Beam Global: Form 10-K for the period ended Dec 31, 2019
Filed with the SEC on Mar 30, 2020 and accepted by EDGAR at Mar 30, 2020, 16:16 ET.
Business
As filed, 24,460 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.
Overview
Envision is a sustainable technology innovation company based in San Diego, California. We invent, design, engineer, manufacture and sell solar powered products that enable vital and highly valuable services in locations where it is either too expensive or too impactful to connect to the utility grid, or where the requirements for electrical power are so important that grid failures, like blackouts, are intolerable. When competing with utilities or typical solar companies, we rely on our products’ deployability, reliability, accessibility, portability and total cost of ownership, rather than simply producing the cheapest kilowatt hour with the help of subsidies as most competing solar companies do.
Envision’s solar powered products and proprietary technology solutions target three markets that are experiencing significant growth with annual global spending in the billions of dollars.
- electric vehicle charging infrastructure;
- outdoor media advertising; and
- energy security and disaster preparedness.
The Company focuses on creating renewable, high-quality products for electric vehicle (“EV”) and drone charging, outdoor media and branding, and energy security that are rapidly deployable and attractively designed. We believe that there is a clear need for a rapidly deployable and highly scalable EV charging infrastructure, and that our EV ARC™ and Solar Tree™ products fulfill that requirement. We are agnostic as to the EV charging service equipment (“EVSE”) as we do not sell EV charging, rather we sell products which enable it. Our EV ARC™ and Solar Tree™ products replace the infrastructure required to support EV chargers, not the chargers themselves.
We believe our chief differentiators are:
- our ability to invent, design, engineer, and manufacture solar powered products which dramatically reduce the cost, time and complexity of the installation and operation of EV charging infrastructure and outdoor media platforms when compared to traditional, utility grid tied alternatives;
- our products’ capability to operate during grid outages and to provide a source of emergency power rather than becoming inoperable during times of emergency or other grid interruptions; and
- our ability to create new and patentable inventions which are marketable and a complex integration of our own proprietary technology and parts, and other commonly available engineered components, creating a further barrier to entry for our competition.
Products and Technologies
Electric vehicle charging infrastructure
The product lines below incorporate the same underlying technology and value, having a built-in renewable energy source in the form of attached solar panels and/or light wind generator, along with battery storage.
- EV ARC™ (Electric Vehicle Autonomous Renewable Charger) – Our most popular product, we believe this patented product is the world’s first and only transportable, solar powered EV charger on the market. The EV ARC™ produces and stores all its own energy and supports Level I, Level II and DC Fast Charging (requiring 4 to 7 interconnected units). It does not need a grid connection and therefore needs no trenching, switch gear, or transformer upgrades. Because there is no foundation, trench or electrical infrastructure, the EV ARC™ typically does not require a building or any other kind of permit, and it is easily transportable if a different location is desired. EV ARC™ products can charge between one and six EVs simultaneously and a single unit can provide EV charging to as many as 10 parking spaces.
It is immune to grid interruptions such as black-outs or brown-outs. There are no utility bills to pay and, as the number of EVs increase on the host campuses, more EV ARC™ units can be added without disruption. Current grid tied EV chargers are often placed in locations where a suitable circuit is most easily accessed, whereas these units are not connected and can be placed anywhere, making it a rapidly deployable and highly scalable EV charging infrastructure.
In 2019, we began deploying an upgraded version of our EV ARCTM, the EV ARCTM 2020, which provides all of the features of the original EV ARCTM in addition to elevating the electronics under the solar canopy to make the unit flood-proof up to nine feet. Also in 2019, we deployed our first EV ARC™ DC Fast Charging units that provide a 50kW DC fast charge which provides up to 1,100 miles per day to one or more electric vehicles. We are also working with a partner to develop inductive charging as a feature to offer to our customers. A patent has been filed for this technology.
- SolarTree® Products – This patented product has been in deployment for several years and is used in larger scale solar powered EV charging applications. We believe our Solar Tree® product to be the only single column, sun tracking, and architectural solar support structure with integrated energy storage, EV charging and media platforms available today. Because our products do not require a connection to the electrical grid, they can be rapidly deployed and enable EV charging in locations where it would otherwise be impossible or economically infeasible, such as rest areas and park and ride locations. The costs and environmental impact associated with delivering a 50kW or greater circuit to a remote rest area may be prohibitive, whereas a Solar Tree® DCFC can be deployed with minimal site disturbance.
We believe Solar Tree® products with on-board battery storage can provide a highly reliable source of energy to provide emergency power to users such as first responders during times of emergency or other grid failures. We also believe that Solar Tree® products optimized for branding can create visually stunning platforms for the delivery of a business’ brand message with a less onerous planning and entitlement process than that experienced with traditional signage.
- EV-Standard™ Product – On December 31, 2019, the patent for this product was issued. The EV-Standard™ is currently in development and will use an existing streetlamp’s foundation and grid connection and transforms it into a solar and wind-powered Level II EV charger for “curbside” or “on street” charging. The EV-Standard™ design includes a light-wind generator fixed atop a new streetlamp. Also integrated is a tracking solar panel and on-board battery storage. The EV-Standard™ product design takes power from the existing streetlamp grid connection and uses it to charge the on-board batteries.
- UAV ARC™ drone charging product – This product is awaiting patent approval and is currently in development. The UAV ARC™ is a rapidly deployable, highly scalable, range extending drone recharging product which forms a network. It does not require any fueling or grid connection because it generates and stores all of its own energy from renewable sources.
Outdoor Media Advertising
As the value of traditional advertising media such as television, radio, and print diminishes, advertisers in the United States and abroad are looking for new outlets to capture the attention of consumers. Industry experts believe that there will be significant growth in spending on outdoor advertising platforms particularly when mounted on street furniture. We believe the digital out of home industry (“DOOH”) is enjoying a period of rapid growth and may continue to do so for the foreseeable future. Management has been working with a large well-established company, Outfront Media (“OUT”), in the outdoor advertising space to place outdoor content on Envision’s infrastructure products. These advertising companies sell advertising to a company, and the proceeds would then be used to fund the delivery of EV ARCs, which would be placed in visible locations and would display the advertisements. This is a growing area with companies such as Google joining the outdoor digital content placement market.
Energy Security and Disaster Preparedness
Power outages cost the United States $150 billion per year according to the Department of Energy. Our solar powered products include battery energy storage and can dispatch power during times of grid or hydrocarbon fueled generator failure. As our focus is on creating products from the combination of solar power generation and energy delivery and storage, we view the competition from companies producing these types of solutions to be most relevant to our business. Companies in this space range from small startup companies like Green Charge Networks to behemoths like General Electric and NEC. Siemens, Eaton, Schneider and other large electrical component companies are all also working on combined renewables/storage product solutions. We are in contact with all these companies and have not observed that any of them have a product which provides all the same value and differentiation that our EV ARC™ product delivers.
Strategy
Target Markets
Envision’s markets consist of five broad segments: State, Municipal, Federal, Enterprise and International. These segments can further be broken down into increasingly granular segments as different market opportunities are identified. Envision’s largest market is currently Municipal.
Envision’s biggest customer is the City of New York followed by the State of California which is a conglomeration of California state agencies and municipalities. Currently the most attractive markets for Envision are New York, California and Colorado. The factors below are considered in determining favorable markets for our products:
- Political Factors. Political statements, mandates and laws supporting and driving policy to reduce carbon emissions through the electrification of transportation. State and local governments focusing on the transportation industry and the electrification of fleet vehicles to reduce carbon emissions.
- Economic Factors. The use of grants and incentives to advance the adoption of EVs and EV charging infrastructure. Regions with difficult, time consuming permitting and regulatory requirements and high construction costs.
- Sociocultural Factors. High concentration of EV drivers and a cultural desire to be good stewards of the environment.
- Technological Factors. Regions with good insolation, expensive energy costs, and poor or degraded air quality, and a lack of capacity or expensive upgrade requirements for their utility grid.
Growth Strategy
The electric vehicle market is expected to grow at a rapid pace. According to Goldman Sachs, the EV infrastructure market is expected to receive investments of $6 trillion to set up the infrastructure around green cars. Bloomberg forecast 559M EVs on the road by 2040. We currently operate in three rapidly growing: EV charging infrastructure, outdoor media advertising and energy security and disaster preparedness. Our products are being used in 21 U.S. states, 106 municipalities, two international countries, and the U.S. Virgin Islands in the Caribbean. We believe that our products have a global appeal and that we are only at a nascent period in the development of our sector. We believe that our strategic growth plan will enable us to increase our user base and revenues while leading to increased profitability in the following manners:
- Increased sales and marketing to educate our universe of potential customers.
- Continue to expand our geographic footprint and customer base.
- Enhance our gross margins by focusing on increased sales, improved operating efficiencies and reduced cost of materials and production.
- Increased leverage of outsourcing as our manufacturing process scales.
- Expansion of our recurring revenue business.
- Try to utilize federal grants to provide funding opportunities for our customers
- Capture market share of the electrified personal and public transportation space, which is at a nascent phase.
- The network effect (IoT) will drive significant value from the data we collect.
- Continued expansion of our Outdoor Media Business unit.
- Develop and innovate new products while building a strong IP portfolio.
Sales and Marketing
Envision utilizes an in-house sales team and sells through a direct sales and marketing channel, pairing customers with sales specialists to ensure their needs are met. The Company hired a new Vice President of Sales and Marketing on January 1, 2020 who currently leads the team.
We have found that our sales process is heavily focused on educating prospective customers about our product so they are aware that they have options, before they go down the path of a traditional grid-tied solution. As a result, we have begun investing more in marketing materials and videos, as well as a publicist to help us to educate the market. Envision uses research to identify potential customers, as well as contacts established through trade show events and in-bound calls. We also utilize a combination of regional and industry focused campaigns, nurturing campaigns, speaking opportunities, product demonstrations, press releases and social media (Facebook, Instagram, Twitter, and LinkedIn). Envision is, we believe, an industry leader in the EV charging infrastructure space and the website will be used to highlight that with webinars and industry news to automate the education of our markets helping them confidently make an informed decision about the purchase of our products. Presentation and execution will continue to remain a priority and we will keep sales and marketing materials updated to ensure messaging is on point and consistent with our product offering, customer’s needs and industry standards.
Envision products have a long sales cycle. This is a sophisticated sale and often a large capital expense for our customers. Sales often hinge on bureaucratic processes and funding approval. Political mandates do not always equal availability of resources to execute policy into action. We also utilize a consultant to support our customers with the federal grant process to identify grants that may be available to reduce the cost of their purchase.
Major Customer Contracts
In 2019 and 2018, we have had two major customers, the State of California and the City of New York, that have accounted for a substantial portion of our revenue.
City of New York Requirement Contract. The Company entered into a Requirement Contract with the City of New York (the “NY Contract”) on April 17, 2017 that extends through April 16, 2021. We have received 2 purchase orders to date on this contract. The first was for 36 EV ARCs™ and one ARC Mobility™ trailer, all of which were delivered in 2017 and 2018, for a total contract price of $2,416,356. On September 10, 2018, the Company received a new $3,300,000 order from the City of New York for 50 EV ARC™ units which the Company delivered 16 such units during 2018 and 34 units in the first half of 2019.
Contract with the California Department of General Services. On June 12, 2015, the Company’s bid for solicitation was accepted by the California Department of General Services (the “California Contract”). The term of the California Contract was initially for one year with two extension options for one year. In June 2018, the California Contract was renewed for up to four more years (two years with two additional one-year options), and its scope was expanded to include more of our products, including our EV ARC™ HP DC Fast Charging Electric Vehicle Autonomous Renewable Charger, with a California estimated value of over $20 million. The California Contract permits California state and local government agencies, including cities, counties, special districts, California State universities, University of California systems, K-12 school districts, and community colleges, to purchase EV ARCs™, ARC Mobility Trailers, and related accessories from the Company. The Company has sold a cumulative total of 38 EV ARCsTM for a total of $2,365,844 through December 31, 2017, a cumulative total of 58 EV ARCs™ for a total of $3,610,980 through the fiscal year ended December 31, 2018 and a cumulative total of 64 EV ARCs™ for a total of $3,970,434 through the fiscal year ended December 31, 2019 and there are an additional 11 EV ARCs™ totaling $1,178.909 in backlog at December 31, 2019.
Competitors
We are not aware of other companies that provide an infrastructure product similar to ours, utilizing solar energy to power EV charging. We are, however, subject to competition from a number of companies which are involved in the design, construction and installation of fixed grid-connected EV charging stations that depend on the utility grid for a source of power, and on the construction and civil and electrical engineering services for the installation of traditional infrastructure. Our challenge is to market our products to ensure that potential customers are aware of our product offering.
Competition in the solar renewable energy and EV charging industries is intense, and competition is fragmented among a wide variety of entities. Companies such as Schneider, Eaton, AeroVironment, and Bosch manufacture EV charging units but do not offer charging services. There are many companies which offer installation services for the EV charging market. They are typically from electrical and general contracting backgrounds as well as some larger project management firms such as Black and Veatch, Bechtel, CH2M Hill and AECOM. Companies such as Chargepoint and Blink (NASDAQ: BLNK) offer EV charging services and hardware but not, typically, installation. Our EV ARCTM units will incorporate whatever charger the customer wants, so in most cases, we are not competing with the charger company, but rather creating opportunities for them which they might not otherwise have had.
Volta is a privately held San Francisco based EV charging company which derives revenue through the sale of advertising. Volta gives charging away for free. They are deployed in a small number of shopping malls and other locations. Many solar companies are now fixing EV chargers to their parking lot structures and some are offering packages combining solar rooftop installations and EV charger installations for the residential marketplace. These installations are almost always grid tied and do not include energy storage.
Another example of an entity which is providing free or discounted EV charging infrastructure is Electrify America, the EV charging provider is required to spend approximately $2B on EV charging infrastructure ($800M in California) to satisfy the requirements of a settlement with the U.S. government.
We also face competition, to some extent, from entities which are offering free or discounted EV charging infrastructure to our prospective customers. Utilities such as the three large IOUs (investor owned utilities) in California (SDG&E, PG&E, SCE) have successfully lobbied the California Public Utility Commission for permission to rate base the costs of installations of EV chargers. As a result, they can offer the installation, or “make readies” of electrical circuits and other civil infrastructure, for a lower price or in some instances for free, to certain customers.
Our competitive advantage over these other solutions includes:
- Rapid deployability and scalability of our products. Our products offer a turnkey product solution that can be manufactured in our facility and delivered to a customer and installed in minutes. This competes with an entire ecosystem involving the design, engineering, permitting and constructing of civil projects which requires engaging a company, or group of companies, including architects, civil engineers, electrical engineers, zoning specialists, consultants, general contractors, electrical contractors, and EVSE vendors. These grid-tied projects can take 6 months – 1.5 years.
- Lower total cost of ownership. Envision’s products are powered using the sun. As a result, there is no charge for on-going energy to power vehicles.
- Ability to operate during blackouts and brownouts. In addition, most units provide an emergency power panel that can be used for emergency power to charge other devices and emergency equipment during outages. If a customer was connected to the grid, they would not have power.
- Because a grid connection is not required, Envision’s EV ARC can be located anywhere, including remote locations that are hard to connect to a grid.
- Environmentally sound product using clean energy.
- Envision products can be relocated which gives the customer the flexibility to move it if a job site changes or business needs change. Grid tied installations are a permanent solution.
- We offer EnvisionTrak™ (patented) which causes the solar array to follow the sun, generating up to 25 percent more electricity than a fixed array.
- Envision offers a product that delivers DC fast charging solely from solar generation, which we have not seen in the market to date.
Manufacturing
We are headquartered in San Diego, California in a leased 50,000 square foot building professionally equipped to handle the significant growth possibilities we believe are in front of us. The facility houses our corporate operations, sales, design, engineering and product manufacturing.
All of our products are currently designed, developed and manufactured in this facility. We have been able to reduce our costs and improve our quality by performing fabrication in-house. This also provides a good environment for improving the manufacturing process as well as for the development of new products. Many of our suppliers are local which allows for shorter lead times and lower transportation costs. The EV ARC™ product family requires no field installation work and is typically delivered to the customer site by us or by a third-party transportation company for a fee. We sell our Solar Tree® products as an engineered kit of parts to be installed by third parties employed by the buyer of the Solar Tree® kit.
We continually endeavor to reduce component costs and make production improvements in both our products and our processes to reduce our manufacturing costs, while maintaining the high quality for which we strive. As unit sales continue to increase, we will be able to spread our fixed overhead costs over more units, reducing the cost per unit and management believes that gross profits will be realized and maintained.
Customer Concentration
During 2019, the Company had two customers, the City of New York and Monterey Bay Air Resources District that represented 44% and 22% of our revenue, respectively.
Backlog
Our backlog at December 31, 2019 was $2.0 million. Reported backlog represents firm purchase orders or contracts received by customers for deliveries scheduled in the future.
Government Regulation
Businesses in general and solar energy companies in particular are subject to extensive regulation at the federal, state, and local level. We are subject to extensive government regulation of employment, health, safety, working conditions, labor relations, and the environment in the course of the conduct of our business. In order for our customers to enable the installation of some of our products, they generally are required to obtain permits from local and other governmental agencies. In the case of our grid tied products, they must comply with the applicable rules and regulations of the relevant state public utility agencies. In order for our customers to take advantage of available tax and other governmental incentives associated with the installation of solar power production facilities, and the production and use or sale of solar power, they must comply with the applicable regulatory terms and conditions. Changes or new government regulation may have a material adverse impact on our business, operating results, and financial condition.
Employees
As of the date of this report, we have 26 employees, and 9 additional temporary employees. The temporary employees are retained through a temporary employment agency and work for us on a full-time basis but were hired through an agency to maximize our flexibility and to reduce the risks and costs associated with full time employees. We believe our employee relations to be good. None of our employees are represented by a labor union or collective bargaining agreement.
Seasonality
Our operations are generally not materially affected by seasonality.
Risk factors
As filed, 40,710 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.
You should carefully consider the following risk factors, in addition to the other information contained in this report on Form 10-K, including the section of this report titled “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our financial statements and related notes. If any of the events described in the following risk factors and the risks described elsewhere in this report occurs, our business, operating results and financial condition could be seriously harmed. This report on Form 10-K also contains forward-looking statements that involve risks and uncertainties. Our actual results could differ materially from those anticipated in the forward looking statements as a result of factors that are described below and elsewhere in this report.
Our Company recently emerged from its late development stage, which increases the risk of investment in our securities. An investment in us is speculative because while our sales are generally trending up, they are very inconsistent and fluctuate based on the timing of orders and deliveries so it’s difficult to predict a future trend. Funding is needed to expand our sales and marketing campaigns for current markets and to extend the business into new markets, such as China and Europe. We must also allocate capital, if available, to pay costs and liabilities until we achieve positive cash flow, of which there is no assurance. Historically, we have not been profitable and there is no assurance that the Company will be profitable in the future. The Company may not be able to successfully develop, manage, or market its products and services. Intense competition and. government regulation may hinder the Company’s performance. The Company is exposed to other risks inherent in its business.
We have sustained recurring losses since inception and expect to incur additional losses in the foreseeable future. We were formed on June 12, 2006 and have reported annual net losses since inception. For our fiscal years ended December 31, 2019 and December 31, 2018, we experienced net losses of $3,933,922 and $3,598,780, respectively (reflects cash and noncash expenses under generally accepted accounting principles). Further, as of December 31, 2019, we had an accumulated deficit of $45,809,581 (reflects cash and noncash expenses under generally accepted accounting principles). In addition, we expect to incur additional losses in the future, and there can be no assurance that we will achieve profitability. Our future viability, profitability and growth depend upon our ability to raise capital and successfully operate and expand our operations. We cannot assure that any of our efforts will prove successful or that we will not continue to incur operating losses.
We may need to raise additional capital or financing to continue to execute and expand our business. We expect that the net proceeds from the public offering in 2019 will be sufficient to sustain our operations for at least the next twelve months, until we are able to generate positive cashflow through our operations. However, we may need to raise additional capital to fund investment in our business or if it takes longer than expected to achieve positive cashflow. We may be required to pursue sources of additional capital through various means, including sale and leasing arrangements, and debt or equity financings. If the amount of capital we are able to raise from financing activities, together with our revenues from operations, is not sufficient to satisfy our capital needs, we may have to reduce our operations accordingly.
Our revenues decreased in 2019 compared to 2018 which may be indicative of our future results. Our revenues for the year ended December 31, 2019 were $5,111,545 compared to $6,162,402 for the same period in 2018. These revenues were primarily derived from the delivery of 65 EV ARC™ units during 2019, compared to 90 units delivered in 2018. The reduction of revenue was primarily due to slowed spending on sales and marketing due to lack of funding in early 2019 and delays in the closing of orders due to the approval process within U.S. municipalities. Our revenues tend to fluctuate, so you should not rely on our results for 2019 as an indication of our expected performance in 2020 or future periods.
We face risks related to Novel Coronavirus (COVID-19) which could significantly disrupt our manufacturing, research and development, operations, sales and financial results. Our business may be adversely impacted by the effects of the Novel Coronavirus (COVID-19). In addition to global macroeconomic effects, the Novel Coronavirus (COVID-19) outbreak and any other related adverse public health developments may cause disruption to our business operations and sales activities. Our employees, suppliers and customers have been and will be disrupted by absenteeism, quarantines and restrictions on employees’ ability to work, office and factory closures, delays on deliveries, or other travel or health-related restrictions. Depending on the magnitude of such effects on our manufacturing, or the operations of our suppliers, manufacturing and product shipments will be delayed, which could adversely affect our business, operations. In addition, the Novel Coronavirus (COVID-19) or other disease outbreak will in the short-run, and may over the longer term, adversely affect the economies and financial markets within the U.S., resulting in an economic downturn that will affect demand for our products, impact our operating results, and have a negative impact on our stock price. There can be no assurance that any decrease in sales resulting from the Novel Coronavirus (COVID-19) will be offset by increased sales in subsequent periods. Although the magnitude of the impact of the Novel Coronavirus (COVID-19) outbreak on our business and operations remains uncertain, the continued spread of the Novel Coronavirus (COVID-19) or the occurrence of other epidemics will adversely impact our business, financial condition, operating results and cash flows. Currently, we believe we are exempt to the “shelter at home” order issued by the State of California because we provide energy and transportation resources which we believe are considered essential services. However, there is a high likelihood that we will experience disruptions to our business operations resulting from quarantines, self-isolations, or other restrictions on the ability of our employees to perform their jobs that may impact our ability to manufacture and deliver products.
Our revenues are concentrated in a small number of customers and they may decrease significantly if we were to lose one of these customers. One customer, the City of New York, generated 44% and 50% of our revenues in 2019 and 2018, respectively and one customer, Monterey Bay Air Resources District, was 22% of our revenues in 2019. We have contracts with the City of New York and the State of California which can be used by a diverse group of state and local agencies for the purchase of our products. The receipt of orders under these contracts has been irregular and can create fluctuation in our revenues. In addition, there is no obligation for these customers to purchase any additional units, or to renew the contracts when they expire. The City of New York just renewed their contract through April 16, 2021. The State of California contract terminates in July 2020 with two one-year options to renew at their election. If either of these customers significantly reduced their purchases or terminates their contracts, our results of operations would be adversely affected.
Our revenue growth depends on consumers’ willingness to adopt electric vehicles. Our growth is highly dependent upon the adoption of electric vehicles (“EV”), and we are subject to a risk of any reduced demand for EVs. If the market for EVs does not gain broad market acceptance or develops more slowly than we expect, our business, prospects, financial condition and operating results may be harmed. The market for alternative fuel vehicles is relatively new, rapidly evolving, characterized by rapidly changing technologies, price competition, additional competitors, evolving government regulation and industry standards, frequent new vehicle announcements, long development cycles for EV original equipment manufacturers, and changing consumer demands and behaviors. Factors that may influence the purchase and use of alternative fuel vehicles, and specifically EVs, include:
- perceptions about EV quality, safety (in particular with respect to lithium-ion battery packs), design, performance and cost, especially if adverse events or accidents occur that are linked to the quality or safety of EVs;
- the limited range over which EVs may be driven on a single battery charge and concerns about running out of power without access to sufficient charging infrastructure;
- improvements in the fuel economy of the internal combustion engine;
- the environmental consciousness of consumers;
- volatility in the cost of oil and gasoline;
- consumers’ perceptions of the dependency of the U.S. on oil from unstable or hostile countries and the impact of international conflicts;
- government regulations and economic incentives promoting fuel efficiency and alternate forms of energy;
- access to charging stations and consumers’ perceptions about convenience and cost to charge an EV; and
- the availability of tax and other governmental incentives to purchase and operate EVs or future regulation requiring increased use of nonpolluting vehicles.
The influence of any of these factors may negatively impact the widespread consumer adoption of EVs, which could materially adversely affect our business, operating results, financial condition and prospects.
We face intense competition, and many of our competitors have substantially greater resources than we do. We are not aware of other companies that provide a similar infrastructure product that we do, utilizing solar energy to power EV charging. However, we compete with traditional grid-tied charging stations. Our challenge is to market our products in the industry to ensure that potential customers in this industry are aware of our product offering. Competition in the solar renewable energy and EV charging industries is intense, and competition is fragmented among a wide variety of entities. We operate in a highly competitive environment that is characterized by price fluctuations and rapid technological change. Our competitors often have greater market recognition and substantially greater resources than we do. Competition for RFPs, and in our market in general, may intensify in the future. Competitors may develop products based on new solar power technologies that may ultimately have costs similar to, or lower than, our projected costs. If we fail to compete successfully, our business would suffer and we may lose or be unable to gain market share and our business and results of operations would be adversely affected.
The solar energy industry and in particular, as it is utilized for EV charging, is an emerging market that is constantly evolving and may not develop to the size or at the rate we expect. The solar energy industry, especially as it applies to EV charging, is an emerging and constantly evolving market. We believe the industry will take several years to fully develop and mature, and we cannot be certain that the market will grow at the rate we expect. Any future growth of the solar energy market in general, and for EV charging in particular, and the success of our products depend on many factors beyond our control. These factors include without limitation recognition and acceptance of EVs and EV charging products by customers and users, the pricing of alternative sources of energy, a favorable regulatory environment, the continuation of expected tax benefits and other incentives and our ability to provide our product offerings cost-effectively. If the markets for EV charging do not develop at the rate we expect, our business may be adversely affected.
Tariffs imposed pursuant to Section 201 of the Trade Act of 1974 could significantly and adversely affect our business, revenues, margins, results of operations, and cash flows. We currently only use solar panel modules purchased from SunPower for our products. In April 2018, SunPower acquired SolarWorld, one of the petitioners in the Section 201 trade case that led to the new tariffs referred to below, and a company which is, as such, exempt from those tariffs. Sunpower also garners an exemption for the tariffs because of the unique nature of its modules. We do not buy or use, nor do we intend to buy or use, any of the targeted modules. Since we currently only purchase SunPower modules for our products, we are not currently affected by those tariffs, although there can be no assurance that we may not be affected by any future tariffs on SunPower products or otherwise. On January 23, 2018, the President of the United States issued Proclamation 9693, which approved recommendations to impose safeguard tariffs on imported solar cells and modules, based on the investigations, findings, and recommendations of the U.S. International Trade Commission (the “International Trade Commission”).
It is possible that tariffs may increase the costs and restrict the supply of certain of our components, causing us harm. In the near term, uncertainty surrounding the potential implications of the tariffs imposed on the U.S. solar market, and whether specific products may be excluded, may cause market volatility, price fluctuations, supply shortages, and project delays. In addition, the imposition of tariffs is likely to result in a wide range of impacts on the targeted U.S. industries and the global market in general. Such tariffs, if our products or the parts we use to manufacture our products are ultimately determined to be subject to them, could result in significant additional costs to us. If we elected to pass such increase in costs on to our customers, they could cause a significant reduction in demand for our products. We currently have no plans to use modules which are subject to tariffs.
Existing regulations and policies and changes to these policies may present technical, regulatory, and economic barriers to the purchase and use of solar power products, which may significantly reduce demand for our products and services. The market for electric generation products is heavily influenced by federal, state and local government laws, regulations and policies concerning the electric utility industry in the United States and abroad, as well as policies adopted by electric utilities. Changes that make solar power less competitive with other power sources could result in a significant reduction in the demand for our products. The market for electric generation equipment is also influenced by trade and local content laws, regulations and policies that can discourage growth and competition in the solar industry and create economic barriers to the purchase of solar power products, thus reducing demand for our products. Any new regulations or policies pertaining to our products may result in significant additional expenses to us, which could cause a significant reduction in demand for our solar power products.
In high demand locations, the use of our products could exhaust their electricity supply on particular days, even with our storage batteries. Our solar products create and store electricity during daylight hours. While this process has generally been effective to meet daily EV charging and energy storage demand, it is possible that heavy charging could cause a power draw exceeding the onboard electricity generation and storage capacity. In such instances, except for our grid-connected products, the EV charger would have to recharge through solar energy replenishment or other direct outside charge before EV charging could resume.
Developments in alternative technologies or improvements in distributed solar energy generation may have a material adverse effect on demand for our offerings. Significant developments in alternative technologies, such as advances in other forms of distributed solar power generation, storage solutions, such as batteries, the widespread use or adoption of fuel cells for residential or commercial properties or improvements in other forms of centralized power production, transmission and distribution, may have a material adverse effect on our business and prospects. Any failure by us to adopt new or enhanced technologies or processes, or to react to changes in existing technologies, could result in product obsolescence, the loss of competitiveness of our products, decreased revenue and a loss of market share to competitors.
Defects or performance problems in our products could result in loss of customers, reputational damage, and decreased revenue, and we may face warranty, indemnity, and product liability claims arising from defective products. Although our products meet our stringent quality requirements, they may contain undetected errors or defects, especially when first introduced or when new generations are released. Errors, defects, or poor performance can arise due to design flaws, defects in raw materials or components or manufacturing difficulties, which can affect both the quality and the yield of the product. Any actual or perceived errors, defects, or poor performance in our products could result in the replacement or recall of our products, shipment delays, rejection of our products, damage to our reputation, lost revenue, diversion of our engineering personnel from our product development efforts, and increases in customer service and support costs, all of which could have a material adverse effect on our business, financial condition, and results of operations.
We may be subject to product liability claims. If one of our products were to cause injury to someone or cause property damage, including as a result of product malfunctions, defects, or improper installation, then we could be exposed to product liability claims. We could incur significant costs and liabilities if we are sued and if damages are awarded against us. Further, any product liability claim we face could be expensive to defend and could divert management’s attention. The successful assertion of a product liability claim against us could result in potentially significant monetary damages, penalties or fines, subject us to adverse publicity, damage our reputation and competitive position, and adversely affect sales of our products. In addition, product liability claims, injuries, defects, or other problems experienced by other companies in the solar industry could lead to unfavorable market conditions for the industry as a whole, and may have an adverse effect on our ability to attract new customers, thus harming our growth and financial performance.
If we are unable to keep up with advances in EV technology, we may suffer a decline in our competitive position. The EV industry is characterized by rapid technological change. We do not manufacture the EV service equipment (EVSE) which connects to the EV, rather, we deliver power to other vendors’ EVSE products. As such, we believe that we are less prone to impacts caused by changes in EV technology. Nevertheless, if we are unable to keep up with changes in EV technology or the costs associated with such changes, our competitive position may deteriorate which would materially and adversely affect our business, prospects, operating results and financial condition. As technologies change, we plan to upgrade or adapt our EV products in order to continue to provide EV charging services with the latest technology.
If a third party asserts that we are infringing upon its intellectual property, it could be costly and time-consuming litigation, and our business may be harmed. The EV and EV charging industries are characterized by the existence of a large number of patents, copyrights, trademarks and trade secrets. Although we are not presently aware of any current or threatened third party intellectual property rights claims against the Company, there is a risk that the Company could face third party intellectual rights claims against its products and challenges to the validity or enforceability of its products and trademarks in the future which could harm our relationships with our customers, may deter future customers from subscribing to our services or could expose us to litigation with respect to these claims.
The success of our business depends in large part on our ability to protect and enforce our intellectual property rights. We rely on a combination of patent, copyright, service mark, trademark, and trade secret laws, as well as confidentiality procedures and contractual restrictions, to establish and protect our proprietary rights. We cannot assure you, however, that we will be successful in obtaining these patents, service marks or trademarks, or that these applications will not be challenged, that others will not attempt to infringe upon our rights, or that these filings will afford us adequate protection or competitive advantages. If we are unable to protect our rights to our intellectual property or if such property infringes on the rights of others, our business could be materially adversely affected.
The success of our business depends on the continuing contributions of Desmond Wheatley and other key personnel who may terminate their employment with us at any time, and we will need to hire additional qualified personnel. We rely heavily on the services of Desmond Wheatley, our chairman and chief executive officer, as well as other management personnel. Loss of the services of any such individuals would adversely impact our operations. In addition, we believe our technical personnel represent a significant asset and provide us with a competitive advantage over many of our competitors. Our future success will depend upon our ability to retain these key employees and our ability to attract and retain other skilled financial, engineering, technical and managerial personnel. A “key man” life insurance policy was established for Mr. Wheatley in March 2020, which will help to mitigate some of this risk.
If we are unable to attract, train and retain highly qualified personnel, the quality of our services may decline and we may not successfully execute our growth strategies. Our success depends in large part upon our ability to continue to attract, train, motivate and retain highly skilled and experienced employees, including technical personnel. The loss of personnel or our inability to hire or retain sufficient personnel at competitive rates of compensation could impair our ability to secure and complete customer engagements and could harm our business.
We are exposed to risks associated with a potential financial crisis and weaker global economy, which increase the uncertainty of financing and the risk of non-payment from customers. Potential turmoil in the financial markets, and a potentially weakened global economy would contribute to slowdowns in the renewable energy industry, which may worsen if these economic conditions are prolonged or deteriorate further. The market for the installation of our products depends largely on commercial and government capital spending. Economic uncertainty exacerbates negative trends in these areas of spending, and may cause our customers to delay, cancel, or refrain from placing orders, which may reduce our sales. If we are unable to timely and appropriately adapt to changes resulting from the difficult macroeconomic environment, our business, financial condition and results of operations may be materially and adversely affected.
We are exposed to various possible claims and hazards relating to our business, and our insurance may not fully protect us. Although we maintain modest theft, casualty, liability, cyber and property insurance coverage, along with worker’s compensation and related insurance, we cannot assure that we will not incur uninsured liabilities and losses as a result of the conduct of our business. In particular, we may incur liability if one or more of our other products are deemed to have caused a personal injury. Should uninsured losses occur, they would have a material adverse effect on our operating results, financial condition, and business performance.
We may face litigation in the future. As a manufacturer and seller of goods, we are exposed to the risk of litigation for a variety of reasons in addition to reasons relating to intellectual property rights, including product liability lawsuits, employee lawsuits, commercial contract disputes, government enforcement actions, and other legal proceedings. We cannot assure that future litigation in which we may become involved will not have a material adverse effect on our financial condition, operating results, business performance, and business reputation.
We may incur liabilities which we are unable to pay. We have liabilities and may in the future have other liabilities to affiliated or unaffiliated lenders. These liabilities represent fixed costs, which are required to be paid regardless of the level of business or profitability experienced by Envision. We cannot assure that we will not incur more debt in the future, that we will have sufficient funds to repay our indebtedness or that we will not default on our debt, jeopardizing our business viability. Furthermore, we may not be able to borrow or raise additional capital in the future to meet our needs or to otherwise provide the capital necessary to conduct our business. We cannot ensure that we will be able to pay our liabilities, that we will successfully extend their maturity dates, if necessary, or that we will not experience a default on our indebtedness.
The costs incurred by us to develop and manufacture our products may be higher than anticipated which could hurt our ability to earn a profit. We may incur substantial cost overruns in the development, manufacture, and distribution of products. Unanticipated costs may force us to obtain additional capital or financing from other sources and would hinder our ability to earn a profit. If we incur cost overruns, there is no assurance that we could obtain the financing or capital to cover them. If a greater investment in the business is required because of cost overruns, the probability of earning a profit or a return of the shareholders’ investment in Envision is diminished.
Our failure to meet our financial obligations could subject our business to liens. If we fail to pay for materials and services for our business on a timely basis, our assets could be subject to materialmen’s and workmen’s liens. We may also be subject to bank liens in the event that we default on loans from banks, if any.
The equipment comprising our products currently charge at rates that are comparable to the average charging speed of competitors, but that may change in the future. Our standard EV ARC™ as a stand-alone does not provide a DC Fast Charge, rather, it charges EVs at a Level II pace which is consistent with the majority of installed EV chargers in the U.S. To date, we have found that since most EV trips are relatively short and local, the standard EV ARC™ has satisfied consumer demand. Our EV ARC™ HP DC Fast Charging Electric Vehicle Autonomous Renewable Charger can provide a DC Fast Charge, so we believe we can compete in that market. Nevertheless, the demand for faster EV charging may increase in the future, requiring us to adjust our marketing and sales strategies. There is no assurance that our equipment will remain competitive in the market in the future, causing possible customer complaints and claims, and the loss of sales in the future.
Our Company depends on key suppliers and outside contractors. The Company depends on key suppliers and outside contractors, such as our solar panel suppliers who manufacture them in Mexico and the Philippines (these suppliers moved their manufacturing locations to their factories in Mexico and the Philippines from their original factory locations in California and Malaysia), whose failure to perform could hinder our ability to operate profitably and have a material adverse impact on our operating results, financial condition, and business performance. We source important components from a variety of suppliers in the United States, Germany and Mexico. We license certain computer software from third parties, including our proprietary EnvisionTrak™ solar panel tracking system. We do not own that software. While we believe that we can secure substitute suppliers for our components, it could be expensive and time consuming to replace any of them if we had to do so, especially for important computer software.
We have experienced technological changes in our industry. New technologies may prove inappropriate and result in liability to us or may not gain market acceptance by our customers. The industries in which we operate are subject to constant technological change. Our future success will depend on our ability to appropriately respond to changing technologies and changes in function of products and quality. If we adopt products and technologies that are not attractive to consumers, we may not be successful in capturing or retaining a significant share of our market. In addition, some new technologies are relatively untested and unperfected and may not perform as expected or as desired, in which event our adoption of such products or technologies may cause us to lose money.
Existing regulations, and changes to such regulations, may present technical, regulatory and economic barriers to the purchase and use of our products, which may significantly reduce demand for our products. Installation of a small number of our products is subject to oversight and regulation in accordance with national and local ordinances, building codes, zoning, environmental protection regulation, utility interconnection requirements for metering and other rules and regulations. In particular, our new EV Standard™ product, designed to provide curbside EV charging through existing or newly installed street lampposts owned by municipalities and utilities, will require close cooperation with, and supervision by, local government agencies. We attempt to keep up-to-date about these requirements on a national, state, and local level, and must design systems to comply with varying standards. Certain cities may have ordinances that increase the cost of installation of our products. In addition, new government regulations or utility policies pertaining to power systems are unpredictable and may result in significant additional expenses or delays in the installation of our grid-connected products and, as a result, could cause a significant reduction in demand, especially for our EV Standard™ product.
Our media branding and advertising strategy may not result in a profitable operation of that segment of our business. We are able to equip our EV ARC™ and Solar Tree® platforms with digital advertising screens with content that can be controlled directly, and in some cases, remotely. We may also sell other forms of media across our product platforms, such as naming rights or sponsorship deals, as well as traditional fixed media. There is no assurance that the revenue model crafted for this capability will be successful or profitable or will not result in operating losses or rejection by government regulators or consumers. Sponsors and advertisers for the service may not materialize or be willing to pay the rates sought by us or our customers.
Our business is impacted by the availability to our customers of rebates, tax credits and other financial incentives, the reduction, elimination or uncertainty of which would reduce the demand for our products. Many states offer substantial incentives to offset the cost of solar power systems, battery storage systems and EV charging infrastructure. These incentives can take many forms, including direct rebates, state tax credits, system performance payments and Renewable Energy Credits (RECs). Moreover, the federal government currently offers a 30% tax credit for the installation of solar power systems and associated energy storage systems. Effective in 2009 and currently, the federal tax credit is 30% for commercial and residential installations. There are additional federal grants available that encourage renewable investment. Businesses may also elect to accelerate the depreciation on their systems in the first year of ownership. Uncertainty about the introduction of, reduction in, or elimination of such incentives, or delays or interruptions in the implementation of favorable federal or state laws could substantially increase the cost of our systems to some of our customers, resulting in significant reductions in demand for our products from non-governmental customers, which would negatively impact our sales.
Our business strategy may depend on the widespread adoption of solar power and EV charging technology. The market for solar power products is emerging and rapidly evolving, and its future success is uncertain. If solar power technology proves unsuitable for widespread commercial deployment or if demand for solar power products fails to develop sufficiently, we could be unable to generate enough revenues to achieve and sustain profitability and positive cash flow. The factors influencing the widespread adoption of solar power technology include but are not limited to:
- cost-effectiveness and efficiency of solar power technologies as compared with conventional and non-solar alternative energy technologies;
- performance and reliability of solar power products as compared with conventional and non-solar alternative energy products;
- fluctuations in economic and market conditions which impact the viability of conventional and non-solar alternative energy sources, such as increases or decreases in the prices of oil and other fossil fuels;
- continued deregulation of the electric power industry and broader energy industry; and
- availability of governmental subsidies and incentives.
Compliance with new and existing environmental laws and rules is required. Compliance with new and existing environmental laws and rules could significantly increase construction and start-up costs for our customers, deterring customers from purchasing a small sub-set of our products and services. To install Envision’s Solar Tree® products, our customers may be required to obtain and comply with a number of permitting requirements. As a condition of granting necessary permits, regulators could make demands that increase our customers’ expected costs of construction and operations, in which case they may delay or cancel delivery of certain sub-sets of our products. Environmental issues, such as contamination and compliance with applicable environmental standards could arise at any time during the construction and operation of a customer’s project. If this occurs, it could require a customer to spend additional resources to remedy the issues and may delay or prevent construction or operation of the project. This is why we have focused on the development of autonomous infrastructure products which do not require construction for their deployment.
The success of our sales is dependent upon a continued need for renewable energy. The topic of alternative fuels has retained a significant status in the consciousness of the American people, but interest in developing and utilizing alternative fuels could wane unexpectedly at any time. If such interest were lost or if the demand for alternative fuels were to decrease substantially, the Company could encounter problems generating sufficient revenue to achieve or sustain profitability or meet its working capital requirements.
The success of our product offering may in some instances require the availability of locations provided by municipalities or private owners of real estate. Our ability to sell branding opportunities or licenses could be highly dependent on the availability of real estate to locate our product, or municipal approval for visible branding. We cannot assure that these rights will be available to us in the future or will be available on terms acceptable to us. The lack of availability of these rights could have a material adverse effect on our results of operations and financial condition in our media business unit. We may operate part of our business in which leasing or licensing agreements with venues or municipalities are necessary, so the long-term success of this aspect of our business could depend upon our ability to initiate such agreements and to renew these agreements upon their termination. We cannot assure that we will be able to renew these agreements on acceptable terms or at all, or that we will be able to obtain attractive agreements with substitute venues.
Risks Relating to our Organization and our Common Stock
The Company was formerly a shell company. Because we merged with a non-operating shell company in 2010, our stock that is not registered with the SEC may become subject to certain additional restrictions if we fail in the future to stay current in our reporting requirements with the SEC.
If we fail to establish and maintain an effective system of internal control, we may not be able to report our financial results accurately or to prevent fraud. Any inability to report and file our financial results accurately and timely could harm our reputation and adversely impact the trading price of our common stock. The Company currently does not have manufacturing or purchasing systems in place to track inventory and purchasing transactions or a perpetual inventory system. The Company performs manual processes during the year to track and control our inventory and purchases. While these processes provide good results in determining inventory and cost of sales transactions, as we grow, it has become a very time-consuming process and could impact our ability to submit timely reporting. We plan to invest in new systems in 2020 to automate these functions.
Our stock price may be volatile. The public market trading price of our common stock is likely to be highly volatile, may decline, and could fluctuate widely in response to various factors, many of which are beyond our control, including the following:
- changes in our industry;
- competitive pricing pressures;
- our ability to obtain working capital financing;
- additions or departures of key personnel;
- limited “public float” in the hands of a small number of persons whose sales or lack of sales could result in positive or negative pricing pressure on the market price for our common stock;
- sales of our common stock privately or in the public market, by us or by other shareholders;
- our ability to execute our business plan;
- operating results that fall below expectations;
- loss of any strategic relationship;
- adverse regulatory developments;
- adverse economic and other external factors;
- additional dilution of ownership because of the issuance of new securities by us, and period-to-period fluctuations in our financial condition or operating results.
In addition, the securities markets have from time to time experienced significant price and volume fluctuations that are unrelated to the operating performance of particular companies. These market fluctuations may also materially and adversely affect the market price of our common stock.
Offers or availability for sale of a substantial number of shares of our common stock may cause the price of our common stock to decline. If our stockholders sell substantial amounts of our common stock in the public market, or upon the expiration of any statutory holding period under Rule 144, or issued upon the exercise of outstanding options or warrants, the market price of our common stock could decline because of or in anticipation of the selling pressure. The existence of anticipated sales, whether or not sales have occurred or are occurring, also could make more difficult our ability to raise additional financing through the sale of equity or equity-related securities in the future at a time and price that we deem reasonable or appropriate.
Properties
As filed, 232 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.
Our corporate headquarters are located at 5660 Eastgate Dr., San Diego, California 92121. We lease approximately 50,000 square feet of office and warehouse space pursuant to a four-year sublease that extends through August 30, 2020.
Legal proceedings
As filed, 231 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.
The Company may be involved in legal actions and claims arising in the ordinary course of business from time to time. As of December 31, 2019, and the date of this report, the Company is not involved in any open litigation matters.
Management's discussion and analysis
As filed, 33,109 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.
OVERVIEW:
Envision invents, designs, engineers, manufactures and sells solar powered products and proprietary technology solutions serving three markets with annual global spending in the billions of dollars and that are experiencing significant growth:
- electric vehicle charging infrastructure;
- outdoor media advertising; and
- energy security and disaster preparedness.
The Company focuses on creating renewably energized, high-quality products for electric vehicle (“EV”) charging, outdoor media and branding, and energy security that are rapidly deployable and attractively designed.
We currently produce two categories of products: the patented EV ARC™ (Electric Vehicle Autonomous Renewable Charger) and the patented Solar Tree®. In 2019, we began deploying our upgraded version of our EV ARC™, the EV ARC™ 2020, which provides all of the features of the original EV ARC™ in addition to elevating the electronics under the solar canopy to make the unit flood-proof up to nine feet. In addition, we have two new categories of products in development. On December 31, 2019, our patent for the EV-Standard™ product was issued, and a fourth category of product, the UAV ARC™ drone charging product, is awaiting patent approval. All four product lines incorporate the same underlying technology and value, having a built-in renewable energy source in the form of attached solar panels and/or light wind generator, along with battery storage. The EV ARC™ product is a permanent solution in a transportable format and the Solar Tree® product is a permanent solution in a fixed format. The EV-Standard™ is also fixed but uses an existing streetlamp’s foundation and grid connection for curbside charging. The UAV ARC™ is a permanent solution in a transportable format and will be used to charge drone (UAV) fleets. Our EV charging solutions for electric vehicles and aerial drones can, or in the case of the products currently under development, are expected to, produce, deliver, and store power without the time and expense of having to be connected to the utility grid.
We believe that there is a clear need for a rapidly deployable and highly scalable EV charging infrastructure, and that our products fulfill that requirement. We are agnostic as to the EV charging service equipment and integrate best of breed solutions based upon our customer’s requirements. For example, our EV ARC™ and Solar Tree® products have been deployed with Chargepoint, Blink, Juice Box, Bosch, AeroVironment and other high quality EV charging solutions. We can make recommendations to customers or we can comply with their specifications and/or existing charger networks. Our products replace the infrastructure required to support EV chargers, not the chargers themselves. We do not sell EV charging, rather we sell products which enable it.
We believe our chief differentiators for our electric vehicle charging infrastructure products are:
- our ability to invent, design, engineer, and manufacture solar powered products which dramatically reduce the cost, time and complexity of the installation and operation of EV charging infrastructure and outdoor media platforms when compared to traditional, utility grid tied alternatives;
- our products’ capability to operate during grid outages and to provide a source of emergency power rather than becoming inoperable during times of emergency or other grid interruptions; and
- our ability to create new and patentable inventions which are a complex integration of our own proprietary technology and parts, with other commonly available engineered components, creating a further barrier to entry for our competition.
17
Historically, we have earned revenue primarily from the sale of EV ARCs™ to large commercial businesses, such as Google, Genentech, and Johnson & Johnson, and government agencies such as the City of New York, the State of California and the U.S. Navy. Our contract with the City of New York was renewed in March 2020 to extend through April 2021 and while our State of California contract expires on June 23, 2020 it has two one-year renewal options through June 23, 2022 at the State of California’s option. On September 10, 2018, the Company received a new $3,300,000 order from the City of New York for 50 EV ARC™ units which were delivered in Q4 2018 and in the first half of 2019. We have yet to launch our outdoor media advertising other than signing an agreement with Outfront Media and developing our revenue model with it. Revenue from this business is expected from potential sponsors and from advertisers willing to pay fees to us or to our media partners to display their brands, messages and advertisements on the surfaces of our products or on outdoor digital or static screens mounted on our EV charging solutions. Our energy security business is connected with the deployment of our EV charging infrastructure products and serves as an additional benefit to the value proposition of our charging products which, along with their integrated emergency power panels, can continue to operate and deliver emergency power during utility grid failures. Our onboard state-of-the-art storage batteries installed on our EV chargers provide another reason for certain customers such as municipalities, counties, states, the federal government, hospitals, fire departments, large private enterprises with substantial facilities, and vehicle fleet operators, to buy our products.
We currently do not plan to charge separately for the energy storage capability, which is generally standard on all of our products. For an additional fee, we offer extra storage batteries on particular charging stations.
Our current list of products includes:
1. EV ARC™ Electric Vehicle Autonomous Renewable Charger (patented).
2. Transformer (patented) EV ARC™ 2020 Stowable Electric Vehicle Autonomous Renewable Charger (EV ARCTM 2020).
3. EV ARC™ DC Fast Charging Electric Vehicle Autonomous Renewable Charger (EV ARCTM DCFC).
4. EV ARC™ Media Electric Vehicle Autonomous Renewable Charger with advertising screen and or branding/messaging.
5. EV ARC™ Autonomous Renewable Motorcycle Charger.
6. EV ARC™ Autonomous Renewable Bicycle Charger.
7. ARC Mobility™ Transportation System.
8. The patented Solar Tree® DCFC product, a single-column mounted smart generation and energy storage system with the capability to provide a 50kW DC fast charge to one or more electric vehicles.
In addition, the EV Standard™ is recently patented and UAV ARC™ is patent-pending and are both under development.
Our current products can be upgraded with the addition of the following:
1. EnvisionTrak™ sun tracking technology (patented),
2. Data capture and management (IoT),
3. SunCharge™ solar powered EV charging,
4. ARC™ technology energy storage,
5. E-Power emergency power panels,
6. LED lighting,
7. Media and branding screens, and
8. Security cameras, WiFi, sound, and emergency call boxes.
18
Critical Accounting Policies
Please refer to Note 1 in the financial statements for further information on the Company’s critical accounting policies which are summarized as follows:
Use of Estimates. The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates. Significant estimates in the accompanying financial statements include the allowance for doubtful accounts receivable, valuation of inventory and standard cost allocations, depreciable lives of property and equipment, valuation of intangible assets, estimates of loss contingencies, estimates of the valuation of right of use assets and corresponding lease liabilities, valuation of share-based payments, and the valuation allowance on deferred tax assets.
Accounts Receivable. Accounts receivable are customer obligations due under normal trade terms. Management reviews accounts receivable on a periodic basis to determine if any receivables may become uncollectible. Management’s evaluation includes several factors including the aging of the accounts receivable balances, a review of significant past due accounts, dialogue with the customer, the financial profile of a customer, our historical write-off experience, net of recoveries, and economic conditions. The Company includes any accounts receivable balances that are determined to be uncollectible in its overall allowance for doubtful accounts. Further, the Company may record a general reserve in its allowance for doubtful accounts to account for future changes that may negatively impact our overall collections. After all attempts to collect a receivable have failed, the receivable is written off against the allowance.
Inventory. Inventory is stated at the lower of cost and net realizable value. Cost is determined using the first-in, first-out method of accounting. Inventory costs primarily relate to purchased raw materials and components used in the manufacturing of our products, work in process for products being manufactured, and finished goods. Included in these costs are direct labor and certain manufacturing overhead costs associated with the manufacturing process. The Company regularly reviews inventory components and quantities on hand and performs annual physical inventory counts. A reserve is established if this review process determines the net realizable value of such inventory may be below the carrying value.
Impairment of Long-lived Assets. The Company accounts for long-lived assets in accordance with the provisions of ASC 360-10-35-15 “Impairment or Disposal of Long-Lived Assets.” This guidance requires that long-lived assets and certain identifiable intangibles be reviewed for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable. Recoverability of assets to be held and used is measured by a comparison of the carrying amount of an asset to future undiscounted net cash flows expected to be generated by the asset. If such assets are considered to be impaired, the impairment to be recognized is measured by the amount by which the carrying amount of the assets exceeds the fair value of the assets. Assets to be disposed of are reported at the lower of the carrying amount or fair value less costs to sell.
Accounting for Derivatives. The Company evaluates its convertible instruments, options, warrants or other contracts to determine if those contracts or embedded components of those contracts qualify as derivatives to be separately accounted for under ASC Topic 815, “Derivatives and Hedging.” The result of this accounting treatment is that the fair value of the derivative is marked-to-market each balance sheet date and recorded as a liability. In the event that the fair value is recorded as a liability, the change in fair value is recorded in the statement of operations as other income (expense). Upon conversion of a note where the embedded conversion option has been bifurcated and accounted for as a derivative liability, the Company records the shares at fair value, relieves all related notes, derivatives, and debt discounts, and recognizes a net gain or loss on extinguishment. Equity instruments that are initially classified as equity that become subject to reclassification under ASC Topic 815 are reclassified to liabilities at the fair value of the instrument on the reclassification
Revenue and Cost Recognition. On January 1, 2018, Envision adopted the revenue standards of Financial Accounting Standards Board Update No. 2014-09: “Revenue from Contracts with Customers (Topic 606).” The core principle of this Topic is that an entity recognizes revenue to depict the transfer of promised goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods or services. Revenue is recognized in accordance with that core principle by applying the following five steps: 1) identify the contracts with a customer; 2) identify the performance obligations in the contract; 3) determine the transaction price; 4) allocate the transaction price to the performance obligations; and 5) recognize revenue when (or as) we satisfy a performance obligation.
Revenues are primarily derived from the direct sales of manufactured products. Revenues may also consist of maintenance fees for the maintenance of previously sold products and revenues from sales of professional services.
Revenues from inventoried product sales are recognized upon the final delivery of such product to the customer or when legal transfer of ownership takes place. Revenue values are fixed price arrangements determined at the time an order is placed or a contract is entered into. The customer is typically obligated to make payment for such products within a 30-45 day period after delivery.
Revenues from maintenance fees for services provided by the Company are recognized equally over the period of the maintenance term. Revenue values are fixed price arrangements determined at the time an order is placed or a contract is entered into. The customer is typically obligated to make payment for the service in advance of the maintenance period.
Extended maintenance or warranty services, where the customer has the option to purchase this extension as a separate purchase option, are considered a separate performance obligation. If the company does not control the extended services, in terms of having the responsibility for fulfillment of the obligation or the option to choose who will perform the services, the Company is acting as an agent and would report the revenues on a net basis.
Revenues from professional services are recognized as services are performed. Revenue values are based upon fixed fee arrangements or hourly fee-based arrangements with agreed to hourly rates of service categories in line with expertise requirements. These services are billed to a customer as such services are provided and the customer will be obligated to make payments for such services typically within a 30-45 day period.
The Company has a policy of recording sales incentives as a contra revenue.
The Company includes shipping and handling fees billed to customers as revenues and shipping and handling costs as cost of revenues.
Any deposits received from a customer prior to delivery of the purchased product or monies paid prior to the period for which a service is provided are accounted for as deferred revenue on the balance sheet.
Sales tax is recorded on a net basis and excluded from revenue.
The Company generally provides a standard one-year warranty on its products for materials and workmanship but may provide multiple year warranties as negotiated, and it will pass on the warranties from its vendors, if any, which generally exceeds this one-year period. In accordance with ASC 450-20-25, the Company accrues for product warranties when the loss is probable and can be reasonably estimated. At December 31, 2019 and 2018, the Company has no product warranty accrual given the Company’s fluctuating historical financial warranty expense.
Cost of Revenues. The Company records direct material and component costs, direct labor and associated benefits, and manufacturing overhead costs such as supervision, manufacturing equipment depreciation, rent, and utility costs, all of which are included in inventory prior to a sale, as costs of revenues. The Company further includes shipping and handling fees billed to customers as revenues and shipping and handling costs as cost of revenues.
Changes in Accounting Principles. Other than the adoption of Accounting Standards Update No. 2016-02: “Leases (Topic 842)” on January 1, 2019, there were no significant changes in accounting principles that were adopted during the year ended December 31, 2019.
Results of Operations
Comparison of Results of Operations for Fiscal Years Ended December 31, 2019 and 2018
Revenue. For the year ended December 31, 2019, our revenues were $5,111,545 compared to $6,162,402 for the same period in 2018, a reduction of $1,050,857 or 17%. Revenues for the year ended December 31, 2019 were derived primarily from the sale and delivery of 65 EVARC™ units, compared to 90 units for the year ended December 31, 2018. Revenues from our New York City contract represented $2,240,940 in fiscal year 2019, which was a decrease of $832,516 from fiscal 2018 revenues. Other revenue opportunities did not materialize as quickly as expected due to the timing of budgetary approvals or scheduling of deliveries and were moved to fiscal 2020. Through the end of fiscal 2018 and early fiscal 2019, we had funding constraints due to delays in closing a public offering, which resulted in delays in product development and deliveries and reduced spending on sales and marketing programs, which impacted our ability to develop new customers and markets. However, through the course of 2019, our pipeline of opportunities grew and we are expanding our market opportunities. We hired a Vice President of Sales and Marketing on January 1, 2020, and we are investing in sales and marketing resources and programs to raise awareness of the benefits and value of our products. The receipt of orders will often be uneven due to the timing of customer approvals or budget cycles.
Gross Profit. For the year ended December 31, 2019, we had a gross loss of $153,774 compared to a gross loss of $192,100 for the same period in 2018, a decrease of 20%. The gross loss for the year ended December 31, 2019 improved, despite a 17% decrease in revenues, compared to the year ended December 31, 2018. Gross profit improved on the products we delivered, primarily because our EV ARC™ unit has been in production for several years, and we have made cost improvements and realized labor efficiencies in our production. During fiscal 2019, we designed, developed and shipped two new products – the EV ARC™ 2020 and the EV ARC™ DC Fast Charging unit. During the production of these initial units, we incurred labor variances for start-up inefficiencies and a higher level of scrap than normal, which is expected to improve over time as we gain more experience and improve the production process. We also incurred higher warranty cost in fiscal 2019 due to having more units in the field, and the addition of a field technician to support our customer service levels and improve response times. As our business continues to grow, we expect to see an improvement on our gross profit through better utilization of our manufacturing facility. We have significant room for expansion in our facility. At our current production level, our fixed overhead costs, including rent, indirect labor, utilities and other allocated general overhead costs, are spread across the lower volume of units, resulting in higher overhead applied to each unit. As we increase our volumes, we will be able to realize better absorption of our fixed overhead costs and reduce our cost per unit, improving our gross profit. We are continually looking for ways to improve the product design or production process to reduce our manufacturing costs while maintaining high quality products. As unit sales continue to increase, we will be able to negotiate better volume pricing from our suppliers and benefit from labor efficiency in our production flow. Based on these objectives, management believes that improved gross profits can be realized and maintained. Additionally, during 2018, the Company recorded approximately $72,000 of additional loss contingency related to the purchase order issued from the City of New York.
Operating Expenses. Total operating expenses were $3,117,793 for the year ended December 31, 2019 compared to $2,337,446 for the same period in 2018, a 33% increase. The increase in expense is primarily due to an increase of $248,472 of R&D expenses, including in-house labor and contract engineering, related to the development of the EV ARCTM 2020, the EV ARCTM DC Fast Charging system and the Solar Tree® DC Fast Charging product, $126,500 for severance and recruiting cost related to the Chief Financial Officer position, $99,965 for investor relations and public relations costs, $81,917 for Nasdaq and filing fees due to the registration, $80,000 of consulting fees for a former director for business development, $70,000 for bonus accrual, $55,774 for non-cash compensation expense for the vesting of director restricted shares offset by lower stock option expense and other increases of $17,713.
Provision for Income Taxes. Our tax expense for the year ended December 31, 2019 related to charges for the California Franchise Tax Board based on the minimum tax due and to New York City for Corporation Tax. We did not incur any federal tax liability for the years ended December 31, 2019 or December 31, 2018 because we incurred operating losses for tax purposes in these periods.
Other Income and Expense. Interest expense was $716,337 for the year ended December 31, 2019 compared to $1,089,223 for the same period in 2018, a 34% decrease, due to the repayment of debt during the three months ended June 30, 2019, following the Company’s public offering. Interest income increased by $53,353 due to increased cash deposits. The Company recognized a gain on the sale of a fixed asset in the year ended December 31, 2018, which was not repeated in the year ended December 31, 2019.
Net Loss. We generated net losses of $3,933,922 for the year ended December 31, 2019, compared to a net loss of $3,598,780 for the same period in 2018, a 9% increase. The major components of these losses, and the changes of such between years, are discussed in the above paragraphs.
Liquidity and Capital Resources
At December 31, 2019, we had cash of $3,849,456, compared to cash of $244,024 at December 31, 2018. We have historically met our cash needs through a combination of proceeds from private placements of our securities and from loans, and in April 2019, through a public offering. Our cash requirements are generally for operating activities.
Our cash flows from operating, investing and financing activities, as reflected in the statements of cash flows, are summarized in the table below:
| Cash provided by (used in): | For the Years Ended December 31, 2019 | 2018 |
|---|---|---|
| Net cash used in operating activities | $(4,826,340) | $(712,456) |
| Net cash used in investing activities | $(109,586) | $(32,282) |
| Net cash provided by financing activities | $8,541,358 | $585,287 |
Our operating activities resulted in cash used in operations of $4,826,340 for the year ended December 31, 2019, compared to cash used in operations of $712,456 for the year ended December 31, 2018. Net loss of $3,933,922 for the year ended December 31, 2019 was increased by $974,198 of non-cash expense items that included depreciation and amortization of $40,500, common stock issued for services for director compensation of $355,931, non-cash compensation expense related to grant of stock options of $48,915, $526,423 of amortization of debt discount to interest expense associated with the financings of the current debt facilities, and $2,429 for a provision for doubtful accounts. Further, cash used in operations for the period included increases in prepaid expenses and other current assets of $468,313 for increased vendor prepayments, increased inventory by $110,455, decreases in accounts payable of $883,238, decrease in accrued expenses of $276,284 for the payment of interest and a reversal of the accrued loss for New York shipment, and a decrease in deferred revenue of $742,176 from the shipment of units that we had received prepayments for. Cash provided by operations included a reduction of accounts receivable of $523,739, a $48,672 decrease in deposits for our building lease, an increase of $35,417 for convertible note payable issued in lieu of salary – related party for increased deferred salary, and an increase in sales tax payable of $6,022.
The primary driver of the 2018 net cash used in operations included the net loss of $3,598,780 we experienced in the period offset by various net changes in balance sheet items and other non-cash items recorded in such loss. In 2018, we had non-cash charges consisting of $237,500 of stock issued for director services, $111,572 related to the granting of stock options primarily in 2018, $861,782 related to the amortization of debt discount and $62,839 of depreciation and amortization expenses. Notable balance sheet account changes effecting cash used in operations include an increase in accounts receivable of $1,284,756 related to the sale and delivery of EVARC™ units during the month of December; and increase in prepaid expenses of $230,669 related to deposits made to acquire materials; a decrease in inventory of $1,241,040 which was a result from the sale and delivery of approximately 30 EVARC™ units that were built as of December 31, 2017 but not delivered until 2018; a decrease in deposits of $51,047 primarily related to our facility lease; an increase in accounts payable amounting to $881,967 primarily related to materials purchased for product builds; an increase in accrued expenses of $162,246 including increases in accrued interest and accrued vacation; an increase of $50,000 of deferred salary of our chief executive officer; and increase of $758,271 of deferred revenue from progress payments received from our customer of our first EV ARC™ DC Fast Charging Electric Vehicle Autonomous Renewable Chargers.
Cash used in investing activities included $76,746 to fund patent related costs and $32,840 to purchase equipment in the year ended December 31, 2019. The year ended December 31, 2018 used $59,079 on patent related costs, $23,470 to purchase equipment and generated $50,267 through the sale of equipment.
In 2019, cash generated by our financing activities included $13,201,000 in proceeds we received from issuance of common stock pursuant to a public offering, offset by funding of deferred equity offering costs of $1,175,851, net repayments of our line of credit facility of $960,000, repayments of debt of $2,523,620 and fractional share payments of $171. In 2018, a net of $278,000 generated by financing activities is attributable to the sale of common stock in private placements while we borrowed $750,000 on a note payable and made principal payments amounting to $212,685 on other debt instruments. The Company also funded $195,028 of deferred equity offering costs related to our planned future public offering and paid $35,000 of loan offering costs.
Current assets increased to $6,605,556 at December 31, 2019 from $2,921,763 at December 31, 2018, primarily due to a $3,605,432 increase in cash, while current liabilities decreased to $1,462,837 at December 31, 2019 from $5,681,343 at December 31, 2018, primarily due to the payoff of debt and reduction of accounts payable. As a result, our working capital increased to $5,142,719 at December 31, 2019 from a working capital deficit of $2,759,580 at December 31, 2018.
As of December 31, 2018, the Company had $2,862,940 in short term borrowings net of unamortized debt discounts of $520,696 with an additional $286,528 in long term borrowings. All of our borrowings incurred interest rates between 6.0% and 10% per annum. Payments on the Company’s borrowings restricted cash used for operations during 2019. Two of the short-term borrowing arrangements, from the same lender, were secured by substantially all the assets of the Company. All borrowings have been repaid.
While the Company has been attempting to grow market awareness and focusing on the generation of sales, the Company has not generally earned a gross profit on its sales of products during recent years. However, we believe that we will improve our gross profit as our revenues grow. Management believes that with increased production volumes that we believe are forthcoming, efficiencies will continue to improve, and total per unit production costs will decrease, thus allowing for increasing gross profits on the EV ARC ™ and Solar Tree® products in the future. The Company may continue to rely on capital from the private or public issuance of its securities, generate cash through the exercise of warrants, or if or when needed, initiate future debt instruments until it achieves positive cash flow from its business, which is predicated on increasing sales volumes and the continuation of production cost reduction measures. Management cannot currently predict when or if it will achieve positive cash flow.
Management believes that evolution in the operations of the Company may allow it to execute on its strategic plan and enable it to experience profitable growth in the future. This evolution is anticipated to include the following continual steps: addition of sales personnel and independent sales channels, continued management of overhead costs, increased overhead absorption resulting from revenue growth, process improvements and vendor negotiations leading to cost reductions, increased public awareness of the Company and its products, and the maturation of certain long sales cycle opportunities. Management believes that these steps, if successful, may enable the Company to generate sufficient revenue to continue operations. There is no assurance, however, as to if or when the Company will be able to achieve those operating objectives.
Contractual Obligations
Please refer to Note 13 in the financial statements for further information on the Company’s contractual obligations.
Capitalization
On April 18, 2019, the Company closed an underwritten public offering with Maxim Group LLC (“Maxim”), as representative for the several underwriters (the “Underwriters”), pursuant to which the Company agreed to issue and sell to the Underwriters an aggregate of 2,000,000 units with each unit consisting of one (1) share of the Company’s common stock, par value $0.001 per share (the “Common Stock”), and a warrant to purchase one (1) share of Common Stock at an exercise price equal to $6.30 per share (the “Warrants”). In addition, the Company granted the Underwriters a 45-day option to purchase up to 300,000 additional shares of Common Stock, or Warrants, or any combination thereof, at the public offering price to cover over-allotments, if any. The Common Stock and the Warrants were offered and sold to the public (the “Offering”) pursuant to the Company’s registration statement on Form S-1 (File Nos. 333-226040), filed by the Company with the Securities and Exchange Commission (the “Commission”) on July 2, 2018, as amended, which became effective on April 15, 2019, and a related registration statement filed pursuant to Rule 462 promulgated under the Securities Act of 1933, as amended (the “Securities Act”). The offering price to the public was $6.00 per unit and the Underwriters purchased 2,000,000 units. In addition, the Underwriters purchased 300,000 Warrants for $3,000 upon the exercise of the Underwriters’ over-allotment option. The Company received gross proceeds of approximately $12,003,000, before deducting underwriting discounts and commissions and estimated offering expenses.
Concurrent with the offering, the Company effected a one-for-fifty reverse split of its issued and outstanding common stock (the “Reverse Stock Split”) and reduced the number of authorized shares of common stock from 490,000,000 to 9,800,000. No fractional shares were issued as a result of the Reverse Stock Split. Fractional shares were rounded up or down to the nearest whole share, after aggregating all fractional shares held by a stockholder, resulting in the issuance of 187 round-up shares. Any stockholder holding less than 24 shares of Common Stock on a pre-reverse stock basis were paid in cash for such fractional share of Common Stock, which totaled $171.
On May 15, 2019 the Company closed the Underwriters Second Over-Allotment partial exercise option to purchase 200,000 shares of Common Stock at $5.99 per share (the "Second Over-Allotment Exercise") for additional gross proceeds of $1.198 million, prior to deducting underwriting discounts and commissions and offering expenses payable by the Company, pursuant to and in compliance with the terms and conditions of the previously announced April 16, 2019 Underwriting Agreement and Offering.
Off-Balance Sheet Arrangements
We do not have any off-balance sheet arrangements that have, or are reasonably likely to have, a current or future effect on our financial condition, changes in financial condition, revenues or expenses, results of operations, liquidity, capital expenditures or capital resources, that are material to investors.
Controls and procedures
As filed, 8,459 characters, with its headings, lists and tables. Extracted from the main document; charts and exhibits are in the original on sec.gov.
Evaluation of Disclosure Controls and Procedures
Our management is responsible for establishing and maintaining disclosure controls and procedures that are designed to ensure that information required to be disclosed in our reports under the Securities Exchange Act of 1934 (the “Exchange Act”) is recorded, processed, summarized and reported within the time periods specified in the rules and forms of the Securities and Exchange Commission (the “SEC”), and that such information is accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate, to allow timely decisions regarding required disclosure based closely on the definition of “disclosure controls and procedures” in Rule 15d-15(e) under the Exchange Act. In designing and evaluating the disclosure controls and procedures, management recognized that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving the desired control objectives, and management necessarily was required to apply its judgment in evaluating the cost-benefit relationship of possible controls and procedures.
At the end of the period covered by this Annual Report on Form 10-K, we conducted an evaluation, under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, of the effectiveness of the design and operation of our disclosure controls and procedures. Based upon the foregoing, our Chief Executive Officer and Chief Financial Officer concluded that, as of December 31, 2019, the disclosure controls and procedures of our Company were not effective to ensure that the information required to be disclosed in our Exchange Act reports was recorded, processed, summarized and reported on a timely basis due to material weaknesses in internal controls as identified below under “Management’s Report on Internal Control Over Financial Reporting”. Since the type of material weaknesses identified below have a pervasive effect across the organization, management has determined that these circumstances constitute material weaknesses that therefore affects disclosure controls and procedures.
Management’s Report on Internal Control Over Financial Reporting
Our management is responsible for establishing and maintaining adequate internal controls over financial reporting, as such term is defined in Exchange Act Rule 13a-15(f). The design of any system of controls is based in part upon certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions, regardless of how remote. All internal control systems, no matter how well designed, have inherent limitations. Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate. Therefore, even those systems determined to be effective can provide only reasonable assurance with respect to financial statement preparation and presentation.
During the period covered by this filing, we conducted an evaluation, under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, of the effectiveness of the design and operation of our internal controls over financial reporting. Based upon the foregoing, our Chief Executive Officer and Chief Financial Officer concluded that, as of December 31, 2019, we do not yet have sufficient internal controls over financial reporting and procedures to ensure that all the information required to be disclosed in our Exchange Act reports was recorded, processed, summarized and reported on a timely basis.
The Company is aware of the shortfalls in internal controls over financial reporting and intends to continue to improve its internal control over financial reporting and procedures. We identified the following material weaknesses which exist as of December 31, 2019:
- Because of the size of the Company and the Company’s limited administrative staff, controls related to the segregation of certain duties have not yet been developed or instituted by the Company as of December 31, 2019. Improvements in our disclosure controls and procedures and in our internal control over financial reporting will depend on adding additional finance and accounting staff to provide more internal checks and balances and ensure the necessary segregation of duties for purposes of financial reporting.
- In addition, the Company currently does not have automated manufacturing or purchasing systems in place to track inventory purchases, transactions, bills of material, part numbers, product costing, labor or a perpetual inventory system. The Company performs manual processes during the year to track and control inventory transactions, apply labor and overheads to inventory and to perform a wall to wall physical inventory at the end of the year to confirm the ending inventory balance and valuation. While these processes provide good results in determining inventory and cost of sales transactions, as we grow, it has become a very time-consuming process and could impact our ability to submit timely reporting. A manufacturing system will also provide better management tools to analyze and plan production. This will avoid over-purchasing or shortages of inventory. We plan to implement a manufacturing and purchasing system for the year ending December 31, 2020.
Since these controls have a pervasive effect across the organization, management has determined that these circumstances constitute material weaknesses, based on the criteria established in the “Internal Integrated Framework” issued by COSO in 2013 and as a result, we did not maintain effective internal control over financial reporting as of December 31, 2019.
No Attestation Report by Independent Registered Accountant
The effectiveness of our internal control over financial reporting as of December 31, 2019 has not been audited by our independent registered public accounting firm by virtue of our exemption from such requirement as a smaller reporting company.
Changes in Internal Controls Over Financial Reporting
During the latter part of fiscal 2019, the controls and processes involving the communication, dissemination and disclosure of information have been resolved. The Company hired a new Chief Financial Officer (CFO), and she works closely with the CEO and the management team to ensure that important information, contracts, agreements, commitments and human resource matters are routed through her to ensure they are appropriately reviewed, addressed, executed, communicated to the necessary parties, and also incorporated in our SEC filings, when needed. The senior leadership team has regular meetings to share information and discuss and address important business issues, to ensure that material information is included in our filings. Also, the Board conducts quarterly board meetings, which the CFO attends, to ensure that decisions and commitments are properly reflected in our SEC filings.
In addition, the CFO has hired a new accounting staff member in February 2020 to provide more internal checks and balances and ensuring the necessary segregation of duties within the finance function, as well as to develop and document internal controls and procedures. Management has also begun to search for a new or upgraded Enterprise Resource Planning (ERP) system that will provide better internal controls and procedures over our purchasing and manufacturing processes and better processes to track and maintain our bill of materials and perpetual inventory.
Corrective Action
We have begun to search for a new ERP system which would include manufacturing and purchasing modules. We will also consider interim measures to assist with our processes in the meantime. With the addition of the accounting staff member, we believe that the segregation of duties is much improved. Once we finalize the documentation of procedures, we believe this matter will be resolved and our controls over financial reporting will be much better.
Figures reported in this filing
Standardized line items from the XBRL in this filing, for the period ended 2019-12-31. Comparative periods it repeats are left out.
| Line item | Period | Value | XBRL concept |
|---|---|---|---|
| Revenue | 12 months2019-01-01 to 2019-12-31 | $5.1m | us-gaap:Revenues |
| Cost of revenue | 12 months2019-01-01 to 2019-12-31 | $5.3m | us-gaap:CostOfRevenue |
| Gross profit | 12 months2019-01-01 to 2019-12-31 | −$153.8k | us-gaap:GrossProfit |
| Research and development | 12 months2019-01-01 to 2019-12-31 | $412.6k | us-gaap:ResearchAndDevelopmentExpense |
| Operating income | 12 months2019-01-01 to 2019-12-31 | −$3.3m | us-gaap:OperatingIncomeLoss |
| Interest expense | 12 months2019-01-01 to 2019-12-31 | $716.3k | us-gaap:InterestExpense |
| Income tax | 12 months2019-01-01 to 2019-12-31 | $3.1k | us-gaap:IncomeTaxExpenseBenefit |
| Net income | 12 months2019-01-01 to 2019-12-31 | −$3.9m | us-gaap:NetIncomeLoss |
| Diluted EPS | 12 months2019-01-01 to 2019-12-31 | −$0.88 | us-gaap:EarningsPerShareBasicAndDiluted |
| Operating cash flow | 12 months2019-01-01 to 2019-12-31 | −$4.8m | us-gaap:NetCashProvidedByUsedInOperatingActivities |
| Capital expenditure | 12 months2019-01-01 to 2019-12-31 | $32.8k | us-gaap:PaymentsToAcquirePropertyPlantAndEquipment |
| Cash and equivalents | At period end2019-12-31 | $3.8m | us-gaap:Cash |
| Current assets | At period end2019-12-31 | $6.6m | us-gaap:AssetsCurrent |
| Total assets | At period end2019-12-31 | $7.3m | us-gaap:Assets |
| Current liabilities | At period end2019-12-31 | $1.5m | us-gaap:LiabilitiesCurrent |
| Total liabilities | At period end2019-12-31 | $1.5m | us-gaap:Liabilities |
| Current portion of debt | At period end2019-12-31 | $0 | us-gaap:LongTermDebtCurrent |
| Shareholders' equity | At period end2019-12-31 | $5.8m | us-gaap:StockholdersEquity |
Source: SEC EDGAR, the filing index for accession 0001683168-20-001022. Last ingested by Listed: Nov 6, 2026, 17:25 ET. Listed shows no prices and gives no investment advice.