Listed

Newton Golf Company, Inc.: Form 10-Q for the period ended Jun 30, 2026

Filed with the SEC on Aug 14, 2026 and accepted by EDGAR at Aug 14, 2026, 16:16 ET.

Share

Management's discussion and analysis

As filed, 49,076 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

The following discussion and analysis of our financial condition and results of operations should be read in conjunction with our financial statements and the related notes appearing elsewhere in this Quarterly Report. This discussion and analysis may contain forward-looking statements based on assumptions about our future business. Our actual results could differ materially from those anticipated in these forward-looking statements as a result of certain factors, including but not limited to those set forth under “Risk Factors” in our Annual report on Form 10-K for the year ended December 31, 2025 and in this Quarterly Report.

Executive Summary

During the three and six months ended June 30, 2026, several factors influenced the Company’s operations and financial position, including:

  • New product introduction. The Company introduced the Fast Motion fairway wood shaft and hybrid shafts at the 2026 PGA Show, which are expected to launch commercially during the fourth quarter of 2026 or the first quarter of 2027.
  • Capital raising activities. On March 16, 2026, the Company entered into the Purchase Agreement providing for the issuance, in one or more closings, of Convertible Notes with an aggregate principal amount of up to $2.0 million, together with Warrants to purchase shares of the Company’s common stock at an exercise price of $1.75 per share, subject to adjustment. On May 28, 2026, the Company’s Board of Directors approved an amendment increasing the maximum aggregate principal amount of Convertible Notes available under the Purchase Agreement to $3.0 million.

During the six months ended June 30, 2026, the Company issued an aggregate principal amount of $2.25 million of Convertible Notes pursuant to the Purchase Agreement. The Convertible Notes bear interest at 10% per annum, mature 18 months from issuance, and are convertible, together with accrued interest, into shares of the Company’s common stock at a conversion price of $1.60 per share at maturity. In connection with these issuances, the Company also issued five-year Warrants to purchase an aggregate of 225,000 shares of common stock at an exercise price of $1.75 per share. Net proceeds from these financings were used for working capital and general corporate purposes (see Notes 8 and 9).

Subsequent to June 30, 2026, the Company entered into a $5.0 million senior secured revolving credit facility, which matures on July 1, 2028 and bears interest at Daily Simple SOFR plus 13%, and completed the exchange of approximately $2.3 million of outstanding Convertible Notes, including accrued interest, for Series A Convertible Preferred Stock. These transactions increased available liquidity, reduced outstanding indebtedness, and increased stockholders’ equity. On August 14, 2026, the Company also completed a private placement financing at a purchase price of $1.33 per share for aggregate gross proceeds of approximately $1.0 million and net proceeds of approximately $880,000.

  • Manufacturing transition activities. In conjunction with the manufacturing transition undertaken during the spring of 2026, the Company introduced updated versions of its Fast Motion driver shaft and Motion driver and fairway shafts. The updated products, referred to as the Company’s “2.0” shafts and differentiated by green product logos, incorporate refinements to the Company’s manufacturing techniques, equipment utilization, bend profiles, product specifications and production tolerances.

The 2.0 shafts were designed to provide more consistent performance characteristics, tighter ball-flight dispersion, improved continuity between driver and fairway shaft specifications and a broader fitting profile across different player types. The Company believes these refinements also provide greater manufacturing consistency and tighter production tolerances. The updated shafts have experienced strong initial adoption among professional players using Newton Golf products on various professional tours, including significant conversion from prior-generation shafts to the 2.0 products and recent adoption of the updated Motion fairway wood shaft by multiple players on the PGA TOUR Champions.

As part of this transition, the Company implemented updates to certain shaft manufacturing recipes and related production processes, including recalibration of machining operations, modifications to finishing workflows, changes to paint mixtures, and maintenance activities designed to improve product quality, production consistency, and manufacturing scalability.

The Company also experienced temporary carbon fiber supply constraints, which, together with the manufacturing transition activities, reduced production throughput and delayed the fulfillment of certain customer orders. As a result, the Company temporarily moderated its marketing activities to better align demand with available manufacturing capacity and avoid generating demand beyond its ability to fulfill customer orders on a timely basis.

Subsequent to quarter end, the Company secured additional carbon fiber supply from Toray Japan, while availability from Toray U.S. improved. As manufacturing capacity and raw material availability improved, the Company began selectively resuming marketing initiatives in late July 2026 and increasing production of its updated 2.0 shaft products. Marketing activity remains below historical levels as the Company transitions to a new marketing agency and has not yet fully ramped paid media expenditures.

Marketing Strategy. During the quarter, the Company evaluated its direct-to-consumer strategy and implemented changes intended to improve the efficiency and effectiveness of its customer acquisition efforts. As part of this initiative, the Company engaged a new marketing agency to oversee its direct-to-consumer business, refine the Company’s brand messaging, diversify customer acquisition channels, and broaden awareness of the Company’s proprietary shaft technology among golfers. Sales and marketing expenses decreased approximately $1.0 million during both three and six months ended June 30, 2026 compared with the corresponding prior-year periods, reflecting the Company’s decision to moderate marketing expenditures while manufacturing capacity and raw material availability were constrained.

During the manufacturing transition and periods of constrained raw material availability, the Company intentionally moderated marketing expenditures to align customer demand with available production capacity. With manufacturing throughput improving and additional carbon fiber supply secured, the Company has resumed its marketing initiatives.

Company Overview

We design, manufacture, and sell performance golf equipment, including premium golf shafts and putters, and focus on developing technology-driven golf products intended to enhance player performance.

We sell our products through direct-to-consumer channels, including our websites, as well as through resellers, professional club fitters, distributors, and golf retailers. We currently distribute products primarily in the United States, with additional distribution in international markets including Japan and South Korea.

Management continues to focus on expanding distribution through professional club fitters, retail partners, and international distributors.

Newton Motion Shafts

Products

The Newton Motion™ shaft platform continues to represent the Company’s primary product category and the principal driver of revenue during the six months ended June 30, 2026.

During the second quarter of 2026, the Company introduced updated versions of its Fast Motion driver shaft and Motion driver and fairway shafts. These updated “2.0” products incorporate refinements to shaft design, manufacturing techniques, bend profiles, product specifications and production tolerances, and are differentiated from prior-generation products by green product logos.

The Company also introduced the Fast Motion fairway wood shaft and hybrid shafts at the 2026 PGA Show, which are expected to launch commercially during the fourth quarter 2026 or the first quarter of 2027.

Newton Gravity Putters

The Company also offers a line of putters under the Newton Gravity brand.

Key Factors Affecting Our Performance

Seasonality and General Trends in Golf Participation

Golf equipment sales are generally seasonal, with demand typically increasing during the spring and summer months when golf activity is highest in many regions. As a result, the Company historically experiences stronger sales during the second and third quarters when weather conditions are more favorable for outdoor play. Conversely, sales may be lower during the first and fourth quarters when cold weather in certain regions reduces outdoor golf activity.

Future participation trends and consumer demand remain subject to economic conditions and other factors beyond the Company’s control.

Manufacturing Transition Activities

During the three and six months ended June 30, 2026, the Company implemented updates to certain existing shaft recipes and related production processes, including recalibration of machining operations, modifications to finishing workflows, changes to paint mixtures, and maintenance activities intended to improve product quality, production consistency, and manufacturing scalability. These activities were undertaken in conjunction with the introduction of updated versions of the Company’s Fast Motion driver shaft and Motion driver and fairway shafts. During the same period, the Company also experienced temporary constraints in the availability of carbon fiber, which further limited manufacturing capacity. Collectively, these factors temporarily reduced production throughput and delayed the fulfillment of certain customer orders.

In accordance with the Company’s accounting policies, approximately $704,000 of idle manufacturing costs during the six months ended June 30, 2026 were recognized as period costs and classified within research and development and general and administrative expenses rather than capitalized into inventory or included in cost of sales. Accordingly, these costs increased operating expenses rather than cost of sales.

In response to these manufacturing and supply constraints, the Company intentionally moderated its marketing activities to align customer demand with available production capacity, reduce its order backlog, and avoid generating demand beyond its ability to fulfill customer orders on a timely basis. Subsequent to quarter end, the Company secured additional carbon fiber supply from Toray Japan, while supply availability from Toray U.S. improved. Beginning in late July 2026, as manufacturing capacity and raw material availability improved, the Company began selectively resuming marketing initiatives. Initial results from these activities have been encouraging; however, overall marketing activity remains below historical levels as the Company transitions to a new marketing agency and has not yet fully ramped paid media expenditures. The Company intends to increase marketing activity in a measured manner as production capacity and material availability support higher demand and timely order fulfillment.

Public Company Costs

Since listing our common stock on The Nasdaq Capital Market in August 2023, we have incurred additional expenses associated with operating as a public company. These costs include compliance with SEC reporting requirements, internal control compliance, director and officer liability insurance, board compensation, and increased accounting, legal, and audit fees.

These costs are expected to continue as long as the Company remains a publicly traded company.

Impact of Inflation

Inflation has resulted in moderate increases in the cost of certain raw materials and component parts used in the manufacture of our products. If inflationary pressures persist, our manufacturing costs may increase and could adversely affect gross margins unless we are able to offset these increases through pricing adjustments, cost reductions, or operational efficiencies.

During the three and six months ended June 30, 2026, the Company did not implement any pricing changes in response to inflationary pressures.

Results of Operations

Three Months Ended June 30, 2026 as Compared to the Three Months Ended June 30, 2025

The following is a comparison of our results of operations for the three months ended June 30, 2026 and 2025 (amounts rounded to the nearest thousand):

Three Months Ended June 30, 2026 Three Months Ended June 30, 2025 Change
Net Sales $1,316,000 $2,068,000 $(752,000)
Cost of goods sold 405,000 669,000 (264,000)
Gross profit 911,000 1,399,000 (488,000)
Operating expenses:
Selling, general and administrative 2,103,000 2,763,000 (660,000)
Research and development 348,000 143,000 205,000
Total operating expenses 2,451,000 2,906,000 (455,000)
Loss from operations (1,540,000) (1,507,000) (33,000)
Interest (expense) income, net (43,000) 29,000 (72,000)
Amortization of debt discount (35,000) - (35,000)
Loss on disposal of asset (16,000) - (16,000)
Change in fair value of warrant liabilities (644,000) (42,000) (602,000)
Net Loss $(2,278,000) $(1,520,000) $(758,000)

3

Net Sales

Our net sales decreased $0.8 million, or 36%, to $1.3 million during the three months ended June 30, 2026, compared to $2.1 million during the three months ended June 30, 2025. The decrease was driven primarily by reduced manufacturing capacity at the Company’s shaft production facility as the Company continued implementing updates to certain existing shaft recipes and related production processes in connection with the introduction of updated versions of its Fast Motion driver shaft and Motion driver and fairway shafts, including recalibration of machining operations, modifications to finishing workflows, changes to paint mixtures, and maintenance activities intended to improve product quality, production consistency, and manufacturing scalability. In addition, temporary constraints in the availability of carbon fiber further limited production capacity during the quarter. Collectively, these factors reduced production throughput and delayed the shipment of certain customer orders.

During the quarter, the Company also moderated marketing expenditures to align customer demand with available manufacturing capacity. Subsequent to quarter end, manufacturing capacity improved following the completion of certain manufacturing transition activities and improved carbon fiber availability.

Cost of goods sold

Cost of goods sold consists primarily of materials, labor, components, and changes in inventory reserves for slow-moving or potentially obsolete products.

Cost of goods sold decreased approximately $0.3 million, or 39%, to approximately $0.4 million for the three months ended June 30, 2026, compared to approximately $0.7 million for the three months ended June 30, 2025. The decrease was primarily attributable to lower sales volumes resulting from reduced production throughput during the Company’s manufacturing transition and temporary carbon fiber supply constraints.

Gross margin increased to 69.2% for the three months ended June 30, 2026, compared to 67.6% for the three months ended June 30, 2025. The increase was primarily attributable to a more favorable product and sales channel mix, including a higher proportion of direct-to-consumer sales, partially offset by manufacturing inefficiencies associated with the Company’s ongoing manufacturing transition.

Operating expenses

Operating expenses include selling, general and administrative expenses, and research and development costs.

Selling, General and Administrative Expenses

Selling, general and administrative expenses consist primarily of employee compensation and benefits, legal and professional fees, sales and marketing expenses, stock-based compensation, public company compliance costs, shipping costs, Shopify transaction fees, rent, depreciation, and other general operating expenses.

Selling, general and administrative expenses decreased approximately $0.7 million to $2.1 million for the three months ended June 30, 2026, compared to $2.8 million for the three months ended June 30, 2025. The decrease was primarily attributable to $1.0 million of lower sales and marketing costs, partially offset by an increase of $0.3 million of manufacturing costs classified as operating expenses due to reduced production throughput and resulting idle capacity, and approximately $0.1 million of increased stock-based compensation expense.

Research and Development Expenses

Research and development costs include employee costs, consultants, licensing fees, and product design and development costs.

Research and development expenses increased $205,000, or 143%, to $348,000 for the three months ended June 30, 2026, compared to $143,000 for the three months ended June 30, 2025. The increase was primarily attributable to approximately $0.1 million of overtime and travel costs associated with the Company’s manufacturing transition, together with approximately $0.1 million of manufacturing labor reclassified to research and development to reflect work performed on product and manufacturing process improvements.

Loss from operations

Loss from operations increased approximately $0.03 million to $1.54 million for the three months ended June 30, 2026, compared to $1.51 million for the three months ended June 30, 2025. The increase was primarily attributable to lower net sales resulting from reduced manufacturing throughput associated with the Company’s manufacturing transition and temporary carbon fiber supply constraints, together with increased operating expenses related to idle manufacturing capacity and higher research and development costs associated with manufacturing process improvements, offset by lower sales and marketing expenses and an improvement in gross margin driven by a more favorable product and sales channel mix.

As discussed above, the Company intentionally moderated its marketing activities to align customer demand with available manufacturing capacity while completing its manufacturing transition and securing additional raw material supply. Subsequent to quarter end, the Company secured additional carbon fiber supply, substantially completed its manufacturing transition activities, improved manufacturing capacity and production throughput, and resumed marketing initiatives under its revised commercial strategy. As a result, the Company believes it is better positioned to reduce customer order backlog, improve order fulfillment, and support future revenue growth.

Interest income (expense), net

Interest expense, net was $43,000 for the three months ended June 30, 2026, compared to interest income, net of $29,000 for the three months ended June 30, 2025. The change was primarily due to lower interest income on cash balances and interest expense incurred on Convertible Notes issued during the first half of 2026.

Amortization of debt discount

Amortization of debt discount was $35,000 for the three months ended June 30, 2026, compared to $0 for the three months ended June 30, 2025, reflecting the amortization of debt discounts related to Convertible Notes issued during the first half of 2026.

Change in Fair Value of Warrant Liability

The Company recognized a non-cash loss of approximately $0.6 million from the change in the fair value of its warrant liabilities. The net loss consisted primarily of an approximately $0.9 million loss resulting from an increase in the fair value of the Series A Warrant liability, partially offset by an approximately $0.2 million gain resulting from a decrease in the fair value of the Series B Warrant liability.

Net loss

Net loss increased approximately $0.8 million to $2.3 million for the three months ended June 30, 2026, compared to $1.5 million for the three months ended June 30, 2025. The increase was primarily attributable to the change in the fair value of warrant liabilities of $0.6 million plus a higher operating loss.

Six Months Ended June 30, 2026 as Compared to the Six Months Ended June 30, 2025

The following is a comparison of our results of operations for the six months ended June 30, 2026 and 2025 (amounts are rounded to the nearest thousand):

Six Months Ended June 30, 2026 Six Months Ended June 30, 2025 Change
Net Sales $2,307,000 $3,278,000 $(971,000)
Cost of goods sold 768,000 1,027,000 (259,000)
Gross profit 1,539,000 2,251,000 (712,000)
Operating expenses:
Selling, general and administrative 4,998,000 5,304,000 (306,000)
Research and development 696,000 425,000 271,000
Total operating expenses 5,694,000 5,729,000 (35,000)
Loss from operations (4,155,000) (3,478,000) (677,000)
Interest (expense) income, net (45,000) 74,000 (119,000)
Amortization of debt discount (37,000) - (37,000)
Loss on disposal of asset (16,000) - (16,000)
Change in fair value of warrant liabilities (684,000) 1,359,000 (2,043,000)
Net Loss $(4,937,000) $(2,045,000) $(2,892,000)

Net Sales

Net sales decreased approximately $1.0 million, or 30%, to approximately $2.3 million for the six months ended June 30, 2026, compared to $3.2 million for the six months ended June 30, 2025. The decrease was driven primarily by reduced manufacturing capacity at the Company’s shaft production facility as the Company implemented updates to certain existing shaft recipes and related production processes in connection with the introduction of updated versions of its Fast Motion driver shaft and Motion driver and fairway shafts, including recalibration of machining operations, modifications to finishing workflows, changes to paint mixtures, maintenance activities intended to improve product quality, production consistency, and manufacturing scalability, and temporary constraints in the availability of carbon fiber. Collectively, these factors reduced production throughput, delayed the shipment of certain customer orders, and resulted in lower sales during the period.

During the period, the Company also moderated marketing expenditures to align customer demand with available manufacturing capacity. Subsequent to quarter end, manufacturing capacity improved following the completion of certain manufacturing transition activities and the Company’s securing of additional carbon fiber supply. Beginning in late July 2026, the Company began selectively resuming marketing initiatives as production capacity and material availability improved.

Cost of goods sold

Cost of goods sold consists primarily of materials, labor, components, and changes in inventory reserves for slow-moving or potentially obsolete products.

Cost of goods sold decreased approximately $0.3 million, or 25%, to approximately $0.8 million for the six months ended June 30, 2026, compared to approximately $1.0 million for the six months ended June 30, 2025. The decrease was primarily attributable to lower sales volumes resulting from reduced production throughput during the Company’s manufacturing transition and temporary carbon fiber supply constraints.

Gross margin was 67% for the six months ended June 30, 2026, compared to 69% for the six months ended June 30, 2025. The decrease was primarily attributable to manufacturing inefficiencies associated with reduced production throughput and idle manufacturing capacity during the Company’s manufacturing transition, partially offset by a more favorable product and sales channel mix, including a higher proportion of direct-to-consumer sales.

Operating expenses

Operating expenses include selling, general and administrative expenses, and research and development costs.

Selling, General and Administrative Expenses

Selling, general and administrative expenses consist primarily of employee compensation and benefits, legal and professional fees, sales and marketing expenses, stock-based compensation, public company compliance costs, shipping costs, Shopify transaction fees, rent, depreciation, and other general operating expenses.

Selling, general and administrative expenses decreased $0.3 million, or 6%, to $5.0 million for the six months ended June 30, 2026, compared to approximately $5.3 million for the six months ended June 30, 2025. The decrease was primarily attributable to a reduction of approximately $1.0 million in sales and marketing expenses, partially offset by approximately $0.5 million of idle manufacturing costs classified as operating expenses due to reduced production throughput and resulting idle capacity, approximately $0.2 million of increased stock-based compensation expense, and a $0.1 million increase in professional services.

Research and Development Expenses

Research and development costs include employee costs, consultants, licensing fees, and product design and development costs.

Research and development expenses increased $0.3 million, or 64%, to $0.7 million for the six months ended June 30, 2026, compared to $0.4 million for the six months ended June 30, 2025. The increase was primarily attributable to $0.2 million of manufacturing labor reclassified to research and development to reflect work performed on product and manufacturing process improvements.

Loss from operations

Loss from operations increased approximately $0.7 million to $4.2 million for the six months ended June 30, 2026, compared to $3.5 million for the six months ended June 30, 2025.

The increase was primarily attributable to lower net sales resulting from reduced manufacturing throughput associated with the Company’s manufacturing transition and temporary carbon fiber supply constraints, together with increased operating expenses related to idle manufacturing capacity, higher stock-based compensation costs, and increased research and development activities associated with manufacturing process improvements. These factors were partially offset by lower sales and marketing expenses resulting from the Company’s decision to moderate marketing activities while aligning customer demand with available manufacturing capacity.

Interest income (expense), net

Interest expense, net was $45,000 for the six months ended June 30, 2026, compared to interest income, net of $74,000 for the six months ended June 30, 2025. The change was primarily due to lower interest income on cash balances and interest expense incurred on Convertible Notes issued during the first half of 2026.

Amortization of debt discount

Amortization of debt discount was $37,000 for the six months ended June 30, 2026, compared to $0 for the six months ended June 30, 2025, reflecting the amortization of debt discounts related to Convertible Notes issued during the first half of 2026.

Change in Fair Value of Warrant Liability

The Company recognized a non-cash loss of approximately $0.7 million from the change in the fair value of its warrant liabilities for the six months ended June 30, 2026, compared with a non-cash gain of approximately $1.4 million for the six months ended June 30, 2025. The current-period loss primarily consisted of an approximately $0.9 million loss resulting from an increase in the fair value of the Series A Warrant liability, partially offset by an approximately $0.2 million gain resulting from a decrease in the fair value of the Series B Warrant liability. The prior-year period gain consisted of a $1.4 million decrease in the fair value of the Series A Warrants, partially offset by a $0.1 million increase in the fair value of the Series B Warrants.

Net loss

Net loss increased by $2.9 million to $4.9 million for the six months ended June 30, 2026, compared to a $2.0 million net loss for the six months ended June 30, 2025.

The increase was primarily attributable to an unfavorable year-over-year change of approximately $2.0 million in the non-cash fair value of warrant liabilities, reflecting a current-period loss compared with a gain in the prior-year period, as well as a higher loss from operations.

Manufacturing transition activities and temporary carbon fiber supply constraints reduced production throughput during the period, resulting in lower net sales and higher operating costs associated with idle manufacturing capacity.

Liquidity and Capital Resources

The Company’s primary sources of liquidity include existing cash resources and access to external financing. The Company’s primary uses of cash include operating expenses, inventory purchases, manufacturing investments, and marketing initiatives to support growth.

On October 24, 2025, the Company entered into an At-The-Market Sales Offering Agreement (the “ATM Offering Agreement”) with Kingswood Capital Partners, LLC (“Kingswood”), which allows the Company to sell up to $10.0 million of its common stock from time to time pursuant to its effective shelf registration statement on Form S-3. The ATM program provides the Company with a source of potential liquidity, and the Company intends to utilize the program opportunistically, subject to market conditions, trading volume, and capital requirements. As of June 30, 2026, the Company had not sold any shares under the ATM program.

On March 16, 2026, the Company entered into the Purchase Agreement providing for the issuance, in one or more closings, of Convertible Notes with an aggregate principal amount of up to $2.0 million, together with Warrants to purchase shares of the Company’s common stock at an exercise price of $1.75 per share, subject to adjustment. On May 28, 2026, the Company’s Board of Directors approved an amendment increasing the maximum aggregate principal amount available under the Purchase Agreement to $3.0 million.

During the six months ended June 30, 2026, the Company issued an aggregate principal amount of $2.25 million of Convertible Notes pursuant to the Purchase Agreement. The Convertible Notes bear interest at 10% per annum, mature 18 months from issuance, and are convertible, together with accrued interest, into shares of the Company’s common stock at a conversion price of $1.60 per share at maturity. In connection with these issuances, the Company also issued five-year Warrants to purchase an aggregate of 225,000 shares of common stock at an exercise price of $1.75 per share. Net proceeds from these financings were used for working capital and general corporate purposes (see Notes 8 and 9).

Subsequent to June 30, 2026, the Company entered into a $5.0 million senior secured revolving credit facility, which matures on July 1, 2028 and bears interest at Daily Simple SOFR plus 13%, and completed the exchange of approximately $2.3 million of outstanding Convertible Notes, including accrued interest, for Series A Convertible Preferred Stock. These transactions increased available liquidity, reduced outstanding indebtedness, and increased stockholders’ equity. On August 14, 2026, the Company also completed a private placement financing at a purchase price of $1.33 per share for aggregate gross proceeds of approximately $1.0 million and net proceeds of approximately $880,000.

The Company expects that additional capital will be required to fund operations and execute its growth strategy. Management intends to evaluate financing alternatives, including the ATM program and other potential equity financings, to meet its capital requirements while seeking to manage dilution to existing stockholders. As of August 13, 2026 the Company had drawn $750,000 under the revolving credit facility. The private placement financing completed on August 14, 2026 provided approximately $880,000 of additional net proceeds.

The Company’s future capital requirements will depend on numerous factors, including the pace of revenue growth, if any, manufacturing utilization, inventory requirements, and the level of investment in marketing and operational initiatives. Management may also adjust the timing and level of certain discretionary expenditures based on operating performance and available liquidity.

The Company is also evaluating additional actions to strengthen its balance sheet and stockholders’ equity in connection with maintaining compliance with applicable Nasdaq continued listing requirements.

The following table summarizes our cash flows for the periods indicated (amounts are rounded to the nearest thousand):

Net cash provided by (used in): Six Months Ended June 30, 2026 2025
Operating activities $(2,815,000) $(2,777,000)
Investing activities (169,000) (291,000)
Financing activities 2,128,000 (577,000)
Net decrease in cash $(856,000) $(3,645,000)

Operating Activities

Net cash used in operating activities for the six months ended June 30, 2026 was $2.8 million, compared to $2.8 million for the six months ended June 30, 2025. Operating cash outflows during the period included employee-related costs associated with personnel expansion and investments in operational systems intended to support scalability. Operating cash flows were also affected by reduced manufacturing capacity associated with the Company’s manufacturing transition and temporary carbon fiber supply constraints. Cash used in operating activities was partially offset by an approximately $0.8 million increase in accounts payable and accrued liabilities, reflecting the timing of payments to vendors and the accrual of operating expenses.

Investing Activities

Net cash used in investing activities for the six months ended June 30, 2026 totaled $0.2 million, primarily related to purchases of property and equipment supporting the Company’s manufacturing operations.

Net cash used in investing activities for the six months ended June 30, 2025 totaled $0.3 million, also related primarily to purchases of property and equipment.

Financing Activities

Net cash provided by financing activities for the six months ended June 30, 2026 was $2.1 million, compared to net cash used in financing activities of $0.6 million for the six months ended June 30, 2025.

Financing activities during the six months ended June 30, 2026 primarily reflected approximately $2.2 million of net proceeds from the issuance of Convertible Notes.

Management believes that the revolving credit facility entered into subsequent to quarter end, the Convertible Note exchange and the Company’s existing ATM program, provide additional financial flexibility while the Company continues to pursue revenue growth and evaluate additional capital raising opportunities.

Nasdaq Continued Listing Requirements

On April 6, 2026, the Company received a notice from the Listing Qualifications Department of The Nasdaq Stock Market LLC (“Nasdaq”) indicating that the Company was not in compliance with Nasdaq Listing Rule 5550(b)(1), which requires listed companies to maintain a minimum of $2.5 million in stockholders’ equity.

The notice had no immediate effect on the listing of the Company’s common stock on Nasdaq.

The Company submitted a plan to regain compliance prior to the May 21, 2026 deadline. As of the date of this filing, the Company has not received a response from Nasdaq regarding its compliance plan. If Nasdaq accepts the plan, it may grant the Company up to 180 calendar days from the date of the notice to regain compliance with the continued listing requirement.

Since submitting its compliance plan, the Company has completed several initiatives intended to strengthen its balance sheet, including entering into a $5.0 million senior secured revolving credit facility and exchanging approximately $2.3 million of outstanding Convertible Notes, including accrued interest, for Series A Convertible Preferred Stock. These transactions increased available liquidity, reduced outstanding indebtedness, and increased stockholders’ equity. The Company continues to evaluate additional actions to strengthen its balance sheet and regain compliance while seeking to minimize dilution to existing stockholders.

There can be no assurance that Nasdaq will accept the Company’s compliance plan or that the Company will regain compliance within any extension period that may be granted. Although management believes the actions taken subsequent to quarter end improve the Company’s ability to address the Nasdaq continued listing requirements, additional financing will be required to support ongoing operations, as discussed below under “Going Concern.”

Going Concern

The accompanying condensed financial statements have been prepared on a going concern basis, which contemplates the realization of assets and the settlement of liabilities and commitments in the normal course of business. As reflected in the accompanying condensed financial statements, for the six months ended June 30, 2026, the Company incurred a net loss of $4.9 million, used $2.8 million of cash in operating activities, and had a stockholders’ deficiency of $3.5 million. These factors raise substantial doubt about the Company’s ability to continue as a going concern within one year after the date these condensed financial statements are issued. In addition, the Company’s independent registered public accounting firm included an explanatory paragraph in its report on the Company’s financial statements for the year ended December 31, 2025, expressing substantial doubt about the Company’s ability to continue as a going concern.

At June 30, 2026, the Company had approximately $0.4 million of cash and cash equivalents. The Company also has an existing ATM program, which provides an additional potential source of liquidity, although the amount of capital that may be raised under the program will depend on market conditions, trading volume, and investor demand. Management currently expects that its existing cash resources, together with recent financing activities, the ATM program, if utilized, and other potential financing alternatives, will provide additional sources of liquidity; however, management expects that additional financing will be required to support ongoing operations.

Subsequent to June 30, 2026, the Company entered into a $5.0 million senior secured revolving credit facility, which matures on July 1, 2028 and bears interest at Daily Simple SOFR plus 13%. In addition, holders of approximately $2.3 million of outstanding Convertible Notes, including accrued interest, exchanged such indebtedness for Series A Convertible Preferred Stock, reducing outstanding indebtedness and increasing stockholders’ equity. On August 14, 2026, the Company also completed a private placement financing at a purchase price of $1.33 per share for aggregate gross proceeds of approximately $1.0 million and net proceeds of approximately $880,000.

The Company’s ability to continue as a going concern remains dependent upon its ability to obtain additional debt or equity financing and achieve improved operating performance. While management believes the actions taken subsequent to June 30, 2026, including establishing the revolving credit facility, the exchange of Convertible Notes for preferred equity, the completion of the private placement financing, and the continued availability of the Company’s ATM program, have improved the Company’s liquidity and capital structure, there can be no assurance that additional financing will be available on acceptable terms, or at all. Any additional financing may contain restrictive covenants, require the issuance of additional equity securities, or otherwise result in dilution to existing stockholders. Accordingly, substantial doubt remains about the Company’s ability to continue as a going concern.

Inflation and Supply Chain

The Company’s manufacturing operations utilize raw materials such as carbon fiber, metals, coatings, and other specialized components. Inflationary pressures have continued to affect the cost of certain raw materials, freight, and labor; however, the Company has sought to mitigate these impacts through supplier diversification, operational efficiencies, and product pricing strategies.

During the six months ended June 30, 2026, the Company experienced temporary constraints in the availability of carbon fiber, which, together with ongoing manufacturing process improvements, reduced production throughput and delayed the shipment of certain customer orders. Subsequent to quarter end, the Company secured additional carbon fiber supply and believes these constraints have been substantially alleviated.

Because the Company manufactures a significant portion of its shaft products domestically at its facility in St. Joseph, Missouri, management believes the Company benefits from greater operational control and reduced exposure to certain international supply chain disruptions and tariffs compared to companies that rely more heavily on overseas manufacturing.

At present, inflation has not had a material adverse effect on the Company’s financial condition or results of operations. However, sustained increases in raw material, freight, or labor costs, or future disruptions in the availability of key manufacturing inputs, could adversely affect the Company’s cost structure, production capacity, and operating margins in future periods.

Off-Balance Sheet Arrangements

At June 30, 2026 and December 31, 2025, the Company did not have any transactions, obligations or relationships that could be considered off-balance sheet arrangements.

Critical Accounting Policies and Estimates

Our discussion and analysis of our results of operations, financial condition, and liquidity are based upon our financial statements, which have been prepared and audited in accordance with U.S. generally accepted accounting principles (“GAAP”). The preparation of these condensed financial statements requires management to make estimates and judgments that affect the reported amounts of assets, liabilities, stockholders’ equity (deficiency), revenues, and expenses, as well as the related disclosures of contingent assets and liabilities.

Management bases its estimates on historical experience and on various other assumptions that management believes to be reasonable under the circumstances. These estimates form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Because the use of estimates is inherent in the financial reporting process, actual results could differ materially from those estimates.

Management evaluates its estimates on an ongoing basis and adjusts those estimates when facts and circumstances change. Management believes the following accounting policies involve the most significant judgments and estimates used in the preparation of the Company’s financial statements.

Revenue Recognition

We account for revenue recognition in accordance with Accounting Standards Codification (“ASC”) Topic 606, “Revenue from Contracts with Customers.”

The amount of revenue we recognize is based on the amount of consideration we expect to receive from customers. The amount of consideration is the sales price adjusted for estimates of variable consideration, including sales returns, discounts and allowances as well as sales programs, sales promotions and price concessions that we offer, as described further below. These estimates are based on amounts earned or expected to be claimed by customers on the related sales, and are therefore recorded to the respective net revenue, trade accounts receivable, and sales program liability accounts.

We may offer short-term sales incentives, which include sell-through promotions and price concessions or price reductions. Sell-through promotions are generally offered throughout a product’s life cycle, which varies from two to three years but could be shorter or longer. Price concessions or price reductions are generally offered at the end of the product’s life cycle. The estimated variable consideration related to these potential programs will be based on a rate that includes historical and forecasted data. We may record a reduction to net revenues using this rate at the time of the sale. We will monitor this rate against actual results and forecasted estimates and adjusts the rate as necessary in order to reflect the amount of consideration we expect to receive from our customers.

We also may record an estimate for anticipated returns as a reduction of sales and cost of sales, and accounts receivable in the period that the related sales are recorded. The cost recovery of inventory associated with this reserve will be accounted for in other current assets. Sales returns will be estimated based upon historical returns, current economic trends, changes in customer demands and sell-through of products. We also may offer certain customers sales programs that would allow for specific returns. We may record a return reserve for anticipated returns related to these sales programs at the time of the sale based on the terms of the sales program.

Stock-Based Compensation

The Company periodically grants restricted stock units (“RSUs”) and stock options to employees, directors, and consultants as compensation for services. The Company accounts for these awards in accordance with ASC 718, Compensation—Stock Compensation, whereby the fair value of the award is measured on the grant date and recognized as compensation expense on a straight-line basis over the vesting period. Stock-based compensation expense is recorded within the Company’s condensed statements of operations based on the nature of the services rendered. The fair value of RSUs is determined based on the fair market value of the Company’s common stock on the grant date. RSUs generally vest based on continued service over a specified vesting period. Compensation expense for time-based RSU awards is recognized on a straight-line basis over the requisite service period. The Company may grant RSU awards in the future that include performance-based vesting conditions tied to operational or financial milestones. For such awards, compensation expense would be recognized when it becomes probable that the performance condition will be achieved. The Company recognizes forfeitures as they occur.

The fair value of stock option awards is estimated on the grant date using the Black-Scholes option-pricing model, which requires management to make assumptions regarding the expected term of the award, expected volatility of the Company’s common stock, risk-free interest rate, and expected dividend yield.

The expected term of stock options granted to employees is determined using the “simplified method” for awards that qualify as plain-vanilla options. The expected term of stock options granted to non-employees is generally based on the contractual term of the award. The risk-free interest rate is determined by reference to the U.S. Treasury yield curve in effect at the time of grant for time periods approximately equal to the expected term of the award. The expected dividend yield is zero, based on the fact that the Company has never paid dividends and does not currently expect to pay dividends in the foreseeable future.

Warrant Accounting

The Company accounts for common stock warrants as either equity-classified or liability-classified instruments based on an evaluation of the specific terms of the warrants and the applicable guidance in ASC 480, Distinguishing Liabilities from Equity, and ASC 815, Derivatives and Hedging.

This evaluation includes determining whether the warrants are freestanding financial instruments, whether they meet the definition of a liability under ASC 480, and whether they satisfy the criteria for equity classification under ASC 815. In particular, the Company assesses whether the warrants are indexed to the Company’s own stock and whether the terms of the warrants could require net cash settlement in circumstances outside the Company’s control, among other conditions required for equity classification.

This assessment requires the use of professional judgment and is performed at the time of warrant issuance and reassessed at each reporting period while the warrants remain outstanding.

Warrants that are classified as liabilities are recorded at fair value upon issuance and remeasured at fair value at each reporting date, with changes in fair value recognized in the Company’s condensed statements of operations. Warrants that qualify for equity classification are recorded within additional paid-in capital and are not subsequently remeasured.

Recently Issued Accounting Pronouncements

See Note 2 of the Notes to Condensed Financial Statements for a discussion of recent accounting pronouncements.

Controls and procedures

As filed, 2,273 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

Evaluation of Disclosure Controls and Procedures

Our Chief Executive Officer and Principal Financial Officer evaluated the effectiveness of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934) as of June 30, 2026.

Based on that evaluation, our Chief Executive Officer and Principal Financial Officer concluded that our disclosure controls and procedures were not effective as of June 30, 2026 to provide reasonable assurance that information required to be disclosed in reports that we file or submit under the Exchange Act is recorded, processed, summarized, and reported within the time periods specified in SEC rules and forms and accumulated and communicated to management, including our Chief Executive Officer and Chief Financial Officer, as appropriate, to allow timely decisions regarding required disclosures.

This conclusion is consistent with management’s assessment as of December 31, 2025.

Changes in Internal Control over Financial Reporting

There were no changes in the Company’s internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) during the three months ended June 30, 2026 that have materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting.

Management continues to monitor the effectiveness of its internal controls and may implement additional enhancements as the Company’s operations continue to grow.

Inherent Limitations on Effectiveness of Controls

Our disclosure controls and procedures are designed to provide reasonable assurance of achieving their objectives. However, management does not expect that our disclosure controls and procedures will prevent or detect all errors or fraud.

Because of inherent limitations, any system of controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving the desired control objectives.

In addition, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with policies or procedures may deteriorate.

Risk factors

As filed, 485 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.

There have been no material changes from our risk factors as previously reported in Part I, Item 1A of our Annual Report on Form 10-K for the year ended December 31, 2025. Additional risks and uncertainties not presently known to us or that we currently deem immaterial may also harm our business. All forward-looking statements in this document are based on information available to us as of the date hereof, and we assume no obligations to update any such forward-looking statements.

Figures reported in this filing

Standardized line items from the XBRL in this filing, for the period ended 2026-06-30. Comparative periods it repeats are left out.

Figures reported in this filing
Line itemPeriodValueXBRL concept
Revenue3 months2026-04-01 to 2026-06-30$1.3mus-gaap:RevenueFromContractWithCustomerExcludingAssessedTax
Revenue6 months2026-01-01 to 2026-06-30$2.3mus-gaap:RevenueFromContractWithCustomerExcludingAssessedTax
Cost of revenue3 months2026-04-01 to 2026-06-30$405.0kus-gaap:CostOfGoodsAndServicesSold
Cost of revenue6 months2026-01-01 to 2026-06-30$768.0kus-gaap:CostOfGoodsAndServicesSold
Gross profit3 months2026-04-01 to 2026-06-30$911.0kus-gaap:GrossProfit
Gross profit6 months2026-01-01 to 2026-06-30$1.5mus-gaap:GrossProfit
Research and development3 months2026-04-01 to 2026-06-30$348.0kus-gaap:ResearchAndDevelopmentExpense
Research and development6 months2026-01-01 to 2026-06-30$696.0kus-gaap:ResearchAndDevelopmentExpense
Selling, general and administrative3 months2026-04-01 to 2026-06-30$2.1mus-gaap:SellingGeneralAndAdministrativeExpense
Selling, general and administrative6 months2026-01-01 to 2026-06-30$5.0mus-gaap:SellingGeneralAndAdministrativeExpense
Operating income3 months2026-04-01 to 2026-06-30−$1.5mus-gaap:OperatingIncomeLoss
Operating income6 months2026-01-01 to 2026-06-30−$4.2mus-gaap:OperatingIncomeLoss
Net income3 months2026-04-01 to 2026-06-30−$2.3mus-gaap:NetIncomeLoss
Net income6 months2026-01-01 to 2026-06-30−$4.9mus-gaap:NetIncomeLoss
Diluted EPS3 months2026-04-01 to 2026-06-30−$0.49us-gaap:EarningsPerShareDiluted
Diluted EPS6 months2026-01-01 to 2026-06-30−$1.07us-gaap:EarningsPerShareDiluted
Basic EPS3 months2026-04-01 to 2026-06-30−$0.49us-gaap:EarningsPerShareBasic
Basic EPS6 months2026-01-01 to 2026-06-30−$1.07us-gaap:EarningsPerShareBasic
Diluted shares (weighted)3 months2026-04-01 to 2026-06-304,606,137 sharesus-gaap:WeightedAverageNumberOfDilutedSharesOutstanding
Diluted shares (weighted)6 months2026-01-01 to 2026-06-304,599,535 sharesus-gaap:WeightedAverageNumberOfDilutedSharesOutstanding
Operating cash flow6 months2026-01-01 to 2026-06-30−$2.8mus-gaap:NetCashProvidedByUsedInOperatingActivities
Capital expenditure6 months2026-01-01 to 2026-06-30$169.0kus-gaap:PaymentsToAcquirePropertyPlantAndEquipment
Cash and equivalentsAt period end2026-06-30$442.0kus-gaap:CashAndCashEquivalentsAtCarryingValue
Current assetsAt period end2026-06-30$1.4mus-gaap:AssetsCurrent
Total assetsAt period end2026-06-30$2.5mus-gaap:Assets
Current liabilitiesAt period end2026-06-30$4.0mus-gaap:LiabilitiesCurrent
Total liabilitiesAt period end2026-06-30$6.0mus-gaap:Liabilities
Shareholders' equityAt period end2026-06-30−$3.5mus-gaap:StockholdersEquity

Source: SEC EDGAR, the filing index for accession 0001493152-26-038399. Last ingested by Listed: Nov 14, 2026, 21:23 ET. Listed shows no prices and gives no investment advice.