Listed

Ampco Pittsburgh Corp: Form 10-K for the period ended Dec 31, 2025

Filed with the SEC on Mar 16, 2026 and accepted by EDGAR at Mar 16, 2026, 17:09 ET.

Share

Business

As filed, 16,820 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

GENERAL DEVELOPMENT OF BUSINESS

Ampco-Pittsburgh Corporation (the “Corporation”) was incorporated in Pennsylvania in 1929. The Corporation, individually or together with its consolidated subsidiaries, is also referred to herein as the “Registrant.” The Corporation manufactures and sells highly engineered, high-performance specialty metal products and customized equipment utilized by industry throughout the world. It operates in two business segments: the *Forged and Cast Engineered Products (“*FCEP”) segment and the *Air and Liquid Processing (“*ALP”) segment. This segment presentation is consistent with how the Corporation’s chief operating decision maker evaluates financial performance and makes resource allocation and strategic decisions about the business.

On October 14, 2025, (the “Filing Date”), the Directors of Union Electric Steel UK Limited (“UES-UK”), an indirect wholly owned subsidiary of the Corporation, filed a Notice of Appointment with the High Court of Justice, Business and Property Courts at Leeds (the “Insolvency Court”) formally appointing certain insolvency practitioners of FRP Advisory Trading Limited (“FRP”) as administrators of UES-UK (collectively, the “Administrators”). This action was confined to UES-UK exclusively and did not affect the Corporation or any of its other subsidiaries. As of the Filing Date, UES-UK was in administration and its affairs, business and property were being managed by the Administrators (the “Structured Insolvency”). The Administrators have set out their proposals to UES-UK’s creditors, which include an orderly wind-down of UES-UK’s financial affairs and sale of its assets. In addition, during 2025, the Corporation closed its non-core steel distribution facility located in Ohio previously held by Alloys Unlimited and Processing, LLC (“AUP”). In December 2025, AUP was merged into Union Electric Steel Corporation, a direct wholly owned subsidiary of the Corporation. See Note 2, Exit and Deconsolidation Charges, to the Consolidated Financial Statements included in Item 8 to this Annual Report on Form 10-K (the “Consolidated Financial Statements”) for further information.

For the FCEP segment, global steel manufacturing capacity continues to exceed global consumption of steel products. Demand for steel is soft but stable. In 2025, as a result of low-priced products from other countries entering the United States, tariffs, as outlined under Section 232 of the Trade Expansion Act of 1962, were increased for products with domestic melt and pour requirements imported into the United States. In addition, in the third quarter of 2025, the U.S. government announced new tariffs on coated steel imported into the United States. According to U.S. Census Bureau and U.S. Commerce Department data, imports for 2025 have decreased when compared to 2024 with import reductions accelerating as the year progressed. This should result in increased utilization of our customers' domestic facilities. Similarly, we believe modified tariff and quota systems have been strengthened in Canada and Mexico to support their steel industries, which also should result in better utilization for our customers located in these countries. The primary focus for the FCEP segment for 2026 is to improve its profitability by maintaining a strong position in the roll market and continuing to improve operational efficiency and equipment reliability.

For the ALP segment, businesses are benefiting from increased demand in power generation and U.S. military markets and have successfully increased market share but continue to face increasing production costs due to inflation. The segment has been implementing price increases for its products to help mitigate these inflationary effects. The primary focus for the ALP segment for 2026 is to grow revenues, monitor and minimize inflationary and tariff effects, strengthen engineering and manufacturing capabilities to keep pace with growth opportunities, and continue to improve its sales distribution network.

The Corporation is actively monitoring, and will continue to actively monitor, changes prompted by the U.S. government, repercussions from the Middle East conflicts and similar geopolitical matters, economic conditions, and other developments relevant to its business, including the potential impact on its operations, financial condition, liquidity, suppliers, industry, and workforce.

NARRATIVE DESCRIPTION OF BUSINESS

Forged and Cast Engineered Products Segment

The FCEP segment produces forged hardened steel rolls, cast rolls and forged engineered products (“FEP”). Forged hardened steel rolls are used primarily in hot and cold rolling mills by producers of steel, aluminum and other metals. Cast rolls, which are produced in a variety of iron and steel qualities, are used mainly in hot strip mills, medium/heavy section mills, roughing mills, and plate mills. FEP principally are sold to customers in the steel distribution market, oil and gas industry, and the aluminum and plastic extrusion industries. The segment has operations in the United States, Sweden, Slovenia, and an equity interest in two joint venture companies in China. Collectively, the segment primarily competes with European, Asian, and North and South American companies in both domestic and foreign markets and operates several sales offices located throughout the world.

Union Electric Steel Corporation (“UES”) produces forged hardened steel rolls and FEP. It is headquartered in Carnegie, Pennsylvania, with three manufacturing facilities in Pennsylvania and one in Indiana. The following entities are direct or indirect operating subsidiaries of UES:

Åkers Sweden AB produces cast rolls in a variety of iron and steel qualities for hot strip mills, medium/heavy section mills, roughing mills, and plate mills. It is located in Åkers Styckebruk, Sweden.

Åkers Valji Ravne d.o.o. produces forged rolls for cluster mills and Z-Hi mills, work rolls for narrow and wide strip mills and aluminum mills, back-up rolls for narrow strip mills, and leveling rolls and shafts. It is located in Ravne, Slovenia.

The segment’s two joint venture companies in China include:

Shanxi Åkers TISCO Roll Co., Ltd. is a joint venture between Taiyuan Iron and Steel Co. Ltd. and Åkers AB, a non-operating subsidiary of UES, that produces cast rolls for hot strip mills, steckel mills and medium plate mills. It is located in Taiyuan, Shanxi Province, China. Åkers AB holds a 59.88% interest in the joint venture.

Anhui Baochang Roll Co., Ltd. is a joint venture among UES, Magang (Group) Holding Co., Ltd. and Jiangsu Gong-Chang Roll Co., Ltd. that produces large forged backup rolls for hot and cold strip mills. It is located in Maanshan, Anhui Province, China. Union Electric Steel (Hong Kong) Limited, a non-operating subsidiary of UES, holds a 33% interest in the joint venture.

Air and Liquid Processing Segment

The ALP segment includes Aerofin, Buffalo Air Handling and Buffalo Pumps, all divisions of Air & Liquid Systems Corporation (“Air & Liquid”), a wholly owned subsidiary of the Corporation. The segment has operations in Virginia and New York with its headquarters located in Carnegie, Pennsylvania. The segment utilizes an independent group of sales offices located throughout the United States and Canada and has several major competitors.

Aerofin Division of Air & Liquid Systems Corporation produces custom-engineered finned tube heat exchange coils and related heat transfer products for a variety of industries including original equipment manufacturers and commercial, nuclear power generation and industrial manufacturing. It is located in Lynchburg, Virginia.

Buffalo Air Handling Division of Air & Liquid Systems Corporation produces large custom-designed air handling systems for institutional (e.g., hospital, university), pharmaceutical and general industrial building markets. Its primary manufacturing facility is located in Amherst, Virginia and has a second assembly facility in Virginia.

Buffalo Pumps Division of Air & Liquid Systems Corporation manufactures centrifugal pumps for the fossil-fueled power generation, marine defense and industrial refrigeration industries. It is located in North Tonawanda, New York.

Products

In both segments, products are dependent on engineering, principally custom designed, and are sold to sophisticated commercial and industrial users located throughout the world. Products are delivered directly to the customer via third-party carriers or customer-arranged transportation. For the FCEP segment, one customer accounted for 10% of its net sales in 2025 and one customer accounted for 11% of its net sales in 2024. For the ALP segment, one customer accounted for 12% of its net sales in 2025 but no customers exceeded 10% of its net sales for 2024. While the Corporation believes is does not have a significant concentration of sales with any one customer consistently year-to-year, the loss of any of these more significant customers could have a material adverse effect on the respective segment. For additional information on the products produced and financial information about each segment, see Note 24, Business Segments, to the Consolidated Financial Statements.

Raw Materials

Raw materials used in both segments are generally available from many sources, and neither segment is dependent upon any single supplier for any raw material. Substantial volumes of raw materials used by each segment are subject to significant variations in price. The Corporation’s subsidiaries generally do not purchase or commit for the purchase of a major portion of raw materials significantly in advance of the time they require such materials but periodically make forward commitments for natural gas, electricity and certain commodities. See Note 16, Derivative Instruments, to the Consolidated Financial Statements.

Patents and Trademarks

While the Corporation and its subsidiaries hold certain patents, trademarks and licenses, in the opinion of the Corporation, they are not material to either segment.

Backlog

The backlog of orders at December 31, 2025 approximated $328.9 million compared to a backlog of $378.9 million at December 31, 2024. Backlog for the FCEP segment decreased by approximately $41.9 million due to lower order intake for forged and cast rolls offset by higher foreign exchange rates used to translate the backlog of the Corporation’s foreign subsidiaries into the U.S. dollar and improved order intake for FEP. Backlog for the ALP segment decreased by approximately $8.0 million year over year primarily due to the U.S. Navy’s decision to terminate production of the Constellation Frigate program, which resulted in $7.1 million of orders being removed from backlog toward the latter part of 2025. Costs related to the terminated orders are expected to be paid by the U.S. Navy along with normal profit margins. Approximately 6% of the backlog is expected to be released after 2026.

Competition

The Corporation faces considerable competition from a large number of companies in both segments. The Corporation believes, however, its subsidiaries are significant participants in each of the niche markets they serve. Competition in both segments is based on quality, service, price, and delivery. Significant barriers to entry exist in both segments that make it challenging for new competitors to enter into the markets we serve.

Environmental Protection Compliance Costs

Expenditures for environmental control matters were not material to either segment in 2025 and are not expected to be material in 2026.

Employees and Human Capital Management

Employees

On December 31, 2025, the Corporation and its subsidiaries had 1,432 active employees worldwide (substantially all full-time), of which approximately 62% were employed in the United States. Approximately 24% of the Corporation’s employees are covered by collective bargaining agreements.

Oversight

The Compensation Committee of the Corporation's Board of Directors maintains oversight of the Corporation’s human capital management strategies it may deem important to the long-term sustainability of the Corporation.

Key Areas of Focus for the Corporation

Health and Safety – The Corporation’s health and safety program is designed around the regulations associated with the specific hazards and unique working environments of the Corporation’s manufacturing operations and headquarters. The Corporation requires all of its locations to perform regular safety audits to ensure compliance with the safety program. Leading indicators, such as reporting and training of all near-miss events, are used to identify risks for potential future incidents. Lagging indicators, such as OSHA recordable rates and lost-time incidence rates, are used to measure achievement of safety metrics.

Workforce Composition – The Corporation's objective is to build a connected and inclusive culture that aligns with its priorities and long-term objectives. The Corporation is committed to creating an environment that supports top talent and fosters diverse perspectives.

Turnover and Absenteeism – The Corporation tracks various metrics such as turnover and absenteeism. The Corporation's goal is to maintain a positive work environment that provides meaningful reward to minimize turnover and absenteeism.

AVAILABLE INFORMATION

The Corporation files annual, quarterly and current reports; amendments to those reports; proxy statements; and other information with the Securities and Exchange Commission (“SEC”). You may access and read the Corporation’s filings without charge through the SEC’s website at www.sec.gov (http://www.sec.gov). The Corporation’s internet address is www.ampcopittsburgh.com (http://www.ampcopittsburgh.com). The Corporation makes available, free of charge on its website, access to these reports as soon as reasonably practicable after such material is filed with, or furnished to, the SEC. The information on the Corporation’s website is not part of this Annual Report on Form 10-K.

EXECUTIVE OFFICERS

The name, age, position with the Corporation, and business experience for at least the past five years of the Executive Officers of the Corporation are summarized below. Officers serve at the discretion of the Corporation's Board of Directors (“Board of Directors”) and none of the listed individuals serve as a director of another public company.

J. Brett McBrayer (age 60). Mr. McBrayer has served as Chief Executive Officer of the Corporation since July 2018. In addition, Mr. McBrayer serves as a director of UES-UK which, effective as of the Filing Date, was in administration with its affairs, business and property being managed by the Administrators. He previously served as President and Chief Executive Officer at Airtex Products and ASC Industries, a global manufacturer and distributor of automotive after-market and original equipment manufacturer fuel and water pumps, from 2012 to 2017. Airtex Products and ASC Industries, together with its parent company, UCI International LLC, and affiliated companies, filed for bankruptcy protection in June 2016, and successfully emerged in December 2016. Mr. McBrayer also served as Vice President and General Manager of the Alcan Cable business at Rio Tinto Alcan, as Vice President and General Manager of the Specialty Metals Division at Precision Cast Parts Corporation, and held positions of various responsibility and leadership during his 20 years with Alcoa, Inc. Mr. McBrayer received a Bachelor of Science in Industrial Engineering from the University of Tennessee and a Master of Arts in Applied Behavioral Science from Bastyr University.

David G. Anderson (age 58). The Board of Directors appointed Mr. Anderson to the office of Vice President, Chief Financial Officer, Treasurer and Assistant Secretary effective January 1, 2026. Mr. Anderson has been employed by the Corporation since 2010 and has served as President of Air & Liquid Systems Corporation since January 2022. He previously served as Vice President of Finance for Union Electric Steel Corporation from October 2018 to December 2021, and as Vice President of Air & Liquid Systems Corporation from May 2016 to October 2018.

Samuel C. Lyon (age 57). Mr. Lyon has served as President of Union Electric Steel Corporation since February 2019. In addition, Mr. Lyon serves as a director of UES-UK which, effective as of the Filing Date, was in administration with its affairs, business and property being managed by the Administrators. He previously served as Vice President and Group President of Performance Engineered Products at Carpenter Technology Corporation, a developer, manufacturer and distributor of stainless steels and corrosion-resistant alloys from July 2017 to January 2019.

Risk factors

As filed, 44,743 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Our business, financial condition, results of operations, liquidity, and the value of any investment in our securities are subject to a number of inherent risks and uncertainties. The risks and uncertainties described below are those we have identified as material as of the date of this Annual Report on Form 10-K, but they are not the only risks and uncertainties we face. Additional risks and uncertainties not currently known to us or we currently believe are not material also may impair our business, financial condition, results of operations, liquidity, and the value of any investment in our securities.

RISKS RELATED TO OUR BUSINESS AND INDUSTRY

We need to maintain adequate liquidity to meet our operating cash flow requirements, debt service costs, net asbestos payments, and other financial obligations.

Our liquidity is a function of our cash on-hand, our ability to successfully generate cash flows from a combination of efficient operations and continuing operating improvements, availability from our revolving credit facility, access to capital markets, and funding from other third parties. We believe our liquidity (including operating and other cash flows that we expect to generate and advances under our revolving credit availability) should be sufficient to meet our operating cash flow requirements, debt service costs, net asbestos payments, and other financial obligations as they occur. Our ability to maintain sufficient liquidity going forward, in part, is subject to the general liquidity of, and ongoing changes in, the credit markets as well as general economic, financial, competitive, legislative, regulatory, and other market factors that are beyond our control. If we are not able to maintain adequate liquidity, we may not be able to meet our operating cash flow requirements, debt service costs, net asbestos payments, or other financial obligations.

Cyclical demand for products and economic downturns could reduce the demand for, and sales of, our products, which could adversely affect our margins and profitability.

A significant portion of the FCEP segment’s sales consists of mill rolls to customers in the global steel and aluminum industries that may be periodically impacted by economic or cyclical downturns and other disruptions. Such downturns and disruptions, the timing and length of which are difficult to predict, may cause demand for steel and aluminum to be lower than forecasted which may reduce the demand for, and sales of, our forged and cast rolls both in the United States and the rest of the world. Lower demand for rolls may also adversely impact profitability as other competing roll producers lower selling prices in the marketplace to fill their manufacturing capacity. Cancellation of orders or deferral of roll delivery may occur and produce an adverse impact on our financial results. In addition, sales of FEP, specifically open-die forged products for the oil and gas industry and steel distribution markets, are impacted by fluctuations in global energy demand, which also could adversely affect our margins and profitability.

Excess global capacity in the steel industry could lower prices for our products, which could adversely affect our sales, margins and profitability, as well as the collectability of our receivables and the salability of our in-process inventory.

The global steel manufacturing capacity continues to exceed global consumption of steel products. Such excess capacity often results in manufacturers in certain countries exporting steel at prices significantly below their home market prices (often due to local government assistance or subsidies). Increased entry of low-priced products from other countries has negatively impacted, and may continue to negatively impact, local demand in the United States and Europe. This could lead to global market destabilization and reduced sales and profitability for some of our customers which, in turn, could affect our sales and profit margins as well as the collectability of our receivables and the salability of our in-process inventory. Excess capacity in the global roll industry and cyclicality in end-market demand also pose risks of potential impairment of our long-lived assets, which could be material to our results of operations and the carrying value of our assets.

We may not realize the expected benefits from any restructuring or realignment initiatives or improvement efforts that we have taken or may take in the future.

We periodically evaluate our segments and continue to undertake restructuring and realignment initiatives to reduce our overall cost basis and improve efficiency by pursuing a variety of strategies including, without limitation, optimizing our operations in our physical footprint, disposing of certain assets, and pursuing opportunities that are accretive to our operating results. There can be no assurance we will fully realize the benefits of such efforts as anticipated, and we may incur additional and/or unexpected costs to realize them. These actions could yield other unintended consequences, such as distraction of management and employees, business disruption, reduced employee morale and productivity, and unexpected employee attrition including the inability to attract or retain key personnel. If we fail to achieve the expected benefits of any restructuring or realignment initiatives and improvement efforts, or if other unforeseen events occur in conjunction with such efforts, our business, results of operations, financial condition and liquidity could be negatively impacted.

We may from time to time undertake internal corporate reorganizations that may adversely impact our business and results of operations.

From time to time, we have undertaken, and may undertake again, internal corporate reorganizations in an effort to simplify our organizational structure, streamline our operations or address other operational factors. Such internal reorganization involves and may involve, among other things, the combination or dissolution of certain of our existing subsidiaries, including legal insolvency proceedings, and the creation of new subsidiaries. These transactions could be disruptive to our business, result in significant expense, require regulatory approvals, or fail to result in the intended or expected benefits, any of which could adversely impact our business and results of operations.

We may not be able to scale our operational capacity in line with demand for our products.

Demand for our products, particularly in our ALP segment, may grow at a pace that exceeds our operational capacity, including our manufacturing capabilities. We may be required to expand our facilities, contract with third parties or acquire additional equipment to meet such growth, which we may not be able to do in a timely manner, if at all. If we are required to expand our facilities, contract with third parties or acquire additional equipment to meet growth in client demand, we may not have access to sufficient capital resources to expand in a timely manner, if at all. As a result, we may not be able to maximize sales growth and, therefore, could lose opportunities to produce additional revenue.

The ultimate liability of our subsidiaries for claims alleging personal injury from exposure to asbestos-containing components historically used in certain products of our subsidiaries could have a material adverse effect on our financial condition, results of operations or liquidity in the future.

Certain of our subsidiaries and, in some cases, we, are defendants in numerous claims alleging personal injury from exposure to asbestos-containing components historically used in certain products of these subsidiaries. Settlement agreements between the insurance carriers, our subsidiaries and, in some cases, us encompass the majority of insurance policies that provide coverage for claims. Through the current year end, our insurance has covered a majority of our settlement and defense costs. We believe the estimated costs, net of anticipated insurance recoveries, of our pending and future asbestos legal proceedings should not have a material adverse effect on our financial condition or liquidity. However, there can be no assurance our subsidiaries or we will not be subject to significant additional claims in the future or our subsidiaries’ ultimate liability with respect to asbestos claims will not present significantly greater and longer lasting financial exposure than provided in our consolidated financial statements. The ultimate net liability with respect to such pending and any unasserted claims is subject to various uncertainties including, but not limited to, the following:

  • the number and nature of claims in the future;
  • the costs of defending and settling these claims;
  • inability to reach acceptable agreements with insurance carriers currently not a party to a settlement agreement or at a coverage amount less than we have anticipated;
  • insolvencies among our insurance carriers and the risk of future insolvencies;
  • the possibility of adverse jury verdicts requiring damage payments in amounts greater than the amounts for which we have historically settled claims or have provided for future claims;
  • possible changes in the litigation environment or federal and state law governing the compensation of asbestos claimants; and
  • the risk of bankruptcies of other asbestos defendants which may increase our costs.

Because of the uncertainties related to such claims, it is possible our ultimate liability could have a material adverse effect on our financial condition, results of operations or liquidity in the future.

We could face limitations in availability of capital to fund our strategic plans. Additionally, deterioration in our credit profile or increases in interest rates could increase our costs of borrowing and further limit our access to capital markets and commercial credit.

We are parties to a senior secured asset-based revolving credit facility with a consortium of banks. The revolving credit facility is collateralized by a first priority perfected security interest in substantially all of our assets. The revolving credit facility provides for borrowings not to exceed $100 million and otherwise restricts us from incurring additional indebtedness outside of the agreement, unless approved by the lenders party to the revolving credit facility. The revolving credit facility is subject to various affirmative and negative covenants and contains various sub-limits, including those based on the type of collateral and borrowings by geographic region. If the financial covenants become difficult to meet or if we need to increase our borrowings beyond the prescribed limits, our financial position, results of operations and liquidity may be materially adversely affected. Further, our access to public and private capital markets is limited based on our size, credit profile and not being a well-known seasoned issuer, which may result in limitations in availability of capital to fund our strategic plans. If we are unable to fund our strategic plans, whether through cash from operations, availability from our revolving credit facility or proceeds from the capital markets, we may have to forego opportunities that would otherwise be accretive to our operating results for potentially an extended period.

A reduction in the level of our export sales, changes in foreign currency exchange rates as well as other economic factors in foreign countries could have an adverse impact on our financial results.

Exports are a significant portion of our sales. Historically, changes in foreign exchange rates, particularly in respect of the U.S. dollar, British pound, Swedish krona, and euro, have impacted the export of our products and may do so again in the future. Sales for certain of our subsidiaries are negotiated in a currency other than the subsidiary's functional (local) currency. Changes in a foreign exchange rate from the time of an order to the time of shipment have impacted the value of our recorded sales and may do so again in the future, and we may not be able to effectively hedge against such fluctuations. Other factors that may adversely impact our export sales and our operating results include political and economic instability, export controls, changes in tax laws and tariffs, and new producers in overseas markets. A reduction in the level of our export sales and changes in foreign currency exchange rates may have an adverse impact on our financial results. In addition, changes in foreign currency exchange rates may provide foreign roll suppliers with advantages based on those lower foreign currency exchange rates and, therefore, permit them to compete in our home markets.

Fluctuation in the value of the U.S. dollar relative to other currencies could adversely affect our business, results of operations and financial condition.

Certain of our subsidiaries operate in foreign jurisdictions and, accordingly, earn revenues, pay expenses, own assets, and incur liabilities in countries using currencies other than the U.S. dollar. Since our consolidated financial statements are presented in U.S. dollars, we must translate revenues and expenses into U.S. dollars at the average exchange rate during each reporting period and assets and liabilities into U.S. dollars at the exchange rate in effect at the end of each reporting period. Therefore, increases or decreases in the value of the U.S. dollar against other major currencies, or any failure by the Corporation to effectively hedge against unfavorable fluctuations, will affect the translated value for revenue, expenses and balance sheet items denominated in foreign currencies and could materially affect our financial results expressed in U.S. dollars.

The imposition of tariffs by the United States and other governments has negatively affected, and could again negatively affect, our operations, financial performance and liquidity.

The United States currently imposes tariffs on primary steel, aluminum and coated steel imports into the United States, has expanded tariffs to other imported products, and has removed exceptions allowing certain countries to send un-tariffed products to the United States. Other governments, including the European Union, have announced tariffs on steel imports or may do so in the future. As a result, tariffs are now incurred on forged and cast rolls shipped from the FCEP segment's European facilities into the United States and on U.S. forged and cast rolls shipped into China.

For a period of time in 2025, while tariffs were being negotiated and mechanisms to calculate the tariffs were under consideration, customer orders in the United States, Europe and China were slowed as pricing could not be understood. While end-market demand in the United States started to improve and order intake began to stabilize in the second half of 2025, demand in Europe continued to falter. During 2025, tariffs on steel product have, but may not continue to be, a tailwind for the segment's FEP products resulting in increased order volumes.

Additional tariffs or changes in tariffs could result in a slowing of customer orders again. During 2025, we were able to pass on the incremental tariff expense to the vast majority of our customers, which we may or may not be able to do in the future. Similarly, additional tariffs, changes in tariffs, or other changes in U.S. and foreign government trade policy may trigger retaliatory actions by affected countries, which could adversely impact demand for our products, as well as impact our costs, customers, suppliers, and/or the U.S. and global economy or certain sectors thereof and, thus, may adversely impact our business, operations and financial performance. Our financial condition, results of operations and liquidity may be affected by these tariffs, or similar actions.

Increases in energy and commodity prices, reductions in electricity and natural gas supply, or shortages of key production materials could adversely impact our production, which could result in lower profitability or higher losses.

Our subsidiaries use certain commodities in the manufacture of their products. These include steel scrap, ferroalloys and energy. The FCEP segment has fixed pricing for a portion of its estimated electricity and natural gas usage. The ALP segment has fixed pricing for a portion of its estimated aluminum usage. However, any unexpected, sudden or prolonged increase in the price of these commodities may cause a reduction in our profit margins or result in losses where beneficial fixed-priced contracts do not exist for sufficient supply, unfavorable fixed-priced contracts cannot be modified, or increases cannot be obtained in our selling prices.

In addition, there could be a time lag between when we incur such price increases and when we are able to recover such increases in our selling prices. Global increases in transportation costs and more limited availability of freight carriers may impact timely delivery of supplies to our subsidiaries and product to our customers, and may negatively impact our sales, production and profitability. Changes in our credit profile could cause less favorable commercial terms for the procurement of materials required to manufacture our products, which also could have a negative impact on our financial position, results of operations and liquidity. There also may be curtailment in electricity or natural gas supply or availability of key production materials, which could adversely impact our production or result in lower profitability, higher losses or impairment of our long-lived assets. Shortage of key production materials, while driving up costs, may be of such severity as to disrupt our production, all of which may impact our sales and profitability. Geopolitical factors or wars could exacerbate the above risks.

We are a party to sale-leaseback financing transactions, which creates the risk of loss if we default. If we fail to comply with the covenants as required by our various debt agreements, including our revolving credit facility, it may adversely affect our liquidity, results of operations and financial condition.

UES and Air & Liquid are parties to sale-leaseback financing transactions with Store Capital Acquisitions, LLC (“STORE”) for certain properties utilized by the segments of the Corporation. In connection with the sale-leaseback financing transactions, UES entered into a master lease with STORE whereby it will lease the same properties from STORE and further sublease certain properties to Air & Liquid and/or the Corporation. The master lease contains certain representations, warranties, covenants, obligations, conditions, indemnification provisions, and termination provisions customary for that type of agreement. If we default on the terms of the master lease and fail to renew such lease on acceptable terms, we could lose access to such properties and may not be able to continue with our manufacturing operations which could be detrimental to our financial position, results of operations and liquidity. In addition, if we close, sell or otherwise exit a property included in the sale-leaseback financing transactions, we would be required to sublet or provide replacement property, which may hinder our ability to successfully restructure our operations.

The maturity date for the revolving credit facility is June 25, 2030 and, subject to other terms and conditions of the agreement, would become due on that date. Failure to comply with material provisions or covenants in this facility and our other debt agreements could have a material adverse effect on our liquidity, results of operations and financial condition. We may seek to renegotiate or replace a facility or may determine not to replace a facility at all and, instead, pursue other forms of liquidity. Any new credit agreement or other forms of liquidity may result in higher borrowing costs and contain non-investment grade covenants that are less favorable in comparison to our existing revolving credit and other debt facilities, if available at all.

Our dependence on certain equipment may cause an interruption in our production if such equipment is out of operation for an extended period of time, which could result in lower sales and profitability.

Our principal business relies on certain unique equipment such as an electric arc furnace and a spin cast work roll machine. Although a comprehensive critical spare inventory of key components for this equipment is maintained, if any such unique equipment is out of operation for an extended period of time, it may result in a significant reduction in our sales and earnings. Additionally, repair costs may be significant which, if not sufficiently covered by insurance, may negatively impact our earnings and cash flows.

Pandemics and geopolitical conflicts may cause disruptions to our business and the industries in which we operate.

Pandemics and geopolitical conflicts may increase economic and demand uncertainty and could cause a sustained global recession. We may experience episodic disruptions to our operations or our business, or to the operations or the business of our customers and suppliers, which, individually or in the aggregate, may impact our financial condition, results of operations and liquidity. Further, local governmental measures may be implemented to control the spread of viruses, including restrictions on manufacturing and the movement of employees in many regions and countries, and may be significant.

A pandemic or geopolitical conflict may adversely affect our liquidity and our ability to access the capital markets. Additionally, government stimulus programs made available to us, our customers or our suppliers, if any, may prove to be insufficient or ineffective. Furthermore, in the event the impact from a pandemic or geopolitical conflict causes us to be unable to maintain a certain level of excess availability under our revolving credit facility, our availability of funds may become limited, or we may be required to renegotiate the facility on less favorable terms. If we are unable to access additional credit at the levels we require, or the cost of credit is greater than expected, it could materially adversely affect our financial condition, results of operations and liquidity.

We have significant international operations. A pandemic or geopolitical conflict could negatively affect our workforce, both domestically and abroad, requiring some or all of our employees to work remotely on a longer-term or permanent basis, thereby requiring new processes, procedures and controls to respond to changes in our business environment. We may be susceptible to increased litigation related to, among other things, the financial impacts of the pandemic or geopolitical conflict on our business, our ability to meet contractual obligations due to the pandemic or geopolitical conflict, employment practices or policies adopted during the health crisis, or litigation related to individuals contracting any disease as a result of alleged exposures on our premises.

The impact of a pandemic or a geopolitical conflict also may have the effect of exacerbating many of the other risks described herein.

A work stoppage or other industrial action on the part of any of our unions could be disruptive to our operations.

Our subsidiaries have several key operations which are subject to multi-year collective bargaining agreements with their hourly work forces. While we believe we have good relations with our unions, there is the risk of industrial action or work stoppage at the expiration of an agreement if contract negotiations fail, which may disrupt our manufacturing processes and impact our results of operations.

A change in the existing regulatory environment could negatively affect our operations, financial performance and liquidity.

We are subject to a wide variety of complex domestic and foreign laws, rules and regulations, including trade policies and tax regimes. We are affected by new laws and regulations and changes to existing laws and regulations, including interpretations by the courts and regulators, whether prompted by changes in government administrations or otherwise. These laws, regulations and policies, and changes thereto, may result in restrictions or limitations to our current operational practices and processes and our product offerings, which could negatively impact our current cost structure, revenue streams, future tax obligations, the value of our deferred income tax assets, cash flows, and overall financial position.

In addition, our tax filings are subject to audits by tax authorities in the various jurisdictions in which we do business. These audits may result in assessments of additional taxes that are subsequently resolved with the taxing authorities or through the courts. Currently, we believe there are no outstanding assessments the resolution of which would result in a material adverse financial result. However, there can be no assurance that unasserted or potential future assessments would not have a material adverse effect on our financial condition, results of operations and liquidity.

Certain of ALP's customers are suppliers to the U.S. government. Changes in U.S. government priorities, or delays or reductions in U.S. government spending, could have a material adverse effect on our customers' business and, therefore, on our business.

The ALP segment includes Buffalo Pumps, which is a division of Air & Liquid. Buffalo Pumps manufactures centrifugal pumps for the fossil-fueled power generation, marine defense and industrial refrigeration industries. As such, Buffalo Pumps enters into contracts with customers who supply the U.S. government, particularly the U.S. Navy, from time to time. A reduction or change in spending by the U.S. Navy and/or in overall U.S. defense spending, on an absolute or inflation-adjusted basis, because of shifting priorities, budget compromises, or otherwise, could materially and adversely affect the results of our customers' operations and, in turn, our operations. Further, failure to fund a federal budget or the termination of significant programs or contracts with these customers of Buffalo Pumps by the U.S. government could adversely affect our customers' business and financial performance and, accordingly, affect our business and financial performance. In the event that appropriations are delayed or a government shutdown occurs, and continues for an extended period of time, we may be at risk of reduced orders, program cancellations, nonpayment or payment delays, and other disruptions. Changes in funding priorities also could reduce opportunities in existing and future programs and/or initiatives where we intend to compete and where we have made investments. Even when the U.S. government operates under a continuing resolution, new contract and program starts may be restricted and funding for our customers' existing contracts and, therefore, our existing contracts may be unavailable, reduced, or delayed. The occurrence of any of the foregoing events could have a material adverse effect on our business, financial condition, and results of operations.

Failure of financial institutions or the need of liquidity from third-party sources by financial institutions may affect our access, or our customers’ access, to capital resources.

Failure of financial institutions or the need of liquidity from third-party sources by financial institutions may place additional stress on other financial institutions, which may limit our access, or our customers’ access, to short-term financing or result in higher interest rates. Our inability to access, or our customers’ inability to access, short-term financing at competitive rates may adversely affect our liquidity, financial condition or results of operations.

We periodically generate sales from individual customers approximating 10% of the net sales of the FCEP or ALP segments. The loss of, or significant reduction in, the orders of any such significant customer could have a material adverse effect on the segment's financial results.

For the year ended December 31, 2025, one customer accounted for approximately 10% of the net sales of the FCEP segment and one customer accounted for approximately 12% of the net sales of the ALP segment. For the year ended December 31, 2024, one customer accounted for approximately 11% of the net sales of the FCEP segment and no individual customer exceeded 10% of the net sales of the ALP segment. The loss of such customers, or a significant reduction in the orders of such customers, could have a material adverse effect on the segment.

Uncertainty related to environmental regulation and industry standards, as well as the physical risks of climate change, could impact our results of operations and financial position.

Increased public awareness and concern regarding environmental risks, including global climate change, may result in more international, regional and/or federal requirements or industry standards to reduce or mitigate global warming and other environmental risks. New climate change laws and regulations could require us to change our manufacturing processes or obtain substitute materials that may cost more or be less available for our manufacturing operations. Various jurisdictions in which we do business have implemented, or in the future could implement or amend, restrictions on emissions of carbon dioxide or other greenhouse gases, limitations or restrictions on water use, changes from traditional fossil fuel sources to renewables, regulations on energy management and waste management, and other climate change-based rules and regulations, which may increase our costs and adversely affect our operating results. In addition, the physical risks of climate change may impact the availability and cost of materials, sources and supply of energy, product demand and manufacturing and could increase our insurance and other operating costs. The expected future increased worldwide regulatory activity relating to climate change could expand the nature, scope and complexity of matters we are required to control, assess and report. If environmental laws or regulations or industry standards are either changed or adopted and impose significant operational restrictions and compliance requirements upon us, our suppliers, our customers, or our products, or if our operations are disrupted due to the physical impacts of climate change on us, our suppliers, our customers or our business, our results of operations, financial condition and liquidity could be adversely impacted.

RISKS RELATED TO OWNERSHIP OF OUR SECURITIES

We may not be able to satisfy the continued listing requirements of the New York Stock Exchange for our common stock.

Our common stock is currently listed on the New York Stock Exchange, which imposes objective and subjective requirements for continued listing. Continued listing criteria of the New York Stock Exchange include maintaining prescribed levels of financial condition, market capitalization and shareholders’ equity. Specifically, the New York Stock Exchange requires a company with common equity listed on its exchange to maintain average global market capitalization over a consecutive 30-day trading period of at least $50 million or maintain shareholders’ equity of at least $50 million and maintain a share price of at least $1.00. Our common stock’s average-global market capitalization over the 30-day trading period ended December 31, 2025 was $69.5 million, and our total Ampco-Pittsburgh shareholders’ equity was $32.6 million as of December 31, 2025.

Should we fall below the continued listing criteria of the New York Stock Exchange and receive a notice of non-compliance, the New York Stock Exchange may allow up to an 18-month cure period if we present a plan to become compliant with adequate strategic actions and progress reporting satisfactory to the New York Stock Exchange. If the New York Stock Exchange determines our common stock fails to satisfy the requirements for continued listing, or we continue to fail to meet listing criteria, and if the New York Stock Exchange does not provide us with an opportunity to become compliant or does not approve our actions to become compliant, or we do not make sufficient progress satisfactory to the New York Stock Exchange, our common stock could be de-listed from the New York Stock Exchange, which could impact potential liquidity for our shareholders.

If we fail to maintain an effective system of internal control, we may not be able to accurately determine our financial results or prevent fraud. As a result, our shareholders could lose confidence in our financial results, which could harm the business and the value of our securities.

Effective internal control is necessary to provide reliable financial reports and effectively prevent fraud. Section 404 of the Sarbanes-Oxley Act of 2002 requires us to evaluate and report on our internal control over financial reporting. Our internal control over financial reporting is not subject to attestation by our independent registered public accounting firm pursuant to the exemption provided to issuers that are not “large accelerated filers” or “accelerated filers” under the Dodd-Frank Act of 2010. There can be no assurance we will be successful in maintaining adequate internal control over our financial reporting and financial processes in the future. We may in the future discover areas of our internal control needing improvement. Furthermore, to the extent our business grows, our internal control may become more complex, and we would require significantly more resources to ensure our internal control remains effective. If we or our independent registered public accounting firm discover a material weakness, the disclosure of that fact, even if quickly remediated, could reduce the market value of our securities. Additionally, the existence of any material weakness could require us to devote significant time and incur significant expense to identify and remediate any such material weaknesses, and we may not be able to remediate any such material weaknesses in a timely manner.

Actions of activist shareholders with respect to us or our securities could be disruptive and potentially costly and the possibility that activist shareholders may contest, or seek changes conflicting with, our strategic direction could cause uncertainty about the strategic direction of our business.

Activist shareholders may, from time to time, attempt to effect changes in our strategic direction and, in furtherance thereof, may seek changes in how we are governed. While our Board of Directors and management team strive to maintain constructive, ongoing communications with all of our shareholders, including activist shareholders, and welcome their views and opinions with the goal of working together constructively to enhance value for all shareholders, activist campaigns that contest, or conflict with, our strategic direction could have an adverse effect on us because: (i) responding to actions by activist shareholders can disrupt our operations, be costly and time-consuming and divert the attention of our Board of Directors and senior management from the pursuit of business strategies, which could adversely affect our results of operations and financial condition; (ii) perceived uncertainties as to our future direction may lead to the perception of a change in the direction of the business, instability or lack of continuity which may be exploited by our competitors, cause concern to our current or potential customers, result in the loss of potential business opportunities, and make it more difficult to attract and retain qualified personnel and business partners; and (iii) these types of actions could cause significant fluctuations in our stock price due to factors not necessarily reflecting the underlying fundamentals and prospects of our business.

GENERAL RISK FACTORS

Changes in the global economic environment, inflation, elevated interest rates, recessions or prolonged periods of slow economic growth, global instability, and actual and threatened geopolitical conflict could have an adverse effect on our industry and business, as well as those of our customers and suppliers.

Overall economic conditions in the United States, Europe, and elsewhere, including adverse factors such as inflation, rising or sustained elevated interest rates, supply chain disruptions, and geopolitical conflicts significantly impact our business. Periods of economic downturn or continued uncertainty could result in us having difficulty increasing or maintaining our level of sales or profitability and we may experience an adverse effect on our business, results of operations, financial condition, and cash flows.

Our U.S. operations are subject to economic conditions, including credit and capital market conditions, inflation, prevailing interest rates, and political factors which, if changed, could negatively affect our results of operations, cash flows and liquidity. Political factors include, but are not limited to, increased or newly imposed tariffs in the markets in which we operate, increased regulation such as carbon emissions, limitations on trading including the export of energy and raw materials, trade remedies, and changes to tax laws and regulations resulting in increased income tax liability. Actions taken by the U.S. government could affect our results of operations, cash flows and liquidity.

We are subject to economic conditions and political factors associated with the European Union and neighboring countries, and the euro currency. Changes in any of these economic conditions or political factors could negatively affect our results of operations, cash flows and liquidity. Political factors include, but are not limited to, taxation, nationalization, inflation, government instability, regional conflict, civil unrest, increased regulation and quotas, tariffs, sanctions, and other market-distorting measures. Continued uncertainty and economic downturn in the European market have had a broad range of adverse impacts on global economic conditions, many of which have had, and are likely to continue to have, adverse impacts on our business and the business of our customers including increased raw material and energy costs, softer customer demand and lower steel prices, which has led, and may lead in the future, to the temporary idling of a portion of our customers’ raw steel capability until the demand environment improves. These uncertain conditions in the European market could lead to adverse effects on the valuation of our long-lived assets, which could negatively affect our results of operations through potential impairment charges.

Additionally, we are exposed to risks associated with the business success and creditworthiness of our suppliers and customers. If our customers or suppliers are negatively impacted by a slowdown in economic markets, we may face reductions, delays or cancellations of customer orders; delays or interruptions of the supply of raw materials; and increased risk of insolvency and other credit related issues of customers or suppliers, which could delay payments from customers, result in increased customer defaults and cause our suppliers to delay filling our orders on a timely or cost-effective basis, or at all. The occurrence of any of these events may adversely affect our business, results of operations, financial condition, and cash flows.

Potential attacks on information technology infrastructure and other cyber-based business disruptions could have a material adverse effect on our financial condition, results of operations and liquidity.

We depend on integrated IT systems to conduct our business. As a public, multi-national corporation, we are a target of phishing attacks on our email systems and other cyber-attacks, which may include computer denial-of-service attacks, computer viruses, ransomware and other malware, state-sponsored cyber-attacks, industrial espionage, insider threats, wire fraud, or other cyber incidents. IT systems failures, including risks associated with upgrading our systems or successfully integrating IT and other systems to common platforms, network disruptions and breaches of data security could disrupt our operations by impeding our processing of transactions, our ability to protect customer or company information and our financial reporting. Our computer systems, including our back-up systems, could be damaged or interrupted by power outages; computer and telecommunications failures; computer viruses; internal or external security breaches; events such as fires, earthquakes, floods, tornadoes, and hurricanes; and errors by our employees. Cyber-based risks are evolving and could include potential attacks to our IT infrastructure and to the IT infrastructure of third parties in attempts to gain unauthorized access to our confidential or other proprietary information or information relating to our employees, customers and other third parties, or to seek ransom. If a third party gains unauthorized access to our data, including any data regarding our employees, customers, or vendors, such security breach could expose us to risks, including loss of business, fines, and litigation. Although we have taken steps to address these concerns, there can be no assurance a system failure or data security breach will not have a material adverse effect on our financial condition, results of operations and liquidity.

Our By-laws designate the state and federal courts sitting in the judicial district of the Commonwealth of Pennsylvania as the sole and exclusive forum for certain types of actions and proceedings that may be initiated by our shareholders and the federal courts as the sole and exclusive forum for claims arising under the Securities Act of 1933, as amended, which could discourage lawsuits against us and our directors and officers but may be found to be inapplicable or unenforceable.

Our By-laws provide that, unless we otherwise consent in writing, the state and federal courts sitting in the judicial district of the Commonwealth of Pennsylvania embracing the county in which our principal executive office is located will be the sole and exclusive forum for (a) any derivative action or proceeding brought on behalf of us, (b) any action asserting a claim of breach of a fiduciary duty owed to us or our shareholders by any director, officer or other employee of ours, (c) any action asserting a claim against us or against any of our directors, officers or other employees arising pursuant to any provision of the Pennsylvania Business Corporation Law of 1988 or our Articles of Incorporation or By-laws, (d) any action seeking to interpret, apply, enforce, or determine the validity of our Articles of Incorporation or By-laws, or (e) any action asserting a claim against us or any director or officer or other employee of ours governed by the internal affairs doctrine (collectively, “Internal Governance Claims”). This exclusive forum provision does not apply to suits brought to enforce a duty or liability created by the Securities Exchange Act of 1934, as amended (the “Exchange Act”), or the Securities Act of 1933, as amended (the “Securities Act”). However, the federal courts are the sole and exclusive forum for any complaint asserting a cause of action arising under the Securities Act, pursuant to our By-laws, and any complaint asserting a cause of action arising under the Exchange Act, pursuant to Section 27 of the Exchange Act. This exclusive forum provision may limit the ability of our shareholders to bring a claim in a judicial forum that such shareholders find favorable for disputes with us or our directors or officers, which may discourage such lawsuits against us and our directors and officers. Alternatively, if a court outside of Pennsylvania with respect to Internal Governance Claims or any other state court with respect to a cause of action under the Securities Act were to find this exclusive forum provision inapplicable to, or unenforceable in respect of, one or more of the specified types of actions or proceedings described above, we may incur additional costs associated with resolving such matters in other jurisdictions, which could adversely affect our business, financial condition and results of operations.

Cybersecurity

As filed, 6,940 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Risk Management

The Corporation’s risk management program includes focused efforts to identify, assess and manage cybersecurity risks including, but not limited to, the following:

  • Developing and maintaining a standardized Written Information Security Policy (“WISP”), which provides specific provisions pertaining to employee training, network security, data security, and confidential information for use and adherence by all pertinent operating entities of the Corporation;
  • Developing and maintaining an Incident Response Plan (“IRP”), which provides specific directives in the event of a cyber-attack including identifying the attack, containing and eradicating the cyber-threat, avoiding and minimizing damages, reducing recovery time, and mitigating future cybersecurity risks;
  • Aligning the Corporation’s risk management program, as outlined in the WISP and the IRP, with the National Institute of Standards and Technology Cybersecurity Framework to prevent, detect and respond to cyber-attacks;
  • Requiring all employees with access to the Corporation’s networks to participate in regular and mandatory training on how to be aware of, and help defend against, cybersecurity risks, combined with periodic testing to measure the efficacy of the training efforts;
  • Testing vulnerability of the Corporation’s key systems to cybersecurity risks, including targeted penetration testing, tabletop incident response exercises, periodic audits by outside industry experts, and regular vulnerability scanning;
  • Maintaining adequate business continuity plans and critical recovery backup systems;
  • Engaging external cybersecurity experts in incident response development and management; and
  • Maintaining adequate cyber insurance for damages caused by a cyber-attack.

The Corporation’s information security program is managed by its Data Protection Manager (“DPM”) and supported by its Information Technology Department (collectively, the “IT Team”). The DPM has extensive experience in cyber and global data protection initiatives with the Corporation and reports directly to the Corporation’s Chief Executive Officer. The IT Team is responsible for leading enterprise-wide cybersecurity strategy, policy, standards, architecture, and processes.

In addition, the Corporation has established a Cybersecurity Materiality Assessment Team (“CMAT”) for the purpose of evaluating specific cyber incidents or a series of related incidents. It includes certain of the Corporation’s senior managers with cross-functional representation from operations, finance/accounting, information technology, risk management and human resources. CMAT is responsible for assessing the potential materiality of a cyber-incident based on the actual and anticipated potential impact to the Corporation’s results of operations, financial position and cash flows; operations including disruptions and downtime; strategic plans; confidential information; employee and community health and safety; customers and vendors; investors; regulatory compliance; and reputation.

Engage Third Parties

As part of the Corporation’s cybersecurity risk management process, the Corporation engages a range of third parties, including consultants, advisors and software providers, to assist with security assessments and operations, employee training and awareness, compliance, penetration testing, network and endpoint monitoring, threat intelligence, and the Corporation’s vulnerability management platform. These relationships enable the Corporation to access specialized knowledge and insights with respect to its cybersecurity strategies and processes. The Corporation's oversight of third-party service providers includes regular security reviews, and the IRP specifically includes protocols for responding to and mitigating risks arising from a breach at a third-party software or service provider.

Risks from Cybersecurity Threats

From time to time, the Corporation has experienced attempts by unauthorized parties to access or disrupt its information technology systems. To date, it has not experienced any known material breaches or material losses related to cyber-attacks. However, a failure of the Corporation’s information systems or a cybersecurity breach could materially and adversely affect its business, results of operations and financial condition. The Corporation manages its cybersecurity risk by limiting its threat landscape. For example, the Corporation does not store, transmit or process many of the types of data commonly targeted in cyber-attacks, such as consumer credit card or financial information. The Corporation recognizes cyber-threats are a permanent part of the risk landscape, and new threats are constantly evolving. For these and other reasons, cybersecurity is a top risk management priority.

Monitoring Cybersecurity Incidents

The Corporation’s efforts to prevent and detect cybersecurity incidents include continuous monitoring of the Corporation’s networks. Employees throughout the Corporation are trained to report cybersecurity threats as they are identified. If an incident occurs or is suspected, it is reported to the DPM who completes an initial assessment of the incident and assigns a priority level, as outlined in the IRP, to the incident. Simultaneously, the DPM initiates the review process with CMAT and proceeds with the remediation process for recovery and eradication.

The CMAT assesses potential materiality of the confirmed or suspected security incident based on the actual or anticipated potential impact to the Corporation’s results of operations, financial position and cash flows; operations including disruptions and downtime;

strategic plans; confidential information; employee and community health and safety; customers and vendors; investors; regulatory compliance; and reputation.

The DPM reviews any material cybersecurity threats or incidents, as defined in the IRP, with the Audit Committee of the Board of Directors (the “Audit Committee”) when they occur and non-material threats or incidents on a regular basis. Materiality of a cybersecurity threat or incident gives consideration to the potential and actual impact of the cybersecurity threat or incident.

Board of Directors’ Oversight

The Audit Committee oversees and reviews the design and effectiveness of the Corporation’s cybersecurity program and its contingency plans and provides regular reports to the Board of Directors. The DPM provides periodic reports to the Audit Committee, the Corporation’s Chief Executive Officer, Chief Financial Officer, and other members of senior management at each of the Audit Committee meetings and in the event of a cyber incident deemed material. These reports include updates on the Corporation’s cyber risks and threats, the status of projects to strengthen its information security systems, assessments of the information security program, and the emerging threat landscape.

Properties

As filed, 3,648 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

The location and general character of the principal locations in each segment are included in the below summary. Domestic locations are leased and foreign locations are owned, unless otherwise noted. In addition, the Corporation has sales offices located in several foreign countries. See Note 5, Property, Plant and Equipment, and Note 10, Debt, to the Consolidated Financial Statements for disclosure of properties held as collateral.

Company and Location Principal Use Approximate Square Footage Type of Construction
FORGED AND CAST ENGINEERED PRODUCTS SEGMENT
Union Electric Steel Corporation
Route 18 Burgettstown, PA 15021* Manufacturing facilities 296,800 on 55 acres Metal and steel
726 Bell Avenue Carnegie, PA 15106* Manufacturing facilities and offices 165,900 on 8.7 acres Metal and steel
U.S. Highway 30 Valparaiso, IN 46383* Manufacturing facilities 88,000 on 20 acres Metal and steel
1712 Greengarden Road Erie, PA 16501* Manufacturing facilities 40,000 on 1 acre Metal and steel
Åkers Sweden AB
Bruksallén 12SE-647 51 Åkers Styckebruk, Sweden Manufacturing facilities and offices 394,000 on 162 acres Steel framed, metal and brick
Åkers Valji Ravne d.o.o.
Koroška c. 14 SI-2390 Ravne na Koroškem, Slovenia Manufacturing facilities and offices 106,000 on 2.1 acres Brick
Shanxi Åkers TISCO Roll Co., Ltd.
No. 2 Jian Cao Ping Taiyuan, Shanxi, China Manufacturing facilities and offices 338,000 on 14.6 acres Metal, steel and brick

AIR AND LIQUID PROCESSING SEGMENT

Air & Liquid Systems Corporation
Aerofin Division 4621 Murray Place Lynchburg, VA 24506* Manufacturing facilities and offices 146,000 on 15.3 acres Brick, concrete and steel
Buffalo Air Handling Division
467 Zane Snead Drive Amherst, VA 24531* Manufacturing facilities and offices 89,000 on 19.5 acres Metal and steel
4201 Murray Place Lynchburg, VA 24501* Manufacturing facilities and offices 69,700 on 8.6 acres Metal and cement block
Buffalo Pumps Division
874 Oliver Street N. Tonawanda, NY 14120* Manufacturing facilities and offices 94,000 on 9 acres Metal, brick and cement block

* Facility is leased.

Most of the Corporation’s domestic real property locations are subject to sale-leaseback financing transactions with STORE, including its manufacturing facilities. See Note 10, Debt, to the Consolidated Financial Statements.

UES subleases office space to the Corporation. The Corporation further subleases a portion of its office space to Air & Liquid for use as its headquarters.

The Corporation believes all of the owned facilities are adequate and suitable for their respective purposes.

The forged roll facilities of the FCEP segment operated within approximately 80% to 85% of their normal capacity during 2025. Excluding the operations of UES-UK, the cast roll facilities of the FCEP segment operated within approximately 85% to 95% of normal operating capacity during 2025. The facilities of the ALP segment operated within approximately 70% to 80% of their normal capacity. Normal capacity is defined as capacity under approximately normal conditions with allowances made for unavoidable interruptions such as lost time for repairs, maintenance, breakdowns, set-up, failure, supply delays, labor shortages and absences, Sundays, holidays, vacation, and inventory taking. The number of work shifts is also taken into consideration.

As filed, 1,978 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

LITIGATION

The Corporation and its subsidiaries may become involved in various claims and lawsuits incidental to their businesses. In addition, claims have been asserted alleging personal injury from exposure to asbestos-containing components historically used in some products manufactured by predecessors of Air & Liquid. Air & Liquid and, in some cases, the Corporation, are defendants (among a number of defendants, often in excess of 50) in cases filed in various state and federal courts. The Corporation believes appropriate reserves have been established. See Note 20, Litigation, to the Consolidated Financial Statements.

INSOLVENCY

As of the Filing Date (October 14, 2025), the Directors of UES-UK filed a Notice of Appointment with the Insolvency Court formally appointing FRP as administrators of UES-UK (the “Administrators”). This action was confined to UES-UK exclusively and did not affect the Corporation or any of its other subsidiaries. As of the Filing Date, UES-UK was in administration and its affairs, business and property were being managed by the Administrators. The Administrators have set out their proposals to UES-UK’s creditors, which include an orderly wind-down of UES-UK’s financial affairs and sale of its assets. See Note 2, Exit and Deconsolidation Charges, to the Consolidated Financial Statements.

ENVIRONMENTAL

The Corporation is currently performing certain remedial actions in connection with the sale of real estate previously owned and periodically incurs costs to maintain compliance with environmental laws and regulations. Environmental exposures are difficult to assess and estimate for numerous reasons, including lack of reliable data, the multiplicity of possible solutions, the years of remedial and monitoring activity required, and identification of new sites. The Corporation believes appropriate reserves have been established. See Note 22, Environmental Matters, to the Consolidated Financial Statements.

Management's discussion and analysis

As filed, 62,212 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

(in thousands, except per share amounts)

THE BUSINESS

Ampco-Pittsburgh Corporation and its subsidiaries (collectively, the “Corporation”) manufacture and sell highly engineered, high-performance specialty metal products and customized equipment utilized by industry throughout the world. It operates in two business segments: the *Forged and Cast Engineered Products (“*FCEP”) segment and the *Air and Liquid Processing (“*ALP”) segment. This segment presentation is consistent with how the Corporation’s chief operating decision maker evaluates financial performance and makes resource allocation and strategic decisions about the business.

The FCEP segment produces forged hardened steel rolls, cast rolls and forged engineered products (“FEP”). Forged hardened steel rolls are used primarily in hot and cold rolling mills by producers of steel, aluminum and other metals. Cast rolls, which are produced in a variety of iron and steel qualities, are used mainly in hot strip mills, medium/heavy section mills, roughing mills, and plate mills. FEP principally are sold to customers in the steel distribution market, the oil and gas industry, and the aluminum and plastic extrusion industries. The segment has operations in the United States, Sweden, Slovenia, and an equity interest in two joint venture companies in China. Collectively, the segment primarily competes with European, Asian, and North and South American companies in both domestic and foreign markets and operates several sales offices located throughout the world.

The ALP segment includes Aerofin, Buffalo Air Handling and Buffalo Pumps, all divisions of Air & Liquid Systems Corporation (“Air & Liquid”), a wholly owned subsidiary of the Corporation. Aerofin produces custom-engineered finned tube heat exchange coils and related heat transfer products for a variety of industries including original equipment manufacturers and commercial, nuclear power generation and industrial manufacturing. Buffalo Air Handling produces large custom-designed air handling systems for institutional (e.g., hospital, university), pharmaceutical and general industrial building markets. Buffalo Pumps manufactures centrifugal pumps for the fossil-fueled power generation, marine defense and industrial refrigeration industries. The segment has operations in Virginia and New York with its headquarters in Carnegie, Pennsylvania. The segment utilizes an independent group of sales offices located throughout the United States and Canada.

EXIT AND DECONSOLIDATION CHARGES

In February 2025, Union Electric Steel UK Limited (“UES-UK”), an indirect wholly owned subsidiary of the Corporation, entered into a formal consultation process with its unions and staff to evaluate various options to improve its profitability. The U.K. operations had been impacted by unpredictable and high energy costs compared to its foreign competitors, lower demand for its products manufactured in the U.K., and increased imports of rolls and flat rolled steel into Europe from low-cost countries. UES-UK completed its formal consultation process in the second quarter of 2025 and, in light of UES-UK's historical performance and management's outlook for the remainder of 2025 and subsequent years, decided to exit its operations.

The Corporation initially recognized charges approximating $10,790 primarily for employee-related costs payable to the employees of UES-UK under existing benefit plans and accelerated depreciation from reducing the estimated remaining useful lives and revising the estimated residual values of the property, plant and equipment of UES-UK. These charges include similar closure costs approximating $800 for the non-core steel distribution facility located in Ohio held by Alloys Unlimited and Processing, LLC (“AUP”) (collectively, the “Exit Charges”).

The Exit Charges included the following components:

Type of Cost Location of Cost in Statement of Operations For the Year Ended December 31, 2025
Employee-related costs Severance charge $6,266
Accelerated depreciation Depreciation and amortization 3,327
Professional fees Selling and administrative 611
Loss on sale of assets Loss on disposal of assets 210
Other Costs of products sold (excluding depreciation and amortization) 376
Total Exit Charges $10,790

The charge for employee-related costs primarily represents statutory severance and other benefits payable to the approximately 168 employees of UES-UK and the 15 employees of AUP under existing benefit plans. Accelerated depreciation is a non-cash charge and represents primarily higher depreciation expense resulting from reducing the estimated remaining useful lives and revising the estimated residual values of the property, plant and equipment of UES-UK and AUP. Professional fees represent direct costs incurred relating to the formal consultation process for and Structured Insolvency of UES-UK and closure of AUP. Loss on sale of assets is a non-cash charge and represents the loss on the sale of the equipment of AUP.

On October 13, 2025, the Directors of UES-UK voluntarily filed a Notice of Intention to appoint certain insolvency practitioners of FRP Advisory Trading Limited (“FRP”) as administrators of UES-UK (collectively, the “Administrators”) pursuant to the requirements of the Insolvency Act 1986 of England and Wales in the High Court of Justice, Business and Property Courts at Leeds (the “Insolvency Court”). On October 14, 2025, (the “Filing Date”), the Directors of UES-UK filed a Notice of Appointment with the Insolvency Court formally appointing the Administrators as administrators of UES-UK. This action was confined to UES-UK exclusively and did not affect the Corporation or any of its other subsidiaries.

As of the Filing Date, through the date of this Annual Report on Form 10-K, UES-UK was in administration and its affairs, business and property were being managed by the Administrators (the “Structured Insolvency”). The Administrators have set out their proposals to UES-UK’s creditors which include an orderly wind-down of UES-UK’s financial affairs and sale of its assets. Any funds remaining after the costs and expenses associated with the Structured Insolvency will be distributed in the order of priority set forth in the Insolvency Act 1986.

Through October 13, 2025, the date immediately prior to the Filing Date, the operating results of UES-UK are included in the consolidated operating results of the Corporation. Effective as of the Filing Date, the Corporation no longer consolidates the operating results of UES-UK, as the Corporation no longer has decision-making control over UES-UK. In addition, as of the Filing Date, the Corporation recognized a non-cash charge of $41,424 to (i) write-down the carrying value of its investment in UES-UK to its estimated fair value; (ii) recognize the amount of other comprehensive losses of UES-UK deferred in accumulated other comprehensive loss and (iii) establish an estimated recovery for the amount of funds expected to be returned to the lenders under the Corporation's Second Amended and Restated Revolving Credit, Term Loan and Security Agreement (the “Credit Agreement”), if any, after the costs and expenses of the Structured Insolvency (the “Deconsolidation Charge”). The majority of the severance charges included in the Exit Charges will no longer be required to be paid as a result of the Structured Insolvency. In addition, the Corporation expects its future cash expenditures associated with the Structured Insolvency to be insignificant. See Note 2, Exit and Deconsolidation Charges, to the Consolidated Financial Statements.

EXECUTIVE OVERVIEW

For the FCEP segment, global steel manufacturing capacity continues to exceed global consumption of steel products. Demand for steel is soft but stable. In 2025, as a result of low-priced products from other countries entering the United States, tariffs, as outlined under Section 232 of the Trade Expansion Act of 1962, were increased for products with domestic melt and pour requirements imported into the United States. In addition, in the third quarter of 2025, the U.S. government announced new tariffs on coated steel imported into the United States. According to U.S. Census Bureau and U.S. Commerce Department data, imports for 2025 have decreased when compared to 2024 with import reductions accelerating as the year progressed. This should result in increased utilization of our customers' domestic facilities. Similarly, we believe modified tariff and quota systems have been strengthened in Canada and Mexico to support their steel industries, which also should result in better utilization for our customers located in these countries.

Tariffs are also now incurred on forged and cast rolls shipped from the segment's European facilities into the United States and on U.S. forged and cast rolls shipped into China. Since the cast roll market is currently underserved in the United States, the Corporation believes the segment's remaining European cast operations are approximately on equal footing with its competition with respect to tariffs. Tariffs on steel product also have been a tailwind for the segment's FEP products resulting in increased order volumes. Negotiations with our customers have been successful, resulting in the vast majority of these costs being passed on to our customers.

The local currency of each of the subsidiaries of the FCEP segment is its functional (local) currency. Each of these subsidiaries may enter into contractual arrangements with customers or vendors which may be denominated in a currency other than its functional (local) currency. Currently, the Corporation does not hedge any of its foreign-denominates sales or purchases. Accordingly, changes in foreign currency exchange rates, between the date the underlying contract is executed and the date the revenue or costs are recognized and from year to year, will affect the value of reported sales and operating results. During the year, the FCEP segment was adversely affected by movement in the global foreign currency exchange market resulting in lower functional (local) currency sales and operating results when compared to the prior year, particularly for its operations in Sweden.

The primary focus for the FCEP segment for 2026 is to improve its profitability by maintaining a strong position in the roll market and continuing to improve operational efficiency and equipment reliability following the completion of a significant capital equipment program during the second quarter of 2024.

For the ALP segment, the businesses are benefiting from increased demand in the power generation and U.S. military markets and have successfully increased market share but continue to face increasing production costs due to inflation. The segment has been implementing price increases for its products to help mitigate these inflationary effects. Following previous U.S. government actions, tariffs are incurred on certain of the segment's raw materials, primarily those that contain copper or copper alloys. Costs associated with these tariffs have been, and are expected to continue to be, passed on to customers. Tariff outcomes are fluid and subject to change; however, the United States's onshoring of additional manufacturing capabilities would potentially increase demand for the segment's products. The primary focus for the ALP segment for 2026 is to grow revenues, monitor and minimize inflationary and tariff effects, strengthen engineering and manufacturing capabilities to keep pace with growth opportunities, and continue to improve its sales distribution network.

The Corporation is actively monitoring, and will continue to actively monitor, changes prompted by the U.S. government, repercussions from the Middle East conflicts and similar geopolitical matters, economic conditions, and other developments relevant to its business, including the potential impact on its operations, financial condition, liquidity, suppliers, industry, and workforce.

CONSOLIDATED RESULTS OF OPERATIONS OVERVIEW

The Corporation

Net Sales: 2025 2024
Forged and Cast Engineered Products $292,608 67% $286,565 69%
Air and Liquid Processing 141,558 33% 131,740 31%
Consolidated $434,166 100% $418,305 100%
(Loss) Income from Operations:
Forged and Cast Engineered Products(1) $(44,679) $10,494
Air and Liquid Processing (2) 2,145 15,858
Corporate costs (11,945) (14,183)
Consolidated $(54,479) $12,169
Backlog:
Forged and Cast Engineered Products $208,604 63% $250,530 66%
Air and Liquid Processing 120,333 37% 128,354 34%
Consolidated $328,937 100% $378,884 100%

(1) (Loss) income from operations for the FCEP segment includes the Deconsolidation Charge of $41,424 and the Exit Charges of $10,790, as more fully explained in Note 2, Exit and Deconsolidation Charges, to the Consolidated Financial Statements.

(2) (Loss) income from operations for the ALP segment includes a net charge (benefit) for asbestos-related items of $12,352 and $(4,184) in 2025 and 2024, respectively, as more fully explained in Note 20, Litigation, to the Consolidated Financial Statements.

Net sales equaled $434,166 and $418,305 for 2025 and 2024, respectively, an increase of $15,861. While net sales for both of the segments improved, the majority of the increase is attributable to the ALP segment. A discussion of sales by segment is included below.

(Loss) income from operations equaled $(54,479) and $12,169 for 2025 and 2024, respectively. Loss from operations for 2025 includes the Deconsolidation Charge of $41,424 to (i) write-down the Corporation investment in UES-UK to its estimated fair value; (ii) recognize the other comprehensive losses of UES-UK deferred in accumulated other comprehensive loss; and (iii) establish an estimated recovery for the amount of funds expected to be returned to the lenders under the Credit Agreement, if any, after the costs and expenses of the Structured Insolvency. The estimated recovery was based on the Corporation's assessment of the expected recovery from the Structured Insolvency proceedings including consideration of information provided by the Administrators. The Corporation has evaluated, and will continue to evaluate, the continued appropriateness of the estimated recovery. If it is determined the estimated recovery is lower than currently estimated, then a charge to net (loss) income would be recorded. Similarly, if it is determined the estimated recovery is higher than currently estimated, then a credit to net (loss) income would be recorded. Any recovery will be distributed in the order of priority set forth in the Insolvency Act 1986.

In addition, loss from operations for 2025 includes:

  • Charge of $12,352 associated with the increase in the estimated costs of pending and future asbestos claims net of additional insurance recoveries offset by a reduction in the estimated defense-to-indemnity cost ratio from 55% to 50% (the “Asbestos-Related Charge”);
  • The Exit Charges for severance and related costs associated with exiting the Corporation's U.K. and AUP operations of approximately $10,790; and
  • Employee-retention credits, which are refundable employer payroll taxes for certain eligible businesses affected by the COVID-19 pandemic, of $735 received from the Internal Revenue Service during the second quarter of 2025 (the “Employee-Retention Credits”) for the FCEP ($456) and ALP ($279) segments.

By comparison, included in income from operations for 2024 is a:

  • Credit of $4,101 associated with the decrease in the estimated costs of pending and future asbestos claims net of additional insurance recoveries and a reduction in the estimated defense-to-indemnity cost ratio from 60% to 55% (the “Asbestos-Related Credit”) and
  • Credit of $83 for proceeds received from an insolvent asbestos-related insurance carrier (the “Asbestos-Related Proceeds”).

A discussion of (loss) income from operations for the Corporation’s two segments is included below. Corporate costs decreased in 2025, when compared to 2024, by $2,238, primarily due to lower employee incentive-related costs.

Backlog equaled $328,937 at December 31, 2025 versus $378,884 as of December 31, 2024. Backlog represents the accumulation of firm orders on hand which: (i) are supported by evidence of a contractual arrangement, (ii) include a fixed and determinable sales price, (iii) have collectability that is reasonably assured, and (iv) generally are expected to ship within two years from the backlog reporting date. Backlog at a certain date may not be a direct measure of future revenue for a particular order because price increases, negotiated subsequently to the original order, are not included in backlog until the updated contract is received from the customer, certain surcharges are not determinable until the order is completed and ready for shipment to the customer, and certain orders are denominated in currency other than the functional (local) currency of the subsidiary and are not hedged. Approximately 6% of the backlog is expected to be released after 2026. A discussion of backlog by segment is included below.

Gross margin, excluding depreciation and amortization, as a percentage of net sales was 18.4% and 19.5% for 2025 and 2024, respectively. For the FCEP segment, gross margin, excluding depreciation and amortization, decreased when compared to the prior year, primarily as a result of lower absorption and changes in product mix. For the ALP segment, gross margin, excluding depreciation and amortization, improved when compared to the prior year, primarily as a result of higher production volumes and a favorable product mix.

Selling and administrative expenses approximated $52,125 (12.0% of net sales) and $54,878 (13.1% of net sales) for 2025 and 2024, respectively. The decrease of $2,753 is principally due to lower employee incentive-related costs offset by higher professional fees.

Depreciation and amortization expense equaled $21,785 and $18,611 for 2025 and 2024, respectively. The increase of $3,174 is primarily attributable to the $3,327 of accelerated depreciation resulting from reducing the estimated remaining useful lives and revising the estimated residual values of the property, plant and equipment of UES-UK and AUP.

Charge (credit) for asbestos-related costs equaled $12,352 and $(4,184) for 2025 and 2024, respectively.

The charge for 2025 represents:

  • An increase in the estimated settlement costs of pending and future asbestos claims, net of additional insurance recoveries, of $14,525 primarily as a result of recent experience; offset by
  • A reduction in the estimated defense-to-indemnity cost ratio from 55% to 50%, based on ongoing experience and improvements in defense costs that are expected to continue, which reduced estimated costs by approximately $2,173.

The credit for 2024 represents the net of:

  • A decrease in the estimated settlement costs of pending and future asbestos claims, net of additional insurance recoveries, of $366 primarily as a result of recent experience;
  • A reduction in the estimated defense-to-indemnity cost ratio from 60% to 55%, based on ongoing experience and improvements in defense costs that are expected to continue, which reduced estimated costs by approximately $3,735; and
  • Asbestos-Related Proceeds of $83.

See Note 20, Litigation, to the Consolidated Financial Statements.

Deconsolidation Charge represents the non-cash charge to (i) write-down the carrying value of the Corporation's investment in UES-UK to its estimated fair value; (ii) recognize the amount of other comprehensive losses of UES-UK deferred in accumulated other comprehensive loss and (iii) establish an estimated recovery for the amount of funds expected to be returned to the lenders under the Credit Agreement, if any, after the costs and expenses of the Structured Insolvency.

Severance charge represents primarily statutory severance and other benefits payable to the approximately 168 employees of UES-UK and the 15 employees of AUP under existing benefit plans.

Interest expense equaled $11,369 and $11,620 for 2025 and 2024, respectively. The net decrease of $251 is principally due to:

For the Year Ended December 31, 2025
Lower average interest rates - primarily revolving credit facility $(614)
Lower average borrowings outstanding (372)
Interest on Equipment Term Notes 490
Effect from capitalizing interest in the prior year 251
Other (6)
$(251)

Other income – net for 2025 decreased when compared to 2024 principally due to the lower net pension and other postretirement income resulting from a lower expected return on plan assets in 2025 versus 2024.

2025 2024 Change
Net pension and other postretirement income $2,929 $4,798 $(1,869)
Losses on foreign exchange transactions (851) (483) (368)
Investment and interest income 262 121 141
Unrealized gains on Rabbi trust investments 86 68 18
Other - (7) 7
$2,426 $4,497 $(2,071)

Income tax provision equaled $120 and $2,695 for 2025 and 2024, respectively, and includes income taxes associated with the Corporation’s profitable operations. An income tax benefit is not able to be recognized on losses of certain of the Corporation’s entities since it is “more likely than not” the asset will not be realized. Accordingly, changes in the income tax provision for each period includes the effects of changes in the pre-tax income of the Corporation’s profitable operations in each jurisdiction and changes in expectations as to whether an income tax benefit will be able to be realized for the deferred income tax assets recognized.

The income tax provision for 2025 benefited from a lower statutory income tax rate on the earnings of the Corporation's majority-owned Chinese joint venture as a result of the joint venture qualifying as a high-tech enterprise (“HTE”). As an HTE, the earnings of the Chinese joint venture are taxed at a rate of 15% (versus 25%). The effect on the income tax provision was a benefit of $1,000 for the year ended December 31, 2025, when compared to the income tax provision for the year ended December 31, 2024.

The income tax provision for 2025 includes a state income tax benefit of approximately $494 associated with the Asbestos-Related Charge whereas the income tax provision for 2024 includes state income tax expense of approximately $153 associated with the Asbestos-Related Credit.

Valuation allowances are recorded against the majority of the Corporation’s deferred income tax assets. The Corporation will maintain the valuation allowances until there is sufficient evidence to support the reversal of all or some portion of the valuation allowances. Given the Corporation’s anticipated future earnings from operations in Sweden, due in part to the movement of cast roll production from the U.K. to Sweden, and in the United States, the Corporation believes there is a reasonable possibility within the next 12 months, sufficient positive evidence may become available to allow the Corporation to conclude some portion of the valuation allowance will no longer be needed. Release of any portion of the valuation allowance would result in the recognition of deferred income tax assets on the Corporation’s consolidated balance sheet and a decrease to the Corporation’s income tax expense in the period the release is recorded. The exact timing and the amount of the valuation allowance released are subject to, among many items, the level of profitability achieved. Once the valuation allowance is completely reversed, a tax provision would be recognized on earnings.

On July 4, 2025, the One Big Beautiful Bill Act (“OBBBA”) was enacted in the United States. OBBBA introduces multiple tax law and legislative changes, including modifications to income tax provisions such as business interest expense limitations, domestic research and development expenses and U.S. taxation of international earnings. It also reinstates 100% bonus depreciation for property acquired and placed into service on or after January 19, 2025. The Corporation has recognized the effects of the OBBBA provisions in its financial results to the extent they are applicable for the year ended December 31, 2025. Certain provisions of the OBBBA have effective dates after December 31, 2025. The Corporation will continue to evaluate the impact of these provisions on its future consolidated financial statements.

Net (loss) attributable to Ampco-Pittsburgh was approximately $(66,067) or $(3.28) per common share for 2025. Net loss attributable to Ampco-Pittsburgh and net loss per common share attributable to Ampco-Pittsburgh for 2025 include a net after-tax charge of $63,348 or $3.15 per common share associated with the Deconsolidation Charge, the Exit Charges, the Asbestos-Related Charge, and the Employee-Retention Credits. No income tax benefit was able to be recognized for the Deconsolidation Charge or the Exit Charges since the underlying operations remained in a three-year cumulative loss position as of December 31, 2025. The income tax benefit resulting from the Corporation's majority-owned Chinese joint venture qualifying as an HTE of approximately $1,000 reduced the net loss attributable to Ampco-Pittsburgh and net loss per common share attributable to Ampco-Pittsburgh by approximately $598, or $0.03 per common share, for 2025.

Net income attributable to Ampco-Pittsburgh was approximately $438 or $0.02 per common share for 2024. Net income attributable to Ampco-Pittsburgh and net income per common share attributable to Ampco-Pittsburgh for 2024 include a net after-tax credit of $4,031 or $0.20 per common share associated with the Asbestos-Related Credit and the Asbestos-Related Proceeds.

Forged and Cast Engineered Products

Net sales: 2025 2024 Change
Forged and cast mill rolls $274,257 $273,036 $1,221
FEP 18,351 13,529 4,822
$292,608 $286,565 $6,043
Operating (loss) income $(44,679) $10,494 $(55,173)
Backlog:
Forged and cast mill rolls $197,897 $248,437 $(50,540)
FEP 10,707 2,093 8,614
$208,604 $250,530 $(41,926)

Net sales increased by $6,043 in 2025 from 2024 principally due to:

  • Improved pricing, including variable-index surcharges passed through to customers as a result of fluctuations in the price of raw material, energy and transportation cost, which increased net sales in 2025 when compared to 2024 by approximately $9,400;
  • Higher volume of FEP shipments, which increased net sales in 2025 when compared to 2024 by approximately $3,100; and
  • Changes in exchange rates used to translate net sales of the segment’s foreign subsidiaries into the U.S. dollar, which increased net sales in 2025 when compared to 2024 by approximately $4,400; offset by
  • Lower volume of roll shipments, which decreased net sales in 2025 when compared to 2024 by approximately $10,900.

The operating loss for 2025 includes the Deconsolidation Charge of $41,424 and the Exit Charges of $10,790. In addition, operating results for 2025 when compared to 2024 included:

  • Improved pricing, including variable-index surcharges, and fluctuations in manufacturing costs, which improved operating results by approximately $9,100; and
  • Lower selling and administrative expenses, principally due to lower employee-related costs, which improved operating results in 2025 when compared to 2024 by approximately $1,000; and
  • Employee-Retention Credits of $456 for 2025; offset by
  • Negative absorption and lower margin, which adversely impacted operating results in 2025 when compared to 2024 by approximately $7,400; and
  • Net lower volume of shipments, which decreased operating results in 2025 when compared to 2024 by approximately $5,800.

Backlog equaled $208,604 at December 31, 2025 and $250,530 at December 31, 2024, a decrease of $41,926 principally due to:

  • Lower backlog for rolls principally due to softer demand, which decreased backlog at December 31, 2025 when compared to backlog at December 31, 2024 by approximately $65,300; offset by
  • Higher foreign exchange rates used to translate the backlog of the Corporation’s foreign subsidies into the U.S. dollar, which increased backlog at December 31, 2025 when compared to backlog at December 31, 2024 by approximately $14,700; and
  • Higher backlog for FEP resulting primarily from market recovery, which increased backlog at December 31, 2025 when compared to backlog at December 31, 2024 by approximately $8,600.

At December 31, 2025, approximately 6% of the backlog is expected to ship after 2026.

Air and Liquid Processing

Net sales: 2025 2024 Change
Air handling systems $50,028 $46,439 $3,589
Heat exchange coils 48,451 45,237 3,214
Centrifugal pumps 43,079 40,064 3,015
$141,558 $131,740 $9,818
Operating income(1) $2,145 $15,858 $(13,713)
Backlog $120,333 $128,354 $(8,021)

(1) For 2025, includes a net charge of $12,352 for the Asbestos-Related Charge. For 2024, includes a net benefit of $(4,184) for the Asbestos-Related Credit and the Asbestos-Related Proceeds. See Note 20, Litigation, to the Consolidated Financial Statements for further information.

The increase in net sales for 2025, when compared to the prior year, is primarily due to:

  • Higher net sales of air handling systems primarily due to improved demand, resolution of prior year supply chain disruption, and additional capacity provided by a second assembly facility which became fully functional during 2024.
  • Higher net sales of heat exchange coils primarily due to:
  • Higher volume of shipments to customers in the nuclear industry of approximately $4,800; and
  • Higher volume of shipments to customers in the commercial industry of approximately $1,100; offset by
  • Lower volume of shipments to original equipment manufacturers and fossil-utility customers of approximately $2,700.
  • Higher net sales of centrifugal pumps primarily due to:
  • Higher volume of shipments of replacement pumps and parts of approximately $11,500 offset by
  • Lower volume of shipments of new pump sets of approximately $8,500.

Operating results decreased by $13,713 in 2025 when compared to 2024 primarily due to higher asbestos-related costs of $16,536. Operating results for 2025 include the Asbestos-Related Charge of $12,352 whereas operating results for 2024 include the Asbestos-Related Credit of $4,101 and the Asbestos-Related Proceeds of $83. See Note 20, Litigation, to the Consolidated Financial Statements for further discussion.

In addition, the change in operating results from the prior year includes:

  • Higher volume of sales and favorable changes in product mix, which improved operating results in 2025 when compared to 2024 by approximately $2,900; and
  • Employee-Retention Credits of $279 for 2025; offset by
  • Higher selling and administrative costs, including higher commissions associated with the increase in the volume of sales of air handling units, which reduced operating results in 2025 when compared to 2024 by approximately $300; and
  • Higher depreciation costs of approximately $100 associated with the capital investment at the second assembly facility.

Backlog at December 31, 2025 decreased $8,021 from December 31, 2024 primarily due to the U.S. Navy’s decision to terminate production of the Constellation Frigate program, which resulted in $7,100 of orders being removed from backlog toward the latter part of 2025. Costs related to the terminated orders are expected to be paid by the U.S. Navy along with normal profit margins. Backlog for air handlers and heat exchange coils decreased slightly at December 31, 2025 when compared to December 31, 2024. At December 31, 2025, approximately 6% of the backlog is expected to ship after 2026.

Non-GAAP Financial Measures

The Corporation presents non-GAAP adjusted EBITDA and non-GAAP adjusted income (loss) from operations. Non-GAAP adjusted EBITDA is calculated as net (loss) income excluding interest expense, other income - net, income tax provision, depreciation and amortization, and stock-based compensation along with significant charges or credits that are one-time charges or credits, unrelated to the Corporation’s ongoing results of operations, or beyond its control. Non-GAAP adjusted income (loss) from operations is calculated as (loss) income from operations excluding depreciation and amortization and stock-based compensation along with significant charges or credits that are one-time charges or credits, unrelated to a segment’s or the Corporation's ongoing results of operations, or beyond its control. These non-GAAP financial measures were adjusted to exclude the Asbestos-Related Charge (Credit), the Asbestos-Related Proceeds, the Deconsolidation Charge, the Exit Charges, and the Employee-Retention Credits. This non-GAAP financial measure is not based on any standardized methodology prescribed by accounting principles generally accepted in the United States of America (“GAAP”) and may not be comparable to similarly titled measures presented by other companies.

Beginning in 2025, the Corporation began presenting non-GAAP adjusted EBITDA along with non-GAAP adjusted income (loss) from operations. These measures are key measures used by the Corporation's management and Board of Directors to understand and evaluate the operating performance of the Corporation and its segments. While these non-GAAP measures may not be directly comparable to similarly titled measures presented by other companies, the Corporation's management and Board of Directors believe these non-GAAP measures enhance comparability to companies in its stated industry peer group. Additionally, a portion of the incentive and compensation arrangements for certain employees is based on the Corporation’s business performance. The Corporation believes these non-GAAP financial measures help identify underlying trends in its business that otherwise could be masked by the effect of these items it excludes from adjusted EBITDA and adjusted income (loss) from operations. The Corporation also believes these non-GAAP financial measures provide useful information to management, shareholders and investors, and others in understanding and evaluating its operating results, enhancing the overall understanding of its past performance and future prospects and allowing for greater transparency with respect to key financial metrics used by the Corporation’s management in its financial and operational decision-making. In particular, the Corporation believes the exclusion of the Asbestos-Related Charge (Credit), the Asbestos-Related Proceeds, the Deconsolidation Charge, the Exit Charges, and the Employee-Retention Credits can provide a useful measure for period-to-period comparisons of the Corporation’s core business performance.

Non-GAAP adjusted EBITDA and non-GAAP adjusted income (loss) from operations are not prepared in accordance with GAAP and should not be considered in isolation of, or as an alternative to, measures prepared in accordance with GAAP. There are limitations related to the use of non-GAAP adjusted EBITDA, rather than net (loss) income, or non-GAAP adjusted income (loss) from operations, rather than (loss) income from operations, which are the nearest GAAP equivalents. Among other things, there can be no assurance that additional expenses similar to the Asbestos-Related Charge, the Deconsolidation Charge and the Exit Charges or additional benefits similar to the Asbestos-Related Credit, the Asbestos-Related Proceeds and the Employee-Retention Credits will not occur in future periods.

The adjustments reflected in non-GAAP adjusted income (loss) from operations are pre-tax. The net tax (benefit) expense associated with the adjustments is approximately $(483) for 2025 and $153 for 2024. No income tax benefit was able to be recognized for the Deconsolidation Charge or the Exit Charges since the underlying operations remained in a three-year cumulative loss position as of December 31, 2025.

The following is a reconciliation of net (loss) income to non-GAAP adjusted EBITDA for 2025 and 2024, respectively:

2025 2024
Net (loss) income (GAAP) $(63,542) $2,351
Add (deduct):
Interest expense 11,369 11,620
Other income - net (2,426) (4,497)
Income tax provision 120 2,695
(Loss) income from operations (GAAP) (54,479) 12,169
Add (deduct):
Depreciation and amortization(1) 21,785 18,611
Stock-based compensation 1,351 1,478
Asbestos-Related Charge (Credit) 12,352 (4,101)
Asbestos-Related Proceeds — (83)
Deconsolidation Charge 41,424 —
Exit Charges, excluding accelerated depreciation(2) 7,463 —
Employee-Retention Credits (735) —
Adjusted EBITDA (Non-GAAP) $29,161 $28,074

(1) Depreciation and amortization for 2025 includes accelerated depreciation of $3,327.

(2) The accelerated depreciation portion of the Exit Charges of $3,327 is included in depreciation and amortization.

The following is a reconciliation of (loss) income from operations to non-GAAP adjusted income (loss) from operations for 2025 and 2024, respectively:

2025 FCEP ALP Corp(3) Consolidated 2024 FCEP ALP Corp(3) Consolidated
(Loss) income from operations (GAAP) $(44,679) $2,145 $(11,945) $(54,479) $10,494 $15,858 $(14,183) $12,169
Add (deduct):
Depreciation and amortization(1) 20,600 1,185 — 21,785 17,602 1,009 — 18,611
Stock-based compensation — — 1,351 1,351 — — 1,478 1,478
Asbestos-Related Charge (Credit) — 12,352 — 12,352 — (4,101) — (4,101)
Asbestos-Related Proceeds — — — — — (83) — (83)
Deconsolidation Charge 41,424 — — 41,424 — — — —
Exit Charges, excluding accelerated depreciation(2) 7,463 — — 7,463 — — — —
Employee-Retention Credits (456) (279) — (735) — — — —
Income (loss) from operations, as adjusted (Non-GAAP) $24,352 $15,403 $(10,594) $29,161 $28,096 $12,683 $(12,705) $28,074

(1) Depreciation and amortization for 2025 includes accelerated depreciation of $3,327.

(2) The accelerated depreciation portion of the Exit Charges of $3,327 is included in depreciation and amortization.

(3) Corporate represents the operating expense of the corporate office and other costs not allocated to the various segments.

LIQUIDITY AND CAPITAL RESOURCES

2025 2024 Change
Net cash flows provided by operating activities $1,344 $18,028 $(16,684)
Net cash flows used in investing activities (9,224) (8,245) (979)
Net cash flows provided by (used in) financing activities 2,213 (1,353) 3,566
Effect of exchange rate changes on cash and cash equivalents 943 (289) 1,232
Net (decrease) increase in cash and cash equivalents (4,724) 8,141 (12,865)
Cash and cash equivalents at beginning of period 15,427 7,286 8,141
Cash and cash equivalents at end of period $10,703 $15,427 $(4,724)

Net cash flows provided by operating activities equaled $1,344 and $18,028 for 2025 and 2024, respectively, with the decrease primarily due to a change in customer-related liabilities (principally customer deposits) of approximately $14,160. In addition, net cash flows provided by operating activities for the prior year benefited from the reimbursement of asbestos-related costs of approximately $1,756 from a previously unsettled insurance carrier. See Note 20, Litigation, to the Consolidated Financial Statements.

Trade receivables at December 31, 2025 increased by approximately $8,900 when compared to trade receivables at December 31, 2024 primarily due to:

  • Higher sales in November and December of 2025 versus November and December of 2024, which increased trade receivables at December 31, 2025 when compared to December 31, 2024 by approximately $10,800;
  • Higher exchange rates used to translate the trade receivables of the Corporation's foreign subsidiaries into the U.S. dollar, which increased trade receivables at December 31, 2025 when compared to December 31, 2024 by approximately $2,500; and
  • Deconsolidation of UES-UK, which reduced accounts receivable at December 31, 2025 by approximately $4,200 when compared to December 31, 2024.

Inventories at December 31, 2025 decreased by approximately $(12,300) when compared to inventories at December 31, 2024 primarily due to:

  • Deconsolidation of UES-UK, which reduced inventories at December 31, 2025 by approximately $10,300 when compared to December 31, 2024; and
  • Lower levels of raw materials and in-process inventory, particularly for the ALP segment, which reduced inventories at December 31, 2025 when compared to December 31, 2024 by approximately $6,400; offset by
  • Higher exchange rates used to translate the inventories of the Corporation's foreign subsidiaries into the U.S. dollar, which increased inventories at December 31, 2025 when compared to December 31, 2024 by approximately $4,300.

Accounts payable at December 31, 2025 increased by approximately $11,400 when compared to accounts payable at December 31, 2024 primarily due to:

  • Timing of payments;
  • Higher exchange rates used to translate the accounts payable of the Corporation’s foreign subsidiaries into the U.S. dollar, which increased accounts payables at December 31, 2025 when compared to December 31, 2024 by approximately $2,000; and
  • Higher payables for property, plant and equipment of approximately $1,186 at December 31, 2025 versus December 31, 2024; offset by
  • Deconsolidation of UES-UK, which reduced accounts payable at December 31, 2025 by approximately $3,100 when compared to December 31, 2024.

Although the Corporation recorded the Asbestos-Related Charge (Credit) in 2025 and 2024, these were non-cash charges (credits) and, accordingly, did not impact net cash flows provided by operating activities. Instead, net asbestos-related payments equaled $8,654 in 2025 and, prior to reimbursement of asbestos-related costs from a previously unsettled insurance carrier, equaled $8,292 in 2024. Net asbestos-related payments are expected to approximate $9,000 in 2026 and are expected to continue in the foreseeable future. The amount of asbestos-related payments and corresponding insurance recoveries are difficult to predict and can vary based on a number of factors, including changes in assumptions, as outlined in Note 20, Litigation, to the Consolidated Financial Statements.

Contributions to the defined benefit pension and other postretirement benefit plans equaled $4,595 and $6,978 in 2025 and 2024, respectively. Contributions to the defined benefit pension and other postretirement benefit plans are expected to approximate $3,800 in 2026, $2,700 in 2027, $2,700 in 2028, $2,000 in 2029, and $1,700 in 2030.

Net cash flows used in investing activities equaled $(9,224) and $(8,245) for 2025 and 2024, respectively, an increase of $979 which is primarily due to:

  • Deconsolidation of UES-UK cash on hand at the time of its Structured Insolvency of $3,189; and
  • Lower government incentives, such as grants, of approximately $750 received by a division of the ALP segment for specific capital purchases; offset by
  • Lower capital expenditures for the FCEP segment of approximately $1,100;
  • Lower capital expenditures for the ALP segment of approximately $1,700; and
  • Higher proceeds from the sale of property, plant and equipment of approximately $200, which is attributable primarily to the sale of AUP equipment.

To date, no repayment obligations exist for any government incentives received. At December 31, 2025, commitments for future capital expenditures approximated $7,500, which is expected to be spent over the next 12-24 months.

Net cash flows provided by (used in) financing activities equaled $2,213 and $(1,353) for 2025 and 2024, respectively, a change of $3,566 primarily due to:

  • Proceeds of $13,500 from the new Equipment Term Notes resulting from amending the Corporation's revolving credit facility in June 2025; offset by
  • Higher repayment of debt principal of $4,252;
  • Higher net repayments on the Corporation’s revolving credit facility of $3,781;
  • No proceeds from the equipment financing facility in the current year, due to the completion of a significant capital equipment program during 2024, whereas the prior year included proceeds from the equipment financing facility of $1,692; and
  • Debt issuance costs of $891 incurred in connection with amending the Corporation's revolving credit facility.

In addition, Åkers TISCO Roll Co., Ltd. (“ATR”), a 59.88% indirectly owned joint venture of Union Electric Steel Corporation, repaid $664 due to its minority shareholder during the year ended December 31, 2024.

The current portion of debt increased approximately $3,500 as of December 31, 2025 from December 31, 2024 due to:

  • Outstanding swing loans as of December 31, 2025 of $1,219 whereas no swing loans were outstanding as of December 31, 2024. Swing loans are temporary advances under the revolving credit facility and short-term in nature. Accordingly, swing loans are classified as a current liability until the amount is either repaid, as customers remit payments, or, if elected by the Corporation, refinanced as a longer-term loan under the revolving credit facility.
  • Principal payments due under the Equipment Term Notes during the next 12 months, which were entered into in June 2025.

The maturity date for the revolving credit facility is June 25, 2030 and, subject to the other terms and conditions of the revolving credit agreement, will become due on that date. In addition, the Corporation has Industrial Revenue Bonds (“IRBs”) which begin to become due late 2027. Although considered remote by the Corporation, the bonds can be put back to the Corporation on short notice if they are not able to be remarketed. Future principal payments, assuming the revolving credit facility and other debt instruments become due on their respective maturity dates and the IRBs are called in 2026, are $15,723 for 2026, $5,707 for 2027, $5,775 for 2028, $6,003 for 2029, and $57,677 for 2030. Along with principal payments, the Corporation will be required to make regular interest payments, the amount of which will vary as the underlying benchmark rates change. See Note 10, Debt, to the Consolidated Financial Statements.

The effect of exchange rate changes on cash and cash equivalents is primarily attributable to the fluctuation of the British pound and Swedish krona against the U.S. dollar.

As a result of the above, cash and cash equivalents decreased by $4,724 during 2025 and ended the period at $10,703 in comparison to $15,427 at December 31, 2024. The majority of the Corporation’s cash and cash equivalents is held by its foreign operations. Domestic customer remittances are used to pay down borrowings under the Corporation’s revolving credit facility daily, resulting in minimal cash maintained by the Corporation’s domestic operations. Cash held by the Corporation’s foreign operations is considered to be permanently re-invested; accordingly, a provision for estimated local and withholding tax has not been made. If the Corporation was to remit any foreign earnings to it or any of its U.S. entities, the estimated tax impact is expected to be insignificant.

Funds on hand, funds generated from future operations and availability under the Corporation’s revolving credit facility are expected to be sufficient to finance the Corporation’s operational requirements, debt service costs, net asbestos payments, and capital expenditures. As of December 31, 2025, remaining availability under the revolving credit facility approximated $25,454, net of standard availability reserves. Since a significant portion of the Corporation’s debt includes variable rate interest, increases in the underlying benchmark rates will increase the Corporation’s debt service costs.

While the Corporation anticipates it has sufficient liquidity to finance the Corporation’s operational requirements, debt service costs, net asbestos payments, and capital expenditures, it may from time to time consider alternatives, potential transactions and other strategies in an attempt to enhance its liquidity. Given such measures are forward looking, the Corporation cannot ensure it would be successful in achieving such enhancements or be able to improve its liquidity.

With respect to litigation, see Note 20, Litigation, to the Consolidated Financial Statements. With respect to environmental matters, see Note 22, Environmental Matters, to the Consolidated Financial Statements.

OFF-BALANCE SHEET ARRANGEMENTS

The Corporation’s off-balance sheet arrangements include the previously mentioned expected future capital expenditures and letters of credit unrelated to the IRBs. See Note 13, Commitments and Contingent Liabilities, to the Consolidated Financial Statements. These arrangements are not considered significant to the liquidity, capital resources, market risk, or credit risk of the Corporation.

EFFECTS OF INFLATION

Inflationary and market pressures on costs are likely to continue. Customer orders for the FCEP and ALP segments generally are expected to ship within two years from the backlog date, thereby mitigating the risk of inflation when compared to longer-term contracts. In addition, product pricing is reflective of current costs. For the FCEP segment, approximately 70% of customer orders include a commodity, energy and transportation surcharge. The ability to pass on future increases in the price of commodities for the balance of the customer orders will be negotiated on a contract-by-contract basis. To minimize the effect of future increases, including for customer orders without a surcharge, the FCEP segment has fixed pricing for a portion of its estimated electricity and natural gas usage. The ALP segment also has fixed pricing for a portion of its estimated commodity (aluminum) usage.

LABOR AGREEMENTS

The Corporation has long-term labor agreements at each of the key locations. Certain of these agreements will expire in 2026. As is consistent with past practice, the Corporation will negotiate with the intent to secure mutually beneficial arrangements covering multiple years.

COMMITMENTS AND CONTIGENT LIABILITIES

See Note 13, Commitments and Contingent Liabilities, to the Consolidated Financial Statements.

DERIVATIVE INSTRUMENTS

See Note 16, Derivative Instruments, to the Consolidated Financial Statements.

APPLICATION OF CRITICAL ACCOUNTING ESTIMATES

The Corporation has identified critical accounting estimates important to the presentation of its financial condition, changes in financial condition and results of operations and involve the most complex or subjective assessments. Critical accounting estimates relate to assessing recoverability of property, plant and equipment and accounting for pension and other postretirement benefits, litigation and loss contingencies, and income taxes.

Property, plant and equipment is reviewed for recoverability whenever events or circumstances indicate the carrying amount of the long-lived assets may not be recoverable. If the undiscounted cash flows generated from the use and eventual disposition of the assets are less than their carrying value, then the asset value may not be fully recoverable, resulting in a write-down of the asset value. Estimates of future cash flows are based on expected market conditions over the remaining useful life of the primary asset(s). Accordingly, assumptions are made about pricing, volume and asset-resale values. Actual results may differ from these assumptions. We believe the amounts recorded in the accompanying consolidated financial statements for property, plant and equipment are recoverable and are not impaired as of December 31, 2025.

Accounting for pension and other postretirement benefits involves estimating the cost of benefits to be provided well into the future and attributing that cost over the time period each employee works. To accomplish this, input from the Corporation’s actuaries is evaluated and extensive use is made of assumptions about inflation, long-term rate of return on plan assets, longevity, employee turnover, and discount rates. The curtailment of the majority of the Corporation’s defined benefit pension plans and the amendment of various other postretirement benefit plans have helped to mitigate the volatility in net periodic pension and other postretirement benefit costs resulting from changes in these assumptions.

The expected long-term rate of return on plan assets is an estimate of the average rates of earnings expected to be earned on funds invested, or to be invested, to provide for the benefits included in the projected benefit obligation. Since these benefits will be paid over many years, the expected long-term rate of return is reflective of current investment returns and investment returns over a longer period. Consideration is also given to target and actual asset allocations, inflation and real risk-free return. The Corporation believes the expected long-term rate of return of 6.40% for its domestic plan to be reasonable, which compares to its actual return on plan assets of approximately 10.35% for 2025. A percentage point decrease in the expected long-term rate of return would increase annual pension expense by approximately $1,800. Conversely, a percentage point increase in the expected long-term rate of return would decrease annual pension expense by approximately $1,800.

The discount rates used in determining future pension obligations and other postretirement benefits for each of the plans are based on rates of return for high-quality fixed-income investments currently available and expected to be available during the period to maturity of the pension and other postretirement benefits. High-quality fixed-income investments are defined as those investments which have received one of the two highest ratings given by a recognized rating agency with maturities of 10+ years. A 25-basis point increase in the discount rate would decrease projected and accumulated benefit obligations by approximately $3,800. Conversely, a 25-basis point decrease in the discount rate would increase projected and accumulated benefit obligations by approximately $3,800.

The Corporation believes that the amounts recorded in the accompanying consolidated financial statements related to pension and other postretirement benefits are based on assumptions that are appropriate at December 31, 2025, although actual outcomes could differ.

Litigation and loss contingency accruals are made when it is determined it is probable a liability has been incurred and the amount can be reasonably estimated. Specifically, the Corporation and certain of its subsidiaries are involved in various claims and lawsuits incidental to their businesses. In addition, claims have been asserted alleging personal injury from exposure to asbestos-containing components historically used in some products manufactured by predecessors of Air & Liquid (the “Asbestos Liability”). To assist the Corporation in determining whether an estimate could be made of the potential liability for pending and unasserted future claims for the Asbestos Liability along with applicable insurance coverage, and the amounts of any estimates, the Corporation hires a nationally recognized asbestos-liability expert and an insurance consultant. Based on their analyses, reserves for probable and reasonably estimable costs for the Asbestos Liability, including defense costs, and receivables for the insurance recoveries deemed probable, are established. These amounts rely on assumptions which are based on currently known facts and strategy.

The Corporation’s policy is to evaluate the Asbestos Liability and related insurance receivables as well as the underlying assumptions on a regular basis. Key variables in these assumptions, including the ability to reasonably estimate the Asbestos Liability through the expected final date by which the Corporation expects to have settled all asbestos-related claims, are summarized in Note 20, Litigation, to the Consolidated Financial Statements. Key assumptions include the number and nature of new claims to be filed each year, the average cost of disposing of each new claim, average annual defense costs, ability to reach acceptable agreements with insurance carriers currently not a party to a settlement agreement or at a coverage amount less than anticipated, and the solvency risk with respect to the relevant insurance carriers. Other factors that may affect the Asbestos Liability and the Corporation’s ability to recover under its insurance policies include uncertainties surrounding the litigation process from jurisdiction to jurisdiction and from case to case, reforms that may be made by state and federal courts and the passage of state or federal tort reform legislation. Actual expenses or insurance recoveries could be significantly higher or lower than those recorded if assumptions used in the calculations vary significantly from actual results.

The Corporation intends to continue to evaluate the Asbestos Liability and related insurance receivables as well as the underlying assumptions on a regular basis to determine whether further adjustments to the estimates are required. Due to the uncertainties surrounding asbestos litigation and insurance, these regular reviews may result in the incurrence of future charges or credits; however, the Corporation is currently unable to estimate such future changes. Adjustments, if any, to the Corporation’s estimate of the Asbestos Liability and/or insurance receivables could be material to its operating results for the periods in which the adjustments to the liability or receivable are recorded, and to its liquidity and financial position when such liabilities are paid.

Accounting for income taxes includes the Corporation’s evaluation of the underlying accounts, permanent and temporary differences, its tax filing positions, and interpretations of existing tax law. A valuation allowance is recorded against deferred income tax assets to reduce them to the amount that is “more likely than not” to be realized. In doing so, assumptions are made about the future profitability of the Corporation and the nature of that profitability. Actual results may differ from these assumptions. If the Corporation determined it would not be able to realize all or part of the deferred income tax assets in the future, an adjustment to the valuation allowance would be established resulting in a charge to net (loss) income. Likewise, if the Corporation determined it would be able to realize deferred income tax assets in excess of the net amount recorded, a portion of the existing valuation allowance would be released resulting in a credit to net income (loss). As of December 31, 2025, the valuation allowance approximates $51,110, reducing deferred income tax assets to $3,898, an amount the Corporation believes is “more likely than not” to be realized.

The Corporation does not recognize a tax benefit in the consolidated financial statements related to a tax position taken or expected to be taken in a tax return unless it is “more likely than not” the tax authorities will sustain the tax position solely on the basis of the position’s technical merits. Consideration is primarily given to legislation and statutes, legislative intent, regulations, rulings, and case law as well as their applicability to the facts and circumstances of the tax position when assessing the sustainability of the tax position. In the event a tax position no longer meets the “more likely than not” criteria, the Corporation would reverse the tax benefit by recognizing a liability and recording a charge to earnings. Conversely, if the Corporation subsequently determined a tax position met the “more likely than not” criteria, it would recognize the tax benefit by reducing the liability and recording a credit to earnings. As of December 31, 2025, based on information known to date, the Corporation believes the amount of unrecognized tax benefits for tax positions taken or expected to be taken in a tax return, which may be challenged by the tax authorities, not to be significant.

The Corporation’s tax filings are subject to audits by tax authorities in the various jurisdictions in which it does business. These audits may result in assessments of additional taxes. At December 31, 2025, based on information known to date, the Corporation believes there are no pending or outstanding assessments whose resolution would require recognition in its consolidated financial statements.

See Note 21, Income Taxes, to the Consolidated Financial Statements.

RECENTLY IMPLEMENTED AND ISSUED ACCOUNTING PRONOUNCEMENTS

See Note 1, Summary of Significant Accounting Policies, to the Consolidated Financial Statements.

Controls and procedures

As filed, 3,665 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Disclosure Controls and Procedures. An evaluation of the effectiveness of the Corporation’s disclosure controls and procedures as of the end of the period covered by this report was carried out under the supervision, and with the participation, of management, including the principal executive officer and principal financial officer. Disclosure controls and procedures are defined under SEC rules as controls and other procedures that are designed to ensure that information required to be disclosed by a company in the reports that it files under the Exchange Act is recorded, processed, summarized and reported within required time periods. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by an issuer in the reports that it files or submits under the Exchange Act is accumulated and communicated to the issuer’s management, including its principal executive officer and principal financial officer, or persons performing similar functions, as appropriate, to allow timely decisions regarding required disclosure. Based on that evaluation, the Corporation’s management, including the principal executive officer and principal financial officer, has concluded the Corporation’s disclosure controls and procedures were effective at a reasonable assurance level as of December 31, 2025.

Management’s Annual Report on Internal Control Over Financial Reporting. The Corporation’s management is responsible for establishing and maintaining adequate internal control over financial reporting (as defined in Rule 13a – 15(f) under the Securities Exchange Act). Internal control over financial reporting cannot provide absolute assurance of achieving financial reporting objectives because of its inherent limitations. Effective internal control over financial reporting can only provide reasonable assurance that the objectives of the control process are met. Internal control over financial reporting is a process that involves human diligence and compliance and is subject to lapses in judgment and breakdowns resulting from human failures. Internal control over financial reporting also can be circumvented by collusion or improper management override. Because of such limitations, there is a risk that material misstatements may not be prevented or detected on a timely basis by internal control over financial reporting. However, these inherent limitations are known features of the financial reporting process. Therefore, it is possible to design into the process safeguards to reduce, though not eliminate, this risk. Further, the design of internal control over financial reporting includes the consideration of the benefits of each control relative to the cost of the control.

Management assessed the effectiveness of internal control over financial reporting as of December 31, 2025. In making this assessment, management used the criteria set forth in Internal Control – Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission. Based on those criteria and management’s assessment, management, including the principal executive officer and principal financial officer, concluded the Corporation’s internal control over financial reporting was effective as of December 31, 2025.

Changes in Internal Control Over Financial Reporting. There were no changes in the Corporation’s internal control over financial reporting during the quarter ended December 31, 2025, that have materially affected, or are reasonably likely to materially affect, its internal control over financial reporting.

Figures reported in this filing

Standardized line items from the XBRL in this filing, for the period ended 2025-12-31. Comparative periods it repeats are left out.

Figures reported in this filing
Line itemPeriodValueXBRL concept
Revenue12 months2025-01-01 to 2025-12-31$416.3mus-gaap:RevenueFromContractWithCustomerExcludingAssessedTax
Research and development12 months2025-01-01 to 2025-12-31$494.0kus-gaap:ResearchAndDevelopmentExpense
Selling, general and administrative12 months2025-01-01 to 2025-12-31$52.1mus-gaap:SellingGeneralAndAdministrativeExpense
Operating income12 months2025-01-01 to 2025-12-31−$54.5mus-gaap:OperatingIncomeLoss
Income tax12 months2025-01-01 to 2025-12-31$120.0kus-gaap:IncomeTaxExpenseBenefit
Net income12 months2025-01-01 to 2025-12-31−$66.1mus-gaap:NetIncomeLoss
Diluted EPS12 months2025-01-01 to 2025-12-31−$3.28us-gaap:EarningsPerShareDiluted
Basic EPS12 months2025-01-01 to 2025-12-31−$3.28us-gaap:EarningsPerShareBasic
Diluted shares (weighted)12 months2025-01-01 to 2025-12-3120,139,000 sharesus-gaap:WeightedAverageNumberOfDilutedSharesOutstanding
Operating cash flow12 months2025-01-01 to 2025-12-31$1.3mus-gaap:NetCashProvidedByUsedInOperatingActivities
Capital expenditure12 months2025-01-01 to 2025-12-31$9.4mus-gaap:PaymentsToAcquirePropertyPlantAndEquipment
Cash and equivalentsAt period end2025-12-31$10.7mus-gaap:CashAndCashEquivalentsAtCarryingValue
Current assetsAt period end2025-12-31$239.6mus-gaap:AssetsCurrent
Total assetsAt period end2025-12-31$495.4mus-gaap:Assets
Current liabilitiesAt period end2025-12-31$130.5mus-gaap:LiabilitiesCurrent
Total liabilitiesAt period end2025-12-31$447.4mus-gaap:Liabilities
Shareholders' equityAt period end2025-12-31$32.6mus-gaap:StockholdersEquity

Source: SEC EDGAR, the filing index for accession 0001193125-26-108598. Last ingested by Listed: Nov 10, 2026, 16:42 ET. Listed shows no prices and gives no investment advice.