Listed

Vishay Precision Group, Inc.: Form 10-Q for the period ended Apr 2, 2016

Filed with the SEC on May 11, 2016 and accepted by EDGAR at May 11, 2016, 12:44 ET.

Share

Management's discussion and analysis

As filed, 46,948 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Overview

VPG is an internationally recognized designer, manufacturer and marketer of sensors, and sensor-based measurement systems, as well as specialty resistors and strain gages based upon our proprietary technology. We provide precision products and solutions, many of which are “designed-in” by our customers, specializing in the growing markets of stress, force, weight, pressure, and current measurements. A significant portion of our products and solutions are primarily based upon our proprietary foil technology and are produced as part of our vertically integrated structure. We believe this strategy results in higher quality, more cost effective and focused solutions for our customers. Our products are marketed under a variety of brand names that we believe are characterized as having a very high level of precision and quality. Our global operations enable us to produce a wide variety of products in strategically effective geographic locations that also optimize our resources for specific technologies, sensors, assemblies, and systems.

The Company also has a long heritage of innovation in precision foil resistors, foil strain gages, and sensors that convert mechanical inputs into an electronic signal for display, processing, interpretation, or control by our instrumentation and systems products. Our advanced sensor product line continues this heritage by offering high-quality foil strain gages produced in a proprietary, highly automated environment. Precision sensors are essential to the accurate measurement, resolution and display of force, weight, pressure, torque, tilt, motion, or acceleration, especially in the legal-for-trade, commercial, and industrial marketplaces. This expertise served as a foundation for our expansion into strain gage instrumentation, load cells, transducers, weighing modules, and complete systems for process control and on-board weighing. Although our products are typically used in the industrial market, we believe our advanced sensors may find application outside the industrial market.

The precision sensor market is integral to the development of intelligent products across a wide variety of end markets upon which we focus, including medical, agricultural, transportation, industrial, avionics, military, and space applications. We believe that as original equipment manufacturers (“OEMs”) continue a drive to make products “smarter,” they will integrate more sensors and related systems into their solutions to link the mechanical/physical world with digital control and/or response. We believe this offers a substantial growth opportunity for our products and expertise.

VPG reports in three product segments: the Foil Technology Products segment, the Force Sensors segment, and the Weighing and Control Systems segment. The Foil Technology Products reporting segment is comprised of the foil resistor and strain gage operating segments. The Force Sensors reporting segment is comprised of transducers, load cells, and modules. The Weighing and Control Systems reporting segment is comprised of instruments, complete systems for process control, and on-board weighing applications.

As previously reported in our Quarterly Report on Form 10-Q for the period ended June 27, 2015, the Company determined that transactions at one of its Indian subsidiaries had been recorded in their local currency, the Indian rupee, instead of their functional currency, the U.S. dollar, in prior periods. Consequently, the Company has restated prior period amounts to correct these errors, as well as certain other immaterial errors related to prior periods. All prior periods presented in this report reflect the impact of this restatement.

In December 2015, we completed the acquisition of Stress-Tek, Inc. ("Stress-Tek"). Stress-Tek is a designer and manufacturer of state-of-the-art strain gage-based load cells and force measurement systems primarily serving the North American market. The results of operations of Stress-Tek are included in the Weighing and Control Systems reporting segment in our consolidated condensed financial statements beginning January 1, 2016.

In April, 2016, we completed the acquisition of Pacific Instruments, Inc. ("Pacific Instruments"). Pacific Instruments is a designer and manufacturer of high performance data acquisition systems. The results of operations of Pacific Instruments will be included in the Foil Technology Products reporting segment in our consolidated condensed financial statements beginning April 6, 2016.

Net revenues for the fiscal quarter ended April 2, 2016 were $56.6 million versus $56.6 million for the comparable prior year period. Net earnings attributable to VPG stockholders for the fiscal quarter ended April 2, 2016 were $0.5 million, or $0.04 per diluted share, versus $0.9 million, or $0.06 per diluted share, for the comparable prior year period.

The results of operations for the fiscal quarters ended April 2, 2016 and March 28, 2015 include items affecting comparability as listed in the reconciliations below. The reconciliations below include certain financial measures which are not recognized in accordance with U.S. generally accepted accounting principles ("GAAP") including adjusted gross profit, adjusted gross profit margin, adjusted net earnings and adjusted net earnings per diluted share. These non-GAAP measures should not be viewed as an alternative to GAAP measures of performance. Non-GAAP measures such as adjusted gross profit, adjusted gross profit margin, adjusted net earnings and adjusted net earnings per diluted share do not have uniform definitions. These measures, as calculated by VPG, may not be comparable to similarly titled measures used by other companies. Management believes that these measures are meaningful because they provide insight with respect to intrinsic operating results. The reconciling items presented below represent significant charges or credits which are important to understanding our intrinsic operations.

The items affecting comparability are (dollars in thousands, except per share amounts):

Fiscal quarter ended April 2, 2016 March 28, 2015
Gross profit $19,775 $20,979
Gross profit margin 34.9% 37.1%
Reconciling items affecting gross profit margin
Acquisition purchase accounting adjustments (a) 296 —
Adjusted gross profit $20,071 $20,979
Adjusted gross profit margin 35.4% 37.1%
Fiscal quarter ended April 2, 2016 March 28, 2015
Net earnings attributable to VPG stockholders $480 $860
Reconciling items affecting operating margin
Acquisition purchase accounting adjustments (a) 296 —
Acquisition costs 62 —
Restructuring costs 675 78
Reconciling items affecting income tax expense
Tax effect of adjustments for purchase accounting, acquisition costs, restructuring costs, and discrete tax item (179) 16
Adjusted net earnings attributable to VPG stockholders $1,692 $922
Adjusted net earnings per diluted share $0.13 $0.07
Weighted average shares outstanding - diluted 13,399 13,960

(a) Acquisition purchase accounting adjustments, recorded in connection with the acquisition of the Stress-Tek, include fair market value adjustments associated with inventory.

Financial Metrics

We utilize several financial measures and metrics to evaluate the performance and assess the future direction of our business. These key financial measures and metrics include net revenues, gross profit margin, end-of-period backlog, book-to-bill ratio, and inventory turnover.

Gross profit margin is computed as gross profit as a percentage of net revenues. Gross profit is generally net revenues less costs of products sold, but could also include certain other period costs. Gross profit margin is clearly a function of net revenues, but also reflects our cost-cutting programs and our ability to contain fixed costs.

End-of-period backlog is one indicator of potential future sales. We include in our backlog only open orders that have been released by the customer for shipment in the next twelve months. If demand falls below customers’ forecasts, or if customers do not control their inventory effectively, they may cancel or reschedule the shipments that are included in our backlog, in many instances without the payment of any penalty. Therefore, the backlog is not necessarily indicative of the results to be expected for future periods.

Another important indicator of demand in our industry is the book-to-bill ratio, which is the ratio of the amount of product ordered during a period compared with the product that we ship during that period. A book-to-bill ratio that is greater than one indicates that demand is higher than current revenues and manufacturing capacities, and it indicates that we may generate increasing revenues in future periods. Conversely, a book-to-bill ratio that is less than one is an indicator of lower demand compared to existing revenues and current capacities and may foretell declining sales.

We focus on our inventory turnover as a measure of how well we are managing our inventory. We define inventory turnover for a financial reporting period as our costs of products sold for the four fiscal quarters ending on the last day of the reporting period divided by our average inventory (computed using each quarter-end balance) for this same period. A higher level of inventory turnover reflects more efficient use of our capital.

The quarter-to-quarter trends in these financial metrics can also be an important indicator of the likely direction of our business. The following tables show net revenues, gross profit margin, the end-of-period backlog, the book-to-bill ratio, and the inventory turnover for our business as a whole and by segment during the five quarters beginning with the first quarter of 2015 through the first quarter of 2016 (dollars in thousands):

1st Quarter 2015 2nd Quarter 2015 3rd Quarter 2015 4th Quarter 2015 1st Quarter 2016
Net revenues $56,608 $59,508 $57,149 $58,913 $56,629
Gross profit margin 37.1% 35.3% 37.5% 35.2% 34.9%
End-of-period backlog $59,200 $54,600 $52,200 $48,800 $52,000
Book-to-bill ratio 1.05 0.91 0.97 0.95 1.03
Inventory turnover 2.60 2.75 2.54 2.77 2.62
  • 20-
Foil Technology Products 1st Quarter 2015 2nd Quarter 2015 3rd Quarter 2015 4th Quarter 2015 1st Quarter 2016
Net revenues $25,061 $26,155 $27,000 $26,244 $26,319
Gross profit margin 41.4% 39.6% 42.0% 36.5% 42.3%
End-of-period backlog $28,500 $25,900 $23,400 $22,500 $22,400
Book-to-bill ratio 1.12 0.90 0.90 0.97 0.98
Inventory turnover 2.88 2.99 2.83 2.99 2.67
Force Sensors
Net revenues $15,237 $15,645 $14,580 $15,586 $14,838
Gross profit margin 21.8% 19.0% 21.0% 20.2% 18.4%
End-of-period backlog $11,600 $11,300 $11,600 $11,500 $12,500
Book-to-bill ratio 0.98 0.98 1.03 1.00 1.06
Inventory turnover 1.98 2.04 1.82 2.06 2.15
Weighing and Control Systems
Net revenues $16,310 $17,708 $15,569 $17,083 $15,472
Gross profit margin 44.6% 43.6% 45.4% 47.0% 38.3%
End-of-period backlog $19,100 $17,400 $17,200 $14,800 $17,100
Book-to-bill ratio 1.00 0.88 1.05 0.89 1.11
Inventory turnover 3.91 4.38 3.84 4.15 3.50

Net revenues for the first quarter of 2016 decreased $2.3 million, or 3.9%, from the net revenues reported in the fourth quarter of 2015, and were flat compared to net revenues for the comparable prior year period. Lower net revenues in the Weighing and Control Systems and Force Sensors segments were due to lower volumes in each segment. The major decrease in revenues for the Weighing and Control Systems segment, as compared to the fourth quarter of 2015, was in the steel industry, where we continue to see a slowdown in the market. Decreases in process weighing in Europe and on-board weighing in the U.S. also contributed to the decline in the Weighing and Control Systems segment. Net revenues for the first quarter of 2016 were negatively impacted by the effect of foreign exchange rates of $1.2 million as compared to the first quarter of 2015. Exchange rates had minimal impact on net revenues from the fourth quarter of 2015 to the first quarter of 2016.

The gross profit margin in the first quarter of 2016 decreased 2.2% as compared to the first quarter of 2015. Lower gross profit margin in the Weighing and Control Systems and Force Sensors segments were partially offset by increases in the gross profit margins in the Foil Technology Products segment. The major decrease in gross profit margin for the Weighing and Control Systems segment was due to negative foreign exchange impacts and an unfavorable product mix. The major decrease in gross profit margin for the Force Sensors segment was due to a reduction in inventory. The increase in the gross profit margin in the Foil Technology Products segment was primarily due to an increase in volume partially offset by labor inefficiencies related to the expansion of our advanced sensors platform.

The gross profit margin in the first quarter of 2016 decreased 0.3% from the fourth quarter of 2015. The primary driver of the decrease in gross profit margin for the Weighing and Control Systems segment and the Force Sensors segment was lower volume. These decreases are partially offset by an increase in gross profit margin in the Foil Technology Products segment due to cost savings from our previously announced cost reduction programs.

Optimize Core Competence

The Company’s core competency and key value proposition is providing customers with proprietary foil technology products and precision measurement sensors and sensor-based systems. Our foil technology resistors and strain gages are recognized as global market leading products that provide high precision and high stability over extreme temperature ranges, and long life. Our force sensor products and our weighing and control systems products are also certified to meet some of the highest levels of precision measurements of force, weight, pressure, torque, tilt, motion, and acceleration. While these competencies form a solid basis for our products, we believe there are several areas that can be optimized, including: increasing our technical sales efforts; continuing to innovate in product performance and design; and refining our manufacturing processes.

Our foil technology research group continues to provide innovations that enhance the capability and performance of our strain gages, while simultaneously reducing their size and power consumption as part of our advanced sensors product line. We believe this new foil technology will create new markets as customers “design in” these next generation products in existing and new applications. Our development engineering team is also responsible for creating new processes to further automate manufacturing, and improve productivity and quality. Our advanced sensors manufacturing technology offers us the capability to produce high-quality foil strain gages in a highly automated environment, which we expect to result in reduced manufacturing and lead times, and increased margins. The expected benefits of this highly automated approach are the basis for a significant portion of the restructuring efforts we undertook in 2015, and which we expect to continue in 2016.

Our design, research, and product development teams, in partnership with our marketing teams, drive our efforts to bring innovations to market. We intend to leverage our insights into customer demand to continually develop and roll out new, innovative products within our existing lines and to modify our existing core products in ways that make them more appealing, addressing changing customer needs and industry trends in terms of form, fit, and function.

We also seek to achieve significant production cost savings through the transfer, expansion, and construction of manufacturing operations in countries such as India and Israel, where we can benefit from lower labor costs, improved efficiencies, or available tax and other government-sponsored incentives. For example, we continue to relocate our force sensor manufacturing from leased locations with higher labor cost to the owned facility we constructed in India. This consolidation of operations is part of our global restructuring and cost reduction program announced in November 2015.

Acquisition Strategy

We expect to continue to make strategic acquisitions where opportunities present themselves to grow our segments. Historically, our growth and acquisition strategy has been largely focused on vertical product integration, using our foil strain gages in our force sensor products, and incorporating those products into our weighing and control systems. The acquisitions of Stress-Tek and KELK, each of which employ our foil strain gages to manufacture load cells for their systems, continue this strategy. Additionally, the KELK acquisition resulted in the acquisition of certain optical sensor technology. Along with our recent success in microelectromechanical ("MEMS") technology for on-board weighing, we expect to expand our expertise, and our acquisition focus, outside our traditional vertical approach to other precision sensor solutions in the fields of measurement of force, weight, pressure, torque, tilt, motion, and acceleration. We believe acquired businesses will benefit from improvements we implement to reduce redundant functions and from our current global manufacturing and distribution footprint.

On April 6, 2016, we acquired Pacific Instruments. Pacific Instruments is a designer and manufacturer of high performance data acquisition systems. They have extensive experience integrating large, high performance data acquisition and control systems, selling primarily to the aerospace, commercial aviation and defense markets, mainly in the U.S. Pacific Instruments provides installation, facility integration, training and on-going technical support for their manufactured products. Pacific Instruments products will provide an extension to our Foil Technology Products segment, which already offers data acquisition systems, primarily in the field of strain measurement.

Research and Development

Research and development will continue to play a key role in our efforts to introduce innovative products to generate new sales and to improve profitability. We expect to continue to expand our position as a leading supplier of precision foil technology products. We believe our R&D efforts should provide us with a variety of opportunities to leverage technology, products, and our manufacturing base in order to ultimately improve our financial performance.

Cost Management

To be successful, we believe we must seek new strategies for controlling operating costs. Through automation in our plants, we believe we can optimize our capital and labor resources in production, inventory management, quality control, and warehousing. We are in the process of moving some manufacturing from higher-cost countries to lower-cost countries. This may enable us to become more efficient and cost competitive, and also maintain tighter controls of the operation.

Production transfers, facility consolidations, and other long-term cost-cutting measures require us to initially incur significant severance and other exit costs. We have begun to realize the benefits of our restructuring through lower labor costs and other operating expenses, and expect to continue reaping these benefits in future periods. However, these programs to improve our profitability also involve certain risks which could materially impact our future operating results, as further detailed in Part I, Item 1A “Risk Factors” of our Annual Report on Form 10-K, filed with the Securities and Exchange Commission (“SEC”) on March 9, 2016.

The Company recorded restructuring costs of $0.7 million during the fiscal quarter ended April 2, 2016 related to cost reduction programs at its subsidiaries in the United States, Costa Rica, Sweden, and the Netherlands. Restructuring costs mainly were comprised of employee termination costs, including severance and statutory retirement allowances, and were incurred in connection with various cost reduction programs.

We are evaluating plans to further reduce our costs by consolidating additional manufacturing operations. These plans may require us to incur restructuring and severance costs in future periods. While streamlining and reducing fixed overhead, we are exercising caution so that we will not negatively impact our customer service, or our ability to further develop products and processes.

Goodwill

We test the goodwill in each of our reporting units for impairment at least annually, and whenever events or changes in circumstances occur indicating that a possible impairment may have been incurred. Determining whether to test goodwill for impairment, and the application of goodwill impairment tests, require significant management judgment, including the identification of reporting units, assigning assets and liabilities to reporting units, assigning goodwill to reporting units, and determining the fair value of each reporting unit. Changes in these estimates could materially affect the determination of fair value for each reporting unit. A slowdown or deferral of orders for a business, with which we have goodwill associated, could impact our valuation of that goodwill. For instance, if the slowdown in the steel industry persists, it may impact our valuation of goodwill within our Weighing and Control Systems segment in future periods.

Foreign Currency

We are exposed to foreign currency exchange rate risks, particularly due to transactions in currencies other than the functional currencies of certain subsidiaries. U.S. GAAP requires that entities identify the “functional currency” of each of their subsidiaries and measure all elements of the financial statements in that functional currency. A subsidiary’s functional currency is the currency of the primary economic environment in which it operates. In cases where a subsidiary is relatively self-contained within a particular country, the local currency is generally deemed to be the functional currency. However, a foreign subsidiary that is a direct and integral component or extension of the parent company’s operations generally would have the parent company’s currency as its functional currency. We have subsidiaries that fall into each of these categories.

Foreign Subsidiaries which use the Local Currency as the Functional Currency

Our operations in Europe, Canada, and certain locations in Asia primarily generate and expend cash using local currencies, and accordingly, these subsidiaries utilize the local currency as their functional currency. For those subsidiaries where the local currency is the functional currency, assets and liabilities in the consolidated balance sheets have been translated at the rate of exchange as of the balance sheet date. Translation adjustments do not impact the results of operations and are reported as a separate component of equity.

For those subsidiaries where the local currency is the functional currency, revenues and expenses are translated at the average exchange rate for the year. While the translation of revenues and expenses into U.S. dollars does not directly impact the consolidated statement of operations, the translation effectively increases or decreases the U.S. dollar equivalent of revenues generated and expenses incurred in those foreign currencies.

Foreign Subsidiaries which use the U.S. Dollar as the Functional Currency

Our operations in Israel and certain locations in Asia primarily generate cash in U.S. dollars, and accordingly, these subsidiaries utilize the U.S. dollar as their functional currency. For those foreign subsidiaries where the U.S. dollar is the functional currency, all foreign currency financial statement amounts are remeasured into U.S. dollars. Exchange gains and losses arising from remeasurement of foreign currency-denominated monetary assets and liabilities are included in the results of operations. While these subsidiaries transact most business in U.S. dollars, they may have significant costs, particularly related to payroll, which are incurred in the local currency.

For the fiscal quarter ended April 2, 2016, exchange rates reduced net revenues by $1.2 million, and costs of products sold and selling, general, and administrative expenses by $1.0 million, when compared to the comparable prior year period.

Results of Operations

Statement of operations’ captions as a percentage of net revenues and the effective tax rates were as follows:

Fiscal quarter ended April 2, 2016 March 28, 2015
Costs of products sold 65.1% 62.9%
Gross profit 34.9% 37.1%
Selling, general, and administrative expenses 31.9% 33.1%
Operating income 1.7% 3.8%
Income before taxes 1.9% 1.8%
Net earnings 0.9% 1.5%
Net earnings attributable to VPG stockholders 0.8% 1.5%
Effective tax rate 54.4% 18.3%

Net Revenues

Net revenues were as follows (dollars in thousands):

Fiscal quarter ended April 2, 2016 March 28, 2015
Net revenues $56,629 $56,608
Change versus comparable prior year period $21
Percentage change versus prior year period —%

Changes in net revenues were attributable to the following:

Change attributable to: vs. prior year quarter
Change in volume (1.5)%
Foreign currency effects (2.2)%
Acquisitions 3.7%
Net change —%

During the fiscal quarter ended April 2, 2016, revenues remained flat as compared to the prior year period. Improvements in the Foil Technology Products segment revenues, and an increase in the revenues from the acquisition of Stress-Tek, were offset by decreased revenues in both the Force Sensors and Weighing and Control Systems segments.

Gross Profit Margin

Gross profit as a percentage of net revenues was as follows:

Fiscal quarter ended April 2, 2016 March 28, 2015
Gross profit margin 34.9% 37.1%

The gross profit margin for the fiscal quarter ended April 2, 2016 decreased compared to the comparable prior year period, mainly due to lower gross margins in the Force Sensors and Weighing and Control Systems segments, particularly related to the steel markets.

Segments

Analysis of revenues and gross profit margins for our reportable segments is provided below.

Foil Technology Products

Net revenues of the Foil Technology Products segment were as follows (dollars in thousands):

Fiscal quarter ended April 2, 2016 March 28, 2015
Net revenues $26,319 $25,061
Change versus comparable prior year period $1,258
Percentage change versus prior year period 5.0%

Changes in Foil Technology Products segment net revenues were attributable to the following:

Change attributable to: vs. prior year quarter
Change in volume 5.3%
Change in average selling prices 0.3%
Foreign currency effects (0.6)%
Net change 5.0%

Net revenues increased for the fiscal quarter ended April 2, 2016, as compared to the comparable prior year period, due to higher volume from the test and measurement market sector in Asia.

Gross profit as a percentage of net revenues for the Foil Technology Products segment was as follows:

Fiscal quarter ended April 2, 2016 March 28, 2015
Gross profit margin 42.3% 41.4%

The gross profit margin increased for the fiscal quarter ended April 2, 2016, when compared to the comparable prior year period due to higher volume, as described above, partially offset by labor inefficiencies related to the expansion of our advanced sensors platform.

Force Sensors

Net revenues of the Force Sensors segment were as follows (dollars in thousands):

Fiscal quarter ended April 2, 2016 March 28, 2015
Net revenues $14,838 $15,237
Change versus comparable prior year period $(399)
Percentage change versus prior year period (2.6)%
  • 25-

Changes in Force Sensors segment net revenues were attributable to the following:

Change attributable to: vs. prior year quarter
Change in volume 0.0%
Change in average selling prices (0.9)%
Foreign currency effects (1.7)%
Net change (2.6)%

Net revenues decreased for the fiscal quarter ended April 2, 2016, as compared to the comparable prior year period, mainly due to negative foreign currency impacts relating to the euro, British pound, and Indian rupee.

Gross profit as a percentage of net revenues for the Force Sensors segment was as follows:

Fiscal quarter ended April 2, 2016 March 28, 2015
Gross profit margin 18.4% 21.8%

The gross profit margin for the fiscal quarter ended April 2, 2016 decreased from the comparable prior year period mainly due to a reduction in inventory.

Weighing and Control Systems

Net revenues of the Weighing and Control Systems segment were as follows (dollars in thousands):

Fiscal quarter ended April 2, 2016 March 28, 2015
Net revenues $15,472 $16,310
Change versus comparable prior year period $(838)
Percentage change versus prior year period (5.1)%

Changes in Weighing and Control Systems segment net revenues were attributable to the following:

Change attributable to: vs. prior year quarter
Change in volume (13.4)%
Change in average selling prices 0.5%
Foreign currency effects (5.1)%
Acquisitions 12.9%
Net change (5.1)%

Net revenues decreased for the fiscal quarter ended April 2, 2016, as compared to the comparable prior year period. The increase in volume from the acquisition of Stress-Tek was offset by declines in volume, mainly from the steel business.

Gross profit as a percentage of net revenues for the Weighing and Control Systems segment were as follows:

Fiscal quarter ended April 2, 2016 March 28, 2015
Gross profit margin 38.3% 44.6%
  • 26-

The gross profit margin for the fiscal quarter ended April 2, 2016 decreased compared to the comparable prior year period, mainly due to lower revenues from the steel business, negative foreign currency impacts and an unfavorable product mix. Additionally, Stress-Tek purchase accounting adjustments of $0.3 million were recorded during the fiscal quarter ended April 2, 2016. Excluding the purchase accounting adjustments, the gross margin percentage would have been 40.2%.

Selling, General, and Administrative Expenses

Selling, general, and administrative (“SG&A”) expenses are summarized as follows (dollars in thousands):

Fiscal quarter ended April 2, 2016 March 28, 2015
Total SG&A expenses $18,048 $18,748
as a percentage of net revenues 31.9% 33.1%

Given the specialized nature of our products and our direct sales approach, we incur significant selling, general, and administrative costs. SG&A expenses for the fiscal quarter ended April 2, 2016 as compared to the comparable prior year period decreased by $0.7 million. The decrease primarily relates to lower headcount and commissions of $1.0 million, a favorable impact of $0.4 million in foreign currency effects, offset by $0.7 million of costs associated with the operations of Stress-Tek, which was acquired on December 30, 2015.

Acquisition Costs

In connection with the acquisitions of Stress-Tek and Pacific Instruments, we recorded acquisition costs of $0.1 million in our consolidated condensed financial statements during the fiscal quarter ended April 2, 2016.

Restructuring Costs

Restructuring costs reflect the cost reduction programs implemented by the Company. Restructuring costs are expensed during the period in which the Company determines it will incur those costs and all requirements for accrual are met. Because these costs are recorded based upon estimates, actual expenditures for the restructuring activities may differ from the initially recorded costs. If the initial estimates are too low or too high, the Company could be required to either record additional expense in future periods or to reverse part of the previously recorded charges.

On November 16, 2015, the Company announced a cost reduction program as part of its efforts to improve efficiency and operating performance. The Company anticipates annual savings of approximately $6.0 million, beginning in 2016. Approximate cost savings realized as of April 2, 2016 were $1.1 million. Complete implementation of this program is expected to occur by the end of the second quarter of 2017.

On March 23, 2016, the Company announced an additional closure plan in connection with the November 16, 2015 global cost reduction program with the decision to close its facility in Alajuela, Costa Rica. The Company anticipates annual savings of approximately $0.7 million in 2016. Substantial implementation of this program is expected to occur by the end of the third quarter of 2016.

The Company recorded restructuring costs of $0.7 million during the fiscal quarter ended April 2, 2016. These costs were mainly comprised of employee termination costs, including severance, at its subsidiaries in the United States, Costa Rica, Sweden, and the Netherlands. The restructuring costs recorded during the fiscal quarter ended March 28, 2015, were comprised of employee termination costs, including severance, at one of the Company's subsidiaries in the United States.

Other Income (Expense)

Total interest expense for the fiscal quarter ended April 2, 2016 was higher than interest expense in the comparable prior year periods, mainly due to higher debt associated with funding the acquisition of Stress-Tek, which was completed on December 30, 2015.

The following table analyzes the components of the line “Other” on the consolidated condensed statements of operations (in thousands):

Fiscal quarter ended April 2, 2016 March 28, 2015 Change
Foreign exchange gain (loss) $428 $(959) $1,387
Interest income 62 55 7
Other (65) (25) (40)
$425 $(929) $1,354

Foreign currency exchange gains and losses represent the impact of changes in foreign currency exchange rates. For the quarter ended April 2, 2016, the change in foreign exchange gains and losses during the period, as compared to the prior year periods, is largely due to exposure to currency fluctuations with the Canadian dollar. A substantial portion of this currency fluctuation is due to a U.S. dollar denominated term facility maintained by our Canadian subsidiary.

Income Taxes

The effective tax rate for the fiscal quarter ended April 2, 2016 was 54.4% versus 18.3% for the fiscal quarter ended March 28, 2015. The increase in the tax rate is primarily attributable to not providing a tax benefit in the 2016 period on U.S. losses. In the fourth quarter of 2015, we established a full valuation allowance for our U.S. deferred tax assets since realization was, and continues to be, not more likely than not. The difference in the effective tax rate is also caused by changes in the geographic mix of pre-tax earnings and an increase in tax expense associated with discrete items, including foreign exchange gains and losses.

We evaluate our deferred income taxes quarterly to determine if valuation allowances are required or should be adjusted. We consider whether valuation allowances should be established against deferred tax assets based on all available evidence, both positive and negative, using a “more likely than not” standard. This assessment considers, among other matters, the nature, frequency and severity of current and cumulative losses, forecasts of future profitability, the duration of statutory carryforward periods, and our ability to identify feasible tax planning strategies. Deferred tax assets may not be recognized in jurisdictions where there is a history of cumulative losses, where there is no taxable income in the carryback period, where there is insufficient evidence to support future earnings and where there is no other positive evidence, such as the likely reversal of taxable temporary differences, that would result in the utilization of deferred tax assets.

Financial Condition, Liquidity, and Capital Resources

We focus on our ability to generate cash flows from operations. The cash generated from operations is used to fund our capital expenditure plans, and cash in excess of capital expenditure needs is available to fund our acquisition strategy and to reduce debt levels.

At April 2, 2016 and December 31, 2015, we had significant cash balances and available credit. We believe that our current cash and cash equivalents, credit facilities and projected cash from operations will be sufficient to meet our liquidity needs for at least the next 12 months.

In December 2015, we entered into a second amended and restated credit agreement. The terms of our credit agreement provide for the following facilities: (1) a secured revolving facility of $30.0 million (which may be increased by a maximum of $15.0 million at our request, subject to terms of the credit agreement), the proceeds of which can be used for working capital and general corporate purposes, with a sublimit of $10.0 million for letters of credit; (2) a secured closing date term facility of $4.5 million for the Company; (3) a secured delayed draw term facility of $11.0 million for the Company; and (4) a secured term facility of $9.5 million for Vishay Precision Group Canada ULC ("VPG Canada"), our Canadian subsidiary. The credit agreement terminates on December 30, 2020. The term loans are being repaid in quarterly installments.

Per our credit agreement, borrowings under all facilities bear interest at either, upon our option, (1) a base rate which is the greater of the agent’s prime rate, the Federal Funds rate, or a LIBOR floor, plus a margin of 0.25% or (2) LIBOR plus, depending upon our leverage ratio, an interest rate margin ranging from 2.00% to 3.00%. We are also required to pay a quarterly fee of 0.30% per annum to 0.50% per annum on the unused portion of the secured revolving facility, which is determined based on our leverage ratio each quarter. Additional customary fees apply with respect to letters of credit.

The obligations of VPG and the guarantors under our credit agreement are secured by substantially all the assets (excluding real estate) of VPG, and by pledges of stock in certain domestic and foreign subsidiaries, as well as guarantees by substantially all of our domestic subsidiaries and the assets (excluding real estate) of the guarantors. The VPG Canada term facility is secured by substantially all the assets of VPG Canada, and by a secured guarantee of VPG and our domestic subsidiaries. The credit agreement restricts us from paying cash dividends, and requires us to comply with other customary covenants, representations, and warranties, including the maintenance of specific financial ratios. The financial maintenance covenants include a tangible net worth ratio, a leverage ratio, and a fixed charges coverage ratio. We were in compliance with these covenants at April 2, 2016. If we are not in compliance with any of these covenant restrictions, the credit agreement could be terminated by the lenders, and all amounts outstanding pursuant to the credit agreement could become immediately payable.

We have outstanding exchangeable unsecured notes with a principal amount of approximately $4.1 million, which are exchangeable for an aggregate of 181,537 shares of VPG common stock. The maturity date of these notes is December 13, 2102.

Our other long-term debt is not significant and consists of zero percent interest rate debt held by our Japanese subsidiary of approximately $0.6 million at April 2, 2016 and $0.6 million at December 31, 2015, respectively.

Due to our strong product portfolio and market position, our business has historically generated operating cash flow. This is evident in the three fiscal months ended April 2, 2016, with cash provided by operating activities of $0.7 million. However, our cash used in operating activities for the three fiscal months ended March 28, 2015 was $2.3 million, which primarily resulted from lower net earnings, estimated tax payments and increases in working capital accounts.

We refer to the amount of cash provided by operating activities in excess of our capital expenditure needs and net of proceeds from the sale of assets as “free cash,” a measure which management uses to evaluate our ability to fund acquisitions and repay debt. Free cash is also used as a metric for certain of our performance-based equity compensation awards. We historically have generated positive free cash. However, due to restructuring payments of $1.7 million related to the global cost reduction program announced in November 2015 and changes in working capital accounts, we did not generate free cash in the year-to-date period presented. It is anticipated that we will generate free cash during the remaining months of fiscal year 2016.

The following table summarizes the components of net cash (debt) at April 2, 2016 and December 31, 2015 (in thousands):

April 2, 2016 December 31, 2015
Cash and cash equivalents $61,380 $62,641
Third-party debt, including current and long-term:
Term loans 24,500 25,000
Revolving debt 4,000 4,000
Third-party debt held by Japanese subsidiary 625 614
Exchangeable notes, due 2102 4,097 4,097
Total third-party debt 33,222 33,711
Net cash $28,158 $28,930

Measurements such as “free cash” and “net cash (debt)” do not have uniform definitions and are not recognized in accordance with U.S. GAAP. Such measures should not be viewed as alternatives to U.S. GAAP measures of performance or liquidity. However, management believes that “free cash” is a meaningful measure of our ability to fund acquisitions and repay debt, as well as to measure performance under certain of our equity compensation awards. In addition, management believes that an analysis of “net cash (debt)” assists investors in understanding aspects of our cash and debt management. These measures, as calculated by us, may not be comparable to similarly titled measures used by other companies.

Approximately 81% and 90% of our cash and cash equivalents balance at April 2, 2016 and December 31, 2015, respectively, was held by our non-U.S. subsidiaries. If cash is repatriated to the United States, we would be subject to additional U.S. income taxes (adjusted for foreign tax credits), state income taxes, incremental foreign income taxes, and withholding taxes payable to various foreign countries. See the following table for the percentage of cash and cash equivalents, by region, at April 2, 2016 and December 31, 2015:

April 2, 2016 December 31, 2015
Israel 22% 24%
Asia 24% 26%
Europe 18% 17%
United States 19% 10%
United Kingdom 11% 13%
Canada 6% 10%
100% 100%

Our financial condition as of April 2, 2016 remains strong, with a current ratio (current assets to current liabilities) of 4.0 to 1.0, as compared to a ratio of 3.9 to 1.0 at December 31, 2015.

Cash paid for property and equipment for the three fiscal months ended April 2, 2016 was $2.2 million as compared to $2.8 million in the comparable prior year period. Capital expenditures for the three fiscal months ended April 2, 2016 are comprised of projects related to the normal maintenance of business and expansion related to the production of a certain product line.

Safe Harbor Statement

From time to time, information provided by us, including but not limited to statements in this report, or other statements made by or on our behalf, may contain "forward-looking" information within the meaning of the Private Securities Litigation Reform Act of 1995. Such statements involve a number of risks, uncertainties, and contingencies, many of which are beyond our control, which may cause actual results, performance, or achievements to differ materially from those anticipated.

Such statements are based on current expectations only, and are subject to certain risks, uncertainties, and assumptions. Should one or more of these risks or uncertainties materialize, or should underlying assumptions prove incorrect, actual results may vary materially from those anticipated, expected, estimated, or projected. Among the factors that could cause actual results to materially differ include: general business and economic conditions; changes in the current pace of economic recovery; difficulties or delays in completing acquisitions and integrating acquired companies (including the acquisitions of Stress-Tek and Pacific Instruments); the inability to realize anticipated synergies and expansion possibilities; difficulties in new product development; changes in competition and technology in the markets that we serve and the mix of our products required to address these changes; changes in foreign currency exchange rates; difficulties in implementing our ERP system, and the associated impact on manufacturing efficiencies and customer satisfaction; difficulties in implementing our cost reduction strategies, such as underutilization of production facilities, labor unrest or legal challenges to our lay-off or termination plans, operation of redundant facilities due to difficulties in transferring production to lower-cost countries; and other factors affecting our operations, markets, products, services, and prices that are set forth in our Annual Report on Form 10-K for the fiscal year ended December 31, 2015. We undertake no obligation to publicly update or revise any forward-looking statements, whether as a result of new information, future events, or otherwise.

Market risk

As filed, 273 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

There have been no material changes in the market risks previously disclosed in Part II, Item 7A “Quantitative and Qualitative Disclosures About Market Risk” of our Annual Report on Form 10-K for the fiscal year ended December 31, 2015, filed with the SEC on March 9, 2016.

Controls and procedures

As filed, 1,308 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Disclosure Controls and Procedures

An evaluation was performed under the supervision and with the participation of our management, including the Chief Executive Officer (“CEO”) and Chief Financial Officer (“CFO”), of the effectiveness of the design and operation of our disclosure controls and procedures, as such term is defined under Rule 13a-15(e) and Rule 15d-15(e) promulgated under the Securities Exchange Act of 1934, as amended (the “Exchange Act”). Based on that evaluation, our CEO and CFO concluded that our disclosure controls and procedures were effective as of the end of the period covered by this quarterly report to ensure that information required to be disclosed in reports that we file or submit under the Exchange Act are: (1) recorded, processed, summarized, and reported within the time periods specified in the SEC’s rules and forms; and (2) accumulated and communicated to our management, including our CEO and CFO, as appropriate to allow timely decisions regarding required disclosure.

Changes in Internal Control over Financial Reporting

During our last fiscal quarter ended April 2, 2016, there was no change in our internal control over financial reporting that materially affected, or is reasonably likely to materially affect, internal control over financial reporting.

Risk factors

As filed, 595 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

In addition to the other information set forth in this Form 10-Q, you should carefully consider the factors discussed in Part I, Item 1A “Risk Factors” of our Annual Report on Form 10-K for the fiscal year ended December 31, 2015, filed with the SEC on March 9, 2016. The risks described in our Form 10-K are not the only risks that we face. Additional risks not presently known to us, or that we do not currently consider significant, may also have an adverse effect on us. If any of the risks actually occur, our business, results of operations, cash flows or financial condition could suffer.

Figures reported in this filing

Standardized line items from the XBRL in this filing, for the period ended 2016-04-02. Comparative periods it repeats are left out.

Figures reported in this filing
Line itemPeriodValueXBRL concept
Revenue3 months2016-01-01 to 2016-04-02$56.6mus-gaap:Revenues
Cost of revenue3 months2016-01-01 to 2016-04-02$36.9mus-gaap:CostOfGoodsSold
Gross profit3 months2016-01-01 to 2016-04-02$19.8mus-gaap:GrossProfit
Selling, general and administrative3 months2016-01-01 to 2016-04-02$18.0mus-gaap:SellingGeneralAndAdministrativeExpense
Operating income3 months2016-01-01 to 2016-04-02$990.0kus-gaap:OperatingIncomeLoss
Interest expense3 months2016-01-01 to 2016-04-02$328.0kus-gaap:InterestExpense
Income tax3 months2016-01-01 to 2016-04-02$591.0kus-gaap:IncomeTaxExpenseBenefit
Net income3 months2016-01-01 to 2016-04-02$480.0kus-gaap:NetIncomeLoss
Diluted EPS3 months2016-01-01 to 2016-04-02$0.04us-gaap:EarningsPerShareDiluted
Basic EPS3 months2016-01-01 to 2016-04-02$0.04us-gaap:EarningsPerShareBasic
Diluted shares (weighted)3 months2016-01-01 to 2016-04-0213,399,000 sharesus-gaap:WeightedAverageNumberOfDilutedSharesOutstanding
Operating cash flow3 months2016-01-01 to 2016-04-02$651.0kus-gaap:NetCashProvidedByUsedInOperatingActivities
Capital expenditure3 months2016-01-01 to 2016-04-02$2.2mus-gaap:PaymentsToAcquireProductiveAssets
Share repurchases3 months2016-01-01 to 2016-04-02$0us-gaap:PaymentsForRepurchaseOfCommonStock
Cash and equivalentsAt period end2016-04-02$61.4mus-gaap:CashAndCashEquivalentsAtCarryingValue
Current assetsAt period end2016-04-02$162.3mus-gaap:AssetsCurrent
Total assetsAt period end2016-04-02$265.2mus-gaap:Assets
Current liabilitiesAt period end2016-04-02$40.1mus-gaap:LiabilitiesCurrent
Total liabilitiesAt period end2016-04-02$90.0mus-gaap:Liabilities
Long-term debtAt period end2016-04-02$30.5mus-gaap:LongTermDebtNoncurrent
Current portion of debtAt period end2016-04-02$2.2mus-gaap:LongTermDebtCurrent
Shareholders' equityAt period end2016-04-02$175.0mus-gaap:StockholdersEquity

Source: SEC EDGAR, the filing index for accession 0001487952-16-000082. Last ingested by Listed: Nov 4, 2026, 08:34 ET. Listed shows no prices and gives no investment advice.