Listed

Syntec Optics Holdings, Inc.: Form 10-Q for the period ended Mar 31, 2024

Filed with the SEC on May 23, 2024 and accepted by EDGAR at May 23, 2024, 15:10 ET.

Share

Management's discussion and analysis

As filed, 29,861 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

The information in this Management’s Discussion and Analysis should be read in conjunction with the accompanying unaudited condensed financial statements and notes.

Cautionary Note Regarding Forward-Looking Statements

This report includes forward-looking statements within the meaning of Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), and the Private Securities Litigation Reform Act of 1995. The words “believe,” “may,” “estimate,” “continue,” “anticipate,” “intend,” “should,” “plan,” “could,” “target,” “potential,” “is likely,” “will,” “expect” and similar expressions are intended to identify forward-looking statements. All statements other than statements of historical facts contained in this report, including among others, our strategy, future operations, future financial position, future revenue, projected costs, prospects, plans, objectives of management and expected market growth are forward-looking statements. Our actual results and financial condition may differ materially from those express or implied in such forward-looking statements. Therefore, you should not rely on any of these forward-looking statements.

For a further list and description of various risks, relevant factors and uncertainties that could cause future results or events to differ materially from those expressed or implied in our forward-looking statements, see the “Risk Factors” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” sections in this report, our Annual Report on Form 10-K for the fiscal year ended December 31, 2021, and our other filings with the Securities and Exchange Commission (the “SEC”). All forward-looking statements in this report are made only as of the date hereof or as indicated and represent our views as of the date of this report. Factors or events that could cause our actual results to differ may emerge from time to time, and it is not possible for us to predict all of them. We undertake no obligation to publicly update or revise any forward-looking statements, whether as the result of new information, future events or otherwise, except as required by law.

Overview

Syntec Optics is vertically integrated from design and component manufacturing for lens system assembly to imaging module integration for system solutions. Making our own tools, molding, and nanomachining allows close interaction and recut ability, enabling special techniques to hold tolerances up to sub-micron level. Syntec has assembled a world class design for manufacturability team to augment its production team with deep expertise to fully leverage our vertical integration from component making to optics and electronics assembly. Syntec Optics has steadily developed variety of other complementary manufacturing techniques to provide a wide suite of horizontal capabilities including thin films deposition coatings, glass molding, polymer molding, tool-making, mechanicals manufacturing, and nanomachining.

Syntec became a leader in the industry by pioneering polymer-based optics and then subsequently adding glass optics and optics made from other materials including crystals and metals. Polymer-based optics provide numerous advantages compared to incumbent glass-based optics. Polymer-based optics are smaller, lower weight, lower cost, and offer very high-performance optical solutions. For all these reasons, Syntec is able to deliver products to our clients that are lighter, smaller, and suitable for cutting edge technology products, including the newly evolving silicon photonics industry.

Our designs and assembly processes are developed in-house in the United States. In 2016, Syntec Optics expanded its manufacturing facility to nearly 90,000 square-feet, allowing us to increase our production capacity and offer additional advanced manufacturing processes under one roof which provide us the ability to increase sales to existing customers and increase penetration of our end-markets. Our facility provides a streamlined, partially autonomous production process for our current customers, which comprises optical assembly, electro-optics assembly, polymer optics molding, glass optics molding, opto-mechanical assembly, nanomachining and thin films coating. Our facility also provides availability to expand the number of advanced manufacturing processes to handle increased volumes of existing and new customer orders.

Syntec Optics focuses on four end markets of defense, medical, consumer, and communications all with several mission-critical applications with strong tailwinds.

In 2023, Syntec Optics launched low weight night vision optics and further, announced hybrid light-weight magnifier and thermal clip on in the defense end market. Also, in 2023, Syntec Optics announced biomedical mirrors for sensing in the medical end market. Rounding out new product launches for 2023, in the communication end market, Syntec Optics launched microlens arrays and low earth satellite optics.

The Business Combination

On November 7, 2023, or the Closing Date, we consummated the Business Combination. Pursuant to the Business Combination Agreement, Merger Sub merged with and into Legacy Syntec, with Legacy Syntec surviving the merger and becoming a wholly-owned direct subsidiary of OmniLit. Thereafter, Merger Sub ceased to exist and OmniLit was renamed Syntec Optics Holdings, Inc. Legacy Syntec is deemed the accounting acquirer, which means that Legacy Syntec’s financial statements for previous periods will be disclosed in our future periodic reports filed with the SEC. Following the Business Combination, our business is the business of Legacy Syntec.

The Business Combination was accounted for as a reverse recapitalization. Under this method of accounting, OmniLit was treated as the acquired company for financial statement reporting purposes.

Key Factors Affecting Our Operating Results

Our financial position and results of operations depend to a significant extent on the following factors:

End Market Consumers

The demand for our products ultimately depends on demand from customers in our current end markets. We generate sales through (1) Tier 1 suppliers and (2) through OEMs.

An increasing proportion of our sales has been and is expected to continue to be derived from sales to defense. biomedical and industrial/consumer OEMs, driven by continued efforts to develop and expand sales to OEMs with whom we have longstanding relationships. Future OEM sales will be subject to risks and uncertainties, including the number of defense, biomedical and industrial/consumer products these OEMs manufacture and sell, which in turn may be driven by the expectations these OEMs have around end market demand.

Demand from end markets is impacted by a number of factors, including travel restrictions (global pandemics or geo-political conflicts), fuel costs and energy demands (including an increasing trend towards the use of green energy), as well as overall macro-economic conditions. Sales of our optics and photonics enabled components and sub-components have also benefited from the increased global conflict, the United States dynamic relationships with other world powers that may have a conflicting view with western-style democracy, the movement towards reshoring of advanced manufacturing, biomedical components and sub-components needed to support physicians in their battle against global pandemics, and the increased global demand for high-fidelity data communications on all corners of the globe.

Syntec Optics plans to further add bolt-on acquisitions for inorganic growth in the fragmented photonics industry by expanding our portfolio of our existing, U.S.-based, advanced manufacturing processes of making thin-film coated glass, crystal, or polymer components and their housings, which are ultimately assembled into high performance hybrid electro-optics sub-systems. By doing so, Syntec Optics plans to grow to the new end markets of communications and sensing. Syntec Optics entered the communications end market in 2023. Syntec Optics is currently engaged as a supplier for a U.S. Department of Commerce’s National Institute of Standards and Technology (NIST) funded research and development project for the sensing end market. The communication end market is characterized by the use of optics and photonics for data transmittal and reception of information, including, for example, satellite communications and other associated applications. The sensing end-market is characterized by the use of optics and photonics to detect scattered light or light with an altered refractive index due to the presence of a medium within a wide range of potential applications, including, for example, disease detection and other associated applications.

Supply

We currently rely on strategically selected electronics, highly engineered polymers and aluminum manufacturers located in the United States to manufacture our highly specialized optic and photonics enabled components and sub-components, and we intend to continue to rely on these suppliers going forward. Our close working relationships with our Unites States based suppliers, reflected in our ability to (x) increase our purchase order volumes (qualifying us for related volume-based discounts) and (y) order and receive delivery of raw materials in anticipation of required demand, has helped us moderate increased supply-related costs associated with inflation and to avoid potential shipment delays. To mitigate against potential adverse production events, we opted to build our inventory of key raw materials. In connection with these stockpiling activities, we experienced an increase in prepaid inventory compared to prior periods as suppliers required upfront deposits in response to supply chain disruptions.

As a result of the active steps we have taken to manage our inventory levels, we have not been subject to the shortages or price impacts that have been present for manufacturers of optic and photonic enabled components or sub-components.

Product and Customer Mix

Our sales consist of sales of highly specialized optic and photonic enabled components and sub-components. These products are sold to different customer types (e.g., OEMs and Tier 1 manufacturers) and at different prices and involve varying levels of costs. In any particular period, changes in the mix and volume of particular products sold and the prices of those products relative to other products will impact our average selling price and our cost of goods sold. The price of our products may also increase as a result of increases in the cost of components due to inflation, labor and raw materials. The Company generated 53% of revenues for the three months ended March 31, 2024 from three customers and 44% of revenues for the three months ended March 31, 2023 from three customers. In addition, revenues from these larger customers may fluctuate from time to time based on these customers’ business needs and customer experience, the timing of which may be affected by market conditions or other factors outside of our control. These customers have a broad product purchase mix across various departments of Syntec Optics. Syntec Optics supplies several mission critical components and sub-components to these customers that are not tied to a single application, customer initiative, or purchase order. We expect sales to increase as we further advance our full-system design expertise and product offerings and customers increasingly demand more sophisticated systems, rather than drop-in replacements. In addition to the impacts attributable to the general sales mix across our products, our results of operations are impacted by the relative margins of products sold. As we continue to introduce new products at varying price points, our overall gross margin may vary from period to period as a result of changes in product and customer mix.

Production Capacity

All of our design, advanced manufacturing and assembly currently takes place at our nearly 90,000 square foot headquarters and manufacturing facility located in Rochester, New York. We currently operate optical, opto-mechanical and electro-optical assembly lines in addition to molding, nanomachining, testing and thin-film production lines. Consistent with our operating history, we plan to continue to automate additional aspects of our advanced manufacturing operations. Our existing facility has the capacity to add additional production lines and construct and operate pilot production lines for new components and sub-components, all designed to maximize the capacity of our manufacturing facility. Although our automation efforts are expected to reduce our costs of goods, we may not fully recognize the anticipated savings when planned and could experience additional costs or disruptions to our production activities.

Competition

We compete with traditional glass optic manufacturers and electro-optic manufacturers, who primarily either import their products or components or manufacture products under a private label. As we continue to expand into new markets, develop new products and move towards production of our polymer based and glass-polymer based optic hybrids and photonics enabled components and sub-components, we will experience competition with a wider range of companies. These competitors may have greater resources than we do and may be able to devote greater resources to the development of their current and future technologies. Our competitors may be able to source materials and components at lower costs, which may require us to evaluate measures to reduce our own costs, lower the price of our products or increase sales volumes in order to maintain our expected levels of profitability.

Research and Development

Our research and development are primarily focused on the advanced manufacturing of polymer and glass-polymer based optic and photonics enabled components and sub-components. The next stage in our technical development is to construct our products to optimize performance, lower weight and increase longevity to meet and exceed industry standards for our target end markets. Ongoing testing and optimizing of more complicated systems and sub-systems for our existing end markets will assist us in increasing penetration in our current end markets and expanding into targeted end markets.

Components of Results of Operations

Net Sales

Net sales are primarily generated from the sale of our optics and photonics enabled components and sub-components to OEMs.

Cost of Goods Sold

Cost of goods sold includes the cost of raw materials and other components of our optic and photonic enabled components and sub-components, labor, overhead, utilities, and depreciation and amortization.

Gross Profit

Gross profit, calculated as net sales less cost of goods sold, may vary between periods and is primarily affected by various factors including average selling prices, product costs, product mix, customer mix and production volumes.

Operating Expenses

General and Administrative

General and administrative costs include personnel-related expenses attributable to our executive, finance, human resources, and information technology organizations, certain facility costs, and fees for professional services.

Total Other Income (Expense)

Other income (expense) consists primarily of interest expense and debt issuance costs.

Results of Operations

Comparisons for the Three months ended March 31, 2024 and March 31, 2023

The following table sets forth our results of operations for the three months ended March 31, 2024 and 2023. This data should be read together with our financial statements and related notes included elsewhere in this Quarterly Report, and is qualified in its entirety by reference to such financial statements and related notes.

(in thousands)

Three Months Ended March 31, 2024 % Net Sales 2023 % Net Sales
Net Sales $6,255,908 100% 6,884,436 100%
Cost of Goods Sold 5,548,465 89% 5,172,735 75%
Gross profit 707,443 11% 1,711,701 25%
General and administrative 2,114,543 34% 1,517,961 22%
(Loss) Income From Operations (1,407,100) (22%) 193,740 3%
Other Income (Expense), Net
Other Income 19,349 0% 751 0%
Interest Income (Expense) (159,867) (3%) (130,021) (2%)
Total Other (Expense) Income, Net (140,518) (2%) (129,270) (2%)
(Loss) Income Before Taxes -1,547,618 (25%) 64,470 1%
(Benefit From) Income Tax (338,475) (5%) 11,448 0%
Net (Loss) Income $(1,209,143) (19%) $53,022 1%

15

Net Sales

Net sales decreased by $0.6 million, or 9.1%, to $6.3 million for the three months ended March 31, 2024, as compared to $6.9 million for the three months ended March 31, 2023. This decrease was primarily due to a decrease of $2.3 million spread across the medical, consumer and defense end markets offset by an increase of $1.7 million in the communications end market.

Cost of Goods Sold

Cost of revenue increased by $0.3 million, or 7.3%, to $5.5 million for the three months ended March 31, 2024, as compared to $5.2 million for the three months ended March 31, 2023. This increase was primarily due to increases in $0.2 million of payroll costs and $0.1 million of subcontractor costs.

Gross Profit

Gross profit decreased by $1.0 million, or 58.7%, to $0.7 million for the three months ended March 31, 2024, as compared to $1.7 million for the three months ended March 31, 2023. This decrease was primarily due to the decrease in revenue and the increase in cost of goods sold.

General and Administrative Expenses

General and administrative expenses increased by $0.6 million, or 39.3%, to $2.1 million for the three months ended March 31, 2024, as compared to $1.5 million for the three months ended March 31, 2023. This increase was primarily due to an approximately $0.2 million increase in professional fees, and $0.2 million in advertising expenses and increase of $0.1 million in insurance, and $0.1 million in research and development expenses.

Total Other Income (Loss)

Other income (expense) increased by $0.01 million, or 8.7%, to ($0.14) million for the three months ended March 31, 2024, as compared to other income (expense) of ($0.13) million for the three months ended March 31, 2023. This increase was primarily due to interest expense due to increased rates for the debt facilities.

Income Tax Expense (Benefit from)

Income tax expense (benefit) decreased by ($0.3) million, or 3,056.7%, to ($0.3) million for the three months ended March 31, 2024, as compared to $0.01 million for the three months ended March 31, 2023. This increase was primarily due to the increase in net loss.

Net Income (Loss)

Net income decreased by $1.3 million, or 2,380.4%, to ($1.2) million for the three months ended March 31, 2024, as compared to $0.05 million for the three months ended March 31, 2023. This decrease was primarily due to a decrease in sales of $0.6 million, an increase in cost of goods sold of $0.3 million, and an increase in general and administrative expenses of $0.6 million offset by an increase of benefit from income tax of $0.3 million.

Critical Accounting Estimates

Our condensed consolidated financial statements have been prepared in accordance with generally accepted accounting principles in the United States. The preparation of these condensed consolidated financial statements requires us to make judgments and estimates that affect the reported amounts of assets, liabilities, revenues and expenses, and the disclosure of contingent assets and liabilities in our financial statements. We base our estimates on historical experience, known trends and events and various other factors that we believe are reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Our actual results may differ from these estimates under different assumptions or conditions. On a recurring basis, we evaluate our judgments and estimates in light of changes in circumstances, facts, and experience. The effects of material revisions in an estimate, if any, will be reflected in the consolidated financial statements prospectively from the date of the change in the estimate.

We believe that the following accounting policies are those most critical to the judgments and estimates used in the preparation of our financial statements.

Inventory Valuation

We periodically review physical inventory for excess, obsolete, and potentially impaired items and reserves. Any such inventory is written down to net realizable value. The reserve estimate for excess and obsolete inventory is dependent on expected future use and requires management judgement.

Warrants

We account for warrants as either equity-classified or liability-classified instruments based on an assessment of the warrant’s specific terms and applicable authoritative guidance in Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”) 480, Distinguishing Liabilities from Equity (“ASC 480”) and ASC 815, Derivatives and Hedging (“ASC 815”). The assessment considers whether the warrants are freestanding financial instruments pursuant to ASC 480, meet the definition of a liability pursuant to ASC 480, and whether the warrants meet all of the requirements for equity classification under ASC 815, including whether the warrants are indexed to our own ordinary share, among other conditions for equity classification. This assessment, which requires the use of professional judgment, is conducted at the time of warrant issuance and as of each subsequent quarterly period end date while the warrants are outstanding.

For issued or modified warrants that meet all of the criteria for equity classification, the warrants are required to be recorded as a component of additional paid-in-capital at the time of issuance. For issued or modified warrants that do not meet all the criteria for equity classification, the warrants are required to be recorded at their initial fair value on the date of issuance, and each balance sheet date thereafter. Changes in the estimated fair value of the warrants are recognized as a non-cash gain or loss on the statements of operations.

Income Taxes

We account for income taxes using the asset and liability method. Under this method, deferred tax assets and liabilities are recognized for the future tax consequences of temporary differences between the carrying amounts and tax bases of assets and liabilities using enacted rates. The effect of a change in tax rates on deferred taxes is recognized in income in the period that includes the enactment date.

We recognize the financial statement effect of an uncertain income tax position when it is more likely than not, based on the technical merits, that the position will be sustained upon examination. Recognized income tax positions are measured at the largest amount that is greater than 50% likely to be realized. A valuation allowance is recorded to reduce deferred income tax assets to an amount, which in the opinion of management is more likely than not to be realized.

Management judgment is required in determining our provision for income taxes, our deferred tax assets and liabilities, and any valuation allowance recorded against our deferred tax assets. We consider factors such as the cumulative income or loss in recent years; reversal of deferred tax liabilities; projected future taxable income exclusive of temporary differences; the character of the income tax asset, including income tax positions; tax planning strategies and the period over which we expect the deferred tax assets to be recovered in the determination of the valuation allowance. In the event that actual results differ from these estimates, or we adjust our estimates in the future, we may need to adjust our valuation allowance, which could materially impact our financial position and results of operations.

Non-GAAP Financial Measures

This Quarterly Report includes a non-generally accepted account principles within the United States (“U.S. GAAP”) measure that we use to supplement our results presented in accordance with U.S. GAAP. EBITDA is defined as earnings before interest and other income, tax and depreciation and amortization. Adjusted EBITDA is calculated as EBITDA adjusted for non-recurring items, and business combination expenses. Adjusted EBITDA is a performance measure that we believe is useful to investors and analysts because it illustrates the underlying financial and business trends relating to our core, recurring results of operations and enhances comparability between periods.

Adjusted EBITDA is not a recognized measure under U.S. GAAP and is not intended to be a substitute for any U.S. GAAP financial measure and, as calculated, may not be comparable to other similarly titled measures of performance of other companies in other industries or within the same industry. Investors should exercise caution in comparing our non-GAAP measure to any similarly titled measure used by other companies. This non-GAAP measure excludes certain items required by U.S. GAAP and should not be considered as an alternative to information reported in accordance with U.S. GAAP.

Adjusted EBITDA

We define adjusted EBITDA, a non-GAAP financial measure, as net earnings (loss) before interest and other expenses, net, income tax expense, depreciation and amortization, as adjusted to exclude non-recurring items. We utilize adjusted EBITDA as an internal performance measure in the management of our operations because we believe the exclusion of these non-cash and non-recurring charges allow for a more relevant comparison of our results of operations to other companies in our industry and is in accordance with the Non-GAAP Financial Measures Compliance & Disclosure Interpretations (Reference Question 102.03).

The table below presents our adjusted EBITDA, reconciled to net income for the three months ended March 31, 2024 and 2023.

NON-GAAP RECONCILIATION OF ADJUSTED EBITDA

FOR THE THREE MONTHS ENDED MARCH 31, 2024 AND 2023

2024 2023
Net (Loss) Income $(1,209,143) $53,022
Depreciation & Amortization 697,799 726,650
Interest Expenses 157,894 127,309
Taxes (338,475) 11,448
Non-Recurring Items
Non-Recurring Transaction Fees 25,265 -
Non-Recurring Contributions, Management Fees & Expenses - 81,258
Adjusted EBITDA $(666,660) $999,687

17

Liquidity and Capital Resources

Liquidity describes the ability of a company to generate sufficient cash flows to meet the cash requirements of its business operations, including working capital needs, debt service, acquisitions, contractual obligations and other commitments. We assess liquidity in terms of our cash flows from operations and their sufficiency to fund our operating and investing activities. As of March 31, 2024, our principal sources of liquidity were cash totaling $1.7 million and a line of credit with $4.6 million available.

Significant factors affecting the management of our ongoing cash requirements are the adequacy of available bank lines of credit and our ability to attract long-term capital with satisfactory terms. The sources of our liquidity are subject to all of the risks of our business and could be adversely affected by, among other factors, risks associated with events outside of our control, such as economic consequences of global pandemics and geopolitical conflicts, monetary policy changes in the U.S. and other countries and their impact on the global financial markets, supply chain disruptions and electronics and other material shortages, a decrease in demand for our products, our ability to integrate current and future acquisitions, deterioration in certain financial ratios, availability of borrowings under our revolving credit facility, and other market changes in general. See “Risks Relating to Syntec Optics’ Financial Position and Capital Requirements” included in Item 1A of our Annual Report on Form 10-K for the fiscal year ended December 31, 2023.

Cash Flow — Three months ended March 31, 2024 and 2023

Three Months Ended March 31, 2024 2023
Net Cash (Used in) Provided by Operating Activities $(289,841) $526,739
Net Cash Used in Investing Activities (95,218) (226,871)
Net Cash Used in Financing Activities (88,878) (292,486)

Operating Activities

Net cash used in operating activities was $0.2 million for the three months ended March 31, 2024, as compared to net cash provided by operating activities of $0.5 million for the three months ended March 31, 2023. The primary drivers for the year-over-year change include a decrease to accounts receivable of $1.7 million, and an increase to net loss of $1.2 million.

Investing Activities

Net cash used in investing activities was $0.1 million for the three months ended March 31, 2024, as compared to net cash used in investing activities of $0.2 million for the three months ended March 31, 2023. The net cash used in investing activities decreased primarily due to a decrease in capital expenditures of $0.1 million.

Financing Activities

Net cash used in financing activities was $0.1 million for the three months ended March 31, 2024, and was primarily due to payment of term loans. Net cash used in financing activities was $0.3 million for the three months ended March 31, 2023, and was primarily due to payment of term loans.

Market risk

As filed, 337 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Our primary market risk exposure is interest rate sensitivity. During the three months ended March 31, 2024, there have been no material changes to the information included under Part II, Item 7A, “Quantitative and Qualitative Disclosures About Market Risk,” in our Annual Report on Form 10-K for the fiscal year ended December 31, 2023.

Controls and procedures

As filed, 3,965 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Evaluation of Disclosure Controls and Procedures

As required by Rule 13a-15 under the Exchange Act, we have carried out an evaluation of the effectiveness of our disclosure controls and procedures as of the end of the period covered by this Report. This evaluation was carried out under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer.

Disclosure controls and procedures are controls and other procedures that are designed to ensure that information required to be disclosed in our reports filed or submitted under the Exchange Act is recorded, processed, summarized and reported, within the time periods specified in the SEC’s rules and forms. Disclosure controls and procedures include controls and procedures designed to ensure that information required to be disclosed in our company’s reports filed under the Exchange Act is accumulated and communicated to management, including our Chief Executive Officer and Chief Financial Officer, to allow timely decisions regarding required disclosure. In designing and evaluating the disclosure controls and procedures, management recognizes that any controls and procedures, no matter how well designed and operated, cannot provide absolute assurance that the objectives of the controls system are met, and no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within a company have been detected. Based on the evaluation of our disclosure controls and procedures as of March 31, 2024, our Chief Executive Officer and our Chief Financial Officer concluded that, as of such date, our disclosure controls and procedures were not effective due to the following identified material weaknesses:

1. We lack documentation of formal internal control process and controls including lack of review of journal entries.

2. We lack necessary corporate accounting resources to maintain adequate segregation of duties.

3. We lack timely reconciliation controls in the areas of accounts payable, accrued legal expenses, and inventory.

4. We lack controls related to proper cut-off of costs of goods sold and other income from business interruption claim.

5. We lack control related to identification and disclosure of related party transactions.

6. We lack control related to proper fair value methodology utilized for valuation of complex financial instrument in connection with contingent earnout arrangement.

7. We lack the necessary information technology (“IT”) general controls infrastructure in the areas of user access and program change-management due to insufficient documentation and training, and inadequate IT risk assessment process. Additionally, we lack controls around the review of SOC-1 reports and lack of cyber security related controls.

The Company is instituting controls and procedures that we expect will improve the effectiveness of the Company’s disclosure controls and procedures.

Management’s Report on Internal Control over Financial Reporting

This Report does not include a report of management’s assessment regarding internal control over financial reporting or an attestation report of the Company’s registered public accounting firm due to a transition period established by rules of the SEC for newly public companies. Additionally, our auditors will not be required to formally opine on the effectiveness of our internal control over financial reporting pursuant to Section 404 until we are no longer an “emerging growth company” as defined in the JOBS Act.

Changes in Internal Control over Financial Reporting

Other than the material weaknesses and remediation efforts mentioned above, there were no changes in our internal controls over financial reporting that occurred during the quarter ended March 31, 2024 that materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

Risk factors

As filed, 656 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

The Company’s risk factors are described in Part I, Item 1A, “Risk Factors”, of the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2023. The risks described in our Annual Report on Form 10-K for the fiscal year ended December 31, 2023 are not the only risks we face. Additional risks and uncertainties not currently known to us or that we currently deem to be immaterial also may materially adversely affect our business, financial position, or future results of operations. The risk factors should be read together with, the risk factors described in our Annual Report on Form 10-K for the fiscal year ended December 31, 2023.

Figures reported in this filing

Standardized line items from the XBRL in this filing, for the period ended 2024-03-31. Comparative periods it repeats are left out.

Figures reported in this filing
Line itemPeriodValueXBRL concept
Revenue3 months2024-01-01 to 2024-03-31$6.3mus-gaap:RevenueFromContractWithCustomerExcludingAssessedTax
Cost of revenue3 months2024-01-01 to 2024-03-31$5.5mus-gaap:CostOfRevenue
Gross profit3 months2024-01-01 to 2024-03-31$707.4kus-gaap:GrossProfit
Operating income3 months2024-01-01 to 2024-03-31−$1.4mus-gaap:OperatingIncomeLoss
Income tax3 months2024-01-01 to 2024-03-31−$338.5kus-gaap:IncomeTaxExpenseBenefit
Net income3 months2024-01-01 to 2024-03-31−$1.2mus-gaap:NetIncomeLoss
Diluted EPS3 months2024-01-01 to 2024-03-31−$0.03us-gaap:EarningsPerShareDiluted
Basic EPS3 months2024-01-01 to 2024-03-31−$0.03us-gaap:EarningsPerShareBasic
Diluted shares (weighted)3 months2024-01-01 to 2024-03-3136,688,266 sharesus-gaap:WeightedAverageNumberOfDilutedSharesOutstanding
Operating cash flow3 months2024-01-01 to 2024-03-31−$289.8kus-gaap:NetCashProvidedByUsedInOperatingActivities
Capital expenditure3 months2024-01-01 to 2024-03-31$95.2kus-gaap:PaymentsToAcquirePropertyPlantAndEquipment
Cash and equivalentsAt period end2024-03-31$1.7mus-gaap:Cash
Current assetsAt period end2024-03-31$13.6mus-gaap:AssetsCurrent
Total assetsAt period end2024-03-31$24.6mus-gaap:Assets
Current liabilitiesAt period end2024-03-31$9.8mus-gaap:LiabilitiesCurrent
Total liabilitiesAt period end2024-03-31$12.8mus-gaap:Liabilities
Long-term debtAt period end2024-03-31$3.0mus-gaap:LongTermDebtNoncurrent
Current portion of debtAt period end2024-03-31$447.7kus-gaap:LongTermDebtCurrent
Shareholders' equityAt period end2024-03-31$11.9mus-gaap:StockholdersEquity

Source: SEC EDGAR, the filing index for accession 0001493152-24-021132. Last ingested by Listed: Nov 15, 2026, 00:17 ET. Listed shows no prices and gives no investment advice.