systems will not become significant for at least the next twelve months as these products gain market acceptance. The combination of these conditions will cause further depletion our cash reserves during the transition to commercialize our USP laser technologies. We are considering strategic alternatives, including mergers, the acquisition of one or more businesses or technologies, and/or the disposition of one or more of our existing businesses.
Our continuance in business beyond 2013 is dependent on successful development of new commercial customers and sales of our USP laser systems and high voltage systems, obtaining profitable operations and additional financing necessary to fund our operations. Additional contracts from our Department of Defense customers, if available and substantial, may assist in funding our operations and contribute to our overall cash flow.
In their report accompanying our financial statements, our independent auditors stated that our financial statements for the year ended December 31, 2012 were prepared assuming that we would continue as a going concern, and that they have substantial doubt as to our ability to continue as a going concern. Our auditors’ have noted that our recurring losses from operations and negative cash flow from operations and the concern that we may incur additional losses due to the reduction in Government contract activity raise substantial doubt about our ability to continue as a going concern.
Backlog
At December 31, 2012 and 2011, we had a backlog (i.e., work load remaining on signed contracts) of approximately $26,000 and $390,000, respectively, to be completed within the twelve months following those dates. As of March 18, 2013, our backlog was approximately $0.0.
Contractual Obligations:
The following table summarizes our contractual obligations and other commercial commitments as of December 31, 2012:
| Payment by Period Total | Less than 1 Year | |
|---|---|---|
| Operating leases | $20,288 | $20,288 |
| Total | $20,288 | $20,288 |
Not included in the above table are the dividends on our Series A Preferred Stock that are approximately $174,000 each year (approximately $43,000 each quarter), assuming no conversion of the outstanding shares of Series A Preferred Stock into shares of common stock.
Operating Leases
We have, in the past, operated in leased premises under operating leases. Total rent expense on premises amounted to approximately $23,000 and $97,000 for 2012 and 2011, respectively.
Preferred Stock
The Series A Preferred Stock has a liquidation preference of $25.00 per share. The Series A Preferred Stock bears dividends at the rate of 6.5% of the liquidation preference per share per annum, which accrues from the date of issuance, and is payable quarterly, when declared. The holders of the Series A Preferred Stock have a right to put the stock to the Company for an aggregate amount equal to the liquidation preference ($2.7 million) in the event of a change in control. Dividends are payable in: (i) cash, (ii) shares of our common stock (valued for such purpose at 95% of the weighted average of the last sales prices of our common stock for each of the trading days in the ten trading day period ending on the third trading day prior to the applicable dividend payment date), provided that the issuance and/or resale of all such shares of our common stock are then covered by an effective registration statement or (iii) any combination of the foregoing. As of December 31, 2012, there were 107,172 shares of Series A Preferred Stock outstanding.
Recent Accounting Pronouncements
Refer to Note 2 of Notes to Consolidated Financial Statements for a discussion of recent accounting standards and pronouncements.
Off-Balance Sheet Arrangements
As of December 31, 2012, we had no significant off-balance sheet arrangements other than operating leases. For a description of our operating leases, see Note 11 to the Consolidated Financial Statements.
Market risk
As filed, 937 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.
In the normal course of business, our financial position is subject to a variety of risks, such as the ability to collect our accounts receivable and the recoverability of the carrying values of our long-term assets. We do not presently enter into any transactions involving derivative financial instruments for risk management or other purposes.
Our available cash balances are invested in money market funds (invested primarily in Government Securities) with generally immediate liquidity. These short-term cash-like investments are subject to general interest rate and general market risks. However, lack of timely access to these funds or loss of any portion of principal could be catastrophic to the ongoing funding and health of our business. Substantially all of our cash flows are derived from our operations within the United States and today we are not subject to market risk associated with changes in foreign exchange rates.
Controls and procedures
As filed, 4,963 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.
Conclusion Regarding the Effectiveness of Disclosure Controls and Procedures
Our management, with the participation of our Principal Executive Officer and Principal Financial Officer, has evaluated the effectiveness of our disclosure controls and procedures as of December 31, 2012. The term “disclosure controls and procedures,” as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934 (the “Exchange Act”), means controls and other procedures of a company that are designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is recorded, processed, summarized and reported, within the time periods specified in the SEC's rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is accumulated and communicated to the company's management, including its principal executive and principal financial officers, as appropriate to allow timely decisions regarding required disclosure. Management recognizes that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving their objectives and management necessarily applies its judgment in evaluating the cost-benefit relationship of possible controls and procedures. Based on that evaluation our Principal Executive Officer and Principal Financial Officer concluded that our disclosure controls and procedures were effective as of December 31, 2012.
Management’s Report on Internal Control over Financial Reporting
Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Rules 13a-15(f) or 15d-15(f) under the Exchange Act. Internal control over financial reporting is a process designed by, or under the supervision of, our principal executive and principal financial officers and affected by our Board of Directors, management and other personnel, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. Internal control over financial reporting includes those policies and procedures that:
- pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the company's assets;
- provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of the management and directors of the company; and
- provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of the company's assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
Our management, including our Principal Executive Officer (”PEO”)and Principal Financial Officer (“PFO”), has conducted an assessment of the effectiveness of our internal control over financial reporting as of December 31, 2012, based on the framework established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (the COSO Framework). This assessment included an evaluation of the design of our internal control over financial reporting and testing of the operational effectiveness of those controls. Based on our assessment under the criteria described above, the PEO and PFO has concluded that our internal control over financial reporting was effective as of December 31, 2012.
This Annual Report on Form 10-K does not include an attestation report of our registered public accounting firm regarding internal controls over financial reporting. Management’s report was not subject to attestation by our registered public accounting firm pursuant to the SEC rules that permit smaller reporting companies to provide only management attestation in annual report on Form 10-K.
Changes in Internal Control Over Financial Reporting
There has been no change in Applied Energetics’ internal control over financial reporting for the quarter ended December 31, 2012 that materially affected, or is reasonably likely to materially affect our internal control over financial reporting.
Figures reported in this filing
Standardized line items from the XBRL in this filing, for the period ended 2012-12-31. Comparative periods it repeats are left out.
| Line item | Period | Value | XBRL concept |
|---|---|---|---|
| Revenue | 3 months2012-10-01 to 2012-12-31 | $119.9k | us-gaap:SalesRevenueNet |
| Gross profit | 3 months2012-10-01 to 2012-12-31 | −$10.7k | us-gaap:GrossProfit |
| Gross profit | 12 months2012-01-01 to 2012-12-31 | $186.5k | us-gaap:GrossProfit |
| Research and development | 12 months2012-01-01 to 2012-12-31 | $157.3k | us-gaap:ResearchAndDevelopmentExpense |
| Operating income | 3 months2012-10-01 to 2012-12-31 | −$545.5k | us-gaap:OperatingIncomeLoss |
| Operating income | 12 months2012-01-01 to 2012-12-31 | −$3.5m | us-gaap:OperatingIncomeLoss |
| Interest expense | 12 months2012-01-01 to 2012-12-31 | $1.7k | us-gaap:InterestExpense |
| Income tax | 12 months2012-01-01 to 2012-12-31 | $0 | us-gaap:IncomeTaxExpenseBenefit |
| Net income | 3 months2012-10-01 to 2012-12-31 | −$587.5k | us-gaap:NetIncomeLossAvailableToCommonStockholdersBasic |
| Net income | 12 months2012-01-01 to 2012-12-31 | −$3.5m | us-gaap:NetIncomeLoss |
| Diluted EPS | 3 months2012-10-01 to 2012-12-31 | −$0.01 | us-gaap:EarningsPerShareBasicAndDiluted |
| Diluted EPS | 12 months2012-01-01 to 2012-12-31 | −$0.04 | us-gaap:EarningsPerShareBasicAndDiluted |
| Operating cash flow | 12 months2012-01-01 to 2012-12-31 | −$2.6m | us-gaap:NetCashProvidedByUsedInOperatingActivities |
| Capital expenditure | 12 months2012-01-01 to 2012-12-31 | $15.1k | us-gaap:PaymentsToAcquirePropertyPlantAndEquipment |
| Cash and equivalents | At period end2012-12-31 | $2.6m | us-gaap:CashAndCashEquivalentsAtCarryingValue |
| Current assets | At period end2012-12-31 | $2.8m | us-gaap:AssetsCurrent |
| Total assets | At period end2012-12-31 | $2.9m | us-gaap:Assets |
| Current liabilities | At period end2012-12-31 | $333.9k | us-gaap:LiabilitiesCurrent |
| Total liabilities | At period end2012-12-31 | $333.9k | us-gaap:Liabilities |
| Shareholders' equity | At period end2012-12-31 | $2.6m | us-gaap:StockholdersEquity |
Source: SEC EDGAR, the filing index for accession 0001144204-13-018747. Last ingested by Listed: Nov 14, 2026, 15:45 ET. Listed shows no prices and gives no investment advice.