NLI Holdings, Inc.: Form 10-K for the period ended Dec 31, 2024

The Company

NL Industries, Inc. was organized as a New Jersey corporation in 1891. Our common stock trades on the New York Stock Exchange, or the NYSE, under the symbol NL. References to “NL Industries,” “NL,” the “Company,” the “Registrant,” “we,” “our,” “us” and similar terms mean NL Industries, Inc. and its subsidiaries and affiliate, unless the context otherwise requires.

Our principal executive offices are located at Three Lincoln Center, 5430 LBJ Freeway, Suite 1700, Dallas, TX 75240. Our telephone number is (972) 233-1700. We maintain a website at www.nl-ind.com (http://www.nl-ind.com).

Business summary

We are primarily a holding company. We operate in the component products industry through our majority-owned subsidiary, CompX International Inc. (NYSE American: CIX). We operate in the chemicals industry through our noncontrolling interest in Kronos Worldwide, Inc. CompX and Kronos (NYSE: KRO) each file periodic reports with the Securities and Exchange Commission (“SEC”).

Organization

At December 31, 2024, Valhi, Inc. (NYSE: VHI) held approximately 83% of our outstanding common stock and a wholly-owned subsidiary of Contran Corporation held approximately 91% of Valhi’s outstanding common stock. As discussed in Note 1 to our Consolidated Financial Statements, Lisa K. Simmons and a trust established for the benefit of Ms. Simmons and her late sister and their children (the “Family Trust”) may be deemed to control Contran, and therefore may be deemed to indirectly control the wholly-owned subsidiary of Contran, Valhi and us.

Forward-looking statements

This Annual Report on Form 10-K contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995, as amended. Statements in this Annual Report that are not historical facts are forward-looking in nature and represent management’s beliefs and assumptions based on currently available information. In some cases, you can identify forward-looking statements by the use of words such as “believes,” “intends,” “may,” “should,” “could,” “anticipates,” “expects” or comparable terminology, or by discussions of strategies or trends. Although we believe the expectations reflected in such forward-looking statements are reasonable, we do not know if these expectations will be correct. Such statements by their nature involve substantial risks and uncertainties that could significantly impact expected results. Actual future results could differ materially from those predicted. The factors that could cause actual future results to differ materially from those described herein are the risks and uncertainties discussed in this Annual Report and those described from time to time in our other filings with the SEC and include, but are not limited to, the following:

• Future supply and demand for our products;
• Kronos’ ability to realize expected cost savings from strategic and operational initiatives;
• Kronos’ ability to integrate acquisitions, including Louisiana Pigment Company, L.P., into its operations and realize expected synergies and innovations;
• The extent of the dependence of certain of our businesses on certain market sectors;
• The cyclicality of our businesses (such as Kronos’ TiO2 operations);
• Customer and producer inventory levels;
• Unexpected or earlier-than-expected industry capacity expansion (such as the TiO2 industry);
• Changes in raw material and other operating costs (such as energy, ore, zinc, aluminum, steel and brass costs) or the implementation of tariffs on imported raw materials and our ability to pass those costs on to our customers or offset them with reductions in other operating costs;
• Changes in the availability of raw material (such as ore);
• General global economic and political conditions that harm the worldwide economy, disrupt our supply chain, increase material and energy costs or reduce demand or perceived demand for TiO2 and our products or impair our ability to operate our facilities (including changes in the level of gross domestic product in various regions of the world, tariffs, natural disasters, terrorist acts, global conflicts and public health crises);
• Operating interruptions (including, but not limited to, labor disputes, leaks, natural disasters, fires, explosions, unscheduled or unplanned downtime, transportation interruptions, certain regional and world events or economic conditions and public health crises);
• Technology related disruptions (including, but not limited to, cyber-attacks; software implementation, upgrades, or improvements; technology processing failures; or other events) related to our technology infrastructure that could impact our ability to continue operations, or at key vendors which could impact our supply chain, or at key customers which could impact their operations and cause them to curtail or pause orders;
• Competitive products and substitute products;
• Competition from Chinese suppliers with less stringent regulatory and environmental compliance requirements;
• Customer and competitor strategies;
• Potential consolidation of Kronos’ competitors;
• Potential consolidation of Kronos’ customers;
• The impact of pricing and production decisions;
• Competitive technology positions;
• Our ability to protect or defend intellectual property rights;
• Potential difficulties in integrating future acquisitions;
• Potential difficulties in upgrading or implementing accounting and manufacturing software systems;
• The introduction of new, or changes in existing, tariffs, trade barriers or trade disputes (including tariffs imposed by the U.S. federal government on imports from Canada, where Kronos has a manufacturing facility);
• Fluctuations in currency exchange rates (such as changes in the exchange rate between the U.S. dollar and each of the euro, the Norwegian krone and the Canadian dollar and between the euro and the Norwegian krone), or possible disruptions to our business resulting from uncertainties associated with the euro or other currencies;
• Decisions to sell operating assets other than in the ordinary course of business;
• Kronos’ ability to renew or refinance credit facilities or other debt instruments in the future;
• Changes in interest rates;
• Kronos’ ability to comply with covenants contained in its revolving bank credit facility;
• Our ability to maintain sufficient liquidity;
• The timing and amounts of insurance recoveries;
• The ability of our subsidiaries or affiliates to pay us dividends;
• Uncertainties associated with CompX’s development of new products and product features;
• The ultimate outcome of income tax audits, tax settlement initiatives or other tax matters, including future tax reform;
• Our ability to utilize income tax attributes or changes in income tax rates related to such attributes, the benefits of which may or may not have been recognized under the more-likely-than-not recognition criteria;
• Environmental matters (such as those requiring compliance with emission and discharge standards for existing and new facilities or new developments regarding environmental remediation or decommissioning obligations at sites related to our former operations);
• Government laws and regulations and possible changes therein (such as changes in government regulations which might impose various obligations on former manufacturers of lead pigment and lead-based paint, including us, with respect to asserted health concerns associated with the use of such products), including new environmental, sustainability, health and safety or other regulations (such as those seeking to limit or classify TiO2 or its use);
• The ultimate resolution of pending litigation (such as our lead pigment and environmental matters); and
• Pending or possible future litigation (such as litigation related to CompX’s use of certain permitted chemicals in its productions process) or other actions.

Should one or more of these risks materialize (or the consequences of such development worsen), or should the underlying assumptions prove incorrect, actual results could differ materially from those currently forecasted or expected. We disclaim any intention or obligation to update or revise any forward-looking statement whether as a result of changes in information, future events or otherwise.

Operations and equity investment

Information regarding our operations and the companies conducting such operations is set forth below. Geographic financial information is included in Note 2 to our Consolidated Financial Statements, which is incorporated herein by reference.

COMPONENT PRODUCTS – COMPX INTERNATIONAL INC.

Industry overview – Through our majority-owned subsidiary, CompX, we manufacture engineered components utilized in a variety of applications and industries. CompX manufactures mechanical and electrical cabinet locks and other locking mechanisms used in postal, recreational transportation, office and institutional furniture, cabinetry, tool storage and healthcare applications. CompX also manufactures wake enhancement systems, stainless steel exhaust systems, gauges, throttle controls, trim tabs and related hardware and accessories for the recreational marine and other industries.

CompX continuously seeks to diversify into new markets and identify new applications and features for its products, which it believes provide a greater potential for higher rates of earnings growth as well as diversification of risk.

Manufacturing, operations and products – CompX’s Security Products business manufactures mechanical and electrical cabinet locks and other locking mechanisms used in a variety of applications including mailboxes, ignition systems, file cabinets, desk drawers, tool storage cabinets, high security medical cabinetry, integrated inventory and access control secured narcotics boxes, electronic circuit panels, storage compartments, gas station security, vending and cash containment machines. CompX’s Security Products business has one manufacturing facility in Mauldin, South Carolina and one in Grayslake, Illinois which is shared with its Marine Components business. CompX believes it is a North American market leader in the manufacture and sale of cabinet locks and other locking mechanisms. These products include:

• disc tumbler locks which provide moderate security and generally represent the lowest cost lock CompX produces;
• pin tumbler locks which are more costly to produce and are used in applications requiring higher levels of security, including KeSet® and System 64® (which each allow the user to change the keying on a single lock 64 times without removing the lock from its enclosure), TuBar® and Turbine®; and
• CompX’s innovative CompX eLock® and StealthLock® electronic locks which provide stand-alone or networked security and audit trail capability for drug storage and other valuables through the use of a proximity card, magnetic stripe, radio frequency or other keypad credential.

A substantial portion of CompX’s Security Products’ sales consist of products with specialized adaptations to an individual customer’s specifications, some of which are listed above. CompX also has a standardized product line suitable for many customers, which is offered through a North American distribution network to locksmith and smaller original equipment manufacturer (“OEM”) distributors via its STOCK LOCKS® distribution program.

CompX’s Marine Components business manufactures and distributes wake enhancement systems, stainless steel exhaust components, gauges, throttle controls, trim tabs and related hardware and accessories primarily for ski/wakeboard boats (towboats) and performance boats. CompX’s Marine Components business has a facility in Neenah, Wisconsin and a facility in Grayslake, Illinois which is shared with Security Products. CompX’s specialty Marine Component products are high precision components designed to operate within tight tolerances in the highly demanding marine environment. These products include:

• original equipment and aftermarket stainless steel exhaust headers, exhaust pipes, mufflers and other exhaust components;
• high performance gauges such as GPS speedometers and tachometers;
• mechanical and electronic controls and throttles;
• wake enhancement devices, trim tabs, steering wheels and billet aluminum accessories;
• dash panels, LED indicators and wire harnesses; and
• grab handles, pin cleats and other accessories.

The following table sets forth the location, size and business operations for each of CompX’s principal operating facilities at December 31, 2024:

SP – Security Products business

MC – Marine Components business

(1) ISO-9001 registered facilities

CompX believes all of its facilities are well maintained and satisfactory for their intended purposes.

Raw materials – The primary raw materials used in CompX’s manufacturing processes are:

• Security Products – zinc and brass (for the manufacture of locking mechanisms).
• Marine Components – stainless steel (for the manufacture of exhaust headers and pipes and wake enhancement systems), aluminum (for the manufacture of throttles and trim tabs) and other components.

These raw materials are purchased from several suppliers, are readily available from numerous sources and accounted for approximately 13% of our total cost of sales for 2024. Total material costs, including purchased components, represented approximately 46% of our cost of sales in 2024.

CompX occasionally enters into short-term commodity-related raw material supply arrangements to mitigate the impact of future price increases in commodity-related raw materials, including zinc, brass, aluminum and stainless steel. These arrangements generally provide for stated unit prices based upon specified purchase volumes, which help CompX to stabilize its commodity-related raw material costs to a certain extent. At other times, CompX may make spot market buys of larger quantities of raw materials to take advantage of favorable pricing or volume-based discounts. CompX’s raw material prices were generally stable through the first half of 2024, although beginning in the latter half of the third quarter it began to experience moderate increases in certain raw material costs, particularly brass. The zinc market was volatile in 2024, but CompX was successful in making strategic spot buys to keep its costs consistent with 2023. Prices for aluminum and stainless steel, which are the primary raw materials used for the manufacture of CompX’s marine components (including marine exhaust headers and pipes, wake enhancement systems, throttles and trim tabs), were relatively stable in 2024 because it took advantage of volume purchase opportunities during the year. In most cases, commodity raw materials CompX purchases include processing and conversion costs, such as alloying, extrusion and rolling, which remain elevated due to costs of labor, transportation and energy. Processing and conversion costs are not expected to decrease and may negate the benefit of softening commodity prices on CompX’s purchases. Based on current economic conditions, CompX expects the prices for zinc, brass, aluminum, stainless steel and other manufacturing materials in 2025 to be relatively stable, although governmental actions such as tariffs may impact markets. When purchased on the spot market, each of these raw materials may be subject to sudden and unanticipated price increases. When possible, CompX seeks to mitigate the impact of fluctuations in these raw material costs on its margins through improvements in production efficiencies or other operating cost reductions. In the event CompX is unable to offset raw material cost increases with other cost reductions, it may be difficult to recover those cost increases through increased product selling prices or raw material surcharges due to the competitive nature of the markets in which CompX competes. Consequently, overall operating margins can be negatively affected by commodity-related raw material cost pressures. Commodity market prices are cyclical, reflecting overall economic trends, specific developments in consuming industries and speculative investor activities.

Patents and trademarks – CompX holds a number of patents relating to its component products, certain of which it believes to be important to CompX and its continuing business activity. Patents generally have a term of 20 years and CompX’s patents have remaining terms ranging from one year to 16 years at December 31, 2024.

CompX’s major trademarks and brand names in addition to CompX® include:

Sales, marketing and distribution – A majority of CompX’s component sales are direct to large OEM customers through its factory-based sales and marketing professionals supported by engineers working in concert with field salespeople and independent manufacturer’s representatives. CompX selects manufacturer’s representatives based on special skills in certain markets or relationships with current or potential customers.

In addition to sales to large OEM customers, a substantial portion of CompX’s Security Products sales are made through distributors. CompX has a significant North American market share of cabinet lock security product sales as a result of the locksmith distribution channel. CompX supports its locksmith distributor sales with a line of standardized products used by the largest segments of the marketplace. These products are packaged and merchandised for easy availability and handling by distributors and end users.

CompX sells to a diverse customer base with only one customer representing 10% or more of its sales in 2024 (United States Postal Service representing 21%). CompX’s largest ten customers accounted for approximately 47% of its sales in 2024.

Competition – The markets in which CompX participates are highly competitive. CompX competes primarily on the basis of product design, including space utilization and aesthetic factors, product quality and durability, price, on-time delivery, service and technical support. CompX focuses its efforts on the middle and high-end segments of the market, where product design, quality, durability and service are valued by the customer. CompX’s Security Products business competes against a number of domestic and foreign manufacturers. CompX’s Marine Components business competes with small domestic manufacturers and is minimally affected by foreign competitors.

Regulatory and environmental matters – CompX has a history of incorporating environmental management and compliance in its operations and decision making. CompX operates three manufacturing facilities and CompX’s production processes requiring waste-water discharge are consolidated at its Mauldin, South Carolina facility. This facility has received a ReWa Compliance Excellence Award from Renewable Water Resources, an organization which sets regulatory and water policies for the Mauldin facility’s geographic region, for multiple years for its exemplary performance. In addition, CompX operates extensive scrap metal recycling programs to reduce landfill waste.

CompX’s operations are subject to federal, state, and local laws and regulations relating to the use, storage, handling, generation, transportation, treatment, emission, discharge, disposal, remediation of and exposure to hazardous and non-hazardous substances, materials and wastes, some of which are becoming stricter over time. CompX’s operations are also subject to federal, state and local laws and regulations relating to worker health and safety. CompX believes it is in substantial compliance with all such laws and regulations. To date, the costs of maintaining compliance with such laws and regulations have not significantly impacted its results; however, it is possible future laws and regulations may require CompX to incur significant additional expenditures.

CHEMICALS – KRONOS WORLDWIDE, INC.

Business overview – Kronos is a leading global producer and marketer of value-added titanium dioxide pigments, or TiO2, a base industrial product used in a wide range of applications. Kronos, along with its distributors and agents, sells and provides technical services for its products to approximately 3,000 customers in 100 countries with the majority of sales in Europe, North America and the Asia Pacific region. Kronos believes it has developed considerable expertise and efficiency in the manufacture, sale, shipment and service of its products in domestic and international markets. Effective July 16, 2024 (“Acquisition Date”), Kronos acquired the 50% joint venture interest in Louisiana Pigment Company, L.P. (“LPC”) held by Venator Investments, Ltd. (“Venator”) for consideration of $185 million less a working capital adjustment. Prior to the acquisition, Kronos held a 50% joint venture interest in LPC through a wholly-owned subsidiary. LPC was operated as a manufacturing joint venture between Kronos and Venator. Following the acquisition, LPC became a wholly-owned subsidiary of Kronos. See Note 6 to our Consolidated Financial Statements.

TiO2 is a white inorganic pigment used in a wide range of products for its exceptional durability and its ability to impart whiteness, brightness and opacity. TiO2 is a critical component of everyday applications, such as coatings, plastics and paper, as well as many specialty products such as inks, cosmetics and pharmaceuticals. TiO2 is widely considered to be superior to alternative white pigments in large part due to its hiding power (or opacity), which is the ability to cover or mask other materials effectively and efficiently. TiO2 is designed, marketed and sold based on specific end-use applications.

TiO2 is the largest commercially used whitening pigment because it has a high refractive rating, giving it more hiding power than any other commercially produced white pigment. In addition, TiO2 has excellent resistance to interaction with other chemicals, good thermal stability and resistance to ultraviolet degradation. Although there are other white pigments on the market, Kronos believes there are no effective substitutes for TiO2 because no other white pigment has the physical properties for achieving comparable opacity and brightness or can be incorporated in as cost-effective a manner. Pigment extenders such as kaolin clays, calcium carbonate and polymeric opacifiers are used together with TiO2 in a number of end-use markets. However, these products are not able to duplicate the opacity performance characteristics of TiO2 and Kronos believes these products are unlikely to have a significant impact on the use of TiO2.

TiO2 is considered a “quality-of-life” product. Demand for TiO2 has generally been driven by worldwide gross domestic product and has generally increased with rising standards of living in various regions of the world. According to industry estimates, TiO2 consumption has grown at a compound annual growth rate of approximately 3% since 2000. Per capita consumption of TiO2 in Western Europe and North America far exceeds that in other areas of the world, and these regions are expected to continue to be the largest consumers of TiO2 on a per capita basis for the foreseeable future. Kronos believes Western Europe and North America each account for approximately 15% of global TiO2 consumption, respectively. Markets for TiO2 are generally increasing in China, the Asia Pacific region, South America and Eastern Europe and Kronos believes these are significant markets which will continue to grow as economies in these regions develop and quality-of-life products, including TiO2, experience greater demand.

Products and end-use markets – Kronos, including its predecessors, has produced and marketed TiO2 in North America and Europe, its primary markets, for over 100 years. Kronos believes it is the largest chloride process TiO2 producer in Europe with 44% of its 2024 sales volumes attributable to markets in Europe. The table below shows Kronos’ estimated market share for its significant markets, Europe and North America, for the last three years.

Kronos believes it is the leading seller of TiO2 in several countries, including Germany. Overall, Kronos is one of the top five producers of TiO2 in the world.

Kronos offers its customers a broad portfolio of products that include over 50 different TiO2 pigment grades under the KRONOS® trademark, which provide a variety of performance properties to meet customers’ specific requirements. Kronos’ major customers include domestic and international paint, plastics, decorative laminate and paper manufacturers. Kronos ships TiO2 to its customers in either a dry or slurry form via rail, truck and/or ocean carrier. Sales of Kronos’ core TiO2 pigments represented approximately 90% of its net sales in 2024. Kronos and its agents and distributors primarily sell products in three major end-use markets: coatings, plastics and paper.

The following tables show Kronos’ approximate TiO2 sales volume by geographic region and end-use for the year ended December 31, 2024:

Some of the principal applications for Kronos’ products include the following:

TiO2 for coatings – Kronos’ TiO2 is used to provide opacity, durability, tinting strength and brightness in industrial coatings, as well as coatings for commercial and residential interiors and exteriors, automobiles, aircraft, machines, appliances, traffic paint and other special purpose coatings. The amount of TiO2 used in coatings varies widely depending on the opacity, color and quality desired. In general, the higher the opacity requirement of the coating, the greater the TiO2 content.

TiO2 for plastics – Kronos produces TiO2 pigments that improve the optical and physical properties of plastics, including whiteness and opacity. TiO2 is used to provide opacity to items such as containers and packaging materials, and vinyl products such as windows, door profiles and siding. TiO2 also generally provides hiding power, neutral undertone, brightness and surface durability for housewares, appliances, toys, computer cases and food packages. TiO2’s high brightness along with its opacity, is used in some engineering plastics to help mask their undesirable natural color. TiO2 is also used in masterbatch, which is a concentrate of TiO2 and other additives and is one of the largest uses for TiO2 in the plastics end-use market. In masterbatch, the TiO2 is dispersed at high concentrations into a plastic resin and is then used by manufacturers of plastic containers, bottles, packaging and agricultural films.

TiO2 for paper – Kronos’ TiO2 is used in the production of several types of paper, including laminate (decorative) paper, filled paper and coated paper to provide whiteness, brightness, opacity and color stability. Although Kronos sells its TiO2 to all segments of the paper end-use market, its primary focus is on the TiO2 grades used in coated board and paper laminates, where several layers of paper are laminated together using melamine resin under high temperature and pressure. The top layer of paper contains TiO2 and plastic resin and is the layer that is printed with decorative patterns. Paper laminates are used to replace materials such as wood and tile for such applications as counter tops, furniture and wallboard. TiO2 is beneficial in these applications because it assists in preventing the material from fading or changing color after prolonged exposure to sunlight and other weathering agents.

TiO2 for other applications – Kronos produces TiO2 to improve the opacity and hiding power of printing inks. TiO2 allows inks to achieve very high print quality while not interfering with the technical requirements of printing machinery, including low abrasion, high printing speed and high temperatures. Kronos’ TiO2 is also used in textile applications where TiO2 functions as an opacifying and delustering agent. In man-made fibers such as rayon and polyester, TiO2 corrects an otherwise undesirable glossy and translucent appearance. Without the presence of TiO2, these materials would be unsuitable for use in many textile applications.

Kronos produces high-purity sulfate process anatase TiO2 used to provide opacity, whiteness and brightness in a variety of cosmetic and personal care products, such as skin cream, lipstick, eye shadow and toothpaste. In pharmaceuticals, Kronos’ TiO2 is used commonly as a colorant in tablet and capsule coatings as well as in liquid medicines to provide uniformity of color and appearance. KRONOS® purified anatase grades meet the applicable requirements of the CTFA (Cosmetics, Toiletries and Fragrances Association), USP (United States Pharmacopoeia) and BP (British Pharmacopoeia) and the FDA (United States Food and Drug Administration).

Kronos’ TiO2 business is enhanced by the following three complementary businesses, which comprised approximately 10% of its net sales in 2024:

• Kronos owns and operates an ilmenite mine in Norway pursuant to a governmental concession with an unlimited term. Ilmenite is a raw material used directly as a feedstock by some sulfate-process TiO2 plants. Along with supplying ilmenite ore to its sulfate plants in Europe, Kronos also sells ilmenite ore to third parties, some of whom are its competitors. The mine has estimated ilmenite reserves that it expects, based on internal estimates, to last approximately 50 years.
• Kronos manufactures and sells iron-based chemicals, which are co-products and processed co-products of sulfate and chloride process TiO2 pigment production. These co-product chemicals are marketed through its Ecochem division and are primarily used as treatment and conditioning agents for industrial effluents and municipal wastewater as well as in the manufacture of iron pigments, cement and agricultural products.
• Kronos manufactures and sells other specialty chemicals, which are side-stream products from the production of TiO2. These specialty chemicals are used in applications in the formulation of pearlescent pigments, production of electroceramic capacitors for cell phones and other electronic devices and natural gas pipe and other specialty applications.

Manufacturing, operations and properties

Manufacturing – Kronos produces TiO2 in two crystalline forms: rutile and anatase. Rutile TiO2 is manufactured using both a chloride production process and a sulfate production process, whereas anatase TiO2 is only produced using a sulfate production process. Manufacturers of many end-use applications can use either form, especially during periods of tight supply for TiO2. The chloride process is the preferred form for use in coatings and plastics, the two largest end-use markets. Due to environmental factors and customer considerations, the proportion of TiO2 industry sales represented by chloride process pigments has remained stable relative to sulfate process pigments, and in 2024, chloride process production facilities represented approximately 41% of industry capacity. The sulfate process is preferred for use in selected paper products, ceramics, rubber tires, man-made fibers, food products, pharmaceuticals and cosmetics. Once an intermediate TiO2 pigment has been produced by either the chloride or sulfate process, it is “finished” into products with specific performance characteristics for particular end-use applications through proprietary processes involving various chemical surface treatments and intensive micronizing (milling).

• Chloride process – The chloride process is a continuous process in which chlorine is used to extract rutile TiO2. The chloride process produces less waste than the sulfate process because much of the chlorine is recycled and feedstock bearing higher titanium content is used. The chloride process also has lower energy requirements and is less labor-intensive than the sulfate process, although the chloride process requires a higher-skilled labor force. The chloride process produces an intermediate base pigment with a wide range of properties. The chloride process produces a product with a blueish undertone and is the preferred form to produce TiO2 pigments for use in coatings and plastics, the two largest end-use markets.
• Sulfate process – The sulfate process is a batch process in which sulfuric acid is used to extract the TiO2 from ilmenite or titanium slag. After separation from the impurities in the ore (mainly iron), the TiO2 is precipitated and calcined to form an intermediate base pigment ready for sale or can be upgraded through finishing treatments. The sulfate process produces a warmer undertone and is preferred for use in selected paper products, ceramics, rubber tires, man-made fibers, food products, pharmaceuticals and cosmetics, some of which generate higher profit margins.

LPC – Prior to July 16, 2024, Kronos Louisiana, Inc., one of Kronos’ subsidiaries, and Venator each owned a 50% interest in LPC, which was operated as a manufacturing joint venture. LPC owns and operates a chloride-process TiO2 plant located near Lake Charles, Louisiana. On July 16, 2024 Kronos acquired the remaining 50% interest in LPC held by Venator for consideration of $185 million less a working capital adjustment.

Prior to the acquisition, Kronos accounted for its interest in the joint venture by the equity method. The joint venture operated on a break-even basis and therefore Kronos did not have any equity in earnings of the joint venture. Kronos was required to purchase one half of the TiO2 produced by the joint venture. All costs and capital expenditures were shared equally with Venator, with the exception of feedstock (purchased natural rutile ore or chlorine slag) and packaging costs for the pigment grades produced. Kronos’ share of net costs was reported as cost of sales as the TiO2 was sold. See Note 6 to our Consolidated Financial Statements.

Operations – Kronos produced 492,000, 401,000, and 535,000 metric tons of TiO2 in 2022, 2023 and 2024, respectively. Kronos’ production volumes for 2022, 2023 and 2024 through the Acquisition Date include its share of the output produced by its TiO2 manufacturing joint venture. Subsequent to the Acquisition Date, Kronos’ 2024 production volumes include 100% of the production volumes from the LPC facility.

Kronos’ average production capacity utilization rates were approximately 89% in 2022, 72% in 2023 and 96% in 2024. Beginning in the fourth quarter of 2022 and continuing throughout the first quarter of 2024, Kronos adjusted production levels to correspond with reduced customer demand resulting from challenging economic conditions and geopolitical uncertainties. Kronos increased production levels to align with higher overall customer demand in 2024.

Properties – Kronos operates facilities throughout North America and Europe. Kronos has four TiO2 plants in Europe (one in each of Leverkusen, Germany; Nordenham, Germany; Langerbrugge, Belgium; and Fredrikstad, Norway). In North America, Kronos has a TiO2 plant in Varennes, Quebec, Canada and a TiO2 plant near Lake Charles, Louisiana.

Kronos’ chloride process production and remaining sulfate production capacity has increased by approximately 5% over the past ten years due to debottlenecking programs with only moderate capital expenditures.

The following table presents the division of Kronos’ expected 2025 manufacturing capacity by plant location and type of manufacturing process:

(1) The Leverkusen facility is located within a more extensive manufacturing complex. Kronos owns its Leverkusen facility, which represents approximately 29% of Kronos’ current TiO2 production capacity, but Kronos leases the land under the facility under a long-term agreement which expires in 2050. Lease payments are periodically negotiated for periods of at least two years at a time. A third-party operator of the manufacturing complex provides some raw materials including chlorine, auxiliary and operating materials, utilities and services necessary to operate the Leverkusen facility under separate supplies and services agreements.

(2) The Fredrikstad facility is located on public land and is leased until 2063.

(3) In the third quarter of 2024, Kronos closed its sulfate process line at its plant in Varennes, Canada.

(4) Effective July 16, 2024, Kronos obtained full control of LPC. Kronos now fully operates the facility near Lake Charles, Louisiana and owns the land and facility.

Kronos owns the land underlying all of its principal production facilities unless otherwise indicated in the table above.

Kronos also operates an ilmenite mine in Norway pursuant to a governmental concession with an unlimited term. In addition, Kronos operates a rutile slurry manufacturing plant near its Lake Charles, Louisiana, facility, which converts dry pigment primarily manufactured for Kronos at the Lake Charles TiO2 facility into a slurry form that is then shipped to customers.

Kronos has corporate and administrative offices located in the U.S., Germany, Norway, Canada, Belgium, and France.

Raw materials – The primary raw materials used in chloride process TiO2 are titanium-containing feedstock (purchased natural rutile ore or chlorine slag), chlorine and petroleum coke. Chlorine is available from a number of suppliers, while petroleum coke is available from a limited number of suppliers. Titanium-containing feedstock suitable for use in the chloride process is available from a limited but increasing number of suppliers principally in Australia, South Africa, Sierra Leone, Canada and India. Kronos purchases feedstock for its chloride process TiO2 from the following primary suppliers for certain contractually specified volumes for delivery extending, in some cases, through 2026:

In the past Kronos has been, and expects it will continue to be, successful in obtaining short-term and long-term extensions to these and other existing supply contracts. Kronos expects the raw materials purchased under these contracts, and contracts it may enter into, will meet its chloride process feedstock requirements over the next several years. Multi-year contracts generally may be terminated with a 12-month written notice or based on certain defaults by either party or failure to agree on pricing as noted in the agreements.

The primary raw materials used in sulfate process TiO2 are titanium-containing feedstock, primarily ilmenite or purchased sulfate grade slag, and sulfuric acid. Sulfuric acid is available from a number of suppliers. Titanium-containing feedstock suitable for use in the sulfate process is available from a limited number of suppliers principally in Norway, Canada, Australia, India and South Africa. As one of the few vertically-integrated producers of sulfate process TiO2, Kronos operates a rock ilmenite mine in Norway, which provided all of the feedstock for its European sulfate process TiO2 plants in 2024. Kronos expects ilmenite production from its mine to meet its sulfate process feedstock requirements for the foreseeable future. Kronos expects the raw materials purchased under this contract, and contracts that it may enter into, to meet its sulfate process feedstock requirements over the next several years.

Many of Kronos’ raw material contracts contain fixed quantities it is required to purchase or specify a range of quantities within which it is required to purchase. The pricing under these agreements is generally negotiated quarterly or semi-annually.

The following table summarizes Kronos’ raw materials purchased or mined in 2024.

(In thousands of

(1) Relates to Kronos’ Canadian sulfate production line, which was closed in the third quarter of 2024.

Sales and marketing – Kronos’ marketing strategy is aimed at developing and maintaining strong relationships with new and existing customers. Because TiO2 represents a significant input cost for its customers, the purchasing decisions are often made by its customers’ senior management. Kronos works to maintain close relationships with the key decision makers through in-depth and frequent contact. Kronos endeavors to extend these commercial and technical relationships to multiple levels within its customers’ organizations using its direct sales force and technical service group to accomplish this objective. Kronos believes this helps build customer loyalty and strengthens its competitive position. Close cooperation and strong customer relationships enable Kronos to stay closely attuned to trends in its customers’ businesses. Where appropriate, Kronos works in conjunction with its customers to solve formulation or application problems by modifying specific product properties or developing new pigment grades. Kronos also focuses its sales and marketing efforts on those geographic and end-use market segments where it believes it can realize higher selling prices. This focus includes continuously reviewing and optimizing its customer and product portfolios.

Kronos also works directly with its customers to monitor the success of its products in their end-use applications, evaluate the need for improvements in its product and process technology and identify opportunities to develop new product solutions for its customers. Kronos’ marketing staff closely coordinates with its sales force and technical specialists to ensure the needs of its customers are met, and to help develop and commercialize new grades where appropriate.

Kronos sells a majority of its products through its direct sales force operating in Europe and North America. Kronos also utilizes sales agents and distributors who are authorized to sell its products in specific geographic areas. In Europe, Kronos’ sales efforts are conducted primarily through its direct sales force and its sales agents. Kronos’ agents do not sell any TiO2 products other than KRONOS® branded products. In North America, Kronos’ sales are made primarily through its direct sales force and supported by a network of distributors. Kronos has increased its marketing efforts over the last several years in export markets and Kronos’ sales are now made through its direct sales force, sales agents and distributors. In addition to Kronos’ direct sales force and sales agents, many of its sales agents also act as distributors to service its customers in all regions. Kronos offers customer and technical service to customers who purchase its products through distributors as well as to its larger customers serviced by its direct sales force.

Kronos sells to a diverse customer base with only one customer representing 10% or more of its net sales in 2024 (Behr Process Corporation – 10%). Kronos’ largest ten customers accounted for approximately 39% of net sales in 2024.

Neither Kronos’ business as a whole nor any of its principal product groups is seasonal to any significant extent. However, TiO2 sales are generally higher in the second and third quarters of the year, due in part to the increase in coatings production in the spring to meet demand during the spring and summer painting seasons. Kronos normally builds inventories during the first and fourth quarters of each year in order to maximize its product availability during the higher demand periods normally experienced in the second and third quarters.

Competition – The TiO2 industry is highly competitive. Kronos competes primarily on the basis of price, product quality, technical service and the availability of high performance pigment grades. Since TiO2 is not traded through a commodity market, its pricing is largely a product of negotiation between suppliers and their respective customers. Price and availability are the most significant competitive factors along with quality and customer service for the majority of its product grades. Increasingly, Kronos is focused on providing pigments that are differentiated to meet specific customer requests and specialty grades that are differentiated from its competitors’ products. During 2024, Kronos had an estimated 7% share of worldwide TiO2 sales volume, and based on sales volume Kronos believes it is the leading seller of TiO2 in several countries, including Germany.

Kronos’ principal competitors are LB Group Co. Ltd, The Chemours Company, Tronox Holdings PLC and Venator Materials PLC. The top five TiO2 producers (i.e. Kronos and its four principal competitors) account for approximately 51% of the world’s production capacity.

The following chart shows Kronos’ estimate of worldwide production capacity in 2024:

Chemours has approximately one-half of total North American TiO2 production capacity and is Kronos’ principal North American competitor. LB Group previously announced it plans to add an additional 200,000 tons of chloride capacity which we expect will be added incrementally over the next several years. However, several of Kronos’ competitors have recently closed or announced plans to close facilities or otherwise reduce capacity, including Chemours which closed its Taiwan facility with an estimated 160,000 tons of chloride process capacity in 2023 and Venator which announced plans in 2024 to close its Duisburg, Germany facility with an estimated 50,000 tons of sulfate process capacity. In addition, in 2024 Kronos closed its sulfate production line in Varennes, Canada.

The TiO2 industry is characterized by high barriers to entry consisting of high capital costs, proprietary technology and significant lead times required to construct new facilities or to expand existing capacity. Therefore, over the past ten years, Kronos and its competitors increased industry capacity through debottlenecking projects; however, this increase only partly compensated for the shut-down of various TiO2 plants throughout the world. Other than through debottlenecking projects and the LB Group expansion mentioned above, Kronos does not expect any significant efforts will be undertaken by Kronos or its principal competitors to further increase capacity and Kronos believes it is unlikely any new TiO2 plants will be constructed in Europe or North America for the foreseeable future. If actual developments differ from Kronos’ expectations, the TiO2 industry and Kronos’ performance could be unfavorably affected.

Research and development – Kronos employs scientists, chemists, process engineers and technicians who are engaged in research and development, process technology and quality assurance activities in Leverkusen, Germany. These individuals have the responsibility for improving Kronos’ chloride and sulfate production processes, improving product quality and strengthening Kronos’ competitive position by developing new products and applications. Kronos’ expenditures for these activities were approximately $15 million in 2022, $18 million in 2023 and $14 million in 2024. Kronos expects to spend approximately $15 million on research and development in 2025.

Kronos continually seeks to improve the quality of its grades and has been successful in developing new grades for existing and new applications to meet the needs of its customers and increase product life cycles. Since the beginning of 2020, Kronos has added six new grades for pigments and other applications.

Patents, trademarks, trade secrets and other intellectual property rights – Kronos has a comprehensive intellectual property protection strategy that includes obtaining, maintaining and enforcing its patents, primarily in the United States, Canada and Europe. Kronos also registers, maintains, and protects its trademark rights. Kronos maintains the secrecy of its trade secret rights and protects them by means of security protocols and confidentiality agreements. In some instances, Kronos has entered into license agreements with third parties concerning various intellectual property matters. Kronos has also from time to time been involved in disputes over intellectual property.

Patents – Kronos has obtained patents and has numerous patent applications pending that cover certain aspects of its products and the technology used in the manufacture of its products. Kronos’ patent strategy is important to it and its continuing business activities. In addition to maintaining its patent portfolio, Kronos seeks patent protection for its technical developments, principally in the United States, Canada and Europe. U.S. patents are generally in effect from the time that they issue as patents and then extend for 20 years from the date of filing. Kronos’ U.S. patent portfolio includes patents having remaining terms ranging from one year to 19 years.

Trademarks – Kronos trademarks, including KRONOS®, are covered by issued and/or pending registrations, including in Canada and the United States. Kronos protects the trademarks it uses in connection with the products it manufactures and sells and has developed goodwill in connection with its long-term use of its trademarks.

Trade secrets – Kronos conducts research activities in secret and it protects the confidentiality of its trade secrets through reasonable measures, including confidentiality agreements and security procedures, including data security. Kronos relies upon unpatented proprietary knowledge and continuing technological innovation and other trade secrets to develop and maintain its competitive position. Kronos’ proprietary chloride production process is an important part of its technology and Kronos’ business could be harmed if it fails to maintain confidentiality of its trade secrets used in this technology.

Regulatory and environmental matters – Kronos’ operations and properties are governed by various environmental laws and regulations which are complex, change frequently and have tended to become stricter over time. These environmental laws govern, among other things, the generation, storage, handling, use and transportation of hazardous materials; the emission and discharge of hazardous materials into the ground, air or water; and the health and safety of its employees. Certain of Kronos’ operations are, or have been, engaged in the generation, storage, handling, manufacture or use of substances or compounds that may be considered toxic or hazardous within the meaning of applicable environmental laws and regulations. As with other companies engaged in similar businesses, certain of Kronos’ past and current operations and products have the potential to cause environmental or other damage. Kronos has implemented and continues to implement various policies and programs in an effort to minimize these risks. Kronos’ policy is to comply with applicable environmental laws and regulations at all its facilities and to strive to improve its environmental performance and overall sustainability. It is possible that future developments, such as stricter requirements in environmental laws and enforcement policies, could adversely affect its operations, including production, handling, use, storage, transportation, sale or disposal of hazardous or toxic substances or require Kronos to make capital and other expenditures to comply, and could adversely affect its consolidated financial position and results of operations or liquidity.

Kronos has a history of identifying new ways to reduce consumption and waste by converting byproducts to co-products through its KRONOS ecochem® products. Kronos has a published Safety, Environment, Energy and Quality Policy which is translated into local languages and distributed to all its employees and shared publicly via its website. Kronos has implemented rigorous procedures for incident reporting and investigation, including root cause analysis of environmental and safety incidents and near misses. Because TiO2 production requires significant energy input, Kronos is focused on energy efficiency at all production locations. Four of its six production facilities maintain certifications to the ISO 50001:2018 Energy Management standard and all locations have local energy teams in place. These teams are responsible for maintaining ISO 50001:2018 certifications (where applicable), performing regular reviews of local energy consumption, making recommendations regarding capital projects that reduce energy consumption and associated Greenhouse Gas (GHG) emissions or enhance efficiency. When possible, Kronos looks for opportunities to partner with local government authorities through grant opportunities to reduce energy consumption and associated GHG emissions. Kronos also actively manages potential water-related risks, including flooding and water shortages. Kronos’ manufacturing facilities are strategically located adjacent to sources of water, which it uses for process operations and for shipping and receiving raw materials and finished products. Water-critical processes are identified and ongoing efforts to minimize water use are incorporated into environmental planning.

Kronos’ U.S. manufacturing operations are governed by federal, state and local environmental and worker health and safety laws and regulations. These include the Resource Conservation and Recovery Act, or RCRA, the Occupational Safety and Health Act, the Clean Air Act, the Clean Water Act, the Safe Drinking Water Act, the Toxic Substances Control Act and the Comprehensive Environmental Response, Compensation and Liability Act, as amended by the Superfund Amendments and Reauthorization Act, or CERCLA, as well as the state counterparts of these statutes. Some of these laws hold current or previous owners or operators of real property liable for the costs of cleaning up contamination, even if these owners or operators did not know of, and were not responsible for, such contamination. These laws also assess liability on any person who arranges for the disposal or treatment of hazardous substances, regardless of whether the affected site is owned or operated by such person. Although Kronos has not incurred and does not currently anticipate any material liabilities in connection with such environmental laws, Kronos may be required to make expenditures for environmental remediation in the future.

While the laws regulating operations of industrial facilities in Europe vary from country to country, a common regulatory framework is provided by the European Union, or the EU. Germany and Belgium are members of the EU and follow its initiatives. Norway is not a member but generally patterns its environmental regulatory actions after those of the EU.

From time to time, Kronos’ facilities may be subject to environmental regulatory enforcement under local or national laws. Typically, Kronos updates its compliance programs to resolve these matters. Occasionally, Kronos may pay penalties. To date, such penalties have not involved amounts having a material adverse effect on Kronos’ consolidated financial position, results of operations or liquidity. Kronos believes that all of its facilities are in substantial compliance with applicable environmental laws.

From time to time, new environmental, sustainability, health and safety regulations are passed or proposed in the countries in which Kronos operates or sells its products, seeking to regulate its operations or to restrict, limit or classify TiO2. Kronos believes that it is in substantial compliance with laws applicable to the regulation of TiO2. However, increased regulatory scrutiny could affect consumer perception of TiO2 or limit the marketability and demand for TiO2 or products containing TiO2 and increase its regulatory and compliance costs.

On October 1, 2021, EU Regulation No. 1272/2008 classifying dry TiO2 and mixtures containing dry TiO2 as a suspected carcinogen via inhalation went into force. Kronos’ dry TiO2 products do not meet the criteria set forth in the regulation and therefore do not require classification labels. On November 23, 2022 the Court of Justice of the European Union annulled the classification of TiO2 as a suspected carcinogen in its entirety, which decision is currently under appeal.

Kronos’ capital expenditures related to ongoing environmental compliance, protection and improvement programs, including capital expenditures which are primarily focused on increasing operating efficiency but also result in improved environmental protection such as lower emissions from its manufacturing facilities, were $17 million in 2024 and are currently expected to be approximately $24 million in 2025.

ENVIRONMENTAL, SOCIAL AND GOVERNANCE (ESG)

Through our subsidiaries and affiliates, we seek to operate our businesses in line with sound ESG principles that include corporate governance, social responsibility, sustainability and cybersecurity. We believe ESG means conducting operations with high standards of environmental and social responsibility, practicing exemplary ethical standards, focusing on safety as a top priority, respecting human rights and supporting our local communities, and continuously developing our employees. At their facilities, Kronos and CompX undertake various environmental sustainability programs, and promote social responsibility and volunteerism through programs designed to support and give back to the local communities in which each operates. Each of Kronos’ and CompX’s locations maintain site-specific safety programs and disaster response and business continuity plans. All manufacturing facilities have detailed, site-specific emergency response procedures Kronos and CompX believe adequately address regulatory compliance, vulnerability to potential hazards, emergency response and action plans, employee training, alarms and warning systems and crisis communication.

The U.S. government and various non-U.S. governmental agencies of countries in which Kronos operates have adopted or are contemplating regulatory changes relating to certain ESG topics, such as the Corporate Social Responsibility Directive adopted by the European Union on November 28, 2022 (EU CSRD). Kronos is evaluating and will continue to evaluate the applicability of the EU CSRD as regulatory guidance is issued and as the European countries in which it operates adopt implementing legislation and it will establish a compliance program to address any applicable requirements.

In an effort to align our non-employee directors’ financial interests with those of our stockholders, our board of directors established share ownership guidelines for our non-management directors. In addition, we have adopted an insider trading policy that applies to both employees and non-employee directors.

Kronos has taken steps to integrate ESG considerations into operating decisions with other critical business factors. Kronos periodically publishes an ESG Report, which is available on its public website. The primary purpose of its ESG Report is to describe Kronos’ policies and programs in the area of ESG, including certain internal metrics and benchmarks related to various aspects of ESG. Kronos voluntarily developed these internal metrics and benchmarks, which Kronos uses to identify progress and opportunities for improvement. These metrics are not intended to be directly comparable to similar metrics utilized by other companies to track ESG performance, as the standards, methodologies and assumptions used to determine these metrics vary by company and jurisdiction.

HUMAN CAPITAL RESOURCES

Employees – We operate through our subsidiaries and affiliate and through our intercorporate services agreement with Contran (see Note 16 to our Consolidated Financial Statements). We have no direct employees. Our operating results depend in part on Kronos’ and CompX’s ability to successfully manage their human capital resources, including attracting, identifying and retaining key talent. Kronos and CompX each have a well-trained labor force with a substantial number of long-tenured employees. Kronos and CompX provide competitive compensation and benefits to their employees, some of which for Kronos are offered under collective bargaining agreements. In addition to salaries, these programs, which vary by country/region, can include annual bonuses, a defined benefit pension plan (for Kronos), a defined contribution plan with employer matching, a profit sharing plan, healthcare and insurance benefits, health savings and flexible spending accounts, paid time off, family leave, family care resources, employee assistance programs and tuition assistance.

We recognize that everyone deserves respect and equal treatment. Kronos and CompX embrace diversity and collaboration in their workforces and business initiatives. Kronos and CompX are equal opportunity employers, and base employment decisions on merit, competence and qualifications, without regard to race, color, national origin, gender, age, religion, disability, sex, sexual orientation or other characteristics protected by applicable law in the jurisdictions in which they operate. Kronos and CompX promote a respectful, diverse and inclusive workplace in which all individuals are treated with respect and dignity.

As of December 31, 2024, CompX employed 510 people, all in the United States.

As of December 31, 2024, Kronos employed the following number of people:

CompX believes its labor relations are good at all of its facilities. Certain employees at each of Kronos’ production facilities are organized by labor unions. Kronos strives to maintain good relationships with all its employees, including the unions and workers’ councils representing those employees. In Europe, Kronos’ union employees are covered by master collective bargaining agreements for the chemical industry that are generally renewed annually. At December 31, 2024, approximately 75% of Kronos’ worldwide workforce is organized under collective bargaining agreements. Kronos did not experience any work stoppages during 2024, although it is possible that there could be future work stoppages or other labor disruptions that could materially and adversely affect its business, results of operations, financial position or liquidity.

Health and safety – Kronos and CompX believe protecting the health and safety of their workforce, customers, business partners and the natural environment are core values. Kronos and CompX are committed to maintaining a strong safety culture where all workers meet or exceed required industry performance standards and continuously seek to improve occupational and process safety performance. Kronos and CompX are conducting their businesses in ways that provide all personnel with a safe and healthy work environment and have established safety and environmental programs and goals to achieve such results. Kronos and CompX expect their manufacturing facilities to produce products safely and in compliance with local regulations, policies, standards and practices intended to protect the environment and people and have established global policies designed to promote such compliance. Kronos and CompX require their employees to comply with such requirements. Kronos and CompX provide their workers with the tools and training necessary to make the appropriate decisions to prevent accidents and injuries. Each of Kronos’ and CompX’s operating facilities develops, maintains and implements safety programs encompassing key aspects of their operations. In addition, management reviews and evaluates safety performance throughout the year.

CompX uses lost time incidents as a key measure of worker safety. CompX defines lost time incidents as work-related accidents where a worker sustains an injury that results in time away from work. CompX had three lost time incidents in 2022 and one in each of 2023 and 2024.

Kronos monitors conditions that could lead to a safety incident and keep track of injuries through reporting systems in accordance with laws in the jurisdictions in which it operates. With this data Kronos calculates incident frequency rates to assess the quality of its safety performance. Kronos also tracks overall safety performance at the global level. Each Kronos operating location is subject to local laws and regulations that dictate what injuries are required to be recorded and reported, which may differ from location to location and result in different methods of injury rate calculation. For internal global tracking, benchmarking and identification of opportunities for improvement, Kronos collects the location specific information and applies a U.S.-based injury rate calculation to arrive at a global total frequency rate, which is expressed as the number of incidents at its operating locations per 200,000 hours. This internal safety metric may not be directly comparable to a recordable incident rate calculated under U.S. law. Kronos’ global total frequency rate aggregating information about employees and contractors was 1.01 in 2022 (0.86 of the aggregate represents employees only), 0.95 in 2023 (0.74 of the aggregate represents employees only) and 0.70 in 2024 (0.80 of the aggregate represents employees only).

OTHER

In addition to our 87% ownership of CompX and our 31% ownership of Kronos at December 31, 2024, we also hold certain marketable securities and other investments. See Note 5 to our Consolidated Financial Statements.

Regulatory and environmental matters – We discuss regulatory and environmental matters in the respective business sections contained elsewhere herein and in Item 3 – “Legal Proceedings.” In addition, the information included in Note 17 to our Consolidated Financial Statements under the captions “Lead pigment litigation” and “Environmental matters and litigation” is incorporated herein by reference.

Insurance – We maintain insurance for our businesses and operations, with customary levels of coverage, deductibles and limits. See also Item 3 – “Legal Proceedings – Insurance coverage claims” and Note 17 to our Consolidated Financial Statements.

Business strategy – We routinely compare our liquidity requirements and alternative uses of capital against the estimated future cash flows we expect to receive from our subsidiaries and affiliates. As a result of this process, we have in the past and may in the future seek to raise additional capital, incur debt, repurchase indebtedness in the market, modify our dividend policies, consider the sale of our interests in our subsidiaries, affiliates, business, marketable securities or other assets, or take a combination of these and other steps, to increase liquidity, reduce indebtedness and fund future activities. Such activities have in the past and may in the future involve related companies. From time to time, we also evaluate the restructuring of ownership interests among our respective subsidiaries and related companies.

We and other entities that may be affiliated with Contran routinely evaluate acquisitions of interests in, or combinations with, companies, including related companies that provide strategic opportunities and synergies or that we perceive to be undervalued in the marketplace. These companies may or may not be engaged in businesses related to our current businesses. In some instances, we have actively managed the businesses acquired with a focus on maximizing return-on-investment through cost reductions, capital expenditures, improved operating efficiencies, selective marketing to address market niches, disposition of marginal operations, use of leverage and redeployment of capital to more productive assets. In other instances, we have disposed of the acquired interest in a company prior to gaining control. We intend to consider such activities in the future and may, in connection with such activities, consider issuing additional equity securities and increasing our indebtedness.

Available information – Our fiscal year ends December 31. We furnish our shareholders with annual reports containing audited financial statements. In addition, we file annual, quarterly and current reports, proxy and information statements and other information with the SEC. Our consolidated subsidiary (CompX) and our significant equity method investee (Kronos) also file annual, quarterly, and current reports, proxy and information statements and other information with the SEC. We also make our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments thereto available free of charge through our website at www.nl-ind.com (http://www.nl-ind.com) as soon as reasonably practicable after they have been filed with the SEC. We also provide to anyone, without charge, copies of such documents upon written request. Such requests should be directed to the attention of the Corporate Secretary at our address on the cover page of this Form 10-K. Additional information, including our Audit Committee Charter, our Code of Business Conduct and Ethics and our Corporate Governance Guidelines can be found on our website. Information contained on our website is not part of this Annual Report.

We are an electronic filer and the SEC maintains an internet website that contains reports, proxy and information statements and other information regarding issuers that file electronically with the SEC at www.sec.gov (http://www.sec.gov).

Listed below are certain risk factors associated with us and our businesses. See also certain risk factors discussed in Item 7 – “Management’s Discussion and Analysis of Financial Condition and Results of Operations – Critical Accounting Policies and Estimates.” In addition to the potential effect of these risk factors, any risk factor which could result in reduced earnings or operating losses, or reduced liquidity, could in turn adversely affect our ability to service our liabilities or pay dividends on our common stock or adversely affect the quoted market prices for our securities.

Operational Risk Factors

Demand for, and prices of, certain of Kronos’ products are influenced by changing market conditions for its products, which may result in reduced earnings or in operating losses.

Kronos’ sales and profitability are largely dependent on the TiO2 industry. In 2024, approximately 90% of Kronos’ sales were attributable to sales of TiO2. TiO2 is used in many “quality of life” products for which demand historically has been linked to global, regional and local gross domestic product and discretionary spending, which can be negatively impacted by regional and world events or economic conditions. Such events are likely to cause a decrease in demand for Kronos’ products and, as a result, may have an adverse effect on our results of operations and financial condition.

Pricing within the global TiO2 industry over the long term is cyclical and changes in economic conditions worldwide can significantly impact Kronos’ earnings and operating cash flows. Historically, the markets for many of Kronos’ products have experienced alternating periods of increasing and decreasing demand. Relative changes in the selling prices for Kronos’ products are one of the main factors that affect the level of its profitability. In periods of increasing demand, Kronos’ selling prices and profit margins generally will tend to increase, while in periods of decreasing demand Kronos’ selling prices and profit margins generally tend to decrease. In addition, pricing may affect customer inventory levels as customers may from time to time accelerate purchases of TiO2 in advance of anticipated price increases or defer purchases of TiO2 in advance of anticipated price decreases. Kronos’ ability to further increase capacity without additional investment in greenfield or brownfield capacity may be limited and as a result, Kronos’ profitability may become even more dependent upon the selling prices of its products.

The TiO2 industry is concentrated and highly competitive and Kronos faces price pressures in the markets in which it operates, which may result in reduced earnings or operating losses.

The global market in which Kronos operates its business is concentrated, with the top five TiO2 producers accounting for approximately 51% of the world’s production capacity and is highly competitive. Competition is based on a number of factors, such as price, product quality and service. Kronos faces significant competition from international and regional competitors, including TiO2 producers in China, who have significant sulfate production process capacity. Chinese producers have also continued to develop chloride process technology, and the risk of substitution of Kronos’ products with products made by Chinese producers could increase if Chinese producers increase the use of chloride process technology and improve the quality of their sulfate and chloride products. Some of Kronos’ competitors may be able to drive down prices for Kronos’ products if their costs are lower than Kronos’ costs, including its competitors with vertically integrated sources of raw materials for the chloride process who may have a competitive advantage during periods of high or rising raw material costs or who operate in regions with less stringent regulatory requirements. In addition, some of Kronos’ competitors’ financial, technological and other resources may be greater than its resources and such competitors may be better able to withstand changes in market conditions. Kronos’ competitors may be able to respond more quickly than it can to new or emerging technologies and changes in customer requirements. Further, consolidation of Kronos’ competitors or customers may result in reduced demand for its products or make it more difficult for Kronos to compete with its competitors. The occurrence of any of these events could result in reduced earnings or operating losses.

CompX operates in mature and highly competitive markets, resulting in pricing pressure and the need to continuously reduce costs.

Many of the markets CompX serves are highly competitive, with a number of competitors offering similar products. CompX focuses its efforts on the middle and high-end segment of the market where it feels that it can compete due to the importance of product design, quality and durability to the customer. However, CompX’s ability to effectively compete is impacted by a number of factors. The occurrence of any of these factors could result in reduced earnings or operating losses.

• Competitors may be able to drive down prices for CompX’s products beyond its ability to adjust costs because their costs are lower than CompX, especially products sourced from Asia.
• Competitors’ financial, technological and other resources may be greater than CompX’s resources, which may enable them to more effectively withstand changes in market conditions.
• Competitors may be able to respond more quickly than CompX can to new or emerging technologies and changes in customer requirements.
• Consolidation of CompX’s competitors or customers in any of the markets in which it competes may result in reduced demand for its products.
• A reduction of CompX’s market share with one or more of its key customers, or a reduction in one or more of its key customers’ market share for their end-use products, may reduce demand for its products.
• New competitors could emerge by modifying their existing production facilities to manufacture products that compete with CompX’s products.
• CompX may not be able to sustain a cost structure that enables it to be competitive.
• Customers may no longer value CompX’s product design, quality or durability over the lower cost products of its competitors.

CompX’s development of innovative features for current products is critical to sustaining and growing its sales.

Historically, CompX’s ability to provide value-added custom engineered products that address requirements of technology and space utilization has been a key element of its success. CompX spends a significant amount of time and effort to refine, improve and adapt its existing products for new customers and applications. Since expenditures for these types of activities are not considered research and development expense under accounting principles generally accepted in the United States of America (“GAAP”), the amount of CompX’s research and development expenditures, which is not significant, is not indicative of the overall effort involved in the development of new product features. The introduction of new product features requires the coordination of the design, manufacturing and marketing of the new product features with current and potential customers. The ability to coordinate these activities with current and potential customers may be affected by factors beyond CompX’s control. While CompX will continue to emphasize the introduction of innovative new product features that target customer-specific opportunities, it does not know if any new product features it introduces will achieve the same degree of success that it has achieved with its existing products. At times CompX works with new and existing customers on specific product innovations. Sometimes CompX has a cost sharing arrangement for development efforts although it may also fully bear the development costs. If a customer were to ultimately reject or abandon custom product innovation efforts, CompX may not be able to recover its development costs.

Higher costs or unavailability of CompX’s raw materials could negatively impact our financial results.

Certain raw materials used in CompX’s products are commodities that are subject to significant fluctuations in price in response to world-wide supply and demand as well as speculative investor activity. Zinc and brass are the principal raw materials used in the manufacture of security products. Stainless steel and aluminum are the major raw materials used in the manufacture of marine components. These raw materials are purchased from several suppliers and are generally readily available from numerous sources. CompX occasionally enters into short-term raw material supply arrangements to mitigate the impact of future increases in commodity-related raw material costs and ensure supply. Materials purchased outside of these arrangements are sometimes subject to unanticipated and sudden price increases.

Certain components used in CompX’s products are manufactured by foreign suppliers located in China and elsewhere. Global economic and political conditions, including natural disasters, terrorist acts, transportation disruptions, global conflicts and public health crises such as pandemics, could prevent CompX’s vendors from being able to supply these components. Should CompX’s vendors not be able to meet their supply obligations or should CompX be otherwise unable to obtain necessary raw materials or components, CompX may incur higher supply costs or may be required to reduce production levels, either of which may decrease our liquidity or negatively impact our financial condition or results of operations as CompX may be unable to offset the higher costs with increases in its selling prices or reductions in other operating costs.

Higher costs or limited availability of Kronos’ raw materials may reduce its earnings and decrease its liquidity. In addition, many of Kronos’ raw material contracts contain fixed quantities it is required to purchase.

For Kronos, the number of sources for and availability of certain raw materials is specific to the particular geographical region in which its facilities are located. Titanium-containing feedstocks suitable for use in Kronos’ TiO2 facilities are available from a limited number of suppliers around the world. Political and economic instability or increased regulations in the countries from which Kronos purchases or mines its raw material supplies could adversely affect raw material availability. If Kronos or Kronos’ worldwide vendors are unable to meet their planned or contractual obligations and Kronos was unable to obtain necessary raw materials, Kronos could incur higher costs for raw materials or may be required to reduce production levels. Kronos experienced increases in feedstock costs in 2023 and 2024, for example, which affected its margins. Kronos has also experienced higher operating costs such as energy costs. Future variations in the cost of energy, which primarily reflect market prices for oil and natural gas, and for raw materials may significantly affect its operating results and decrease liquidity as Kronos may not always be able to increase its selling prices to offset the impact of any higher costs or reduced production levels.

Kronos has supply contracts that provide for its TiO2 feedstock requirements. While Kronos believes it will be able to renew these contracts, as necessary, Kronos does not know if it will be successful in renewing them or in obtaining long-term extensions to them prior to expiration. Kronos’ current agreements require it to purchase certain minimum quantities of feedstock with minimum purchase commitments aggregating approximately $542 million beginning in 2025 and extending through 2026. In addition, Kronos has other long-term supply and service contracts that provide for various raw materials and services. These agreements require Kronos to purchase certain minimum quantities or services with minimum purchase commitments aggregating approximately $67 million at December 31, 2024. Kronos’ commitments under these contracts could adversely affect our financial results if Kronos significantly reduces its production and was unable to modify the contractual commitments.

Kronos’ recent acquisition of the remaining 50% interest in LPC may not generate benefits it anticipates and may otherwise affect its business and prospects.

Kronos recently completed the LPC acquisition in which it purchased the 50% ownership interest in LPC it did not previously own. If Kronos experiences unforeseen technological, operation or other difficulties in managing the integration of LPC as its wholly-owned subsidiary, it may not be able to implement the process innovations at the facility that it expects. In addition, Kronos may not be able to achieve the synergies or improve efficiency and product quality that it expects. With or without such difficulties, the integration of the LPC facility into Kronos’ operations may divert significant management time and attention from its other operations. If Kronos fails to successfully integrate LPC into its operations, or if the LPC acquisition does not provide expected synergies or sales increases, or if LPC has unexpected legal or financials liabilities, its business, financial condition, result of operations and prospects could be adversely affected.

Our assets consist primarily of investments in our operating subsidiaries and affiliate, and we are dependent upon distributions from our subsidiaries and affiliate.

The majority of our operating cash flows are generated by our operating subsidiaries and affiliate, and our ability to service liabilities and pay dividends on our common stock depends to a large extent upon the cash dividends or other distributions we receive from our subsidiaries and affiliate. Our subsidiaries and affiliate are separate and distinct legal entities and they have no obligation, contingent or otherwise, to pay cash dividends or other distributions to us. In addition, the payment of dividends or other distributions from our subsidiaries and affiliate could be subject to restrictions under applicable law, monetary transfer restrictions, currency exchange regulations in jurisdictions in which our subsidiaries and affiliate operate or any other restrictions imposed by current or future agreements to which our subsidiaries and affiliate may be a party, including debt instruments. Events beyond our control, including changes in general business and economic conditions, could adversely impact the ability of our subsidiaries and affiliate to pay dividends or make other distributions to us. If our subsidiaries and affiliate were to become unable to make sufficient cash dividends or other distributions to us, our ability to service our liabilities and to pay dividends on our common stock could be adversely affected.

In addition, a significant portion of our assets consist of ownership interests in our subsidiaries and affiliate. If we were required to liquidate our subsidiaries’ and affiliate’s securities in order to generate funds to satisfy our liabilities, we may be required to sell such securities at a time or times for less than what we believe to be the long-term value of such assets.

Financial Risk Factors

Kronos’ leverage may impair our financial condition.

Kronos has a significant amount of debt, primarily related to its 9.50% Senior Secured Notes due 2029 and its 3.75% Senior Secured Notes due 2025, its term loan from Contran, and borrowings on its global revolving credit facility (“Global Revolver”). As of December 31, 2024, Kronos’ total consolidated debt was approximately $507.4 million. Kronos’ level of debt could have important consequences to our stockholders and creditors, including:

• making it more difficult for Kronos to satisfy its obligations with respect to its liabilities;
• increasing its vulnerability to adverse general economic and industry conditions;
• requiring that a portion of its cash flows from operations be used for the payment of interest on its debt, which reduces its ability to use its cash flow to fund working capital, capital expenditures, dividends on its common stock, acquisitions or general corporate requirements;
• limiting the ability of Kronos’ subsidiaries to pay dividends to it;
• limiting Kronos’ ability to obtain additional financing to fund future working capital, capital expenditures, acquisitions or general corporate requirements;
• limiting Kronos’ flexibility in planning for, or reacting to, changes in its business and the industry in which it operates; and
• placing Kronos at a competitive disadvantage relative to other less leveraged competitors.

Indebtedness outstanding under Kronos’ Global Revolver accrues interest at variable rates. To the extent market interest rates rise, the cost of Kronos’ debt could increase, even if the amount borrowed remains the same, adversely affecting its financial condition, results of operations and cash flows.

In addition to Kronos’ indebtedness, Kronos is party to various lease and other agreements (including feedstock purchase contracts and other long-term supply and service contracts, as discussed above) pursuant to which, along with its indebtedness, Kronos is committed to pay approximately $701 million in 2025. Kronos’ ability to make payments on and refinance its debt and to fund planned capital expenditures depends on its ability to generate cash flow in the future. To some extent, this is subject to general economic, financial, competitive, legislative, regulatory and other factors that are beyond its control. In addition, Kronos’ ability to borrow funds under its Global Revolver in the future, in some instances, will depend in part on its ability to maintain specified financial ratios and satisfy certain financial covenants contained in the credit agreement governing the Global Revolver.

Kronos’ business may not generate cash flows from operating activities sufficient to enable it to pay its debts when they become due and to fund its other liquidity needs. As a result, Kronos may need to refinance all or a portion of its debt before maturity, as it has done in the past. Kronos may not be able to refinance any of its debt in a timely manner on favorable terms, if at all, in the current credit markets. Any inability to generate sufficient cash flows or to refinance its debt on favorable terms could have a material adverse effect on its financial condition and impact its ability to pay a dividend to us.

Changes in currency exchange rates and interest rates can adversely affect Kronos’ net sales, profits and cash flows.

Kronos operates its businesses in several different countries and sells its products worldwide. For example, during both 2023 and 2024, approximately 44% of Kronos’ sales volumes were sold into European markets. The majority (but not all) of Kronos’ sales from its operations outside the United States are denominated in currencies other than the United States dollar, primarily the euro, other major European currencies and the Canadian dollar. Therefore, Kronos is exposed to risks related to the need to convert currencies we receive from the sale of its products into the currencies required to pay for certain of its operating costs and expenses and other liabilities (including indebtedness), all of which could result in future losses depending on fluctuations in currency exchange rates and affect the comparability of Kronos’ results of operations between periods.

Legal, Compliance and Regulatory Risk Factors

We could incur significant costs related to legal and environmental matters.

We formerly manufactured lead pigments for use in paint. We and others have been named as defendants in various legal proceedings seeking damages for personal injury, property damage and governmental expenditures allegedly caused by the use of lead-based paints. These lawsuits seek recovery under a variety of theories, including public and private nuisance, negligent product design, negligent failure to warn, strict liability, breach of warranty, conspiracy/concert of action, aiding and abetting, enterprise liability, market share or risk contribution liability, intentional tort, fraud and misrepresentation, violations of state consumer protection statutes, supplier negligence and similar claims. The plaintiffs in these actions generally seek to impose on the defendants responsibility for lead paint abatement and health concerns associated with the use of lead-based paints, including damages for personal injury, contribution and/or indemnification for medical expenses, medical monitoring expenses and costs for educational programs. We entered into a legal settlement in one public-nuisance lead pigment case and have recognized a material liability related to the settlement. Any additional liability we might incur in the future for these matters could be material. See also Item 3 – “Legal Proceedings – Lead pigment litigation.”

Certain properties and facilities used in our former operations are the subject of litigation, administrative proceedings or investigations arising under various environmental laws. These proceedings seek cleanup costs, personal injury or property damages and/or damages for injury to natural resources. Some of these proceedings involve claims for substantial amounts. Environmental obligations are difficult to assess and estimate for numerous reasons, and we may incur costs for environmental remediation in the future in excess of amounts currently estimated. Any liability we might incur in the future could be material. See also Item 3 – “Legal Proceedings – Environmental matters and litigation.”

If some or all of Kronos’ or CompX’s intellectual property were to be declared invalid, held to be unenforceable or copied by competitors, or some or all of Kronos’ or CompX’s confidential information become known to competitors, or if Kronos’ or CompX’s competitors were to develop similar or superior intellectual property or technology, their ability to compete could be adversely impacted.

Protection of intellectual property rights, including patents, copyrights, trade secrets, confidential information, trademarks and tradenames, is important to Kronos’ and CompX’s businesses and their competitive positions. Kronos and CompX endeavor to protect their intellectual property rights in key jurisdictions in which their products are produced, sold or used and in jurisdictions into which their products are imported. However, Kronos and CompX may be unable to obtain protection for their intellectual property in key jurisdictions. Although Kronos and CompX have applied for numerous patents and trademarks throughout the world, they may have to engage in judicial enforcement in order to protect their patent rights and other proprietary rights. Kronos’ and CompX’s patents and other intellectual property rights may be challenged, invalidated, circumvented, rendered unenforceable or otherwise compromised. A failure to protect, defend or enforce intellectual property could have an adverse effect on our financial condition and results of operations. Similarly, third parties may assert claims against Kronos and Compx and their customers and distributors alleging their products infringe upon third-party intellectual property rights. In the event that any such third party prevails against Kronos or CompX on such claims, there could be an adverse effect on our financial condition and results of operations.

Although it is the practice of Kronos to enter into confidentiality agreements with its employees and third parties to protect its proprietary expertise and other trade secrets, these agreements may not provide sufficient protection for its trade secrets or proprietary know-how, or adequate remedies for breaches of such agreements may not be available in the event of an unauthorized use or disclosure of such trade secrets and know-how. Kronos also may not be able to readily detect breaches of such agreements. The failure of Kronos’ confidentiality agreements to protect its proprietary technology, know-how or trade secrets could result in a material loss of its competitive position, which could lead to significantly lower revenues, reduced profit margins or loss of market share.

CompX relies on patent, trademark and trade secret laws in the United States and similar laws in other countries to establish and maintain intellectual property rights in its technology and designs. Despite these measures, any of CompX’s intellectual property rights could be challenged, invalidated, circumvented or misappropriated. Third parties may independently discover CompX’s trade secrets and proprietary information, and in such cases CompX could not assert any trade secret rights against such parties. Further, CompX does not know if any of its pending trademark or patent applications will be approved. Costly and time-consuming litigation could be necessary to enforce and determine the scope of intellectual property rights. In addition, the laws of certain countries do not protect intellectual property rights to the same extent as the laws of the United States. Therefore, in certain jurisdictions, CompX may be unable to protect its technology and designs adequately against unauthorized third-party use, which could adversely affect its competitive position.

Third parties may claim that CompX or its customers are infringing upon their intellectual property rights. Even if CompX believes such claims are without merit, they can be time-consuming and costly to defend and distract management’s and technical staff’s attention and resources. Claims of intellectual property infringement also might require CompX to redesign affected technology, enter into costly settlement or license agreements or pay costly damage awards, or face a temporary or permanent injunction prohibiting CompX from marketing or selling certain technology. If CompX cannot or does not license the infringed technology on reasonable pricing terms or at all, or substitute similar technology from another source, our business could be adversely impacted.

If Kronos or CompX must take legal action to protect, defend or enforce intellectual property rights, any suits or proceedings could result in significant costs, including attorney’s fees and diversion of resources and management’s attention, and Kronos or CompX may not prevail in any such suits or proceedings.

Environmental, health and safety laws and regulations, particularly as they relate to Kronos, may result in increased regulatory scrutiny which could decrease demand for Kronos’ products, increase Kronos’ manufacturing and compliance costs or obligations and result in unanticipated losses which could negatively impact its financial results or limit its ability to operate its business.

From time to time, new environmental, health and safety regulations are passed or proposed in the countries in which Kronos operates or sells its products, seeking to regulate its operations or to restrict, limit or classify TiO2, or its use. Increased regulatory scrutiny could affect consumer perception of TiO2 or limit the marketability and demand for TiO2 or products containing TiO2 or increase Kronos’ manufacturing and regulatory compliance obligations and costs. Increased compliance obligations and costs or restrictions on operations, raw materials and certain TiO2 applications could negatively impact Kronos’ future financial results through increased costs of production, or reduced sales which may decrease its liquidity, operating income and results of operations, which could in turn negatively impact our investment in Kronos.

Global climate change laws and regulations could negatively impact our financial results or limit Kronos’ and CompX’s ability to operate their businesses.

CompX operates production facilities in the United States and Kronos operates production facilities in North America and Europe. Many of Kronos’ and CompX’s facilities require large amounts of energy, including electricity and natural gas, in order to conduct operations. The U.S. government and various non-U.S. governmental agencies of countries in which Kronos and CompX operate have determined the consumption of energy derived from fossil fuels is a major contributor to climate change and have adopted or are contemplating regulatory changes in response to the potential impact of climate change, including laws and regulations requiring enhanced reporting (such as the Corporate Social Responsibility Directive adopted by the European Union on November 28, 2022) as well as legislation regarding carbon emission costs, GHG emissions and renewable energy targets. International treaties or agreements may also result in increasing regulation of GHG emissions, including emissions permits and/or energy taxes or the introduction of carbon emissions trading mechanisms. To date, the existing GHG laws and regulations in effect in the various countries in which Kronos or CompX operates have not had a material adverse effect on financial results. Until the timing, scope and extent of any new or future regulation becomes known, we cannot predict the effect on Kronos’ or CompX’s business, results of operations or financial condition. However, if further GHG laws and regulations were to be enacted in one or more countries, it could negatively impact Kronos or CompX future results of operations through increased costs of production, particularly as it relates to their energy requirements or their need to obtain emissions permits. If such increased costs of production were to materialize, Kronos or CompX may be unable to pass price increases on to their customers to compensate for increased production costs, which may decrease their liquidity, operating income and results of operations. In addition, any adopted future laws and regulations focused on climate change and/or GHG emissions could negatively impact Kronos’ or CompX’s ability (or that of its customers and suppliers) to compete with companies situated in areas not subject to such laws and regulations.

General Risk Factors

Kronos’ operating as a global business presents risks associated with global and regional economic, political, and regulatory environments.

Kronos manufactures and distributes its products globally. Revenue from non-U.S. markets accounted for approximately 68%, 66%, and 66% of Kronos’ revenue for the years ended December 31, 2022, 2023 and 2024, respectively. Kronos has significant international operations which, along with its customers and suppliers, could be substantially affected by a number of risks arising from operating a multi-national business, including:

• global or regional economic downturns;
• changes in tariffs, trade barriers, and regulatory requirements, such as the enactment of tariffs on goods imported into the U.S. including, but not limited to, the recently enacted tariff on goods imported from Canada where Kronos manufactures a significant portion of the TiO2 it sells in North America. Tariffs could make Kronos’ products more expensive which would reduce demand or require it to absorb the increased costs reducing its operating margins;
• protectionist laws, policies, and business practices and nationalistic campaigns such as economic sanctions and exchange controls;
• U.S. relations with the governments of the other countries in which Kronos operates;
• terrorism, armed conflict (such as the current conflicts between Russia and Ukraine and Israel and Hamas);
• natural disasters, pandemics or other health crises, climate change, and other events beyond Kronos’ control;
• difficulties enforcing agreements or other legal rights; and
• Kronos’ effective tax rate may fluctuate based on the variability of geographic earnings and statutory rates.

TiO2 production requires significant energy input, and economic sanctions or supply disruptions resulting from armed conflict could lead to additional volatility in global energy prices and energy supply disruptions. These risks, individually or in the aggregate, could have an adverse effect on Kronos’ results of operations and financial condition.

Kronos is experiencing increasing competition from China. Chinese competition generally has lower operating costs due to less stringent regulatory and environmental compliance requirements and less expensive energy prices. China has dumped lower cost sulfate process TiO2 into the markets Kronos serves. In some cases, the TiO2 industry has been successful in getting anti-competitive duties enacted on Chinese imports such as the European duties enacted in 2024.

The U.S. federal government has recently implemented tariffs on certain foreign goods and may implement additional tariffs on foreign goods. For example, on March 4, 2025, the U.S. government implemented a 25% tariff on all imports from Mexico and Canada into the U.S. As Kronos currently manufactures a significant portion of its North American TiO2 in Canada, if sustained for an extended period of time, the 25% tariff on Kronos’ imports into the U.S. from Canada, without exclusion, will make its products manufactured in Canada and sold into the U.S. more expensive. As a result, demand for these products could be reduced, or Kronos could be required to absorb the increased costs or increase prices of such products. Such tariffs and, if enacted, any further legislation or actions taken by the U.S. government that restrict trade, such as additional tariffs, trade barriers and other protectionist or retaliatory measures taken in response, could adversely impact Kronos’ ability to sell its products in the U.S. or reduce its revenues and gross margins. These measures may also increase Kronos’ costs of Canadian feedstock imported into the U.S. and could adversely impact its gross margins or require Kronos to raise prices thereby making its products less competitive. Additional tariffs imposed by the U.S or any retaliatory or reciprocal tariffs imposed by other countries could also increase the cost of feedstock and other raw materials that go into making TiO2, the extent of which is unknown. The ultimate impact of any tariffs will depend on various factors, including the length of time tariffs are ultimately implemented and the amount, scope and nature of the tariffs.

Technology failures or cybersecurity breaches could have a material adverse effect on our operations.

Kronos and CompX rely on integrated information technology systems to manage, process and analyze data, including to facilitate the manufacture and distribution of their products to and from their facilities, receive, process and ship orders, manage the billing of and collections from their customers and manage payments to vendors. Although Kronos and CompX have systems and procedures in place to protect information technology systems, there can be no assurance that such systems and procedures would be sufficiently effective. Therefore, any of Kronos’ and CompX’s information technology systems may be susceptible to outages, disruptions or destruction from power outages, telecommunications failures, employee error, cybersecurity breaches or attacks and other similar events. This could result in a disruption of Kronos’ or CompX’s business operations, injury to people, harm to the environment or their assets, and/or the inability to access their information technology systems and could adversely affect our results of operations and financial condition. Kronos and CompX have in the past experienced, and expect to continue to experience, cyber-attacks, including phishing and other attempts to breach or gain unauthorized access to, their systems, and vulnerabilities introduced into their systems by trusted third-party vendors who have experienced cyber-attacks. To date Kronos and CompX have not suffered breaches in their systems, either directly or through a trusted third-party vendor, which have led to material losses. Due to the increase in global cybersecurity incidents it has become increasingly difficult to obtain insurance coverage on reasonable pricing terms to mitigate some risks associated with technology failures or cybersecurity breaches, and Kronos and CompX are experiencing such difficulties in obtaining insurance coverage.

Physical impacts of climate change could have a material adverse effect on Kronos’ or CompX’s costs and operations.

Climate change may increase both the frequency and severity of extreme weather conditions and natural disasters, such as hurricanes, thunderstorms, tornadoes, drought and snow or ice storms. Extreme weather conditions may increase our costs or cause damage to Kronos’ or CompX’s facilities, and any damage resulting from extreme weather may not be fully insured. Climate change has also been associated with rising sea levels and many of Kronos’ facilities are located near coastal areas or waterways where rising sea levels or flooding could disrupt its operations or adversely impact its facilities. Furthermore, periods of extended inclement weather or associated droughts or flooding may inhibit Kronos’ or CompX’s facility operations and delay or hinder shipments of products to customers. Any such events could have a material adverse effect on Kronos’ or CompX’s costs or results of operations.

We operate through our subsidiaries and affiliate and receive services through our intercorporate services agreement (ISA) with Contran (see Note 16 to our Consolidated Financial Statements). We recognize the importance of proactively assessing, identifying and managing material risks associated with cybersecurity threats. These risks include, among other things: operational disruptions, intellectual property theft, fraud, extortion, harm to employees or customers and violation of data privacy or security laws. Our cybersecurity programs are built on both operational and compliance foundations. The operational component focuses on continuous detection, prevention, measurement, analysis and response to cybersecurity alerts and incidents, and on emerging threats. The compliance component establishes oversight of our cybersecurity programs by creating risk-based controls to protect the integrity, confidentiality, accessibility and availability of company data stored, processed or transferred. Our cybersecurity program is fully integrated into our enterprise-wide risk management framework.

Kronos and CompX each have their own cybersecurity programs. Our corporate cybersecurity program is led by our chief information officer (CIO), who is responsible for developing and executing our overall information security strategy, policy, security engineering, operations and cyber threat detection and response. Our corporate information systems are owned and operated by Contran and provided to us through the ISA. Our CIO, who also serves as the Kronos CIO, reports to our and Kronos’ chief executive officers, respectively. CompX’s cybersecurity program is led by the director of information technology (IT). The director of IT reports to CompX’s vice president in charge of coordinating operational activities within CompX’s two operating business segments. Both our CIO and the director of IT have extensive information technology and program management experience and lead teams that have many years of experience with each organization. Cybersecurity risks at each company are also reviewed and tested annually through third-party assessments and internal and external information technology audits. Our, Kronos’ and CompX’s information technology teams review cybersecurity risks at least annually, integrating findings into strategic risk assessments.

We, Kronos and CompX continually enhance our cyber defense strategy with the ultimate goal of preventing cybersecurity incidents to the extent feasible, while simultaneously bolstering our system resilience in an effort to minimize the business impact should an incident occur. Third parties also play a role in our cybersecurity. We, Kronos and CompX engage reputable third-party security firms for consultation on industry best practices and regulatory standards and to conduct routine evaluations of our cybersecurity, such as through penetration testing and security audits; these evaluations include testing both the design and operational effectiveness of security controls. All employees are required to complete cybersecurity training at least once a year and have access to more frequent cybersecurity training through periodic updates. Employees in certain roles also receive additional role-based, specialized cybersecurity training.

We, Kronos and CompX each have a Cybersecurity Incident Disclosure and Controls Committee (CIDAC) which is central to the response and evaluation of cybersecurity incidents. Our CIDAC is comprised of our CIO and other senior executives including our chief executive officer, chief financial officer and general counsel. Security events and data incidents are evaluated, ranked by severity and prioritized for response and remediation. The IT teams are responsible for categorizing cybersecurity incidents, and those deemed high-risk or critical are escalated to the CIDAC for review and response coordination. Incidents are evaluated to determine materiality and for operational, financial and reputational impact. Our CIDAC, as well as the Kronos and CompX CIDAC, performs simulations and tabletop exercises at a management level to evaluate our readiness and response to cybersecurity incidents. As needed, we collaborate with external cybersecurity experts and legal advisors to help ensure a robust response strategy.

Our board of directors oversees management’s processes for identifying and mitigating risks, including cybersecurity risks, to help align our risk exposure with our strategic objectives. Senior leadership, including our chief financial officer and CIO, provides regular updates to the board of directors on our cybersecurity posture, emerging threats and our risk mitigation efforts. Our board of directors is apprised of cybersecurity incidents deemed to have significant business impact, even if they are not material to us. The board has delegated some of its primary risk oversight to board committees, including that our audit committee facilitates the board’s process of oversight of our overall risk management approach. Our full board retains oversight of cybersecurity because of its importance to us and visibility with our customers.

In the event of an incident, we follow a structured incident response playbook, which outlines clear and defined steps to be followed from incident detection to mitigation, recovery and notification, including notifying functional areas (such as legal and human resources), senior leadership, and the board, as appropriate. We also conduct post-incident reviews to identify lessons learned and implement continuous improvements.

We, Kronos and CompX face a number of cybersecurity risks. To date, such risks have not materially affected us, including our business strategy, results of operations or financial condition. While we have not experienced any major breaches, we actively monitor and mitigate cyber threats, including phishing attempts, malware and targeted attacks. Thus far all such incidents have been minor, isolated and promptly contained. For more information about the cybersecurity risks we face, see the risk factor entitled “Technology failures or cybersecurity breaches could have a material adverse effect on our operations.” in Item 1A- “Risk Factors.”

Our principal executive offices are located in an office building located at 5430 LBJ Freeway, Dallas, Texas, 75240-2620. The principal properties used in the operations of our subsidiaries and affiliates, including certain risks and uncertainties related thereto, are described in the applicable business sections of Item 1 – “Business.” We believe that our facilities are generally adequate and suitable for our respective uses.

We are involved in various legal proceedings. In addition to information that is included below, we have included certain of the information required for this Item in Note 17 to our Consolidated Financial Statements, and we are incorporating that information here by reference.

Lead pigment litigation

Our former operations included the manufacture of lead pigments for use in paint and lead-based paint. We, other former manufacturers of lead pigments for use in paint and lead-based paint (together, the “former pigment manufacturers”), and the Lead Industries Association (LIA), which discontinued business operations in 2002, have previously been named as defendants in various legal proceedings seeking damages for personal injury, property damage and governmental expenditures allegedly caused by the use of lead-based paints. Certain of these actions were filed by or on behalf of states, counties, cities or their public housing authorities and school districts, and certain others were asserted as class actions. We currently have no pending lead paint class action cases or pending lead paint cases brought by housing authorities, school districts or other government entities.

In the matter titled County of Santa Clara v. Atlantic Richfield Company, et al. (Superior Court of the State of California, County of Santa Clara, Case No. 1-00-CV-788657) on July 24, 2019, an order approving a global settlement agreement entered into among all of the plaintiffs and the three defendants remaining in the case (the Sherwin Williams Company, ConAgra Grocery Products and us) was entered by the court and the case was dismissed with prejudice. The global settlement agreement provides that an aggregate $305 million will be paid collectively by the three co-defendants in full satisfaction of all claims resulting in a dismissal of the case with prejudice and the resolution of (i) all pending and future claims by the plaintiffs in the case, and (ii) all potential claims for contribution or indemnity between us and our co-defendants in respect to the case. In the agreement, we expressly deny any and all liability and the dismissal of the case with prejudice was entered by the court without a final judgment of liability entered against us. The settlement agreement fully concludes this matter.

Under the terms of the global settlement agreement, each defendant must pay an aggregate $101.7 million to the plaintiffs as follows: $25.0 million within sixty days of the court’s approval of the settlement and dismissal of the case, and the remaining $76.7 million in six annual installments beginning on the first anniversary of the initial payment ($12.0 million for the first five installments and $16.7 million for the sixth installment). Our sixth installment due in September 2025 will be made with funds already on deposit at the court, which is included in current restricted cash on our Consolidated Balance Sheets, that are committed to the settlement, including all accrued interest at the date of payment, with any remaining balance to be paid by us (and any amounts on deposit in excess of the final payment would be returned to us). Pursuant to the settlement agreement, we placed an additional $9.0 million into an escrow account which was previously included in noncurrent restricted cash on our Consolidated Balance Sheets. Following our fifth $12.0 million installment made in September 2024, these funds became available for use and were reclassified as cash equivalents on our Consolidated Balance Sheet.

For financial reporting purposes, using a discount rate of 1.9% per annum, we discounted the aggregate $101.7 million settlement to the estimated net present value of $96.3 million. We made the initial $25.0 million payment in September 2019 and five annual installment payments of $12.0 million beginning in September 2020 and each September thereafter through 2024. We recognized an aggregate accretion expense of $.9 million, $.7 million and $.5 million in 2022, 2023 and 2024, respectively.

In January 2024, NL was served with a third-party complaint in a matter titled Arrioena Beal v. Hattie Mitchell, et al. (Circuit Court of Milwaukee County, Wisconsin, Case No. 21-cv-3276). The plaintiff in this case sued her former landlords and several former manufacturers of lead paint for injuries allegedly attributable to lead paint, but did not sue NL. Several of the former lead paint manufacturer defendants later filed a third-party complaint against NL, seeking contribution for any damages they may ultimately have to pay to the plaintiff. We believe we have substantial defenses to these claims under Wisconsin law and intend to defend ourselves vigorously.

New cases may continue to be filed against us. We do not know if NL will incur liability in the future in respect of any of the pending or possible litigation in view of the inherent uncertainties involved in court and jury rulings. In the future, if new information regarding such matters becomes available to us (such as a final, non-appealable adverse verdict against us or otherwise ultimately being found liable with respect to such matters), at that time we would consider such information in evaluating any remaining cases then-pending against us as to whether it might then have become probable we have incurred liability with respect to these matters, and whether such liability, if any, could have become reasonably estimable. The resolution of any of these cases could result in the recognition of a loss contingency accrual that could have a material adverse impact on our net income for the interim or annual period during which such liability is recognized and a material adverse impact on our consolidated financial condition and liquidity.

Environmental matters and litigation

Certain properties and facilities used in our former operations, including divested primary and secondary lead smelters and former mining locations, are the subject of civil litigation, administrative proceedings or investigations arising under federal and state environmental laws and common law. Additionally, in connection with past operating practices, we are currently involved as a defendant, potentially responsible party (“PRP”) or both, pursuant to the Comprehensive Environmental Response, Compensation and Liability Act, as amended by the Superfund Amendments and Reauthorization Act (“CERCLA”), and similar state laws in various governmental and private actions associated with waste disposal sites, mining locations, and facilities that we or our predecessors, our subsidiaries or their predecessors currently or previously owned, operated or used, certain of which are on the United States Environmental Protection Agency’s (“EPA”) Superfund National Priorities List or similar state lists. These proceedings seek cleanup costs, damages for personal injury or property damage and/or damages for injury to natural resources. Certain of these proceedings involve claims for substantial amounts. Although we may be jointly and severally liable for these costs, in most cases we are only one of a number of PRPs who may also be jointly and severally liable, and among whom costs may be shared or allocated.

In addition, we are occasionally named as a party in a number of personal injury lawsuits filed in various jurisdictions alleging claims related to environmental conditions alleged to have resulted from our operations.

Obligations associated with environmental remediation and related matters are difficult to assess and estimate for numerous reasons including the:

• complexity and differing interpretations of governmental regulations,
• number of PRPs and their ability or willingness to fund such allocation of costs,
• financial capabilities of the PRPs and the allocation of costs among them,
• solvency of other PRPs,
• multiplicity of possible solutions,
• number of years of investigatory, remedial and monitoring activity required,
• uncertainty over the extent, if any, to which our former operations might have contributed to the conditions allegedly giving rise to such personal injury, property damage, natural resource and related claims, and
• number of years between former operations and notice of claims and lack of information and documents about the former operations.

In addition, the imposition of more stringent standards or requirements under environmental laws or regulations, new developments or changes regarding site cleanup costs or the allocation of costs among PRPs, solvency of other PRPs, the results of future testing and analysis undertaken with respect to certain sites or a determination that we are potentially responsible for the release of hazardous substances at other sites, could cause our expenditures to exceed our current estimates. Actual costs could exceed accrued amounts or the upper end of the range for sites for which estimates have been made, and costs may be incurred for sites where no estimates presently can be made. Further, additional environmental and related matters may arise in the future. If we were to incur any future liability, this could have a material adverse effect on our Consolidated Financial Statements, results of operations and liquidity.

We record liabilities related to environmental remediation and related matters (including costs associated with damages for personal injury or property damage and/or damages for injury to natural resources) when estimated future expenditures are probable and reasonably estimable. We adjust such accruals as further information becomes available to us or as circumstances change. Unless the amounts and timing of such estimated future expenditures are fixed and reasonably determinable, we generally do not discount estimated future expenditures to their present value due to the uncertainty of the timing of the payout. We recognize recoveries of costs from other parties, if any, as assets when their receipt is deemed probable.

We do not know and cannot estimate the exact time frame over which we will make payments for our accrued environmental and related costs. The timing of payments depends upon a number of factors, including but not limited to the timing of the actual remediation process; which in turn depends on factors outside of our control. At each balance sheet date, we estimate the amount of our accrued environmental and related costs which we expect to pay within the next twelve months, and we classify this estimate as a current liability. We classify the remaining accrued environmental costs as a noncurrent liability.

On a quarterly basis, we evaluate the potential range of our liability for environmental remediation and related costs at sites where we have been named as a PRP or defendant, including sites for which our wholly-owned environmental management subsidiary, NL Environmental Management Services, Inc., (“EMS”), has contractually assumed our obligations. At December 31, 2024, we had accrued approximately $69 million related to approximately 30 sites associated with remediation and related matters we believe are at the present time and/or in their current phase reasonably estimable. Excluding the $56.1 million environmental remediation settlement payment made in the first quarter of 2025 (as discussed below), the upper end of the range of reasonably possible costs to us for remediation and related matters for which we believe it is possible to estimate costs is approximately $38 million, including amounts currently accrued. These accruals have not been discounted to present value.

We believe it is not reasonably possible to estimate the range of costs for certain sites. At December 31, 2024, there were approximately five sites for which we are not currently able to reasonably estimate a range of costs. For these sites, generally the investigation is in the early stages, and we are unable to determine whether or not we actually had any association with the site, the nature of our responsibility, if any, for the contamination at the site, if any, and the extent of contamination at and cost to remediate the site. The timing and availability of information on these sites is dependent on events outside of our control, such as when the party alleging liability provides information to us. At certain of these previously inactive sites, we have received general and special notices of liability from the EPA and/or state agencies alleging that we, sometimes with other PRPs, are liable for past and future costs of remediating environmental contamination allegedly caused by former operations. These notifications may assert that we, along with any other alleged PRPs, are liable for past and/or future clean-up costs. As further information becomes available to us for any of these sites, which would allow us to estimate a range of costs, we would at that time adjust our accruals. Any such adjustment could result in the recognition of an accrual that would have a material effect on our Consolidated Financial Statements, results of operations and liquidity.

In June 2008, we received a Directive and Notice to Insurers from the New Jersey Department of Environmental Protection (“NJDEP”) regarding the Margaret’s Creek site in Old Bridge Township, New Jersey. NJDEP alleged that a waste hauler transported waste from one of our former facilities for disposal at the site in the early 1970s. NJDEP referred the site to the EPA, and in November 2009, the EPA added the site to the National Priorities List under the name Raritan Bay Slag Site (“RBS Site”). In 2012, EPA notified NL of its potential liability at this site. In June 2013, NL filed a contribution suit under CERCLA and the New Jersey Spill Act titled NL Industries, Inc. v. Old Bridge Township, et al. (United States District Court for the District of New Jersey, Civil Action No. 3:13-cv-03493-MAS-TJB) against the current owner, Old Bridge Township, several federal and state entities, and a number of private companies.

On February 10, 2025, the United States District Court for the District of New Jersey entered an order approving a consent decree relating to the RBS Site in Middlesex County, New Jersey. The consent decree requires the United States Army Corps of Engineers (and other federal agencies), the State of New Jersey, the Township of Old Bridge, NL, and twenty-two other private companies to pay a total of $151.1 million, plus interest, to resolve all federal and state law claims for past and future response costs under CERCLA and the New Jersey Spill Act, including natural resource damages, contribution, and indemnification, relating to the RBS Site. The consent decree is a global settlement of all such claims relating to the RBS Site and resolves a lawsuit captioned United States of America, et al. v. NL Industries, Inc., et al. (United States District Court for the District of New Jersey, Civil Action No. 3:24-cv-08946) as well as all claims asserted by NL and the other settling parties in NL’s previously filed contribution lawsuit, NL Industries, Inc. v. Old Bridge Township, et al., discussed above.

Under the terms of the consent decree, in the first quarter of 2025 we paid $56.1 million, plus $.5 million interest, toward the global settlement and received approximately $9.6 million from the other private companies participating in the settlement. We recognized aggregate income of approximately $31.4 million in 2024 related to the adjustment of our environmental accrual related to this matter and the recording of a $9.6 million receivable for the funds received in the first quarter of 2025 from the other private companies participating in the settlement. See Note 3 to the Consolidated Financial Statements.

In August 2009, we were served with a complaint in Raritan Baykeeper, Inc. d/b/a NY/NJ Baykeeper et al. v. NL Industries, Inc. et al. (United States District Court, District of New Jersey, Case No. 3:09-cv-04117). This is a citizen’s suit filed by two local environmental groups pursuant to the Resource Conservation and Recovery Act and the Clean Water Act against NL, current owners, developers and state and local government entities. The complaint alleges that hazardous substances were and continue to be discharged from our former Sayreville, New Jersey property into the sediments of the adjacent Raritan River. The former Sayreville site is currently being remediated by owner/developer parties under the oversight of the NJDEP. The plaintiffs seek a declaratory judgment, injunctive relief, imposition of civil penalties and an award of costs. In June 2022, NL received a letter from the NJDEP informing NL that remediation of contaminated sites upriver of the former Sayreville site had progressed to the point that it was now appropriate for NL to resume investigating the sediments adjacent to the Sayreville site. NL has been diligently conducting that investigation in compliance with NJDEP regulations. The lawsuit remains pending. NL continues to deny liability and will defend vigorously against all claims.

In 2011, we were served in ASARCO LLC v. NL Industries, Inc., et al. (United States District Court, Western District of Missouri, Case No. 4:11-cv-00138-DGK) and ASARCO LLC v. NL Industries, Inc., et al. (United States District Court, Eastern District of Missouri, Case No. 4:11-cv-00864). Both cases are CERCLA contribution actions brought against several defendants to recover a portion of the amount the plaintiff paid in settlement with the U.S. Government during its Chapter 11 bankruptcy. The court in each case entered indefinite stays of the litigation in 2013 and 2015, which remain in place.

In July 2012, we were served in EPEC Polymers, Inc., v. NL Industries, Inc., (United States District Court for the District of New Jersey, Case 3:12-cv-03842-PGS-TJB). The plaintiff, a landowner of property located across the Raritan River from our former Sayreville, New Jersey operation, claims that contaminants from NL’s former Sayreville operation came to be located on its land. The complaint seeks compensatory and punitive damages and alleges, among other things, trespass, private nuisance, negligence, strict liability, and claims under CERCLA and the New Jersey Spill Act. We have denied liability and will defend vigorously against all claims.

In September 2013, EPA issued to NL and 34 other PRPs general notice of potential liability and a demand for payment of past costs and performance of a Remedial Design for the Gowanus Canal Superfund Site in Brooklyn, New York. In March 2014, EPA issued a unilateral administrative order (“UAO”) to NL and approximately 27 other PRPs for performance of the Remedial Design at the site. EPA contends that NL is liable as the alleged successor to the Doehler Die Casting Company, and therefore responsible for any potential contamination at the site resulting from Doehler’s ownership/operation of a warehouse and a die casting plant it owned 90 years ago. In April 2019, the EPA issued a second UAO to NL and approximately 27 other PRPs for performance of certain work related to the Remedial Design at the site. In October 2024, we were served in Brooklyn Union Gas Co. v. Consolidated Edison Co*. of New York, et al.* (United States District Court for the Eastern District of New York, Case No. 1:24-cv-06993). This complaint asserts claims under CERCLA and New York law against NL and a number of other private parties, federal and state agencies, and agencies of the City of New York. The plaintiff, a former gas manufacturer, seeks to recover a portion of investigation and remediation costs it allegedly incurred to address contamination at the Gowanus Canal Superfund Site. NL has denied liability and will defend vigorously against all claims.

In January 2020, we were sued in Atlantic Richfield, Co. v. NL Industries, Inc., (United States District Court for the District of Colorado, Case 1:20-cv-00234). This is a CERCLA cost recovery action brought by a past owner and operator of certain mining properties located in Rico, Colorado. In 2023, the trial court granted partial summary judgment for NL based on the statute of limitations and the plaintiff appealed that decision to the Court of Appeals for the Tenth Circuit. In January 2025, the Court of Appeals reversed the trial court’s grant of partial summary judgment and returned the matter to the trial court. We continue to deny liability and will defend vigorously against all claims.

In December 2020, NL and several other defendants were sued in California Department of Toxic Substances v. NL Industries, Inc., (United States District Court for the Central District of California, Case 2:20-cv-11293). This complaint by a California state agency asserts claims under CERCLA, a state environmental statute, and the common law relating to lead contamination allegedly connected to a secondary lead smelter located in Vernon, California. In October 2022, the trial court issued an order finding that NL and the other defendants are not liable under CERCLA for lead contamination in residential neighborhoods surrounding, but at a distance from, the former secondary lead smelter. In August 2023, the trial court issued orders finding that NL and several other defendants are jointly liable for contamination on areas where operations were previously conducted, but are not liable for contamination outside those former operating areas. Neither the amount of damages owed, nor any party’s allocated share of such damages, has yet been determined. We have denied liability and will continue to defend vigorously against all claims.

In May 2024, we were served in Philip Palmeri v. NL Industries, Inc. (Supreme Court of Niagara County, New York, Case No. E183238). In this lawsuit, the plaintiff asserts that radioactive material allegedly originating at a former NL facility in Niagara Falls, New York, caused the wrongful death of plaintiff’s spouse and diminished the value of plaintiff’s residential property located in Lewiston, New York. The complaint alleges that NL is liable under theories of strict liability, negligence, private nuisance, and trespass. NL has denied liability and will defend vigorously against all claims.

Other litigation

We have been named as a defendant in various lawsuits in several jurisdictions, alleging personal injuries as a result of occupational exposure primarily to products manufactured by our former operations containing asbestos, silica and/or mixed dust. In addition, some plaintiffs allege exposure to asbestos from working in various facilities previously owned and/or operated by us. There are 115 of these types of cases pending, involving a total of approximately 589 plaintiffs. In addition, the claims of approximately 8,715 plaintiffs have been administratively dismissed or placed on the inactive docket in Ohio state courts. We do not expect these claims will be re-opened unless the plaintiffs meet the courts’ medical criteria for asbestos-related claims. We have not accrued any amounts for this litigation because of the uncertainty of liability and inability to reasonably estimate the liability, if any. To date, we have not been adjudicated liable in any of these matters.

Based on information available to us, including:

• facts concerning historical operations,
• the rate of new claims,
• the number of claims from which we have been dismissed, and
• our prior experience in the defense of these matters,

we believe the range of reasonably possible outcomes of these matters will be consistent with our historical costs (which are not material). Furthermore, we do not expect any reasonably possible outcome would involve amounts material to our consolidated financial position, results of operations or liquidity. We have sought and will continue to vigorously seek, dismissal and/or a finding of no liability from each claim. In addition, from time to time, we have received notices regarding asbestos or silica claims purporting to be brought against former subsidiaries, including notices provided to insurers with which we have entered into settlements extinguishing certain insurance policies. These insurers may seek indemnification from us.

In addition to the matters described above, we and our affiliates are also involved in various other environmental, contractual, product liability, patent (or intellectual property), employment and other claims and disputes incidental to present and former businesses. In certain cases, we have insurance coverage for these items, although we do not expect additional material insurance coverage for environmental matters. We currently believe that the disposition of all of these various other claims and disputes (including asbestos-related claims), individually or in the aggregate, should not have a material adverse effect on our consolidated financial position, results of operations or liquidity beyond the accruals already provided.

Insurance coverage claims

We are involved in certain legal proceedings with a number of our former insurance carriers regarding the nature and extent of the carriers’ obligations to us under insurance policies with respect to certain lead pigment and asbestos lawsuits. The issue of whether insurance coverage for defense costs or indemnity or both will be found to exist for our lead pigment and asbestos litigation depends upon a variety of factors and we cannot assure you that such insurance coverage will be available.

We have agreements with certain of our former insurance carriers pursuant to which the carriers reimburse us for a portion of our future lead pigment litigation defense costs, and one such carrier reimburses us for a portion of our future asbestos litigation defense costs. We are not able to determine how much we will ultimately recover from these carriers for defense costs incurred by us because of certain issues that arise regarding which defense costs qualify for reimbursement. While we continue to seek additional insurance recoveries, we do not know if we will be successful in obtaining reimbursement for either defense costs or indemnity. Accordingly, we recognize insurance recoveries in income only when receipt of the recovery is probable and we are able to reasonably estimate the amount of the recovery.

In January 2014, we were served with a complaint in Certain Underwriters at Lloyds, London, et al v. NL Industries, Inc. (Supreme Court of the State of New York, County of New York, Index No. 14/650103). The plaintiff, a former insurance carrier of ours, is seeking a declaratory judgment of its obligations to us under insurance policies issued to us by the plaintiff with respect to certain lead pigment lawsuits. Other insurers have been added as parties to the case and have also sought a declaratory judgment regarding their obligations under certain insurance policies. NL has filed a counterclaim seeking a declaratory judgment that all of the insurers are obligated to provide NL with certain coverage and seeking damages for breach of contract. In December 2020, the trial court denied the insurers’ motion for summary judgment, finding that the arguments raised by the insurers did not bar NL from coverage under the relevant policies. We intend to defend NL’s rights and prosecute NL’s claims in this action vigorously.

We have settled insurance coverage claims concerning environmental claims with certain of our principal former insurance carriers. We do not expect further material settlements relating to environmental remediation coverage.

Litigation – CompX

In 2024, CompX was served with four lawsuits by public water companies in South Carolina that seek recovery of future costs to remove perfluoroalkyl and polyfluoroalkyl substances (known as “PFAS”) from their water supplies. The lawsuits have been consolidated with other PFAS cases before a single judge in Spartanburg, South Carolina and were subsequently removed to federal court. The defendants in the lawsuits include the manufacturers of PFAS products, as well as companies that allegedly used PFAS-containing products in their manufacturing operations. The four lawsuits naming CompX allege that CompX was one of many companies that used products containing PFAS in its manufacturing operations, and that such operations have collectively impacted drinking water supplies used by the water companies. The plaintiffs do not allege that CompX has failed to comply with, or has violated, any environmental regulation, permit or statute. The plaintiffs instead assert claims under common law theories of negligence, nuisance, trespass, failure to warn, and unfair trade practices. CompX intends to deny liability and will defend vigorously against all claims.

RESULTS OF OPERATIONS

Business overview

We are primarily a holding company. We operate in the component products industry through our majority-owned subsidiary, CompX International Inc. We also own a noncontrolling interest in Kronos Worldwide, Inc. Both CompX (NYSE American: CIX) and Kronos (NYSE: KRO) file periodic reports with the SEC.

CompX is a leading manufacturer of engineered components utilized in a variety of applications and industries. Through its Security Products operations, CompX manufactures mechanical and electronic cabinet locks and other locking mechanisms used in postal, recreational transportation, office and institutional furniture, cabinetry, tool storage and healthcare applications. CompX also manufactures wake enhancement systems, stainless steel exhaust systems, gauges, throttle controls, trim tabs and related hardware and accessories for the recreational marine and other industries through its Marine Components operations.

We account for our 31% non-controlling interest in Kronos by the equity method. Kronos is a leading global producer and marketer of value-added titanium dioxide pigments. TiO2 is used for a variety of manufacturing applications including coatings, plastics, paper and other industrial products.

Net income overview

Our net income attributable to NL stockholders was $67.2 million, or $1.38 per share, in 2024 compared to a net loss of $2.3 million, or $.05 per share, in 2023 and net income of $33.8 million, or $.69 per share, in 2022.

As more fully described below, the increase in our earnings attributable to NL stockholders from 2023 to 2024 is primarily due to the net effects of:

• equity in earnings from Kronos in 2024 of $26.4 million compared to equity in losses of $15.0 million in 2023;
• aggregate income of $31.4 million in 2024 related to the settlement of a liability for an environmental remediation site;
• an unrealized gain in the relative value of marketable equity securities of $9.8 million in 2024 compared to an unrealized loss of $8.1 million in 2023;
• lower CompX segment profit of $17.0 million in 2024 compared to $25.4 million in 2023;
• a non-cash loss on the termination of our U.K. pension plan of $4.9 million in 2023;
• higher interest and dividend income of $11.0 million in 2024 compared to $9.6 million in 2023; and
• higher insurance recoveries of $1.4 million in 2024 compared to $.5 million in 2023.

Our 2024 net income per share attributable to NL includes:

• aggregate income of $.51 per share, net of tax in the fourth quarter of 2024 related to the settlement of a liability for an environmental remediation site;
• income of $.25 per share, net of tax, due to Kronos’ recognition of a non-cash gain resulting from the remeasurement of its investment in the TiO2 manufacturing joint venture;
• a loss of $.08 per share, net of tax, due to Kronos’ recognition of a non-cash deferred income tax expense related to final tax regulations on the treatment of certain currency translation gains and losses recognized in the fourth quarter;
• a loss of $.04 per share, net of tax, due to Kronos’ recognition of a non-cash deferred income tax expense related to the recognition of a deferred income tax asset valuation allowance related to its Belgian net deferred tax assets recognized in the fourth quarter, and
• income of $.02 per share, net of tax, related to insurance recoveries; and
• a loss of $.01 per share due to Kronos’ recognition of an aggregate charge related to a write-off of deferred financing costs.

Our 2023 net loss per share attributable to NL stockholders includes:

• a loss of $.08 per share, net of tax, due to the termination of our U.K. pension plan recognized in the second quarter,
• a loss of $.02 per share, net of tax, due to Kronos’ recognition, primarily in the fourth quarter, of restructuring costs related to workforce reductions,
• income of $.01 per share, net of tax, due to Kronos’ recognition in the first, second and third quarters of a pre-tax insurance settlement gain related to a business interruption insurance claim arising from Hurricane Laura in 2020, and
• a loss of $.01 per share, net of tax, due to Kronos’ recognition in the fourth quarter of a fixed asset impairment related to the write-off of certain costs resulting from a capital project termination.

As more fully described below, the decrease in our earnings attributable to NL stockholders from 2022 to 2023 is primarily due to the net effects of:

• equity in losses from Kronos in 2023 of $15.0 million compared to equity in earnings of $31.9 million in 2022,
• higher interest and dividend income of $9.6 million in 2023 compared to $3.8 million in 2022, and
• a non-cash loss on the termination of our U.K. pension plan of $4.9 million in 2023.

Our 2023 net loss per share attributable to NL stockholders includes:

• a loss of $.08 per share, net of tax, due to the termination of our U.K. pension plan recognized in the second quarter,
• a loss of $.02 per share, net of tax, due to Kronos’ recognition, primarily in the fourth quarter, of restructuring costs related to workforce reductions,
• income of $.01 per share, net of tax, due to Kronos’ recognition in the first, second and third quarters of a pre-tax insurance settlement gain related to a business interruption insurance claim arising from Hurricane Laura in 2020, and
• a loss of $.01 per share, net of tax, due to Kronos’ recognition in the fourth quarter of a fixed asset impairment related to the write-off of certain costs resulting from a capital project termination.

Our 2022 net income per share attributable to NL stockholders includes income of $.01 per share, recognized in the third quarter, related to Kronos’ business interruption insurance claim arising from Hurricane Laura in 2020.

Outlook

Excluding any potential effects from changes in the relative value of marketable equity securities, we currently expect our net income attributable to NL stockholders in 2025 to be lower than 2024 primarily due to income related to the settlement of a liability for an environmental remediation site recognized in the fourth quarter of 2024 partially offset by higher expected CompX segment profit. See also Item 3 – “Legal Proceedings – Environmental matters and litigation” and Note 17 to our Consolidated Financial Statements.

Income from operations

The following table shows the components of our income from operations.

(Dollars in millions)

The following table shows the components of our income (loss) before income taxes exclusive of our income from operations.

(Dollars in millions)

n.m. not meaningful

CompX International Inc.

(Dollars in millions)

(1) We use segment profit to assess the performance of CompX. Segment profit is defined as gross margin less selling, general and administrative expenses directly attributable to CompX’s operations.

Net sales – CompX’s net sales decreased $15.4 million in 2024 compared to 2023 due to lower Marine Components sales to the towboat market and lower Security Products sales to the government security market as a result of sales related to a pilot project that shipped in the third and fourth quarters of 2023 and for which there were no related sales in 2024.

CompX’s net sales decreased approximately $5.3 million in 2023 compared to 2022 due to lower Marine Components sales primarily to the towboat market, partially offset by higher Security Products sales largely in the fourth quarter of 2023.

Cost of sales and gross margin – CompX’s cost of sales decreased in 2024 compared to 2023 primarily due to the effects of lower sales at both Security Products and Marine Components partially offset by higher production costs across both reporting units. As a result, CompX’s cost of sales as a percentage of net sales increased over the same period. CompX’s gross margin as a percentage of sales decreased in 2024 compared to 2023 primarily due to the factors affecting cost of sales and decreased coverage of fixed costs due to lower sales.

CompX’s cost of sales decreased in 2023 compared to 2022 primarily due to the effects of lower production costs at both Security Products and Marine Components as well as lower Marine Components sales. CompX’s gross margin as a percentage of sales increased over the same period primarily due to the factors affecting cost of sales.

Selling, general and administrative expenses – CompX’s selling, general and administrative expenses consist primarily of personnel costs, sales commissions and advertising expenses directly related to product sales and administrative costs relating to CompX’s businesses and its corporate management activities, as well as gains and losses on property and equipment. CompX’s selling, general and administrative expenses increased $.5 million in 2024 compared to 2023 predominantly due to higher employee salary and benefit costs at Security Products. As a percentage of sales, CompX’s selling, general and administrative expenses increased in 2024 compared to 2023 primarily due to increased selling, general and administrative expenses and decreased coverage of selling, general and administrative expenses on lower sales.

CompX’s selling, general and administrative expenses increased in 2023 compared to 2022 predominantly due to higher salary and benefit costs at Security Products which increased by $.6 million. As a percentage of sales, CompX’s selling, general and administrative expenses increased in 2023 compared to 2022 primarily due to the effect of the increased selling, general and administrative expenses on lower sales.

Segment profit – As a percentage of net sales, CompX’s segment profit decreased in 2024 compared to 2023 and increased in 2023 compared to 2022. CompX’s segment profit margins were primarily impacted by the factors impacting net sales, cost of sales, gross margin and selling, general and administrative expenses discussed above.

General – CompX’s profitability primarily depends on its ability to utilize its production capacity effectively, which is affected by, among other things, the demand for its products and its ability to control its manufacturing costs, primarily comprised of labor costs and materials. The materials used in CompX’s products consist of purchased components and raw materials some of which are subject to fluctuations in the commodity markets such as zinc, brass, aluminum and stainless steel. Total material costs represented approximately 46% of CompX’s cost of sales in 2024, with commodity-related raw materials representing approximately 13% of its cost of sales. CompX’s raw material prices were generally stable through the first half of 2024. Beginning in the latter half of the third quarter CompX began to experience moderate increases in certain raw material costs, particularly brass. The zinc market was volatile in 2024, but CompX was successful in making strategic spot buys to keep its costs consistent with 2023. Prices for aluminum and stainless steel, which are the primary raw materials used for the manufacture of CompX’s marine components (including marine exhaust headers and pipes, wake enhancement systems, throttles and trim tabs), were relatively stable in 2024 because it took advantage of volume purchase opportunities during the year. In most cases, commodity raw materials CompX purchases include processing and conversion costs, such as alloying, extrusion and rolling, which remain elevated due to costs of labor, transportation and energy. Processing and conversion costs are not expected to decrease and may negate the benefit of softening commodity prices on CompX’s purchases. Based on current economic conditions, CompX expects the prices for zinc, brass, aluminum, stainless steel and other manufacturing materials in 2025 to be relatively stable, although governmental actions such as tariffs may impact markets.

CompX occasionally enters into short-term commodity-related raw material supply arrangements to mitigate the impact of future increases in commodity related raw material costs. See Item 1 – “Business- Raw Materials.”

Results by reporting unit

The key performance indicator for CompX’s reporting units is the level of their reporting unit profit (see discussion below).

(Dollars in millions)

(2) Reporting unit profit includes reporting unit sales less cost of sales and operating costs and expenses directly attributable to the reporting unit. Interunit sales are not material.

Security Products – Security Products net sales decreased 5% to $115.2 million in 2024 compared to $121.2 million in 2023 primarily due to lower sales to the government security market as a result of sales related to a pilot project for a government security customer that shipped in the third and fourth quarters of 2023 and for which there were no related sales in 2024. Relative to prior year, sales were $8.3 million lower to the government security market, $2.0 million lower to the transportation market and $.9 million lower to distributors, partially offset by $4.1 million higher sales to the healthcare market and $.7 million higher sales to the tool storage market. Gross margin as a percentage of net sales for 2024 decreased as compared to 2023 primarily due to lower sales, a less favorable customer and product mix, higher employee related costs (primarily increased medical costs), higher materials costs (primarily brass and electronics) in the latter half of the year and decreased coverage of fixed costs due to lower sales. Security Products reporting unit profit margin decreased for 2024 compared to 2023 primarily due to the factors impacting gross margin, as well as decreased coverage of operating costs and expenses from lower sales and increased operating costs and expenses, including higher employee salaries and benefit costs of $.5 million, primarily in the first half of the year.

Security Products net sales increased 6% to $121.2 million in 2023 compared to $114.5 million in 2022 primarily due to higher sales related to a pilot project for a government security customer. Relative to prior year, sales were $8.3 million higher to the government security market and $1.5 million higher to distributors, partially offset by $1.7 million lower sales to the office furniture market and $.7 million lower sales to the gas station security market. Gross margin as a percentage of net sales for 2023 increased as compared to 2022 primarily due to lower production costs (including lower material, overtime and shipping costs) and increased coverage of fixed costs on higher sales, primarily in the fourth quarter. Reporting unit profit margin increased for 2023 compared to 2022 primarily due to the factors impacting gross margin, as well as increased coverage of operating costs and expenses from higher sales, partially offset by increased operating costs and expenses, including higher employee salaries and benefit costs of $.6 million.

(Dollars in millions)

Marine Components – Marine Components net sales decreased 23% in 2024 as compared to 2023 primarily due to $8.7 million lower sales to the towboat market through the first three quarters of 2024, partially offset by higher sales in the fourth quarter of 2024, including $1.1 million higher sales to the towboat market and $1.0 million higher sales to the government market. Relative to the full year of 2023, sales were $7.6 million lower to the towboat market (primarily to original equipment boat manufacturers), $1.4 million lower to the industrial market and $.6 million lower to each the engine builder market and distributors, partially offset by $1.4 million higher sales to the government market. Gross margin as a percentage of sales decreased in 2024 compared to 2023 primarily due to higher cost inventory produced during the fourth quarter of 2023 and sold in the first quarter of 2024 and decreased coverage of fixed costs as a result of lower sales, partially offset by a more favorable customer and product mix, lower employee salaries and benefits of approximately $1.8 million primarily related to headcount reductions and decreased labor costs of $1.2 million due to lower production volumes. Reporting unit profit as a percentage of net sales decreased in 2024 compared to 2023 due to the factors impacting gross margin, as well as decreased coverage of operating costs and expenses on lower sales, partially offset by reduced operating costs and expenses, including lower employee related expenses of $.2 million.

Marine Components net sales decreased 23% in 2023 as compared to 2022. Relative to prior year, sales were $12.8 million lower to the towboat market (primarily to original equipment boat manufacturers) and $2.0 million lower to the engine builder market, partially offset by $1.2 million higher industrial sales and $.8 million higher sales to the center console boat market. Gross margin as a percentage of sales increased in 2023 compared to 2022 primarily due to lower raw material costs (primarily stainless steel and aluminum), lower supplies costs driven by lower volume, lower shipping costs and lower labor costs from reduced employee overtime due to lower sales volumes, partially offset by decreased coverage of fixed costs as a result of lower sales. Reporting unit profit as a percentage of net sales decreased slightly in 2023 compared to 2022 primarily due to the factors impacting gross margin, as well as decreased coverage of operating costs and expenses from lower sales.

Outlook – As noted above, in the second half of 2023 CompX’s Security Products reporting unit had significant sales related to a pilot project for a government security customer. Excluding these sales in 2023, Security Products sales would have increased in 2024 as compared to 2023 due to increased sales across a variety of markets, particularly increased sales of mechanical locks to the government security market. At CompX’s Marine Components reporting unit, the decline in sales to the towboat market as a result of the contraction in the recreational marine industry that began in the second quarter of 2023 continued through the third quarter of 2024. Marine Components net sales increased in the fourth quarter of 2024 compared to the fourth quarter of 2023 as a result of stabilizing demand in the towboat market as well as increased sales to the government market. Raw material prices remained relatively stable through the first half of the year; however, beginning in the third quarter of 2024 CompX experienced price increases in certain commodity raw materials, primarily brass and electronic components at Security Products.

CompX expects Security Products net sales in 2025 to improve modestly over 2024, and it expects gross margin and reporting unit profit percentages in 2025 to be slightly above 2024 due to pricing improvements on the Security Products product mix. CompX expects Marine Components net sales to increase in 2025 due to higher expected sales to the government and industrial markets. CompX believes the recreational marine market has stabilized, and it expects Marine Components sales to the towboat market in 2025 will be comparable to 2024. Overall CompX expects Marine Components to have improved gross margins and reporting unit profit percentages in 2025 compared to 2024 due to higher expected sales volumes. During 2024 CompX was aggressive in aligning its production capabilities and inventories to demand levels. In 2025, CompX will continue to monitor current and anticipated near-term customer demand levels to ensure its production capabilities and inventories are aligned accordingly.

CompX’s expectations for its operations and the markets it serves are based on a number of factors outside its control. Currently, CompX’s supply chains are stable and transportation and logistical delays are minimal. CompX has in the past experienced global and domestic supply chain challenges, and any future impacts on its operations will depend on, among other things, any future disruption in its operations or its suppliers’ operations, the effect of tariffs, and the impact of economic conditions and geopolitical events on demand for its products or its customers’ and suppliers’ operations, all of which remain uncertain and cannot be predicted.

General corporate items, interest and dividend income, interest expense, provision for income taxes, noncontrolling interest and related party transactions

Insurance recoveries – We have agreements with certain insurance carriers pursuant to which the carriers reimburse us for a portion of our past lead pigment and asbestos litigation defense costs. Insurance recoveries include amounts we received from these insurance carriers.

The agreements with certain of our insurance carriers also include reimbursement for a portion of our future litigation defense costs. We are not able to determine how much we will ultimately recover from these carriers for defense costs incurred by us because of certain issues that arise regarding which defense costs qualify for reimbursement. Accordingly, these insurance recoveries are recognized when receipt is probable and the amount is determinable. In this regard we received $.5 million and $1.4 million in insurance recoveries in 2023 and 2024, respectively. Recoveries in 2022 were nominal. See Note 17 to our Consolidated Financial Statements.

Corporate income (expense), net – Corporate income was $19.5 million in 2024 compared to corporate expense of $11.8 million in 2023 due to income of $31.4 million recognized in the fourth quarter of 2024 as a result of the settlement of a liability for an environmental remediation site, including income of $9.6 million received from private companies participating in the settlement. Included in corporate (income) expenses are:

• litigation fees and related costs of $3.0 million in 2024 compared to $4.4 million in 2023, and
• income from environmental remediation and related cost of $20.3 million in 2024 compared to expenses of $.6 million in 2023.

Corporate expenses were $11.8 million in each of 2022 and 2023. Included in corporate expenses are:

• litigation fees and related costs of $4.4 million in 2023 compared to $4.2 million in 2022, and
• environmental remediation and related costs of $.6 million in 2023 compared to $.5 million in 2022.

Overall, we currently expect that our general corporate expenses in 2025 will be higher than in 2024 primarily due to income recognized in 2024 related to the settlement of a liability for an environmental remediation site in the fourth quarter of 2024. See also Item 3 – “Legal Proceedings – Environmental matters and litigation” and Note 17 to our Consolidated Financial Statements.

The level of our litigation fees and related costs varies from period to period depending upon, among other things, the number of cases in which we are currently involved, the nature of such cases and the current stage of such cases (e.g. discovery, pre-trial motions, trial or appeal, if applicable). See Note 17 to our Consolidated Financial Statements. If our current expectations regarding the number of cases in which we expect to be involved during 2025 or the nature of such cases were to change, our corporate expenses could be higher than we currently estimate.

Obligations for environmental remediation and related costs are difficult to assess and estimate and it is possible that actual costs for environmental remediation will exceed accrued amounts or that costs will be incurred in the future for sites in which we cannot currently estimate our liability. If these events were to occur in 2025, our corporate expenses would be higher than we currently estimate. In addition, we adjust our environmental accruals as further information becomes available to us or as circumstances change. Such further information or changed circumstances could result in an increase in our accrued environmental costs. See Note 17 to our Consolidated Financial Statements.

Interest and dividend income – Interest income increased $1.4 million in 2024 compared to 2023 and increased $5.8 million in 2023 compared to 2022 primarily due to higher interest rates and increased investment balances, somewhat offset by lower average balances on CompX’s revolving promissory note receivable from Valhi.

Marketable equity securities – Unrealized gains or losses on our marketable equity securities are recognized in Marketable equity securities on our Consolidated Statements of Operations. See Note 5 to our Consolidated Financial Statements.

Income tax expense (benefit) – We recognized income tax expense of $2.8 million in 2022, an income tax benefit of $7.0 million in 2023 and income tax expense of $14.1 million in 2024.

In accordance with GAAP, we recognize deferred income taxes on our undistributed equity in earnings of Kronos. Because we and Kronos are part of the same U.S. federal income tax group, any dividends we receive from Kronos are nontaxable to us. Accordingly, we do not recognize and we are not required to pay income taxes on dividends from Kronos. Therefore, our full-year effective income tax rate will generally be lower than the U.S. federal statutory income tax rate in years during which we receive dividends from Kronos and recognize equity in earnings of Kronos. Conversely, our effective income tax rate will generally be higher than the U.S. federal statutory income tax rate in years during which we receive dividends from Kronos and recognize equity in losses of Kronos. During interim periods, our effective income tax rate may not necessarily correspond to the foregoing due to the application of accounting for income taxes in interim periods which requires us to base our effective rate on full year projections. We received aggregate dividends from Kronos of $26.8 million in each of 2022 and 2023 and $16.9 million in 2024. Our effective tax rate attributable to our equity in earnings (losses) of Kronos, including the effect of non-taxable dividends we received from Kronos, was a 3.4% expense in 2022, a 58.5% expense in 2023 and a 7.5% expense in 2024. The increase in our effective rate from 2022 to 2023 is attributable to the effects of Kronos’ loss in 2023 as compared to earnings in 2022. The decrease in our effective rate from 2023 to 2024 is attributable to the combined effects of Kronos’ earnings in 2024 as compared to loss in 2023 and the lower non-taxable dividend income we received from Kronos in 2024 as compared to 2023.

See Note 14 to our Consolidated Financial Statements for more information about our 2024 income tax items, including a tabular reconciliation of our statutory tax expense to our actual tax expense (benefit).

Noncontrolling interest – Noncontrolling interest in net income is directly attributable to CompX’s net income and reflects CompX’s earnings in 2022, 2023 and 2024.

Related party transactions – We are a party to certain transactions with related parties. See Notes 1 and 16 to our Consolidated Financial Statements. It is our policy to engage in transactions with related parties on terms, in our opinion, no less favorable to us than we could obtain from unrelated parties.

Equity in earnings of Kronos Worldwide, Inc.

(Dollars in millions)

* Thousands of metric tons

As previously reported, effective the Acquisition Date, of July 16, 2024 Kronos acquired the 50% joint venture interest in LPC previously held by Venator. Prior to the acquisition, Kronos held a 50% joint venture interest in LPC through a wholly-owned subsidiary. LPC was operated as a manufacturing joint venture between Kronos and Venator. Following the acquisition, LPC became a wholly-owned subsidiary of Kronos. Kronos acquired the 50% joint venture interest that it did not already own for consideration of $185 million less a working capital adjustment. An additional earn-out payment of up to $15 million based on Kronos’ aggregate consolidated net income before interest expense, income taxes and depreciation and amortization expense, or EBITDA, during a two-year period comprising calendar years 2025 and 2026 may be required. The acquisition was financed through borrowings of $132.1 million under Kronos’ Global Revolver and the remainder paid with Kronos’ cash on hand. Kronos accounted for the acquisition of the interest in LPC as a business combination. See Note 6 to our Consolidated Financial Statements.

Industry conditions and 2024 overview – Kronos and the TiO2 industry experienced an extended period of significantly reduced demand reflected in its sales volumes beginning in the second half of 2022 and continuing throughout 2023. While demand improved in 2024 resulting in increased sales volumes across all major markets compared to the prior year, overall demand remained below average historical levels. After improving in the first half of 2024, demand moderated in the second half of the year, which placed downward pressure on Kronos’ TiO2 pricing with 2024 average TiO2 selling prices approximately 5% below the average TiO2 selling prices for 2023.

Kronos operated its production facilities at 72% of practical capacity utilization in 2023 in response to decreased demand and higher production costs. As a result of the increase in demand experienced in the fourth quarter of 2023 and the first quarter of 2024, along with more favorable production costs, Kronos began increasing its production rates during the first quarter of 2024 and it operated at near practical capacity in the second, third and fourth quarters of 2024 resulting in 96% of practical capacity utilization in 2024.

The following table shows Kronos’ capacity utilization rates during 2023 and 2024.

Excluding the effect of changes in currency exchange rates, Kronos’ cost of sales per metric ton of TiO2 sold in 2024 was significantly lower as compared to 2023 primarily due to significant decreases in per metric ton production costs (primarily energy and raw materials).

In response to the extended period of reduced demand in 2023, discussed above, Kronos took measures to reduce its operating costs and improve its long-term cost structure such as the implementation of certain voluntary and involuntary workforce reductions during the second half of 2023 that primarily impacted its European operations. A substantial portion of Kronos’ workforce reductions were accomplished through voluntary programs, for which eligible workforce reduction costs are recognized at the time both the employee and employer are irrevocably committed to the terms of the separation. These workforce reductions impacted approximately 100 employees. Kronos recognized a total of approximately $6 million in charges primarily in the fourth quarter of 2023 related to workforce reductions it implemented during the second half of 2023. In the third quarter of 2024, Kronos closed its sulfate process production line at its plant in Varennes, Canada. As a result of the process line closure, Kronos recognized charges to cost of sales of approximately $2 million during 2024 related to workforce reductions. Kronos also recognized approximately $14 million in non-cash charges primarily related to accelerated depreciation in the second and third quarters of 2024.

Net sales – Kronos’ net sales in 2024 increased 13%, or $220.6 million, compared to 2023 primarily due to the effects of a 20% increase in sales volumes due to improved overall demand across all major markets (which increased net sales by approximately $333 million) partially offset by a 5% decrease in average TiO2 selling prices (which decreased net sales by approximately $83 million). Changes in product mix negatively contributed to net sales, primarily due to changes in product sales mix in export markets in 2024 as compared to 2023. Additionally, Kronos estimates that changes in currency exchange rates (primarily the euro) increased its net sales by approximately $5 million in 2024 as compared to 2023. TiO2 selling prices will increase or decrease generally as a result of competitive market pressures and changes in the relative level of supply and demand as well as changes in raw material and other manufacturing costs. Incremental sales volumes resulting from the LPC acquisition did not significantly impact comparisons to the prior year.

Kronos’ net sales in 2023 decreased 14%, or $263.7 million, compared to 2022 primarily due to a 13% decrease in sales volumes (which decreased net sales by approximately $251 million) and a 4% decrease in average TiO2 selling prices (which decreased net sales by approximately $77 million). Changes in product mix positively contributed to net sales, primarily due to higher average selling prices and sales volumes in its complementary businesses which somewhat offset declines in TiO2 sales volumes. In addition to the impact of sales volumes and average TiO2 selling prices, Kronos estimates that changes in currency exchange rates (primarily the euro) increased its net sales by approximately $10 million in 2023 as compared to 2022. TiO2 selling prices will increase or decrease generally as a result of competitive market pressures, changes in the relative level of supply and demand as well as changes in raw material and other manufacturing costs.

Kronos’ sales volumes decreased 13% in 2023 as compared to 2022 due to lower overall demand across all major markets noted above. The lower overall demand Kronos began experiencing in the second half of 2022 continued throughout most of 2023. However, Kronos’ sales volumes were 29% higher in the fourth quarter of 2023 as compared to the fourth quarter of 2022 due to strengthening demand for TiO2 in its primary markets of Europe and North America.

Cost of sales and gross margin – Kronos’ cost of sales increased $26.2 million, or 2%, in 2024 compared to 2023 due to the net effects of a 20% increase in sales volumes, a 33% increase in production rates resulting in reduced unabsorbed fixed production costs, and lower production costs of approximately $115 million (primarily energy and raw materials). Kronos’ unabsorbed fixed production costs in 2024 were $12 million (incurred in the first quarter) compared to $96 million in 2023 related to curtailments that began in 2022 and continued into the first quarter of 2024, as discussed above. Kronos’ cost of sales in 2024 include a charge of approximately $2 million related to workforce reductions and approximately $14 million in non-cash charges related to the closure of its sulfate process line in Canada discussed above. Sales and production volumes resulting from the LPC acquisition did not materially impact comparisons to the prior year.

Kronos’ cost of sales as a percentage of net sales decreased to 81% in 2024 compared to 90% in 2023 primarily due to the favorable effects of increased sales, lower production costs and higher production volumes resulting in increased coverage of fixed production costs.

Kronos’ gross margin as a percentage of net sales increased to 19% in 2024 compared to 10% in 2023. As discussed and quantified above, Kronos’ gross margin as a percentage of net sales increased primarily due to higher sales and production volumes as well as lower production costs, partially offset by lower average TiO2 selling prices.

Kronos’ cost of sales decreased $37.5 million, or 2%, in 2023 compared to 2022 due to the net effects of a 13% decrease in sales volumes, a 19% decrease in production volumes at certain of its manufacturing facilities to align inventory levels to anticipated near-term customer demand (which resulted in $96 million of unabsorbed fixed production costs) and higher production costs of approximately $65 million (primarily raw materials). Kronos’ cost of sales as a percentage of net sales increased to 90% in 2023 compared to 80% in 2022 primarily due to the unfavorable effects of higher production costs (primarily raw materials) and unabsorbed fixed production costs due to lower production volumes.

Kronos’ gross margin as a percentage of net sales decreased to 10% in 2023 compared to 20% in 2022. As discussed and quantified above, Kronos’ gross margin as a percentage of net sales decreased primarily due to lower production and sales volumes, lower average TiO2 selling prices, higher production costs and changes in currency exchange rates.

Other operating income and expense, net – Kronos’ selling, general and administrative expense increased $14.4 million, or 7%, in 2024 compared to 2023. This increase was primarily due to higher distribution costs related to higher overall sales volumes compared to 2023. Kronos’ selling, general and administrative expense in 2024 also includes $2.2 million of transaction costs incurred in connection with the LPC acquisition. Selling, general and administrative expense also decreased due to lower costs related to workforce reductions in 2024 compared to 2023. Kronos’ selling, general and administrative expenses decreased $20.1 million, or 9%, in 2023 compared to 2022 primarily due to lower distribution costs related to lower overall sales volumes during the year. Selling, general and administrative expense as a percentage of net sales increased in 2023 compared to 2022 as a result of lower net sales and $5.8 million in charges related to workforce reductions.

Income (loss) from operations – Kronos had income from operations of $122.9 million in 2024 compared to a loss from operations of $56.0 million in 2023 as a result of the factors impacting gross margin discussed above. Kronos recognized a gain of $2.5 million in 2023 related to cash received from the settlement of a business interruption insurance claim. Kronos estimates that changes in currency exchange rates increased income from operations by approximately $10 million in 2024 as compared to 2023, as further discussed below.

Kronos had a loss from operations of $56.0 million in 2023 compared to income from operations of $159.6 million in 2022 as a result of the factors impacting gross margin discussed above. Kronos recognized a gain of $2.5 million in 2023 and a gain of $2.7 million in 2022 related to cash received from the settlement of a business interruption insurance claim related to Hurricane Laura. Kronos estimates changes in currency exchange rates decreased its loss from operations by approximately $16 million in 2023 as compared to 2022, as discussed in the Effects of currency exchange rates section below.

Other non-operating income (expense) – Kronos recognized a gain on the remeasurement of its investment in LPC of $64.5 million in 2024 as a result of the acquisition. Kronos’ interest expense in 2024 increased $25.8 million compared to 2023 primarily due to higher interest rates on the debt exchange and the issuance of new notes discussed below and higher average debt balances as a result of the LPC acquisition. As a result of the exchange, Kronos’ interest expense for 2024 also includes a charge of $1.5 million for the write-off of deferred financing costs. Kronos recognized a gain of $1.2 million on the change in value of its marketable equity securities in 2024 compared to a loss of $1.0 million in 2023. Kronos’ other components of net periodic pension and OPEB cost in 2024 decreased $4.1 million compared to 2023 primarily due to a higher expected return on plan assets, lower discount rates impacting interest costs and a non-recurring $1.3 million in settlement costs related to the termination and buy-out of its U.K. pension plan in the second quarter of 2023.

Kronos recognized unrealized losses of $1.0 million in each of 2023 and 2022 on the change in value of its marketable equity securities. Kronos’ other components of net periodic pension and OPEB cost in 2023 decreased $7.2 million compared to 2022 primarily due to the net effects of higher discount rates impacting interest cost, previously unrecognized actuarial losses and $1.3 million in settlement costs related to the termination and buy-out of its pension plan in the United Kingdom during the second quarter of 2023. Kronos’ interest expense in 2023 was comparable to interest expense in 2022.

Income tax expense (benefit) – Kronos recognized income tax expense of $63.4 million in 2024 compared to an income tax benefit of $23.8 million in 2023. The difference is primarily due to higher earnings in 2024 and the jurisdictional mix of such earnings. Kronos’ earnings are subject to income tax in various U.S. and non-U.S. jurisdictions, and the income tax rates applicable to the pre-tax earnings (losses) of its non-U.S. operations are generally higher than the income tax rates applicable to its U.S. operations. Kronos would generally expect its overall effective tax rate, excluding the effect of any increase or decrease in its deferred income tax asset valuation allowance or changes in its reserve for uncertain tax positions, to be higher than the U.S. federal statutory tax rate of 21% primarily because of its sizeable non-U.S. operations.

Kronos’ income tax expense in 2024 includes a non-cash deferred income tax expense of $8.2 million, recognized in the fourth quarter, related to the recognition of a deferred income tax asset valuation allowance related to its Belgian net deferred tax assets. Kronos continues to believe it will ultimately realize the full benefit of its Belgian NOL carryforwards, in part because of their indefinite carryforward period. However, Kronos’ ability to reverse all or a portion of such valuation allowance in the future is dependent on the presence of sufficient positive evidence, such as the existence of cumulative profits in the most recent twelve consecutive quarters, and the ability to demonstrate future profitability for a sustainable period. Until such time as Kronos is able to reverse the valuation allowance in full, to the extent it generates additional losses in Belgium in the intervening periods, Kronos’ effective income tax rate will be negatively impacted, because any further losses will effectively be recognized without the net income tax benefit.

On December 10, 2024, the Department of the Treasury and the Internal Revenue Service released final currency regulations under §987 and related rules (the “2024 Final Regulations”). The 2024 Final Regulations generally apply to tax years beginning after December 31, 2024, and include transition rules that require Kronos to compute a pretransition gain or loss for currency translation related to the operations, assets and liabilities of its non-U.S. qualified business units. Pursuant to the 2024 Final Regulations, Kronos has calculated a pretransition gain of $77.1 million and, accordingly, its income tax expense in 2024 includes a non-cash deferred income tax expense of $16.5 million recognized in the fourth quarter.

Kronos recognized an income tax benefit of $23.8 million in 2023 compared to income tax expense of $29.4 million in 2022. The difference is primarily due to lower earnings in 2023 and the jurisdictional mix of such earnings.

Kronos’ consolidated effective income tax rate in 2025 is expected to be higher than the U.S. federal statutory rate of 21% because the income tax rates applicable to the earnings (losses) of Kronos’ non-U.S. operations will be higher than the income tax rates applicable to its U.S. operations and due to the expected mix of earnings.

Effects of currency exchange rates

Kronos has substantial operations and assets located outside the United States (primarily in Germany, Belgium, Norway and Canada). The majority of its sales from non-U.S. operations are denominated in currencies other than the U.S. dollar, principally the euro, other major European currencies and the Canadian dollar. A portion of Kronos’ sales generated from its non-U.S. operations is denominated in the U.S. dollar (and consequently its non-U.S. operations will generally hold U.S. dollars from time to time). Certain raw materials used in all Kronos’ production facilities, primarily titanium-containing feedstocks, are purchased primarily in U.S. dollars, while labor and other production and administrative costs are incurred primarily in local currencies. Consequently, the translated U.S. dollar value of Kronos’ non-U.S. sales and operating results are subject to currency exchange rate fluctuations which may favorably or unfavorably impact reported earnings and may affect the comparability of period-to-period operating results. In addition to the impact of the translation of sales and expenses over time, Kronos’ non-U.S. operations also generate currency transaction gains and losses which primarily relate to (i) the difference between the currency exchange rates in effect when non-local currency sales or operating costs (primarily U.S. dollar denominated) are initially accrued and when such amounts are settled with the non-local currency and (ii) changes in currency exchange rates during time periods when its non-U.S. operations are holding non-local currency (primarily U.S. dollars).

Kronos fluctuations in currency exchange rates had the following effects on its sales and income from operations for the periods indicated.

Impact of changes in currency exchange rates - 2024 vs 2023

(In millions)

The $5 million increase in Kronos’ net sales (translation gains) was caused primarily by a weakening of the U.S. dollar relative to the euro, as Kronos’ euro-denominated sales were translated into more U.S. dollars in 2024 as compared to 2023. The strengthening of the U.S. dollar relative to the Canadian dollar and the Norwegian krone in 2024 did not have a significant effect on Kronos net sales, as a substantial portion of the sales generated by its Canadian and Norwegian operations is denominated in the U.S. dollar.

The $10 million increase in Kronos’ income from operations was comprised of the following:

• Higher net currency transaction gains of approximately $1 million primarily caused by relative changes in currency exchange rates at each applicable balance sheet date between the U.S. dollar and the euro, Canadian dollar and the Norwegian krone, and between the euro and the Norwegian krone, which causes increases or decreases, as applicable, in U.S. dollar-denominated receivables and payables and U.S. dollar currency held by Kronos’ non-U.S. operations, and in Norwegian krone denominated receivables and payables held by its non-U.S. operations, and
• Approximately $9 million from net currency translation gains primarily caused by a strengthening of the U.S. dollar relative to the Canadian dollar and Norwegian krone, as local currency-denominated operating costs were translated into fewer U.S. dollars in 2024 as compared to 2023. The effect of the weakening of the U.S. dollar relative to the euro caused additional net translation gains as the positive effects of the weaker U.S. dollar on euro-denominated sales more than offset the unfavorable effects on euro-denominated operating costs being translated into more U.S. dollars in 2024 as compared to 2023.

Impact of changes in currency exchange rates - 2023 vs 2022

(In millions)

The $10 million increase in Kronos’ net sales (translation gains) was caused primarily by a weakening of the U.S. dollar relative to the euro, as Kronos’ euro-denominated sales were translated into more U.S. dollars in 2023 as compared to 2022. The strengthening of the U.S. dollar relative to the Canadian dollar and the Norwegian krone in 2023 did not have a significant effect on Kronos net sales, as a substantial portion of the sales generated by its Canadian and Norwegian operations is denominated in the U.S. dollar.

The $16 million decrease in loss from operations was comprised of the following:

• Lower net currency transaction gains of approximately $11 million primarily caused by relative changes in currency exchange rates at each applicable balance sheet date between the U.S. dollar and the euro, Canadian dollar and the Norwegian krone, and between the euro and the Norwegian krone, which causes increases or decreases, as applicable, in U.S. dollar-denominated receivables and payables and U.S. dollar currency held by Kronos’ non-U.S. operations, and in Norwegian krone denominated receivables and payables held by Kronos’ non-U.S. operations, and
• Approximately $27 million from net currency translation gains primarily caused by a strengthening of the U.S. dollar relative to the Canadian dollar and Norwegian krone, as local currency-denominated operating costs were translated into fewer U.S. dollars in 2023 as compared to 2022. The effect of the weakening of the U.S. dollar relative to the euro was nominal in 2023 as compared to 2022.

Outlook

Overall Kronos’ customer demand improved in 2024 compared to the historical low demand it experienced during 2023, although demand levels remained below historical averages and customer demand moderated in the second half of the year as compared to the first half of the year across all major markets. Kronos expects demand to improve in 2025, particularly in Europe where the European Commission enacted duties on Chinese imports of TiO2 in mid-2024; however, it expects overall demand will remain below historical levels due to continued global economic uncertainty caused, in part, by the potential implementation of tariffs by the U.S. and other countries. Kronos believes customer inventory levels were low at the end of 2024 due to customer hesitancy to build inventory late in the year, and it is receiving customer orders on shorter notice than it experienced early in 2024 indicating that customers have a cautious demand outlook and are carefully managing inventory levels. TiO2 selling prices softened in the second half of 2024 in response to sluggish demand and competitive pressures. Kronos expects these pricing pressures to be somewhat mitigated in 2025, particularly in Europe, as a result of the duties enacted on low-cost imports from China. Kronos is operating its facilities at production rates in line with the current and expected near-term demand and believe its production rates for 2025 will be slightly above 2024 rates.

Kronos is focused on cost reduction initiatives designed to improve its long-term cost structure. In 2023, Kronos implemented targeted workforce reductions and certain ongoing process improvement initiatives. In the third quarter of 2024, Kronos closed its Canadian sulfate process line to improve gross margins through the optimization of production of its purified grades. Raw material, energy and other input costs generally improved during 2024; however, energy costs in Europe have trended up in recent months and remain above historical levels. Kronos expects raw material and other input costs will continue to moderate in 2025. Overall, primarily due to improved demand, Kronos expects to report higher operating results for the full year of 2025 as compared to 2024, although it will need to achieve TiO2 selling price increases in order to recognize margins more in-line with historical levels.

As noted above, Kronos acquired full control of LPC in July 2024. Kronos believes this acquisition is a unique opportunity to immediately add value to its customers and better serve the North American marketplace by allowing it to expand its product offerings and increase sales to new and existing customers while recognizing significant synergies, including commercial, overhead and supply chain optimization. Kronos is in the process of fully integrating the additional LPC production capacity, and it expects the acquisition will have a positive impact on its earnings in 2025, although the potential positive impact will be limited by competitive pressures and by the additional debt service costs associated with the increase in borrowings to complete the transaction. With the increased borrowing availability under Kronos’ Global Revolver, as well as cash on hand, Kronos was able to finance the required working capital for the improvement needed to fully integrate the acquired LPC production capacity.

Kronos’ expectations for the TiO2 industry and its operations are based on a number of factors outside its control. Kronos’ operations are affected by global and regional economic, political and regulatory factors, and it has experienced global market disruptions. As noted above, energy costs in Europe, which spiked when Russia invaded Ukraine, remain above historical levels. In addition, Kronos operates a TiO2 facility in Canada, and the majority of production from that facility is currently sold into the U.S. The U.S. federal government’s recently enacted 25% tariff on Kronos’ imports from Canada could harm its ability to compete and adversely impact its earnings and profitability if such tariffs are sustained for an extended period of time without exclusion. Kronos has begun to implement strategies to minimize the potential impacts. Future impacts on Kronos’ operations will depend on, among other things, future energy costs, the effect newly enacted tariffs have on jurisdictions in which Kronos or its customers and suppliers operate, Kronos’ success in implementing mitigation strategies, and the impact economic conditions and geopolitical events have on its operations or its customers’ and suppliers’ operations, all of which remain uncertain and cannot be predicted.

Operations outside the United States

Kronos has substantial operations located outside the United States for which the functional currency is not the U.S. dollar. As a result, the reported amount of our net investment in Kronos will fluctuate based upon changes in currency exchange rates. At December 31, 2024, Kronos had substantial net assets denominated in the euro, Canadian dollar and Norwegian krone.

Critical accounting policies and estimates

Our significant accounting policies are more fully described in Note 1 to our Consolidated Financial Statements. Our Consolidated Financial Statements have been prepared in accordance with accounting principles generally accepted in the United States of America, or (GAAP). The preparation of these financials statements requires us to make estimates and judgments that affect the reported amounts of assets and liabilities and disclosures of contingent assets and liabilities at the date of the financial statements and the reported amount of revenue and expense during the reporting period. On an ongoing basis we evaluate our estimates, including those related to the recoverability of long-lived assets, goodwill, pension and other postretirement benefit obligations and the underlying actuarial assumptions related thereto, the realization of deferred income tax assets and accruals for litigation, income tax and other contingencies. We base our estimates on historical experience and on various other assumptions which we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the reported amounts of assets, liabilities, revenues and expenses. Actual results may differ significantly from previously-estimated amounts under different assumptions or conditions.

We believe the most critical accounting policies and estimates involving significant judgment primarily relate to contingencies, certain long-lived assets, considerations in the recoverability and impairment assessments for goodwill and defined benefit pension plans. We have discussed the development, selection and disclosure of our critical accounting estimates with the audit committee of our board of directors.

• Contingencies – We record accruals for environmental, legal and other contingencies and commitments when estimated future expenditures associated with such contingencies become probable, and the amounts can be reasonably estimated. However, new information may become available, or circumstances (such as applicable laws and regulations) may change, thereby resulting in an increase or decrease in the amount

required to be accrued for such matters (and therefore a decrease or increase in reported net income in the period of such change).

Obligations for environmental remediation costs are difficult to assess and it is possible that actual costs for environmental remediation will exceed accrued amounts or that costs will be incurred in the future for sites in which we cannot currently estimate our liability. If these events were to occur in 2025, our corporate expenses would be higher than we currently estimate. In addition, we adjust our environmental remediation and related costs accruals (and potential range of our liabilities) as further information becomes available to us or as circumstances change which involves our judgment regarding current facts and circumstances for each site and is subject to various assumptions and estimates. Such further information or changed circumstances could result in an increase in our accrued environmental costs. See Note 17 to our Consolidated Financial Statements.

• Long-lived assets – The net book value of our property and equipment totaled $24.0 million at December 31, 2024, all of which relates to CompX. We assess property and equipment for impairment only when circumstances indicate an impairment may exist. Our determination is based upon, among other things, our estimates of the amount of future net cash flows to be generated by the long-lived asset (Level 3 inputs) and our estimates of the current fair value of the asset.

Significant judgment is required in estimating such cash flows. Adverse changes in such estimates of future net cash flows or estimates of fair value could result in an inability to recover the carrying value of the long-lived asset, thereby possibly requiring an impairment charge to be recognized in the future. We do not assess our property and equipment for impairment unless certain impairment indicators are present. We did not evaluate any long-lived assets for impairment during 2024 because no such impairment indicators were present.

• Goodwill – Our net goodwill totaled $27.2 million at December 31, 2024, all related to CompX’s Security Products reporting unit. Goodwill is required to be tested annually or at other times whenever an event occurs or circumstances change that would more-likely-than-not reduce the fair value of a reporting unit below its carrying value. CompX performs its annual goodwill impairment test in the third quarter of each year or at other times whenever an event occurs or circumstances change that would more-likely-than-not reduce the fair value of a reporting unit below its carrying value. Such events or circumstances may include: adverse industry or economic trends, lower projections of profitability, or a sustained decline in CompX’s market capitalization. These events or circumstances, among other items, may be indications of potential impairment issues which are triggering events requiring the testing of an asset’s carrying value for recoverability. An entity may first assess qualitative factors to determine whether it is necessary to complete a quantitative impairment test using a more-likely-than-not criteria. If an entity believes it is more-likely-than-not the fair value of a reporting unit is greater than its carrying value, including goodwill, the quantitative impairment test can be bypassed. Alternatively, an entity has an unconditional option to bypass the qualitative assessment and proceed directly to performing the quantitative impairment test.

When performing a qualitative assessment considerable management judgment is necessary to evaluate the qualitative impact of events and circumstances on the fair value of a reporting unit. Events and circumstances considered in our impairment evaluations, such as CompX’s historical profits and stability of the markets served, are consistent with factors utilized with our internal projections and operating plan. However, future events and circumstances could result in materially different findings which could result in the recognition of a material goodwill impairment.

Evaluations of possible impairment utilizing the quantitative impairment test require CompX to estimate, among other factors: forecasts of future operating results, revenue growth, operating margin, tax rates, capital expenditures, depreciation, working capital, weighted average cost of capital, long-term growth rates, risk premiums, terminal values, and fair values of reporting units and assets. The goodwill impairment test is subject to uncertainties arising from such events as changes in competitive conditions, the current general economic environment, material changes in growth rate assumptions that could positively or negatively impact anticipated future operating conditions and cash flows, changes in the discount rate, and the impact of strategic decisions. If any of these factors were to materially change such change may require revaluation of the reported goodwill. Changes in estimates or the application of alternative assumptions could produce significantly different results.

In 2024, CompX used the qualitative assessment for its annual impairment test and determined it was not necessary to perform the quantitative goodwill impairment test, as it concluded it is more-likely-than-not the fair value of the Security Products reporting unit exceeded its carrying amount. See Notes 1 and 7 to our Consolidated Financial Statements.

Defined benefit pension plans – We maintain a defined benefit pension plan in the U.S. As a result of the spin-off of Kronos in 2003, Kronos participates in our pension plan. Using participant data, we account for our portion of the combined pension plan as if it were a separate pension plan from the portion in which Kronos participates. As a result of the LPC acquisition in July 2024 (see Note 6 to our Consolidated Financial Statements), Kronos acquired the LPC defined benefit pension plan, which was overfunded on the Acquisition Date. Effective December 31, 2024, the LPC defined benefit pension plan was merged into our combined U.S. pension plan. Because we account for our portion of the combined pension plan separately, the plan merger did not impact our Consolidated Financial Statements. See Note 11 to our Consolidated Financial Statements.

We previously maintained a plan in the United Kingdom (U.K.) related to a former disposed U.K. business unit. In accordance with applicable U.K. pension regulations, we entered into an agreement in March 2021 for the bulk annuity purchase, or “buy-in”, with a specialist insurer of defined benefit pension plans. Following the buy-in, individual policies replaced the bulk annuity policy in a “buy-out” which was completed as of May 1, 2023. The buy-out was completed with existing plan funds. At the completion of the buy-out, the assets and liabilities of the U.K. pension plan were removed from our Consolidated Financial Statements and a non-cash pension plan termination loss of $4.9 million was recognized in the second quarter of 2023. See Note 11 to our Consolidated Financial Statements.

We recognized consolidated defined benefit pension plan expense of $1.4 million in 2022, $6.5 million in 2023, including the loss on the termination of the U.K. pension plan of $4.9 million discussed above and $1.4 million in 2024. The funding requirements for these defined benefit pension plans are generally based upon applicable regulations (such as ERISA in the U.S.) and will generally differ from pension expense recognized under GAAP for financial reporting purposes. We made contributions to our plans of approximately $1.2 million in 2022. In 2023, we made a net contribution of $.2 million to our plans (a contribution of approximately $1.1 million to our U.S. plan and a refund of approximately $.9 million as a result of the termination of the U.K. plan). In 2024, we made a contribution of $1.0 to our U.S. plan.

Under defined benefit pension plan accounting, defined benefit pension plan expense and prepaid and accrued pension costs are each recognized based on certain actuarial assumptions, principally the assumed discount rate and the assumed long-term rate of return on plan assets. We recognize the full funded status of our defined benefit pension plans as either an asset (for overfunded plans) or a liability (for underfunded plans) in our Consolidated Balance Sheets.

The discount rates we use for determining defined benefit pension expense and the related pension obligations are based on current interest rates earned on long-term bonds that receive one of the two highest ratings given by recognized rating agencies in the applicable country where the defined benefit pension benefits are being paid. In addition, we receive third-party advice about appropriate discount rates, and these advisors may in some cases use their own market indices. We adjust these discount rates as of each December 31 valuation date to reflect then-current interest rates on such long-term bonds. We use these discount rates to determine the actuarial present value of the pension obligations as of December 31 of that year. We also use these discount rates to determine the interest component of defined benefit pension expense for the following year.

At December 31, 2024, our projected benefit obligations for our U.S. defined benefit plan is $26.6 million. As noted above, we terminated our U.K. pension plan in May 2023. We use different discount rate assumptions in determining our defined benefit pension plan obligations and expense for the plan we maintain in the United States and previously in the U.K. as the interest rate environment differs from country to country.

We used the following discount rates for our defined benefit pension plans:

The assumed long-term rate of return on plan assets represents the estimated average rate of earnings expected to be earned on the funds invested or to be invested from the plans’ assets provided to fund the benefit payments inherent in the projected benefit obligations. Unlike the discount rate, which is adjusted each year based on changes in current long-term interest rates, the assumed long-term rate of return on plan assets will not necessarily change based upon the actual short-term performance of the plan assets in any given year. Defined benefit pension expense each year is based upon the assumed long-term rate of return on plan assets for each plan, the actual fair value of the plan assets as of the beginning of the year and an estimate of the amount of contributions to and distributions from the plan during the year. Differences between the expected return on plan assets for a given year and the actual return are deferred and amortized over future periods based on the average remaining life expectancy of the inactive participants.

We used different long-term rates of return on plan asset assumptions for our U.S. and previously maintained U.K. defined benefit pension plan expense because the respective plan assets were invested in a different mix of investments and the long-term rates of return for different investments differ from country to country.

In determining the expected long-term rate of return on plan asset assumptions, we consider the long-term asset mix (e.g., equity vs. fixed income) for the assets for each of our plans and the expected long-term rates of return for such asset components. In addition, we receive third-party advice about appropriate long-term rates of return. See Note 11 to our Consolidated Financial Statements.

Our assumed long-term rates of return on plan assets for 2022, 2023 and 2024 were as follows:

Our long-term rate of return on plan asset assumptions in 2025 used for purposes of determining our 2025 defined benefit pension plan expense is 5.0%. As noted above, during 2022 and through the approximate plan termination date in 2023, all of the assets of the U.K. plan were invested primarily in insurance contracts.

Based on the actuarial assumptions described above, we expect to recognize defined benefit pension expense of approximately $1.3 million in 2025. In comparison, we do not expect to be required to make any contributions to such plan during 2025.

As noted above, defined benefit pension expense and the amounts recognized as accrued pension costs are based upon the actuarial assumptions discussed above. We believe that all of the actuarial assumptions used are reasonable and appropriate. However, if we had lowered the assumed discount rate by 25 basis points for our plan as of December 31, 2024, our aggregate projected benefit obligation would have increased by approximately $.6 million at that date. Such a change would not materially impact our defined benefit pension expense for 2025. Similarly, if we lowered the assumed long-term rate of return on plan assets by 25 basis points for our plan, such a change would not materially impact our defined benefit pension expense for 2025.

LIQUIDITY AND CAPITAL RESOURCES

Consolidated cash flows

Operating activities

Trends in cash flows from operating activities, excluding the impact of deferred taxes and relative changes in assets and liabilities, are generally similar to trends in our income from operations. Changes in working capital are primarily related to changes in receivables and inventories (as discussed below) and payables and accrued liabilities. Net cash provided by operating activities was $25.6 million in 2024 compared to $37.0 million in 2023. The $11.4 million decrease in cash provided by operating activities includes the net effects of:

• lower dividends received from Kronos in 2024 of $9.9 million;
• lower segment profit from CompX in 2024 of $8.4 million;
• a $4.1 million increase in interest received in 2024 due to higher interest rates and increased investment balances, offset by lower average balances on CompX’s revolving promissory note receivable from affiliate;
• lower net cash used for relative changes in receivables, inventories, prepaid expenses, payables and accrued liabilities in 2024 of $3.2 million; and
• a $.4 million increase in cash paid for taxes in 2024 due to the relative timing of payments.

Net cash provided by operating activities was $37.0 million in 2023 compared to $26.9 million in 2022. The $10.1 million increase in cash provided by operating activities includes the net effects of:

• lower net cash used for relative changes in receivables, inventories, prepaid expenses, payables and accrued liabilities in 2023 of $6.7 million;
• a $2.6 million increase in interest received in 2023 due to higher interest rates and increased investment balances, offset by lower average balances on CompX’s revolving promissory note receivable from affiliate; and
• a $1.4 million decrease in cash paid for taxes in 2023 due to the relative timing of payments.

We do not have complete access to CompX’s cash flows in part because we do not own 100% of CompX. A detail of our consolidated cash flows from operating activities is presented in the table below. Intercompany dividends have been eliminated. The reference to NL Parent in the tables below is a reference to NL Industries, Inc., as the parent company of CompX and our other wholly-owned subsidiaries.

(In millions)

Relative changes in working capital can have a significant effect on cash flows from operating activities. As shown below, our total average days sales outstanding decreased from December 31, 2023 to December 31, 2024 and is primarily impacted by the timing of sales and collections in the last month of the year. As shown below, our average number of days in inventory at December 31, 2024 was comparable to December 31, 2023 primarily due to an increase at CompX’s Security Products reporting unit due to the fulfillment and shipping of a significant order during the fourth quarter of 2023, partially offset by a decrease at CompX’s Marine Components reporting unit due to elevated inventory balances at December 31, 2023 as a result of prior orders of certain raw materials with longer lead times delivered in the fourth quarter of 2023. For comparative purposes, we have provided 2022 numbers below.

Investing activities

Capital expenditures, substantially all of which relate to CompX, have primarily emphasized improving manufacturing facilities and investing in manufacturing equipment, utilizing new technologies and increased automation of the manufacturing process, to provide for increased productivity and efficiency in order to meet expected customer demand and properly maintain facilities and technology infrastructure. Capital expenditures were $3.7 million in 2022, $1.1 million in 2023 and $1.4 million in 2024. Capital expenditures in 2022 were higher as CompX accelerated the timeline for certain projects designed to increase its capacity and improve its capabilities in response to strong customer demand. Beginning in the latter half of 2022 and continuing through 2024, CompX limited investments primarily to those expenditures required to meet its existing demand and to properly maintain its facilities and technology infrastructure.

Investing activities also include net collections of $5.5 million ($24.3 million of gross borrowings and $29.8 million of gross repayments) in 2022, net collections of $2.6 million ($27 9 million of gross borrowings and $30.5 million of gross repayments) in 2023 and net collections of $1.3 million ($25.0 million of gross borrowings and $26.3 million of gross repayments) in 2024 under a promissory note receivable from an affiliate. See Note 16 to our Consolidated Financial Statements.

During 2022, we purchased U.S. treasury marketable securities totaling $70.0 million. During 2023, we purchased U.S. treasury marketable securities totaling $61.4 million, and received gross proceeds totaling $82.0 million related to U.S. treasury bill maturities. During 2024, we received gross proceeds of $54.0 million related to U.S. treasury bill maturities. See Note 5 to our Consolidated Financial Statements.

During 2024, we had proceeds from the sale of land not used in our operations of $5.0 million.

Financing activities

Quarterly dividends paid totaled $13.7 million ($.28 per share, or $.07 per share per quarter) in each of 2022 and 2023 and $15.6 million ($.32 per share, or $.08 per share per quarter in 2024). In addition, our board of directors declared special dividends which totaled $17.1 million ($.35 per share) paid in August 2022 and $21.0 million ($.43 per share) paid in August 2024. In February 2025 our board of directors declared a first quarter 2025 dividend of $.09 per share, to be paid on March 27, 2025 to NL stockholders of record as of March 11, 2025. The declaration and payment of future dividends, and the amount thereof, is discretionary and is dependent upon our financial condition, cash requirements, contractual obligations and restrictions and other factors deemed relevant by our board of directors. The amount and timing of past dividends is not necessarily indicative of the amount or timing of any future dividends which might be paid. There are currently no contractual restrictions on the amount of dividends which we may pay.

Cash flows from financing activities include CompX dividends paid to its stockholders other than us aggregating $4.3 million in 2022 ($2.7 million of which relates to a special dividend), $1.6 million in 2023 and $5.0 million in 2024 ($3.1 million of which relates to a special dividend).

During 2022, CompX acquired 78,900 shares of its Class A common stock (8,900 shares from affiliates in two private transactions, and 70,000 shares in a single market transaction) for an aggregate purchase price of $1.7 million.

Outstanding debt obligations

At December 31, 2024, NLKW had outstanding debt obligations of $.5 million under its secured revolving credit facility with Valhi, and CompX did not have any outstanding debt obligations. We are in compliance with all of the covenants contained in our secured revolving credit facility with Valhi at December 31, 2024. See Note 10 to our Consolidated Financial Statements

At December 31, 2024, Kronos had $10 million outstanding on its Global Revolver. Availability under the Global Revolver is subject to a borrowing base calculation, as defined in the agreement. The borrowing base calculated as of December 31, 2024 was approximately $278 million. Effective July 17, 2024, Kronos completed an amendment to its Global Revolver (the “Second Amendment”). Among other things, the Second Amendment increased the maximum borrowing amount from $225 million to $300 million, extended the maturity date to July 2029 and expanded the facility to include LPC and LPC’s receivables and certain of its inventories in the borrowing base. The LPC acquisition was financed through borrowings of $132.1 million under Kronos’ Global Revolver with the remainder paid with cash on hand. In February 2024, Kronos exchanged €325 million principal amount of its outstanding 3.75% Senior Secured Notes due in September 2025 (the “Old Notes”) for newly issued €276.174 million 9.50% Senior Secured Notes due March 2029 (the “New Notes”) plus additional cash consideration of €48.75 million ($52.6 million) paid to the holders of the Old Notes and entered into a $53.7 million unsecured term loan from Contran Corporation due in September 2029 (the “Contran Term Loan”). On July 30, 2024, Kronos issued an additional €75 million principal amount of 9.50% Senior Secured Notes due 2029 (the “Additional New Notes” and, together with the Old Notes and the New Notes, the “Senior Secured Notes”). The Additional New Notes were issued at a premium of 107.50% of their principal amount, plus accrued interest from February 12, 2024, resulting in net proceeds of approximately $90 million, after fees and expenses. The Additional New Notes are fungible with the New Notes, are treated as a single series with the New Notes and have the same terms as the New Notes, other than their date of issuance and issue price. The proceeds from the Additional New Notes were used to pay down borrowings incurred under Kronos’ Global Revolver. Subsequent to the issuance of the Additional New Notes, the Contran Term Loan was amended in August 2024 to change the interest rate from 11.5% (which had been determined by adding an additional spread of 2% to the final interest rate on the New Notes issued in February 2024) to 9.54% (determined by adding a spread of 2% to the effective interest rate of the Additional New Notes issued in July 2024). In each case, the spread used to determine the rate was based upon comparable debt transactions at the time of the issuance of the applicable notes.

The Contran Term Loan is subordinated in right of payment to Kronos’ Senior Secured Notes and Kronos’ Global Revolver. Kronos’ Senior Secured Notes, the Contran Term Loan and Kronos’ Global Revolver contain a number of covenants and restrictions which, among other things, restrict its ability to incur additional debt, incur liens, pay dividends or merge or consolidate with, or sell or transfer substantially all of its assets to, another entity, and contain other provisions and restrictive covenants customary in lending transactions of these types. Certain of Kronos’ credit agreements contain provisions which could result in the acceleration of indebtedness prior to their stated maturity for reasons other than defaults for failure to comply with typical financial or payment covenants. For example, the credit agreements allow the lender to accelerate the maturity of the indebtedness upon a change of control (as defined in the agreement) of the borrower. In addition, the credit agreements could result in the acceleration of all or a portion of the indebtedness following a sale of assets outside the ordinary course of business. Kronos is in compliance with all of its debt covenants at December 31, 2024. Kronos believes that it will be able to continue to comply with the financial covenants contained in its credit facility through its maturity; however, if its future operating results differ materially from its expectations it may be unable to maintain compliance.

Future cash requirements

Liquidity

Our primary source of liquidity on an ongoing basis is our cash flow from operating activities and credit facilities with affiliates and banks as further discussed below. We generally use these amounts to fund capital expenditures

(substantially all of which relate to CompX), pay ongoing environmental remediation and litigation costs, and provide for the payment of dividends (if declared).

At December 31, 2024, we had aggregate restricted and unrestricted cash, cash equivalents and current marketable securities of $184.2 million, substantially all of which was held in the U.S. A detail (in millions) by entity is presented in the table below.

(In millions)

In addition, at December 31, 2024 we owned 1.2 million shares of Valhi common stock with an aggregate market value of $28.0 million. See Note 5 to our Consolidated Financial Statements. We also owned 35.2 million shares of Kronos common stock at December 31, 2024 with an aggregate market value of $343.4 million. See Note 6 to our Consolidated Financial Statements.

We routinely compare our liquidity requirements and alternative uses of capital against the estimated future cash flows we expect to receive from our subsidiaries and affiliates. As a result of this process, we have in the past and may in the future seek to raise additional capital, incur debt, repurchase indebtedness in the market or otherwise, modify our dividend policies, consider the sale of our interests in our subsidiaries, affiliates, business, marketable securities or other assets, or take a combination of these and other steps, to increase liquidity, reduce indebtedness and fund future activities. Such activities have in the past and may in the future involve related companies.

We periodically evaluate acquisitions of interests in or combinations with companies (including related companies) perceived by management to be undervalued in the marketplace. These companies may or may not be engaged in businesses related to our current businesses. We intend to consider such acquisition activities in the future and, in connection with this activity, may consider issuing additional equity securities and increasing indebtedness. From time to time, we also evaluate the restructuring of ownership interests among our respective subsidiaries and related companies.

Based upon our expectations of operating performance, and the anticipated demands on our cash resources we expect to have sufficient liquidity to meet our short-term obligations (defined as the twelve-month period ending December 31, 2025). If actual developments differ materially from our expectations, our liquidity could be adversely affected. In this regard, Valhi has agreed to loan us up to $50 million on a revolving basis. At December 31, 2024, we had $.5 million in outstanding borrowings under this facility, and we had $49.5 million available for future borrowing under the facility. See Note 10 to our Consolidated Financial Statements.

Capital expenditures

Capital expenditures for 2025 are estimated at approximately $3.2 million, substantially all of which relate to CompX. CompX’s 2025 capital investments are primarily to meet its expected customer demand and those required to properly maintain its facilities and technology infrastructure.

Dividends

Because our operations are conducted primarily through subsidiaries and affiliates, our long-term ability to meet parent company-level corporate obligations is largely dependent on the receipt of dividends or other distributions from our subsidiaries and affiliates. A detail of annual dividends we expect to receive from our subsidiaries and affiliates in 2025, based on the number of shares of common stock of these affiliates we own as of December 31, 2024 and their current regular quarterly dividend rate, is presented in the table below.

(In millions)

(In millions)

Investments in our subsidiaries and affiliates and other acquisitions

We have in the past and may in the future, purchase the securities of our subsidiaries and affiliates or third-parties in market or privately-negotiated transactions. We base our purchase decisions on a variety of factors, including an analysis of the optimal use of our capital, taking into account the market value of the securities and the relative value of expected returns on alternative investments. In connection with these activities, we may consider issuing additional equity securities or increasing our indebtedness. We may also evaluate the restructuring of ownership interests of our businesses among our subsidiaries and related companies.

Commitments and contingencies

We are subject to certain commitments and contingencies, as more fully described in Note 17 to our Consolidated Financial Statements or in Part I, Item 3 of this report. In addition to those legal proceedings described in Note 17 to our Consolidated Financial Statements, various legislation and administrative regulations have, from time to time, been proposed that seek to (i) impose various obligations on present and former manufacturers of lead pigment and lead-based paint (including us) with respect to asserted health concerns associated with the use of such products and (ii) effectively overturn court decisions in which we and other pigment manufacturers have been successful. Examples of such proposed legislation include bills which would permit civil liability for damages on the basis of market share, rather than requiring plaintiffs to prove that the defendant’s product caused the alleged damage and bills which would revive actions barred by the statute of limitations. While no legislation or regulations have been enacted to date that are expected to have a material adverse effect on our consolidated financial position, results of operations or liquidity, enactment of such legislation could have such an effect.

As more fully described in the Notes to our Consolidated Financial Statements, we are party to various debt, leases and other agreements which contractually and unconditionally commit us to pay certain amounts in the future. See Note 10 to our Consolidated Financial Statements. See Notes 1 and 14 to our Consolidated Financial Statements for a description of certain income tax contingencies. Additionally, CompX has purchase obligations of $19.8 million ($19.3 million payable in 2025 and $.5 million payable in 2026/2027) which consists of open purchase orders and contractual obligations, primarily commitments to purchase raw materials and for capital projects in process at December 31, 2024. The timing and amount for purchase obligations is based on the contractual payment amount and the contractual payment date for those commitments.

Recent accounting pronouncements

See Note 19 to our Consolidated Financial Statements.

General – We are exposed to market risk from changes in currency exchange rates, interest rates, raw materials and equity security prices.

Interest rates – We are exposed to market risk from changes in interest rates, primarily related to our indebtedness, CompX’s note receivable from affiliate and our investment in marketable debt securities. We have an outstanding principal amount of indebtedness of $.5 million at December 31, 2024 bearing interest at prime plus 1.875%

(9.4% at December 31, 2024) with a maturity date of December 31, 2030. The carrying value of such outstanding indebtedness approximates its fair value.

The outstanding principal amount of the note receivable from affiliate of $9.3 million at December 31, 2024 bears interest at prime plus 1.0% (8.5% at December 31, 2024). We received interest income of $1.0 million from the note during 2024.

Marketable equity security prices – We are exposed to market risk due to changes in prices of the marketable equity securities which we own. The fair value of our equity securities at December 31, 2023 and 2024 was $18.2 million and $28.0 million, respectively. The potential change in the aggregate fair value of these investments, assuming a 10% change in prices, would be $1.8 million and $2.8 million at December 31, 2023 and 2024, respectively.

Raw materials – CompX will occasionally enter into short-term commodity-related raw material supply arrangements to mitigate the impact of future increases in commodity-related raw material costs. CompX does not have long-term supply agreements for its raw material requirements because either it believes the risk of unavailability of those raw materials is low and it believes the downside risk of price volatility to be too great or because long-term supply agreements for those materials are generally not available. CompX does not engage in commodity raw material hedging programs.

Other – The discussion and sensitivity analysis presented above include forward-looking statements of market risk which assume hypothetical changes in market prices. Actual future market conditions will likely differ materially from such assumptions. Accordingly, such forward-looking statements should not be considered to be projections of future events, gains or losses. Such forward-looking statements are subject to certain risks and uncertainties, some of which are listed in “Business."

Evaluation of disclosure controls and procedures

We maintain disclosure controls and procedures which, as defined in Exchange Act Rule 13a-15(e), means controls and other procedures that are designed to ensure that information required to be disclosed in the reports that we file or submit to the SEC under the Securities Exchange Act of 1934, as amended (the Act), is recorded, processed, summarized and reported, within the time periods specified in the SEC’s rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information we are required to disclose in the reports we file or submit to the SEC under the Act is accumulated and communicated to our management, including our principal executive officer and our principal financial officer, or persons performing similar functions, as appropriate to allow timely decisions to be made regarding required disclosure. Each of Courtney J. Riley, our President and Chief Executive Officer and Amy Allbach Samford, our Executive Vice President and Chief Financial Officer, have evaluated the design and effectiveness of our disclosure controls and procedures as of December 31, 2024. Based upon their evaluation, these executive officers have concluded that our disclosure controls and procedures are effective as of the date of this evaluation.

Management’s report on internal control over financial reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting which, as defined by Exchange Act Rule 13a-15(f) means a process designed by, or under the supervision of, our principal executive and principal financial officers, or persons performing similar functions, and effected by the board of directors, management and other personnel, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles (“GAAP”), and includes those policies and procedures that:

• pertain to the maintenance of records that in reasonable detail accurately and fairly reflect the transactions and dispositions of our assets,
• provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with GAAP, and that receipts and expenditures are being made only in accordance with authorizations of management and directors, and
• provide reasonable assurance regarding prevention or timely detection of an unauthorized acquisition, use or disposition of assets that could have a material effect on our Consolidated Financial Statements.

Our evaluation of the effectiveness of internal control over financial reporting is based upon the framework established in Internal Control – Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission in 2013 (commonly referred to as the “2013 COSO” framework). Based on our evaluation under that framework, we have concluded that our internal control over financial reporting was effective as of December 31, 2024.

This annual report does not include an attestation report of our registered public accounting firm regarding internal control over financial reporting. Management’s report was not subject to attestation by our registered public accounting firm pursuant to rules of the SEC that permit us to provide only management’s report in this annual report.

Other

As permitted by the SEC, our assessment of internal control over financial reporting excludes (i) internal control over financial reporting of equity method investees and (ii) internal control over the preparation of any financial statement schedules which would be required by Article 12 of Regulation S-X. However, our assessment of internal control over financial reporting with respect to equity method investees did include controls over the recording of amounts related to our investment that are recorded in the Consolidated Financial Statements, including controls over the selection of accounting methods for our investments, the recognition of equity method earnings and losses and the determination, valuation and recording of our investment account balances.

Changes in internal control over financial reporting

There has been no change to our internal control over financial reporting during the quarter ended December 31, 2024 that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

Certifications

Our chief executive officer is required to annually file a certification with the New York Stock Exchange (NYSE), certifying our compliance with the corporate governance listing standards of the NYSE. During 2024, our chief executive officer filed such annual certification with the NYSE. The 2024 certification was unqualified.

Our chief executive officer and chief financial officer are also required to, among other things, quarterly file certifications with the SEC regarding the quality of our public disclosures, as required by Section 302 of the Sarbanes-Oxley Act of 2002. We have filed the certifications for the quarter ended December 31, 2024 as Exhibits 31.1 and 31.2 to this Annual Report on Form 10-K.