Listed

First Solar, Inc.: Form 10-K for the period ended Dec 31, 2024

Filed with the SEC on Feb 25, 2025 and accepted by EDGAR at Feb 25, 2025, 16:11 ET.

Share

Business

As filed, 61,417 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Company Overview

We are America’s leading photovoltaic (“PV”) solar technology and manufacturing company. The only U.S.-headquartered company among the world’s largest solar manufacturers, First Solar is focused on competitively and reliably enabling power generation needs with our advanced, thin film PV technology. Developed at research and development (“R&D”) labs in California and Ohio, the Company’s technology represents the next generation of solar power generation, providing a competitive, high-performance, and responsibly produced alternative to conventional crystalline silicon PV solar modules. Our PV solar modules are produced using a fully integrated, continuous process that does not rely on Chinese crystalline silicon supply chains.

We are the world’s largest thin film PV solar module manufacturer and the largest PV solar module manufacturer in the Western Hemisphere. In addressing the overall global demand for electricity, PV solar modules provide energy at a lower levelized cost of electricity (“LCOE”), meaning the net present value of a system’s total life cycle costs divided by the quantity of energy that is expected to be produced over the system’s life, when compared to traditional forms of energy generation. With approximately $2 billion in cumulative R&D investments in the last 20 years, we have a demonstrated history of innovation and continuous improvement. We believe our strategies and points of differentiation provide the foundation for our competitive position and enable us to remain one of the preferred providers of PV solar modules.

Business Strategy

Advanced Module Technology

Our current module semiconductor structure is a single-junction polycrystalline thin film that uses Cadmium Telluride (“CdTe”) as the absorption layer. CdTe has absorption properties that are well matched to the solar spectrum and can deliver competitive wattage using approximately 2% to 3% of the amount of semiconductor material used to manufacture conventional crystalline silicon modules. In terms of performance, in many climates our solar modules provide certain energy production advantages relative to competing crystalline silicon modules. For example, our CdTe solar technology provides:

  • a superior temperature coefficient, which results in stronger system performance in typical high insolation climates as the majority of a system’s generation, on average, occurs when module temperatures are well above 25°C (standard test conditions);
  • a superior spectral response in humid environments where atmospheric moisture alters the solar spectrum relative to standard test conditions;
  • a better partial shading response than competing crystalline silicon technologies, which may experience significantly lower energy generation than CdTe solar technologies when partial shading occurs; and
  • an immunity to cell cracking and its resulting power output loss, a common failure often observed in crystalline silicon modules caused by poor manufacturing, handling, weather, or other conditions.

In addition to these technological advantages, we also warrant that our solar modules will produce at least 98% of their labeled power output rating during the first year, with the warranty coverage reducing by a degradation factor that is generally between 0.3% and 0.5%, depending on the module series, every year thereafter throughout the limited power output warranty period of up to 30 years. As a result of these and other factors, our solar modules can produce more annual energy in real-world operating conditions than conventional crystalline silicon modules with the same nameplate capacity.

Manufacturing Process and Distributed Manufacturing Presence

Our modules combine our leading-edge CdTe technology with the manufacturing excellence and quality control that comes from being the world’s most experienced producer of thin film PV solar modules. With more than 75 GW of modules sold worldwide, we have a demonstrated history of manufacturing success and innovation. Our global manufacturing footprint includes facilities in the United States, Malaysia, Vietnam, and India. During 2023, we commenced production of our Series 7TM (“Series 7”) modules at our third manufacturing facility in Ohio and our first manufacturing facility in India, which combine our thin film CdTe technology with a larger form factor and an innovative steel back rail mounting structure that reduces module installation time. During 2024, we commenced production of Series 7 modules at our first manufacturing facility in Alabama, bringing our total installed nameplate production capacity across all our facilities to approximately 21 GW. Additionally, we are in the process of expanding our manufacturing capacity by approximately 4 GW, including the construction of our fifth U.S. manufacturing facility, which is expected to commence operations in the second half of 2025.

Our modules are manufactured in a high-throughput, automated environment that integrates all manufacturing steps into a continuous flow process. This process eliminates the multiple supply chain operators and resource-intensive batch processing steps that are used to produce crystalline silicon modules, which typically occur over several days and across multiple factories. At the outset of our module production, a sheet of glass enters the production line and in a matter of hours is transformed into a completed module ready for shipment.

This proprietary production process includes the following three stages: (i) the deposition stage, (ii) the cell definition and treatment stage, and (iii) the assembly and test stage. In the deposition stage, panels of transparent oxide-coated glass are robotically loaded onto the production line where they are cleaned, laser-mark identified with a serial number, heated, and coated with thin layers of semiconductor material, including CdTe, using our vapor transport deposition technology, after which the semiconductor-coated plates are cooled rapidly to increase glass strength. In the cell definition and treatment stage, we use high-speed lasers to transform the large continuous semiconductor coating on the glass plate into a series of interconnected cells that deliver the desired current and voltage output. In this stage, we also treat the semiconductor film using certain chemistries and processes to improve the device’s performance and apply a back contact. In the assembly and test stage, we apply busbars, inter-layer material, and a rear glass cover sheet that is laminated to encapsulate the device. We then apply anti-reflective coating material to the substrate glass to further improve the module’s performance by increasing its ability to absorb sunlight. Finally, junction boxes, termination wires, and a frame are applied to complete the module assembly.

We maintain a robust quality and reliability assurance program that monitors critical process parameters and measures product performance to ensure that industry and more stringent internal standards are met. We also conduct acceptance testing for electrical leakage, visual quality, and power measurement on a solar simulator prior to preparing a module for shipment. Our quality and reliability tests complement production surveillance with an ongoing monitoring program, subjecting production modules to accelerated life stress testing to help ensure ongoing conformance to requirements of the International Electrotechnical Commission and Underwriters Laboratories Inc. These programs and tests help assure delivery of power and performance in the field with a high level of product quality and reliability.

Research and Development

Our R&D model differentiates us from much of our competition due to its vertical integration, from advanced research to product development, manufacturing, and applications. We continue to devote substantial resources to our R&D efforts, which generally focus on continually improving the wattage and energy yield of our solar modules. We also have R&D programs to improve module durability and manufacturing efficiencies, including throughput, volume ramp, and material cost reduction. We continue to invest significant financial resources in such initiatives, including the construction of a dedicated perovskite development line and a dedicated R&D innovation center in Ohio, which was formally commissioned during 2024. This R&D innovation center, which features a high- volume manufacturing scale production pilot line, is expected to enable the production of full-sized prototypes of thin film and tandem PV modules, supporting the implementation of our technology roadmap. Based on publicly available information, we are one of the leaders in R&D investment among PV solar module manufacturers.

In the course of our R&D activities, we explore various technologies in our efforts to sustain competitive differentiation in our modules. We primarily conduct our R&D activities and qualify process and product improvements for full production at our Perrysburg, Ohio facilities and systematically deploy them to our other facilities. We believe our systematic approach to technology change management enables continuous improvements and ensures uniform adoption across our production lines. In addition, our production lines are replicas or near replicas of each other and, as a result, a process or production improvement on one line can be rapidly and reliably replicated across other production lines.

We regularly produce research cells in our laboratories, some of which are tested for performance and certified by independent labs, such as the National Renewable Energy Laboratory. Cell efficiency measures the proportion of light converted to electricity in a single solar cell under standard test conditions. Our research cells are produced using laboratory equipment and methods and are not intended to be representative of our manufacturing capability. We currently hold two world records for CdTe PV cell efficiency, achieving an independently certified research cell efficiency of 23.1% and a module aperture area efficiency of 19.9%. We continue to evaluate opportunities to develop and leverage other solar cell technologies in multi-junction applications consisting of CdTe, or other materials, including thin film technologies. For example, during 2023, we acquired Evolar AB (“Evolar”), a European developer of perovskite technology. This acquisition is expected to accelerate the development of high efficiency multi-junction devices by integrating Evolar’s expertise with First Solar’s existing R&D capabilities. We believe such multi-junction applications have the potential to significantly increase the efficiency of PV modules beyond the limits of traditional single-junction devices.

Responsible Solar

We are committed to enhancing the social and economic benefits of our products and reducing our carbon footprint. Our thin film modules are manufactured through an integrated process that uses less energy, water, and semiconductor material than conventional crystalline silicon modules. Our thin film module technology has the fastest energy payback time, smallest carbon footprint, and lowest water use of any commercially available PV solar technology, measured on a lifecycle basis that accounts for the energy, raw materials, water usage, and transportation across the supply chain, manufacturing process, and end-of-life module recycling.

Our Series 7 module is our most eco-efficient product to date, with a carbon and water footprint that is approximately four times lower than conventional crystalline silicon modules manufactured in China and an energy payback time that is approximately five times faster. In just two months under high irradiation conditions, our Series 7 modules produce more energy than was required to create them. This corresponds to a 180-fold energy return on investment over a 30-year project lifetime, providing an abundant net energy gain to the electricity grid.

First Solar modules are designed for high-value recycling to maximize material recovery and contribute to a circular economy. Our recycling process recovers more than 90% of module materials for reuse, providing high quality secondary resources for new solar modules and other glass, rubber, and aluminum products. First Solar has a unique and long-standing leadership position in PV recycling, having established the industry’s first global recycling program in 2005 and recycled approximately 400,000 metric tons of PV modules to date.

Financial Stability

In addition to our responsible solar commitments, we are also committed to creating long-term shareholder value through a decision-making framework that delivers a balance of growth, profitability, and liquidity. This framework has enabled us to fund our module manufacturing and capacity expansion initiatives primarily using cash flows generated by our operations and by maintaining appropriate debt levels based on cash flow expectations. Our financial stability provides strategic optionality as we evaluate how to invest in our business and generate returns for our shareholders. Our financial stability also enables us to offer meaningful warranties, which provide us with a competitive advantage relative to many of our peers in the solar industry. Furthermore, we expect our financial discipline and ability to manage operating costs to enhance our profitability as we continue to scale our business.

Market Overview

Solar energy is one of the fastest growing forms of renewable energy with numerous benefits, including economic and speed of deployment, that make it an attractive complement to or substitute for traditional forms of energy generation. In recent years, the cost of producing electricity from PV solar power systems has decreased to levels that are competitive with or below the wholesale price of electricity in many markets. Other technological developments in the renewable energy industry, such as the advancement of energy storage capabilities, have further enhanced the prospects of solar energy as an alternative to traditional forms of energy generation. As a result of these and other factors, worldwide solar markets continue to develop and expand.

Government incentive programs, such as the Inflation Reduction Act of 2022 (the “IRA”), have contributed to this momentum by providing solar module manufacturers, project developers, and project owners with various incentives to accelerate the deployment of solar power generation. Among other things, the IRA (i) reinstates the 30% investment tax credit for qualifying solar projects that meet certain wage and apprenticeship requirements, (ii) extends the production tax credit (“PTC”) to include energy generated from solar projects, (iii) provides incremental investment and production tax credits for solar projects that meet certain domestic content and location requirements, and (iv) offers tax credits for solar modules and solar module components manufactured in the United States and sold to third parties. In light of such regulatory developments, we have recently commenced or completed certain manufacturing expansion activities in the United States and India and continue to evaluate opportunities for future expansion worldwide, as described below under “Global Markets.” For more information about certain risks associated with the IRA, see Item 1A. “Risk Factors – We have received and expect to continue to receive certain financial benefits as a result of tax incentives provided by the Inflation Reduction Act of 2022. If these financial benefits vary significantly from our assumptions, our business, financial condition, and results of operations could be adversely affected.”

Internationally, given the combination of (i) a European Union market captured by Chinese solar modules, which pricing is at levels near or below manufacturing costs, (ii) an India market effectively closed to Southeast Asian finished goods, (iii) the uncertain U.S. policy environment following the 2024 U.S. elections, and (iv) a supply and demand imbalance for Southeast Asian product, we have decided to reduce production output of our Series 6 modules at our manufacturing facilities in Malaysia and Vietnam by a combined total of 1 GW in 2025. Although module average selling prices in many global markets continue to decline, recent module pricing in the United States, our primary market, has been relatively stable due, in part, to the demand for domestically manufactured modules as a result of the IRA. In light of such market realities, we continue to advocate for industrial and trade policies that provide a level playing field for domestic manufacturers of solar cells and modules. We also continue to focus on our strategies and points of differentiation, which include our advanced module technology, our manufacturing process and distributed manufacturing presence, our R&D capabilities, our commitment to responsible solar, and our financial stability.

Global Markets

Energy markets are, by their nature, localized, with different factors impacting electricity generation and demand in a particular region or for a particular application. Further, overall electric load growth, especially as a result of artificial intelligence (“AI”)-driven data center demand, continues to increase. Accordingly, our business is evolving worldwide and is shaped by the varying ways in which our modules can provide compelling and economically viable solutions to energy needs in various markets. We are currently focusing on markets, including those listed below, in which our CdTe solar modules provide certain advantages over conventional crystalline silicon solar modules, including (i) high insolation climates in which our modules provide a superior temperature coefficient, (ii)

humid environments in which our modules provide a superior spectral response, (iii) markets that value responsible sourcing through transparent supply chain reporting and ethical business practices, and (iv) markets that promote renewable energy investments through supportive policy environments. To the extent our production capacity expands in future periods, and policy environments are supportive, we have the potential to extend our focus to additional geographic markets.

United States. Multiple markets within the United States, which accounted for 93% of our 2024 net sales, exemplify favorable characteristics for a solar market, including (i) sizeable and growing electricity needs, driven largely by data center demand; (ii) strong demand for renewable energy generation; (iii) abundant solar resources; and (iv) demand for domestically manufactured modules. In those areas and applications in which these factors are more pronounced, our PV solar modules compete favorably on an economic basis with traditional forms of energy generation. The market penetration of PV solar is also impacted by certain federal and state incentive programs described below under “Incentive Programs.” The U.S. currently has an installed solar generation capacity of approximately 220 GW, and, in 2024 alone, the U.S. installed an estimated 32 GW of utility-scale solar capacity. Following the 2024 U.S. elections, the new U.S. Presidential administration has committed to an economic mandate focused on growth, reducing inflation, reshoring manufacturing and jobs, and championing innovation, including AI. The U.S. is expected to need approximately 128 GW of new power generation capacity by 2029 to meet high summer peak demand, the majority of which is expected to be driven by data center growth. As a result of such market opportunities, we are in the process of expanding our U.S. manufacturing capacity, including the construction of our fifth U.S. manufacturing facility, which is expected to commence operations in the second half of 2025.

India. India continues to represent one of the largest and fastest growing markets for PV solar energy with an installed solar generation capacity of approximately 98 GW. In addition, the government has established aggressive renewable energy targets, which include increasing the country’s overall renewable energy capacity to 500 GW by 2030, becoming energy independent by 2047, and establishing a net-zero carbon emissions target by 2070. Based on these targets, it is projected that the installed solar energy generation capacity will be approximately 280 GW by 2030. The government has also announced a series of policy and regulatory measures to incentivize domestic manufacturing of PV solar modules, as described below under “Incentive Programs.” These targets, policies, and regulatory measures are expected to help create significant and sustained demand for PV solar energy. In addition to these factors, our CdTe solar technology is well suited for the India market given its hot and humid climate conditions. As a result of such market opportunities and renewable targets, we recently expanded production of Series 7 modules at our first manufacturing facility in India, bringing our total installed nameplate production capacity in the country to 3.2 GW.

Incentive Programs

Although we compete in markets that do not require solar-specific government incentive programs, our net sales and profits remain subject to variability based on the scope of tax and production incentives, renewable portfolio standards, tendering systems, and other support programs intended to stimulate economies, achieve decarbonization initiatives, and/or establish greater energy independence. Such programs continue to influence the demand for PV solar energy around the world.

United States. In the United States, incentive programs exist at both the federal and state levels and may take the form of investment and production tax credits, sales and property tax exemptions and abatements, and/or renewable energy targets. However, the potential policies of the new U.S. presidential administration and Congress have raised some uncertainty as to such incentive programs. For more information about certain risks associated with such incentives, see Item 1A. “Risk Factors – We have received and expect to continue to receive certain financial benefits as a result of tax incentives provided by the Inflation Reduction Act of 2022. If these financial benefits vary significantly from our assumptions, our business, financial condition, and results of operations could be adversely affected.” and “Risk Factors – Existing regulations and policies, changes thereto, and new regulations and policies may present technical, regulatory, and economic barriers to the purchase and use of PV solar products, which may significantly reduce demand for our modules.” For more information about pending and ongoing developments related to the IRA, see Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations – Certain Trends and Uncertainties.” Government incentives include the following:

  • Advanced Manufacturing Production Credit. In August 2022, the previous U.S. President signed the IRA into law, which was intended to accelerate the country’s ongoing energy transition. The provisions of the IRA are generally effective for tax years beginning after 2022. As discussed above, the IRA offers various tax credits, including the advanced manufacturing production credit, pursuant to Section 45X of the Internal Revenue Code (the “IRC”), for solar modules and certain solar module components manufactured in the United States and sold to third parties. Such credit may be refundable by the Internal Revenue Service (“IRS”) or transferable to a third party and is available from 2023 through 2032, subject to phase down beginning in 2030. For eligible components, the credit is equal to (i) $12 per square meter for a PV wafer, (ii) 4 cents multiplied by the capacity of a PV cell in watts, and (iii) 7 cents multiplied by the capacity of a PV module in watts. Such financial incentives are expected to increase both the demand for, and the domestic manufacturing of, solar modules and solar module components in the United States. For more information about certain risks associated with the benefits available to us under the IRA, see Item 1A. “Risk Factors – We have received and expect to continue to receive certain financial benefits as a result of tax incentives provided by the Inflation Reduction Act of 2022. If these financial benefits vary significantly from our assumptions, our business, financial condition, and results of operations could be adversely affected.” For more information about pending and ongoing developments related to the IRA, see Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations – Certain Trends and Uncertainties.”
  • Investment and Production Tax Credits. At the federal level, investment and production tax credits for business and residential solar systems have gone through cycles of enactment and expiration over several decades. The current federal energy investment tax credit (“ITC”) for solar energy property requires projects to meet certain wage and apprenticeship requirements and to have commenced construction by a certain date, which may be achieved by certain qualifying procurement activities. In 2022, the U.S. Congress reinstated the 30% ITC as part of the IRA discussed above. Similarly, the IRA extended the renewable electricity PTC, which provides a tax credit for electricity generated by solar and other qualifying technologies for the first 10 years of a system’s operations. Both the ITC and PTC are available until a four-year phase down is triggered, which occurs at the later of 2032 or the year in which power-sector emissions are 25% of 2022 levels. The ITC and PTC have been important economic drivers of solar installations and qualifying procurement activities in the United States. The positive impact of the ITC and PTC depends, in large part, on the availability of tax equity for project financing or the ability to transfer such credits to other taxpayers.
  • R&D Grants. The U.S. Department of Energy, though its Solar Energy Technologies Office (“SETO”), funds various solar energy R&D projects, including PV, system integration, and manufacturing initiatives, among others. In September 2023, SETO announced the Advancing U.S. Thin-Film Solar Photovoltaics Funding Opportunity, which provides incentives for qualifying solar R&D projects related to CdTe development and the manufacturing of perovskite tandem PV products. In May 2024, SETO announced the award recipients for this funding opportunity, which included First Solar. These grants are intended to accelerate and expand domestic solar R&D to strengthen U.S. solar manufacturing and contribute to renewable energy targets.

India. In India, incentives at both the federal and state levels have contributed to growth in domestic PV solar module manufacturing and solar energy installations. Such incentives include the following:

  • Production Linked Incentive. In March 2023, the government of India allocated financial incentives under the Production Linked Incentive (“PLI”) scheme to certain PV module manufacturers, including First Solar. The PLI scheme is expected to provide aggregate funding of INR 185 billion ($2.2 billion), which is

intended to promote the manufacturing of high efficiency solar modules in India and to reduce India’s dependency on foreign imports of solar modules. For more information about pending and ongoing developments related to the PLI, see Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations – Certain Trends and Uncertainties.”

Various proposed and contemplated environmental and tax policies may create regulatory uncertainty in the renewable energy sector, including the solar energy sector, and may lead to a reduction or removal of various clean energy programs and initiatives designed to curtail climate change. For more information about the risks associated with these potential government actions, see Item 1A. “Risk Factors – The modification, reduction, elimination, or expiration of government subsidies, economic incentives, tax incentives, renewable energy targets, and other support for on-grid solar electricity applications, or the impact of other public policies, such as tariffs or other trade remedies imposed on solar cells and modules or related raw materials or equipment, could negatively impact demand and/or price levels for our solar modules and limit our growth or lead to a reduction in our net sales or increase our costs, thereby adversely impacting our operating results.”

Modules Business

Our primary segment is our modules business, which involves the design, manufacture, and sale of CdTe solar modules, which convert sunlight into electricity. Since the inception of First Solar, our modules have used our advanced thin film semiconductor technology. Our Series 6 Plus module is a glass laminate approximately 4ft x 6ft in size that encapsulates thin film PV semiconductor materials. Our Series 7 module has a larger form factor of approximately 4ft x 7ft in size. At the end of 2024, our Series 6 Plus and Series 7 modules had an average power output of 459 watts and 531 watts, respectively.

Raw Materials

Our module manufacturing process uses approximately 30 types of raw materials and components to construct a solar module, including CdTe, front glass coated with transparent conductive oxide, other semiconductor materials, organics such as adhesives, heat-strengthened back glass, frames, packaging components such as interlayer, cord plate/cord plate cap, lead wire, and solar connectors. Before we use these materials and components in our manufacturing process, a supplier must undergo rigorous qualification procedures, and we continually evaluate new suppliers as part of our cost reduction roadmap and expansion activities. When possible, we attempt to use suppliers that can provide a raw material supply source that is near our manufacturing locations, reducing the cost and lead times for such materials. For more information about the risks associated with our supply chain, see Item 1A. “Risk Factors – Several of our key raw materials and components are either single-sourced or sourced from a limited number of suppliers, and their failure to perform could cause manufacturing delays and impair our ability to deliver solar modules to customers in the required quality and quantities and at a price that is profitable to us.”

Customers

Our customers include system developers, independent power producers, utilities, commercial and industrial companies, and other system owners and operators. During 2024, our third-party module sales represented approximately 100% of our total net sales, and we sold the majority of our solar modules to customers with projects in the United States. During 2024, no customer accounted for more than 10% of our modules business net sales. For more information about risks related to our customers, see Item 1A. “Risk Factors – The loss of any of our large customers, or the inability of our customers and counterparties to perform under their contracts with us, could significantly reduce our net sales and negatively impact our results of operations.”

We continue to focus on certain key geographic markets, particularly in areas with abundant solar resources and sizable electricity demand, and additional customer relationships to diversify our customer base. The wholesale commercial and industrial market continues to represent a promising opportunity for the widespread adoption of PV solar technology as corporations undertake certain sustainability commitments. The demand for corporate renewables continues to accelerate, with corporations worldwide committing to the RE100 campaign. We believe we also have a competitive advantage in the commercial and industrial market due to many customers’ sensitivity to the sustainability, experience, and financial stability of their suppliers and geographically diverse operating locations. With our financial strength, global footprint, and commitment to responsible solar, we are well positioned to meet these needs.

Additionally, the increase of utility-owned generation and overall electric load growth, especially as a result of AI-driven data center demand, have expanded the number of potential buyers of our modules as such utility and data center customers benefit from a potentially low cost of capital available through rate-based utility investments. Given their long-term ownership profiles, these customers typically seek to partner with stable companies that can provide low-cost alternatives to, or replacements for, aging fossil fuel-based generation resources, including reliable PV solar technology, thereby mitigating their long-term ownership risks.

Competition

The solar energy and renewable energy sectors are highly competitive and continually evolving as participants in these sectors strive to distinguish themselves within their markets and compete within the larger electric power industry. Among PV solar module manufacturers, the principal method of competition is sales price per watt, which may be influenced by several module value attributes, including wattage (through a larger form factor or an improved conversion efficiency), energy yield, degradation, sustainability, and reliability. Sales price per watt may also be influenced by warranty terms, customer payment terms, and/or module content attributes. We face intense competition for sales of solar modules, which may result in reduced selling prices and loss of market share. Our primary source of competition is crystalline silicon module manufacturers, the majority of which are linked to China. Allegations of forced labor in the Chinese solar supply chain have emerged in recent years, which means we also compete on our approach to responsible sourcing and supply chain due diligence. Our differentiated technology, integrated manufacturing process, and tightly controlled supply chain help limit the risks associated with outsourcing and the multiple supply tiers of conventional crystalline silicon module manufacturing.

We also expect to compete with future entrants into the PV solar industry and existing market participants that offer new or differentiated technological solutions. For additional information, see Item 1A. “Risk Factors – Our failure to further refine our technology and develop and introduce improved PV products, including as a result of delays in implementing planned advancements, could render our solar modules uncompetitive and reduce our net sales, profitability, and/or market share.”

Certain of our existing or future competitors, including many linked to China, may have direct or indirect access to sovereign capital or other forms of state support, which could enable such competitors to compromise intellectual property and operate at minimal or negative operating margins for sustained periods of time. Our results of operations could be adversely affected if competitors reduce module pricing to levels below their costs, bid aggressively low prices for module sale agreements, or are able to operate at minimal or negative operating margins for sustained periods of time. We believe the solar industry may experience periods of structural imbalance between supply and demand, which could lead to periods of low pricing and demand volatility. For additional information, see Item 1A. “Risk Factors – Competition in solar markets globally and across the solar value chain is intense and could remain that way for an extended period of time. The solar industry may experience periods of structural imbalance between global PV module supply and demand that result in periods of pricing volatility, which could have a material adverse effect on our business, financial condition, and results of operations.”

Limited Solar Module Warranties

We provide a limited PV solar module warranty covering defects in materials and workmanship under normal use and service conditions for up to 12.5 years. We also typically warrant that modules installed in accordance with agreed-upon specifications will produce at least 98% of their labeled power output rating during the first year, with the warranty coverage reducing by a degradation factor every year thereafter throughout the limited power output warranty period of up to 30 years. Among other things, our solar module warranty also covers the resulting power output loss from cell cracking. For additional information on our solar module warranty programs, refer to Item 1A. “Risk Factors – Problems with product quality or performance may cause us to incur significant and/or unexpected contractual damages and/or warranty and related expenses, damage our market reputation, and prevent us from maintaining or increasing our market share.”

Solar Module Collection and Recycling

We are committed to mitigating the environmental impact of our products over their entire life cycle. As part of such efforts, we offer recycling services to help module owners meet their end-of-life (“EOL”) obligations. In 2005, we voluntarily established the industry’s first global and comprehensive module collection and recycling program, and in 2013 we implemented a “pay-as-you-go” recycling service. We continue to invest in module recycling technology improvements to increase recycling efficiency and reduce recycling prices for our customers. Our module recycling process is designed to maximize the recovery of materials, including the glass and encapsulated semiconductor material, for use in new modules or other products and enhances the sustainability profile of our modules. Approximately 90% of each collected First Solar module can be recycled into materials for reuse. We currently operate recycling facilities at our manufacturing sites in the United States, India, Malaysia, and Vietnam and at our former manufacturing facility in Germany.

For certain legacy customer sales contracts that were covered under the 2005 module collection and recycling program, which has since been discontinued, we agreed to pay the costs for the collection and recycling of qualifying solar modules, and the end users agreed to notify us, disassemble their solar power systems, package the solar modules for shipment, and revert ownership rights over the modules back to us at the end of the modules’ service lives.

For modules covered under our program that were previously sold into and installed in the EU, we continue to maintain a commitment to cover the estimated collection and recycling costs consistent with our historical program. The EU’s Waste Electrical and Electronic Equipment (“WEEE”) Directive places the obligation of recycling (including collection, treatment, and environmentally sound disposal) of electrical and electronic equipment products upon producers and is applicable to all PV solar modules in EU member states. As a result of the transposition of the WEEE Directive by the EU member states, we have adjusted our recycling offerings, as required, to ensure compliance with specific EU member state WEEE regulations.

Intellectual Property

Our success depends, in part, on our ability to maintain and protect our proprietary technology and to conduct our business without infringing on the proprietary rights of others. We rely primarily on a combination of patents, trademarks, and trade secrets, as well as associate and third-party confidentiality agreements, to safeguard our intellectual property. We regularly file patent applications to protect inventions arising from our R&D activities in the United States and other countries. Our patent applications and any future patent applications may not result in a patent being issued with the scope of the claims we seek, or at all, and any patents we may receive may be challenged, invalidated, or declared unenforceable. In addition, we have registered and/or have applied to register trademarks and service marks in the United States and a number of foreign countries for “First Solar.”

With respect to proprietary know-how that is not patentable and processes for which patents are difficult to enforce, we rely on, among other things, trade secret protection and confidentiality agreements to safeguard our interests. We believe that many elements of our PV solar module manufacturing processes, including our unique materials sourcing, involve proprietary know-how, technology, or data that are not covered by patents or patent applications, including technical processes, equipment designs, algorithms, and procedures. We have taken security measures to protect these elements. Our R&D personnel have entered into confidentiality and proprietary information agreements with us. These agreements address intellectual property protection issues and require our associates, to the extent permitted by law, to assign to us all of the inventions, designs, and technologies they develop during the course of their employment with us that are directed towards our actual or anticipated business.

Regulatory, Environmental, Health, and Safety Matters

We are subject to various federal, state, local, and international laws and regulations, and are often subject to oversight and regulation in accordance with national and local ordinances relating to building codes, safety, and other matters. The impact of these laws and requirements may increase our overall costs and may delay, prevent, or increase the cost of manufacturing PV modules. As we operate in the U.S. and internationally, we are also subject to the application of U.S. trade laws and trade laws of other countries. Such trade laws and policies, or any other U.S. or global trade remedies or other trade barriers that apply to us given our global operations, may directly or indirectly affect our business, financial condition, and results of operations. See Item 1A. “Risk Factors – Existing regulations and policies, changes thereto, and new regulations and policies may present technical, regulatory, and economic barriers to the purchase and use of PV solar products, which may significantly reduce demand for our modules.”

We are also subject to the application of various anti-bribery laws, some of which prohibit improper payments to government and non-government persons and entities, and others (e.g., the U.S. Foreign Corrupt Practices Act (the “FCPA”) and the U.K. Bribery Act) that extend their application to activities outside their country of origin. We may compete for contracts in and/or source materials from countries that require substantial government contact and where norms can differ from U.S. standards, and not all competitors are subject to compliance with the same anti-bribery laws. See Item 1A. Risk Factors – “We could be adversely affected by any violations of the FCPA, the U.K. Bribery Act, and other foreign anti-bribery laws.”

We are also subject to various federal, state, local, and international laws and regulations relating to the protection of the environment, including those governing the discharge of pollutants into the air and water; the use, management, and disposal of hazardous materials and wastes; occupational health and safety; and the cleanup of contaminated sites. Our operations include the use, handling, storage, transportation, generation, and disposal of hazardous materials and wastes. Therefore, we could incur substantial costs, including cleanup costs, fines, and civil or criminal sanctions and costs arising from third-party property damage or personal injury claims as a result of violations of, or liabilities under, environmental and occupational health and safety laws and regulations or non-compliance with environmental permits required for our operations. We believe we are currently in substantial compliance with applicable environmental and occupational health and safety requirements and do not expect to incur material expenditures for environmental and occupational health and safety controls in the foreseeable future. However, future developments such as the implementation of new, more stringent laws and regulations, more aggressive enforcement policies, or the discovery of unknown environmental conditions may require expenditures that could have a material adverse effect on our business, financial condition, or results of operations. See Item 1A. “Risk Factors – Environmental obligations and liabilities could have a substantial negative impact on our business, financial condition, and results of operations.”

From time to time, we may also be subject to government policies or laws intended to protect human rights. For example, in late 2021 the previous U.S. President signed the Uyghur Forced Labor Prevention Act, which bans the import of goods from China’s Xinjiang region into the United States due to concerns about forced labor practices in the region, which provides more than a third of the world’s polysilicon supply. While we do not use polysilicon in our solar modules, which mitigates the potential supply chain disruptions and human rights risks associated with such import ban, the implementation of similar restrictions or trade embargoes on the purchase of certain materials or equipment necessary to sustain our manufacturing operations may require expenditures and process changes to ensure our supply chain remains free of such materials, which could have a material adverse effect on our business, financial condition, or results of operations. We are committed to protecting human rights, enforcing fair labor practices, and addressing the potential risks of forced labor across our own operations and the operations of our suppliers.

Human Capital

As of December 31, 2024, we had approximately 8,100 associates (our term for full and part-time employees), the majority of which work in the United States, Malaysia, Vietnam, and India.

Our success depends, to a significant extent, on our ability to attract, train, and retain management, operations, sales, and technical talent, including associates in foreign jurisdictions. We strive to attract and retain qualified individuals globally to further our mission of providing cost-advantaged solar technology through rigorous safety practices, innovation, customer engagement, industry leadership, and operational excellence. We prohibit discrimination based on race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. As part of our global talent management process, we engage in succession planning by prioritizing the development and retention of associates in critical roles.

We follow a pay-for-performance model in which associates are compensated for achieving goals and associated metrics and demonstrating First Solar values. We review associate compensation on a regular basis to ensure internal and external equity, including, among other things, minimum wage and living wage assessments across our global operations. We offer competitive compensation and benefits to our associates, including, for example, health care and other insurance benefits, retirement programs, paid time off, paid parental leave, flexible work schedules, and education assistance, depending on eligibility.

We are committed to developing and providing career growth opportunities for our associates. We believe a strong values-based and inclusive culture is essential to the success of our company. We gather and respond to associate feedback in a variety of ways, including through anonymous, periodic associate engagement surveys, pulse surveys, town halls, and one-on-one interactions. Additionally, we have integrated career advancement, mentorship, and leadership programs to ensure the professional growth and development of our talent worldwide.

Other than our associates in Vietnam and Sweden, none of our associates are currently represented by labor unions or covered by a collective bargaining agreement. Our associates in Vietnam are represented by the Vietnam General Confederation of Labor. Our associates in Sweden are represented by the Engineers of Sweden. As we continue to expand domestically and internationally, we may encounter regional laws that mandate union representation or associates who desire union representation or a collective bargaining agreement. We recognize that in the locations where we operate, employees have the right to freely associate or not associate with third-party labor organizations, along with the right to bargain or not to bargain collectively in accordance with local laws.

Available Information

We maintain a website at www.firstsolar.com (http://www.firstsolar.com). We make available free of charge on our website our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, proxy statements, and any amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act, as soon as reasonably practicable after we electronically file such materials with, or furnish them to, the SEC. The information contained in or connected to our website is not incorporated by reference into this report. We use our website as one means of disclosing material non-public information and for complying with our disclosure obligations under the SEC’s Regulation FD. Such disclosures are typically included within the Investor Relations section of our website at investor.firstsolar.com. Accordingly, investors should monitor such portions of our website in addition to following our press releases, SEC filings, and public conference calls and webcasts. The SEC also maintains a website at www.sec.gov (http://www.sec.gov) that contains reports and other information regarding issuers, such as First Solar, that file electronically with the SEC.

Information about Our Executive Officers

Our executive officers and their ages and positions as of February 25, 2025 were as follows:

Name Age Position
Mark R. Widmar 59 Chief Executive Officer
Alexander R. Bradley 43 Chief Financial Officer
Georges Antoun 62 Chief Commercial Officer
Michael Koralewski 53 Chief Supply Chain Officer
Kuntal Kumar Verma 52 Chief Manufacturing Officer
Patrick Buehler 47 Chief Product Officer
Markus Gloeckler 51 Chief Technology Officer
Caroline Stockdale 61 Chief People and Communications Officer
Jason Dymbort 47 General Counsel and Secretary

Mark R. Widmar was appointed Chief Executive Officer in July 2016. He joined First Solar in April 2011 as Chief Financial Officer and also served as First Solar’s Chief Accounting Officer from February 2012 through June 2015. From March 2015 to June 2016, Mr. Widmar served as the Chief Financial Officer and through June 2018, served as a director on the board of the general partner of 8point3 Energy Partners LP (“8point3”), the joint yieldco formed by First Solar and SunPower Corporation in 2015 to own and operate a portfolio of selected solar generation assets. Prior to joining First Solar, Mr. Widmar served as Chief Financial Officer of GrafTech International Ltd., a leading global manufacturer of advanced carbon and graphite materials, from May 2006 through March 2011. Prior to joining GrafTech, Mr. Widmar served as Corporate Controller of NCR Inc. from 2005 to 2006, and was a Business Unit Chief Financial Officer for NCR from November 2002 to his appointment as Controller. He also served as a Division Controller at Dell, Inc. from August 2000 to November 2002. Mr. Widmar also held various financial and managerial positions with Lucent Technologies Inc., Allied Signal, Inc., and Bristol Myers/Squibb, Inc. He began his career in 1987 as an accountant with Ernst & Young. He holds a Bachelor of Science in business accounting and a Master of Business Administration from Indiana University.

Alexander R. Bradley was appointed Chief Financial Officer in October 2016. He joined First Solar in May 2008, and previously served as Vice President of both Treasury and Project Finance, leading or supporting the structuring, sale, and financing of over $10 billion and approximately 2.7 GW of the Company’s worldwide development assets, including several of the largest PV power plant projects in North America. From June 2016 to June 2018, Mr. Bradley also served as an officer and board member of the general partner of 8point3. Prior to joining First Solar, Mr. Bradley worked at HSBC in investment banking and leveraged finance, in London and New York, covering the energy and utilities sector. He received his Master of Arts from the University of Edinburgh, Scotland.

Georges Antoun was appointed Chief Commercial Officer in July 2016. He joined First Solar in July 2012 as Chief Operating Officer before being appointed as President, U.S. in July 2015. Mr. Antoun has over 30 years of operational and technical experience, including leadership positions at several global technology companies. Prior to joining First Solar, Mr. Antoun served as Venture Partner at Technology Crossover Ventures (“TCV”), a private equity and venture firm that he joined in July 2011. Before joining TCV, Mr. Antoun was the Head of Product Area IP & Broadband Networks for Ericsson, based in San Jose, California. Mr. Antoun joined Ericsson in 2007, when Ericsson acquired Redback Networks, a telecommunications equipment company, where Mr. Antoun served as the Senior Vice President of World Wide Sales & Operations. After the acquisition, Mr. Antoun was promoted to Chief Executive Officer of the Redback Networks subsidiary. Prior to Redback Networks, Mr. Antoun spent five years at Cisco Systems, where he served as Vice President of Worldwide Systems Engineering and Field Marketing, Vice President of Worldwide Optical Operations, and Vice President of Carrier Sales. Prior to Cisco Systems, he was the Director of Systems Engineering at Newbridge Networks, a data and voice networking company. Mr. Antoun started his career at Nynex (now Verizon Communications), where he was part of its Science and Technology Division. Mr. Antoun serves as a member of the board of directors of Marathon Digital Holdings. He is also the Chairman of the University of Louisiana’s College of Engineering Dean’s Advisory Council board. He earned a Bachelor of

Science degree in engineering from the University of Louisiana at Lafayette and a Master of Science in information systems engineering from NYU Poly.

Michael Koralewski was appointed Chief Supply Chain Officer in November 2022 and is accountable for maintaining executive oversight of First Solar’s strategic global supply chain. He previously served as First Solar’s Chief Manufacturing Operations Officer and provides over 25 years of global operational experience to the executive leadership team. Mr. Koralewski joined First Solar in 2006, serving in several senior roles in operations and quality management, including Senior Vice President, Global Manufacturing since 2015; Vice President, Global Site Operations and Plant Manager since 2011; and Vice President, Global Quality since 2009. In all of these roles Mr. Koralewski has been significantly involved since the beginning of First Solar’s manufacturing scaling and expansion from site selection through sustaining operations and supply chain development. Prior to joining First Solar, Mr. Koralewski worked at Dana Incorporated where he held several positions with global responsibility in operations and quality management. He earned a Bachelor of Science in chemical engineering from Case Western Reserve University and a Master of Business Administration from Bowling Green State University.

Kuntal Kumar Verma was appointed Chief Manufacturing Officer in November 2022 and previously served as First Solar’s Chief Manufacturing Engineering Officer. He is responsible for First Solar’s global manufacturing operations and engineering, including its performance and improvement roadmap, global technology scaling, new plant start-ups, and strategic initiatives. Mr. Verma joined First Solar in 2002, serving in progressively more senior roles in engineering and manufacturing, including Vice President, Global Manufacturing Engineering since 2012. Prior to joining First Solar, Mr. Verma held several engineering and operations positions at Reliance Industries Limited, India. He is a Master Black Belt in Six Sigma/Lean Manufacturing with an expert certification in Taguchi Methods (Robust Engineering) and a Certification in Production and Inventory Management from American Production and Inventory Control Society. He earned a Bachelor of Science in mechanical engineering from the National Institute of Technology in India, a Master of Science in industrial engineering from the University of Toledo, and a Master of Business Administration from Bowling Green State University.

Patrick Buehler was appointed Chief Product Officer in December 2022, having previously served as Chief Quality and Reliability Officer. Mr. Buehler has over 20 years of operational and technical experience. In his role, Mr. Buehler is responsible for all aspects of product lifecycle management, including understanding market demands, technology trends, and competition to facilitate implementation of new or enhanced products. Mr. Buehler maintains global leadership responsibility for quality and reliability, environmental, health, safety, and security, recycling technology process development and operations, customer service, program management, and strategic initiatives. Mr. Buehler joined First Solar in 2006, serving in progressively more senior technical and operations roles, including Vice President, Quality and Reliability since 2019. Prior to joining First Solar, Mr. Buehler held several roles in manufacturing, engineering, maintenance, and product development at DuPont de Nemours, Inc. and Cummins, Inc. He earned a Bachelor of Science in mechanical engineering from the University of Cincinnati and a Master of Science in mechanical engineering from Purdue University.

Markus Gloeckler was appointed Chief Technology Officer in November 2020 after being appointed Co-Chief Technology Officer in July 2020. He is focused on driving First Solar’s thin film PV module technology. Mr. Gloeckler has extensive experience guiding strategic research and development activities and served First Solar as Vice President and Chief Scientist before being promoted to Senior Vice President, Module Research and Development. He was instrumental in enabling First Solar’s achievement of various world records relating to conversion efficiency for CdTe solar cells. In his role as Vice President of Research, he led the thin film technology transfer from General Electric to First Solar following the intellectual property acquisition in 2013. He joined First Solar in 2005 in an engineering function supporting First Solar’s technology development after the initial launch of the Series 2 module. Mr. Gloeckler holds an undergraduate degree in microsystems engineering from the Regensburg University of Applied Sciences in Germany, and a Doctor of Philosophy in physics from Colorado State University.

Caroline Stockdale joined First Solar in October 2019 and serves as Chief People and Communications Officer. Prior to joining First Solar, she served as the Chief Executive Officer for First Perform, a provider of human resources services for a variety of customers, from Fortune 100 companies to start-ups. Previously, she served as Chief People Officer for Medtronic from 2010 to 2013 and EVP of Global Human Resources and Business Operations for Warner Music Group from 2005 to 2009. Before joining Warner Music Group, she served as the senior human resources leader in global divisions of American Express from 2002 to 2005 and General Electric from 1997 to 2002. Ms. Stockdale is a member of the Forbes Human Resources Council. Ms. Stockdale holds a Bachelor of Arts in political theories and institutions, and philosophy, from the University of Sheffield, England.

Jason Dymbort joined First Solar in March 2008 and was appointed General Counsel and Secretary in July 2020. He oversees First Solar’s legal department worldwide, including its transactional, trade, intellectual property, compliance, and corporate governance functions. In addition to his duties as General Counsel and Secretary, Mr. Dymbort directs the Company’s advocacy strategies, defining its responses to challenges and opportunities in areas such as trade and industrial policy. With nearly 17 years at First Solar, Mr. Dymbort’s experience covers every aspect of the solar value chain, from developing and constructing solar projects to marketing and selling utility-scale solar assets to manufacturing and supply chains. Between 2015 and 2018, Mr. Dymbort served as General Counsel and Secretary for the general partner of 8point3 Energy Partners, then a publicly-traded yieldco and affiliate of First Solar. Before joining First Solar, Mr. Dymbort was a corporate attorney at Cravath, Swaine & Moore LLP. He holds a Juris Doctor degree from the University of Pennsylvania Law School, where he was a member of the Penn Law Review, and a bachelor’s degree from Brandeis University.

Risk factors

As filed, 113,804 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

An investment in our stock involves a high degree of risk. You should carefully consider the following information, together with the other information in this Annual Report on Form 10-K, before buying shares of our stock. If any of the following risks or uncertainties occur, our business, financial condition, and results of operations could be materially and adversely affected and the trading price of our stock could decline.

Summary of Risk Factors

The following is a summary of the principal risks and uncertainties that could materially adversely affect our business, financial condition, and results of operations and make an investment in our stock speculative or risky. You should read this summary together with the more detailed description of each risk factor contained below.

Risks Related to Our Markets and Customers

  • Competition in solar markets globally and across the solar value chain is intense and could remain that way for an extended period of time. The solar industry may experience periods of structural imbalance between global PV module supply and demand that result in periods of pricing volatility. If our competitors reduce module pricing to levels near or below their manufacturing costs, or are able to operate at minimal or negative operating margins for sustained periods of time, or if global demand for PV modules decreases relative to installed production capacity, our business, financial condition, and results of operations could be adversely affected.
  • The modification, reduction, elimination, or expiration of government subsidies, economic incentives, tax incentives, renewable energy targets, and other support for on-grid solar electricity applications, or other public policies could negatively impact demand and/or price levels for our solar modules. The imposition of tariffs on our products or their related raw materials and components could materially increase our costs to perform under our contracts with customers, which could adversely affect our results of operations.
  • The loss of any of our large customers, or the inability of our customers and counterparties to perform under their contracts with us, could significantly reduce our net sales and negatively impact our results of operations.

Risks Related to Our Operations, Manufacturing, and Technology

  • We face intense competition from manufacturers of crystalline silicon solar modules; if global supply exceeds global demand, it could lead to a further reduction in the average selling price for PV solar modules, which could reduce our net sales and adversely affect our results of operations.
  • Problems with product quality or performance may cause us to incur significant and/or unexpected contractual damages and/or warranty and related expenses, damage our market reputation, and prevent us from maintaining or increasing our market share.
  • Our failure to further refine our technology and develop and introduce improved PV products, including as a result of delays in implementing planned advancements, could render our solar modules uncompetitive and reduce our net sales, profitability, and/or market share.
  • Several of our key raw materials and components, in particular CdTe, tellurium, products containing tellurium, and substrate glass, and manufacturing equipment are either single-sourced or sourced from a limited number of suppliers, and their failure to perform could cause manufacturing delays, especially as we expand or seek to expand our business, and/or impair our ability to deliver solar modules to customers in the required quality and quantities and at a price that is profitable to us.
  • Our failure to effectively manage module manufacturing production and selling costs, including costs related to raw materials and logistics services, could render our solar modules uncompetitive and reduce our net sales, profitability, and/or market share.
  • Our future success depends on our ability to effectively balance manufacturing production with market demand, effectively manage our cost per watt, and, when necessary, continue to build new manufacturing plants over time in response to market demand, all of which are subject to risks and uncertainties.
  • We may be unable to generate sufficient cash flows or have access to the sources of external financing necessary to fund planned capital investments in manufacturing capacity and product development.

Risks Related to Regulations

  • We have received and expect to continue to receive certain financial benefits as a result of tax incentives provided by the Inflation Reduction Act of 2022. If these financial benefits vary significantly from our assumptions, our business, financial condition, and results of operations could be adversely affected.
  • Existing regulations and policies, changes thereto, and new regulations and policies may present technical, regulatory, and economic barriers to the purchase and use of PV solar products, which may significantly reduce demand for our modules.

Risks Related to Our Markets and Customers

Competition in solar markets globally and across the solar value chain is intense and could remain that way for an extended period of time. The solar industry may experience periods of structural imbalance between global PV module supply and demand that result in periods of pricing volatility, which could have a material adverse effect on our business, financial condition, and results of operations.

In the aggregate, we believe manufacturers of solar cells and modules have significant installed production capacity, relative to global demand, and the ability for additional capacity expansion. For example, we estimate that in 2024 approximately 270 GW of capacity was added by solar module manufacturers, primarily in China. We believe the solar industry may from time to time experience periods of structural imbalance between supply and demand, and that excess capacity will continue to put pressure on pricing. Although module average selling prices in many global markets continue to decline, recent module pricing in the United States, our primary market, has been relatively stable due, in part, to the demand for domestically manufactured modules as a result of the IRA. There may be additional pressure on global demand and average selling prices in the future resulting from fluctuating demand in certain major solar markets, such as China. If our competitors reduce module pricing to levels near or below their manufacturing costs, or are able to operate at minimal or negative operating margins for sustained periods of time, or if global demand for PV modules decreases relative to installed production capacity, our business, financial condition, and results of operations could be adversely affected.

The modification, reduction, elimination, or expiration of government subsidies, economic incentives, tax incentives, renewable energy targets, and other support for on-grid solar electricity applications, or the impact of other public policies, such as tariffs or other trade remedies imposed on solar cells and modules or related raw materials or equipment, could negatively impact demand and/or price levels for our solar modules and limit our growth or lead to a reduction in our net sales or increase our costs, thereby adversely impacting our operating results.

Although we believe that solar energy will experience widespread adoption in those applications where it competes economically with traditional forms of energy without any incentive programs, in certain markets our net sales and profits remain subject to variability based on the availability and size of government subsidies and economic incentives. Federal, state, and local governmental bodies in many countries have provided subsidies in the form of feed-in-tariff structures, rebates, tax incentives, and other incentives to end users, distributors, system integrators, and manufacturers of PV solar products. Many of these incentive programs expire, phase down over time, require renewal by the applicable authority, or may be amended. A summary of certain recent developments in the major government incentive programs that may impact our business appears under Item 1. “Business – Incentive Programs.” To the extent these incentive programs are reduced earlier than previously expected, are changed retroactively, or are not renewed, such changes could negatively impact demand and/or price levels for our solar modules, lead to a reduction in our net sales, and adversely impact our operating results.

Current regulatory policies, or any future changes or threatened changes to such policies, including those changes as a result of the new presidential administration and control of the U.S. Congress, may subject us to significant risks, including the following:

  • a reduction or removal of clean energy programs and initiatives and the incentives they provide may diminish the market for future solar energy off-take agreements, slow the retirement of aging fossil fuel plants, including the retirements of coal generation plants, and reduce the ability for solar project developers to compete for off-take agreements, which may reduce PV solar module sales;
  • any limitations on the value or availability to manufacturers or potential investors of tax incentives that benefit solar energy production, sales, or projects, such as the Section 45X advanced manufacturing production credit, ITC, and PTC, could result in reducing such manufacturers’ or investors’ economic returns and could cause a reduction in the availability of financing, thereby reducing demand for PV solar modules;
  • any incentives contingent upon domestic production of modules, such as tax incentives set forth under the IRA, could limit our ability to sell modules manufactured in certain foreign jurisdictions, which may adversely impact our module average selling prices and could require us to record significant charges to earnings should we determine that the manufacturing equipment in such foreign jurisdictions is impaired; and
  • any effort to overturn federal and state laws, regulations, or policies that are supportive of solar energy generation or that remove costs or other limitations on other types of electricity generation that compete with solar energy projects could negatively impact our ability to compete with traditional forms of electricity generation and materially and adversely affect our business.

Application of trade laws may also impact, either directly or indirectly, our operating results. In some instances, the application of trade laws is currently beneficial to the Company, and changes in their application could have an adverse impact. Recent developments include the following:

  • United States — Tariffs on Certain Imported Crystalline Silicon PV Cells and Modules. The United States currently imposes different types of tariffs and/or other trade remedies on certain imported crystalline silicon PV cells and modules from various countries. In February 2022, the previous U.S. President proclaimed a four-year extension of a global safeguard measure imposed pursuant to Section 201 of the Trade Act of 1974 that provides for tariffs on imported crystalline silicon solar modules and a tariff-rate quota on imported crystalline silicon solar cells. Thin film solar cell products, such as our CdTe technology, are specifically excluded from the tariffs. The extension measure’s tariff rate was originally set at 14.75%, with annual reductions of 0.25 percentage points over the remainder of its four-year term. The current rate is 14.25%. The extension measure also provides an annual tariff-rate quota, whereby tariffs apply to imported crystalline silicon solar cells above the first 5.0 GW of imports.
  • United States — Antidumping and Countervailing Duties on Certain Imported Crystalline Silicon PV Cells and Modules. The United States currently imposes antidumping and countervailing duties (“AD/CVDs”) on certain imported crystalline silicon PV cells and modules from China and Taiwan. Such AD/CVDs can

change over time pursuant to annual administrative reviews conducted by the U.S. Department of Commerce (“USDOC”), and a decline in duty rates or USDOC failure to fully enforce U.S. AD/CVD laws could have an adverse impact on our operating results. In August 2023, the USDOC issued final affirmative circumvention rulings, finding that solar modules completed in Cambodia, Malaysia, Thailand, and Vietnam using parts and components produced in China circumvent the pre-existing AD/CVD orders on China. Such duties apply to circumventing imports on or after June 6, 2024, as well as any circumventing imports prior to that date that were not used or installed on or before December 3, 2024. Our operating results could be adversely impacted if the USDOC and other U.S. government agencies do not enforce the affirmative circumvention rulings as expected or if pending litigation challenges result in a modification of the rulings. Conversely, effective enforcement could positively impact our operating results.

  • United States — Antidumping and Countervailing Duties on Certain Imported Aluminum Extrusions. In October 2023, a coalition of U.S. aluminum extruders and a labor union filed AD/CVD petitions with the USDOC and the U.S. International Trade Commission (“USITC”) related to aluminum extrusions from 15 countries. We import certain items that are within the scope of the investigations. The USDOC issued preliminary and final antidumping determinations in May and September 2024, respectively, both of which found that our Malaysian supplier of aluminum extrusions was not dumping. The USITC issued a negative preliminary determination on the Dominican Republic in November 2023 and negative final determinations on the remaining 14 countries in October 2024, terminating the investigations with no application of AD/CVD. The Petitioners appealed the USITC’s negative determinations. Our operating results could be adversely impacted if pending litigation challenges result in a modification of the rulings.
  • United States — Antidumping and Countervailing Duties on Certain Traded Solar Products. In April 2024, the American Alliance for Solar Manufacturing Trade Committee, which includes First Solar, filed a set of AD/CVD petitions with the USDOC and the USITC to impose duties on certain unfairly traded solar products from Cambodia, Malaysia, Thailand, and Vietnam. The investigations could potentially lead to the imposition of AD/CVD orders on such solar products. In June 2024, the USITC issued affirmative preliminary determinations. In October 2024, the USDOC announced preliminary affirmative determinations in the CVD investigations, finding that silicon solar cells and panels from Cambodia, Malaysia, Thailand, and Vietnam are unfairly subsidized at rates ranging from de minimis to nearly 300%, depending on the particular foreign producer. The USDOC has imposed provisional CVDs accordingly. In November 2024, the USDOC announced preliminary affirmative determinations in the AD investigations, providing for certain preliminary dumping rates applicable to solar cells from Cambodia, Malaysia, Thailand, and Vietnam ranging from de minimis to approximately 270%, depending on the particular foreign producer. The USDOC is expected to announce final determinations in June 2025.
  • United States — Additional Tariffs on Certain Chinese Imports. The United States currently imposes tariffs on various articles imported from China, including tariffs of 50% on crystalline silicon solar cells and tariffs of 25% on modules, based on an investigation under Section 301 of the Trade Act of 1974. In February 2025, the U.S. President announced an additional 10% tariff on all imports from China, which is related to the national security threat posed by China’s trade in fentanyl and other illegal narcotics. This 10% tariff applies in addition to the 25% tariffs under Section 301 and ordinary customs duties and AD/CVDs. Our operating results could be adversely impacted if these tariffs were to be terminated or reduced.
  • United States — Tariffs on Certain Foreign-imported Aluminum and Steel. The United States currently imposes tariffs of 25% on imported aluminum and steel articles under Section 232 of the Trade Expansion Act of 1962. Such tariffs and policies, or any other U.S. or global trade remedies or other trade barriers, may directly or indirectly affect U.S. or global markets for solar energy and our business, financial condition, and results of operations.
  • India — Domestic and Foreign Imports. The Approved List of Models and Manufacturers (“ALMM”) was introduced in 2021 as a non-tariff barrier to incentivize domestic manufacturing of PV modules by approving the list of models and manufacturers who can participate in certain solar development projects. The ALMM is approved by the MNRE, and any modifications to the ALMM and its application may affect future investments in solar module manufacturing in India. In April 2024, the government of India reimposed the ALMM, thereby requiring solar project developers to procure qualifying modules from companies on the list, which includes our Indian manufacturing facility. Also in April 2024, the ALMM was amended to include specific minimum conversion efficiency thresholds for CdTe solar technologies starting at 18% for solar lighting, 18.5% for rooftop applications, and 19% for utility-scale applications. In December 2024, the ALMM was amended to require nearly all solar development projects to use PV modules that contain domestically manufactured solar cells, which is expected to be effective for such projects completed on or after June 2026. Our operating results could be adversely impacted if the ALMM requirements are significantly relaxed to allow modules, solar cells, or certain other key module components to be imported from other countries.
  • India — Import Duty Tariffs. In April 2022, the Indian government began imposing import duty tariffs of 40% on solar modules and 25% on solar cells. In connection with such April 2022 tariffs, the Indian government also implemented a regulation mandating that any solar project with federal utility, state utility, or commercial and industrial off-takers that interconnects through government owned transmission lines only use solar modules from manufacturers included in the ALMM, and a requirement that all federal procurement of solar modules be only from cells and modules produced domestically. However, in February 2025, the Indian government began imposing import duty tariffs of 20% each on solar modules and cells and levied additional tax on certain commercial agricultural production, which tax included of 20% on solar modules and 7.5% on solar cells. Therefore, the aggregate impact on the import of solar modules and cells is 40% and 27.5%, respectively.

These examples show that established markets for PV solar development face uncertainties arising from policy, regulatory, and governmental actions. While the expected potential of the markets we are targeting is significant, policy promulgation and market development are especially vulnerable to governmental inertia, political instability, the imposition or lowering of trade remedies and other trade barriers, geopolitical risk, fossil fuel subsidization, potentially stringent localization requirements, and limited available infrastructure.

The loss of any of our large customers, or the inability of our customers and counterparties to perform under their contracts with us, could significantly reduce our net sales and negatively impact our results of operations.

Our customers include developers and operators of systems, utilities, independent power producers, commercial and industrial companies, and other system owners, who may experience intense competition at the system level, thereby constraining the ability for such customers to sustain meaningful and consistent profitability. The loss of any of our large customers, their inability to perform under their contracts, or their default in payment could significantly reduce our net sales and/or adversely impact our operating results. While our contracts with customers typically have certain firm purchase commitments and may include provisions for the payment of amounts to us in certain events of contract termination, these contracts may be subject to amendments made by us or requested by our customers. These contract terminations or amendments may reduce the volume of modules to be sold under the contract, adjust delivery schedules, and/or otherwise decrease the expected revenue under these contracts and could significantly reduce our net sales and negatively impact our results of operations. Additionally, although we require some form of payment security from our customers, such as cash deposits, parent guarantees, bank guarantees, surety bonds, or commercial letters of credit, in the event the providers of such payment security fail to perform their obligations, our operating results could be adversely impacted.

An increase in interest rates or tightening of the supply of capital in the global financial markets (including a reduction in total tax equity availability) could make it difficult for customers to finance the cost of a PV solar power system and could reduce the demand for our modules and/or lead to a reduction in the average selling price for our modules.

Many of our customers depend on debt and/or equity financing to fund the initial capital expenditure required to develop, build, and/or purchase a PV solar power system. As a result, an increase in interest rates, or a reduction in the supply of project debt financing or tax equity investments, could reduce the number of solar projects that receive financing or otherwise make it difficult for our customers to secure the financing necessary to develop, build, purchase, or install a PV solar power system on favorable terms, or at all, and thus lower demand for our solar modules, which could limit our growth or reduce our net sales. For additional information, see the Risk Factor entitled, “The modification, reduction, elimination, or expiration of government subsidies, economic incentives, tax incentives, renewable energy targets, and other support for on-grid solar electricity applications, or the impact of other public policies, such as tariffs or other trade remedies imposed on solar cells and modules or related raw materials or equipment, could negatively impact demand and/or price levels for our solar modules and limit our growth or lead to a reduction in our net sales or increase our costs, thereby adversely impacting our operating results.” In addition, we believe that a significant percentage of our customers install systems as an investment, funding the initial capital expenditure through a combination of equity and debt. An increase in interest rates could lower an investor’s return on investment in a system, increase equity return requirements, or make alternative investments more attractive relative to PV solar power systems and, in each case, could cause these customers to seek alternative investments.

We may be unable to execute our long-term strategic plans, which could have a material adverse effect on our business, financial condition, or results of operations.

We face numerous difficulties in executing on our long-term strategic plans, particularly in new foreign jurisdictions, including the following:

  • difficulty in competing against companies who may have greater financial resources and/or a more effective or established localized business presence and/or an ability to operate with minimal or negative operating margins for sustained periods of time;
  • difficulty in competing successfully with other technologies, such as crystalline silicon, hybrid perovskites, tandem solar cells, or other thin films;
  • difficulty in accurately prioritizing geographic markets that we can most effectively and profitably serve with our solar module offerings, including miscalculations in overestimating or underestimating addressable market demand;
  • adverse public policies in countries we operate in and/or are pursuing, including local content requirements, the imposition of trade remedies, the removal of trade barriers, the imposition of tariffs, or capital investment requirements;
  • business climates, such as that in China, that may have the effect of putting foreign companies at a disadvantage relative to domestic companies;
  • unstable or adverse economic, social, and/or operating environments, including social unrest, currency, inflation, and interest rate uncertainties;
  • the possibility of applying an ineffective commercial approach to targeted markets, including product offerings that may not meet market needs;
  • difficulty in generating sufficient sales volumes at economically sustainable profitability levels;
  • difficulty in timely identifying, attracting, training, and retaining qualified sales, technical, and other talent;
  • difficulty in realizing the potential benefits of strategic acquisitions and investments;
  • difficulty in maintaining proper controls and procedures as we expand our business operations in terms of geographical reach, including transitioning certain business functions to low-cost geographies, with any material control failure potentially leading to reputational damage and loss of confidence in our financial reporting;
  • difficulty in competing successfully for market share in overall solar markets as a result of the success of companies participating in other solar segments in which we do not have significant historical experience, such as residential;
  • difficulty in establishing and implementing a commercial and operational approach adequate to address the specific needs of the markets we are pursuing;
  • difficulty in identifying effective local partners and developing any necessary partnerships with local businesses on commercially acceptable terms; and
  • difficulty in balancing market demand and manufacturing production in an efficient and timely manner, potentially causing our manufacturing capacity to be constrained in some future periods or over-supplied in others.

Refer also to the Risk Factors entitled, “Our substantial international operations subject us to a number of risks, including unfavorable political, regulatory, labor, and tax conditions in the United States and/or foreign countries,” “The modification, reduction, elimination, or expiration of government subsidies, economic incentives, tax incentives, renewable energy targets, and other support for on-grid solar electricity applications, or the impact of other public policies, such as tariffs or other trade remedies imposed on solar cells and modules or related raw materials or equipment, could negatively impact demand and/or price levels for our solar modules and limit our growth or lead to a reduction in our net sales or increase our costs, thereby adversely impacting our operating results,” and “We may be unable to generate sufficient cash flows or have access to the sources of external financing necessary to fund planned capital investments in manufacturing capacity and product development.”

Risks Related to Our Operations, Manufacturing, and Technology

We face intense competition from manufacturers of crystalline silicon solar modules; if global supply exceeds global demand, it could lead to a further reduction in the average selling price for PV solar modules, which could reduce our net sales and adversely affect our results of operations.

The solar and renewable energy industries are highly competitive and are continually evolving as participants strive to distinguish themselves within their markets and compete with the larger electric power industry. Within the global PV solar industry, we face intense competition from crystalline silicon module manufacturers. Existing or future module manufacturers might be acquired by larger companies with significant capital resources, thereby further intensifying competition with us. In addition, the introduction of a low-cost disruptive technology could adversely affect our ability to compete, which could reduce our net sales and adversely affect our results of operations.

We expect to compete with future entrants into the PV solar industry and existing market participants that offer new or differentiated technological solutions. For example, while conventional solar modules are monofacial, meaning their ability to produce energy is a function of direct and diffuse irradiance on their front side, most module manufacturers offer bifacial modules that also capture diffuse irradiance on the back side of a module. Such technology can improve the overall energy production of a module relative to nameplate efficiency when applied in certain applications, which could potentially lower the overall LCOE of a system when compared to systems using conventional solar modules, including the modules we currently produce. Additionally, certain module manufacturers have introduced n-type mono-crystalline modules, such as tunnel oxide passivated contact (“TOPCon”) modules, which are expected to provide certain improvements to module efficiency, temperature coefficient, and bifacial performance, and claim to provide certain degradation advantages compared to other mono-crystalline modules. Finally, many of our competitors are promoting modules with larger overall area based on the use of larger silicon wafers. While the transition to such larger wafers would increase nameplate wattage, we believe the associated production cost would not improve significantly.

Even if demand for solar modules continues to grow, the rapid manufacturing capacity expansion undertaken by many module manufacturers in China and certain parts of Southeast Asia, particularly manufacturers of crystalline silicon wafers, cells, and modules, has created and may continue to cause periods of structural imbalances between supply and demand. For additional information, see the Risk Factor entitled, “Competition in solar markets globally and across the solar value chain is intense and could remain that way for an extended period of time. The solar industry may experience periods of structural imbalance between global PV module supply and demand that result in periods of pricing volatility, which could have a material adverse effect on our business, financial condition, and results of operations.” In addition, we believe any significant decrease in the cost of silicon feedstock or polysilicon would reduce the manufacturing cost of crystalline silicon modules and lead to further pricing pressure for solar modules and potentially an oversupply of solar modules.

Our competitors could decide to reduce their sales prices in response to competition, even below their manufacturing costs, in order to generate sales, and may do so for a sustained period. Certain competitors, including many in China, may have direct or indirect access to sovereign capital or other forms of state support, which could enable such competitors to operate at minimal or negative operating margins for sustained periods of time. As a result, we may be unable to sell our solar modules at attractive prices, or for a profit, during any period of excess supply of solar modules, which would reduce our net sales and adversely affect our results of operations. Additionally, we may decide to lower our average selling prices to customers in certain markets in response to competition, which could also reduce our net sales and adversely affect our results of operations.

Problems with product quality or performance may cause us to incur significant and/or unexpected contractual damages and/or warranty and related expenses, damage our market reputation, and prevent us from maintaining or increasing our market share.

We perform a variety of module quality and life tests under different environmental conditions upon which we base our assessments of future module performance over the duration of the warranty. However, if our thin film solar modules perform below expectations, we could experience significant warranty and related expenses, damage to our market reputation, and erosion of our market share. With respect to our modules, we provide a limited warranty covering defects in materials and workmanship under normal use and service conditions for up to 12.5 years. We also typically warrant that modules installed in accordance with agreed-upon specifications will produce at least 98% of their labeled power output rating during the first year, with the warranty coverage reducing by a degradation factor every year thereafter throughout the limited power output warranty period of up to 30 years. Among other things, our solar module warranty also covers the resulting power output loss from cell cracking.

We have identified manufacturing issues affecting certain Series 7 modules manufactured in 2023 and 2024 that may cause the modules to experience premature power loss once installed in the field. We currently believe the primary causes of the issues have been identified and we have taken actions to address such issues. The ultimate loss we will incur for these manufacturing issues will depend on the extent of the premature power loss that is experienced in relation to the obligations under our limited product warranties, as well as any additional commitments we may make to remediate the affected modules. Based on currently available information and certain assumptions and estimates, we believe a reasonable estimate of the aggregate losses related to these manufacturing issues will range from approximately $56 million to $100 million. At this time, no individual amount within that range is a better estimate than any other amount. Accordingly, we increased our product warranty liability by the low end of the range. The estimated range set forth above was based on our evaluation of the currently available information, including select samples of module performance data from several locations, the estimated number of affected modules, and projections of probable costs to remediate the issues. If any of our estimates or assumptions related to the above referenced manufacturing issues are not accurate, we may be required to accrue additional expenses, which could adversely impact our reputation, financial position, operating results, and cash flows.

If any of the other assumptions used in estimating our module warranties prove incorrect, we may also be required to accrue additional expenses, which could adversely impact our financial position, operating results, and cash flows. Although we have taken significant precautions to avoid future manufacturing issues from occurring, any manufacturing issues, including any additional commitments made by us to take remediation actions in respect of affected modules beyond the stated remedies in our warranties, could also adversely impact our reputation, financial position, operating results, and cash flows.

Although our module performance warranties extend for up to 30 years, our oldest solar modules manufactured during the qualification of our pilot production line have only been in use since 2001. Accordingly, our warranties are based on a variety of quality and life tests that enable predictions of durability and future performance. These predictions, however, could prove to be materially different from the actual performance during the warranty period, causing us to incur substantial expense to repair or replace defective solar modules or provide financial remuneration in the future. For example, our solar modules could suffer various failures, including breakage, delamination, corrosion, or performance degradation in excess of expectations, and our manufacturing operations or supply chain could be subject to material or process variations that could cause affected modules to fail or underperform compared to our expectations. These risks could be amplified as we implement design and process changes in connection with our efforts to improve our products and module wattage as part of our long-term strategic plans. In addition, if we increase the number of installations in extreme climates, we may experience increased failure rates due to deployment into such field conditions. Any widespread product failures may damage our market reputation, cause our net sales to decline, require us to repair or replace the defective modules or provide financial remuneration, and result in us taking voluntary remedial measures beyond those required by our standard warranty terms to enhance customer satisfaction, which could have a material adverse effect on our reputation, financial position, operating results, and cash flows.

In resolving claims under both the limited defect and power output warranties, we typically have the option of either repairing or replacing the covered modules or, under the limited power output warranty, providing additional modules to remedy the power shortfall or making certain cash payments; however, historical versions of our module warranty did not provide a refund remedy. Consequently, we may be obligated to repair or replace the covered modules under such historical programs. As our manufacturing process may change from time-to-time in accordance with our technology roadmap, we may elect to stop production of older versions of our modules that would constitute compatible replacement modules. In some jurisdictions, our inability to provide compatible replacement modules could potentially expose us to liabilities beyond the limitations of our module warranties, which could adversely impact our reputation, financial position, operating results, and cash flows.

In addition to our limited solar module warranties described above, for PV solar power systems we have constructed for customers in prior periods, we have provided limited warranties for defects in engineering design, installation, and balance of systems (“BoS”) part workmanship for a period of one to two years following the substantial completion of a system or a block within the system. BoS parts represent mounting, electrical, and other parts used in PV solar power systems. In resolving claims under such BoS warranties, we have the option of remedying the defect through repair or replacement. As with our modules, these warranties are based on a variety of quality and life tests that enable predictions of durability and future performance. Any underperformance or failures in BoS equipment beyond our expectations may also adversely impact our reputation, financial position, operating results, and cash flows.

In addition, our contracts with customers may include provisions with particular product specifications, minimum wattage requirements, and specified delivery schedules. These contracts may be terminated, or we may incur significant liquidated damages or other damages, if we fail to perform our contractual obligations. In addition, our costs to perform under these contracts may exceed our estimates, which could adversely impact our profitability. Any failures to comply with our contracts for the sale of our modules could adversely impact our reputation, financial position, operating results, and cash flows.

Our failure to further refine our technology and develop and introduce improved PV products, including as a result of delays in implementing planned advancements, could render our solar modules uncompetitive and reduce our net sales, profitability, and/or market share.

We need to continue to invest significant financial resources in R&D to further improve the energy yield of our modules and otherwise keep pace with technological advances in the solar industry. However, R&D activities are inherently uncertain, and we could encounter difficulties in commercializing our research results. We seek to continuously improve our products and processes, including, for example, certain planned improvements to our CdTe module technology and manufacturing capabilities, and the resulting changes carry potential risks in the form of delays, performance, additional costs, or other unintended contingencies. For example, we commenced a limited commercial production run of modules employing our copper replacement (“CuRe”) technology in late 2024 and intend to begin a phased replication of the technology across our fleet in the first quarter of 2026. Our CuRe program is intended to improve our current semiconductor structure by replacing copper with certain other elements that are expected to enhance module performance by improving its bifaciality characteristics, improving its temperature coefficient, and improving its warranted degradation. These technology attributes must be proven to be effective in real-world operating conditions. We may encounter unanticipated challenges as we implement design and process changes in connection with the CuRe program and other technology improvements.

We may expand our portfolio of offerings to include solutions that build upon our core competencies but for which we have not had significant historical experience, including variations in our traditional product offerings or other offerings related to certain markets. There can be no guarantee that our significant R&D expenditures will produce corresponding benefits. Other companies are developing a variety of competing PV technologies, including advanced p-type and n-type crystalline silicon cells, and new emerging technologies such as hybrid perovskites, tandem solar cells, or other thin films, which could result in solar modules that prove to be more cost-effective or have better performance than our solar modules. If we are unable to achieve the necessary technology improvements to remain competitive, our overall growth and financial performance may be limited relative to our competitors and our operating results could be adversely impacted.

We often forward price our products in anticipation of future technology improvements. Furthermore, certain of our contracts with customers may include transaction price adjustments associated with future module technology improvements, including enhancements to certain energy related attributes. Accordingly, our operating results could be adversely affected by (i) an inability to further refine our technology and execute our module technology roadmap, (ii) changes to the expected timing of such improvements being incorporated into our manufacturing process, and/or (iii) changes to expected and/or actual manufacturing timelines, especially as a result of key raw material sourcing.

Some of our manufacturing equipment is customized and sole sourced. If our manufacturing equipment fails or if our equipment suppliers fail to perform under their contracts, we could experience production disruptions and be unable to satisfy our contractual requirements.

Some of our manufacturing equipment is customized to our production lines based on designs or specifications that we provide to equipment manufacturers, which then undertake a specialized process to manufacture the custom equipment. As a result, the equipment is not readily available from multiple vendors and would be difficult to repair or replace if it were to become delayed, damaged, or stop working. If any piece of equipment fails, production along the entire production line could be interrupted. In addition, the failure of our equipment manufacturers to supply equipment in a timely manner or on commercially reasonable terms could delay our expansion or conversion plans, otherwise disrupt our production schedule, and/or increase our manufacturing costs, all of which would adversely impact our operating results.

Several of our key raw materials and components are either single-sourced or sourced from a limited number of suppliers, and their failure to perform could cause manufacturing delays and impair our ability to deliver solar modules to customers in the required quality and quantities and at a price that is profitable to us.

Our failure to obtain raw materials and components that meet our quality, quantity, and cost requirements in a timely manner could interrupt or impair our ability to manufacture our solar modules, or increase our manufacturing costs. Several of our key raw materials and components, in particular CdTe and substrate glass, are either single-sourced or sourced from a limited number of suppliers. As a result, the failure of any of our suppliers to perform could disrupt our supply chain and adversely impact our operations. In addition, some of our suppliers are smaller companies that may be unable to supply our increasing demand for raw materials and components as we expand or seek to expand our business. We may be unable to identify new suppliers or qualify their products for use on our production lines in a timely manner and on commercially reasonable terms. A constraint on our production may result in our inability to meet our capacity plans and/or our obligations under our customer contracts, which would have an adverse impact on our business. Additionally, reductions in our production volume may put pressure on suppliers, resulting in increased material and component costs.

A disruption in our supply chain for CdTe, tellurium, products containing tellurium, or other key raw materials, or equipment could interrupt or impair our ability to manufacture solar modules and could adversely impact our profitability and long-term growth prospects.

A key raw material used in our module production process is a CdTe compound. Tellurium, one of the main components of CdTe, is mainly produced as a by-product of copper refining, and therefore, its supply is largely dependent upon demand for copper. If our competitors begin to use or increase their demand for tellurium, our requirements for tellurium increase, new applications for tellurium emerge, or adverse trade laws or policies restrict our ability to obtain tellurium from foreign vendors or make doing so cost prohibitive, the supply of tellurium, products containing tellurium, and related CdTe compounds could be reduced and prices could increase. For example, in early February 2025, China announced that it would tighten export controls for five key minerals, including products containing tellurium. As mentioned above, tellurium is one of the main components of our CdTe module production process. Although tellurium and products containing tellurium are sourced globally, China is a major global producer of tellurium and products containing tellurium. Exporters of tellurium and related products may be required to obtain a license from the Chinese Ministry of Commerce, which may be difficult, costly, and time-consuming, and our suppliers may not be successful in obtaining necessary export licenses in a timely manner or at all. Challenges in obtaining required export licenses may disrupt certain aspects of our supply chain for tellurium and products containing tellurium, which could result in raw material cost increases and/or disrupted production timelines. A constraint on our production may result in our inability to (i) meet our capacity plans, (ii) meet obligations under our customer contracts, and/or (iii) realize transaction price adjustments associated with future module technology improvements, which could adversely impact our profitability and long-term growth objectives. See Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations – Certain Trends and Uncertainties” for additional information regarding China’s export controls.

Furthermore, our supply chain could be limited if any of our current or future suppliers fail to perform or are unable to acquire an adequate supply in a timely manner or at commercially reasonable prices. If our current or future suppliers cannot obtain sufficient raw materials or key equipment, they could substantially increase prices or be unable to perform under their contracts. Additionally, we may also be unable to effectively manage fluctuations in the availability and cost of logistics services associated with the procurement of raw materials or equipment used in our manufacturing process. If we are unable to pass such cost increases to our customers, a substantial increase in prices or any limitations or disruptions in our supply chain could adversely impact our profitability and long-term growth objectives.

Our failure to effectively manage module manufacturing production and selling costs, including costs related to raw materials and logistics services, could render our solar modules uncompetitive and reduce our net sales, profitability, and/or market share.

Certain of our key raw material purchase contracts include variable pricing terms, which are driven by underlying indices for certain commodities, including aluminum, steel, and natural gas, among others. Fluctuations in such underlying commodity indices may increase our raw material costs. For example, in February 2025, the U.S. President announced an additional 10% tariff on all imports from China, which is related to the national security threat posed by China’s trade in fentanyl and other illegal narcotics. For additional information about global tariffs and trade developments, see the Risk Factor entitled, “The modification, reduction, elimination, or expiration of government subsidies, economic incentives, tax incentives, renewable energy targets, and other support for on-grid solar electricity applications, or the impact of other public policies, such as tariffs or other trade remedies imposed on solar cells and modules or related raw materials or equipment, could negatively impact demand and/or price levels for our solar modules and limit our growth or lead to a reduction in our net sales or increase our costs, thereby adversely impacting our operating results.”

Additionally, an increase in price levels generally, such as inflation related to the cost of raw materials, key manufacturing equipment, labor, and logistics services, could adversely impact our profitability. From time to time, we may utilize derivative hedging instruments to mitigate price changes related to our raw materials or key manufacturing equipment. Our profitability could be adversely impacted if we are unable to effectively hedge such prices or pass these cost increases through to our customers. We often forward price our products in anticipation of future cost reductions, and thus, an inability to execute our cost reduction roadmap could adversely affect our operating results.

Our future success depends on our ability to effectively balance manufacturing production with market demand, effectively manage our cost per watt, and, when necessary, continue to build new manufacturing plants over time in response to market demand, all of which are subject to risks and uncertainties.

Our future success depends on our ability to effectively balance manufacturing production with market demand, effectively manage our cost per watt, and increase our manufacturing capacity in a cost-effective and efficient manner. If we cannot do so, we may incur damages under our contracts with our customers or be unable to decrease our cost per watt, maintain our competitive position, sustain profitability, expand our business, or create long-term shareholder value. Our ability to effectively manage our cost per watt or successfully expand production capacity is subject to significant risks and uncertainties, including the following:

  • failure to reduce manufacturing material, labor, or overhead costs;
  • an inability to increase production throughput or the average power output per module, or minimize manufacturing yield losses;
  • failure to effectively manage the availability and cost of logistics services associated with the procurement of raw materials or equipment used in our manufacturing process and the shipping, handling, storage, and distribution of our modules;
  • delays and cost overruns as a result of a number of factors, many of which may be beyond our control, such as our inability to secure economical contracts with equipment vendors;
  • our custom-built equipment taking longer and costing more to manufacture than expected and not operating as designed;
  • delays or denial of required approvals by relevant government authorities;
  • an inability to hire qualified staff;
  • capital expenditures exceeding our initial estimates with respect to expanding and building our manufacturing and R&D facilities;
  • difficulty in balancing market demand and manufacturing production in an efficient and timely manner, potentially causing our manufacturing capacity to be constrained in some future periods or over-supplied in others; and
  • incurring manufacturing asset write-downs, write-offs, and other charges and costs, which may be significant, during those periods in which we idle, slow down, shut down, or otherwise adjust our manufacturing capacity.

If there is a delay or disruption in the construction or expansion of our manufacturing facilities, we may incur costs due to the postponed production generated by these facilities.

We may be unable to generate sufficient cash flows or have access to the sources of external financing necessary to fund planned capital investments in manufacturing capacity and product development.

Our business and our future plans for expansion are capital-intensive, and we anticipate that our operating and capital expenditure requirements may increase. To develop new products, support future growth, and maintain product quality, we may need to make significant capital investments in manufacturing technology, facilities and capital equipment, and R&D. Consequently, we may seek to raise additional funds through the issuance of equity, equity-related, or debt securities, through obtaining credit from financial institutions to fund, together with our traditional sources of liquidity, the costs of developing and manufacturing our current or future products, or through the sale of tax credits. We cannot be certain that we will be able to generate sufficient cash flows, or that additional funds will be available to us on favorable terms when required, or at all. If we cannot fund the required investments from our operating cash flows or raise additional funds when we need them, we may be unable to fully execute our business plan and our financial condition, results of operations, and business prospects could be materially and adversely affected.

If our estimates regarding the future costs of collecting and recycling CdTe solar modules covered by our solar module collection and recycling program are incorrect, we could be required to accrue additional expenses and face a significant unplanned cash burden.

As necessary, we fund any incremental amounts for our estimated collection and recycling obligations on an annual basis based on the estimated costs of collecting and recycling covered modules, estimated rates of return on our restricted marketable securities, and an estimated solar module life of 25 years less amounts already funded in prior years. We estimate the cost of our collection and recycling obligations based on the present value of the expected future cost of collecting and recycling the solar modules, which includes estimates for the cost of packaging materials; the cost of freight from the solar module installation sites to a recycling center; material, labor, and capital costs; by-product credits for certain materials recovered during the recycling process; the estimated useful lives of modules covered by the program; and the number of modules expected to be recycled. We base these estimates on our experience collecting and recycling solar modules and certain assumptions regarding costs at the time the solar modules will be collected and recycled. If our estimates prove incorrect, we could be required to accrue additional expenses and could also face a significant unplanned cash burden at the time we realize our estimates are incorrect or end users return their modules, which could adversely affect our operating results. Participating end users can return their modules covered under the collection and recycling program at any time. As a result, we could be required to collect and recycle covered CdTe solar modules earlier than we expect.

Our failure to protect or successfully commercialize our intellectual property rights may undermine our competitive position, and litigation to protect our intellectual property rights or defend against third-party allegations of infringement may be costly.

Protection of our proprietary processes, methods, and other technology is critical to our business. Failure to protect and monitor the use of our existing intellectual property rights or to successfully commercialize future intellectual property rights could result in the loss of valuable technologies. We rely primarily on patents, trademarks, trade secrets, copyrights, and contractual restrictions to protect our intellectual property. We regularly file patent applications to protect certain inventions arising from our R&D and are currently pursuing such patent applications in various countries in accordance with our strategy for intellectual property in that jurisdiction. Our existing patents and future patents could be challenged, invalidated, circumvented, or rendered unenforceable. Our pending patent applications may not result in issued patents, or if patents are issued to us, such patents may not be sufficient to provide meaningful protection against competitors or against competitive technologies.

We also rely on unpatented proprietary manufacturing expertise, continuing technological innovation, and other trade secrets to develop and maintain our competitive position. Although we generally enter into confidentiality agreements with our associates and third parties to protect our intellectual property, such confidentiality agreements are limited in duration and could be breached and may not provide meaningful protection for our trade secrets or proprietary manufacturing expertise. Adequate remedies may not be available in the event of unauthorized use or disclosure of our trade secrets and manufacturing expertise. In addition, others may obtain knowledge of our trade secrets through independent development or legal means. The failure of our patents or confidentiality agreements to protect our processes, equipment, technology, trade secrets, and proprietary manufacturing expertise, methods, and compounds could have a material adverse effect on our business. In addition, effective patent, trademark, copyright, and trade secret protection may be unavailable or limited in some foreign countries, especially any developing countries into which we may expand our operations. In some countries, we have not applied for patent, trademark, or copyright protection.

Third parties may infringe or misappropriate our proprietary technologies or other intellectual property rights, which could have a material adverse effect on our business, financial condition, and operating results. Policing unauthorized use of proprietary technology can be difficult and expensive. Additionally, litigation may be necessary to enforce our intellectual property rights, protect our trade secrets, or determine the validity and scope of the proprietary rights of others. For example, on February 25, 2025, we filed a lawsuit in the United States District Court for the District of Delaware against JinkoSolar and its related entities alleging infringement of certain of our U.S. TOPCon patents. We cannot ensure that the outcome of such potential litigation will be in our favor, and such litigation may be costly and may divert management attention and other resources away from our business. An adverse determination in any such litigation may impair our intellectual property rights and may harm our business, prospects, and reputation. In addition, we have no insurance coverage against such litigation costs and would have to bear all costs arising from such litigation to the extent we are unable to recover them from other parties.

If any future production lines are not built in line with committed schedules, it may adversely affect our future growth plans. If any future production lines do not achieve operating metrics similar to our existing production lines, our solar modules could perform below expectations and cause us to lose customers.

If we are unable to systematically replicate our production lines over time and achieve operating metrics similar to our existing production lines, our manufacturing capacity could be substantially constrained, our manufacturing costs per watt could increase, our growth could be limited, and we may be in breach of our contracts with customers for failure to deliver modules. Such factors may result in lower net sales, and/or lower net income than we anticipate. Future production lines could produce solar modules that have lower conversion efficiencies, higher failure rates, and/or higher rates of degradation than solar modules from our existing production lines, and we could be unable to determine the cause of the lower operating metrics or develop and implement solutions to improve performance.

We are in the process of expanding our manufacturing capacity by approximately 4 GW including the construction of our fifth U.S. manufacturing facility, which is expected to commence operations in the second half of 2025. If we cannot successfully execute on our current capacity expansion plans, we may incur significant costs in excess of our expected investment for these new facilities. If we are not able to effectively manage current or future expansion activities or realize their anticipated benefits, it may adversely impact our results of operations.

Our substantial international operations subject us to a number of risks, including unfavorable political, regulatory, labor, and tax conditions in the United States and/or foreign countries.

We have significant manufacturing, sales, and marketing operations both within and outside the United States and expect to continue to expand our operations worldwide. Our global business requires us to respond to rapid changes in market conditions worldwide. Our overall success depends, in part, on our ability to succeed in differing legal, regulatory, economic, social, and political conditions. For example, in response to market conditions and an unfavorable policy environment in Europe, we have decided to scale down our footprint in Europe and to focus our business development efforts in the United States and India. We may not be able to timely develop and implement policies and strategies that will be effective in each location where we do business. Risks inherent to international operations include, but are not limited to, the following:

  • difficulty in enforcing agreements in foreign legal systems;
  • varying degrees of protection afforded to foreign investments in the countries in which we operate and irregular interpretations and enforcement of laws and regulations in such jurisdictions;
  • foreign countries may impose additional income and withholding taxes or otherwise tax our foreign operations, impose tariffs, or adopt other controls or restrictions on foreign trade and investment, including currency exchange controls;
  • fluctuations in exchange rates may affect demand for our products and services and may adversely affect our profitability and cash flows in U.S. dollars to the extent that our net sales or our costs are denominated in a foreign currency and the cost associated with hedging the U.S. dollar equivalent of such exposures is prohibitive; the longer the duration of such foreign currency exposure, the greater the risk;
  • anti-corruption compliance issues, including the costs related to the mitigation of such risk;
  • risk of nationalization or other expropriation of private enterprises;
  • changes in general economic and political conditions in the countries in which we operate, including changes in government incentive provisions and government program funding;
  • unexpected adverse changes in U.S. or foreign laws or regulatory requirements, including those with respect to environmental protection, import or export duties, tariffs, and quotas;
  • opaque approval processes in which the lack of transparency may cause delays and increase the uncertainty of project approvals;
  • difficulty in staffing and managing widespread operations;
  • difficulty in repatriating earnings;
  • difficulty in negotiating a successful collective bargaining agreement in applicable foreign jurisdictions;
  • trade barriers such as export requirements, tariffs, taxes, local content requirements, anti-dumping regulations and requirements, and other restrictions and expenses, which could increase the effective price of our solar modules and make us less competitive in some countries or increase the costs to perform under our existing contracts; and
  • difficulty of, and costs relating to, compliance with the different commercial and legal requirements of the overseas countries in which we offer and sell our solar modules.

Although we have implemented policies and procedures designed to ensure compliance with the laws, regulations, and policies in each jurisdiction in which we operate, there can be no assurance that all of our employees, contractors, service providers, business partners, and agents will comply with these laws, regulations, and policies.

Risks Related to Regulations

We have received and expect to continue to receive certain financial benefits as a result of tax incentives provided by the Inflation Reduction Act of 2022. If these financial benefits vary significantly from our assumptions, our business, financial condition, and results of operations could be adversely affected.

In August 2022, the previous U.S. President signed the IRA into law, which was intended to accelerate the country’s ongoing energy transition. The provisions of the IRA are generally effective for tax years beginning after 2022. We continue to evaluate the extent of benefits available to us, which we expect will favorably impact our results of operations in future periods. For example, we currently expect to qualify for the advanced manufacturing production credit under Section 45X of the IRC, which provides certain specified benefits for solar modules and certain solar module components manufactured in the United States and sold to third parties. For eligible components, the credit is equal to (i) $12 per square meter for a PV wafer, (ii) 4 cents multiplied by the capacity of a PV cell in watts, and (iii) 7 cents multiplied by the capacity of a PV module in watts. Based on the current form factor of our modules, we expect to qualify for a credit of approximately 17 cents per watt for each module produced in the United States and sold to a third party.

Such credit may be refundable by the IRS or transferable to a third party and is available from 2023 to 2032, subject to phase down beginning in 2030. For example, in December 2024 and December 2023, we entered into various agreements for the sales of Section 45X tax credits we generated in 2024 and 2023, respectively. For further information, see Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations – Liquidity and Capital Resources.” However, there is no assurance that future sales of tax credits will be available to us on similar or alternative terms or at all. Furthermore, the potential policies of the new U.S. presidential administration and Congress have raised some uncertainty as to the continued availability of financial benefits available to us and others as a result of tax incentives provided by the IRA. For example, on January 20, 2025, the U.S. President issued an executive order entitled, “Unleashing American Energy,” which, among other things, indicated a lack of support for federal funding of certain solar and solar-related projects.

Certain developments to technical guidance and regulations include the following:

  • In March 2024, the U.S. Treasury Department and the IRS issued final regulations on the direct payment election under Section 6417 of the IRC. The final regulations apply to tax years ending on or after March 11, 2024, but taxpayers may choose to apply the rules in the final regulations in taxable years ending before March 11, 2024, provided the final regulations are applied in their entirety and in a consistent manner. The final regulations mostly adopted and confirmed the proposed regulations previously issued in June 2023.
  • In April 2024, the U.S. Treasury Department and the IRS issued final regulations on the elective transfer provisions under Section 6418 of the IRC. The final regulations apply to taxable years ending on or after April 30, 2024, but taxpayers may choose to apply the rules in the final regulations in taxable years ending before April 30, 2024, provided the final regulations are applied in their entirety and in a consistent manner. The final regulations mostly adopted and confirmed the proposed regulations previously issued in June 2023.
  • In October 2024, the U.S. Treasury Department and the IRS issued final regulations on the Section 45X credit confirming key aspects of the credit, including (i) that a vertically-integrated solar module manufacturer is entitled to the sum of the credit amounts for each eligible component that is integrated into the solar module, (ii) the determination of the credit amounts based on standard test conditions, and (iii) the definition of a Section 45X manufacturing facility.

Any modifications to the law or its effects arising, for example, through (i) technical guidance and regulations from the IRS and U.S. Treasury Department, including the certain aspects disclosed above, (ii) subsequent amendments to or interpretations of the law by the IRS, the U.S. Treasury Department, or the courts, (iii) future laws or regulations rendering certain provisions of the IRA less effective or ineffective, in whole or in part, and/or (iv) changes to U.S. government priorities, policies, and/or initiatives as a result of the new presidential administration and control of the U.S. Congress, could result in changes to the expected and/or actual benefits in the future, which could have a material adverse effect on demand and/or price levels for our solar modules, our net sales, and future expansion plans within the United States, and/or otherwise adversely impact our business, financial condition, and results of operations.

Existing regulations and policies, changes thereto, and new regulations and policies may present technical, regulatory, and economic barriers to the purchase and use of PV solar products, which may significantly reduce demand for our modules.

The market for electricity generation products is heavily influenced by federal, state, local, and foreign government regulations and policies concerning the electric utility industry, as well as policies promulgated by electric utilities. These regulations and policies often relate to electricity pricing and interconnection of customer-owned electricity generation. In the United States and certain other countries, these regulations and policies have been modified in the past and may be modified again in the future, which could deter end-user purchases of PV solar products. For example, without a mandated regulatory exception for PV solar power systems, system owners are often charged interconnection or standby fees for putting distributed power generation on the electric utility grid. To the extent these interconnection standby fees are applicable to PV solar power systems, it is likely that they would increase the cost of such systems, which could make the systems less desirable, thereby adversely affecting our business, financial condition, and results of operations. Another example is the effect of governmental land-use planning policies and environmental policies on utility-scale PV solar development. The adoption of restrictive land-use designations or environmental regulations that proscribe or restrict the siting of utility-scale solar facilities could adversely affect the marginal cost of such development.

Our modules are often subject to oversight and regulation in accordance with national and local ordinances relating to building codes, safety, environmental protection, and other matters, and tracking the requirements of individual jurisdictions is complex. Any new government regulations or utility policies pertaining to our modules may result in significant additional expenses to us or our customers and, as a result, could cause a significant reduction in demand for our products. In addition, any regulatory compliance failure could result in significant management distraction, unplanned costs, and/or reputational damage.

We could be adversely affected by any violations of the FCPA, the U.K. Bribery Act, and other foreign anti-bribery laws.

The FCPA generally prohibits companies and their intermediaries from making improper payments to non-U.S. government officials for the purpose of obtaining or retaining business. Other countries in which we operate also have anti-bribery laws, some of which prohibit improper payments to government and non-government persons and entities, and others (e.g., the FCPA and the U.K. Bribery Act) extend their application to activities outside their country of origin. Our policies mandate compliance with all applicable anti-bribery laws. We currently operate in, and may further expand into, key parts of the world that have experienced governmental corruption to some degree and, in certain circumstances, strict compliance with anti-bribery laws may conflict with local customs and practices. In addition, due to the level of regulation in our industry, our operations in certain jurisdictions where norms can differ from U.S. standards may require substantial government contact, either directly by us or through intermediaries over whom we have less direct control, such as subcontractors, agents, and partners (such as joint venture partners). Although we have implemented policies, procedures, and, in certain cases, contractual arrangements designed to facilitate compliance with these anti-bribery laws, our officers, directors, associates, subcontractors, agents, and partners may take actions in violation of our policies, procedures, contractual arrangements, and anti-bribery laws. Any such violation, even if prohibited by our policies, could subject us and such persons to criminal and/or civil penalties or other sanctions potentially by government prosecutors from more than one country, which could have a material adverse effect on our business, financial condition, cash flows, and reputation.

Environmental obligations and liabilities could have a substantial negative impact on our business, financial condition, and results of operations.

Our operations involve the use, handling, generation, processing, storage, transportation, and disposal of hazardous materials and are subject to extensive environmental laws and regulations at the national, state, local, and international levels. These environmental laws and regulations include those governing the discharge of pollutants into the air and water, the use, management, and disposal of hazardous materials and wastes, the cleanup of contaminated sites, and occupational health and safety. As we expand our business into foreign jurisdictions worldwide, our environmental compliance burden may continue to increase both in terms of magnitude and complexity. We have incurred and may continue to incur significant costs in complying with these laws and regulations. In addition, violations of, or liabilities under, environmental laws or permits may result in restrictions being imposed on our operating activities or in our being subject to substantial fines, penalties, criminal proceedings, third-party property damage or personal injury claims, cleanup costs, or other costs. While we believe we are currently in substantial compliance with applicable environmental requirements, future developments such as more aggressive enforcement policies, the implementation of new, more stringent laws and regulations, or the discovery of presently unknown environmental conditions may require expenditures that could have a material adverse effect on our business, financial condition, and results of operations.

Our solar modules contain CdTe and other semiconductor materials. Elemental cadmium and certain of its compounds are regulated as hazardous materials due to the adverse health effects that may arise from human exposure. Based on existing research, the risks of exposure to CdTe are not believed to be as serious as those relating to exposure to elemental cadmium due to CdTe’s limited bioavailability. In our manufacturing operations, we maintain engineering controls to minimize our associates’ exposure to cadmium compounds and require our associates who handle cadmium compounds to follow certain safety procedures, including the use of personal protective equipment such as respirators, chemical goggles, and protective clothing. Relevant studies and third-party peer reviews of our technology have concluded that the risk of exposure to cadmium or cadmium compounds from our end-products is negligible. In addition, the risk of exposure is further minimized by the encapsulated nature of these materials in our products, the physical properties of cadmium compounds used in our products, and the recycling or responsible disposal of our modules. While we believe that these factors and procedures are sufficient to protect our associates, end users, and the general public from adverse health effects that may arise from cadmium exposure, we cannot ensure that human or environmental exposure to cadmium or cadmium compounds used in our products will not occur. Any such exposure could result in future third-party claims against us, damage to our reputation, and heightened regulatory scrutiny, which could limit or impair our ability to sell and distribute our products. The occurrence of future events such as these could have a material adverse effect on our business, financial condition, and results of operations.

The use of cadmium or cadmium compounds in various products is also coming under increasingly stringent governmental regulation. Future regulation in this area could impact the design, manufacturing, sale, collection, and recycling of solar modules and could require us to make unforeseen environmental expenditures or limit our ability to sell and distribute our products. For example, European Union Directive 2011/65/EU on the Restriction of the Use of Hazardous Substances (“RoHS”) in electrical and electronic equipment (the “RoHS Directive”) restricts the use of certain hazardous substances, including cadmium and its compounds, in all electronic equipment sold into the European market, unless excluded from the law. Currently, PV solar modules are explicitly excluded from the scope of RoHS (Article 2), as adopted in June 2011. Other jurisdictions have adopted similar legislation or are considering doing so. The next revision of the RoHS Directive is expected in 2025. If PV modules were to be included in the scope of future RoHS revisions without an exemption or under similar regulations in other jurisdictions, we would be required to redesign our solar modules to reduce cadmium and other affected hazardous substances to the maximum allowable concentration thresholds in the RoHS Directive or other similar regulation in order to continue to offer them for sale within the EU or such other jurisdiction. As such actions would be impractical, this type of regulatory development would effectively close the affected market to us, which could have a material adverse effect on our business, financial condition, and results of operations.

Our business is subject to evolving corporate governance and public disclosure regulations and expectations, including with respect to environmental, social, and governance matters, that could expose us to numerous risks.

Companies across many industries are facing increasing scrutiny related to their environmental, social and governance (“ESG”) practices. Investor advocacy groups, certain institutional investors, investment funds and other influential investors are also increasingly focused on ESG practices and in recent years have placed increasing importance on the non-financial impacts of their investments. While our vision is to lead the world’s sustainable energy future through solar technology that is eco-efficient and socially responsible, if our ESG practices do not meet investor or other industry stakeholder expectations, which continue to evolve, we may incur additional costs and our brand, business, and ability to attract and retain qualified employees may be harmed.

Furthermore, customer, investor, regulatory, and employee expectations in areas such as ESG have been rapidly evolving and increasing. Specifically, regulatory bodies around the globe continue to develop ESG reporting requirements, many of which will be subject to independent audits. For example, certain government agencies and regulators are considering rules requiring the disclosure of certain ESG matters, and California enacted new environmental disclosure laws in October 2023 that will generally require additional disclosure and reporting by 2026. The new California laws, the Climate Corporate Data Accountability Act, and the Climate-Related Financial Risk Act each impose additional climate-related reporting requirements on large companies conducting business in the state of California. We expect we will be subject to these new laws, which impose extensive reporting obligations about greenhouse gas emissions and climate-related financial risks. We also expect certain of our subsidiaries may be subject to the EU Corporate Sustainability Reporting Directive, which requires companies meeting certain criteria to disclose information about various ESG matters. Our ability to compete and to meet investor or other industry stakeholder expectations also depends on effectively executing on our approach to responsible sourcing and supply chain due diligence. The enhanced stakeholder focus on ESG issues relating to First Solar requires the continuous monitoring of various and evolving standards and the associated reporting requirements. A failure to adequately meet regulatory requirements and stakeholder expectations or achieve our ESG-related goals may result in the loss of business, diluted market valuation, an inability to attract customers, or an inability to attract and retain top talent.

As of the date of this filing, we have made several public commitments regarding our intended reduction of greenhouse gas emissions and operating a responsible supply chain with zero tolerance for forced labor. Although we intend to meet these commitments and deliver on our greenhouse gas emissions reduction and renewable energy targets, we may be required to expend significant resources to do so, which could increase our operational costs. Our ESG initiatives could be unsuccessful for various reasons, including due to our growing manufacturing footprint, the lack of offsite renewable energy options in certain jurisdictions, and violations by our suppliers of applicable laws, regulations, and our Supplier Code of Conduct. Given the dynamic nature of ESG standards, expectations, and regulations, which may change over time, we may from time to time need to update or otherwise revise our current targets, practices, and initiatives, including in response to legislative or legal developments. Any actual or perceived inability to meet these commitments and/or deliver on our targets could result in adverse publicity and reactions from investors, activist groups, and other stakeholders, which could adversely impact the perception of First Solar and our products and services by current and potential customers, as well as investors, which could in turn adversely impact our results of operations.

General Risk Factors

Cybersecurity incidents or information or security breaches, or those of third parties with which we do business, could have a material adverse effect on our business, financial condition, and results of operations.

Our operations rely on our information systems, including hardware, software, and networks, as well as on the information systems of third parties with which we do business (including their upstream and/or downstream service providers, as applicable), to securely process, store, and transmit proprietary, confidential, and other information, including intellectual property and personally identifiable information. We also rely heavily on these information systems to operate our manufacturing lines. These information systems may be compromised by cybersecurity incidents, including those caused by computer viruses, malware, ransomware and other cyber-attacks, as well as other events, including information and security breaches, that could be materially disruptive to our business operations and could put the security of our information, and that of the third parties with which we do business, at risk of misappropriation or destruction. In recent years, such cybersecurity incidents and events have become increasingly frequent and sophisticated, targeting or otherwise affecting a wide range of companies.

Recent developments in the threat landscape include the use of AI and machine learning, as well as an increased number of cyber extortion attacks, with higher financial ransom demand amounts and increasing sophistication and variety of ransomware techniques and methodology. While we have instituted security measures and procured insurance to mitigate the likelihood and impact of a cybersecurity incident and other events, including information and security breaches, there is no assurance that these measures, or those of the third parties with which we do business, will be adequate in the future. If these measures are not adequate, among other impacts, valuable information may be lost; our operations may be disrupted; we may be unable to fulfill our customer obligations; and our reputation may suffer. Additionally, any cybersecurity incident affecting our automated manufacturing lines could adversely affect our ability to produce solar modules or otherwise affect the quality and performance of the modules produced.

We may also be subject to litigation, regulatory sanctions, enforcement actions, government fines, remedial expenses, and financial losses beyond the scope or limits of our insurance coverage. These consequences of a failure of security measures could, individually or in the aggregate, have a material adverse effect on our business, financial condition, and results of operations. While we and the third parties with which we do business have experienced and may continue to experience cybersecurity incidents and other events, including information and security breaches, we have not experienced any material adverse effect on our business, financial condition, or results of operations, or any other material consequences, relating to or as a result of a cybersecurity incident or other such event, whether directed at us or our third parties.

Uncertainty in the development, deployment and use of AI in our products and services, as well as our business more broadly, could adversely affect our business and reputation.

We use systems and tools that incorporate AI-based technologies, including generative AI, for customers and our workforce. As with many new and emerging technologies, AI presents numerous risks and challenges that could adversely affect our business. The development, adoption, integration, and use of generative AI technology remains in early stages, and ineffective or inadequate AI governance, development, use, or deployment practices by us or third parties could result in unintended consequences. For example, AI algorithms that we use may be flawed or may be (or may be perceived to be) based on datasets that are biased or insufficient. In addition, any latency, disruption, or failure in our AI systems or infrastructure could result in delays or errors in our offerings. Inadequate governance, testing, or quality assurance processes could result in flawed deployments, producing erroneous or harmful outputs, which could damage our reputation and lead to legal liabilities. Thoroughly testing generative AI models is challenging due to their complexity and the unpredictability of their outputs. Developing, testing, and deploying resource-intensive AI systems may require additional investment and increase our costs. There also may be real or perceived social harm, unfairness, or other outcomes that undermine public confidence in the deployment and use of AI. Furthermore, third parties may deploy AI technologies in a manner that reduces customer demand for our products and services. Any of the foregoing may result in decreased demand for our products and services or harm to our business, financial condition, results of operations, or reputation.

The legal and regulatory landscape surrounding AI technologies is rapidly evolving and uncertain, including in relation to the areas of intellectual property, cybersecurity, and privacy and data protection. For example, there is uncertainty around the validity and enforceability of intellectual property rights related to our development, deployment, and use of AI. Additionally, third parties that license AI technologies to us may impose unfavorable licensing terms or terminate the licenses altogether which would require us to seek licenses from alternative sources to avoid disruptions in feature delivery. Compliance with new or changing laws, regulations, or industry standards relating to AI may impose significant operational costs and may limit our ability to develop, deploy, or use AI technologies. Failure to appropriately respond to this evolving landscape may result in legal liability, regulatory action, or brand and reputational harm.

Climate-related physical risks, including weather events and natural disasters, may affect our manufacturing operations, supply chains, and customers, which could have a material adverse effect on our business, financial condition, or results of operations.

Climate-related physical impacts of weather events and natural disasters are highly uncertain, unpredictable, and varied by geographic location, including, but not limited to, flooding, hurricanes, wildfires, and tornadoes. Although we carry business interruption insurance coverage and typically have provisions in our contracts that protect us in certain events, our coverage may not be adequate to compensate us for all losses that may occur as a direct or indirect result of weather events or natural disasters.

We have manufacturing operations in regions that have experienced extreme weather such as flooding, hurricanes, wildfires, and tornadoes. In case of these or other weather events or natural disasters, (i) our manufacturing and R&D equipment, on-site IT facilities, and inventory, among other things, may be damaged or destroyed, which may result in significant write-offs or significant expenses to repair or replace certain operations; (ii) the production and shipment of our solar modules may be disrupted as a result of (a) the damage or destruction of our facilities and infrastructure, (b) power outages, (c) delayed or cancelled deliveries of equipment and raw materials, and/or (d) the lack of clear and safe physical access to and from our manufacturing facilities, among other things; and (iii) we may be unable to execute our technology roadmap in a timely manner. We also consider the risks associated with weather events and natural disasters as part of our manufacturing site selection, design, and construction process.

Our suppliers may be adversely affected by weather events and natural disasters, which could disrupt their ability to deliver certain manufacturing equipment, materials, and/or services for extended periods of time. Our suppliers may also incur additional costs to repair or replace their own operations, which may cause them to require higher prices as part of current and future contracts and/or otherwise be unable to perform under their existing contract commitments. For additional information regarding the risks related to the sourcing of our manufacturing equipment and raw materials, respectively, see the Risk Factors entitled, “Some of our manufacturing equipment is customized and sole sourced. If our manufacturing equipment fails or if our equipment suppliers fail to perform under their contracts, we could experience production disruptions and be unable to satisfy our contractual requirements.” and “Several of our key raw materials and components are either single-sourced or sourced from a limited number of suppliers, and their failure to perform could cause manufacturing delays and impair our ability to deliver solar modules to customers in the required quality and quantities and at a price that is profitable to us.” For additional information regarding the risks related to supply chain disruptions, see the Risk Factor entitled, “A disruption in our supply chain for CdTe, tellurium, products containing tellurium, or other key raw materials, or equipment could interrupt or impair our ability to manufacture solar modules and could adversely impact our profitability and long-term growth prospects.”

Our customers may be adversely affected by weather events and natural disasters, which could result in significant site damages, including damages to our solar modules installed at those sites. Damages may adversely impact our customers financially, and related business disruptions may delay or accelerate certain project timelines, which could result in an inability to perform under their contracts or otherwise deliver timely payment to us, if at all. Further, as a result of our own potential operational delays mentioned above, our ability to fulfill customer orders may be impaired or delayed, and we could incur significant losses. For additional information regarding the risks related to our customers, see the Risk Factor entitled, “The loss of any of our large customers, or the inability of our customers and counterparties to perform under their contracts with us, could significantly reduce our net sales and negatively impact our results of operations.”

The severity and duration of public health threats could materially impact our business, financial condition, and results of operations.

The extent to which public health threats (including pandemics such as COVID-19 or similarly infectious diseases) could impact us in the future is highly uncertain and unpredictable, and will depend largely on subsequent developments, including but not limited to (i) the severity and duration of any public health threat, (ii) measures taken to contain the spread of any public health threat, such as restrictions on travel and gatherings of people and temporary closures of or limitations on businesses and other commercial activities, (iii) the timing and nature of policies implemented by governmental authorities, and (iv) any future variants of the public health threat, which may surge over time. As a result of any public health threat and any related containment measures, we, our suppliers, or customers may be subject to significant risks, including to supply chain and business operations, which have the potential to materially and adversely impact our business, financial condition, and results of operations.

If we are unable to attract, train, retain, and successfully integrate key talent into our team, our business may be materially and adversely affected.

Our future success depends, to a significant extent, on our ability to attract, train, and retain management, operations, sales, and technical talent, including associates in foreign jurisdictions. Recruiting and retaining capable individuals, particularly those with expertise in the PV solar and related industries across a variety of technologies, are vital to our success. We are also dependent on the services of our executive officers and other members of our senior management team. The loss of one or more of these key associates could have a material adverse effect on our business. We have a comprehensive succession planning process in place, which contemplates talent at all levels of the organization. However, we may not be able to retain or replace these key associates in a timely manner. Although several of our current key associates, including our executive officers, are subject to employment conditions or arrangements that contain post-employment non-competition provisions, these arrangements permit the associates to terminate their employment with us upon little or no notice. In addition, on April 23, 2024, the U.S. Federal Trade Commission (“U.S. FTC”) issued a final rule that, if enforceable, would ban any non-competition provisions, including provisions in existing employment agreements, which could make it more difficult for us to retain qualified associates. On August 20, 2024, a U.S. district court issued an order stopping the U.S. FTC from enforcing the rule effective September 4, 2024 onward, and the U.S. FTC has appealed this order. However, this order does not prevent the U.S. FTC from addressing non-competition provisions on a case-by-case basis. It is uncertain if the rule will be enforceable or whether the language of the final rule could be further modified.

There is substantial competition for qualified technical and manufacturing personnel, and while we continue to benchmark our organization against a broad spectrum of businesses in our market space to remain economically competitive, there can be no assurances that we will be able to attract and retain technical personnel. As we continue to expand domestically and internationally, we may encounter regional laws that mandate union representation or associates who desire union representation or a collective bargaining agreement. If we are unable to attract and retain qualified associates, or otherwise experience unexpected labor disruptions within our business, we may be materially and adversely affected.

We may be exposed to intellectual property violation claims by third parties, which, if determined adversely to us, could cause us to pay significant damage awards or limit or prohibit the manufacture, use, distribution, export, import, or sale of our solar modules or other technology or know-how.

Our success depends largely on our ability to exploit our technology and know-how without violating the intellectual property rights of third parties. The validity and scope of claims relating to PV solar technology patents involve complex scientific, legal, and factual considerations and analysis and, therefore, may be highly uncertain. We may be subject to legal proceedings involving intellectual property violation claims by third parties. For example, during 2022, we received various indemnification demands from certain customers, for whom we provided engineering, procurement, and construction (“EPC”) services, regarding claims that such customers’ PV tracker systems infringe, in part, on patents owned by Rovshan Sade (“Sade”), the owner of a company called Trabant Solar, Inc. See Note 14. “Commitments and Contingencies – Legal Proceedings” to our consolidated financial statements for more information on our legal proceedings. The defense and prosecution of intellectual property suits, patent opposition proceedings, and other legal and administrative proceedings can be both costly and time consuming and may significantly divert the efforts and resources of our technical and management personnel. An adverse determination in any such legal proceedings to which we may become a party could subject us to significant liability to third parties, require us to seek licenses from third parties, which may not be available on reasonable terms, or at all, or pay ongoing royalties or other payments, require us to redesign our solar modules or other technology, or subject us to injunctions limiting or prohibiting the manufacture, use, distribution, export, import, or sale of our solar modules or other technology or know-how. Legal proceedings could also result in our customers or potential customers deferring or limiting their purchase or use of our solar modules or other technology or know-how until the resolution of such legal proceedings.

Currency translation and transaction risk may negatively affect our results of operations.

Although our reporting currency is the U.S. dollar, we conduct certain business and incur costs in the local currency of most countries in which we operate. As a result, we are subject to currency translation and transaction risk. For example, certain business arrangements outside the United States have involved and may involve significant investments denominated in local currencies. Changes in exchange rates between foreign currencies and the U.S. dollar could affect our results of operations and result in exchange gains or losses. We cannot accurately predict the impact of future exchange rate fluctuations on our results of operations.

We could also expand our business into emerging markets, many of which have an uncertain regulatory environment relating to currency policy. Conducting business in such emerging markets could cause our exposure to changes in exchange rates to increase, due to the relatively high volatility associated with emerging market currencies and potentially longer payment terms for our proceeds.

Our ability to hedge foreign currency exposure is dependent on our credit profile with the banks that are willing and able to do business with us. Deterioration in our credit position or a significant tightening of the credit market conditions could limit our ability to hedge our foreign currency exposures; and therefore, result in exchange gains or losses.

Unanticipated changes in our tax position, the enactment of new tax legislation, or exposure to additional income tax liabilities could affect our profitability.

We are subject to income taxes in the various jurisdictions in which we operate. Accordingly, we are subject to a variety of tax laws and interpretations of such laws by local tax authorities. Longstanding international tax laws that determine each country’s jurisdictional tax rights in cross-border international trade continue to evolve as a result of the base erosion and profit shifting reporting requirements and the introduction of the global minimum tax recommended by the Organisation for Economic Co-operation and Development (“OECD”). For example, the OECD Pillar Two framework introduces a global minimum corporate tax rate of 15% for companies with global revenues above certain thresholds. While it is uncertain whether the U.S. will enact legislation to adopt Pillar Two, certain jurisdictions in which we operate have adopted, and other jurisdictions are in the process of introducing, legislation to implement Pillar Two. As these legislative changes develop and expand, our effective tax rate and tax liabilities may be materially affected. Given the complexities of Pillar Two, we expect to continue to monitor the changes and evaluate their potential impact to our results of operations.

Additionally, in August 2022, the previous U.S. President signed into law the IRA, which revised U.S. tax law by, among other things, including a new corporate alternative minimum tax (the “CAMT”) of 15% on certain large corporations, imposing a 1% excise tax on stock buybacks, and providing various incentives to address climate change, including the introduction of the advanced manufacturing production credit under Section 45X of the IRC. The provisions of the IRA are generally effective for tax years beginning after 2022. Given the complexities of the IRA, we will continue to monitor these developments and evaluate the potential future impact to our results of operations. For further information, see the Risk Factor entitled, “We have received and expect to continue to receive certain financial benefits as a result of tax incentives provided by the Inflation Reduction Act of 2022. If these financial benefits vary significantly from our assumptions, our business, financial condition, and results of operations could be adversely affected.” Changes to these and other tax laws and regulations could have a material adverse impact on our business, financial condition, and results of operations.

We are subject to potential tax examinations in various jurisdictions, and taxing authorities may disagree with our interpretations of U.S. and foreign tax laws and may assess additional taxes. We regularly assess the likely outcomes of these examinations in order to determine the appropriateness of our tax provision; however, the outcome of tax examinations cannot be predicted with certainty. Therefore, the amounts ultimately paid upon resolution of such examinations could be materially different from the amounts previously included in our income tax provision, which could have a material adverse impact on our business, financial condition, and results of operations.

In addition, our future effective tax rate could be adversely affected by changes to our operating structure, losses of tax holidays, changes in the jurisdictional mix of earnings among countries with tax holidays or differing statutory tax rates, changes in the valuation of deferred tax assets and liabilities, changes in tax laws, and the discovery of new information in the course of our tax return preparation process. Any changes in our effective tax rate may have a material adverse impact on our business, financial conditions, and results of operations.

We have been and may be subject to or involved in litigation or threatened litigation, the outcome of which may be difficult to predict, and which may be costly to defend, divert management attention, require us to pay damages, or restrict the operation of our business.

From time to time, we have been and may be subject to disputes and litigation, with and without merit, that may be costly and which may divert the attention of our management and our resources in general, whether or not any dispute actually proceeds to litigation. The results of complex legal proceedings are difficult to predict. Moreover, complaints filed against us may not specify the amount of damages that plaintiffs seek, and we therefore may be unable to estimate the possible range of damages that might be incurred should these lawsuits be resolved against us. Even if we are able to estimate losses related to these actions, the ultimate amount of loss may be materially higher than our estimates. Any resolution of litigation, or threatened litigation, could involve the payment of damages or expenses by us, which may be significant or involve an agreement with terms that restrict the operation of our business. Even if any future lawsuits are not resolved against us, the costs of defending such lawsuits may be significant. These costs may exceed the dollar limits of our insurance policies or may not be covered at all by our insurance policies. Because the price of our common stock has been, and may continue to be, volatile, we can provide no assurance that additional securities or other litigation will not be filed against us in the future. See Note 14. “Commitments and Contingencies – Legal Proceedings” to our consolidated financial statements for more information on our legal proceedings.

Changes in, or any failure to comply with, privacy laws, regulations, and standards may adversely affect our business.

Personal privacy and data security have become significant issues in the jurisdictions in which we operate. The regulatory framework for privacy and security issues worldwide is rapidly evolving and is likely to remain uncertain for the foreseeable future. Furthermore, federal, state, or foreign government bodies or agencies have in the past adopted, and may in the future adopt, laws and regulations affecting data privacy, all of which may be subject to invalidation by relevant foreign judicial bodies. Industry organizations also regularly adopt and advocate for new standards in this area.

In the United States, these include rules and regulations promulgated or pending under the authority of federal agencies, state attorneys general, legislatures, and consumer protection agencies. Internationally, many jurisdictions in which we operate have established their own data security and privacy legal framework with which we, relevant suppliers, and customers must comply. In many jurisdictions, enforcement actions and consequences for noncompliance are also rising. In addition to government regulation, privacy advocates and industry groups may propose new and different self-regulatory standards that either legally or contractually apply to us. Although we have implemented policies, procedures, and, in certain cases, contractual arrangements designed to facilitate compliance with applicable privacy and data security laws and standards, any inability or perceived inability to adequately address privacy and security concerns, even if unfounded, or comply with applicable privacy and data security laws, regulations, and policies, could result in additional fines, costs, and liabilities to us, damage our reputation, inhibit sales, and adversely affect our business.

Our Amended and Restated Bylaws designate a state or federal court located within the State of Delaware as the exclusive forum for substantially all disputes between us and our stockholders, and the federal district courts of the United States as the exclusive forum for the resolution of any complaint asserting a cause of action under the Securities Act of 1933, which could limit our stockholders’ ability to choose the judicial forum for disputes with us or our directors, officers, employees, agents or stockholders.

Our Amended and Restated Bylaws (“Bylaws”) provide that, unless we consent in writing to the selection of an alternative forum, the Court of Chancery of the State of Delaware (or, if the Court of Chancery of the State of Delaware lacks subject matter jurisdiction, the federal district court for the District of Delaware) is the sole and exclusive forum for (i) any derivative action or proceeding brought on our behalf, (ii) any action or proceeding asserting a claim of breach of a fiduciary duty owed by any of our directors, officers, other employees, agents or stockholders to us or our stockholders, (iii) any action or proceeding against us or any of our directors, officers, other employees, agents or stockholders arising pursuant to any provision of the Delaware General Corporation Law (“DGCL”), our Amended and Restated Certificate of Incorporation or our Bylaws, (iv) any action or proceeding against us or any of our directors, officers or other employees asserting a claim that is governed by the internal affairs doctrine, or (v) any action or proceeding asserting an “internal corporate claim,” as defined in the DGCL. Our Bylaws also provide that, unless we consent in writing to the selection of an alternative forum, the federal district courts of the United States are the exclusive forum for resolving any complaint asserting a cause of action under the

Securities Act. Nothing in our Bylaws precludes stockholders that assert claims under the Exchange Act from bringing such claims in any court, subject to applicable law.

Any person or entity holding, owning or otherwise acquiring any interest in any of our securities shall be deemed to have notice of and consented to these provisions. These exclusive forum provisions may limit a stockholder’s ability to bring a claim in a judicial forum of its choosing for disputes with us or our directors, officers, other employees, agents or stockholders, which may discourage lawsuits against us and our directors, officers, other employees, agents or stockholders. The enforceability of similar choice of forum provisions in other companies’ governing documents has been challenged in legal proceedings, and it is possible that a court could find these types of provisions to be inapplicable or unenforceable. For example, in December 2018, the Court of Chancery of the State of Delaware determined that a provision stating that federal district courts of the United States are the exclusive forum for resolving any complaint asserting a cause of action arising under the Securities Act is not enforceable. Although this decision was reversed by the Delaware Supreme Court in March 2020, courts in other states may still find these provisions to be inapplicable or unenforceable. If a court were to find the exclusive forum provisions in our Bylaws to be inapplicable or unenforceable in an action, we may incur additional costs associated with resolving the dispute in other jurisdictions, which could adversely affect our results of operations.

Cybersecurity

As filed, 7,428 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

First Solar maintains a cyber risk management program designed to identify, assess, and manage cybersecurity risks. The underlying controls of the cyber risk management program incorporate recognized best practices and standards for cybersecurity, including guidance from the National Institute of Standards and Technology (“NIST”) cybersecurity framework. Our cyber risk management program includes various risk assessments that are completed on a regular basis, including (i) information security controls assessments with internal and external audit partners, (ii) architectural and technical assessments with third-party experts, (iii) internal and external penetration testing with third-party service providers, (iv) continuous cyber risk register reviews, and (v) risk prioritization with our executive officers. The identification of cybersecurity risks is aided by a technical toolset as well as threat hunting and counterintelligence services provided by third-party service providers. These risk assessments and the technical toolset inform our information security roadmap, which allocates resources toward strategic initiatives to mitigate, transfer, and/or reduce cybersecurity risks. Our associates receive cybersecurity awareness communications, engage in annual cybersecurity training, and are exposed to periodic phishing simulation exercises with targeted training. Additionally, confidential information protection training is regularly provided to associates who have access to personally identifiable information, reside in certain jurisdictions, or have privileged access.

Third-party risk management at First Solar includes screening processes to evaluate the information security programs and capabilities of our vendors, including periodic reviews of vendor control assessments, such as System and Organization Controls (“SOC”) 2 Type 2 reports, which are supplemented by end-user controls performed by First Solar associates. These processes enable us to oversee and identify potentially material risks from cybersecurity threats associated with our use of third-party service providers.

The Head of Information Security oversees the Information Security team, which assesses and manages cybersecurity risks at First Solar as part of our information security program. The Head of Information Security and our Information Security team members collectively hold certifications in cyber-risk oversight from the National Association of Corporate Directors, Certified Systems Security Officer and Certified Information Systems Manager credentials, and Certified Information Systems Security Professional and Systems Security Certified Practitioner credentials. The Head of Information Security, who has over 20 years of information technology experience, including over 10 years in leadership roles at First Solar, reports to the Chief Information Officer and regularly briefs the Chief Financial Officer and, at least quarterly, briefs the audit committee of the board of directors on cybersecurity matters. Effective March 16, 2025, our Head of Information Security will be departing the Company and, as a result, our Chief Information Officer will act as our interim Head of Information Security while we conduct a search for a permanent replacement. Our Chief Information Officer has 25 years of information technology experience, including 18 years in leadership roles at First Solar.

The cybersecurity risks identified as part of our information security program are integrated into our enterprise risk management program. The audit committee reviews the integration of our cybersecurity controls and procedures with our overall risk management systems and processes, and reviews and discusses with management First Solar’s major information security risks (including cybersecurity) and the steps management has taken to monitor, control, and limit such exposures and risks. An Information Security Steering Committee, which is comprised of senior management from various departments, serves in an advisory capacity regarding the implementation, support, and management of the information security program and compliance with applicable state and federal laws and regulations. This committee aligns business initiatives, material digital risks, risk tolerance levels, and security requirements with the information security roadmap.

The Information Security team actively manages cybersecurity threats and incidents through comprehensive technical tooling, reporting, partnerships, and processes. Intrusion prevention, detection, and response systems, access management systems, and incident and vulnerability management systems are all examples of technical tools employed by First Solar’s Information Security team to protect our information technology environment. Our incident response plan includes specific criteria for determining the potential impact of an identified cybersecurity incident and defined escalation protocols to determine which internal and external stakeholders should be involved and the appropriate communication channels, including considerations of any reporting based on regulatory requirements. Further, at least annually, certain key members from our Information Security team engage in cybersecurity tabletop exercises alongside certain members of both our executive team and board of directors, which are designed to simulate a cybersecurity threat or incident to test First Solar’s incident response plan. Cybersecurity incidents are evaluated on a case-by-case basis and are categorized as low, moderate, or high impact incidents depending on qualitative and quantitative factors, including, but not limited to, their operational impact, degree of compromise, legal or regulatory impacts, and data disclosure impacts. The audit committee of the board of directors is notified if a potentially material incident is identified and reviews our response to material cybersecurity incidents, including disclosure considerations and the engagement of forensic and other technology experts to ascertain the extent of the incident, remediation actions, and responsive measures to prevent or mitigate future incidents.

As a result of ongoing monitoring, we have not identified any risks from cybersecurity threats, including as a result of previous cybersecurity incidents, that have materially affected or are reasonably likely to materially affect the Company, including its business strategy, financial condition, or results of operations during the period covered by this filing. Notwithstanding the cybersecurity processes and procedures described above, we may not be successful in preventing or mitigating a cybersecurity incident that could have a material adverse effect on our business, financial condition, or results of operations. While we maintain cybersecurity insurance, the costs related to cybersecurity incidents, including information and security breaches, or other disruptions may not be fully insured. For further information regarding the risks to us associated with cybersecurity incidents and other events, including information and security breaches, and how such risks may affect the Company, see the Risk Factor entitled, “Cybersecurity incidents or information or security breaches, or those of third parties with which we do business, could have a material adverse effect on our business, financial condition, and results of operations.”

Properties

As filed, 939 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

As of December 31, 2024, our principal properties, which pertain to our modules business, consisted of the following:

Nature Location Held
Corporate headquarters Tempe, Arizona, United States Lease
R&D facility Santa Clara, California, United States Lease
Manufacturing plants, R&D facilities, and administrative offices Perrysburg and Lake Township, Ohio, United States Own
Manufacturing plants Kulim, Kedah, Malaysia Lease land, own buildings
Manufacturing plants Ho Chi Minh City, Vietnam Lease land, own buildings
Manufacturing plant Tamil Nadu, India Lease land, own buildings
Manufacturing plant Trinity, Alabama, United States Own
Manufacturing plant (1) Iberia Parish, Louisiana, United States Lease land, own buildings

(1) Manufacturing plant currently under construction; operations are expected to commence in the second half of 2025.

As filed, 170 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

See Note 14. “Commitments and Contingencies – Legal Proceedings” to our consolidated financial statements for information regarding legal proceedings and related matters.

Management's discussion and analysis

As filed, 79,135 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

The following discussion and analysis of our financial condition and results of operations should be read in conjunction with our consolidated financial statements and the related notes thereto included in this Annual Report on Form 10-K. In addition to historical financial information, the following discussion and analysis contains forward-looking statements that involve risks, uncertainties, and assumptions as described under the “Note Regarding Forward-Looking Statements” that appears earlier in this Annual Report on Form 10-K. Our actual results could differ materially from those anticipated by these forward-looking statements as a result of many factors, including those discussed under Item 1A. “Risk Factors,” and elsewhere in this Annual Report on Form 10-K. This discussion and analysis does not address certain items in respect of the year ended December 31, 2022. See Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in our Annual Report on Form 10-K for the year ended December 31, 2023 for comparative discussions of our results of operations and liquidity and capital resources for the years ended December 31, 2023 and 2022.

Executive Overview

We are America’s leading PV solar technology and manufacturing company. The only U.S.-headquartered company among the world’s largest solar manufacturers, First Solar is focused on competitively and reliably enabling power generation needs with our advanced, thin film PV technology. Developed at R&D labs in California and Ohio, the Company’s technology represents the next generation of solar power generation, providing a competitive, high-performance, and responsibly produced alternative to conventional crystalline silicon PV solar modules. Our PV solar modules are produced using a fully integrated, continuous process that does not rely on Chinese crystalline silicon supply chains.

We are the world’s largest thin film PV solar module manufacturer and the largest PV solar module manufacturer in the Western Hemisphere. We recently commenced operations at our fourth manufacturing facility in the United States and are in the process of expanding our manufacturing capacity, including the construction of our fifth manufacturing facility in the United States, which is expected to commence operations in the second half of 2025. With a global footprint that spans the United States, India, Malaysia, and Vietnam, we expect to have an annual manufacturing capacity of over 25 GW by 2026.

Certain of our financial results and other key operational developments for the year ended December 31, 2024 include the following:

  • Net sales for 2024 increased by 27% to $4.2 billion compared to $3.3 billion in 2023. The increase in net sales was primarily driven by an increase in the volume of modules sold to third parties and an increase in termination payments associated with certain customer contract terminations in the U.S., India, and Europe, partially offset by a reduction in revenue related to manufacturing issues affecting certain Series 7 modules manufactured in 2023 and 2024. We currently believe the primary causes of the issues have been identified and we have taken actions to address such issues.
  • Gross profit as a percentage of net sales increased 5.0 percentage points to 44.2% in 2024 from 39.2% in 2023. The increase was primarily driven by a higher sales mix of modules qualifying for the advanced manufacturing production credit under Section 45X of the IRC, termination payments associated with certain customer contract terminations in the U.S., India, and Europe, and an increase in the volume of modules sold to third parties, partially offset by higher module storage costs and a reduction in revenue related to manufacturing issues affecting certain Series 7 modules manufactured in 2023 and 2024.
  • During 2024, we commenced production of Series 7 modules at our first manufacturing facility in Alabama, bringing our total installed nameplate production capacity across all our facilities to approximately 21 GW. During 2024, we produced 15.5 GW and sold 14.1 GW of solar modules. During 2025, we expect to produce between 18 GW and 19 GW and sell between 18 GW and 20 GW.
  • In May 2024, we achieved a new world record CdTe research cell conversion efficiency of 23.1%, which was certified by the U.S. Department of Energy’s National Renewable Energy Laboratory.
  • In July 2024, our dedicated R&D innovation center in Ohio was formally commissioned. This R&D facility features a high-volume manufacturing scale production pilot line, which is expected to enable the production of full-sized prototypes of thin film and tandem PV modules, supporting the implementation of our technology roadmap.
  • In December 2024, we entered into two agreements with Visa Inc. (“Visa”) for the sale of $857.2 million of Section 45X tax credits we generated during 2024 for aggregate cash proceeds of $818.6 million and received initial cash proceeds of $616.0 million. We expect to receive the remaining cash proceeds during the first quarter of 2025.

Market Overview

Solar energy is one of the fastest growing forms of renewable energy with numerous benefits, including economic and speed of deployment, that make it an attractive complement to or substitute for traditional forms of energy generation. In recent years, the cost of producing electricity from PV solar power systems has decreased to levels that are competitive with or below the wholesale price of electricity in many markets. Other technological developments in the renewable energy industry, such as the advancement of energy storage capabilities, have further enhanced the prospects of solar energy as an alternative to traditional forms of energy generation. As a result of these and other factors, worldwide solar markets continue to develop and expand. Government incentive programs, such as the IRA discussed previously, have contributed to this momentum by providing solar module manufacturers, project developers, and project owners with various incentives to accelerate the deployment of solar power generation. For more information about these incentive programs, see Item 1. “Business – Incentive Programs.”

Supply and Demand. As a result of the market opportunities described above, we recently commenced production of Series 7 modules at our first manufacturing facility in Alabama and are in the process of expanding our manufacturing capacity, including the construction of our fifth U.S. manufacturing facility, which is expected to commence operations in the second half of 2025. We continue to evaluate opportunities for future expansion worldwide. We believe manufacturers of solar cells and modules, particularly those in China, have significant installed production capacity, relative to global demand, and the ability for additional capacity expansion. Accordingly, we believe the solar industry may experience periods of structural imbalance between supply and demand, which could lead to periods of pricing volatility. Further, demand for solar energy in key markets, such as the United States and India, may be affected by the nature and extent of commitments to the renewable energy transition at the local and global levels. For example, certain large oil and gas and energy companies have experienced investor pressure to pursue returns commensurate with those currently associated with fossil fuel projects, where returns have become easier as fossil fuel prices have rebounded since the COVID-19 pandemic. Notwithstanding these considerations, utility and corporate demand for clean energy, and overall electric load growth, especially as a result of AI-driven data center demand, continue to increase. Internationally, given the combination of (i) a European Union market captured by Chinese solar modules, which pricing is at levels near or below manufacturing costs, (ii) an India market effectively closed to Southeast Asian finished goods, (iii) the uncertain U.S. policy environment following the 2024 U.S. elections, and (iv) a supply and demand imbalance for Southeast Asian product, we have decided to reduce production output of our Series 6 modules at our manufacturing facilities in Malaysia and Vietnam by a combined total of 1 GW in 2025. In light of such market realities, we continue to advocate for industrial and trade policies that provide a level playing field for domestic manufacturers of solar cells and modules. We also continue to focus on our strategies and points of differentiation, which include our advanced module technology, our manufacturing process and distributed manufacturing presence, our R&D capabilities, our commitment to responsible solar, and our financial stability.

Pricing Competition. The solar industry has been characterized by intense pricing competition, both at the module and system levels. This competition may result in an environment in which pricing falls rapidly, which could potentially increase demand for solar energy solutions but constrain the ability for module manufacturers and project developers to sustain meaningful and consistent profitability. Our results of operations could be adversely affected if competitors reduce pricing below their costs, bid aggressively low prices for module sale agreements, or are able to operate at minimal or negative operating margins for sustained periods of time. For certain of our competitors, including many in China, these practices may be enabled by their direct or indirect access to sovereign capital or other forms of state support. Although module average selling prices in many global markets continue to decline, recent module pricing in the United States, our primary market, has been relatively stable due, in part, to the demand for domestically manufactured modules as a result of the IRA.

Diverse Offerings. We face intense competition from manufacturers of crystalline silicon solar modules and other emerging technologies. Solar module manufacturers compete with one another on sales price per watt, which may be influenced by several module value attributes, including energy yield, wattage (through a larger form factor or an improved conversion efficiency), degradation, sustainability, and reliability. Sales price per watt may also be influenced by warranty terms, customer payment terms, and/or module content attributes. We believe that utility-scale solar will continue to be a compelling offering and will continue to represent an increasing portion of the overall electricity generation mix. However, this focus on utility-scale module offerings exists within a current market environment that includes rooftop and distributed generation solar, which may influence our future offerings.

We continue to devote significant resources to support the implementation of our technology roadmap and improve the energy output of our modules. In the course of our R&D activities, we explore various technologies in our efforts to sustain competitive differentiation of our modules. Such technologies include the development of bifacial modules, the implementation of our CuRe program, and ongoing research and development of multi-junction solar modules.

  • Bifacial. While conventional solar modules are monofacial, meaning their ability to produce energy is a function of direct and diffuse irradiance on their front side, most module manufacturers offer bifacial modules that also capture diffuse irradiance on the back side of a module. Bifaciality compromises nameplate efficiency, but by converting both front and rear side irradiance, such technology may improve the overall energy production of a module relative to nameplate efficiency when applied in certain applications, which could lower the overall LCOE of a system when compared to systems using monofacial solar modules. We recently began commercial production of bifacial solar modules at certain of our manufacturing facilities and delivered our first bifacial modules to customers. Our bifacial module features an innovative transparent back contact which, in addition to converting both front and rear side irradiance, allows infrared light to pass through rather than be absorbed as heat. This design lowers the operational temperature of the module, resulting in a higher energy yield.
  • CuRe. Our CuRe program is intended to improve our current semiconductor structure by replacing copper with certain other elements that are expected to enhance module performance by improving its bifaciality characteristics, improving its temperature coefficient, and improving its warranted degradation. As a result of these performance improvements, our PV solar modules are expected to produce more energy in real-

world operating conditions over their estimated useful lives than crystalline silicon modules with the same nameplate capacity. In May 2024, we achieved a new world record CdTe research cell conversion efficiency of 23.1%, which was based on our CuRe program and certified by the U.S. Department of Energy’s National Renewable Energy Laboratory. We commenced a limited commercial production run of modules employing our CuRe technology in late 2024 and intend to begin a phased replication of the technology across our fleet in the first quarter of 2026.

  • Multi-junction. We continue to evaluate opportunities to develop and leverage other solar cell technologies in multi-junction applications that combine our thin film PV technology with another high efficiency PV semiconductor, with each layer optimized for a different range of the solar spectrum. We believe such applications, which are expected to utilize at least one thin-film semiconductor, have the potential to significantly increase the efficiency of PV modules beyond the limits of traditional single-junction devices. Our acquisition of Evolar is expected to accelerate the development of high efficiency multi-junction devices by integrating Evolar’s expertise with First Solar’s existing R&D capabilities.

Product Efficiencies. The efficiencies gained from the vertical integration of our manufacturing model and our cost management initiatives allow us to compete favorably in markets where pricing for modules and systems is highly competitive. Our cost competitiveness is based in large part on our advanced thin film semiconductor technology, module wattage, proprietary manufacturing process (which enables us to produce a CdTe module in a matter of hours using a continuous and highly automated industrial manufacturing process, as opposed to a batch process), and focus on operational excellence. In addition, our CdTe modules use approximately 2% to 3% of the amount of semiconductor material that is used to manufacture conventional crystalline silicon solar modules. The cost of polysilicon is a significant driver of the manufacturing cost of crystalline silicon solar modules, and the timing and rate of change in the cost of silicon feedstock and polysilicon could lead to changes in solar module pricing levels.

Energy Performance. In many climates our solar modules provide certain energy production advantages relative to competing crystalline silicon solar modules. As a result, our solar modules can produce more annual energy in real-world operating conditions than conventional crystalline silicon modules with the same nameplate capacity. For more information about these advantages, see Item 1. “Business – Business Strategy.” Additionally, we warrant that our solar modules will produce at least 98% of their labeled power output rating during the first year, with the warranty coverage reducing by a degradation factor that is generally between 0.3% and 0.5%, depending on the module series, every year thereafter throughout the limited power output warranty period of up to 30 years.

While our modules are generally competitive in cost, reliability, and performance attributes, there can be no guarantee such competitiveness will continue to exist in the future to the same extent or at all. Any declines in the competitiveness of our products could result in further declines in the average selling prices of our modules and additional margin compression. Accordingly, we continue to focus on enhancing the competitiveness of our solar modules through our module technology and cost reduction roadmaps.

Certain Trends and Uncertainties

We believe that our business, financial condition, and results of operations may be favorably or unfavorably impacted by the following trends and uncertainties. See Item 1A. “Risk Factors” and elsewhere in this Annual Report on Form 10-K for discussions of other risks that may affect us.

Our business is evolving worldwide and is shaped by the varying ways in which our offerings can be compelling and economically viable solutions to energy needs in various markets. In addressing electricity demands, we are focused on providing utility-scale module offerings in key geographic markets that we believe have a significant need for mass-scale PV solar electricity, including markets throughout the United States and India. We closely evaluate and monitor the appropriate level of resources required to support such markets and their associated sales opportunities. When deployed in utility-scale applications, our modules provide energy at a lower LCOE compared to traditional forms of energy generation, making them an attractive alternative to or replacement for aging fossil fuel-based generation resources. Accordingly, future retirements of aging energy generation resources represent a significant increase in the potential market for solar energy.

Demand for our PV solar module offerings depends, in part, on market factors outside our control. For example, many governments have proposed or enacted policies or incentive programs intended to encourage renewable energy investments to achieve decarbonization objectives and/or establish greater energy independence. While we compete in markets that do not require solar-specific government subsidies or incentive programs, our net sales and profits remain subject to variability based on the availability and size of government subsidies and economic incentives. Adverse changes in these factors could increase the cost of utility-scale systems, which could reduce demand for our solar modules. Recent developments to government incentive programs include the following:

  • United States. In August 2022, the previous U.S. President signed the IRA into law, which was intended to accelerate the country’s energy transition. Among other things, the financial incentives provided by the IRA have significantly increased demand for modules manufactured in the United States. Accordingly, the demand for these solar modules is expected to increase domestic manufacturing in the near term, which may result in localized supply chain constraints and periods of inflationary pricing for certain of our key raw materials. The financial incentives provided by the IRA have also increased demand for solar modules in general due to the incremental tax credit available for the qualified production of clean hydrogen that is powered by renewable resources. Given the complexities of the IRA, we continue to evaluate the extent of benefits available to us, which we expect will favorably impact our results of operations in future periods. For example, we currently expect to qualify for the advanced manufacturing production credit under Section 45X of the IRC, which provides certain specified benefits for solar modules and solar module components manufactured in the United States and sold to third parties. See Note 9. “Government Grants” and Note 18. “Income Taxes” to our consolidated financial statements for discussion of our expectation of the financial benefits available to us under the IRA and developments to technical guidance and regulations, respectively. Also, the new presidential administration and control of the U.S. Congress present uncertainty as to the continued availability of such benefits. For example, on January 20, 2025, the U.S. President issued the executive order entitled, “Unleashing American Energy,” which, among other things, indicated a lack of support for federal funding of certain solar and solar-related projects. For more information about certain risks associated with the benefits available to us under the IRA, see Item 1A. “Risk Factors – We have received and expect to continue to receive certain financial benefits as a result of tax incentives provided by the Inflation Reduction Act of 2022. If these financial benefits vary significantly from our assumptions, our business, financial condition, and results of operations could be adversely affected.”
  • India. In March 2023, the government of India allocated financial incentives under the PLI scheme to certain PV module manufacturers, including First Solar. The PLI scheme is expected to provide aggregate funding of INR 185 billion ($2.2 billion), of which INR 11.8 billion ($138 million) was allocated to First Solar, to promote the manufacturing of high efficiency solar modules in India and to reduce India’s dependency on foreign imports of solar modules. Under the PLI scheme, manufacturers were selected through a competitive bid process and may be entitled to receive certain cash incentives over a five-year period following the commissioning of their manufacturing facilities. Among other things, such incentives are subject to attaining certain minimum thresholds for module efficiency and temperature coefficient and require that a certain proportion of raw materials be sourced from the domestic market. Such conditions will be evaluated on a quarterly basis from 2026 through 2031. At this time, it is uncertain to what extent we may qualify for such incentives.

Demand for our solar energy solutions also depends on domestic or international trade policies and government regulations, which may be proposed, revised, and/or enacted across short- and long-term time horizons with varying degrees of impact to our net sales, profit, and manufacturing operations. Changes in these policies and regulations could adversely impact the competitive landscape of solar markets, which could reduce demand for our solar modules. Recent revisions or proposed changes to trade policy and government regulations include the following:

  • China. In early February 2025, China announced that it would tighten export controls for five key minerals, including products containing tellurium; tellurium is one of the main components of our CdTe module production process. Although tellurium and products containing tellurium are sourced globally, China is a major global producer of tellurium and products containing tellurium. Exporters of tellurium and related products may be required to obtain a license from the Chinese Ministry of Commerce. Since these export controls came into effect, we have assembled a cross-functional team to interpret the export controls, analyze how they may impact First Solar’s module production process. We have and intend to continue applying for export licenses where appropriate, as well as continuing to implement other strategic alternatives such as leveraging our alternative suppliers to mitigate potential adverse impacts from these export controls. For more information about this development, see Item 1A. “Risk Factors – A disruption in our supply chain for CdTe, tellurium, products containing tellurium, or other key raw materials, or equipment could interrupt or impair our ability to manufacture solar modules and could adversely impact our profitability and long-term growth prospects.”
  • United States. In April 2024, the American Alliance for Solar Manufacturing Trade Committee, which includes First Solar, filed a set of AD/CVD petitions with the USDOC and the USITC to impose duties on certain unfairly traded solar products from Cambodia, Malaysia, Thailand, and Vietnam. For more information about this development, see Item 1A. “Risk Factors – The modification, reduction, elimination, or expiration of government subsidies, economic incentives, tax incentives, renewable energy targets, and other support for on-grid solar electricity applications, or the impact of other public policies, such as tariffs or other trade remedies imposed on solar cells and modules or related raw materials or equipment, could negatively impact demand and/or price levels for our solar modules and limit our growth or lead to a reduction in our net sales or increase our costs, thereby adversely impacting our operating results.”
  • United States. In October 2023, a coalition of U.S. aluminum extruders and a labor union filed AD/CVD petitions with the USDOC and the USITC related to aluminum extrusions from 15 countries. We import certain items that are within the scope of the investigations. The USDOC issued preliminary and final antidumping determinations in May and September 2024, respectively, both of which found that our Malaysian supplier of aluminum extrusions was not dumping. For more information about this development, see Item 1A. “Risk Factors – The modification, reduction, elimination, or expiration of government subsidies, economic incentives, tax incentives, renewable energy targets, and other support for on-grid solar electricity applications, or the impact of other public policies, such as tariffs or other trade remedies imposed on solar cells and modules or related raw materials or equipment, could negatively impact demand and/or price levels for our solar modules and limit our growth or lead to a reduction in our net sales or increase our costs, thereby adversely impacting our operating results.”
  • India. The ALMM was introduced in 2021 as a non-tariff barrier to incentivize domestic manufacturing of PV modules by approving the list of models and manufacturers who can participate in certain solar development projects. The ALMM is approved by the MNRE, and any modifications to the ALMM and its application may affect future investments in solar module manufacturing in India. For example, in December 2024, the ALMM was amended to require nearly all solar development projects to use PV modules that contain domestically manufactured solar cells, which is expected to be effective for such projects completed on or after June 2026. For more information about the ALMM, see Item 1A. “Risk Factors – The modification, reduction, elimination, or expiration of government subsidies, economic incentives, tax incentives, renewable energy targets, and other support for on-grid solar electricity applications, or the impact of other public policies, such as tariffs or other trade remedies imposed on solar

cells and modules or related raw materials or equipment, could negatively impact demand and/or price levels for our solar modules and limit our growth or lead to a reduction in our net sales or increase our costs, thereby adversely impacting our operating results.”

Our ability to provide solar modules on economically attractive terms is also affected by the availability and cost of logistics services associated with the procurement of raw materials or equipment used in our manufacturing process and the shipping, handling, storage, and distribution of our modules. To mitigate certain logistics costs, we employ commercial contract structures that provide additional consideration to us if the cost of logistics services, excluding demurrage and detention, exceeds defined thresholds. We may also adjust our shipping plans to include additional lead times for module deliveries and/or utilize our network of U.S. distribution centers to mitigate logistics costs. Additionally, our manufacturing capacity expansions are expected to bring production activities closer to customer demand, further mitigating our exposure to the cost of ocean freight.

We generally price and sell our solar modules on a per watt basis. As of December 31, 2024, we had entered into contracts with customers for the future sale of 68.5 GW of solar modules for an aggregate transaction price of $20.5 billion, which we expect to recognize as revenue through 2030 as we transfer control of the modules to our customers. This volume and transaction price exclude contracts with customers in India for which payment has not been fully secured. This volume includes contracts for the sale of 37.1 GW of solar modules with anticipated price adjustments for future module technology improvements, including enhancements to certain energy related attributes. Based on these potential improvements, the contracted module volume as of December 31, 2024, the expected timing of such improvements being incorporated into our manufacturing process, and the expected timing of module deliveries, such adjustments, if realized, could result in additional revenue of up to $0.7 billion, the majority of which would be recognized between 2026 and 2028. In addition to these price adjustments, certain of our contracts with customers may include favorable price adjustments associated with sales freight in excess of defined thresholds and/or favorable or unfavorable price adjustments associated with changes to (i) certain commodity prices, (ii) the module wattage committed for delivery, and (iii) the volume of modules sold that meet certain U.S. domestic content requirements. As a result, the revenue recognized from such contracts may increase or decrease in future periods relative to the original transaction price.

We monitor our modules’ expected performance through quality and reliability testing, as well as actual performance in certain field installation sites. Any declines in the expected performance attributes of our modules could adversely impact our financial results due to declines in the average selling prices of our modules and additional margin compression. For example, the recently identified manufacturing issues affecting certain Series 7 modules may adversely impact the average selling prices of our modules or the carrying value of our inventories. These manufacturing issues may also increase product warranty claims by our customers to resolve the premature power loss in affected modules. The remediation of any identified issues in our manufacturing process may result in increased costs as we resolve the identified issues. Any future manufacturing issues, including any additional commitment made by us to remediate the affected modules beyond our limited warranty, could also adversely impact our reputation, financial position, operating results, and cash flows. We may also be subject to certain other risks and uncertainties surrounding module performance as described in Item 1A. “Risk Factors – Problems with product quality or performance may cause us to incur significant and/or unexpected contractual damages and/or warranty and related expenses, damage our market reputation, and prevent us from maintaining or increasing our market share.”

We continue to increase the nameplate production capacity of our existing manufacturing facilities by improving our production throughput, increasing module wattage, and reducing manufacturing yield losses. Additionally, we are in the process of expanding our manufacturing capacity by approximately 4 GW, including the construction of our fifth manufacturing facility in the United States, as well as capacity expansion at our existing facilities. This additional capacity, and any other potential investments to add to or otherwise modify our existing manufacturing capacity in response to market demand and competition, may require significant internal and possibly external sources of capital, and may be subject to certain risks and uncertainties described in Item 1A. “Risk Factors,” including those described under the headings “Our future success depends on our ability to effectively balance manufacturing production with market demand, effectively manage our cost per watt, and, when necessary, continue to build new manufacturing plants over time in response to market demand, all of which are subject to risks and uncertainties” and “If any future production lines are not built in line with committed schedules, it may adversely affect our future growth plans. If any future production lines do not achieve operating metrics similar to our existing production lines, our solar modules could perform below expectations and cause us to lose customers.”

Results of Operations

The following table sets forth our consolidated statements of operations as a percentage of net sales for the years ended December 31, 2024, 2023, and 2022:

Years Ended December 31, 2024 2023 2022
Net sales 100.0% 100.0% 100.0%
Cost of sales 55.8% 60.8% 97.3%
Gross profit 44.2% 39.2% 2.7%
Selling, general and administrative 4.5% 6.0% 6.3%
Research and development 4.5% 4.6% 4.3%
Production start-up 2.0% 2.0% 2.8%
Litigation loss —% 1.1% —%
Gain on sales of businesses, net —% 0.2% 9.7%
Operating income (loss) 33.2% 25.8% (1.0)%
Foreign currency loss, net (0.6)% (0.6)% (0.6)%
Interest income 2.1% 2.9% 1.3%
Interest expense, net (0.9)% (0.4)% (0.5)%
Other (expense) income, net (0.3)% (0.9)% 1.2%
Income tax expense (2.7)% (1.8)% (2.0)%
Net income (loss) 30.7% 25.0% (1.7)%

Segment Overview

Our primary segment is our modules business, which involves the design, manufacture, and sale of CdTe solar modules, which convert sunlight into electricity. Third-party customers of our modules segment include system developers, independent power producers, utilities, commercial and industrial companies, and other system owners and operators. Our residual business operations include certain project development activities, operations and maintenance (“O&M”) services, the results of operations from PV solar power systems we owned and operated in certain international regions, and the sale of such systems to third-party customers.

Net sales

We generally price and sell our solar modules on a per watt basis. During 2024, no customer accounted for 10% or more of our modules business net sales, and the majority of our solar modules were sold to developers and operators of systems in the United States. Substantially all of our modules business net sales during 2024 were denominated in U.S. dollars. We recognize revenue for module sales at a point in time following the transfer of control of the modules to the customer, which typically occurs upon delivery of the modules to the location specified in the terms of the underlying contract. The revenue recognition policies for module sales are further described in Note 2. “Summary of Significant Accounting Policies” to our consolidated financial statements. Net sales from our residual business operations primarily consist of revenue recognized for sales of development projects or completed systems, including any modules installed in such systems and any revenue from energy generated by such systems. In certain prior periods, our residual business operations also included O&M services we provided to third parties.

The following table shows net sales by reportable segment for the years ended December 31, 2024, 2023, and 2022:

(Dollars in thousands)

Years Ended 2024 2023 2022 Change 2024 over 2023 2023 over 2022
Modules $4,202,733 $3,296,809 $2,428,278 $905,924 27% $868,531 36%
Other 3,556 21,793 191,041 (18,237) (84)% (169,248) (89)%
Net sales $4,206,289 $3,318,602 $2,619,319 $887,687 27% $699,283 27%

Net sales from our modules segment increased by $905.9 million in 2024 primarily due to a 24% increase in the volume of modules sold to third parties and an increase in termination payments of $115.0 million associated with certain customer contract terminations in the U.S., India, and Europe, partially offset by a reduction in revenue of $56.0 million related to manufacturing issues affecting certain Series 7 modules manufactured in 2023 and 2024. Net sales from our residual business operations decreased by $18.2 million in 2024 as our residual business operations continue to wind down.

Cost of sales

Our modules business cost of sales includes the cost of raw materials and components for manufacturing solar modules, such as glass, transparent conductive coatings, CdTe and other thin film semiconductors, laminate materials, connector assemblies, edge seal materials, and frames or back rails. In addition, our cost of sales includes direct labor for the manufacturing of solar modules and manufacturing overhead, such as engineering, equipment maintenance, quality and production control, and information technology. Our cost of sales also includes depreciation of manufacturing plant and equipment, facility-related expenses, environmental health and safety costs, and costs associated with shipping, warranties, and solar module collection and recycling (excluding accretion). Cost of sales for our residual business operations includes project-related costs, such as development costs (legal, consulting, transmission upgrade, interconnection, permitting, and other similar costs), EPC costs (consisting primarily of solar modules, inverters, electrical and mounting hardware, project management and engineering, and construction labor), and site-specific costs.

The following table shows cost of sales by reportable segment for the years ended December 31, 2024, 2023, and 2022:

(Dollars in thousands)

Years Ended 2024 2023 2022 Change 2024 over 2023 2023 over 2022
Modules $2,342,045 $2,019,388 $2,312,881 $322,657 16% $(293,493) (13)%
Other 6,380 (1,465) 236,580 7,845 N/A (238,045) N/A
Cost of sales $2,348,425 $2,017,923 $2,549,461 $330,502 16% $(531,538) (21)%
% of net sales 55.8% 60.8% 97.3%

Cost of sales increased $330.5 million, or 16%, and decreased 5.0 percentage points as a percent of net sales when comparing 2024 with 2023. The increase in cost of sales was driven by a $322.7 million increase in our modules segment cost of sales primarily as a result of (i) higher costs of $532.2 million from an increase in the volume of modules sold, (ii) higher module storage costs of $102.6 million, and (iii) higher sales freight charges of $43.1 million, partially offset by (iv) a higher sales mix of modules qualifying for the advanced manufacturing production credit under Section 45X of the IRC, which decreased cost of sales by $346.4 million.

The increase in cost of sales was also driven by a $7.8 million increase in our residual business operations cost of sales primarily due to a favorable prior period settlement with a former supplier, which resulted in an $8.4 million benefit to cost of sales.

Gross profit

Gross profit may be affected by numerous factors, including the selling prices of our modules and the selling prices of projects and services included in our residual business operations, our manufacturing costs, the capacity utilization of our manufacturing facilities, and foreign exchange rates. Gross profit may also be affected by the mix of net sales from our modules business and residual business operations.

The following table shows gross profit for the years ended December 31, 2024, 2023, and 2022:

(Dollars in thousands)

Years Ended 2024 2023 2022 Change 2024 over 2023 2023 over 2022
Gross profit $1,857,864 $1,300,679 $69,858 $557,185 43% $1,230,821 >500%
% of net sales 44.2% 39.2% 2.7%

Gross profit increased 5.0 percentage points to 44.2% in 2024 from 39.2% in 2023 primarily due to (i) the advanced manufacturing credit previously discussed, (ii) the contract termination payments described above, and (iii) an increase in the volume of modules sold. These increases were partially offset by (iv) higher module storage costs and (v) a reduction in revenue related to manufacturing issues affecting Series 7 modules described above.

Selling, general and administrative

Selling, general and administrative expense consists primarily of salaries and other personnel-related costs, professional fees, insurance costs, and other business development and selling expenses.

The following table shows selling, general and administrative expense for the years ended December 31, 2024, 2023, and 2022:

(Dollars in thousands)

Years Ended 2024 2023 2022 Change 2024 over 2023 2023 over 2022
Selling, general and administrative $188,262 $197,622 $164,724 $(9,360) (5)% $32,898 20%
% of net sales 4.5% 6.0% 6.3%

Selling, general and administrative expense in 2024 decreased compared to 2023 primarily due to (i) lower employee bonus expense and lower share-based compensation expense, and (ii) lower costs associated with the implementation of a new global enterprise resource planning system as compared to the prior year, partially offset by (iii) higher employee compensation expense due to an increase in headcount, (iv) higher costs for certain legal matters, and (v) higher consulting fees.

Research and development

Research and development expense consists primarily of salaries and other personnel-related costs; the cost of products, materials, and outside services used in our R&D activities; and depreciation and amortization expense associated with R&D specific facilities and equipment. We maintain a number of programs and activities to improve our technology and processes in order to enhance the performance and reduce the costs of our solar modules.

The following table shows research and development expense for the years ended December 31, 2024, 2023, and 2022:

(Dollars in thousands)

Years Ended 2024 2023 2022 Change 2024 over 2023 2023 over 2022
Research and development $191,375 $152,307 $112,804 $39,068 26% $39,503 35%
% of net sales 4.5% 4.6% 4.3%

56

Research and development expense in 2024 increased compared to 2023 primarily due to higher depreciation and maintenance costs resulting from our significant investments in R&D facilities and equipment and higher employee compensation expense resulting from an increase in headcount.

Production start-up

Production start-up expense consists of costs associated with operating a production line before it is qualified for commercial production, including the cost of raw materials for solar modules run through the production line during the qualification phase, employee compensation for individuals supporting production start-up activities, and applicable facility related costs. Production start-up expense also includes costs related to the selection of a new site and implementation costs for manufacturing process improvements to the extent we cannot capitalize these expenditures.

The following table shows production start-up expense for the years ended December 31, 2024, 2023, and 2022:

(Dollars in thousands)

Years Ended 2024 2023 2022 Change 2024 over 2023 2023 over 2022
Production start-up $84,492 $64,777 $73,077 $19,715 30% $(8,300) (11)%
% of net sales 2.0% 2.0% 2.8%

During 2024, we incurred production start-up expense primarily for our fourth and fifth manufacturing facilities in the U.S. and also for a limited commercial production run of modules employing our CuRe technology. During 2023, we incurred production start-up expense primarily for our first manufacturing facility in India, our third and fourth manufacturing facilities in the U.S., and certain manufacturing upgrades at our Malaysian facilities.

Litigation loss

The following table shows litigation loss for the years ended December 31, 2024, 2023, and 2022:

(Dollars in thousands)

Years Ended 2024 2023 2022 Change 2024 over 2023 2023 over 2022
Litigation loss 430 35,590 — $(35,160) (99)% $35,590 N/A
% of net sales —% 1.1% —%

In July 2021, Southern Power Company filed an arbitration demand with the American Arbitration Association against two of the Company’s subsidiaries alleging breach of the EPC agreements for five projects in the United States for which such subsidiaries served as the EPC contractor. On July 19, 2023, the arbitration panel issued an interim award letter adopting certain of Southern’s proposed individual award claims in the amount of $35.6 million. See Note 14. “Commitments and Contingencies” to our condensed consolidated financial statements for further information about this matter.

Gain on sales of businesses, net

The following table shows gain on sales of businesses, net for the years ended December 31, 2024, 2023, and 2022:

(Dollars in thousands)

Years Ended 2024 2023 2022 Change 2024 over 2023 2023 over 2022
Gain on sales of businesses, net $1,115 $6,883 $253,511 $(5,768) (84)% $(246,628) (97)%
% of net sales —% 0.2% 9.7%

57

During 2022, we completed the sales of our Japan project development business and our Japan O&M operations to PAG Real Assets (“PAG”) and the sales of certain other international O&M operations to a subsidiary of Clairvest Group, Inc. (“Clairvest”). In 2023, we recognized certain post-closing adjustments and earnouts associated with the prior sale of our Japan project development business. In 2024, there was no significant activity related to gains on sales of businesses. See Note 4. “Sales of Businesses” to our consolidated financial statements for further information related to these transactions.

Foreign currency loss, net

Foreign currency loss, net consists of the net effect of gains and losses resulting from holding assets and liabilities and conducting transactions denominated in currencies other than our subsidiaries’ functional currencies.

The following table shows foreign currency loss, net for the years ended December 31, 2024, 2023, and 2022:

(Dollars in thousands)

Years Ended 2024 2023 2022 Change 2024 over 2023 2023 over 2022
Foreign currency loss, net $(24,976) $(21,533) $(16,414) $(3,443) 16% $(5,119) 31%

Foreign currency loss for the year ended December 31, 2024 was consistent with the prior year.

Interest income

Interest income is earned on our cash, cash equivalents, marketable securities, restricted cash, restricted cash equivalents, and restricted marketable securities. Interest income also includes interest earned from late customer payments.

The following table shows interest income for the years ended December 31, 2024, 2023, and 2022:

(Dollars in thousands)

Years Ended 2024 2023 2022 Change 2024 over 2023 2023 over 2022
Interest income $89,090 $97,667 $33,284 $(8,577) (9)% $64,383 193%

Interest income during 2024 decreased compared to 2023 primarily due to lower interest rates on cash and cash equivalents and lower average balances of time deposits, partially offset by increased interest earned on trade receivables.

Interest expense, net

Interest expense, net is primarily comprised of interest incurred on debt. We may capitalize interest expense to our property, plant and equipment when such costs qualify for interest capitalization, which reduces the amount of net interest expense reported in any given period.

The following table shows interest expense, net for the years ended December 31, 2024, 2023, and 2022:

(Dollars in thousands)

Years Ended 2024 2023 2022 Change 2024 over 2023 2023 over 2022
Interest expense, net $(38,870) $(12,965) $(12,225) $(25,905) 200% $(740) 6%

Interest expense, net during 2024 increased compared to 2023 primarily due to additional borrowing under various arrangements in India and higher capitalized interest balances in the prior year related to the construction of our manufacturing plant in India.

Other (expense) income, net

Other (expense) income, net is primarily comprised of miscellaneous items and realized gains and losses on the sale of marketable securities and restricted marketable securities.

The following table shows other (expense) income, net for the years ended December 31, 2024, 2023, and 2022:

(Dollars in thousands)

Years Ended 2024 2023 2022 Change 2024 over 2023 2023 over 2022
Other (expense) income, net $(13,326) $(29,145) $31,189 $15,819 (54)% $(60,334) N/A

Other expense, net decreased in 2024 compared to 2023 primarily due to the impairment of a strategic investment in 2023.

Income tax expense

Income tax expense or benefit, deferred tax assets and liabilities, and liabilities for unrecognized tax benefits reflect our best estimates of current and future taxes to be paid. We are subject to income taxes in both the United States and numerous foreign jurisdictions in which we operate, principally Singapore, Malaysia, Vietnam, and India. Significant judgments and estimates are required to determine our consolidated income tax expense. The statutory federal corporate income tax rate in the United States is 21%, and the tax rates in Singapore, Malaysia, Vietnam, and India are 17%, 24%, 20%, and 17%, respectively. In Malaysia, we have been granted a long-term tax holiday, scheduled to expire in 2027, pursuant to which substantially all of our income earned in Malaysia is exempt from income tax, conditional upon our continued compliance with certain employment and investment thresholds. In Vietnam, we have been granted a long-term tax incentive, scheduled to expire at the end of 2036, pursuant to which income earned in Vietnam is subject to reduced annual tax rates, conditional upon our continued compliance with certain revenue and R&D spending thresholds.

The following table shows income tax expense for the years ended December 31, 2024, 2023, and 2022:

(Dollars in thousands)

Years Ended 2024 2023 2022 Change 2024 over 2023 2023 over 2022
Income tax expense $(114,294) $(60,513) $(52,764) $(53,781) 89% $(7,749) 15%
Effective tax rate 8.1% 6.8% 613.7%

Our tax rate is affected by the advanced manufacturing production credit under Section 45X and recurring items such as tax rates in foreign jurisdictions and the relative amounts of income we earn in those jurisdictions. The rate is also affected by discrete items that may occur in any given period but are not consistent from period to period. Income tax expense increased by $53.8 million during 2024 compared to 2023 primarily due to higher pretax income in the current year and the impact of taxes due on U.S. inclusions in taxable income related to global intangible low-taxed income (“GILTI”), partially offset by the beneficial effects of tax law associated with the IRA and the long-term tax holiday in Malaysia.

Liquidity and Capital Resources

As of December 31, 2024, we believe that our cash, cash equivalents, marketable securities, cash flows from operating activities, and contracts with customers for the future sale of solar modules will be sufficient to meet our working capital and capital expenditure needs for at least the next 12 months. In addition, we have availability under our Revolving Credit Facility, which remains unused as of December 31, 2024. To the extent we offer extended payment terms to customers, fail to collect trade receivables in a timely manner, or face other challenges in managing our working capital, we may be required to use our Revolving Capital Facility or other temporary sources of funding. For example, we have entered into factoring agreements with certain financial institutions and have sold certain trade receivables under those factoring facilities. However, we do not use factoring arrangements as an integral part of our financing for working capital. As necessary, we also believe we will have adequate access to the capital markets. We monitor our working capital to ensure we have adequate liquidity, both domestically and internationally. We intend to maintain appropriate debt levels based upon cash flow expectations, our overall cost of capital, and expected cash requirements for operations, including near-term construction activities and purchases of manufacturing equipment for our newest manufacturing facilities in the United States. However, our ability to raise capital on terms commercially acceptable to us could be constrained if there is insufficient lender or investor interest due to company-specific, industry-wide, or broader market concerns. Any incremental debt financing could result in increased debt service expenses and/or restrictive covenants, which could limit our ability to pursue our strategic plans.

As of December 31, 2024, we had $1.8 billion in cash, cash equivalents, and marketable securities compared to $2.1 billion as of December 31, 2023. This decrease was primarily driven by purchases of property, plant and equipment for our U.S. and Indian facilities and various operating expenditures, partially offset by proceeds from the sale of Section 45X tax credits, net cash receipts from module sales, and receipts from factoring of receivables. As of December 31, 2024 and 2023, $0.7 billion and $1.2 billion of our cash, cash equivalents, and marketable securities, respectively, were held by our foreign subsidiaries and were primarily based in U.S. dollar and Indian Rupee denominated holdings. Our investment policy seeks to preserve our investment principal and maintain adequate liquidity to meet our cash flow requirements, while at the same time optimizing the return on our investments. Such policy applies to all invested funds, whether managed internally or externally. Pursuant to such policy, we place our investments with a diversified group of high-quality financial institutions and limit the concentration of such investments with any one counterparty. We place significant emphasis on the creditworthiness of financial institutions and assess the credit ratings and financial health of our counterparty financial institutions when making investment decisions.

We utilize a variety of tax planning and financing strategies in an effort to ensure that our worldwide cash is available in the locations in which it is needed. If certain international funds were needed for our operations in the United States, we may be required to accrue and pay certain U.S. and foreign taxes to repatriate such funds. We maintain the intent and ability to permanently reinvest our accumulated earnings outside the United States, with the exception of certain subsidiaries for which applicable income taxes have been recorded as of December 31, 2024. During the year ended December 31, 2024, we reversed our position to indefinitely reinvest the accumulated earnings of a foreign subsidiary, allowing us to repatriate $1.0 billion of offshore funds to support our strategic investments in the United States. Our worldwide cash may also be affected by changes to foreign government banking regulations that restrict our ability to move funds among various jurisdictions under certain circumstances, which could negatively impact our access to capital, resulting in an adverse effect on our liquidity and capital resources.

Although we compete in markets that do not require solar-specific government subsidies or incentive programs, such incentives continue to influence the demand for PV solar energy around the world. For example, the financial incentives provided by the IRA are expected to increase both the demand for, and the domestic manufacturing of, solar modules in the United States. We continue to evaluate the extent of benefits available to us by the IRA, which are expected to favorably impact our liquidity and capital resources in future periods. For example, we currently expect to qualify for the advanced manufacturing production credit under Section 45X of the IRC, which provides certain specified benefits for solar modules and solar module components manufactured in the United States and sold to third parties. Such credit may be refundable by the IRS or transferable to a third party and is available from 2023 to 2032, subject to phase down beginning in 2030. Based on the current form factor of our modules, we expect to qualify for a credit of approximately 17 cents per watt for each module produced in the United States and sold to a third party. Accordingly, we expect the advanced manufacturing production credit will provide us with a significant source of funding throughout its 10-year period. In December 2024, we entered into two agreements with Visa for the sale of $857.2 million of Section 45X tax credits we generated during 2024 for aggregate cash proceeds of $818.6 million. We received initial cash proceeds of $616.0 million in December 2024 and expect to receive the remaining cash proceeds during the first quarter of 2025. In December 2023, we entered into two agreements with Fiserv for the sale of $687.2 million of Section 45X tax credits we generated during 2023, for aggregate cash proceeds of $659.7 million. We received the full cash proceeds during 2024. For more information about certain risks associated with the benefits available to us under the IRA, see Item 1A. “Risk Factors – “We have received and expect to continue to receive certain financial benefits as a result of tax incentives provided by the Inflation Reduction Act of 2022. If these financial benefits vary significantly from our assumptions, our business, financial condition, and results of operations could be adversely affected.” See Note 9. “Government Grants” to our consolidated financial statements for further information about government grants.

As a result of various market opportunities and increased demand for our products, we commenced production of Series 7 modules at our third manufacturing facility in Ohio and our first manufacturing facility in India during 2023 and at our first manufacturing facility in Alabama during 2024. We also completed the expansion of our manufacturing footprint at our existing facilities in Ohio and India during 2024. We are in the process of further expanding our manufacturing capacity, including the construction of our fifth U.S. manufacturing facility, which is expected to commence operations in the second half of 2025. We anticipate our remaining investment in this U.S. facility to be approximately $0.7 billion, which is expected to be incurred throughout 2025. The capital expenditures necessary to expand our capacity may be financed, in part, by cash on hand, advance payments from customers for module sales in future periods, the advanced manufacturing production credit described above, and/or near-term bridge financing instruments.

In addition to the expansion described above, we continue to increase the nameplate production capacity of our existing manufacturing facilities by improving our production throughput, increasing module wattage, and reducing manufacturing yield losses. We have a demonstrated history of innovation, continuous improvement, and manufacturing success driven by our significant investments in various R&D initiatives. We continue to invest significant financial resources in such initiatives, including the completion of a dedicated R&D innovation center in Ohio to support the implementation of our technology roadmap. This facility features a high-volume manufacturing scale production pilot line, which is expected to enable the production of full-sized prototypes of thin film and tandem PV modules. Such R&D facility was commissioned in July 2024. During 2025, we expect to spend between $1.3 billion and $1.5 billion for capital expenditures, including the new facilities mentioned above, and upgrades to machinery and equipment that we believe will further increase our module wattage and expand capacity and throughput at our facilities. These capital investments, and any other potential investments to implement our technology roadmap, may require significant internal and possibly external sources of capital and may be subject to certain risks and uncertainties described in Item 1A. “Risk Factors,” including those described under the headings “Our future success depends on our ability to effectively balance manufacturing production with market demand, effectively manage our cost per watt, and, when necessary, continue to build new manufacturing plants over time in response to market demand, all of which are subject to risks and uncertainties” and “If any future production lines are not built in line with committed schedules, it may adversely affect our future growth plans. If any future production lines do not achieve operating metrics similar to our existing production lines, our solar modules could perform below expectations and cause us to lose customers.”

We have also committed and expect to continue to commit significant working capital to purchase various raw materials used in our module manufacturing process. Our failure to obtain raw materials and components that meet our quality, quantity, and cost requirements in a timely manner could increase our manufacturing costs or interrupt or impair our ability to manufacture our solar modules. Accordingly, we may enter into long-term supply agreements to mitigate potential risks related to the procurement of key raw materials and components, and such agreements may be noncancelable or cancelable with a significant penalty. For example, we have entered into long-term supply agreements for the purchase of certain specified minimum volumes of substrate glass for our PV solar modules. We have the right to terminate certain of these agreements upon payment of specified termination penalties (which, in aggregate, are up to $475.1 million as of December 31, 2024 and decline over the remaining supply periods). Additionally, for certain strategic suppliers, we have made, and may in the future be required to make, certain advance payments to secure the raw materials necessary for our module manufacturing.

We have also committed certain financial resources to fulfill our solar module collection and recycling obligations and have established a trust under which these funds are put into custodial accounts with an established and reputable bank. As of December 31, 2024, such funds were comprised of restricted marketable securities of

$199.1 million and associated restricted cash and cash equivalents balances of $5.0 million. As of December 31, 2024, our module collection and recycling liability was $134.4 million. Trust funds may be disbursed for qualified module collection and recycling costs (including capital and facility related recycling costs), payments to customers for assuming collection and recycling obligations, and reimbursements of any overfunded amounts. Investments in the trust must meet certain investment quality criteria comparable to highly rated government or agency bonds. As necessary, we adjust the funded amounts for our estimated collection and recycling obligations based on the estimated costs of collecting and recycling covered modules, estimated rates of return on our restricted marketable securities, and an estimated solar module life of 25 years, less amounts already funded in prior years.

As of December 31, 2024, we had no off-balance sheet debt or similar obligations, other than financial assurance related instruments, which are not classified as debt. We do not guarantee any third-party debt. See Note 14. “Commitments and Contingencies” to our consolidated financial statements for further information about our financial assurance related instruments.

Cash Flows

The following table summarizes key cash flow activity for the years ended December 31, 2024, 2023, and 2022 (in thousands):

2024 2023 2022
Net cash provided by operating activities $1,217,999 $602,260 $873,369
Net cash used in investing activities (1,563,307) (472,791) (1,192,574)
Net cash provided by financing activities 24,849 336,853 309,392
Effect of exchange rate changes on cash, cash equivalents, restricted cash, and restricted cash equivalents (6,387) 5,285 47,438
Net (decrease) increase in cash, cash equivalents, restricted cash, and restricted cash equivalents $(326,846) $471,607 $37,625

Operating Activities

The increase in net cash provided by operating activities during 2024 was primarily driven by proceeds from the sale of Section 45X tax credits and receipts from factoring of receivables, partially offset by an increase in payments made to suppliers compared to the prior year, and lower cash receipts from module sales in the current year.

Investing Activities

The increase in net cash used in investing activities during 2024 was primarily due to lower proceeds from the sales and maturities of marketable securities in the current year and higher purchases of property, plant and equipment compared to the prior year for our U.S. and Indian facilities, partially offset by lower purchases of marketable securities in the current year.

Financing Activities

The decrease in net cash provided by financing activities during 2024 was primarily due to repayment of debt in the current year.

Recent Accounting Pronouncements

In December 2023, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) 2023-09, Income Taxes (Topic 740) - Improvements to Income Tax Disclosures, which requires greater disaggregation of an entity’s income tax disclosures. Among other things, ASU 2023-09 requires entities to disclose (i) specific categories in the effective tax rate reconciliation, (ii) pretax income or loss from continuing operations, separated between domestic and foreign jurisdictions, (iii) income tax expense or benefit from continuing operations, separated by federal, state, and foreign jurisdictions, and (iv) income taxes paid to federal, state, and foreign jurisdictions. ASU 2023-09 is effective for public companies for annual periods beginning after December 15, 2024, and early adoption is permitted. We are currently evaluating the impact ASU 2023-09 will have on our consolidated financial statements and associated disclosures.

In November 2024, the FASB issued ASU 2024-03, Income Statement - Reporting Comprehensive Income - Expense Disaggregation Disclosures (Subtopic 220-40): Disaggregation of Income Statement Expenses, which requires additional disclosure of specific types of expenses included in the expense captions presented on the face of the income statement. ASU 2024-03 is effective for public companies for annual reporting periods beginning after December 15, 2026 and interim reporting periods beginning after December 15, 2027. Early adoption is permitted. The disclosure requirements will be applied on a prospective basis, with the option to apply retrospectively. We are currently evaluating the impact ASU 2024-03 will have on our associated disclosures.

Critical Accounting Estimates

In preparing our consolidated financial statements in conformity with generally accepted accounting principles in the United States (“U.S. GAAP”), we make estimates and assumptions that affect the amounts of reported assets, liabilities, revenues, and expenses, as well as the disclosure of contingent liabilities. Some of our accounting policies require the application of significant judgment in the selection of the appropriate assumptions for making these estimates. By their nature, these judgments are subject to an inherent degree of uncertainty. We base our judgments and estimates on our historical experience, our forecasts, and other available information as appropriate. The actual results experienced by us may differ materially and adversely from our estimates. To the extent there are material differences between our estimates and the actual results, our future results of operations will be affected. Our significant accounting policies are described in Note 2. “Summary of Significant Accounting Policies” to our consolidated financial statements. The accounting policies that require the most significant judgment and estimates include the following:

Accrued Solar Module Collection and Recycling Liability. We previously established a module collection and recycling program, which has since been discontinued, to collect and recycle modules sold and covered under such program once the modules reach the end of their service lives. For legacy customer sales contracts that are covered under this program, we recognized expense at the time of sale based on the estimated cost to collect and recycle the covered solar modules. We estimate the cost of our obligations based on the present value of the expected future cost of collecting and recycling the solar modules, which includes estimates for the cost of packaging materials; the cost of freight from the solar module installation sites to a recycling center; material, labor, and capital costs; and by-product credits for certain materials recovered during the recycling process. We base these estimates on our experience collecting and recycling solar modules and on certain assumptions regarding costs at the time the solar modules will be collected and recycled. In the periods between the time of sale and the related settlement of the collection and recycling obligation, we accrete the carrying amount of the associated liability and classify the corresponding expense within “Selling, general and administrative” expense on our consolidated statements of operations.

We periodically review our estimates of expected future recycling costs and may adjust our liability accordingly. Such adjustments are presented within “Cost of Sales” on our consolidated statements of operations. During the year ended December 31, 2024, we completed our annual cost study of obligations under our module collection and recycling program and determined that no adjustment to the associated liability was necessary. As of December 31, 2024, a 10% increase in the expected future recycling costs per module would increase the liability by $14.0 million.

Product Warranties. We provide a limited PV solar module warranty covering defects in materials and workmanship under normal use and service conditions for up to 12.5 years. We also typically warrant that modules installed in accordance with agreed-upon specifications will produce at least 98% of their labeled power output rating during the first year, with the warranty coverage reducing by a degradation factor every year thereafter throughout the limited power output warranty period of up to 30 years. Among other things, our solar module warranty also covers the resulting power output loss from cell cracking.

When we recognize revenue for sales of modules, we accrue liabilities for the estimated future costs of meeting our limited warranty obligations. We make and revise these estimates based primarily on the number of solar modules under warranty installed at customer locations, our historical experience with and projections of warranty claims, and our estimated per-module replacement costs. We also monitor our expected future module performance through certain quality and reliability testing and actual performance in certain field installation sites.

In general, we expect the return rates for our Series 6 and Series 7 modules to be lower than our older series. Accordingly, we estimate that the return rate for such newer series of module technology will be less than 1%. As of December 31, 2024, a 100 basis point increase in the return rates across all series of module technology would increase our product warranty liability by $183.5 million.

During the year ended December 31, 2024, we identified manufacturing issues affecting certain Series 7 modules manufactured in 2023 and 2024 that may cause the modules to experience premature power loss once installed in the field. As part of our monitoring of module performance through certain field installation sites, we tested over 100 Series 7 modules, which provided a preliminary view of potential levels of underperformance related to our initial production of Series 7 modules. We then estimated what subset of the entire population of Series 7 modules sold was affected by the manufacturing issues as not all Series 7 modules exhibited the variability in the production process that may lead to the identified underperformance. Accordingly, in arriving at the range of reasonably possible losses, we estimated that approximately two-thirds of Series 7 modules sold as of December 31, 2024 may have been impacted, based on the Series 7 production schedule and the dates of when the underlying manufacturing issues were addressed at each affected facility.

Based on currently available information and certain assumptions and estimates, we believe a reasonable estimate of the aggregate losses related to these manufacturing issues will range from approximately $56 million to $100 million. The low end of the range of reasonably possible losses reflects performance data from select samples of Series 7 modules compared to warranted levels of performance, along with expectations of favorable Series 7 module energy performance attributes, such as a superior temperature coefficient and spectral response, that may partially offset underperformance from the identified issues. Such estimate of potential net underperformance was multiplied by the average selling price per watt of Series 7 modules to determine the low end of the expected costs to commercially settle warranty claims. The high end of the range of reasonably possible losses excludes any such favorable energy performance expectations from our advanced module technology and includes an estimate of incremental module underperformance beyond that exhibited in our samples of module performance data.

Given the inherent limitations of sampling combined with the variability of module performance at different field installation sites, no individual amount within the range represented a better estimate than any other amount. Accordingly, as of December 31, 2024, we increased our product warranty liability by the low end of the range, which we recorded as a reduction to revenue. The ultimate loss we will incur for these manufacturing issues will depend on the extent of the premature power loss that is experienced in relation to the obligations under our limited product warranties, as well as any potential additional commitments we may make to remediate the affected modules. A 100 basis point decrease in the module performance data relative to nameplate capacity across our estimate of the impacted Series 7 modules would result in an additional $14 million increase in our product warranty liability.

As of December 31, 2024, we held approximately 0.7 GW of Series 7 modules that may potentially be impacted by the identified manufacturing issues. As we sell these modules, our product warranty liability may increase to the extent the modules exhibit the identified underperformance. Over the next 12 months, we expect to obtain additional information related to the issues affecting certain previously manufactured Series 7 modules and related to the actions we may take in response to the associated warranty claims. As such information becomes available to us, our estimate of the aggregate losses related to these manufacturing issues may change, and any change in estimate may also result in a change to our product warranty liability.

Government Grants. We continue to evaluate the extent of benefits available to us pursuant to the IRA, which we expect will favorably impact our results of operations in future periods. For example, we currently expect to qualify for the advanced manufacturing production credit under Section 45X of the IRC, which provides certain specified benefits for solar modules and solar module components manufactured in the United States and sold to third parties. For eligible components, the credit is equal to (i) $12 per square meter for a PV wafer, (ii) 4 cents multiplied by the capacity of a PV cell in watts, and (iii) 7 cents multiplied by the capacity of a PV module in watts. Based on the current form factor of our modules, we expect to qualify for a credit of approximately 17 cents per watt for each module produced in the United States and sold to a third party. During the year ended December 31, 2024, we recognized $997.6 million of Section 45X credits as a reduction to “Cost of sales.”

For further information about certain key aspects of the IRA, see Item 1A. “Risk Factors – We have received and expect to continue to receive certain financial benefits as a result of tax incentives provided by the Inflation Reduction Act of 2022. If these financial benefits vary significantly from our assumptions, our business, financial condition, and results of operations could be adversely affected.” Any modifications to the law or its effects arising, for example, through (i) technical guidance and regulations from the IRS and U.S. Treasury Department, (ii) subsequent amendments to or interpretations of the law, and/or (iii) future laws or regulations rendering certain provisions of the IRA less effective or ineffective, in whole or in part, could result in material adverse changes to the benefits we have recognized and expect to recognize.

We recognize grants expected to be received directly from a government entity at their stated value. When we expect to transfer grants to a third party, we recognize the grants at, or adjust their carrying value to, the amount expected to be received from the transaction. Accordingly, changes in the expected realization of the grants could affect our results of operations. Additionally, the amount expected to be received from transfers to third parties may fluctuate based on market conditions or other factors that impact whether, and for how much, buyers are willing to purchase such credits.

Market risk

As filed, 8,530 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Foreign Currency Exchange Risk

Cash Flow Exposure. We expect certain of our subsidiaries to have future cash flows that will be denominated in currencies other than the subsidiaries’ functional currencies. Changes in the exchange rates between the functional currencies of our subsidiaries and the other currencies in which they transact will cause fluctuations in the cash flows we expect to receive or pay when these cash flows are realized or settled. Accordingly, from time to time we may enter into foreign exchange forward contracts to hedge a portion of these forecasted cash flows. These foreign exchange forward contracts qualify for accounting as cash flow hedges in accordance with Accounting Standards Codification (“ASC”) 815 and we designate them as such. We report unrealized gains or losses on such contracts in “Accumulated other comprehensive loss” and subsequently reclassify applicable amounts into earnings when the hedged transaction occurs and impacts earnings. For additional details on our derivative hedging instruments and activities, see Note 10. “Derivative Financial Instruments” to our consolidated financial statements.

Certain of our international operations, such as our manufacturing facilities in Malaysia and Vietnam, pay a portion of their operating expenses, including associate wages and utilities, in local currencies, which exposes us to foreign currency exchange risk for such expenses. Our manufacturing facilities are also exposed to foreign currency exchange risk for purchases of certain equipment and raw materials from international vendors. To the extent we expand into new markets, particularly emerging markets, our total foreign currency exchange risk, in terms of both size and exchange rate volatility, and the number of foreign currencies we are exposed to could increase significantly.

Transaction Exposure. Many of our subsidiaries have assets and liabilities (primarily cash, receivables, deferred taxes, payables, accrued expenses, lease liabilities, debt, and solar module collection and recycling liabilities) that are denominated in currencies other than the subsidiaries’ functional currencies. Changes in the exchange rates between the functional currencies of our subsidiaries and the other currencies in which these assets and liabilities are denominated will create fluctuations in our reported consolidated statements of operations. We may enter into foreign exchange forward contracts or other financial instruments to economically hedge assets and liabilities against the effects of currency exchange rate fluctuations. The gains and losses on such foreign exchange forward contracts will economically offset all or part of the transaction gains and losses that we recognize in earnings on the related foreign currency denominated assets and liabilities. For additional details on our economic hedging instruments and activities, see Note 10. “Derivative Financial Instruments” to our consolidated financial statements.

As of December 31, 2024, a 10% change in the U.S. dollar relative to our primary foreign currency exposures would have resulted in an $8.8 million change to our net foreign currency income or loss, including the effect of our hedging activities.

Interest Rate Risk

Variable Rate Debt Exposure. We are exposed to interest rate risk as certain of our debt arrangements have variable interest rates, exposing us to variability in interest expense and cash flows. See Note 13. “Debt” to our consolidated financial statements for additional information on our debt borrowing rates. An increase in relevant interest rates would increase the cost of borrowing under certain of our debt arrangements. For the year ended December 31, 2024, a 100 basis point change in such variable interest rates would not have had a significant impact to our interest expense.

Customer Financing Exposure. We are also indirectly exposed to interest rate risk because many of our customers depend on debt financings to purchase modules. An increase in interest rates could make it challenging for our customers to obtain the capital necessary to make such purchases on favorable terms, or at all. Such factors could reduce demand or lower the price we can charge for our modules, thereby reducing our net sales and gross profit.

Marketable Securities and Restricted Marketable Securities Exposure. We invest in various debt securities, which exposes us to interest rate risk. The primary objectives of our investment activities are to preserve principal and provide liquidity, while at the same time maximizing the return on our investments. Many of the securities in which we invest may be subject to market risk. Accordingly, a change in prevailing interest rates may cause the market value of such investments to fluctuate. For example, if we hold a security that was issued with an interest rate fixed at the then-prevailing rate and the prevailing interest rate subsequently rises, the market value of our investment may decline.

For the year ended December 31, 2024, our marketable securities earned a return of 5%, including the impact of fluctuations in the price of the underlying securities, and had a weighted-average maturity of 1 month as of the end of the period. Based on our investment positions as of December 31, 2024, a hypothetical 100 basis point change in interest rates would not have had a significant impact on the market value of our marketable securities investment portfolio. For the year ended December 31, 2024, our restricted marketable securities incurred a loss of less than 1%, including the impact of fluctuations in the price of the underlying securities, and had a weighted-average maturity of approximately 10 years as of the end of the period. Based on our restricted marketable securities positions as of December 31, 2024, a hypothetical 100 basis point change in interest rates would have resulted in a $15.4 million change in the market value of our restricted marketable securities portfolio.

Commodity and Component Risk

Some of our raw materials and components are sourced from a limited number of suppliers or a single supplier. Although we may enter into long-term supply contracts for certain raw materials and components, we may be exposed to price changes for certain raw materials and components used to manufacture our solar modules for which we are unable to secure long-term supply contracts or for which our demand exceeds our committed supply. From time to time, we may utilize derivative hedging instruments to mitigate such raw material price changes. In addition, the failure of a key supplier could disrupt our supply chain, which could result in higher prices and/or a disruption in our manufacturing process. As a result, we may be in default of our delivery obligations if we experience a manufacturing disruption. In addition to price changes in the raw materials and components used in our manufacturing process, we are also exposed to price changes associated with the shipping, handling, storage, and distribution of our modules. To mitigate such price changes, we have used, and expect to continue using, module contract structures that provide additional consideration to us if the cost of certain raw materials or logistics services exceeds a defined threshold. However, we may be unable to pass along the full amount of cost increases we experience for such raw materials, components, and logistics services to our customers.

Credit Risk

We have certain financial instruments that subject us to credit risk. These consist primarily of cash, cash equivalents, marketable securities, accounts receivable, restricted cash, restricted cash equivalents, restricted marketable securities, foreign exchange forward contracts, and commodity swap contracts. We are exposed to credit losses in the event of nonperformance by the counterparties to our financial instruments. We place these instruments with various high-quality financial institutions and limit the amount of credit risk from any one counterparty. We monitor the credit standing of our counterparty financial institutions. Our net sales are primarily concentrated among a limited number of customers. We monitor the financial condition of our customers and perform credit evaluations whenever considered necessary. We typically require some form of payment security from our customers, including, but not limited to, advance payments, parent guarantees, letters of credit, bank guarantees, or surety bonds.

Controls and procedures

As filed, 4,264 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Evaluation of Disclosure Controls and Procedures

We carried out an evaluation, under the supervision and with the participation of management, including our Chief Executive Officer and Chief Financial Officer, of the effectiveness of our “disclosure controls and procedures” as defined in Exchange Act Rule 13a-15(e) and 15d-15(e). Based on that evaluation, our Chief Executive Officer and Chief Financial Officer concluded that as of December 31, 2024 our disclosure controls and procedures were effective to ensure that information required to be disclosed by us in reports that we file or submit under the Exchange Act is recorded, processed, summarized, and reported within the time periods specified in SEC rules and forms, and that such information is accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate, to allow timely decisions regarding required disclosure.

Management’s Report on Internal Control over Financial Reporting

Our management is responsible for establishing and maintaining adequate “internal control over financial reporting,” as defined in Exchange Act Rule 13a-15(f) and 15d-15(f). We also carried out an evaluation, under the supervision and with the participation of management, including our Chief Executive Officer and Chief Financial Officer, of the effectiveness of our internal control over financial reporting as of December 31, 2024 based on the criteria established in Internal Control – Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”). Our internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with U.S. GAAP. Based on such evaluation, our management concluded that our internal control over financial reporting was effective as of December 31, 2024. The effectiveness of our internal control over financial reporting as of December 31, 2024 has also been audited by PricewaterhouseCoopers LLP, an independent registered public accounting firm, as stated in its report, which appears herein.

Changes in Internal Control over Financial Reporting

We also carried out an evaluation, under the supervision and with the participation of management, including our Chief Executive Officer and Chief Financial Officer, of our “internal control over financial reporting” to determine whether any changes in our internal control over financial reporting occurred during the quarter ended December 31, 2024 that materially affected, or are reasonably likely to materially affect, our internal control over financial reporting. Based on that evaluation, there were no such changes in our internal control over financial reporting that occurred during the quarter ended December 31, 2024.

Limitations on the Effectiveness of Controls

Control systems, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the control systems’ objectives are being met. Further, the design of any system of controls must reflect the fact that there are resource constraints, and the benefits of all controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within our company have been detected. These inherent limitations include the realities that judgments in decision-making can be faulty and that breakdowns can occur because of error or mistake. Control systems can also be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the controls. The design of any system of controls is also based in part upon certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions. Over time, controls may become inadequate because of changes in conditions or deterioration in the degree of compliance with policies or procedures.

Figures reported in this filing

Standardized line items from the XBRL in this filing, for the period ended 2024-12-31. Comparative periods it repeats are left out.

Figures reported in this filing
Line itemPeriodValueXBRL concept
Revenue12 months2024-01-01 to 2024-12-31$4.21bnus-gaap:Revenues
Cost of revenue12 months2024-01-01 to 2024-12-31$2.35bnus-gaap:CostOfGoodsAndServicesSold
Gross profit12 months2024-01-01 to 2024-12-31$1.86bnus-gaap:GrossProfit
Research and development12 months2024-01-01 to 2024-12-31$191.4mus-gaap:ResearchAndDevelopmentExpense
Selling, general and administrative12 months2024-01-01 to 2024-12-31$188.3mus-gaap:SellingGeneralAndAdministrativeExpense
Operating income12 months2024-01-01 to 2024-12-31$1.39bnus-gaap:OperatingIncomeLoss
Interest expense12 months2024-01-01 to 2024-12-31$38.9mus-gaap:InterestExpenseNonoperating
Income tax12 months2024-01-01 to 2024-12-31$114.3mus-gaap:IncomeTaxExpenseBenefit
Net income12 months2024-01-01 to 2024-12-31$1.29bnus-gaap:NetIncomeLoss
Diluted EPS12 months2024-01-01 to 2024-12-31$12.02us-gaap:EarningsPerShareDiluted
Basic EPS12 months2024-01-01 to 2024-12-31$12.07us-gaap:EarningsPerShareBasic
Diluted shares (weighted)12 months2024-01-01 to 2024-12-31107,525,000 sharesus-gaap:WeightedAverageNumberOfDilutedSharesOutstanding
Operating cash flow12 months2024-01-01 to 2024-12-31$1.22bnus-gaap:NetCashProvidedByUsedInOperatingActivities
Capital expenditure12 months2024-01-01 to 2024-12-31$1.53bnus-gaap:PaymentsToAcquirePropertyPlantAndEquipment
Cash and equivalentsAt period end2024-12-31$1.62bnus-gaap:CashAndCashEquivalentsAtCarryingValue
Current assetsAt period end2024-12-31$5.09bnus-gaap:AssetsCurrent
Total assetsAt period end2024-12-31$12.12bnus-gaap:Assets
Current liabilitiesAt period end2024-12-31$2.08bnus-gaap:LiabilitiesCurrent
Total liabilitiesAt period end2024-12-31$4.15bnus-gaap:Liabilities
Long-term debtAt period end2024-12-31$373.4mus-gaap:LongTermDebtNoncurrent
Current portion of debtAt period end2024-12-31$236.4mus-gaap:DebtCurrent
Shareholders' equityAt period end2024-12-31$7.98bnus-gaap:StockholdersEquity

Source: SEC EDGAR, the filing index for accession 0001274494-25-000010. Last ingested by Listed: Nov 13, 2026, 16:09 ET. Listed shows no prices and gives no investment advice.