Listed

Vishay Precision Group, Inc.: Form 10-Q for the period ended Mar 31, 2012

Filed with the SEC on May 9, 2012 and accepted by EDGAR at May 9, 2012, 07:01 ET.

Share

Management's discussion and analysis

As filed, 40,476 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Overview

VPG is an internationally recognized designer, manufacturer and marketer of components based on resistive foil technology, sensors and sensor-based systems specializing in the growing markets of stress, force, weight, pressure, and current measurements. We provide vertically integrated products and solutions that are primarily based upon our proprietary foil technology. These products are marketed under a variety of brand names that we believe are characterized as having a very high level of precision and quality. Our global operations enable us to produce a wide variety of products in strategically effective geographical locations that also optimize our resources for specific technologies, sensors, assemblies and systems.

The Company’s products are precision foil resistors, foil strain gages, and force sensors that convert mechanical force into an electronic signal for display, processing, interpretation, or control by our instrumentation and systems products. Precision sensors are essential to the accurate measurement, resolution and display of force, weight, pressure, torque, tilt, motion or acceleration, especially in the legal-for-trade, commercial, and industrial marketplace in a wide variety of applications. Our products are not typically used in the consumer market.

The precision sensor market is growing as a result of the significant increase in intelligent products across virtually all end markets, including medical, agricultural, transportation, industrial, avionics, military, and space applications. We believe that as original equipment manufacturers (“OEMs”) strive to make products “smarter”, they are generally integrating more sensors to link the analog/physical world with digital control and/or response.

Until July 6, 2010, our business was part of Vishay Intertechnology, and our assets and liabilities consisted of those that Vishay Intertechnology attributed to its precision measurement and foil resistor businesses. Since the spin-off on July 6, 2010, we have operated as an independent, publicly traded company, and Vishay Intertechnology does not retain any ownership interest in us.

Prior to the fourth quarter of 2011, we had two reporting segments: Foil Technology Products (the aggregation of our foil resistors and strain gage operating segments); and Weighing Modules and Control Systems (the aggregation of our transducers/load cells and weighing systems operating segments). As of December 31, 2011, based on our current expectations and in order to improve the reporting transparency of our financial information, we began to disclose the results of our operations based on three reporting segments: Foil Technology Products; Force Sensors (operating segment formerly referred to as transducers/load cells); and Weighing and Control Systems (operating segment formerly referred to as weighing systems). This presentation is consistent with management’s approach to reviewing our Company’s financial performance and making operating decisions. The Foil Technology Products reporting segment includes precision foil resistors and strain gages. The Force Sensors reporting segment is comprised of transducers, load cells and modules. The Weighing and Control Systems reporting segment is comprised of instruments, complete systems for process control and on-board weighing applications.

Net revenues for the fiscal quarter ended March 31, 2012 were $55.8 million versus $59.5 million for the comparable prior year period. Net earnings attributable to VPG stockholders for the fiscal quarter ended March 31, 2012 were $1.6 million, or $0.12 per diluted share, versus $3.3 million, or $0.24 per diluted share, for the comparable prior year period.

Financial Metrics

We utilize several financial measures and metrics to evaluate the performance and assess the future direction of our business. These key financial measures and metrics include net revenues, gross profit margin, end-of-period backlog, book-to-bill ratio, and inventory turnover.

Gross profit margin is computed as gross profit as a percentage of net revenues. Gross profit is generally net revenues less costs of products sold, but could also include certain other period costs. Gross profit margin is primarily a function of net revenues, but also reflects our cost-cutting programs and our ability to contain fixed costs.

End-of-period backlog is one indicator of potential future sales. We include in our backlog only open orders that have been released by the customer for shipment in the next twelve months. If demand falls below customers’ forecasts, or if customers do not control their inventory effectively, they may cancel or reschedule the shipments that are included in our backlog, in many instances without the payment of any penalty. Therefore, the backlog is not necessarily indicative of the results to be expected for future periods.

Another important indicator of demand in our industry is the book-to-bill ratio, which is the ratio of the amount of product ordered during a period compared with the product that we ship during that period. A book-to-bill ratio that is greater than one indicates that demand is higher than current revenues and manufacturing capacities and it indicates that we may generate increasing revenues in future periods. Conversely, a book-to-bill ratio that is less than one is an indicator of lower demand compared to existing revenues and current capacities and may foretell declining sales.

We focus on our inventory turnover as a measure of how well we are managing our inventory. We define inventory turnover for a financial reporting period as our costs of products sold for the four fiscal quarters ending on the last day of the reporting period divided by our average inventory (computed using each quarter-end balance) for this same period. A higher level of inventory turnover reflects more efficient use of our capital.

The quarter-to-quarter trends in these financial metrics can also be an important indicator of the likely direction of our business. The following table shows net revenues, gross profit margin, the end-of-period backlog, the book-to-bill ratio, and the inventory turnover for our business as a whole during the five quarters beginning with the first quarter of 2011 and through the first quarter of 2012 (dollars in thousands):

1st Quarter 2011 2nd Quarter 2011 3rd Quarter 2011 4th Quarter 2011 1st Quarter 2012
Net revenues $59,525 $62,133 $60,037 $56,412 $55,844
Gross profit margin 35.3% 35.6% 35.3% 33.4% 33.8%
End-of-period backlog $47,100 $48,500 $45,900 $42,400 $43,300
Book-to-bill ratio 1.09 1.02 0.97 0.95 1.01
Inventory turnover 3.17 3.27 3.11 3.02 2.99

See “Financial Metrics by Segment” below for net revenues, gross profit margin, end-of-period backlog, book-to-bill ratio, and inventory turnover broken out by segment.

Net revenues increased from the first to the second quarter of 2011; however, there has been a sequential decrease in revenues since the second quarter of 2011. The decline from the second to the third quarter reflects the historical seasonal slowdown in Europe. The decline from the third quarter to the fourth quarter of 2011 was the result of a significant decrease in demand from our European customer base and manufacturing capacity issues in our Foil Technology Products segment. The capacity issues have improved in the Foil Technology product segment in the first quarter of 2012, and demand from our European customer base has begun to improve.

Gross profit margins remained fairly consistent over the first three quarters of 2011 with a decline to 33.4% in the fourth quarter. The gross margins in the fourth quarter of 2011 were impacted by capacity issues in our Foil Technology Products segment and lower volume; start-up costs at our new India facility; and product mix in the Force Sensors segment. In the first quarter of 2012, the Foil Technology Products and Weighing and Control Systems segments increased slightly resulting in the 0.4% improvement.

Financial Metrics by Segment

The following table shows net revenues, gross profit margin, end-of-period backlog, book-to-bill ratio, and inventory turnover broken out by segment for the five quarters beginning with the first quarter of 2011 and through the first quarter of 2012 (dollars in thousands):

Foil Technology Products 1st Quarter 2011 2nd Quarter 2011 3rd Quarter 2011 4th Quarter 2011 1st Quarter 2012
Net revenues $28,178 $29,030 $28,407 $26,561 $27,801
Gross profit margin 44.3% 46.0% 43.1% 40.5% 40.7%
End-of-period backlog $24,800 $25,300 $24,000 $22,500 $21,500
Book-to-bill ratio 1.13 1.01 0.97 0.95 0.97
Inventory turnover 3.71 3.60 3.65 3.54 3.68
Force Sensors
Net revenues $17,738 $18,550 $18,029 $17,216 $16,603
Gross profit margin 20.3% 16.4% 21.6% 18.1% 17.9%
End-of-period backlog $13,800 $15,000 $14,100 $13,200 $14,600
Book-to-bill ratio 1.02 1.07 0.96 0.96 1.07
Inventory turnover 2.28 2.55 2.26 2.24 2.18
Weighing and Control
Systems
Net revenues $13,609 $14,553 $13,601 $12,635 $11,440
Gross profit margin 36.3% 39.1% 37.3% 39.2% 40.0%
End-of-period backlog $8,500 $8,200 $7,800 $6,700 $7,200
Book-to-bill ratio 1.11 0.97 0.99 0.93 1.03
Inventory turnover 5.04 4.87 4.74 4.59 4.17

Optimize Core Competence

The Company’s core products incorporate certain technologies to provide customers with precision foil products, force measurement sensors, and systems. Our foil technology products are recognized as global market leaders of strain gages and resistors that provide high precision and tight tolerance over extreme temperature ranges, and over a long period of time. Our force sensor products and our weighing and control systems products are also certified to meet some of the highest levels of precision measurements of force, weight, pressure, tilt, motion, torque, and acceleration. While these competencies form a solid basis for our products, we believe there are several areas that can be optimized, including: increasing our technical sales efforts; innovations in product performance and design; and refining our manufacturing processes.

Our foil technology research group continues to provide innovations that enhance the capability and performance of our strain gages, while simultaneously reducing their size and power consumption. We believe this new level of foil technology will create new markets as customers “design in” these next generation products in existing and new applications. Our development engineering team is also responsible for creating new processes to further automate manufacturing and improve productivity and quality.

Our design, research, and product development teams, in partnership with our marketing teams, drive our efforts to bring innovations to market. We intend to leverage our insights into customer demand to continually develop and roll out new, innovative products within our existing lines and to modify our existing core products in ways that make them more appealing, addressing changing customer needs and industry trends in terms of form, fit, and function.

Acquisition Strategy

To date, our growth and acquisition strategy largely focused on vertical product integration, using our foil strain gages in our force sensor products and incorporating our load cells and electronic measurement instrumentation and software into our weighing and control systems. Precision foil resistor products are also used in many of the control systems that we manufacture.

We expect to make strategic acquisitions, particularly where opportunities present themselves to grow our Force Sensors segment and our Weighing and Control Systems segment. Upon completion of acquisitions, we will seek to reduce selling, general, and administrative expenses through the integration or elimination of redundant sales offices and administrative functions at acquired companies. In addition, we believe acquired businesses will benefit from our current global manufacturing operations and distribution channels.

Research and Development

Research and development will continue to play a key role in our efforts to introduce innovative products to generate new sales and to improve profitability. We expect to continue to expand our position as a leading supplier of precision foil technology products. We believe our R&D efforts should provide us with a variety of opportunities to leverage technology, products, and our manufacturing base in order to ultimately improve our financial performance. To that end, we expect to increase our R&D expenditures in order to fill the product development pipeline and lay the foundation for future sales growth.

Cost Management

To be successful, we believe we must seek new strategies for controlling operating costs. Through automation in our plants, we believe we can optimize our capital and labor resources in production, inventory management, quality control, and warehousing. We are in the process of moving some manufacturing from higher-labor-cost countries to lower-labor-cost countries, such as Costa Rica, India, and Israel. This will enable us to become more efficient and cost competitive, and also maintain tighter controls of the operation.

A primary tenet of our business strategy is expansion through acquisitions. Our acquisition strategy includes a focus on reducing selling, general, and administrative expenses and achieving significant production cost savings at acquired companies. The plant closure and employee termination costs subsequent to acquisitions are also integral to our cost reduction programs.

Production transfers, facility consolidations, and other long-term cost-cutting measures require us to initially incur significant severance and other exit costs. We anticipate that we will realize the benefits of our restructuring through lower labor costs and other operating expenses in future periods. However, these programs to improve our profitability also involve certain risks which could materially impact our future operating results, as further detailed in Item 1A “Risk Factors” of our 2011 Annual Report on Form 10-K.

We did not initiate any new restructuring programs during the fiscal quarter ended March 31, 2012 or during 2011, and thus did not record any restructuring expenses during those periods.

We are presently executing plans to further reduce our costs by consolidating additional manufacturing operations with our expansion in India. These plans will require us to incur restructuring and severance costs in future periods. However, after implementing these plans, we do not anticipate significant restructuring and severance costs for our business except in the context of acquisition integration.

While streamlining and reducing fixed overhead, we are exercising caution so that we will not negatively impact our customer service or our ability to further develop products and processes.

Foreign Currency

We are exposed to foreign currency exchange rate risks, particularly due to transactions in currencies other than the functional currencies of certain subsidiaries. U.S. generally accepted accounting principles (“GAAP”) require that entities identify the “functional currency” of each of their subsidiaries and measure all elements of the financial statements in that functional currency. A subsidiary’s functional currency is the currency of the primary economic environment in which it operates. In cases where a subsidiary is relatively self-contained within a particular country, the local currency is generally deemed to be the functional currency. However, a foreign subsidiary that is a direct and integral component or extension of the parent company’s operations generally would have the parent company’s currency as its functional currency. We have subsidiaries that fall into each of these categories.

Foreign Subsidiaries which use the Local Currency as the Functional Currency

We finance our operations in Europe and certain locations in Asia using local currencies, and accordingly, these subsidiaries utilize the local currency as their functional currency. For those subsidiaries where the local currency is the functional currency, assets and liabilities in the consolidated condensed balance sheets have been translated at the rate of exchange as of the balance sheet date. Translation adjustments do not impact the results of operations and are reported as a separate component of equity.

For those subsidiaries where the local currency is the functional currency, revenues and expenses are translated at the average exchange rate for the year. While the translation of revenues and expenses into U.S. dollars does not directly impact the consolidated statement of operations, the translation effectively increases or decreases the U.S. dollar equivalent of revenues generated and expenses incurred in those foreign currencies.

Foreign Subsidiaries which use the U.S. Dollar as the Functional Currency

Our operations in Israel and certain locations in Asia are largely financed in U.S. dollars, and accordingly, these subsidiaries utilize the U.S. dollar as their functional currency. For those foreign subsidiaries where the U.S. dollar is the functional currency, all foreign currency financial statement amounts are remeasured into U.S. dollars. Exchange gains and losses arising from remeasurement of foreign currency-denominated monetary assets and liabilities are included in the results of operations. While these subsidiaries transact most business in U.S. dollars, they may have significant costs, particularly related to payroll, which are incurred in the local currency. For the fiscal quarter ended March 31, 2012, exchange rates negatively impacted net revenues by $0.6 million and positively impacted costs of products sold and selling, general, and administrative expenses by $0.8 million when compared to the comparable prior year period.

Results of Operations

Statement of operations’ captions as a percentage of net revenues and the effective tax rates were as follows:

Fiscal quarter ended March 31, 2012 April 2, 2011
Costs of products sold 66.2% 64.7%
Gross profit 33.8% 35.3%
Selling, general, and administrative expenses 29.6% 27.4%
Operating income 4.2% 7.9%
Income before taxes 4.5% 8.2%
Net earnings 2.9% 5.7%
Net earnings attributable to VPG stockholders 2.9% 5.5%
Effective tax rate 34.5% 31.0%

Net Revenues

Net revenues were as follows (dollars in thousands):

Fiscal quarter ended March 31, 2012 April 2, 2011
Net revenues $55,844 $59,525
Change versus comparable
prior year period $(3,681)
Percentage change versus
prior year period -6.2%

Changes in net revenues were attributable to the following:

Change attributable to: vs. prior year quarter
Change in volume -5.3%
Change in average selling prices 0.0%
Foreign currency effects -1.0%
Other 0.1%
Net change -6.2%

During the fiscal quarter ended March 31, 2012, our sales volume decreased in all of our reportable segments, compared to the comparable prior year period, primarily due to a drop in demand from our European customers that began in the third quarter of 2011.

Gross Profit and Margins

Gross profit as a percentage of net revenues was as follows:

Fiscal quarter ended March 31, 2012 April 2, 2011
Gross margin percentage 33.8% 35.3%

The decrease in the gross margin percentage was due to the reduction in volume discussed above and increased manufacturing fixed costs, such as wages, utilities, and depreciation.

Segments

Analysis of revenues and gross profit margins for our reportable segments is provided below.

Foil Technology Products

Net revenues of the Foil Technology Products segment were as follows (dollars in thousands):

Fiscal quarter ended March 31, 2012 April 2, 2011
Net revenues $27,801 $28,178
Change versus comparable
prior year period $(377)
Percentage change versus
prior year period -1.3%

Changes in Foil Technology Products segment net revenues were attributable to the following:

Change attributable to: vs. prior year quarter
Change in volume -1.3%
Change in average selling prices 0.3%
Foreign currency effects -0.4%
Other 0.1%
Net change -1.3%

Gross profit as a percentage of net revenues for the Foil Technology Products segment was as follows:

Fiscal quarter ended March 31, 2012 April 2, 2011
Gross margin percentage 40.7% 44.3%

The gross margin percentage decreased from the comparable prior year period largely due to reduction in volume, increases in variable costs, such as material usage and labor inefficiencies, and increased manufacturing fixed costs, including wages and utilities.

Force Sensors

Net revenues of the Force Sensors segment were as follows (dollars in thousands):

Fiscal quarter ended March 31, 2012 April 2, 2011
Net revenues $16,603 $17,738
Change versus comparable
prior year period $(1,135)
Percentage change versus
prior year period -6.4%

Changes in Force Sensors segment net revenues were attributable to the following:

Change attributable to: vs. prior year quarter
Change in volume -4.6%
Change in average selling prices -0.8%
Foreign currency effects -1.1%
Other 0.1%
Net change -6.4%

Gross profit as a percentage of net revenues for the Force Sensors segment was as follows:

Fiscal quarter ended March 31, 2012 April 2, 2011
Gross margin percentage 17.9% 20.3%

For the fiscal quarter ended March 31, 2012, the decrease in the gross margin percentage from the comparable prior year period is due to lower volume, and higher manufacturing fixed costs, which include the start-up costs associated with our new facility in India and wage increases.

Weighing and Control Systems

Net revenues of the Weighing and Control Systems segment were as follows (dollars in thousands):

Fiscal quarter ended March 31, 2012 April 2, 2011
Net revenues $11,440 $13,609
Change versus comparable
prior year period $(2,169)
Percentage change versus
prior year period -15.9%

-29-

Changes in the Weighing and Control Systems segment net revenues were attributable to the following:

Change attributable to: vs. prior year quarter
Change in volume -14.7%
Change in average selling prices 0.5%
Foreign currency effects -2.2%
Other 0.5%
Net change -15.9%

The large decrease in volume is primarily attributable to the reduction in on-board weighing revenues in Europe.

Gross profit as a percentage of net revenues for the Weighing and Control Systems segment were as follows:

Fiscal quarter ended March 31, 2012 April 2, 2011
Gross margin percentage 40.0% 36.3%

The gross margin percentage increased from the comparable prior year period mainly due to product mix. A portion of our European on-board weighing business, where the significant volume decrease occurred, has relatively low margins compared to the other lines of business in this segment. Therefore, while overall volume was down, gross margins increased compared to the comparable prior year period.

Selling, General, and Administrative Expenses

Selling, general, and administrative (“SG&A”) expenses are summarized as follows (dollars in thousands):

Fiscal quarter ended March 31, 2012 April 2, 2011
Total SG&A expenses $16,516 $16,333
as a percentage of net revenues 29.6% 27.4%

Given the specialized nature of our products and our direct sales approach, we incur significant selling, general, and administrative costs. SG&A expenses for the fiscal quarter ended March 31, 2012 were comparable to the fiscal quarter ended April 2, 2011.

Other Income (Expense)

Total interest expense for the fiscal quarter ended March 31, 2012 was comparable to the fiscal quarter ended April 2, 2011 and consists of interest on the exchangeable notes, our debt in Japan and the overdraft facility in India.

Foreign currency exchange gains and losses represent the impact of changes in foreign currency exchange rates with, among other things, the revaluation of balance sheet accounts. The change in foreign exchange gains during the period, as compared to the prior year period is largely due to the revaluation of the non-U.S. dollar-denominated assets at the Company's Israeli operations.

The following table analyzes the components of the line “Other” on the consolidated condensed statements of operations (in thousands):

Fiscal quarter ended March 31, 2012 April 2, 2011 Change
Foreign exchange gain $36 $141 $(105)
Interest income 193 78 115
Other (27) 61 (88)
$202 $280 $(78)

Income Taxes

For the current quarter, fluctuations in the effective tax rate have generally been caused by the geographical earnings mix and the impact of discrete items that are required to be recognized within the respective interim reporting period. The effective tax rate for the fiscal quarter ended March 31, 2012 was 34.5% versus 31.0% for the fiscal quarter ended April 2, 2011. The change in the effective tax rate is the result of the shift in the geographic mix of pretax earnings, offset by the inability to record a deferred tax benefit due to losses in certain foreign jurisdictions.

The effective tax rates reflect the fact that we could not recognize for accounting purposes the tax benefit of losses incurred in certain jurisdictions, although these losses may be available to offset future taxable income. We evaluate our deferred income taxes quarterly to determine if valuation allowances are required or should be adjusted. We give consideration to whether valuation allowances should be established against deferred tax assets based on all available evidence, both positive and negative, using a “more likely than not” standard. This assessment considers, among other matters, the nature, frequency and severity of current and cumulative losses, forecasts of future profitability, the duration of statutory carryforward periods, our experience with loss carryforwards not expiring and tax planning alternatives, as we operate and derive income across multiple jurisdictions. We may not recognize deferred tax assets for loss carryforwards in jurisdictions where there is a recent history of cumulative losses, where there is no taxable income in the carryback period, where there is insufficient evidence of future earnings to overcome the loss history and where there is no other positive evidence, such as the likely reversal of taxable temporary differences, that would result in the utilization of loss carryforwards for tax purposes.

We operate in an international environment with significant operations in various locations outside the U.S. Accordingly, the consolidated income tax rate is a composite rate reflecting our earnings and the applicable tax rates in the various locations where we operate. Part of our strategy is to achieve cost savings through the transfer and expansion of manufacturing operations to countries where we can benefit from lower labor costs and available tax and other government-sponsored incentives. Changes in the effective tax rate are largely attributable to changes in the mix of pretax income among our various taxing jurisdictions.

Additional information about income taxes is included in Note 3 to our consolidated condensed financial statements.

Financial Condition, Liquidity, and Capital Resources

At March 31, 2012 and December 31, 2011, we had significant cash balances and limited third-party debt. We believe that our current cash and cash equivalents, credit facilities and projected cash from operations will be sufficient to meet our liquidity needs for at least the next 12 months.

Effective July 6, 2010, we issued approximately $10.0 million aggregate principal amount of exchangeable notes pursuant to agreements entered into in connection with our spin-off from Vishay Intertechnology. The maturity date of these notes is December 13, 2102.

Our other long-term debt is not significant and consists of debt held by our Japanese subsidiary of approximately $1.5 million at March 31, 2012 and $1.7 million at December 31, 2011.

In 2010, we entered into a Credit Agreement among the Company, the lenders, RBS Citizens, National Association as joint book-runner and JPMorgan Chase Bank, National Association as agent for such lenders (the “Agent”), pursuant to which the lenders have made available to the Company a multi-currency, secured credit facility. The credit facility consists of a secured revolving facility in an aggregate principal amount of $25.0 million (the “Revolving Facility”) with sublimits of (i) $5.25 million which can be used for letters of credit, and (ii) up to $5.0 million which can be used for loans outstanding for up to 5 business days (“Swing Loans”). The Revolving Facility terminates on October 14, 2013.

Interest payable on the Revolving Facility is based upon the Agent’s prime rate, the Federal Funds Rate, or LIBOR (“Base Rate”). Depending upon the Company’s leverage ratio or the type of advance, an interest rate margin ranging from 0.00% to 2.75% per annum is added to the applicable Base Rate to determine the interest payable on the Revolving Facility. The Company paid a one-time fee on the commitment and is required to pay a quarterly fee of 0.30% per annum to 0.50% per annum on the unused portion of the Revolving Facility which is determined based on the Company’s leverage ratio each quarter. Additional customary fees apply with respect to letters of credit.

The obligations under the Revolving Facility are secured by pledges of stock in certain domestic and foreign subsidiaries, as well as guarantees by substantially all of the Company’s domestic subsidiaries. The obligations of the Company and the guarantors under the Revolving Facility are secured by substantially all the assets (excluding real estate) of the Company and such guarantors. The Credit Agreement restricts the Company from paying cash dividends and requires the Company to comply with other customary covenants, representations and warranties, including the maintenance of specific financial ratios.

The financial maintenance covenants include (a) a leverage ratio of not more than 2.5 to 1.0; and (b) a fixed charges coverage ratio of not less than 2.5 to 1.0. We were in compliance with all covenants at March 31, 2012 and December 31, 2011. Our leverage ratio at ratio at March 31, 2012 and December 31, 2011 was 0.5 to 1.0 and 0.4 to 1.0, respectively. Our fixed charges ratio at March 31, 2012 and December 31, 2011 was 11.4 to 1.0 and 9.9 to 1.0, respectively. We expect to continue to be in compliance with these covenants based on current projections. If we are not in compliance with all of the required financial covenants, the credit facility could be terminated by the lenders, and all amounts outstanding pursuant to the credit facility could become immediately payable.

On November 30, 2011, Vishay Advanced Technologies Ltd. (“VAT”), an Israeli company and subsidiary of the Company, entered into a Credit Agreement (the “Credit Agreement”) with HSBC Bank Plc (the “Lender”), pursuant to which the Lender has made available to VAT a multi-currency, secured revolving facility in an aggregate principal amount of $15.0 million (the “VAT Revolving Facility”). The VAT Revolving Facility terminates on November 30, 2014.

Interest payable on the VAT Revolving Facility is based upon LIBOR (“VAT Base Rate”). An interest rate margin of 2.15% per annum is added to the VAT Base Rate to determine the interest payable on the VAT Revolving Facility. VAT paid a one-time fee on the commitment and is required to pay a quarterly fee of 0.35% per annum on the unused portion of the VAT Revolving Facility.

The obligations under the VAT Revolving Facility are secured by guarantees by the Company and certain of its Israeli subsidiaries (such subsidiaries, the “Guarantors”). The obligations of VAT, the Company and the Guarantors under the VAT Revolving Facility are secured by substantially all the assets of VAT and the Guarantors. The Credit Agreement requires VAT to comply with customary covenants, representations and warranties, including the maintenance of specific financial ratios.

The financial maintenance covenants require VAT to maintain a leverage ratio of not more than 2.5 to 1.0 and a tangible net worth to total assets ratio of not less than 0.75 to 1.0. VAT was in compliance with all covenants at March 31, 2012 and December 31, 2011. The leverage ratio at March 31, 2012 and December 31, 2011 was 0.0 to 1.0 and 0.0 to 1.0, respectively. The tangible net worth to total asset ratio at March 31, 2012 and December 31, 2011 was 0.89 to 1.0 and 0.89 to 1.0, respectively. VAT expects to continue to be in compliance with these covenants based on current projections. If VAT is not in compliance with all of the required financial covenants, the credit facility could be terminated by the lenders, and all amounts outstanding pursuant to the credit facility could become immediately payable.

Due to our strong product portfolio and market position, our business has historically generated significant cash flow. This is evident in the fiscal quarter ended March 31, 2012 with cash generated from operations of $4.1 million. Our cash used in operating activities for the fiscal quarter ended April 2, 2011, however, was $2.4 million, which primarily resulted from approximately $4.3 million in tax payments made during the quarter.

We refer to the amount of cash generated from operations in excess of our capital expenditure needs and net of proceeds from the sale of assets as “free cash,” a measure which management uses to evaluate our ability to fund acquisitions. We have generated positive free cash for the period ended March 31, 2012 and historically have generated positive “free cash”. However, in 2011, significant tax payments made during the quarter ended April 2, 2011 caused us to use cash in, rather than generate cash from operating activities; cash flow was further reduced by the increase in our capital spending. As a result, we did not generate “free cash” in the period ended April 2, 2011.

Approximately 81% and 80% of our cash and cash equivalents balance at March 31, 2012 and December 31, 2011, respectively, was held by our non-U.S. subsidiaries. If cash is repatriated to the United States, we would be subject to additional U.S. income taxes (adjusted for foreign tax credits), state income taxes, incremental foreign income taxes, and withholding taxes payable to various foreign countries.

The following table summarizes the components of net cash (debt) at March 31, 2012 and December 31, 2011 (in thousands):

March 31 2012 December 31, 2011
Cash and cash equivalents $83,042 $80,828
Third-party debt, including current and long-term:
Revolving credit facility - -
Third-party debt held by Japanese subsidiary 1,542 1,690
Exchangeable notes due 2102 9,958 9,958
Total third-party debt 11,500 11,648
Net cash $71,542 $69,180

Measurements such as “free cash” and “net cash (debt)” do not have uniform definitions and are not recognized in accordance with U.S. Generally Accepted Accounting Principles (“GAAP”). Such measures should not be viewed as alternatives to GAAP measures of performance or liquidity. However, management believes that “free cash” is a meaningful measure of our ability to fund acquisitions, and that an analysis of “net cash (debt)” assists investors in understanding aspects of our cash and debt management. These measures, as calculated by us, may not be comparable to similarly titled measures used by other companies.

Our financial condition as of March 31, 2012 is strong, with a current ratio (current assets to current liabilities) of 5.0 to 1, as compared to a ratio of 4.8 to 1 at December 31, 2011. The increase in the current ratio is primarily due to an increase in prepaid expenses and inventory, and decreases in accounts payable. These changes were partially offset by decreases in accounts receivable and increases in payroll related liabilities, income taxes payable and other accrued liabilities.

Cash paid for property and equipment for the fiscal quarter ended March 31, 2012 was $2.6 million as compared to $2.9 million in the comparable prior year period. The decrease in capital spending as compared to the prior fiscal quarter is due to the significant spending which took place in 2011. Capital expenditures for 2011 were primarily required to: (1) construct a new manufacturing facility in India that will consolidate the majority of our existing manufacturing capacity in the Force Sensors segment into a low-labor-rate facility; (2) facilitate a new manufacturing line that will begin producing a new product offering in the Foil Technology Products segment; and (3) maintain our business systems and facilities. The majority of spending took place on these projects during 2011. As of March 31, 2012, approximately $2.0 million of spending remains for these projects.

Safe Harbor Statement

From time to time, information provided by us, including but not limited to statements in this report, or other statements made by or on our behalf, may contain "forward-looking" information within the meaning of the Private Securities Litigation Reform Act of 1995. Such statements involve a number of risks, uncertainties, and contingencies, many of which are beyond our control, which may cause actual results, performance, or achievements to differ materially from those anticipated.

Such statements are based on current expectations only, and are subject to certain risks, uncertainties, and assumptions. Should one or more of these risks or uncertainties materialize, or should underlying assumptions prove incorrect, actual results may vary materially from those anticipated, expected, estimated, or projected. Among the factors that could cause actual results to materially differ include: general business and economic conditions, changes in the current pace of economic recovery, including if such recovery stalls or does not continue as expected; difficulties in integrating acquired companies, the inability to realize anticipated synergies and expansion possibilities, unexpected costs or difficulties related to our spinoff and other unanticipated conditions adversely affecting the operation of these companies; difficulties in new product development; changes in competition and technology in the markets that we serve and the mix of our products required to address these changes; changes in foreign currency exchange rates; difficulties in implementing our cost reduction strategies such as underutilization of production facilities, labor unrest or legal challenges to our layoff or termination plans, , operation of redundant facilities due to difficulties in transferring production to lower-labor-cost countries; and other factors affecting our operations, markets, products, services, and prices that are set forth in our Annual Report on Form 10-K for the year ended December 31, 2011. We undertake no obligation to publicly update or revise any forward-looking statements, whether as a result of new information, future events, or otherwise.

Market risk

As filed, 269 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

There have been no material changes in the market risks previously disclosed in Part II, Item 7A, “Quantitative and Qualitative Disclosures About Market Risk”, of our Annual Report on Form 10-K for the year ended December 31, 2011, filed with the SEC on March 12, 2012.

Controls and procedures

As filed, 1,308 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Disclosure Controls and Procedures

An evaluation was performed under the supervision and with the participation of our management, including the Chief Executive Officer (“CEO”) and Chief Financial Officer (“CFO”), of the effectiveness of the design and operation of our disclosure controls and procedures, as such term is defined under Rule 13a-15(e) and Rule 15d-15(e) promulgated under the Securities Exchange Act of 1934, as amended (the “Exchange Act”). Based on that evaluation, our CEO and CFO concluded that our disclosure controls and procedures were effective as of the end of the period covered by this quarterly report to ensure that information required to be disclosed in reports that we file or submit under the Exchange Act are: (1) recorded, processed, summarized, and reported within the time periods specified in the SEC’s rules and forms; and (2) accumulated and communicated to our management, including our CEO and CFO, as appropriate to allow timely decisions regarding required disclosure.

Changes in Internal Control over Financial Reporting

There were no changes in our internal control over financial reporting during the period covered by this report that have materially affected, or are reasonably likely to materially affect our internal control over financial reporting.

Risk factors

As filed, 194 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

There have been no material changes from the risk factors previously disclosed in our Annual Report on Form 10-K for the fiscal year ended December 31, 2011 filed with the SEC on March 12, 2012.

Figures reported in this filing

Standardized line items from the XBRL in this filing, for the period ended 2012-03-31. Comparative periods it repeats are left out.

Figures reported in this filing
Line itemPeriodValueXBRL concept
Revenue3 months2012-01-01 to 2012-03-31$55.8mus-gaap:Revenues
Cost of revenue3 months2012-01-01 to 2012-03-31$37.0mus-gaap:CostOfGoodsSold
Gross profit3 months2012-01-01 to 2012-03-31$18.9mus-gaap:GrossProfit
Selling, general and administrative3 months2012-01-01 to 2012-03-31$16.5mus-gaap:SellingGeneralAndAdministrativeExpense
Operating income3 months2012-01-01 to 2012-03-31$2.4mus-gaap:OperatingIncomeLoss
Interest expense3 months2012-01-01 to 2012-03-31$72.0kus-gaap:InterestExpense
Income tax3 months2012-01-01 to 2012-03-31$860.0kus-gaap:IncomeTaxExpenseBenefit
Net income3 months2012-01-01 to 2012-03-31$1.6mus-gaap:NetIncomeLoss
Diluted EPS3 months2012-01-01 to 2012-03-31$0.12us-gaap:EarningsPerShareDiluted
Basic EPS3 months2012-01-01 to 2012-03-31$0.12us-gaap:EarningsPerShareBasic
Diluted shares (weighted)3 months2012-01-01 to 2012-03-3113,868,000 sharesus-gaap:WeightedAverageNumberOfDilutedSharesOutstanding
Operating cash flow3 months2012-01-01 to 2012-03-31$4.1mus-gaap:NetCashProvidedByUsedInOperatingActivities
Capital expenditure3 months2012-01-01 to 2012-03-31$2.6mus-gaap:PaymentsToAcquireProductiveAssets
Cash and equivalentsAt period end2012-03-31$83.0mus-gaap:CashAndCashEquivalentsAtCarryingValue
Current assetsAt period end2012-03-31$180.8mus-gaap:AssetsCurrent
Total assetsAt period end2012-03-31$258.9mus-gaap:Assets
Current liabilitiesAt period end2012-03-31$36.0mus-gaap:LiabilitiesCurrent
Total liabilitiesAt period end2012-03-31$70.9mus-gaap:Liabilities
Long-term debtAt period end2012-03-31$11.3mus-gaap:LongTermDebtNoncurrent
Current portion of debtAt period end2012-03-31$174.0kus-gaap:LongTermDebtCurrent
Shareholders' equityAt period end2012-03-31$187.8mus-gaap:StockholdersEquity

Source: SEC EDGAR, the filing index for accession 0001206774-12-001942. Last ingested by Listed: Nov 4, 2026, 08:34 ET. Listed shows no prices and gives no investment advice.