Listed

Techprecision Corp: Form 10-Q for the period ended Dec 31, 2009

Filed with the SEC on Feb 16, 2010 and accepted by EDGAR at Feb 16, 2010, 16:05 ET.

Share

Management's discussion and analysis

As filed, 40,505 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Statement Regarding Forward Looking Disclosure

The following discussion of the results of our operations and financial condition should be read in conjunction with our financial statements and the related notes, which appear elsewhere. This quarterly report of on Form 10-Q, including this section entitled “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” may contain predictive or “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements include, but are not limited to, statements that express our intentions, beliefs, expectations, strategies, predictions or any other statements relating to our future activities or other future events or conditions. These statements are based on current expectations, estimates and projections about our business based in part on assumptions made by management. These statements are not guarantees of future performance and involve risks, uncertainties and assumptions that are difficult to predict. Therefore, actual outcomes and results may, and probably will, differ materially from what is expressed or forecasted in the forward-looking statements due to numerous factors. Those factors include those risks discussed under “Management’s Discussion and Analysis” in our Form 10-K for the year ended March 31, 2009 and this Item 2 in this Form 10-Q for the quarter ended December 31, 2009 and those described in any other filings which we make with the SEC. In addition, such statements could be affected by risks and uncertainties related to the U.S. and global economies, to our ability to generate business on an on-going business, to obtain any required financing, to receive contract awards from the competitive bidding process, maintain standards to enable us to manufacture products to exacting specifications, enter new markets for our services, market and customer acceptance, our reliance on a small number of customers for a significant percentage of our business, competition, government regulations and requirements, pricing and development difficulties, our ability to make acquisitions and successfully integrate those acquisitions with our business, as well as general industry and market conditions and growth rates, and general economic conditions. We undertake no obligation to publicly update or revise any forward-looking statements to reflect events or circumstances that may arise after the date of this report, except as required by applicable law.

Any forward-looking statements speak only as of the date on which they are made, and we do not undertake any obligation to update any forward-looking statement to reflect events or circumstances after the date of this report. Investors should evaluate any statements made by the Company in light of these important factors.

Overview

We offer a full range of services required to transform raw material into precise finished products. Our manufacturing capabilities include: fabrication operations which include cutting, press and roll forming, assembly, welding, heat treating, blasting and painting; and machining operations which include CNC (computer numerical controlled) horizontal and vertical milling centers. We also provide support services in addition to our manufacturing capabilities: which include manufacturing engineering (planning, fixture and tooling development, manufacturability), quality control (inspection and testing), and production control (scheduling, project management and expediting).

All manufacturing is done in accordance with our written quality assurance program, which meets specific national and international codes, standards, and specifications. Ranor holds several certificates of authorization issued by the American Society of Mechanical Engineers and the National Board of Boiler and Pressure Vessel Inspectors. The standards used are specific to the customers’ needs, and our manufacturing operations are conducted in accordance with these standards.

During the last several years, the demand for our services has been relatively strong. However, during the Company’s third quarter ended December 31, 2008, recessionary pressures began to impact the requirements of our customers. GT Solar, which has been our largest customer for each of the past three fiscal years, slowed production significantly during the second half of the fiscal year ended March 31, 2009 and in April 2009, canceled the majority of its outstanding purchase orders. During the past fourteen months, other customers have delayed deliveries of existing orders and have delayed the placement of new orders. Recently we have begun to see an improvement in the volume of requests for quotes and order placements from our customers. We ended the third quarter with an order backlog of $15.7 million as of December 31, 2009 and our order backlog increased further during January 2010 to $18.1 million as of January 31, 2010. On January 19, 2010 our largest customer, GT Solar placed an order for increased production totaling $3.8 million. This is the first new purchase order we have received from GT Solar since they cancelled the majority of their open purchase orders with the Company back in April 2009.

A significant portion of our revenue is generated by a small number of customers. During the nine months ended December 31, 2009, our largest customer, GT Solar, accounted for approximately 50% of our revenue and our second largest customer, BAE Systems, accounted for approximately 16% of our revenue, while all other customers made up less than 10% of our revenue on an individual basis. For the nine months ended December 31, 2008, our largest customer, GT Solar, accounted for 62% of our revenue.

Our contracts are generated both through negotiation with customers and from bids made pursuant to requests for proposals. Our ability to receive contract awards is dependent upon the contracting party’s perception of such factors as our ability to perform on time, our history of performance, our financial condition and our ability to price our services competitively. Although some of our contracts contemplate the manufacture of one or a limited number of units, we are seeking more long-term projects with a more predictable cost structure. During the nine months ended December 31, 2009, our sales and net income were $23.7 million and $1.4 million, as compared to sales of $33.8 million and net income of $5.1 million, for the nine months ended December 31, 2008. Our gross margin for the nine months ended December 31, 2009 was 18% as compared to 33% in the nine months ended December 31, 2008, reflecting higher overhead absorption on lower sales volume and reduced capacity. Both net sales and gross margin declined in the nine months ended December 31, 2009, and the global economic downturn continues to have an adverse impact on our customers. In August 2009, we completed the transfer of inventory to GT Solar as part of their April 2009 cancellation. Accordingly, our revenue for the nine month period ended December 31, 2009, includes $8.9 million of revenue related to materials transferred to GT Solar as part of their order cancellation. The inventory transfer included a heavy mix of raw materials and therefore carried a lower margin than we typically generate through the sale of finished products.

Because our revenues are derived from the sale of goods manufactured pursuant to a contract, and we do not sell from inventory, it is necessary for us to constantly seek new contracts. There may be a time lag between our completion of one contract and commencement of work on another contract. During such a period, we would continue to incur overhead expense while generating lower revenue. Furthermore, changes in either the scope of a contract or the delivery schedule may impact the revenue we receive under the contract and the allocation of manpower.

As of December 31, 2009, we had a backlog of orders totaling approximately $15.7 million, of which approximately $1.6 million represented orders from GT Solar. Our corresponding backlog as of December 31, 2008 was $40.0 million of which GT Solar represented 73%. As of January 31, 2010, the Company’s backlog was $18.1 million, including open purchase orders totaling $4.7 million from GT Solar.

Although we provide manufacturing services for large governmental programs, we usually do not work directly for agencies of the United States government. Rather, we perform our services for large governmental contractors and large utility companies. However, our business is dependent in part on the continuation of governmental programs which require the services we provide.

Growth Strategy

Our strategy is to leverage our core competence as a manufacturer of high-precision, large-scale metal fabrications and machined components to expand our business into areas which have shown increasing demand and which we believe could generate higher margins.

Diversifying Our Core Industries

We believe that rising energy demands along with increasing environmental concerns are likely to continue to drive demand in the alternative energy industry, particularly the solar, wind and nuclear power industries. Because of our capabilities and the nature of the equipment required by companies in the alternative energy industries, we intend to focus our services in this sector. We also expect to market our services for medical device applications where customer requirements demand strict tolerances and an ability to manufacture complex heavy equipment.

As a result of both the increased prices of oil and gas and the resulting greenhouse gas emissions, nuclear power may become an increasingly important source of energy. In January 2010, the Obama administration increased the level of government-backed debt guarantees from $18 billion to $56 billion as an incentive to support the construction of new nuclear plants in the U.S. Revenues derived from the nuclear power industry were $1.6 million for the nine months ended December 31, 2009 and currently constitute approximately 9% of our backlog. Because of our manufacturing capabilities, our certification from the American Society of Mechanical Engineers and our historic relationships with suppliers in the nuclear power industry, we believe that we are well positioned to benefit from any increased activity in the nuclear sector. However, we cannot assure you that we will be able to develop any significant business from the nuclear industry.

In addition to the nuclear energy industry, we are also exploring potential business applications focused on the medical industry. These efforts include the development and fabrication of medical isotopes storage solutions and the development and fabrication of critical components for proton beam therapy machines designed to be utilized in the treatment of cancer. Net sales from our proton beam therapy customer accounted for 4% of our total net sales for the nine months ended December 31, 2009 while sales to our medical isotope customer were not significant during the nine months ended December 31, 2009.

Expansion of Manufacturing Capabilities

In addition to the possible expansion of our existing manufacturing capabilities, we may, from time to time, pursue opportunistic acquisitions to increase and strengthen our manufacturing, marketing, product development capabilities and customer diversification. We do not have any current plans for any acquisition, and we cannot give any assurance that we will complete any acquisition. On January 8, 2010, the Company issued a purchase order for the purchase of a gantry mill totaling $2.3 million. This purchase commitment represents an investment necessary to refresh and upgrade the Company’s fleet of manufacturing equipment and capabilities. With this purchase commitment, the Company is obligated to make three equal payments: the first payment was made in January 2010, the second payment will be made in April or May of 2010, and the final payment will be made upon final delivery approximately one year from the purchase order date. The Company intends to borrow up to 80% of the purchase price in order to finance these payments.

Impact of Recent Legislation

The Congress has passed and the President has signed the $800 billion American Recovery and Reinvestment Act of 2009 into law. Significant components of the bill allow manufacturing concerns to apply various tax credits and apply for government loan guarantees for the development or retooling of existing facilities using electricity derived from renewable and previously underutilized sources. The Company has historically derived significant revenues from contracts with manufacturing concerns in these alternative energy fields. The American Recovery and Reinvestment Act extended the 50% Bonus depreciation enacted as a part of the Economic Stimulus Act of 2008. Under the Act, 50% of the basis of the qualified property may be deducted in the year the property is placed in service (i.e. 2008 and 2009). The remaining 50% is recovered under otherwise applicable depreciation rules. This significant tax incentive could drive increased demand on the part of some customers.

Critical Accounting Policies

The preparation of the Company’s financial statements in conformity with generally accepted accounting principles in the United States requires our management to make assumptions, estimates and judgments that affect the amounts reported in the financial statements, including all notes thereto, and related disclosures of commitments and contingencies, if any. We rely on historical experience and other assumptions we believe to be reasonable in making our estimates. Actual financial results of the operations could differ materially from such estimates. There have been no significant changes in the assumptions, estimates and judgments used in the preparation of our financial statements for the three and nine months ended December 31, 2009 from the assumptions, estimates and judgments used in the preparation of our audited financial statements for the year ended March 31, 2009.

Revenue Recognition and Costs Incurred

We derive revenues from (i) the fabrication of large metal components for our customers; (ii) the precision machining of such large metal components, including incidental engineering services; and (iii) the installation of such components at the customers’ locations when the scope of the project requires such installations.

Revenue and costs are recognized on the units of delivery method. This method recognizes as revenue the contract price of units of the product delivered during each period and the costs allocable to the delivered units as the cost of earned revenue. When the sales agreements provide for separate billing of engineering services, the revenues for those services are recognized when the services are completed. Costs allocable to undelivered units are reported in the balance sheet as costs incurred on uncompleted contracts. Amounts in excess of agreed upon contract price for customer directed changes, constructive changes, customer delays or other causes of additional contract costs are recognized in contract value if it is probable that a claim for such amounts will result in additional revenue and the amounts can be reasonably estimated. Revisions in cost and profit estimates are reflected in the period in which the facts requiring the revision become known and are estimable. The unit of delivery method requires the existence of a contract to provide the persuasive evidence of an arrangement and determinable seller’s price, delivery of the product and reasonable collection prospects. The Company has written agreements with the customers that specify contract prices and delivery terms. The Company recognizes revenues only when the collection prospects are reasonably assured.

Adjustments to cost estimates are made periodically, and losses expected to be incurred on contracts in progress are charged to operations in the period such losses are determined and are reflected as reductions of the carrying value of the costs incurred on uncompleted contracts. Costs incurred on uncompleted contracts consist of labor, overhead, and materials. Work in process is stated at the lower of cost or market and reflects accrued losses, if required, on uncompleted contracts.

Variable Interest Entity

We have consolidated WM Realty, a variable interest entity from which we lease our real estate.

Income Taxes

We provide for federal and state income taxes currently payable, as well as those deferred because of temporary differences between reporting income and expenses for financial statement purposes versus tax purposes. Deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences between carrying amount of assets and liabilities for financial reporting purposes and the amounts used for income tax purposes. Deferred tax assets and liabilities are measured using the enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recoverable. The effect of the change in the tax rates is recognized as income or expense in the period of the change. A valuation allowance is established, when necessary, to reduce deferred income taxes to the amount that is more likely than not to be realized.

As of December 31, 2009, the Company’s federal net operating loss carry-forward was approximately $2 million. If not utilized, the federal net operating loss carry-forward of Ranor and TechPrecision will expire in 2025 and 2027, respectively. Furthermore, because of the over fifty-percent change in ownership as a consequence of the reverse acquisition in February 2006, the amount of net operating loss carry forward used in any one year in the future is substantially limited.

New Accounting Pronouncements

See Note 2, Significant Accounting Policies, in the Notes to the Consolidated Financial Statements.

Results of Operations

Our results of operations are affected by a number of external factors including the availability of raw materials, commodity prices (particularly steel), macro economic factors, including the availability of capital that may be needed by our customers, and political, regulatory and legal conditions in the United States and foreign markets.

Our results of operations are also affected by a number of other factors including, among other things, success in booking new contracts and when we are able to recognize the related revenue, delays in customer acceptances of our products, delays in deliveries of ordered products and our rate of progress in the fulfillment of our obligations under our contracts. A delay in deliveries or cancellations of orders would cause us to have inventories in excess of our short-term needs, and may delay our ability to recognize, or prevent us from recognizing, revenue on contracts in our order backlog.

Recent disruptions in the global capital markets have resulted in reduced availability of funding worldwide and a higher level of uncertainty experienced by some end-user solar cell module manufacturers. As a result, our customers have made reductions in their direct labor workforce and reported decreases in their order backlogs as well as adjustments to the procurement of materials in their photovoltaic related production. In April, 2009, GT Solar, our largest customer cancelled the majority of their open purchase orders with us and in August 2009 we completed the material transfer of $8.9 million to GT Solar to finalize the order cancellation. While we have open orders and backlog with GT Solar they are not at comparable levels prior to the cancellation. On January 19, 2010, we received an order from GT Solar for $3.8 million of new production. This is the first new production order we have received from GT Solar since their April 2009 cancellation of a majority of their then open purchase orders.

Three Months Ended December 31, 2009 and 2008

The following table sets forth information from our statements of operations for the three months ended December 31, 2009 and 2008, in dollars and as a percentage of revenue (dollars in thousands):

2009 Amount Percent 2008 Amount Percent Changes Three Months Ended December 31 2009 to 2008 Amount Percent
Net sales $5,255 100% $8,555 100% $(3,300) (39)%
Cost of sales 4,241 81% 5,933 69% (1,692) (29)%
Gross profit 1,014 19% 2,622 31% (1,608) (61)%
Payroll and related costs 359 7% 331 4% 28 8%
Professional expense 104 2% 63 1% 41 65%
Selling, general and administrative 527 10% 145 2% 382 263%
Total operating expenses 990 19% 539 6% 451 84%
Income from operations 24 0% 2,083 24% (2,059) (99)%
Interest expense (108) (2)% (111) (1)% 3 3%
Other income (expense) 12 0% (4) 0% 16 400%
Income before income taxes (72) (1)% 1,968 23% (2,040) (104)%
Income tax expense (benefit) (276) (5)% 955 (11)% (1,231) (129)%
Net income $204 4% $1,013 12% $(809) (80)%

20

Net Sales

Net sales decreased by $3.3 million, or 39%, from $8.5 million for the three months ended December 31, 2008 to $5.2 million for the three months ended December 31, 2009. Net sales were negatively impacted by the global recession and downturn in the solar industry which affected orders from our largest customer, GT Solar.

Cost of Sales and Gross Margin

Our cost of sales for the three months ended December 31, 2009 decreased by $1.7 million to $4.2 million, or 29%, from $5.9 million for the three months ended December 31, 2008. The decrease in the cost of sales was principally due to the impact of lower order levels from customers due to the global recession and downturn in the solar industry. The decline in gross profit margin was $1.6 million, or 61%, from $2.6 million or 31% of net sales, during the three months ended December 31, 2008 to $1.0 million or 19% of sales for the period ending December 31, 2009. Contributing to the decline in gross margin were costs associated with underutilized capacity. In addition, the mix of completed projects during the three month period ended December 31, 2009 included a higher percentage of projects in which the customers supplied raw materials and therefore did not include material procurement services from the Company.

Operating Expenses

Our payroll and related costs were $358,841 for the three months ended December 31, 2009 as compared to $330,701 for the three months ended December 30, 2008. The $28,140 (8%) increase in payroll is due primarily to an increase in compensation compared to the same three month period in the prior year.

Professional fees increased from $63,847 for the three months ended December 31, 2008 to $104,132 for the three months ended December 31, 2009. This increase was primarily attributable to an increase in legal and accounting costs related to contract reviews and various SEC filing requirements.

Selling, administrative and other expenses for the three months ended December 31, 2009 were $527,133 compared to $144,825 for three months ended December 31, 2008, an increase of $382,308. Primary components of the increase were additional expenditures related to bad debt expense of $235,000 during the quarter, increased consulting fees totaling $75,000, and increased employee compensation costs of $72,000.

Interest Expense

Interest expense decreased for the three months ended December 31, 2009 to $108,049 compared with $111,052 for the three months ended December 31, 2008 due to lower average levels of long-term debt during the period.

Income Taxes

For the three months ended December 31, 2009, the Company recorded a tax benefit of $276,415 while during the comparable period in 2008, the Company recorded a provision for Federal and state income tax expense of $954,562. The estimated annual effective income tax rate for the current fiscal year is 26%. The effective tax expense rate for the three months ended December 31, 2008 was 43%. The difference between the provision for income taxes and the income tax determined by applying the statutory federal income tax rate of 34% was due primarily to differences in the lives and methods used to depreciate and/or amortize our property and equipment, timing differences of expenses related to compensated absences, and the expected utilization of net operating loss carryforwards. The Company also recognized a deferred tax asset and a federal tax refund during the three month period ended December 31, 2009, which reduced the tax provision by $287,487.

Net Income

As a result of the foregoing, our net income was $204,697 or $0.01 and $0.01 per share basic and diluted, respectively, for the three months ended December 31, 2009, as compared to net income of $1.0 million or $0.07 and $.0.04 per share basic and diluted, respectively, for the three months ended December 31, 2008.

Results of Operations for the Nine Months Ended December 31, 2009 and 2008

The following table sets forth information from our statements of operations for the nine months ended December 31, 2009 and 2008, in dollars and as a percentage of revenue (dollars in thousands):

2009 Amount Percent 2008 Amount Percent Changes Nine Months Ended December 31, 2009 to 2008 Amount Percent
Net sales $23,692 100% $33,814 100% $(10,122) (30)%
Cost of sales 19,467 82% 22,798 67% (3,331) (15)%
Gross profit 4,225 18% 11,016 33% (6,791) (62)%
Payroll and related costs 1,083 5% 1,088 3% (5) (0)%
Professional expense 291 1% 184 1% 107 58%
Selling, general and admin 1,052 4% 434 1% 618 142%
Total operating expenses 2,426 10% 1,706 5% 720 42%
Income from operations 1,799 8% 9,310 28% (7,511) (81)%
Interest (expense) (320) (2)% (345) (1)% 25 7%
Other income (expense) 12 0% (13) (0)% 25 192%
Income before income taxes 1,491 6% 8,952 27% (7,461) (83)%
Provision for income taxes 90 0% 3,891 12% (3,801) (98)%
Net income $1,401 6% $5,061 15% $(3,660) (72)%

Net Sales

Net sales decreased by $10.1 million, or 30%, from $33.8 million for the nine months ended December 30, 2008 to $23.7 million for the nine months ended December 31, 2009. A significant portion of the decrease resulted from lower sales volume with our largest customer, GT Solar. Also, the global economic downturn adversely impacted our business during much of the first nine months of fiscal year 2010.

Cost of Sales and Gross Margin

Our cost of sales for the nine months ended December 31, 2009 decreased by $3.3 million to $19.5 million, a decrease of 15%, from $22.8 million for nine months ended December 31, 2008. The decrease in the cost of sales was principally due to the reduction in sales volume. The decline in gross profit margin was $6.8 million (62%) from $11.0 million, or 33% of sales, during the nine months ended December 30, 2008 to $4.2 million or 18% of sales for the period ending December 31, 2009. Contributing to the decline in gross margin were costs associated with underutilized capacity and the inventory transfer to GT Solar which included a high volume of raw material priced at a marginal mark-up to cost.

Operating Expenses

All of our payroll and related cost components were almost unchanged at $1.1 million for the nine months ended December 31, 2009 and 2008.

Professional fees increased from $184,316 for the nine months ended December 31, 2008 to $290,755 for the nine months ended December 30, 2009, primarily attributable to an increase in legal costs related to contract review, SEC filing requirements and the cost of the Company’s annual shareholder meeting.

Selling, general and administrative expenses were $1,052,127 and $433,959 for the nine months ended December 31, 2009 and 2008, respectively, an increase of $618,168 or 142%, primarily related to increased bad debt expense of $235,000, increased consulting expenditures of $233,000, increased severance pay of $112,000 and costs associated with the Company’s first annual shareholder meeting.

Interest Expense

Interest expense for the nine months ended December 31, 2009 was $319,601 compared with $344,923 for the nine months ended December 31, 2008. A decrease of $25,322 (7%) is the result of lower average levels of long-term debt outstanding at December 31, 2009 as compared to December 30, 2008.

Income Taxes

For the nine months ended December 31, 2009 and 2008, the Company recorded provisions for Federal and State income tax expense of $90,288 and $3,890,780, respectively. The estimated annual effective tax rate for the current fiscal year is 26%. The effective tax expense rate for the nine months ended December 31, 2008 was 43.5%. The difference between the provision for income taxes and the income tax determined by applying the statutory federal income tax rate of 34% was due primarily to differences in the lives and methods used to depreciate and/or amortize our property and equipment, timing differences of expenses related compensated absences, and the expected utilization of net operating loss carryforwards. The Company also recognized a deferred tax asset and a federal tax refund during the period which reduced the tax provision by $287,487 thereby lowering the effective tax rate for the nine month period ending December 31, 2009 to 6.1%.

Net Income

As a result of the foregoing, our net income was $1,400,586 or $0.10 basic and $0.07 diluted per share for the nine months ended December 31, 2009, as compared to net income of $5.1million or $0.37 basic and $0.19 diluted per share for the nine months ended December 31, 2008.

Liquidity and Capital Resources

At December 31, 2009, we had working capital of $13.0 million as compared with working capital of $11.1 million at March 31, 2009, an increase of $1.9 million or 17%. The following table sets forth information as to the principal changes in the components of our working capital:

(dollars in thousands)

December 31, 2009 March 31, 2009 Change Amount Percentage Change
Cash and cash equivalents $9,374 $10,463 $(1,089) (10)%
Accounts receivable, net 1,981 1,419 562 40%
Costs incurred on uncompleted contracts 3,783 3,661 122 3%
Raw material inventories 296 351 (55) (16)%
Prepaid expenses 825 1,583 (758) (48)%
Deferred tax asset 157 -- 157 --%
Other receivables 30 60 (30) (50)%
Accounts payable 465 951 (486) (51)%
Accrued expenses 499 710 (211) (30)%
Accrued taxes -- 156 (156) (100)%
Progress billings in excess of cost of uncompleted contracts 1,705 3,945 (2,240) (57)%
Current maturity of long-term debt 811 625 186 30%

Cash used in operations was $1.4 million for the nine months ended December 31, 2009 as compared with cash provided by operations of $4.3 million for the nine months ended December 31, 2008. The decrease in cash flows from operations is the result of a significant reduction in customer orders and net income year-over-year, and cash payments made for estimated federal and state taxes. Order backlog at December 31, 2009 is $15.7million compared with $40 million at December 31, 2008. As of January 31, 2010, the Company’s order backlog had increased to $18.1 million principally due to a $3.8 million order from GT Solar on January 19, 2010. Accounts receivable and costs incurred on uncompleted contracts have increased since March 31, 2009 reflecting a small incremental increase in sales and customer orders recorded since the first quarter. Prepaid expenses have decreased since March 31, 2009 as certain prepaid materials and services were transferred to inventory and consumed in production, offset in part by cash payments made for taxes. Accounts payable and accrued expenses reflect a decrease in purchase activity due to lower customer orders over the nine month period and a recent reduction in accrued compensation because of reduced factory headcount. Progress billings have decreased since March 31, 2009 primarily reflecting the revenue recognized in connection with the materials transferred to GT Solar as part of their April 2009 order cancellation.

Net cash provided by financing activities was $285,930 for the nine months ended December 31, 2009 as compared with net cash used of $430,528 for the nine months ended December 30, 2008. During the nine months ended December 31, 2009, we received $6,648 from the exercise of stock options, and borrowed $919,297 under a line of credit facility in August 2009 to finance the purchase of new equipment placed into service during the first half of the fiscal year. We paid down $499,388 of principal on our debt and capital lease obligations.

During the nine months ended December 31, 2009, the installation of equipment under construction has been fully completed, placed into service and was transferred to property, plant and equipment. For the nine months ended December 31, 2008 we invested $27,173 in new property, plant and equipment and received proceeds of $12,000 from the sale of equipment.

All of the above activity resulted in a net decrease in cash of $1.1million for the nine months ended December 31, 2009 compared with a $3.1 million increase in cash for the nine months ended December 31, 2008.

On January 8, 2010, the Company issued a purchase order for the purchase of a gantry mill totaling $2.3 million. The Company has committed to make three equal payments beginning in January 2010, in April or May of 2010, and upon final delivery approximately one year from the purchase order date. The Company intends to borrow up to 80% of the purchase price in order to finance this purchase. This purchase commitment represents an investment necessary to refresh and upgrade the Company’s fleet of manufacturing equipment and capabilities.

Debt Facilities

At December 31, 2009, WM Realty had an outstanding mortgage of $3.1 million on the real property that it leases to Ranor. The mortgage has a term of ten years, maturing November 1, 2016, bears interest at 6.75% per annum, and provides for monthly payments of principal and interest of $20,955. The monthly payments are based on a thirty-year amortization schedule, with the unpaid principal being due in full at maturity. WM Realty has the right to prepay the mortgage note upon payment of a prepayment premium of 5% of the amount prepaid if the prepayment is made during the first two years, and declining to 1% of the amount prepaid if the prepayment is made during the ninth or tenth year.

We have a loan and security agreement with Sovereign Bank, dated February 24, 2006, pursuant to which we borrowed $4.0 million on a term loan basis in connection with our acquisition of Ranor. As a result of amendments to the loan and security agreement, we currently have a $2.0 million revolving credit facility which is available until June 30, 2010. At December 31, 2009, there were no borrowings under the revolving note and the maximum available under the borrowing formula was $2.0 million.

The term note issued on February 24, 2006 has a term of 7 years with an initial fixed interest rate of 9%. The interest rate on the term note converts from a fixed rate of 9% to a variable rate on February 28, 2011. From February 28, 2011 until maturity the term note will bear interest at the prime rate plus 1.5%, payable on a quarterly basis. Principal is payable in quarterly installments of $142,857 plus interest, with a final payment due on March 1, 2013.

The Term Note is subject to various covenants that include the following: the loan collateral comprises all personal property of the Company, including cash, accounts receivable inventories, equipment, financial and intangible assets. The company must also maintain a ratio of earnings available to cover fixed charges of at least 120% of the fixed charges for the rolling four quarters, tested at the end of each fiscal quarter. Additionally the Company must also maintain an interest coverage ratio of at least 2.1 at the end of each fiscal quarter. As of December 31, 2009, the Company is in compliance with all debt covenants, except the requirement to maintain a ratio of earnings to fixed charges of 1.2 to 1 which the Company did not meet as of December 31, 2009. The Company has obtained a waiver of the breach of such covenant from Sovereign Bank/Santander, which waiver covers the breach that otherwise would have occurred in connection with the covenant testing for the quarter ended December 31, 2009. The waiver does not apply to any future covenant testing dates. The Company expects to be in compliance with this covenant as of the next testing period (which will occur in connection with the end of the Company’s fiscal year ending March 31, 2010). In the event of default (which default may occur in connection with a non-waived breach), the lending bank may choose to accelerate payment of any amounts outstanding under the Term Note and, under certain circumstances, the bank may be entitled to cancel the facility. If the Company were unable to obtain a waiver for a breach of covenant and the bank accelerated the payment of any outstanding amounts, such acceleration may cause the Company’s cash position to deteriorate or, if cash on hand were insufficient to satisfy any payment due, may require the Company to obtain alternate financing to satisfy any accelerated payment obligation.

We also had a $3.0 million capital expenditure facility which was available until November 30, 2009. The capital expenditure facility was not renewed upon its expiration on November 30, 2010 as the Company intends to finance future equipment purchases on a specific item basis.

We paid interest only on borrowings under the capital expenditures line until November 30, 2009, at which time the principal balance is amortized over five years, commencing December 31, 2009. The interest on borrowings under the capital expenditure line is equal to the prime rate plus 0.5% through and including November 30, 2009 and thereafter at LIBOR, plus 3%. Any unpaid balance on the capital expenditures facility is to be paid on November 30, 2014. As of December 31, 2009, there were no amounts outstanding under the revolving line and $888,653 outstanding under the capital expenditure line. The balance outstanding under the capital expenditure line were used to finance the purchase of equipment that has been installed and placed in service during the second quarter ended September 30, 2009.

The securities purchase agreement pursuant to which we sold the Series A Convertible Preferred Stock and warrants to Barron Partners provides Barron Partners with a right of first refusal on future equity financings, which may affect our ability to raise funds from other sources if the need arises.

We believe that the $2.0 million revolving credit facility, which remained unused as of December 31, 2009 and terminates in June 2010, our capacity to access equipment specific financing and our cash flow from operations should be sufficient to enable us to satisfy our cash requirements at least through the end of fiscal 2011. Nevertheless, it is possible that we may require additional funds to the extent that we upgrade or expand our manufacturing facilities.

In the event that we make an acquisition, we may require additional financing for the acquisition. However, we do not have any current plans for any acquisition, and we cannot give any assurance that we will complete any acquisition. We have no commitment from any party for additional funds; however, the terms of our agreement with Barron Partners, particularly Barron Partners’ right of first refusal, may impair our ability to raise capital in the equity markets to the extent that potential investors would be reluctant to negotiate a financing when another party has a right to match the terms of the financing.

Controls and procedures

As filed, 2,063 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Evaluation of Disclosure Controls and Procedures

As of December 31, 2009, we carried out an evaluation, under the supervision and with the participation of management, including our interim chief executive officer and chief financial officer, of the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rule 13a-15(e) under the Securities Exchange Act of 1934 (the “Exchange Act”)).

Disclosure controls and procedures are designed to ensure that information required to be disclosed is recorded, processed, summarized and reported, within the time periods specified in SEC rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed is accumulated an communicated to the issuer’s management, including its principal executive and principal financial officers, or persons performing similar functions, as appropriate to allow timely decisions regarding required disclosure

Based upon that evaluation, our interim chief executive officer and chief financial officer concluded that our disclosure controls and procedures were effective as of December 31, 2009, to provide reasonable assurance that information required to be disclosed by the Company in reports filed or submitted under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms and is accumulated and communicated to management, including our interim chief executive officer and chief financial officer, as appropriate to allow timely decisions regarding required disclosure.

Changes in Internal Controls

There was no change in our internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) of the Securities Exchange Act of 1934) that occurred during the quarter ended December 31, 2009 that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

Source: SEC EDGAR, the filing index for accession 0001213900-10-000576. Last ingested by Listed: Nov 10, 2026, 04:27 ET. Listed shows no prices and gives no investment advice.