Listed

Processa Pharmaceuticals, Inc.: Form 10-K for the period ended Dec 31, 2013

Filed with the SEC on Mar 27, 2014 and accepted by EDGAR at Mar 27, 2014, 15:39 ET.

Share

Business

As filed, 15,889 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Overview

We are an asphalt preservation and repair equipment company. Our innovative, and eco-friendly hot-in-place recycling process corrects surface distresses within the top three inches of existing pavement by heating the surface material to a temperature between 350° and 400° Fahrenheit with our electrically powered infrared heating equipment, mechanically loosening the heated material with our processor/tiller attachment that is optimized for producing a seamless repair, and mixing in additional recycled asphalt pavement and a binder (asphalt-cement), and then compacting repaired area with a vibrating roller or compactor. We believe our equipment, technology and processes provide savings over other repair processes that can be more labor and equipment intensive.

We have not yet commercialized our products and we are therefore classified as a development stage enterprise. Although we have had some limited sales for our products, our efforts continue to be principally focused on developing our distribution network and improving our products to make them completely standardized. We believe we will have commercialized our products in calendar year 2014 and will be focused at that time on the sale of our products. At such time as that occurs, we will no longer be classified as a development stage company. We currently operate in one business segment.

Heatwurx Products

Heatwurx HWX-30 - Electrically Powered Infrared Heater

The HEATWURX™ HWX-30 Electric Infrared Heater is designed to effectively heat asphalt pavement to a pliable 350° to 400° Fahrenheit without scorching, burning, or oxidizing the existing asphalt. The HWX-30 is easily attached to a skid steer with standard quick releases and is a self-contained mobile infrared heater that can be used to repair/rejuvenate asphalt damaged by potholes and cracking. The HEATWURX™ HWX-30 Electric Infrared Heater specifications are as follows:

  • Weight 3,550 lbs. (with generator mounted)
  • Heats repair area of 30 square feet
  • Generator requirement 45 kilowatts
  • Custom industrial heating elements
  • Cycle times of approximately 20 - 40 minutes depending on depth and weather conditions
  • Fuel consumption approximately 2.8 gallons of fuel per hour
  • Heavy duty steel constructed frame
  • Top wind 7,000 lbs. jacks
  • Six inches of heat resistance insulation
  • Heavy duty high temperature powder coated finish for maximum durability and visibility
  • Heavy duty steel attachment plate for skid steers or forklifts

Heatwurx AP-40 - Asphalt Processor

The HEATWURX™ HWX-AP40 Asphalt Processor is powered by an orbital hydraulic motor and has a 40 inch working width. Designed to process and rejuvenate existing asphalt in place, it processes, remixes, and levels the heated, rejuvenated asphalt to the desired depth, ready for compaction. It is designed to easily attach to a skid steer and has custom beveled tines to provide a seamless bond between the repaired area and existing pavement. The HEATWURX™ HWX-AP40 Asphalt Processor specifications are as follows:

  • One inch wear plate with ability to adjust to desired depth
  • Orbital hydraulic motor
  • 40” working width
  • 5/16 inch processing blades
  • Custom beveled cutting blades tooling to maximize asphalt bonding
  • 12 gauge wings to funnel material into desired location

Company History

Heatwurx, Inc. was incorporated under the laws of the State of Delaware on March 29, 2011 as Heatwurxaq, Inc. and subsequently changed its name to Heatwurx, Inc. on April 15, 2011. Our founders were Larry Griffin and David Eastman, the principals of Hunter Capital Group, LLC, an investment banking entity, which acquired our technology, equipment designs, trademarks, and patent applications from Richard Giles, the inventor and a founder of the Company in April 2011.

Competitive Environment

Potholes occur on asphalt-surfaced pavements that are subjected to a broad spectrum of traffic levels, from two-lane rural routes to multi-lane interstate highways. Any agency responsible for asphalt-surfaced pavements eventually performs pothole patching or repair. Pothole patching or repair is generally performed either as an emergency repair under harsh conditions, or as routine maintenance scheduled for warmer and drier periods. Pothole patching and repair can be performed during various weather conditions.

In most cases, the public likes all potholes to be patched or repaired promptly and forms a negative opinion of the agency when this fails to happen in a timely manner.

Potholes are generally caused by moisture, freeze-thaw cycle, traffic, poor underlying support, or some combination of these factors. Pothole patching or repair is necessary in those situations where potholes compromise safety and cause damage to vehicles.

In general, the competitive environment for asphalt patching and repair is fragmented. Numerous entities including contractors, municipalities and others provide services to repair roads. However, there are a number of generally accepted methods of repairing and patching asphalt that our process competes against which are listed below under, “Examples of Asphalt Repair and Patching Techniques”.

Examples of Asphalt Repair and Patching Techniques

The following techniques and asphalt repair methods have been documented by the Transportation Research Board as part the Strategic Highway Research Program (“SHRP”). The Federal Highway Association Long Term Pavement Performance (“LTPP”) program conducted five years of additional research on pothole repair, providing guidelines and recommendations to assist highway maintenance agencies and other related organizations in planning, constructing, and monitoring the performance of pothole repairs in asphalt-surfaced pavements.

Throw-and-Roll

Many maintenance agencies use the “throw-and-roll” method for patching potholes. It is the most commonly used method because of its high rate of production.

The throw-and-roll method consists of the following steps:

1. Shovel the hot asphalt into a pothole (which may or may not be filled with water or debris).

2. Drive over the asphalt using the truck tires to compact.

3. Move on to the next pothole.

One difference between this method and the traditional throw-and-go method is that some effort is made to compact the patches. Compaction provides a tighter patch for traffic than simply leaving loose material. The extra time to compact the patches (generally one to two additional minutes per patch) will not significantly affect productivity.

This is especially true if the areas to be patched are separated by long distances and most of the time is spent traveling between potholes.

Crack Sealing

Crack sealing is utilized by agencies, parking lot owners and homeowners to seal cracks in asphalt pavement to prevent water and other debris from penetrating the asphalt and causing further damage during the freeze and thaw cycles. This method is preventative and not suitable for repairing or patching potholes.

The process for sealing cracks consists of the following steps:

1. Clean the surface of the area to be sealed and let dry.

2. Heat the sealing material to 300° to 400° Fahrenheit.

3. Pour the heated material into the crack.

4. Let cool and dry.

5. Place a layer of sand over the sealing material to prevent tracking by vehicle tires.

Spray Injection Patching

The spray injection repair technique is performed by spraying heated aggregate (minerals such as sand, gravel, or crushed stone) into the area to be repaired. This repair method requires a truck to haul the replacement asphalt and specialized machinery to heat and disperse.

The spray-injection procedure consists of the following steps:

1. Blow water and debris from the pothole with a high-pressure air blower.

2. Spray a generous layer of binder (asphalt-cement) on the sides and bottom of the pothole.

3. Blow heated aggregate (minerals such as sand, gravel or crushed stone) and asphalt-cement (binder) into the pothole.

4. Cover the patched area with a layer of dry aggregate (minerals).

This procedure process does not include compaction of the repaired area.

Semi-Permanent Repair (Saw cut)

Many agencies employ semi-permanent repair methods such as saw cutting. This method represents an increased level of effort for repairing potholes. This increased effort increases the performance of the repair by improving the underlying and surrounding support provided for the repair. It also raises the cost, due to the increased labor required and the amount of time the repair takes.

The semi-permanent repair method has traditionally been considered one of the best for repairing potholes, short of full-depth removal and replacement. This procedure includes the following steps:

1. Remove water and debris from the pothole.

2. Using a radial saw with a hardened blade, cut the repair area on four sides creating a square or rectangle.

3. Remove the material inside the section that was cut.

4. Shovel hot asphalt into the repair area. Spread with an asphalt rake to proper grade.

5. Compact with a vibrating drum roller or vibrating plate compactor.

This repair procedure results in a tightly compacted repair. However, it requires more workers and equipment and has a lower productivity rate than both the throw-and-roll and the spray-injection procedure.

Intellectual Property

We currently have three issued U.S. patents: two utility patents and one design patent. We have four pending U.S. patent applications.

Our two issued utility patents, US Patent Nos. 8,562,247 and 8,556,536, were issued in October 2013 and cover certain unique device aspects of our asphalt repair equipment. Our design patent, US Patent No. D700,633, was issued in March 2014 and covers the ornamental design of our asphalt processor.

We have received a notice of allowance from the US Patent and Trademark Office (“USPTO”) on a third utility patent covering certain unique method aspects of our asphalt repair equipment. We anticipate issuance of this patent in June 2014.

Our patent application, entitled, “System and Method for Sending and Managing Pothole Location and Pothole Characteristics” was filed in January 2013; no substantive action has been received from the USPTO.

Our patent application, entitled, “System and Method for Controlling an Asphalt Repair Apparatus” was filed in February 2013; the USPTO rejected the application based on prior art referenced by the examiner. Our response to the rejection is due by March 20, 2014. We expect to file a response which argues that the invention as claimed is patentable over the cited prior art.

Our patent application, entitled, “Asphalt Brick Device and Method of Making Same” was filed in June 2013; no substantive action has been received from the USPTO.

We intend to develop other technologies for which we will seek patent protection. In addition, we have made and expect to continue to make certain international filings to attempt to protect our intellectual property rights in a limited number of countries outside of the United States. However, we do not have any assurance that our current pending patent applications will be granted or that we will be able to develop future patentable technologies. We do not believe our ability to operate our business is dependent on the patentability of our technology.

Governmental Regulation

We do not manufacture our own equipment nor do we utilize our own equipment to perform road repair. It will be up to the manufacturer as well as the end-users to comply with any governmental regulations. To the extent that any regulations require changes to our equipment, we will have to comply or risk losing the customers. See “Risk Factors” for a discussion relating to compliance with government regulations.

As part of our sales operations, we hire drivers with Commercial Driver’s Licenses (CDL’s) to transport our asphalt repair equipment across the country to demonstrate the effectiveness of our equipment to potential clients. As such, we are a motor carrier subject to regulation by the U.S. Department of Transportation (DOT) and the Federal Motor Carrier Safety Administration (FMCSA), and certain business is also subject to state rules and regulations. The DOT periodically conducts reviews and audits to ensure our compliance with federal safety requirements, and we report certain accident and other information to the DOT. Our operations into and out of Canada is subject to regulation by those countries.

In 2011, the FMCSA amended the hours-of-service (“HOS”) safety requirements for commercial truck drivers. The remaining provisions of the HOS Final Rule became effective July 1, 2013. While we continue to evaluate and adjust to the impact of the Final Rule on various segments of our operations, we do not anticipate a negative impact on our operations or productivity.

In 2011, the FMCSA published a Notice of Proposed Rulemaking to require currently logging drivers to complete their logs using an Electronic On-Board Recorder (“EOBR”). The final rule regarding this proposal is expected to be published in the first quarter of 2014. Since the issuance of this proposal, we have been reviewing our small fleet and are developing a plan to replace any legacy on-board recording equipment within our fleet. We do not anticipate a negative impact on our operations or productivity.

In 2013, the FMCSA, in conjunction with the National Highway Traffic Safety Administration, submitted a Notice of Proposed Rulemaking to require the installation of speed-limiting devices on heavy trucks. The final rule regarding this proposal is expected to be published in the third quarter of 2014. We believe this rule will have minimal implementation cost due to the small size of our fleet. We do not anticipate a negative impact on our operations or productivity.

In February 2014, the FMCSA published a Notice of Proposed Rulemaking establishing a Commercial Driver’s License Drug and Alcohol Clearinghouse. This rule will establish a database of commercial driver´s license holders that have failed or refused a controlled substance or alcohol test. The rule will require carriers to report positive test results and refusals to test into the Clearinghouse and query the database when hiring drivers. We do not anticipate that the establishment of the Clearinghouse will have a meaningful impact on our driver hiring process.

We continue to monitor the actions of the FMCSA and other regulatory agencies and evaluate all proposed rules to determine their impact on our operations.

Employees

As of March 27, 2014, we had seven full-time employees and one part-time employee.

Competition

According to the 2011 IBIS World Report on US Road and Highway Maintenance, the total spent on road maintenance in the United States is in excess of $30 billion per year. As an emerging company, we are at a competitive disadvantage because we do not have the financial resources of larger, more established competitors, nor do we have a sales force large enough to challenge our competitors. We intend to address this disadvantage by entering into distribution agreements with larger companies, and providing education and training to our sales partners, customers, and governmental agencies. We also believe that our equipment and processes are better than what is offered by other companies, and that purchasers will choose our equipment because of its effectiveness, quality of design, reputation in the marketplace, as well as the recognition we have received from state and federal agencies. We intend to offer an industry standard one-year limited warranty and provide nationwide service though our Original Equipment Manufacturing (“OEM”) partners and resellers. See “Risk Factors” for a discussion of the risks associated with our company.

Risk factors

As filed, 38,210 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

An investment in our common stock and warrants involves a high degree of risk. Investors should carefully consider the risks described below, together with all of the other information included in this report, before making an investment decision. If any of the following risks actually occurs, our business, financial condition, and/or results of operations could suffer. In that case, the trading price of our shares of common stock and warrants could decline, and investors may lose all or part of their investment. Investors should read the section entitled “Cautionary Note Regarding Forward-Looking Statements” above for a discussion of what types of statements are forward-looking statements, as well as the significance of such statements in the context of this report.

Risks Relating to the Company’s Business

We have a limited operating history and there can be no assurance that we can achieve or maintain profitability. We will need significant additional financing to maintain current operations. Our ability to obtain additional financing is very limited. These issues raise substantial doubt as to our ability to continue as a going concern.

We have a limited operating history, and the likelihood of our success must be evaluated in light of the problems, expenses, complications and delays that we may encounter because we are a small business. As a result, we may not be profitable and we may not be able to generate sufficient revenue to develop as we have planned.

Our ability to achieve and maintain profitability and positive cash flow is currently dependent upon and will continue to be dependent upon:

  • the market’s acceptance of our equipment;
  • our ability to keep abreast of the changes by government agencies and in laws related to our business, particularly in the areas of intellectual property and environmental regulation;
  • our ability to maintain any competitive advantage via patents, if attainable, or protection of our intellectual property and trade secrets;
  • our ability to attract customers who require the products we offer;
  • our ability to generate revenues through the sale of our products to potential customers; and
  • our ability to manage the logistics and operations of the Company and the distribution of our products and services.

If we are unable to successfully manage these aspects of our business, our business, financial condition, and/or results of operations could suffer, the trading price of our shares of common stock and warrants could decline, and investors may lose all or part of their investment.

We have incurred significant operating losses since formation and our independent accountants have issued a going concern opinion with respect to our financial statements as of and for the years ended December 31, 2013 and 2012. We expect to continue to incur significant net losses for the foreseeable term and we will not be able to attain a level of profitability sufficient to sustain operations without additional sources of capital.

We have limited sales and a history of substantial operating losses. We reported a net operating loss for the period from incorporation on March 29, 2011 to December 31, 2013. We also had an accumulated deficit of approximately $6,814,000 at December 31, 2013. In order to achieve profitable operations we need to secure sufficient sales of our preservation and repair equipment. Our potential customers are federal, state, and local governmental entities, pavement contractors, equipment distributors and original equipment manufacturers. We cannot be certain that our business will be successful or that we will generate significant revenues and become profitable. If we are unable to achieve profitability or locate alternate sources of capital, we may be forced to cease operations.

As of December 31, 2013, we had approximately $187,000 cash on hand. We are solely reliant on raising additional capital to maintain current operations. To date we have been able to raise debt and equity financing through the assistance of a small number of our investors who have been substantial participants in our debt and equity offerings since our formation. If these investors choose not to assist the Company with its capital raising initiatives in the future we do not expect that we would be able to obtain any alternative forms of financing at this time.

Successful completion of the Company’s development program and its transition to profitable operations is dependent upon obtaining additional financing adequate to fulfill its development and commercialization activities, and achieve a level of revenues adequate to support the Company’s cost structure. Many of the Company’s objectives to establish profitable business operations rely upon the occurrence of events outside its control; there is no assurance that the Company will be successful in accomplishing these objectives.

The issues described above raise substantial doubt about the Company’s ability to continue as a going concern. The Company’s independent accounting firm has included an explanatory paragraph in its audit opinion describing this condition. Management of the Company intends to address these issues by raising additional capital through private placements. There can be no assurance that the Company will be able raise additional capital.

At inception, our business essentially consisted of the investment in in-process research and development as we refer to as the “asphalt preservation and repair solution”. The company now classifies the asset as developed technology and it is amortized over the estimated life of the asset. The developed technology is subject to an annual review to test for impairment. If the asset was determined to be impaired this could have a negative impact on our business and results of operations.

Our inability to achieve significant sales of our asphalt preservation and repair equipment could require us to take a material impairment charge related to our intangible assets. Our intangible assets are tested for impairment at least annually in accordance with U.S. GAAP. The valuation of intangible assets require assumptions and estimates of many critical factors, including revenue and market growth, operating cash flows, market multiples, and discount rates. Our inability to sell our asphalt preservation and repair equipment could cause a significant reduction in the fair market value of our intangible assets, resulting in an impairment charge. Given the significance of our intangible asset balance, as a percentage of our total asset balance, any impairment charge could be material to our operating results and related financial statements.

We currently have a single manufacturer of our equipment. If our manufacturing partner chooses not to manufacture our equipment or is otherwise unable to timely manufacture our equipment, we may not be able to locate another manufacturing partner in a timely manner to satisfy future demand for our products.

We currently have only one manufacturing partner, Boman Kemp, a Utah-based company. We do not currently have a formal agreement with our manufacturing partner, who is free to discontinue manufacturing services for us or to increase prices charged to us. This arrangement is adequate for the near term as we do not have a large number of customer orders and do not have any urgent need for equipment. However, we anticipate that as our business grows, we will contract with additional manufacturing partners to protect us against business interruptions related to having a sole manufacturing partner. If we experience any business interruption in our manufacturing partner’s business or if our manufacturing partner decides to discontinue manufacturing for us on mutually agreeable terms, we may be unable to meet commitments to existing customers or attract new ones.

We are developing our warranty policies. If we begin selling a material amount of equipment, we will need to formalize our warranty polices with our suppliers and our customers. If we are unable to negotiate favorable warranty terms with our suppliers or, if our suppliers experience financial difficulties, we may have a material warranty obligation.

We have sold a limited number of units to date. We intend to offer an industry standard one-year limited warranty and provide nationwide service though our OEM partners and resellers. Although we anticipate that the majority of the warranty items will be passed through from the OEM partners and resellers through us and ultimately to the manufacturer, there are some parts on our equipment which will not be the responsibility of the manufacturer such as the heating elements on our HWX-30 electrically powered infrared heaters. We will need to provide industry standard warranties on these parts as well. In addition, if our manufacturing partner experiences financial difficulty we may have additional warranty exposure to the end customers. If we have ultimate liability under any warranty claims, our financial position would be impacted and we may not be able to continue operations.

The growth of our business depends upon the development and successful commercial acceptance of our products. If we are unable to achieve successful commercial acceptance of our product, our business, financial condition, and/or results of operations could suffer.

We depend upon a variety of factors to ensure that our preservation and repair equipment is successfully commercialized, including timely and efficient completion of design and development, implementation of manufacturing processes, and effective sales, marketing, and customer service. Because of the complexity of our products, significant delays may occur between development, introduction to the market and volume production phases.

The development and commercialization of our preservation and repair equipment involves many difficulties, including:

  • retention and hiring of appropriate operational, research and development personnel;
  • determining the products’ technical specifications;
  • successful completion of the development process;
  • successful marketing of the preservation and repair equipment and achieving customer acceptance;
  • establishing, managing and maintaining key reseller relationships;
  • producing products that meet the quality, performance and price expectations of our customers;
  • developing effective sales, advertising and marketing programs; and
  • managing additional customer service and warranty costs associated with supporting product modifications and/or subsequent potential field upgrades.

If we are unable to achieve successful commercial acceptance of our product, we may be unable to generate sufficient revenues to sustain operations and may be forced to cease operations.

We and our customers may be required to comply with a number of laws and regulations, both foreign and domestic, in the areas of safety, health and environmental controls. Failure to comply with government regulations could severely limit our sales opportunities and future revenues.

We intend to market our preservation and repair equipment domestically and internationally. We may be required to comply with local and international laws and regulations and obtain permits when required. We also cannot be certain that we will be able to obtain or maintain, required permits and approvals, that new or more stringent environmental regulations will not be enacted or that if they are, that we will be able to meet the stricter standards.

Failure to obtain operating permits, or otherwise to comply with federal and state regulatory and environmental requirements, could affect our abilities to market and sell our preservation and repair equipment and could have a material adverse effect on our business, financial condition, and/or results of operations, the trading price of our shares of common stock and warrants could decline, and investors may lose all or part of their investment.

Our ability to grow the business depends on being able to demonstrate our equipment to potential customers and distributors and train them on proper usage. If we do not add more demonstration teams, our growth may be limited geographically.

Our current marketing efforts utilize two driver/trainers that transport our equipment to potential customers and distributors to demonstrate the value of our equipment and train them on the process. This team can travel approximately 1,000 miles in any direction to conduct the demonstrations and training. These efforts are very time-consuming and with high gas prices, very expensive. In order to overcome the natural geographic limitations, we intend to deploy demonstration equipment throughout the country and hire and train additional driver/trainers. These efforts will be dependent upon our ability (i) to raise capital to purchase and/or lease new demonstration equipment and (ii) to locate and hire qualified personnel. If we cannot raise additional capital or locate qualified personnel, it will be much more difficult to grow our business. If that happens, our stock and warrant price may decline and our investors may lose all or a part of their investment.

Commodity or component price increases and/or significant shortages of component products may erode our expected gross profit on sales and adversely impact our ability to meet commitments to customers.

We require steel for the manufacture of our products. Accordingly, increases in the price of steel could significantly increase our production cost. If we were unable to fully offset the effect of any such increased costs through price increases, productivity improvements, or cost reduction programs, our expected gross profit on sales would decline.

We also rely on suppliers to secure component products required for the manufacture of our products. We have no assurance that key suppliers will be able to increase production in a timely manner in the event of an increase in the demand for our products. A disruption in deliveries to or from suppliers or decreased availability of components could have an adverse effect on our ability to meet our commitments to customers or increase our operating costs. If component supply is insufficient for the demand for our products, we may be unable to meet commitments to existing customers or attract new ones.

Our business is subject to the risk that our customers and/or other companies will produce their own version of our equipment which could significantly reduce our expected product sales.

We intend to sell finished products through an independent reseller network and directly to OEMs. Some of our potential customers are OEMs that currently manufacture or could in the future manufacture their own products. Despite their manufacturing abilities, we believe that these customers have chosen to purchase from us due to the quality of our products and to reduce their production risks and maintain their company focus. There is also the risk that other companies will copy our equipment and will become our competitors. However, we have no assurance that these customers will place significant equipment orders with us or continue to outsource manufacturing in the future. Our sales would decline and our profit margin would suffer if our potential customers decide to produce their own version of our products or there is increased competition from other manufacturers.

Our future success is dependent, in part, on the performance and continued service of our key management personnel. Without their continued service, we may be forced to interrupt or cease operations.

We are presently dependent to a great extent upon the experience, abilities and continued services of our executive officers, who are all at-will employees. Our executive team is responsible for the development, and execution of our strategic vision. Our management team has cultivated significant relationships in our industry that are critical to our success. As we grow and more people are added to the team over time, management will share their knowledge of our company and the industry with new hires, and we will not be dependent upon any one individual. However, until we achieve more significant growth as a company, there is a disproportionate dependence upon our executive management team, and the loss of their services could significantly impair our business operations. Some companies reduce the risk of the loss of key individuals by purchasing life insurance policies that pay the company upon the death of key personnel. We do not have a key man life insurance policy on our executive management personnel and do not intend to purchase one. If we interrupt or cease operations due to the loss of an executive officer’s availability, we may be unable to service our existing customers or acquire new customers, and our business may suffer and our stock and warrant prices may decline.

The success of our business depends upon our ability to attract, retain and motivate highly skilled employees. If we experience any adverse outcome in such matters, our ability to grow and manage our business may suffer.

We currently rely upon outside consultants for many aspects of our operations. Our ability to execute our business plan and be successful depends upon our ability to attract, retain and motivate highly skilled employees. As we expand our business, we will need to hire additional personnel to support our operations. We may be unable to retain our key employees or attract other highly qualified employees in the future. If we fail to attract new personnel with the requisite skills and industry knowledge we will need to execute against our business plan, our business, financial condition, and/or results of operations could suffer.

The success of our business depends, in part, upon our infrared heating process, our asphalt processing/tilling procedure and technical information which may be difficult to protect and may be perceived to infringe on the intellectual property rights of third parties. If we are unable to protect our products from being copied by others it may negatively impact our expected sales. Claims by others of infringement could prove costly to defend and if we are unsuccessful we could be forced into an expensive redesign of our products.

Our success depends, in part, on our ability to obtain patents, and operate without infringing on the proprietary rights of third parties. We cannot assure that:

  • the patents of others will not have an adverse effect on our ability to conduct our business;
  • our patents will be issued;
  • our patents, if issued, will provide us with competitive advantages;
  • patents, if issued, will not be challenged by third parties;
  • we will develop additional proprietary technology that is patentable; or
  • others will not independently develop similar or superior technologies, duplicate elements of our preservation and repair equipment or design around it.

In the future, we may be accused of patent infringement by other companies. To defend and/or settle such claims, we may need to acquire licenses to use, or to contest the validity of, issued or pending patents. We cannot assure that any license acquired under such patents would be made available to us on acceptable terms, if at all, or that we would prevail in any contest regarding the issued or pending patents of others. In addition, we could incur substantial costs in defending ourselves in suits brought against us for alleged infringement of another party's patents or in defending the validity or enforceability of our patents, if any, or in bringing patent infringement suits against other parties based on our patents. Any negative outcome of a patent infringement case or failure to obtain license agreements would necessitate the need to redesign our products, which creates added expense. Such redesigned products may not be accepted in the market place and we may not be able to continue our operations.

Because we are smaller and have fewer financial and other resources than many other companies that manufacture and sell equipment for road repair work, we may not be able to successfully compete in the very competitive road repair work equipment industry.

There are over eleven million miles of paved roadways throughout the world. There is significant competition among companies that manufacture and sell equipment to repair existing roadways. Our business faces competition from companies that are much more connected to the decision-makers, have been in business for a longer period of time, and have the financial and other resources that would enable them to invest in new technologies if they chose to. These companies may be able to achieve substantial economies of scale and scope, thereby substantially reducing their costs and the costs to their customers. If these companies are able to substantially reduce their marginal costs, the market price to the customer may decline and we may be not be able to offer our preservation and repair equipment at a price that allows us to compete economically. Even if we are able to operate profitably, these other companies may be substantially more profitable than us, which may make it more difficult for us to raise any financing necessary for us to achieve our business plan and may have a materially adverse effect on our business.

Mergers or other strategic transactions involving our competitors could weaken our competitive position, which could harm our operating results. If our competitors merge or are involved in other strategic transactions that place us at a disadvantage in the marketplace, our results of operations could decline.

Some of our competitors may enter into new alliances with each other or may establish or strengthen cooperative relationships. Any consolidation, acquisition, alliance or cooperative relationship could lead to pricing pressure and could result in a competitor with greater financial, technical, marketing, service and other resources which could result in a loss of our expected market share. If this occurs, our results of operations could decline.

Our long-term plan depends, in part, on our ability to expand the sales of our products to customers located outside of the United States and, accordingly, our business will be susceptible to risks associated with international operations. If we are unable to successfully manage the risks involved in international operations, the expected growth of our business may be negatively impacted.

We have no experience operating in foreign jurisdictions. We continue to explore opportunities outside of North America. Our lack of experience in operating our business outside of North America increases the risk that our current and any future international expansion efforts will not be successful. Conducting international operations subjects us to new risks that, generally, we do not face in the United States, including:

  • fluctuations in currency exchange rates;
  • unexpected changes in foreign regulatory requirements;
  • longer accounts receivable payment cycles and difficulties in collecting accounts receivable;
  • difficulties in managing and staffing international operations;
  • potentially adverse tax consequences, including the complexities of foreign value added tax systems and restrictions on the repatriation of earnings;
  • localization of our solutions, including translation into foreign languages and associated expenses;
  • the burdens of complying with a wide variety of foreign laws and different legal standards, including laws and regulations related to privacy;
  • increased financial accounting and reporting burdens and complexities;
  • political, social and economic instability abroad, terrorist attacks and security concerns in general; and
  • reduced or varied protection for intellectual property rights in some countries.

If we fail to manage the risks associated with international operations, expected international sales may not materialize or may not prove to be as profitable as anticipated.

We may be sued by claimants that allege that they were injured due to our equipment. Our business will be negatively impacted if we do not have sufficient insurance to protect us against these claims.

Any business today is at risk of becoming involved in lawsuits. It is extremely difficult to identify all possibly claims that could be made against us based on our business, but to name a few, we may be sued by drivers that claim that roads repaired by our equipment caused them to get into an automobile accident. Or a worker using our equipment to repair a road may claim that he or she was injured by our equipment. These claims may or may not be meritorious. In any event, we will attempt to protect ourselves against these claims by purchasing general liability insurance. There can be no assurance that we will be able to obtain the insurance or that it will be sufficient to protect us against future claims. Further, even if we obtain insurance, some of the litigation claims may not be covered under our insurance policies, or our insurance carriers may seek to deny coverage. As a result, we might also be required to incur significant legal fees with no assurance of outcome, and we may be subject to adverse judgments or settlements that could significantly impair our ability to operate.

We may not maintain sufficient insurance coverage for the risks associated with our business operations. Accordingly, we may incur significant expenses for uninsured events and our business, financial condition and results of operations could be materially and adversely affected.

Risks associated with our business and operations include, but are not limited to, claims for wrongful acts committed by our officers, directors, employees and other representatives, the loss of intellectual property rights, the loss of key personnel and risks posed by natural disasters. Any of these risks may result in significant losses. We do not carry business interruption insurance. In addition, we cannot provide any assurance that our insurance coverage is sufficient to cover any losses that we may sustain, or that we will be able to successfully claim our losses under our insurance policies on a timely basis or at all. If we incur any loss not covered by our insurance policies, or the compensated amount is significantly less than our actual loss or is not timely paid, our business, financial condition and results of operations could be materially and adversely affected.

We have raised substantial amounts of capital in private placements and if it is determined that we failed to comply with applicable securities laws, we could be subject to rescission claims or lawsuits that could severely damage our financial position.

We have offered and sold securities in private placements to investors pursuant to certain exemptions from the registration requirements of the Securities Act of 1933, as well as those of various state securities laws. Such exemptions are highly technical in nature and the basis for relying on such exemptions is factual; that is, the applicability of such exemptions depends upon our conduct and that of those persons contacting prospective investors and making the offering. We have not received a legal opinion to the effect that any of our prior offerings were exempt from registration under any federal or state law. Instead, we have relied upon the operative facts as the basis for such exemptions, including information provided by investors themselves. If any prior offerings did not qualify for such exemption, an investor would have the right to rescind its purchase of the securities if it so desired. If investors were successful in seeking rescission, we would face severe financial demands that could adversely affect our business and operations. Additionally, if we did not in fact qualify for the exemptions upon which it has relied, we may become subject to significant fines and penalties imposed by the Securities and Exchange Commission and state securities agencies.

Risks Related to our Common Stock and Warrants:

The exercise of our warrants and options may result in a dilution of our current stockholders' voting power and an increase in the number of shares eligible for future resale in the public market which may negatively impact the trading price of our shares of common stock and warrants.

The exercise of some or all of our outstanding warrants and options could significantly dilute the ownership interests of our existing stockholders. As of December 31, 2013 we have outstanding warrants to purchase an aggregate of 363,824 shares of common stock, we anticipate having outstanding warrants to purchase an aggregate of 1,386,176 shares of common stock, including (i) the warrant to purchase 386,176 shares of common stock issued in conjunction with the follow-on Series D Unit offering and (ii) the warrants to purchase 1,000,000 shares of common stock issued pursuant to the $3,000,000 debt offering, see Note 13 for further discussion. Additionally, the issuance of up to 1,320,000 shares of common stock upon exercise of stock options and 1,440,000 performance stock options outstanding as of December 31, 2013 will further dilute our existing stockholders’ voting interest. To the extent warrants and/or options are exercised, additional shares of common stock will be issued, and such issuance will dilute existing stockholders.

In addition to the dilutive effects described above, the exercise of those securities would lead to an increase in the number of shares eligible for resale in the public market. Substantial dilution and/or a substantial increase in the number of common shares available for future resale may negatively impact the trading price of our shares of common stock and warrants.

An active, liquid and orderly trading market for our common stock and warrants may not develop and the trading price of our common stock and warrants may be volatile. If an orderly trading market for our common stock and warrants does not develop and/or if the trading price for our common stock and warrants is volatile, the trading price of our shares of common stock and warrants will likely result in higher spreads.

Our common stock is trading in the over-the-counter market and is quoted on the OTCQB. The over-the-counter market for securities has historically experienced extreme price and volume fluctuations during certain periods. These broad market fluctuations and other factors, such as our ability to implement our business, as well as economic conditions and quarterly variations in our results of operations, may adversely affect the market price of our common stock. In addition, the spreads on stock traded through the over-the-counter market are generally unregulated and higher than on stock exchanges, which means that the difference between the price at which shares could be purchased by investors on the over-the-counter market compared to the price at which they could be subsequently sold would be greater than on these exchanges. Significant spreads between the bid and asked prices of the stock could continue during any period in which a sufficient volume of trading is unavailable or if the stock is quoted by an insignificant number of market makers. We cannot insure that our trading volume will be sufficient to significantly reduce this spread, or that we will have sufficient market makers to affect this spread. These higher spreads could adversely affect investors who purchase the shares at the higher price at which the shares are sold, but subsequently sell the shares at the lower bid prices quoted by the brokers. Unless the bid price for the stock increases and exceeds the price paid for the shares by the investor, plus brokerage commissions or charges, the investor could lose money on the sale. For higher spreads such as those on over-the-counter stocks, this is likely a much greater percentage of the price of the stock than for exchange listed stocks. There is no assurance that at the time the investor wishes to sell the shares, the bid price will have sufficiently increased to create a profit on the sale. We do not anticipate that there will be any public trading market for the warrants.

We are an “emerging growth company” and we cannot be certain if the reduced disclosure requirements applicable to emerging growth companies will make our common stock and warrants less attractive to investors.

We are an “emerging growth company,” as defined in the JOBS Act, and we may take advantage of certain exemptions from various reporting requirements that are applicable to other public companies that are not “emerging growth companies” including, but not limited to, not being required to comply with the auditor attestation requirements of Section 404 and reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements. We cannot predict if investors will find our common stock and warrants less attractive if we rely on these exemptions. If some investors find our common stock and warrants less attractive as a result, there may be a less active trading market for our common stock and warrants, their respective prices may be more volatile.

Ownership of our common shares is concentrated and investors will have minimal influence on stockholder decisions.

As of December 31, 2013, our executive officers, directors, and a small number of investors, beneficially owned an aggregate of 7,445,519 shares of common stock and/or preferred stock convertible into common stock, representing approximately 79% of the voting power of our then-outstanding capital stock. As a result, our existing officers, directors, and such investors could significantly influence stockholder actions of which other investors disapprove or that are contrary to their interests. This ability to exercise significant influence could prevent or significantly delay another company from acquiring or merging with us and the trading price of our shares of common stock and warrants could decline, and, accordingly, investors may lose all or part of their investment.

Securities analysts may not cover our common stock and this may have a negative impact on the market price of our common stock and warrants.

The trading market for our common stock and warrants may depend on the research and reports that securities analysts publish about us or our business. We do not have any control over these analysts. There is no guarantee that securities analysts will cover our common stock. If securities analysts do not cover our common stock, the lack of research coverage may adversely affect the market price of our common stock and warrants. If we are covered by securities analysts, and our stock is downgraded, the price of our stock and warrants would likely decline. If one or more of these analysts ceases to cover us or fails to publish regularly reports on us, we could lose or fail to gain visibility in the financial markets, which could cause a decline in our stock and warrant price and/or trading volume, and, accordingly, investors may lose all or part of their investment.

The application of the Securities and Exchange Commission’s “penny stock” rules to our common stock could limit trading activity in the market, and our stockholders may find it more difficult to sell their stock.

If our common stock trades at less than $5.00 per share, then it will be subject to the Securities and Exchange Commission’s (“SEC”) penny stock rules. Penny stocks generally are equity securities with a price of less than $5.00. Penny stock rules require a broker-dealer, prior to a transaction in a penny stock not otherwise exempt from the rules, to deliver a standardized risk disclosure document that provides information about penny stocks and the risks in the penny stock market. The broker-dealer also must provide the customer with current bid and offer quotations for the penny stock, the compensation of the broker-dealer and its salesperson in the transaction, and monthly account statements showing the market value of each penny stock held in the customer’s account. The broker-dealer must also make a special written determination that the penny stock is a suitable investment for the purchaser and receive the purchaser’s written agreement to the transaction. These requirements may have the effect of reducing the level of trading activity, if any, in the secondary market for a security that becomes subject to the penny stock rules. The additional burdens imposed upon broker-dealers by such requirements may discourage broker-dealers from effecting transactions in our securities, which could severely limit their market price and liquidity of our securities. These requirements may restrict the ability of broker-dealers to sell our common stock and may affect investors’ ability to resell our common stock which may depress the market price of our common stock and warrants and, accordingly, investors may lose all or part of their investment.

We do not intend to pay dividends on common stock for the foreseeable future, and investors must rely on increases in the market prices of our common stock and warrants for returns on their investment.

For the foreseeable future, we intend to retain any earnings to finance the development and expansion of our business, and we do not anticipate paying any cash dividends on our common stock. Accordingly, investors must be prepared to rely on sales of their common stock and warrants after price appreciation to earn an investment return, which may never occur. Investors seeking cash dividends should not purchase our common stock. Any determination to pay dividends in the future will be made at the discretion of our Board of Directors and will depend on our results of operations, financial condition, contractual restrictions, restrictions imposed by applicable law and other factors our Board of Directors deems relevant.

Properties

As filed, 240 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Our executive offices are located in Greenwood Village, Colorado, where we lease 2,244 square feet of office space. We currently outsource our manufacturing to, Boman Kemp, which provide production and warehousing facilities in Ogden, Utah.

As filed, 686 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

The Company faces exposure to various legal claims in the ordinary course of business. We maintain insurance policies in the amounts and with coverage and deductibles as we believe reasonable and prudent. However, we cannot be assured that the insurance companies will promptly honor their policy obligations or that the coverage or levels of insurance will be adequate to protect us from all material expenses related to future claims. We are not currently involved in any material legal proceedings, directly or indirectly, and we are not aware of any claims pending or threatened against us or any of the directors that could result in the commencement of material legal proceedings.

Management's discussion and analysis

As filed, 19,375 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Heatwurx, Inc. was incorporated under the laws of the State of Delaware on March 29, 2011 as Heatwurxaq, Inc. and subsequently changed its name to Heatwurx, Inc. on April 15, 2011. We have not yet commercialized our products and we are therefore classified as a development stage enterprise.

We are an asphalt preservation and repair equipment company. Our innovative, and eco-friendly hot-in-place recycling process corrects surface distresses within the top 3 inches of existing pavement by heating the surface material to a temperature between 350° and 400° Fahrenheit with our electrically powered infrared heating equipment, mechanically loosening the heated material with our processor/tiller attachment that is optimized for producing a seamless repair, and mixing in additional recycled asphalt pavement and a binder (asphalt-cement), and then compacting repaired area with a vibrating roller or compactor. We consider our equipment to be eco-friendly as the Heatwurx process reuses and rejuvenates distressed asphalt, uses recycled asphalt pavement for filler material, eliminates travel to and from asphalt batch plants, and extends the life of the roadway. We believe our equipment, technology and processes provide savings over other processes that can be more labor and equipment intensive.

Our hot-in-place recycling process and equipment has been selected by the Technology Implementation Group of the American Association of State Highway Transportation Officials (“AASHTO TIG”) as an “additionally Selected Technology” for the year 2012. We develop, manufacture and intend to sell our unique and innovative and eco-friendly equipment to federal, state and local agencies as well as contractors for the repair and rehabilitation of damaged and deteriorated asphalt surfaces.

This Item 7 may contain forward-looking statements that involve substantial risks and uncertainties. When considering these forward-looking statements investors should keep in mind the cautionary statements in this report. Please see the sections entitled “Cautionary Notice Regarding Forward-Looking Statements” and Item 1A. “Risk Factors” elsewhere in the report.

Results of operations for the year ended December 31, 2013 compared to year ended December 31, 2012.

For the year ended December 31, 2013, our net loss was $3,069,000, compared to a net loss of $2,441,000, for the year ended December 31, 2012. Further description of these losses is provided below.

Revenue

Revenue increased to approximately $312,000 for the year ended December 31, 2013 from approximately $192,000 for the year ended December 31, 2012. Revenue is generated from the sale of our equipment as well as the sale of consumable products. Our consumables consist of Polymer pellets used to strengthen the repair when mixed in to the recycled asphalt product; and RxEHAB rejuvenation strips which is an oil-based product which creates the binding agent for the asphalt repair.

Given we are still in a start-up stage, sales of our equipment have not been material to date. Accordingly, for accounting purposes we consider ourselves to be a development stage company.

Cost of goods sold

Cost of goods sold increased to approximately $188,000 for the year ended December 31, 2013 from $133,000 for the year ended December 31, 2012, due to the sales of our equipment as described above.

Selling, general and administrative

Selling, general and administrative expenses increased to approximately $2,819,000 for the year ended December 31, 2013 from approximately $1,884,000 for the year ended December 31, 2012. The increase in selling, general and administrative expenses is principally due to an increase in employee expenses related to the hiring of Company employees of approximately $535,000, depreciation and amortization of approximately $320,000, increased costs of approximately $153,000 in advertising and promotion activities related to business development. These increases were partially offset by a decrease in stock-based compensation costs of approximately $241,000, and increased costs (including legal fees, accounting fees, IPO related and other items) of approximately $168,000.

Research and Development

Research and development decreased to approximately $267,000 for the year ended December 31, 2013 from approximately $448,000 for the year ended December 31, 2012. The principal reason for the decrease is due to fewer legal and other intellectual property consulting fees related to certain patent applications on technology and processes that may be patentable.

We currently have three issued U.S. patents: two utility patents and one design patent. We have four pending U.S. patent applications. Our two issued utility patents, US Patent Nos. 8,562,247 and 8,556,536, were issued in October 2013 and cover certain unique device aspects of our asphalt repair equipment. Our design patent, US Patent No. D700,633, was issued in March 2014 and covers the ornamental design of our asphalt processor. We have received a notice of allowance from the US Patent and Trademark Office (“USPTO”) on a third utility patent covering certain unique method aspects of our asphalt repair equipment. We anticipate issuance of this patent in June 2014.

We intend to develop other technologies for which we will seek patent protection. In addition, we have made and expect to continue to make certain international filings to attempt to protect our intellectual property rights in a limited number of countries outside of the United States. However, we do not have any assurance that our current pending patent applications will be granted or that we will be able to develop future patentable technologies. We do not believe our ability to operate our business is dependent on the patentability of our technology.

Income taxes

Heatwurx has incurred tax losses since it began operations. A tax benefit would have been recorded for losses incurred since March 29, 2011; however, due to the uncertainty of realizing these assets, a valuation allowance was recognized which fully offset the deferred tax assets.

Liquidity and capital resources

Overview

To date we have relied exclusively on private placements with a small group of investors to finance our business and operations. We have had little revenue since our inception. For the year ended December 31, 2013, the Company incurred a net loss of approximately $3,069,000 and utilized $2,539,000 in cash flows from operating activities. The Company had cash on hand of approximately $187,000 as of December 31, 2013. Successful completion of the Company’s development program and its transition to profitable operations is dependent upon obtaining additional financing adequate to fulfill its development and commercialization activities, and achieve a level of revenues adequate to support the Company’s cost structure. Many of the Company’s objectives to establish profitable business operations rely upon the occurrence of events outside its control; there is no assurance that the Company will be successful in accomplishing these objectives.

The Company has incurred operating losses, accumulated deficit and negative cash flows from operations since inception. As of December 31, 2013, the Company had an accumulated deficit of approximately $6,814,000.

Management anticipates that the Company will require substantial additional funds to continue operations. As of December 31, 2013, we had approximately $187,000 cash on hand and were spending approximately $300,000 per month, of which only a minor amount was satisfied by gross proceeds from operations. Hence, the amount of cash on hand is not adequate to meet our operating expenses over the next twelve months.

Financing Activities

In May 2013, we raised $1,000,000 pursuant to the terms of a Senior Loan Agreement and the issuance of Senior Secured Promissory Notes. In connection with these loans, we paid each investor an origination fee of 1.5%, for a total of $15,000. These promissory notes matured on September 15, 2013, and bore interest at 12% per annum. In August, principal in the amount of $749,982 was retired through the issuance of Series D preferred shares. On September 15, 2013 the remaining principal in the amount of $250,018 and accrued interest was paid in full.

On June 21, 2013, the Company offered 1,500,000 units at $3.00 per unit for potential total proceeds of $4,500,000. On August 30, 2013, the Company completed its offering with a total of 727,648 units sold at $3.00 per unit for gross proceeds of $2,182,944, which consisted of $1,432,962 in cash and $749,982 in a non-cash conversion of senior secured notes payable. The Company paid share issuance costs in the amount of $84,232. Each unit consisted of one share of Series D Preferred Stock and one-half warrant, with each whole warrant exercisable at $3.00 per share, upon closing of the offering the Company has issued warrants to purchase 363,824 shares of common stock.

In October 2013, the Company initiated a follow-on Series D Preferred stock offering to sell the remaining 772,352 units at $3.00 per unit for up to $2,317,056 gross proceeds. The offering includes an over-allotment of 1,000,000 units for an additional $3,000,000 in potential gross proceeds. The offering term ends March 31, 2014, unless we extend the offering for a period not to exceed 60 additional days which would allow us to extend the offering through May 30, 2014. In January 2014, we sold 53,332 units at $3.00 per unit for gross proceeds of $159,996.

Beginning in October 2013 through April 2014 we have an obligation to make a series of principal payments totaling $1,000,000 on our current senior subordinated note payable. The Company paid $500,000 in accordance with the terms of the senior subordinated note payable during the year ended 2013 and $250,000 on February 15, 2014.

In December 2013, we raised $90,000 pursuant to the terms of a Loan Agreement and the issuance of Unsecured Promissory Notes. The notes mature on June 11, 2014 and bear interest of 12% per annum, paid monthly on the first day of the month.

On January 6, 2014, we initiated a debt offering of up to $1,000,000 under the terms of a Loan Agreement. Each loan is evidenced by an unsecured promissory note bearing interest at the rate of 12% per annum and maturing on January 6, 2016. Interest will be paid in equal monthly installments on the first day of each month. As additional consideration for a lender to enter into the Loan Agreement, the Company has agreed to issue to each lender one common stock purchase warrant for each $3.00 loaned to the Company, exercisable at $3.00 per share. The Warrants expire three years following the date of issuance and may not be offered for sale, sold, transferred or assigned without the consent of the Company. On February 28, 2014, we completed our $1,000,000 debt financing through the sale of notes and warrants under the Loan Agreement. The notes were in the aggregate principal amount of $850,000 and were issued with an aggregate of 283,329 warrants to the investors. We utilized $250,000 of the debt to pay our February 2014 required principal payment on the senior subordinated note payable as discussed above.

On March 1, 2014, we commenced a similar non-public offering of notes and warrants up to $3,000,000 which is intended to remain open until December 31, 2014, unless terminated sooner at the option of the Company before all of the notes are sold. The promissory notes will bear interest at 12% per annum payable monthly, with principal and unpaid interest due and payable on January 6, 2016. Persons holding promissory notes issued by the Company in prior offerings may convert these notes into the notes and warrants being offered in this new offering. Each lender in the offering will receive one warrant for each $3.00 loaned. The three-year warrants will be exercisable immediately at $3.00 per share. These securities are being offered and will be sold solely to accredited investors without selling commissions. The proceeds of this offering will be used to satisfy outstanding debt and provide working capital for the Company. As of March 27, 2014 we have received $150,000 under the debt offering and issued warrants to purchase 50,000 shares of our common stock.

Cash Requirements

The issues described in the paragraphs above raise substantial doubt about the Company’s ability to continue as a going concern. Although we have commenced a new $3,000,000 debt offering as noted above and we have a total of approximately $2,157,000 remaining to be raised under our Series D preferred stock offering, we cannot guarantee we will be able to raise the entire offering amounts, if any. We are solely reliant on raising additional capital in order to maintain our current operations. To date we have been able to raise debt and equity financing through the assistance of a small number of our investors who have been substantial participants in our debt and equity offerings since our formation. If these investors choose not to assist us with our capital raising initiatives in the future, we do not expect that we would be able to obtain any alternative forms of financing at this time and we would not be able to continue to satisfy our current or long term obligations. Based upon our current monthly spend we anticipate the need to raise at least $3,600,000 to meet our cash flow requirements for the next twelve months.

Total Contractual Cash Obligations

A summary of our total contractual cash obligations as of December 31, 2013, is as follows:

Contractual Obligation Total Due in 2014 Due in 2015-2016 Due in 2017-2018 Thereafter
Sr. Subordinated note payable $ 500,000 $ 500,000 $ - $ - $ -
Operating lease obligation (1) 6,358 6,358 - - -
Equipment financing (2) 186,645 41,186 89,726 55,733 -
Purchase obligations (3) 114,773 114,773 - - -
Total $ 807,776 $ 662,317 $ 89,726 $ 55,733 $ -

(1) Amount relates to our office lease agreement through February 28, 2014

(2) Includes equipment utilized in our demonstration process

(3) Represents a commitment to our manufacturer to purchase equipment.

Off-Balance Sheet Arrangements

We do not engage in off-balance sheet financing activities

Critical Accounting Policies and Estimates

The preparation of these financial statements in conformity with GAAP requires management to make estimates, allocations and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosure of contingent assets and liabilities. On an ongoing basis, management evaluates its estimates, including those related to impairment of long-lived assets, accrued liabilities and certain expenses. We base our estimates about the carrying values of assets and liabilities that are not readily apparent from other sources on historical experience and on other assumptions believed to be reasonable under the circumstances. Actual results may differ materially from these estimates under different assumptions or conditions. We believe the following critical accounting policies involve significant judgments and estimates used in the preparation of our financial statements. See Note 2 of the accompanying Notes to the Financial Statements included in Item 8 of this Form 10-K for additional information on these policies and estimates, as well as a discussion of additional accounting policies and estimates.

Revenue Recognition

Equipment sales revenue is recognized when equipment is shipped to our customer and collection is reasonably assured. The Company sells its equipment (HWX-30 heater and HWX-AP-40 asphalt processor), as well as certain consumables, such as RxEHAB rejuvenation strips and Polymer pellets, to third parties. Equipment sales revenue is recognized when all of the following criteria are satisfied: (a) persuasive evidence of a sales arrangement exists; (b) price is fixed and determinable; (c) collectability is reasonably assured; and (d) delivery has occurred. Persuasive evidence of an arrangement and a fixed or determinable price exist once we receive an order or contract from a customer. We assess collectability at the time of the sale and if collectability is not reasonably assured, the sale is deferred and not recognized until collectability is probable or payment is received. Typically, title and risk of ownership transfer when the equipment is shipped.

Research and Development Expenses

Research and development costs are expensed as incurred and consist of direct and overhead-related expenses. Expenditures to acquire technologies, including licenses, which are utilized in research and development and that have no alternative future use are expensed when incurred. Technology we develop for use in our products is expensed as incurred until technological feasibility has been established after which it is capitalized and depreciated.

Stock-based Compensation

We record equity instruments at their fair value on the measurement date by utilizing the Black-Scholes option-pricing model. Stock Compensation for all share-based payments, is recognized as an expense over the requisite service period.

The significant assumptions utilized in determining the fair value of our stock options included the volatility rate, estimated term of the options, risk-free interest rate and forfeiture rate. In order to estimate the volatility rate at each issuance date, given that the Company has not established a historical volatility rate as it has minimal trading volume since we began trading in October 2013, management reviewed volatility rates for a number of companies with similar manufacturing operations to arrive at an estimated volatility rate for each option grant. The term of the options was assumed to be five years, which is the contractual term of the options. The risk-free interest rate was determined utilizing the treasury rate with a maturity equal to the estimated term of the option grant. Finally, management assumed a zero forfeiture rate as the options granted were either fully-vested upon the date of grant or had relatively short vesting periods. As such, management does not currently believe that any of the options granted will be forfeited. We will monitor actual forfeiture rates, if any, and make any appropriate adjustments necessary to our forfeiture rate in the future.

Non-employee share-based compensation charges generally are immediately vested and have no future performance requirements by the non-employee and the total share-based compensation charge is recorded in the period of the measurement date.

Impairment of Long-Lived Assets

We review long-lived assets for impairment on an annual basis, during the fourth quarter or on an interim basis if an event occurs that might reduce the fair value of such assets below their carrying values. An impairment loss would be recognized based on the difference between the carrying value of the asset and its estimated fair value, which would be determined based on either discounted future cash flows or other appropriate fair value methods.

Recent Accounting Pronouncements

There are no recent accounting pronouncements that affect the Company.

Controls and procedures

As filed, 3,598 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Our principal executive officer, David Dworsky, and our principal financial and accounting officer, Allen Dodge, have concluded, based on their evaluation, as of the end of the period covered by this report, that our disclosure controls and procedures (as defined in Rule 15d-15(e) under the Exchange Act) are (1) effective to ensure that material information required to be disclosed by us in reports filed or submitted by us under the Exchange Act is recorded, processed, summarized, and reported within the time periods specified in the rules and forms of the Securities and Exchange Commission, and (2) designed to ensure that material information required to be disclosed by us in such reports is accumulated, organized and communicated to our management, including our principal executive officer and principal financial officer, as appropriated, to allow timely decisions regarding required disclosure.

Our management is responsible for establishing and maintaining adequate internal control over financial reporting to provide reasonable assurance regarding the reliability of our financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. Internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that in reasonable detail accurately and fairly reflect the transactions and dispositions of the assets of our company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of our management and directors; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

Management assessed our internal control over financial reporting as of December 31, 2013, the end of our fiscal year. Management based its assessment on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (the COSO 1992 Criteria). Management’s assessment included evaluation of such elements as the design and operating effectiveness of key financial reporting controls, process documentation, accounting policies, and our overall control environment.

Based on our assessment, management has concluded that our internal control over financial reporting was effective, as of the end of the fiscal year, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external reporting purposes in accordance with generally accepted accounting principles.

There were no changes in our internal control over financial reporting (as defined in Rule 15d - 15(f) under the Exchange Act) during the quarter ended December 31, 2013 that have materially affected, or are reasonably likely to materially affect our internal control over financial reporting.

Figures reported in this filing

Standardized line items from the XBRL in this filing, for the period ended 2013-12-31. Comparative periods it repeats are left out.

Figures reported in this filing
Line itemPeriodValueXBRL concept
Revenue12 months2013-01-01 to 2013-12-31$312.5kus-gaap:Revenues
Cost of revenue12 months2013-01-01 to 2013-12-31$188.0kus-gaap:CostOfGoodsSold
Gross profit12 months2013-01-01 to 2013-12-31$88.3kus-gaap:GrossProfit
Research and development12 months2013-01-01 to 2013-12-31$267.1kus-gaap:ResearchAndDevelopmentExpense
Selling, general and administrative12 months2013-01-01 to 2013-12-31$2.8mus-gaap:SellingGeneralAndAdministrativeExpense
Interest expense12 months2013-01-01 to 2013-12-31−$109.7kus-gaap:InterestExpense
Income tax12 months2013-01-01 to 2013-12-31−$50us-gaap:IncomeTaxExpenseBenefit
Net income12 months2013-01-01 to 2013-12-31−$3.1mus-gaap:NetIncomeLoss
Diluted EPS12 months2013-01-01 to 2013-12-31−$0.61us-gaap:EarningsPerShareBasicAndDiluted
Operating cash flow12 months2013-01-01 to 2013-12-31−$2.5mus-gaap:NetCashProvidedByUsedInOperatingActivities
Capital expenditure12 months2013-01-01 to 2013-12-31$27.7kus-gaap:PaymentsToAcquirePropertyPlantAndEquipment
Cash and equivalentsAt period end2013-12-31$186.9kus-gaap:CashAndCashEquivalentsAtCarryingValue
Current assetsAt period end2013-12-31$514.7kus-gaap:AssetsCurrent
Total assetsAt period end2013-12-31$2.9mus-gaap:Assets
Current liabilitiesAt period end2013-12-31$1.1mus-gaap:LiabilitiesCurrent
Total liabilitiesAt period end2013-12-31$1.3mus-gaap:Liabilities
Shareholders' equityAt period end2013-12-31$1.7mus-gaap:StockholdersEquity
Shares outstandingAt period end2013-12-318,082,000 sharesdei:EntityCommonStockSharesOutstanding

Source: SEC EDGAR, the filing index for accession 0001393905-14-000131. Last ingested by Listed: Nov 14, 2026, 23:30 ET. Listed shows no prices and gives no investment advice.